drivers/net/qla3xxx: trim trailing whitespace

Also, hopefully, change the file permissions to 0644.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

2 files changed, 67 insertions, 67 deletions

diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 48069ece4e51..30adf726743c 100755..100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -81,7 +81,7 @@ typedef enum {
 } PHY_DEVICE_et;
 
 typedef struct {
-        PHY_DEVICE_et phyDevice; 
+        PHY_DEVICE_et phyDevice;
         u32             phyIdOUI;
         u16             phyIdModel;
         char            *name;
@@ -330,7 +330,7 @@ static void ql_release_to_lrg_buf_free_list(struct ql3_adapter *qdev,
                                              PCI_DMA_FROMDEVICE);
                         err = pci_dma_mapping_error(map);
                         if(err) {
-                                printk(KERN_ERR "%s: PCI mapping failed with error: %d\n", 
+                                printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
                                        qdev->ndev->name, err);
                                 dev_kfree_skb(lrg_buf_cb->skb);
                                 lrg_buf_cb->skb = NULL;
@@ -884,14 +884,14 @@ static void ql_petbi_start_neg_ex(struct ql3_adapter *qdev)
         u16 reg;
 
         /* Enable Auto-negotiation sense */
-        ql_mii_read_reg_ex(qdev, PETBI_TBI_CTRL, &reg, 
+        ql_mii_read_reg_ex(qdev, PETBI_TBI_CTRL, &reg,
                            PHYAddr[qdev->mac_index]);
         reg |= PETBI_TBI_AUTO_SENSE;
-        ql_mii_write_reg_ex(qdev, PETBI_TBI_CTRL, reg, 
+        ql_mii_write_reg_ex(qdev, PETBI_TBI_CTRL, reg,
                             PHYAddr[qdev->mac_index]);
 
         ql_mii_write_reg_ex(qdev, PETBI_NEG_ADVER,
-                            PETBI_NEG_PAUSE | PETBI_NEG_DUPLEX, 
+                            PETBI_NEG_PAUSE | PETBI_NEG_DUPLEX,
                             PHYAddr[qdev->mac_index]);
 
         ql_mii_write_reg_ex(qdev, PETBI_CONTROL_REG,
@@ -945,7 +945,7 @@ static void phyAgereSpecificInit(struct ql3_adapter *qdev, u32 miiAddr)
         ql_mii_write_reg_ex(qdev, 0x10, 0x2806, miiAddr);
         /* Write new PHYAD w/bit 5 set */
         ql_mii_write_reg_ex(qdev, 0x11, 0x0020 | (PHYAddr[qdev->mac_index] >> 8), miiAddr);
-        /* 
+        /*
          * Disable diagnostic mode bit 2 = 0
          * Power up device bit 11 = 0
          * Link up (on) and activity (blink)
@@ -955,18 +955,18 @@ static void phyAgereSpecificInit(struct ql3_adapter *qdev, u32 miiAddr)
         ql_mii_write_reg(qdev, 0x1c, 0xfaf0);
 }
 
-static PHY_DEVICE_et getPhyType (struct ql3_adapter *qdev, 
+static PHY_DEVICE_et getPhyType (struct ql3_adapter *qdev,
                                  u16 phyIdReg0, u16 phyIdReg1)
 {
         PHY_DEVICE_et result = PHY_TYPE_UNKNOWN;
-        u32   oui;     
+        u32   oui;
         u16   model;
-        int i;   
+        int i;
 
         if (phyIdReg0 == 0xffff) {
                 return result;
         }
-   
+
         if (phyIdReg1 == 0xffff) {
                 return result;
         }
@@ -984,7 +984,7 @@ static PHY_DEVICE_et getPhyType (struct ql3_adapter *qdev,
 
                         printk(KERN_INFO "%s: Phy: %s\n",
                                 qdev->ndev->name, PHY_DEVICES[i].name);
-                        
+
                         break;
                 }
         }
@@ -1033,7 +1033,7 @@ static int ql_is_full_dup(struct ql3_adapter *qdev)
         {
                 if (ql_mii_read_reg(qdev, 0x1A, &reg))
                         return 0;
-                        
+
                 return ((reg & 0x0080) && (reg & 0x1000)) != 0;
         }
         case PHY_VITESSE_VSC8211:
@@ -1082,19 +1082,19 @@ static int PHY_Setup(struct ql3_adapter *qdev)
         /*  Check if we have a Agere PHY */
         if ((reg1 == 0xffff) || (reg2 == 0xffff)) {
 
-                /* Determine which MII address we should be using 
+                /* Determine which MII address we should be using
                    determined by the index of the card */
                 if (qdev->mac_index == 0) {
                         miiAddr = MII_AGERE_ADDR_1;
                 } else {
                         miiAddr = MII_AGERE_ADDR_2;
                 }
-      
+
                 err =ql_mii_read_reg_ex(qdev, PHY_ID_0_REG, &reg1, miiAddr);
                 if(err != 0) {
                         printk(KERN_ERR "%s: Could not read from reg PHY_ID_0_REG after Agere detected\n",
                                qdev->ndev->name);
-                        return err; 
+                        return err;
                 }
 
                 err = ql_mii_read_reg_ex(qdev, PHY_ID_1_REG, &reg2, miiAddr);
@@ -1103,9 +1103,9 @@ static int PHY_Setup(struct ql3_adapter *qdev)
                                qdev->ndev->name);
                         return err;
                 }
-   
+
                 /*  We need to remember to initialize the Agere PHY */
-                agereAddrChangeNeeded = true; 
+                agereAddrChangeNeeded = true;
         }
 
         /*  Determine the particular PHY we have on board to apply
@@ -1114,7 +1114,7 @@ static int PHY_Setup(struct ql3_adapter *qdev)
 
         if ((qdev->phyType == PHY_AGERE_ET1011C) && agereAddrChangeNeeded) {
                 /* need this here so address gets changed */
-                phyAgereSpecificInit(qdev, miiAddr);  
+                phyAgereSpecificInit(qdev, miiAddr);
         } else if (qdev->phyType == PHY_TYPE_UNKNOWN) {
                 printk(KERN_ERR "%s: PHY is unknown\n", qdev->ndev->name);
                 return -EIO;
@@ -1427,7 +1427,7 @@ static int ql_this_adapter_controls_port(struct ql3_adapter *qdev)
 
 static void ql_phy_reset_ex(struct ql3_adapter *qdev)
 {
-        ql_mii_write_reg_ex(qdev, CONTROL_REG, PHY_CTRL_SOFT_RESET, 
+        ql_mii_write_reg_ex(qdev, CONTROL_REG, PHY_CTRL_SOFT_RESET,
                             PHYAddr[qdev->mac_index]);
 }
 
@@ -1438,7 +1438,7 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev)
 
         if(qdev->phyType == PHY_AGERE_ET1011C) {
                 /* turn off external loopback */
-                ql_mii_write_reg(qdev, 0x13, 0x0000); 
+                ql_mii_write_reg(qdev, 0x13, 0x0000);
         }
 
         if(qdev->mac_index == 0)
@@ -1452,23 +1452,23 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev)
                 portConfiguration = PORT_CONFIG_DEFAULT;
 
         /* Set the 1000 advertisements */
-        ql_mii_read_reg_ex(qdev, PHY_GIG_CONTROL, &reg, 
+        ql_mii_read_reg_ex(qdev, PHY_GIG_CONTROL, &reg,
                            PHYAddr[qdev->mac_index]);
         reg &= ~PHY_GIG_ALL_PARAMS;
 
-        if(portConfiguration & 
+        if(portConfiguration &
            PORT_CONFIG_FULL_DUPLEX_ENABLED &
            PORT_CONFIG_1000MB_SPEED) {
                 reg |= PHY_GIG_ADV_1000F;
         }
-         
-        if(portConfiguration & 
+
+        if(portConfiguration &
            PORT_CONFIG_HALF_DUPLEX_ENABLED &
            PORT_CONFIG_1000MB_SPEED) {
                 reg |= PHY_GIG_ADV_1000H;
         }
 
-        ql_mii_write_reg_ex(qdev, PHY_GIG_CONTROL, reg, 
+        ql_mii_write_reg_ex(qdev, PHY_GIG_CONTROL, reg,
                             PHYAddr[qdev->mac_index]);
 
         /* Set the 10/100 & pause negotiation advertisements */
@@ -1482,7 +1482,7 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev)
         if(portConfiguration & PORT_CONFIG_FULL_DUPLEX_ENABLED) {
                 if(portConfiguration & PORT_CONFIG_100MB_SPEED)
                         reg |= PHY_NEG_ADV_100F;
-                
+
                 if(portConfiguration & PORT_CONFIG_10MB_SPEED)
                         reg |= PHY_NEG_ADV_10F;
         }
@@ -1490,22 +1490,22 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev)
         if(portConfiguration & PORT_CONFIG_HALF_DUPLEX_ENABLED) {
                 if(portConfiguration & PORT_CONFIG_100MB_SPEED)
                         reg |= PHY_NEG_ADV_100H;
-                
+
                 if(portConfiguration & PORT_CONFIG_10MB_SPEED)
                         reg |= PHY_NEG_ADV_10H;
         }
 
         if(portConfiguration &
            PORT_CONFIG_1000MB_SPEED) {
-                reg |= 1;       
+                reg |= 1;
         }
 
-        ql_mii_write_reg_ex(qdev, PHY_NEG_ADVER, reg, 
+        ql_mii_write_reg_ex(qdev, PHY_NEG_ADVER, reg,
                             PHYAddr[qdev->mac_index]);
 
         ql_mii_read_reg_ex(qdev, CONTROL_REG, &reg, PHYAddr[qdev->mac_index]);
-        
-        ql_mii_write_reg_ex(qdev, CONTROL_REG, 
+
+        ql_mii_write_reg_ex(qdev, CONTROL_REG,
                             reg | PHY_CTRL_RESTART_NEG | PHY_CTRL_AUTO_NEG,
                             PHYAddr[qdev->mac_index]);
 }
@@ -1660,7 +1660,7 @@ static void ql_link_state_machine(struct ql3_adapter *qdev)
                                "%s: Reset in progress, skip processing link "
                                "state.\n", qdev->ndev->name);
 
-                spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);               
+                spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
                 return;
         }
 
@@ -1752,7 +1752,7 @@ static int ql_mii_setup(struct ql3_adapter *qdev)
                 return -1;
 
         if (qdev->device_id == QL3032_DEVICE_ID)
-                ql_write_page0_reg(qdev, 
+                ql_write_page0_reg(qdev,
                         &port_regs->macMIIMgmtControlReg, 0x0f00000);
 
         /* Divide 125MHz clock by 28 to meet PHY timing requirements */
@@ -1936,7 +1936,7 @@ static int ql_populate_free_queue(struct ql3_adapter *qdev)
 
                                 err = pci_dma_mapping_error(map);
                                 if(err) {
-                                        printk(KERN_ERR "%s: PCI mapping failed with error: %d\n", 
+                                        printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
                                                qdev->ndev->name, err);
                                         dev_kfree_skb(lrg_buf_cb->skb);
                                         lrg_buf_cb->skb = NULL;
@@ -2044,7 +2044,7 @@ static void ql_process_mac_tx_intr(struct ql3_adapter *qdev,
         if(mac_rsp->flags & OB_MAC_IOCB_RSP_S) {
                 printk(KERN_WARNING "Frame short but, frame was padded and sent.\n");
         }
-        
+
         tx_cb = &qdev->tx_buf[mac_rsp->transaction_id];
 
         /*  Check the transmit response flags for any errors */
@@ -2108,13 +2108,13 @@ static struct ql_rcv_buf_cb *ql_get_lbuf(struct ql3_adapter *qdev)
 
 /*
  * The difference between 3022 and 3032 for inbound completions:
- * 3022 uses two buffers per completion.  The first buffer contains 
- * (some) header info, the second the remainder of the headers plus 
- * the data.  For this chip we reserve some space at the top of the 
- * receive buffer so that the header info in buffer one can be 
- * prepended to the buffer two.  Buffer two is the sent up while 
+ * 3022 uses two buffers per completion.  The first buffer contains
+ * (some) header info, the second the remainder of the headers plus
+ * the data.  For this chip we reserve some space at the top of the
+ * receive buffer so that the header info in buffer one can be
+ * prepended to the buffer two.  Buffer two is the sent up while
  * buffer one is returned to the hardware to be reused.
- * 3032 receives all of it's data and headers in one buffer for a 
+ * 3032 receives all of it's data and headers in one buffer for a
  * simpler process.  3032 also supports checksum verification as
  * can be seen in ql_process_macip_rx_intr().
  */
@@ -2205,13 +2205,13 @@ static void ql_process_macip_rx_intr(struct ql3_adapter *qdev,
                                                  skb_push(skb2, size), size);
         } else {
                 u16 checksum = le16_to_cpu(ib_ip_rsp_ptr->checksum);
-                if (checksum & 
-                        (IB_IP_IOCB_RSP_3032_ICE | 
-                         IB_IP_IOCB_RSP_3032_CE)) { 
+                if (checksum &
+                        (IB_IP_IOCB_RSP_3032_ICE |
+                         IB_IP_IOCB_RSP_3032_CE)) {
                         printk(KERN_ERR
                                "%s: Bad checksum for this %s packet, checksum = %x.\n",
                                __func__,
-                               ((checksum & 
+                               ((checksum &
                                 IB_IP_IOCB_RSP_3032_TCP) ? "TCP" :
                                 "UDP"),checksum);
                 } else if ((checksum & IB_IP_IOCB_RSP_3032_TCP) ||
@@ -2394,12 +2394,12 @@ static irqreturn_t ql3xxx_isr(int irq, void *dev_id)
 }
 
 /*
- * Get the total number of segments needed for the 
+ * Get the total number of segments needed for the
  * given number of fragments.  This is necessary because
  * outbound address lists (OAL) will be used when more than
- * two frags are given.  Each address list has 5 addr/len 
+ * two frags are given.  Each address list has 5 addr/len
  * pairs.  The 5th pair in each AOL is used to  point to
- * the next AOL if more frags are coming.  
+ * the next AOL if more frags are coming.
  * That is why the frags:segment count  ratio is not linear.
  */
 static int ql_get_seg_count(struct ql3_adapter *qdev,
@@ -2476,12 +2476,12 @@ static int ql_send_map(struct ql3_adapter *qdev,
 
         err = pci_dma_mapping_error(map);
         if(err) {
-                printk(KERN_ERR "%s: PCI mapping failed with error: %d\n", 
+                printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
                        qdev->ndev->name, err);
 
                 return NETDEV_TX_BUSY;
         }
-        
+
         oal_entry = (struct oal_entry *)&mac_iocb_ptr->buf_addr0_low;
         oal_entry->dma_lo = cpu_to_le32(LS_64BITS(map));
         oal_entry->dma_hi = cpu_to_le32(MS_64BITS(map));
@@ -2511,7 +2511,7 @@ static int ql_send_map(struct ql3_adapter *qdev,
                                 err = pci_dma_mapping_error(map);
                                 if(err) {
 
-                                        printk(KERN_ERR "%s: PCI mapping outbound address list with error: %d\n", 
+                                        printk(KERN_ERR "%s: PCI mapping outbound address list with error: %d\n",
                                                qdev->ndev->name, err);
                                         goto map_error;
                                 }
@@ -2537,7 +2537,7 @@ static int ql_send_map(struct ql3_adapter *qdev,
 
                         err = pci_dma_mapping_error(map);
                         if(err) {
-                                printk(KERN_ERR "%s: PCI mapping frags failed with error: %d\n", 
+                                printk(KERN_ERR "%s: PCI mapping frags failed with error: %d\n",
                                        qdev->ndev->name, err);
                                 goto map_error;
                         }
@@ -2558,10 +2558,10 @@ static int ql_send_map(struct ql3_adapter *qdev,
 
 map_error:
         /* A PCI mapping failed and now we will need to back out
-         * We need to traverse through the oal's and associated pages which 
+         * We need to traverse through the oal's and associated pages which
          * have been mapped and now we must unmap them to clean up properly
          */
-        
+
         seg = 1;
         oal_entry = (struct oal_entry *)&mac_iocb_ptr->buf_addr0_low;
         oal = tx_cb->oal;
@@ -2599,11 +2599,11 @@ map_error:
  * The difference between 3022 and 3032 sends:
  * 3022 only supports a simple single segment transmission.
  * 3032 supports checksumming and scatter/gather lists (fragments).
- * The 3032 supports sglists by using the 3 addr/len pairs (ALP) 
- * in the IOCB plus a chain of outbound address lists (OAL) that 
- * each contain 5 ALPs.  The last ALP of the IOCB (3rd) or OAL (5th) 
- * will used to point to an OAL when more ALP entries are required.  
- * The IOCB is always the top of the chain followed by one or more 
+ * The 3032 supports sglists by using the 3 addr/len pairs (ALP)
+ * in the IOCB plus a chain of outbound address lists (OAL) that
+ * each contain 5 ALPs.  The last ALP of the IOCB (3rd) or OAL (5th)
+ * will used to point to an OAL when more ALP entries are required.
+ * The IOCB is always the top of the chain followed by one or more
  * OALs (when necessary).
  */
 static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
@@ -2617,14 +2617,14 @@ static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
         if (unlikely(atomic_read(&qdev->tx_count) < 2)) {
                 return NETDEV_TX_BUSY;
         }
-        
+
         tx_cb = &qdev->tx_buf[qdev->req_producer_index] ;
         if((tx_cb->seg_count = ql_get_seg_count(qdev,
                                                 (skb_shinfo(skb)->nr_frags))) == -1) {
                 printk(KERN_ERR PFX"%s: invalid segment count!\n",__func__);
                 return NETDEV_TX_OK;
         }
-        
+
         mac_iocb_ptr = tx_cb->queue_entry;
         memset((void *)mac_iocb_ptr, 0, sizeof(struct ob_mac_iocb_req));
         mac_iocb_ptr->opcode = qdev->mac_ob_opcode;
@@ -2636,12 +2636,12 @@ static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
         if (qdev->device_id == QL3032_DEVICE_ID &&
             skb->ip_summed == CHECKSUM_PARTIAL)
                 ql_hw_csum_setup(skb, mac_iocb_ptr);
-        
+
         if(ql_send_map(qdev,mac_iocb_ptr,tx_cb,skb) != NETDEV_TX_OK) {
                 printk(KERN_ERR PFX"%s: Could not map the segments!\n",__func__);
                 return NETDEV_TX_BUSY;
         }
-        
+
         wmb();
         qdev->req_producer_index++;
         if (qdev->req_producer_index == NUM_REQ_Q_ENTRIES)
@@ -2739,7 +2739,7 @@ static int ql_alloc_buffer_queues(struct ql3_adapter *qdev)
                        "%s: qdev->lrg_buf alloc failed.\n", qdev->ndev->name);
                 return -ENOMEM;
         }
-        
+
         qdev->lrg_buf_q_alloc_virt_addr =
             pci_alloc_consistent(qdev->pdev,
                                  qdev->lrg_buf_q_alloc_size,
diff --git a/drivers/net/qla3xxx.h b/drivers/net/qla3xxx.h
index 483840f7fc10..fbcb0b949639 100755..100644
--- a/drivers/net/qla3xxx.h
+++ b/drivers/net/qla3xxx.h
@@ -556,7 +556,7 @@ enum {
         IP_ADDR_INDEX_REG_FUNC_3_SEC = 0x0007,
         IP_ADDR_INDEX_REG_6 = 0x0008,
         IP_ADDR_INDEX_REG_OFFSET_MASK = 0x0030,
-        IP_ADDR_INDEX_REG_E = 0x0040, 
+        IP_ADDR_INDEX_REG_E = 0x0040,
 };
 enum {
         QL3032_PORT_CONTROL_DS = 0x0001,
@@ -1112,7 +1112,7 @@ struct ql_rcv_buf_cb {
  * OAL has 5 entries:
  * 1 thru 4 point to frags
  * fifth points to next oal.
- */ 
+ */
 #define MAX_OAL_CNT ((MAX_SKB_FRAGS-1)/4 + 1)
 
 struct oal_entry {
@@ -1137,7 +1137,7 @@ struct ql_tx_buf_cb {
         struct ob_mac_iocb_req *queue_entry ;
         int seg_count;
         struct oal *oal;
-        struct map_list map[MAX_SKB_FRAGS+1]; 
+        struct map_list map[MAX_SKB_FRAGS+1];
 };
 
 /* definitions for type field */