Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (21 commits)
  USB: musb: fix srp sysfs entry deletion
  USB: musb: resume suspended root hub on disconnect
  USB: musb: use right poll limit for low speed devices
  USB: musb: be careful with 64K+ transfer lengths, host side
  USB: musb: fix data toggle saving with shared FIFO
  USB: musb: host endpoint_disable() oops fixes
  USB: musb: fix urb_dequeue() method
  USB: musb: fix musb_host_tx() for shared endpoint FIFO
  USB: musb: be careful with 64K+ transfer lengths (gadget side)
  usb: musb: make Davinci *work* in mainline
  USB: usb_get_string should check the descriptor type
  USB: gadget: fix build error in omap_apollon_2420_defconfig
  USB: g_file_storage: automatically disable stalls under Atmel
  USB: usb-storage: add IGNORE_RESIDUE flag for Genesys Logic adapters
  USB: Quirk for Hummingbird huc56s / Conexant ACM modem
  USB: serial: add support for second revision of Ericsson F3507G WWAN card
  USB: cdc-acm: add usb id for motomagx phones
  USB: option: add BenQ 3g modem information
  usb: gadget: obex: select correct ep descriptors
  USB: EHCI: slow down ITD reuse
  ...

19 files changed, 176 insertions, 75 deletions

diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c
index a957d239a683..38b6a9ce2a93 100644
--- a/arch/arm/mach-davinci/board-evm.c
+++ b/arch/arm/mach-davinci/board-evm.c
@@ -311,6 +311,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
         gpio_request(gpio + 7, "nCF_SEL");
         gpio_direction_output(gpio + 7, 1);
 
+        /* irlml6401 sustains over 3A, switches 5V in under 8 msec */
+        setup_usb(500, 8);
+
         return 0;
 }
 
@@ -417,9 +420,6 @@ static __init void davinci_evm_init(void)
         platform_add_devices(davinci_evm_devices,
                              ARRAY_SIZE(davinci_evm_devices));
         evm_init_i2c();
-
-        /* irlml6401 sustains over 3A, switches 5V in under 8 msec */
-        setup_usb(500, 8);
 }
 
 static __init void davinci_evm_irq_init(void)
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 28f6dbc95bd7..abb92b7eca0c 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -231,6 +231,11 @@ static struct clk davinci_clks[] = {
                 .lpsc = DAVINCI_LPSC_GPIO,
         },
         {
+                .name = "usb",
+                .rate = &commonrate,
+                .lpsc = DAVINCI_LPSC_USB,
+        },
+        {
                 .name = "AEMIFCLK",
                 .rate = &commonrate,
                 .lpsc = DAVINCI_LPSC_AEMIF,
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index 867ead2559ad..69680784448a 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -47,6 +47,7 @@ static struct musb_hdrc_platform_data usb_data = {
 #elif defined(CONFIG_USB_MUSB_HOST)
         .mode           = MUSB_HOST,
 #endif
+        .clock          = "usb",
         .config         = &musb_config,
 };
 
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 326dd7f65ee9..b3d5a23ab56f 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1376,6 +1376,15 @@ static struct usb_device_id acm_ids[] = {
         { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
         .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
         },
+        { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
+        },
+        { USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
+        .driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on
+                                           data interface instead of
+                                           communications interface.
+                                           Maybe we should define a new
+                                           quirk for this. */
+        },
 
         /* control interfaces with various AT-command sets */
         { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 31fb204f44c6..49e7f56e0d7f 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -653,7 +653,7 @@ int usb_get_descriptor(struct usb_device *dev, unsigned char type,
                 if (result <= 0 && result != -ETIMEDOUT)
                         continue;
                 if (result > 1 && ((u8 *)buf)[1] != type) {
-                        result = -EPROTO;
+                        result = -ENODATA;
                         continue;
                 }
                 break;
@@ -696,8 +696,13 @@ static int usb_get_string(struct usb_device *dev, unsigned short langid,
                         USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
                         (USB_DT_STRING << 8) + index, langid, buf, size,
                         USB_CTRL_GET_TIMEOUT);
-                if (!(result == 0 || result == -EPIPE))
-                        break;
+                if (result == 0 || result == -EPIPE)
+                        continue;
+                if (result > 1 && ((u8 *) buf)[1] != USB_DT_STRING) {
+                        result = -ENODATA;
+                        continue;
+                }
+                break;
         }
         return result;
 }
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 3219d137340a..e55fef52a5dc 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -191,6 +191,7 @@ config USB_GADGET_OMAP
         boolean "OMAP USB Device Controller"
         depends on ARCH_OMAP
         select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
+        select USB_OTG_UTILS if ARCH_OMAP
         help
            Many Texas Instruments OMAP processors have flexible full
            speed USB device controllers, with support for up to 30
diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c
index 80c2e7e9622f..38aa896cc5db 100644
--- a/drivers/usb/gadget/f_obex.c
+++ b/drivers/usb/gadget/f_obex.c
@@ -366,9 +366,9 @@ obex_bind(struct usb_configuration *c, struct usb_function *f)
                 f->hs_descriptors = usb_copy_descriptors(hs_function);
 
                 obex->hs.obex_in = usb_find_endpoint(hs_function,
-                                f->descriptors, &obex_hs_ep_in_desc);
+                                f->hs_descriptors, &obex_hs_ep_in_desc);
                 obex->hs.obex_out = usb_find_endpoint(hs_function,
-                                f->descriptors, &obex_hs_ep_out_desc);
+                                f->hs_descriptors, &obex_hs_ep_out_desc);
         }
 
         /* Avoid letting this gadget enumerate until the userspace
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index b10fa31cc915..1ab9dac7e12d 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -3879,7 +3879,11 @@ static int __init check_parameters(struct fsg_dev *fsg)
         mod_data.protocol_type = USB_SC_SCSI;
         mod_data.protocol_name = "Transparent SCSI";
 
-        if (gadget_is_sh(fsg->gadget))
+        /* Some peripheral controllers are known not to be able to
+         * halt bulk endpoints correctly.  If one of them is present,
+         * disable stalls.
+         */
+        if (gadget_is_sh(fsg->gadget) || gadget_is_at91(fsg->gadget))
                 mod_data.can_stall = 0;
 
         if (mod_data.release == 0xffff) {       // Parameter wasn't set
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index f3c6703cffda..d8d9a52a44b3 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -404,7 +404,10 @@ static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num,
         }
         if (zlt)
                 tmp |= EP_QUEUE_HEAD_ZLT_SEL;
+
         p_QH->max_pkt_length = cpu_to_le32(tmp);
+        p_QH->next_dtd_ptr = 1;
+        p_QH->size_ioc_int_sts = 0;
 
         return;
 }
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 4725d15d096f..e551bb38852b 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -485,6 +485,7 @@ static int ehci_init(struct usb_hcd *hcd)
          * periodic_size can shrink by USBCMD update if hcc_params allows.
          */
         ehci->periodic_size = DEFAULT_I_TDPS;
+        INIT_LIST_HEAD(&ehci->cached_itd_list);
         if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
                 return retval;
 
@@ -497,6 +498,7 @@ static int ehci_init(struct usb_hcd *hcd)
 
         ehci->reclaim = NULL;
         ehci->next_uframe = -1;
+        ehci->clock_frame = -1;
 
         /*
          * dedicate a qh for the async ring head, since we couldn't unlink
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index 0431397836f6..10d52919abbb 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -128,6 +128,7 @@ static inline void qh_put (struct ehci_qh *qh)
 
 static void ehci_mem_cleanup (struct ehci_hcd *ehci)
 {
+        free_cached_itd_list(ehci);
         if (ehci->async)
                 qh_put (ehci->async);
         ehci->async = NULL;
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index a081ee65bde6..07bcb931021b 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1004,7 +1004,8 @@ iso_stream_put(struct ehci_hcd *ehci, struct ehci_iso_stream *stream)
 
                 is_in = (stream->bEndpointAddress & USB_DIR_IN) ? 0x10 : 0;
                 stream->bEndpointAddress &= 0x0f;
-                stream->ep->hcpriv = NULL;
+                if (stream->ep)
+                        stream->ep->hcpriv = NULL;
 
                 if (stream->rescheduled) {
                         ehci_info (ehci, "ep%d%s-iso rescheduled "
@@ -1653,14 +1654,28 @@ itd_complete (
                         (stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out");
         }
         iso_stream_put (ehci, stream);
-        /* OK to recycle this ITD now that its completion callback ran. */
+
 done:
         usb_put_urb(urb);
         itd->urb = NULL;
-        itd->stream = NULL;
-        list_move(&itd->itd_list, &stream->free_list);
-        iso_stream_put(ehci, stream);
-
+        if (ehci->clock_frame != itd->frame || itd->index[7] != -1) {
+                /* OK to recycle this ITD now. */
+                itd->stream = NULL;
+                list_move(&itd->itd_list, &stream->free_list);
+                iso_stream_put(ehci, stream);
+        } else {
+                /* HW might remember this ITD, so we can't recycle it yet.
+                 * Move it to a safe place until a new frame starts.
+                 */
+                list_move(&itd->itd_list, &ehci->cached_itd_list);
+                if (stream->refcount == 2) {
+                        /* If iso_stream_put() were called here, stream
+                         * would be freed.  Instead, just prevent reuse.
+                         */
+                        stream->ep->hcpriv = NULL;
+                        stream->ep = NULL;
+                }
+        }
         return retval;
 }
 
@@ -2101,6 +2116,20 @@ done:
 
 /*-------------------------------------------------------------------------*/
 
+static void free_cached_itd_list(struct ehci_hcd *ehci)
+{
+        struct ehci_itd *itd, *n;
+
+        list_for_each_entry_safe(itd, n, &ehci->cached_itd_list, itd_list) {
+                struct ehci_iso_stream  *stream = itd->stream;
+                itd->stream = NULL;
+                list_move(&itd->itd_list, &stream->free_list);
+                iso_stream_put(ehci, stream);
+        }
+}
+
+/*-------------------------------------------------------------------------*/
+
 static void
 scan_periodic (struct ehci_hcd *ehci)
 {
@@ -2115,10 +2144,17 @@ scan_periodic (struct ehci_hcd *ehci)
          * Touches as few pages as possible:  cache-friendly.
          */
         now_uframe = ehci->next_uframe;
-        if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
+        if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
                 clock = ehci_readl(ehci, &ehci->regs->frame_index);
-        else
+                clock_frame = (clock >> 3) % ehci->periodic_size;
+        } else  {
                 clock = now_uframe + mod - 1;
+                clock_frame = -1;
+        }
+        if (ehci->clock_frame != clock_frame) {
+                free_cached_itd_list(ehci);
+                ehci->clock_frame = clock_frame;
+        }
         clock %= mod;
         clock_frame = clock >> 3;
 
@@ -2277,6 +2313,10 @@ restart:
                         /* rescan the rest of this frame, then ... */
                         clock = now;
                         clock_frame = clock >> 3;
+                        if (ehci->clock_frame != clock_frame) {
+                                free_cached_itd_list(ehci);
+                                ehci->clock_frame = clock_frame;
+                        }
                 } else {
                         now_uframe++;
                         now_uframe %= mod;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index fb7054ccf4fc..262b00c9b334 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -87,6 +87,10 @@ struct ehci_hcd {			/* one per controller */
         int                     next_uframe;    /* scan periodic, start here */
         unsigned                periodic_sched; /* periodic activity count */
 
+        /* list of itds completed while clock_frame was still active */
+        struct list_head        cached_itd_list;
+        unsigned                clock_frame;
+
         /* per root hub port */
         unsigned long           reset_done [EHCI_MAX_ROOT_PORTS];
 
@@ -220,6 +224,8 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
         }
 }
 
+static void free_cached_itd_list(struct ehci_hcd *ehci);
+
 /*-------------------------------------------------------------------------*/
 
 #include <linux/usb/ehci_def.h>
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 5a8fd5d57a11..2dc7606f319c 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -377,18 +377,8 @@ int __init musb_platform_init(struct musb *musb)
         u32             revision;
 
         musb->mregs += DAVINCI_BASE_OFFSET;
-#if 0
-        /* REVISIT there's something odd about clocking, this
-         * didn't appear do the job ...
-         */
-        musb->clock = clk_get(pDevice, "usb");
-        if (IS_ERR(musb->clock))
-                return PTR_ERR(musb->clock);
 
-        status = clk_enable(musb->clock);
-        if (status < 0)
-                return -ENODEV;
-#endif
+        clk_enable(musb->clock);
 
         /* returns zero if e.g. not clocked */
         revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
@@ -453,5 +443,8 @@ int musb_platform_exit(struct musb *musb)
         }
 
         phy_off();
+
+        clk_disable(musb->clock);
+
         return 0;
 }
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 2cc34fa05b73..af77e4659006 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -115,7 +115,7 @@
 
 
 unsigned musb_debug;
-module_param(musb_debug, uint, S_IRUGO | S_IWUSR);
+module_param_named(debug, musb_debug, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug message level. Default = 0");
 
 #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
@@ -767,6 +767,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
                 case OTG_STATE_A_HOST:
                 case OTG_STATE_A_SUSPEND:
+                        usb_hcd_resume_root_hub(musb_to_hcd(musb));
                         musb_root_disconnect(musb);
                         if (musb->a_wait_bcon != 0)
                                 musb_platform_try_idle(musb, jiffies
@@ -1815,7 +1816,7 @@ static void musb_free(struct musb *musb)
 #ifdef CONFIG_SYSFS
         device_remove_file(musb->controller, &dev_attr_mode);
         device_remove_file(musb->controller, &dev_attr_vbus);
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
         device_remove_file(musb->controller, &dev_attr_srp);
 #endif
 #endif
@@ -2063,7 +2064,7 @@ fail2:
 #ifdef CONFIG_SYSFS
         device_remove_file(musb->controller, &dev_attr_mode);
         device_remove_file(musb->controller, &dev_attr_vbus);
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
         device_remove_file(musb->controller, &dev_attr_srp);
 #endif
 #endif
@@ -2243,10 +2244,10 @@ static int __init musb_init(void)
         return platform_driver_probe(&musb_driver, musb_probe);
 }
 
-/* make us init after usbcore and before usb
- * gadget and host-side drivers start to register
+/* make us init after usbcore and i2c (transceivers, regulators, etc)
+ * and before usb gadget and host-side drivers start to register
  */
-subsys_initcall(musb_init);
+fs_initcall(musb_init);
 
 static void __exit musb_cleanup(void)
 {
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 4ea305387981..c7ebd0867fcc 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -575,7 +575,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
         struct usb_request      *request = &req->request;
         struct musb_ep          *musb_ep = &musb->endpoints[epnum].ep_out;
         void __iomem            *epio = musb->endpoints[epnum].regs;
-        u16                     fifo_count = 0;
+        unsigned                fifo_count = 0;
         u16                     len = musb_ep->packet_sz;
 
         csr = musb_readw(epio, MUSB_RXCSR);
@@ -687,7 +687,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
                                         len, fifo_count,
                                         musb_ep->packet_sz);
 
-                        fifo_count = min(len, fifo_count);
+                        fifo_count = min_t(unsigned, len, fifo_count);
 
 #ifdef  CONFIG_USB_TUSB_OMAP_DMA
                         if (tusb_dma_omap() && musb_ep->dma) {
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index a035ceccf950..6dbbd0786a6a 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -335,16 +335,11 @@ musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb)
 static struct musb_qh *
 musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
 {
-        int                     is_in;
         struct musb_hw_ep       *ep = qh->hw_ep;
         struct musb             *musb = ep->musb;
+        int                     is_in = usb_pipein(urb->pipe);
         int                     ready = qh->is_ready;
 
-        if (ep->is_shared_fifo)
-                is_in = 1;
-        else
-                is_in = usb_pipein(urb->pipe);
-
         /* save toggle eagerly, for paranoia */
         switch (qh->type) {
         case USB_ENDPOINT_XFER_BULK:
@@ -432,7 +427,7 @@ musb_advance_schedule(struct musb *musb, struct urb *urb,
         else
                 qh = musb_giveback(qh, urb, urb->status);
 
-        if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) {
+        if (qh != NULL && qh->is_ready) {
                 DBG(4, "... next ep%d %cX urb %p\n",
                                 hw_ep->epnum, is_in ? 'R' : 'T',
                                 next_urb(qh));
@@ -942,8 +937,8 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb)
         switch (musb->ep0_stage) {
         case MUSB_EP0_IN:
                 fifo_dest = urb->transfer_buffer + urb->actual_length;
-                fifo_count = min(len, ((u16) (urb->transfer_buffer_length
-                                        - urb->actual_length)));
+                fifo_count = min_t(size_t, len, urb->transfer_buffer_length -
+                                   urb->actual_length);
                 if (fifo_count < len)
                         urb->status = -EOVERFLOW;
 
@@ -976,10 +971,9 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb)
                 }
                 /* FALLTHROUGH */
         case MUSB_EP0_OUT:
-                fifo_count = min(qh->maxpacket, ((u16)
-                                (urb->transfer_buffer_length
-                                - urb->actual_length)));
-
+                fifo_count = min_t(size_t, qh->maxpacket,
+                                   urb->transfer_buffer_length -
+                                   urb->actual_length);
                 if (fifo_count) {
                         fifo_dest = (u8 *) (urb->transfer_buffer
                                         + urb->actual_length);
@@ -1161,7 +1155,8 @@ void musb_host_tx(struct musb *musb, u8 epnum)
         struct urb              *urb;
         struct musb_hw_ep       *hw_ep = musb->endpoints + epnum;
         void __iomem            *epio = hw_ep->regs;
-        struct musb_qh          *qh = hw_ep->out_qh;
+        struct musb_qh          *qh = hw_ep->is_shared_fifo ? hw_ep->in_qh
+                                                            : hw_ep->out_qh;
         u32                     status = 0;
         void __iomem            *mbase = musb->mregs;
         struct dma_channel      *dma;
@@ -1308,7 +1303,8 @@ void musb_host_tx(struct musb *musb, u8 epnum)
                  * packets before updating TXCSR ... other docs disagree ...
                  */
                 /* PIO:  start next packet in this URB */
-                wLength = min(qh->maxpacket, (u16) wLength);
+                if (wLength > qh->maxpacket)
+                        wLength = qh->maxpacket;
                 musb_write_fifo(hw_ep, wLength, buf);
                 qh->segsize = wLength;
 
@@ -1867,19 +1863,21 @@ static int musb_urb_enqueue(
         }
         qh->type_reg = type_reg;
 
-        /* precompute rxinterval/txinterval register */
-        interval = min((u8)16, epd->bInterval); /* log encoding */
+        /* Precompute RXINTERVAL/TXINTERVAL register */
         switch (qh->type) {
         case USB_ENDPOINT_XFER_INT:
-                /* fullspeed uses linear encoding */
-                if (USB_SPEED_FULL == urb->dev->speed) {
-                        interval = epd->bInterval;
-                        if (!interval)
-                                interval = 1;
+                /*
+                 * Full/low speeds use the  linear encoding,
+                 * high speed uses the logarithmic encoding.
+                 */
+                if (urb->dev->speed <= USB_SPEED_FULL) {
+                        interval = max_t(u8, epd->bInterval, 1);
+                        break;
                 }
                 /* FALLTHROUGH */
         case USB_ENDPOINT_XFER_ISOC:
-                /* iso always uses log encoding */
+                /* ISO always uses logarithmic encoding */
+                interval = min_t(u8, epd->bInterval, 16);
                 break;
         default:
                 /* REVISIT we actually want to use NAK limits, hinting to the
@@ -2037,9 +2035,9 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
                 goto done;
 
         /* Any URB not actively programmed into endpoint hardware can be
-         * immediately given back.  Such an URB must be at the head of its
+         * immediately given back; that's any URB not at the head of an
          * endpoint queue, unless someday we get real DMA queues.  And even
-         * then, it might not be known to the hardware...
+         * if it's at the head, it might not be known to the hardware...
          *
          * Otherwise abort current transfer, pending dma, etc.; urb->status
          * has already been updated.  This is a synchronous abort; it'd be
@@ -2078,6 +2076,15 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
                 qh->is_ready = 0;
                 __musb_giveback(musb, urb, 0);
                 qh->is_ready = ready;
+
+                /* If nothing else (usually musb_giveback) is using it
+                 * and its URB list has emptied, recycle this qh.
+                 */
+                if (ready && list_empty(&qh->hep->urb_list)) {
+                        qh->hep->hcpriv = NULL;
+                        list_del(&qh->ring);
+                        kfree(qh);
+                }
         } else
                 ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
 done:
@@ -2093,15 +2100,16 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
         unsigned long           flags;
         struct musb             *musb = hcd_to_musb(hcd);
         u8                      is_in = epnum & USB_DIR_IN;
-        struct musb_qh          *qh = hep->hcpriv;
-        struct urb              *urb, *tmp;
+        struct musb_qh          *qh;
+        struct urb              *urb;
         struct list_head        *sched;
 
-        if (!qh)
-                return;
-
         spin_lock_irqsave(&musb->lock, flags);
 
+        qh = hep->hcpriv;
+        if (qh == NULL)
+                goto exit;
+
         switch (qh->type) {
         case USB_ENDPOINT_XFER_CONTROL:
                 sched = &musb->control;
@@ -2135,13 +2143,28 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
 
                 /* cleanup */
                 musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
-        } else
-                urb = NULL;
 
-        /* then just nuke all the others */
-        list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list)
-                musb_giveback(qh, urb, -ESHUTDOWN);
+                /* Then nuke all the others ... and advance the
+                 * queue on hw_ep (e.g. bulk ring) when we're done.
+                 */
+                while (!list_empty(&hep->urb_list)) {
+                        urb = next_urb(qh);
+                        urb->status = -ESHUTDOWN;
+                        musb_advance_schedule(musb, urb, qh->hw_ep, is_in);
+                }
+        } else {
+                /* Just empty the queue; the hardware is busy with
+                 * other transfers, and since !qh->is_ready nothing
+                 * will activate any of these as it advances.
+                 */
+                while (!list_empty(&hep->urb_list))
+                        __musb_giveback(musb, next_urb(qh), -ESHUTDOWN);
 
+                hep->hcpriv = NULL;
+                list_del(&qh->ring);
+                kfree(qh);
+        }
+exit:
         spin_unlock_irqrestore(&musb->lock, flags);
 }
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index bfd0b68ceccd..b7c132bded7f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -294,7 +294,11 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 
 /* Ericsson products */
 #define ERICSSON_VENDOR_ID                      0x0bdb
-#define ERICSSON_PRODUCT_F3507G                 0x1900
+#define ERICSSON_PRODUCT_F3507G_1               0x1900
+#define ERICSSON_PRODUCT_F3507G_2               0x1902
+
+#define BENQ_VENDOR_ID                          0x04a5
+#define BENQ_PRODUCT_H10                        0x4068
 
 static struct usb_device_id option_ids[] = {
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
@@ -509,7 +513,10 @@ static struct usb_device_id option_ids[] = {
         { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) },
         { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
         { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
-        { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) },
+        { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_1) },
+        { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_2) },
+        { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
+        { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
         { } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 50dc33a6065b..6f59c8e510ea 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -907,13 +907,13 @@ UNUSUAL_DEV(  0x05e3, 0x0701, 0x0000, 0xffff,
                 "Genesys Logic",
                 "USB to IDE Optical",
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
-                US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
+                US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
 
 UNUSUAL_DEV(  0x05e3, 0x0702, 0x0000, 0xffff,
                 "Genesys Logic",
                 "USB to IDE Disk",
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
-                US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
+                US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Ben Efros <ben@pc-doctor.com> */
 UNUSUAL_DEV(  0x05e3, 0x0723, 0x9451, 0x9451,