[PATCH] qla2xxx: remove /proc interface

Remove /proc support.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 0 insertions, 254 deletions

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 2b6104daacb0..84db911318c6 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -119,19 +119,6 @@ module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR);
 MODULE_PARM_DESC(ql2xloginretrycount,
                 "Specify an alternate value for the NVRAM login retry count.");
 
-/*
- * Proc structures and functions
- */
-struct info_str {
-        char    *buffer;
-        int     length;
-        off_t   offset;
-        int     pos;
-};
-
-static void copy_mem_info(struct info_str *, char *, int);
-static int copy_info(struct info_str *, char *, ...);
-
 static void qla2x00_free_device(scsi_qla_host_t *);
 
 static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
@@ -151,14 +138,9 @@ static int qla2xxx_eh_host_reset(struct scsi_cmnd *);
 static int qla2x00_loop_reset(scsi_qla_host_t *ha);
 static int qla2x00_device_reset(scsi_qla_host_t *, fc_port_t *);
 
-static int qla2x00_proc_info(struct Scsi_Host *, char *, char **,
-    off_t, int, int);
-
 static struct scsi_host_template qla2x00_driver_template = {
         .module                 = THIS_MODULE,
         .name                   = "qla2xxx",
-        .proc_name              = "qla2xxx",
-        .proc_info              = qla2x00_proc_info,
         .queuecommand           = qla2x00_queuecommand,
 
         .eh_abort_handler       = qla2xxx_eh_abort,
@@ -1020,7 +1002,6 @@ qla2xxx_slave_alloc(struct scsi_device *sdev)
                         found++;
                         break;
                 }
-                
         }
         if (!found)
                 return -ENXIO;
@@ -1484,241 +1465,6 @@ qla2x00_free_device(scsi_qla_host_t *ha)
         pci_disable_device(ha->pdev);
 }
 
-
-/*
- * The following support functions are adopted to handle
- * the re-entrant qla2x00_proc_info correctly.
- */
-static void
-copy_mem_info(struct info_str *info, char *data, int len)
-{
-        if (info->pos + len > info->offset + info->length)
-                len = info->offset + info->length - info->pos;
-
-        if (info->pos + len < info->offset) {
-                info->pos += len;
-                return;
-        }
- 
-        if (info->pos < info->offset) {
-                off_t partial;
- 
-                partial = info->offset - info->pos;
-                data += partial;
-                info->pos += partial;
-                len  -= partial;
-        }
- 
-        if (len > 0) {
-                memcpy(info->buffer, data, len);
-                info->pos += len;
-                info->buffer += len;
-        }
-}
-
-static int
-copy_info(struct info_str *info, char *fmt, ...)
-{
-        va_list args;
-        char buf[256];
-        int len;
- 
-        va_start(args, fmt);
-        len = vsprintf(buf, fmt, args);
-        va_end(args);
- 
-        copy_mem_info(info, buf, len);
-
-        return (len);
-}
-
-/*************************************************************************
-* qla2x00_proc_info
-*
-* Description:
-*   Return information to handle /proc support for the driver.
-*
-* inout : decides the direction of the dataflow and the meaning of the
-*         variables
-* buffer: If inout==0 data is being written to it else read from it
-*         (ptr to a page buffer)
-* *start: If inout==0 start of the valid data in the buffer
-* offset: If inout==0 starting offset from the beginning of all
-*         possible data to return.
-* length: If inout==0 max number of bytes to be written into the buffer
-*         else number of bytes in "buffer"
-* Returns:
-*         < 0:  error. errno value.
-*         >= 0: sizeof data returned.
-*************************************************************************/
-int
-qla2x00_proc_info(struct Scsi_Host *shost, char *buffer,
-    char **start, off_t offset, int length, int inout)
-{
-        struct info_str info;
-        int             retval = -EINVAL;
-        uint32_t        tmp_sn;
-        uint32_t        *flags;
-        uint8_t         *loop_state;
-        scsi_qla_host_t *ha;
-        char fw_info[30];
- 
-        DEBUG3(printk(KERN_INFO
-            "Entering proc_info buff_in=%p, offset=0x%lx, length=0x%x\n",
-            buffer, offset, length);)
-
-        ha = (scsi_qla_host_t *) shost->hostdata;
-
-        if (inout) {
-                /* Has data been written to the file? */
-                DEBUG3(printk(
-                    "%s: has data been written to the file. \n",
-                    __func__);)
-
-                return -ENOSYS;
-        }
-
-        if (start) {
-                *start = buffer;
-        }
-
-        info.buffer = buffer;
-        info.length = length;
-        info.offset = offset;
-        info.pos    = 0;
-
-        /* start building the print buffer */
-        copy_info(&info,
-            "QLogic PCI to Fibre Channel Host Adapter for %s:\n"
-            "        Firmware version %s, ",
-            ha->model_number, qla2x00_get_fw_version_str(ha, fw_info));
-
-        copy_info(&info, "Driver version %s\n", qla2x00_version_str);
-
-        tmp_sn = ((ha->serial0 & 0x1f) << 16) | (ha->serial2 << 8) | 
-            ha->serial1;
-        copy_info(&info, "ISP: %s, Serial# %c%05d\n",
-            ha->brd_info->isp_name, ('A' + tmp_sn/100000), (tmp_sn%100000));
-
-        copy_info(&info,
-            "Request Queue = 0x%llx, Response Queue = 0x%llx\n",
-                (unsigned long long)ha->request_dma,
-                (unsigned long long)ha->response_dma);
-
-        copy_info(&info,
-            "Request Queue count = %d, Response Queue count = %d\n",
-            ha->request_q_length, ha->response_q_length);
-
-        copy_info(&info,
-            "Total number of active commands = %ld\n",
-            ha->actthreads);
-
-        copy_info(&info,
-            "Total number of interrupts = %ld\n",
-            (long)ha->total_isr_cnt);
-
-        copy_info(&info,
-            "    Device queue depth = 0x%x\n",
-            (ql2xmaxqdepth == 0) ? 16 : ql2xmaxqdepth);
-
-        copy_info(&info,
-            "Number of free request entries = %d\n", ha->req_q_cnt);
-
-        copy_info(&info,
-            "Number of mailbox timeouts = %ld\n", ha->total_mbx_timeout);
-
-        copy_info(&info,
-            "Number of ISP aborts = %ld\n", ha->total_isp_aborts);
-
-        copy_info(&info,
-            "Number of loop resyncs = %ld\n", ha->total_loop_resync);
-
-        copy_info(&info,
-            "Number of retries for empty slots = %ld\n",
-            qla2x00_stats.outarray_full);
-
-        flags = (uint32_t *) &ha->flags;
-
-        if (atomic_read(&ha->loop_state) == LOOP_DOWN) {
-                loop_state = "DOWN";
-        } else if (atomic_read(&ha->loop_state) == LOOP_UP) {
-                loop_state = "UP";
-        } else if (atomic_read(&ha->loop_state) == LOOP_READY) {
-                loop_state = "READY";
-        } else if (atomic_read(&ha->loop_state) == LOOP_TIMEOUT) {
-                loop_state = "TIMEOUT";
-        } else if (atomic_read(&ha->loop_state) == LOOP_UPDATE) {
-                loop_state = "UPDATE";
-        } else {
-                loop_state = "UNKNOWN";
-        }
-
-        copy_info(&info, 
-            "Host adapter:loop state = <%s>, flags = 0x%lx\n",
-            loop_state , *flags);
-
-        copy_info(&info, "Dpc flags = 0x%lx\n", ha->dpc_flags);
-
-        copy_info(&info, "MBX flags = 0x%x\n", ha->mbx_flags);
-
-        copy_info(&info, "Link down Timeout = %3.3d\n",
-            ha->link_down_timeout);
-
-        copy_info(&info, "Port down retry = %3.3d\n",
-            ha->port_down_retry_count);
-
-        copy_info(&info, "Login retry count = %3.3d\n",
-            ha->login_retry_count);
-
-        copy_info(&info,
-            "Commands retried with dropped frame(s) = %d\n",
-            ha->dropped_frame_error_cnt);
-
-        copy_info(&info,
-            "Product ID = %04x %04x %04x %04x\n", ha->product_id[0],
-            ha->product_id[1], ha->product_id[2], ha->product_id[3]);
-
-        copy_info(&info, "\n");
-
-        /* 2.25 node/port display to proc */
-        /* Display the node name for adapter */
-        copy_info(&info, "\nSCSI Device Information:\n");
-        copy_info(&info,
-            "scsi-qla%d-adapter-node="
-            "%02x%02x%02x%02x%02x%02x%02x%02x;\n",
-            (int)ha->instance,
-            ha->init_cb->node_name[0],
-            ha->init_cb->node_name[1],
-            ha->init_cb->node_name[2],
-            ha->init_cb->node_name[3],
-            ha->init_cb->node_name[4],
-            ha->init_cb->node_name[5],
-            ha->init_cb->node_name[6],
-            ha->init_cb->node_name[7]);
-
-        /* display the port name for adapter */
-        copy_info(&info,
-            "scsi-qla%d-adapter-port="
-            "%02x%02x%02x%02x%02x%02x%02x%02x;\n",
-            (int)ha->instance,
-            ha->init_cb->port_name[0],
-            ha->init_cb->port_name[1],
-            ha->init_cb->port_name[2],
-            ha->init_cb->port_name[3],
-            ha->init_cb->port_name[4],
-            ha->init_cb->port_name[5],
-            ha->init_cb->port_name[6],
-            ha->init_cb->port_name[7]);
-
-        retval = info.pos > info.offset ? info.pos - info.offset : 0;
-
-        DEBUG3(printk(KERN_INFO 
-            "Exiting proc_info: info.pos=%d, offset=0x%lx, "
-            "length=0x%x\n", info.pos, offset, length);)
-
-        return (retval);
-}
-
 /*
  * qla2x00_mark_device_lost Updates fcport state when device goes offline.
  *