USB: delete airprime driver

This driver is only for one device id, and the option driver should be
used instead for it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

4 files changed, 2 insertions, 362 deletions

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 9a7681b55266..8878c1767fc8 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -64,14 +64,6 @@ config USB_SERIAL_AIRCABLE
             To compile this driver as a module, choose M here: the module
             will be called aircable.
 
-config USB_SERIAL_AIRPRIME
-        tristate "USB AirPrime CDMA Wireless Driver"
-        help
-          Say Y here if you want to use a AirPrime CDMA Wireless PC card.
-
-          To compile this driver as a module, choose M here: the
-          module will be called airprime.
-
 config USB_SERIAL_ARK3116
         tristate "USB ARK Micro 3116 USB Serial Driver"
         help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 17a762ab6769..6047f818adfe 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -12,7 +12,6 @@ usbserial-obj-$(CONFIG_USB_EZUSB)		+= ezusb.o
 usbserial-objs  := usb-serial.o generic.o bus.o $(usbserial-obj-y)
 
 obj-$(CONFIG_USB_SERIAL_AIRCABLE)               += aircable.o
-obj-$(CONFIG_USB_SERIAL_AIRPRIME)               += airprime.o
 obj-$(CONFIG_USB_SERIAL_ARK3116)                += ark3116.o
 obj-$(CONFIG_USB_SERIAL_BELKIN)                 += belkin_sa.o
 obj-$(CONFIG_USB_SERIAL_CH341)                  += ch341.o
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
deleted file mode 100644
index 0798c14ce787..000000000000
--- a/drivers/usb/serial/airprime.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * AirPrime CDMA Wireless Serial USB driver
- *
- * Copyright (C) 2005-2006 Greg Kroah-Hartman <gregkh@suse.de>
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License version
- *      2 as published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-static struct usb_device_id id_table [] = {
-        { USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
-        { },
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-#define URB_TRANSFER_BUFFER_SIZE        4096
-#define NUM_READ_URBS                   4
-#define NUM_WRITE_URBS                  4
-#define NUM_BULK_EPS                    3
-#define MAX_BULK_EPS                    6
-
-/* if overridden by the user, then use their value for the size of the
- * read and write urbs, and the number of endpoints */
-static int buffer_size = URB_TRANSFER_BUFFER_SIZE;
-static int endpoints = NUM_BULK_EPS;
-static int debug;
-struct airprime_private {
-        spinlock_t lock;
-        int outstanding_urbs;
-        int throttled;
-        struct urb *read_urbp[NUM_READ_URBS];
-
-        /* Settings for the port */
-        int rts_state;  /* Handshaking pins (outputs) */
-        int dtr_state;
-        int cts_state;  /* Handshaking pins (inputs) */
-        int dsr_state;
-        int dcd_state;
-        int ri_state;
-};
-
-static int airprime_send_setup(struct usb_serial_port *port)
-{
-        struct usb_serial *serial = port->serial;
-        struct airprime_private *priv;
-
-        dbg("%s", __func__);
-
-        if (port->number != 0)
-                return 0;
-
-        priv = usb_get_serial_port_data(port);
-
-        if (port->tty) {
-                int val = 0;
-                if (priv->dtr_state)
-                        val |= 0x01;
-                if (priv->rts_state)
-                        val |= 0x02;
-
-                return usb_control_msg(serial->dev,
-                                        usb_rcvctrlpipe(serial->dev, 0),
-                                        0x22, 0x21, val, 0, NULL, 0,
-                                        USB_CTRL_SET_TIMEOUT);
-        }
-
-        return 0;
-}
-
-static void airprime_read_bulk_callback(struct urb *urb)
-{
-        struct usb_serial_port *port = urb->context;
-        unsigned char *data = urb->transfer_buffer;
-        struct tty_struct *tty;
-        int result;
-        int status = urb->status;
-
-        dbg("%s - port %d", __func__, port->number);
-
-        if (status) {
-                dbg("%s - nonzero read bulk status received: %d",
-                    __func__, status);
-                return;
-        }
-        usb_serial_debug_data(debug, &port->dev, __func__,
-                                                urb->actual_length, data);
-
-        tty = port->tty;
-        if (tty && urb->actual_length) {
-                tty_insert_flip_string(tty, data, urb->actual_length);
-                tty_flip_buffer_push(tty);
-        }
-
-        result = usb_submit_urb(urb, GFP_ATOMIC);
-        if (result)
-                dev_err(&port->dev,
-                        "%s - failed resubmitting read urb, error %d\n",
-                        __func__, result);
-        return;
-}
-
-static void airprime_write_bulk_callback(struct urb *urb)
-{
-        struct usb_serial_port *port = urb->context;
-        struct airprime_private *priv = usb_get_serial_port_data(port);
-        int status = urb->status;
-        unsigned long flags;
-
-        dbg("%s - port %d", __func__, port->number);
-
-        /* free up the transfer buffer, as usb_free_urb() does not do this */
-        kfree(urb->transfer_buffer);
-
-        if (status)
-                dbg("%s - nonzero write bulk status received: %d",
-                    __func__, status);
-        spin_lock_irqsave(&priv->lock, flags);
-        --priv->outstanding_urbs;
-        spin_unlock_irqrestore(&priv->lock, flags);
-
-        usb_serial_port_softint(port);
-}
-
-static int airprime_open(struct usb_serial_port *port, struct file *filp)
-{
-        struct airprime_private *priv = usb_get_serial_port_data(port);
-        struct usb_serial *serial = port->serial;
-        struct urb *urb;
-        char *buffer = NULL;
-        int i;
-        int result = 0;
-
-        dbg("%s - port %d", __func__, port->number);
-
-        /* initialize our private data structure if it isn't already created */
-        if (!priv) {
-                priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-                if (!priv) {
-                        result = -ENOMEM;
-                        goto out;
-                }
-                spin_lock_init(&priv->lock);
-                usb_set_serial_port_data(port, priv);
-        }
-
-        /* Set some sane defaults */
-        priv->rts_state = 1;
-        priv->dtr_state = 1;
-
-        for (i = 0; i < NUM_READ_URBS; ++i) {
-                buffer = kmalloc(buffer_size, GFP_KERNEL);
-                if (!buffer) {
-                        dev_err(&port->dev, "%s - out of memory.\n",
-                                __func__);
-                        result = -ENOMEM;
-                        goto errout;
-                }
-                urb = usb_alloc_urb(0, GFP_KERNEL);
-                if (!urb) {
-                        kfree(buffer);
-                        dev_err(&port->dev, "%s - no more urbs?\n",
-                                __func__);
-                        result = -ENOMEM;
-                        goto errout;
-                }
-                usb_fill_bulk_urb(urb, serial->dev,
-                                  usb_rcvbulkpipe(serial->dev,
-                                          port->bulk_out_endpointAddress),
-                                  buffer, buffer_size,
-                                  airprime_read_bulk_callback, port);
-                result = usb_submit_urb(urb, GFP_KERNEL);
-                if (result) {
-                        usb_free_urb(urb);
-                        kfree(buffer);
-                        dev_err(&port->dev,
-                                "%s - failed submitting read urb %d for port %d, error %d\n",
-                                __func__, i, port->number, result);
-                        goto errout;
-                }
-                /* remember this urb so we can kill it when the
-                   port is closed */
-                priv->read_urbp[i] = urb;
-        }
-
-        airprime_send_setup(port);
-
-        goto out;
-
- errout:
-        /* some error happened, cancel any submitted urbs and clean up
-           anything that got allocated successfully */
-
-        while (i-- != 0) {
-                urb = priv->read_urbp[i];
-                buffer = urb->transfer_buffer;
-                usb_kill_urb(urb);
-                usb_free_urb(urb);
-                kfree(buffer);
-        }
-
- out:
-        return result;
-}
-
-static void airprime_close(struct usb_serial_port *port, struct file *filp)
-{
-        struct airprime_private *priv = usb_get_serial_port_data(port);
-        int i;
-
-        dbg("%s - port %d", __func__, port->number);
-
-        priv->rts_state = 0;
-        priv->dtr_state = 0;
-
-        mutex_lock(&port->serial->disc_mutex);
-        if (!port->serial->disconnected)
-                airprime_send_setup(port);
-        mutex_unlock(&port->serial->disc_mutex);
-
-        for (i = 0; i < NUM_READ_URBS; ++i) {
-                usb_kill_urb(priv->read_urbp[i]);
-                kfree(priv->read_urbp[i]->transfer_buffer);
-                usb_free_urb(priv->read_urbp[i]);
-        }
-
-        /* free up private structure */
-        kfree(priv);
-        usb_set_serial_port_data(port, NULL);
-}
-
-static int airprime_write(struct usb_serial_port *port,
-                          const unsigned char *buf, int count)
-{
-        struct airprime_private *priv = usb_get_serial_port_data(port);
-        struct usb_serial *serial = port->serial;
-        struct urb *urb;
-        unsigned char *buffer;
-        unsigned long flags;
-        int status;
-        dbg("%s - port %d", __func__, port->number);
-
-        spin_lock_irqsave(&priv->lock, flags);
-        if (priv->outstanding_urbs > NUM_WRITE_URBS) {
-                spin_unlock_irqrestore(&priv->lock, flags);
-                dbg("%s - write limit hit\n", __func__);
-                return 0;
-        }
-        spin_unlock_irqrestore(&priv->lock, flags);
-        buffer = kmalloc(count, GFP_ATOMIC);
-        if (!buffer) {
-                dev_err(&port->dev, "out of memory\n");
-                return -ENOMEM;
-        }
-        urb = usb_alloc_urb(0, GFP_ATOMIC);
-        if (!urb) {
-                dev_err(&port->dev, "no more free urbs\n");
-                kfree(buffer);
-                return -ENOMEM;
-        }
-        memcpy(buffer, buf, count);
-
-        usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
-
-        usb_fill_bulk_urb(urb, serial->dev,
-                          usb_sndbulkpipe(serial->dev,
-                                          port->bulk_out_endpointAddress),
-                          buffer, count,
-                          airprime_write_bulk_callback, port);
-
-        /* send it down the pipe */
-        status = usb_submit_urb(urb, GFP_ATOMIC);
-        if (status) {
-                dev_err(&port->dev,
-                        "%s - usb_submit_urb(write bulk) failed with status = %d\n",
-                        __func__, status);
-                count = status;
-                kfree(buffer);
-        } else {
-                spin_lock_irqsave(&priv->lock, flags);
-                ++priv->outstanding_urbs;
-                spin_unlock_irqrestore(&priv->lock, flags);
-        }
-        /* we are done with this urb, so let the host driver
-         * really free it when it is finished with it */
-        usb_free_urb(urb);
-        return count;
-}
-
-static struct usb_driver airprime_driver = {
-        .name =         "airprime",
-        .probe =        usb_serial_probe,
-        .disconnect =   usb_serial_disconnect,
-        .id_table =     id_table,
-        .no_dynamic_id =        1,
-};
-
-static struct usb_serial_driver airprime_device = {
-        .driver = {
-                .owner =        THIS_MODULE,
-                .name =         "airprime",
-        },
-        .usb_driver =           &airprime_driver,
-        .id_table =             id_table,
-        .open =                 airprime_open,
-        .close =                airprime_close,
-        .write =                airprime_write,
-};
-
-static int __init airprime_init(void)
-{
-        int retval;
-
-        airprime_device.num_ports = endpoints;
-        if (endpoints < 0 || endpoints >= MAX_BULK_EPS)
-                airprime_device.num_ports = NUM_BULK_EPS;
-
-        retval = usb_serial_register(&airprime_device);
-        if (retval)
-                return retval;
-        retval = usb_register(&airprime_driver);
-        if (retval)
-                usb_serial_deregister(&airprime_device);
-        return retval;
-}
-
-static void __exit airprime_exit(void)
-{
-        dbg("%s", __func__);
-
-        usb_deregister(&airprime_driver);
-        usb_serial_deregister(&airprime_device);
-}
-
-module_init(airprime_init);
-module_exit(airprime_exit);
-MODULE_LICENSE("GPL");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled");
-module_param(buffer_size, int, 0);
-MODULE_PARM_DESC(buffer_size,
-                "Size of the transfer buffers in bytes (default 4096)");
-module_param(endpoints, int, 0);
-MODULE_PARM_DESC(endpoints, "Number of bulk EPs to configure (default 3)");
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index a73420dd052a..1e936a1cbe0b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -173,6 +173,7 @@ static int  option_send_setup(struct usb_serial_port *port);
 #define DELL_VENDOR_ID                          0x413C
 
 #define KYOCERA_VENDOR_ID                       0x0c88
+#define KYOCERA_PRODUCT_KPC650                  0x17da
 #define KYOCERA_PRODUCT_KPC680                  0x180a
 
 #define ANYDATA_VENDOR_ID                       0x16d5
@@ -305,6 +306,7 @@ static struct usb_device_id option_ids[] = {
         { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
         { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
         { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
+        { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
         { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
         { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
         { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */