omap3: zoom: rename zoom2 name to generic zoom

Replace zoom2 with zoom name in board-zoom-peripherals.c file
and board-zoom-debugboard.c. Create mach/board-zoom.h.

This file has functions reused for boards: Zoom2/Zoom3/sdp3630.
Hence have all functions commonly named as zoom

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

4 files changed, 81 insertions, 78 deletions

diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index 91ecddc9057a..bb4018b60642 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -16,18 +16,18 @@
 
 #include <plat/gpmc.h>
 
-#define ZOOM2_SMSC911X_CS       7
-#define ZOOM2_SMSC911X_GPIO     158
-#define ZOOM2_QUADUART_CS       3
-#define ZOOM2_QUADUART_GPIO     102
+#define ZOOM_SMSC911X_CS        7
+#define ZOOM_SMSC911X_GPIO      158
+#define ZOOM_QUADUART_CS        3
+#define ZOOM_QUADUART_GPIO      102
 #define QUART_CLK               1843200
 #define DEBUG_BASE              0x08000000
-#define ZOOM2_ETHR_START        DEBUG_BASE
+#define ZOOM_ETHR_START DEBUG_BASE
 
-static struct resource zoom2_smsc911x_resources[] = {
+static struct resource zoom_smsc911x_resources[] = {
         [0] = {
-                .start  = ZOOM2_ETHR_START,
-                .end    = ZOOM2_ETHR_START + SZ_4K,
+                .start  = ZOOM_ETHR_START,
+                .end    = ZOOM_ETHR_START + SZ_4K,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
@@ -35,42 +35,42 @@ static struct resource zoom2_smsc911x_resources[] = {
         },
 };
 
-static struct smsc911x_platform_config zoom2_smsc911x_config = {
+static struct smsc911x_platform_config zoom_smsc911x_config = {
         .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
         .irq_type       = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
         .flags          = SMSC911X_USE_32BIT,
         .phy_interface  = PHY_INTERFACE_MODE_MII,
 };
 
-static struct platform_device zoom2_smsc911x_device = {
+static struct platform_device zoom_smsc911x_device = {
         .name           = "smsc911x",
         .id             = -1,
-        .num_resources  = ARRAY_SIZE(zoom2_smsc911x_resources),
-        .resource       = zoom2_smsc911x_resources,
+        .num_resources  = ARRAY_SIZE(zoom_smsc911x_resources),
+        .resource       = zoom_smsc911x_resources,
         .dev            = {
-                .platform_data = &zoom2_smsc911x_config,
+                .platform_data = &zoom_smsc911x_config,
         },
 };
 
-static inline void __init zoom2_init_smsc911x(void)
+static inline void __init zoom_init_smsc911x(void)
 {
         int eth_cs;
         unsigned long cs_mem_base;
         int eth_gpio = 0;
 
-        eth_cs = ZOOM2_SMSC911X_CS;
+        eth_cs = ZOOM_SMSC911X_CS;
 
         if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
                 printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
                 return;
         }
 
-        zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0;
-        zoom2_smsc911x_resources[0].end   = cs_mem_base + 0xff;
+        zoom_smsc911x_resources[0].start = cs_mem_base + 0x0;
+        zoom_smsc911x_resources[0].end   = cs_mem_base + 0xff;
 
-        eth_gpio = ZOOM2_SMSC911X_GPIO;
+        eth_gpio = ZOOM_SMSC911X_GPIO;
 
-        zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
+        zoom_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
 
         if (gpio_request(eth_gpio, "smsc911x irq") < 0) {
                 printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
@@ -94,7 +94,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
         }
 };
 
-static struct platform_device zoom2_debugboard_serial_device = {
+static struct platform_device zoom_debugboard_serial_device = {
         .name                   = "serial8250",
         .id                     = 3,
         .dev                    = {
@@ -102,13 +102,13 @@ static struct platform_device zoom2_debugboard_serial_device = {
         },
 };
 
-static inline void __init zoom2_init_quaduart(void)
+static inline void __init zoom_init_quaduart(void)
 {
         int quart_cs;
         unsigned long cs_mem_base;
         int quart_gpio = 0;
 
-        quart_cs = ZOOM2_QUADUART_CS;
+        quart_cs = ZOOM_QUADUART_CS;
 
         if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
                 printk(KERN_ERR "Failed to request GPMC mem"
@@ -116,7 +116,7 @@ static inline void __init zoom2_init_quaduart(void)
                 return;
         }
 
-        quart_gpio = ZOOM2_QUADUART_GPIO;
+        quart_gpio = ZOOM_QUADUART_GPIO;
 
         if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) {
                 printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
@@ -126,15 +126,15 @@ static inline void __init zoom2_init_quaduart(void)
         gpio_direction_input(quart_gpio);
 }
 
-static inline int omap_zoom2_debugboard_detect(void)
+static inline int omap_zoom_debugboard_detect(void)
 {
         int debug_board_detect = 0;
         int ret = 1;
 
-        debug_board_detect = ZOOM2_SMSC911X_GPIO;
+        debug_board_detect = ZOOM_SMSC911X_GPIO;
 
-        if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) {
-                printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug"
+        if (gpio_request(debug_board_detect, "Zoom debug board detect") < 0) {
+                printk(KERN_ERR "Failed to request GPIO%d for Zoom debug"
                 "board detect\n", debug_board_detect);
                 return 0;
         }
@@ -147,17 +147,17 @@ static inline int omap_zoom2_debugboard_detect(void)
         return ret;
 }
 
-static struct platform_device *zoom2_devices[] __initdata = {
-        &zoom2_smsc911x_device,
-        &zoom2_debugboard_serial_device,
+static struct platform_device *zoom_devices[] __initdata = {
+        &zoom_smsc911x_device,
+        &zoom_debugboard_serial_device,
 };
 
-int __init omap_zoom2_debugboard_init(void)
+int __init zoom_debugboard_init(void)
 {
-        if (!omap_zoom2_debugboard_detect())
+        if (!omap_zoom_debugboard_detect())
                 return 0;
 
-        zoom2_init_smsc911x();
-        zoom2_init_quaduart();
-        return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices));
+        zoom_init_smsc911x();
+        zoom_init_quaduart();
+        return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
 }
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 75cbbe747246..3535b7a73af7 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -86,27 +86,27 @@ static struct matrix_keymap_data board_map_data = {
         .keymap_size            = ARRAY_SIZE(board_keymap),
 };
 
-static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
+static struct twl4030_keypad_data zoom_kp_twl4030_data = {
         .keymap_data    = &board_map_data,
         .rows           = 8,
         .cols           = 8,
         .rep            = 1,
 };
 
-static struct regulator_consumer_supply zoom2_vmmc1_supply = {
+static struct regulator_consumer_supply zoom_vmmc1_supply = {
         .supply         = "vmmc",
 };
 
-static struct regulator_consumer_supply zoom2_vsim_supply = {
+static struct regulator_consumer_supply zoom_vsim_supply = {
         .supply         = "vmmc_aux",
 };
 
-static struct regulator_consumer_supply zoom2_vmmc2_supply = {
+static struct regulator_consumer_supply zoom_vmmc2_supply = {
         .supply         = "vmmc",
 };
 
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data zoom2_vmmc1 = {
+static struct regulator_init_data zoom_vmmc1 = {
         .constraints = {
                 .min_uV                 = 1850000,
                 .max_uV                 = 3150000,
@@ -117,11 +117,11 @@ static struct regulator_init_data zoom2_vmmc1 = {
                                         | REGULATOR_CHANGE_STATUS,
         },
         .num_consumer_supplies  = 1,
-        .consumer_supplies      = &zoom2_vmmc1_supply,
+        .consumer_supplies      = &zoom_vmmc1_supply,
 };
 
 /* VMMC2 for MMC2 card */
-static struct regulator_init_data zoom2_vmmc2 = {
+static struct regulator_init_data zoom_vmmc2 = {
         .constraints = {
                 .min_uV                 = 1850000,
                 .max_uV                 = 1850000,
@@ -132,11 +132,11 @@ static struct regulator_init_data zoom2_vmmc2 = {
                                         | REGULATOR_CHANGE_STATUS,
         },
         .num_consumer_supplies  = 1,
-        .consumer_supplies      = &zoom2_vmmc2_supply,
+        .consumer_supplies      = &zoom_vmmc2_supply,
 };
 
 /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data zoom2_vsim = {
+static struct regulator_init_data zoom_vsim = {
         .constraints = {
                 .min_uV                 = 1800000,
                 .max_uV                 = 3000000,
@@ -147,7 +147,7 @@ static struct regulator_init_data zoom2_vsim = {
                                         | REGULATOR_CHANGE_STATUS,
         },
         .num_consumer_supplies  = 1,
-        .consumer_supplies      = &zoom2_vsim_supply,
+        .consumer_supplies      = &zoom_vsim_supply,
 };
 
 static struct twl4030_hsmmc_info mmc[] __initdata = {
@@ -164,7 +164,7 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
         {}      /* Terminator */
 };
 
-static int zoom2_twl_gpio_setup(struct device *dev,
+static int zoom_twl_gpio_setup(struct device *dev,
                 unsigned gpio, unsigned ngpio)
 {
         /* gpio + 0 is "mmc0_cd" (input/IRQ),
@@ -177,15 +177,15 @@ static int zoom2_twl_gpio_setup(struct device *dev,
         /* link regulators to MMC adapters ... we "know" the
          * regulators will be set up only *after* we return.
         */
-        zoom2_vmmc1_supply.dev = mmc[0].dev;
-        zoom2_vsim_supply.dev = mmc[0].dev;
-        zoom2_vmmc2_supply.dev = mmc[1].dev;
+        zoom_vmmc1_supply.dev = mmc[0].dev;
+        zoom_vsim_supply.dev = mmc[0].dev;
+        zoom_vmmc2_supply.dev = mmc[1].dev;
 
         return 0;
 }
 
 
-static int zoom2_batt_table[] = {
+static int zoom_batt_table[] = {
 /* 0 C*/
 30800, 29500, 28300, 27100,
 26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
@@ -196,65 +196,64 @@ static int zoom2_batt_table[] = {
 4040,  3910,  3790,  3670,  3550
 };
 
-static struct twl4030_bci_platform_data zoom2_bci_data = {
-        .battery_tmp_tbl        = zoom2_batt_table,
-        .tblsize                = ARRAY_SIZE(zoom2_batt_table),
+static struct twl4030_bci_platform_data zoom_bci_data = {
+        .battery_tmp_tbl        = zoom_batt_table,
+        .tblsize                = ARRAY_SIZE(zoom_batt_table),
 };
 
-static struct twl4030_usb_data zoom2_usb_data = {
+static struct twl4030_usb_data zoom_usb_data = {
         .usb_mode       = T2_USB_MODE_ULPI,
 };
 
-static struct twl4030_gpio_platform_data zoom2_gpio_data = {
+static struct twl4030_gpio_platform_data zoom_gpio_data = {
         .gpio_base      = OMAP_MAX_GPIO_LINES,
         .irq_base       = TWL4030_GPIO_IRQ_BASE,
         .irq_end        = TWL4030_GPIO_IRQ_END,
-        .setup          = zoom2_twl_gpio_setup,
+        .setup          = zoom_twl_gpio_setup,
 };
 
-static struct twl4030_madc_platform_data zoom2_madc_data = {
+static struct twl4030_madc_platform_data zoom_madc_data = {
         .irq_line       = 1,
 };
 
-static struct twl4030_codec_audio_data zoom2_audio_data = {
+static struct twl4030_codec_audio_data zoom_audio_data = {
         .audio_mclk = 26000000,
 };
 
-static struct twl4030_codec_data zoom2_codec_data = {
+static struct twl4030_codec_data zoom_codec_data = {
         .audio_mclk = 26000000,
-        .audio = &zoom2_audio_data,
+        .audio = &zoom_audio_data,
 };
 
-static struct twl4030_platform_data zoom2_twldata = {
+static struct twl4030_platform_data zoom_twldata = {
         .irq_base       = TWL4030_IRQ_BASE,
         .irq_end        = TWL4030_IRQ_END,
 
         /* platform_data for children goes here */
-        .bci            = &zoom2_bci_data,
-        .madc           = &zoom2_madc_data,
-        .usb            = &zoom2_usb_data,
-        .gpio           = &zoom2_gpio_data,
-        .keypad         = &zoom2_kp_twl4030_data,
-        .codec          = &zoom2_codec_data,
-        .vmmc1          = &zoom2_vmmc1,
-        .vmmc2          = &zoom2_vmmc2,
-        .vsim           = &zoom2_vsim,
+        .bci            = &zoom_bci_data,
+        .madc           = &zoom_madc_data,
+        .usb            = &zoom_usb_data,
+        .gpio           = &zoom_gpio_data,
+        .keypad         = &zoom_kp_twl4030_data,
+        .codec          = &zoom_codec_data,
+        .vmmc2          = &zoom_vmmc2,
+        .vsim           = &zoom_vsim,
 
 };
 
-static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
+static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = {
         {
                 I2C_BOARD_INFO("twl4030", 0x48),
                 .flags          = I2C_CLIENT_WAKE,
                 .irq            = INT_34XX_SYS_NIRQ,
-                .platform_data  = &zoom2_twldata,
+                .platform_data  = &zoom_twldata,
         },
 };
 
 static int __init omap_i2c_init(void)
 {
-        omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
-                        ARRAY_SIZE(zoom2_i2c_boardinfo));
+        omap_register_i2c_bus(1, 2600, zoom_i2c_boardinfo,
+                        ARRAY_SIZE(zoom_i2c_boardinfo));
         omap_register_i2c_bus(2, 400, NULL, 0);
         omap_register_i2c_bus(3, 400, NULL, 0);
         return 0;
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 31d485b6859f..2f980e36ebfd 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -21,6 +21,8 @@
 #include <plat/common.h>
 #include <plat/board.h>
 
+#include <mach/board-zoom.h>
+
 #include "sdram-micron-mt46h32m32lf-6.h"
 
 static void __init omap_zoom2_init_irq(void)
@@ -56,13 +58,10 @@ static struct twl4030_platform_data zoom2_twldata = {
 
 #endif
 
-extern int __init omap_zoom2_debugboard_init(void);
-extern void __init zoom_peripherals_init(void);
-
 static void __init omap_zoom2_init(void)
 {
         zoom_peripherals_init();
-        omap_zoom2_debugboard_init();
+        zoom_debugboard_init();
 }
 
 static void __init omap_zoom2_map_io(void)
diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/include/mach/board-zoom.h
new file mode 100644
index 000000000000..c93b29e21b78
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/board-zoom.h
@@ -0,0 +1,5 @@
+/*
+ * Defines for zoom boards
+ */
+extern int __init zoom_debugboard_init(void);
+extern void __init zoom_peripherals_init(void);