Merge branch 'misc' into release

12 files changed, 20 insertions, 240 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index f2a2b8e647c5..2a3163e527fe 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -241,21 +241,6 @@ F:	drivers/pnp/pnpacpi/
 F:      include/linux/acpi.h
 F:      include/acpi/
 
-ACPI BATTERY DRIVERS
-M:      Alexey Starikovskiy <astarikovskiy@suse.de>
-L:      linux-acpi@vger.kernel.org
-W:      http://www.lesswatts.org/projects/acpi/
-S:      Supported
-F:      drivers/acpi/battery.c
-F:      drivers/acpi/*sbs*
-
-ACPI EC DRIVER
-M:      Alexey Starikovskiy <astarikovskiy@suse.de>
-L:      linux-acpi@vger.kernel.org
-W:      http://www.lesswatts.org/projects/acpi/
-S:      Supported
-F:      drivers/acpi/ec.c
-
 ACPI FAN DRIVER
 M:      Zhang Rui <rui.zhang@intel.com>
 L:      linux-acpi@vger.kernel.org
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 0f9de2b44c0c..3f3489c5ca8c 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -9,7 +9,6 @@ menuconfig ACPI
         depends on PCI
         depends on PM
         select PNP
-        select CPU_IDLE
         default y
         help
           Advanced Configuration and Power Interface (ACPI) support for 
@@ -200,6 +199,7 @@ config ACPI_DOCK
 config ACPI_PROCESSOR
         tristate "Processor"
         select THERMAL
+        select CPU_IDLE
         default y
         help
           This driver installs ACPI as the idle handler for Linux and uses
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 310e3b9749cb..d68bd61072bb 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -935,6 +935,12 @@ static int __init acpi_bus_init(void)
                 goto error1;
         }
 
+        /*
+         * _PDC control method may load dynamic SSDT tables,
+         * and we need to install the table handler before that.
+         */
+        acpi_sysfs_init();
+
         acpi_early_processor_set_pdc();
 
         /*
@@ -1026,7 +1032,6 @@ static int __init acpi_init(void)
         acpi_scan_init();
         acpi_ec_init();
         acpi_power_init();
-        acpi_sysfs_init();
         acpi_debugfs_init();
         acpi_sleep_proc_init();
         acpi_wakeup_device_init();
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index 44f99bd83741..81514a4918cc 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -930,7 +930,7 @@ static struct attribute_group dock_attribute_group = {
  * allocated and initialize a new dock station device.  Find all devices
  * that are on the dock station, and register for dock event notifications.
  */
-static int dock_add(acpi_handle handle)
+static int __init dock_add(acpi_handle handle)
 {
         int ret, id;
         struct dock_station ds, *dock_station;
@@ -1024,7 +1024,7 @@ static int dock_remove(struct dock_station *ds)
  *
  * This is called by acpi_walk_namespace to look for dock stations.
  */
-static acpi_status
+static __init acpi_status
 find_dock(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
         if (is_dock(handle))
@@ -1033,7 +1033,7 @@ find_dock(acpi_handle handle, u32 lvl, void *context, void **rv)
         return AE_OK;
 }
 
-static acpi_status
+static __init acpi_status
 find_bay(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
         /* If bay is a dock, it's already handled */
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 0c2e445410ab..966feddf6b1b 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -875,16 +875,6 @@ void acpi_os_wait_events_complete(void *context)
 EXPORT_SYMBOL(acpi_os_wait_events_complete);
 
 /*
- * Allocate the memory for a spinlock and initialize it.
- */
-acpi_status acpi_os_create_lock(acpi_spinlock * handle)
-{
-        spin_lock_init(*handle);
-
-        return AE_OK;
-}
-
-/*
  * Deallocate the memory for a spinlock.
  */
 void acpi_os_delete_lock(acpi_spinlock handle)
@@ -1265,21 +1255,6 @@ int acpi_check_region(resource_size_t start, resource_size_t n,
 }
 EXPORT_SYMBOL(acpi_check_region);
 
-int acpi_check_mem_region(resource_size_t start, resource_size_t n,
-                      const char *name)
-{
-        struct resource res = {
-                .start = start,
-                .end   = start + n - 1,
-                .name  = name,
-                .flags = IORESOURCE_MEM,
-        };
-
-        return acpi_check_resource_conflict(&res);
-
-}
-EXPORT_SYMBOL(acpi_check_mem_region);
-
 /*
  * Let drivers know whether the resource checks are effective
  */
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index 356c320bdd08..85e48047d7b0 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -917,6 +917,4 @@ static void __exit acpi_processor_exit(void)
 module_init(acpi_processor_init);
 module_exit(acpi_processor_exit);
 
-EXPORT_SYMBOL(acpi_processor_set_thermal_limit);
-
 MODULE_ALIAS("processor");
diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index 953b25fb9869..fde49b9b1d99 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c
@@ -44,47 +44,6 @@
 #define _COMPONENT              ACPI_PROCESSOR_COMPONENT
 ACPI_MODULE_NAME("processor_thermal");
 
-/* --------------------------------------------------------------------------
-                                 Limit Interface
-   -------------------------------------------------------------------------- */
-static int acpi_processor_apply_limit(struct acpi_processor *pr)
-{
-        int result = 0;
-        u16 px = 0;
-        u16 tx = 0;
-
-
-        if (!pr)
-                return -EINVAL;
-
-        if (!pr->flags.limit)
-                return -ENODEV;
-
-        if (pr->flags.throttling) {
-                if (pr->limit.user.tx > tx)
-                        tx = pr->limit.user.tx;
-                if (pr->limit.thermal.tx > tx)
-                        tx = pr->limit.thermal.tx;
-
-                result = acpi_processor_set_throttling(pr, tx, false);
-                if (result)
-                        goto end;
-        }
-
-        pr->limit.state.px = px;
-        pr->limit.state.tx = tx;
-
-        ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-                          "Processor [%d] limit set to (P%d:T%d)\n", pr->id,
-                          pr->limit.state.px, pr->limit.state.tx));
-
-      end:
-        if (result)
-                printk(KERN_ERR PREFIX "Unable to set limit\n");
-
-        return result;
-}
-
 #ifdef CONFIG_CPU_FREQ
 
 /* If a passive cooling situation is detected, primarily CPUfreq is used, as it
@@ -107,36 +66,6 @@ static int cpu_has_cpufreq(unsigned int cpu)
         return 1;
 }
 
-static int acpi_thermal_cpufreq_increase(unsigned int cpu)
-{
-        if (!cpu_has_cpufreq(cpu))
-                return -ENODEV;
-
-        if (per_cpu(cpufreq_thermal_reduction_pctg, cpu) <
-                CPUFREQ_THERMAL_MAX_STEP) {
-                per_cpu(cpufreq_thermal_reduction_pctg, cpu)++;
-                cpufreq_update_policy(cpu);
-                return 0;
-        }
-
-        return -ERANGE;
-}
-
-static int acpi_thermal_cpufreq_decrease(unsigned int cpu)
-{
-        if (!cpu_has_cpufreq(cpu))
-                return -ENODEV;
-
-        if (per_cpu(cpufreq_thermal_reduction_pctg, cpu) >
-                (CPUFREQ_THERMAL_MIN_STEP + 1))
-                per_cpu(cpufreq_thermal_reduction_pctg, cpu)--;
-        else
-                per_cpu(cpufreq_thermal_reduction_pctg, cpu) = 0;
-        cpufreq_update_policy(cpu);
-        /* We reached max freq again and can leave passive mode */
-        return !per_cpu(cpufreq_thermal_reduction_pctg, cpu);
-}
-
 static int acpi_thermal_cpufreq_notifier(struct notifier_block *nb,
                                          unsigned long event, void *data)
 {
@@ -238,113 +167,6 @@ static int acpi_thermal_cpufreq_decrease(unsigned int cpu)
 
 #endif
 
-int acpi_processor_set_thermal_limit(acpi_handle handle, int type)
-{
-        int result = 0;
-        struct acpi_processor *pr = NULL;
-        struct acpi_device *device = NULL;
-        int tx = 0, max_tx_px = 0;
-
-
-        if ((type < ACPI_PROCESSOR_LIMIT_NONE)
-            || (type > ACPI_PROCESSOR_LIMIT_DECREMENT))
-                return -EINVAL;
-
-        result = acpi_bus_get_device(handle, &device);
-        if (result)
-                return result;
-
-        pr = acpi_driver_data(device);
-        if (!pr)
-                return -ENODEV;
-
-        /* Thermal limits are always relative to the current Px/Tx state. */
-        if (pr->flags.throttling)
-                pr->limit.thermal.tx = pr->throttling.state;
-
-        /*
-         * Our default policy is to only use throttling at the lowest
-         * performance state.
-         */
-
-        tx = pr->limit.thermal.tx;
-
-        switch (type) {
-
-        case ACPI_PROCESSOR_LIMIT_NONE:
-                do {
-                        result = acpi_thermal_cpufreq_decrease(pr->id);
-                } while (!result);
-                tx = 0;
-                break;
-
-        case ACPI_PROCESSOR_LIMIT_INCREMENT:
-                /* if going up: P-states first, T-states later */
-
-                result = acpi_thermal_cpufreq_increase(pr->id);
-                if (!result)
-                        goto end;
-                else if (result == -ERANGE)
-                        ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-                                          "At maximum performance state\n"));
-
-                if (pr->flags.throttling) {
-                        if (tx == (pr->throttling.state_count - 1))
-                                ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-                                                  "At maximum throttling state\n"));
-                        else
-                                tx++;
-                }
-                break;
-
-        case ACPI_PROCESSOR_LIMIT_DECREMENT:
-                /* if going down: T-states first, P-states later */
-
-                if (pr->flags.throttling) {
-                        if (tx == 0) {
-                                max_tx_px = 1;
-                                ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-                                                  "At minimum throttling state\n"));
-                        } else {
-                                tx--;
-                                goto end;
-                        }
-                }
-
-                result = acpi_thermal_cpufreq_decrease(pr->id);
-                if (result) {
-                        /*
-                         * We only could get -ERANGE, 1 or 0.
-                         * In the first two cases we reached max freq again.
-                         */
-                        ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-                                          "At minimum performance state\n"));
-                        max_tx_px = 1;
-                } else
-                        max_tx_px = 0;
-
-                break;
-        }
-
-      end:
-        if (pr->flags.throttling) {
-                pr->limit.thermal.px = 0;
-                pr->limit.thermal.tx = tx;
-
-                result = acpi_processor_apply_limit(pr);
-                if (result)
-                        printk(KERN_ERR PREFIX "Unable to set thermal limit\n");
-
-                ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Thermal limit now (P%d:T%d)\n",
-                                  pr->limit.thermal.px, pr->limit.thermal.tx));
-        } else
-                result = 0;
-        if (max_tx_px)
-                return 1;
-        else
-                return result;
-}
-
 int acpi_processor_get_limit_info(struct acpi_processor *pr)
 {
 
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index e807f4196f89..721d93b3ceee 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -25,7 +25,7 @@
 #include "internal.h"
 #include "sleep.h"
 
-u8 sleep_states[ACPI_S_STATE_COUNT];
+static u8 sleep_states[ACPI_S_STATE_COUNT];
 
 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
 
@@ -419,6 +419,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
                 DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
                 },
         },
+        {
+        .callback = init_nvs_nosave,
+        .ident = "Sony Vaio VPCEB1Z1E",
+        .matches = {
+                DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+                DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
+                },
+        },
         {},
 };
 #endif /* CONFIG_SUSPEND */
@@ -706,7 +714,7 @@ static void acpi_power_off(void)
  * paths through the BIOS, so disable _GTS and _BFS by default,
  * but do speak up and offer the option to enable them.
  */
-void __init acpi_gts_bfs_check(void)
+static void __init acpi_gts_bfs_check(void)
 {
         acpi_handle dummy;
 
diff --git a/drivers/acpi/sleep.h b/drivers/acpi/sleep.h
index d8821805c3bc..74d59c8f4678 100644
--- a/drivers/acpi/sleep.h
+++ b/drivers/acpi/sleep.h
@@ -1,5 +1,4 @@
 
-extern u8 sleep_states[];
 extern int acpi_suspend(u32 state);
 
 extern void acpi_enable_wakeup_devices(u8 sleep_state);
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index 23d78b4d088b..3090471b2a5e 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -115,8 +115,6 @@ void pci_acpi_crs_quirks(void);
 #define ACPI_PROCESSOR_LIMIT_INCREMENT  0x01
 #define ACPI_PROCESSOR_LIMIT_DECREMENT  0x02
 
-int acpi_processor_set_thermal_limit(acpi_handle handle, int type);
-
 /*--------------------------------------------------------------------------
                                   Dock Station
   -------------------------------------------------------------------------- */
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
index 43027432a055..65b3f5888f42 100644
--- a/include/acpi/acpiosxf.h
+++ b/include/acpi/acpiosxf.h
@@ -98,8 +98,6 @@ acpi_os_table_override(struct acpi_table_header *existing_table,
 /*
  * Spinlock primitives
  */
-acpi_status acpi_os_create_lock(acpi_spinlock * out_handle);
-
 void acpi_os_delete_lock(acpi_spinlock handle);
 
 acpi_cpu_flags acpi_os_acquire_lock(acpi_spinlock handle);
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 7774e6d8fddd..050a7bccb836 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -245,8 +245,6 @@ int acpi_check_resource_conflict(const struct resource *res);
 
 int acpi_check_region(resource_size_t start, resource_size_t n,
                       const char *name);
-int acpi_check_mem_region(resource_size_t start, resource_size_t n,
-                      const char *name);
 
 int acpi_resources_are_enforced(void);
 
@@ -347,12 +345,6 @@ static inline int acpi_check_region(resource_size_t start, resource_size_t n,
         return 0;
 }
 
-static inline int acpi_check_mem_region(resource_size_t start,
-                                        resource_size_t n, const char *name)
-{
-        return 0;
-}
-
 struct acpi_table_header;
 static inline int acpi_table_parse(char *id,
                                 int (*handler)(struct acpi_table_header *))