aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAndrei Konovalov <akonovalov@ru.mvista.com>2005-07-05 21:54:43 -0400
committerLinus Torvalds <torvalds@g5.osdl.org>2005-07-05 22:18:59 -0400
commite6b6239f8e8e5bd9ba0192a854652abf14e28ce4 (patch)
tree8cb580d70757ee3ef3231be410ad35917f0fadb7
parent5432ebb5f67f0be3264feb646f6f8f6c326899c9 (diff)
[PATCH] ppc32: add Freescale MPC885ADS board support
This patch adds the Freescale MPC86xADS board support. The supported devices are SMC UART and 10Mbit ethernet on SCC1. The manual for the board says that it "is compatible with the MPC8xxFADS for software point of view". That's why this patch extends FADS instead of introducing a new platform. FEC is not supported as the "combined FCC/FEC ethernet driver" driver by Pantelis Antoniou should replace the current FEC driver. Signed-off-by: Gennadiy Kurtsman <gkurtsman@ru.mvista.com> Signed-off-by: Andrei Konovalov <akonovalov@ru.mvista.com> Acked-by: Tom Rini <trini@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat
-rw-r--r--arch/ppc/8xx_io/enet.c52
-rw-r--r--arch/ppc/Kconfig22
-rw-r--r--arch/ppc/configs/mpc86x_ads_defconfig633
-rw-r--r--arch/ppc/configs/mpc885ads_defconfig622
-rw-r--r--arch/ppc/platforms/fads.h109
-rw-r--r--arch/ppc/platforms/mpc885ads.h92
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm1.c32
-rw-r--r--include/asm-ppc/mpc8xx.h4
8 files changed, 1550 insertions, 16 deletions
diff --git a/arch/ppc/8xx_io/enet.c b/arch/ppc/8xx_io/enet.c
index 4ea7158e5062..ece6a9fbe09b 100644
--- a/arch/ppc/8xx_io/enet.c
+++ b/arch/ppc/8xx_io/enet.c
@@ -714,16 +714,24 @@ static int __init scc_enet_init(void)
714 immap->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */ 714 immap->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */
715#endif /* PC_ENET_LBK */ 715#endif /* PC_ENET_LBK */
716 716
717 /* Configure port C pins to enable CLSN and RENA. 717#ifdef PE_ENET_TCLK
718 /* Configure port E for TCLK and RCLK.
718 */ 719 */
719 immap->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA); 720 cp->cp_pepar |= (PE_ENET_TCLK | PE_ENET_RCLK);
720 immap->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA); 721 cp->cp_pedir &= ~(PE_ENET_TCLK | PE_ENET_RCLK);
721 immap->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA); 722 cp->cp_peso &= ~(PE_ENET_TCLK | PE_ENET_RCLK);
722 723#else
723 /* Configure port A for TCLK and RCLK. 724 /* Configure port A for TCLK and RCLK.
724 */ 725 */
725 immap->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK); 726 immap->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK);
726 immap->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK); 727 immap->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
728#endif
729
730 /* Configure port C pins to enable CLSN and RENA.
731 */
732 immap->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
733 immap->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
734 immap->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
727 735
728 /* Configure Serial Interface clock routing. 736 /* Configure Serial Interface clock routing.
729 * First, clear all SCC bits to zero, then set the ones we want. 737 * First, clear all SCC bits to zero, then set the ones we want.
@@ -896,14 +904,18 @@ static int __init scc_enet_init(void)
896 /* It is now OK to enable the Ethernet transmitter. 904 /* It is now OK to enable the Ethernet transmitter.
897 * Unfortunately, there are board implementation differences here. 905 * Unfortunately, there are board implementation differences here.
898 */ 906 */
899#if (!defined (PB_ENET_TENA) && defined (PC_ENET_TENA)) 907#if (!defined (PB_ENET_TENA) && defined (PC_ENET_TENA) && !defined (PE_ENET_TENA))
900 immap->im_ioport.iop_pcpar |= PC_ENET_TENA; 908 immap->im_ioport.iop_pcpar |= PC_ENET_TENA;
901 immap->im_ioport.iop_pcdir &= ~PC_ENET_TENA; 909 immap->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
902#elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA)) 910#elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && !defined (PE_ENET_TENA))
903 cp->cp_pbpar |= PB_ENET_TENA; 911 cp->cp_pbpar |= PB_ENET_TENA;
904 cp->cp_pbdir |= PB_ENET_TENA; 912 cp->cp_pbdir |= PB_ENET_TENA;
913#elif ( !defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && defined (PE_ENET_TENA))
914 cp->cp_pepar |= PE_ENET_TENA;
915 cp->cp_pedir &= ~PE_ENET_TENA;
916 cp->cp_peso |= PE_ENET_TENA;
905#else 917#else
906#error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA 918#error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA, PE_ENET_TENA
907#endif 919#endif
908 920
909#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) 921#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
@@ -936,6 +948,29 @@ static int __init scc_enet_init(void)
936 *((volatile uint *)BCSR1) &= ~BCSR1_ETHEN; 948 *((volatile uint *)BCSR1) &= ~BCSR1_ETHEN;
937#endif 949#endif
938 950
951#ifdef CONFIG_MPC885ADS
952
953 /* Deassert PHY reset and enable the PHY.
954 */
955 {
956 volatile uint __iomem *bcsr = ioremap(BCSR_ADDR, BCSR_SIZE);
957 uint tmp;
958
959 tmp = in_be32(bcsr + 1 /* BCSR1 */);
960 tmp |= BCSR1_ETHEN;
961 out_be32(bcsr + 1, tmp);
962 tmp = in_be32(bcsr + 4 /* BCSR4 */);
963 tmp |= BCSR4_ETH10_RST;
964 out_be32(bcsr + 4, tmp);
965 iounmap(bcsr);
966 }
967
968 /* On MPC885ADS SCC ethernet PHY defaults to the full duplex mode
969 * upon reset. SCC is set to half duplex by default. So this
970 * inconsistency should be better fixed by the software.
971 */
972#endif
973
939 dev->base_addr = (unsigned long)ep; 974 dev->base_addr = (unsigned long)ep;
940#if 0 975#if 0
941 dev->name = "CPM_ENET"; 976 dev->name = "CPM_ENET";
@@ -969,3 +1004,4 @@ static int __init scc_enet_init(void)
969} 1004}
970 1005
971module_init(scc_enet_init); 1006module_init(scc_enet_init);
1007
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index a7835cd3f51f..23b0d2f662c5 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -284,6 +284,9 @@ endmenu
284 284
285menu "Platform options" 285menu "Platform options"
286 286
287config FADS
288 bool
289
287choice 290choice
288 prompt "8xx Machine Type" 291 prompt "8xx Machine Type"
289 depends on 8xx 292 depends on 8xx
@@ -399,8 +402,25 @@ config BSEIP
399 26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video 402 26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video
400 controller, and two RS232 ports. 403 controller, and two RS232 ports.
401 404
402config FADS 405config MPC8XXFADS
403 bool "FADS" 406 bool "FADS"
407 select FADS
408
409config MPC86XADS
410 bool "MPC86XADS"
411 help
412 MPC86x Application Development System by Freescale Semiconductor.
413 The MPC86xADS is meant to serve as a platform for s/w and h/w
414 development around the MPC86X processor families.
415 select FADS
416
417config MPC885ADS
418 bool "MPC885ADS"
419 help
420 Freescale Semiconductor MPC885 Application Development System (ADS).
421 Also known as DUET.
422 The MPC885ADS is meant to serve as a platform for s/w and h/w
423 development around the MPC885 processor family.
404 424
405config TQM823L 425config TQM823L
406 bool "TQM823L" 426 bool "TQM823L"
diff --git a/arch/ppc/configs/mpc86x_ads_defconfig b/arch/ppc/configs/mpc86x_ads_defconfig
new file mode 100644
index 000000000000..f63c6f59d68a
--- /dev/null
+++ b/arch/ppc/configs/mpc86x_ads_defconfig
@@ -0,0 +1,633 @@
1#
2# Automatically generated make config: don't edit
3# Linux kernel version: 2.6.12-rc4
4# Tue Jun 14 13:36:35 2005
5#
6CONFIG_MMU=y
7CONFIG_GENERIC_HARDIRQS=y
8CONFIG_RWSEM_XCHGADD_ALGORITHM=y
9CONFIG_GENERIC_CALIBRATE_DELAY=y
10CONFIG_HAVE_DEC_LOCK=y
11CONFIG_PPC=y
12CONFIG_PPC32=y
13CONFIG_GENERIC_NVRAM=y
14CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
15
16#
17# Code maturity level options
18#
19CONFIG_EXPERIMENTAL=y
20# CONFIG_CLEAN_COMPILE is not set
21CONFIG_BROKEN=y
22CONFIG_BROKEN_ON_SMP=y
23CONFIG_INIT_ENV_ARG_LIMIT=32
24
25#
26# General setup
27#
28CONFIG_LOCALVERSION=""
29# CONFIG_SWAP is not set
30CONFIG_SYSVIPC=y
31# CONFIG_POSIX_MQUEUE is not set
32# CONFIG_BSD_PROCESS_ACCT is not set
33CONFIG_SYSCTL=y
34# CONFIG_AUDIT is not set
35# CONFIG_HOTPLUG is not set
36CONFIG_KOBJECT_UEVENT=y
37# CONFIG_IKCONFIG is not set
38CONFIG_EMBEDDED=y
39# CONFIG_KALLSYMS is not set
40CONFIG_PRINTK=y
41CONFIG_BUG=y
42# CONFIG_BASE_FULL is not set
43CONFIG_FUTEX=y
44# CONFIG_EPOLL is not set
45# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
46# CONFIG_SHMEM is not set
47CONFIG_CC_ALIGN_FUNCTIONS=0
48CONFIG_CC_ALIGN_LABELS=0
49CONFIG_CC_ALIGN_LOOPS=0
50CONFIG_CC_ALIGN_JUMPS=0
51CONFIG_TINY_SHMEM=y
52CONFIG_BASE_SMALL=1
53
54#
55# Loadable module support
56#
57CONFIG_MODULES=y
58# CONFIG_MODULE_UNLOAD is not set
59CONFIG_OBSOLETE_MODPARM=y
60# CONFIG_MODVERSIONS is not set
61# CONFIG_MODULE_SRCVERSION_ALL is not set
62# CONFIG_KMOD is not set
63
64#
65# Processor
66#
67# CONFIG_6xx is not set
68# CONFIG_40x is not set
69# CONFIG_44x is not set
70# CONFIG_POWER3 is not set
71# CONFIG_POWER4 is not set
72CONFIG_8xx=y
73# CONFIG_E500 is not set
74# CONFIG_MATH_EMULATION is not set
75# CONFIG_CPU_FREQ is not set
76CONFIG_EMBEDDEDBOOT=y
77# CONFIG_PM is not set
78CONFIG_NOT_COHERENT_CACHE=y
79
80#
81# Platform options
82#
83CONFIG_FADS=y
84# CONFIG_RPXLITE is not set
85# CONFIG_RPXCLASSIC is not set
86# CONFIG_BSEIP is not set
87# CONFIG_MPC8XXFADS is not set
88CONFIG_MPC86XADS=y
89# CONFIG_TQM823L is not set
90# CONFIG_TQM850L is not set
91# CONFIG_TQM855L is not set
92# CONFIG_TQM860L is not set
93# CONFIG_FPS850L is not set
94# CONFIG_SPD823TS is not set
95# CONFIG_IVMS8 is not set
96# CONFIG_IVML24 is not set
97# CONFIG_SM850 is not set
98# CONFIG_HERMES_PRO is not set
99# CONFIG_IP860 is not set
100# CONFIG_LWMON is not set
101# CONFIG_PCU_E is not set
102# CONFIG_CCM is not set
103# CONFIG_LANTEC is not set
104# CONFIG_MBX is not set
105# CONFIG_WINCEPT is not set
106# CONFIG_SMP is not set
107# CONFIG_PREEMPT is not set
108# CONFIG_HIGHMEM is not set
109CONFIG_BINFMT_ELF=y
110# CONFIG_BINFMT_MISC is not set
111# CONFIG_CMDLINE_BOOL is not set
112CONFIG_ISA_DMA_API=y
113
114#
115# Bus options
116#
117# CONFIG_PCI is not set
118# CONFIG_PCI_DOMAINS is not set
119# CONFIG_PCI_QSPAN is not set
120
121#
122# PCCARD (PCMCIA/CardBus) support
123#
124# CONFIG_PCCARD is not set
125
126#
127# Advanced setup
128#
129# CONFIG_ADVANCED_OPTIONS is not set
130
131#
132# Default settings for advanced configuration options are used
133#
134CONFIG_HIGHMEM_START=0xfe000000
135CONFIG_LOWMEM_SIZE=0x30000000
136CONFIG_KERNEL_START=0xc0000000
137CONFIG_TASK_SIZE=0x80000000
138CONFIG_CONSISTENT_START=0xff100000
139CONFIG_CONSISTENT_SIZE=0x00200000
140CONFIG_BOOT_LOAD=0x00400000
141
142#
143# Device Drivers
144#
145
146#
147# Generic Driver Options
148#
149# CONFIG_STANDALONE is not set
150CONFIG_PREVENT_FIRMWARE_BUILD=y
151# CONFIG_FW_LOADER is not set
152
153#
154# Memory Technology Devices (MTD)
155#
156# CONFIG_MTD is not set
157
158#
159# Parallel port support
160#
161# CONFIG_PARPORT is not set
162
163#
164# Plug and Play support
165#
166
167#
168# Block devices
169#
170# CONFIG_BLK_DEV_FD is not set
171# CONFIG_BLK_DEV_COW_COMMON is not set
172CONFIG_BLK_DEV_LOOP=y
173# CONFIG_BLK_DEV_CRYPTOLOOP is not set
174# CONFIG_BLK_DEV_NBD is not set
175# CONFIG_BLK_DEV_RAM is not set
176CONFIG_BLK_DEV_RAM_COUNT=16
177CONFIG_INITRAMFS_SOURCE=""
178# CONFIG_LBD is not set
179# CONFIG_CDROM_PKTCDVD is not set
180
181#
182# IO Schedulers
183#
184CONFIG_IOSCHED_NOOP=y
185CONFIG_IOSCHED_AS=y
186CONFIG_IOSCHED_DEADLINE=y
187CONFIG_IOSCHED_CFQ=y
188# CONFIG_ATA_OVER_ETH is not set
189
190#
191# ATA/ATAPI/MFM/RLL support
192#
193# CONFIG_IDE is not set
194
195#
196# SCSI device support
197#
198# CONFIG_SCSI is not set
199
200#
201# Multi-device support (RAID and LVM)
202#
203# CONFIG_MD is not set
204
205#
206# Fusion MPT device support
207#
208
209#
210# IEEE 1394 (FireWire) support
211#
212# CONFIG_IEEE1394 is not set
213
214#
215# I2O device support
216#
217
218#
219# Macintosh device drivers
220#
221
222#
223# Networking support
224#
225CONFIG_NET=y
226
227#
228# Networking options
229#
230CONFIG_PACKET=y
231# CONFIG_PACKET_MMAP is not set
232CONFIG_UNIX=y
233# CONFIG_NET_KEY is not set
234CONFIG_INET=y
235# CONFIG_IP_MULTICAST is not set
236# CONFIG_IP_ADVANCED_ROUTER is not set
237CONFIG_IP_PNP=y
238CONFIG_IP_PNP_DHCP=y
239# CONFIG_IP_PNP_BOOTP is not set
240# CONFIG_IP_PNP_RARP is not set
241# CONFIG_NET_IPIP is not set
242# CONFIG_NET_IPGRE is not set
243# CONFIG_ARPD is not set
244# CONFIG_SYN_COOKIES is not set
245# CONFIG_INET_AH is not set
246# CONFIG_INET_ESP is not set
247# CONFIG_INET_IPCOMP is not set
248# CONFIG_INET_TUNNEL is not set
249CONFIG_IP_TCPDIAG=y
250# CONFIG_IP_TCPDIAG_IPV6 is not set
251CONFIG_IPV6=m
252# CONFIG_IPV6_PRIVACY is not set
253# CONFIG_INET6_AH is not set
254# CONFIG_INET6_ESP is not set
255# CONFIG_INET6_IPCOMP is not set
256# CONFIG_INET6_TUNNEL is not set
257# CONFIG_IPV6_TUNNEL is not set
258# CONFIG_NETFILTER is not set
259
260#
261# SCTP Configuration (EXPERIMENTAL)
262#
263# CONFIG_IP_SCTP is not set
264# CONFIG_ATM is not set
265# CONFIG_BRIDGE is not set
266# CONFIG_VLAN_8021Q is not set
267# CONFIG_DECNET is not set
268# CONFIG_LLC2 is not set
269# CONFIG_IPX is not set
270# CONFIG_ATALK is not set
271# CONFIG_X25 is not set
272# CONFIG_LAPB is not set
273# CONFIG_NET_DIVERT is not set
274# CONFIG_ECONET is not set
275# CONFIG_WAN_ROUTER is not set
276
277#
278# QoS and/or fair queueing
279#
280# CONFIG_NET_SCHED is not set
281# CONFIG_NET_CLS_ROUTE is not set
282
283#
284# Network testing
285#
286# CONFIG_NET_PKTGEN is not set
287# CONFIG_NETPOLL is not set
288# CONFIG_NET_POLL_CONTROLLER is not set
289# CONFIG_HAMRADIO is not set
290# CONFIG_IRDA is not set
291# CONFIG_BT is not set
292CONFIG_NETDEVICES=y
293# CONFIG_DUMMY is not set
294# CONFIG_BONDING is not set
295# CONFIG_EQUALIZER is not set
296# CONFIG_TUN is not set
297
298#
299# Ethernet (10 or 100Mbit)
300#
301CONFIG_NET_ETHERNET=y
302# CONFIG_MII is not set
303# CONFIG_OAKNET is not set
304
305#
306# Ethernet (1000 Mbit)
307#
308
309#
310# Ethernet (10000 Mbit)
311#
312
313#
314# Token Ring devices
315#
316
317#
318# Wireless LAN (non-hamradio)
319#
320# CONFIG_NET_RADIO is not set
321
322#
323# Wan interfaces
324#
325# CONFIG_WAN is not set
326# CONFIG_PPP is not set
327# CONFIG_SLIP is not set
328# CONFIG_SHAPER is not set
329# CONFIG_NETCONSOLE is not set
330
331#
332# ISDN subsystem
333#
334# CONFIG_ISDN is not set
335
336#
337# Telephony Support
338#
339# CONFIG_PHONE is not set
340
341#
342# Input device support
343#
344# CONFIG_INPUT is not set
345
346#
347# Hardware I/O ports
348#
349# CONFIG_SERIO is not set
350# CONFIG_GAMEPORT is not set
351CONFIG_SOUND_GAMEPORT=y
352
353#
354# Character devices
355#
356# CONFIG_VT is not set
357# CONFIG_SERIAL_NONSTANDARD is not set
358
359#
360# Serial drivers
361#
362# CONFIG_SERIAL_8250 is not set
363
364#
365# Non-8250 serial port support
366#
367CONFIG_SERIAL_CORE=y
368CONFIG_SERIAL_CORE_CONSOLE=y
369CONFIG_SERIAL_CPM=y
370CONFIG_SERIAL_CPM_CONSOLE=y
371# CONFIG_SERIAL_CPM_SCC1 is not set
372# CONFIG_SERIAL_CPM_SCC2 is not set
373# CONFIG_SERIAL_CPM_SCC3 is not set
374# CONFIG_SERIAL_CPM_SCC4 is not set
375CONFIG_SERIAL_CPM_SMC1=y
376# CONFIG_SERIAL_CPM_SMC2 is not set
377CONFIG_UNIX98_PTYS=y
378# CONFIG_LEGACY_PTYS is not set
379
380#
381# IPMI
382#
383# CONFIG_IPMI_HANDLER is not set
384
385#
386# Watchdog Cards
387#
388# CONFIG_WATCHDOG is not set
389# CONFIG_NVRAM is not set
390# CONFIG_GEN_RTC is not set
391# CONFIG_DTLK is not set
392# CONFIG_R3964 is not set
393
394#
395# Ftape, the floppy tape device driver
396#
397# CONFIG_AGP is not set
398# CONFIG_DRM is not set
399# CONFIG_RAW_DRIVER is not set
400
401#
402# TPM devices
403#
404
405#
406# I2C support
407#
408# CONFIG_I2C is not set
409
410#
411# Dallas's 1-wire bus
412#
413# CONFIG_W1 is not set
414
415#
416# Misc devices
417#
418
419#
420# Multimedia devices
421#
422# CONFIG_VIDEO_DEV is not set
423
424#
425# Digital Video Broadcasting Devices
426#
427# CONFIG_DVB is not set
428
429#
430# Graphics support
431#
432# CONFIG_FB is not set
433
434#
435# Sound
436#
437# CONFIG_SOUND is not set
438
439#
440# USB support
441#
442# CONFIG_USB_ARCH_HAS_HCD is not set
443# CONFIG_USB_ARCH_HAS_OHCI is not set
444
445#
446# USB Gadget Support
447#
448# CONFIG_USB_GADGET is not set
449
450#
451# MMC/SD Card support
452#
453# CONFIG_MMC is not set
454
455#
456# InfiniBand support
457#
458# CONFIG_INFINIBAND is not set
459
460#
461# File systems
462#
463# CONFIG_EXT2_FS is not set
464CONFIG_EXT3_FS=y
465# CONFIG_EXT3_FS_XATTR is not set
466CONFIG_JBD=y
467# CONFIG_JBD_DEBUG is not set
468# CONFIG_REISERFS_FS is not set
469# CONFIG_JFS_FS is not set
470
471#
472# XFS support
473#
474# CONFIG_XFS_FS is not set
475# CONFIG_MINIX_FS is not set
476# CONFIG_ROMFS_FS is not set
477# CONFIG_QUOTA is not set
478# CONFIG_DNOTIFY is not set
479# CONFIG_AUTOFS_FS is not set
480# CONFIG_AUTOFS4_FS is not set
481
482#
483# CD-ROM/DVD Filesystems
484#
485# CONFIG_ISO9660_FS is not set
486# CONFIG_UDF_FS is not set
487
488#
489# DOS/FAT/NT Filesystems
490#
491# CONFIG_MSDOS_FS is not set
492# CONFIG_VFAT_FS is not set
493# CONFIG_NTFS_FS is not set
494
495#
496# Pseudo filesystems
497#
498CONFIG_PROC_FS=y
499CONFIG_PROC_KCORE=y
500CONFIG_SYSFS=y
501# CONFIG_DEVFS_FS is not set
502# CONFIG_DEVPTS_FS_XATTR is not set
503# CONFIG_TMPFS is not set
504# CONFIG_HUGETLBFS is not set
505# CONFIG_HUGETLB_PAGE is not set
506CONFIG_RAMFS=y
507
508#
509# Miscellaneous filesystems
510#
511# CONFIG_ADFS_FS is not set
512# CONFIG_AFFS_FS is not set
513# CONFIG_HFS_FS is not set
514# CONFIG_HFSPLUS_FS is not set
515# CONFIG_BEFS_FS is not set
516# CONFIG_BFS_FS is not set
517# CONFIG_EFS_FS is not set
518# CONFIG_CRAMFS is not set
519# CONFIG_VXFS_FS is not set
520# CONFIG_HPFS_FS is not set
521# CONFIG_QNX4FS_FS is not set
522# CONFIG_SYSV_FS is not set
523# CONFIG_UFS_FS is not set
524
525#
526# Network File Systems
527#
528CONFIG_NFS_FS=y
529CONFIG_NFS_V3=y
530CONFIG_NFS_V4=y
531# CONFIG_NFS_DIRECTIO is not set
532# CONFIG_NFSD is not set
533CONFIG_ROOT_NFS=y
534CONFIG_LOCKD=y
535CONFIG_LOCKD_V4=y
536CONFIG_SUNRPC=y
537CONFIG_SUNRPC_GSS=y
538CONFIG_RPCSEC_GSS_KRB5=y
539# CONFIG_RPCSEC_GSS_SPKM3 is not set
540# CONFIG_SMB_FS is not set
541# CONFIG_CIFS is not set
542# CONFIG_NCP_FS is not set
543# CONFIG_CODA_FS is not set
544# CONFIG_AFS_FS is not set
545
546#
547# Partition Types
548#
549# CONFIG_PARTITION_ADVANCED is not set
550CONFIG_MSDOS_PARTITION=y
551
552#
553# Native Language Support
554#
555# CONFIG_NLS is not set
556
557#
558# MPC8xx CPM Options
559#
560CONFIG_SCC_ENET=y
561CONFIG_SCC1_ENET=y
562# CONFIG_SCC2_ENET is not set
563# CONFIG_SCC3_ENET is not set
564# CONFIG_FEC_ENET is not set
565# CONFIG_ENET_BIG_BUFFERS is not set
566
567#
568# Generic MPC8xx Options
569#
570# CONFIG_8xx_COPYBACK is not set
571# CONFIG_8xx_CPU6 is not set
572CONFIG_NO_UCODE_PATCH=y
573# CONFIG_USB_SOF_UCODE_PATCH is not set
574# CONFIG_I2C_SPI_UCODE_PATCH is not set
575# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
576
577#
578# Library routines
579#
580# CONFIG_CRC_CCITT is not set
581# CONFIG_CRC32 is not set
582# CONFIG_LIBCRC32C is not set
583
584#
585# Profiling support
586#
587# CONFIG_PROFILING is not set
588
589#
590# Kernel hacking
591#
592# CONFIG_PRINTK_TIME is not set
593# CONFIG_DEBUG_KERNEL is not set
594CONFIG_LOG_BUF_SHIFT=14
595
596#
597# Security options
598#
599# CONFIG_KEYS is not set
600# CONFIG_SECURITY is not set
601
602#
603# Cryptographic options
604#
605CONFIG_CRYPTO=y
606# CONFIG_CRYPTO_HMAC is not set
607# CONFIG_CRYPTO_NULL is not set
608# CONFIG_CRYPTO_MD4 is not set
609CONFIG_CRYPTO_MD5=y
610# CONFIG_CRYPTO_SHA1 is not set
611# CONFIG_CRYPTO_SHA256 is not set
612# CONFIG_CRYPTO_SHA512 is not set
613# CONFIG_CRYPTO_WP512 is not set
614# CONFIG_CRYPTO_TGR192 is not set
615CONFIG_CRYPTO_DES=y
616# CONFIG_CRYPTO_BLOWFISH is not set
617# CONFIG_CRYPTO_TWOFISH is not set
618# CONFIG_CRYPTO_SERPENT is not set
619# CONFIG_CRYPTO_AES is not set
620# CONFIG_CRYPTO_CAST5 is not set
621# CONFIG_CRYPTO_CAST6 is not set
622# CONFIG_CRYPTO_TEA is not set
623# CONFIG_CRYPTO_ARC4 is not set
624# CONFIG_CRYPTO_KHAZAD is not set
625# CONFIG_CRYPTO_ANUBIS is not set
626# CONFIG_CRYPTO_DEFLATE is not set
627# CONFIG_CRYPTO_MICHAEL_MIC is not set
628# CONFIG_CRYPTO_CRC32C is not set
629# CONFIG_CRYPTO_TEST is not set
630
631#
632# Hardware crypto devices
633#
diff --git a/arch/ppc/configs/mpc885ads_defconfig b/arch/ppc/configs/mpc885ads_defconfig
new file mode 100644
index 000000000000..016f94d9325f
--- /dev/null
+++ b/arch/ppc/configs/mpc885ads_defconfig
@@ -0,0 +1,622 @@
1#
2# Automatically generated make config: don't edit
3# Linux kernel version: 2.6.12-rc6
4# Thu Jun 9 21:17:29 2005
5#
6CONFIG_MMU=y
7CONFIG_GENERIC_HARDIRQS=y
8CONFIG_RWSEM_XCHGADD_ALGORITHM=y
9CONFIG_GENERIC_CALIBRATE_DELAY=y
10CONFIG_HAVE_DEC_LOCK=y
11CONFIG_PPC=y
12CONFIG_PPC32=y
13CONFIG_GENERIC_NVRAM=y
14CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
15
16#
17# Code maturity level options
18#
19CONFIG_EXPERIMENTAL=y
20# CONFIG_CLEAN_COMPILE is not set
21CONFIG_BROKEN=y
22CONFIG_BROKEN_ON_SMP=y
23CONFIG_INIT_ENV_ARG_LIMIT=32
24
25#
26# General setup
27#
28CONFIG_LOCALVERSION=""
29# CONFIG_SWAP is not set
30CONFIG_SYSVIPC=y
31# CONFIG_POSIX_MQUEUE is not set
32# CONFIG_BSD_PROCESS_ACCT is not set
33CONFIG_SYSCTL=y
34# CONFIG_AUDIT is not set
35CONFIG_HOTPLUG=y
36CONFIG_KOBJECT_UEVENT=y
37# CONFIG_IKCONFIG is not set
38CONFIG_EMBEDDED=y
39# CONFIG_KALLSYMS is not set
40CONFIG_PRINTK=y
41CONFIG_BUG=y
42CONFIG_BASE_FULL=y
43CONFIG_FUTEX=y
44# CONFIG_EPOLL is not set
45# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
46CONFIG_SHMEM=y
47CONFIG_CC_ALIGN_FUNCTIONS=0
48CONFIG_CC_ALIGN_LABELS=0
49CONFIG_CC_ALIGN_LOOPS=0
50CONFIG_CC_ALIGN_JUMPS=0
51# CONFIG_TINY_SHMEM is not set
52CONFIG_BASE_SMALL=0
53
54#
55# Loadable module support
56#
57# CONFIG_MODULES is not set
58
59#
60# Processor
61#
62# CONFIG_6xx is not set
63# CONFIG_40x is not set
64# CONFIG_44x is not set
65# CONFIG_POWER3 is not set
66# CONFIG_POWER4 is not set
67CONFIG_8xx=y
68# CONFIG_E500 is not set
69# CONFIG_MATH_EMULATION is not set
70# CONFIG_CPU_FREQ is not set
71CONFIG_EMBEDDEDBOOT=y
72# CONFIG_PM is not set
73CONFIG_NOT_COHERENT_CACHE=y
74
75#
76# Platform options
77#
78# CONFIG_RPXLITE is not set
79# CONFIG_RPXCLASSIC is not set
80# CONFIG_BSEIP is not set
81# CONFIG_FADS is not set
82CONFIG_MPC885ADS=y
83# CONFIG_TQM823L is not set
84# CONFIG_TQM850L is not set
85# CONFIG_TQM855L is not set
86# CONFIG_TQM860L is not set
87# CONFIG_FPS850L is not set
88# CONFIG_SPD823TS is not set
89# CONFIG_IVMS8 is not set
90# CONFIG_IVML24 is not set
91# CONFIG_SM850 is not set
92# CONFIG_HERMES_PRO is not set
93# CONFIG_IP860 is not set
94# CONFIG_LWMON is not set
95# CONFIG_PCU_E is not set
96# CONFIG_CCM is not set
97# CONFIG_LANTEC is not set
98# CONFIG_MBX is not set
99# CONFIG_WINCEPT is not set
100# CONFIG_SMP is not set
101# CONFIG_PREEMPT is not set
102# CONFIG_HIGHMEM is not set
103CONFIG_BINFMT_ELF=y
104# CONFIG_BINFMT_MISC is not set
105# CONFIG_CMDLINE_BOOL is not set
106CONFIG_ISA_DMA_API=y
107
108#
109# Bus options
110#
111# CONFIG_PCI is not set
112# CONFIG_PCI_DOMAINS is not set
113# CONFIG_PCI_QSPAN is not set
114
115#
116# PCCARD (PCMCIA/CardBus) support
117#
118# CONFIG_PCCARD is not set
119
120#
121# Advanced setup
122#
123# CONFIG_ADVANCED_OPTIONS is not set
124
125#
126# Default settings for advanced configuration options are used
127#
128CONFIG_HIGHMEM_START=0xfe000000
129CONFIG_LOWMEM_SIZE=0x30000000
130CONFIG_KERNEL_START=0xc0000000
131CONFIG_TASK_SIZE=0x80000000
132CONFIG_CONSISTENT_START=0xff100000
133CONFIG_CONSISTENT_SIZE=0x00200000
134CONFIG_BOOT_LOAD=0x00400000
135
136#
137# Device Drivers
138#
139
140#
141# Generic Driver Options
142#
143CONFIG_STANDALONE=y
144CONFIG_PREVENT_FIRMWARE_BUILD=y
145# CONFIG_FW_LOADER is not set
146
147#
148# Memory Technology Devices (MTD)
149#
150# CONFIG_MTD is not set
151
152#
153# Parallel port support
154#
155# CONFIG_PARPORT is not set
156
157#
158# Plug and Play support
159#
160
161#
162# Block devices
163#
164# CONFIG_BLK_DEV_FD is not set
165# CONFIG_BLK_DEV_COW_COMMON is not set
166# CONFIG_BLK_DEV_LOOP is not set
167# CONFIG_BLK_DEV_NBD is not set
168# CONFIG_BLK_DEV_RAM is not set
169CONFIG_BLK_DEV_RAM_COUNT=16
170CONFIG_INITRAMFS_SOURCE=""
171# CONFIG_LBD is not set
172# CONFIG_CDROM_PKTCDVD is not set
173
174#
175# IO Schedulers
176#
177CONFIG_IOSCHED_NOOP=y
178# CONFIG_IOSCHED_AS is not set
179# CONFIG_IOSCHED_DEADLINE is not set
180# CONFIG_IOSCHED_CFQ is not set
181# CONFIG_ATA_OVER_ETH is not set
182
183#
184# ATA/ATAPI/MFM/RLL support
185#
186# CONFIG_IDE is not set
187
188#
189# SCSI device support
190#
191# CONFIG_SCSI is not set
192
193#
194# Multi-device support (RAID and LVM)
195#
196# CONFIG_MD is not set
197
198#
199# Fusion MPT device support
200#
201
202#
203# IEEE 1394 (FireWire) support
204#
205# CONFIG_IEEE1394 is not set
206
207#
208# I2O device support
209#
210
211#
212# Macintosh device drivers
213#
214
215#
216# Networking support
217#
218CONFIG_NET=y
219
220#
221# Networking options
222#
223CONFIG_PACKET=y
224# CONFIG_PACKET_MMAP is not set
225CONFIG_UNIX=y
226# CONFIG_NET_KEY is not set
227CONFIG_INET=y
228# CONFIG_IP_MULTICAST is not set
229# CONFIG_IP_ADVANCED_ROUTER is not set
230CONFIG_IP_PNP=y
231CONFIG_IP_PNP_DHCP=y
232CONFIG_IP_PNP_BOOTP=y
233# CONFIG_IP_PNP_RARP is not set
234# CONFIG_NET_IPIP is not set
235# CONFIG_NET_IPGRE is not set
236# CONFIG_ARPD is not set
237# CONFIG_SYN_COOKIES is not set
238# CONFIG_INET_AH is not set
239# CONFIG_INET_ESP is not set
240# CONFIG_INET_IPCOMP is not set
241# CONFIG_INET_TUNNEL is not set
242CONFIG_IP_TCPDIAG=y
243# CONFIG_IP_TCPDIAG_IPV6 is not set
244# CONFIG_IPV6 is not set
245# CONFIG_NETFILTER is not set
246
247#
248# SCTP Configuration (EXPERIMENTAL)
249#
250# CONFIG_IP_SCTP is not set
251# CONFIG_ATM is not set
252# CONFIG_BRIDGE is not set
253# CONFIG_VLAN_8021Q is not set
254# CONFIG_DECNET is not set
255# CONFIG_LLC2 is not set
256# CONFIG_IPX is not set
257# CONFIG_ATALK is not set
258# CONFIG_X25 is not set
259# CONFIG_LAPB is not set
260# CONFIG_NET_DIVERT is not set
261# CONFIG_ECONET is not set
262# CONFIG_WAN_ROUTER is not set
263
264#
265# QoS and/or fair queueing
266#
267# CONFIG_NET_SCHED is not set
268# CONFIG_NET_CLS_ROUTE is not set
269
270#
271# Network testing
272#
273# CONFIG_NET_PKTGEN is not set
274# CONFIG_NETPOLL is not set
275# CONFIG_NET_POLL_CONTROLLER is not set
276# CONFIG_HAMRADIO is not set
277# CONFIG_IRDA is not set
278# CONFIG_BT is not set
279CONFIG_NETDEVICES=y
280# CONFIG_DUMMY is not set
281# CONFIG_BONDING is not set
282# CONFIG_EQUALIZER is not set
283# CONFIG_TUN is not set
284
285#
286# Ethernet (10 or 100Mbit)
287#
288CONFIG_NET_ETHERNET=y
289CONFIG_MII=y
290# CONFIG_OAKNET is not set
291
292#
293# Ethernet (1000 Mbit)
294#
295
296#
297# Ethernet (10000 Mbit)
298#
299
300#
301# Token Ring devices
302#
303
304#
305# Wireless LAN (non-hamradio)
306#
307# CONFIG_NET_RADIO is not set
308
309#
310# Wan interfaces
311#
312# CONFIG_WAN is not set
313CONFIG_PPP=y
314# CONFIG_PPP_MULTILINK is not set
315# CONFIG_PPP_FILTER is not set
316CONFIG_PPP_ASYNC=y
317CONFIG_PPP_SYNC_TTY=y
318CONFIG_PPP_DEFLATE=y
319# CONFIG_PPP_BSDCOMP is not set
320# CONFIG_PPPOE is not set
321# CONFIG_SLIP is not set
322# CONFIG_SHAPER is not set
323# CONFIG_NETCONSOLE is not set
324
325#
326# ISDN subsystem
327#
328# CONFIG_ISDN is not set
329
330#
331# Telephony Support
332#
333# CONFIG_PHONE is not set
334
335#
336# Input device support
337#
338# CONFIG_INPUT is not set
339
340#
341# Hardware I/O ports
342#
343# CONFIG_SERIO is not set
344# CONFIG_GAMEPORT is not set
345
346#
347# Character devices
348#
349# CONFIG_VT is not set
350# CONFIG_SERIAL_NONSTANDARD is not set
351
352#
353# Serial drivers
354#
355# CONFIG_SERIAL_8250 is not set
356
357#
358# Non-8250 serial port support
359#
360CONFIG_SERIAL_CORE=y
361CONFIG_SERIAL_CORE_CONSOLE=y
362CONFIG_SERIAL_CPM=y
363CONFIG_SERIAL_CPM_CONSOLE=y
364# CONFIG_SERIAL_CPM_SCC1 is not set
365# CONFIG_SERIAL_CPM_SCC2 is not set
366# CONFIG_SERIAL_CPM_SCC3 is not set
367# CONFIG_SERIAL_CPM_SCC4 is not set
368CONFIG_SERIAL_CPM_SMC1=y
369CONFIG_SERIAL_CPM_SMC2=y
370CONFIG_UNIX98_PTYS=y
371# CONFIG_LEGACY_PTYS is not set
372
373#
374# IPMI
375#
376# CONFIG_IPMI_HANDLER is not set
377
378#
379# Watchdog Cards
380#
381# CONFIG_WATCHDOG is not set
382# CONFIG_NVRAM is not set
383# CONFIG_GEN_RTC is not set
384# CONFIG_DTLK is not set
385# CONFIG_R3964 is not set
386
387#
388# Ftape, the floppy tape device driver
389#
390# CONFIG_AGP is not set
391# CONFIG_DRM is not set
392# CONFIG_RAW_DRIVER is not set
393
394#
395# TPM devices
396#
397
398#
399# I2C support
400#
401# CONFIG_I2C is not set
402
403#
404# Dallas's 1-wire bus
405#
406# CONFIG_W1 is not set
407
408#
409# Misc devices
410#
411
412#
413# Multimedia devices
414#
415# CONFIG_VIDEO_DEV is not set
416
417#
418# Digital Video Broadcasting Devices
419#
420# CONFIG_DVB is not set
421
422#
423# Graphics support
424#
425# CONFIG_FB is not set
426
427#
428# Sound
429#
430# CONFIG_SOUND is not set
431
432#
433# USB support
434#
435# CONFIG_USB_ARCH_HAS_HCD is not set
436# CONFIG_USB_ARCH_HAS_OHCI is not set
437
438#
439# USB Gadget Support
440#
441# CONFIG_USB_GADGET is not set
442
443#
444# MMC/SD Card support
445#
446# CONFIG_MMC is not set
447
448#
449# InfiniBand support
450#
451# CONFIG_INFINIBAND is not set
452
453#
454# File systems
455#
456CONFIG_EXT2_FS=y
457CONFIG_EXT2_FS_XATTR=y
458# CONFIG_EXT2_FS_POSIX_ACL is not set
459# CONFIG_EXT2_FS_SECURITY is not set
460CONFIG_EXT3_FS=y
461CONFIG_EXT3_FS_XATTR=y
462# CONFIG_EXT3_FS_POSIX_ACL is not set
463# CONFIG_EXT3_FS_SECURITY is not set
464CONFIG_JBD=y
465# CONFIG_JBD_DEBUG is not set
466CONFIG_FS_MBCACHE=y
467# CONFIG_REISERFS_FS is not set
468# CONFIG_JFS_FS is not set
469
470#
471# XFS support
472#
473# CONFIG_XFS_FS is not set
474# CONFIG_MINIX_FS is not set
475# CONFIG_ROMFS_FS is not set
476# CONFIG_QUOTA is not set
477# CONFIG_DNOTIFY is not set
478# CONFIG_AUTOFS_FS is not set
479# CONFIG_AUTOFS4_FS is not set
480
481#
482# CD-ROM/DVD Filesystems
483#
484# CONFIG_ISO9660_FS is not set
485# CONFIG_UDF_FS is not set
486
487#
488# DOS/FAT/NT Filesystems
489#
490# CONFIG_MSDOS_FS is not set
491# CONFIG_VFAT_FS is not set
492# CONFIG_NTFS_FS is not set
493
494#
495# Pseudo filesystems
496#
497CONFIG_PROC_FS=y
498# CONFIG_PROC_KCORE is not set
499CONFIG_SYSFS=y
500# CONFIG_DEVFS_FS is not set
501# CONFIG_DEVPTS_FS_XATTR is not set
502# CONFIG_TMPFS is not set
503# CONFIG_HUGETLBFS is not set
504# CONFIG_HUGETLB_PAGE is not set
505CONFIG_RAMFS=y
506
507#
508# Miscellaneous filesystems
509#
510# CONFIG_ADFS_FS is not set
511# CONFIG_AFFS_FS is not set
512# CONFIG_HFS_FS is not set
513# CONFIG_HFSPLUS_FS is not set
514# CONFIG_BEFS_FS is not set
515# CONFIG_BFS_FS is not set
516# CONFIG_EFS_FS is not set
517# CONFIG_CRAMFS is not set
518# CONFIG_VXFS_FS is not set
519# CONFIG_HPFS_FS is not set
520# CONFIG_QNX4FS_FS is not set
521# CONFIG_SYSV_FS is not set
522# CONFIG_UFS_FS is not set
523
524#
525# Network File Systems
526#
527CONFIG_NFS_FS=y
528# CONFIG_NFS_V3 is not set
529# CONFIG_NFS_V4 is not set
530# CONFIG_NFS_DIRECTIO is not set
531# CONFIG_NFSD is not set
532CONFIG_ROOT_NFS=y
533CONFIG_LOCKD=y
534CONFIG_SUNRPC=y
535# CONFIG_RPCSEC_GSS_KRB5 is not set
536# CONFIG_RPCSEC_GSS_SPKM3 is not set
537# CONFIG_SMB_FS is not set
538# CONFIG_CIFS is not set
539# CONFIG_NCP_FS is not set
540# CONFIG_CODA_FS is not set
541# CONFIG_AFS_FS is not set
542
543#
544# Partition Types
545#
546CONFIG_PARTITION_ADVANCED=y
547# CONFIG_ACORN_PARTITION is not set
548# CONFIG_OSF_PARTITION is not set
549# CONFIG_AMIGA_PARTITION is not set
550# CONFIG_ATARI_PARTITION is not set
551# CONFIG_MAC_PARTITION is not set
552CONFIG_MSDOS_PARTITION=y
553# CONFIG_BSD_DISKLABEL is not set
554# CONFIG_MINIX_SUBPARTITION is not set
555# CONFIG_SOLARIS_X86_PARTITION is not set
556# CONFIG_UNIXWARE_DISKLABEL is not set
557# CONFIG_LDM_PARTITION is not set
558# CONFIG_SGI_PARTITION is not set
559# CONFIG_ULTRIX_PARTITION is not set
560# CONFIG_SUN_PARTITION is not set
561# CONFIG_EFI_PARTITION is not set
562
563#
564# Native Language Support
565#
566# CONFIG_NLS is not set
567
568#
569# MPC8xx CPM Options
570#
571CONFIG_SCC_ENET=y
572# CONFIG_SCC1_ENET is not set
573# CONFIG_SCC2_ENET is not set
574CONFIG_SCC3_ENET=y
575# CONFIG_FEC_ENET is not set
576# CONFIG_ENET_BIG_BUFFERS is not set
577
578#
579# Generic MPC8xx Options
580#
581CONFIG_8xx_COPYBACK=y
582CONFIG_8xx_CPU6=y
583CONFIG_NO_UCODE_PATCH=y
584# CONFIG_USB_SOF_UCODE_PATCH is not set
585# CONFIG_I2C_SPI_UCODE_PATCH is not set
586# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
587
588#
589# Library routines
590#
591CONFIG_CRC_CCITT=y
592# CONFIG_CRC32 is not set
593# CONFIG_LIBCRC32C is not set
594CONFIG_ZLIB_INFLATE=y
595CONFIG_ZLIB_DEFLATE=y
596
597#
598# Profiling support
599#
600# CONFIG_PROFILING is not set
601
602#
603# Kernel hacking
604#
605# CONFIG_PRINTK_TIME is not set
606# CONFIG_DEBUG_KERNEL is not set
607CONFIG_LOG_BUF_SHIFT=14
608
609#
610# Security options
611#
612# CONFIG_KEYS is not set
613# CONFIG_SECURITY is not set
614
615#
616# Cryptographic options
617#
618# CONFIG_CRYPTO is not set
619
620#
621# Hardware crypto devices
622#
diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h
index 632b8178ce66..b60c56450b67 100644
--- a/arch/ppc/platforms/fads.h
+++ b/arch/ppc/platforms/fads.h
@@ -3,7 +3,18 @@
3 * the Motorola 860T FADS board. Copied from the MBX stuff. 3 * the Motorola 860T FADS board. Copied from the MBX stuff.
4 * 4 *
5 * Copyright (c) 1998 Dan Malek (dmalek@jlc.net) 5 * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
6 *
7 * Added MPC86XADS support.
8 * The MPC86xADS manual says the board "is compatible with the MPC8xxFADS
9 * for SW point of view". This is 99% correct.
10 *
11 * Author: MontaVista Software, Inc.
12 * source@mvista.com
13 * 2005 (c) MontaVista Software, Inc. This file is licensed under the
14 * terms of the GNU General Public License version 2. This program is licensed
15 * "as is" without any warranty of any kind, whether express or implied.
6 */ 16 */
17
7#ifdef __KERNEL__ 18#ifdef __KERNEL__
8#ifndef __ASM_FADS_H__ 19#ifndef __ASM_FADS_H__
9#define __ASM_FADS_H__ 20#define __ASM_FADS_H__
@@ -12,18 +23,45 @@
12 23
13#include <asm/ppcboot.h> 24#include <asm/ppcboot.h>
14 25
26#if defined(CONFIG_MPC86XADS)
27
28/* U-Boot maps BCSR to 0xff080000 */
29#define BCSR_ADDR ((uint)0xff080000)
30
31/* MPC86XADS has one more CPLD and an additional BCSR.
32 */
33#define CFG_PHYDEV_ADDR ((uint)0xff0a0000)
34#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300))
35
36#define BCSR5_T1_RST 0x10
37#define BCSR5_ATM155_RST 0x08
38#define BCSR5_ATM25_RST 0x04
39#define BCSR5_MII1_EN 0x02
40#define BCSR5_MII1_RST 0x01
41
42/* There is no PHY link change interrupt */
43#define PHY_INTERRUPT (-1)
44
45#else /* FADS */
46
15/* Memory map is configured by the PROM startup. 47/* Memory map is configured by the PROM startup.
16 * I tried to follow the FADS manual, although the startup PROM 48 * I tried to follow the FADS manual, although the startup PROM
17 * dictates this and we simply have to move some of the physical 49 * dictates this and we simply have to move some of the physical
18 * addresses for Linux. 50 * addresses for Linux.
19 */ 51 */
20#define BCSR_ADDR ((uint)0xff010000) 52#define BCSR_ADDR ((uint)0xff010000)
53
54/* PHY link change interrupt */
55#define PHY_INTERRUPT SIU_IRQ2
56
57#endif /* CONFIG_MPC86XADS */
58
21#define BCSR_SIZE ((uint)(64 * 1024)) 59#define BCSR_SIZE ((uint)(64 * 1024))
22#define BCSR0 ((uint)0xff010000) 60#define BCSR0 ((uint)(BCSR_ADDR + 0x00))
23#define BCSR1 ((uint)0xff010004) 61#define BCSR1 ((uint)(BCSR_ADDR + 0x04))
24#define BCSR2 ((uint)0xff010008) 62#define BCSR2 ((uint)(BCSR_ADDR + 0x08))
25#define BCSR3 ((uint)0xff01000c) 63#define BCSR3 ((uint)(BCSR_ADDR + 0x0c))
26#define BCSR4 ((uint)0xff010010) 64#define BCSR4 ((uint)(BCSR_ADDR + 0x10))
27 65
28#define IMAP_ADDR ((uint)0xff000000) 66#define IMAP_ADDR ((uint)0xff000000)
29#define IMAP_SIZE ((uint)(64 * 1024)) 67#define IMAP_SIZE ((uint)(64 * 1024))
@@ -34,8 +72,17 @@
34/* Bits of interest in the BCSRs. 72/* Bits of interest in the BCSRs.
35 */ 73 */
36#define BCSR1_ETHEN ((uint)0x20000000) 74#define BCSR1_ETHEN ((uint)0x20000000)
75#define BCSR1_IRDAEN ((uint)0x10000000)
37#define BCSR1_RS232EN_1 ((uint)0x01000000) 76#define BCSR1_RS232EN_1 ((uint)0x01000000)
77#define BCSR1_PCCEN ((uint)0x00800000)
78#define BCSR1_PCCVCC0 ((uint)0x00400000)
79#define BCSR1_PCCVPP0 ((uint)0x00200000)
80#define BCSR1_PCCVPP1 ((uint)0x00100000)
81#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1)
38#define BCSR1_RS232EN_2 ((uint)0x00040000) 82#define BCSR1_RS232EN_2 ((uint)0x00040000)
83#define BCSR1_PCCVCC1 ((uint)0x00010000)
84#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1)
85
39#define BCSR4_ETHLOOP ((uint)0x80000000) /* EEST Loopback */ 86#define BCSR4_ETHLOOP ((uint)0x80000000) /* EEST Loopback */
40#define BCSR4_EEFDX ((uint)0x40000000) /* EEST FDX enable */ 87#define BCSR4_EEFDX ((uint)0x40000000) /* EEST FDX enable */
41#define BCSR4_FETH_EN ((uint)0x08000000) /* PHY enable */ 88#define BCSR4_FETH_EN ((uint)0x08000000) /* PHY enable */
@@ -44,14 +91,64 @@
44#define BCSR4_FETHFDE ((uint)0x02000000) /* PHY FDX advertise */ 91#define BCSR4_FETHFDE ((uint)0x02000000) /* PHY FDX advertise */
45#define BCSR4_FETHRST ((uint)0x00200000) /* PHY Reset */ 92#define BCSR4_FETHRST ((uint)0x00200000) /* PHY Reset */
46 93
94/* IO_BASE definition for pcmcia.
95 */
96#define _IO_BASE 0x80000000
97#define _IO_BASE_SIZE 0x1000
98
99#ifdef CONFIG_IDE
100#define MAX_HWIFS 1
101#endif
102
47/* Interrupt level assignments. 103/* Interrupt level assignments.
48 */ 104 */
49#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */ 105#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */
50#define PHY_INTERRUPT SIU_IRQ2 /* PHY link change interrupt */
51 106
52/* We don't use the 8259. 107/* We don't use the 8259.
53 */ 108 */
54#define NR_8259_INTS 0 109#define NR_8259_INTS 0
55 110
111/* CPM Ethernet through SCC1 or SCC2 */
112
113#ifdef CONFIG_SCC1_ENET /* Probably 860 variant */
114/* Bits in parallel I/O port registers that have to be set/cleared
115 * to configure the pins for SCC1 use.
116 * TCLK - CLK1, RCLK - CLK2.
117 */
118#define PA_ENET_RXD ((ushort)0x0001)
119#define PA_ENET_TXD ((ushort)0x0002)
120#define PA_ENET_TCLK ((ushort)0x0100)
121#define PA_ENET_RCLK ((ushort)0x0200)
122#define PB_ENET_TENA ((uint)0x00001000)
123#define PC_ENET_CLSN ((ushort)0x0010)
124#define PC_ENET_RENA ((ushort)0x0020)
125
126/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
127 * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
128 */
129#define SICR_ENET_MASK ((uint)0x000000ff)
130#define SICR_ENET_CLKRT ((uint)0x0000002c)
131#endif /* CONFIG_SCC1_ENET */
132
133#ifdef CONFIG_SCC2_ENET /* Probably 823/850 variant */
134/* Bits in parallel I/O port registers that have to be set/cleared
135 * to configure the pins for SCC1 use.
136 * TCLK - CLK1, RCLK - CLK2.
137 */
138#define PA_ENET_RXD ((ushort)0x0004)
139#define PA_ENET_TXD ((ushort)0x0008)
140#define PA_ENET_TCLK ((ushort)0x0400)
141#define PA_ENET_RCLK ((ushort)0x0200)
142#define PB_ENET_TENA ((uint)0x00002000)
143#define PC_ENET_CLSN ((ushort)0x0040)
144#define PC_ENET_RENA ((ushort)0x0080)
145
146/* Control bits in the SICR to route TCLK and RCLK to
147 * SCC2. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
148 */
149#define SICR_ENET_MASK ((uint)0x0000ff00)
150#define SICR_ENET_CLKRT ((uint)0x00002e00)
151#endif /* CONFIG_SCC2_ENET */
152
56#endif /* __ASM_FADS_H__ */ 153#endif /* __ASM_FADS_H__ */
57#endif /* __KERNEL__ */ 154#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/mpc885ads.h b/arch/ppc/platforms/mpc885ads.h
new file mode 100644
index 000000000000..eb386635b0fd
--- /dev/null
+++ b/arch/ppc/platforms/mpc885ads.h
@@ -0,0 +1,92 @@
1/*
2 * A collection of structures, addresses, and values associated with
3 * the Freescale MPC885ADS board.
4 * Copied from the FADS stuff.
5 *
6 * Author: MontaVista Software, Inc.
7 * source@mvista.com
8 *
9 * 2005 (c) MontaVista Software, Inc. This file is licensed under the
10 * terms of the GNU General Public License version 2. This program is licensed
11 * "as is" without any warranty of any kind, whether express or implied.
12 */
13
14#ifdef __KERNEL__
15#ifndef __ASM_MPC885ADS_H__
16#define __ASM_MPC885ADS_H__
17
18#include <linux/config.h>
19
20#include <asm/ppcboot.h>
21
22/* U-Boot maps BCSR to 0xff080000 */
23#define BCSR_ADDR ((uint)0xff080000)
24#define BCSR_SIZE ((uint)32)
25#define BCSR0 ((uint)(BCSR_ADDR + 0x00))
26#define BCSR1 ((uint)(BCSR_ADDR + 0x04))
27#define BCSR2 ((uint)(BCSR_ADDR + 0x08))
28#define BCSR3 ((uint)(BCSR_ADDR + 0x0c))
29#define BCSR4 ((uint)(BCSR_ADDR + 0x10))
30
31#define CFG_PHYDEV_ADDR ((uint)0xff0a0000)
32#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300))
33
34#define IMAP_ADDR ((uint)0xff000000)
35#define IMAP_SIZE ((uint)(64 * 1024))
36
37#define PCMCIA_MEM_ADDR ((uint)0xff020000)
38#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
39
40/* Bits of interest in the BCSRs.
41 */
42#define BCSR1_ETHEN ((uint)0x20000000)
43#define BCSR1_IRDAEN ((uint)0x10000000)
44#define BCSR1_RS232EN_1 ((uint)0x01000000)
45#define BCSR1_PCCEN ((uint)0x00800000)
46#define BCSR1_PCCVCC0 ((uint)0x00400000)
47#define BCSR1_PCCVPP0 ((uint)0x00200000)
48#define BCSR1_PCCVPP1 ((uint)0x00100000)
49#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1)
50#define BCSR1_RS232EN_2 ((uint)0x00040000)
51#define BCSR1_PCCVCC1 ((uint)0x00010000)
52#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1)
53
54#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/
55#define BCSR4_USB_LO_SPD ((uint)0x04000000)
56#define BCSR4_USB_VCC ((uint)0x02000000)
57#define BCSR4_USB_FULL_SPD ((uint)0x00040000)
58#define BCSR4_USB_EN ((uint)0x00020000)
59
60#define BCSR5_MII2_EN 0x40
61#define BCSR5_MII2_RST 0x20
62#define BCSR5_T1_RST 0x10
63#define BCSR5_ATM155_RST 0x08
64#define BCSR5_ATM25_RST 0x04
65#define BCSR5_MII1_EN 0x02
66#define BCSR5_MII1_RST 0x01
67
68/* Interrupt level assignments */
69#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */
70#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */
71#define SIU_INT_FEC2 SIU_LEVEL3 /* FEC2 interrupt */
72#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */
73
74/* We don't use the 8259 */
75#define NR_8259_INTS 0
76
77/* CPM Ethernet through SCC3 */
78#define PA_ENET_RXD ((ushort)0x0040)
79#define PA_ENET_TXD ((ushort)0x0080)
80#define PE_ENET_TCLK ((uint)0x00004000)
81#define PE_ENET_RCLK ((uint)0x00008000)
82#define PE_ENET_TENA ((uint)0x00000010)
83#define PC_ENET_CLSN ((ushort)0x0400)
84#define PC_ENET_RENA ((ushort)0x0800)
85
86/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to
87 * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */
88#define SICR_ENET_MASK ((uint)0x00ff0000)
89#define SICR_ENET_CLKRT ((uint)0x002c0000)
90
91#endif /* __ASM_MPC885ADS_H__ */
92#endif /* __KERNEL__ */
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index de26cf7b003c..7911912f50c7 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -94,12 +94,42 @@ void smc1_lineif(struct uart_cpm_port *pinfo)
94 ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits; 94 ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
95 } 95 }
96 96
97#ifdef CONFIG_MPC885ADS
98 /* Enable SMC1 transceivers */
99 {
100 volatile uint __iomem *bcsr1 = ioremap(BCSR1, 4);
101 uint tmp;
102
103 tmp = in_be32(bcsr1);
104 tmp &= ~BCSR1_RS232EN_1;
105 out_be32(bcsr1, tmp);
106 iounmap(bcsr1);
107 }
108#endif
109
97 pinfo->brg = 1; 110 pinfo->brg = 1;
98} 111}
99 112
100void smc2_lineif(struct uart_cpm_port *pinfo) 113void smc2_lineif(struct uart_cpm_port *pinfo)
101{ 114{
102 /* XXX SMC2: insert port configuration here */ 115#ifdef CONFIG_MPC885ADS
116 volatile cpm8xx_t *cp = cpmp;
117 volatile uint __iomem *bcsr1;
118 uint tmp;
119
120 cp->cp_pepar |= 0x00000c00;
121 cp->cp_pedir &= ~0x00000c00;
122 cp->cp_peso &= ~0x00000400;
123 cp->cp_peso |= 0x00000800;
124
125 /* Enable SMC2 transceivers */
126 bcsr1 = ioremap(BCSR1, 4);
127 tmp = in_be32(bcsr1);
128 tmp &= ~BCSR1_RS232EN_2;
129 out_be32(bcsr1, tmp);
130 iounmap(bcsr1);
131#endif
132
103 pinfo->brg = 2; 133 pinfo->brg = 2;
104} 134}
105 135
diff --git a/include/asm-ppc/mpc8xx.h b/include/asm-ppc/mpc8xx.h
index 714d69c819d3..7c31f2d564a1 100644
--- a/include/asm-ppc/mpc8xx.h
+++ b/include/asm-ppc/mpc8xx.h
@@ -68,6 +68,10 @@
68#include <platforms/lantec.h> 68#include <platforms/lantec.h>
69#endif 69#endif
70 70
71#if defined(CONFIG_MPC885ADS)
72#include <platforms/mpc885ads.h>
73#endif
74
71/* Currently, all 8xx boards that support a processor to PCI/ISA bridge 75/* Currently, all 8xx boards that support a processor to PCI/ISA bridge
72 * use the same memory map. 76 * use the same memory map.
73 */ 77 */
generated by cgit v1.2.2 (git 2.25.0) at 2024-09-24 07:19:05 -0400