aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorRob Landley <rob@landley.net>2005-11-07 04:01:09 -0500
committerLinus Torvalds <torvalds@g5.osdl.org>2005-11-07 10:53:56 -0500
commit7f46a240b0a1797eb641c046d445f026563463d4 (patch)
treef45cc4bccb355b147b2bbf8b0c329b71466aeed5
parentcbf8f0f36a2339f87b9dabbbd301ffd86744620c (diff)
[PATCH] ramfs, rootfs, and initramfs docs
Docs for ramfs, rootfs, and initramfs. Signed-off-by: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-rw-r--r--Documentation/filesystems/ramfs-rootfs-initramfs.txt195
1 files changed, 195 insertions, 0 deletions
diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.txt b/Documentation/filesystems/ramfs-rootfs-initramfs.txt
new file mode 100644
index 000000000000..b3404a032596
--- /dev/null
+++ b/Documentation/filesystems/ramfs-rootfs-initramfs.txt
@@ -0,0 +1,195 @@
1ramfs, rootfs and initramfs
2October 17, 2005
3Rob Landley <rob@landley.net>
4=============================
5
6What is ramfs?
7--------------
8
9Ramfs is a very simple filesystem that exports Linux's disk caching
10mechanisms (the page cache and dentry cache) as a dynamically resizable
11ram-based filesystem.
12
13Normally all files are cached in memory by Linux. Pages of data read from
14backing store (usually the block device the filesystem is mounted on) are kept
15around in case it's needed again, but marked as clean (freeable) in case the
16Virtual Memory system needs the memory for something else. Similarly, data
17written to files is marked clean as soon as it has been written to backing
18store, but kept around for caching purposes until the VM reallocates the
19memory. A similar mechanism (the dentry cache) greatly speeds up access to
20directories.
21
22With ramfs, there is no backing store. Files written into ramfs allocate
23dentries and page cache as usual, but there's nowhere to write them to.
24This means the pages are never marked clean, so they can't be freed by the
25VM when it's looking to recycle memory.
26
27The amount of code required to implement ramfs is tiny, because all the
28work is done by the existing Linux caching infrastructure. Basically,
29you're mounting the disk cache as a filesystem. Because of this, ramfs is not
30an optional component removable via menuconfig, since there would be negligible
31space savings.
32
33ramfs and ramdisk:
34------------------
35
36The older "ram disk" mechanism created a synthetic block device out of
37an area of ram and used it as backing store for a filesystem. This block
38device was of fixed size, so the filesystem mounted on it was of fixed
39size. Using a ram disk also required unnecessarily copying memory from the
40fake block device into the page cache (and copying changes back out), as well
41as creating and destroying dentries. Plus it needed a filesystem driver
42(such as ext2) to format and interpret this data.
43
44Compared to ramfs, this wastes memory (and memory bus bandwidth), creates
45unnecessary work for the CPU, and pollutes the CPU caches. (There are tricks
46to avoid this copying by playing with the page tables, but they're unpleasantly
47complicated and turn out to be about as expensive as the copying anyway.)
48More to the point, all the work ramfs is doing has to happen _anyway_,
49since all file access goes through the page and dentry caches. The ram
50disk is simply unnecessary, ramfs is internally much simpler.
51
52Another reason ramdisks are semi-obsolete is that the introduction of
53loopback devices offered a more flexible and convenient way to create
54synthetic block devices, now from files instead of from chunks of memory.
55See losetup (8) for details.
56
57ramfs and tmpfs:
58----------------
59
60One downside of ramfs is you can keep writing data into it until you fill
61up all memory, and the VM can't free it because the VM thinks that files
62should get written to backing store (rather than swap space), but ramfs hasn't
63got any backing store. Because of this, only root (or a trusted user) should
64be allowed write access to a ramfs mount.
65
66A ramfs derivative called tmpfs was created to add size limits, and the ability
67to write the data to swap space. Normal users can be allowed write access to
68tmpfs mounts. See Documentation/filesystems/tmpfs.txt for more information.
69
70What is rootfs?
71---------------
72
73Rootfs is a special instance of ramfs, which is always present in 2.6 systems.
74(It's used internally as the starting and stopping point for searches of the
75kernel's doubly-linked list of mount points.)
76
77Most systems just mount another filesystem over it and ignore it. The
78amount of space an empty instance of ramfs takes up is tiny.
79
80What is initramfs?
81------------------
82
83All 2.6 Linux kernels contain a gzipped "cpio" format archive, which is
84extracted into rootfs when the kernel boots up. After extracting, the kernel
85checks to see if rootfs contains a file "init", and if so it executes it as PID
861. If found, this init process is responsible for bringing the system the
87rest of the way up, including locating and mounting the real root device (if
88any). If rootfs does not contain an init program after the embedded cpio
89archive is extracted into it, the kernel will fall through to the older code
90to locate and mount a root partition, then exec some variant of /sbin/init
91out of that.
92
93All this differs from the old initrd in several ways:
94
95 - The old initrd was a separate file, while the initramfs archive is linked
96 into the linux kernel image. (The directory linux-*/usr is devoted to
97 generating this archive during the build.)
98
99 - The old initrd file was a gzipped filesystem image (in some file format,
100 such as ext2, that had to be built into the kernel), while the new
101 initramfs archive is a gzipped cpio archive (like tar only simpler,
102 see cpio(1) and Documentation/early-userspace/buffer-format.txt).
103
104 - The program run by the old initrd (which was called /initrd, not /init) did
105 some setup and then returned to the kernel, while the init program from
106 initramfs is not expected to return to the kernel. (If /init needs to hand
107 off control it can overmount / with a new root device and exec another init
108 program. See the switch_root utility, below.)
109
110 - When switching another root device, initrd would pivot_root and then
111 umount the ramdisk. But initramfs is rootfs: you can neither pivot_root
112 rootfs, nor unmount it. Instead delete everything out of rootfs to
113 free up the space (find -xdev / -exec rm '{}' ';'), overmount rootfs
114 with the new root (cd /newmount; mount --move . /; chroot .), attach
115 stdin/stdout/stderr to the new /dev/console, and exec the new init.
116
117 Since this is a remarkably persnickity process (and involves deleting
118 commands before you can run them), the klibc package introduced a helper
119 program (utils/run_init.c) to do all this for you. Most other packages
120 (such as busybox) have named this command "switch_root".
121
122Populating initramfs:
123---------------------
124
125The 2.6 kernel build process always creates a gzipped cpio format initramfs
126archive and links it into the resulting kernel binary. By default, this
127archive is empty (consuming 134 bytes on x86). The config option
128CONFIG_INITRAMFS_SOURCE (for some reason buried under devices->block devices
129in menuconfig, and living in usr/Kconfig) can be used to specify a source for
130the initramfs archive, which will automatically be incorporated into the
131resulting binary. This option can point to an existing gzipped cpio archive, a
132directory containing files to be archived, or a text file specification such
133as the following example:
134
135 dir /dev 755 0 0
136 nod /dev/console 644 0 0 c 5 1
137 nod /dev/loop0 644 0 0 b 7 0
138 dir /bin 755 1000 1000
139 slink /bin/sh busybox 777 0 0
140 file /bin/busybox initramfs/busybox 755 0 0
141 dir /proc 755 0 0
142 dir /sys 755 0 0
143 dir /mnt 755 0 0
144 file /init initramfs/init.sh 755 0 0
145
146One advantage of the text file is that root access is not required to
147set permissions or create device nodes in the new archive. (Note that those
148two example "file" entries expect to find files named "init.sh" and "busybox" in
149a directory called "initramfs", under the linux-2.6.* directory. See
150Documentation/early-userspace/README for more details.)
151
152If you don't already understand what shared libraries, devices, and paths
153you need to get a minimal root filesystem up and running, here are some
154references:
155http://www.tldp.org/HOWTO/Bootdisk-HOWTO/
156http://www.tldp.org/HOWTO/From-PowerUp-To-Bash-Prompt-HOWTO.html
157http://www.linuxfromscratch.org/lfs/view/stable/
158
159The "klibc" package (http://www.kernel.org/pub/linux/libs/klibc) is
160designed to be a tiny C library to statically link early userspace
161code against, along with some related utilities. It is BSD licensed.
162
163I use uClibc (http://www.uclibc.org) and busybox (http://www.busybox.net)
164myself. These are LGPL and GPL, respectively.
165
166In theory you could use glibc, but that's not well suited for small embedded
167uses like this. (A "hello world" program statically linked against glibc is
168over 400k. With uClibc it's 7k. Also note that glibc dlopens libnss to do
169name lookups, even when otherwise statically linked.)
170
171Future directions:
172------------------
173
174Today (2.6.14), initramfs is always compiled in, but not always used. The
175kernel falls back to legacy boot code that is reached only if initramfs does
176not contain an /init program. The fallback is legacy code, there to ensure a
177smooth transition and allowing early boot functionality to gradually move to
178"early userspace" (I.E. initramfs).
179
180The move to early userspace is necessary because finding and mounting the real
181root device is complex. Root partitions can span multiple devices (raid or
182separate journal). They can be out on the network (requiring dhcp, setting a
183specific mac address, logging into a server, etc). They can live on removable
184media, with dynamically allocated major/minor numbers and persistent naming
185issues requiring a full udev implementation to sort out. They can be
186compressed, encrypted, copy-on-write, loopback mounted, strangely partitioned,
187and so on.
188
189This kind of complexity (which inevitably includes policy) is rightly handled
190in userspace. Both klibc and busybox/uClibc are working on simple initramfs
191packages to drop into a kernel build, and when standard solutions are ready
192and widely deployed, the kernel's legacy early boot code will become obsolete
193and a candidate for the feature removal schedule.
194
195But that's a while off yet.