[SCTP]: protocol definitions for SCTP-AUTH implementation

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 99 insertions, 1 deletions

diff --git a/include/linux/sctp.h b/include/linux/sctp.h
index f4d717b72ddd..5eb38cc0e5a4 100644
--- a/include/linux/sctp.h
+++ b/include/linux/sctp.h
@@ -102,6 +102,9 @@ typedef enum {
         SCTP_CID_ECN_CWR                = 13,
         SCTP_CID_SHUTDOWN_COMPLETE      = 14,
 
+        /* AUTH Extension Section 4.1 */
+        SCTP_CID_AUTH                   = 0x0F,
+
         /* PR-SCTP Sec 3.2 */
         SCTP_CID_FWD_TSN                = 0xC0,
 
@@ -180,6 +183,11 @@ typedef enum {
         SCTP_PARAM_SUPPORTED_ADDRESS_TYPES      = __constant_htons(12),
         SCTP_PARAM_ECN_CAPABLE                  = __constant_htons(0x8000),
 
+        /* AUTH Extension Section 3 */
+        SCTP_PARAM_RANDOM                       = __constant_htons(0x8002),
+        SCTP_PARAM_CHUNKS                       = __constant_htons(0x8003),
+        SCTP_PARAM_HMAC_ALGO                    = __constant_htons(0x8004),
+
         /* Add-IP: Supported Extensions, Section 4.2 */
         SCTP_PARAM_SUPPORTED_EXT        = __constant_htons(0x8008),
 
@@ -305,6 +313,24 @@ typedef struct sctp_supported_ext_param {
         __u8 chunks[0];
 } __attribute__((packed)) sctp_supported_ext_param_t;
 
+/* AUTH Section 3.1 Random */
+typedef struct sctp_random_param {
+        sctp_paramhdr_t param_hdr;
+        __u8 random_val[0];
+} __attribute__((packed)) sctp_random_param_t;
+
+/* AUTH Section 3.2 Chunk List */
+typedef struct sctp_chunks_param {
+        sctp_paramhdr_t param_hdr;
+        __u8 chunks[0];
+} __attribute__((packed)) sctp_chunks_param_t;
+
+/* AUTH Section 3.3 HMAC Algorithm */
+typedef struct sctp_hmac_algo_param {
+        sctp_paramhdr_t param_hdr;
+        __be16 hmac_ids[0];
+} __attribute__((packed)) sctp_hmac_algo_param_t;
+
 /* RFC 2960.  Section 3.3.3 Initiation Acknowledgement (INIT ACK) (2):
  *   The INIT ACK chunk is used to acknowledge the initiation of an SCTP
  *   association.
@@ -471,7 +497,19 @@ typedef enum {
         SCTP_ERROR_RSRC_LOW     = __constant_htons(0x0101),
         SCTP_ERROR_DEL_SRC_IP   = __constant_htons(0x0102),
         SCTP_ERROR_ASCONF_ACK   = __constant_htons(0x0103),
-        SCTP_ERROR_REQ_REFUSED  = __constant_htons(0x0104)
+        SCTP_ERROR_REQ_REFUSED  = __constant_htons(0x0104),
+
+        /* AUTH Section 4.  New Error Cause
+         *
+         * This section defines a new error cause that will be sent if an AUTH
+         * chunk is received with an unsupported HMAC identifier.
+         * illustrates the new error cause.
+         *
+         * Cause Code      Error Cause Name
+         * --------------------------------------------------------------
+         * 0x0105          Unsupported HMAC Identifier
+         */
+         SCTP_ERROR_UNSUP_HMAC  = __constant_htons(0x0105)
 } sctp_error_t;
 
 
@@ -609,4 +647,64 @@ typedef struct sctp_addip_chunk {
         sctp_addiphdr_t addip_hdr;
 } __attribute__((packed)) sctp_addip_chunk_t;
 
+/* AUTH
+ * Section 4.1  Authentication Chunk (AUTH)
+ *
+ *   This chunk is used to hold the result of the HMAC calculation.
+ *
+ *    0                   1                   2                   3
+ *    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *   | Type = 0x0F   |   Flags=0     |             Length            |
+ *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *   |     Shared Key Identifier     |   HMAC Identifier             |
+ *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *   |                                                               |
+ *   \                             HMAC                              /
+ *   /                                                               \
+ *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *   Type: 1 byte (unsigned integer)
+ *      This value MUST be set to 0x0F for  all AUTH-chunks.
+ *
+ *   Flags: 1 byte (unsigned integer)
+ *      Set to zero on transmit and ignored on receipt.
+ *
+ *   Length: 2 bytes (unsigned integer)
+ *      This value holds the length of the HMAC in bytes plus 8.
+ *
+ *  Shared Key Identifier: 2 bytes (unsigned integer)
+ *      This value describes which endpoint pair shared key is used.
+ *
+ *   HMAC Identifier: 2 bytes (unsigned integer)
+ *      This value describes which message digest is being used.  Table 2
+ *      shows the currently defined values.
+ *
+ *    The following Table 2 shows the currently defined values for HMAC
+ *       identifiers.
+ *
+ *       +-----------------+--------------------------+
+ *       | HMAC Identifier | Message Digest Algorithm |
+ *       +-----------------+--------------------------+
+ *       | 0               | Reserved                 |
+ *       | 1               | SHA-1 defined in [8]     |
+ *       | 2               | Reserved                 |
+ *       | 3               | SHA-256 defined in [8]   |
+ *       +-----------------+--------------------------+
+ *
+ *
+ *   HMAC: n bytes (unsigned integer) This hold the result of the HMAC
+ *      calculation.
+ */
+typedef struct sctp_authhdr {
+        __be16 shkey_id;
+        __be16 hmac_id;
+        __u8   hmac[0];
+} __attribute__((packed)) sctp_authhdr_t;
+
+typedef struct sctp_auth_chunk {
+        sctp_chunkhdr_t chunk_hdr;
+        sctp_authhdr_t auth_hdr;
+} __attribute__((packed)) sctp_auth_chunk_t;
+
 #endif /* __LINUX_SCTP_H__ */