[ARM] S3C24XX: Split map.h into plat-s3c24xx and mach-s3c2410

Split the map.h definitions into common S3C24XX code by
adding arch/arm/plat-s3c24xx/include/plat/map.h and
altering the machine specific header for the S3C24A0.

As we add a new <plat/map.h> we move the original one
in arch/arm/plat-s3c include directory to be called
map-base.h to distinguish the two files.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

5 files changed, 111 insertions, 81 deletions

diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 6e08594d7162..6b30361a0805 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -13,34 +13,20 @@
 #ifndef __ASM_ARCH_MAP_H
 #define __ASM_ARCH_MAP_H
 
+#include <plat/map-base.h>
 #include <plat/map.h>
 
 #define S3C2410_ADDR(x)         S3C_ADDR(x)
 
-/* interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C24XX_VA_IRQ     S3C_VA_IRQ
-#define S3C2410_PA_IRQ     (0x4A000000)
-#define S3C24XX_SZ_IRQ     SZ_1M
-
-/* memory controller registers */
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
 /* USB host controller */
 #define S3C2410_PA_USBHOST (0x49000000)
-#define S3C24XX_SZ_USBHOST SZ_1M
 
 /* DMA controller */
 #define S3C2410_PA_DMA     (0x4B000000)
 #define S3C24XX_SZ_DMA     SZ_1M
 
 /* Clock and Power management */
-#define S3C24XX_VA_CLKPWR  S3C_VA_SYS
 #define S3C2410_PA_CLKPWR  (0x4C000000)
-#define S3C24XX_SZ_CLKPWR  SZ_1M
 
 /* LCD controller */
 #define S3C2410_PA_LCD     (0x4D000000)
@@ -48,48 +34,12 @@
 
 /* NAND flash controller */
 #define S3C2410_PA_NAND    (0x4E000000)
-#define S3C24XX_SZ_NAND    SZ_1M
-
-/* UARTs */
-#define S3C24XX_VA_UART    S3C_VA_UART
-#define S3C2410_PA_UART    (0x50000000)
-#define S3C24XX_SZ_UART    SZ_1M
-
-/* Timers */
-#define S3C24XX_VA_TIMER   S3C_VA_TIMER
-#define S3C2410_PA_TIMER   (0x51000000)
-#define S3C24XX_SZ_TIMER   SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV  (0x52000000)
-#define S3C24XX_SZ_USBDEV  SZ_1M
-
-/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
 
 /* IIC hardware controller */
 #define S3C2410_PA_IIC     (0x54000000)
-#define S3C24XX_SZ_IIC     SZ_1M
 
 /* IIS controller */
 #define S3C2410_PA_IIS     (0x55000000)
-#define S3C24XX_SZ_IIS     SZ_1M
-
-/* GPIO ports */
-
-/* the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 maping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO    (0x56000000)
-#define S3C24XX_VA_GPIO    ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C24XX_SZ_GPIO    SZ_1M
 
 /* RTC */
 #define S3C2410_PA_RTC     (0x57000000)
@@ -97,15 +47,12 @@
 
 /* ADC */
 #define S3C2410_PA_ADC     (0x58000000)
-#define S3C24XX_SZ_ADC     SZ_1M
 
 /* SPI */
 #define S3C2410_PA_SPI     (0x59000000)
-#define S3C24XX_SZ_SPI     SZ_1M
 
 /* SDI */
 #define S3C2410_PA_SDI     (0x5A000000)
-#define S3C24XX_SZ_SDI     SZ_1M
 
 /* CAMIF */
 #define S3C2440_PA_CAMIF   (0x4F000000)
@@ -120,13 +67,6 @@
 #define S3C2443_PA_HSMMC   (0x4A800000)
 #define S3C2443_SZ_HSMMC   (256)
 
-/* ISA style IO, for each machine to sort out mappings for, if it
- * implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
-
 /* physical addresses of all the chip-select areas */
 
 #define S3C2410_CS0 (0x00000000)
@@ -158,21 +98,7 @@
 #define S3C24XX_PA_RTC      S3C2410_PA_RTC
 #define S3C24XX_PA_ADC      S3C2410_PA_ADC
 #define S3C24XX_PA_SPI      S3C2410_PA_SPI
-
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
+#define S3C24XX_PA_SDI      S3C2410_PA_SDI
+#define S3C24XX_PA_NAND     S3C2410_PA_NAND
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
index 65a146fd78ec..2ce1839de4ee 100644
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -14,6 +14,9 @@
 #ifndef __ASM_ARCH_24A0_MAP_H
 #define __ASM_ARCH_24A0_MAP_H __FILE__
 
+#include <plat/map-base.h>
+#include <plat/map.h>
+
 #define S3C24A0_PA_IO_BASE      (0x40000000)
 #define S3C24A0_PA_CLKPWR       (0x40000000)
 #define S3C24A0_PA_IRQ          (0x40200000)
@@ -74,5 +77,7 @@
 #define S3C24XX_PA_RTC          S3C24A0_PA_RTC
 #define S3C24XX_PA_ADC          S3C24A0_PA_ADC
 #define S3C24XX_PA_SPI          S3C24A0_PA_SPI
+#define S3C24XX_PA_SDI          S3C24A0_PA_SDI
+#define S3C24XX_PA_NAND         S3C24A0_PA_NAND
 
 #endif /* __ASM_ARCH_24A0_MAP_H */
diff --git a/arch/arm/plat-s3c/include/plat/map.h b/arch/arm/plat-s3c/include/plat/map-base.h
index b84289d32a54..b84289d32a54 100644
--- a/arch/arm/plat-s3c/include/plat/map.h
+++ b/arch/arm/plat-s3c/include/plat/map-base.h
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index adf535aaf43a..ea445850ff47 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -192,8 +192,8 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
 
 static struct resource s3c_nand_resource[] = {
         [0] = {
-                .start = S3C2410_PA_NAND,
-                .end   = S3C2410_PA_NAND + S3C24XX_SZ_NAND - 1,
+                .start = S3C24XX_PA_NAND,
+                .end   = S3C24XX_PA_NAND + S3C24XX_SZ_NAND - 1,
                 .flags = IORESOURCE_MEM,
         }
 };
@@ -382,8 +382,8 @@ struct platform_device s3c_device_adc = {
 
 static struct resource s3c_sdi_resource[] = {
         [0] = {
-                .start = S3C2410_PA_SDI,
-                .end   = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1,
+                .start = S3C24XX_PA_SDI,
+                .end   = S3C24XX_PA_SDI + S3C24XX_SZ_SDI - 1,
                 .flags = IORESOURCE_MEM,
         },
         [1] = {
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
new file mode 100644
index 000000000000..6222ba8341d4
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -0,0 +1,99 @@
+/* linux/include/asm-arm/plat-s3c24xx/map.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S3C24XX_MAP_H
+#define __ASM_PLAT_S3C24XX_MAP_H
+
+/* interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C24XX_VA_IRQ     S3C_VA_IRQ
+#define S3C2410_PA_IRQ     (0x4A000000)
+#define S3C24XX_SZ_IRQ     SZ_1M
+
+/* memory controller registers */
+#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
+#define S3C2410_PA_MEMCTRL (0x48000000)
+#define S3C24XX_SZ_MEMCTRL SZ_1M
+
+/* UARTs */
+#define S3C24XX_VA_UART    S3C_VA_UART
+#define S3C2410_PA_UART    (0x50000000)
+#define S3C24XX_SZ_UART    SZ_1M
+
+/* Timers */
+#define S3C24XX_VA_TIMER   S3C_VA_TIMER
+#define S3C2410_PA_TIMER   (0x51000000)
+#define S3C24XX_SZ_TIMER   SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_VA_CLKPWR  S3C_VA_SYS
+#define S3C24XX_SZ_CLKPWR  SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV  (0x52000000)
+#define S3C24XX_SZ_USBDEV  SZ_1M
+
+/* Watchdog */
+#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
+#define S3C2410_PA_WATCHDOG (0x53000000)
+#define S3C24XX_SZ_WATCHDOG SZ_1M
+
+/* Standard size definitions for peripheral blocks. */
+
+#define S3C24XX_SZ_IIC          SZ_1M
+#define S3C24XX_SZ_IIS          SZ_1M
+#define S3C24XX_SZ_ADC          SZ_1M
+#define S3C24XX_SZ_SPI          SZ_1M
+#define S3C24XX_SZ_SDI          SZ_1M
+#define S3C24XX_SZ_NAND         SZ_1M
+#define S3C24XX_SZ_USBHOST      SZ_1M
+
+/* GPIO ports */
+
+/* the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 maping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO    (0x56000000)
+#define S3C24XX_VA_GPIO    ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C24XX_SZ_GPIO    SZ_1M
+
+
+/* ISA style IO, for each machine to sort out mappings for, if it
+ * implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#endif /* __ASM_PLAT_S3C24XX_MAP_H */