Fix misc Kconfig typos

Fix various Kconfig typos.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

24 files changed, 34 insertions, 34 deletions

diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 57f23b465392..e316bd93313f 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -133,7 +133,7 @@ config IXP4XX_INDIRECT_PCI
              into the kernel and we can use the standard read[bwl]/write[bwl]
              macros. This is the preferred method due to speed but it
              limits the system to just 64MB of PCI memory. This can be 
-             problamatic if using video cards and other memory-heavy devices.
+             problematic if using video cards and other memory-heavy devices.
           
           2) If > 64MB of memory space is required, the IXP4xx can be 
              configured to use indirect registers to access PCI This allows 
diff --git a/arch/arm/mach-lh7a40x/Kconfig b/arch/arm/mach-lh7a40x/Kconfig
index 147b01928a9b..6f4c6a1798c1 100644
--- a/arch/arm/mach-lh7a40x/Kconfig
+++ b/arch/arm/mach-lh7a40x/Kconfig
@@ -8,7 +8,7 @@ config MACH_KEV7A400
         help
           Say Y here if you are using the Sharp KEV7A400 development
           board.  This hardware is discontinued, so I'd be very
-          suprised if you wanted this option.
+          surprised if you wanted this option.
 
 config MACH_LPD7A400
         bool "LPD7A400 Card Engine"
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 63965c78de8c..9aa26b99045d 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -91,7 +91,7 @@ config SMDK2440_CPU2442
 config MACH_S3C2413
         bool
         help
-          Internal node for S3C2413 verison of SMDK2413, so that
+          Internal node for S3C2413 version of SMDK2413, so that
           machine_is_s3c2413() will work when MACH_SMDK2413 is
           selected
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c0bfb8212b77..b09a19f87d68 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -197,7 +197,7 @@ config CPU_ARM940T
         select CPU_CP15_MPU
         help
           ARM940T is a member of the ARM9TDMI family of general-
-          purpose microprocessors with MPU and seperate 4KB
+          purpose microprocessors with MPU and separate 4KB
           instruction and 4KB data cases, each with a 4-word line
           length.
 
diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig
index 44eb1b9accb3..c7ea9efd0104 100644
--- a/arch/cris/arch-v10/Kconfig
+++ b/arch/cris/arch-v10/Kconfig
@@ -323,7 +323,7 @@ config ETRAX_DEF_R_WAITSTATES
         depends on ETRAX_ARCH_V10
         default "95a6"
         help
-          Waitstates for SRAM, Flash and peripherials (not DRAM).  95f8 is a
+          Waitstates for SRAM, Flash and peripherals (not DRAM).  95f8 is a
           good choice for most Axis products...
 
 config ETRAX_DEF_R_BUS_CONFIG
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 734d5f3a5304..e7e724bc0ba6 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -839,7 +839,7 @@ config ETRAX_DS1302_TRICKLE_CHARGE
         default "0"
         help
           This controls the initial value of the trickle charge register.
-          0 = disabled (use this if you are unsure or have a non rechargable battery)
+          0 = disabled (use this if you are unsure or have a non rechargeable battery)
           Otherwise the following values can be OR:ed together to control the
           charge current:
           1 = 2kohm, 2 = 4kohm, 3 = 4kohm
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index a33097f95362..f64624fc4504 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -88,7 +88,7 @@ config ETRAX_SERIAL_PORT0_DMA7_IN
         help
           Enables the DMA7 input channel for ser0 (ttyS0).
           If you do not enable DMA, an interrupt for each character will be
-          used when receiveing data.
+          used when receiving data.
           Normally you want to use DMA, unless you use the DMA channel for
           something else.
 
@@ -157,7 +157,7 @@ config ETRAX_SERIAL_PORT1_DMA5_IN
         help
           Enables the DMA5 input channel for ser1 (ttyS1).
           If you do not enable DMA, an interrupt for each character will be
-          used when receiveing data.
+          used when receiving data.
           Normally you want this on, unless you use the DMA channel for
           something else.
 
@@ -228,7 +228,7 @@ config ETRAX_SERIAL_PORT2_DMA3_IN
         help
           Enables the DMA3 input channel for ser2 (ttyS2).
           If you do not enable DMA, an interrupt for each character will be
-          used when receiveing data.
+          used when receiving data.
           Normally you want to use DMA, unless you use the DMA channel for
           something else.
 
@@ -297,7 +297,7 @@ config ETRAX_SERIAL_PORT3_DMA9_IN
         help
           Enables the DMA9 input channel for ser3 (ttyS3).
           If you do not enable DMA, an interrupt for each character will be
-          used when receiveing data.
+          used when receiving data.
           Normally you want to use DMA, unless you use the DMA channel for
           something else.
 
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 6d920d4bdc3d..c1bc22c6d0d8 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -565,7 +565,7 @@ config ROMVEC
         depends on ROM
         help
           This is almost always the same as the base of the ROM. Since on all
-          68000 type varients the vectors are at the base of the boot device
+          68000 type variants the vectors are at the base of the boot device
           on system startup.
 
 config ROMVECSIZE
@@ -574,7 +574,7 @@ config ROMVECSIZE
         depends on ROM
         help
           Define the size of the vector region in ROM. For most 68000
-          varients this would be 0x400 bytes in size. Set to 0 if you do
+          variants this would be 0x400 bytes in size. Set to 0 if you do
           not want a vector region at the start of the ROM.
 
 config ROMSTART
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 1443024b1c7c..22bb540b5c05 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -865,7 +865,7 @@ config MIPS_DISABLE_OBSOLETE_IDE
         bool
 
 #
-# Endianess selection.  Suffiently obscure so many users don't know what to
+# Endianess selection.  Sufficiently obscure so many users don't know what to
 # answer,so we try hard to limit the available choices.  Also the use of a
 # choice statement should be more obvious to the user.
 #
@@ -874,7 +874,7 @@ choice
         help
           Some MIPS machines can be configured for either little or big endian
           byte order. These modes require different kernels and a different
-          Linux distribution.  In general there is one prefered byteorder for a
+          Linux distribution.  In general there is one preferred byteorder for a
           particular system but some systems are just as commonly used in the
           one or the other endianess.
 
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 0673dbedb241..116d7d3683ed 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -425,7 +425,7 @@ config PPC_MAPLE
         default n
         help
           This option enables support for the Maple 970FX Evaluation Board.
-          For more informations, refer to <http://www.970eval.com>
+          For more information, refer to <http://www.970eval.com>
 
 config PPC_PASEMI
         depends on PPC_MULTIPLATFORM && PPC64
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 7edb6b461382..edcd5b875b66 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -21,7 +21,7 @@ config MPC834x_SYS
           Be aware that PCI buses can only function when SYS board is plugged
           into the PIB (Platform IO Board) board from Freescale which provide
           3 PCI slots.  The PIBs PCI initialization is the bootloader's
-          responsiblilty.
+          responsibility.
 
 config MPC834x_ITX
         bool "Freescale MPC834x ITX"
@@ -30,7 +30,7 @@ config MPC834x_ITX
           This option enables support for the MPC 834x ITX evaluation board.
 
           Be aware that PCI initialization is the bootloader's
-          responsiblilty.
+          responsibility.
 
 config MPC8360E_PB
         bool "Freescale MPC8360E PB"
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 077711e63104..ef018e25fb07 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -724,7 +724,7 @@ config MPC834x_SYS
           Be aware that PCI buses can only function when SYS board is plugged
           into the PIB (Platform IO Board) board from Freescale which provide
           3 PCI slots.  The PIBs PCI initialization is the bootloader's
-          responsiblilty.
+          responsibility.
 
 config EV64360
         bool "Marvell-EV64360BP"
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 6a461d4caeff..bffc7e176970 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -217,7 +217,7 @@ config SH_SHMIN
         bool "SHMIN"
         select CPU_SUBTYPE_SH7706
         help
-          Select SHMIN if configureing for the SHMIN board
+          Select SHMIN if configuring for the SHMIN board.
 
 config SH_UNKNOWN
         bool "BareCPU"
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 2f96610a83e9..92a7c8a636d3 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -212,8 +212,8 @@ config SPARC_LED
         tristate "Sun4m LED driver"
         help
           This driver toggles the front-panel LED on sun4m systems
-          in a user-specifyable manner.  It's state can be probed
-          by reading /proc/led and it's blinking mode can be changed
+          in a user-specifiable manner.  Its state can be probed
+          by reading /proc/led and its blinking mode can be changed
           via writes to /proc/led
 
 source "fs/Kconfig.binfmt"
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 2af12fc45115..ad8b537ad47b 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -994,7 +994,7 @@ config HPET
         help
           If you say Y here, you will have a miscdevice named "/dev/hpet/".  Each
           open selects one of the timers supported by the HPET.  The timers are
-          non-periodioc and/or periodic.
+          non-periodic and/or periodic.
 
 config HPET_RTC_IRQ
         bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index bf267552941f..b8fde5cf4735 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -24,7 +24,7 @@ config VIDEO_HELPER_CHIPS_AUTO
           decode audio/video standards. This option will autoselect
           all pertinent modules to each selected video module.
 
-          Unselect this only if you know exaclty what you are doing, since
+          Unselect this only if you know exactly what you are doing, since
           it may break support on some boards.
 
           In doubt, say Y.
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 24747bdc3e19..d132ed571f13 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -607,7 +607,7 @@ config MTD_BAST_MAXSIZE
         default "4"
 
 config MTD_SHARP_SL
-        bool "ROM maped on Sharp SL Series"
+        bool "ROM mapped on Sharp SL Series"
         depends on MTD && ARCH_PXA
         help
           This enables access to the flash chip on the Sharp SL Series of PDAs.
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 6e863aa9894c..b6c70c58ae99 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -32,7 +32,7 @@ config IFB
         tristate "Intermediate Functional Block support"
         depends on NET_CLS_ACT
         ---help---
-          This is an intermidiate driver that allows sharing of
+          This is an intermediate driver that allows sharing of
           resources.
           To compile this driver as a module, choose M here: the module
           will be called ifb.  If you want to use more than one ifb
@@ -2136,7 +2136,7 @@ config SK98LIN
           This driver supports the original Yukon chipset. A cleaner driver is 
           also available (skge) which seems to work better than this one.
 
-          This driver does not support the newer Yukon2 chipset. A seperate
+          This driver does not support the newer Yukon2 chipset. A separate
           driver, sky2, is provided to support Yukon2-based adapters.
 
           The following adapters are supported by this driver:
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index b79ec0d7480f..ecb61f876f27 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -61,8 +61,8 @@ config FIXED_PHY
         depends on PHYLIB
         ---help---
           Adds the driver to PHY layer to cover the boards that do not have any PHY bound,
-          but with the ability to manipulate with speed/link in software. The relavant MII
-          speed/duplex parameters could be effectively handled in user-specified  fuction.
+          but with the ability to manipulate the speed/link in software. The relevant MII
+          speed/duplex parameters could be effectively handled in a user-specified function.
           Currently tested with mpc866ads.
 
 config FIXED_MII_10_FDX
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 5f1b9f58070e..d0ba112355cc 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -27,7 +27,7 @@ config PCI_MULTITHREAD_PROBE
           smaller speedup on single processor machines.
 
           But it can also cause lots of bad things to happen.  A number
-          of PCI drivers can not properly handle running in this way,
+          of PCI drivers cannot properly handle running in this way,
           some will just not work properly at all, while others might
           decide to blow up power supplies with a huge load all at once,
           so use this option at your own risk.
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 23334c8bc4c7..d895a1adb428 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -16,7 +16,7 @@ config SPI
           controller and a chipselect.  Most SPI slaves don't support
           dynamic device discovery; some are even write-only or read-only.
 
-          SPI is widely used by microcontollers to talk with sensors,
+          SPI is widely used by microcontrollers to talk with sensors,
           eeprom and flash memory, codecs and various other controller
           chips, analog to digital (and d-to-a) converters, and more.
           MMC and SD cards can be accessed using SPI protocol; and for
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index cf10cbc98f80..cc60759083bf 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -153,7 +153,7 @@ config USB_U132_HCD
           adapter will *NOT* work with PC cards that do not contain an OHCI
           controller.
 
-          For those PC cards that contain multiple OHCI controllers only ther
+          For those PC cards that contain multiple OHCI controllers only the
           first one is used.
 
           The driver consists of two modules, the "ftdi-elan" module is a
diff --git a/fs/Kconfig b/fs/Kconfig
index 7b1511d50b05..8bec76bbc0c3 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1145,7 +1145,7 @@ config BEFS_FS
         help
           The BeOS File System (BeFS) is the native file system of Be, Inc's
           BeOS. Notable features include support for arbitrary attributes
-          on files and directories, and database-like indeces on selected
+          on files and directories, and database-like indices on selected
           attributes. (Also note that this driver doesn't make those features
           available at this time). It is a 64 bit filesystem, so it supports
           extremely large volumes and files.
diff --git a/sound/Kconfig b/sound/Kconfig
index e0d791a98452..95949b6806ac 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -64,11 +64,11 @@ source "sound/arm/Kconfig"
 
 source "sound/mips/Kconfig"
 
-# the following will depenend on the order of config.
+# the following will depend on the order of config.
 # here assuming USB is defined before ALSA
 source "sound/usb/Kconfig"
 
-# the following will depenend on the order of config.
+# the following will depend on the order of config.
 # here assuming PCMCIA is defined before ALSA
 source "sound/pcmcia/Kconfig"