[ETH]: indentation and cleanup

Run ethernet support through Lindent and fix up.
Applies after docbook comments patch

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 46 insertions, 50 deletions

diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index 72bdb15036ec..43863933f27f 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -78,39 +78,37 @@ __setup("ether=", netdev_boot_setup);
  * in here instead. It is up to the 802.2 layer to carry protocol information.
  */
 int eth_header(struct sk_buff *skb, struct net_device *dev, unsigned short type,
-           void *daddr, void *saddr, unsigned len)
+               void *daddr, void *saddr, unsigned len)
 {
-        struct ethhdr *eth = (struct ethhdr *)skb_push(skb,ETH_HLEN);
+        struct ethhdr *eth = (struct ethhdr *)skb_push(skb, ETH_HLEN);
 
-        if(type!=ETH_P_802_3) 
+        if (type != ETH_P_802_3)
                 eth->h_proto = htons(type);
         else
                 eth->h_proto = htons(len);
 
         /*
-         *      Set the source hardware address. 
+         *      Set the source hardware address.
          */
-         
-        if(!saddr)
+
+        if (!saddr)
                 saddr = dev->dev_addr;
-        memcpy(eth->h_source,saddr,dev->addr_len);
+        memcpy(eth->h_source, saddr, dev->addr_len);
 
-        if(daddr)
-        {
-                memcpy(eth->h_dest,daddr,dev->addr_len);
+        if (daddr) {
+                memcpy(eth->h_dest, daddr, dev->addr_len);
                 return ETH_HLEN;
         }
-        
+
         /*
-         *      Anyway, the loopback-device should never use this function... 
+         *      Anyway, the loopback-device should never use this function...
          */
 
-        if (dev->flags & (IFF_LOOPBACK|IFF_NOARP)) 
-        {
+        if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
                 memset(eth->h_dest, 0, dev->addr_len);
                 return ETH_HLEN;
         }
-        
+
         return -ETH_HLEN;
 }
 
@@ -129,17 +127,16 @@ int eth_rebuild_header(struct sk_buff *skb)
         struct ethhdr *eth = (struct ethhdr *)skb->data;
         struct net_device *dev = skb->dev;
 
-        switch (eth->h_proto)
-        {
+        switch (eth->h_proto) {
 #ifdef CONFIG_INET
         case __constant_htons(ETH_P_IP):
-                return arp_find(eth->h_dest, skb);
-#endif  
+                return arp_find(eth->h_dest, skb);
+#endif
         default:
                 printk(KERN_DEBUG
-                       "%s: unable to resolve type %X addresses.\n", 
+                       "%s: unable to resolve type %X addresses.\n",
                        dev->name, (int)eth->h_proto);
-                
+
                 memcpy(eth->h_source, dev->dev_addr, dev->addr_len);
                 break;
         }
@@ -147,7 +144,6 @@ int eth_rebuild_header(struct sk_buff *skb)
         return 0;
 }
 
-
 /**
  * eth_type_trans - determine the packet's protocol ID.
  * @skb: received socket data
@@ -161,50 +157,51 @@ __be16 eth_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
         struct ethhdr *eth;
         unsigned char *rawp;
-        
+
         skb->mac.raw = skb->data;
-        skb_pull(skb,ETH_HLEN);
+        skb_pull(skb, ETH_HLEN);
         eth = eth_hdr(skb);
-        
+
         if (is_multicast_ether_addr(eth->h_dest)) {
                 if (!compare_ether_addr(eth->h_dest, dev->broadcast))
                         skb->pkt_type = PACKET_BROADCAST;
                 else
                         skb->pkt_type = PACKET_MULTICAST;
         }
-        
+
         /*
-         *      This ALLMULTI check should be redundant by 1.4
-         *      so don't forget to remove it.
+         *      This ALLMULTI check should be redundant by 1.4
+         *      so don't forget to remove it.
          *
-         *      Seems, you forgot to remove it. All silly devices
-         *      seems to set IFF_PROMISC.
+         *      Seems, you forgot to remove it. All silly devices
+         *      seems to set IFF_PROMISC.
          */
-         
-        else if(1 /*dev->flags&IFF_PROMISC*/) {
+
+        else if (1 /*dev->flags&IFF_PROMISC */ ) {
                 if (unlikely(compare_ether_addr(eth->h_dest, dev->dev_addr)))
                         skb->pkt_type = PACKET_OTHERHOST;
         }
-        
+
         if (ntohs(eth->h_proto) >= 1536)
                 return eth->h_proto;
-                
+
         rawp = skb->data;
-        
+
         /*
-         *      This is a magic hack to spot IPX packets. Older Novell breaks
-         *      the protocol design and runs IPX over 802.3 without an 802.2 LLC
-         *      layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This
-         *      won't work for fault tolerant netware but does for the rest.
+         *      This is a magic hack to spot IPX packets. Older Novell breaks
+         *      the protocol design and runs IPX over 802.3 without an 802.2 LLC
+         *      layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This
+         *      won't work for fault tolerant netware but does for the rest.
          */
         if (*(unsigned short *)rawp == 0xFFFF)
                 return htons(ETH_P_802_3);
-                
+
         /*
-         *      Real 802.2 LLC
+         *      Real 802.2 LLC
          */
         return htons(ETH_P_802_2);
 }
+EXPORT_SYMBOL(eth_type_trans);
 
 /**
  * eth_header_parse - extract hardware address from packet
@@ -230,8 +227,8 @@ int eth_header_cache(struct neighbour *neigh, struct hh_cache *hh)
         struct ethhdr *eth;
         struct net_device *dev = neigh->dev;
 
-        eth = (struct ethhdr*)
-                (((u8*)hh->hh_data) + (HH_DATA_OFF(sizeof(*eth))));
+        eth = (struct ethhdr *)
+            (((u8 *) hh->hh_data) + (HH_DATA_OFF(sizeof(*eth))));
 
         if (type == __constant_htons(ETH_P_802_3))
                 return -1;
@@ -251,14 +248,13 @@ int eth_header_cache(struct neighbour *neigh, struct hh_cache *hh)
  *
  * Called by Address Resolution module to notify changes in address.
  */
-void eth_header_cache_update(struct hh_cache *hh, struct net_device *dev, unsigned char * haddr)
+void eth_header_cache_update(struct hh_cache *hh, struct net_device *dev,
+                             unsigned char *haddr)
 {
-        memcpy(((u8*)hh->hh_data) + HH_DATA_OFF(sizeof(struct ethhdr)),
+        memcpy(((u8 *) hh->hh_data) + HH_DATA_OFF(sizeof(struct ethhdr)),
                haddr, dev->addr_len);
 }
 
-EXPORT_SYMBOL(eth_type_trans);
-
 /**
  * eth_mac_addr - set new Ethernet hardware address
  * @dev: network device
@@ -270,10 +266,10 @@ EXPORT_SYMBOL(eth_type_trans);
  */
 static int eth_mac_addr(struct net_device *dev, void *p)
 {
-        struct sockaddr *addr=p;
+        struct sockaddr *addr = p;
         if (netif_running(dev))
                 return -EBUSY;
-        memcpy(dev->dev_addr, addr->sa_data,dev->addr_len);
+        memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
         return 0;
 }
 
@@ -315,7 +311,7 @@ void ether_setup(struct net_device *dev)
         dev->tx_queue_len       = 1000; /* Ethernet wants good queues */        
         dev->flags              = IFF_BROADCAST|IFF_MULTICAST;
         
-        memset(dev->broadcast,0xFF, ETH_ALEN);
+        memset(dev->broadcast, 0xFF, ETH_ALEN);
 
 }
 EXPORT_SYMBOL(ether_setup);