aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2010-03-04 11:24:06 -0500
committerLinus Torvalds <torvalds@linux-foundation.org>2010-03-04 11:24:06 -0500
commit4c10c937cc2eb197db565392db91d429eec71176 (patch)
tree02d7f15b314441e832f48f0f882882042361396c
parent9bb676966aa85e56af00b353387d3c274a26e480 (diff)
parent950f564b707ca1b1c5bb94cd1e7d2a0702bfcadc (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6: (49 commits) drivers/ide: Fix continuation line formats ide: fixed section mismatch warning in cmd640.c ide: ide_timing_compute() fixup ide: make ide_get_best_pio_mode() static via82cxxx: use ->pio_mode value to determine pair device speed tx493xide: use ->pio_mode value to determine pair device speed siimage: use ->pio_mode value to determine pair device speed palm_bk3710: use ->pio_mode value to determine pair device speed it821x: use ->pio_mode value to determine pair device speed cs5536: use ->pio_mode value to determine pair device speed cs5535: use ->pio_mode value to determine pair device speed cmd64x: fix handling of address setup timings amd74xx: use ->pio_mode value to determine pair device speed alim15x3: fix handling of UDMA enable bit alim15x3: fix handling of DMA timings alim15x3: fix handling of command timings alim15x3: fix handling of address setup timings ide-timings: use ->pio_mode value to determine fastest PIO speed ide: change ->set_dma_mode method parameters ide: change ->set_pio_mode method parameters ...
-rw-r--r--Documentation/cdrom/ide-cd39
-rw-r--r--drivers/ide/aec62xx.c13
-rw-r--r--drivers/ide/ali14xx.c3
-rw-r--r--drivers/ide/alim15x3.c171
-rw-r--r--drivers/ide/amd74xx.c18
-rw-r--r--drivers/ide/at91_ide.c5
-rw-r--r--drivers/ide/atiixp.c14
-rw-r--r--drivers/ide/au1xxx-ide.c13
-rw-r--r--drivers/ide/cmd640.c5
-rw-r--r--drivers/ide/cmd64x.c114
-rw-r--r--drivers/ide/cs5520.c9
-rw-r--r--drivers/ide/cs5530.c13
-rw-r--r--drivers/ide/cs5535.c14
-rw-r--r--drivers/ide/cs5536.c16
-rw-r--r--drivers/ide/cy82c693.c146
-rw-r--r--drivers/ide/dtc2278.c4
-rw-r--r--drivers/ide/hpt366.c9
-rw-r--r--drivers/ide/ht6560b.c3
-rw-r--r--drivers/ide/icside.c67
-rw-r--r--drivers/ide/ide-cs.c23
-rw-r--r--drivers/ide/ide-devsets.c6
-rw-r--r--drivers/ide/ide-iops.c2
-rw-r--r--drivers/ide/ide-probe.c2
-rw-r--r--drivers/ide/ide-tape.c14
-rw-r--r--drivers/ide/ide-timings.c18
-rw-r--r--drivers/ide/ide-xfer-mode.c18
-rw-r--r--drivers/ide/it8172.c14
-rw-r--r--drivers/ide/it8213.c20
-rw-r--r--drivers/ide/it821x.c14
-rw-r--r--drivers/ide/jmicron.c6
-rw-r--r--drivers/ide/opti621.c77
-rw-r--r--drivers/ide/palm_bk3710.c12
-rw-r--r--drivers/ide/pdc202xx_new.c8
-rw-r--r--drivers/ide/pdc202xx_old.c31
-rw-r--r--drivers/ide/piix.c20
-rw-r--r--drivers/ide/pmac.c13
-rw-r--r--drivers/ide/qd65xx.c10
-rw-r--r--drivers/ide/sc1200.c8
-rw-r--r--drivers/ide/scc_pata.c24
-rw-r--r--drivers/ide/serverworks.c50
-rw-r--r--drivers/ide/sgiioc4.c2
-rw-r--r--drivers/ide/siimage.c14
-rw-r--r--drivers/ide/sis5513.c8
-rw-r--r--drivers/ide/sl82c105.c8
-rw-r--r--drivers/ide/slc90e66.c17
-rw-r--r--drivers/ide/tc86c001.c9
-rw-r--r--drivers/ide/triflex.c10
-rw-r--r--drivers/ide/tx4938ide.c7
-rw-r--r--drivers/ide/tx4939ide.c10
-rw-r--r--drivers/ide/umc8672.c5
-rw-r--r--drivers/ide/via82cxxx.c132
-rw-r--r--include/linux/ide.h7
52 files changed, 617 insertions, 678 deletions
diff --git a/Documentation/cdrom/ide-cd b/Documentation/cdrom/ide-cd
index 2c558cd6c1ef..f4dc9de2694e 100644
--- a/Documentation/cdrom/ide-cd
+++ b/Documentation/cdrom/ide-cd
@@ -159,42 +159,7 @@ two arguments: the CDROM device, and the slot number to which you wish
159to change. If the slot number is -1, the drive is unloaded. 159to change. If the slot number is -1, the drive is unloaded.
160 160
161 161
1624. Compilation options 1624. Common problems
163----------------------
164
165There are a few additional options which can be set when compiling the
166driver. Most people should not need to mess with any of these; they
167are listed here simply for completeness. A compilation option can be
168enabled by adding a line of the form `#define <option> 1' to the top
169of ide-cd.c. All these options are disabled by default.
170
171VERBOSE_IDE_CD_ERRORS
172 If this is set, ATAPI error codes will be translated into textual
173 descriptions. In addition, a dump is made of the command which
174 provoked the error. This is off by default to save the memory used
175 by the (somewhat long) table of error descriptions.
176
177STANDARD_ATAPI
178 If this is set, the code needed to deal with certain drives which do
179 not properly implement the ATAPI spec will be disabled. If you know
180 your drive implements ATAPI properly, you can turn this on to get a
181 slightly smaller kernel.
182
183NO_DOOR_LOCKING
184 If this is set, the driver will never attempt to lock the door of
185 the drive.
186
187CDROM_NBLOCKS_BUFFER
188 This sets the size of the buffer to be used for a CDROMREADAUDIO
189 ioctl. The default is 8.
190
191TEST
192 This currently enables an additional ioctl which enables a user-mode
193 program to execute an arbitrary packet command. See the source for
194 details. This should be left off unless you know what you're doing.
195
196
1975. Common problems
198------------------ 163------------------
199 164
200This section discusses some common problems encountered when trying to 165This section discusses some common problems encountered when trying to
@@ -371,7 +336,7 @@ f. Data corruption.
371 expense of low system performance. 336 expense of low system performance.
372 337
373 338
3746. cdchange.c 3395. cdchange.c
375------------- 340-------------
376 341
377/* 342/*
diff --git a/drivers/ide/aec62xx.c b/drivers/ide/aec62xx.c
index 878f8ec6dbe1..57d00caefc86 100644
--- a/drivers/ide/aec62xx.c
+++ b/drivers/ide/aec62xx.c
@@ -81,15 +81,15 @@ static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entr
81 return chipset_table->ultra_settings; 81 return chipset_table->ultra_settings;
82} 82}
83 83
84static void aec6210_set_mode(ide_drive_t *drive, const u8 speed) 84static void aec6210_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
85{ 85{
86 ide_hwif_t *hwif = drive->hwif;
87 struct pci_dev *dev = to_pci_dev(hwif->dev); 86 struct pci_dev *dev = to_pci_dev(hwif->dev);
88 struct ide_host *host = pci_get_drvdata(dev); 87 struct ide_host *host = pci_get_drvdata(dev);
89 struct chipset_bus_clock_list_entry *bus_clock = host->host_priv; 88 struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
90 u16 d_conf = 0; 89 u16 d_conf = 0;
91 u8 ultra = 0, ultra_conf = 0; 90 u8 ultra = 0, ultra_conf = 0;
92 u8 tmp0 = 0, tmp1 = 0, tmp2 = 0; 91 u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
92 const u8 speed = drive->dma_mode;
93 unsigned long flags; 93 unsigned long flags;
94 94
95 local_irq_save(flags); 95 local_irq_save(flags);
@@ -109,15 +109,15 @@ static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
109 local_irq_restore(flags); 109 local_irq_restore(flags);
110} 110}
111 111
112static void aec6260_set_mode(ide_drive_t *drive, const u8 speed) 112static void aec6260_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
113{ 113{
114 ide_hwif_t *hwif = drive->hwif;
115 struct pci_dev *dev = to_pci_dev(hwif->dev); 114 struct pci_dev *dev = to_pci_dev(hwif->dev);
116 struct ide_host *host = pci_get_drvdata(dev); 115 struct ide_host *host = pci_get_drvdata(dev);
117 struct chipset_bus_clock_list_entry *bus_clock = host->host_priv; 116 struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
118 u8 unit = drive->dn & 1; 117 u8 unit = drive->dn & 1;
119 u8 tmp1 = 0, tmp2 = 0; 118 u8 tmp1 = 0, tmp2 = 0;
120 u8 ultra = 0, drive_conf = 0, ultra_conf = 0; 119 u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
120 const u8 speed = drive->dma_mode;
121 unsigned long flags; 121 unsigned long flags;
122 122
123 local_irq_save(flags); 123 local_irq_save(flags);
@@ -134,9 +134,10 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
134 local_irq_restore(flags); 134 local_irq_restore(flags);
135} 135}
136 136
137static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio) 137static void aec_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
138{ 138{
139 drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0); 139 drive->dma_mode = drive->pio_mode;
140 hwif->port_ops->set_dma_mode(hwif, drive);
140} 141}
141 142
142static int init_chipset_aec62xx(struct pci_dev *dev) 143static int init_chipset_aec62xx(struct pci_dev *dev)
diff --git a/drivers/ide/ali14xx.c b/drivers/ide/ali14xx.c
index 90da1f953ed0..25b9fe3a9f8e 100644
--- a/drivers/ide/ali14xx.c
+++ b/drivers/ide/ali14xx.c
@@ -109,13 +109,14 @@ static DEFINE_SPINLOCK(ali14xx_lock);
109 * This function computes timing parameters 109 * This function computes timing parameters
110 * and sets controller registers accordingly. 110 * and sets controller registers accordingly.
111 */ 111 */
112static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio) 112static void ali14xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
113{ 113{
114 int driveNum; 114 int driveNum;
115 int time1, time2; 115 int time1, time2;
116 u8 param1, param2, param3, param4; 116 u8 param1, param2, param3, param4;
117 unsigned long flags; 117 unsigned long flags;
118 int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; 118 int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
119 const u8 pio = drive->pio_mode - XFER_PIO_0;
119 struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); 120 struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
120 121
121 /* calculate timing, according to PIO mode */ 122 /* calculate timing, according to PIO mode */
diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index 0abc43f3101e..2c8016ad0e26 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -8,7 +8,7 @@
8 * Copyright (C) 2002 Alan Cox 8 * Copyright (C) 2002 Alan Cox
9 * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw> 9 * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw>
10 * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com> 10 * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
11 * Copyright (C) 2007 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 11 * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz
12 * 12 *
13 * (U)DMA capable version of ali 1533/1543(C), 1535(D) 13 * (U)DMA capable version of ali 1533/1543(C), 1535(D)
14 * 14 *
@@ -48,61 +48,84 @@ static u8 m5229_revision;
48static u8 chip_is_1543c_e; 48static u8 chip_is_1543c_e;
49static struct pci_dev *isa_dev; 49static struct pci_dev *isa_dev;
50 50
51static void ali_fifo_control(ide_hwif_t *hwif, ide_drive_t *drive, int on)
52{
53 struct pci_dev *pdev = to_pci_dev(hwif->dev);
54 int pio_fifo = 0x54 + hwif->channel;
55 u8 fifo;
56 int shift = 4 * (drive->dn & 1);
57
58 pci_read_config_byte(pdev, pio_fifo, &fifo);
59 fifo &= ~(0x0F << shift);
60 fifo |= (on << shift);
61 pci_write_config_byte(pdev, pio_fifo, fifo);
62}
63
64static void ali_program_timings(ide_hwif_t *hwif, ide_drive_t *drive,
65 struct ide_timing *t, u8 ultra)
66{
67 struct pci_dev *dev = to_pci_dev(hwif->dev);
68 int port = hwif->channel ? 0x5c : 0x58;
69 int udmat = 0x56 + hwif->channel;
70 u8 unit = drive->dn & 1, udma;
71 int shift = 4 * unit;
72
73 /* Set up the UDMA */
74 pci_read_config_byte(dev, udmat, &udma);
75 udma &= ~(0x0F << shift);
76 udma |= ultra << shift;
77 pci_write_config_byte(dev, udmat, udma);
78
79 if (t == NULL)
80 return;
81
82 t->setup = clamp_val(t->setup, 1, 8) & 7;
83 t->act8b = clamp_val(t->act8b, 1, 8) & 7;
84 t->rec8b = clamp_val(t->rec8b, 1, 16) & 15;
85 t->active = clamp_val(t->active, 1, 8) & 7;
86 t->recover = clamp_val(t->recover, 1, 16) & 15;
87
88 pci_write_config_byte(dev, port, t->setup);
89 pci_write_config_byte(dev, port + 1, (t->act8b << 4) | t->rec8b);
90 pci_write_config_byte(dev, port + unit + 2,
91 (t->active << 4) | t->recover);
92}
93
51/** 94/**
52 * ali_set_pio_mode - set host controller for PIO mode 95 * ali_set_pio_mode - set host controller for PIO mode
96 * @hwif: port
53 * @drive: drive 97 * @drive: drive
54 * @pio: PIO mode number
55 * 98 *
56 * Program the controller for the given PIO mode. 99 * Program the controller for the given PIO mode.
57 */ 100 */
58 101
59static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) 102static void ali_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
60{ 103{
61 ide_hwif_t *hwif = drive->hwif; 104 ide_drive_t *pair = ide_get_pair_dev(drive);
62 struct pci_dev *dev = to_pci_dev(hwif->dev);
63 struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
64 int s_time = t->setup, a_time = t->active, c_time = t->cycle;
65 u8 s_clc, a_clc, r_clc;
66 unsigned long flags;
67 int bus_speed = ide_pci_clk ? ide_pci_clk : 33; 105 int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
68 int port = hwif->channel ? 0x5c : 0x58; 106 unsigned long T = 1000000 / bus_speed; /* PCI clock based */
69 int portFIFO = hwif->channel ? 0x55 : 0x54; 107 struct ide_timing t;
70 u8 cd_dma_fifo = 0, unit = drive->dn & 1; 108
71 109 ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
72 if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8) 110 if (pair) {
73 s_clc = 0; 111 struct ide_timing p;
74 if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8) 112
75 a_clc = 0; 113 ide_timing_compute(pair, pair->pio_mode, &p, T, 1);
76 114 ide_timing_merge(&p, &t, &t,
77 if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) { 115 IDE_TIMING_SETUP | IDE_TIMING_8BIT);
78 r_clc = 1; 116 if (pair->dma_mode) {
79 } else { 117 ide_timing_compute(pair, pair->dma_mode, &p, T, 1);
80 if (r_clc >= 16) 118 ide_timing_merge(&p, &t, &t,
81 r_clc = 0; 119 IDE_TIMING_SETUP | IDE_TIMING_8BIT);
120 }
82 } 121 }
83 local_irq_save(flags); 122
84
85 /* 123 /*
86 * PIO mode => ATA FIFO on, ATAPI FIFO off 124 * PIO mode => ATA FIFO on, ATAPI FIFO off
87 */ 125 */
88 pci_read_config_byte(dev, portFIFO, &cd_dma_fifo); 126 ali_fifo_control(hwif, drive, (drive->media == ide_disk) ? 0x05 : 0x00);
89 if (drive->media==ide_disk) { 127
90 if (unit) { 128 ali_program_timings(hwif, drive, &t, 0);
91 pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0x0F) | 0x50);
92 } else {
93 pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0xF0) | 0x05);
94 }
95 } else {
96 if (unit) {
97 pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0x0F);
98 } else {
99 pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0xF0);
100 }
101 }
102
103 pci_write_config_byte(dev, port, s_clc);
104 pci_write_config_byte(dev, port + unit + 2, (a_clc << 4) | r_clc);
105 local_irq_restore(flags);
106} 129}
107 130
108/** 131/**
@@ -132,44 +155,42 @@ static u8 ali_udma_filter(ide_drive_t *drive)
132 155
133/** 156/**
134 * ali_set_dma_mode - set host controller for DMA mode 157 * ali_set_dma_mode - set host controller for DMA mode
158 * @hwif: port
135 * @drive: drive 159 * @drive: drive
136 * @speed: DMA mode
137 * 160 *
138 * Configure the hardware for the desired IDE transfer mode. 161 * Configure the hardware for the desired IDE transfer mode.
139 */ 162 */
140 163
141static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed) 164static void ali_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
142{ 165{
143 ide_hwif_t *hwif = drive->hwif; 166 static u8 udma_timing[7] = { 0xC, 0xB, 0xA, 0x9, 0x8, 0xF, 0xD };
144 struct pci_dev *dev = to_pci_dev(hwif->dev); 167 struct pci_dev *dev = to_pci_dev(hwif->dev);
145 u8 speed1 = speed; 168 ide_drive_t *pair = ide_get_pair_dev(drive);
146 u8 unit = drive->dn & 1; 169 int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
170 unsigned long T = 1000000 / bus_speed; /* PCI clock based */
171 const u8 speed = drive->dma_mode;
147 u8 tmpbyte = 0x00; 172 u8 tmpbyte = 0x00;
148 int m5229_udma = (hwif->channel) ? 0x57 : 0x56; 173 struct ide_timing t;
149
150 if (speed == XFER_UDMA_6)
151 speed1 = 0x47;
152 174
153 if (speed < XFER_UDMA_0) { 175 if (speed < XFER_UDMA_0) {
154 u8 ultra_enable = (unit) ? 0x7f : 0xf7; 176 ide_timing_compute(drive, drive->dma_mode, &t, T, 1);
155 /* 177 if (pair) {
156 * clear "ultra enable" bit 178 struct ide_timing p;
157 */ 179
158 pci_read_config_byte(dev, m5229_udma, &tmpbyte); 180 ide_timing_compute(pair, pair->pio_mode, &p, T, 1);
159 tmpbyte &= ultra_enable; 181 ide_timing_merge(&p, &t, &t,
160 pci_write_config_byte(dev, m5229_udma, tmpbyte); 182 IDE_TIMING_SETUP | IDE_TIMING_8BIT);
161 183 if (pair->dma_mode) {
162 /* 184 ide_timing_compute(pair, pair->dma_mode,
163 * FIXME: Oh, my... DMA timings are never set. 185 &p, T, 1);
164 */ 186 ide_timing_merge(&p, &t, &t,
187 IDE_TIMING_SETUP | IDE_TIMING_8BIT);
188 }
189 }
190 ali_program_timings(hwif, drive, &t, 0);
165 } else { 191 } else {
166 pci_read_config_byte(dev, m5229_udma, &tmpbyte); 192 ali_program_timings(hwif, drive, NULL,
167 tmpbyte &= (0x0f << ((1-unit) << 2)); 193 udma_timing[speed - XFER_UDMA_0]);
168 /*
169 * enable ultra dma and set timing
170 */
171 tmpbyte |= ((0x08 | ((4-speed1)&0x07)) << (unit << 2));
172 pci_write_config_byte(dev, m5229_udma, tmpbyte);
173 if (speed >= XFER_UDMA_3) { 194 if (speed >= XFER_UDMA_3) {
174 pci_read_config_byte(dev, 0x4b, &tmpbyte); 195 pci_read_config_byte(dev, 0x4b, &tmpbyte);
175 tmpbyte |= 1; 196 tmpbyte |= 1;
@@ -355,19 +376,13 @@ static int ali_cable_override(struct pci_dev *pdev)
355 * 376 *
356 * This checks if the controller and the cable are capable 377 * This checks if the controller and the cable are capable
357 * of UDMA66 transfers. It doesn't check the drives. 378 * of UDMA66 transfers. It doesn't check the drives.
358 * But see note 2 below!
359 *
360 * FIXME: frobs bits that are not defined on newer ALi devicea
361 */ 379 */
362 380
363static u8 ali_cable_detect(ide_hwif_t *hwif) 381static u8 ali_cable_detect(ide_hwif_t *hwif)
364{ 382{
365 struct pci_dev *dev = to_pci_dev(hwif->dev); 383 struct pci_dev *dev = to_pci_dev(hwif->dev);
366 unsigned long flags;
367 u8 cbl = ATA_CBL_PATA40, tmpbyte; 384 u8 cbl = ATA_CBL_PATA40, tmpbyte;
368 385
369 local_irq_save(flags);
370
371 if (m5229_revision >= 0xC2) { 386 if (m5229_revision >= 0xC2) {
372 /* 387 /*
373 * m5229 80-pin cable detection (from Host View) 388 * m5229 80-pin cable detection (from Host View)
@@ -387,8 +402,6 @@ static u8 ali_cable_detect(ide_hwif_t *hwif)
387 } 402 }
388 } 403 }
389 404
390 local_irq_restore(flags);
391
392 return cbl; 405 return cbl;
393} 406}
394 407
@@ -584,6 +597,6 @@ static void __exit ali15x3_ide_exit(void)
584module_init(ali15x3_ide_init); 597module_init(ali15x3_ide_init);
585module_exit(ali15x3_ide_exit); 598module_exit(ali15x3_ide_exit);
586 599
587MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox"); 600MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox, Bartlomiej Zolnierkiewicz");
588MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE"); 601MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE");
589MODULE_LICENSE("GPL"); 602MODULE_LICENSE("GPL");
diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c
index 628cd2e5fed8..3747b2561f09 100644
--- a/drivers/ide/amd74xx.c
+++ b/drivers/ide/amd74xx.c
@@ -3,7 +3,7 @@
3 * IDE driver for Linux. 3 * IDE driver for Linux.
4 * 4 *
5 * Copyright (c) 2000-2002 Vojtech Pavlik 5 * Copyright (c) 2000-2002 Vojtech Pavlik
6 * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz 6 * Copyright (c) 2007-2010 Bartlomiej Zolnierkiewicz
7 * 7 *
8 * Based on the work of: 8 * Based on the work of:
9 * Andre Hedrick 9 * Andre Hedrick
@@ -70,7 +70,8 @@ static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask,
70 default: return; 70 default: return;
71 } 71 }
72 72
73 pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + (3 - dn), t); 73 if (timing->udma)
74 pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + 3 - dn, t);
74} 75}
75 76
76/* 77/*
@@ -78,14 +79,14 @@ static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask,
78 * to a desired transfer mode. It also can be called by upper layers. 79 * to a desired transfer mode. It also can be called by upper layers.
79 */ 80 */
80 81
81static void amd_set_drive(ide_drive_t *drive, const u8 speed) 82static void amd_set_drive(ide_hwif_t *hwif, ide_drive_t *drive)
82{ 83{
83 ide_hwif_t *hwif = drive->hwif;
84 struct pci_dev *dev = to_pci_dev(hwif->dev); 84 struct pci_dev *dev = to_pci_dev(hwif->dev);
85 ide_drive_t *peer = ide_get_pair_dev(drive); 85 ide_drive_t *peer = ide_get_pair_dev(drive);
86 struct ide_timing t, p; 86 struct ide_timing t, p;
87 int T, UT; 87 int T, UT;
88 u8 udma_mask = hwif->ultra_mask; 88 u8 udma_mask = hwif->ultra_mask;
89 const u8 speed = drive->dma_mode;
89 90
90 T = 1000000000 / amd_clock; 91 T = 1000000000 / amd_clock;
91 UT = (udma_mask == ATA_UDMA2) ? T : (T / 2); 92 UT = (udma_mask == ATA_UDMA2) ? T : (T / 2);
@@ -93,7 +94,7 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed)
93 ide_timing_compute(drive, speed, &t, T, UT); 94 ide_timing_compute(drive, speed, &t, T, UT);
94 95
95 if (peer) { 96 if (peer) {
96 ide_timing_compute(peer, peer->current_speed, &p, T, UT); 97 ide_timing_compute(peer, peer->pio_mode, &p, T, UT);
97 ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); 98 ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
98 } 99 }
99 100
@@ -107,9 +108,10 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed)
107 * amd_set_pio_mode() is a callback from upper layers for PIO-only tuning. 108 * amd_set_pio_mode() is a callback from upper layers for PIO-only tuning.
108 */ 109 */
109 110
110static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio) 111static void amd_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
111{ 112{
112 amd_set_drive(drive, XFER_PIO_0 + pio); 113 drive->dma_mode = drive->pio_mode;
114 amd_set_drive(hwif, drive);
113} 115}
114 116
115static void amd7409_cable_detect(struct pci_dev *dev) 117static void amd7409_cable_detect(struct pci_dev *dev)
@@ -340,6 +342,6 @@ static void __exit amd74xx_ide_exit(void)
340module_init(amd74xx_ide_init); 342module_init(amd74xx_ide_init);
341module_exit(amd74xx_ide_exit); 343module_exit(amd74xx_ide_exit);
342 344
343MODULE_AUTHOR("Vojtech Pavlik"); 345MODULE_AUTHOR("Vojtech Pavlik, Bartlomiej Zolnierkiewicz");
344MODULE_DESCRIPTION("AMD PCI IDE driver"); 346MODULE_DESCRIPTION("AMD PCI IDE driver");
345MODULE_LICENSE("GPL"); 347MODULE_LICENSE("GPL");
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
index 248219a89a68..000a78e5246c 100644
--- a/drivers/ide/at91_ide.c
+++ b/drivers/ide/at91_ide.c
@@ -172,11 +172,12 @@ static void at91_ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
172 leave_16bit(chipselect, mode); 172 leave_16bit(chipselect, mode);
173} 173}
174 174
175static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) 175static void at91_ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
176{ 176{
177 struct ide_timing *timing; 177 struct ide_timing *timing;
178 u8 chipselect = drive->hwif->select_data; 178 u8 chipselect = hwif->select_data;
179 int use_iordy = 0; 179 int use_iordy = 0;
180 const u8 pio = drive->pio_mode - XFER_PIO_0;
180 181
181 pdbg("chipselect %u pio %u\n", chipselect, pio); 182 pdbg("chipselect %u pio %u\n", chipselect, pio);
182 183
diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c
index 837322b10a4c..15f0ead89f5c 100644
--- a/drivers/ide/atiixp.c
+++ b/drivers/ide/atiixp.c
@@ -42,19 +42,20 @@ static DEFINE_SPINLOCK(atiixp_lock);
42 42
43/** 43/**
44 * atiixp_set_pio_mode - set host controller for PIO mode 44 * atiixp_set_pio_mode - set host controller for PIO mode
45 * @hwif: port
45 * @drive: drive 46 * @drive: drive
46 * @pio: PIO mode number
47 * 47 *
48 * Set the interface PIO mode. 48 * Set the interface PIO mode.
49 */ 49 */
50 50
51static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio) 51static void atiixp_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
52{ 52{
53 struct pci_dev *dev = to_pci_dev(drive->hwif->dev); 53 struct pci_dev *dev = to_pci_dev(hwif->dev);
54 unsigned long flags; 54 unsigned long flags;
55 int timing_shift = (drive->dn ^ 1) * 8; 55 int timing_shift = (drive->dn ^ 1) * 8;
56 u32 pio_timing_data; 56 u32 pio_timing_data;
57 u16 pio_mode_data; 57 u16 pio_mode_data;
58 const u8 pio = drive->pio_mode - XFER_PIO_0;
58 59
59 spin_lock_irqsave(&atiixp_lock, flags); 60 spin_lock_irqsave(&atiixp_lock, flags);
60 61
@@ -74,21 +75,22 @@ static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio)
74 75
75/** 76/**
76 * atiixp_set_dma_mode - set host controller for DMA mode 77 * atiixp_set_dma_mode - set host controller for DMA mode
78 * @hwif: port
77 * @drive: drive 79 * @drive: drive
78 * @speed: DMA mode
79 * 80 *
80 * Set a ATIIXP host controller to the desired DMA mode. This involves 81 * Set a ATIIXP host controller to the desired DMA mode. This involves
81 * programming the right timing data into the PCI configuration space. 82 * programming the right timing data into the PCI configuration space.
82 */ 83 */
83 84
84static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed) 85static void atiixp_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
85{ 86{
86 struct pci_dev *dev = to_pci_dev(drive->hwif->dev); 87 struct pci_dev *dev = to_pci_dev(hwif->dev);
87 unsigned long flags; 88 unsigned long flags;
88 int timing_shift = (drive->dn ^ 1) * 8; 89 int timing_shift = (drive->dn ^ 1) * 8;
89 u32 tmp32; 90 u32 tmp32;
90 u16 tmp16; 91 u16 tmp16;
91 u16 udma_ctl = 0; 92 u16 udma_ctl = 0;
93 const u8 speed = drive->dma_mode;
92 94
93 spin_lock_irqsave(&atiixp_lock, flags); 95 spin_lock_irqsave(&atiixp_lock, flags);
94 96
diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
index 349a67bf1a36..b26c23416fa7 100644
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -99,12 +99,11 @@ static void au1xxx_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
99} 99}
100#endif 100#endif
101 101
102static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio) 102static void au1xxx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
103{ 103{
104 int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2); 104 int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
105 105
106 /* set pio mode! */ 106 switch (drive->pio_mode - XFER_PIO_0) {
107 switch(pio) {
108 case 0: 107 case 0:
109 mem_sttime = SBC_IDE_TIMING(PIO0); 108 mem_sttime = SBC_IDE_TIMING(PIO0);
110 109
@@ -161,11 +160,11 @@ static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio)
161 au_writel(mem_stcfg,MEM_STCFG2); 160 au_writel(mem_stcfg,MEM_STCFG2);
162} 161}
163 162
164static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed) 163static void auide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
165{ 164{
166 int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2); 165 int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
167 166
168 switch(speed) { 167 switch (drive->dma_mode) {
169#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA 168#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
170 case XFER_MW_DMA_2: 169 case XFER_MW_DMA_2:
171 mem_sttime = SBC_IDE_TIMING(MDMA2); 170 mem_sttime = SBC_IDE_TIMING(MDMA2);
@@ -297,8 +296,8 @@ static int auide_dma_test_irq(ide_drive_t *drive)
297 */ 296 */
298 drive->waiting_for_dma++; 297 drive->waiting_for_dma++;
299 if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) { 298 if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) {
300 printk(KERN_WARNING "%s: timeout waiting for ddma to \ 299 printk(KERN_WARNING "%s: timeout waiting for ddma to complete\n",
301 complete\n", drive->name); 300 drive->name);
302 return 1; 301 return 1;
303 } 302 }
304 udelay(10); 303 udelay(10);
diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c
index 1a32d62ed86b..d2b8b272bc27 100644
--- a/drivers/ide/cmd640.c
+++ b/drivers/ide/cmd640.c
@@ -572,9 +572,10 @@ static void cmd640_set_mode(ide_drive_t *drive, unsigned int index,
572 program_drive_counts(drive, index); 572 program_drive_counts(drive, index);
573} 573}
574 574
575static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) 575static void cmd640_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
576{ 576{
577 unsigned int index = 0, cycle_time; 577 unsigned int index = 0, cycle_time;
578 const u8 pio = drive->pio_mode - XFER_PIO_0;
578 u8 b; 579 u8 b;
579 580
580 switch (pio) { 581 switch (pio) {
@@ -605,7 +606,7 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio)
605} 606}
606#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ 607#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
607 608
608static void cmd640_init_dev(ide_drive_t *drive) 609static void __init cmd640_init_dev(ide_drive_t *drive)
609{ 610{
610 unsigned int i = drive->hwif->channel * 2 + (drive->dn & 1); 611 unsigned int i = drive->hwif->channel * 2 + (drive->dn & 1);
611 612
diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c
index f2500c8826bb..5f80312e636b 100644
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -7,6 +7,7 @@
7 * Copyright (C) 1998 David S. Miller (davem@redhat.com) 7 * Copyright (C) 1998 David S. Miller (davem@redhat.com)
8 * 8 *
9 * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> 9 * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
10 * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz
10 * Copyright (C) 2007,2009 MontaVista Software, Inc. <source@mvista.com> 11 * Copyright (C) 2007,2009 MontaVista Software, Inc. <source@mvista.com>
11 */ 12 */
12 13
@@ -50,72 +51,42 @@
50#define UDIDETCR1 0x7B 51#define UDIDETCR1 0x7B
51#define DTPR1 0x7C 52#define DTPR1 0x7C
52 53
53static u8 quantize_timing(int timing, int quant) 54static void cmd64x_program_timings(ide_drive_t *drive, u8 mode)
54{
55 return (timing + quant - 1) / quant;
56}
57
58/*
59 * This routine calculates active/recovery counts and then writes them into
60 * the chipset registers.
61 */
62static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time)
63{ 55{
56 ide_hwif_t *hwif = drive->hwif;
64 struct pci_dev *dev = to_pci_dev(drive->hwif->dev); 57 struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
65 int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : 33); 58 int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
66 u8 cycle_count, active_count, recovery_count, drwtim; 59 const unsigned long T = 1000000 / bus_speed;
67 static const u8 recovery_values[] = 60 static const u8 recovery_values[] =
68 {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0}; 61 {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0};
62 static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
63 static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
69 static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3}; 64 static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3};
65 struct ide_timing t;
66 u8 arttim = 0;
70 67
71 cycle_count = quantize_timing( cycle_time, clock_time); 68 ide_timing_compute(drive, mode, &t, T, 0);
72 active_count = quantize_timing(active_time, clock_time);
73 recovery_count = cycle_count - active_count;
74 69
75 /* 70 /*
76 * In case we've got too long recovery phase, try to lengthen 71 * In case we've got too long recovery phase, try to lengthen
77 * the active phase 72 * the active phase
78 */ 73 */
79 if (recovery_count > 16) { 74 if (t.recover > 16) {
80 active_count += recovery_count - 16; 75 t.active += t.recover - 16;
81 recovery_count = 16; 76 t.recover = 16;
82 } 77 }
83 if (active_count > 16) /* shouldn't actually happen... */ 78 if (t.active > 16) /* shouldn't actually happen... */
84 active_count = 16; 79 t.active = 16;
85 80
86 /* 81 /*
87 * Convert values to internal chipset representation 82 * Convert values to internal chipset representation
88 */ 83 */
89 recovery_count = recovery_values[recovery_count]; 84 t.recover = recovery_values[t.recover];
90 active_count &= 0x0f; 85 t.active &= 0x0f;
91 86
92 /* Program the active/recovery counts into the DRWTIM register */ 87 /* Program the active/recovery counts into the DRWTIM register */
93 drwtim = (active_count << 4) | recovery_count; 88 pci_write_config_byte(dev, drwtim_regs[drive->dn],
94 (void) pci_write_config_byte(dev, drwtim_regs[drive->dn], drwtim); 89 (t.active << 4) | t.recover);
95}
96
97/*
98 * This routine writes into the chipset registers
99 * PIO setup/active/recovery timings.
100 */
101static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
102{
103 ide_hwif_t *hwif = drive->hwif;
104 struct pci_dev *dev = to_pci_dev(hwif->dev);
105 struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
106 unsigned long setup_count;
107 unsigned int cycle_time;
108 u8 arttim = 0;
109
110 static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
111 static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
112
113 cycle_time = ide_pio_cycle_time(drive, pio);
114
115 program_cycle_times(drive, cycle_time, t->active);
116
117 setup_count = quantize_timing(t->setup,
118 1000 / (ide_pci_clk ? ide_pci_clk : 33));
119 90
120 /* 91 /*
121 * The primary channel has individual address setup timing registers 92 * The primary channel has individual address setup timing registers
@@ -126,15 +97,21 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
126 if (hwif->channel) { 97 if (hwif->channel) {
127 ide_drive_t *pair = ide_get_pair_dev(drive); 98 ide_drive_t *pair = ide_get_pair_dev(drive);
128 99
129 ide_set_drivedata(drive, (void *)setup_count); 100 if (pair) {
101 struct ide_timing tp;
130 102
131 if (pair) 103 ide_timing_compute(pair, pair->pio_mode, &tp, T, 0);
132 setup_count = max_t(u8, setup_count, 104 ide_timing_merge(&t, &tp, &t, IDE_TIMING_SETUP);
133 (unsigned long)ide_get_drivedata(pair)); 105 if (pair->dma_mode) {
106 ide_timing_compute(pair, pair->dma_mode,
107 &tp, T, 0);
108 ide_timing_merge(&tp, &t, &t, IDE_TIMING_SETUP);
109 }
110 }
134 } 111 }
135 112
136 if (setup_count > 5) /* shouldn't actually happen... */ 113 if (t.setup > 5) /* shouldn't actually happen... */
137 setup_count = 5; 114 t.setup = 5;
138 115
139 /* 116 /*
140 * Program the address setup clocks into the ARTTIM registers. 117 * Program the address setup clocks into the ARTTIM registers.
@@ -144,7 +121,7 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
144 if (hwif->channel) 121 if (hwif->channel)
145 arttim &= ~ARTTIM23_INTR_CH1; 122 arttim &= ~ARTTIM23_INTR_CH1;
146 arttim &= ~0xc0; 123 arttim &= ~0xc0;
147 arttim |= setup_values[setup_count]; 124 arttim |= setup_values[t.setup];
148 (void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim); 125 (void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim);
149} 126}
150 127
@@ -153,8 +130,10 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
153 * Special cases are 8: prefetch off, 9: prefetch on (both never worked) 130 * Special cases are 8: prefetch off, 9: prefetch on (both never worked)
154 */ 131 */
155 132
156static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio) 133static void cmd64x_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
157{ 134{
135 const u8 pio = drive->pio_mode - XFER_PIO_0;
136
158 /* 137 /*
159 * Filter out the prefetch control values 138 * Filter out the prefetch control values
160 * to prevent PIO5 from being programmed 139 * to prevent PIO5 from being programmed
@@ -162,20 +141,18 @@ static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio)
162 if (pio == 8 || pio == 9) 141 if (pio == 8 || pio == 9)
163 return; 142 return;
164 143
165 cmd64x_tune_pio(drive, pio); 144 cmd64x_program_timings(drive, XFER_PIO_0 + pio);
166} 145}
167 146
168static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed) 147static void cmd64x_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
169{ 148{
170 ide_hwif_t *hwif = drive->hwif;
171 struct pci_dev *dev = to_pci_dev(hwif->dev); 149 struct pci_dev *dev = to_pci_dev(hwif->dev);
172 u8 unit = drive->dn & 0x01; 150 u8 unit = drive->dn & 0x01;
173 u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0; 151 u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0;
152 const u8 speed = drive->dma_mode;
174 153
175 if (speed >= XFER_SW_DMA_0) { 154 pci_read_config_byte(dev, pciU, &regU);
176 (void) pci_read_config_byte(dev, pciU, &regU); 155 regU &= ~(unit ? 0xCA : 0x35);
177 regU &= ~(unit ? 0xCA : 0x35);
178 }
179 156
180 switch(speed) { 157 switch(speed) {
181 case XFER_UDMA_5: 158 case XFER_UDMA_5:
@@ -197,18 +174,13 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
197 regU |= unit ? 0xC2 : 0x31; 174 regU |= unit ? 0xC2 : 0x31;
198 break; 175 break;
199 case XFER_MW_DMA_2: 176 case XFER_MW_DMA_2:
200 program_cycle_times(drive, 120, 70);
201 break;
202 case XFER_MW_DMA_1: 177 case XFER_MW_DMA_1:
203 program_cycle_times(drive, 150, 80);
204 break;
205 case XFER_MW_DMA_0: 178 case XFER_MW_DMA_0:
206 program_cycle_times(drive, 480, 215); 179 cmd64x_program_timings(drive, speed);
207 break; 180 break;
208 } 181 }
209 182
210 if (speed >= XFER_SW_DMA_0) 183 pci_write_config_byte(dev, pciU, regU);
211 (void) pci_write_config_byte(dev, pciU, regU);
212} 184}
213 185
214static void cmd648_clear_irq(ide_drive_t *drive) 186static void cmd648_clear_irq(ide_drive_t *drive)
@@ -471,6 +443,6 @@ static void __exit cmd64x_ide_exit(void)
471module_init(cmd64x_ide_init); 443module_init(cmd64x_ide_init);
472module_exit(cmd64x_ide_exit); 444module_exit(cmd64x_ide_exit);
473 445
474MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick"); 446MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick, Bartlomiej Zolnierkiewicz");
475MODULE_DESCRIPTION("PCI driver module for CMD64x IDE"); 447MODULE_DESCRIPTION("PCI driver module for CMD64x IDE");
476MODULE_LICENSE("GPL"); 448MODULE_LICENSE("GPL");
diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c
index 09f98ed0731f..2c1e5f7cd261 100644
--- a/drivers/ide/cs5520.c
+++ b/drivers/ide/cs5520.c
@@ -57,11 +57,11 @@ static struct pio_clocks cs5520_pio_clocks[]={
57 {1, 2, 1} 57 {1, 2, 1}
58}; 58};
59 59
60static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio) 60static void cs5520_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
61{ 61{
62 ide_hwif_t *hwif = drive->hwif;
63 struct pci_dev *pdev = to_pci_dev(hwif->dev); 62 struct pci_dev *pdev = to_pci_dev(hwif->dev);
64 int controller = drive->dn > 1 ? 1 : 0; 63 int controller = drive->dn > 1 ? 1 : 0;
64 const u8 pio = drive->pio_mode - XFER_PIO_0;
65 65
66 /* 8bit CAT/CRT - 8bit command timing for channel */ 66 /* 8bit CAT/CRT - 8bit command timing for channel */
67 pci_write_config_byte(pdev, 0x62 + controller, 67 pci_write_config_byte(pdev, 0x62 + controller,
@@ -81,11 +81,12 @@ static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
81 (cs5520_pio_clocks[pio].assert)); 81 (cs5520_pio_clocks[pio].assert));
82} 82}
83 83
84static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed) 84static void cs5520_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
85{ 85{
86 printk(KERN_ERR "cs55x0: bad ide timing.\n"); 86 printk(KERN_ERR "cs55x0: bad ide timing.\n");
87 87
88 cs5520_set_pio_mode(drive, 0); 88 drive->pio_mode = XFER_PIO_0 + 0;
89 cs5520_set_pio_mode(hwif, drive);
89} 90}
90 91
91static const struct ide_port_ops cs5520_port_ops = { 92static const struct ide_port_ops cs5520_port_ops = {
diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c
index 40bf05eddf6e..4dc4eb92b076 100644
--- a/drivers/ide/cs5530.c
+++ b/drivers/ide/cs5530.c
@@ -41,8 +41,8 @@ static unsigned int cs5530_pio_timings[2][5] = {
41 41
42/** 42/**
43 * cs5530_set_pio_mode - set host controller for PIO mode 43 * cs5530_set_pio_mode - set host controller for PIO mode
44 * @hwif: port
44 * @drive: drive 45 * @drive: drive
45 * @pio: PIO mode number
46 * 46 *
47 * Handles setting of PIO mode for the chipset. 47 * Handles setting of PIO mode for the chipset.
48 * 48 *
@@ -50,10 +50,11 @@ static unsigned int cs5530_pio_timings[2][5] = {
50 * will have valid default PIO timings set up before we get here. 50 * will have valid default PIO timings set up before we get here.
51 */ 51 */
52 52
53static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio) 53static void cs5530_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
54{ 54{
55 unsigned long basereg = CS5530_BASEREG(drive->hwif); 55 unsigned long basereg = CS5530_BASEREG(hwif);
56 unsigned int format = (inl(basereg + 4) >> 31) & 1; 56 unsigned int format = (inl(basereg + 4) >> 31) & 1;
57 const u8 pio = drive->pio_mode - XFER_PIO_0;
57 58
58 outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3)); 59 outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3));
59} 60}
@@ -99,12 +100,12 @@ out:
99 return mask; 100 return mask;
100} 101}
101 102
102static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode) 103static void cs5530_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
103{ 104{
104 unsigned long basereg; 105 unsigned long basereg;
105 unsigned int reg, timings = 0; 106 unsigned int reg, timings = 0;
106 107
107 switch (mode) { 108 switch (drive->dma_mode) {
108 case XFER_UDMA_0: timings = 0x00921250; break; 109 case XFER_UDMA_0: timings = 0x00921250; break;
109 case XFER_UDMA_1: timings = 0x00911140; break; 110 case XFER_UDMA_1: timings = 0x00911140; break;
110 case XFER_UDMA_2: timings = 0x00911030; break; 111 case XFER_UDMA_2: timings = 0x00911030; break;
@@ -112,7 +113,7 @@ static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
112 case XFER_MW_DMA_1: timings = 0x00012121; break; 113 case XFER_MW_DMA_1: timings = 0x00012121; break;
113 case XFER_MW_DMA_2: timings = 0x00002020; break; 114 case XFER_MW_DMA_2: timings = 0x00002020; break;
114 } 115 }
115 basereg = CS5530_BASEREG(drive->hwif); 116 basereg = CS5530_BASEREG(hwif);
116 reg = inl(basereg + 4); /* get drive0 config register */ 117 reg = inl(basereg + 4); /* get drive0 config register */
117 timings |= reg & 0x80000000; /* preserve PIO format bit */ 118 timings |= reg & 0x80000000; /* preserve PIO format bit */
118 if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */ 119 if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */
diff --git a/drivers/ide/cs5535.c b/drivers/ide/cs5535.c
index b883838adc24..5059fafadf29 100644
--- a/drivers/ide/cs5535.c
+++ b/drivers/ide/cs5535.c
@@ -86,7 +86,7 @@ static void cs5535_set_speed(ide_drive_t *drive, const u8 speed)
86 cmd = pioa = speed - XFER_PIO_0; 86 cmd = pioa = speed - XFER_PIO_0;
87 87
88 if (pair) { 88 if (pair) {
89 u8 piob = ide_get_best_pio_mode(pair, 255, 4); 89 u8 piob = pair->pio_mode - XFER_PIO_0;
90 90
91 if (piob < cmd) 91 if (piob < cmd)
92 cmd = piob; 92 cmd = piob;
@@ -129,28 +129,28 @@ static void cs5535_set_speed(ide_drive_t *drive, const u8 speed)
129 129
130/** 130/**
131 * cs5535_set_dma_mode - set host controller for DMA mode 131 * cs5535_set_dma_mode - set host controller for DMA mode
132 * @hwif: port
132 * @drive: drive 133 * @drive: drive
133 * @speed: DMA mode
134 * 134 *
135 * Programs the chipset for DMA mode. 135 * Programs the chipset for DMA mode.
136 */ 136 */
137 137
138static void cs5535_set_dma_mode(ide_drive_t *drive, const u8 speed) 138static void cs5535_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
139{ 139{
140 cs5535_set_speed(drive, speed); 140 cs5535_set_speed(drive, drive->dma_mode);
141} 141}
142 142
143/** 143/**
144 * cs5535_set_pio_mode - set host controller for PIO mode 144 * cs5535_set_pio_mode - set host controller for PIO mode
145 * @hwif: port
145 * @drive: drive 146 * @drive: drive
146 * @pio: PIO mode number
147 * 147 *
148 * A callback from the upper layers for PIO-only tuning. 148 * A callback from the upper layers for PIO-only tuning.
149 */ 149 */
150 150
151static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio) 151static void cs5535_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
152{ 152{
153 cs5535_set_speed(drive, XFER_PIO_0 + pio); 153 cs5535_set_speed(drive, drive->pio_mode);
154} 154}
155 155
156static u8 cs5535_cable_detect(ide_hwif_t *hwif) 156static u8 cs5535_cable_detect(ide_hwif_t *hwif)
diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c
index 9623b852c616..24214ab60ac0 100644
--- a/drivers/ide/cs5536.c
+++ b/drivers/ide/cs5536.c
@@ -125,11 +125,11 @@ static u8 cs5536_cable_detect(ide_hwif_t *hwif)
125 125
126/** 126/**
127 * cs5536_set_pio_mode - PIO timing setup 127 * cs5536_set_pio_mode - PIO timing setup
128 * @hwif: ATA port
128 * @drive: ATA device 129 * @drive: ATA device
129 * @pio: PIO mode number
130 */ 130 */
131 131
132static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio) 132static void cs5536_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
133{ 133{
134 static const u8 drv_timings[5] = { 134 static const u8 drv_timings[5] = {
135 0x98, 0x55, 0x32, 0x21, 0x20, 135 0x98, 0x55, 0x32, 0x21, 0x20,
@@ -143,15 +143,16 @@ static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio)
143 0x99, 0x92, 0x90, 0x22, 0x20, 143 0x99, 0x92, 0x90, 0x22, 0x20,
144 }; 144 };
145 145
146 struct pci_dev *pdev = to_pci_dev(drive->hwif->dev); 146 struct pci_dev *pdev = to_pci_dev(hwif->dev);
147 ide_drive_t *pair = ide_get_pair_dev(drive); 147 ide_drive_t *pair = ide_get_pair_dev(drive);
148 int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT; 148 int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
149 unsigned long timings = (unsigned long)ide_get_drivedata(drive); 149 unsigned long timings = (unsigned long)ide_get_drivedata(drive);
150 u32 cast; 150 u32 cast;
151 const u8 pio = drive->pio_mode - XFER_PIO_0;
151 u8 cmd_pio = pio; 152 u8 cmd_pio = pio;
152 153
153 if (pair) 154 if (pair)
154 cmd_pio = min(pio, ide_get_best_pio_mode(pair, 255, 4)); 155 cmd_pio = min_t(u8, pio, pair->pio_mode - XFER_PIO_0);
155 156
156 timings &= (IDE_DRV_MASK << 8); 157 timings &= (IDE_DRV_MASK << 8);
157 timings |= drv_timings[pio]; 158 timings |= drv_timings[pio];
@@ -172,11 +173,11 @@ static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio)
172 173
173/** 174/**
174 * cs5536_set_dma_mode - DMA timing setup 175 * cs5536_set_dma_mode - DMA timing setup
176 * @hwif: ATA port
175 * @drive: ATA device 177 * @drive: ATA device
176 * @mode: DMA mode
177 */ 178 */
178 179
179static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode) 180static void cs5536_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
180{ 181{
181 static const u8 udma_timings[6] = { 182 static const u8 udma_timings[6] = {
182 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6, 183 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
@@ -186,10 +187,11 @@ static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode)
186 0x67, 0x21, 0x20, 187 0x67, 0x21, 0x20,
187 }; 188 };
188 189
189 struct pci_dev *pdev = to_pci_dev(drive->hwif->dev); 190 struct pci_dev *pdev = to_pci_dev(hwif->dev);
190 int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT; 191 int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
191 unsigned long timings = (unsigned long)ide_get_drivedata(drive); 192 unsigned long timings = (unsigned long)ide_get_drivedata(drive);
192 u32 etc; 193 u32 etc;
194 const u8 mode = drive->dma_mode;
193 195
194 cs5536_read(pdev, ETC, &etc); 196 cs5536_read(pdev, ETC, &etc);
195 197
diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c
index d6e2cbbc53a0..9383f67deae1 100644
--- a/drivers/ide/cy82c693.c
+++ b/drivers/ide/cy82c693.c
@@ -1,43 +1,11 @@
1/* 1/*
2 * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer 2 * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
3 * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator 3 * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
4 * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz
4 * 5 *
5 * CYPRESS CY82C693 chipset IDE controller 6 * CYPRESS CY82C693 chipset IDE controller
6 * 7 *
7 * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards. 8 * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards.
8 * Writing the driver was quite simple, since most of the job is
9 * done by the generic pci-ide support.
10 * The hard part was finding the CY82C693's datasheet on Cypress's
11 * web page :-(. But Altavista solved this problem :-).
12 *
13 *
14 * Notes:
15 * - I recently got a 16.8G IBM DTTA, so I was able to test it with
16 * a large and fast disk - the results look great, so I'd say the
17 * driver is working fine :-)
18 * hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA
19 * - this is my first linux driver, so there's probably a lot of room
20 * for optimizations and bug fixing, so feel free to do it.
21 * - if using PIO mode it's a good idea to set the PIO mode and
22 * 32-bit I/O support (if possible), e.g. hdparm -p2 -c1 /dev/hda
23 * - I had some problems with my IBM DHEA with PIO modes < 2
24 * (lost interrupts) ?????
25 * - first tests with DMA look okay, they seem to work, but there is a
26 * problem with sound - the BusMaster IDE TimeOut should fixed this
27 *
28 * Ancient History:
29 * AMH@1999-08-24: v0.34 init_cy82c693_chip moved to pci_init_cy82c693
30 * ASK@1999-01-23: v0.33 made a few minor code clean ups
31 * removed DMA clock speed setting by default
32 * added boot message
33 * ASK@1998-11-01: v0.32 added support to set BusMaster IDE TimeOut
34 * added support to set DMA Controller Clock Speed
35 * ASK@1998-10-31: v0.31 fixed problem with setting to high DMA modes
36 * on some drives.
37 * ASK@1998-10-29: v0.3 added support to set DMA modes
38 * ASK@1998-10-28: v0.2 added support to set PIO modes
39 * ASK@1998-10-27: v0.1 first version - chipset detection
40 *
41 */ 9 */
42 10
43#include <linux/module.h> 11#include <linux/module.h>
@@ -81,87 +49,13 @@
81#define CY82_INDEX_CHANNEL1 0x31 49#define CY82_INDEX_CHANNEL1 0x31
82#define CY82_INDEX_TIMEOUT 0x32 50#define CY82_INDEX_TIMEOUT 0x32
83 51
84/* the min and max PCI bus speed in MHz - from datasheet */
85#define CY82C963_MIN_BUS_SPEED 25
86#define CY82C963_MAX_BUS_SPEED 33
87
88/* the struct for the PIO mode timings */
89typedef struct pio_clocks_s {
90 u8 address_time; /* Address setup (clocks) */
91 u8 time_16r; /* clocks for 16bit IOR (0xF0=Active/data, 0x0F=Recovery) */
92 u8 time_16w; /* clocks for 16bit IOW (0xF0=Active/data, 0x0F=Recovery) */
93 u8 time_8; /* clocks for 8bit (0xF0=Active/data, 0x0F=Recovery) */
94} pio_clocks_t;
95
96/*
97 * calc clocks using bus_speed
98 * returns (rounded up) time in bus clocks for time in ns
99 */
100static int calc_clk(int time, int bus_speed)
101{
102 int clocks;
103
104 clocks = (time*bus_speed+999)/1000 - 1;
105
106 if (clocks < 0)
107 clocks = 0;
108
109 if (clocks > 0x0F)
110 clocks = 0x0F;
111
112 return clocks;
113}
114
115/*
116 * compute the values for the clock registers for PIO
117 * mode and pci_clk [MHz] speed
118 *
119 * NOTE: for mode 0,1 and 2 drives 8-bit IDE command control registers are used
120 * for mode 3 and 4 drives 8 and 16-bit timings are the same
121 *
122 */
123static void compute_clocks(u8 pio, pio_clocks_t *p_pclk)
124{
125 struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
126 int clk1, clk2;
127 int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
128
129 /* we don't check against CY82C693's min and max speed,
130 * so you can play with the idebus=xx parameter
131 */
132
133 /* let's calc the address setup time clocks */
134 p_pclk->address_time = (u8)calc_clk(t->setup, bus_speed);
135
136 /* let's calc the active and recovery time clocks */
137 clk1 = calc_clk(t->active, bus_speed);
138
139 /* calc recovery timing */
140 clk2 = t->cycle - t->active - t->setup;
141
142 clk2 = calc_clk(clk2, bus_speed);
143
144 clk1 = (clk1<<4)|clk2; /* combine active and recovery clocks */
145
146 /* note: we use the same values for 16bit IOR and IOW
147 * those are all the same, since I don't have other
148 * timings than those from ide-lib.c
149 */
150
151 p_pclk->time_16r = (u8)clk1;
152 p_pclk->time_16w = (u8)clk1;
153
154 /* what are good values for 8bit ?? */
155 p_pclk->time_8 = (u8)clk1;
156}
157
158/* 52/*
159 * set DMA mode a specific channel for CY82C693 53 * set DMA mode a specific channel for CY82C693
160 */ 54 */
161 55
162static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) 56static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
163{ 57{
164 ide_hwif_t *hwif = drive->hwif; 58 const u8 mode = drive->dma_mode;
165 u8 single = (mode & 0x10) >> 4, index = 0, data = 0; 59 u8 single = (mode & 0x10) >> 4, index = 0, data = 0;
166 60
167 index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0; 61 index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;
@@ -186,12 +80,14 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)
186 outb(data, CY82_DATA_PORT); 80 outb(data, CY82_DATA_PORT);
187} 81}
188 82
189static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) 83static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
190{ 84{
191 ide_hwif_t *hwif = drive->hwif;
192 struct pci_dev *dev = to_pci_dev(hwif->dev); 85 struct pci_dev *dev = to_pci_dev(hwif->dev);
193 pio_clocks_t pclk; 86 int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
87 const unsigned long T = 1000000 / bus_speed;
194 unsigned int addrCtrl; 88 unsigned int addrCtrl;
89 struct ide_timing t;
90 u8 time_16, time_8;
195 91
196 /* select primary or secondary channel */ 92 /* select primary or secondary channel */
197 if (hwif->index > 0) { /* drive is on the secondary channel */ 93 if (hwif->index > 0) { /* drive is on the secondary channel */
@@ -204,8 +100,12 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
204 } 100 }
205 } 101 }
206 102
207 /* let's calc the values for this PIO mode */ 103 ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
208 compute_clocks(pio, &pclk); 104
105 time_16 = clamp_val(t.recover - 1, 0, 15) |
106 (clamp_val(t.active - 1, 0, 15) << 4);
107 time_8 = clamp_val(t.act8b - 1, 0, 15) |
108 (clamp_val(t.rec8b - 1, 0, 15) << 4);
209 109
210 /* now let's write the clocks registers */ 110 /* now let's write the clocks registers */
211 if ((drive->dn & 1) == 0) { 111 if ((drive->dn & 1) == 0) {
@@ -217,13 +117,13 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
217 pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); 117 pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
218 118
219 addrCtrl &= (~0xF); 119 addrCtrl &= (~0xF);
220 addrCtrl |= (unsigned int)pclk.address_time; 120 addrCtrl |= clamp_val(t.setup - 1, 0, 15);
221 pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); 121 pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
222 122
223 /* now let's set the remaining registers */ 123 /* now let's set the remaining registers */
224 pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, pclk.time_16r); 124 pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, time_16);
225 pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, pclk.time_16w); 125 pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, time_16);
226 pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, pclk.time_8); 126 pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, time_8);
227 } else { 127 } else {
228 /* 128 /*
229 * set slave drive 129 * set slave drive
@@ -233,13 +133,13 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
233 pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); 133 pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
234 134
235 addrCtrl &= (~0xF0); 135 addrCtrl &= (~0xF0);
236 addrCtrl |= ((unsigned int)pclk.address_time<<4); 136 addrCtrl |= (clamp_val(t.setup - 1, 0, 15) << 4);
237 pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); 137 pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
238 138
239 /* now let's set the remaining registers */ 139 /* now let's set the remaining registers */
240 pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, pclk.time_16r); 140 pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, time_16);
241 pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, pclk.time_16w); 141 pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16);
242 pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, pclk.time_8); 142 pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8);
243 } 143 }
244} 144}
245 145
@@ -325,6 +225,6 @@ static void __exit cy82c693_ide_exit(void)
325module_init(cy82c693_ide_init); 225module_init(cy82c693_ide_init);
326module_exit(cy82c693_ide_exit); 226module_exit(cy82c693_ide_exit);
327 227
328MODULE_AUTHOR("Andreas Krebs, Andre Hedrick"); 228MODULE_AUTHOR("Andreas Krebs, Andre Hedrick, Bartlomiej Zolnierkiewicz");
329MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE"); 229MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE");
330MODULE_LICENSE("GPL"); 230MODULE_LICENSE("GPL");
diff --git a/drivers/ide/dtc2278.c b/drivers/ide/dtc2278.c
index c6b138122981..6929f7fce93a 100644
--- a/drivers/ide/dtc2278.c
+++ b/drivers/ide/dtc2278.c
@@ -68,11 +68,11 @@ static void sub22 (char b, char c)
68 68
69static DEFINE_SPINLOCK(dtc2278_lock); 69static DEFINE_SPINLOCK(dtc2278_lock);
70 70
71static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio) 71static void dtc2278_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
72{ 72{
73 unsigned long flags; 73 unsigned long flags;
74 74
75 if (pio >= 3) { 75 if (drive->pio_mode >= XFER_PIO_3) {
76 spin_lock_irqsave(&dtc2278_lock, flags); 76 spin_lock_irqsave(&dtc2278_lock, flags);
77 /* 77 /*
78 * This enables PIO mode4 (3?) on the first interface 78 * This enables PIO mode4 (3?) on the first interface
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index 4d90ac2dbb1b..b885c1d548f5 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -627,14 +627,14 @@ static u32 get_speed_setting(u8 speed, struct hpt_info *info)
627 return info->timings->clock_table[info->clock][i]; 627 return info->timings->clock_table[info->clock][i];
628} 628}
629 629
630static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed) 630static void hpt3xx_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
631{ 631{
632 ide_hwif_t *hwif = drive->hwif;
633 struct pci_dev *dev = to_pci_dev(hwif->dev); 632 struct pci_dev *dev = to_pci_dev(hwif->dev);
634 struct hpt_info *info = hpt3xx_get_info(hwif->dev); 633 struct hpt_info *info = hpt3xx_get_info(hwif->dev);
635 struct hpt_timings *t = info->timings; 634 struct hpt_timings *t = info->timings;
636 u8 itr_addr = 0x40 + (drive->dn * 4); 635 u8 itr_addr = 0x40 + (drive->dn * 4);
637 u32 old_itr = 0; 636 u32 old_itr = 0;
637 const u8 speed = drive->dma_mode;
638 u32 new_itr = get_speed_setting(speed, info); 638 u32 new_itr = get_speed_setting(speed, info);
639 u32 itr_mask = speed < XFER_MW_DMA_0 ? t->pio_mask : 639 u32 itr_mask = speed < XFER_MW_DMA_0 ? t->pio_mask :
640 (speed < XFER_UDMA_0 ? t->dma_mask : 640 (speed < XFER_UDMA_0 ? t->dma_mask :
@@ -651,9 +651,10 @@ static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
651 pci_write_config_dword(dev, itr_addr, new_itr); 651 pci_write_config_dword(dev, itr_addr, new_itr);
652} 652}
653 653
654static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio) 654static void hpt3xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
655{ 655{
656 hpt3xx_set_mode(drive, XFER_PIO_0 + pio); 656 drive->dma_mode = drive->pio_mode;
657 hpt3xx_set_mode(hwif, drive);
657} 658}
658 659
659static void hpt3xx_maskproc(ide_drive_t *drive, int mask) 660static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c
index aafed8060e17..d81e49680c3f 100644
--- a/drivers/ide/ht6560b.c
+++ b/drivers/ide/ht6560b.c
@@ -279,9 +279,10 @@ static void ht_set_prefetch(ide_drive_t *drive, u8 state)
279#endif 279#endif
280} 280}
281 281
282static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio) 282static void ht6560b_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
283{ 283{
284 unsigned long flags, config; 284 unsigned long flags, config;
285 const u8 pio = drive->pio_mode - XFER_PIO_0;
285 u8 timing; 286 u8 timing;
286 287
287 switch (pio) { 288 switch (pio) {
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 0f67f1abbbd3..4a697a238e28 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -65,6 +65,8 @@ static struct cardinfo icside_cardinfo_v6_2 = {
65}; 65};
66 66
67struct icside_state { 67struct icside_state {
68 unsigned int channel;
69 unsigned int enabled;
68 void __iomem *irq_port; 70 void __iomem *irq_port;
69 void __iomem *ioc_base; 71 void __iomem *ioc_base;
70 unsigned int sel; 72 unsigned int sel;
@@ -114,11 +116,18 @@ static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
114 struct icside_state *state = ec->irq_data; 116 struct icside_state *state = ec->irq_data;
115 void __iomem *base = state->irq_port; 117 void __iomem *base = state->irq_port;
116 118
117 writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1); 119 state->enabled = 1;
118 readb(base + ICS_ARCIN_V6_INTROFFSET_2);
119 120
120 writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2); 121 switch (state->channel) {
121 readb(base + ICS_ARCIN_V6_INTROFFSET_1); 122 case 0:
123 writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
124 readb(base + ICS_ARCIN_V6_INTROFFSET_2);
125 break;
126 case 1:
127 writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
128 readb(base + ICS_ARCIN_V6_INTROFFSET_1);
129 break;
130 }
122} 131}
123 132
124/* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) 133/* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
@@ -128,6 +137,8 @@ static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
128{ 137{
129 struct icside_state *state = ec->irq_data; 138 struct icside_state *state = ec->irq_data;
130 139
140 state->enabled = 0;
141
131 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); 142 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
132 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); 143 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
133} 144}
@@ -149,6 +160,44 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = {
149 .irqpending = icside_irqpending_arcin_v6, 160 .irqpending = icside_irqpending_arcin_v6,
150}; 161};
151 162
163/*
164 * Handle routing of interrupts. This is called before
165 * we write the command to the drive.
166 */
167static void icside_maskproc(ide_drive_t *drive, int mask)
168{
169 ide_hwif_t *hwif = drive->hwif;
170 struct expansion_card *ec = ECARD_DEV(hwif->dev);
171 struct icside_state *state = ecard_get_drvdata(ec);
172 unsigned long flags;
173
174 local_irq_save(flags);
175
176 state->channel = hwif->channel;
177
178 if (state->enabled && !mask) {
179 switch (hwif->channel) {
180 case 0:
181 writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
182 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
183 break;
184 case 1:
185 writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
186 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
187 break;
188 }
189 } else {
190 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
191 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
192 }
193
194 local_irq_restore(flags);
195}
196
197static const struct ide_port_ops icside_v6_no_dma_port_ops = {
198 .maskproc = icside_maskproc,
199};
200
152#ifdef CONFIG_BLK_DEV_IDEDMA_ICS 201#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
153/* 202/*
154 * SG-DMA support. 203 * SG-DMA support.
@@ -185,10 +234,11 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = {
185 * MW1 80 50 50 150 C 234 * MW1 80 50 50 150 C
186 * MW2 70 25 25 120 C 235 * MW2 70 25 25 120 C
187 */ 236 */
188static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode) 237static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
189{ 238{
190 unsigned long cycle_time; 239 unsigned long cycle_time;
191 int use_dma_info = 0; 240 int use_dma_info = 0;
241 const u8 xfer_mode = drive->dma_mode;
192 242
193 switch (xfer_mode) { 243 switch (xfer_mode) {
194 case XFER_MW_DMA_2: 244 case XFER_MW_DMA_2:
@@ -228,6 +278,7 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
228 278
229static const struct ide_port_ops icside_v6_port_ops = { 279static const struct ide_port_ops icside_v6_port_ops = {
230 .set_dma_mode = icside_set_dma_mode, 280 .set_dma_mode = icside_set_dma_mode,
281 .maskproc = icside_maskproc,
231}; 282};
232 283
233static void icside_dma_host_set(ide_drive_t *drive, int on) 284static void icside_dma_host_set(ide_drive_t *drive, int on)
@@ -272,6 +323,11 @@ static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
272 BUG_ON(dma_channel_active(ec->dma)); 323 BUG_ON(dma_channel_active(ec->dma));
273 324
274 /* 325 /*
326 * Ensure that we have the right interrupt routed.
327 */
328 icside_maskproc(drive, 0);
329
330 /*
275 * Route the DMA signals to the correct interface. 331 * Route the DMA signals to the correct interface.
276 */ 332 */
277 writeb(state->sel | hwif->channel, state->ioc_base); 333 writeb(state->sel | hwif->channel, state->ioc_base);
@@ -399,6 +455,7 @@ err_free:
399 455
400static const struct ide_port_info icside_v6_port_info __initdata = { 456static const struct ide_port_info icside_v6_port_info __initdata = {
401 .init_dma = icside_dma_off_init, 457 .init_dma = icside_dma_off_init,
458 .port_ops = &icside_v6_no_dma_port_ops,
402 .dma_ops = &icside_v6_dma_ops, 459 .dma_ops = &icside_v6_dma_ops,
403 .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO, 460 .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
404 .mwdma_mask = ATA_MWDMA2, 461 .mwdma_mask = ATA_MWDMA2,
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index dd6396384c25..ab87e4f7cec9 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -121,19 +121,11 @@ static int ide_probe(struct pcmcia_device *link)
121static void ide_detach(struct pcmcia_device *link) 121static void ide_detach(struct pcmcia_device *link)
122{ 122{
123 ide_info_t *info = link->priv; 123 ide_info_t *info = link->priv;
124 ide_hwif_t *hwif = info->host->ports[0];
125 unsigned long data_addr, ctl_addr;
126 124
127 dev_dbg(&link->dev, "ide_detach(0x%p)\n", link); 125 dev_dbg(&link->dev, "ide_detach(0x%p)\n", link);
128 126
129 data_addr = hwif->io_ports.data_addr;
130 ctl_addr = hwif->io_ports.ctl_addr;
131
132 ide_release(link); 127 ide_release(link);
133 128
134 release_region(ctl_addr, 1);
135 release_region(data_addr, 8);
136
137 kfree(info); 129 kfree(info);
138} /* ide_detach */ 130} /* ide_detach */
139 131
@@ -354,12 +346,19 @@ static void ide_release(struct pcmcia_device *link)
354 346
355 dev_dbg(&link->dev, "ide_release(0x%p)\n", link); 347 dev_dbg(&link->dev, "ide_release(0x%p)\n", link);
356 348
357 if (info->ndev) 349 if (info->ndev) {
358 /* FIXME: if this fails we need to queue the cleanup somehow 350 ide_hwif_t *hwif = host->ports[0];
359 -- need to investigate the required PCMCIA magic */ 351 unsigned long data_addr, ctl_addr;
352
353 data_addr = hwif->io_ports.data_addr;
354 ctl_addr = hwif->io_ports.ctl_addr;
355
360 ide_host_remove(host); 356 ide_host_remove(host);
357 info->ndev = 0;
361 358
362 info->ndev = 0; 359 release_region(ctl_addr, 1);
360 release_region(data_addr, 8);
361 }
363 362
364 pcmcia_disable_device(link); 363 pcmcia_disable_device(link);
365} /* ide_release */ 364} /* ide_release */
diff --git a/drivers/ide/ide-devsets.c b/drivers/ide/ide-devsets.c
index 1099bf7cf968..c6935c78757c 100644
--- a/drivers/ide/ide-devsets.c
+++ b/drivers/ide/ide-devsets.c
@@ -105,15 +105,17 @@ static int set_pio_mode(ide_drive_t *drive, int arg)
105 return -ENOSYS; 105 return -ENOSYS;
106 106
107 if (set_pio_mode_abuse(drive->hwif, arg)) { 107 if (set_pio_mode_abuse(drive->hwif, arg)) {
108 drive->pio_mode = arg + XFER_PIO_0;
109
108 if (arg == 8 || arg == 9) { 110 if (arg == 8 || arg == 9) {
109 unsigned long flags; 111 unsigned long flags;
110 112
111 /* take lock for IDE_DFLAG_[NO_]UNMASK/[NO_]IO_32BIT */ 113 /* take lock for IDE_DFLAG_[NO_]UNMASK/[NO_]IO_32BIT */
112 spin_lock_irqsave(&hwif->lock, flags); 114 spin_lock_irqsave(&hwif->lock, flags);
113 port_ops->set_pio_mode(drive, arg); 115 port_ops->set_pio_mode(hwif, drive);
114 spin_unlock_irqrestore(&hwif->lock, flags); 116 spin_unlock_irqrestore(&hwif->lock, flags);
115 } else 117 } else
116 port_ops->set_pio_mode(drive, arg); 118 port_ops->set_pio_mode(hwif, drive);
117 } else { 119 } else {
118 int keep_dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); 120 int keep_dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
119 121
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 222c1ef65fb9..376f2dc410c5 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -231,7 +231,7 @@ u8 eighty_ninty_three(ide_drive_t *drive)
231 u16 *id = drive->id; 231 u16 *id = drive->id;
232 int ivb = ide_in_drive_list(id, ivb_list); 232 int ivb = ide_in_drive_list(id, ivb_list);
233 233
234 if (hwif->cbl == ATA_CBL_PATA40_SHORT) 234 if (hwif->cbl == ATA_CBL_SATA || hwif->cbl == ATA_CBL_PATA40_SHORT)
235 return 1; 235 return 1;
236 236
237 if (ivb) 237 if (ivb)
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index f8c1ae6ad74c..fbedd35feb44 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1042,6 +1042,8 @@ static void ide_port_init_devices(ide_hwif_t *hwif)
1042 if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS) 1042 if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS)
1043 drive->dev_flags |= IDE_DFLAG_NO_UNMASK; 1043 drive->dev_flags |= IDE_DFLAG_NO_UNMASK;
1044 1044
1045 drive->pio_mode = XFER_PIO_0;
1046
1045 if (port_ops && port_ops->init_dev) 1047 if (port_ops && port_ops->init_dev)
1046 port_ops->init_dev(drive); 1048 port_ops->init_dev(drive);
1047 } 1049 }
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 6a0e62542167..b07232880ec9 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1365,7 +1365,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
1365 * supported here, and not in the corresponding block interface. Our own 1365 * supported here, and not in the corresponding block interface. Our own
1366 * ide-tape ioctls are supported on both interfaces. 1366 * ide-tape ioctls are supported on both interfaces.
1367 */ 1367 */
1368static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, 1368static long do_idetape_chrdev_ioctl(struct file *file,
1369 unsigned int cmd, unsigned long arg) 1369 unsigned int cmd, unsigned long arg)
1370{ 1370{
1371 struct ide_tape_obj *tape = file->private_data; 1371 struct ide_tape_obj *tape = file->private_data;
@@ -1420,6 +1420,16 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
1420 } 1420 }
1421} 1421}
1422 1422
1423static long idetape_chrdev_ioctl(struct file *file,
1424 unsigned int cmd, unsigned long arg)
1425{
1426 long ret;
1427 lock_kernel();
1428 ret = do_idetape_chrdev_ioctl(file, cmd, arg);
1429 unlock_kernel();
1430 return ret;
1431}
1432
1423/* 1433/*
1424 * Do a mode sense page 0 with block descriptor and if it succeeds set the tape 1434 * Do a mode sense page 0 with block descriptor and if it succeeds set the tape
1425 * block size with the reported value. 1435 * block size with the reported value.
@@ -1888,7 +1898,7 @@ static const struct file_operations idetape_fops = {
1888 .owner = THIS_MODULE, 1898 .owner = THIS_MODULE,
1889 .read = idetape_chrdev_read, 1899 .read = idetape_chrdev_read,
1890 .write = idetape_chrdev_write, 1900 .write = idetape_chrdev_write,
1891 .ioctl = idetape_chrdev_ioctl, 1901 .unlocked_ioctl = idetape_chrdev_ioctl,
1892 .open = idetape_chrdev_open, 1902 .open = idetape_chrdev_open,
1893 .release = idetape_chrdev_release, 1903 .release = idetape_chrdev_release,
1894}; 1904};
diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c
index 001a56365be5..0e05f75934c9 100644
--- a/drivers/ide/ide-timings.c
+++ b/drivers/ide/ide-timings.c
@@ -166,12 +166,13 @@ int ide_timing_compute(ide_drive_t *drive, u8 speed,
166 if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ 166 if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
167 memset(&p, 0, sizeof(p)); 167 memset(&p, 0, sizeof(p));
168 168
169 if (speed <= XFER_PIO_2) 169 if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) {
170 p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO]; 170 if (speed <= XFER_PIO_2)
171 else if ((speed <= XFER_PIO_4) || 171 p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
172 (speed == XFER_PIO_5 && !ata_id_is_cfa(id))) 172 else if ((speed <= XFER_PIO_4) ||
173 p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY]; 173 (speed == XFER_PIO_5 && !ata_id_is_cfa(id)))
174 else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) 174 p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY];
175 } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
175 p.cycle = id[ATA_ID_EIDE_DMA_MIN]; 176 p.cycle = id[ATA_ID_EIDE_DMA_MIN];
176 177
177 ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); 178 ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B);
@@ -185,11 +186,10 @@ int ide_timing_compute(ide_drive_t *drive, u8 speed,
185 /* 186 /*
186 * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, 187 * Even in DMA/UDMA modes we still use PIO access for IDENTIFY,
187 * S.M.A.R.T and some other commands. We have to ensure that the 188 * S.M.A.R.T and some other commands. We have to ensure that the
188 * DMA cycle timing is slower/equal than the fastest PIO timing. 189 * DMA cycle timing is slower/equal than the current PIO timing.
189 */ 190 */
190 if (speed >= XFER_SW_DMA_0) { 191 if (speed >= XFER_SW_DMA_0) {
191 u8 pio = ide_get_best_pio_mode(drive, 255, 5); 192 ide_timing_compute(drive, drive->pio_mode, &p, T, UT);
192 ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT);
193 ide_timing_merge(&p, t, t, IDE_TIMING_ALL); 193 ide_timing_merge(&p, t, t, IDE_TIMING_ALL);
194 } 194 }
195 195
diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c
index 46d203ce60cc..5fc8d5c17de9 100644
--- a/drivers/ide/ide-xfer-mode.c
+++ b/drivers/ide/ide-xfer-mode.c
@@ -58,7 +58,7 @@ EXPORT_SYMBOL(ide_xfer_verbose);
58 * This is used by most chipset support modules when "auto-tuning". 58 * This is used by most chipset support modules when "auto-tuning".
59 */ 59 */
60 60
61u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode) 61static u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
62{ 62{
63 u16 *id = drive->id; 63 u16 *id = drive->id;
64 int pio_mode = -1, overridden = 0; 64 int pio_mode = -1, overridden = 0;
@@ -105,7 +105,6 @@ u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
105 105
106 return pio_mode; 106 return pio_mode;
107} 107}
108EXPORT_SYMBOL_GPL(ide_get_best_pio_mode);
109 108
110int ide_pio_need_iordy(ide_drive_t *drive, const u8 pio) 109int ide_pio_need_iordy(ide_drive_t *drive, const u8 pio)
111{ 110{
@@ -135,17 +134,20 @@ int ide_set_pio_mode(ide_drive_t *drive, const u8 mode)
135 * set transfer mode on the device in ->set_pio_mode method... 134 * set transfer mode on the device in ->set_pio_mode method...
136 */ 135 */
137 if (port_ops->set_dma_mode == NULL) { 136 if (port_ops->set_dma_mode == NULL) {
138 port_ops->set_pio_mode(drive, mode - XFER_PIO_0); 137 drive->pio_mode = mode;
138 port_ops->set_pio_mode(hwif, drive);
139 return 0; 139 return 0;
140 } 140 }
141 141
142 if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { 142 if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
143 if (ide_config_drive_speed(drive, mode)) 143 if (ide_config_drive_speed(drive, mode))
144 return -1; 144 return -1;
145 port_ops->set_pio_mode(drive, mode - XFER_PIO_0); 145 drive->pio_mode = mode;
146 port_ops->set_pio_mode(hwif, drive);
146 return 0; 147 return 0;
147 } else { 148 } else {
148 port_ops->set_pio_mode(drive, mode - XFER_PIO_0); 149 drive->pio_mode = mode;
150 port_ops->set_pio_mode(hwif, drive);
149 return ide_config_drive_speed(drive, mode); 151 return ide_config_drive_speed(drive, mode);
150 } 152 }
151} 153}
@@ -164,10 +166,12 @@ int ide_set_dma_mode(ide_drive_t *drive, const u8 mode)
164 if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { 166 if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
165 if (ide_config_drive_speed(drive, mode)) 167 if (ide_config_drive_speed(drive, mode))
166 return -1; 168 return -1;
167 port_ops->set_dma_mode(drive, mode); 169 drive->dma_mode = mode;
170 port_ops->set_dma_mode(hwif, drive);
168 return 0; 171 return 0;
169 } else { 172 } else {
170 port_ops->set_dma_mode(drive, mode); 173 drive->dma_mode = mode;
174 port_ops->set_dma_mode(hwif, drive);
171 return ide_config_drive_speed(drive, mode); 175 return ide_config_drive_speed(drive, mode);
172 } 176 }
173} 177}
diff --git a/drivers/ide/it8172.c b/drivers/ide/it8172.c
index 0d266a5b524d..560e66d07659 100644
--- a/drivers/ide/it8172.c
+++ b/drivers/ide/it8172.c
@@ -37,12 +37,12 @@
37 37
38#define DRV_NAME "IT8172" 38#define DRV_NAME "IT8172"
39 39
40static void it8172_set_pio_mode(ide_drive_t *drive, const u8 pio) 40static void it8172_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
41{ 41{
42 ide_hwif_t *hwif = drive->hwif;
43 struct pci_dev *dev = to_pci_dev(hwif->dev); 42 struct pci_dev *dev = to_pci_dev(hwif->dev);
44 u16 drive_enables; 43 u16 drive_enables;
45 u32 drive_timing; 44 u32 drive_timing;
45 const u8 pio = drive->pio_mode - XFER_PIO_0;
46 46
47 /* 47 /*
48 * The highest value of DIOR/DIOW pulse width and recovery time 48 * The highest value of DIOR/DIOW pulse width and recovery time
@@ -77,14 +77,14 @@ static void it8172_set_pio_mode(ide_drive_t *drive, const u8 pio)
77 pci_write_config_dword(dev, 0x44, drive_timing); 77 pci_write_config_dword(dev, 0x44, drive_timing);
78} 78}
79 79
80static void it8172_set_dma_mode(ide_drive_t *drive, const u8 speed) 80static void it8172_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
81{ 81{
82 ide_hwif_t *hwif = drive->hwif;
83 struct pci_dev *dev = to_pci_dev(hwif->dev); 82 struct pci_dev *dev = to_pci_dev(hwif->dev);
84 int a_speed = 3 << (drive->dn * 4); 83 int a_speed = 3 << (drive->dn * 4);
85 int u_flag = 1 << drive->dn; 84 int u_flag = 1 << drive->dn;
86 int u_speed = 0; 85 int u_speed = 0;
87 u8 reg48, reg4a; 86 u8 reg48, reg4a;
87 const u8 speed = drive->dma_mode;
88 88
89 pci_read_config_byte(dev, 0x48, &reg48); 89 pci_read_config_byte(dev, 0x48, &reg48);
90 pci_read_config_byte(dev, 0x4a, &reg4a); 90 pci_read_config_byte(dev, 0x4a, &reg4a);
@@ -98,14 +98,14 @@ static void it8172_set_dma_mode(ide_drive_t *drive, const u8 speed)
98 pci_write_config_byte(dev, 0x4a, reg4a | u_speed); 98 pci_write_config_byte(dev, 0x4a, reg4a | u_speed);
99 } else { 99 } else {
100 const u8 mwdma_to_pio[] = { 0, 3, 4 }; 100 const u8 mwdma_to_pio[] = { 0, 3, 4 };
101 u8 pio;
102 101
103 pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); 102 pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
104 pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed); 103 pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed);
105 104
106 pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; 105 drive->pio_mode =
106 mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0;
107 107
108 it8172_set_pio_mode(drive, pio); 108 it8172_set_pio_mode(hwif, drive);
109 } 109 }
110} 110}
111 111
diff --git a/drivers/ide/it8213.c b/drivers/ide/it8213.c
index 47976167796a..46816ba26416 100644
--- a/drivers/ide/it8213.c
+++ b/drivers/ide/it8213.c
@@ -17,15 +17,14 @@
17 17
18/** 18/**
19 * it8213_set_pio_mode - set host controller for PIO mode 19 * it8213_set_pio_mode - set host controller for PIO mode
20 * @hwif: port
20 * @drive: drive 21 * @drive: drive
21 * @pio: PIO mode number
22 * 22 *
23 * Set the interface PIO mode. 23 * Set the interface PIO mode.
24 */ 24 */
25 25
26static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio) 26static void it8213_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
27{ 27{
28 ide_hwif_t *hwif = drive->hwif;
29 struct pci_dev *dev = to_pci_dev(hwif->dev); 28 struct pci_dev *dev = to_pci_dev(hwif->dev);
30 int is_slave = drive->dn & 1; 29 int is_slave = drive->dn & 1;
31 int master_port = 0x40; 30 int master_port = 0x40;
@@ -35,6 +34,7 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
35 u8 slave_data; 34 u8 slave_data;
36 static DEFINE_SPINLOCK(tune_lock); 35 static DEFINE_SPINLOCK(tune_lock);
37 int control = 0; 36 int control = 0;
37 const u8 pio = drive->pio_mode - XFER_PIO_0;
38 38
39 static const u8 timings[][2] = { 39 static const u8 timings[][2] = {
40 { 0, 0 }, 40 { 0, 0 },
@@ -74,15 +74,14 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
74 74
75/** 75/**
76 * it8213_set_dma_mode - set host controller for DMA mode 76 * it8213_set_dma_mode - set host controller for DMA mode
77 * @hwif: port
77 * @drive: drive 78 * @drive: drive
78 * @speed: DMA mode
79 * 79 *
80 * Tune the ITE chipset for the DMA mode. 80 * Tune the ITE chipset for the DMA mode.
81 */ 81 */
82 82
83static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) 83static void it8213_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
84{ 84{
85 ide_hwif_t *hwif = drive->hwif;
86 struct pci_dev *dev = to_pci_dev(hwif->dev); 85 struct pci_dev *dev = to_pci_dev(hwif->dev);
87 u8 maslave = 0x40; 86 u8 maslave = 0x40;
88 int a_speed = 3 << (drive->dn * 4); 87 int a_speed = 3 << (drive->dn * 4);
@@ -92,6 +91,7 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
92 int u_speed = 0; 91 int u_speed = 0;
93 u16 reg4042, reg4a; 92 u16 reg4042, reg4a;
94 u8 reg48, reg54, reg55; 93 u8 reg48, reg54, reg55;
94 const u8 speed = drive->dma_mode;
95 95
96 pci_read_config_word(dev, maslave, &reg4042); 96 pci_read_config_word(dev, maslave, &reg4042);
97 pci_read_config_byte(dev, 0x48, &reg48); 97 pci_read_config_byte(dev, 0x48, &reg48);
@@ -120,7 +120,6 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
120 pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); 120 pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
121 } else { 121 } else {
122 const u8 mwdma_to_pio[] = { 0, 3, 4 }; 122 const u8 mwdma_to_pio[] = { 0, 3, 4 };
123 u8 pio;
124 123
125 if (reg48 & u_flag) 124 if (reg48 & u_flag)
126 pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); 125 pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
@@ -132,11 +131,12 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
132 pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); 131 pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
133 132
134 if (speed >= XFER_MW_DMA_0) 133 if (speed >= XFER_MW_DMA_0)
135 pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; 134 drive->pio_mode =
135 mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0;
136 else 136 else
137 pio = 2; /* only SWDMA2 is allowed */ 137 drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */
138 138
139 it8213_set_pio_mode(drive, pio); 139 it8213_set_pio_mode(hwif, drive);
140 } 140 }
141} 141}
142 142
diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c
index 51aa745246dc..b2709c733485 100644
--- a/drivers/ide/it821x.c
+++ b/drivers/ide/it821x.c
@@ -228,18 +228,18 @@ static void it821x_clock_strategy(ide_drive_t *drive)
228 228
229/** 229/**
230 * it821x_set_pio_mode - set host controller for PIO mode 230 * it821x_set_pio_mode - set host controller for PIO mode
231 * @hwif: port
231 * @drive: drive 232 * @drive: drive
232 * @pio: PIO mode number
233 * 233 *
234 * Tune the host to the desired PIO mode taking into the consideration 234 * Tune the host to the desired PIO mode taking into the consideration
235 * the maximum PIO mode supported by the other device on the cable. 235 * the maximum PIO mode supported by the other device on the cable.
236 */ 236 */
237 237
238static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio) 238static void it821x_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
239{ 239{
240 ide_hwif_t *hwif = drive->hwif;
241 struct it821x_dev *itdev = ide_get_hwifdata(hwif); 240 struct it821x_dev *itdev = ide_get_hwifdata(hwif);
242 ide_drive_t *pair = ide_get_pair_dev(drive); 241 ide_drive_t *pair = ide_get_pair_dev(drive);
242 const u8 pio = drive->pio_mode - XFER_PIO_0;
243 u8 unit = drive->dn & 1, set_pio = pio; 243 u8 unit = drive->dn & 1, set_pio = pio;
244 244
245 /* Spec says 89 ref driver uses 88 */ 245 /* Spec says 89 ref driver uses 88 */
@@ -252,7 +252,7 @@ static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio)
252 * on the cable. 252 * on the cable.
253 */ 253 */
254 if (pair) { 254 if (pair) {
255 u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4); 255 u8 pair_pio = pair->pio_mode - XFER_PIO_0;
256 /* trim PIO to the slowest of the master/slave */ 256 /* trim PIO to the slowest of the master/slave */
257 if (pair_pio < set_pio) 257 if (pair_pio < set_pio)
258 set_pio = pair_pio; 258 set_pio = pair_pio;
@@ -393,14 +393,16 @@ static int it821x_dma_end(ide_drive_t *drive)
393 393
394/** 394/**
395 * it821x_set_dma_mode - set host controller for DMA mode 395 * it821x_set_dma_mode - set host controller for DMA mode
396 * @hwif: port
396 * @drive: drive 397 * @drive: drive
397 * @speed: DMA mode
398 * 398 *
399 * Tune the ITE chipset for the desired DMA mode. 399 * Tune the ITE chipset for the desired DMA mode.
400 */ 400 */
401 401
402static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed) 402static void it821x_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
403{ 403{
404 const u8 speed = drive->dma_mode;
405
404 /* 406 /*
405 * MWDMA tuning is really hard because our MWDMA and PIO 407 * MWDMA tuning is really hard because our MWDMA and PIO
406 * timings are kept in the same place. We can switch in the 408 * timings are kept in the same place. We can switch in the
diff --git a/drivers/ide/jmicron.c b/drivers/ide/jmicron.c
index bf2be6431b20..74c2c4a6d909 100644
--- a/drivers/ide/jmicron.c
+++ b/drivers/ide/jmicron.c
@@ -80,19 +80,19 @@ static u8 jmicron_cable_detect(ide_hwif_t *hwif)
80 return ATA_CBL_PATA80; 80 return ATA_CBL_PATA80;
81} 81}
82 82
83static void jmicron_set_pio_mode(ide_drive_t *drive, const u8 pio) 83static void jmicron_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
84{ 84{
85} 85}
86 86
87/** 87/**
88 * jmicron_set_dma_mode - set host controller for DMA mode 88 * jmicron_set_dma_mode - set host controller for DMA mode
89 * @hwif: port
89 * @drive: drive 90 * @drive: drive
90 * @mode: DMA mode
91 * 91 *
92 * As the JMicron snoops for timings we don't need to do anything here. 92 * As the JMicron snoops for timings we don't need to do anything here.
93 */ 93 */
94 94
95static void jmicron_set_dma_mode(ide_drive_t *drive, const u8 mode) 95static void jmicron_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
96{ 96{
97} 97}
98 98
diff --git a/drivers/ide/opti621.c b/drivers/ide/opti621.c
index f1d70d6630fe..1a53a4c375ed 100644
--- a/drivers/ide/opti621.c
+++ b/drivers/ide/opti621.c
@@ -8,77 +8,6 @@
8 * Jan Harkes <jaharkes@cwi.nl>, 8 * Jan Harkes <jaharkes@cwi.nl>,
9 * Mark Lord <mlord@pobox.com> 9 * Mark Lord <mlord@pobox.com>
10 * Some parts of code are from ali14xx.c and from rz1000.c. 10 * Some parts of code are from ali14xx.c and from rz1000.c.
11 *
12 * OPTi is trademark of OPTi, Octek is trademark of Octek.
13 *
14 * I used docs from OPTi databook, from ftp.opti.com, file 9123-0002.ps
15 * and disassembled/traced setupvic.exe (DOS program).
16 * It increases kernel code about 2 kB.
17 * I don't have this card no more, but I hope I can get some in case
18 * of needed development.
19 * My card is Octek PIDE 1.01 (on card) or OPTiViC (program).
20 * It has a place for a secondary connector in circuit, but nothing
21 * is there. Also BIOS says no address for
22 * secondary controller (see bellow in ide_init_opti621).
23 * I've only tested this on my system, which only has one disk.
24 * It's Western Digital WDAC2850, with PIO mode 3. The PCI bus
25 * is at 20 MHz (I have DX2/80, I tried PCI at 40, but I got random
26 * lockups). I tried the OCTEK double speed CD-ROM and
27 * it does not work! But I can't boot DOS also, so it's probably
28 * hardware fault. I have connected Conner 80MB, the Seagate 850MB (no
29 * problems) and Seagate 1GB (as slave, WD as master). My experiences
30 * with the third, 1GB drive: I got 3MB/s (hdparm), but sometimes
31 * it slows to about 100kB/s! I don't know why and I have
32 * not this drive now, so I can't try it again.
33 * I write this driver because I lost the paper ("manual") with
34 * settings of jumpers on the card and I have to boot Linux with
35 * Loadlin except LILO, cause I have to run the setupvic.exe program
36 * already or I get disk errors (my test: rpm -Vf
37 * /usr/X11R6/bin/XF86_SVGA - or any big file).
38 * Some numbers from hdparm -t /dev/hda:
39 * Timing buffer-cache reads: 32 MB in 3.02 seconds =10.60 MB/sec
40 * Timing buffered disk reads: 16 MB in 5.52 seconds = 2.90 MB/sec
41 * I have 4 Megs/s before, but I don't know why (maybe changes
42 * in hdparm test).
43 * After release of 0.1, I got some successful reports, so it might work.
44 *
45 * The main problem with OPTi is that some timings for master
46 * and slave must be the same. For example, if you have master
47 * PIO 3 and slave PIO 0, driver have to set some timings of
48 * master for PIO 0. Second problem is that opti621_set_pio_mode
49 * got only one drive to set, but have to set both drives.
50 * This is solved in compute_pios. If you don't set
51 * the second drive, compute_pios use ide_get_best_pio_mode
52 * for autoselect mode (you can change it to PIO 0, if you want).
53 * If you then set the second drive to another PIO, the old value
54 * (automatically selected) will be overrided by yours.
55 * There is a 25/33MHz switch in configuration
56 * register, but driver is written for use at any frequency.
57 *
58 * Version 0.1, Nov 8, 1996
59 * by Jaromir Koutek, for 2.1.8.
60 * Initial version of driver.
61 *
62 * Version 0.2
63 * Number 0.2 skipped.
64 *
65 * Version 0.3, Nov 29, 1997
66 * by Mark Lord (probably), for 2.1.68
67 * Updates for use with new IDE block driver.
68 *
69 * Version 0.4, Dec 14, 1997
70 * by Jan Harkes
71 * Fixed some errors and cleaned the code.
72 *
73 * Version 0.5, Jan 2, 1998
74 * by Jaromir Koutek
75 * Updates for use with (again) new IDE block driver.
76 * Update of documentation.
77 *
78 * Version 0.6, Jan 2, 1999
79 * by Jaromir Koutek
80 * Reversed to version 0.3 of the driver, because
81 * 0.5 doesn't work.
82 */ 11 */
83 12
84#include <linux/types.h> 13#include <linux/types.h>
@@ -133,12 +62,12 @@ static u8 read_reg(int reg)
133 return ret; 62 return ret;
134} 63}
135 64
136static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) 65static void opti621_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
137{ 66{
138 ide_hwif_t *hwif = drive->hwif;
139 ide_drive_t *pair = ide_get_pair_dev(drive); 67 ide_drive_t *pair = ide_get_pair_dev(drive);
140 unsigned long flags; 68 unsigned long flags;
141 unsigned long mode = XFER_PIO_0 + pio, pair_mode; 69 unsigned long mode = drive->pio_mode, pair_mode;
70 const u8 pio = mode - XFER_PIO_0;
142 u8 tim, misc, addr_pio = pio, clk; 71 u8 tim, misc, addr_pio = pio, clk;
143 72
144 /* DRDY is default 2 (by OPTi Databook) */ 73 /* DRDY is default 2 (by OPTi Databook) */
diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
index f8eddf05ecb8..9e8f4e1b0cc9 100644
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -166,7 +166,7 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
166 writel(val32, base + BK3710_DATRCVR); 166 writel(val32, base + BK3710_DATRCVR);
167 167
168 if (mate) { 168 if (mate) {
169 u8 mode2 = ide_get_best_pio_mode(mate, 255, 4); 169 u8 mode2 = mate->pio_mode - XFER_PIO_0;
170 170
171 if (mode2 < mode) 171 if (mode2 < mode)
172 mode = mode2; 172 mode = mode2;
@@ -188,10 +188,11 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
188 writel(val32, base + BK3710_REGRCVR); 188 writel(val32, base + BK3710_REGRCVR);
189} 189}
190 190
191static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed) 191static void palm_bk3710_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
192{ 192{
193 int is_slave = drive->dn & 1; 193 int is_slave = drive->dn & 1;
194 void __iomem *base = (void *)drive->hwif->dma_base; 194 void __iomem *base = (void *)hwif->dma_base;
195 const u8 xferspeed = drive->dma_mode;
195 196
196 if (xferspeed >= XFER_UDMA_0) { 197 if (xferspeed >= XFER_UDMA_0) {
197 palm_bk3710_setudmamode(base, is_slave, 198 palm_bk3710_setudmamode(base, is_slave,
@@ -203,12 +204,13 @@ static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed)
203 } 204 }
204} 205}
205 206
206static void palm_bk3710_set_pio_mode(ide_drive_t *drive, u8 pio) 207static void palm_bk3710_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
207{ 208{
208 unsigned int cycle_time; 209 unsigned int cycle_time;
209 int is_slave = drive->dn & 1; 210 int is_slave = drive->dn & 1;
210 ide_drive_t *mate; 211 ide_drive_t *mate;
211 void __iomem *base = (void *)drive->hwif->dma_base; 212 void __iomem *base = (void *)hwif->dma_base;
213 const u8 pio = drive->pio_mode - XFER_PIO_0;
212 214
213 /* 215 /*
214 * Obtain the drive PIO data for tuning the Palm Chip registers 216 * Obtain the drive PIO data for tuning the Palm Chip registers
diff --git a/drivers/ide/pdc202xx_new.c b/drivers/ide/pdc202xx_new.c
index 65ba8239e7b5..9546fe2a93f7 100644
--- a/drivers/ide/pdc202xx_new.c
+++ b/drivers/ide/pdc202xx_new.c
@@ -129,11 +129,11 @@ static struct udma_timing {
129 { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ 129 { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */
130}; 130};
131 131
132static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed) 132static void pdcnew_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
133{ 133{
134 ide_hwif_t *hwif = drive->hwif;
135 struct pci_dev *dev = to_pci_dev(hwif->dev); 134 struct pci_dev *dev = to_pci_dev(hwif->dev);
136 u8 adj = (drive->dn & 1) ? 0x08 : 0x00; 135 u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
136 const u8 speed = drive->dma_mode;
137 137
138 /* 138 /*
139 * IDE core issues SETFEATURES_XFER to the drive first (thanks to 139 * IDE core issues SETFEATURES_XFER to the drive first (thanks to
@@ -167,11 +167,11 @@ static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed)
167 } 167 }
168} 168}
169 169
170static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio) 170static void pdcnew_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
171{ 171{
172 ide_hwif_t *hwif = drive->hwif;
173 struct pci_dev *dev = to_pci_dev(hwif->dev); 172 struct pci_dev *dev = to_pci_dev(hwif->dev);
174 u8 adj = (drive->dn & 1) ? 0x08 : 0x00; 173 u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
174 const u8 pio = drive->pio_mode - XFER_PIO_0;
175 175
176 if (max_dma_rate(dev) == 4) { 176 if (max_dma_rate(dev) == 4) {
177 set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c); 177 set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c);
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index 35161dd840a0..c5f3841af360 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -1,7 +1,7 @@
1/* 1/*
2 * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org> 2 * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>
3 * Copyright (C) 2006-2007, 2009 MontaVista Software, Inc. 3 * Copyright (C) 2006-2007, 2009 MontaVista Software, Inc.
4 * Copyright (C) 2007 Bartlomiej Zolnierkiewicz 4 * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz
5 * 5 *
6 * Portions Copyright (C) 1999 Promise Technology, Inc. 6 * Portions Copyright (C) 1999 Promise Technology, Inc.
7 * Author: Frank Tiernan (frankt@promise.com) 7 * Author: Frank Tiernan (frankt@promise.com)
@@ -21,23 +21,15 @@
21 21
22#define DRV_NAME "pdc202xx_old" 22#define DRV_NAME "pdc202xx_old"
23 23
24static void pdc_old_disable_66MHz_clock(ide_hwif_t *); 24static void pdc202xx_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
25
26static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
27{ 25{
28 ide_hwif_t *hwif = drive->hwif;
29 struct pci_dev *dev = to_pci_dev(hwif->dev); 26 struct pci_dev *dev = to_pci_dev(hwif->dev);
30 u8 drive_pci = 0x60 + (drive->dn << 2); 27 u8 drive_pci = 0x60 + (drive->dn << 2);
28 const u8 speed = drive->dma_mode;
31 29
32 u8 AP = 0, BP = 0, CP = 0; 30 u8 AP = 0, BP = 0, CP = 0;
33 u8 TA = 0, TB = 0, TC = 0; 31 u8 TA = 0, TB = 0, TC = 0;
34 32
35 /*
36 * TODO: do this once per channel
37 */
38 if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
39 pdc_old_disable_66MHz_clock(hwif);
40
41 pci_read_config_byte(dev, drive_pci, &AP); 33 pci_read_config_byte(dev, drive_pci, &AP);
42 pci_read_config_byte(dev, drive_pci + 1, &BP); 34 pci_read_config_byte(dev, drive_pci + 1, &BP);
43 pci_read_config_byte(dev, drive_pci + 2, &CP); 35 pci_read_config_byte(dev, drive_pci + 2, &CP);
@@ -84,9 +76,10 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
84 } 76 }
85} 77}
86 78
87static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio) 79static void pdc202xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
88{ 80{
89 pdc202xx_set_mode(drive, XFER_PIO_0 + pio); 81 drive->dma_mode = drive->pio_mode;
82 pdc202xx_set_mode(hwif, drive);
90} 83}
91 84
92static int pdc202xx_test_irq(ide_hwif_t *hwif) 85static int pdc202xx_test_irq(ide_hwif_t *hwif)
@@ -100,13 +93,13 @@ static int pdc202xx_test_irq(ide_hwif_t *hwif)
100 * bit 7: error, bit 6: interrupting, 93 * bit 7: error, bit 6: interrupting,
101 * bit 5: FIFO full, bit 4: FIFO empty 94 * bit 5: FIFO full, bit 4: FIFO empty
102 */ 95 */
103 return ((sc1d & 0x50) == 0x40) ? 1 : 0; 96 return ((sc1d & 0x50) == 0x50) ? 1 : 0;
104 } else { 97 } else {
105 /* 98 /*
106 * bit 3: error, bit 2: interrupting, 99 * bit 3: error, bit 2: interrupting,
107 * bit 1: FIFO full, bit 0: FIFO empty 100 * bit 1: FIFO full, bit 0: FIFO empty
108 */ 101 */
109 return ((sc1d & 0x05) == 0x04) ? 1 : 0; 102 return ((sc1d & 0x05) == 0x05) ? 1 : 0;
110 } 103 }
111} 104}
112 105
@@ -145,6 +138,11 @@ static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif)
145 outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg); 138 outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg);
146} 139}
147 140
141static void pdc2026x_init_hwif(ide_hwif_t *hwif)
142{
143 pdc_old_disable_66MHz_clock(hwif);
144}
145
148static void pdc202xx_dma_start(ide_drive_t *drive) 146static void pdc202xx_dma_start(ide_drive_t *drive)
149{ 147{
150 if (drive->current_speed > XFER_UDMA_2) 148 if (drive->current_speed > XFER_UDMA_2)
@@ -261,6 +259,7 @@ static const struct ide_dma_ops pdc2026x_dma_ops = {
261 { \ 259 { \
262 .name = DRV_NAME, \ 260 .name = DRV_NAME, \
263 .init_chipset = init_chipset_pdc202xx, \ 261 .init_chipset = init_chipset_pdc202xx, \
262 .init_hwif = pdc2026x_init_hwif, \
264 .port_ops = &pdc2026x_port_ops, \ 263 .port_ops = &pdc2026x_port_ops, \
265 .dma_ops = &pdc2026x_dma_ops, \ 264 .dma_ops = &pdc2026x_dma_ops, \
266 .host_flags = IDE_HFLAGS_PDC202XX, \ 265 .host_flags = IDE_HFLAGS_PDC202XX, \
@@ -356,6 +355,6 @@ static void __exit pdc202xx_ide_exit(void)
356module_init(pdc202xx_ide_init); 355module_init(pdc202xx_ide_init);
357module_exit(pdc202xx_ide_exit); 356module_exit(pdc202xx_ide_exit);
358 357
359MODULE_AUTHOR("Andre Hedrick, Frank Tiernan"); 358MODULE_AUTHOR("Andre Hedrick, Frank Tiernan, Bartlomiej Zolnierkiewicz");
360MODULE_DESCRIPTION("PCI driver module for older Promise IDE"); 359MODULE_DESCRIPTION("PCI driver module for older Promise IDE");
361MODULE_LICENSE("GPL"); 360MODULE_LICENSE("GPL");
diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c
index bf14f39bd3a7..1bdca49e5a03 100644
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -59,15 +59,14 @@ static int no_piix_dma;
59 59
60/** 60/**
61 * piix_set_pio_mode - set host controller for PIO mode 61 * piix_set_pio_mode - set host controller for PIO mode
62 * @port: port
62 * @drive: drive 63 * @drive: drive
63 * @pio: PIO mode number
64 * 64 *
65 * Set the interface PIO mode based upon the settings done by AMI BIOS. 65 * Set the interface PIO mode based upon the settings done by AMI BIOS.
66 */ 66 */
67 67
68static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio) 68static void piix_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
69{ 69{
70 ide_hwif_t *hwif = drive->hwif;
71 struct pci_dev *dev = to_pci_dev(hwif->dev); 70 struct pci_dev *dev = to_pci_dev(hwif->dev);
72 int is_slave = drive->dn & 1; 71 int is_slave = drive->dn & 1;
73 int master_port = hwif->channel ? 0x42 : 0x40; 72 int master_port = hwif->channel ? 0x42 : 0x40;
@@ -77,6 +76,7 @@ static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
77 u8 slave_data; 76 u8 slave_data;
78 static DEFINE_SPINLOCK(tune_lock); 77 static DEFINE_SPINLOCK(tune_lock);
79 int control = 0; 78 int control = 0;
79 const u8 pio = drive->pio_mode - XFER_PIO_0;
80 80
81 /* ISP RTC */ 81 /* ISP RTC */
82 static const u8 timings[][2]= { 82 static const u8 timings[][2]= {
@@ -127,16 +127,15 @@ static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
127 127
128/** 128/**
129 * piix_set_dma_mode - set host controller for DMA mode 129 * piix_set_dma_mode - set host controller for DMA mode
130 * @hwif: port
130 * @drive: drive 131 * @drive: drive
131 * @speed: DMA mode
132 * 132 *
133 * Set a PIIX host controller to the desired DMA mode. This involves 133 * Set a PIIX host controller to the desired DMA mode. This involves
134 * programming the right timing data into the PCI configuration space. 134 * programming the right timing data into the PCI configuration space.
135 */ 135 */
136 136
137static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) 137static void piix_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
138{ 138{
139 ide_hwif_t *hwif = drive->hwif;
140 struct pci_dev *dev = to_pci_dev(hwif->dev); 139 struct pci_dev *dev = to_pci_dev(hwif->dev);
141 u8 maslave = hwif->channel ? 0x42 : 0x40; 140 u8 maslave = hwif->channel ? 0x42 : 0x40;
142 int a_speed = 3 << (drive->dn * 4); 141 int a_speed = 3 << (drive->dn * 4);
@@ -147,6 +146,7 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
147 int sitre; 146 int sitre;
148 u16 reg4042, reg4a; 147 u16 reg4042, reg4a;
149 u8 reg48, reg54, reg55; 148 u8 reg48, reg54, reg55;
149 const u8 speed = drive->dma_mode;
150 150
151 pci_read_config_word(dev, maslave, &reg4042); 151 pci_read_config_word(dev, maslave, &reg4042);
152 sitre = (reg4042 & 0x4000) ? 1 : 0; 152 sitre = (reg4042 & 0x4000) ? 1 : 0;
@@ -176,7 +176,6 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
176 pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); 176 pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
177 } else { 177 } else {
178 const u8 mwdma_to_pio[] = { 0, 3, 4 }; 178 const u8 mwdma_to_pio[] = { 0, 3, 4 };
179 u8 pio;
180 179
181 if (reg48 & u_flag) 180 if (reg48 & u_flag)
182 pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); 181 pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
@@ -188,11 +187,12 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
188 pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); 187 pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
189 188
190 if (speed >= XFER_MW_DMA_0) 189 if (speed >= XFER_MW_DMA_0)
191 pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; 190 drive->pio_mode =
191 mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0;
192 else 192 else
193 pio = 2; /* only SWDMA2 is allowed */ 193 drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */
194 194
195 piix_set_pio_mode(drive, pio); 195 piix_set_pio_mode(hwif, drive);
196 } 196 }
197} 197}
198 198
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index 7a4e788cab2f..850ee452e9bb 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -496,12 +496,11 @@ static void pmac_write_devctl(ide_hwif_t *hwif, u8 ctl)
496/* 496/*
497 * Old tuning functions (called on hdparm -p), sets up drive PIO timings 497 * Old tuning functions (called on hdparm -p), sets up drive PIO timings
498 */ 498 */
499static void 499static void pmac_ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
500pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
501{ 500{
502 ide_hwif_t *hwif = drive->hwif;
503 pmac_ide_hwif_t *pmif = 501 pmac_ide_hwif_t *pmif =
504 (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); 502 (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
503 const u8 pio = drive->pio_mode - XFER_PIO_0;
505 struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio); 504 struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio);
506 u32 *timings, t; 505 u32 *timings, t;
507 unsigned accessTicks, recTicks; 506 unsigned accessTicks, recTicks;
@@ -778,14 +777,14 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
778#endif 777#endif
779} 778}
780 779
781static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) 780static void pmac_ide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
782{ 781{
783 ide_hwif_t *hwif = drive->hwif;
784 pmac_ide_hwif_t *pmif = 782 pmac_ide_hwif_t *pmif =
785 (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); 783 (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
786 int ret = 0; 784 int ret = 0;
787 u32 *timings, *timings2, tl[2]; 785 u32 *timings, *timings2, tl[2];
788 u8 unit = drive->dn & 1; 786 u8 unit = drive->dn & 1;
787 const u8 speed = drive->dma_mode;
789 788
790 timings = &pmif->timings[unit]; 789 timings = &pmif->timings[unit];
791 timings2 = &pmif->timings[unit+2]; 790 timings2 = &pmif->timings[unit+2];
@@ -1651,8 +1650,8 @@ pmac_ide_dma_test_irq (ide_drive_t *drive)
1651 if ((status & FLUSH) == 0) 1650 if ((status & FLUSH) == 0)
1652 break; 1651 break;
1653 if (++timeout > 100) { 1652 if (++timeout > 100) {
1654 printk(KERN_WARNING "ide%d, ide_dma_test_irq \ 1653 printk(KERN_WARNING "ide%d, ide_dma_test_irq timeout flushing channel\n",
1655 timeout flushing channel\n", hwif->index); 1654 hwif->index);
1656 break; 1655 break;
1657 } 1656 }
1658 } 1657 }
diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c
index 74696edc8d1d..3f0244fd8e62 100644
--- a/drivers/ide/qd65xx.c
+++ b/drivers/ide/qd65xx.c
@@ -189,15 +189,13 @@ static void qd_set_timing (ide_drive_t *drive, u8 timing)
189 printk(KERN_DEBUG "%s: %#x\n", drive->name, timing); 189 printk(KERN_DEBUG "%s: %#x\n", drive->name, timing);
190} 190}
191 191
192static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio) 192static void qd6500_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
193{ 193{
194 u16 *id = drive->id; 194 u16 *id = drive->id;
195 int active_time = 175; 195 int active_time = 175;
196 int recovery_time = 415; /* worst case values from the dos driver */ 196 int recovery_time = 415; /* worst case values from the dos driver */
197 197
198 /* 198 /* FIXME: use drive->pio_mode value */
199 * FIXME: use "pio" value
200 */
201 if (!qd_find_disk_type(drive, &active_time, &recovery_time) && 199 if (!qd_find_disk_type(drive, &active_time, &recovery_time) &&
202 (id[ATA_ID_OLD_PIO_MODES] & 0xff) && (id[ATA_ID_FIELD_VALID] & 2) && 200 (id[ATA_ID_OLD_PIO_MODES] & 0xff) && (id[ATA_ID_FIELD_VALID] & 2) &&
203 id[ATA_ID_EIDE_PIO] >= 240) { 201 id[ATA_ID_EIDE_PIO] >= 240) {
@@ -211,9 +209,9 @@ static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio)
211 active_time, recovery_time)); 209 active_time, recovery_time));
212} 210}
213 211
214static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio) 212static void qd6580_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
215{ 213{
216 ide_hwif_t *hwif = drive->hwif; 214 const u8 pio = drive->pio_mode - XFER_PIO_0;
217 struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); 215 struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
218 unsigned int cycle_time; 216 unsigned int cycle_time;
219 int active_time = 175; 217 int active_time = 175;
diff --git a/drivers/ide/sc1200.c b/drivers/ide/sc1200.c
index d467478d68da..134f1fd13866 100644
--- a/drivers/ide/sc1200.c
+++ b/drivers/ide/sc1200.c
@@ -122,13 +122,13 @@ out:
122 return mask; 122 return mask;
123} 123}
124 124
125static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode) 125static void sc1200_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
126{ 126{
127 ide_hwif_t *hwif = drive->hwif;
128 struct pci_dev *dev = to_pci_dev(hwif->dev); 127 struct pci_dev *dev = to_pci_dev(hwif->dev);
129 unsigned int reg, timings; 128 unsigned int reg, timings;
130 unsigned short pci_clock; 129 unsigned short pci_clock;
131 unsigned int basereg = hwif->channel ? 0x50 : 0x40; 130 unsigned int basereg = hwif->channel ? 0x50 : 0x40;
131 const u8 mode = drive->dma_mode;
132 132
133 static const u32 udma_timing[3][3] = { 133 static const u32 udma_timing[3][3] = {
134 { 0x00921250, 0x00911140, 0x00911030 }, 134 { 0x00921250, 0x00911140, 0x00911030 },
@@ -193,10 +193,10 @@ static int sc1200_dma_end(ide_drive_t *drive)
193 * will have valid default PIO timings set up before we get here. 193 * will have valid default PIO timings set up before we get here.
194 */ 194 */
195 195
196static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio) 196static void sc1200_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
197{ 197{
198 ide_hwif_t *hwif = drive->hwif;
199 int mode = -1; 198 int mode = -1;
199 const u8 pio = drive->pio_mode - XFER_PIO_0;
200 200
201 /* 201 /*
202 * bad abuse of ->set_pio_mode interface 202 * bad abuse of ->set_pio_mode interface
diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c
index 1104bb301eb9..b7f5b0c4310c 100644
--- a/drivers/ide/scc_pata.c
+++ b/drivers/ide/scc_pata.c
@@ -199,16 +199,15 @@ scc_ide_outsl(unsigned long port, void *addr, u32 count)
199 199
200/** 200/**
201 * scc_set_pio_mode - set host controller for PIO mode 201 * scc_set_pio_mode - set host controller for PIO mode
202 * @hwif: port
202 * @drive: drive 203 * @drive: drive
203 * @pio: PIO mode number
204 * 204 *
205 * Load the timing settings for this device mode into the 205 * Load the timing settings for this device mode into the
206 * controller. 206 * controller.
207 */ 207 */
208 208
209static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio) 209static void scc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
210{ 210{
211 ide_hwif_t *hwif = drive->hwif;
212 struct scc_ports *ports = ide_get_hwifdata(hwif); 211 struct scc_ports *ports = ide_get_hwifdata(hwif);
213 unsigned long ctl_base = ports->ctl; 212 unsigned long ctl_base = ports->ctl;
214 unsigned long cckctrl_port = ctl_base + 0xff0; 213 unsigned long cckctrl_port = ctl_base + 0xff0;
@@ -216,6 +215,7 @@ static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio)
216 unsigned long pioct_port = ctl_base + 0x004; 215 unsigned long pioct_port = ctl_base + 0x004;
217 unsigned long reg; 216 unsigned long reg;
218 int offset; 217 int offset;
218 const u8 pio = drive->pio_mode - XFER_PIO_0;
219 219
220 reg = in_be32((void __iomem *)cckctrl_port); 220 reg = in_be32((void __iomem *)cckctrl_port);
221 if (reg & CCKCTRL_ATACLKOEN) { 221 if (reg & CCKCTRL_ATACLKOEN) {
@@ -231,16 +231,15 @@ static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio)
231 231
232/** 232/**
233 * scc_set_dma_mode - set host controller for DMA mode 233 * scc_set_dma_mode - set host controller for DMA mode
234 * @hwif: port
234 * @drive: drive 235 * @drive: drive
235 * @speed: DMA mode
236 * 236 *
237 * Load the timing settings for this device mode into the 237 * Load the timing settings for this device mode into the
238 * controller. 238 * controller.
239 */ 239 */
240 240
241static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed) 241static void scc_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
242{ 242{
243 ide_hwif_t *hwif = drive->hwif;
244 struct scc_ports *ports = ide_get_hwifdata(hwif); 243 struct scc_ports *ports = ide_get_hwifdata(hwif);
245 unsigned long ctl_base = ports->ctl; 244 unsigned long ctl_base = ports->ctl;
246 unsigned long cckctrl_port = ctl_base + 0xff0; 245 unsigned long cckctrl_port = ctl_base + 0xff0;
@@ -254,6 +253,7 @@ static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
254 int offset, idx; 253 int offset, idx;
255 unsigned long reg; 254 unsigned long reg;
256 unsigned long jcactsel; 255 unsigned long jcactsel;
256 const u8 speed = drive->dma_mode;
257 257
258 reg = in_be32((void __iomem *)cckctrl_port); 258 reg = in_be32((void __iomem *)cckctrl_port);
259 if (reg & CCKCTRL_ATACLKOEN) { 259 if (reg & CCKCTRL_ATACLKOEN) {
@@ -872,20 +872,18 @@ static struct pci_driver scc_pci_driver = {
872 .remove = __devexit_p(scc_remove), 872 .remove = __devexit_p(scc_remove),
873}; 873};
874 874
875static int scc_ide_init(void) 875static int __init scc_ide_init(void)
876{ 876{
877 return ide_pci_register_driver(&scc_pci_driver); 877 return ide_pci_register_driver(&scc_pci_driver);
878} 878}
879 879
880module_init(scc_ide_init); 880static void __exit scc_ide_exit(void)
881/* -- No exit code?
882static void scc_ide_exit(void)
883{ 881{
884 ide_pci_unregister_driver(&scc_pci_driver); 882 pci_unregister_driver(&scc_pci_driver);
885} 883}
886module_exit(scc_ide_exit);
887 */
888 884
885module_init(scc_ide_init);
886module_exit(scc_ide_exit);
889 887
890MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE"); 888MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
891MODULE_LICENSE("GPL"); 889MODULE_LICENSE("GPL");
diff --git a/drivers/ide/serverworks.c b/drivers/ide/serverworks.c
index b6554ef92716..35fb8dabb55d 100644
--- a/drivers/ide/serverworks.c
+++ b/drivers/ide/serverworks.c
@@ -2,7 +2,7 @@
2 * Copyright (C) 1998-2000 Michel Aubry 2 * Copyright (C) 1998-2000 Michel Aubry
3 * Copyright (C) 1998-2000 Andrzej Krzysztofowicz 3 * Copyright (C) 1998-2000 Andrzej Krzysztofowicz
4 * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> 4 * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
5 * Copyright (C) 2007 Bartlomiej Zolnierkiewicz 5 * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz
6 * Portions copyright (c) 2001 Sun Microsystems 6 * Portions copyright (c) 2001 Sun Microsystems
7 * 7 *
8 * 8 *
@@ -52,8 +52,6 @@ static const char *svwks_bad_ata100[] = {
52 NULL 52 NULL
53}; 53};
54 54
55static struct pci_dev *isa_dev;
56
57static int check_in_drive_lists (ide_drive_t *drive, const char **list) 55static int check_in_drive_lists (ide_drive_t *drive, const char **list)
58{ 56{
59 char *m = (char *)&drive->id[ATA_ID_PROD]; 57 char *m = (char *)&drive->id[ATA_ID_PROD];
@@ -67,26 +65,14 @@ static int check_in_drive_lists (ide_drive_t *drive, const char **list)
67static u8 svwks_udma_filter(ide_drive_t *drive) 65static u8 svwks_udma_filter(ide_drive_t *drive)
68{ 66{
69 struct pci_dev *dev = to_pci_dev(drive->hwif->dev); 67 struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
70 u8 mask = 0;
71 68
72 if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) 69 if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) {
73 return 0x1f; 70 return 0x1f;
74 if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
75 u32 reg = 0;
76 if (isa_dev)
77 pci_read_config_dword(isa_dev, 0x64, &reg);
78
79 /*
80 * Don't enable UDMA on disk devices for the moment
81 */
82 if(drive->media == ide_disk)
83 return 0;
84 /* Check the OSB4 DMA33 enable bit */
85 return ((reg & 0x00004000) == 0x00004000) ? 0x07 : 0;
86 } else if (dev->revision < SVWKS_CSB5_REVISION_NEW) { 71 } else if (dev->revision < SVWKS_CSB5_REVISION_NEW) {
87 return 0x07; 72 return 0x07;
88 } else if (dev->revision >= SVWKS_CSB5_REVISION_NEW) { 73 } else {
89 u8 btr = 0, mode; 74 u8 btr = 0, mode, mask;
75
90 pci_read_config_byte(dev, 0x5A, &btr); 76 pci_read_config_byte(dev, 0x5A, &btr);
91 mode = btr & 0x3; 77 mode = btr & 0x3;
92 78
@@ -101,13 +87,9 @@ static u8 svwks_udma_filter(ide_drive_t *drive)
101 case 1: mask = 0x07; break; 87 case 1: mask = 0x07; break;
102 default: mask = 0x00; break; 88 default: mask = 0x00; break;
103 } 89 }
104 }
105 if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
106 (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) &&
107 (!(PCI_FUNC(dev->devfn) & 1)))
108 mask = 0x1f;
109 90
110 return mask; 91 return mask;
92 }
111} 93}
112 94
113static u8 svwks_csb_check (struct pci_dev *dev) 95static u8 svwks_csb_check (struct pci_dev *dev)
@@ -124,12 +106,13 @@ static u8 svwks_csb_check (struct pci_dev *dev)
124 return 0; 106 return 0;
125} 107}
126 108
127static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio) 109static void svwks_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
128{ 110{
129 static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 }; 111 static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
130 static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 }; 112 static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 };
131 113
132 struct pci_dev *dev = to_pci_dev(drive->hwif->dev); 114 struct pci_dev *dev = to_pci_dev(hwif->dev);
115 const u8 pio = drive->pio_mode - XFER_PIO_0;
133 116
134 pci_write_config_byte(dev, drive_pci[drive->dn], pio_modes[pio]); 117 pci_write_config_byte(dev, drive_pci[drive->dn], pio_modes[pio]);
135 118
@@ -145,14 +128,14 @@ static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio)
145 } 128 }
146} 129}
147 130
148static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed) 131static void svwks_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
149{ 132{
150 static const u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 }; 133 static const u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 };
151 static const u8 dma_modes[] = { 0x77, 0x21, 0x20 }; 134 static const u8 dma_modes[] = { 0x77, 0x21, 0x20 };
152 static const u8 drive_pci2[] = { 0x45, 0x44, 0x47, 0x46 }; 135 static const u8 drive_pci2[] = { 0x45, 0x44, 0x47, 0x46 };
153 136
154 ide_hwif_t *hwif = drive->hwif;
155 struct pci_dev *dev = to_pci_dev(hwif->dev); 137 struct pci_dev *dev = to_pci_dev(hwif->dev);
138 const u8 speed = drive->dma_mode;
156 u8 unit = drive->dn & 1; 139 u8 unit = drive->dn & 1;
157 140
158 u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0; 141 u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0;
@@ -185,8 +168,9 @@ static int init_chipset_svwks(struct pci_dev *dev)
185 168
186 /* OSB4 : South Bridge and IDE */ 169 /* OSB4 : South Bridge and IDE */
187 if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { 170 if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
188 isa_dev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, 171 struct pci_dev *isa_dev =
189 PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL); 172 pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
173 PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL);
190 if (isa_dev) { 174 if (isa_dev) {
191 pci_read_config_dword(isa_dev, 0x64, &reg); 175 pci_read_config_dword(isa_dev, 0x64, &reg);
192 reg &= ~0x00002000; /* disable 600ns interrupt mask */ 176 reg &= ~0x00002000; /* disable 600ns interrupt mask */
@@ -195,6 +179,7 @@ static int init_chipset_svwks(struct pci_dev *dev)
195 "enabled.\n", pci_name(dev)); 179 "enabled.\n", pci_name(dev));
196 reg |= 0x00004000; /* enable UDMA/33 support */ 180 reg |= 0x00004000; /* enable UDMA/33 support */
197 pci_write_config_dword(isa_dev, 0x64, reg); 181 pci_write_config_dword(isa_dev, 0x64, reg);
182 pci_dev_put(isa_dev);
198 } 183 }
199 } 184 }
200 185
@@ -343,7 +328,6 @@ static u8 svwks_cable_detect(ide_hwif_t *hwif)
343static const struct ide_port_ops osb4_port_ops = { 328static const struct ide_port_ops osb4_port_ops = {
344 .set_pio_mode = svwks_set_pio_mode, 329 .set_pio_mode = svwks_set_pio_mode,
345 .set_dma_mode = svwks_set_dma_mode, 330 .set_dma_mode = svwks_set_dma_mode,
346 .udma_filter = svwks_udma_filter,
347}; 331};
348 332
349static const struct ide_port_ops svwks_port_ops = { 333static const struct ide_port_ops svwks_port_ops = {
@@ -460,6 +444,6 @@ static void __exit svwks_ide_exit(void)
460module_init(svwks_ide_init); 444module_init(svwks_ide_init);
461module_exit(svwks_ide_exit); 445module_exit(svwks_ide_exit);
462 446
463MODULE_AUTHOR("Michael Aubry. Andrzej Krzysztofowicz, Andre Hedrick"); 447MODULE_AUTHOR("Michael Aubry. Andrzej Krzysztofowicz, Andre Hedrick, Bartlomiej Zolnierkiewicz");
464MODULE_DESCRIPTION("PCI driver module for Serverworks OSB4/CSB5/CSB6 IDE"); 448MODULE_DESCRIPTION("PCI driver module for Serverworks OSB4/CSB5/CSB6 IDE");
465MODULE_LICENSE("GPL"); 449MODULE_LICENSE("GPL");
diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c
index b7d61dc64096..e3ea591f66d3 100644
--- a/drivers/ide/sgiioc4.c
+++ b/drivers/ide/sgiioc4.c
@@ -255,7 +255,7 @@ static int sgiioc4_dma_end(ide_drive_t *drive)
255 return dma_stat; 255 return dma_stat;
256} 256}
257 257
258static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed) 258static void sgiioc4_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
259{ 259{
260} 260}
261 261
diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c
index d95df528562f..ddeda444a27a 100644
--- a/drivers/ide/siimage.c
+++ b/drivers/ide/siimage.c
@@ -229,19 +229,18 @@ static u8 sil_sata_udma_filter(ide_drive_t *drive)
229 229
230/** 230/**
231 * sil_set_pio_mode - set host controller for PIO mode 231 * sil_set_pio_mode - set host controller for PIO mode
232 * @hwif: port
232 * @drive: drive 233 * @drive: drive
233 * @pio: PIO mode number
234 * 234 *
235 * Load the timing settings for this device mode into the 235 * Load the timing settings for this device mode into the
236 * controller. 236 * controller.
237 */ 237 */
238 238
239static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) 239static void sil_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
240{ 240{
241 static const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 }; 241 static const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 };
242 static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 }; 242 static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
243 243
244 ide_hwif_t *hwif = drive->hwif;
245 struct pci_dev *dev = to_pci_dev(hwif->dev); 244 struct pci_dev *dev = to_pci_dev(hwif->dev);
246 ide_drive_t *pair = ide_get_pair_dev(drive); 245 ide_drive_t *pair = ide_get_pair_dev(drive);
247 u32 speedt = 0; 246 u32 speedt = 0;
@@ -249,6 +248,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
249 unsigned long addr = siimage_seldev(drive, 0x04); 248 unsigned long addr = siimage_seldev(drive, 0x04);
250 unsigned long tfaddr = siimage_selreg(hwif, 0x02); 249 unsigned long tfaddr = siimage_selreg(hwif, 0x02);
251 unsigned long base = (unsigned long)hwif->hwif_data; 250 unsigned long base = (unsigned long)hwif->hwif_data;
251 const u8 pio = drive->pio_mode - XFER_PIO_0;
252 u8 tf_pio = pio; 252 u8 tf_pio = pio;
253 u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; 253 u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
254 u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84) 254 u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84)
@@ -258,7 +258,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
258 258
259 /* trim *taskfile* PIO to the slowest of the master/slave */ 259 /* trim *taskfile* PIO to the slowest of the master/slave */
260 if (pair) { 260 if (pair) {
261 u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4); 261 u8 pair_pio = pair->pio_mode - XFER_PIO_0;
262 262
263 if (pair_pio < tf_pio) 263 if (pair_pio < tf_pio)
264 tf_pio = pair_pio; 264 tf_pio = pair_pio;
@@ -289,19 +289,18 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
289 289
290/** 290/**
291 * sil_set_dma_mode - set host controller for DMA mode 291 * sil_set_dma_mode - set host controller for DMA mode
292 * @hwif: port
292 * @drive: drive 293 * @drive: drive
293 * @speed: DMA mode
294 * 294 *
295 * Tune the SiI chipset for the desired DMA mode. 295 * Tune the SiI chipset for the desired DMA mode.
296 */ 296 */
297 297
298static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) 298static void sil_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
299{ 299{
300 static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }; 300 static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
301 static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 }; 301 static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 };
302 static const u16 dma[] = { 0x2208, 0x10C2, 0x10C1 }; 302 static const u16 dma[] = { 0x2208, 0x10C2, 0x10C1 };
303 303
304 ide_hwif_t *hwif = drive->hwif;
305 struct pci_dev *dev = to_pci_dev(hwif->dev); 304 struct pci_dev *dev = to_pci_dev(hwif->dev);
306 unsigned long base = (unsigned long)hwif->hwif_data; 305 unsigned long base = (unsigned long)hwif->hwif_data;
307 u16 ultra = 0, multi = 0; 306 u16 ultra = 0, multi = 0;
@@ -311,6 +310,7 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
311 : (mmio ? 0xB4 : 0x80); 310 : (mmio ? 0xB4 : 0x80);
312 unsigned long ma = siimage_seldev(drive, 0x08); 311 unsigned long ma = siimage_seldev(drive, 0x08);
313 unsigned long ua = siimage_seldev(drive, 0x0C); 312 unsigned long ua = siimage_seldev(drive, 0x0C);
313 const u8 speed = drive->dma_mode;
314 314
315 scsc = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A)); 315 scsc = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A));
316 mode = sil_ioread8 (dev, base + addr_mask); 316 mode = sil_ioread8 (dev, base + addr_mask);
diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c
index 468706082fb5..db7f4e761dbc 100644
--- a/drivers/ide/sis5513.c
+++ b/drivers/ide/sis5513.c
@@ -290,10 +290,10 @@ static void config_drive_art_rwp(ide_drive_t *drive)
290 pci_write_config_byte(dev, 0x4b, rw_prefetch); 290 pci_write_config_byte(dev, 0x4b, rw_prefetch);
291} 291}
292 292
293static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio) 293static void sis_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
294{ 294{
295 config_drive_art_rwp(drive); 295 config_drive_art_rwp(drive);
296 sis_program_timings(drive, XFER_PIO_0 + pio); 296 sis_program_timings(drive, drive->pio_mode);
297} 297}
298 298
299static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode) 299static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode)
@@ -340,8 +340,10 @@ static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode)
340 sis_ata33_program_udma_timings(drive, mode); 340 sis_ata33_program_udma_timings(drive, mode);
341} 341}
342 342
343static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) 343static void sis_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
344{ 344{
345 const u8 speed = drive->dma_mode;
346
345 if (speed >= XFER_UDMA_0) 347 if (speed >= XFER_UDMA_0)
346 sis_program_udma_timings(drive, speed); 348 sis_program_udma_timings(drive, speed);
347 else 349 else
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index 3c2bbf0057ea..f21dc2ad7682 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -63,12 +63,13 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
63/* 63/*
64 * Configure the chipset for PIO mode. 64 * Configure the chipset for PIO mode.
65 */ 65 */
66static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio) 66static void sl82c105_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
67{ 67{
68 struct pci_dev *dev = to_pci_dev(drive->hwif->dev); 68 struct pci_dev *dev = to_pci_dev(hwif->dev);
69 unsigned long timings = (unsigned long)ide_get_drivedata(drive); 69 unsigned long timings = (unsigned long)ide_get_drivedata(drive);
70 int reg = 0x44 + drive->dn * 4; 70 int reg = 0x44 + drive->dn * 4;
71 u16 drv_ctrl; 71 u16 drv_ctrl;
72 const u8 pio = drive->pio_mode - XFER_PIO_0;
72 73
73 drv_ctrl = get_pio_timings(drive, pio); 74 drv_ctrl = get_pio_timings(drive, pio);
74 75
@@ -91,11 +92,12 @@ static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
91/* 92/*
92 * Configure the chipset for DMA mode. 93 * Configure the chipset for DMA mode.
93 */ 94 */
94static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed) 95static void sl82c105_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
95{ 96{
96 static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200}; 97 static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200};
97 unsigned long timings = (unsigned long)ide_get_drivedata(drive); 98 unsigned long timings = (unsigned long)ide_get_drivedata(drive);
98 u16 drv_ctrl; 99 u16 drv_ctrl;
100 const u8 speed = drive->dma_mode;
99 101
100 drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0]; 102 drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
101 103
diff --git a/drivers/ide/slc90e66.c b/drivers/ide/slc90e66.c
index 1ccfb40e7215..864ffe0e26d9 100644
--- a/drivers/ide/slc90e66.c
+++ b/drivers/ide/slc90e66.c
@@ -18,9 +18,8 @@
18 18
19static DEFINE_SPINLOCK(slc90e66_lock); 19static DEFINE_SPINLOCK(slc90e66_lock);
20 20
21static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) 21static void slc90e66_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
22{ 22{
23 ide_hwif_t *hwif = drive->hwif;
24 struct pci_dev *dev = to_pci_dev(hwif->dev); 23 struct pci_dev *dev = to_pci_dev(hwif->dev);
25 int is_slave = drive->dn & 1; 24 int is_slave = drive->dn & 1;
26 int master_port = hwif->channel ? 0x42 : 0x40; 25 int master_port = hwif->channel ? 0x42 : 0x40;
@@ -29,6 +28,8 @@ static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
29 u16 master_data; 28 u16 master_data;
30 u8 slave_data; 29 u8 slave_data;
31 int control = 0; 30 int control = 0;
31 const u8 pio = drive->pio_mode - XFER_PIO_0;
32
32 /* ISP RTC */ 33 /* ISP RTC */
33 static const u8 timings[][2] = { 34 static const u8 timings[][2] = {
34 { 0, 0 }, 35 { 0, 0 },
@@ -71,14 +72,14 @@ static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
71 spin_unlock_irqrestore(&slc90e66_lock, flags); 72 spin_unlock_irqrestore(&slc90e66_lock, flags);
72} 73}
73 74
74static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed) 75static void slc90e66_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
75{ 76{
76 ide_hwif_t *hwif = drive->hwif;
77 struct pci_dev *dev = to_pci_dev(hwif->dev); 77 struct pci_dev *dev = to_pci_dev(hwif->dev);
78 u8 maslave = hwif->channel ? 0x42 : 0x40; 78 u8 maslave = hwif->channel ? 0x42 : 0x40;
79 int sitre = 0, a_speed = 7 << (drive->dn * 4); 79 int sitre = 0, a_speed = 7 << (drive->dn * 4);
80 int u_speed = 0, u_flag = 1 << drive->dn; 80 int u_speed = 0, u_flag = 1 << drive->dn;
81 u16 reg4042, reg44, reg48, reg4a; 81 u16 reg4042, reg44, reg48, reg4a;
82 const u8 speed = drive->dma_mode;
82 83
83 pci_read_config_word(dev, maslave, &reg4042); 84 pci_read_config_word(dev, maslave, &reg4042);
84 sitre = (reg4042 & 0x4000) ? 1 : 0; 85 sitre = (reg4042 & 0x4000) ? 1 : 0;
@@ -98,7 +99,6 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
98 } 99 }
99 } else { 100 } else {
100 const u8 mwdma_to_pio[] = { 0, 3, 4 }; 101 const u8 mwdma_to_pio[] = { 0, 3, 4 };
101 u8 pio;
102 102
103 if (reg48 & u_flag) 103 if (reg48 & u_flag)
104 pci_write_config_word(dev, 0x48, reg48 & ~u_flag); 104 pci_write_config_word(dev, 0x48, reg48 & ~u_flag);
@@ -106,11 +106,12 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
106 pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); 106 pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
107 107
108 if (speed >= XFER_MW_DMA_0) 108 if (speed >= XFER_MW_DMA_0)
109 pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; 109 drive->pio_mode =
110 mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0;
110 else 111 else
111 pio = 2; /* only SWDMA2 is allowed */ 112 drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */
112 113
113 slc90e66_set_pio_mode(drive, pio); 114 slc90e66_set_pio_mode(hwif, drive);
114 } 115 }
115} 116}
116 117
diff --git a/drivers/ide/tc86c001.c b/drivers/ide/tc86c001.c
index 05a93d6baecc..e444d24934b3 100644
--- a/drivers/ide/tc86c001.c
+++ b/drivers/ide/tc86c001.c
@@ -13,11 +13,11 @@
13 13
14#define DRV_NAME "tc86c001" 14#define DRV_NAME "tc86c001"
15 15
16static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed) 16static void tc86c001_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
17{ 17{
18 ide_hwif_t *hwif = drive->hwif;
19 unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00); 18 unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00);
20 u16 mode, scr = inw(scr_port); 19 u16 mode, scr = inw(scr_port);
20 const u8 speed = drive->dma_mode;
21 21
22 switch (speed) { 22 switch (speed) {
23 case XFER_UDMA_4: mode = 0x00c0; break; 23 case XFER_UDMA_4: mode = 0x00c0; break;
@@ -41,9 +41,10 @@ static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed)
41 outw(scr, scr_port); 41 outw(scr, scr_port);
42} 42}
43 43
44static void tc86c001_set_pio_mode(ide_drive_t *drive, const u8 pio) 44static void tc86c001_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
45{ 45{
46 tc86c001_set_mode(drive, XFER_PIO_0 + pio); 46 drive->dma_mode = drive->pio_mode;
47 tc86c001_set_mode(hwif, drive);
47} 48}
48 49
49/* 50/*
diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c
index 8773c3ba7462..7953447eae0f 100644
--- a/drivers/ide/triflex.c
+++ b/drivers/ide/triflex.c
@@ -34,9 +34,8 @@
34 34
35#define DRV_NAME "triflex" 35#define DRV_NAME "triflex"
36 36
37static void triflex_set_mode(ide_drive_t *drive, const u8 speed) 37static void triflex_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
38{ 38{
39 ide_hwif_t *hwif = drive->hwif;
40 struct pci_dev *dev = to_pci_dev(hwif->dev); 39 struct pci_dev *dev = to_pci_dev(hwif->dev);
41 u32 triflex_timings = 0; 40 u32 triflex_timings = 0;
42 u16 timing = 0; 41 u16 timing = 0;
@@ -44,7 +43,7 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
44 43
45 pci_read_config_dword(dev, channel_offset, &triflex_timings); 44 pci_read_config_dword(dev, channel_offset, &triflex_timings);
46 45
47 switch(speed) { 46 switch (drive->dma_mode) {
48 case XFER_MW_DMA_2: 47 case XFER_MW_DMA_2:
49 timing = 0x0103; 48 timing = 0x0103;
50 break; 49 break;
@@ -82,9 +81,10 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
82 pci_write_config_dword(dev, channel_offset, triflex_timings); 81 pci_write_config_dword(dev, channel_offset, triflex_timings);
83} 82}
84 83
85static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio) 84static void triflex_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
86{ 85{
87 triflex_set_mode(drive, XFER_PIO_0 + pio); 86 drive->dma_mode = drive->pio_mode;
87 triflex_set_mode(hwif, drive);
88} 88}
89 89
90static const struct ide_port_ops triflex_port_ops = { 90static const struct ide_port_ops triflex_port_ops = {
diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
index fd59c0d235b5..1d80f1fdbc97 100644
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -56,16 +56,15 @@ static void tx4938ide_tune_ebusc(unsigned int ebus_ch,
56 &tx4938_ebuscptr->cr[ebus_ch]); 56 &tx4938_ebuscptr->cr[ebus_ch]);
57} 57}
58 58
59static void tx4938ide_set_pio_mode(ide_drive_t *drive, const u8 pio) 59static void tx4938ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
60{ 60{
61 ide_hwif_t *hwif = drive->hwif;
62 struct tx4938ide_platform_info *pdata = hwif->dev->platform_data; 61 struct tx4938ide_platform_info *pdata = hwif->dev->platform_data;
63 u8 safe = pio; 62 u8 safe = drive->pio_mode - XFER_PIO_0;
64 ide_drive_t *pair; 63 ide_drive_t *pair;
65 64
66 pair = ide_get_pair_dev(drive); 65 pair = ide_get_pair_dev(drive);
67 if (pair) 66 if (pair)
68 safe = min(safe, ide_get_best_pio_mode(pair, 255, 5)); 67 safe = min(safe, pair->pio_mode - XFER_PIO_0);
69 tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, safe); 68 tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, safe);
70} 69}
71 70
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c
index 64b58ecc3f0e..3c7367751873 100644
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -104,17 +104,17 @@ static void tx4939ide_writeb(u8 val, void __iomem *base, u32 reg)
104 104
105#define TX4939IDE_BASE(hwif) ((void __iomem *)(hwif)->extra_base) 105#define TX4939IDE_BASE(hwif) ((void __iomem *)(hwif)->extra_base)
106 106
107static void tx4939ide_set_pio_mode(ide_drive_t *drive, const u8 pio) 107static void tx4939ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
108{ 108{
109 ide_hwif_t *hwif = drive->hwif;
110 int is_slave = drive->dn; 109 int is_slave = drive->dn;
111 u32 mask, val; 110 u32 mask, val;
111 const u8 pio = drive->pio_mode - XFER_PIO_0;
112 u8 safe = pio; 112 u8 safe = pio;
113 ide_drive_t *pair; 113 ide_drive_t *pair;
114 114
115 pair = ide_get_pair_dev(drive); 115 pair = ide_get_pair_dev(drive);
116 if (pair) 116 if (pair)
117 safe = min(safe, ide_get_best_pio_mode(pair, 255, 4)); 117 safe = min(safe, pair->pio_mode - XFER_PIO_0);
118 /* 118 /*
119 * Update Command Transfer Mode for master/slave and Data 119 * Update Command Transfer Mode for master/slave and Data
120 * Transfer Mode for this drive. 120 * Transfer Mode for this drive.
@@ -125,10 +125,10 @@ static void tx4939ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
125 /* tx4939ide_tf_load_fixup() will set the Sys_Ctl register */ 125 /* tx4939ide_tf_load_fixup() will set the Sys_Ctl register */
126} 126}
127 127
128static void tx4939ide_set_dma_mode(ide_drive_t *drive, const u8 mode) 128static void tx4939ide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
129{ 129{
130 ide_hwif_t *hwif = drive->hwif;
131 u32 mask, val; 130 u32 mask, val;
131 const u8 mode = drive->dma_mode;
132 132
133 /* Update Data Transfer Mode for this drive. */ 133 /* Update Data Transfer Mode for this drive. */
134 if (mode >= XFER_UDMA_0) 134 if (mode >= XFER_UDMA_0)
diff --git a/drivers/ide/umc8672.c b/drivers/ide/umc8672.c
index 60f936e2319c..47adcd09cb26 100644
--- a/drivers/ide/umc8672.c
+++ b/drivers/ide/umc8672.c
@@ -104,10 +104,11 @@ static void umc_set_speeds(u8 speeds[])
104 speeds[0], speeds[1], speeds[2], speeds[3]); 104 speeds[0], speeds[1], speeds[2], speeds[3]);
105} 105}
106 106
107static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio) 107static void umc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
108{ 108{
109 ide_hwif_t *hwif = drive->hwif, *mate = hwif->mate; 109 ide_hwif_t *mate = hwif->mate;
110 unsigned long uninitialized_var(flags); 110 unsigned long uninitialized_var(flags);
111 const u8 pio = drive->pio_mode - XFER_PIO_0;
111 112
112 printk("%s: setting umc8672 to PIO mode%d (speed %d)\n", 113 printk("%s: setting umc8672 to PIO mode%d (speed %d)\n",
113 drive->name, pio, pio_to_umc[pio]); 114 drive->name, pio, pio_to_umc[pio]);
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index 028de26a25fe..e65d010b708d 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -6,7 +6,7 @@
6 * vt8235, vt8237, vt8237a 6 * vt8235, vt8237, vt8237a
7 * 7 *
8 * Copyright (c) 2000-2002 Vojtech Pavlik 8 * Copyright (c) 2000-2002 Vojtech Pavlik
9 * Copyright (c) 2007 Bartlomiej Zolnierkiewicz 9 * Copyright (c) 2007-2010 Bartlomiej Zolnierkiewicz
10 * 10 *
11 * Based on the work of: 11 * Based on the work of:
12 * Michel Aubry 12 * Michel Aubry
@@ -54,6 +54,11 @@
54#define VIA_NO_UNMASK 0x08 /* Doesn't work with IRQ unmasking on */ 54#define VIA_NO_UNMASK 0x08 /* Doesn't work with IRQ unmasking on */
55#define VIA_BAD_ID 0x10 /* Has wrong vendor ID (0x1107) */ 55#define VIA_BAD_ID 0x10 /* Has wrong vendor ID (0x1107) */
56#define VIA_BAD_AST 0x20 /* Don't touch Address Setup Timing */ 56#define VIA_BAD_AST 0x20 /* Don't touch Address Setup Timing */
57#define VIA_SATA_PATA 0x80 /* SATA/PATA combined configuration */
58
59enum {
60 VIA_IDFLAG_SINGLE = (1 << 1), /* single channel controller */
61};
57 62
58/* 63/*
59 * VIA SouthBridge chips. 64 * VIA SouthBridge chips.
@@ -67,11 +72,13 @@ static struct via_isa_bridge {
67 u8 udma_mask; 72 u8 udma_mask;
68 u8 flags; 73 u8 flags;
69} via_isa_bridges[] = { 74} via_isa_bridges[] = {
70 { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, 75 { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
71 { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, 76 { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
72 { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, 77 { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
78 { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
73 { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, 79 { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
74 { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, 80 { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
81 { "vt6415", PCI_DEVICE_ID_VIA_6410, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST },
75 { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, 82 { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
76 { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, 83 { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
77 { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, 84 { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
@@ -92,6 +99,7 @@ static struct via_isa_bridge {
92 { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO }, 99 { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO },
93 { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK }, 100 { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK },
94 { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, 101 { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
102 { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
95 { NULL } 103 { NULL }
96}; 104};
97 105
@@ -102,6 +110,7 @@ struct via82cxxx_dev
102{ 110{
103 struct via_isa_bridge *via_config; 111 struct via_isa_bridge *via_config;
104 unsigned int via_80w; 112 unsigned int via_80w;
113 u8 cached_device[2];
105}; 114};
106 115
107/** 116/**
@@ -137,30 +146,45 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
137 case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break; 146 case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break;
138 case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; 147 case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
139 case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; 148 case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
140 default: return;
141 } 149 }
142 150
143 pci_write_config_byte(dev, VIA_UDMA_TIMING + (3 - dn), t); 151 /* Set UDMA unless device is not UDMA capable */
152 if (vdev->via_config->udma_mask) {
153 u8 udma_etc;
154
155 pci_read_config_byte(dev, VIA_UDMA_TIMING + 3 - dn, &udma_etc);
156
157 /* clear transfer mode bit */
158 udma_etc &= ~0x20;
159
160 if (timing->udma) {
161 /* preserve 80-wire cable detection bit */
162 udma_etc &= 0x10;
163 udma_etc |= t;
164 }
165
166 pci_write_config_byte(dev, VIA_UDMA_TIMING + 3 - dn, udma_etc);
167 }
144} 168}
145 169
146/** 170/**
147 * via_set_drive - configure transfer mode 171 * via_set_drive - configure transfer mode
172 * @hwif: port
148 * @drive: Drive to set up 173 * @drive: Drive to set up
149 * @speed: desired speed
150 * 174 *
151 * via_set_drive() computes timing values configures the chipset to 175 * via_set_drive() computes timing values configures the chipset to
152 * a desired transfer mode. It also can be called by upper layers. 176 * a desired transfer mode. It also can be called by upper layers.
153 */ 177 */
154 178
155static void via_set_drive(ide_drive_t *drive, const u8 speed) 179static void via_set_drive(ide_hwif_t *hwif, ide_drive_t *drive)
156{ 180{
157 ide_hwif_t *hwif = drive->hwif;
158 ide_drive_t *peer = ide_get_pair_dev(drive); 181 ide_drive_t *peer = ide_get_pair_dev(drive);
159 struct pci_dev *dev = to_pci_dev(hwif->dev); 182 struct pci_dev *dev = to_pci_dev(hwif->dev);
160 struct ide_host *host = pci_get_drvdata(dev); 183 struct ide_host *host = pci_get_drvdata(dev);
161 struct via82cxxx_dev *vdev = host->host_priv; 184 struct via82cxxx_dev *vdev = host->host_priv;
162 struct ide_timing t, p; 185 struct ide_timing t, p;
163 unsigned int T, UT; 186 unsigned int T, UT;
187 const u8 speed = drive->dma_mode;
164 188
165 T = 1000000000 / via_clock; 189 T = 1000000000 / via_clock;
166 190
@@ -175,7 +199,7 @@ static void via_set_drive(ide_drive_t *drive, const u8 speed)
175 ide_timing_compute(drive, speed, &t, T, UT); 199 ide_timing_compute(drive, speed, &t, T, UT);
176 200
177 if (peer) { 201 if (peer) {
178 ide_timing_compute(peer, peer->current_speed, &p, T, UT); 202 ide_timing_compute(peer, peer->pio_mode, &p, T, UT);
179 ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); 203 ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
180 } 204 }
181 205
@@ -184,22 +208,24 @@ static void via_set_drive(ide_drive_t *drive, const u8 speed)
184 208
185/** 209/**
186 * via_set_pio_mode - set host controller for PIO mode 210 * via_set_pio_mode - set host controller for PIO mode
211 * @hwif: port
187 * @drive: drive 212 * @drive: drive
188 * @pio: PIO mode number
189 * 213 *
190 * A callback from the upper layers for PIO-only tuning. 214 * A callback from the upper layers for PIO-only tuning.
191 */ 215 */
192 216
193static void via_set_pio_mode(ide_drive_t *drive, const u8 pio) 217static void via_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
194{ 218{
195 via_set_drive(drive, XFER_PIO_0 + pio); 219 drive->dma_mode = drive->pio_mode;
220 via_set_drive(hwif, drive);
196} 221}
197 222
198static struct via_isa_bridge *via_config_find(struct pci_dev **isa) 223static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
199{ 224{
200 struct via_isa_bridge *via_config; 225 struct via_isa_bridge *via_config;
201 226
202 for (via_config = via_isa_bridges; via_config->id; via_config++) 227 for (via_config = via_isa_bridges;
228 via_config->id != PCI_DEVICE_ID_VIA_ANON; via_config++)
203 if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA + 229 if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA +
204 !!(via_config->flags & VIA_BAD_ID), 230 !!(via_config->flags & VIA_BAD_ID),
205 via_config->id, NULL))) { 231 via_config->id, NULL))) {
@@ -362,6 +388,9 @@ static u8 via82cxxx_cable_detect(ide_hwif_t *hwif)
362 if (via_cable_override(pdev)) 388 if (via_cable_override(pdev))
363 return ATA_CBL_PATA40_SHORT; 389 return ATA_CBL_PATA40_SHORT;
364 390
391 if ((vdev->via_config->flags & VIA_SATA_PATA) && hwif->channel == 0)
392 return ATA_CBL_SATA;
393
365 if ((vdev->via_80w >> hwif->channel) & 1) 394 if ((vdev->via_80w >> hwif->channel) & 1)
366 return ATA_CBL_PATA80; 395 return ATA_CBL_PATA80;
367 else 396 else
@@ -374,10 +403,66 @@ static const struct ide_port_ops via_port_ops = {
374 .cable_detect = via82cxxx_cable_detect, 403 .cable_detect = via82cxxx_cable_detect,
375}; 404};
376 405
406static void via_write_devctl(ide_hwif_t *hwif, u8 ctl)
407{
408 struct via82cxxx_dev *vdev = hwif->host->host_priv;
409
410 outb(ctl, hwif->io_ports.ctl_addr);
411 outb(vdev->cached_device[hwif->channel], hwif->io_ports.device_addr);
412}
413
414static void __via_dev_select(ide_drive_t *drive, u8 select)
415{
416 ide_hwif_t *hwif = drive->hwif;
417 struct via82cxxx_dev *vdev = hwif->host->host_priv;
418
419 outb(select, hwif->io_ports.device_addr);
420 vdev->cached_device[hwif->channel] = select;
421}
422
423static void via_dev_select(ide_drive_t *drive)
424{
425 __via_dev_select(drive, drive->select | ATA_DEVICE_OBS);
426}
427
428static void via_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
429{
430 ide_hwif_t *hwif = drive->hwif;
431 struct ide_io_ports *io_ports = &hwif->io_ports;
432
433 if (valid & IDE_VALID_FEATURE)
434 outb(tf->feature, io_ports->feature_addr);
435 if (valid & IDE_VALID_NSECT)
436 outb(tf->nsect, io_ports->nsect_addr);
437 if (valid & IDE_VALID_LBAL)
438 outb(tf->lbal, io_ports->lbal_addr);
439 if (valid & IDE_VALID_LBAM)
440 outb(tf->lbam, io_ports->lbam_addr);
441 if (valid & IDE_VALID_LBAH)
442 outb(tf->lbah, io_ports->lbah_addr);
443 if (valid & IDE_VALID_DEVICE)
444 __via_dev_select(drive, tf->device);
445}
446
447const struct ide_tp_ops via_tp_ops = {
448 .exec_command = ide_exec_command,
449 .read_status = ide_read_status,
450 .read_altstatus = ide_read_altstatus,
451 .write_devctl = via_write_devctl,
452
453 .dev_select = via_dev_select,
454 .tf_load = via_tf_load,
455 .tf_read = ide_tf_read,
456
457 .input_data = ide_input_data,
458 .output_data = ide_output_data,
459};
460
377static const struct ide_port_info via82cxxx_chipset __devinitdata = { 461static const struct ide_port_info via82cxxx_chipset __devinitdata = {
378 .name = DRV_NAME, 462 .name = DRV_NAME,
379 .init_chipset = init_chipset_via82cxxx, 463 .init_chipset = init_chipset_via82cxxx,
380 .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } }, 464 .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
465 .tp_ops = &via_tp_ops,
381 .port_ops = &via_port_ops, 466 .port_ops = &via_port_ops,
382 .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST | 467 .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST |
383 IDE_HFLAG_POST_SET_MODE | 468 IDE_HFLAG_POST_SET_MODE |
@@ -402,11 +487,6 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
402 * Find the ISA bridge and check we know what it is. 487 * Find the ISA bridge and check we know what it is.
403 */ 488 */
404 via_config = via_config_find(&isa); 489 via_config = via_config_find(&isa);
405 if (!via_config->id) {
406 printk(KERN_WARNING DRV_NAME " %s: unknown chipset, skipping\n",
407 pci_name(dev));
408 return -ENODEV;
409 }
410 490
411 /* 491 /*
412 * Print the boot message. 492 * Print the boot message.
@@ -436,10 +516,13 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
436 via_clock = 33333; 516 via_clock = 33333;
437 } 517 }
438 518
439 if (idx == 0) 519 if (idx == 1)
440 d.host_flags |= IDE_HFLAG_NO_AUTODMA;
441 else
442 d.enablebits[1].reg = d.enablebits[0].reg = 0; 520 d.enablebits[1].reg = d.enablebits[0].reg = 0;
521 else
522 d.host_flags |= IDE_HFLAG_NO_AUTODMA;
523
524 if (idx == VIA_IDFLAG_SINGLE)
525 d.host_flags |= IDE_HFLAG_SINGLE;
443 526
444 if ((via_config->flags & VIA_NO_UNMASK) == 0) 527 if ((via_config->flags & VIA_NO_UNMASK) == 0)
445 d.host_flags |= IDE_HFLAG_UNMASK_IRQS; 528 d.host_flags |= IDE_HFLAG_UNMASK_IRQS;
@@ -475,8 +558,9 @@ static const struct pci_device_id via_pci_tbl[] = {
475 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 }, 558 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 },
476 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 }, 559 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 },
477 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 }, 560 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 },
478 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), 0 }, 561 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), VIA_IDFLAG_SINGLE },
479 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 }, 562 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 },
563 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6415), 1 },
480 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 }, 564 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 },
481 { 0, }, 565 { 0, },
482}; 566};
@@ -504,6 +588,6 @@ static void __exit via_ide_exit(void)
504module_init(via_ide_init); 588module_init(via_ide_init);
505module_exit(via_ide_exit); 589module_exit(via_ide_exit);
506 590
507MODULE_AUTHOR("Vojtech Pavlik, Michel Aubry, Jeff Garzik, Andre Hedrick"); 591MODULE_AUTHOR("Vojtech Pavlik, Bartlomiej Zolnierkiewicz, Michel Aubry, Jeff Garzik, Andre Hedrick");
508MODULE_DESCRIPTION("PCI driver module for VIA IDE"); 592MODULE_DESCRIPTION("PCI driver module for VIA IDE");
509MODULE_LICENSE("GPL"); 593MODULE_LICENSE("GPL");
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 0ec612959042..97e6ab435184 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -515,6 +515,8 @@ struct ide_drive_s {
515 u8 init_speed; /* transfer rate set at boot */ 515 u8 init_speed; /* transfer rate set at boot */
516 u8 current_speed; /* current transfer rate set */ 516 u8 current_speed; /* current transfer rate set */
517 u8 desired_speed; /* desired transfer rate set */ 517 u8 desired_speed; /* desired transfer rate set */
518 u8 pio_mode; /* for ->set_pio_mode _only_ */
519 u8 dma_mode; /* for ->dma_pio_mode _only_ */
518 u8 dn; /* now wide spread use */ 520 u8 dn; /* now wide spread use */
519 u8 acoustic; /* acoustic management */ 521 u8 acoustic; /* acoustic management */
520 u8 media; /* disk, cdrom, tape, floppy, ... */ 522 u8 media; /* disk, cdrom, tape, floppy, ... */
@@ -622,8 +624,8 @@ extern const struct ide_tp_ops default_tp_ops;
622 */ 624 */
623struct ide_port_ops { 625struct ide_port_ops {
624 void (*init_dev)(ide_drive_t *); 626 void (*init_dev)(ide_drive_t *);
625 void (*set_pio_mode)(ide_drive_t *, const u8); 627 void (*set_pio_mode)(struct hwif_s *, ide_drive_t *);
626 void (*set_dma_mode)(ide_drive_t *, const u8); 628 void (*set_dma_mode)(struct hwif_s *, ide_drive_t *);
627 int (*reset_poll)(ide_drive_t *); 629 int (*reset_poll)(ide_drive_t *);
628 void (*pre_reset)(ide_drive_t *); 630 void (*pre_reset)(ide_drive_t *);
629 void (*resetproc)(ide_drive_t *); 631 void (*resetproc)(ide_drive_t *);
@@ -1494,7 +1496,6 @@ int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
1494#ifdef CONFIG_IDE_XFER_MODE 1496#ifdef CONFIG_IDE_XFER_MODE
1495int ide_scan_pio_blacklist(char *); 1497int ide_scan_pio_blacklist(char *);
1496const char *ide_xfer_verbose(u8); 1498const char *ide_xfer_verbose(u8);
1497u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
1498int ide_pio_need_iordy(ide_drive_t *, const u8); 1499int ide_pio_need_iordy(ide_drive_t *, const u8);
1499int ide_set_pio_mode(ide_drive_t *, u8); 1500int ide_set_pio_mode(ide_drive_t *, u8);
1500int ide_set_dma_mode(ide_drive_t *, u8); 1501int ide_set_dma_mode(ide_drive_t *, u8);