Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

899 files changed, 11924 insertions, 5470 deletions

diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt
index 923f9ddee8f6..f3355b6812df 100644
--- a/Documentation/kbuild/kbuild.txt
+++ b/Documentation/kbuild/kbuild.txt
@@ -3,7 +3,7 @@ Environment variables
 KCPPFLAGS
 --------------------------------------------------
 Additional options to pass when preprocessing. The preprocessing options
-will be used in all cases where kbuild do preprocessing including
+will be used in all cases where kbuild does preprocessing including
 building C files and assembler files.
 
 KAFLAGS
@@ -16,7 +16,7 @@ Additional options to the C compiler.
 
 KBUILD_VERBOSE
 --------------------------------------------------
-Set the kbuild verbosity. Can be assinged same values as "V=...".
+Set the kbuild verbosity. Can be assigned same values as "V=...".
 See make help for the full list.
 Setting "V=..." takes precedence over KBUILD_VERBOSE.
 
@@ -35,14 +35,14 @@ KBUILD_OUTPUT
 --------------------------------------------------
 Specify the output directory when building the kernel.
 The output directory can also be specificed using "O=...".
-Setting "O=..." takes precedence over KBUILD_OUTPUT
+Setting "O=..." takes precedence over KBUILD_OUTPUT.
 
 ARCH
 --------------------------------------------------
 Set ARCH to the architecture to be built.
 In most cases the name of the architecture is the same as the
 directory name found in the arch/ directory.
-But some architectures suach as x86 and sparc has aliases.
+But some architectures such as x86 and sparc have aliases.
 x86: i386 for 32 bit, x86_64 for 64 bit
 sparc: sparc for 32 bit, sparc64 for 64 bit
 
@@ -63,7 +63,7 @@ CF is often used on the command-line like this:
 INSTALL_PATH
 --------------------------------------------------
 INSTALL_PATH specifies where to place the updated kernel and system map
-images. Default is /boot, but you can set it to other values
+images. Default is /boot, but you can set it to other values.
 
 
 MODLIB
@@ -90,7 +90,7 @@ INSTALL_MOD_STRIP will used as the options to the strip command.
 
 INSTALL_FW_PATH
 --------------------------------------------------
-INSTALL_FW_PATH specify where to install the firmware blobs.
+INSTALL_FW_PATH specifies where to install the firmware blobs.
 The default value is:
 
     $(INSTALL_MOD_PATH)/lib/firmware
@@ -99,7 +99,7 @@ The value can be overridden in which case the default value is ignored.
 
 INSTALL_HDR_PATH
 --------------------------------------------------
-INSTALL_HDR_PATH specify where to install user space headers when
+INSTALL_HDR_PATH specifies where to install user space headers when
 executing "make headers_*".
 The default value is:
 
@@ -112,22 +112,23 @@ The value can be overridden in which case the default value is ignored.
 
 KBUILD_MODPOST_WARN
 --------------------------------------------------
-KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined
-symbols in the final module linking stage.
+KBUILD_MODPOST_WARN can be set to avoid errors in case of undefined
+symbols in the final module linking stage. It changes such errors
+into warnings.
 
-KBUILD_MODPOST_FINAL
+KBUILD_MODPOST_NOFINAL
 --------------------------------------------------
 KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules.
-This is solely usefull to speed up test compiles.
+This is solely useful to speed up test compiles.
 
 KBUILD_EXTRA_SYMBOLS
 --------------------------------------------------
-For modules use symbols from another modules.
+For modules that use symbols from other modules.
 See more details in modules.txt.
 
 ALLSOURCE_ARCHS
 --------------------------------------------------
-For tags/TAGS/cscope targets, you can specify more than one archs
-to be included in the databases, separated by blankspace. e.g.
+For tags/TAGS/cscope targets, you can specify more than one arch
+to be included in the databases, separated by blank space. E.g.:
 
     $ make ALLSOURCE_ARCHS="x86 mips arm" tags
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 8511d3532c27..d8362cf9909e 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -577,9 +577,6 @@ and is between 256 and 4096 characters. It is defined in the file
                         a memory unit (amount[KMG]). See also
                         Documentation/kdump/kdump.txt for a example.
 
-        cs4232=         [HW,OSS]
-                        Format: <io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>
-
         cs89x0_dma=     [HW,NET]
                         Format: <dma>
 
@@ -732,10 +729,6 @@ and is between 256 and 4096 characters. It is defined in the file
                         Default value is 0.
                         Value can be changed at runtime via /selinux/enforce.
 
-        es1371=         [HW,OSS]
-                        Format: <spdif>,[<nomix>,[<amplifier>]]
-                        See also header of sound/oss/es1371.c.
-
         ether=          [HW,NET] Ethernet cards parameters
                         This option is obsoleted by the "netdev=" option, which
                         has equivalent usage. See its documentation for details.
diff --git a/Documentation/networking/netconsole.txt b/Documentation/networking/netconsole.txt
index 3c2f2b328638..8d022073e3ef 100644
--- a/Documentation/networking/netconsole.txt
+++ b/Documentation/networking/netconsole.txt
@@ -51,7 +51,8 @@ Built-in netconsole starts immediately after the TCP stack is
 initialized and attempts to bring up the supplied dev at the supplied
 address.
 
-The remote host can run either 'netcat -u -l -p <port>' or syslogd.
+The remote host can run either 'netcat -u -l -p <port>',
+'nc -l -u <port>' or syslogd.
 
 Dynamic reconfiguration:
 ========================
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 64eb1100eec1..0f5d26bea80f 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -349,6 +349,7 @@ STAC92HD73*
 STAC92HD83*
 ===========
   ref           Reference board
+  mic-ref       Reference board with power managment for ports
 
 STAC9872
 ========
diff --git a/MAINTAINERS b/MAINTAINERS
index 3fe4dc2c2564..d992d407197b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2102,7 +2102,8 @@ M:	khali@linux-fr.org
 P:      Ben Dooks (embedded platforms)
 M:      ben-linux@fluff.org
 L:      linux-i2c@vger.kernel.org
-T:      quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/
+W:      http://i2c.wiki.kernel.org/
+T:      quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
 S:      Maintained
 
 I2C-TINY-USB DRIVER
diff --git a/Makefile b/Makefile
index 207303da3971..cf9e20dac86e 100644
--- a/Makefile
+++ b/Makefile
@@ -213,6 +213,10 @@ endif
 # Where to locate arch specific headers
 hdr-arch  := $(SRCARCH)
 
+ifeq ($(ARCH),m68knommu)
+       hdr-arch  := m68k
+endif
+
 KCONFIG_CONFIG  ?= .config
 
 # SHELL used by kbuild
@@ -606,25 +610,20 @@ export	INSTALL_PATH ?= /boot
 MODLIB  = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
 export MODLIB
 
-strip-symbols := $(srctree)/scripts/strip-symbols \
-                 $(wildcard $(srctree)/arch/$(ARCH)/scripts/strip-symbols)
-
 #
-# INSTALL_MOD_STRIP, if defined, will cause modules to be stripped while
-# they get installed.  If INSTALL_MOD_STRIP is '1', then the default
-# options (see below) will be used.  Otherwise, INSTALL_MOD_STRIP will
-# be used as the option(s) to the objcopy command.
+#  INSTALL_MOD_STRIP, if defined, will cause modules to be
+#  stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
+#  the default option --strip-debug will be used.  Otherwise,
+#  INSTALL_MOD_STRIP will used as the options to the strip command.
+
 ifdef INSTALL_MOD_STRIP
 ifeq ($(INSTALL_MOD_STRIP),1)
-mod_strip_cmd = $(OBJCOPY) --strip-debug
-ifeq ($(CONFIG_KALLSYMS_ALL),$(CONFIG_KALLSYMS_STRIP_GENERATED))
-mod_strip_cmd += --wildcard $(addprefix --strip-symbols ,$(strip-symbols))
-endif
+mod_strip_cmd = $(STRIP) --strip-debug
 else
-mod_strip_cmd = $(OBJCOPY) $(INSTALL_MOD_STRIP)
+mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
 endif # INSTALL_MOD_STRIP=1
 else
-mod_strip_cmd = false
+mod_strip_cmd = true
 endif # INSTALL_MOD_STRIP
 export mod_strip_cmd
 
@@ -754,7 +753,6 @@ last_kallsyms := 2
 endif
 
 kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
-kallsyms.h := $(wildcard include/config/kallsyms/*.h) $(wildcard include/config/kallsyms/*/*.h)
 
 define verify_kallsyms
         $(Q)$(if $($(quiet)cmd_sysmap),                                      \
@@ -779,41 +777,24 @@ endef
 
 # Generate .S file with all kernel symbols
 quiet_cmd_kallsyms = KSYM    $@
-      cmd_kallsyms = { test $* -eq 0 || $(NM) -n $<; } \
-                     | $(KALLSYMS) $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) >$@
+      cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
+                     $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
 
-quiet_cmd_kstrip = STRIP   $@
-      cmd_kstrip = $(OBJCOPY) --wildcard $(addprefix --strip$(if $(CONFIG_RELOCATABLE),-unneeded)-symbols ,$(filter %/scripts/strip-symbols,$^)) $< $@
-
-$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): KBUILD_AFLAGS += -Wa,--strip-local-absolute
-$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): %.o: %.S scripts FORCE
+.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
         $(call if_changed_dep,as_o_S)
 
-ifeq ($(CONFIG_KALLSYMS_STRIP_GENERATED),y)
-strip-ext := .stripped
-endif
-
-.tmp_kallsyms%.S: .tmp_vmlinux%$(strip-ext) $(KALLSYMS) $(kallsyms.h)
+.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
         $(call cmd,kallsyms)
 
-# make -jN seems to have problems with intermediate files, see bug #3330.
-.SECONDARY: $(foreach n,1 2 3,.tmp_vmlinux$(n).stripped)
-.tmp_vmlinux%.stripped: .tmp_vmlinux% $(strip-symbols) $(kallsyms.h)
-        $(call cmd,kstrip)
-
-ifneq ($(CONFIG_DEBUG_INFO),y)
-.tmp_vmlinux%: LDFLAGS_vmlinux += -S
-endif
 # .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
-.tmp_vmlinux%: $(vmlinux-lds) $(vmlinux-all) FORCE
-        $(if $(filter 1,$*),$(call if_changed_rule,ksym_ld),$(call if_changed,vmlinux__))
+.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
+        $(call if_changed_rule,ksym_ld)
 
-.tmp_vmlinux0$(strip-ext):
-        $(Q)echo "placeholder" >$@
+.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
+        $(call if_changed,vmlinux__)
 
-.tmp_vmlinux1: .tmp_kallsyms0.o
-.tmp_vmlinux2: .tmp_kallsyms1.o
-.tmp_vmlinux3: .tmp_kallsyms2.o
+.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
+        $(call if_changed,vmlinux__)
 
 # Needs to visit scripts/ before $(KALLSYMS) can be used.
 $(KALLSYMS): scripts ;
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index 17a17b49a45b..1037bba18329 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -24,6 +24,15 @@
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
 
+/*
+ * Find the correct struct clk for the device and connection ID.
+ * We do slightly fuzzy matching here:
+ *  An entry with a NULL ID is assumed to be a wildcard.
+ *  If an entry has a device ID, it must match
+ *  If an entry has a connection ID, it must match
+ * Then we take the most specific entry - with the following
+ * order of precidence: dev+con > dev only > con only.
+ */
 static struct clk *clk_find(const char *dev_id, const char *con_id)
 {
         struct clk_lookup *p;
@@ -31,13 +40,17 @@ static struct clk *clk_find(const char *dev_id, const char *con_id)
         int match, best = 0;
 
         list_for_each_entry(p, &clocks, node) {
-                if ((p->dev_id && !dev_id) || (p->con_id && !con_id))
-                        continue;
                 match = 0;
-                if (p->dev_id)
-                        match += 2 * (strcmp(p->dev_id, dev_id) == 0);
-                if (p->con_id)
-                        match += 1 * (strcmp(p->con_id, con_id) == 0);
+                if (p->dev_id) {
+                        if (!dev_id || strcmp(p->dev_id, dev_id))
+                                continue;
+                        match += 2;
+                }
+                if (p->con_id) {
+                        if (!con_id || strcmp(p->con_id, con_id))
+                                continue;
+                        match += 1;
+                }
                 if (match == 0)
                         continue;
 
diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig
index ce909586a34f..f7a272cb3da0 100644
--- a/arch/arm/configs/afeb9260_defconfig
+++ b/arch/arm/configs/afeb9260_defconfig
@@ -719,8 +719,8 @@ CONFIG_I2C_GPIO=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=y
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -744,7 +744,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig
index 2c4aa11f0b0d..764732529ea3 100644
--- a/arch/arm/configs/ams_delta_defconfig
+++ b/arch/arm/configs/ams_delta_defconfig
@@ -767,7 +767,7 @@ CONFIG_I2C_OMAP=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
index bf97801a1068..bc6bd9f6174d 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -676,7 +676,7 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -703,7 +703,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 868fb7b9530b..238b218394e3 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -636,7 +636,7 @@ CONFIG_I2C_GPIO=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index de43fc675616..9f7a99ace514 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -610,7 +610,7 @@ CONFIG_I2C_GPIO=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index 38e6a0abeb4e..e0ee7060f9aa 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -582,7 +582,7 @@ CONFIG_I2C_GPIO=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 93b779f94b41..01d1ef97d8be 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -660,7 +660,7 @@ CONFIG_I2C_GPIO=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -687,7 +687,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index a7ddd94363ca..036a126725c1 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -670,7 +670,7 @@ CONFIG_I2C_GPIO=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -697,7 +697,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index df0d6ee672b3..7e018a04c31b 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -665,7 +665,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index 811bebbdc784..237a2a6a8517 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -566,7 +566,7 @@ CONFIG_I2C_GPIO=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -593,7 +593,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index 85c80f723d8e..a19e824cf7f8 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -723,7 +723,7 @@ CONFIG_I2C_GPIO=m
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index b2bbf217c707..80222feb7dad 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -750,7 +750,7 @@ CONFIG_I2C_ELEKTOR=m
 # Other I2C Chip support
 #
 # CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig
index f945105d6cd6..8448108347cf 100644
--- a/arch/arm/configs/cam60_defconfig
+++ b/arch/arm/configs/cam60_defconfig
@@ -722,7 +722,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -749,7 +749,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index 46f1c9dc350c..227da0843ead 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -763,8 +763,8 @@ CONFIG_I2C_PXA=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/colibri_defconfig b/arch/arm/configs/colibri_defconfig
index c3e3418ed4fe..744086fff414 100644
--- a/arch/arm/configs/colibri_defconfig
+++ b/arch/arm/configs/colibri_defconfig
@@ -801,7 +801,7 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index 98765438048d..d6cd165e9310 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -982,8 +982,8 @@ CONFIG_I2C_PXA=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1008,7 +1008,7 @@ CONFIG_SPI_PXA2XX=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index 67e65e4f0cdc..29f68c2effe6 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -679,7 +679,7 @@ CONFIG_I2C_GPIO=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index 99702146c9fc..f7b60ceed6c7 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -704,7 +704,7 @@ CONFIG_I2C_CHARDEV=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig
index cfeb817ad21a..ca520733bdb0 100644
--- a/arch/arm/configs/ecbat91_defconfig
+++ b/arch/arm/configs/ecbat91_defconfig
@@ -721,7 +721,7 @@ CONFIG_I2C_GPIO=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -747,7 +747,7 @@ CONFIG_SPI_AT91=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 
 #
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 21aa013793c6..3f89d5f25bce 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -681,7 +681,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index 2a84d557adc2..d5ee16e6abf3 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -877,7 +877,7 @@ CONFIG_I2C_PXA=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -900,7 +900,7 @@ CONFIG_SPI_PXA2XX=m
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_HAVE_GPIO_LIB=y
diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig
index 299dc22294a0..6ace512fa101 100644
--- a/arch/arm/configs/footbridge_defconfig
+++ b/arch/arm/configs/footbridge_defconfig
@@ -801,7 +801,7 @@ CONFIG_I2C=m
 #
 # Other I2C Chip support
 #
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
index 482e57061053..89c17761726b 100644
--- a/arch/arm/configs/iop13xx_defconfig
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -744,7 +744,7 @@ CONFIG_I2C_IOP3XX=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index 8612f58e1056..d70177b38f5f 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -847,7 +847,7 @@ CONFIG_I2C_IOP3XX=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index 8b0098d19d08..eec488298267 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -746,7 +746,7 @@ CONFIG_I2C_IOP3XX=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig
index 84680db6c615..57526c15e854 100644
--- a/arch/arm/configs/ixp2000_defconfig
+++ b/arch/arm/configs/ixp2000_defconfig
@@ -768,7 +768,7 @@ CONFIG_I2C_IXP2000=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig
index 4a2f7b2372db..ef97561ed75b 100644
--- a/arch/arm/configs/ixp23xx_defconfig
+++ b/arch/arm/configs/ixp23xx_defconfig
@@ -900,7 +900,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index fc14932e3abd..95cd8dfb5f1e 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -1083,7 +1083,7 @@ CONFIG_I2C_IXP4XX=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index 6dd95a2c8d5d..9f92fc527f59 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -603,7 +603,7 @@ CONFIG_I2C_GPIO=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index ab8b1e0d0dac..4bc38078d580 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -905,8 +905,8 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -930,7 +930,7 @@ CONFIG_SPI_ORION=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/loki_defconfig b/arch/arm/configs/loki_defconfig
index 17da7c3b3d53..b720fcffbcd4 100644
--- a/arch/arm/configs/loki_defconfig
+++ b/arch/arm/configs/loki_defconfig
@@ -654,7 +654,7 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -675,7 +675,7 @@ CONFIG_SPI_MASTER=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 4d11678584db..73ba62b71063 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -678,7 +678,7 @@ CONFIG_I2C_PXA=m
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig
index 3b4ecf2a90dd..cc3b06ee24f9 100644
--- a/arch/arm/configs/msm_defconfig
+++ b/arch/arm/configs/msm_defconfig
@@ -580,7 +580,7 @@ CONFIG_I2C_MSM=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 CONFIG_SENSORS_PCA9633=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index d38ebf8721a4..83c817f31bcc 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -832,7 +832,7 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig
index 568ef1770d5f..672f6db06a52 100644
--- a/arch/arm/configs/n770_defconfig
+++ b/arch/arm/configs/n770_defconfig
@@ -767,7 +767,7 @@ CONFIG_I2C_OMAP=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -798,7 +798,7 @@ CONFIG_SPI_OMAP_UWIRE=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_TSC2101 is not set
 # CONFIG_SPI_TSC2102 is not set
 # CONFIG_SPI_TSC210X is not set
diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig
index 325f1e105f69..e0e4e98b5aa2 100644
--- a/arch/arm/configs/neocore926_defconfig
+++ b/arch/arm/configs/neocore926_defconfig
@@ -774,8 +774,8 @@ CONFIG_I2C_CHARDEV=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -798,7 +798,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig
index 92ccdc6492f7..d81ea219c934 100644
--- a/arch/arm/configs/neponset_defconfig
+++ b/arch/arm/configs/neponset_defconfig
@@ -737,7 +737,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # Other I2C Chip support
 #
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index e042d27eae16..4c6fb7e959df 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -687,8 +687,8 @@ CONFIG_I2C_OMAP=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig
index 09543f4de5bc..b54ad2e2da36 100644
--- a/arch/arm/configs/omap3_pandora_defconfig
+++ b/arch/arm/configs/omap3_pandora_defconfig
@@ -713,8 +713,8 @@ CONFIG_I2C_OMAP=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -740,7 +740,7 @@ CONFIG_SPI_OMAP24XX=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig
index b0617c0da2a1..640e9afc4630 100644
--- a/arch/arm/configs/omap_2430sdp_defconfig
+++ b/arch/arm/configs/omap_2430sdp_defconfig
@@ -710,7 +710,7 @@ CONFIG_I2C_OMAP=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -743,7 +743,7 @@ CONFIG_SPI_MASTER=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_TSC2101 is not set
 # CONFIG_SPI_TSC2102 is not set
 # CONFIG_SPI_TSC210X is not set
diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig
index bb39dfc72d69..ac7adf34c54a 100644
--- a/arch/arm/configs/omap_apollon_2420_defconfig
+++ b/arch/arm/configs/omap_apollon_2420_defconfig
@@ -612,7 +612,7 @@ CONFIG_SPI_OMAP24XX=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_TSC2101 is not set
 # CONFIG_SPI_TSC2102 is not set
 # CONFIG_SPI_TSC210X is not set
diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig
index 4b1c252f2091..ccdc661b5856 100644
--- a/arch/arm/configs/omap_generic_1510_defconfig
+++ b/arch/arm/configs/omap_generic_1510_defconfig
@@ -637,7 +637,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig
index fc66f019d56c..0c42c8955047 100644
--- a/arch/arm/configs/omap_generic_1610_defconfig
+++ b/arch/arm/configs/omap_generic_1610_defconfig
@@ -641,7 +641,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index c03507202f3c..74dbdc644d32 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -700,7 +700,7 @@ CONFIG_I2C_OMAP=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -731,7 +731,7 @@ CONFIG_SPI_OMAP_UWIRE=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_TSC2101=y
 # CONFIG_SPI_TSC2102 is not set
 # CONFIG_SPI_TSC210X is not set
diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig
index 5bc89185a64f..a4aab8e4c29b 100644
--- a/arch/arm/configs/omap_h4_2420_defconfig
+++ b/arch/arm/configs/omap_h4_2420_defconfig
@@ -681,7 +681,7 @@ CONFIG_I2C_OMAP=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig
index 55b2611bd90a..0cfe363e3365 100644
--- a/arch/arm/configs/omap_innovator_1510_defconfig
+++ b/arch/arm/configs/omap_innovator_1510_defconfig
@@ -631,7 +631,7 @@ CONFIG_I2C_BOARDINFO=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
index b77d054169ee..aa9d34feddc6 100644
--- a/arch/arm/configs/omap_ldp_defconfig
+++ b/arch/arm/configs/omap_ldp_defconfig
@@ -629,8 +629,8 @@ CONFIG_I2C_OMAP=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -656,7 +656,7 @@ CONFIG_SPI_OMAP24XX=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig
index b68e0144cab5..6b3b5c610da0 100644
--- a/arch/arm/configs/omap_osk_5912_defconfig
+++ b/arch/arm/configs/omap_osk_5912_defconfig
@@ -711,7 +711,7 @@ CONFIG_I2C_OMAP=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index 418ca2febbe3..f8701fadb600 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -698,7 +698,7 @@ CONFIG_I2C_CHARDEV=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index b2456ca544c9..a8ee6984a09e 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -886,8 +886,8 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig
index 49200967a153..a57f9e4124fa 100644
--- a/arch/arm/configs/overo_defconfig
+++ b/arch/arm/configs/overo_defconfig
@@ -858,8 +858,8 @@ CONFIG_I2C_OMAP=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -885,7 +885,7 @@ CONFIG_SPI_OMAP24XX=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig
index 6361922e71c1..08e14068fff7 100644
--- a/arch/arm/configs/palmz71_defconfig
+++ b/arch/arm/configs/palmz71_defconfig
@@ -554,7 +554,7 @@ CONFIG_SPI_OMAP_UWIRE=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_TSC2101 is not set
 # CONFIG_SPI_TSC2102 is not set
 # CONFIG_SPI_TSC210X is not set
diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig
index 3245f8f33e0a..a0dc37c05dea 100644
--- a/arch/arm/configs/palmz72_defconfig
+++ b/arch/arm/configs/palmz72_defconfig
@@ -527,8 +527,8 @@ CONFIG_I2C_PXA=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -552,7 +552,7 @@ CONFIG_SPI_MASTER=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig
index 17b9b2469570..05ad96a43b1d 100644
--- a/arch/arm/configs/pcm027_defconfig
+++ b/arch/arm/configs/pcm027_defconfig
@@ -606,7 +606,7 @@ CONFIG_I2C_PXA=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/pcm038_defconfig
index 6b798c215ca8..41429a00f58c 100644
--- a/arch/arm/configs/pcm038_defconfig
+++ b/arch/arm/configs/pcm038_defconfig
@@ -604,7 +604,7 @@ CONFIG_I2C_BOARDINFO=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -626,7 +626,7 @@ CONFIG_SPI_BITBANG=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_HAVE_GPIO_LIB=y
diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig
index 59e4463c2da2..9018f0f298aa 100644
--- a/arch/arm/configs/picotux200_defconfig
+++ b/arch/arm/configs/picotux200_defconfig
@@ -744,7 +744,7 @@ CONFIG_I2C_GPIO=m
 #
 CONFIG_SENSORS_DS1337=m
 CONFIG_SENSORS_DS1374=m
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 CONFIG_SENSORS_PCA9539=m
 CONFIG_SENSORS_PCF8591=m
diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig
index 811b8f60d19d..67b5f1e15f4a 100644
--- a/arch/arm/configs/pnx4008_defconfig
+++ b/arch/arm/configs/pnx4008_defconfig
@@ -915,7 +915,7 @@ CONFIG_I2C_ALGOPCA=m
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_SENSORS_PCA9539 is not set
 CONFIG_SENSORS_PCF8591=m
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index 5cbd81589647..cd1d717903ac 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -687,7 +687,7 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -714,7 +714,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index f62d1817d2c6..a29d61fe4c6a 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -590,7 +590,7 @@ CONFIG_I2C_ACORN=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 35faaea8623e..65a583ee5df8 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -923,7 +923,7 @@ CONFIG_I2C_SIMTEC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -950,7 +950,7 @@ CONFIG_SPI_S3C24XX_GPIO=m
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_HAVE_GPIO_LIB=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index cf3c1b5d7048..2e8fa50e9a09 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -465,8 +465,8 @@ CONFIG_I2C_S3C2410=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=y
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 4df5b4db2aa0..745c68ffb885 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -977,8 +977,8 @@ CONFIG_I2C_PXA=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1003,7 +1003,7 @@ CONFIG_SPI_PXA2XX=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig
index 853dcdd9f2e0..25b007ff8bab 100644
--- a/arch/arm/configs/sx1_defconfig
+++ b/arch/arm/configs/sx1_defconfig
@@ -610,7 +610,7 @@ CONFIG_I2C_OMAP=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 9033d147f052..b6f838197816 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -948,7 +948,7 @@ CONFIG_I2C_PXA_SLAVE=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
index fcb4aaabd439..fd7774033d64 100644
--- a/arch/arm/configs/usb-a9260_defconfig
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -676,7 +676,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig
index b786e0407e8e..e7c19dd92557 100644
--- a/arch/arm/configs/usb-a9263_defconfig
+++ b/arch/arm/configs/usb-a9263_defconfig
@@ -668,7 +668,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index 8355f88f7292..b11c5da3996c 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -611,7 +611,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index d01fecb8673e..30f463d2fa8a 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -860,8 +860,8 @@ CONFIG_I2C_PXA=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/arm/configs/xm_x2xx_defconfig b/arch/arm/configs/xm_x2xx_defconfig
index f891364deceb..1039f366bf8d 100644
--- a/arch/arm/configs/xm_x2xx_defconfig
+++ b/arch/arm/configs/xm_x2xx_defconfig
@@ -1009,8 +1009,8 @@ CONFIG_I2C_PXA=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig
index a9f41c24c9dc..9192e5977674 100644
--- a/arch/arm/configs/yl9200_defconfig
+++ b/arch/arm/configs/yl9200_defconfig
@@ -682,7 +682,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index fe182a85159c..c6fb32c36c52 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -12,6 +12,7 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 
 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 static struct musb_hdrc_eps_bits musb_eps[] = {
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index b240c5f861da..0d784a795092 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -37,16 +37,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/gpio-switch.h>
 #include <mach/mux.h>
+#include <mach/dma.h>
 #include <mach/tc.h>
 #include <mach/nand.h>
 #include <mach/irda.h>
 #include <mach/usb.h>
 #include <mach/keypad.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 
 static int h2_keymap[] = {
         KEY(0, 0, KEY_LEFT),
@@ -292,41 +290,6 @@ static struct platform_device h2_lcd_device = {
         .id             = -1,
 };
 
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-        .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-        .spcr1 = RINTM(3) | RRST,
-        .rcr2  = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-                RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
-        .rcr1  = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-        .xcr2  = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-                XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
-        .xcr1  = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-        .srgr1 = FWID(15),
-        .srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
-
-        .pcr0  = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
-        /*.pcr0 = CLKXP | CLKRP,*/        /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-        .name                   = "H2 TSC2101",
-        .mcbsp_regs_alsa        = &mcbsp_regs,
-        .codec_configure_dev    = NULL, /* tsc2101_configure, */
-        .codec_set_samplerate   = NULL, /* tsc2101_set_samplerate, */
-        .codec_clock_setup      = NULL, /* tsc2101_clock_setup, */
-        .codec_clock_on         = NULL, /* tsc2101_clock_on, */
-        .codec_clock_off        = NULL, /* tsc2101_clock_off, */
-        .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
-};
-
-static struct platform_device h2_mcbsp1_device = {
-        .name   = "omap_alsa_mcbsp",
-        .id     = 1,
-        .dev = {
-                .platform_data  = &alsa_config,
-        },
-};
-
 static struct platform_device *h2_devices[] __initdata = {
         &h2_nor_device,
         &h2_nand_device,
@@ -334,7 +297,6 @@ static struct platform_device *h2_devices[] __initdata = {
         &h2_irda_device,
         &h2_kp_device,
         &h2_lcd_device,
-        &h2_mcbsp1_device,
 };
 
 static void __init h2_init_smc91x(void)
@@ -409,11 +371,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = {
 
 #define H2_NAND_RB_GPIO_PIN     62
 
-static int h2_nand_dev_ready(struct omap_nand_platform_data *data)
-{
-        return gpio_get_value(H2_NAND_RB_GPIO_PIN);
-}
-
 static void __init h2_init(void)
 {
         /* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 5157eea9be35..bf08b6ad22ee 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -49,8 +49,6 @@
 #include <mach/keypad.h>
 #include <mach/dma.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 
 #define H3_TS_GPIO      48
 
@@ -387,41 +385,6 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
         },
 };
 
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-        .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-        .spcr1 = RINTM(3) | RRST,
-        .rcr2  = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-                RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
-        .rcr1  = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-        .xcr2  = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-                XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
-        .xcr1  = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-        .srgr1 = FWID(15),
-        .srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
-
-        .pcr0  = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
-        /*.pcr0 = CLKXP | CLKRP,*/        /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-        .name                   = "H3 TSC2101",
-        .mcbsp_regs_alsa        = &mcbsp_regs,
-        .codec_configure_dev    = NULL, /* tsc2101_configure, */
-        .codec_set_samplerate   = NULL, /* tsc2101_set_samplerate, */
-        .codec_clock_setup      = NULL, /* tsc2101_clock_setup, */
-        .codec_clock_on         = NULL, /* tsc2101_clock_on, */
-        .codec_clock_off        = NULL, /* tsc2101_clock_off, */
-        .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
-};
-
-static struct platform_device h3_mcbsp1_device = {
-        .name   = "omap_alsa_mcbsp",
-        .id     = 1,
-        .dev = {
-                .platform_data  = &alsa_config,
-        },
-};
-
 static struct platform_device *devices[] __initdata = {
         &nor_device,
         &nand_device,
@@ -430,7 +393,6 @@ static struct platform_device *devices[] __initdata = {
         &h3_irda_device,
         &h3_kp_device,
         &h3_lcd_device,
-        &h3_mcbsp1_device,
 };
 
 static struct omap_usb_config h3_usb_config __initdata = {
@@ -472,18 +434,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = {
         },
 };
 
-static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
-        {
-                .name                   = "mmc_slot",
-                .gpio                   = OMAP_MPUIO(1),
-                .type                   = OMAP_GPIO_SWITCH_TYPE_COVER,
-                .debounce_rising        = 100,
-                .debounce_falling       = 0,
-                .notify                 = h3_mmc_slot_cover_handler,
-                .notify_data            = NULL,
-        },
-};
-
 #define H3_NAND_RB_GPIO_PIN     10
 
 static int nand_dev_ready(struct omap_nand_platform_data *data)
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index af2fb9070083..071cd02a734e 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -37,8 +37,6 @@
 #include <mach/usb.h>
 #include <mach/keypad.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 #include <mach/mmc.h>
 
 static int innovator_keymap[] = {
@@ -115,42 +113,6 @@ static struct platform_device innovator_flash_device = {
         .resource       = &innovator_flash_resource,
 };
 
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-        .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-        .spcr1 = RINTM(3) | RRST,
-        .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-            RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
-        .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-        .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-            XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
-        .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-        .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
-        .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
-        /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
-        .pcr0 = CLKXP | CLKRP,  /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-        .name                   = "OMAP Innovator AIC23",
-        .mcbsp_regs_alsa        = &mcbsp_regs,
-        .codec_configure_dev    = NULL, /* aic23_configure, */
-        .codec_set_samplerate   = NULL, /* aic23_set_samplerate, */
-        .codec_clock_setup      = NULL, /* aic23_clock_setup, */
-        .codec_clock_on         = NULL, /* aic23_clock_on, */
-        .codec_clock_off        = NULL, /* aic23_clock_off, */
-        .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device innovator_mcbsp1_device = {
-        .name   = "omap_alsa_mcbsp",
-        .id     = 1,
-        .dev = {
-                .platform_data  = &alsa_config,
-        },
-};
-
 static struct resource innovator_kp_resources[] = {
         [0] = {
                 .start  = INT_KEYBOARD,
@@ -227,7 +189,6 @@ static struct platform_device innovator1510_spi_device = {
 static struct platform_device *innovator1510_devices[] __initdata = {
         &innovator_flash_device,
         &innovator1510_smc91x_device,
-        &innovator_mcbsp1_device,
         &innovator_kp_device,
         &innovator1510_lcd_device,
         &innovator1510_spi_device,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 4970c402a594..af51e0b180f2 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -32,7 +32,6 @@
 #include <mach/keypad.h>
 #include <mach/common.h>
 #include <mach/dsp_common.h>
-#include <mach/aic23.h>
 #include <mach/omapfb.h>
 #include <mach/lcd_mipid.h>
 #include <mach/mmc.h>
@@ -261,6 +260,13 @@ static DEFINE_MUTEX(audio_pwr_lock);
  */
 static int audio_pwr_state = -1;
 
+static inline void aic23_power_up(void)
+{
+}
+static inline void aic23_power_down(void)
+{
+}
+
 /*
  * audio_pwr_up / down should be called under audio_pwr_lock
  */
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index ff9e67baa5c9..1a16ecb2ccc8 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -51,8 +51,6 @@
 #include <mach/mux.h>
 #include <mach/tc.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 
 static struct mtd_partition osk_partitions[] = {
         /* bootloader (U-Boot, etc) in first sector */
@@ -141,47 +139,10 @@ static struct platform_device osk5912_cf_device = {
         .resource       = osk5912_cf_resources,
 };
 
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-        .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-        .spcr1 = RINTM(3) | RRST,
-        .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-            RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
-        .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-        .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-            XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
-        .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-        .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
-        .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
-        /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
-        .pcr0 = CLKXP | CLKRP,  /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-        .name                   = "OSK AIC23",
-        .mcbsp_regs_alsa        = &mcbsp_regs,
-        .codec_configure_dev    = NULL, /* aic23_configure, */
-        .codec_set_samplerate   = NULL, /* aic23_set_samplerate, */
-        .codec_clock_setup      = NULL, /* aic23_clock_setup, */
-        .codec_clock_on         = NULL, /* aic23_clock_on, */
-        .codec_clock_off        = NULL, /* aic23_clock_off, */
-        .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device osk5912_mcbsp1_device = {
-        .name   = "omap_alsa_mcbsp",
-        .id     = 1,
-        .dev = {
-                .platform_data  = &alsa_config,
-        },
-};
-
 static struct platform_device *osk5912_devices[] __initdata = {
         &osk5912_flash_device,
         &osk5912_smc91x_device,
         &osk5912_cf_device,
-        &osk5912_mcbsp1_device,
 };
 
 static struct gpio_led tps_leds[] = {
@@ -259,8 +220,10 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = {
                 .platform_data  = &tps_board,
 
         },
+        {
+                I2C_BOARD_INFO("tlv320aic23", 0x1B),
+        },
         /* TODO when driver support is ready:
-         *  - aic23 audio chip at 0x1a
          *  - optionally on Mistral, ov9640 camera sensor at 0x30
          */
 };
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 75e32d35afd9..99f2b43f2541 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -42,8 +42,6 @@
 #include <mach/irda.h>
 #include <mach/keypad.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 
 static void __init omap_palmte_init_irq(void)
 {
@@ -195,15 +193,6 @@ static struct omap_usb_config palmte_usb_config __initdata = {
         .pins[0]        = 2,
 };
 
-static struct omap_mmc_config palmte_mmc_config __initdata = {
-        .mmc[0]         = {
-                .enabled        = 1,
-                .wp_pin         = PALMTE_MMC_WP_GPIO,
-                .power_pin      = PALMTE_MMC_POWER_GPIO,
-                .switch_pin     = PALMTE_MMC_SWITCH_GPIO,
-        },
-};
-
 static struct omap_lcd_config palmte_lcd_config __initdata = {
         .ctrl_name      = "internal",
 };
@@ -212,24 +201,6 @@ static struct omap_uart_config palmte_uart_config __initdata = {
         .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
 };
 
-static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = {
-        .spcr2  = FRST | GRST | XRST | XINTM(3),
-        .xcr2   = XDATDLY(1) | XFIG,
-        .xcr1   = XWDLEN1(OMAP_MCBSP_WORD_32),
-        .pcr0   = SCLKME | FSXP | CLKXP,
-};
-
-static struct omap_alsa_codec_config palmte_alsa_config = {
-        .name                   = "TSC2102 audio",
-        .mcbsp_regs_alsa        = &palmte_mcbsp1_regs,
-        .codec_configure_dev    = NULL, /* tsc2102_configure, */
-        .codec_set_samplerate   = NULL, /* tsc2102_set_samplerate, */
-        .codec_clock_setup      = NULL, /* tsc2102_clock_setup, */
-        .codec_clock_on         = NULL, /* tsc2102_clock_on, */
-        .codec_clock_off        = NULL, /* tsc2102_clock_off, */
-        .get_default_samplerate = NULL, /* tsc2102_get_default_samplerate, */
-};
-
 #ifdef CONFIG_APM
 /*
  * Values measured in 10 minute intervals averaged over 10 samples.
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 5c001afe8062..1cbc1275c95f 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -30,7 +30,6 @@
 #include <asm/mach/flash.h>
 
 #include <mach/led.h>
-#include <mach/mcbsp.h>
 #include <mach/gpio.h>
 #include <mach/mux.h>
 #include <mach/usb.h>
@@ -40,7 +39,6 @@
 #include <mach/irda.h>
 #include <mach/keypad.h>
 #include <mach/common.h>
-#include <mach/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -122,44 +120,6 @@ static struct platform_device palmtt_flash_device = {
         .resource       = &palmtt_flash_resource,
 };
 
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-        .spcr2          = FREE | FRST | GRST | XRST | XINTM(3),
-        .spcr1          = RINTM(3) | RRST,
-        .rcr2           = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-                                RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
-        .rcr1           = RFRLEN1(OMAP_MCBSP_WORD_8) |
-                                RWDLEN1(OMAP_MCBSP_WORD_16),
-        .xcr2           = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-                                XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
-        .xcr1           = XFRLEN1(OMAP_MCBSP_WORD_8) |
-                                XWDLEN1(OMAP_MCBSP_WORD_16),
-        .srgr1          = FWID(DEFAULT_BITPERSAMPLE - 1),
-        .srgr2          = GSYNC | CLKSP | FSGM |
-                                FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
-        .pcr0           = CLKXP | CLKRP,        /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-        .name                   = "PalmTT AIC23",
-        .mcbsp_regs_alsa        = &mcbsp_regs,
-        .codec_configure_dev    = NULL, /* aic23_configure, */
-        .codec_set_samplerate   = NULL, /* aic23_set_samplerate, */
-        .codec_clock_setup      = NULL, /* aic23_clock_setup, */
-        .codec_clock_on         = NULL, /* aic23_clock_on, */
-        .codec_clock_off        = NULL, /* aic23_clock_off, */
-        .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device palmtt_mcbsp1_device = {
-        .name   = "omap_alsa_mcbsp",
-        .id     = 1,
-        .dev    = {
-                .platform_data  = &alsa_config,
-        },
-};
-
 static struct resource palmtt_kp_resources[] = {
         [0] = {
                 .start  = INT_KEYBOARD,
@@ -257,7 +217,6 @@ static struct platform_device palmtt_led_device = {
 
 static struct platform_device *palmtt_devices[] __initdata = {
         &palmtt_flash_device,
-        &palmtt_mcbsp1_device,
         &palmtt_kp_device,
         &palmtt_lcd_device,
         &palmtt_irda_device,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index cc05257eb1cd..baf5efbfe3e8 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -32,7 +32,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/mcbsp.h>
 #include <mach/gpio.h>
 #include <mach/mux.h>
 #include <mach/usb.h>
@@ -179,41 +178,6 @@ static struct platform_device palmz71_spi_device = {
         .id     = -1,
 };
 
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-        .spcr2  = FREE | FRST | GRST | XRST | XINTM(3),
-        .spcr1  = RINTM(3) | RRST,
-        .rcr2   = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-                        RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
-        .rcr1   = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-        .xcr2   = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-                        XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
-        .xcr1   = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-        .srgr1  = FWID(DEFAULT_BITPERSAMPLE - 1),
-        .srgr2  = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
-        .pcr0   = CLKXP | CLKRP,        /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-        .name                   = "PalmZ71 AIC23",
-        .mcbsp_regs_alsa        = &mcbsp_regs,
-        .codec_configure_dev    = NULL, /* aic23_configure */
-        .codec_set_samplerate   = NULL, /* aic23_set_samplerate */
-        .codec_clock_setup      = NULL, /* aic23_clock_setup */
-        .codec_clock_on         = NULL, /* aic23_clock_on */
-        .codec_clock_off        = NULL, /* aic23_clock_off */
-        .get_default_samplerate = NULL, /* aic23_get_default_samplerate */
-};
-
-static struct platform_device palmz71_mcbsp1_device = {
-        .name   = "omap_alsa_mcbsp",
-        .id     = 1,
-        .dev = {
-                .platform_data = &alsa_config,
-        },
-};
-
 static struct omap_backlight_config palmz71_backlight_config = {
         .default_intensity      = 0xa0,
 };
@@ -229,7 +193,6 @@ static struct platform_device palmz71_backlight_device = {
 static struct platform_device *devices[] __initdata = {
         &palmz71_rom_device,
         &palmz71_kp_device,
-        &palmz71_mcbsp1_device,
         &palmz71_lcd_device,
         &palmz71_irda_device,
         &palmz71_spi_device,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 8171fe0ca082..28c76a1e71c0 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -34,13 +34,12 @@
 
 #include <mach/gpio.h>
 #include <mach/mux.h>
+#include <mach/dma.h>
 #include <mach/irda.h>
 #include <mach/usb.h>
 #include <mach/tc.h>
 #include <mach/board.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 #include <mach/keypad.h>
 
 /* Write to I2C device */
@@ -254,35 +253,6 @@ static struct platform_device sx1_irda_device = {
         .resource       = sx1_irda_resources,
 };
 
-/*----------- McBSP & Sound -------------------------*/
-
-/* Playback interface - McBSP1 */
-static struct omap_mcbsp_reg_cfg mcbsp1_regs = {
-        .spcr2  = XINTM(3),     /* SPCR2=30 */
-        .spcr1  = RINTM(3),     /* SPCR1=30 */
-        .rcr2   = 0,    /* RCR2 =00 */
-        .rcr1   = RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16),     /* RCR1=140 */
-        .xcr2   = 0,    /* XCR2 = 0 */
-        .xcr1   = XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16),     /* XCR1 = 140 */
-        .srgr1  = FWID(15) | CLKGDV(12),        /* SRGR1=0f0c */
-        .srgr2  = FSGM | FPER(31),      /* SRGR2=101f */
-        .pcr0   = FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
-                                                /* PCR0 =0f0f */
-};
-
-static struct omap_alsa_codec_config sx1_alsa_config = {
-        .name                   = "SX1 EGold",
-        .mcbsp_regs_alsa        = &mcbsp1_regs,
-};
-
-static struct platform_device sx1_mcbsp1_device = {
-        .name   = "omap_alsa_mcbsp",
-        .id     = 1,
-        .dev = {
-                .platform_data  = &sx1_alsa_config,
-        },
-};
-
 /*----------- MTD -------------------------*/
 
 static struct mtd_partition sx1_partitions[] = {
@@ -394,7 +364,6 @@ static struct platform_device *sx1_devices[] __initdata = {
         &sx1_flash_device,
         &sx1_kp_device,
         &sx1_lcd_device,
-        &sx1_mcbsp1_device,
         &sx1_irda_device,
 };
 /*-----------------------------------------*/
@@ -423,9 +392,9 @@ static void __init omap_sx1_init(void)
 
         /* turn on USB power */
         /* sx1_setusbpower(1); cant do it here because i2c is not ready */
-        omap_request_gpio(1);   /* A_IRDA_OFF */
-        omap_request_gpio(11);  /* A_SWITCH */
-        omap_request_gpio(15);  /* A_USB_ON */
+        gpio_request(1, "A_IRDA_OFF");
+        gpio_request(11, "A_SWITCH");
+        gpio_request(15, "A_USB_ON");
         gpio_direction_output(1, 1);    /*A_IRDA_OFF = 1 */
         gpio_direction_output(11, 0);   /*A_SWITCH = 0 */
         gpio_direction_output(15, 0);   /*A_USB_ON = 0 */
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index c224f3c64235..a7653542a2b0 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -22,7 +22,6 @@
 #include <linux/reboot.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
-#include <linux/irq.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 4474da7bc88a..ca7a0cc1707c 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
+#include <mach/irqs.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
 #include <mach/mux.h>
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index bf1e5d32c2a3..0a7b24ba1652 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -22,8 +22,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/onenand.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
 #include <linux/err.h>
@@ -282,65 +280,16 @@ static void __init apollon_led_init(void)
 {
         /* LED0 - AA10 */
         omap_cfg_reg(AA10_242X_GPIO13);
-        omap_request_gpio(LED0_GPIO13);
-        omap_set_gpio_direction(LED0_GPIO13, 0);
-        omap_set_gpio_dataout(LED0_GPIO13, 0);
+        gpio_request(LED0_GPIO13, "LED0");
+        gpio_direction_output(LED0_GPIO13, 0);
         /* LED1  - AA6 */
         omap_cfg_reg(AA6_242X_GPIO14);
-        omap_request_gpio(LED1_GPIO14);
-        omap_set_gpio_direction(LED1_GPIO14, 0);
-        omap_set_gpio_dataout(LED1_GPIO14, 0);
+        gpio_request(LED1_GPIO14, "LED1");
+        gpio_direction_output(LED1_GPIO14, 0);
         /* LED2  - AA4 */
         omap_cfg_reg(AA4_242X_GPIO15);
-        omap_request_gpio(LED2_GPIO15);
-        omap_set_gpio_direction(LED2_GPIO15, 0);
-        omap_set_gpio_dataout(LED2_GPIO15, 0);
-}
-
-static irqreturn_t apollon_sw_interrupt(int irq, void *ignored)
-{
-        static unsigned int led0, led1, led2;
-
-        if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16))
-                omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1);
-        else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17))
-                omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1);
-        else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58))
-                omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1);
-
-        return IRQ_HANDLED;
-}
-
-static void __init apollon_sw_init(void)
-{
-        /* Enter SW - Y11 */
-        omap_cfg_reg(Y11_242X_GPIO16);
-        omap_request_gpio(SW_ENTER_GPIO16);
-        gpio_direction_input(SW_ENTER_GPIO16);
-        /* Up SW - AA12 */
-        omap_cfg_reg(AA12_242X_GPIO17);
-        omap_request_gpio(SW_UP_GPIO17);
-        gpio_direction_input(SW_UP_GPIO17);
-        /* Down SW - AA8 */
-        omap_cfg_reg(AA8_242X_GPIO58);
-        omap_request_gpio(SW_DOWN_GPIO58);
-        gpio_direction_input(SW_DOWN_GPIO58);
-
-        set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING);
-        if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
-                                IRQF_SHARED, "enter sw",
-                                &apollon_sw_interrupt))
-                return;
-        set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING);
-        if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
-                                IRQF_SHARED, "up sw",
-                                &apollon_sw_interrupt))
-                return;
-        set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING);
-        if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
-                                IRQF_SHARED, "down sw",
-                                &apollon_sw_interrupt))
-                return;
+        gpio_request(LED2_GPIO15, "LED2");
+        gpio_direction_output(LED2_GPIO15, 0);
 }
 
 static void __init apollon_usb_init(void)
@@ -357,7 +306,6 @@ static void __init omap_apollon_init(void)
         u32 v;
 
         apollon_led_init();
-        apollon_sw_init();
         apollon_flash_init();
         apollon_usb_init();
 
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index aa6972781e4a..f6a13451d1fd 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -88,7 +88,7 @@ static inline void __init ldp_init_smc911x(void)
 
         ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
 
-        if (omap_request_gpio(eth_gpio) < 0) {
+        if (gpio_request(eth_gpio, "smc911x irq") < 0) {
                 printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
                                 eth_gpio);
                 return;
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 9e5ada01b5fa..38c88fbe658d 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -28,6 +28,8 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 
+#include <linux/i2c/twl4030.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -120,6 +122,9 @@ static int beagle_twl_gpio_setup(struct device *dev,
                 unsigned gpio, unsigned ngpio)
 {
         /* gpio + 0 is "mmc0_cd" (input/IRQ) */
+        omap_cfg_reg(AH8_34XX_GPIO29);
+        mmc[0].gpio_cd = gpio + 0;
+        twl4030_mmc_init(mmc);
 
         /* REVISIT: need ehci-omap hooks for external VBUS
          * power switch and overcurrent detect
@@ -304,10 +309,6 @@ static void __init omap3_beagle_init(void)
         omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
         omap_serial_init();
 
-        omap_cfg_reg(AH8_34XX_GPIO29);
-        mmc[0].gpio_cd = gpio + 0;
-        twl4030_mmc_init(mmc);
-
         omap_cfg_reg(J25_34XX_GPIO170);
         gpio_request(170, "DVI_nPD");
         /* REVISIT leave DVI powered down until it's needed ... */
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index acdc709901cd..e20023c9d15d 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
+#include <mach/irqs.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
 #include <mach/mux.h>
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index bdb5fd983b15..1601698b9800 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -68,7 +68,7 @@ mc_copy_user_page(void *from, void *to)
         : "r" (from), "r" (to), "I" (PAGE_SIZE / 64));
 }
 
-void v4_mc_copy_user_highpage(struct page *from, struct page *to,
+void v4_mc_copy_user_highpage(struct page *to, struct page *from,
         unsigned long vaddr)
 {
         void *kto = kmap_atomic(to, KM_USER1);
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 18373f73f2fc..9f88dd3be601 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -138,7 +138,7 @@ void __check_kvm_seq(struct mm_struct *mm)
  */
 static void unmap_area_sections(unsigned long virt, unsigned long size)
 {
-        unsigned long addr = virt, end = virt + (size & ~SZ_1M);
+        unsigned long addr = virt, end = virt + (size & ~(SZ_1M - 1));
         pgd_t *pgd;
 
         flush_cache_vunmap(addr, end);
@@ -337,10 +337,7 @@ void __iounmap(volatile void __iomem *io_addr)
         void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
 #ifndef CONFIG_SMP
         struct vm_struct **p, *tmp;
-#endif
-        unsigned int section_mapping = 0;
 
-#ifndef CONFIG_SMP
         /*
          * If this is a section based mapping we need to handle it
          * specially as the VM subsystem does not know how to handle
@@ -352,11 +349,8 @@ void __iounmap(volatile void __iomem *io_addr)
         for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) {
                 if ((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
                         if (tmp->flags & VM_ARM_SECTION_MAPPING) {
-                                *p = tmp->next;
                                 unmap_area_sections((unsigned long)tmp->addr,
                                                     tmp->size);
-                                kfree(tmp);
-                                section_mapping = 1;
                         }
                         break;
                 }
@@ -364,7 +358,6 @@ void __iounmap(volatile void __iomem *io_addr)
         write_unlock(&vmlist_lock);
 #endif
 
-        if (!section_mapping)
-                vunmap(addr);
+        vunmap(addr);
 }
 EXPORT_SYMBOL(__iounmap);
diff --git a/arch/arm/plat-mxc/include/mach/ipu.h b/arch/arm/plat-mxc/include/mach/ipu.h
new file mode 100644
index 000000000000..a9221f1cc1a0
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ipu.h
@@ -0,0 +1,181 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright (C) 2005-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IPU_H_
+#define _IPU_H_
+
+#include <linux/types.h>
+#include <linux/dmaengine.h>
+
+/* IPU DMA Controller channel definitions. */
+enum ipu_channel {
+        IDMAC_IC_0 = 0,         /* IC (encoding task) to memory */
+        IDMAC_IC_1 = 1,         /* IC (viewfinder task) to memory */
+        IDMAC_ADC_0 = 1,
+        IDMAC_IC_2 = 2,
+        IDMAC_ADC_1 = 2,
+        IDMAC_IC_3 = 3,
+        IDMAC_IC_4 = 4,
+        IDMAC_IC_5 = 5,
+        IDMAC_IC_6 = 6,
+        IDMAC_IC_7 = 7,         /* IC (sensor data) to memory */
+        IDMAC_IC_8 = 8,
+        IDMAC_IC_9 = 9,
+        IDMAC_IC_10 = 10,
+        IDMAC_IC_11 = 11,
+        IDMAC_IC_12 = 12,
+        IDMAC_IC_13 = 13,
+        IDMAC_SDC_0 = 14,       /* Background synchronous display data */
+        IDMAC_SDC_1 = 15,       /* Foreground data (overlay) */
+        IDMAC_SDC_2 = 16,
+        IDMAC_SDC_3 = 17,
+        IDMAC_ADC_2 = 18,
+        IDMAC_ADC_3 = 19,
+        IDMAC_ADC_4 = 20,
+        IDMAC_ADC_5 = 21,
+        IDMAC_ADC_6 = 22,
+        IDMAC_ADC_7 = 23,
+        IDMAC_PF_0 = 24,
+        IDMAC_PF_1 = 25,
+        IDMAC_PF_2 = 26,
+        IDMAC_PF_3 = 27,
+        IDMAC_PF_4 = 28,
+        IDMAC_PF_5 = 29,
+        IDMAC_PF_6 = 30,
+        IDMAC_PF_7 = 31,
+};
+
+/* Order significant! */
+enum ipu_channel_status {
+        IPU_CHANNEL_FREE,
+        IPU_CHANNEL_INITIALIZED,
+        IPU_CHANNEL_READY,
+        IPU_CHANNEL_ENABLED,
+};
+
+#define IPU_CHANNELS_NUM 32
+
+enum pixel_fmt {
+        /* 1 byte */
+        IPU_PIX_FMT_GENERIC,
+        IPU_PIX_FMT_RGB332,
+        IPU_PIX_FMT_YUV420P,
+        IPU_PIX_FMT_YUV422P,
+        IPU_PIX_FMT_YUV420P2,
+        IPU_PIX_FMT_YVU422P,
+        /* 2 bytes */
+        IPU_PIX_FMT_RGB565,
+        IPU_PIX_FMT_RGB666,
+        IPU_PIX_FMT_BGR666,
+        IPU_PIX_FMT_YUYV,
+        IPU_PIX_FMT_UYVY,
+        /* 3 bytes */
+        IPU_PIX_FMT_RGB24,
+        IPU_PIX_FMT_BGR24,
+        /* 4 bytes */
+        IPU_PIX_FMT_GENERIC_32,
+        IPU_PIX_FMT_RGB32,
+        IPU_PIX_FMT_BGR32,
+        IPU_PIX_FMT_ABGR32,
+        IPU_PIX_FMT_BGRA32,
+        IPU_PIX_FMT_RGBA32,
+};
+
+enum ipu_color_space {
+        IPU_COLORSPACE_RGB,
+        IPU_COLORSPACE_YCBCR,
+        IPU_COLORSPACE_YUV
+};
+
+/*
+ * Enumeration of IPU rotation modes
+ */
+enum ipu_rotate_mode {
+        /* Note the enum values correspond to BAM value */
+        IPU_ROTATE_NONE = 0,
+        IPU_ROTATE_VERT_FLIP = 1,
+        IPU_ROTATE_HORIZ_FLIP = 2,
+        IPU_ROTATE_180 = 3,
+        IPU_ROTATE_90_RIGHT = 4,
+        IPU_ROTATE_90_RIGHT_VFLIP = 5,
+        IPU_ROTATE_90_RIGHT_HFLIP = 6,
+        IPU_ROTATE_90_LEFT = 7,
+};
+
+struct ipu_platform_data {
+        unsigned int    irq_base;
+};
+
+/*
+ * Enumeration of DI ports for ADC.
+ */
+enum display_port {
+        DISP0,
+        DISP1,
+        DISP2,
+        DISP3
+};
+
+struct idmac_video_param {
+        unsigned short          in_width;
+        unsigned short          in_height;
+        uint32_t                in_pixel_fmt;
+        unsigned short          out_width;
+        unsigned short          out_height;
+        uint32_t                out_pixel_fmt;
+        unsigned short          out_stride;
+        bool                    graphics_combine_en;
+        bool                    global_alpha_en;
+        bool                    key_color_en;
+        enum display_port       disp;
+        unsigned short          out_left;
+        unsigned short          out_top;
+};
+
+/*
+ * Union of initialization parameters for a logical channel. So far only video
+ * parameters are used.
+ */
+union ipu_channel_param {
+        struct idmac_video_param video;
+};
+
+struct idmac_tx_desc {
+        struct dma_async_tx_descriptor  txd;
+        struct scatterlist              *sg;    /* scatterlist for this */
+        unsigned int                    sg_len; /* tx-descriptor. */
+        struct list_head                list;
+};
+
+struct idmac_channel {
+        struct dma_chan         dma_chan;
+        dma_cookie_t            completed;      /* last completed cookie           */
+        union ipu_channel_param params;
+        enum ipu_channel        link;   /* input channel, linked to the output     */
+        enum ipu_channel_status status;
+        void                    *client;        /* Only one client per channel     */
+        unsigned int            n_tx_desc;
+        struct idmac_tx_desc    *desc;          /* allocated tx-descriptors        */
+        struct scatterlist      *sg[2]; /* scatterlist elements in buffer-0 and -1 */
+        struct list_head        free_list;      /* free tx-descriptors             */
+        struct list_head        queue;          /* queued tx-descriptors           */
+        spinlock_t              lock;           /* protects sg[0,1], queue         */
+        struct mutex            chan_mutex; /* protects status, cookie, free_list  */
+        bool                    sec_chan_en;
+        int                     active_buffer;
+        unsigned int            eof_irq;
+        char                    eof_name[16];   /* EOF IRQ name for request_irq()  */
+};
+
+#define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd)
+#define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan)
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index e06d3cb0ee11..c02b8fc2d821 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -35,7 +35,15 @@
 #define MXC_BOARD_IRQ_START     (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
 #define MXC_BOARD_IRQS  16
 
-#define NR_IRQS         (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
+#define MXC_IPU_IRQ_START       (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
+
+#ifdef CONFIG_MX3_IPU_IRQS
+#define MX3_IPU_IRQS CONFIG_MX3_IPU_IRQS
+#else
+#define MX3_IPU_IRQS 0
+#endif
+
+#define NR_IRQS                 (MXC_IPU_IRQ_START + MX3_IPU_IRQS)
 
 extern void imx_irq_set_priority(unsigned char irq, unsigned char prio);
 
diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h
new file mode 100644
index 000000000000..e391a76ca87d
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx3fb.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MX3FB_H__
+#define __ASM_ARCH_MX3FB_H__
+
+#include <linux/device.h>
+#include <linux/fb.h>
+
+/* Proprietary FB_SYNC_ flags */
+#define FB_SYNC_OE_ACT_HIGH    0x80000000
+#define FB_SYNC_CLK_INVERT     0x40000000
+#define FB_SYNC_DATA_INVERT    0x20000000
+#define FB_SYNC_CLK_IDLE_EN    0x10000000
+#define FB_SYNC_SHARP_MODE     0x08000000
+#define FB_SYNC_SWAP_RGB       0x04000000
+#define FB_SYNC_CLK_SEL_EN     0x02000000
+
+/**
+ * struct mx3fb_platform_data - mx3fb platform data
+ *
+ * @dma_dev:   pointer to the dma-device, used for dma-slave connection
+ * @mode:      pointer to a platform-provided per mxc_register_fb() videomode
+ */
+struct mx3fb_platform_data {
+       struct device                   *dma_dev;
+       const char                      *name;
+       const struct fb_videomode       *mode;
+       int                             num_modes;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 692d2b495af3..e77373c39f8c 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -278,14 +278,11 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
                 u32 val;
 
                 val = dma_read(CCR(lch));
-                val &= ~(3 << 19);
-                if (dma_trigger > 63)
-                        val |= 1 << 20;
-                if (dma_trigger > 31)
-                        val |= 1 << 19;
-
-                val &= ~(0x1f);
-                val |= (dma_trigger & 0x1f);
+
+                /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
+                val &= ~((3 << 19) | 0x1f);
+                val |= (dma_trigger & ~0x1f) << 14;
+                val |= dma_trigger & 0x1f;
 
                 if (sync_mode & OMAP_DMA_SYNC_FRAME)
                         val |= 1 << 5;
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 07b6968a7d16..f856a90b264e 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1789,6 +1789,8 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 /* FIXME for at least omap2, show pullup/pulldown state */
 
                         irqstat = irq_desc[irq].status;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) ||   \
+                defined(CONFIG_ARCH_OMAP34XX)
                         if (is_in && ((bank->suspend_wakeup & mask)
                                         || irqstat & IRQ_TYPE_SENSE_MASK)) {
                                 char    *trigger = NULL;
@@ -1818,6 +1820,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
                                                 (bank->suspend_wakeup & mask)
                                                         ? " wakeup" : "");
                         }
+#endif
                         seq_printf(s, "\n");
                 }
 
diff --git a/arch/arm/plat-omap/include/mach/aic23.h b/arch/arm/plat-omap/include/mach/aic23.h
deleted file mode 100644
index 5ccedac77526..000000000000
--- a/arch/arm/plat-omap/include/mach/aic23.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/aic23.h
- *
- * Hardware definitions for TI TLV320AIC23 audio codec
- *
- * Copyright (C) 2002 RidgeRun, Inc.
- * Author: Steve Johnson
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_AIC23_H
-#define __ASM_ARCH_AIC23_H
-
-// Codec TLV320AIC23
-#define LEFT_LINE_VOLUME_ADDR           0x00
-#define RIGHT_LINE_VOLUME_ADDR          0x01
-#define LEFT_CHANNEL_VOLUME_ADDR        0x02
-#define RIGHT_CHANNEL_VOLUME_ADDR       0x03
-#define ANALOG_AUDIO_CONTROL_ADDR       0x04
-#define DIGITAL_AUDIO_CONTROL_ADDR      0x05
-#define POWER_DOWN_CONTROL_ADDR         0x06
-#define DIGITAL_AUDIO_FORMAT_ADDR       0x07
-#define SAMPLE_RATE_CONTROL_ADDR        0x08
-#define DIGITAL_INTERFACE_ACT_ADDR      0x09
-#define RESET_CONTROL_ADDR              0x0F
-
-// Left (right) line input volume control register
-#define LRS_ENABLED                     0x0100
-#define LIM_MUTED                       0x0080
-#define LIV_DEFAULT                     0x0017
-#define LIV_MAX                         0x001f
-#define LIV_MIN                         0x0000
-
-// Left (right) channel headphone volume control register
-#define LZC_ON                          0x0080
-#define LHV_DEFAULT                     0x0079
-#define LHV_MAX                         0x007f
-#define LHV_MIN                         0x0000
-
-// Analog audio path control register
-#define STA_REG(x)                      ((x)<<6)
-#define STE_ENABLED                     0x0020
-#define DAC_SELECTED                    0x0010
-#define BYPASS_ON                       0x0008
-#define INSEL_MIC                       0x0004
-#define MICM_MUTED                      0x0002
-#define MICB_20DB                       0x0001
-
-// Digital audio path control register
-#define DACM_MUTE                       0x0008
-#define DEEMP_32K                       0x0002
-#define DEEMP_44K                       0x0004
-#define DEEMP_48K                       0x0006
-#define ADCHP_ON                        0x0001
-
-// Power control down register
-#define DEVICE_POWER_OFF                0x0080
-#define CLK_OFF                         0x0040
-#define OSC_OFF                         0x0020
-#define OUT_OFF                         0x0010
-#define DAC_OFF                         0x0008
-#define ADC_OFF                         0x0004
-#define MIC_OFF                         0x0002
-#define LINE_OFF                        0x0001
-
-// Digital audio interface register
-#define MS_MASTER                       0x0040
-#define LRSWAP_ON                       0x0020
-#define LRP_ON                          0x0010
-#define IWL_16                          0x0000
-#define IWL_20                          0x0004
-#define IWL_24                          0x0008
-#define IWL_32                          0x000C
-#define FOR_I2S                         0x0002
-#define FOR_DSP                         0x0003
-
-// Sample rate control register
-#define CLKOUT_HALF                     0x0080
-#define CLKIN_HALF                      0x0040
-#define BOSR_384fs                      0x0002 // BOSR_272fs when in USB mode
-#define USB_CLK_ON                      0x0001
-#define SR_MASK                         0xf
-#define CLKOUT_SHIFT                    7
-#define CLKIN_SHIFT                     6
-#define SR_SHIFT                        2
-#define BOSR_SHIFT                      1
-
-// Digital interface register
-#define ACT_ON                          0x0001
-
-#define TLV320AIC23ID1                  (0x1a)  // cs low
-#define TLV320AIC23ID2                  (0x1b)  // cs high
-
-void aic23_power_up(void);
-void aic23_power_down(void);
-
-#endif /* __ASM_ARCH_AIC23_H */
diff --git a/arch/arm/plat-omap/include/mach/board-h3.h b/arch/arm/plat-omap/include/mach/board-h3.h
index 14909dc7858a..1888326da7ea 100644
--- a/arch/arm/plat-omap/include/mach/board-h3.h
+++ b/arch/arm/plat-omap/include/mach/board-h3.h
@@ -30,7 +30,9 @@
 /* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
 #define OMAP1710_ETHR_START             0x04000300
 
+#define H3_TPS_GPIO_BASE                (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#       define H3_TPS_GPIO_MMC_PWR_EN   (H3_TPS_GPIO_BASE + 4)
+
 extern void h3_mmc_init(void);
-extern void h3_mmc_slot_cover_handler(void *arg, int state);
 
 #endif /*  __ASM_ARCH_OMAP_H3_H */
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 04e68e88f134..8d9dfe314387 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -87,16 +87,6 @@ extern void omap_set_gpio_debounce_time(int gpio, int enable);
 #include <linux/errno.h>
 #include <asm-generic/gpio.h>
 
-static inline int omap_request_gpio(int gpio)
-{
-        return gpio_request(gpio, "FIXME");
-}
-
-static inline void omap_free_gpio(int gpio)
-{
-        gpio_free(gpio);
-}
-
 static inline int gpio_get_value(unsigned gpio)
 {
         return __gpio_get_value(gpio);
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 6a0d1a0a24a7..eef873db3d48 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -87,6 +87,10 @@
 #define OMAP_MCBSP_REG_XCERG    0x3A
 #define OMAP_MCBSP_REG_XCERH    0x3C
 
+/* Dummy defines, these are not available on omap1 */
+#define OMAP_MCBSP_REG_XCCR     0x00
+#define OMAP_MCBSP_REG_RCCR     0x00
+
 #define AUDIO_MCBSP_DATAWRITE   (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
 #define AUDIO_MCBSP_DATAREAD    (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
 
@@ -231,11 +235,16 @@
 #define XPBBLK(value)           ((value)<<7)    /* Bits 7:8 */
 
 /*********************** McBSP XCCR bit definitions *************************/
+#define EXTCLKGATE              0x8000
+#define PPCONNECT               0x4000
+#define DXENDLY(value)          ((value)<<12)   /* Bits 12:13 */
+#define XFULL_CYCLE             0x0800
 #define DILB                    0x0020
 #define XDMAEN                  0x0008
 #define XDISABLE                0x0001
 
 /********************** McBSP RCCR bit definitions *************************/
+#define RFULL_CYCLE             0x0800
 #define RDMAEN                  0x0008
 #define RDISABLE                0x0001
 
@@ -267,6 +276,8 @@ struct omap_mcbsp_reg_cfg {
         u16 rcerh;
         u16 xcerg;
         u16 xcerh;
+        u16 xccr;
+        u16 rccr;
 };
 
 typedef enum {
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index af33fc713e1a..f2401a831f99 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -173,6 +173,10 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
         OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2);
         OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
         OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
+        if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+                OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr);
+                OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr);
+        }
 }
 EXPORT_SYMBOL(omap_mcbsp_config);
 
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index add0485703b5..e278de6862ae 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -431,15 +431,6 @@ bad:
 
 /*-------------------------------------------------------------------------*/
 
-#if     defined(CONFIG_USB_GADGET_OMAP) || \
-        defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) || \
-        (defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG))
-static void usb_release(struct device *dev)
-{
-        /* normally not freed */
-}
-#endif
-
 #ifdef  CONFIG_USB_GADGET_OMAP
 
 static struct resource udc_resources[] = {
@@ -466,7 +457,6 @@ static struct platform_device udc_device = {
         .name           = "omap_udc",
         .id             = -1,
         .dev = {
-                .release                = usb_release,
                 .dma_mask               = &udc_dmamask,
                 .coherent_dma_mask      = 0xffffffff,
         },
@@ -497,7 +487,6 @@ static struct platform_device ohci_device = {
         .name                   = "ohci",
         .id                     = -1,
         .dev = {
-                .release                = usb_release,
                 .dma_mask               = &ohci_dmamask,
                 .coherent_dma_mask      = 0xffffffff,
         },
@@ -524,9 +513,6 @@ static struct resource otg_resources[] = {
 static struct platform_device otg_device = {
         .name           = "omap_otg",
         .id             = -1,
-        .dev = {
-                .release                = usb_release,
-        },
         .num_resources  = ARRAY_SIZE(otg_resources),
         .resource       = otg_resources,
 };
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index 164e2814ae78..574aca975334 100644
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -644,8 +644,8 @@ CONFIG_I2C_GPIO=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=m
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -670,7 +670,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig
index b0572d213826..86a45b5c9d0d 100644
--- a/arch/avr32/configs/atngw100_evklcd100_defconfig
+++ b/arch/avr32/configs/atngw100_evklcd100_defconfig
@@ -671,7 +671,7 @@ CONFIG_I2C_GPIO=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -699,7 +699,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_HAVE_GPIO_LIB=y
diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig
index c5b898d21075..a96b68ea5e83 100644
--- a/arch/avr32/configs/atngw100_evklcd101_defconfig
+++ b/arch/avr32/configs/atngw100_evklcd101_defconfig
@@ -671,7 +671,7 @@ CONFIG_I2C_GPIO=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -699,7 +699,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_HAVE_GPIO_LIB=y
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index c9dc64832a19..0abe90adb1a4 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -663,8 +663,8 @@ CONFIG_I2C_GPIO=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=m
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -689,7 +689,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
index 29ea1327b498..101972f40f07 100644
--- a/arch/avr32/configs/atstk1003_defconfig
+++ b/arch/avr32/configs/atstk1003_defconfig
@@ -611,8 +611,8 @@ CONFIG_I2C_GPIO=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=m
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -637,7 +637,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
index 69e6c0d08ce8..518f7898df75 100644
--- a/arch/avr32/configs/atstk1004_defconfig
+++ b/arch/avr32/configs/atstk1004_defconfig
@@ -394,7 +394,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig
index 361c31c2af10..c1603c4860e0 100644
--- a/arch/avr32/configs/atstk1006_defconfig
+++ b/arch/avr32/configs/atstk1006_defconfig
@@ -684,8 +684,8 @@ CONFIG_I2C_GPIO=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -710,7 +710,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig
index e2bd9982e2af..4c3ac0643e4a 100644
--- a/arch/avr32/configs/favr-32_defconfig
+++ b/arch/avr32/configs/favr-32_defconfig
@@ -633,8 +633,8 @@ CONFIG_I2C_GPIO=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -659,7 +659,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig
index 0d3d2982c8f5..3970fcc4d76e 100644
--- a/arch/avr32/configs/hammerhead_defconfig
+++ b/arch/avr32/configs/hammerhead_defconfig
@@ -716,8 +716,8 @@ CONFIG_I2C_GPIO=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -742,7 +742,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/mimc200_defconfig b/arch/avr32/configs/mimc200_defconfig
index 981e4f8b8aeb..1a58ffbc752d 100644
--- a/arch/avr32/configs/mimc200_defconfig
+++ b/arch/avr32/configs/mimc200_defconfig
@@ -565,8 +565,8 @@ CONFIG_I2C_GPIO=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=y
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -592,7 +592,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-CONFIG_SPI_AT25=y
+CONFIG_EEPROM_AT25=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index e0b3f242b555..defb9785c65b 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -746,9 +746,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index 69f66c35b2a5..992424ff3153 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -793,9 +793,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -820,7 +820,7 @@ CONFIG_SPI_BFIN=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index f92668af00b0..21e3c1af55ba 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -837,9 +837,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -864,7 +864,7 @@ CONFIG_SPI_BFIN=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 92afd988449b..0bdf20a1af61 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -719,7 +719,7 @@ CONFIG_SPI_BFIN=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 49eabb41e9e5..2f747d6e97e2 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -743,9 +743,9 @@ CONFIG_I2C_HELPER_AUTO=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -770,7 +770,7 @@ CONFIG_SPI_BFIN=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 332142f7f9b4..8b0a81294e65 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -794,9 +794,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 CONFIG_SENSORS_AD5252=m
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -821,7 +821,7 @@ CONFIG_SPI_BFIN=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index ed15934c67c2..a1f766bf7d9b 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -796,9 +796,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -823,7 +823,7 @@ CONFIG_SPI_BFIN=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index d4ed9ce1f62f..cd2da6b7692c 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -928,9 +928,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -955,7 +955,7 @@ CONFIG_SPI_BFIN=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 1ecb7a38c905..b398ca202dbd 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -756,7 +756,7 @@ CONFIG_SPI_BFIN=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 9683b2e13097..3a20e281d23c 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -691,7 +691,7 @@ CONFIG_I2C_GPIO=m
 #
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -713,7 +713,7 @@ CONFIG_SPI_BFIN=y
 #
 # SPI Protocol Masters
 #
-CONFIG_SPI_AT25=y
+CONFIG_EEPROM_AT25=y
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index a041e7eba770..95146948166f 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -715,7 +715,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -742,7 +742,7 @@ CONFIG_SPI_BFIN=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index efd68bc78f35..efe9741b1f14 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -798,7 +798,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
 # CONFIG_SENSORS_PCA9543 is not set
@@ -826,7 +826,7 @@ CONFIG_SPI_BFIN=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index 5d3901d23fd1..bd553da15db8 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -750,7 +750,7 @@ CONFIG_SPI_BFIN=y
 #
 # SPI Protocol Masters
 #
-CONFIG_SPI_AT25=y
+CONFIG_EEPROM_AT25=y
 CONFIG_SPI_SPIDEV=y
 
 #
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index e66f5daaa828..eae83b5de92f 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -803,7 +803,7 @@ CONFIG_SPI_BFIN=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 
 #
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index ce5dde9de9db..ad096702ac16 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -755,9 +755,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -781,7 +781,7 @@ CONFIG_SPI_BFIN=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 7c8250d6fa66..fa580affc9d6 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -798,7 +798,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
 # CONFIG_SENSORS_PCA9543 is not set
@@ -826,7 +826,7 @@ CONFIG_SPI_BFIN=y
 #
 # SPI Protocol Masters
 #
-CONFIG_SPI_AT25=m
+CONFIG_EEPROM_AT25=m
 # CONFIG_SPI_SPIDEV is not set
 
 #
diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig
index 9af522c7dadf..97a1f1d20dcf 100644
--- a/arch/blackfin/configs/TCM-BF537_defconfig
+++ b/arch/blackfin/configs/TCM-BF537_defconfig
@@ -533,7 +533,7 @@ CONFIG_SPI_BFIN=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig
index 6dd8655664f3..ace41096b47b 100644
--- a/arch/ia64/configs/bigsur_defconfig
+++ b/arch/ia64/configs/bigsur_defconfig
@@ -752,7 +752,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 0a06b1333c95..514f0635dafe 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -841,7 +841,7 @@ CONFIG_I2C_ALGOPCF=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/m32r/configs/m32104ut_defconfig b/arch/m32r/configs/m32104ut_defconfig
index 9b5af6cd2e0b..6f54b00b3838 100644
--- a/arch/m32r/configs/m32104ut_defconfig
+++ b/arch/m32r/configs/m32104ut_defconfig
@@ -621,7 +621,7 @@ CONFIG_I2C_ELEKTOR=m
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/include/asm-m68k/Kbuild b/arch/m68k/include/asm/Kbuild
index 1a922fad76f7..1a922fad76f7 100644
--- a/include/asm-m68k/Kbuild
+++ b/arch/m68k/include/asm/Kbuild
diff --git a/arch/m68knommu/include/asm/MC68328.h b/arch/m68k/include/asm/MC68328.h
index a337e56d09bf..a337e56d09bf 100644
--- a/arch/m68knommu/include/asm/MC68328.h
+++ b/arch/m68k/include/asm/MC68328.h
diff --git a/arch/m68knommu/include/asm/MC68332.h b/arch/m68k/include/asm/MC68332.h
index 6bb8f02685a2..6bb8f02685a2 100644
--- a/arch/m68knommu/include/asm/MC68332.h
+++ b/arch/m68k/include/asm/MC68332.h
diff --git a/arch/m68knommu/include/asm/MC68EZ328.h b/arch/m68k/include/asm/MC68EZ328.h
index 69b7f9139e5e..69b7f9139e5e 100644
--- a/arch/m68knommu/include/asm/MC68EZ328.h
+++ b/arch/m68k/include/asm/MC68EZ328.h
diff --git a/arch/m68knommu/include/asm/MC68VZ328.h b/arch/m68k/include/asm/MC68VZ328.h
index 2b9bf626a0a5..2b9bf626a0a5 100644
--- a/arch/m68knommu/include/asm/MC68VZ328.h
+++ b/arch/m68k/include/asm/MC68VZ328.h
diff --git a/include/asm-m68k/a.out-core.h b/arch/m68k/include/asm/a.out-core.h
index f6bfc1d63ff6..f6bfc1d63ff6 100644
--- a/include/asm-m68k/a.out-core.h
+++ b/arch/m68k/include/asm/a.out-core.h
diff --git a/include/asm-m68k/a.out.h b/arch/m68k/include/asm/a.out.h
index 3885fe43432a..3885fe43432a 100644
--- a/include/asm-m68k/a.out.h
+++ b/arch/m68k/include/asm/a.out.h
diff --git a/include/asm-m68k/adb_iop.h b/arch/m68k/include/asm/adb_iop.h
index 8a48e56f2d62..8a48e56f2d62 100644
--- a/include/asm-m68k/adb_iop.h
+++ b/arch/m68k/include/asm/adb_iop.h
diff --git a/include/asm-m68k/amigahw.h b/arch/m68k/include/asm/amigahw.h
index 5ca5dd951a4a..5ca5dd951a4a 100644
--- a/include/asm-m68k/amigahw.h
+++ b/arch/m68k/include/asm/amigahw.h
diff --git a/include/asm-m68k/amigaints.h b/arch/m68k/include/asm/amigaints.h
index b1bcdb835ab9..b1bcdb835ab9 100644
--- a/include/asm-m68k/amigaints.h
+++ b/arch/m68k/include/asm/amigaints.h
diff --git a/include/asm-m68k/amigayle.h b/arch/m68k/include/asm/amigayle.h
index bb5a6aa329f3..bb5a6aa329f3 100644
--- a/include/asm-m68k/amigayle.h
+++ b/arch/m68k/include/asm/amigayle.h
diff --git a/include/asm-m68k/amipcmcia.h b/arch/m68k/include/asm/amipcmcia.h
index 6f1ec1887d82..6f1ec1887d82 100644
--- a/include/asm-m68k/amipcmcia.h
+++ b/arch/m68k/include/asm/amipcmcia.h
diff --git a/arch/m68knommu/include/asm/anchor.h b/arch/m68k/include/asm/anchor.h
index 871c0d5cfc3d..871c0d5cfc3d 100644
--- a/arch/m68knommu/include/asm/anchor.h
+++ b/arch/m68k/include/asm/anchor.h
diff --git a/include/asm-m68k/apollodma.h b/arch/m68k/include/asm/apollodma.h
index 954adc851adb..954adc851adb 100644
--- a/include/asm-m68k/apollodma.h
+++ b/arch/m68k/include/asm/apollodma.h
diff --git a/include/asm-m68k/apollohw.h b/arch/m68k/include/asm/apollohw.h
index a1373b9aa281..a1373b9aa281 100644
--- a/include/asm-m68k/apollohw.h
+++ b/arch/m68k/include/asm/apollohw.h
diff --git a/include/asm-m68k/atafd.h b/arch/m68k/include/asm/atafd.h
index 8456889ee7da..8456889ee7da 100644
--- a/include/asm-m68k/atafd.h
+++ b/arch/m68k/include/asm/atafd.h
diff --git a/include/asm-m68k/atafdreg.h b/arch/m68k/include/asm/atafdreg.h
index bbf80949fd9f..bbf80949fd9f 100644
--- a/include/asm-m68k/atafdreg.h
+++ b/arch/m68k/include/asm/atafdreg.h
diff --git a/include/asm-m68k/atari_joystick.h b/arch/m68k/include/asm/atari_joystick.h
index 93be7da9f2c7..93be7da9f2c7 100644
--- a/include/asm-m68k/atari_joystick.h
+++ b/arch/m68k/include/asm/atari_joystick.h
diff --git a/include/asm-m68k/atari_stdma.h b/arch/m68k/include/asm/atari_stdma.h
index 8e389b7fa70c..8e389b7fa70c 100644
--- a/include/asm-m68k/atari_stdma.h
+++ b/arch/m68k/include/asm/atari_stdma.h
diff --git a/include/asm-m68k/atari_stram.h b/arch/m68k/include/asm/atari_stram.h
index 7546d13963be..7546d13963be 100644
--- a/include/asm-m68k/atari_stram.h
+++ b/arch/m68k/include/asm/atari_stram.h
diff --git a/include/asm-m68k/atarihw.h b/arch/m68k/include/asm/atarihw.h
index 1412b4ab202f..1412b4ab202f 100644
--- a/include/asm-m68k/atarihw.h
+++ b/arch/m68k/include/asm/atarihw.h
diff --git a/include/asm-m68k/atariints.h b/arch/m68k/include/asm/atariints.h
index 5748e99f4e26..5748e99f4e26 100644
--- a/include/asm-m68k/atariints.h
+++ b/arch/m68k/include/asm/atariints.h
diff --git a/include/asm-m68k/atarikb.h b/arch/m68k/include/asm/atarikb.h
index 546e7da5804f..546e7da5804f 100644
--- a/include/asm-m68k/atarikb.h
+++ b/arch/m68k/include/asm/atarikb.h
diff --git a/arch/m68k/include/asm/atomic.h b/arch/m68k/include/asm/atomic.h
new file mode 100644
index 000000000000..8d29145ebb27
--- /dev/null
+++ b/arch/m68k/include/asm/atomic.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "atomic_no.h"
+#else
+#include "atomic_mm.h"
+#endif
diff --git a/include/asm-m68k/atomic.h b/arch/m68k/include/asm/atomic_mm.h
index eb0ab9d4ee77..eb0ab9d4ee77 100644
--- a/include/asm-m68k/atomic.h
+++ b/arch/m68k/include/asm/atomic_mm.h
diff --git a/arch/m68knommu/include/asm/atomic.h b/arch/m68k/include/asm/atomic_no.h
index 6bb674855a3f..6bb674855a3f 100644
--- a/arch/m68knommu/include/asm/atomic.h
+++ b/arch/m68k/include/asm/atomic_no.h
diff --git a/arch/m68knommu/include/asm/auxvec.h b/arch/m68k/include/asm/auxvec.h
index 844d6d52204b..844d6d52204b 100644
--- a/arch/m68knommu/include/asm/auxvec.h
+++ b/arch/m68k/include/asm/auxvec.h
diff --git a/arch/m68k/include/asm/bitops.h b/arch/m68k/include/asm/bitops.h
new file mode 100644
index 000000000000..ce163abddaba
--- /dev/null
+++ b/arch/m68k/include/asm/bitops.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "bitops_no.h"
+#else
+#include "bitops_mm.h"
+#endif
diff --git a/include/asm-m68k/bitops.h b/arch/m68k/include/asm/bitops_mm.h
index 9bde784e7bad..9bde784e7bad 100644
--- a/include/asm-m68k/bitops.h
+++ b/arch/m68k/include/asm/bitops_mm.h
diff --git a/arch/m68knommu/include/asm/bitops.h b/arch/m68k/include/asm/bitops_no.h
index 9d3cbe5fad1e..9d3cbe5fad1e 100644
--- a/arch/m68knommu/include/asm/bitops.h
+++ b/arch/m68k/include/asm/bitops_no.h
diff --git a/include/asm-m68k/blinken.h b/arch/m68k/include/asm/blinken.h
index 1a749cf7b06d..1a749cf7b06d 100644
--- a/include/asm-m68k/blinken.h
+++ b/arch/m68k/include/asm/blinken.h
diff --git a/arch/m68k/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo.h
new file mode 100644
index 000000000000..fedf3e326121
--- /dev/null
+++ b/arch/m68k/include/asm/bootinfo.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "bootinfo_no.h"
+#else
+#include "bootinfo_mm.h"
+#endif
diff --git a/include/asm-m68k/bootinfo.h b/arch/m68k/include/asm/bootinfo_mm.h
index fb8a06b9ab6a..fb8a06b9ab6a 100644
--- a/include/asm-m68k/bootinfo.h
+++ b/arch/m68k/include/asm/bootinfo_mm.h
diff --git a/arch/m68knommu/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo_no.h
index c12e526f5189..c12e526f5189 100644
--- a/arch/m68knommu/include/asm/bootinfo.h
+++ b/arch/m68k/include/asm/bootinfo_no.h
diff --git a/arch/m68knommu/include/asm/bootstd.h b/arch/m68k/include/asm/bootstd.h
index bdc1a4ac4fe9..bdc1a4ac4fe9 100644
--- a/arch/m68knommu/include/asm/bootstd.h
+++ b/arch/m68k/include/asm/bootstd.h
diff --git a/arch/m68k/include/asm/bug.h b/arch/m68k/include/asm/bug.h
new file mode 100644
index 000000000000..997e0944ebc1
--- /dev/null
+++ b/arch/m68k/include/asm/bug.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "bug_no.h"
+#else
+#include "bug_mm.h"
+#endif
diff --git a/include/asm-m68k/bug.h b/arch/m68k/include/asm/bug_mm.h
index e5b528deb8a8..e5b528deb8a8 100644
--- a/include/asm-m68k/bug.h
+++ b/arch/m68k/include/asm/bug_mm.h
diff --git a/arch/m68knommu/include/asm/bug.h b/arch/m68k/include/asm/bug_no.h
index 70e7dc0af21a..70e7dc0af21a 100644
--- a/arch/m68knommu/include/asm/bug.h
+++ b/arch/m68k/include/asm/bug_no.h
diff --git a/arch/m68k/include/asm/bugs.h b/arch/m68k/include/asm/bugs.h
new file mode 100644
index 000000000000..01f047d784ec
--- /dev/null
+++ b/arch/m68k/include/asm/bugs.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "bugs_no.h"
+#else
+#include "bugs_mm.h"
+#endif
diff --git a/include/asm-m68k/bugs.h b/arch/m68k/include/asm/bugs_mm.h
index d01935592410..d01935592410 100644
--- a/include/asm-m68k/bugs.h
+++ b/arch/m68k/include/asm/bugs_mm.h
diff --git a/arch/m68knommu/include/asm/bugs.h b/arch/m68k/include/asm/bugs_no.h
index 5f382dac3a60..5f382dac3a60 100644
--- a/arch/m68knommu/include/asm/bugs.h
+++ b/arch/m68k/include/asm/bugs_no.h
diff --git a/include/asm-m68k/bvme6000hw.h b/arch/m68k/include/asm/bvme6000hw.h
index f40d2f8510ee..f40d2f8510ee 100644
--- a/include/asm-m68k/bvme6000hw.h
+++ b/arch/m68k/include/asm/bvme6000hw.h
diff --git a/include/asm-m68k/byteorder.h b/arch/m68k/include/asm/byteorder.h
index 31b260a88803..31b260a88803 100644
--- a/include/asm-m68k/byteorder.h
+++ b/arch/m68k/include/asm/byteorder.h
diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h
new file mode 100644
index 000000000000..599c29bc8f40
--- /dev/null
+++ b/arch/m68k/include/asm/cache.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "cache_no.h"
+#else
+#include "cache_mm.h"
+#endif
diff --git a/include/asm-m68k/cache.h b/arch/m68k/include/asm/cache_mm.h
index fed3fd30de7e..fed3fd30de7e 100644
--- a/include/asm-m68k/cache.h
+++ b/arch/m68k/include/asm/cache_mm.h
diff --git a/arch/m68knommu/include/asm/cache.h b/arch/m68k/include/asm/cache_no.h
index 24e9eace5f8c..24e9eace5f8c 100644
--- a/arch/m68knommu/include/asm/cache.h
+++ b/arch/m68k/include/asm/cache_no.h
diff --git a/include/asm-m68k/cachectl.h b/arch/m68k/include/asm/cachectl.h
index 525978e959e3..525978e959e3 100644
--- a/include/asm-m68k/cachectl.h
+++ b/arch/m68k/include/asm/cachectl.h
diff --git a/arch/m68k/include/asm/cacheflush.h b/arch/m68k/include/asm/cacheflush.h
new file mode 100644
index 000000000000..a70d7319630a
--- /dev/null
+++ b/arch/m68k/include/asm/cacheflush.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "cacheflush_no.h"
+#else
+#include "cacheflush_mm.h"
+#endif
diff --git a/include/asm-m68k/cacheflush.h b/arch/m68k/include/asm/cacheflush_mm.h
index 16bf375fdbe1..16bf375fdbe1 100644
--- a/include/asm-m68k/cacheflush.h
+++ b/arch/m68k/include/asm/cacheflush_mm.h
diff --git a/arch/m68knommu/include/asm/cacheflush.h b/arch/m68k/include/asm/cacheflush_no.h
index 87e5dc0413b4..87e5dc0413b4 100644
--- a/arch/m68knommu/include/asm/cacheflush.h
+++ b/arch/m68k/include/asm/cacheflush_no.h
diff --git a/arch/m68k/include/asm/checksum.h b/arch/m68k/include/asm/checksum.h
new file mode 100644
index 000000000000..1cf544767453
--- /dev/null
+++ b/arch/m68k/include/asm/checksum.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "checksum_no.h"
+#else
+#include "checksum_mm.h"
+#endif
diff --git a/include/asm-m68k/checksum.h b/arch/m68k/include/asm/checksum_mm.h
index 494f9aec37ea..494f9aec37ea 100644
--- a/include/asm-m68k/checksum.h
+++ b/arch/m68k/include/asm/checksum_mm.h
diff --git a/arch/m68knommu/include/asm/checksum.h b/arch/m68k/include/asm/checksum_no.h
index 81883482ffb1..81883482ffb1 100644
--- a/arch/m68knommu/include/asm/checksum.h
+++ b/arch/m68k/include/asm/checksum_no.h
diff --git a/arch/m68knommu/include/asm/coldfire.h b/arch/m68k/include/asm/coldfire.h
index 83a9fa4e618a..83a9fa4e618a 100644
--- a/arch/m68knommu/include/asm/coldfire.h
+++ b/arch/m68k/include/asm/coldfire.h
diff --git a/arch/m68knommu/include/asm/commproc.h b/arch/m68k/include/asm/commproc.h
index edf5eb6c08d2..edf5eb6c08d2 100644
--- a/arch/m68knommu/include/asm/commproc.h
+++ b/arch/m68k/include/asm/commproc.h
diff --git a/include/asm-m68k/contregs.h b/arch/m68k/include/asm/contregs.h
index d1ea750bddfe..d1ea750bddfe 100644
--- a/include/asm-m68k/contregs.h
+++ b/arch/m68k/include/asm/contregs.h
diff --git a/include/asm-m68k/cputime.h b/arch/m68k/include/asm/cputime.h
index c79c5e892305..c79c5e892305 100644
--- a/include/asm-m68k/cputime.h
+++ b/arch/m68k/include/asm/cputime.h
diff --git a/arch/m68k/include/asm/current.h b/arch/m68k/include/asm/current.h
new file mode 100644
index 000000000000..51b056dfaedd
--- /dev/null
+++ b/arch/m68k/include/asm/current.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "current_no.h"
+#else
+#include "current_mm.h"
+#endif
diff --git a/include/asm-m68k/current.h b/arch/m68k/include/asm/current_mm.h
index 8de8f8ceda61..8de8f8ceda61 100644
--- a/include/asm-m68k/current.h
+++ b/arch/m68k/include/asm/current_mm.h
diff --git a/arch/m68knommu/include/asm/current.h b/arch/m68k/include/asm/current_no.h
index 53ee0f9f7cef..53ee0f9f7cef 100644
--- a/arch/m68knommu/include/asm/current.h
+++ b/arch/m68k/include/asm/current_no.h
diff --git a/arch/m68knommu/include/asm/dbg.h b/arch/m68k/include/asm/dbg.h
index 27af3270f671..27af3270f671 100644
--- a/arch/m68knommu/include/asm/dbg.h
+++ b/arch/m68k/include/asm/dbg.h
diff --git a/arch/m68k/include/asm/delay.h b/arch/m68k/include/asm/delay.h
new file mode 100644
index 000000000000..d2598e3dd7b2
--- /dev/null
+++ b/arch/m68k/include/asm/delay.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "delay_no.h"
+#else
+#include "delay_mm.h"
+#endif
diff --git a/include/asm-m68k/delay.h b/arch/m68k/include/asm/delay_mm.h
index 5ed92851bc6f..5ed92851bc6f 100644
--- a/include/asm-m68k/delay.h
+++ b/arch/m68k/include/asm/delay_mm.h
diff --git a/arch/m68knommu/include/asm/delay.h b/arch/m68k/include/asm/delay_no.h
index 55cbd6294ab6..55cbd6294ab6 100644
--- a/arch/m68knommu/include/asm/delay.h
+++ b/arch/m68k/include/asm/delay_no.h
diff --git a/arch/m68knommu/include/asm/device.h b/arch/m68k/include/asm/device.h
index d8f9872b0e2d..d8f9872b0e2d 100644
--- a/arch/m68knommu/include/asm/device.h
+++ b/arch/m68k/include/asm/device.h
diff --git a/arch/m68k/include/asm/div64.h b/arch/m68k/include/asm/div64.h
new file mode 100644
index 000000000000..d211d9f54276
--- /dev/null
+++ b/arch/m68k/include/asm/div64.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "div64_no.h"
+#else
+#include "div64_mm.h"
+#endif
diff --git a/include/asm-m68k/div64.h b/arch/m68k/include/asm/div64_mm.h
index 8243c931b5c0..8243c931b5c0 100644
--- a/include/asm-m68k/div64.h
+++ b/arch/m68k/include/asm/div64_mm.h
diff --git a/arch/m68knommu/include/asm/div64.h b/arch/m68k/include/asm/div64_no.h
index 6cd978cefb28..6cd978cefb28 100644
--- a/arch/m68knommu/include/asm/div64.h
+++ b/arch/m68k/include/asm/div64_no.h
diff --git a/arch/m68k/include/asm/dma-mapping.h b/arch/m68k/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..f4a4c7638f89
--- /dev/null
+++ b/arch/m68k/include/asm/dma-mapping.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "dma-mapping_no.h"
+#else
+#include "dma-mapping_mm.h"
+#endif
diff --git a/include/asm-m68k/dma-mapping.h b/arch/m68k/include/asm/dma-mapping_mm.h
index 26f505488c11..26f505488c11 100644
--- a/include/asm-m68k/dma-mapping.h
+++ b/arch/m68k/include/asm/dma-mapping_mm.h
diff --git a/arch/m68knommu/include/asm/dma-mapping.h b/arch/m68k/include/asm/dma-mapping_no.h
index 6aeab18e58bd..6aeab18e58bd 100644
--- a/arch/m68knommu/include/asm/dma-mapping.h
+++ b/arch/m68k/include/asm/dma-mapping_no.h
diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h
new file mode 100644
index 000000000000..b82e660cf1c2
--- /dev/null
+++ b/arch/m68k/include/asm/dma.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "dma_no.h"
+#else
+#include "dma_mm.h"
+#endif
diff --git a/include/asm-m68k/dma.h b/arch/m68k/include/asm/dma_mm.h
index 4240fbc946f8..4240fbc946f8 100644
--- a/include/asm-m68k/dma.h
+++ b/arch/m68k/include/asm/dma_mm.h
diff --git a/arch/m68knommu/include/asm/dma.h b/arch/m68k/include/asm/dma_no.h
index 939a02056217..939a02056217 100644
--- a/arch/m68knommu/include/asm/dma.h
+++ b/arch/m68k/include/asm/dma_no.h
diff --git a/include/asm-m68k/dsp56k.h b/arch/m68k/include/asm/dsp56k.h
index 2d8c0c9f794b..2d8c0c9f794b 100644
--- a/include/asm-m68k/dsp56k.h
+++ b/arch/m68k/include/asm/dsp56k.h
diff --git a/include/asm-m68k/dvma.h b/arch/m68k/include/asm/dvma.h
index 890bbf7e7758..890bbf7e7758 100644
--- a/include/asm-m68k/dvma.h
+++ b/arch/m68k/include/asm/dvma.h
diff --git a/arch/m68k/include/asm/elf.h b/arch/m68k/include/asm/elf.h
new file mode 100644
index 000000000000..04ce488bc63f
--- /dev/null
+++ b/arch/m68k/include/asm/elf.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "elf_no.h"
+#else
+#include "elf_mm.h"
+#endif
diff --git a/include/asm-m68k/elf.h b/arch/m68k/include/asm/elf_mm.h
index 0b0f49eb876b..0b0f49eb876b 100644
--- a/include/asm-m68k/elf.h
+++ b/arch/m68k/include/asm/elf_mm.h
diff --git a/arch/m68knommu/include/asm/elf.h b/arch/m68k/include/asm/elf_no.h
index b8046837f384..b8046837f384 100644
--- a/arch/m68knommu/include/asm/elf.h
+++ b/arch/m68k/include/asm/elf_no.h
diff --git a/arch/m68knommu/include/asm/elia.h b/arch/m68k/include/asm/elia.h
index e037d4e2de33..e037d4e2de33 100644
--- a/arch/m68knommu/include/asm/elia.h
+++ b/arch/m68k/include/asm/elia.h
diff --git a/arch/m68knommu/include/asm/emergency-restart.h b/arch/m68k/include/asm/emergency-restart.h
index 108d8c48e42e..108d8c48e42e 100644
--- a/arch/m68knommu/include/asm/emergency-restart.h
+++ b/arch/m68k/include/asm/emergency-restart.h
diff --git a/arch/m68k/include/asm/entry.h b/arch/m68k/include/asm/entry.h
new file mode 100644
index 000000000000..876eec6f2b52
--- /dev/null
+++ b/arch/m68k/include/asm/entry.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "entry_no.h"
+#else
+#include "entry_mm.h"
+#endif
diff --git a/include/asm-m68k/entry.h b/arch/m68k/include/asm/entry_mm.h
index 5202f5a5b420..5202f5a5b420 100644
--- a/include/asm-m68k/entry.h
+++ b/arch/m68k/include/asm/entry_mm.h
diff --git a/arch/m68knommu/include/asm/entry.h b/arch/m68k/include/asm/entry_no.h
index c2553d26273d..c2553d26273d 100644
--- a/arch/m68knommu/include/asm/entry.h
+++ b/arch/m68k/include/asm/entry_no.h
diff --git a/include/asm-m68k/errno.h b/arch/m68k/include/asm/errno.h
index 0d4e188d6ef6..0d4e188d6ef6 100644
--- a/include/asm-m68k/errno.h
+++ b/arch/m68k/include/asm/errno.h
diff --git a/arch/m68k/include/asm/fb.h b/arch/m68k/include/asm/fb.h
new file mode 100644
index 000000000000..97bcaefd2064
--- /dev/null
+++ b/arch/m68k/include/asm/fb.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "fb_no.h"
+#else
+#include "fb_mm.h"
+#endif
diff --git a/include/asm-m68k/fb.h b/arch/m68k/include/asm/fb_mm.h
index 380b97ae8157..380b97ae8157 100644
--- a/include/asm-m68k/fb.h
+++ b/arch/m68k/include/asm/fb_mm.h
diff --git a/arch/m68knommu/include/asm/fb.h b/arch/m68k/include/asm/fb_no.h
index c7df38030992..c7df38030992 100644
--- a/arch/m68knommu/include/asm/fb.h
+++ b/arch/m68k/include/asm/fb_no.h
diff --git a/include/asm-m68k/fbio.h b/arch/m68k/include/asm/fbio.h
index b9215a0907d3..b9215a0907d3 100644
--- a/include/asm-m68k/fbio.h
+++ b/arch/m68k/include/asm/fbio.h
diff --git a/include/asm-m68k/fcntl.h b/arch/m68k/include/asm/fcntl.h
index 1c369b20dc45..1c369b20dc45 100644
--- a/include/asm-m68k/fcntl.h
+++ b/arch/m68k/include/asm/fcntl.h
diff --git a/arch/m68knommu/include/asm/flat.h b/arch/m68k/include/asm/flat.h
index 814b5174a8e0..814b5174a8e0 100644
--- a/arch/m68knommu/include/asm/flat.h
+++ b/arch/m68k/include/asm/flat.h
diff --git a/include/asm-m68k/floppy.h b/arch/m68k/include/asm/floppy.h
index 697d50393dd0..697d50393dd0 100644
--- a/include/asm-m68k/floppy.h
+++ b/arch/m68k/include/asm/floppy.h
diff --git a/arch/m68k/include/asm/fpu.h b/arch/m68k/include/asm/fpu.h
new file mode 100644
index 000000000000..e19bc5ed9c37
--- /dev/null
+++ b/arch/m68k/include/asm/fpu.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "fpu_no.h"
+#else
+#include "fpu_mm.h"
+#endif
diff --git a/include/asm-m68k/fpu.h b/arch/m68k/include/asm/fpu_mm.h
index ffb6b8cfc6d5..ffb6b8cfc6d5 100644
--- a/include/asm-m68k/fpu.h
+++ b/arch/m68k/include/asm/fpu_mm.h
diff --git a/arch/m68knommu/include/asm/fpu.h b/arch/m68k/include/asm/fpu_no.h
index b16b2e4fca2a..b16b2e4fca2a 100644
--- a/arch/m68knommu/include/asm/fpu.h
+++ b/arch/m68k/include/asm/fpu_no.h
diff --git a/arch/m68knommu/include/asm/futex.h b/arch/m68k/include/asm/futex.h
index 6a332a9f099c..6a332a9f099c 100644
--- a/arch/m68knommu/include/asm/futex.h
+++ b/arch/m68k/include/asm/futex.h
diff --git a/arch/m68k/include/asm/hardirq.h b/arch/m68k/include/asm/hardirq.h
new file mode 100644
index 000000000000..56d0d5db231c
--- /dev/null
+++ b/arch/m68k/include/asm/hardirq.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "hardirq_no.h"
+#else
+#include "hardirq_mm.h"
+#endif
diff --git a/include/asm-m68k/hardirq.h b/arch/m68k/include/asm/hardirq_mm.h
index 394ee946015c..394ee946015c 100644
--- a/include/asm-m68k/hardirq.h
+++ b/arch/m68k/include/asm/hardirq_mm.h
diff --git a/arch/m68knommu/include/asm/hardirq.h b/arch/m68k/include/asm/hardirq_no.h
index bfad28149a49..bfad28149a49 100644
--- a/arch/m68knommu/include/asm/hardirq.h
+++ b/arch/m68k/include/asm/hardirq_no.h
diff --git a/include/asm-m68k/hp300hw.h b/arch/m68k/include/asm/hp300hw.h
index d998ea67c19c..d998ea67c19c 100644
--- a/include/asm-m68k/hp300hw.h
+++ b/arch/m68k/include/asm/hp300hw.h
diff --git a/arch/m68k/include/asm/hw_irq.h b/arch/m68k/include/asm/hw_irq.h
new file mode 100644
index 000000000000..e19526015890
--- /dev/null
+++ b/arch/m68k/include/asm/hw_irq.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "hw_irq_no.h"
+#else
+#include "hw_irq_mm.h"
+#endif
diff --git a/include/asm-m68k/hw_irq.h b/arch/m68k/include/asm/hw_irq_mm.h
index eacef0951fbf..eacef0951fbf 100644
--- a/include/asm-m68k/hw_irq.h
+++ b/arch/m68k/include/asm/hw_irq_mm.h
diff --git a/arch/m68knommu/include/asm/hw_irq.h b/arch/m68k/include/asm/hw_irq_no.h
index f3ec9e5ae049..f3ec9e5ae049 100644
--- a/arch/m68knommu/include/asm/hw_irq.h
+++ b/arch/m68k/include/asm/hw_irq_no.h
diff --git a/include/asm-m68k/hwtest.h b/arch/m68k/include/asm/hwtest.h
index 402c8a4401fe..402c8a4401fe 100644
--- a/include/asm-m68k/hwtest.h
+++ b/arch/m68k/include/asm/hwtest.h
diff --git a/include/asm-m68k/ide.h b/arch/m68k/include/asm/ide.h
index b996a3c8cff5..b996a3c8cff5 100644
--- a/include/asm-m68k/ide.h
+++ b/arch/m68k/include/asm/ide.h
diff --git a/include/asm-m68k/idprom.h b/arch/m68k/include/asm/idprom.h
index 160616a89e05..160616a89e05 100644
--- a/include/asm-m68k/idprom.h
+++ b/arch/m68k/include/asm/idprom.h
diff --git a/include/asm-m68k/intersil.h b/arch/m68k/include/asm/intersil.h
index f482902cac8a..f482902cac8a 100644
--- a/include/asm-m68k/intersil.h
+++ b/arch/m68k/include/asm/intersil.h
diff --git a/arch/m68k/include/asm/io.h b/arch/m68k/include/asm/io.h
new file mode 100644
index 000000000000..c7210ba184ea
--- /dev/null
+++ b/arch/m68k/include/asm/io.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "io_no.h"
+#else
+#include "io_mm.h"
+#endif
diff --git a/include/asm-m68k/io.h b/arch/m68k/include/asm/io_mm.h
index 9e673e3bd434..9e673e3bd434 100644
--- a/include/asm-m68k/io.h
+++ b/arch/m68k/include/asm/io_mm.h
diff --git a/arch/m68knommu/include/asm/io.h b/arch/m68k/include/asm/io_no.h
index 6adef1ee2082..6adef1ee2082 100644
--- a/arch/m68knommu/include/asm/io.h
+++ b/arch/m68k/include/asm/io_no.h
diff --git a/arch/m68knommu/include/asm/ioctl.h b/arch/m68k/include/asm/ioctl.h
index b279fe06dfe5..b279fe06dfe5 100644
--- a/arch/m68knommu/include/asm/ioctl.h
+++ b/arch/m68k/include/asm/ioctl.h
diff --git a/include/asm-m68k/ioctls.h b/arch/m68k/include/asm/ioctls.h
index b8d2f4be7fd7..b8d2f4be7fd7 100644
--- a/include/asm-m68k/ioctls.h
+++ b/arch/m68k/include/asm/ioctls.h
diff --git a/include/asm-m68k/ipcbuf.h b/arch/m68k/include/asm/ipcbuf.h
index a623ea3f0955..a623ea3f0955 100644
--- a/include/asm-m68k/ipcbuf.h
+++ b/arch/m68k/include/asm/ipcbuf.h
diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h
new file mode 100644
index 000000000000..d031416595b2
--- /dev/null
+++ b/arch/m68k/include/asm/irq.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "irq_no.h"
+#else
+#include "irq_mm.h"
+#endif
diff --git a/include/asm-m68k/irq.h b/arch/m68k/include/asm/irq_mm.h
index 226bfc0f21b1..226bfc0f21b1 100644
--- a/include/asm-m68k/irq.h
+++ b/arch/m68k/include/asm/irq_mm.h
diff --git a/arch/m68knommu/include/asm/irq.h b/arch/m68k/include/asm/irq_no.h
index 9373c31ac87d..9373c31ac87d 100644
--- a/arch/m68knommu/include/asm/irq.h
+++ b/arch/m68k/include/asm/irq_no.h
diff --git a/arch/m68knommu/include/asm/irq_regs.h b/arch/m68k/include/asm/irq_regs.h
index 3dd9c0b70270..3dd9c0b70270 100644
--- a/arch/m68knommu/include/asm/irq_regs.h
+++ b/arch/m68k/include/asm/irq_regs.h
diff --git a/arch/m68knommu/include/asm/kdebug.h b/arch/m68k/include/asm/kdebug.h
index 6ece1b037665..6ece1b037665 100644
--- a/arch/m68knommu/include/asm/kdebug.h
+++ b/arch/m68k/include/asm/kdebug.h
diff --git a/arch/m68k/include/asm/kmap_types.h b/arch/m68k/include/asm/kmap_types.h
new file mode 100644
index 000000000000..045d9fd122a2
--- /dev/null
+++ b/arch/m68k/include/asm/kmap_types.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "kmap_types_no.h"
+#else
+#include "kmap_types_mm.h"
+#endif
diff --git a/include/asm-m68k/kmap_types.h b/arch/m68k/include/asm/kmap_types_mm.h
index c843c63d3801..c843c63d3801 100644
--- a/include/asm-m68k/kmap_types.h
+++ b/arch/m68k/include/asm/kmap_types_mm.h
diff --git a/arch/m68knommu/include/asm/kmap_types.h b/arch/m68k/include/asm/kmap_types_no.h
index bfb6707575d1..bfb6707575d1 100644
--- a/arch/m68knommu/include/asm/kmap_types.h
+++ b/arch/m68k/include/asm/kmap_types_no.h
diff --git a/include/asm-m68k/linkage.h b/arch/m68k/include/asm/linkage.h
index 5a822bb790f7..5a822bb790f7 100644
--- a/include/asm-m68k/linkage.h
+++ b/arch/m68k/include/asm/linkage.h
diff --git a/include/asm-m68k/local.h b/arch/m68k/include/asm/local.h
index 6c259263e1f0..6c259263e1f0 100644
--- a/include/asm-m68k/local.h
+++ b/arch/m68k/include/asm/local.h
diff --git a/arch/m68knommu/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h
index 7e3594dea88b..7e3594dea88b 100644
--- a/arch/m68knommu/include/asm/m5206sim.h
+++ b/arch/m68k/include/asm/m5206sim.h
diff --git a/arch/m68knommu/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index 49d016e6391a..49d016e6391a 100644
--- a/arch/m68knommu/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
diff --git a/arch/m68knommu/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index bf397313e93f..bf397313e93f 100644
--- a/arch/m68knommu/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
diff --git a/arch/m68knommu/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index 366eb8602d2f..366eb8602d2f 100644
--- a/arch/m68knommu/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
diff --git a/arch/m68knommu/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h
index 6217edc21139..6217edc21139 100644
--- a/arch/m68knommu/include/asm/m5272sim.h
+++ b/arch/m68k/include/asm/m5272sim.h
diff --git a/arch/m68knommu/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
index 1f63ab3fb3e6..1f63ab3fb3e6 100644
--- a/arch/m68knommu/include/asm/m527xsim.h
+++ b/arch/m68k/include/asm/m527xsim.h
diff --git a/arch/m68knommu/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index 28bf783a5d6d..28bf783a5d6d 100644
--- a/arch/m68knommu/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
diff --git a/arch/m68knommu/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h
index 5886728409c0..5886728409c0 100644
--- a/arch/m68knommu/include/asm/m5307sim.h
+++ b/arch/m68k/include/asm/m5307sim.h
diff --git a/arch/m68knommu/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index 1835fd20a82c..1835fd20a82c 100644
--- a/arch/m68knommu/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
diff --git a/arch/m68knommu/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h
index cc22c4a53005..cc22c4a53005 100644
--- a/arch/m68knommu/include/asm/m5407sim.h
+++ b/arch/m68k/include/asm/m5407sim.h
diff --git a/arch/m68knommu/include/asm/m68360.h b/arch/m68k/include/asm/m68360.h
index eb7d39ef2855..eb7d39ef2855 100644
--- a/arch/m68knommu/include/asm/m68360.h
+++ b/arch/m68k/include/asm/m68360.h
diff --git a/arch/m68knommu/include/asm/m68360_enet.h b/arch/m68k/include/asm/m68360_enet.h
index c36f4d059203..c36f4d059203 100644
--- a/arch/m68knommu/include/asm/m68360_enet.h
+++ b/arch/m68k/include/asm/m68360_enet.h
diff --git a/arch/m68knommu/include/asm/m68360_pram.h b/arch/m68k/include/asm/m68360_pram.h
index e6088bbce93d..e6088bbce93d 100644
--- a/arch/m68knommu/include/asm/m68360_pram.h
+++ b/arch/m68k/include/asm/m68360_pram.h
diff --git a/arch/m68knommu/include/asm/m68360_quicc.h b/arch/m68k/include/asm/m68360_quicc.h
index 6d40f4d18e10..6d40f4d18e10 100644
--- a/arch/m68knommu/include/asm/m68360_quicc.h
+++ b/arch/m68k/include/asm/m68360_quicc.h
diff --git a/arch/m68knommu/include/asm/m68360_regs.h b/arch/m68k/include/asm/m68360_regs.h
index d57217ca4f27..d57217ca4f27 100644
--- a/arch/m68knommu/include/asm/m68360_regs.h
+++ b/arch/m68k/include/asm/m68360_regs.h
diff --git a/include/asm-m68k/mac_asc.h b/arch/m68k/include/asm/mac_asc.h
index fc2e5467b41e..fc2e5467b41e 100644
--- a/include/asm-m68k/mac_asc.h
+++ b/arch/m68k/include/asm/mac_asc.h
diff --git a/include/asm-m68k/mac_baboon.h b/arch/m68k/include/asm/mac_baboon.h
index c2a042b8c349..c2a042b8c349 100644
--- a/include/asm-m68k/mac_baboon.h
+++ b/arch/m68k/include/asm/mac_baboon.h
diff --git a/include/asm-m68k/mac_iop.h b/arch/m68k/include/asm/mac_iop.h
index a2c7e6fcca38..a2c7e6fcca38 100644
--- a/include/asm-m68k/mac_iop.h
+++ b/arch/m68k/include/asm/mac_iop.h
diff --git a/include/asm-m68k/mac_mouse.h b/arch/m68k/include/asm/mac_mouse.h
index 39a5c292eaee..39a5c292eaee 100644
--- a/include/asm-m68k/mac_mouse.h
+++ b/arch/m68k/include/asm/mac_mouse.h
diff --git a/include/asm-m68k/mac_oss.h b/arch/m68k/include/asm/mac_oss.h
index 7221f7251934..7221f7251934 100644
--- a/include/asm-m68k/mac_oss.h
+++ b/arch/m68k/include/asm/mac_oss.h
diff --git a/include/asm-m68k/mac_psc.h b/arch/m68k/include/asm/mac_psc.h
index 7808bb0b2323..7808bb0b2323 100644
--- a/include/asm-m68k/mac_psc.h
+++ b/arch/m68k/include/asm/mac_psc.h
diff --git a/include/asm-m68k/mac_via.h b/arch/m68k/include/asm/mac_via.h
index 39afb438b656..39afb438b656 100644
--- a/include/asm-m68k/mac_via.h
+++ b/arch/m68k/include/asm/mac_via.h
diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h
new file mode 100644
index 000000000000..fc24b6fc5508
--- /dev/null
+++ b/arch/m68k/include/asm/machdep.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "machdep_no.h"
+#else
+#include "machdep_mm.h"
+#endif
diff --git a/include/asm-m68k/machdep.h b/arch/m68k/include/asm/machdep_mm.h
index 5637dcef314e..5637dcef314e 100644
--- a/include/asm-m68k/machdep.h
+++ b/arch/m68k/include/asm/machdep_mm.h
diff --git a/arch/m68knommu/include/asm/machdep.h b/arch/m68k/include/asm/machdep_no.h
index de9f47a51cc2..de9f47a51cc2 100644
--- a/arch/m68knommu/include/asm/machdep.h
+++ b/arch/m68k/include/asm/machdep_no.h
diff --git a/include/asm-m68k/machines.h b/arch/m68k/include/asm/machines.h
index be667e84f01b..be667e84f01b 100644
--- a/include/asm-m68k/machines.h
+++ b/arch/m68k/include/asm/machines.h
diff --git a/include/asm-m68k/machw.h b/arch/m68k/include/asm/machw.h
index 2b4de0c2ce4a..2b4de0c2ce4a 100644
--- a/include/asm-m68k/machw.h
+++ b/arch/m68k/include/asm/machw.h
diff --git a/include/asm-m68k/macintosh.h b/arch/m68k/include/asm/macintosh.h
index 05309f7e3d06..05309f7e3d06 100644
--- a/include/asm-m68k/macintosh.h
+++ b/arch/m68k/include/asm/macintosh.h
diff --git a/include/asm-m68k/macints.h b/arch/m68k/include/asm/macints.h
index 679c48ab4407..679c48ab4407 100644
--- a/include/asm-m68k/macints.h
+++ b/arch/m68k/include/asm/macints.h
diff --git a/include/asm-m68k/math-emu.h b/arch/m68k/include/asm/math-emu.h
index ddfab96403cb..ddfab96403cb 100644
--- a/include/asm-m68k/math-emu.h
+++ b/arch/m68k/include/asm/math-emu.h
diff --git a/arch/m68k/include/asm/mc146818rtc.h b/arch/m68k/include/asm/mc146818rtc.h
new file mode 100644
index 000000000000..fb90dcf78426
--- /dev/null
+++ b/arch/m68k/include/asm/mc146818rtc.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "mc146818rtc_no.h"
+#else
+#include "mc146818rtc_mm.h"
+#endif
diff --git a/include/asm-m68k/mc146818rtc.h b/arch/m68k/include/asm/mc146818rtc_mm.h
index 9f70a01f73dc..9f70a01f73dc 100644
--- a/include/asm-m68k/mc146818rtc.h
+++ b/arch/m68k/include/asm/mc146818rtc_mm.h
diff --git a/arch/m68knommu/include/asm/mc146818rtc.h b/arch/m68k/include/asm/mc146818rtc_no.h
index 907a0481a140..907a0481a140 100644
--- a/arch/m68knommu/include/asm/mc146818rtc.h
+++ b/arch/m68k/include/asm/mc146818rtc_no.h
diff --git a/arch/m68knommu/include/asm/mcfcache.h b/arch/m68k/include/asm/mcfcache.h
index c042634fadaa..c042634fadaa 100644
--- a/arch/m68knommu/include/asm/mcfcache.h
+++ b/arch/m68k/include/asm/mcfcache.h
diff --git a/arch/m68knommu/include/asm/mcfdma.h b/arch/m68k/include/asm/mcfdma.h
index 705c52c79cd8..705c52c79cd8 100644
--- a/arch/m68knommu/include/asm/mcfdma.h
+++ b/arch/m68k/include/asm/mcfdma.h
diff --git a/arch/m68knommu/include/asm/mcfmbus.h b/arch/m68k/include/asm/mcfmbus.h
index 319899c47a2c..319899c47a2c 100644
--- a/arch/m68knommu/include/asm/mcfmbus.h
+++ b/arch/m68k/include/asm/mcfmbus.h
diff --git a/arch/m68knommu/include/asm/mcfne.h b/arch/m68k/include/asm/mcfne.h
index 431f63aadd0e..431f63aadd0e 100644
--- a/arch/m68knommu/include/asm/mcfne.h
+++ b/arch/m68k/include/asm/mcfne.h
diff --git a/arch/m68knommu/include/asm/mcfpci.h b/arch/m68k/include/asm/mcfpci.h
index f1507dd06ec6..f1507dd06ec6 100644
--- a/arch/m68knommu/include/asm/mcfpci.h
+++ b/arch/m68k/include/asm/mcfpci.h
diff --git a/arch/m68knommu/include/asm/mcfpit.h b/arch/m68k/include/asm/mcfpit.h
index f570cf64fd29..f570cf64fd29 100644
--- a/arch/m68knommu/include/asm/mcfpit.h
+++ b/arch/m68k/include/asm/mcfpit.h
diff --git a/arch/m68knommu/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h
index da3f2ceff3a4..da3f2ceff3a4 100644
--- a/arch/m68knommu/include/asm/mcfsim.h
+++ b/arch/m68k/include/asm/mcfsim.h
diff --git a/arch/m68knommu/include/asm/mcfsmc.h b/arch/m68k/include/asm/mcfsmc.h
index 2d7a4dbd9683..2d7a4dbd9683 100644
--- a/arch/m68knommu/include/asm/mcfsmc.h
+++ b/arch/m68k/include/asm/mcfsmc.h
diff --git a/arch/m68knommu/include/asm/mcftimer.h b/arch/m68k/include/asm/mcftimer.h
index 0f90f6d2227a..0f90f6d2227a 100644
--- a/arch/m68knommu/include/asm/mcftimer.h
+++ b/arch/m68k/include/asm/mcftimer.h
diff --git a/arch/m68knommu/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h
index ef2293873612..ef2293873612 100644
--- a/arch/m68knommu/include/asm/mcfuart.h
+++ b/arch/m68k/include/asm/mcfuart.h
diff --git a/arch/m68knommu/include/asm/mcfwdebug.h b/arch/m68k/include/asm/mcfwdebug.h
index 27f70e45d700..27f70e45d700 100644
--- a/arch/m68knommu/include/asm/mcfwdebug.h
+++ b/arch/m68k/include/asm/mcfwdebug.h
diff --git a/include/asm-m68k/md.h b/arch/m68k/include/asm/md.h
index d2f78f226f3d..d2f78f226f3d 100644
--- a/include/asm-m68k/md.h
+++ b/arch/m68k/include/asm/md.h
diff --git a/include/asm-m68k/mman.h b/arch/m68k/include/asm/mman.h
index 1626d37f4898..1626d37f4898 100644
--- a/include/asm-m68k/mman.h
+++ b/arch/m68k/include/asm/mman.h
diff --git a/arch/m68k/include/asm/mmu.h b/arch/m68k/include/asm/mmu.h
new file mode 100644
index 000000000000..a81d3946675f
--- /dev/null
+++ b/arch/m68k/include/asm/mmu.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "mmu_no.h"
+#else
+#include "mmu_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/mmu_context.h b/arch/m68k/include/asm/mmu_context.h
new file mode 100644
index 000000000000..b440928fc6c7
--- /dev/null
+++ b/arch/m68k/include/asm/mmu_context.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "mmu_context_no.h"
+#else
+#include "mmu_context_mm.h"
+#endif
diff --git a/include/asm-m68k/mmu_context.h b/arch/m68k/include/asm/mmu_context_mm.h
index 894dacbcee14..894dacbcee14 100644
--- a/include/asm-m68k/mmu_context.h
+++ b/arch/m68k/include/asm/mmu_context_mm.h
diff --git a/arch/m68knommu/include/asm/mmu_context.h b/arch/m68k/include/asm/mmu_context_no.h
index 9ccee4278c97..9ccee4278c97 100644
--- a/arch/m68knommu/include/asm/mmu_context.h
+++ b/arch/m68k/include/asm/mmu_context_no.h
diff --git a/include/asm-m68k/mmu.h b/arch/m68k/include/asm/mmu_mm.h
index ccd36d26615a..ccd36d26615a 100644
--- a/include/asm-m68k/mmu.h
+++ b/arch/m68k/include/asm/mmu_mm.h
diff --git a/arch/m68knommu/include/asm/mmu.h b/arch/m68k/include/asm/mmu_no.h
index e2da1e6f09fe..e2da1e6f09fe 100644
--- a/arch/m68knommu/include/asm/mmu.h
+++ b/arch/m68k/include/asm/mmu_no.h
diff --git a/include/asm-m68k/mmzone.h b/arch/m68k/include/asm/mmzone.h
index e1f1ec7b7006..e1f1ec7b7006 100644
--- a/include/asm-m68k/mmzone.h
+++ b/arch/m68k/include/asm/mmzone.h
diff --git a/arch/m68k/include/asm/module.h b/arch/m68k/include/asm/module.h
new file mode 100644
index 000000000000..79b59d137dd0
--- /dev/null
+++ b/arch/m68k/include/asm/module.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "module_no.h"
+#else
+#include "module_mm.h"
+#endif
diff --git a/include/asm-m68k/module.h b/arch/m68k/include/asm/module_mm.h
index 382d20a6fc18..382d20a6fc18 100644
--- a/include/asm-m68k/module.h
+++ b/arch/m68k/include/asm/module_mm.h
diff --git a/arch/m68knommu/include/asm/module.h b/arch/m68k/include/asm/module_no.h
index 2e45ab50b232..2e45ab50b232 100644
--- a/arch/m68knommu/include/asm/module.h
+++ b/arch/m68k/include/asm/module_no.h
diff --git a/include/asm-m68k/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h
index d08bf6261df8..d08bf6261df8 100644
--- a/include/asm-m68k/motorola_pgalloc.h
+++ b/arch/m68k/include/asm/motorola_pgalloc.h
diff --git a/include/asm-m68k/motorola_pgtable.h b/arch/m68k/include/asm/motorola_pgtable.h
index 8e9a8a754dde..8e9a8a754dde 100644
--- a/include/asm-m68k/motorola_pgtable.h
+++ b/arch/m68k/include/asm/motorola_pgtable.h
diff --git a/include/asm-m68k/movs.h b/arch/m68k/include/asm/movs.h
index 67dbea36960f..67dbea36960f 100644
--- a/include/asm-m68k/movs.h
+++ b/arch/m68k/include/asm/movs.h
diff --git a/include/asm-m68k/msgbuf.h b/arch/m68k/include/asm/msgbuf.h
index 243cb798de8f..243cb798de8f 100644
--- a/include/asm-m68k/msgbuf.h
+++ b/arch/m68k/include/asm/msgbuf.h
diff --git a/arch/m68knommu/include/asm/mutex.h b/arch/m68k/include/asm/mutex.h
index 458c1f7fbc18..458c1f7fbc18 100644
--- a/arch/m68knommu/include/asm/mutex.h
+++ b/arch/m68k/include/asm/mutex.h
diff --git a/include/asm-m68k/mvme147hw.h b/arch/m68k/include/asm/mvme147hw.h
index b81043108472..b81043108472 100644
--- a/include/asm-m68k/mvme147hw.h
+++ b/arch/m68k/include/asm/mvme147hw.h
diff --git a/include/asm-m68k/mvme16xhw.h b/arch/m68k/include/asm/mvme16xhw.h
index 6117f56653d2..6117f56653d2 100644
--- a/include/asm-m68k/mvme16xhw.h
+++ b/arch/m68k/include/asm/mvme16xhw.h
diff --git a/arch/m68knommu/include/asm/nettel.h b/arch/m68k/include/asm/nettel.h
index 0299f6a2deeb..0299f6a2deeb 100644
--- a/arch/m68knommu/include/asm/nettel.h
+++ b/arch/m68k/include/asm/nettel.h
diff --git a/include/asm-m68k/nubus.h b/arch/m68k/include/asm/nubus.h
index d6be9976f1ae..d6be9976f1ae 100644
--- a/include/asm-m68k/nubus.h
+++ b/arch/m68k/include/asm/nubus.h
diff --git a/include/asm-m68k/openprom.h b/arch/m68k/include/asm/openprom.h
index d33cdadf78e1..d33cdadf78e1 100644
--- a/include/asm-m68k/openprom.h
+++ b/arch/m68k/include/asm/openprom.h
diff --git a/include/asm-m68k/oplib.h b/arch/m68k/include/asm/oplib.h
index f082d03336bd..f082d03336bd 100644
--- a/include/asm-m68k/oplib.h
+++ b/arch/m68k/include/asm/oplib.h
diff --git a/arch/m68k/include/asm/page.h b/arch/m68k/include/asm/page.h
new file mode 100644
index 000000000000..f2b4480cc98a
--- /dev/null
+++ b/arch/m68k/include/asm/page.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "page_no.h"
+#else
+#include "page_mm.h"
+#endif
diff --git a/include/asm-m68k/page.h b/arch/m68k/include/asm/page_mm.h
index a34b8bad7847..a34b8bad7847 100644
--- a/include/asm-m68k/page.h
+++ b/arch/m68k/include/asm/page_mm.h
diff --git a/arch/m68knommu/include/asm/page.h b/arch/m68k/include/asm/page_no.h
index 3a1ede4544cb..3a1ede4544cb 100644
--- a/arch/m68knommu/include/asm/page.h
+++ b/arch/m68k/include/asm/page_no.h
diff --git a/arch/m68k/include/asm/page_offset.h b/arch/m68k/include/asm/page_offset.h
new file mode 100644
index 000000000000..66455c849fbb
--- /dev/null
+++ b/arch/m68k/include/asm/page_offset.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "page_offset_no.h"
+#else
+#include "page_offset_mm.h"
+#endif
diff --git a/include/asm-m68k/page_offset.h b/arch/m68k/include/asm/page_offset_mm.h
index 1cbdb7f30ac2..1cbdb7f30ac2 100644
--- a/include/asm-m68k/page_offset.h
+++ b/arch/m68k/include/asm/page_offset_mm.h
diff --git a/arch/m68knommu/include/asm/page_offset.h b/arch/m68k/include/asm/page_offset_no.h
index d4e73e0ba646..d4e73e0ba646 100644
--- a/arch/m68knommu/include/asm/page_offset.h
+++ b/arch/m68k/include/asm/page_offset_no.h
diff --git a/arch/m68k/include/asm/param.h b/arch/m68k/include/asm/param.h
new file mode 100644
index 000000000000..40d1112a4588
--- /dev/null
+++ b/arch/m68k/include/asm/param.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "param_no.h"
+#else
+#include "param_mm.h"
+#endif
diff --git a/include/asm-m68k/param.h b/arch/m68k/include/asm/param_mm.h
index 536a27888358..536a27888358 100644
--- a/include/asm-m68k/param.h
+++ b/arch/m68k/include/asm/param_mm.h
diff --git a/arch/m68knommu/include/asm/param.h b/arch/m68k/include/asm/param_no.h
index 6044397adb64..6044397adb64 100644
--- a/arch/m68knommu/include/asm/param.h
+++ b/arch/m68k/include/asm/param_no.h
diff --git a/include/asm-m68k/parport.h b/arch/m68k/include/asm/parport.h
index 646b1872f73b..646b1872f73b 100644
--- a/include/asm-m68k/parport.h
+++ b/arch/m68k/include/asm/parport.h
diff --git a/arch/m68k/include/asm/pci.h b/arch/m68k/include/asm/pci.h
new file mode 100644
index 000000000000..dbea95373080
--- /dev/null
+++ b/arch/m68k/include/asm/pci.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "pci_no.h"
+#else
+#include "pci_mm.h"
+#endif
diff --git a/include/asm-m68k/pci.h b/arch/m68k/include/asm/pci_mm.h
index 4ad0aea48ab4..4ad0aea48ab4 100644
--- a/include/asm-m68k/pci.h
+++ b/arch/m68k/include/asm/pci_mm.h
diff --git a/arch/m68knommu/include/asm/pci.h b/arch/m68k/include/asm/pci_no.h
index a13f3cc87451..9abbc03c73ee 100644
--- a/arch/m68knommu/include/asm/pci.h
+++ b/arch/m68k/include/asm/pci_no.h
@@ -1,7 +1,7 @@
 #ifndef M68KNOMMU_PCI_H
 #define M68KNOMMU_PCI_H
 
-#include <asm-m68k/pci.h>
+#include <asm/pci_mm.h>
 
 #ifdef CONFIG_COMEMPCI
 /*
diff --git a/include/asm-m68k/percpu.h b/arch/m68k/include/asm/percpu.h
index 0859d048faf5..0859d048faf5 100644
--- a/include/asm-m68k/percpu.h
+++ b/arch/m68k/include/asm/percpu.h
diff --git a/arch/m68k/include/asm/pgalloc.h b/arch/m68k/include/asm/pgalloc.h
new file mode 100644
index 000000000000..059cb73e78fc
--- /dev/null
+++ b/arch/m68k/include/asm/pgalloc.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "pgalloc_no.h"
+#else
+#include "pgalloc_mm.h"
+#endif
diff --git a/include/asm-m68k/pgalloc.h b/arch/m68k/include/asm/pgalloc_mm.h
index 4cb1a57ab763..4cb1a57ab763 100644
--- a/include/asm-m68k/pgalloc.h
+++ b/arch/m68k/include/asm/pgalloc_mm.h
diff --git a/arch/m68knommu/include/asm/pgalloc.h b/arch/m68k/include/asm/pgalloc_no.h
index d6352f671ec0..d6352f671ec0 100644
--- a/arch/m68knommu/include/asm/pgalloc.h
+++ b/arch/m68k/include/asm/pgalloc_no.h
diff --git a/arch/m68k/include/asm/pgtable.h b/arch/m68k/include/asm/pgtable.h
new file mode 100644
index 000000000000..ee6759eb445a
--- /dev/null
+++ b/arch/m68k/include/asm/pgtable.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "pgtable_no.h"
+#else
+#include "pgtable_mm.h"
+#endif
diff --git a/include/asm-m68k/pgtable.h b/arch/m68k/include/asm/pgtable_mm.h
index 0b604f0f192d..0b604f0f192d 100644
--- a/include/asm-m68k/pgtable.h
+++ b/arch/m68k/include/asm/pgtable_mm.h
diff --git a/arch/m68knommu/include/asm/pgtable.h b/arch/m68k/include/asm/pgtable_no.h
index 46251016e821..46251016e821 100644
--- a/arch/m68knommu/include/asm/pgtable.h
+++ b/arch/m68k/include/asm/pgtable_no.h
diff --git a/include/asm-m68k/poll.h b/arch/m68k/include/asm/poll.h
index f080fcdb61bf..f080fcdb61bf 100644
--- a/include/asm-m68k/poll.h
+++ b/arch/m68k/include/asm/poll.h
diff --git a/include/asm-m68k/posix_types.h b/arch/m68k/include/asm/posix_types.h
index 63cdcc142d93..63cdcc142d93 100644
--- a/include/asm-m68k/posix_types.h
+++ b/arch/m68k/include/asm/posix_types.h
diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
new file mode 100644
index 000000000000..fc3f2c22f2b8
--- /dev/null
+++ b/arch/m68k/include/asm/processor.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "processor_no.h"
+#else
+#include "processor_mm.h"
+#endif
diff --git a/include/asm-m68k/processor.h b/arch/m68k/include/asm/processor_mm.h
index 1f61ef53f0e0..1f61ef53f0e0 100644
--- a/include/asm-m68k/processor.h
+++ b/arch/m68k/include/asm/processor_mm.h
diff --git a/arch/m68knommu/include/asm/processor.h b/arch/m68k/include/asm/processor_no.h
index 91cba18acdd3..91cba18acdd3 100644
--- a/arch/m68knommu/include/asm/processor.h
+++ b/arch/m68k/include/asm/processor_no.h
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
new file mode 100644
index 000000000000..e83cd2f66101
--- /dev/null
+++ b/arch/m68k/include/asm/ptrace.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "ptrace_no.h"
+#else
+#include "ptrace_mm.h"
+#endif
diff --git a/include/asm-m68k/ptrace.h b/arch/m68k/include/asm/ptrace_mm.h
index 57e763d79bf4..57e763d79bf4 100644
--- a/include/asm-m68k/ptrace.h
+++ b/arch/m68k/include/asm/ptrace_mm.h
diff --git a/arch/m68knommu/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace_no.h
index 8c9194b98548..8c9194b98548 100644
--- a/arch/m68knommu/include/asm/ptrace.h
+++ b/arch/m68k/include/asm/ptrace_no.h
diff --git a/include/asm-m68k/q40_master.h b/arch/m68k/include/asm/q40_master.h
index 3907a09d4fca..3907a09d4fca 100644
--- a/include/asm-m68k/q40_master.h
+++ b/arch/m68k/include/asm/q40_master.h
diff --git a/include/asm-m68k/q40ints.h b/arch/m68k/include/asm/q40ints.h
index 3d970afb708f..3d970afb708f 100644
--- a/include/asm-m68k/q40ints.h
+++ b/arch/m68k/include/asm/q40ints.h
diff --git a/arch/m68knommu/include/asm/quicc_simple.h b/arch/m68k/include/asm/quicc_simple.h
index c3636932d4bc..c3636932d4bc 100644
--- a/arch/m68knommu/include/asm/quicc_simple.h
+++ b/arch/m68k/include/asm/quicc_simple.h
diff --git a/include/asm-m68k/raw_io.h b/arch/m68k/include/asm/raw_io.h
index d9eb9834ccc8..d9eb9834ccc8 100644
--- a/include/asm-m68k/raw_io.h
+++ b/arch/m68k/include/asm/raw_io.h
diff --git a/include/asm-m68k/resource.h b/arch/m68k/include/asm/resource.h
index e7d35019f337..e7d35019f337 100644
--- a/include/asm-m68k/resource.h
+++ b/arch/m68k/include/asm/resource.h
diff --git a/include/asm-m68k/rtc.h b/arch/m68k/include/asm/rtc.h
index 5d3e03859844..5d3e03859844 100644
--- a/include/asm-m68k/rtc.h
+++ b/arch/m68k/include/asm/rtc.h
diff --git a/include/asm-m68k/sbus.h b/arch/m68k/include/asm/sbus.h
index bfe3ba147f2e..bfe3ba147f2e 100644
--- a/include/asm-m68k/sbus.h
+++ b/arch/m68k/include/asm/sbus.h
diff --git a/arch/m68k/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist.h
new file mode 100644
index 000000000000..b7e528636252
--- /dev/null
+++ b/arch/m68k/include/asm/scatterlist.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "scatterlist_no.h"
+#else
+#include "scatterlist_mm.h"
+#endif
diff --git a/include/asm-m68k/scatterlist.h b/arch/m68k/include/asm/scatterlist_mm.h
index d3a7a0edfeca..d3a7a0edfeca 100644
--- a/include/asm-m68k/scatterlist.h
+++ b/arch/m68k/include/asm/scatterlist_mm.h
diff --git a/arch/m68knommu/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist_no.h
index afc4788b0d2c..afc4788b0d2c 100644
--- a/arch/m68knommu/include/asm/scatterlist.h
+++ b/arch/m68k/include/asm/scatterlist_no.h
diff --git a/include/asm-m68k/sections.h b/arch/m68k/include/asm/sections.h
index d64967ecfec6..d64967ecfec6 100644
--- a/include/asm-m68k/sections.h
+++ b/arch/m68k/include/asm/sections.h
diff --git a/arch/m68k/include/asm/segment.h b/arch/m68k/include/asm/segment.h
new file mode 100644
index 000000000000..82583bc004bd
--- /dev/null
+++ b/arch/m68k/include/asm/segment.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "segment_no.h"
+#else
+#include "segment_mm.h"
+#endif
diff --git a/include/asm-m68k/segment.h b/arch/m68k/include/asm/segment_mm.h
index 7b0b2d3127f9..7b0b2d3127f9 100644
--- a/include/asm-m68k/segment.h
+++ b/arch/m68k/include/asm/segment_mm.h
diff --git a/arch/m68knommu/include/asm/segment.h b/arch/m68k/include/asm/segment_no.h
index 42318ebec7ec..42318ebec7ec 100644
--- a/arch/m68knommu/include/asm/segment.h
+++ b/arch/m68k/include/asm/segment_no.h
diff --git a/include/asm-m68k/sembuf.h b/arch/m68k/include/asm/sembuf.h
index 2308052a8c24..2308052a8c24 100644
--- a/include/asm-m68k/sembuf.h
+++ b/arch/m68k/include/asm/sembuf.h
diff --git a/include/asm-m68k/serial.h b/arch/m68k/include/asm/serial.h
index 2b90d6e69070..2b90d6e69070 100644
--- a/include/asm-m68k/serial.h
+++ b/arch/m68k/include/asm/serial.h
diff --git a/arch/m68k/include/asm/setup.h b/arch/m68k/include/asm/setup.h
new file mode 100644
index 000000000000..842f86f75ccd
--- /dev/null
+++ b/arch/m68k/include/asm/setup.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "setup_no.h"
+#else
+#include "setup_mm.h"
+#endif
diff --git a/include/asm-m68k/setup.h b/arch/m68k/include/asm/setup_mm.h
index 4dfb3952b375..4dfb3952b375 100644
--- a/include/asm-m68k/setup.h
+++ b/arch/m68k/include/asm/setup_mm.h
diff --git a/arch/m68knommu/include/asm/setup.h b/arch/m68k/include/asm/setup_no.h
index fb86bb2a6078..45d286ce9398 100644
--- a/arch/m68knommu/include/asm/setup.h
+++ b/arch/m68k/include/asm/setup_no.h
@@ -1,6 +1,6 @@
 #ifdef __KERNEL__
 
-#include <asm-m68k/setup.h>
+#include <asm/setup_mm.h>
 
 /* We have a bigger command line buffer. */
 #undef COMMAND_LINE_SIZE
diff --git a/include/asm-m68k/shm.h b/arch/m68k/include/asm/shm.h
index fa56ec84a126..fa56ec84a126 100644
--- a/include/asm-m68k/shm.h
+++ b/arch/m68k/include/asm/shm.h
diff --git a/include/asm-m68k/shmbuf.h b/arch/m68k/include/asm/shmbuf.h
index f8928d62f1b7..f8928d62f1b7 100644
--- a/include/asm-m68k/shmbuf.h
+++ b/arch/m68k/include/asm/shmbuf.h
diff --git a/include/asm-m68k/shmparam.h b/arch/m68k/include/asm/shmparam.h
index 558892a2efb3..558892a2efb3 100644
--- a/include/asm-m68k/shmparam.h
+++ b/arch/m68k/include/asm/shmparam.h
diff --git a/arch/m68k/include/asm/sigcontext.h b/arch/m68k/include/asm/sigcontext.h
new file mode 100644
index 000000000000..bff6d40345a9
--- /dev/null
+++ b/arch/m68k/include/asm/sigcontext.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "sigcontext_no.h"
+#else
+#include "sigcontext_mm.h"
+#endif
diff --git a/include/asm-m68k/sigcontext.h b/arch/m68k/include/asm/sigcontext_mm.h
index 64fbe34cf26f..64fbe34cf26f 100644
--- a/include/asm-m68k/sigcontext.h
+++ b/arch/m68k/include/asm/sigcontext_mm.h
diff --git a/arch/m68knommu/include/asm/sigcontext.h b/arch/m68k/include/asm/sigcontext_no.h
index 36c293fc133d..36c293fc133d 100644
--- a/arch/m68knommu/include/asm/sigcontext.h
+++ b/arch/m68k/include/asm/sigcontext_no.h
diff --git a/arch/m68k/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo.h
new file mode 100644
index 000000000000..61219d7affc8
--- /dev/null
+++ b/arch/m68k/include/asm/siginfo.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "siginfo_no.h"
+#else
+#include "siginfo_mm.h"
+#endif
diff --git a/include/asm-m68k/siginfo.h b/arch/m68k/include/asm/siginfo_mm.h
index 05a8d6d90b58..05a8d6d90b58 100644
--- a/include/asm-m68k/siginfo.h
+++ b/arch/m68k/include/asm/siginfo_mm.h
diff --git a/arch/m68knommu/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo_no.h
index b18e5f4064ae..b18e5f4064ae 100644
--- a/arch/m68knommu/include/asm/siginfo.h
+++ b/arch/m68k/include/asm/siginfo_no.h
diff --git a/arch/m68k/include/asm/signal.h b/arch/m68k/include/asm/signal.h
new file mode 100644
index 000000000000..3c19988bd93c
--- /dev/null
+++ b/arch/m68k/include/asm/signal.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "signal_no.h"
+#else
+#include "signal_mm.h"
+#endif
diff --git a/include/asm-m68k/signal.h b/arch/m68k/include/asm/signal_mm.h
index 3db8a81942f1..3db8a81942f1 100644
--- a/include/asm-m68k/signal.h
+++ b/arch/m68k/include/asm/signal_mm.h
diff --git a/arch/m68knommu/include/asm/signal.h b/arch/m68k/include/asm/signal_no.h
index 216c08be54a0..216c08be54a0 100644
--- a/arch/m68knommu/include/asm/signal.h
+++ b/arch/m68k/include/asm/signal_no.h
diff --git a/arch/m68knommu/include/asm/smp.h b/arch/m68k/include/asm/smp.h
index 9e9bd7e58922..9e9bd7e58922 100644
--- a/arch/m68knommu/include/asm/smp.h
+++ b/arch/m68k/include/asm/smp.h
diff --git a/include/asm-m68k/socket.h b/arch/m68k/include/asm/socket.h
index dbc64e92c41a..dbc64e92c41a 100644
--- a/include/asm-m68k/socket.h
+++ b/arch/m68k/include/asm/socket.h
diff --git a/include/asm-m68k/sockios.h b/arch/m68k/include/asm/sockios.h
index c04a23943cb7..c04a23943cb7 100644
--- a/include/asm-m68k/sockios.h
+++ b/arch/m68k/include/asm/sockios.h
diff --git a/include/asm-m68k/spinlock.h b/arch/m68k/include/asm/spinlock.h
index 20f46e27b534..20f46e27b534 100644
--- a/include/asm-m68k/spinlock.h
+++ b/arch/m68k/include/asm/spinlock.h
diff --git a/include/asm-m68k/stat.h b/arch/m68k/include/asm/stat.h
index dd38bc2e9f98..dd38bc2e9f98 100644
--- a/include/asm-m68k/stat.h
+++ b/arch/m68k/include/asm/stat.h
diff --git a/include/asm-m68k/statfs.h b/arch/m68k/include/asm/statfs.h
index 08d93f14e061..08d93f14e061 100644
--- a/include/asm-m68k/statfs.h
+++ b/arch/m68k/include/asm/statfs.h
diff --git a/arch/m68k/include/asm/string.h b/arch/m68k/include/asm/string.h
new file mode 100644
index 000000000000..2c356f90f171
--- /dev/null
+++ b/arch/m68k/include/asm/string.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "string_no.h"
+#else
+#include "string_mm.h"
+#endif
diff --git a/include/asm-m68k/string.h b/arch/m68k/include/asm/string_mm.h
index 2eb7df1e0f5d..2eb7df1e0f5d 100644
--- a/include/asm-m68k/string.h
+++ b/arch/m68k/include/asm/string_mm.h
diff --git a/arch/m68knommu/include/asm/string.h b/arch/m68k/include/asm/string_no.h
index af09e17000fc..af09e17000fc 100644
--- a/arch/m68knommu/include/asm/string.h
+++ b/arch/m68k/include/asm/string_no.h
diff --git a/include/asm-m68k/sun3-head.h b/arch/m68k/include/asm/sun3-head.h
index 05af2f18b3bd..05af2f18b3bd 100644
--- a/include/asm-m68k/sun3-head.h
+++ b/arch/m68k/include/asm/sun3-head.h
diff --git a/include/asm-m68k/sun3_pgalloc.h b/arch/m68k/include/asm/sun3_pgalloc.h
index d4c83f143816..d4c83f143816 100644
--- a/include/asm-m68k/sun3_pgalloc.h
+++ b/arch/m68k/include/asm/sun3_pgalloc.h
diff --git a/include/asm-m68k/sun3_pgtable.h b/arch/m68k/include/asm/sun3_pgtable.h
index f847ec732d62..f847ec732d62 100644
--- a/include/asm-m68k/sun3_pgtable.h
+++ b/arch/m68k/include/asm/sun3_pgtable.h
diff --git a/include/asm-m68k/sun3ints.h b/arch/m68k/include/asm/sun3ints.h
index 309d6e6a1374..309d6e6a1374 100644
--- a/include/asm-m68k/sun3ints.h
+++ b/arch/m68k/include/asm/sun3ints.h
diff --git a/include/asm-m68k/sun3mmu.h b/arch/m68k/include/asm/sun3mmu.h
index d8f17a0d8c9f..d8f17a0d8c9f 100644
--- a/include/asm-m68k/sun3mmu.h
+++ b/arch/m68k/include/asm/sun3mmu.h
diff --git a/include/asm-m68k/sun3x.h b/arch/m68k/include/asm/sun3x.h
index f5691a1ed7cc..f5691a1ed7cc 100644
--- a/include/asm-m68k/sun3x.h
+++ b/arch/m68k/include/asm/sun3x.h
diff --git a/include/asm-m68k/sun3xflop.h b/arch/m68k/include/asm/sun3xflop.h
index 32c45f84ac60..32c45f84ac60 100644
--- a/include/asm-m68k/sun3xflop.h
+++ b/arch/m68k/include/asm/sun3xflop.h
diff --git a/include/asm-m68k/sun3xprom.h b/arch/m68k/include/asm/sun3xprom.h
index 6735efcf5f6d..6735efcf5f6d 100644
--- a/include/asm-m68k/sun3xprom.h
+++ b/arch/m68k/include/asm/sun3xprom.h
diff --git a/include/asm-m68k/suspend.h b/arch/m68k/include/asm/suspend.h
index 57b3ddb4d269..57b3ddb4d269 100644
--- a/include/asm-m68k/suspend.h
+++ b/arch/m68k/include/asm/suspend.h
diff --git a/arch/m68k/include/asm/swab.h b/arch/m68k/include/asm/swab.h
new file mode 100644
index 000000000000..7d7dde1c73ec
--- /dev/null
+++ b/arch/m68k/include/asm/swab.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "swab_no.h"
+#else
+#include "swab_mm.h"
+#endif
diff --git a/include/asm-m68k/swab.h b/arch/m68k/include/asm/swab_mm.h
index 7221e3066825..7221e3066825 100644
--- a/include/asm-m68k/swab.h
+++ b/arch/m68k/include/asm/swab_mm.h
diff --git a/arch/m68knommu/include/asm/swab.h b/arch/m68k/include/asm/swab_no.h
index e582257db300..e582257db300 100644
--- a/arch/m68knommu/include/asm/swab.h
+++ b/arch/m68k/include/asm/swab_no.h
diff --git a/arch/m68k/include/asm/system.h b/arch/m68k/include/asm/system.h
new file mode 100644
index 000000000000..ccea925ff4f5
--- /dev/null
+++ b/arch/m68k/include/asm/system.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "system_no.h"
+#else
+#include "system_mm.h"
+#endif
diff --git a/include/asm-m68k/system.h b/arch/m68k/include/asm/system_mm.h
index dbb6515ffd5b..dbb6515ffd5b 100644
--- a/include/asm-m68k/system.h
+++ b/arch/m68k/include/asm/system_mm.h
diff --git a/arch/m68knommu/include/asm/system.h b/arch/m68k/include/asm/system_no.h
index 40f49de69821..40f49de69821 100644
--- a/arch/m68knommu/include/asm/system.h
+++ b/arch/m68k/include/asm/system_no.h
diff --git a/include/asm-m68k/termbits.h b/arch/m68k/include/asm/termbits.h
index 8c14170996bb..8c14170996bb 100644
--- a/include/asm-m68k/termbits.h
+++ b/arch/m68k/include/asm/termbits.h
diff --git a/include/asm-m68k/termios.h b/arch/m68k/include/asm/termios.h
index 0823032e4045..0823032e4045 100644
--- a/include/asm-m68k/termios.h
+++ b/arch/m68k/include/asm/termios.h
diff --git a/arch/m68k/include/asm/thread_info.h b/arch/m68k/include/asm/thread_info.h
new file mode 100644
index 000000000000..f31a3f42b7b3
--- /dev/null
+++ b/arch/m68k/include/asm/thread_info.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "thread_info_no.h"
+#else
+#include "thread_info_mm.h"
+#endif
diff --git a/include/asm-m68k/thread_info.h b/arch/m68k/include/asm/thread_info_mm.h
index af0fda46e94b..af0fda46e94b 100644
--- a/include/asm-m68k/thread_info.h
+++ b/arch/m68k/include/asm/thread_info_mm.h
diff --git a/arch/m68knommu/include/asm/thread_info.h b/arch/m68k/include/asm/thread_info_no.h
index 82529f424ea3..82529f424ea3 100644
--- a/arch/m68knommu/include/asm/thread_info.h
+++ b/arch/m68k/include/asm/thread_info_no.h
diff --git a/arch/m68k/include/asm/timex.h b/arch/m68k/include/asm/timex.h
new file mode 100644
index 000000000000..719762980578
--- /dev/null
+++ b/arch/m68k/include/asm/timex.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "timex_no.h"
+#else
+#include "timex_mm.h"
+#endif
diff --git a/include/asm-m68k/timex.h b/arch/m68k/include/asm/timex_mm.h
index b87f2f278f67..b87f2f278f67 100644
--- a/include/asm-m68k/timex.h
+++ b/arch/m68k/include/asm/timex_mm.h
diff --git a/arch/m68knommu/include/asm/timex.h b/arch/m68k/include/asm/timex_no.h
index 109050f3fe91..109050f3fe91 100644
--- a/arch/m68knommu/include/asm/timex.h
+++ b/arch/m68k/include/asm/timex_no.h
diff --git a/include/asm-m68k/tlb.h b/arch/m68k/include/asm/tlb.h
index 1785cff73449..1785cff73449 100644
--- a/include/asm-m68k/tlb.h
+++ b/arch/m68k/include/asm/tlb.h
diff --git a/arch/m68k/include/asm/tlbflush.h b/arch/m68k/include/asm/tlbflush.h
new file mode 100644
index 000000000000..b6f93b30951e
--- /dev/null
+++ b/arch/m68k/include/asm/tlbflush.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "tlbflush_no.h"
+#else
+#include "tlbflush_mm.h"
+#endif
diff --git a/include/asm-m68k/tlbflush.h b/arch/m68k/include/asm/tlbflush_mm.h
index acb6bf21a321..acb6bf21a321 100644
--- a/include/asm-m68k/tlbflush.h
+++ b/arch/m68k/include/asm/tlbflush_mm.h
diff --git a/arch/m68knommu/include/asm/tlbflush.h b/arch/m68k/include/asm/tlbflush_no.h
index a470cfb803eb..a470cfb803eb 100644
--- a/arch/m68knommu/include/asm/tlbflush.h
+++ b/arch/m68k/include/asm/tlbflush_no.h
diff --git a/arch/m68knommu/include/asm/topology.h b/arch/m68k/include/asm/topology.h
index ca173e9f26ff..ca173e9f26ff 100644
--- a/arch/m68knommu/include/asm/topology.h
+++ b/arch/m68k/include/asm/topology.h
diff --git a/arch/m68k/include/asm/traps.h b/arch/m68k/include/asm/traps.h
new file mode 100644
index 000000000000..3011ec0f5365
--- /dev/null
+++ b/arch/m68k/include/asm/traps.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "traps_no.h"
+#else
+#include "traps_mm.h"
+#endif
diff --git a/include/asm-m68k/traps.h b/arch/m68k/include/asm/traps_mm.h
index 8caef25624c7..8caef25624c7 100644
--- a/include/asm-m68k/traps.h
+++ b/arch/m68k/include/asm/traps_mm.h
diff --git a/arch/m68knommu/include/asm/traps.h b/arch/m68k/include/asm/traps_no.h
index d0671e5f8e29..d0671e5f8e29 100644
--- a/arch/m68knommu/include/asm/traps.h
+++ b/arch/m68k/include/asm/traps_no.h
diff --git a/include/asm-m68k/types.h b/arch/m68k/include/asm/types.h
index 6441cb5f8e7c..6441cb5f8e7c 100644
--- a/include/asm-m68k/types.h
+++ b/arch/m68k/include/asm/types.h
diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h
new file mode 100644
index 000000000000..38f92dbb9a45
--- /dev/null
+++ b/arch/m68k/include/asm/uaccess.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "uaccess_no.h"
+#else
+#include "uaccess_mm.h"
+#endif
diff --git a/include/asm-m68k/uaccess.h b/arch/m68k/include/asm/uaccess_mm.h
index 7107f3fbdbb6..7107f3fbdbb6 100644
--- a/include/asm-m68k/uaccess.h
+++ b/arch/m68k/include/asm/uaccess_mm.h
diff --git a/arch/m68knommu/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess_no.h
index 68bbe9b312f1..68bbe9b312f1 100644
--- a/arch/m68knommu/include/asm/uaccess.h
+++ b/arch/m68k/include/asm/uaccess_no.h
diff --git a/arch/m68k/include/asm/ucontext.h b/arch/m68k/include/asm/ucontext.h
new file mode 100644
index 000000000000..b53cd160c0b3
--- /dev/null
+++ b/arch/m68k/include/asm/ucontext.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "ucontext_no.h"
+#else
+#include "ucontext_mm.h"
+#endif
diff --git a/include/asm-m68k/ucontext.h b/arch/m68k/include/asm/ucontext_mm.h
index e4e22669edc0..e4e22669edc0 100644
--- a/include/asm-m68k/ucontext.h
+++ b/arch/m68k/include/asm/ucontext_mm.h
diff --git a/arch/m68knommu/include/asm/ucontext.h b/arch/m68k/include/asm/ucontext_no.h
index 713a27f901cd..713a27f901cd 100644
--- a/arch/m68knommu/include/asm/ucontext.h
+++ b/arch/m68k/include/asm/ucontext_no.h
diff --git a/arch/m68k/include/asm/unaligned.h b/arch/m68k/include/asm/unaligned.h
new file mode 100644
index 000000000000..c640bba3bdf4
--- /dev/null
+++ b/arch/m68k/include/asm/unaligned.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "unaligned_no.h"
+#else
+#include "unaligned_mm.h"
+#endif
diff --git a/include/asm-m68k/unaligned.h b/arch/m68k/include/asm/unaligned_mm.h
index 77698f2dc33c..77698f2dc33c 100644
--- a/include/asm-m68k/unaligned.h
+++ b/arch/m68k/include/asm/unaligned_mm.h
diff --git a/arch/m68knommu/include/asm/unaligned.h b/arch/m68k/include/asm/unaligned_no.h
index eb1ea4cb9a59..eb1ea4cb9a59 100644
--- a/arch/m68knommu/include/asm/unaligned.h
+++ b/arch/m68k/include/asm/unaligned_no.h
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
new file mode 100644
index 000000000000..df1d9d4cb1fd
--- /dev/null
+++ b/arch/m68k/include/asm/unistd.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "unistd_no.h"
+#else
+#include "unistd_mm.h"
+#endif
diff --git a/include/asm-m68k/unistd.h b/arch/m68k/include/asm/unistd_mm.h
index 3c19027331fa..3c19027331fa 100644
--- a/include/asm-m68k/unistd.h
+++ b/arch/m68k/include/asm/unistd_mm.h
diff --git a/arch/m68knommu/include/asm/unistd.h b/arch/m68k/include/asm/unistd_no.h
index b034a2f7b444..b034a2f7b444 100644
--- a/arch/m68knommu/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd_no.h
diff --git a/include/asm-m68k/user.h b/arch/m68k/include/asm/user.h
index f1f478d6e050..f1f478d6e050 100644
--- a/include/asm-m68k/user.h
+++ b/arch/m68k/include/asm/user.h
diff --git a/include/asm-m68k/virtconvert.h b/arch/m68k/include/asm/virtconvert.h
index 22ab05c9c52b..22ab05c9c52b 100644
--- a/include/asm-m68k/virtconvert.h
+++ b/arch/m68k/include/asm/virtconvert.h
diff --git a/include/asm-m68k/xor.h b/arch/m68k/include/asm/xor.h
index c82eb12a5b18..c82eb12a5b18 100644
--- a/include/asm-m68k/xor.h
+++ b/arch/m68k/include/asm/xor.h
diff --git a/include/asm-m68k/zorro.h b/arch/m68k/include/asm/zorro.h
index 5ce97c22b582..5ce97c22b582 100644
--- a/include/asm-m68k/zorro.h
+++ b/arch/m68k/include/asm/zorro.h
diff --git a/arch/m68knommu/include/asm/Kbuild b/arch/m68knommu/include/asm/Kbuild
deleted file mode 100644
index c68e1680da01..000000000000
--- a/arch/m68knommu/include/asm/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-include include/asm-generic/Kbuild.asm
diff --git a/arch/m68knommu/include/asm/byteorder.h b/arch/m68knommu/include/asm/byteorder.h
deleted file mode 100644
index 9c6c76a15041..000000000000
--- a/arch/m68knommu/include/asm/byteorder.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68KNOMMU_BYTEORDER_H
-#define _M68KNOMMU_BYTEORDER_H
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _M68KNOMMU_BYTEORDER_H */
diff --git a/arch/m68knommu/include/asm/cachectl.h b/arch/m68knommu/include/asm/cachectl.h
deleted file mode 100644
index bcf5a6a9dd52..000000000000
--- a/arch/m68knommu/include/asm/cachectl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/cachectl.h>
diff --git a/arch/m68knommu/include/asm/cputime.h b/arch/m68knommu/include/asm/cputime.h
deleted file mode 100644
index a0c4a660878d..000000000000
--- a/arch/m68knommu/include/asm/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __M68KNOMMU_CPUTIME_H
-#define __M68KNOMMU_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __M68KNOMMU_CPUTIME_H */
diff --git a/arch/m68knommu/include/asm/errno.h b/arch/m68knommu/include/asm/errno.h
deleted file mode 100644
index 7e8c22b9a5e6..000000000000
--- a/arch/m68knommu/include/asm/errno.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/errno.h>
diff --git a/arch/m68knommu/include/asm/fcntl.h b/arch/m68knommu/include/asm/fcntl.h
deleted file mode 100644
index f6a552cda4cd..000000000000
--- a/arch/m68knommu/include/asm/fcntl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/fcntl.h>
diff --git a/arch/m68knommu/include/asm/hwtest.h b/arch/m68knommu/include/asm/hwtest.h
deleted file mode 100644
index 700626a1b1bf..000000000000
--- a/arch/m68knommu/include/asm/hwtest.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/hwtest.h>
diff --git a/arch/m68knommu/include/asm/ioctls.h b/arch/m68knommu/include/asm/ioctls.h
deleted file mode 100644
index 0b1eb4d85059..000000000000
--- a/arch/m68knommu/include/asm/ioctls.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/ioctls.h>
diff --git a/arch/m68knommu/include/asm/ipcbuf.h b/arch/m68knommu/include/asm/ipcbuf.h
deleted file mode 100644
index e4a7be6dd706..000000000000
--- a/arch/m68knommu/include/asm/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/ipcbuf.h>
diff --git a/arch/m68knommu/include/asm/linkage.h b/arch/m68knommu/include/asm/linkage.h
deleted file mode 100644
index c288a19ff489..000000000000
--- a/arch/m68knommu/include/asm/linkage.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/linkage.h>
diff --git a/arch/m68knommu/include/asm/local.h b/arch/m68knommu/include/asm/local.h
deleted file mode 100644
index 84a39c1b86f8..000000000000
--- a/arch/m68knommu/include/asm/local.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __M68KNOMMU_LOCAL_H
-#define __M68KNOMMU_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __M68KNOMMU_LOCAL_H */
diff --git a/arch/m68knommu/include/asm/math-emu.h b/arch/m68knommu/include/asm/math-emu.h
deleted file mode 100644
index 7e7090517b72..000000000000
--- a/arch/m68knommu/include/asm/math-emu.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/math-emu.h>
diff --git a/arch/m68knommu/include/asm/md.h b/arch/m68knommu/include/asm/md.h
deleted file mode 100644
index d810c78de5ff..000000000000
--- a/arch/m68knommu/include/asm/md.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/md.h>
diff --git a/arch/m68knommu/include/asm/mman.h b/arch/m68knommu/include/asm/mman.h
deleted file mode 100644
index 4846c682efed..000000000000
--- a/arch/m68knommu/include/asm/mman.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/mman.h>
diff --git a/arch/m68knommu/include/asm/movs.h b/arch/m68knommu/include/asm/movs.h
deleted file mode 100644
index 81a16779e833..000000000000
--- a/arch/m68knommu/include/asm/movs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/movs.h>
diff --git a/arch/m68knommu/include/asm/msgbuf.h b/arch/m68knommu/include/asm/msgbuf.h
deleted file mode 100644
index bdfadec4d52d..000000000000
--- a/arch/m68knommu/include/asm/msgbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/msgbuf.h>
diff --git a/arch/m68knommu/include/asm/openprom.h b/arch/m68knommu/include/asm/openprom.h
deleted file mode 100644
index fdba7953ff9f..000000000000
--- a/arch/m68knommu/include/asm/openprom.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/openprom.h>
diff --git a/arch/m68knommu/include/asm/oplib.h b/arch/m68knommu/include/asm/oplib.h
deleted file mode 100644
index ce079dc332d9..000000000000
--- a/arch/m68knommu/include/asm/oplib.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/oplib.h>
diff --git a/arch/m68knommu/include/asm/percpu.h b/arch/m68knommu/include/asm/percpu.h
deleted file mode 100644
index 5de72c327efd..000000000000
--- a/arch/m68knommu/include/asm/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ARCH_M68KNOMMU_PERCPU__
-#define __ARCH_M68KNOMMU_PERCPU__
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_M68KNOMMU_PERCPU__ */
diff --git a/arch/m68knommu/include/asm/poll.h b/arch/m68knommu/include/asm/poll.h
deleted file mode 100644
index ee1b6cb549ca..000000000000
--- a/arch/m68knommu/include/asm/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/poll.h>
diff --git a/arch/m68knommu/include/asm/posix_types.h b/arch/m68knommu/include/asm/posix_types.h
deleted file mode 100644
index 6205fb9392a3..000000000000
--- a/arch/m68knommu/include/asm/posix_types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/posix_types.h>
diff --git a/arch/m68knommu/include/asm/resource.h b/arch/m68knommu/include/asm/resource.h
deleted file mode 100644
index 7fa63d5ea576..000000000000
--- a/arch/m68knommu/include/asm/resource.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/resource.h>
diff --git a/arch/m68knommu/include/asm/rtc.h b/arch/m68knommu/include/asm/rtc.h
deleted file mode 100644
index eaf18ec83c8e..000000000000
--- a/arch/m68knommu/include/asm/rtc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/rtc.h>
diff --git a/arch/m68knommu/include/asm/sections.h b/arch/m68knommu/include/asm/sections.h
deleted file mode 100644
index dd0ecb98ec08..000000000000
--- a/arch/m68knommu/include/asm/sections.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _M68KNOMMU_SECTIONS_H
-#define _M68KNOMMU_SECTIONS_H
-
-/* nothing to see, move along */
-#include <asm-generic/sections.h>
-
-#endif
diff --git a/arch/m68knommu/include/asm/sembuf.h b/arch/m68knommu/include/asm/sembuf.h
deleted file mode 100644
index 3a634f9ecf50..000000000000
--- a/arch/m68knommu/include/asm/sembuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/sembuf.h>
diff --git a/arch/m68knommu/include/asm/shm.h b/arch/m68knommu/include/asm/shm.h
deleted file mode 100644
index cc8e522d9050..000000000000
--- a/arch/m68knommu/include/asm/shm.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/shm.h>
diff --git a/arch/m68knommu/include/asm/shmbuf.h b/arch/m68knommu/include/asm/shmbuf.h
deleted file mode 100644
index bc34cf8eefce..000000000000
--- a/arch/m68knommu/include/asm/shmbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/shmbuf.h>
diff --git a/arch/m68knommu/include/asm/shmparam.h b/arch/m68knommu/include/asm/shmparam.h
deleted file mode 100644
index d7ee69648ebf..000000000000
--- a/arch/m68knommu/include/asm/shmparam.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/shmparam.h>
diff --git a/arch/m68knommu/include/asm/socket.h b/arch/m68knommu/include/asm/socket.h
deleted file mode 100644
index ac5478bf6371..000000000000
--- a/arch/m68knommu/include/asm/socket.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/socket.h>
diff --git a/arch/m68knommu/include/asm/sockios.h b/arch/m68knommu/include/asm/sockios.h
deleted file mode 100644
index dcc6a8900ce2..000000000000
--- a/arch/m68knommu/include/asm/sockios.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/sockios.h>
diff --git a/arch/m68knommu/include/asm/spinlock.h b/arch/m68knommu/include/asm/spinlock.h
deleted file mode 100644
index 6bb1f06c4781..000000000000
--- a/arch/m68knommu/include/asm/spinlock.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/spinlock.h>
diff --git a/arch/m68knommu/include/asm/stat.h b/arch/m68knommu/include/asm/stat.h
deleted file mode 100644
index 3d4b260e7c03..000000000000
--- a/arch/m68knommu/include/asm/stat.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/stat.h>
diff --git a/arch/m68knommu/include/asm/statfs.h b/arch/m68knommu/include/asm/statfs.h
deleted file mode 100644
index 2ce99eaf0970..000000000000
--- a/arch/m68knommu/include/asm/statfs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/statfs.h>
diff --git a/arch/m68knommu/include/asm/termbits.h b/arch/m68knommu/include/asm/termbits.h
deleted file mode 100644
index 05dd6bc27285..000000000000
--- a/arch/m68knommu/include/asm/termbits.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/termbits.h>
diff --git a/arch/m68knommu/include/asm/termios.h b/arch/m68knommu/include/asm/termios.h
deleted file mode 100644
index e7337881a985..000000000000
--- a/arch/m68knommu/include/asm/termios.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/termios.h>
diff --git a/arch/m68knommu/include/asm/tlb.h b/arch/m68knommu/include/asm/tlb.h
deleted file mode 100644
index 77a7c51ca299..000000000000
--- a/arch/m68knommu/include/asm/tlb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/tlb.h>
diff --git a/arch/m68knommu/include/asm/types.h b/arch/m68knommu/include/asm/types.h
deleted file mode 100644
index 031238c2d180..000000000000
--- a/arch/m68knommu/include/asm/types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/types.h>
diff --git a/arch/m68knommu/include/asm/user.h b/arch/m68knommu/include/asm/user.h
deleted file mode 100644
index a5a555b761c4..000000000000
--- a/arch/m68knommu/include/asm/user.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/user.h>
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index a3bbbf067a3b..783da855a2e3 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -959,7 +959,7 @@ CONFIG_I2C_SIBYTE=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 CONFIG_SENSORS_PCF8591=y
diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig
index 634bb4eaf132..fea9bc9865a3 100644
--- a/arch/mips/configs/emma2rh_defconfig
+++ b/arch/mips/configs/emma2rh_defconfig
@@ -996,7 +996,7 @@ CONFIG_I2C_CHARDEV=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig
index b6698a232ae9..786a9bc9a696 100644
--- a/arch/mips/configs/fulong_defconfig
+++ b/arch/mips/configs/fulong_defconfig
@@ -1006,8 +1006,8 @@ CONFIG_I2C_VIAPRO=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
index dd13db4d0fb9..84d6491b3d41 100644
--- a/arch/mips/configs/msp71xx_defconfig
+++ b/arch/mips/configs/msp71xx_defconfig
@@ -929,7 +929,7 @@ CONFIG_I2C_PMCMSP=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 CONFIG_PMCTWILED=y
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index db9272677aa2..8426d3b9501c 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -1845,7 +1845,7 @@ CONFIG_I2C_VOODOO3=m
 CONFIG_SENSORS_DS1337=m
 CONFIG_SENSORS_DS1374=m
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 CONFIG_SENSORS_PCA9539=m
 CONFIG_SENSORS_PCF8591=m
@@ -1872,7 +1872,7 @@ CONFIG_SPI_BUTTERFLY=m
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_W1=m
diff --git a/arch/mips/configs/pnx8335-stb225_defconfig b/arch/mips/configs/pnx8335-stb225_defconfig
index d9536522cff5..2728caa6c2fb 100644
--- a/arch/mips/configs/pnx8335-stb225_defconfig
+++ b/arch/mips/configs/pnx8335-stb225_defconfig
@@ -640,8 +640,8 @@ CONFIG_I2C_CHARDEV=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index c7c0864b8ce9..83d5c58662c8 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -522,7 +522,7 @@ CONFIG_SPI_TXX9=y
 #
 # SPI Protocol Masters
 #
-CONFIG_SPI_AT25=y
+CONFIG_EEPROM_AT25=y
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_HAVE_GPIO_LIB=y
 
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
index 15f48e03ec2e..ce28cd6f0d4f 100644
--- a/arch/powerpc/configs/44x/sam440ep_defconfig
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -730,8 +730,8 @@ CONFIG_I2C_IBM_IIC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 59cbd2761ed7..031ac6d4212f 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -660,8 +660,8 @@ CONFIG_I2C_HELPER_AUTO=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 3df627494b65..99c495ad9c75 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -629,8 +629,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index 5b969f9c925e..9796220032fd 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -762,8 +762,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index 3c0d4e561726..d081e0031057 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -629,8 +629,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 9d0207783d60..b21b8e8c3a78 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -740,8 +740,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=m
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index bc190051e8d5..79954579f5ec 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -645,8 +645,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index cbecaf3d7906..b3d9d1a8dfaf 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -732,8 +732,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index bfc32ea265a7..6293bb99b52e 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -858,8 +858,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -884,7 +884,7 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index aad0e1a98c55..c7cceb4536d8 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -919,8 +919,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -945,7 +945,7 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 9cb8c8b956e4..5e3cd49a2e9c 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -730,8 +730,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index 9cc976f010c9..90c482606880 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -745,8 +745,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -770,7 +770,7 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index 07a674f5344e..42b7f3403fb0 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -898,8 +898,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -923,7 +923,7 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index 426232cb0097..17c903b36576 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -778,8 +778,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -803,7 +803,7 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index 36e2e93a1c53..728fc95d5870 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -673,8 +673,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index 80eb6c9a05c4..f7546e7cb762 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -805,8 +805,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index b9b236806e9f..b94972f52241 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -723,8 +723,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -749,7 +749,7 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index f6350d7e1688..ad97649bdc73 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -787,8 +787,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index f447de16f75d..2e526beeeb90 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -789,8 +789,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 8d2d7eeab5f5..54bb24a5e02a 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -640,8 +640,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
index e243e14a6708..256055cb6d2f 100644
--- a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
@@ -849,8 +849,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
index f6cb01495ea6..5ac7e51e9f14 100644
--- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
@@ -848,8 +848,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
index 597be8491812..ab5b0b58924c 100644
--- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
@@ -723,8 +723,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
index 32aeb79216f7..65ef823e08c6 100644
--- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
@@ -861,8 +861,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index 5a0cf58d2b8c..f1288a0c3040 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -877,8 +877,8 @@ CONFIG_I2C_HELPER_AUTO=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index f3e4f3481fda..b3b1de6a6a85 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -787,8 +787,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index c62489394535..a92a639cdf8a 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -796,8 +796,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index eef45b97dc3e..397d37fbe7e3 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -806,8 +806,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index 11b637e99a54..856ca6ab37b7 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -796,8 +796,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index 2519169b6d4b..56ed4213609c 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -796,8 +796,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 391874c7b436..840b09a07282 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1081,8 +1081,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 CONFIG_DS1682=y
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index 72854a10dfa1..25bf4e95acb8 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -905,8 +905,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 41220ece603d..8e0f0e5180a4 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -851,8 +851,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index a4342862f6ef..37d9f4ed80f5 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -958,8 +958,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 5078594cd1f5..74c6feabdd77 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1124,8 +1124,8 @@ CONFIG_I2C_MV64XXX=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=m
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index c420e47426f8..c6d2baa7aaeb 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1012,7 +1012,7 @@ CONFIG_I2C_ALGOBIT=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/powerpc/configs/celleb_defconfig b/arch/powerpc/configs/celleb_defconfig
index 9ba3c6fc2fef..d2123779512a 100644
--- a/arch/powerpc/configs/celleb_defconfig
+++ b/arch/powerpc/configs/celleb_defconfig
@@ -834,7 +834,7 @@ CONFIG_I2C_ALGOBIT=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 63b3c2372ce8..5094a65a4493 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -941,8 +941,8 @@ CONFIG_I2C_ALGOBIT=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index f85e71ccb989..fc905924c022 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -994,8 +994,8 @@ CONFIG_I2C_POWERMAC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 54fa62481373..3a0ffd73b65c 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1015,8 +1015,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=m
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 045f1b008ce5..8b244003b9e1 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -866,8 +866,8 @@ CONFIG_I2C_AMD8111=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 15c5604d0b26..5ff3de205d6a 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -844,8 +844,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index d582014b0a38..3e1272cfdd91 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -902,8 +902,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index c87b53abc617..55e5ebd91cd0 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -860,8 +860,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index 1736bbc281ec..21e0ccbd3f5c 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -852,8 +852,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 199e5f59d7a6..4f8681cc8d77 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -984,7 +984,7 @@ CONFIG_I2C_PASEMI=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index de9b121820a6..5339bb44cce9 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1232,8 +1232,8 @@ CONFIG_I2C_POWERMAC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
index 4256e2c4534b..2d72ee7a8d60 100644
--- a/arch/powerpc/configs/ppc40x_defconfig
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -745,8 +745,8 @@ CONFIG_I2C_IBM_IIC=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 034a1fbdc887..358b85f9270e 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -794,8 +794,8 @@ CONFIG_I2C_IBM_IIC=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index d4685d1c0be8..88c6295b76c1 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1261,8 +1261,8 @@ CONFIG_I2C_PASEMI=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 01f05ec5abf3..7d044dfd9236 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -1801,8 +1801,8 @@ CONFIG_I2C_STUB=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=m
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 CONFIG_PCF8575=m
 CONFIG_SENSORS_PCA9539=m
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index 6046dc0cbd82..a257da608081 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -943,8 +943,8 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 1e520ab65118..61b100849715 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1055,8 +1055,8 @@ CONFIG_I2C_ALGOBIT=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index b3f5671972a9..7eb16ab7b71b 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -795,8 +795,8 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h
index d480f39d65e6..74d0bbb7d955 100644
--- a/arch/s390/include/asm/elf.h
+++ b/arch/s390/include/asm/elf.h
@@ -172,14 +172,14 @@ extern char elf_platform[];
 #ifndef __s390x__
 #define SET_PERSONALITY(ex) set_personality(PER_LINUX)
 #else /* __s390x__ */
-#define SET_PERSONALITY(ex)                             \
-do {                                                    \
-        if (current->personality != PER_LINUX32)        \
-                set_personality(PER_LINUX);             \
-        if ((ex).e_ident[EI_CLASS] == ELFCLASS32)       \
-                set_thread_flag(TIF_31BIT);             \
-        else                                            \
-                clear_thread_flag(TIF_31BIT);           \
+#define SET_PERSONALITY(ex)                                     \
+do {                                                            \
+        if (personality(current->personality) != PER_LINUX32)   \
+                set_personality(PER_LINUX);                     \
+        if ((ex).e_ident[EI_CLASS] == ELFCLASS32)               \
+                set_thread_flag(TIF_31BIT);                     \
+        else                                                    \
+                clear_thread_flag(TIF_31BIT);                   \
 } while (0)
 #endif /* __s390x__ */
 
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 6035cd20c7a7..62c706eb0de6 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1767,3 +1767,41 @@ sys_dup3_wrapper:
 sys_epoll_create1_wrapper:
         lgfr    %r2,%r2                 # int
         jg      sys_epoll_create1       # branch to system call
+
+        .globl  sys32_readahead_wrapper
+sys32_readahead_wrapper:
+        lgfr    %r2,%r2                 # int
+        llgfr   %r3,%r3                 # u32
+        llgfr   %r4,%r4                 # u32
+        lgfr    %r5,%r5                 # s32
+        jg      sys32_readahead         # branch to system call
+
+        .globl  sys32_sendfile64_wrapper
+sys32_sendfile64_wrapper:
+        lgfr    %r2,%r2                 # int
+        lgfr    %r3,%r3                 # int
+        llgtr   %r4,%r4                 # compat_loff_t *
+        lgfr    %r5,%r5                 # s32
+        jg      sys32_sendfile64        # branch to system call
+
+        .globl  sys_tkill_wrapper
+sys_tkill_wrapper:
+        lgfr    %r2,%r2                 # pid_t
+        lgfr    %r3,%r3                 # int
+        jg      sys_tkill               # branch to system call
+
+        .globl  sys_tgkill_wrapper
+sys_tgkill_wrapper:
+        lgfr    %r2,%r2                 # pid_t
+        lgfr    %r3,%r3                 # pid_t
+        lgfr    %r4,%r4                 # int
+        jg      sys_tgkill              # branch to system call
+
+        .globl  compat_sys_keyctl_wrapper
+compat_sys_keyctl_wrapper:
+        llgfr   %r2,%r2                 # u32
+        llgfr   %r3,%r3                 # u32
+        llgfr   %r4,%r4                 # u32
+        llgfr   %r5,%r5                 # u32
+        llgfr   %r6,%r6                 # u32
+        jg      compat_sys_keyctl       # branch to system call
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 76d16e0140bb..fe5b25a988ab 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -194,7 +194,7 @@ SYSCALL(sys_chown16,sys_ni_syscall,sys32_chown16_wrapper)	/* old chown16 syscall
 SYSCALL(sys_getcwd,sys_getcwd,sys32_getcwd_wrapper)
 SYSCALL(sys_capget,sys_capget,sys32_capget_wrapper)
 SYSCALL(sys_capset,sys_capset,sys32_capset_wrapper)             /* 185 */
-SYSCALL(sys_sigaltstack,sys_sigaltstack,sys32_sigaltstack)
+SYSCALL(sys_sigaltstack,sys_sigaltstack,sys32_sigaltstack_wrapper)
 SYSCALL(sys_sendfile,sys_sendfile64,sys32_sendfile_wrapper)
 NI_SYSCALL                                                      /* streams1 */
 NI_SYSCALL                                                      /* streams2 */
@@ -230,8 +230,8 @@ SYSCALL(sys_mincore,sys_mincore,sys32_mincore_wrapper)
 SYSCALL(sys_madvise,sys_madvise,sys32_madvise_wrapper)
 SYSCALL(sys_getdents64,sys_getdents64,sys32_getdents64_wrapper) /* 220 */
 SYSCALL(sys_fcntl64,sys_ni_syscall,compat_sys_fcntl64_wrapper)
-SYSCALL(sys_readahead,sys_readahead,sys32_readahead)
-SYSCALL(sys_sendfile64,sys_ni_syscall,sys32_sendfile64)
+SYSCALL(sys_readahead,sys_readahead,sys32_readahead_wrapper)
+SYSCALL(sys_sendfile64,sys_ni_syscall,sys32_sendfile64_wrapper)
 SYSCALL(sys_setxattr,sys_setxattr,sys32_setxattr_wrapper)
 SYSCALL(sys_lsetxattr,sys_lsetxattr,sys32_lsetxattr_wrapper)    /* 225 */
 SYSCALL(sys_fsetxattr,sys_fsetxattr,sys32_fsetxattr_wrapper)
@@ -245,11 +245,11 @@ SYSCALL(sys_removexattr,sys_removexattr,sys32_removexattr_wrapper)
 SYSCALL(sys_lremovexattr,sys_lremovexattr,sys32_lremovexattr_wrapper)
 SYSCALL(sys_fremovexattr,sys_fremovexattr,sys32_fremovexattr_wrapper)   /* 235 */
 SYSCALL(sys_gettid,sys_gettid,sys_gettid)
-SYSCALL(sys_tkill,sys_tkill,sys_tkill)
+SYSCALL(sys_tkill,sys_tkill,sys_tkill_wrapper)
 SYSCALL(sys_futex,sys_futex,compat_sys_futex_wrapper)
 SYSCALL(sys_sched_setaffinity,sys_sched_setaffinity,sys32_sched_setaffinity_wrapper)
 SYSCALL(sys_sched_getaffinity,sys_sched_getaffinity,sys32_sched_getaffinity_wrapper)    /* 240 */
-SYSCALL(sys_tgkill,sys_tgkill,sys_tgkill)
+SYSCALL(sys_tgkill,sys_tgkill,sys_tgkill_wrapper)
 NI_SYSCALL                                                      /* reserved for TUX */
 SYSCALL(sys_io_setup,sys_io_setup,sys32_io_setup_wrapper)
 SYSCALL(sys_io_destroy,sys_io_destroy,sys32_io_destroy_wrapper)
@@ -288,7 +288,7 @@ SYSCALL(sys_mq_getsetattr,sys_mq_getsetattr,compat_sys_mq_getsetattr_wrapper)
 SYSCALL(sys_kexec_load,sys_kexec_load,compat_sys_kexec_load_wrapper)
 SYSCALL(sys_add_key,sys_add_key,compat_sys_add_key_wrapper)
 SYSCALL(sys_request_key,sys_request_key,compat_sys_request_key_wrapper)
-SYSCALL(sys_keyctl,sys_keyctl,compat_sys_keyctl)                /* 280 */
+SYSCALL(sys_keyctl,sys_keyctl,compat_sys_keyctl_wrapper)                /* 280 */
 SYSCALL(sys_waitid,sys_waitid,compat_sys_waitid_wrapper)
 SYSCALL(sys_ioprio_set,sys_ioprio_set,sys_ioprio_set_wrapper)
 SYSCALL(sys_ioprio_get,sys_ioprio_get,sys_ioprio_get_wrapper)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index d649600df5b9..fc468cae4460 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -399,8 +399,10 @@ static struct workqueue_struct *time_sync_wq;
 
 static void __init time_init_wq(void)
 {
-        if (!time_sync_wq)
-                time_sync_wq = create_singlethread_workqueue("timesync");
+        if (time_sync_wq)
+                return;
+        time_sync_wq = create_singlethread_workqueue("timesync");
+        stop_machine_create();
 }
 
 /*
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 2fb36e462194..ecf0304e61c1 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -516,8 +516,12 @@ EXPORT_SYMBOL(del_virt_timer);
  */
 void init_cpu_vtimer(void)
 {
+        struct thread_info *ti = current_thread_info();
         struct vtimer_queue *vq;
 
+        S390_lowcore.user_timer = ti->user_timer;
+        S390_lowcore.system_timer = ti->system_timer;
+
         /* kick the virtual timer */
         asm volatile ("STCK %0" : "=m" (S390_lowcore.last_update_clock));
         asm volatile ("STPT %0" : "=m" (S390_lowcore.last_update_timer));
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index f32a5197128d..ebabe518e729 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -644,66 +644,25 @@ endmenu
 
 menu "Bus options"
 
-# Even on SuperH devices which don't have an ISA bus,
-# this variable helps the PCMCIA modules handle
-# IRQ requesting properly -- Greg Banks.
-#
-# Though we're generally not interested in it when
-# we're not using PCMCIA, so we make it dependent on
-# PCMCIA outright. -- PFM.
-config ISA
-        def_bool y
-        depends on PCMCIA && HD6446X_SERIES
-        help
-          Find out whether you have ISA slots on your motherboard.  ISA is the
-          name of a bus system, i.e. the way the CPU talks to the other stuff
-          inside your box.  Other bus systems are PCI, EISA, MicroChannel
-          (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
-          newer boards don't support it.  If you have ISA, say Y, otherwise N.
-
-config EISA
-        bool
-        ---help---
-          The Extended Industry Standard Architecture (EISA) bus was
-          developed as an open alternative to the IBM MicroChannel bus.
-
-          The EISA bus provided some of the features of the IBM MicroChannel
-          bus while maintaining backward compatibility with cards made for
-          the older ISA bus.  The EISA bus saw limited use between 1988 and
-          1995 when it was made obsolete by the PCI bus.
-
-          Say Y here if you are building a kernel for an EISA-based machine.
-
-          Otherwise, say N.
-
-config MCA
-        bool
-        help
-          MicroChannel Architecture is found in some IBM PS/2 machines and
-          laptops.  It is a bus system similar to PCI or ISA. See
-          <file:Documentation/mca.txt> (and especially the web page given
-          there) before attempting to build an MCA bus kernel.
-
-config SBUS
-        bool
-
 config SUPERHYWAY
         tristate "SuperHyway Bus support"
         depends on CPU_SUBTYPE_SH4_202
 
 config MAPLE
-       bool "Maple Bus support"
-       depends on SH_DREAMCAST
-       help
-         The Maple Bus is SEGA's serial communication bus for peripherals
-         on the Dreamcast. Without this bus support you won't be able to
-         get your Dreamcast keyboard etc to work, so most users
-         probably want to say 'Y' here, unless you are only using the
-         Dreamcast with a serial line terminal or a remote network
-         connection.
+        bool "Maple Bus support"
+        depends on SH_DREAMCAST
+        help
+         The Maple Bus is SEGA's serial communication bus for peripherals
+         on the Dreamcast. Without this bus support you won't be able to
+         get your Dreamcast keyboard etc to work, so most users
+         probably want to say 'Y' here, unless you are only using the
+         Dreamcast with a serial line terminal or a remote network
+         connection.
 
 source "arch/sh/drivers/pci/Kconfig"
 
+source "drivers/pci/pcie/Kconfig"
+
 source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 1c67cba6e34f..caf4c33f4e84 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -18,8 +18,10 @@
 #include <linux/mtd/sh_flctl.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
-#include <linux/smc911x.h>
+#include <linux/smsc911x.h>
 #include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
 #include <media/soc_camera_platform.h>
 #include <media/sh_mobile_ceu.h>
 #include <video/sh_mobile_lcdc.h>
@@ -27,12 +29,14 @@
 #include <asm/clock.h>
 #include <cpu/sh7723.h>
 
-static struct smc911x_platdata smc911x_info = {
-        .flags = SMC911X_USE_32BIT,
-        .irq_flags = IRQF_TRIGGER_LOW,
+static struct smsc911x_platform_config smsc911x_config = {
+        .phy_interface  = PHY_INTERFACE_MODE_MII,
+        .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+        .irq_type       = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+        .flags          = SMSC911X_USE_32BIT,
 };
 
-static struct resource smc9118_resources[] = {
+static struct resource smsc9118_resources[] = {
         [0] = {
                 .start  = 0xb6080000,
                 .end    = 0xb60fffff,
@@ -45,13 +49,13 @@ static struct resource smc9118_resources[] = {
         }
 };
 
-static struct platform_device smc9118_device = {
-        .name           = "smc911x",
+static struct platform_device smsc9118_device = {
+        .name           = "smsc911x",
         .id             = -1,
-        .num_resources  = ARRAY_SIZE(smc9118_resources),
-        .resource       = smc9118_resources,
+        .num_resources  = ARRAY_SIZE(smsc9118_resources),
+        .resource       = smsc9118_resources,
         .dev            = {
-                .platform_data = &smc911x_info,
+                .platform_data = &smsc911x_config,
         },
 };
 
@@ -315,8 +319,22 @@ static struct platform_device ceu_device = {
         },
 };
 
+struct spi_gpio_platform_data sdcard_cn3_platform_data = {
+        .sck = GPIO_PTD0,
+        .mosi = GPIO_PTD1,
+        .miso = GPIO_PTD2,
+        .num_chipselect = 1,
+};
+
+static struct platform_device sdcard_cn3_device = {
+        .name           = "spi_gpio",
+        .dev    = {
+                .platform_data  = &sdcard_cn3_platform_data,
+        },
+};
+
 static struct platform_device *ap325rxa_devices[] __initdata = {
-        &smc9118_device,
+        &smsc9118_device,
         &ap325rxa_nor_flash_device,
         &lcdc_device,
         &ceu_device,
@@ -324,6 +342,7 @@ static struct platform_device *ap325rxa_devices[] __initdata = {
         &camera_device,
 #endif
         &nand_flash_device,
+        &sdcard_cn3_device,
 };
 
 static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
@@ -332,6 +351,15 @@ static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
         },
 };
 
+static struct spi_board_info ap325rxa_spi_devices[] = {
+        {
+                .modalias = "mmc_spi",
+                .max_speed_hz = 5000000,
+                .chip_select = 0,
+                .controller_data = (void *) GPIO_PTD5,
+        },
+};
+
 static int __init ap325rxa_devices_setup(void)
 {
         /* LD3 and LD4 LEDs */
@@ -429,6 +457,9 @@ static int __init ap325rxa_devices_setup(void)
         i2c_register_board_info(0, ap325rxa_i2c_devices,
                                 ARRAY_SIZE(ap325rxa_i2c_devices));
 
+        spi_register_board_info(ap325rxa_spi_devices,
+                                ARRAY_SIZE(ap325rxa_spi_devices));
+
         return platform_add_devices(ap325rxa_devices,
                                 ARRAY_SIZE(ap325rxa_devices));
 }
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index 3de22ccdeb7e..0a37c8bfc959 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/smsc911x.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
@@ -242,7 +243,7 @@ static void __init mpr2_setup(char **cmdline_p)
                 printk(KERN_WARNING "Ethernet not ready\n");
 }
 
-static struct resource smc911x_resources[] = {
+static struct resource smsc911x_resources[] = {
         [0] = {
                 .start          = 0xa8000000,
                 .end            = 0xabffffff,
@@ -255,11 +256,21 @@ static struct resource smc911x_resources[] = {
         },
 };
 
-static struct platform_device smc911x_device = {
-        .name           = "smc911x",
+static struct smsc911x_platform_config smsc911x_config = {
+        .phy_interface  = PHY_INTERFACE_MODE_MII,
+        .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+        .irq_type       = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+        .flags          = SMSC911X_USE_32BIT,
+};
+
+static struct platform_device smsc911x_device = {
+        .name           = "smsc911x",
         .id             = -1,
-        .num_resources  = ARRAY_SIZE(smc911x_resources),
-        .resource       = smc911x_resources,
+        .num_resources  = ARRAY_SIZE(smsc911x_resources),
+        .resource       = smsc911x_resources,
+        .dev = {
+                .platform_data = &smsc911x_config,
+        },
 };
 
 static struct resource heartbeat_resources[] = {
@@ -360,7 +371,7 @@ static void __init set_mtd_partitions(void)
 
 static struct platform_device *mpr2_devices[] __initdata = {
         &heartbeat_device,
-        &smc911x_device,
+        &smsc911x_device,
         &flash_device,
 };
 
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index 408bbddaf325..38a64968d7bf 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -18,6 +18,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-pca-platform.h>
 #include <linux/i2c-algo-pca.h>
+#include <linux/irq.h>
 #include <asm/heartbeat.h>
 #include <mach/sh7785lcr.h>
 
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index 806438b42cac..20fe72c515d5 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -18,6 +18,7 @@
 #include <linux/ata_platform.h>
 #include <linux/types.h>
 #include <linux/i2c.h>
+#include <linux/irq.h>
 #include <net/ax88796.h>
 #include <asm/machvec.h>
 #include <mach/highlander.h>
diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
index 48fece78ff54..746742bdc014 100644
--- a/arch/sh/boards/mach-hp6xx/setup.c
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -12,9 +12,9 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/irq.h>
 #include <asm/hd64461.h>
 #include <asm/io.h>
-#include <asm/irq.h>
 #include <mach/hp6xx.h>
 #include <cpu/dac.h>
 
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index cc1408119c24..28e56c5809a2 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -18,9 +18,12 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
-#include <media/soc_camera_platform.h>
-#include <media/sh_mobile_ceu.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
 #include <video/sh_mobile_lcdc.h>
+#include <media/sh_mobile_ceu.h>
+#include <media/ov772x.h>
+#include <media/tw9910.h>
 #include <asm/clock.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
@@ -292,9 +295,12 @@ static struct platform_device migor_lcdc_device = {
 };
 
 static struct clk *camera_clk;
+static DEFINE_MUTEX(camera_lock);
 
-static void camera_power_on(void)
+static void camera_power_on(int is_tw)
 {
+        mutex_lock(&camera_lock);
+
         /* Use 10 MHz VIO_CKO instead of 24 MHz to work
          * around signal quality issues on Panel Board V2.1.
          */
@@ -304,6 +310,12 @@ static void camera_power_on(void)
 
         /* use VIO_RST to take camera out of reset */
         mdelay(10);
+        if (is_tw) {
+                gpio_set_value(GPIO_PTT2, 0);
+                gpio_set_value(GPIO_PTT0, 0);
+        } else {
+                gpio_set_value(GPIO_PTT0, 1);
+        }
         gpio_set_value(GPIO_PTT3, 0);
         mdelay(10);
         gpio_set_value(GPIO_PTT3, 1);
@@ -316,107 +328,29 @@ static void camera_power_off(void)
         clk_put(camera_clk);
 
         gpio_set_value(GPIO_PTT3, 0);
+        mutex_unlock(&camera_lock);
 }
 
-static void camera_power(int mode)
+static int ov7725_power(struct device *dev, int mode)
 {
         if (mode)
-                camera_power_on();
+                camera_power_on(0);
         else
                 camera_power_off();
-}
 
-#ifdef CONFIG_I2C
-static unsigned char camera_ov772x_magic[] =
-{
-        0x09, 0x01, 0x0c, 0x20, 0x0d, 0x41, 0x0e, 0x01,
-        0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00,
-        0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07,
-        0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10,
-        0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0,
-        0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00,
-        0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00,
-        0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2,
-        0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80,
-        0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00,
-        0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50,
-        0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60,
-        0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a,
-        0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f,
-        0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00,
-        0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01,
-        0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f,
-        0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f,
-        0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70,
-        0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e,
-        0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69,
-        0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f,
-        0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4,
-        0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00,
-        0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f,
-        0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08,
-        0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e,
-        0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02,
-        0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06,
-        0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40,
-        0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff,
-        0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f,
-        0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50,
-        0x2c, 0x78,
-};
+        return 0;
+}
 
-static int ov772x_set_capture(struct soc_camera_platform_info *info,
-                              int enable)
+static int tw9910_power(struct device *dev, int mode)
 {
-        struct i2c_adapter *a = i2c_get_adapter(0);
-        struct i2c_msg msg;
-        int ret = 0;
-        int i;
-
-        if (!enable)
-                return 0; /* camera_power_off() is enough */
-
-        for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) {
-                u_int8_t buf[8];
-
-                msg.addr = 0x21;
-                msg.buf = buf;
-                msg.len = 2;
-                msg.flags = 0;
-
-                buf[0] = camera_ov772x_magic[i];
-                buf[1] = camera_ov772x_magic[i + 1];
-
-                ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
-        }
+        if (mode)
+                camera_power_on(1);
+        else
+                camera_power_off();
 
-        return ret;
+        return 0;
 }
 
-static struct soc_camera_platform_info ov772x_info = {
-        .iface = 0,
-        .format_name = "RGB565",
-        .format_depth = 16,
-        .format = {
-                .pixelformat = V4L2_PIX_FMT_RGB565,
-                .colorspace = V4L2_COLORSPACE_SRGB,
-                .width = 320,
-                .height = 240,
-        },
-        .bus_param =  SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
-        SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
-        .power = camera_power,
-        .set_capture = ov772x_set_capture,
-};
-
-static struct platform_device migor_camera_device = {
-        .name           = "soc_camera_platform",
-        .dev    = {
-                .platform_data  = &ov772x_info,
-        },
-};
-#endif /* CONFIG_I2C */
-
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
         .flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
         | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH,
@@ -448,16 +382,43 @@ static struct platform_device migor_ceu_device = {
         },
 };
 
+static struct ov772x_camera_info ov7725_info = {
+        .buswidth  = SOCAM_DATAWIDTH_8,
+        .link = {
+                .power  = ov7725_power,
+        },
+};
+
+static struct tw9910_video_info tw9910_info = {
+        .buswidth = SOCAM_DATAWIDTH_8,
+        .mpout    = TW9910_MPO_FIELD,
+        .link = {
+                .power  = tw9910_power,
+        }
+};
+
+struct spi_gpio_platform_data sdcard_cn9_platform_data = {
+        .sck = GPIO_PTD0,
+        .mosi = GPIO_PTD1,
+        .miso = GPIO_PTD2,
+        .num_chipselect = 1,
+};
+
+static struct platform_device sdcard_cn9_device = {
+        .name           = "spi_gpio",
+        .dev    = {
+                .platform_data  = &sdcard_cn9_platform_data,
+        },
+};
+
 static struct platform_device *migor_devices[] __initdata = {
         &smc91x_eth_device,
         &sh_keysc_device,
         &migor_lcdc_device,
         &migor_ceu_device,
-#ifdef CONFIG_I2C
-        &migor_camera_device,
-#endif
         &migor_nor_flash_device,
         &migor_nand_flash_device,
+        &sdcard_cn9_device,
 };
 
 static struct i2c_board_info migor_i2c_devices[] = {
@@ -468,6 +429,23 @@ static struct i2c_board_info migor_i2c_devices[] = {
                 I2C_BOARD_INFO("migor_ts", 0x51),
                 .irq = 38, /* IRQ6 */
         },
+        {
+                I2C_BOARD_INFO("ov772x", 0x21),
+                .platform_data = &ov7725_info,
+        },
+        {
+                I2C_BOARD_INFO("tw9910", 0x45),
+                .platform_data = &tw9910_info,
+        },
+};
+
+static struct spi_board_info migor_spi_devices[] = {
+        {
+                .modalias = "mmc_spi",
+                .max_speed_hz = 5000000,
+                .chip_select = 0,
+                .controller_data = (void *) GPIO_PTD5,
+        },
 };
 
 static int __init migor_devices_setup(void)
@@ -592,6 +570,9 @@ static int __init migor_devices_setup(void)
         i2c_register_board_info(0, migor_i2c_devices,
                                 ARRAY_SIZE(migor_i2c_devices));
 
+        spi_register_board_info(migor_spi_devices,
+                                ARRAY_SIZE(migor_spi_devices));
+
         return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
 }
 __initcall(migor_devices_setup);
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
index 73f743b9be8d..d8a65ea91665 100644
--- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
+++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -15,19 +15,21 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/map.h>
-#include <linux/smc911x.h>
+#include <linux/smsc911x.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
 #include <cpu/sh7203.h>
 
-static struct smc911x_platdata smc911x_info = {
-        .flags          = SMC911X_USE_16BIT,
-        .irq_flags      = IRQF_TRIGGER_LOW,
+static struct smsc911x_platform_config smsc911x_config = {
+        .phy_interface  = PHY_INTERFACE_MODE_MII,
+        .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+        .irq_type       = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+        .flags          = SMSC911X_USE_16BIT,
 };
 
-static struct resource smc911x_resources[] = {
+static struct resource smsc911x_resources[] = {
         [0] = {
                 .start          = 0x24000000,
                 .end            = 0x24000000 + 0x100,
@@ -40,13 +42,13 @@ static struct resource smc911x_resources[] = {
         },
 };
 
-static struct platform_device smc911x_device = {
-        .name           = "smc911x",
+static struct platform_device smsc911x_device = {
+        .name           = "smsc911x",
         .id             = -1,
-        .num_resources  = ARRAY_SIZE(smc911x_resources),
-        .resource       = smc911x_resources,
+        .num_resources  = ARRAY_SIZE(smsc911x_resources),
+        .resource       = smsc911x_resources,
         .dev            = {
-                .platform_data = &smc911x_info,
+                .platform_data = &smsc911x_config,
         },
 };
 
@@ -87,7 +89,7 @@ static struct platform_device led_device = {
 };
 
 static struct platform_device *rsk7203_devices[] __initdata = {
-        &smc911x_device,
+        &smsc911x_device,
         &led_device,
 };
 
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index a70d23b21788..a340492087fa 100644
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/smc91x.h>
+#include <linux/irq.h>
 #include <asm/ilsel.h>
 
 static struct resource heartbeat_resources[] = {
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index 874dd9726e52..5c423fa8e6b8 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Tue Oct 21 18:20:06 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 16:54:19 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -75,12 +77,10 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -90,7 +90,6 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -98,11 +97,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -119,6 +116,10 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -128,6 +129,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -192,7 +194,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -269,7 +270,6 @@ CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -293,11 +293,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -353,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -368,8 +376,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -447,6 +455,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -472,7 +482,15 @@ CONFIG_MTD_NAND_SH_FLCTL=y
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -487,7 +505,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -530,6 +550,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
@@ -541,13 +562,34 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
-CONFIG_SMC911X=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -630,6 +672,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -637,19 +680,102 @@ CONFIG_HW_RANDOM=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+# CONFIG_SPI_SH_SCI is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -658,8 +784,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -668,13 +799,47 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multimedia core support
 #
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
 # CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_MEDIA=y
 
 #
 # Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+CONFIG_SOC_CAMERA_PLATFORM=y
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_SH_MOBILE_CEU=y
+# CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
 
 #
@@ -682,7 +847,34 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -694,14 +886,103 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_SUPERH_MONO=y
+CONFIG_LOGO_SUPERH_VGA16=y
+CONFIG_LOGO_SUPERH_CLUT224=y
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
 # CONFIG_DMADEVICES is not set
 CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
@@ -768,10 +1049,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -780,6 +1058,7 @@ CONFIG_TMPFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -878,13 +1157,19 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -900,11 +1185,14 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -987,12 +1275,13 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
diff --git a/arch/sh/configs/cayman_defconfig b/arch/sh/configs/cayman_defconfig
index e21c0e8e22d9..92895013813d 100644
--- a/arch/sh/configs/cayman_defconfig
+++ b/arch/sh/configs/cayman_defconfig
@@ -700,8 +700,8 @@ CONFIG_I2C_HELPER_AUTO=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index be4c2e0dbb26..2d86e0487517 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:18:02 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 16:54:55 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -78,7 +80,6 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -90,7 +91,6 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -98,11 +98,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -119,6 +117,10 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -126,6 +128,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -195,7 +198,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -290,7 +292,6 @@ CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -310,6 +311,7 @@ CONFIG_MAPLE=y
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
@@ -322,11 +324,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -379,6 +388,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -394,8 +404,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -434,6 +444,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -477,6 +488,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -492,7 +504,6 @@ CONFIG_NET_PCI=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -506,6 +517,7 @@ CONFIG_8139TOO=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -611,6 +623,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -643,11 +656,11 @@ CONFIG_SH_WDT=y
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -657,7 +670,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -732,6 +745,7 @@ CONFIG_FB_PVR2=y
 # CONFIG_FB_SH_MOBILE_LCDC is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -788,9 +802,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -847,10 +862,7 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -901,13 +913,19 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -923,6 +941,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1006,6 +1025,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/edosk7705_defconfig b/arch/sh/configs/edosk7705_defconfig
index 8f4329fbbd39..461bfb350221 100644
--- a/arch/sh/configs/edosk7705_defconfig
+++ b/arch/sh/configs/edosk7705_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Wed Dec 17 13:53:02 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 16:55:29 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -64,7 +64,6 @@ CONFIG_SHMEM=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -72,11 +71,14 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 # CONFIG_BLOCK is not set
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -151,7 +153,6 @@ CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -362,7 +363,6 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -382,10 +382,7 @@ CONFIG_STAGING_EXCLUDE_BUILD=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_NLS is not set
 
 #
@@ -426,6 +423,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 #
 # Library routines
 #
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig
index 158006847ad6..14d4b35685a1 100644
--- a/arch/sh/configs/edosk7760_defconfig
+++ b/arch/sh/configs/edosk7760_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:20:09 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 16:55:48 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -59,6 +61,7 @@ CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -75,13 +78,11 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -92,7 +93,6 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,11 +100,9 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -121,6 +119,10 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -128,6 +130,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -191,7 +194,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -272,7 +274,6 @@ CONFIG_SCHED_HRTICK=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -298,11 +299,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -353,6 +361,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -368,8 +377,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -510,6 +519,7 @@ CONFIG_MII=y
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -592,6 +602,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -632,8 +643,8 @@ CONFIG_I2C_SH7760=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -651,11 +662,11 @@ CONFIG_I2C_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -664,9 +675,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -693,15 +707,16 @@ CONFIG_FB=m
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -716,6 +731,7 @@ CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_SH7760 is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -737,6 +753,7 @@ CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
@@ -753,6 +770,7 @@ CONFIG_SND_SOC=y
 #
 # SoC Audio support for SuperH
 #
+CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_SND_SOC_ALL_CODECS is not set
 # CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
@@ -823,10 +841,7 @@ CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -950,6 +965,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -958,17 +974,25 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
@@ -978,7 +1002,9 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -994,7 +1020,11 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1077,6 +1107,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index 1032b235f080..847a25106635 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:23:53 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 16:56:55 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,7 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_SYS_SUPPORTS_PM=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -70,12 +71,10 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -85,13 +84,11 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -108,6 +105,10 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_FREEZER=y
 
 #
@@ -115,6 +116,7 @@ CONFIG_FREEZER=y
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -178,7 +180,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -236,7 +237,6 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4
 #
 CONFIG_HD6446X_SERIES=y
 CONFIG_HD64461=y
-# CONFIG_HD64465 is not set
 CONFIG_HD64461_IRQ=36
 CONFIG_HD64461_IOBASE=0xb0000000
 CONFIG_HD64461_ENABLER=y
@@ -275,7 +275,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
-CONFIG_ISA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
@@ -286,9 +285,6 @@ CONFIG_PCMCIA_IOCTL=y
 #
 # PC-card bridges
 #
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
 
 #
 # Executable file formats
@@ -301,13 +297,13 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options (EXPERIMENTAL)
 #
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
+# CONFIG_CPU_IDLE is not set
 # CONFIG_NET is not set
 
 #
@@ -326,7 +322,6 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
@@ -336,6 +331,7 @@ CONFIG_BLK_DEV=y
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -375,18 +371,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
@@ -395,10 +380,7 @@ CONFIG_ATA=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
-# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_WINBOND_VLB is not set
 CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
 # CONFIG_PHONE is not set
@@ -438,11 +420,11 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HP600=y
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
@@ -484,11 +466,11 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
@@ -499,7 +481,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
 # CONFIG_W1 is not set
@@ -508,11 +489,11 @@ CONFIG_DEVPORT=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -522,7 +503,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -552,11 +533,12 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -571,6 +553,7 @@ CONFIG_FB_HIT=y
 CONFIG_FB_SH_MOBILE_LCDC=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_LCD_ILI9320 is not set
@@ -587,7 +570,6 @@ CONFIG_BACKLIGHT_HP680=y
 #
 # Console display driver support
 #
-# CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
@@ -701,10 +683,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -785,13 +764,19 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -807,11 +792,15 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -893,6 +882,7 @@ CONFIG_CRYPTO_MD5=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index b82dfb4da3aa..d3bbbb037716 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:25:51 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 16:58:46 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -76,7 +78,6 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -87,7 +88,6 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -95,11 +95,9 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -116,6 +114,10 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -123,6 +125,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -186,7 +189,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -285,6 +287,7 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 CONFIG_PCCARD=y
@@ -315,11 +318,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -401,6 +411,7 @@ CONFIG_ATALK=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -416,8 +427,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -462,6 +473,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -478,7 +490,6 @@ CONFIG_IDE_GD_ATA=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -508,6 +519,7 @@ CONFIG_BLK_DEV_AEC62XX=y
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -560,6 +572,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -573,6 +586,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -634,6 +649,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -649,7 +665,6 @@ CONFIG_NET_PCI=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -659,6 +674,7 @@ CONFIG_8139CP=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -687,6 +703,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -695,6 +712,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -791,6 +809,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -832,11 +851,11 @@ CONFIG_HWMON=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -846,7 +865,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -952,11 +971,9 @@ CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
@@ -964,12 +981,15 @@ CONFIG_HID_LOGITECH=m
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=m
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -990,6 +1010,8 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1007,6 +1029,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1017,11 +1041,11 @@ CONFIG_USB_PRINTER=m
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1119,6 +1143,7 @@ CONFIG_USB_SISUSBVGA_CON=y
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1192,10 +1217,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1302,14 +1324,20 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1325,6 +1353,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1408,6 +1437,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index c3ecedfc1bc7..d5c5a1dbaa62 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:29:42 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:02:46 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -76,7 +78,6 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -87,7 +88,6 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -95,11 +95,9 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -116,6 +114,10 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -123,6 +125,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -186,7 +189,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -286,6 +288,7 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 CONFIG_PCCARD=y
@@ -315,11 +318,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -399,6 +409,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -414,8 +425,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -459,6 +470,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -501,6 +513,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -514,6 +527,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -627,6 +642,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -642,7 +658,6 @@ CONFIG_NET_PCI=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -656,6 +671,7 @@ CONFIG_8139TOO_TUNE_TWISTER=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -684,6 +700,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -692,6 +709,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -787,6 +805,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -828,11 +847,11 @@ CONFIG_HWMON=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -842,7 +861,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -902,9 +921,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1007,10 +1027,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1100,14 +1117,20 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1123,6 +1146,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1206,6 +1230,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index 499ed7204385..125d8019dc2f 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:32:23 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:03:37 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -58,6 +60,7 @@ CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -74,12 +77,10 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -90,7 +91,6 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -98,11 +98,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -119,6 +117,10 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -126,6 +128,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -189,7 +192,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -296,11 +298,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -351,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -366,8 +376,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -483,6 +493,7 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -502,13 +513,33 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
-CONFIG_SMC911X=y
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -618,6 +649,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -627,17 +659,37 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -647,7 +699,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -778,10 +830,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -912,6 +961,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -920,16 +970,24 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
@@ -939,25 +997,9 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-CONFIG_SH_KGDB=y
-
-#
-# KGDB configuration options
-#
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
 # CONFIG_MORE_COMPILE_OPTIONS is not set
-# CONFIG_KGDB_NMI is not set
-CONFIG_KGDB_SYSRQ=y
-
-#
-# Serial port setup
-#
-CONFIG_KGDB_DEFPORT=0
-CONFIG_KGDB_DEFBAUD=115200
-CONFIG_KGDB_DEFPARITY_N=y
-# CONFIG_KGDB_DEFPARITY_E is not set
-# CONFIG_KGDB_DEFPARITY_O is not set
-CONFIG_KGDB_DEFBITS_8=y
-# CONFIG_KGDB_DEFBITS_7 is not set
 
 #
 # Security options
@@ -972,6 +1014,7 @@ CONFIG_KGDB_DEFBITS_8=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index b8ada8ce98d9..5a1c0485a354 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:37:41 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:06:47 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -72,12 +74,10 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -87,13 +87,11 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -110,6 +108,10 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -117,6 +119,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -186,7 +189,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -265,7 +267,6 @@ CONFIG_HZ=250
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -292,11 +293,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 CONFIG_XFRM=y
@@ -351,6 +359,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -366,8 +375,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -400,12 +409,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -445,6 +456,7 @@ CONFIG_MII=y
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -503,6 +515,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -530,11 +543,11 @@ CONFIG_HWMON=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -544,7 +557,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -588,7 +601,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -656,10 +669,7 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -761,13 +771,19 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -783,11 +799,15 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -869,6 +889,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index 30cac42f25e7..7758263514bc 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Fri Oct 31 15:58:06 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:09:35 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -77,6 +79,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -89,18 +92,15 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -117,6 +117,10 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -127,6 +131,7 @@ CONFIG_CPU_SH4A=y
 CONFIG_CPU_SH4AL_DSP=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -196,7 +201,6 @@ CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -299,11 +303,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -359,6 +370,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -375,8 +387,8 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -493,7 +505,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -536,6 +550,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
@@ -554,6 +569,7 @@ CONFIG_MII=y
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -644,6 +660,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -684,8 +701,8 @@ CONFIG_I2C_SH_MOBILE=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -697,17 +714,39 @@ CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -716,10 +755,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -762,8 +804,11 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 CONFIG_SOC_CAMERA=y
 # CONFIG_SOC_CAMERA_MT9M001 is not set
 # CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
 # CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
 CONFIG_SOC_CAMERA_PLATFORM=y
+# CONFIG_SOC_CAMERA_OV772X is not set
 CONFIG_VIDEO_SH_MOBILE_CEU=y
 # CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
@@ -806,7 +851,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -872,6 +917,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -948,10 +994,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1008,19 +1051,29 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1035,12 +1088,13 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 # CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1123,6 +1177,7 @@ CONFIG_CRYPTO_MANAGER=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 2e65149e9502..65b01a9e5934 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 20:03:46 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:10:19 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -85,6 +87,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
@@ -96,7 +99,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -104,11 +106,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -125,6 +125,10 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -133,6 +137,7 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -203,7 +208,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -284,7 +288,6 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -302,6 +305,7 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
@@ -315,11 +319,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -382,6 +393,7 @@ CONFIG_LLC=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -398,8 +410,8 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -442,8 +454,10 @@ CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -486,6 +500,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -499,6 +514,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -611,6 +628,7 @@ CONFIG_AX88796_93CX6=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -626,7 +644,6 @@ CONFIG_PCNET32=m
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -640,6 +657,7 @@ CONFIG_8139TOO_8129=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 CONFIG_VIA_RHINE=m
@@ -669,6 +687,7 @@ CONFIG_R8169=y
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -677,6 +696,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -771,6 +791,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -836,8 +857,8 @@ CONFIG_I2C_HIGHLANDER=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -861,6 +882,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
@@ -909,11 +931,11 @@ CONFIG_HWMON=y
 CONFIG_THERMAL=y
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -922,9 +944,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -982,9 +1007,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1020,6 +1046,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1106,10 +1133,7 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1228,6 +1252,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
@@ -1236,6 +1261,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1244,16 +1270,28 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
@@ -1262,7 +1300,9 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1278,11 +1318,15 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1366,6 +1410,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 043a8a509e09..8defaa5f13b9 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 16:25:30 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:14:41 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,9 +13,11 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -63,6 +65,7 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -84,6 +87,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -97,7 +101,6 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -105,11 +108,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -126,6 +127,11 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 # CONFIG_CLASSIC_RCU is not set
+# CONFIG_TREE_RCU is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_PREEMPT_RCU_TRACE=y
 # CONFIG_FREEZER is not set
 
 #
@@ -135,6 +141,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -211,7 +218,6 @@ CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -307,8 +313,6 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 
 #
@@ -326,6 +330,7 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
@@ -339,11 +344,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -406,6 +418,7 @@ CONFIG_LLC=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -423,8 +436,8 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -467,8 +480,10 @@ CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -511,6 +526,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -524,6 +540,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -636,6 +654,7 @@ CONFIG_AX88796_93CX6=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -671,6 +690,7 @@ CONFIG_R8169=y
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -679,6 +699,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -732,6 +753,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
@@ -773,6 +795,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -812,6 +835,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_HIGHLANDER=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
@@ -838,8 +862,8 @@ CONFIG_I2C_HIGHLANDER=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -851,6 +875,30 @@ CONFIG_I2C_HIGHLANDER=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -863,6 +911,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
@@ -911,11 +960,11 @@ CONFIG_HWMON=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -924,9 +973,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -954,15 +1007,16 @@ CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -1000,6 +1054,7 @@ CONFIG_FB_CFB_IMAGEBLIT=m
 CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1034,9 +1089,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1072,6 +1128,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1158,10 +1215,7 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1291,6 +1345,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
@@ -1300,16 +1355,28 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
@@ -1318,7 +1385,9 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_4KSTACKS=y
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1334,11 +1403,15 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1422,6 +1495,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
index 014c18cbf46a..64ee69eef47c 100644
--- a/arch/sh/configs/rsk7201_defconfig
+++ b/arch/sh/configs/rsk7201_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Mon Dec  8 14:48:02 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:19:04 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -77,6 +77,7 @@ CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -87,18 +88,15 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -115,6 +113,10 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -185,7 +187,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -563,7 +564,6 @@ CONFIG_RTC_DRV_SH=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -606,10 +606,7 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -658,22 +655,28 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
 
 #
 # Tracers
 #
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -688,6 +691,7 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index dcdef31cf19b..8d7a5972a86a 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Mon Dec  8 14:35:03 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:20:31 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -62,6 +62,7 @@ CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -81,6 +82,7 @@ CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -91,18 +93,15 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -119,6 +118,10 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -189,7 +192,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -313,6 +315,8 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 # CONFIG_NET_KEY is not set
@@ -361,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -376,8 +381,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -509,13 +514,33 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
-CONFIG_SMC911X=y
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -611,6 +636,26 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -685,11 +730,9 @@ CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -697,12 +740,15 @@ CONFIG_HID_LOGITECH=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -847,7 +893,6 @@ CONFIG_RTC_DRV_SH=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -890,10 +935,7 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -961,6 +1003,7 @@ CONFIG_DEBUG_OBJECTS=y
 # CONFIG_DEBUG_OBJECTS_SELFTEST is not set
 # CONFIG_DEBUG_OBJECTS_FREE is not set
 # CONFIG_DEBUG_OBJECTS_TIMERS is not set
+CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -970,6 +1013,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
@@ -978,6 +1022,7 @@ CONFIG_DEBUG_WRITECOUNT=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_SG=y
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -986,9 +1031,12 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
 
 #
 # Tracers
@@ -997,9 +1045,13 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000
@@ -1008,6 +1060,9 @@ CONFIG_DEBUG_BOOTMEM=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_IRQSTACKS is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1022,6 +1077,7 @@ CONFIG_DEBUG_STACK_USAGE=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index 7d2a9e88838b..d6680f4382c2 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:44:36 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:23:15 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -77,6 +79,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -89,18 +92,15 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -117,6 +117,10 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -124,6 +128,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -187,7 +192,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -293,6 +297,7 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
@@ -308,11 +313,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -365,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -381,8 +394,8 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -426,6 +439,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -468,6 +482,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -481,6 +496,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -593,6 +610,7 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -608,7 +626,6 @@ CONFIG_NET_PCI=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -622,6 +639,7 @@ CONFIG_8139TOO=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -650,6 +668,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -658,6 +677,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -755,6 +775,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -777,7 +798,7 @@ CONFIG_SPI_SH_SCI=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
@@ -805,11 +826,11 @@ CONFIG_HWMON=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -819,7 +840,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -852,11 +873,12 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -895,6 +917,7 @@ CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1031,11 +1054,9 @@ CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1043,12 +1064,15 @@ CONFIG_HID_LOGITECH=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1069,6 +1093,8 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 # CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1084,6 +1110,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1094,11 +1122,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1151,6 +1179,7 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1176,6 +1205,7 @@ CONFIG_RTC_INTF_DEV=y
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1254,10 +1284,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1343,19 +1370,29 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1371,6 +1408,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1454,6 +1492,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index f680d3eecdfb..3fca10e24833 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:47:39 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:26:10 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -77,6 +79,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -89,18 +92,15 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -117,6 +117,10 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -124,6 +128,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -187,7 +192,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -293,6 +297,7 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
@@ -308,11 +313,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -365,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -381,8 +394,8 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -426,6 +439,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -468,6 +482,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -481,6 +496,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -593,6 +610,7 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -608,7 +626,6 @@ CONFIG_NET_PCI=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -622,6 +639,7 @@ CONFIG_8139TOO=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -650,6 +668,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -658,6 +677,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -755,6 +775,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -777,7 +798,7 @@ CONFIG_SPI_SH_SCI=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
@@ -805,11 +826,11 @@ CONFIG_HWMON=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -819,7 +840,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -852,11 +873,12 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -895,6 +917,7 @@ CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1031,11 +1054,9 @@ CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1043,12 +1064,15 @@ CONFIG_HID_LOGITECH=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1069,6 +1093,8 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 # CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1084,6 +1110,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1094,11 +1122,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1151,6 +1179,7 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1176,6 +1205,7 @@ CONFIG_RTC_INTF_DEV=y
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1254,10 +1284,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1343,19 +1370,29 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1371,6 +1408,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1454,6 +1492,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index 543287b97a6a..5d6b06755ae7 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:53:22 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:26:40 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -59,6 +61,7 @@ CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -81,7 +84,6 @@ CONFIG_SLUB_DEBUG=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -92,7 +94,6 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,11 +101,9 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -121,6 +120,10 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -129,6 +132,7 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -199,7 +203,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -282,7 +285,6 @@ CONFIG_SCHED_HRTICK=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -300,6 +302,7 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
@@ -334,11 +337,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -434,6 +444,7 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 # CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
 
 #
 # Classification
@@ -449,6 +460,7 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -464,8 +476,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -516,6 +528,7 @@ CONFIG_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -525,7 +538,6 @@ CONFIG_IDE_GD_ATA=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -553,6 +565,7 @@ CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -619,6 +632,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -742,6 +757,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -826,6 +842,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
@@ -875,6 +892,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_PRINTER is not set
@@ -905,11 +923,11 @@ CONFIG_POWER_SUPPLY=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 CONFIG_SSB=y
 CONFIG_SSB_SPROM=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
@@ -929,7 +947,7 @@ CONFIG_SSB_DRIVER_PCICORE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -957,15 +975,16 @@ CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -1003,6 +1022,7 @@ CONFIG_FB_CFB_IMAGEBLIT=m
 CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1054,11 +1074,9 @@ CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1066,12 +1084,15 @@ CONFIG_HID_LOGITECH=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1092,6 +1113,8 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1106,6 +1129,8 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1116,11 +1141,11 @@ CONFIG_USB_PRINTER=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1176,6 +1201,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -1260,10 +1286,7 @@ CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1392,6 +1415,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1400,17 +1424,25 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
@@ -1419,7 +1451,9 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1435,7 +1469,11 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1519,6 +1557,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 25717ff26ca9..e5b55b6f002d 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:57:39 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:31:27 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -69,6 +71,7 @@ CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -84,11 +87,11 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -99,7 +102,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -107,11 +109,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -128,6 +128,11 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 # CONFIG_CLASSIC_RCU is not set
+# CONFIG_TREE_RCU is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_PREEMPT_RCU_TRACE=y
 # CONFIG_FREEZER is not set
 
 #
@@ -136,6 +141,7 @@ CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CPU_SH2=y
 CONFIG_CPU_SH2A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 CONFIG_CPU_SUBTYPE_SH7206=y
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -197,7 +203,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -281,8 +286,6 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 
 #
@@ -296,10 +299,6 @@ CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -312,11 +311,19 @@ CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -372,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -387,8 +395,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -500,6 +508,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_93CX6=y
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -526,6 +535,7 @@ CONFIG_MII=y
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -598,11 +608,11 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -612,7 +622,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -732,10 +742,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -812,6 +819,7 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -820,6 +828,7 @@ CONFIG_DEBUG_VM=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -827,20 +836,35 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_IRQSTACKS is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -856,7 +880,11 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -890,7 +918,7 @@ CONFIG_CRYPTO_ALGAPI=y
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -939,6 +967,7 @@ CONFIG_CRYPTO_LZO=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index be246f381507..390052577031 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Thu Dec  4 16:40:25 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:33:53 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -78,7 +80,6 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -88,7 +89,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -96,11 +96,9 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -117,6 +115,10 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -190,7 +192,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -280,7 +281,6 @@ CONFIG_CMDLINE="console=ttySC0,115200"
 #
 # Bus options
 #
-# CONFIG_CF_ENABLER is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -291,11 +291,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -347,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -362,8 +370,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -661,8 +669,8 @@ CONFIG_I2C_SH_MOBILE=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -693,6 +701,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
@@ -743,11 +752,13 @@ CONFIG_V4L_USB_DRIVERS=y
 # CONFIG_USB_VIDEO_CLASS is not set
 CONFIG_USB_GSPCA=m
 # CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
 # CONFIG_USB_GSPCA_CONEX is not set
 # CONFIG_USB_GSPCA_ETOMS is not set
 # CONFIG_USB_GSPCA_FINEPIX is not set
 # CONFIG_USB_GSPCA_MARS is not set
 # CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
 # CONFIG_USB_GSPCA_PAC207 is not set
 # CONFIG_USB_GSPCA_PAC7311 is not set
 # CONFIG_USB_GSPCA_SONIXB is not set
@@ -786,6 +797,7 @@ CONFIG_RADIO_ADAPTERS=y
 # CONFIG_USB_DSBR is not set
 # CONFIG_USB_SI470X is not set
 # CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
 # CONFIG_DAB is not set
 
 #
@@ -797,15 +809,16 @@ CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -881,11 +894,9 @@ CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -893,12 +904,15 @@ CONFIG_HID_LOGITECH=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 # CONFIG_THRUSTMASTER_FF is not set
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
@@ -997,7 +1011,6 @@ CONFIG_UIO=y
 # CONFIG_UIO_SMX is not set
 # CONFIG_UIO_SERCOS3 is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -1051,10 +1064,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1138,11 +1148,12 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 #
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1158,6 +1169,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1240,6 +1252,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index db9cacd7c4e7..932b0235b1de 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:03:29 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:36:46 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -61,12 +63,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
@@ -74,12 +74,10 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -96,6 +94,10 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -103,6 +105,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH2=y
 CONFIG_CPU_SUBTYPE_SH7619=y
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -164,7 +167,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -244,7 +246,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
-# CONFIG_CF_ENABLER is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
@@ -256,6 +257,12 @@ CONFIG_BINFMT_ZFLAT=y
 # CONFIG_BINFMT_SHARED_FLAT is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 # CONFIG_NET is not set
 
 #
@@ -359,6 +366,7 @@ CONFIG_BLK_DEV=y
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -439,11 +447,11 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -453,7 +461,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -506,7 +514,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -557,10 +565,7 @@ CONFIG_PROC_SYSCTL=y
 # CONFIG_SYSFS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -602,12 +607,19 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -621,6 +633,7 @@ CONFIG_HAVE_FTRACE=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
index d88190fdd7c1..8574d6eb00a3 100644
--- a/arch/sh/configs/se7705_defconfig
+++ b/arch/sh/configs/se7705_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:04:52 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:37:50 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -68,12 +70,10 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -83,17 +83,14 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -110,6 +107,10 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -117,6 +118,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -180,7 +182,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -258,7 +259,6 @@ CONFIG_HZ=250
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -272,10 +272,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
@@ -285,11 +281,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -345,6 +348,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -360,8 +364,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -465,6 +469,7 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -491,6 +496,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_STNIC=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -583,6 +589,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
@@ -609,11 +616,11 @@ CONFIG_HWMON=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -623,7 +630,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -677,7 +684,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -734,10 +741,7 @@ CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -806,13 +810,19 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -827,6 +837,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -909,6 +920,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index 869ab1737deb..e31ea84f116d 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:08:12 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:40:12 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -15,6 +15,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -55,6 +57,7 @@ CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -71,12 +74,10 @@ CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -87,18 +88,15 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -115,6 +113,10 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -122,6 +124,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -185,7 +188,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -277,10 +279,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -291,11 +289,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -376,6 +381,7 @@ CONFIG_NET_SCH_TBF=y
 CONFIG_NET_SCH_GRED=y
 CONFIG_NET_SCH_DSMARK=y
 CONFIG_NET_SCH_NETEM=y
+# CONFIG_NET_SCH_DRR is not set
 
 #
 # Classification
@@ -394,6 +400,7 @@ CONFIG_NET_CLS_FW=y
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_IND=y
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -410,8 +417,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -518,6 +525,7 @@ CONFIG_BLK_DEV=y
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -560,6 +568,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
@@ -591,6 +600,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
 CONFIG_NET_ETHERNET=y
@@ -600,6 +612,7 @@ CONFIG_MII=y
 CONFIG_SH_ETH=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -658,6 +671,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
@@ -672,11 +686,11 @@ CONFIG_HW_RANDOM=m
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -686,7 +700,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -730,7 +744,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -748,6 +762,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
@@ -809,10 +824,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -902,6 +914,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -910,16 +923,24 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
@@ -927,7 +948,9 @@ CONFIG_HAVE_FTRACE=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -943,11 +966,16 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1030,6 +1058,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
index b52be14074d8..ad1bace3ad46 100644
--- a/arch/sh/configs/se7721_defconfig
+++ b/arch/sh/configs/se7721_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:12:06 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:43:33 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -15,6 +15,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -59,6 +61,7 @@ CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -75,12 +78,10 @@ CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -91,18 +92,15 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -119,6 +117,10 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -126,6 +128,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -189,7 +192,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -280,10 +282,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2"
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -294,11 +292,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -379,6 +384,7 @@ CONFIG_NET_SCH_TBF=y
 CONFIG_NET_SCH_GRED=y
 CONFIG_NET_SCH_DSMARK=y
 CONFIG_NET_SCH_NETEM=y
+# CONFIG_NET_SCH_DRR is not set
 
 #
 # Classification
@@ -397,6 +403,7 @@ CONFIG_NET_CLS_FW=y
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_IND=y
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -413,8 +420,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -522,6 +529,7 @@ CONFIG_BLK_DEV=y
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -673,6 +681,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
@@ -686,11 +695,11 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -700,7 +709,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -750,11 +759,9 @@ CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -762,12 +769,15 @@ CONFIG_HID_LOGITECH=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -788,19 +798,21 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -811,11 +823,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -883,6 +895,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
@@ -947,10 +960,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1063,6 +1073,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1071,16 +1082,24 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
@@ -1088,7 +1107,9 @@ CONFIG_HAVE_FTRACE=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1104,11 +1125,16 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1191,6 +1217,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
index e6df51f098f0..abb189a1d314 100644
--- a/arch/sh/configs/se7722_defconfig
+++ b/arch/sh/configs/se7722_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:15:10 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:46:59 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -75,13 +77,11 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -93,7 +93,6 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -101,11 +100,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -122,6 +119,10 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -132,6 +133,7 @@ CONFIG_CPU_SH4A=y
 CONFIG_CPU_SH4AL_DSP=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -207,7 +209,6 @@ CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -287,7 +288,6 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -300,10 +300,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -314,11 +310,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -371,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -386,8 +390,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -420,6 +424,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -462,6 +467,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
@@ -485,6 +491,7 @@ CONFIG_MII=y
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -577,6 +584,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -604,11 +612,11 @@ CONFIG_HWMON=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -618,7 +626,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -672,7 +680,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -774,10 +782,7 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -831,14 +836,20 @@ CONFIG_DEBUG_FS=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -854,6 +865,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -936,6 +948,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig
index a577099c3247..ac874f63a625 100644
--- a/arch/sh/configs/se7750_defconfig
+++ b/arch/sh/configs/se7750_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:17:29 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:49:22 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -72,12 +74,10 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -88,18 +88,15 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -116,6 +113,10 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -123,6 +124,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -186,7 +188,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -278,10 +279,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
@@ -291,11 +288,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -352,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -367,8 +372,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -469,6 +474,7 @@ CONFIG_BLK_DEV=y
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -481,7 +487,6 @@ CONFIG_IDE_GD_ATA=y
 # CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -530,6 +535,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
@@ -548,6 +554,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_STNIC=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -610,6 +617,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -645,11 +653,11 @@ CONFIG_WATCHDOG=y
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_SH_WDT=y
 # CONFIG_SH_WDT_MMAP is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -659,7 +667,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -703,7 +711,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -761,10 +769,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -847,13 +852,19 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -869,6 +880,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -951,6 +963,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig
index d99a6bdf410f..f54ae056f177 100644
--- a/arch/sh/configs/se7751_defconfig
+++ b/arch/sh/configs/se7751_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:21:12 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:51:47 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -72,12 +74,10 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -88,18 +88,15 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -116,6 +113,10 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -123,6 +124,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -186,7 +188,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -280,7 +281,6 @@ CONFIG_CMDLINE="console=ttySC1,38400"
 #
 # Bus options
 #
-# CONFIG_CF_ENABLER is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
@@ -290,11 +290,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -370,6 +377,7 @@ CONFIG_IP_NF_QUEUE=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -385,8 +393,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -490,6 +498,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -516,6 +525,7 @@ CONFIG_MII=y
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -570,6 +580,7 @@ CONFIG_DEVKMEM=y
 #
 # CONFIG_SERIAL_SH_SCI is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -604,11 +615,11 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_SH_WDT is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -618,7 +629,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -662,7 +673,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -722,10 +733,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -787,13 +795,19 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -809,6 +823,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -891,6 +906,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
index ad95b80bb198..7504978e8747 100644
--- a/arch/sh/configs/se7780_defconfig
+++ b/arch/sh/configs/se7780_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:27:30 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:53:50 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -74,7 +76,6 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -84,18 +85,15 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -111,6 +109,10 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -119,6 +121,7 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -185,7 +188,6 @@ CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -274,11 +276,11 @@ CONFIG_CMDLINE="console=ttySC0.115200 root=/dev/sda1"
 #
 # Bus options
 #
-# CONFIG_CF_ENABLER is not set
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 
@@ -294,6 +296,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -349,6 +352,7 @@ CONFIG_IPV6=y
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -363,8 +367,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -533,6 +537,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -569,11 +575,13 @@ CONFIG_SATA_SIL=y
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD64X is not set
 # CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
 # CONFIG_PATA_EFAR is not set
 # CONFIG_ATA_GENERIC is not set
 # CONFIG_PATA_HPT366 is not set
@@ -585,10 +593,15 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
 # CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -627,6 +640,9 @@ CONFIG_SMSC_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -639,6 +655,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -654,7 +671,6 @@ CONFIG_NET_PCI=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -663,6 +679,7 @@ CONFIG_NET_PCI=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -754,6 +771,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
@@ -779,11 +797,11 @@ CONFIG_HWMON=y
 CONFIG_THERMAL=y
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -793,7 +811,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -821,15 +839,16 @@ CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -865,6 +884,7 @@ CONFIG_FB_CFB_IMAGEBLIT=m
 CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -912,11 +932,9 @@ CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -924,12 +942,15 @@ CONFIG_HID_LOGITECH=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -949,6 +970,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -974,11 +996,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1094,10 +1116,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
@@ -1188,13 +1207,19 @@ CONFIG_DEBUG_FS=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1210,6 +1235,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
@@ -1288,6 +1314,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index 95f0f5d5b631..04bde1e96965 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:31:54 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:56:46 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -79,6 +81,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
@@ -91,7 +94,6 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -99,11 +101,9 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -120,6 +120,10 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -127,6 +131,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -190,7 +195,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -268,7 +272,6 @@ CONFIG_HZ=250
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -284,14 +287,11 @@ CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-CONFIG_CF_AREA5=y
-# CONFIG_CF_AREA6 is not set
-CONFIG_CF_BASE_ADDR=0xb4000000
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
@@ -307,11 +307,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -369,6 +376,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -384,8 +392,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -427,6 +435,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -441,7 +450,6 @@ CONFIG_IDE_GD_ATA=y
 CONFIG_BLK_DEV_IDECD=m
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=m
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -466,6 +474,7 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -519,6 +528,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -532,6 +542,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -583,6 +595,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -598,7 +611,6 @@ CONFIG_NET_PCI=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -608,6 +620,7 @@ CONFIG_8139CP=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -636,6 +649,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -644,6 +658,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -734,6 +749,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -782,11 +798,11 @@ CONFIG_SH_WDT=m
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -796,7 +812,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -856,9 +872,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -883,6 +900,7 @@ CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -930,10 +948,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1048,21 +1063,31 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1078,11 +1103,15 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1166,6 +1195,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
index 9a768b28adcb..1b869f452ad1 100644
--- a/arch/sh/configs/sh7710voipgw_defconfig
+++ b/arch/sh/configs/sh7710voipgw_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:35:18 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:00:31 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -74,12 +76,10 @@ CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -89,7 +89,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -97,11 +96,9 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -118,6 +115,10 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -125,6 +126,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -188,7 +190,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -287,11 +288,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -378,6 +386,7 @@ CONFIG_NET_SCH_CBQ=y
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 # CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
 
 #
 # Classification
@@ -398,6 +407,7 @@ CONFIG_NET_CLS_U32=y
 # CONFIG_NET_CLS_ACT is not set
 # CONFIG_NET_CLS_IND is not set
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -413,8 +423,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -519,6 +529,7 @@ CONFIG_BLK_DEV=y
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -546,6 +557,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SH_ETH is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -638,11 +650,11 @@ CONFIG_HW_RANDOM=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -652,7 +664,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -706,7 +718,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -763,10 +775,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -828,13 +837,19 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -850,6 +865,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -932,6 +948,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
index 6a77f691fb87..ba33aca75af6 100644
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:37:12 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:02:28 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -79,11 +81,11 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -96,18 +98,15 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -124,6 +123,10 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -132,6 +135,7 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -199,7 +203,6 @@ CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -297,11 +300,19 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -357,6 +368,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -373,8 +385,8 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -529,6 +541,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
@@ -555,6 +568,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
 CONFIG_NET_ETHERNET=y
@@ -564,6 +580,7 @@ CONFIG_MII=y
 CONFIG_SH_ETH=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -655,6 +672,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -670,11 +688,11 @@ CONFIG_HW_RANDOM=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -684,7 +702,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -737,6 +755,7 @@ CONFIG_FB_BOTH_ENDIAN=y
 CONFIG_FB_SH7760=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -781,19 +800,21 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -804,11 +825,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -897,6 +918,7 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -942,10 +964,7 @@ CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1038,20 +1057,30 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1067,6 +1096,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1149,6 +1179,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
index 07e33c285b93..1d63628df6f6 100644
--- a/arch/sh/configs/sh7785lcr_defconfig
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:49:23 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:05:18 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -86,7 +88,6 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -98,7 +99,6 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -106,11 +106,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -127,6 +125,10 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -136,6 +138,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -206,7 +209,6 @@ CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -285,7 +287,6 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -302,6 +303,7 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
@@ -315,11 +317,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -380,6 +389,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -396,8 +406,8 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -757,6 +767,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -823,8 +834,8 @@ CONFIG_I2C_PCA_PLATFORM=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -842,11 +853,11 @@ CONFIG_I2C_PCA_PLATFORM=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -855,9 +866,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -889,11 +903,12 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -932,6 +947,7 @@ CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -976,11 +992,9 @@ CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -988,12 +1002,15 @@ CONFIG_HID_LOGITECH=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1014,6 +1031,8 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1031,6 +1050,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1041,11 +1062,11 @@ CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1100,6 +1121,7 @@ CONFIG_USB_TEST=m
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1135,6 +1157,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1220,10 +1243,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1353,6 +1373,7 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1361,17 +1382,25 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
@@ -1379,7 +1408,9 @@ CONFIG_HAVE_FTRACE=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1395,11 +1426,15 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1482,6 +1517,7 @@ CONFIG_CRYPTO_DES=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
index e2b38a334976..8ba10e1e08cd 100644
--- a/arch/sh/configs/shmin_defconfig
+++ b/arch/sh/configs/shmin_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:52:59 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:09:00 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -15,6 +15,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -65,12 +67,10 @@ CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -78,12 +78,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -100,6 +98,10 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -107,6 +109,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -170,7 +173,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -268,11 +270,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
@@ -327,6 +336,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -342,8 +352,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -448,6 +458,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -474,6 +485,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -532,6 +544,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -547,11 +560,11 @@ CONFIG_HW_RANDOM=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -561,7 +574,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -605,7 +618,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -660,10 +673,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -723,14 +733,20 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -745,6 +761,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -826,6 +843,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
index ae5cbe237fff..ed90a7e81099 100644
--- a/arch/sh/configs/shx3_defconfig
+++ b/arch/sh/configs/shx3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Tue Oct 21 12:16:25 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:10:57 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -18,6 +18,8 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
 CONFIG_GENERIC_LOCKBREAK=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -79,6 +81,7 @@ CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -95,11 +98,11 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -113,7 +116,6 @@ CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -121,12 +123,10 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -143,6 +143,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_CLASSIC_RCU is not set
+# CONFIG_TREE_RCU is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_PREEMPT_RCU_TRACE=y
 CONFIG_FREEZER=y
 
 #
@@ -152,6 +157,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -230,7 +236,6 @@ CONFIG_MEMORY_HOTPLUG_SPARSE=y
 CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -323,8 +328,6 @@ CONFIG_NR_CPUS=4
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_RCU_TRACE=y
 
 #
 # Boot options
@@ -347,11 +350,19 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 CONFIG_XFRM=y
@@ -424,6 +435,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -479,7 +491,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -522,6 +536,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
@@ -546,6 +561,7 @@ CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_ENC28J60 is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -613,6 +629,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -653,8 +670,8 @@ CONFIG_I2C_HELPER_AUTO=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -678,7 +695,7 @@ CONFIG_SPI_MASTER=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
@@ -699,11 +716,11 @@ CONFIG_WATCHDOG=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -715,6 +732,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -763,15 +781,17 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_HWA_HCD is not set
 # CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
@@ -783,11 +803,11 @@ CONFIG_USB_R8A66597_HCD=m
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -890,12 +910,14 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -981,10 +1003,7 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1049,6 +1068,7 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -1057,6 +1077,7 @@ CONFIG_DEBUG_VM=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
@@ -1066,16 +1087,28 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
@@ -1083,7 +1116,9 @@ CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1099,6 +1134,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1181,6 +1217,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig
index b4ca5110958f..98377e502650 100644
--- a/arch/sh/configs/snapgear_defconfig
+++ b/arch/sh/configs/snapgear_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:55:03 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:14:08 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -76,7 +78,6 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -86,13 +87,11 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -109,6 +108,10 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -116,6 +119,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -179,7 +183,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -282,6 +285,7 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 
@@ -292,11 +296,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 # CONFIG_NET_KEY is not set
@@ -342,6 +353,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -357,8 +369,8 @@ CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -515,6 +527,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -530,7 +543,6 @@ CONFIG_NET_PCI=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -544,6 +556,7 @@ CONFIG_8139TOO_PIO=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -624,6 +637,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -641,11 +655,11 @@ CONFIG_DEVPORT=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -655,7 +669,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -689,6 +703,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -746,10 +761,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -801,13 +813,19 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -822,6 +840,7 @@ CONFIG_HAVE_FTRACE=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig
index 1711f0f70d72..72703bf57afa 100644
--- a/arch/sh/configs/systemh_defconfig
+++ b/arch/sh/configs/systemh_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:56:48 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:15:56 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -68,12 +70,10 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -84,7 +84,6 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -92,11 +91,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -113,6 +110,10 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -120,6 +121,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -183,7 +185,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -264,7 +265,6 @@ CONFIG_HZ=250
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -288,6 +288,12 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 # CONFIG_NET is not set
 
 #
@@ -314,6 +320,7 @@ CONFIG_BLK_DEV_RAM_SIZE=1024
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -360,6 +367,7 @@ CONFIG_DEVKMEM=y
 #
 # CONFIG_SERIAL_SH_SCI is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -387,11 +395,11 @@ CONFIG_HWMON=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -401,7 +409,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -444,7 +452,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -501,10 +509,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -546,13 +551,19 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -567,6 +578,7 @@ CONFIG_HAVE_FTRACE=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
index ea3c5e838fc3..01fc1defb33b 100644
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:58:12 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:17:19 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -79,7 +81,6 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -90,7 +91,6 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -98,11 +98,9 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -119,6 +117,10 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -126,6 +128,7 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -189,7 +192,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -293,6 +295,7 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
@@ -309,11 +312,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -507,6 +517,7 @@ CONFIG_NET_SCH_TBF=m
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
 CONFIG_NET_SCH_INGRESS=m
 
 #
@@ -543,6 +554,7 @@ CONFIG_NET_ACT_PEDIT=m
 # CONFIG_NET_ACT_SKBEDIT is not set
 CONFIG_NET_CLS_IND=y
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -560,12 +572,8 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -695,6 +703,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -738,6 +747,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -751,6 +761,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -807,6 +819,9 @@ CONFIG_CICADA_PHY=m
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
@@ -818,6 +833,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -833,7 +849,6 @@ CONFIG_NET_PCI=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -847,6 +862,7 @@ CONFIG_8139_OLD_RX_RESET=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -875,6 +891,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -883,6 +900,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -1002,6 +1020,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -1055,11 +1074,11 @@ CONFIG_SH_WDT=m
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1069,7 +1088,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -1145,6 +1164,8 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1162,6 +1183,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1172,11 +1195,11 @@ CONFIG_USB_PRINTER=m
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1273,6 +1296,7 @@ CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1379,10 +1403,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1530,6 +1551,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1537,16 +1559,24 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
@@ -1554,7 +1584,9 @@ CONFIG_HAVE_FTRACE=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1570,11 +1602,16 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1659,6 +1696,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig
index 9afff67d9ff2..27f968a959f8 100644
--- a/arch/sh/configs/ul2_defconfig
+++ b/arch/sh/configs/ul2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 17:35:17 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:22:53 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -80,7 +82,6 @@ CONFIG_SLUB_DEBUG=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -92,7 +93,6 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,11 +100,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -121,6 +119,10 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -131,6 +133,7 @@ CONFIG_CPU_SH4A=y
 CONFIG_CPU_SH4AL_DSP=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -206,7 +209,6 @@ CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -283,7 +285,6 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -307,11 +308,18 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -367,6 +375,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -380,10 +389,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_NL80211=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
 CONFIG_MAC80211=y
 
 #
@@ -397,11 +408,6 @@ CONFIG_MAC80211_RC_DEFAULT="pid"
 # CONFIG_MAC80211_MESH is not set
 # CONFIG_MAC80211_LEDS is not set
 # CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-CONFIG_IEEE80211_DEBUG=y
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -510,6 +516,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -552,6 +559,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
@@ -575,6 +583,7 @@ CONFIG_MII=y
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -714,11 +723,11 @@ CONFIG_HWMON=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -728,6 +737,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -785,7 +795,6 @@ CONFIG_USB_MON=y
 #
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
 # CONFIG_SUPERH_ON_CHIP_R8A66597 is not set
@@ -800,11 +809,11 @@ CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -937,10 +946,7 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1046,13 +1052,19 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1068,11 +1080,15 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1155,6 +1171,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/include/asm/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h
index 0a3d2f54ab27..2172732c55c8 100644
--- a/arch/sh/include/asm/posix_types_32.h
+++ b/arch/sh/include/asm/posix_types_32.h
@@ -39,14 +39,10 @@ typedef long long	__kernel_loff_t;
 #endif
 
 typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
         int     val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-        int     __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
 } __kernel_fsid_t;
 
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
 
 #undef  __FD_SET
 static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
@@ -117,6 +113,6 @@ static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
         }
 }
 
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
 
 #endif /* __ASM_SH_POSIX_TYPES_H */
diff --git a/arch/sh/include/asm/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h
index 0620317a6f0f..f83e9bd463d8 100644
--- a/arch/sh/include/asm/posix_types_64.h
+++ b/arch/sh/include/asm/posix_types_64.h
@@ -48,14 +48,10 @@ typedef long long	__kernel_loff_t;
 #endif
 
 typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
         int     val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-        int     __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
 } __kernel_fsid_t;
 
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
 
 #undef  __FD_SET
 static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
@@ -126,6 +122,6 @@ static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
         }
 }
 
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
 
 #endif /* __ASM_SH64_POSIX_TYPES_H */
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index 0623e377f488..4ff4dc64520c 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -112,6 +112,34 @@ static struct platform_device veu_device = {
         .num_resources  = ARRAY_SIZE(veu_resources),
 };
 
+static struct uio_info jpu_platform_data = {
+        .name = "JPU",
+        .version = "0",
+        .irq = 27,
+};
+
+static struct resource jpu_resources[] = {
+        [0] = {
+                .name   = "JPU",
+                .start  = 0xfea00000,
+                .end    = 0xfea102d3,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device jpu_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 2,
+        .dev = {
+                .platform_data  = &jpu_platform_data,
+        },
+        .resource       = jpu_resources,
+        .num_resources  = ARRAY_SIZE(jpu_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
         {
                 .mapbase        = 0xffe00000,
@@ -152,6 +180,7 @@ static struct platform_device *sh7343_devices[] __initdata = {
         &sci_device,
         &vpu_device,
         &veu_device,
+        &jpu_device,
 };
 
 static int __init sh7343_devices_setup(void)
@@ -160,9 +189,11 @@ static int __init sh7343_devices_setup(void)
         clk_always_enable("xymem0"); /* XYMEM */
         clk_always_enable("veu0"); /* VEU */
         clk_always_enable("vpu0"); /* VPU */
+        clk_always_enable("jpu0"); /* JPU */
 
         platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
         platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+        platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
 
         return platform_add_devices(sh7343_devices,
                                     ARRAY_SIZE(sh7343_devices));
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 50cf6838ec41..5146afc156e0 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -158,7 +158,7 @@ static struct resource jpu_resources[] = {
         [0] = {
                 .name   = "JPU",
                 .start  = 0xfea00000,
-                .end    = 0xfea102d0,
+                .end    = 0xfea102d3,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index a7e5f2e74bac..c90c7e5e5fee 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -520,7 +520,6 @@ asmlinkage int sys_execve(char *ufilename, char **uargv,
         int error;
         char *filename;
 
-        lock_kernel();
         filename = getname((char __user *)ufilename);
         error = PTR_ERR(filename);
         if (IS_ERR(filename))
@@ -537,7 +536,6 @@ asmlinkage int sys_execve(char *ufilename, char **uargv,
         }
         putname(filename);
 out:
-        unlock_kernel();
         return error;
 }
 
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index c0aa3d83ec0e..60dcf87ed019 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -125,20 +125,18 @@ static inline void die_if_kernel(const char *str, struct pt_regs *regs,
  * - userspace errors just cause EFAULT to be returned, resulting in SEGV
  * - kernel/userspace interfaces cause a jump to an appropriate handler
  * - other kernel errors are bad
- * - return 0 if fixed-up, -EFAULT if non-fatal (to the kernel) fault
  */
-static int die_if_no_fixup(const char * str, struct pt_regs * regs, long err)
+static void die_if_no_fixup(const char * str, struct pt_regs * regs, long err)
 {
         if (!user_mode(regs)) {
                 const struct exception_table_entry *fixup;
                 fixup = search_exception_tables(regs->pc);
                 if (fixup) {
                         regs->pc = fixup->fixup;
-                        return 0;
+                        return;
                 }
                 die(str, regs, err);
         }
-        return -EFAULT;
 }
 
 static inline void sign_extend(unsigned int count, unsigned char *dst)
@@ -314,7 +312,8 @@ static int handle_unaligned_ins(opcode_t instruction, struct pt_regs *regs,
         /* Argh. Address not only misaligned but also non-existent.
          * Raise an EFAULT and see if it's trapped
          */
-        return die_if_no_fixup("Fault in unaligned fixup", regs, 0);
+        die_if_no_fixup("Fault in unaligned fixup", regs, 0);
+        return -EFAULT;
 }
 
 /*
diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c
index 6e0be24d26e2..31e1bb5effbe 100644
--- a/arch/sh/mm/ioremap_64.c
+++ b/arch/sh/mm/ioremap_64.c
@@ -71,9 +71,9 @@ void *__ioremap(unsigned long phys_addr, unsigned long size,
          * Ok, go for it..
          */
         area = get_vm_area(size, VM_IOREMAP);
-        pr_debug("Get vm_area returns %p addr %p\n",area,area->addr);
         if (!area)
                 return NULL;
+        pr_debug("Get vm_area returns %p addr %p\n", area, area->addr);
         area->phys_addr = phys_addr;
         addr = area->addr;
         if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size,
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index de58c02633b4..c3ea215334f6 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -36,6 +36,7 @@ config SPARC64
         select HAVE_KRETPROBES
         select HAVE_KPROBES
         select HAVE_LMB
+        select HAVE_SYSCALL_WRAPPERS
         select USE_GENERIC_SMP_HELPERS if SMP
         select RTC_DRV_CMOS
         select RTC_DRV_BQ4802
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index cde19ae78f5a..ade49941def2 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -867,8 +867,8 @@ CONFIG_I2C_ALGOBIT=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c
index 05f1c916db06..f3b5466c389c 100644
--- a/arch/sparc/kernel/central.c
+++ b/arch/sparc/kernel/central.c
@@ -103,6 +103,7 @@ static int __devinit clock_board_probe(struct of_device *op,
         p->leds_resource.name = "leds";
 
         p->leds_pdev.name = "sunfire-clockboard-leds";
+        p->leds_pdev.id = -1;
         p->leds_pdev.resource = &p->leds_resource;
         p->leds_pdev.num_resources = 1;
         p->leds_pdev.dev.parent = &op->dev;
@@ -197,6 +198,7 @@ static int __devinit fhc_probe(struct of_device *op,
                 p->leds_resource.name = "leds";
 
                 p->leds_pdev.name = "sunfire-fhc-leds";
+                p->leds_pdev.id = p->board_num;
                 p->leds_pdev.resource = &p->leds_resource;
                 p->leds_pdev.num_resources = 1;
                 p->leds_pdev.dev.parent = &op->dev;
diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c
index f0b825505da5..32d32b4824f5 100644
--- a/arch/sparc/kernel/cpu.c
+++ b/arch/sparc/kernel/cpu.c
@@ -239,14 +239,26 @@ unsigned int fsr_storage;
 
 static void set_cpu_and_fpu(int psr_impl, int psr_vers, int fpu_vers)
 {
+        const struct manufacturer_info *manuf;
+        int i;
+
         sparc_cpu_type = NULL;
         sparc_fpu_type = NULL;
-        if (psr_impl < ARRAY_SIZE(manufacturer_info))
+        manuf = NULL;
+
+        for (i = 0; i < ARRAY_SIZE(manufacturer_info); i++)
+        {
+                if (psr_impl == manufacturer_info[i].psr_impl) {
+                        manuf = &manufacturer_info[i];
+                        break;
+                }
+        }
+        if (manuf != NULL)
         {
                 const struct cpu_info *cpu;
                 const struct fpu_info *fpu;
 
-                cpu = &manufacturer_info[psr_impl].cpu_info[0];
+                cpu = &manuf->cpu_info[0];
                 while (cpu->psr_vers != -1)
                 {
                         if (cpu->psr_vers == psr_vers) {
@@ -256,7 +268,7 @@ static void set_cpu_and_fpu(int psr_impl, int psr_vers, int fpu_vers)
                         }
                         cpu++;
                 }
-                fpu =  &manufacturer_info[psr_impl].fpu_info[0];
+                fpu =  &manuf->fpu_info[0];
                 while (fpu->fp_vers != -1)
                 {
                         if (fpu->fp_vers == fpu_vers) {
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index 09058fc39e73..e2d102447a43 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -399,7 +399,7 @@ void arch_pick_mmap_layout(struct mm_struct *mm)
         }
 }
 
-asmlinkage unsigned long sparc_brk(unsigned long brk)
+SYSCALL_DEFINE1(sparc_brk, unsigned long, brk)
 {
         /* People could try to be nasty and use ta 0x6d in 32bit programs */
         if (test_thread_flag(TIF_32BIT) && brk >= STACK_TOP32)
@@ -415,7 +415,7 @@ asmlinkage unsigned long sparc_brk(unsigned long brk)
  * sys_pipe() is the normal C calling standard for creating
  * a pipe. It's not the way unix traditionally does this, though.
  */
-asmlinkage long sparc_pipe(struct pt_regs *regs)
+SYSCALL_DEFINE1(sparc_pipe_real, struct pt_regs *, regs)
 {
         int fd[2];
         int error;
@@ -435,8 +435,8 @@ out:
  * This is really horribly ugly.
  */
 
-asmlinkage long sys_ipc(unsigned int call, int first, unsigned long second,
-                        unsigned long third, void __user *ptr, long fifth)
+SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, unsigned long, second,
+                unsigned long, third, void __user *, ptr, long, fifth)
 {
         long err;
 
@@ -519,7 +519,7 @@ out:
         return err;
 }
 
-asmlinkage long sparc64_newuname(struct new_utsname __user *name)
+SYSCALL_DEFINE1(sparc64_newuname, struct new_utsname __user *, name)
 {
         int ret = sys_newuname(name);
         
@@ -530,7 +530,7 @@ asmlinkage long sparc64_newuname(struct new_utsname __user *name)
         return ret;
 }
 
-asmlinkage long sparc64_personality(unsigned long personality)
+SYSCALL_DEFINE1(sparc64_personality, unsigned long, personality)
 {
         int ret;
 
@@ -564,9 +564,9 @@ int sparc_mmap_check(unsigned long addr, unsigned long len)
 }
 
 /* Linux version of mmap */
-asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
-        unsigned long prot, unsigned long flags, unsigned long fd,
-        unsigned long off)
+SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
+                unsigned long, prot, unsigned long, flags, unsigned long, fd,
+                unsigned long, off)
 {
         struct file * file = NULL;
         unsigned long retval = -EBADF;
@@ -589,7 +589,7 @@ out:
         return retval;
 }
 
-asmlinkage long sys64_munmap(unsigned long addr, size_t len)
+SYSCALL_DEFINE2(64_munmap, unsigned long, addr, size_t, len)
 {
         long ret;
 
@@ -606,9 +606,9 @@ extern unsigned long do_mremap(unsigned long addr,
         unsigned long old_len, unsigned long new_len,
         unsigned long flags, unsigned long new_addr);
                 
-asmlinkage unsigned long sys64_mremap(unsigned long addr,
-        unsigned long old_len, unsigned long new_len,
-        unsigned long flags, unsigned long new_addr)
+SYSCALL_DEFINE5(64_mremap, unsigned long, addr, unsigned long, old_len,
+                unsigned long, new_len, unsigned long, flags,
+                unsigned long, new_addr)
 {
         unsigned long ret = -EINVAL;
 
@@ -671,7 +671,7 @@ asmlinkage void sparc_breakpoint(struct pt_regs *regs)
 
 extern void check_pending(int signum);
 
-asmlinkage long sys_getdomainname(char __user *name, int len)
+SYSCALL_DEFINE2(getdomainname, char __user *, name, int, len)
 {
         int nlen, err;
 
@@ -694,11 +694,10 @@ out:
         return err;
 }
 
-asmlinkage long sys_utrap_install(utrap_entry_t type,
-                                  utrap_handler_t new_p,
-                                  utrap_handler_t new_d,
-                                  utrap_handler_t __user *old_p,
-                                  utrap_handler_t __user *old_d)
+SYSCALL_DEFINE5(utrap_install, utrap_entry_t, type,
+                utrap_handler_t, new_p, utrap_handler_t, new_d,
+                utrap_handler_t __user *, old_p,
+                utrap_handler_t __user *, old_d)
 {
         if (type < UT_INSTRUCTION_EXCEPTION || type > UT_TRAP_INSTRUCTION_31)
                 return -EINVAL;
@@ -764,11 +763,9 @@ asmlinkage long sparc_memory_ordering(unsigned long model,
         return 0;
 }
 
-asmlinkage long sys_rt_sigaction(int sig,
-                                 const struct sigaction __user *act,
-                                 struct sigaction __user *oact,
-                                 void __user *restorer,
-                                 size_t sigsetsize)
+SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
+                struct sigaction __user *, oact, void __user *, restorer,
+                size_t, sigsetsize)
 {
         struct k_sigaction new_ka, old_ka;
         int ret;
@@ -808,7 +805,8 @@ asmlinkage void update_perfctrs(void)
         reset_pic();
 }
 
-asmlinkage long sys_perfctr(int opcode, unsigned long arg0, unsigned long arg1, unsigned long arg2)
+SYSCALL_DEFINE4(perfctr, int, opcode, unsigned long, arg0,
+                unsigned long, arg1, unsigned long, arg2)
 {
         int err = 0;
 
diff --git a/arch/sparc/kernel/syscalls.S b/arch/sparc/kernel/syscalls.S
index 87f5a3b8a253..d150c2aa98d2 100644
--- a/arch/sparc/kernel/syscalls.S
+++ b/arch/sparc/kernel/syscalls.S
@@ -21,7 +21,7 @@ execve_merge:
 
         .align  32
 sys_sparc_pipe:
-        ba,pt   %xcc, sparc_pipe
+        ba,pt   %xcc, sys_sparc_pipe_real
          add    %sp, PTREGS_OFF, %o0
 sys_nis_syscall:
         ba,pt   %xcc, c_sys_nis_syscall
diff --git a/arch/sparc/kernel/systbls.h b/arch/sparc/kernel/systbls.h
index bc9f5dac4069..15c2d752b2bc 100644
--- a/arch/sparc/kernel/systbls.h
+++ b/arch/sparc/kernel/systbls.h
@@ -16,9 +16,6 @@ extern asmlinkage long sys_ipc(unsigned int call, int first,
                                void __user *ptr, long fifth);
 extern asmlinkage long sparc64_newuname(struct new_utsname __user *name);
 extern asmlinkage long sparc64_personality(unsigned long personality);
-extern asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
-                                         unsigned long prot, unsigned long flags,
-                                         unsigned long fd, unsigned long off);
 extern asmlinkage long sys64_munmap(unsigned long addr, size_t len);
 extern asmlinkage unsigned long sys64_mremap(unsigned long addr,
                                              unsigned long old_len,
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index e6007bb37046..f93c42a2b522 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -21,7 +21,7 @@ sys_call_table32:
 /*0*/   .word sys_restart_syscall, sys32_exit, sys_fork, sys_read, sys_write
 /*5*/   .word sys32_open, sys_close, sys32_wait4, sys32_creat, sys_link
 /*10*/  .word sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys32_mknod
-/*15*/  .word sys_chmod, sys_lchown16, sparc_brk, sys32_perfctr, sys32_lseek
+/*15*/  .word sys_chmod, sys_lchown16, sys_sparc_brk, sys32_perfctr, sys32_lseek
 /*20*/  .word sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16
 /*25*/  .word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys_pause
 /*30*/  .word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice
@@ -55,8 +55,8 @@ sys_call_table32:
 /*170*/ .word sys32_lsetxattr, sys32_fsetxattr, sys_getxattr, sys_lgetxattr, compat_sys_getdents
         .word sys_setsid, sys_fchdir, sys32_fgetxattr, sys_listxattr, sys_llistxattr
 /*180*/ .word sys32_flistxattr, sys_removexattr, sys_lremovexattr, compat_sys_sigpending, sys_ni_syscall
-        .word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sparc64_newuname
-/*190*/ .word sys32_init_module, sparc64_personality, sys_remap_file_pages, sys32_epoll_create, sys32_epoll_ctl
+        .word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sys_sparc64_newuname
+/*190*/ .word sys32_init_module, sys_sparc64_personality, sys_remap_file_pages, sys32_epoll_create, sys32_epoll_ctl
         .word sys32_epoll_wait, sys32_ioprio_set, sys_getppid, sys32_sigaction, sys_sgetmask
 /*200*/ .word sys32_ssetmask, sys_sigsuspend, compat_sys_newlstat, sys_uselib, compat_sys_old_readdir
         .word sys32_readahead, sys32_socketcall, sys32_syslog, sys32_lookup_dcookie, sys32_fadvise64
@@ -95,7 +95,7 @@ sys_call_table:
 /*0*/   .word sys_restart_syscall, sparc_exit, sys_fork, sys_read, sys_write
 /*5*/   .word sys_open, sys_close, sys_wait4, sys_creat, sys_link
 /*10*/  .word sys_unlink, sys_nis_syscall, sys_chdir, sys_chown, sys_mknod
-/*15*/  .word sys_chmod, sys_lchown, sparc_brk, sys_perfctr, sys_lseek
+/*15*/  .word sys_chmod, sys_lchown, sys_sparc_brk, sys_perfctr, sys_lseek
 /*20*/  .word sys_getpid, sys_capget, sys_capset, sys_setuid, sys_getuid
 /*25*/  .word sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall
 /*30*/  .word sys_utime, sys_nis_syscall, sys_nis_syscall, sys_access, sys_nice
@@ -106,7 +106,7 @@ sys_call_table:
         .word sys_reboot, sys_nis_syscall, sys_symlink, sys_readlink, sys_execve
 /*60*/  .word sys_umask, sys_chroot, sys_newfstat, sys_fstat64, sys_getpagesize
         .word sys_msync, sys_vfork, sys_pread64, sys_pwrite64, sys_nis_syscall
-/*70*/  .word sys_nis_syscall, sys_mmap, sys_nis_syscall, sys64_munmap, sys_mprotect
+/*70*/  .word sys_nis_syscall, sys_mmap, sys_nis_syscall, sys_64_munmap, sys_mprotect
         .word sys_madvise, sys_vhangup, sys_nis_syscall, sys_mincore, sys_getgroups
 /*80*/  .word sys_setgroups, sys_getpgrp, sys_nis_syscall, sys_setitimer, sys_nis_syscall
         .word sys_swapon, sys_getitimer, sys_nis_syscall, sys_sethostname, sys_nis_syscall
@@ -129,8 +129,8 @@ sys_call_table:
 /*170*/ .word sys_lsetxattr, sys_fsetxattr, sys_getxattr, sys_lgetxattr, sys_getdents
         .word sys_setsid, sys_fchdir, sys_fgetxattr, sys_listxattr, sys_llistxattr
 /*180*/ .word sys_flistxattr, sys_removexattr, sys_lremovexattr, sys_nis_syscall, sys_ni_syscall
-        .word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sparc64_newuname
-/*190*/ .word sys_init_module, sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl
+        .word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_sparc64_newuname
+/*190*/ .word sys_init_module, sys_sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl
         .word sys_epoll_wait, sys_ioprio_set, sys_getppid, sys_nis_syscall, sys_sgetmask
 /*200*/ .word sys_ssetmask, sys_nis_syscall, sys_newlstat, sys_uselib, sys_nis_syscall
         .word sys_readahead, sys_socketcall, sys_syslog, sys_lookup_dcookie, sys_fadvise64
@@ -142,7 +142,7 @@ sys_call_table:
         .word sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys_mlockall
 /*240*/ .word sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler
         .word sys_sched_yield, sys_sched_get_priority_max, sys_sched_get_priority_min, sys_sched_rr_get_interval, sys_nanosleep
-/*250*/ .word sys64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl
+/*250*/ .word sys_64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl
         .word sys_sync_file_range, sys_clock_settime, sys_clock_gettime, sys_clock_getres, sys_clock_nanosleep
 /*260*/ .word sys_sched_getaffinity, sys_sched_setaffinity, sys_timer_settime, sys_timer_gettime, sys_timer_getoverrun
         .word sys_timer_delete, sys_timer_create, sys_ni_syscall, sys_io_setup, sys_io_destroy
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index c2d153d46586..d809c4ebb48f 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -1,6 +1,6 @@
 /* arch/sparc64/kernel/traps.c
  *
- * Copyright (C) 1995,1997,2008 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1995,1997,2008,2009 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1997,1999,2000 Jakub Jelinek (jakub@redhat.com)
  */
 
@@ -314,6 +314,21 @@ void sun4v_data_access_exception(struct pt_regs *regs, unsigned long addr, unsig
                 return;
 
         if (regs->tstate & TSTATE_PRIV) {
+                /* Test if this comes from uaccess places. */
+                const struct exception_table_entry *entry;
+
+                entry = search_exception_tables(regs->tpc);
+                if (entry) {
+                        /* Ouch, somebody is trying VM hole tricks on us... */
+#ifdef DEBUG_EXCEPTIONS
+                        printk("Exception: PC<%016lx> faddr<UNKNOWN>\n", regs->tpc);
+                        printk("EX_TABLE: insn<%016lx> fixup<%016lx>\n",
+                               regs->tpc, entry->fixup);
+#endif
+                        regs->tpc = entry->fixup;
+                        regs->tnpc = regs->tpc + 4;
+                        return;
+                }
                 printk("sun4v_data_access_exception: ADDR[%016lx] "
                        "CTX[%04x] TYPE[%04x], going.\n",
                        addr, ctx, type);
diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile
index 273fc85269fc..e75faf0e59ae 100644
--- a/arch/sparc/lib/Makefile
+++ b/arch/sparc/lib/Makefile
@@ -18,7 +18,7 @@ lib-$(CONFIG_SPARC32) += lshrdi3.o ashldi3.o
 lib-y                 += rwsem_$(BITS).o
 lib-$(CONFIG_SPARC32) += muldi3.o bitext.o cmpdi2.o
 
-lib-$(CONFIG_SPARC64) += PeeCeeI.o copy_page.o clear_page.o bzero.o
+lib-$(CONFIG_SPARC64) += copy_page.o clear_page.o bzero.o
 lib-$(CONFIG_SPARC64) += csum_copy.o csum_copy_from_user.o csum_copy_to_user.o
 lib-$(CONFIG_SPARC64) += VISsave.o
 lib-$(CONFIG_SPARC64) += bitops.o
@@ -43,3 +43,4 @@ lib-$(CONFIG_SPARC64) += mcount.o ipcsum.o xor.o
 obj-y                 += iomap.o
 obj-$(CONFIG_SPARC32) += atomic32.o
 obj-y                 += ksyms.o
+obj-$(CONFIG_SPARC64) += PeeCeeI.o
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index b30a08ed8eb4..edba00d98ac3 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1331,8 +1331,8 @@ CONFIG_I2C_I801=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 0e7dbc0a3e46..322dd2748fc9 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1311,8 +1311,8 @@ CONFIG_I2C_I801=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
index e02a359d2aa5..02b47a603fc8 100644
--- a/arch/x86/include/asm/bitops.h
+++ b/arch/x86/include/asm/bitops.h
@@ -3,6 +3,9 @@
 
 /*
  * Copyright 1992, Linus Torvalds.
+ *
+ * Note: inlines with more than a single statement should be marked
+ * __always_inline to avoid problems with older gcc's inlining heuristics.
  */
 
 #ifndef _LINUX_BITOPS_H
@@ -53,7 +56,8 @@
  * Note that @nr may be almost arbitrarily large; this function is not
  * restricted to acting on a single-word quantity.
  */
-static inline void set_bit(unsigned int nr, volatile unsigned long *addr)
+static __always_inline void
+set_bit(unsigned int nr, volatile unsigned long *addr)
 {
         if (IS_IMMEDIATE(nr)) {
                 asm volatile(LOCK_PREFIX "orb %1,%0"
@@ -90,7 +94,8 @@ static inline void __set_bit(int nr, volatile unsigned long *addr)
  * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
  * in order to ensure changes are visible on other processors.
  */
-static inline void clear_bit(int nr, volatile unsigned long *addr)
+static __always_inline void
+clear_bit(int nr, volatile unsigned long *addr)
 {
         if (IS_IMMEDIATE(nr)) {
                 asm volatile(LOCK_PREFIX "andb %1,%0"
@@ -204,7 +209,8 @@ static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
  *
  * This is the same as test_and_set_bit on x86.
  */
-static inline int test_and_set_bit_lock(int nr, volatile unsigned long *addr)
+static __always_inline int
+test_and_set_bit_lock(int nr, volatile unsigned long *addr)
 {
         return test_and_set_bit(nr, addr);
 }
@@ -300,7 +306,7 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
         return oldbit;
 }
 
-static inline int constant_test_bit(unsigned int nr, const volatile unsigned long *addr)
+static __always_inline int constant_test_bit(unsigned int nr, const volatile unsigned long *addr)
 {
         return ((1UL << (nr % BITS_PER_LONG)) &
                 (((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0;
diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index 05cfed4485fa..1dbbdf4be9b4 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -99,7 +99,6 @@ extern void __iomem *ioremap_wc(unsigned long offset, unsigned long size);
  * A boot-time mapping is currently limited to at most 16 pages.
  */
 extern void early_ioremap_init(void);
-extern void early_ioremap_clear(void);
 extern void early_ioremap_reset(void);
 extern void __iomem *early_ioremap(unsigned long offset, unsigned long size);
 extern void __iomem *early_memremap(unsigned long offset, unsigned long size);
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index cb58643947b9..358acc59ae04 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -202,6 +202,35 @@
 #define MSR_IA32_THERM_STATUS           0x0000019c
 #define MSR_IA32_MISC_ENABLE            0x000001a0
 
+/* MISC_ENABLE bits: architectural */
+#define MSR_IA32_MISC_ENABLE_FAST_STRING        (1ULL << 0)
+#define MSR_IA32_MISC_ENABLE_TCC                (1ULL << 1)
+#define MSR_IA32_MISC_ENABLE_EMON               (1ULL << 7)
+#define MSR_IA32_MISC_ENABLE_BTS_UNAVAIL        (1ULL << 11)
+#define MSR_IA32_MISC_ENABLE_PEBS_UNAVAIL       (1ULL << 12)
+#define MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP (1ULL << 16)
+#define MSR_IA32_MISC_ENABLE_MWAIT              (1ULL << 18)
+#define MSR_IA32_MISC_ENABLE_LIMIT_CPUID        (1ULL << 22)
+#define MSR_IA32_MISC_ENABLE_XTPR_DISABLE       (1ULL << 23)
+#define MSR_IA32_MISC_ENABLE_XD_DISABLE         (1ULL << 34)
+
+/* MISC_ENABLE bits: model-specific, meaning may vary from core to core */
+#define MSR_IA32_MISC_ENABLE_X87_COMPAT         (1ULL << 2)
+#define MSR_IA32_MISC_ENABLE_TM1                (1ULL << 3)
+#define MSR_IA32_MISC_ENABLE_SPLIT_LOCK_DISABLE (1ULL << 4)
+#define MSR_IA32_MISC_ENABLE_L3CACHE_DISABLE    (1ULL << 6)
+#define MSR_IA32_MISC_ENABLE_SUPPRESS_LOCK      (1ULL << 8)
+#define MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE   (1ULL << 9)
+#define MSR_IA32_MISC_ENABLE_FERR               (1ULL << 10)
+#define MSR_IA32_MISC_ENABLE_FERR_MULTIPLEX     (1ULL << 10)
+#define MSR_IA32_MISC_ENABLE_TM2                (1ULL << 13)
+#define MSR_IA32_MISC_ENABLE_ADJ_PREF_DISABLE   (1ULL << 19)
+#define MSR_IA32_MISC_ENABLE_SPEEDSTEP_LOCK     (1ULL << 20)
+#define MSR_IA32_MISC_ENABLE_L1D_CONTEXT        (1ULL << 24)
+#define MSR_IA32_MISC_ENABLE_DCU_PREF_DISABLE   (1ULL << 37)
+#define MSR_IA32_MISC_ENABLE_TURBO_DISABLE      (1ULL << 38)
+#define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE    (1ULL << 39)
+
 /* Intel Model 6 */
 #define MSR_P6_EVNTSEL0                 0x00000186
 #define MSR_P6_EVNTSEL1                 0x00000187
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
index cb7c151a8bff..dd14c54ac718 100644
--- a/arch/x86/include/asm/pgalloc.h
+++ b/arch/x86/include/asm/pgalloc.h
@@ -42,6 +42,7 @@ static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
 
 static inline void pte_free(struct mm_struct *mm, struct page *pte)
 {
+        pgtable_page_dtor(pte);
         __free_page(pte);
 }
 
diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h
index 9c6797c3e56c..c0b0bda754ee 100644
--- a/arch/x86/include/asm/syscalls.h
+++ b/arch/x86/include/asm/syscalls.h
@@ -40,7 +40,7 @@ asmlinkage int sys_sigaction(int, const struct old_sigaction __user *,
                              struct old_sigaction __user *);
 asmlinkage int sys_sigaltstack(unsigned long);
 asmlinkage unsigned long sys_sigreturn(unsigned long);
-asmlinkage int sys_rt_sigreturn(struct pt_regs);
+asmlinkage int sys_rt_sigreturn(unsigned long);
 
 /* kernel/ioport.c */
 asmlinkage long sys_iopl(unsigned long);
diff --git a/arch/x86/include/asm/timex.h b/arch/x86/include/asm/timex.h
index 1287dc1347d6..b5c9d45c981f 100644
--- a/arch/x86/include/asm/timex.h
+++ b/arch/x86/include/asm/timex.h
@@ -1,18 +1,13 @@
-/* x86 architecture timex specifications */
 #ifndef _ASM_X86_TIMEX_H
 #define _ASM_X86_TIMEX_H
 
 #include <asm/processor.h>
 #include <asm/tsc.h>
 
-#ifdef CONFIG_X86_ELAN
-#  define PIT_TICK_RATE 1189200 /* AMD Elan has different frequency! */
-#elif defined(CONFIG_X86_RDC321X)
-#  define PIT_TICK_RATE 1041667 /* Underlying HZ for R8610 */
-#else
-#  define PIT_TICK_RATE 1193182 /* Underlying HZ */
-#endif
-#define CLOCK_TICK_RATE PIT_TICK_RATE
+/* The PIT ticks at this frequency (in HZ): */
+#define PIT_TICK_RATE           1193182
+
+#define CLOCK_TICK_RATE         PIT_TICK_RATE
 
 #define ARCH_HAS_READ_CURRENT_TIMER
 
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 0f830e4f5675..4b6df2469fe3 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -895,6 +895,10 @@ void disable_local_APIC(void)
 {
         unsigned int value;
 
+        /* APIC hasn't been mapped yet */
+        if (!apic_phys)
+                return;
+
         clear_local_APIC();
 
         /*
@@ -1833,6 +1837,11 @@ void __cpuinit generic_processor_info(int apicid, int version)
         num_processors++;
         cpu = cpumask_next_zero(-1, cpu_present_mask);
 
+        if (version != apic_version[boot_cpu_physical_apicid])
+                WARN_ONCE(1,
+                        "ACPI: apic version mismatch, bootcpu: %x cpu %d: %x\n",
+                        apic_version[boot_cpu_physical_apicid], cpu, version);
+
         physid_set(apicid, phys_cpu_present_map);
         if (apicid == boot_cpu_physical_apicid) {
                 /*
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 6f11e029e8c5..4b1c319d30c3 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -145,13 +145,14 @@ typedef union {
 
 struct drv_cmd {
         unsigned int type;
-        cpumask_var_t mask;
+        const struct cpumask *mask;
         drv_addr_union addr;
         u32 val;
 };
 
-static void do_drv_read(struct drv_cmd *cmd)
+static long do_drv_read(void *_cmd)
 {
+        struct drv_cmd *cmd = _cmd;
         u32 h;
 
         switch (cmd->type) {
@@ -166,10 +167,12 @@ static void do_drv_read(struct drv_cmd *cmd)
         default:
                 break;
         }
+        return 0;
 }
 
-static void do_drv_write(struct drv_cmd *cmd)
+static long do_drv_write(void *_cmd)
 {
+        struct drv_cmd *cmd = _cmd;
         u32 lo, hi;
 
         switch (cmd->type) {
@@ -186,30 +189,23 @@ static void do_drv_write(struct drv_cmd *cmd)
         default:
                 break;
         }
+        return 0;
 }
 
 static void drv_read(struct drv_cmd *cmd)
 {
-        cpumask_t saved_mask = current->cpus_allowed;
         cmd->val = 0;
 
-        set_cpus_allowed_ptr(current, cmd->mask);
-        do_drv_read(cmd);
-        set_cpus_allowed_ptr(current, &saved_mask);
+        work_on_cpu(cpumask_any(cmd->mask), do_drv_read, cmd);
 }
 
 static void drv_write(struct drv_cmd *cmd)
 {
-        cpumask_t saved_mask = current->cpus_allowed;
         unsigned int i;
 
         for_each_cpu(i, cmd->mask) {
-                set_cpus_allowed_ptr(current, cpumask_of(i));
-                do_drv_write(cmd);
+                work_on_cpu(i, do_drv_write, cmd);
         }
-
-        set_cpus_allowed_ptr(current, &saved_mask);
-        return;
 }
 
 static u32 get_cur_val(const struct cpumask *mask)
@@ -235,8 +231,7 @@ static u32 get_cur_val(const struct cpumask *mask)
                 return 0;
         }
 
-        cpumask_copy(cmd.mask, mask);
-
+        cmd.mask = mask;
         drv_read(&cmd);
 
         dprintk("get_cur_val = %u\n", cmd.val);
@@ -368,7 +363,7 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
         return freq;
 }
 
-static unsigned int check_freqs(const cpumask_t *mask, unsigned int freq,
+static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq,
                                 struct acpi_cpufreq_data *data)
 {
         unsigned int cur_freq;
@@ -403,9 +398,6 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
                 return -ENODEV;
         }
 
-        if (unlikely(!alloc_cpumask_var(&cmd.mask, GFP_KERNEL)))
-                return -ENOMEM;
-
         perf = data->acpi_data;
         result = cpufreq_frequency_table_target(policy,
                                                 data->freq_table,
@@ -450,9 +442,9 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 
         /* cpufreq holds the hotplug lock, so we are safe from here on */
         if (policy->shared_type != CPUFREQ_SHARED_TYPE_ANY)
-                cpumask_and(cmd.mask, cpu_online_mask, policy->cpus);
+                cmd.mask = policy->cpus;
         else
-                cpumask_copy(cmd.mask, cpumask_of(policy->cpu));
+                cmd.mask = cpumask_of(policy->cpu);
 
         freqs.old = perf->states[perf->state].core_frequency * 1000;
         freqs.new = data->freq_table[next_state].frequency;
@@ -479,7 +471,6 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
         perf->state = next_perf_state;
 
 out:
-        free_cpumask_var(cmd.mask);
         return result;
 }
 
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 8ea6929e974c..549f2ada55f5 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -29,6 +29,19 @@
 
 static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 {
+        /* Unmask CPUID levels if masked: */
+        if (c->x86 == 6 && c->x86_model >= 15) {
+                u64 misc_enable;
+
+                rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
+
+                if (misc_enable & MSR_IA32_MISC_ENABLE_LIMIT_CPUID) {
+                        misc_enable &= ~MSR_IA32_MISC_ENABLE_LIMIT_CPUID;
+                        wrmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
+                        c->cpuid_level = cpuid_eax(0);
+                }
+        }
+
         if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
                 (c->x86 == 0x6 && c->x86_model >= 0x0e))
                 set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index b59ddcc88cd8..0c0a455fe95c 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -33,11 +33,13 @@ u64 mtrr_tom2;
 struct mtrr_state_type mtrr_state = {};
 EXPORT_SYMBOL_GPL(mtrr_state);
 
-#undef MODULE_PARAM_PREFIX
-#define MODULE_PARAM_PREFIX "mtrr."
-
-static int mtrr_show;
-module_param_named(show, mtrr_show, bool, 0);
+static int __initdata mtrr_show;
+static int __init mtrr_debug(char *opt)
+{
+        mtrr_show = 1;
+        return 0;
+}
+early_param("mtrr.show", mtrr_debug);
 
 /*
  * Returns the effective MTRR type for the region
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index cd759ad90690..64d5ad0b8add 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -628,11 +628,12 @@ static int hpet_cpuhp_notify(struct notifier_block *n,
 
         switch (action & 0xf) {
         case CPU_ONLINE:
-                INIT_DELAYED_WORK(&work.work, hpet_work);
+                INIT_DELAYED_WORK_ON_STACK(&work.work, hpet_work);
                 init_completion(&work.complete);
                 /* FIXME: add schedule_work_on() */
                 schedule_delayed_work_on(cpu, &work.work, 0);
                 wait_for_completion(&work.complete);
+                destroy_timer_on_stack(&work.work.timer);
                 break;
         case CPU_DEAD:
                 if (hdev) {
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 55c46074eba0..01161077a49c 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -136,7 +136,7 @@ static void __init setup_cpu_pda_map(void)
 #ifdef CONFIG_X86_64
 
 /* correctly size the local cpu masks */
-static void setup_cpu_local_masks(void)
+static void __init setup_cpu_local_masks(void)
 {
         alloc_bootmem_cpumask_var(&cpu_initialized_mask);
         alloc_bootmem_cpumask_var(&cpu_callin_mask);
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 89bb7668041d..df0587f24c54 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -632,9 +632,16 @@ badframe:
 }
 
 #ifdef CONFIG_X86_32
-asmlinkage int sys_rt_sigreturn(struct pt_regs regs)
+/*
+ * Note: do not pass in pt_regs directly as with tail-call optimization
+ * GCC will incorrectly stomp on the caller's frame and corrupt user-space
+ * register state:
+ */
+asmlinkage int sys_rt_sigreturn(unsigned long __unused)
 {
-        return do_rt_sigreturn(&regs);
+        struct pt_regs *regs = (struct pt_regs *)&__unused;
+
+        return do_rt_sigreturn(regs);
 }
 #else /* !CONFIG_X86_32 */
 asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index f885023167e0..6812b829ed83 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -200,6 +200,7 @@ static int uv_wait_completion(struct bau_desc *bau_desc,
                                 destination_timeouts = 0;
                         }
                 }
+                cpu_relax();
         }
         return FLUSH_COMPLETE;
 }
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 23206ba16874..1d3302cc2ddf 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -858,7 +858,7 @@ void __init vmi_init(void)
 #endif
 }
 
-void vmi_activate(void)
+void __init vmi_activate(void)
 {
         unsigned long flags;
 
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index 4a20b2f9a381..7c8ca91bb9ec 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -56,7 +56,7 @@ do {									   \
                 "       jmp 2b\n"                                          \
                 ".previous\n"                                              \
                 _ASM_EXTABLE(0b,3b)                                        \
-                : "=d"(res), "=c"(count), "=&a" (__d0), "=&S" (__d1),      \
+                : "=&d"(res), "=&c"(count), "=&a" (__d0), "=&S" (__d1),    \
                   "=&D" (__d2)                                             \
                 : "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \
                 : "memory");                                               \
@@ -218,7 +218,7 @@ long strnlen_user(const char __user *s, long n)
                 "       .align 4\n"
                 "       .long 0b,2b\n"
                 ".previous"
-                :"=r" (n), "=D" (s), "=a" (res), "=c" (tmp)
+                :"=&r" (n), "=&D" (s), "=&a" (res), "=&c" (tmp)
                 :"0" (n), "1" (s), "2" (0), "3" (mask)
                 :"cc");
         return res & mask;
diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c
index 64d6c84e6353..ec13cb5f17ed 100644
--- a/arch/x86/lib/usercopy_64.c
+++ b/arch/x86/lib/usercopy_64.c
@@ -32,7 +32,7 @@ do {									   \
                 "       jmp 2b\n"                                          \
                 ".previous\n"                                              \
                 _ASM_EXTABLE(0b,3b)                                        \
-                : "=r"(res), "=c"(count), "=&a" (__d0), "=&S" (__d1),      \
+                : "=&r"(res), "=&c"(count), "=&a" (__d0), "=&S" (__d1),    \
                   "=&D" (__d2)                                             \
                 : "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \
                 : "memory");                                               \
@@ -86,7 +86,7 @@ unsigned long __clear_user(void __user *addr, unsigned long size)
                 ".previous\n"
                 _ASM_EXTABLE(0b,3b)
                 _ASM_EXTABLE(1b,2b)
-                : [size8] "=c"(size), [dst] "=&D" (__d0)
+                : [size8] "=&c"(size), [dst] "=&D" (__d0)
                 : [size1] "r"(size & 7), "[size8]" (size / 8), "[dst]"(addr),
                   [zero] "r" (0UL), [eight] "r" (8UL));
         return size;
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 88f1b10de3be..2cef05074413 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -138,6 +138,47 @@ static pte_t * __init one_page_table_init(pmd_t *pmd)
         return pte_offset_kernel(pmd, 0);
 }
 
+static pte_t *__init page_table_kmap_check(pte_t *pte, pmd_t *pmd,
+                                           unsigned long vaddr, pte_t *lastpte)
+{
+#ifdef CONFIG_HIGHMEM
+        /*
+         * Something (early fixmap) may already have put a pte
+         * page here, which causes the page table allocation
+         * to become nonlinear. Attempt to fix it, and if it
+         * is still nonlinear then we have to bug.
+         */
+        int pmd_idx_kmap_begin = fix_to_virt(FIX_KMAP_END) >> PMD_SHIFT;
+        int pmd_idx_kmap_end = fix_to_virt(FIX_KMAP_BEGIN) >> PMD_SHIFT;
+
+        if (pmd_idx_kmap_begin != pmd_idx_kmap_end
+            && (vaddr >> PMD_SHIFT) >= pmd_idx_kmap_begin
+            && (vaddr >> PMD_SHIFT) <= pmd_idx_kmap_end
+            && ((__pa(pte) >> PAGE_SHIFT) < table_start
+                || (__pa(pte) >> PAGE_SHIFT) >= table_end)) {
+                pte_t *newpte;
+                int i;
+
+                BUG_ON(after_init_bootmem);
+                newpte = alloc_low_page();
+                for (i = 0; i < PTRS_PER_PTE; i++)
+                        set_pte(newpte + i, pte[i]);
+
+                paravirt_alloc_pte(&init_mm, __pa(newpte) >> PAGE_SHIFT);
+                set_pmd(pmd, __pmd(__pa(newpte)|_PAGE_TABLE));
+                BUG_ON(newpte != pte_offset_kernel(pmd, 0));
+                __flush_tlb_all();
+
+                paravirt_release_pte(__pa(pte) >> PAGE_SHIFT);
+                pte = newpte;
+        }
+        BUG_ON(vaddr < fix_to_virt(FIX_KMAP_BEGIN - 1)
+               && vaddr > fix_to_virt(FIX_KMAP_END)
+               && lastpte && lastpte + PTRS_PER_PTE != pte);
+#endif
+        return pte;
+}
+
 /*
  * This function initializes a certain range of kernel virtual memory
  * with new bootmem page tables, everywhere page tables are missing in
@@ -154,6 +195,7 @@ page_table_range_init(unsigned long start, unsigned long end, pgd_t *pgd_base)
         unsigned long vaddr;
         pgd_t *pgd;
         pmd_t *pmd;
+        pte_t *pte = NULL;
 
         vaddr = start;
         pgd_idx = pgd_index(vaddr);
@@ -165,7 +207,8 @@ page_table_range_init(unsigned long start, unsigned long end, pgd_t *pgd_base)
                 pmd = pmd + pmd_index(vaddr);
                 for (; (pmd_idx < PTRS_PER_PMD) && (vaddr != end);
                                                         pmd++, pmd_idx++) {
-                        one_page_table_init(pmd);
+                        pte = page_table_kmap_check(one_page_table_init(pmd),
+                                                    pmd, vaddr, pte);
 
                         vaddr += PMD_SIZE;
                 }
@@ -508,7 +551,6 @@ static void __init early_ioremap_page_table_range_init(pgd_t *pgd_base)
          * Fixed mappings, only the page table structure has to be
          * created - mappings will be set by set_fixmap():
          */
-        early_ioremap_clear();
         vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
         end = (FIXADDR_TOP + PMD_SIZE - 1) & PMD_MASK;
         page_table_range_init(vaddr, end, pgd_base);
@@ -801,7 +843,7 @@ static void __init find_early_table_space(unsigned long end, int use_pse)
         tables += PAGE_ALIGN(ptes * sizeof(pte_t));
 
         /* for fixmap */
-        tables += PAGE_SIZE * 2;
+        tables += PAGE_ALIGN(__end_of_fixed_addresses * sizeof(pte_t));
 
         /*
          * RED-PEN putting page tables only on node 0 could
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 23f68e77ad1f..e6d36b490250 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -596,7 +596,7 @@ static void __init init_gbpages(void)
                 direct_gbpages = 0;
 }
 
-static unsigned long __init kernel_physical_mapping_init(unsigned long start,
+static unsigned long __meminit kernel_physical_mapping_init(unsigned long start,
                                                 unsigned long end,
                                                 unsigned long page_size_mask)
 {
diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c
index d0151d8ce452..ca53224fc56c 100644
--- a/arch/x86/mm/iomap_32.c
+++ b/arch/x86/mm/iomap_32.c
@@ -17,6 +17,7 @@
  */
 
 #include <asm/iomap.h>
+#include <asm/pat.h>
 #include <linux/module.h>
 
 /* Map 'pfn' using fixed map 'type' and protections 'prot'
@@ -29,6 +30,15 @@ iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot)
 
         pagefault_disable();
 
+        /*
+         * For non-PAT systems, promote PAGE_KERNEL_WC to PAGE_KERNEL_UC_MINUS.
+         * PAGE_KERNEL_WC maps to PWT, which translates to uncached if the
+         * MTRR is UC or WC.  UC_MINUS gets the real intention, of the
+         * user, which is "WC if the MTRR is WC, UC if you can't do that."
+         */
+        if (!pat_enabled && pgprot_val(prot) == pgprot_val(PAGE_KERNEL_WC))
+                prot = PAGE_KERNEL_UC_MINUS;
+
         idx = type + KM_TYPE_NR*smp_processor_id();
         vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
         set_pte(kmap_pte-idx, pfn_pte(pfn, prot));
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index bd85d42819e1..af750ab973b6 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -557,34 +557,9 @@ void __init early_ioremap_init(void)
         }
 }
 
-void __init early_ioremap_clear(void)
-{
-        pmd_t *pmd;
-
-        if (early_ioremap_debug)
-                printk(KERN_INFO "early_ioremap_clear()\n");
-
-        pmd = early_ioremap_pmd(fix_to_virt(FIX_BTMAP_BEGIN));
-        pmd_clear(pmd);
-        paravirt_release_pte(__pa(bm_pte) >> PAGE_SHIFT);
-        __flush_tlb_all();
-}
-
 void __init early_ioremap_reset(void)
 {
-        enum fixed_addresses idx;
-        unsigned long addr, phys;
-        pte_t *pte;
-
         after_paging_init = 1;
-        for (idx = FIX_BTMAP_BEGIN; idx >= FIX_BTMAP_END; idx--) {
-                addr = fix_to_virt(idx);
-                pte = early_ioremap_pte(addr);
-                if (pte_present(*pte)) {
-                        phys = pte_val(*pte) & PAGE_MASK;
-                        set_fixmap(idx, phys);
-                }
-        }
 }
 
 static void __init __early_set_fixmap(enum fixed_addresses idx,
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index e89d24815f26..84ba74820ad6 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -534,6 +534,36 @@ out_unlock:
         return 0;
 }
 
+static int __cpa_process_fault(struct cpa_data *cpa, unsigned long vaddr,
+                               int primary)
+{
+        /*
+         * Ignore all non primary paths.
+         */
+        if (!primary)
+                return 0;
+
+        /*
+         * Ignore the NULL PTE for kernel identity mapping, as it is expected
+         * to have holes.
+         * Also set numpages to '1' indicating that we processed cpa req for
+         * one virtual address page and its pfn. TBD: numpages can be set based
+         * on the initial value and the level returned by lookup_address().
+         */
+        if (within(vaddr, PAGE_OFFSET,
+                   PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT))) {
+                cpa->numpages = 1;
+                cpa->pfn = __pa(vaddr) >> PAGE_SHIFT;
+                return 0;
+        } else {
+                WARN(1, KERN_WARNING "CPA: called for zero pte. "
+                        "vaddr = %lx cpa->vaddr = %lx\n", vaddr,
+                        *cpa->vaddr);
+
+                return -EFAULT;
+        }
+}
+
 static int __change_page_attr(struct cpa_data *cpa, int primary)
 {
         unsigned long address;
@@ -549,17 +579,11 @@ static int __change_page_attr(struct cpa_data *cpa, int primary)
 repeat:
         kpte = lookup_address(address, &level);
         if (!kpte)
-                return 0;
+                return __cpa_process_fault(cpa, address, primary);
 
         old_pte = *kpte;
-        if (!pte_val(old_pte)) {
-                if (!primary)
-                        return 0;
-                WARN(1, KERN_WARNING "CPA: called for zero pte. "
-                       "vaddr = %lx cpa->vaddr = %lx\n", address,
-                       *cpa->vaddr);
-                return -EINVAL;
-        }
+        if (!pte_val(old_pte))
+                return __cpa_process_fault(cpa, address, primary);
 
         if (level == PG_LEVEL_4K) {
                 pte_t new_pte;
@@ -657,12 +681,7 @@ static int cpa_process_alias(struct cpa_data *cpa)
                 vaddr = *cpa->vaddr;
 
         if (!(within(vaddr, PAGE_OFFSET,
-                    PAGE_OFFSET + (max_low_pfn_mapped << PAGE_SHIFT))
-#ifdef CONFIG_X86_64
-                || within(vaddr, PAGE_OFFSET + (1UL<<32),
-                    PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT))
-#endif
-        )) {
+                    PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT)))) {
 
                 alias_cpa = *cpa;
                 temp_cpa_vaddr = (unsigned long) __va(cpa->pfn << PAGE_SHIFT);
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 8b08fb955274..7b61036427df 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -333,11 +333,23 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
                                               req_type & _PAGE_CACHE_MASK);
         }
 
-        is_range_ram = pagerange_is_ram(start, end);
-        if (is_range_ram == 1)
-                return reserve_ram_pages_type(start, end, req_type, new_type);
-        else if (is_range_ram < 0)
-                return -EINVAL;
+        if (new_type)
+                *new_type = actual_type;
+
+        /*
+         * For legacy reasons, some parts of the physical address range in the
+         * legacy 1MB region is treated as non-RAM (even when listed as RAM in
+         * the e820 tables).  So we will track the memory attributes of this
+         * legacy 1MB region using the linear memtype_list always.
+         */
+        if (end >= ISA_END_ADDRESS) {
+                is_range_ram = pagerange_is_ram(start, end);
+                if (is_range_ram == 1)
+                        return reserve_ram_pages_type(start, end, req_type,
+                                                      new_type);
+                else if (is_range_ram < 0)
+                        return -EINVAL;
+        }
 
         new  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
         if (!new)
@@ -347,9 +359,6 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
         new->end        = end;
         new->type       = actual_type;
 
-        if (new_type)
-                *new_type = actual_type;
-
         spin_lock(&memtype_lock);
 
         if (cached_entry && start >= cached_start)
@@ -437,11 +446,19 @@ int free_memtype(u64 start, u64 end)
         if (is_ISA_range(start, end - 1))
                 return 0;
 
-        is_range_ram = pagerange_is_ram(start, end);
-        if (is_range_ram == 1)
-                return free_ram_pages_type(start, end);
-        else if (is_range_ram < 0)
-                return -EINVAL;
+        /*
+         * For legacy reasons, some parts of the physical address range in the
+         * legacy 1MB region is treated as non-RAM (even when listed as RAM in
+         * the e820 tables).  So we will track the memory attributes of this
+         * legacy 1MB region using the linear memtype_list always.
+         */
+        if (end >= ISA_END_ADDRESS) {
+                is_range_ram = pagerange_is_ram(start, end);
+                if (is_range_ram == 1)
+                        return free_ram_pages_type(start, end);
+                else if (is_range_ram < 0)
+                        return -EINVAL;
+        }
 
         spin_lock(&memtype_lock);
         list_for_each_entry(entry, &memtype_list, nd) {
diff --git a/arch/x86/scripts/strip-symbols b/arch/x86/scripts/strip-symbols
deleted file mode 100644
index a2f1ccb827c7..000000000000
--- a/arch/x86/scripts/strip-symbols
+++ /dev/null
@@ -1 +0,0 @@
-__cpu_vendor_dev_X86_VENDOR_*
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 8079afca4972..55e530942ab0 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -777,10 +777,16 @@ static void device_remove_class_symlinks(struct device *dev)
 int dev_set_name(struct device *dev, const char *fmt, ...)
 {
         va_list vargs;
+        char *s;
 
         va_start(vargs, fmt);
         vsnprintf(dev->bus_id, sizeof(dev->bus_id), fmt, vargs);
         va_end(vargs);
+
+        /* ewww... some of these buggers have / in the name... */
+        while ((s = strchr(dev->bus_id, '/')))
+                *s = '!';
+
         return 0;
 }
 EXPORT_SYMBOL_GPL(dev_set_name);
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index d4e7dca06e4f..ba68a4671cb5 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -102,7 +102,7 @@ static int __init omap_rng_probe(struct platform_device *pdev)
                 return -EBUSY;
 
         if (cpu_is_omap24xx()) {
-                rng_ick = clk_get(NULL, "rng_ick");
+                rng_ick = clk_get(&pdev->dev, "rng_ick");
                 if (IS_ERR(rng_ick)) {
                         dev_err(&pdev->dev, "Could not get rng_ick\n");
                         ret = PTR_ERR(rng_ick);
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index e34b06420816..48ea59e79672 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -62,6 +62,25 @@ config MV_XOR
         ---help---
           Enable support for the Marvell XOR engine.
 
+config MX3_IPU
+        bool "MX3x Image Processing Unit support"
+        depends on ARCH_MX3
+        select DMA_ENGINE
+        default y
+        help
+          If you plan to use the Image Processing unit in the i.MX3x, say
+          Y here. If unsure, select Y.
+
+config MX3_IPU_IRQS
+        int "Number of dynamically mapped interrupts for IPU"
+        depends on MX3_IPU
+        range 2 137
+        default 4
+        help
+          Out of 137 interrupt sources on i.MX31 IPU only very few are used.
+          To avoid bloating the irq_desc[] array we allocate a sufficient
+          number of IRQ slots and map them dynamically to specific sources.
+
 config DMA_ENGINE
         bool
 
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 14f59527d4f6..2e5dc96700d2 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
 obj-$(CONFIG_FSL_DMA) += fsldma.o
 obj-$(CONFIG_MV_XOR) += mv_xor.o
 obj-$(CONFIG_DW_DMAC) += dw_dmac.o
+obj-$(CONFIG_MX3_IPU) += ipu/
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 403dbe781122..a58993011edb 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -329,9 +329,6 @@ struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type)
         struct dma_chan *chan;
         int cpu;
 
-        WARN_ONCE(dmaengine_ref_count == 0,
-                  "client called %s without a reference", __func__);
-
         cpu = get_cpu();
         chan = per_cpu_ptr(channel_table[tx_type], cpu)->chan;
         put_cpu();
@@ -348,9 +345,6 @@ void dma_issue_pending_all(void)
         struct dma_device *device;
         struct dma_chan *chan;
 
-        WARN_ONCE(dmaengine_ref_count == 0,
-                  "client called %s without a reference", __func__);
-
         rcu_read_lock();
         list_for_each_entry_rcu(device, &dma_device_list, global_node) {
                 if (dma_has_cap(DMA_PRIVATE, device->cap_mask))
@@ -961,6 +955,8 @@ void dma_run_dependencies(struct dma_async_tx_descriptor *tx)
         if (!dep)
                 return;
 
+        /* we'll submit tx->next now, so clear the link */
+        tx->next = NULL;
         chan = dep->chan;
 
         /* keep submitting up until a channel switch is detected
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 3603f1ea5b28..732fa1ec36ab 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -217,6 +217,10 @@ static int dmatest_func(void *data)
         chan = thread->chan;
 
         while (!kthread_should_stop()) {
+                struct dma_device *dev = chan->device;
+                struct dma_async_tx_descriptor *tx;
+                dma_addr_t dma_src, dma_dest;
+
                 total_tests++;
 
                 len = dmatest_random() % test_buf_size + 1;
@@ -226,10 +230,30 @@ static int dmatest_func(void *data)
                 dmatest_init_srcbuf(thread->srcbuf, src_off, len);
                 dmatest_init_dstbuf(thread->dstbuf, dst_off, len);
 
-                cookie = dma_async_memcpy_buf_to_buf(chan,
-                                thread->dstbuf + dst_off,
-                                thread->srcbuf + src_off,
-                                len);
+                dma_src = dma_map_single(dev->dev, thread->srcbuf + src_off,
+                                len, DMA_TO_DEVICE);
+                /* map with DMA_BIDIRECTIONAL to force writeback/invalidate */
+                dma_dest = dma_map_single(dev->dev, thread->dstbuf,
+                                test_buf_size, DMA_BIDIRECTIONAL);
+
+                tx = dev->device_prep_dma_memcpy(chan, dma_dest + dst_off,
+                                dma_src, len,
+                                DMA_CTRL_ACK | DMA_COMPL_SKIP_DEST_UNMAP);
+                if (!tx) {
+                        dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE);
+                        dma_unmap_single(dev->dev, dma_dest,
+                                        test_buf_size, DMA_BIDIRECTIONAL);
+                        pr_warning("%s: #%u: prep error with src_off=0x%x "
+                                        "dst_off=0x%x len=0x%x\n",
+                                        thread_name, total_tests - 1,
+                                        src_off, dst_off, len);
+                        msleep(100);
+                        failed_tests++;
+                        continue;
+                }
+                tx->callback = NULL;
+                cookie = tx->tx_submit(tx);
+
                 if (dma_submit_error(cookie)) {
                         pr_warning("%s: #%u: submit error %d with src_off=0x%x "
                                         "dst_off=0x%x len=0x%x\n",
@@ -253,6 +277,9 @@ static int dmatest_func(void *data)
                         failed_tests++;
                         continue;
                 }
+                /* Unmap by myself (see DMA_COMPL_SKIP_DEST_UNMAP above) */
+                dma_unmap_single(dev->dev, dma_dest,
+                                test_buf_size, DMA_BIDIRECTIONAL);
 
                 error_count = 0;
 
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index ca70a21afc68..70126a606239 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -822,7 +822,7 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev,
          */
         WARN_ON(fdev->feature != new_fsl_chan->feature);
 
-        new_fsl_chan->dev = &new_fsl_chan->common.dev->device;
+        new_fsl_chan->dev = fdev->dev;
         new_fsl_chan->reg_base = ioremap(new_fsl_chan->reg.start,
                         new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1);
 
@@ -875,7 +875,8 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev,
         }
 
         dev_info(fdev->dev, "#%d (%s), irq %d\n", new_fsl_chan->id,
-                                compatible, new_fsl_chan->irq);
+                 compatible,
+                 new_fsl_chan->irq != NO_IRQ ? new_fsl_chan->irq : fdev->irq);
 
         return 0;
 
@@ -890,7 +891,8 @@ err_no_reg:
 
 static void fsl_dma_chan_remove(struct fsl_dma_chan *fchan)
 {
-        free_irq(fchan->irq, fchan);
+        if (fchan->irq != NO_IRQ)
+                free_irq(fchan->irq, fchan);
         list_del(&fchan->common.device_node);
         iounmap(fchan->reg_base);
         kfree(fchan);
diff --git a/drivers/dma/ipu/Makefile b/drivers/dma/ipu/Makefile
new file mode 100644
index 000000000000..6704cf48326d
--- /dev/null
+++ b/drivers/dma/ipu/Makefile
@@ -0,0 +1 @@
+obj-y   += ipu_irq.o ipu_idmac.o
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
new file mode 100644
index 000000000000..1f154d08e98f
--- /dev/null
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -0,0 +1,1740 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/vmalloc.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <mach/ipu.h>
+
+#include "ipu_intern.h"
+
+#define FS_VF_IN_VALID  0x00000002
+#define FS_ENC_IN_VALID 0x00000001
+
+/*
+ * There can be only one, we could allocate it dynamically, but then we'd have
+ * to add an extra parameter to some functions, and use something as ugly as
+ *      struct ipu *ipu = to_ipu(to_idmac(ichan->dma_chan.device));
+ * in the ISR
+ */
+static struct ipu ipu_data;
+
+#define to_ipu(id) container_of(id, struct ipu, idmac)
+
+static u32 __idmac_read_icreg(struct ipu *ipu, unsigned long reg)
+{
+        return __raw_readl(ipu->reg_ic + reg);
+}
+
+#define idmac_read_icreg(ipu, reg) __idmac_read_icreg(ipu, reg - IC_CONF)
+
+static void __idmac_write_icreg(struct ipu *ipu, u32 value, unsigned long reg)
+{
+        __raw_writel(value, ipu->reg_ic + reg);
+}
+
+#define idmac_write_icreg(ipu, v, reg) __idmac_write_icreg(ipu, v, reg - IC_CONF)
+
+static u32 idmac_read_ipureg(struct ipu *ipu, unsigned long reg)
+{
+        return __raw_readl(ipu->reg_ipu + reg);
+}
+
+static void idmac_write_ipureg(struct ipu *ipu, u32 value, unsigned long reg)
+{
+        __raw_writel(value, ipu->reg_ipu + reg);
+}
+
+/*****************************************************************************
+ * IPU / IC common functions
+ */
+static void dump_idmac_reg(struct ipu *ipu)
+{
+        dev_dbg(ipu->dev, "IDMAC_CONF 0x%x, IC_CONF 0x%x, IDMAC_CHA_EN 0x%x, "
+                "IDMAC_CHA_PRI 0x%x, IDMAC_CHA_BUSY 0x%x\n",
+                idmac_read_icreg(ipu, IDMAC_CONF),
+                idmac_read_icreg(ipu, IC_CONF),
+                idmac_read_icreg(ipu, IDMAC_CHA_EN),
+                idmac_read_icreg(ipu, IDMAC_CHA_PRI),
+                idmac_read_icreg(ipu, IDMAC_CHA_BUSY));
+        dev_dbg(ipu->dev, "BUF0_RDY 0x%x, BUF1_RDY 0x%x, CUR_BUF 0x%x, "
+                "DB_MODE 0x%x, TASKS_STAT 0x%x\n",
+                idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY),
+                idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY),
+                idmac_read_ipureg(ipu, IPU_CHA_CUR_BUF),
+                idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL),
+                idmac_read_ipureg(ipu, IPU_TASKS_STAT));
+}
+
+static uint32_t bytes_per_pixel(enum pixel_fmt fmt)
+{
+        switch (fmt) {
+        case IPU_PIX_FMT_GENERIC:       /* generic data */
+        case IPU_PIX_FMT_RGB332:
+        case IPU_PIX_FMT_YUV420P:
+        case IPU_PIX_FMT_YUV422P:
+        default:
+                return 1;
+        case IPU_PIX_FMT_RGB565:
+        case IPU_PIX_FMT_YUYV:
+        case IPU_PIX_FMT_UYVY:
+                return 2;
+        case IPU_PIX_FMT_BGR24:
+        case IPU_PIX_FMT_RGB24:
+                return 3;
+        case IPU_PIX_FMT_GENERIC_32:    /* generic data */
+        case IPU_PIX_FMT_BGR32:
+        case IPU_PIX_FMT_RGB32:
+        case IPU_PIX_FMT_ABGR32:
+                return 4;
+        }
+}
+
+/* Enable / disable direct write to memory by the Camera Sensor Interface */
+static void ipu_ic_enable_task(struct ipu *ipu, enum ipu_channel channel)
+{
+        uint32_t ic_conf, mask;
+
+        switch (channel) {
+        case IDMAC_IC_0:
+                mask = IC_CONF_PRPENC_EN;
+                break;
+        case IDMAC_IC_7:
+                mask = IC_CONF_RWS_EN | IC_CONF_PRPENC_EN;
+                break;
+        default:
+                return;
+        }
+        ic_conf = idmac_read_icreg(ipu, IC_CONF) | mask;
+        idmac_write_icreg(ipu, ic_conf, IC_CONF);
+}
+
+static void ipu_ic_disable_task(struct ipu *ipu, enum ipu_channel channel)
+{
+        uint32_t ic_conf, mask;
+
+        switch (channel) {
+        case IDMAC_IC_0:
+                mask = IC_CONF_PRPENC_EN;
+                break;
+        case IDMAC_IC_7:
+                mask = IC_CONF_RWS_EN | IC_CONF_PRPENC_EN;
+                break;
+        default:
+                return;
+        }
+        ic_conf = idmac_read_icreg(ipu, IC_CONF) & ~mask;
+        idmac_write_icreg(ipu, ic_conf, IC_CONF);
+}
+
+static uint32_t ipu_channel_status(struct ipu *ipu, enum ipu_channel channel)
+{
+        uint32_t stat = TASK_STAT_IDLE;
+        uint32_t task_stat_reg = idmac_read_ipureg(ipu, IPU_TASKS_STAT);
+
+        switch (channel) {
+        case IDMAC_IC_7:
+                stat = (task_stat_reg & TSTAT_CSI2MEM_MASK) >>
+                        TSTAT_CSI2MEM_OFFSET;
+                break;
+        case IDMAC_IC_0:
+        case IDMAC_SDC_0:
+        case IDMAC_SDC_1:
+        default:
+                break;
+        }
+        return stat;
+}
+
+struct chan_param_mem_planar {
+        /* Word 0 */
+        u32     xv:10;
+        u32     yv:10;
+        u32     xb:12;
+
+        u32     yb:12;
+        u32     res1:2;
+        u32     nsb:1;
+        u32     lnpb:6;
+        u32     ubo_l:11;
+
+        u32     ubo_h:15;
+        u32     vbo_l:17;
+
+        u32     vbo_h:9;
+        u32     res2:3;
+        u32     fw:12;
+        u32     fh_l:8;
+
+        u32     fh_h:4;
+        u32     res3:28;
+
+        /* Word 1 */
+        u32     eba0;
+
+        u32     eba1;
+
+        u32     bpp:3;
+        u32     sl:14;
+        u32     pfs:3;
+        u32     bam:3;
+        u32     res4:2;
+        u32     npb:6;
+        u32     res5:1;
+
+        u32     sat:2;
+        u32     res6:30;
+} __attribute__ ((packed));
+
+struct chan_param_mem_interleaved {
+        /* Word 0 */
+        u32     xv:10;
+        u32     yv:10;
+        u32     xb:12;
+
+        u32     yb:12;
+        u32     sce:1;
+        u32     res1:1;
+        u32     nsb:1;
+        u32     lnpb:6;
+        u32     sx:10;
+        u32     sy_l:1;
+
+        u32     sy_h:9;
+        u32     ns:10;
+        u32     sm:10;
+        u32     sdx_l:3;
+
+        u32     sdx_h:2;
+        u32     sdy:5;
+        u32     sdrx:1;
+        u32     sdry:1;
+        u32     sdr1:1;
+        u32     res2:2;
+        u32     fw:12;
+        u32     fh_l:8;
+
+        u32     fh_h:4;
+        u32     res3:28;
+
+        /* Word 1 */
+        u32     eba0;
+
+        u32     eba1;
+
+        u32     bpp:3;
+        u32     sl:14;
+        u32     pfs:3;
+        u32     bam:3;
+        u32     res4:2;
+        u32     npb:6;
+        u32     res5:1;
+
+        u32     sat:2;
+        u32     scc:1;
+        u32     ofs0:5;
+        u32     ofs1:5;
+        u32     ofs2:5;
+        u32     ofs3:5;
+        u32     wid0:3;
+        u32     wid1:3;
+        u32     wid2:3;
+
+        u32     wid3:3;
+        u32     dec_sel:1;
+        u32     res6:28;
+} __attribute__ ((packed));
+
+union chan_param_mem {
+        struct chan_param_mem_planar            pp;
+        struct chan_param_mem_interleaved       ip;
+};
+
+static void ipu_ch_param_set_plane_offset(union chan_param_mem *params,
+                                          u32 u_offset, u32 v_offset)
+{
+        params->pp.ubo_l = u_offset & 0x7ff;
+        params->pp.ubo_h = u_offset >> 11;
+        params->pp.vbo_l = v_offset & 0x1ffff;
+        params->pp.vbo_h = v_offset >> 17;
+}
+
+static void ipu_ch_param_set_size(union chan_param_mem *params,
+                                  uint32_t pixel_fmt, uint16_t width,
+                                  uint16_t height, uint16_t stride)
+{
+        u32 u_offset;
+        u32 v_offset;
+
+        params->pp.fw           = width - 1;
+        params->pp.fh_l         = height - 1;
+        params->pp.fh_h         = (height - 1) >> 8;
+        params->pp.sl           = stride - 1;
+
+        switch (pixel_fmt) {
+        case IPU_PIX_FMT_GENERIC:
+                /*Represents 8-bit Generic data */
+                params->pp.bpp  = 3;
+                params->pp.pfs  = 7;
+                params->pp.npb  = 31;
+                params->pp.sat  = 2;            /* SAT = use 32-bit access */
+                break;
+        case IPU_PIX_FMT_GENERIC_32:
+                /*Represents 32-bit Generic data */
+                params->pp.bpp  = 0;
+                params->pp.pfs  = 7;
+                params->pp.npb  = 7;
+                params->pp.sat  = 2;            /* SAT = use 32-bit access */
+                break;
+        case IPU_PIX_FMT_RGB565:
+                params->ip.bpp  = 2;
+                params->ip.pfs  = 4;
+                params->ip.npb  = 7;
+                params->ip.sat  = 2;            /* SAT = 32-bit access */
+                params->ip.ofs0 = 0;            /* Red bit offset */
+                params->ip.ofs1 = 5;            /* Green bit offset */
+                params->ip.ofs2 = 11;           /* Blue bit offset */
+                params->ip.ofs3 = 16;           /* Alpha bit offset */
+                params->ip.wid0 = 4;            /* Red bit width - 1 */
+                params->ip.wid1 = 5;            /* Green bit width - 1 */
+                params->ip.wid2 = 4;            /* Blue bit width - 1 */
+                break;
+        case IPU_PIX_FMT_BGR24:
+                params->ip.bpp  = 1;            /* 24 BPP & RGB PFS */
+                params->ip.pfs  = 4;
+                params->ip.npb  = 7;
+                params->ip.sat  = 2;            /* SAT = 32-bit access */
+                params->ip.ofs0 = 0;            /* Red bit offset */
+                params->ip.ofs1 = 8;            /* Green bit offset */
+                params->ip.ofs2 = 16;           /* Blue bit offset */
+                params->ip.ofs3 = 24;           /* Alpha bit offset */
+                params->ip.wid0 = 7;            /* Red bit width - 1 */
+                params->ip.wid1 = 7;            /* Green bit width - 1 */
+                params->ip.wid2 = 7;            /* Blue bit width - 1 */
+                break;
+        case IPU_PIX_FMT_RGB24:
+                params->ip.bpp  = 1;            /* 24 BPP & RGB PFS */
+                params->ip.pfs  = 4;
+                params->ip.npb  = 7;
+                params->ip.sat  = 2;            /* SAT = 32-bit access */
+                params->ip.ofs0 = 16;           /* Red bit offset */
+                params->ip.ofs1 = 8;            /* Green bit offset */
+                params->ip.ofs2 = 0;            /* Blue bit offset */
+                params->ip.ofs3 = 24;           /* Alpha bit offset */
+                params->ip.wid0 = 7;            /* Red bit width - 1 */
+                params->ip.wid1 = 7;            /* Green bit width - 1 */
+                params->ip.wid2 = 7;            /* Blue bit width - 1 */
+                break;
+        case IPU_PIX_FMT_BGRA32:
+        case IPU_PIX_FMT_BGR32:
+                params->ip.bpp  = 0;
+                params->ip.pfs  = 4;
+                params->ip.npb  = 7;
+                params->ip.sat  = 2;            /* SAT = 32-bit access */
+                params->ip.ofs0 = 8;            /* Red bit offset */
+                params->ip.ofs1 = 16;           /* Green bit offset */
+                params->ip.ofs2 = 24;           /* Blue bit offset */
+                params->ip.ofs3 = 0;            /* Alpha bit offset */
+                params->ip.wid0 = 7;            /* Red bit width - 1 */
+                params->ip.wid1 = 7;            /* Green bit width - 1 */
+                params->ip.wid2 = 7;            /* Blue bit width - 1 */
+                params->ip.wid3 = 7;            /* Alpha bit width - 1 */
+                break;
+        case IPU_PIX_FMT_RGBA32:
+        case IPU_PIX_FMT_RGB32:
+                params->ip.bpp  = 0;
+                params->ip.pfs  = 4;
+                params->ip.npb  = 7;
+                params->ip.sat  = 2;            /* SAT = 32-bit access */
+                params->ip.ofs0 = 24;           /* Red bit offset */
+                params->ip.ofs1 = 16;           /* Green bit offset */
+                params->ip.ofs2 = 8;            /* Blue bit offset */
+                params->ip.ofs3 = 0;            /* Alpha bit offset */
+                params->ip.wid0 = 7;            /* Red bit width - 1 */
+                params->ip.wid1 = 7;            /* Green bit width - 1 */
+                params->ip.wid2 = 7;            /* Blue bit width - 1 */
+                params->ip.wid3 = 7;            /* Alpha bit width - 1 */
+                break;
+        case IPU_PIX_FMT_ABGR32:
+                params->ip.bpp  = 0;
+                params->ip.pfs  = 4;
+                params->ip.npb  = 7;
+                params->ip.sat  = 2;            /* SAT = 32-bit access */
+                params->ip.ofs0 = 8;            /* Red bit offset */
+                params->ip.ofs1 = 16;           /* Green bit offset */
+                params->ip.ofs2 = 24;           /* Blue bit offset */
+                params->ip.ofs3 = 0;            /* Alpha bit offset */
+                params->ip.wid0 = 7;            /* Red bit width - 1 */
+                params->ip.wid1 = 7;            /* Green bit width - 1 */
+                params->ip.wid2 = 7;            /* Blue bit width - 1 */
+                params->ip.wid3 = 7;            /* Alpha bit width - 1 */
+                break;
+        case IPU_PIX_FMT_UYVY:
+                params->ip.bpp  = 2;
+                params->ip.pfs  = 6;
+                params->ip.npb  = 7;
+                params->ip.sat  = 2;            /* SAT = 32-bit access */
+                break;
+        case IPU_PIX_FMT_YUV420P2:
+        case IPU_PIX_FMT_YUV420P:
+                params->ip.bpp  = 3;
+                params->ip.pfs  = 3;
+                params->ip.npb  = 7;
+                params->ip.sat  = 2;            /* SAT = 32-bit access */
+                u_offset = stride * height;
+                v_offset = u_offset + u_offset / 4;
+                ipu_ch_param_set_plane_offset(params, u_offset, v_offset);
+                break;
+        case IPU_PIX_FMT_YVU422P:
+                params->ip.bpp  = 3;
+                params->ip.pfs  = 2;
+                params->ip.npb  = 7;
+                params->ip.sat  = 2;            /* SAT = 32-bit access */
+                v_offset = stride * height;
+                u_offset = v_offset + v_offset / 2;
+                ipu_ch_param_set_plane_offset(params, u_offset, v_offset);
+                break;
+        case IPU_PIX_FMT_YUV422P:
+                params->ip.bpp  = 3;
+                params->ip.pfs  = 2;
+                params->ip.npb  = 7;
+                params->ip.sat  = 2;            /* SAT = 32-bit access */
+                u_offset = stride * height;
+                v_offset = u_offset + u_offset / 2;
+                ipu_ch_param_set_plane_offset(params, u_offset, v_offset);
+                break;
+        default:
+                dev_err(ipu_data.dev,
+                        "mxc ipu: unimplemented pixel format %d\n", pixel_fmt);
+                break;
+        }
+
+        params->pp.nsb = 1;
+}
+
+static void ipu_ch_param_set_burst_size(union chan_param_mem *params,
+                                        uint16_t burst_pixels)
+{
+        params->pp.npb = burst_pixels - 1;
+};
+
+static void ipu_ch_param_set_buffer(union chan_param_mem *params,
+                                    dma_addr_t buf0, dma_addr_t buf1)
+{
+        params->pp.eba0 = buf0;
+        params->pp.eba1 = buf1;
+};
+
+static void ipu_ch_param_set_rotation(union chan_param_mem *params,
+                                      enum ipu_rotate_mode rotate)
+{
+        params->pp.bam = rotate;
+};
+
+static void ipu_write_param_mem(uint32_t addr, uint32_t *data,
+                                uint32_t num_words)
+{
+        for (; num_words > 0; num_words--) {
+                dev_dbg(ipu_data.dev,
+                        "write param mem - addr = 0x%08X, data = 0x%08X\n",
+                        addr, *data);
+                idmac_write_ipureg(&ipu_data, addr, IPU_IMA_ADDR);
+                idmac_write_ipureg(&ipu_data, *data++, IPU_IMA_DATA);
+                addr++;
+                if ((addr & 0x7) == 5) {
+                        addr &= ~0x7;   /* set to word 0 */
+                        addr += 8;      /* increment to next row */
+                }
+        }
+}
+
+static int calc_resize_coeffs(uint32_t in_size, uint32_t out_size,
+                              uint32_t *resize_coeff,
+                              uint32_t *downsize_coeff)
+{
+        uint32_t temp_size;
+        uint32_t temp_downsize;
+
+        *resize_coeff   = 1 << 13;
+        *downsize_coeff = 1 << 13;
+
+        /* Cannot downsize more than 8:1 */
+        if (out_size << 3 < in_size)
+                return -EINVAL;
+
+        /* compute downsizing coefficient */
+        temp_downsize = 0;
+        temp_size = in_size;
+        while (temp_size >= out_size * 2 && temp_downsize < 2) {
+                temp_size >>= 1;
+                temp_downsize++;
+        }
+        *downsize_coeff = temp_downsize;
+
+        /*
+         * compute resizing coefficient using the following formula:
+         * resize_coeff = M*(SI -1)/(SO - 1)
+         * where M = 2^13, SI - input size, SO - output size
+         */
+        *resize_coeff = (8192L * (temp_size - 1)) / (out_size - 1);
+        if (*resize_coeff >= 16384L) {
+                dev_err(ipu_data.dev, "Warning! Overflow on resize coeff.\n");
+                *resize_coeff = 0x3FFF;
+        }
+
+        dev_dbg(ipu_data.dev, "resizing from %u -> %u pixels, "
+                "downsize=%u, resize=%u.%lu (reg=%u)\n", in_size, out_size,
+                *downsize_coeff, *resize_coeff >= 8192L ? 1 : 0,
+                ((*resize_coeff & 0x1FFF) * 10000L) / 8192L, *resize_coeff);
+
+        return 0;
+}
+
+static enum ipu_color_space format_to_colorspace(enum pixel_fmt fmt)
+{
+        switch (fmt) {
+        case IPU_PIX_FMT_RGB565:
+        case IPU_PIX_FMT_BGR24:
+        case IPU_PIX_FMT_RGB24:
+        case IPU_PIX_FMT_BGR32:
+        case IPU_PIX_FMT_RGB32:
+                return IPU_COLORSPACE_RGB;
+        default:
+                return IPU_COLORSPACE_YCBCR;
+        }
+}
+
+static int ipu_ic_init_prpenc(struct ipu *ipu,
+                              union ipu_channel_param *params, bool src_is_csi)
+{
+        uint32_t reg, ic_conf;
+        uint32_t downsize_coeff, resize_coeff;
+        enum ipu_color_space in_fmt, out_fmt;
+
+        /* Setup vertical resizing */
+        calc_resize_coeffs(params->video.in_height,
+                            params->video.out_height,
+                            &resize_coeff, &downsize_coeff);
+        reg = (downsize_coeff << 30) | (resize_coeff << 16);
+
+        /* Setup horizontal resizing */
+        calc_resize_coeffs(params->video.in_width,
+                            params->video.out_width,
+                            &resize_coeff, &downsize_coeff);
+        reg |= (downsize_coeff << 14) | resize_coeff;
+
+        /* Setup color space conversion */
+        in_fmt = format_to_colorspace(params->video.in_pixel_fmt);
+        out_fmt = format_to_colorspace(params->video.out_pixel_fmt);
+
+        /*
+         * Colourspace conversion unsupported yet - see _init_csc() in
+         * Freescale sources
+         */
+        if (in_fmt != out_fmt) {
+                dev_err(ipu->dev, "Colourspace conversion unsupported!\n");
+                return -EOPNOTSUPP;
+        }
+
+        idmac_write_icreg(ipu, reg, IC_PRP_ENC_RSC);
+
+        ic_conf = idmac_read_icreg(ipu, IC_CONF);
+
+        if (src_is_csi)
+                ic_conf &= ~IC_CONF_RWS_EN;
+        else
+                ic_conf |= IC_CONF_RWS_EN;
+
+        idmac_write_icreg(ipu, ic_conf, IC_CONF);
+
+        return 0;
+}
+
+static uint32_t dma_param_addr(uint32_t dma_ch)
+{
+        /* Channel Parameter Memory */
+        return 0x10000 | (dma_ch << 4);
+};
+
+static void ipu_channel_set_priority(struct ipu *ipu, enum ipu_channel channel,
+                                     bool prio)
+{
+        u32 reg = idmac_read_icreg(ipu, IDMAC_CHA_PRI);
+
+        if (prio)
+                reg |= 1UL << channel;
+        else
+                reg &= ~(1UL << channel);
+
+        idmac_write_icreg(ipu, reg, IDMAC_CHA_PRI);
+
+        dump_idmac_reg(ipu);
+}
+
+static uint32_t ipu_channel_conf_mask(enum ipu_channel channel)
+{
+        uint32_t mask;
+
+        switch (channel) {
+        case IDMAC_IC_0:
+        case IDMAC_IC_7:
+                mask = IPU_CONF_CSI_EN | IPU_CONF_IC_EN;
+                break;
+        case IDMAC_SDC_0:
+        case IDMAC_SDC_1:
+                mask = IPU_CONF_SDC_EN | IPU_CONF_DI_EN;
+                break;
+        default:
+                mask = 0;
+                break;
+        }
+
+        return mask;
+}
+
+/**
+ * ipu_enable_channel() - enable an IPU channel.
+ * @channel:    channel ID.
+ * @return:     0 on success or negative error code on failure.
+ */
+static int ipu_enable_channel(struct idmac *idmac, struct idmac_channel *ichan)
+{
+        struct ipu *ipu = to_ipu(idmac);
+        enum ipu_channel channel = ichan->dma_chan.chan_id;
+        uint32_t reg;
+        unsigned long flags;
+
+        spin_lock_irqsave(&ipu->lock, flags);
+
+        /* Reset to buffer 0 */
+        idmac_write_ipureg(ipu, 1UL << channel, IPU_CHA_CUR_BUF);
+        ichan->active_buffer = 0;
+        ichan->status = IPU_CHANNEL_ENABLED;
+
+        switch (channel) {
+        case IDMAC_SDC_0:
+        case IDMAC_SDC_1:
+        case IDMAC_IC_7:
+                ipu_channel_set_priority(ipu, channel, true);
+        default:
+                break;
+        }
+
+        reg = idmac_read_icreg(ipu, IDMAC_CHA_EN);
+
+        idmac_write_icreg(ipu, reg | (1UL << channel), IDMAC_CHA_EN);
+
+        ipu_ic_enable_task(ipu, channel);
+
+        spin_unlock_irqrestore(&ipu->lock, flags);
+        return 0;
+}
+
+/**
+ * ipu_init_channel_buffer() - initialize a buffer for logical IPU channel.
+ * @channel:    channel ID.
+ * @pixel_fmt:  pixel format of buffer. Pixel format is a FOURCC ASCII code.
+ * @width:      width of buffer in pixels.
+ * @height:     height of buffer in pixels.
+ * @stride:     stride length of buffer in pixels.
+ * @rot_mode:   rotation mode of buffer. A rotation setting other than
+ *              IPU_ROTATE_VERT_FLIP should only be used for input buffers of
+ *              rotation channels.
+ * @phyaddr_0:  buffer 0 physical address.
+ * @phyaddr_1:  buffer 1 physical address. Setting this to a value other than
+ *              NULL enables double buffering mode.
+ * @return:     0 on success or negative error code on failure.
+ */
+static int ipu_init_channel_buffer(struct idmac_channel *ichan,
+                                   enum pixel_fmt pixel_fmt,
+                                   uint16_t width, uint16_t height,
+                                   uint32_t stride,
+                                   enum ipu_rotate_mode rot_mode,
+                                   dma_addr_t phyaddr_0, dma_addr_t phyaddr_1)
+{
+        enum ipu_channel channel = ichan->dma_chan.chan_id;
+        struct idmac *idmac = to_idmac(ichan->dma_chan.device);
+        struct ipu *ipu = to_ipu(idmac);
+        union chan_param_mem params = {};
+        unsigned long flags;
+        uint32_t reg;
+        uint32_t stride_bytes;
+
+        stride_bytes = stride * bytes_per_pixel(pixel_fmt);
+
+        if (stride_bytes % 4) {
+                dev_err(ipu->dev,
+                        "Stride length must be 32-bit aligned, stride = %d, bytes = %d\n",
+                        stride, stride_bytes);
+                return -EINVAL;
+        }
+
+        /* IC channel's stride must be a multiple of 8 pixels */
+        if ((channel <= 13) && (stride % 8)) {
+                dev_err(ipu->dev, "Stride must be 8 pixel multiple\n");
+                return -EINVAL;
+        }
+
+        /* Build parameter memory data for DMA channel */
+        ipu_ch_param_set_size(&params, pixel_fmt, width, height, stride_bytes);
+        ipu_ch_param_set_buffer(&params, phyaddr_0, phyaddr_1);
+        ipu_ch_param_set_rotation(&params, rot_mode);
+        /* Some channels (rotation) have restriction on burst length */
+        switch (channel) {
+        case IDMAC_IC_7:        /* Hangs with burst 8, 16, other values
+                                   invalid - Table 44-30 */
+/*
+                ipu_ch_param_set_burst_size(&params, 8);
+ */
+                break;
+        case IDMAC_SDC_0:
+        case IDMAC_SDC_1:
+                /* In original code only IPU_PIX_FMT_RGB565 was setting burst */
+                ipu_ch_param_set_burst_size(&params, 16);
+                break;
+        case IDMAC_IC_0:
+        default:
+                break;
+        }
+
+        spin_lock_irqsave(&ipu->lock, flags);
+
+        ipu_write_param_mem(dma_param_addr(channel), (uint32_t *)&params, 10);
+
+        reg = idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL);
+
+        if (phyaddr_1)
+                reg |= 1UL << channel;
+        else
+                reg &= ~(1UL << channel);
+
+        idmac_write_ipureg(ipu, reg, IPU_CHA_DB_MODE_SEL);
+
+        ichan->status = IPU_CHANNEL_READY;
+
+        spin_unlock_irqrestore(ipu->lock, flags);
+
+        return 0;
+}
+
+/**
+ * ipu_select_buffer() - mark a channel's buffer as ready.
+ * @channel:    channel ID.
+ * @buffer_n:   buffer number to mark ready.
+ */
+static void ipu_select_buffer(enum ipu_channel channel, int buffer_n)
+{
+        /* No locking - this is a write-one-to-set register, cleared by IPU */
+        if (buffer_n == 0)
+                /* Mark buffer 0 as ready. */
+                idmac_write_ipureg(&ipu_data, 1UL << channel, IPU_CHA_BUF0_RDY);
+        else
+                /* Mark buffer 1 as ready. */
+                idmac_write_ipureg(&ipu_data, 1UL << channel, IPU_CHA_BUF1_RDY);
+}
+
+/**
+ * ipu_update_channel_buffer() - update physical address of a channel buffer.
+ * @channel:    channel ID.
+ * @buffer_n:   buffer number to update.
+ *              0 or 1 are the only valid values.
+ * @phyaddr:    buffer physical address.
+ * @return:     Returns 0 on success or negative error code on failure. This
+ *              function will fail if the buffer is set to ready.
+ */
+/* Called under spin_lock(_irqsave)(&ichan->lock) */
+static int ipu_update_channel_buffer(enum ipu_channel channel,
+                                     int buffer_n, dma_addr_t phyaddr)
+{
+        uint32_t reg;
+        unsigned long flags;
+
+        spin_lock_irqsave(&ipu_data.lock, flags);
+
+        if (buffer_n == 0) {
+                reg = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF0_RDY);
+                if (reg & (1UL << channel)) {
+                        spin_unlock_irqrestore(&ipu_data.lock, flags);
+                        return -EACCES;
+                }
+
+                /* 44.3.3.1.9 - Row Number 1 (WORD1, offset 0) */
+                idmac_write_ipureg(&ipu_data, dma_param_addr(channel) +
+                                   0x0008UL, IPU_IMA_ADDR);
+                idmac_write_ipureg(&ipu_data, phyaddr, IPU_IMA_DATA);
+        } else {
+                reg = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF1_RDY);
+                if (reg & (1UL << channel)) {
+                        spin_unlock_irqrestore(&ipu_data.lock, flags);
+                        return -EACCES;
+                }
+
+                /* Check if double-buffering is already enabled */
+                reg = idmac_read_ipureg(&ipu_data, IPU_CHA_DB_MODE_SEL);
+
+                if (!(reg & (1UL << channel)))
+                        idmac_write_ipureg(&ipu_data, reg | (1UL << channel),
+                                           IPU_CHA_DB_MODE_SEL);
+
+                /* 44.3.3.1.9 - Row Number 1 (WORD1, offset 1) */
+                idmac_write_ipureg(&ipu_data, dma_param_addr(channel) +
+                                   0x0009UL, IPU_IMA_ADDR);
+                idmac_write_ipureg(&ipu_data, phyaddr, IPU_IMA_DATA);
+        }
+
+        spin_unlock_irqrestore(&ipu_data.lock, flags);
+
+        return 0;
+}
+
+/* Called under spin_lock_irqsave(&ichan->lock) */
+static int ipu_submit_channel_buffers(struct idmac_channel *ichan,
+                                      struct idmac_tx_desc *desc)
+{
+        struct scatterlist *sg;
+        int i, ret = 0;
+
+        for (i = 0, sg = desc->sg; i < 2 && sg; i++) {
+                if (!ichan->sg[i]) {
+                        ichan->sg[i] = sg;
+
+                        /*
+                         * On first invocation this shouldn't be necessary, the
+                         * call to ipu_init_channel_buffer() above will set
+                         * addresses for us, so we could make it conditional
+                         * on status >= IPU_CHANNEL_ENABLED, but doing it again
+                         * shouldn't hurt either.
+                         */
+                        ret = ipu_update_channel_buffer(ichan->dma_chan.chan_id, i,
+                                                        sg_dma_address(sg));
+                        if (ret < 0)
+                                return ret;
+
+                        ipu_select_buffer(ichan->dma_chan.chan_id, i);
+
+                        sg = sg_next(sg);
+                }
+        }
+
+        return ret;
+}
+
+static dma_cookie_t idmac_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+        struct idmac_tx_desc *desc = to_tx_desc(tx);
+        struct idmac_channel *ichan = to_idmac_chan(tx->chan);
+        struct idmac *idmac = to_idmac(tx->chan->device);
+        struct ipu *ipu = to_ipu(idmac);
+        dma_cookie_t cookie;
+        unsigned long flags;
+
+        /* Sanity check */
+        if (!list_empty(&desc->list)) {
+                /* The descriptor doesn't belong to client */
+                dev_err(&ichan->dma_chan.dev->device,
+                        "Descriptor %p not prepared!\n", tx);
+                return -EBUSY;
+        }
+
+        mutex_lock(&ichan->chan_mutex);
+
+        if (ichan->status < IPU_CHANNEL_READY) {
+                struct idmac_video_param *video = &ichan->params.video;
+                /*
+                 * Initial buffer assignment - the first two sg-entries from
+                 * the descriptor will end up in the IDMAC buffers
+                 */
+                dma_addr_t dma_1 = sg_is_last(desc->sg) ? 0 :
+                        sg_dma_address(&desc->sg[1]);
+
+                WARN_ON(ichan->sg[0] || ichan->sg[1]);
+
+                cookie = ipu_init_channel_buffer(ichan,
+                                                 video->out_pixel_fmt,
+                                                 video->out_width,
+                                                 video->out_height,
+                                                 video->out_stride,
+                                                 IPU_ROTATE_NONE,
+                                                 sg_dma_address(&desc->sg[0]),
+                                                 dma_1);
+                if (cookie < 0)
+                        goto out;
+        }
+
+        /* ipu->lock can be taken under ichan->lock, but not v.v. */
+        spin_lock_irqsave(&ichan->lock, flags);
+
+        /* submit_buffers() atomically verifies and fills empty sg slots */
+        cookie = ipu_submit_channel_buffers(ichan, desc);
+
+        spin_unlock_irqrestore(&ichan->lock, flags);
+
+        if (cookie < 0)
+                goto out;
+
+        cookie = ichan->dma_chan.cookie;
+
+        if (++cookie < 0)
+                cookie = 1;
+
+        /* from dmaengine.h: "last cookie value returned to client" */
+        ichan->dma_chan.cookie = cookie;
+        tx->cookie = cookie;
+        spin_lock_irqsave(&ichan->lock, flags);
+        list_add_tail(&desc->list, &ichan->queue);
+        spin_unlock_irqrestore(&ichan->lock, flags);
+
+        if (ichan->status < IPU_CHANNEL_ENABLED) {
+                int ret = ipu_enable_channel(idmac, ichan);
+                if (ret < 0) {
+                        cookie = ret;
+                        spin_lock_irqsave(&ichan->lock, flags);
+                        list_del_init(&desc->list);
+                        spin_unlock_irqrestore(&ichan->lock, flags);
+                        tx->cookie = cookie;
+                        ichan->dma_chan.cookie = cookie;
+                }
+        }
+
+        dump_idmac_reg(ipu);
+
+out:
+        mutex_unlock(&ichan->chan_mutex);
+
+        return cookie;
+}
+
+/* Called with ichan->chan_mutex held */
+static int idmac_desc_alloc(struct idmac_channel *ichan, int n)
+{
+        struct idmac_tx_desc *desc = vmalloc(n * sizeof(struct idmac_tx_desc));
+        struct idmac *idmac = to_idmac(ichan->dma_chan.device);
+
+        if (!desc)
+                return -ENOMEM;
+
+        /* No interrupts, just disable the tasklet for a moment */
+        tasklet_disable(&to_ipu(idmac)->tasklet);
+
+        ichan->n_tx_desc = n;
+        ichan->desc = desc;
+        INIT_LIST_HEAD(&ichan->queue);
+        INIT_LIST_HEAD(&ichan->free_list);
+
+        while (n--) {
+                struct dma_async_tx_descriptor *txd = &desc->txd;
+
+                memset(txd, 0, sizeof(*txd));
+                dma_async_tx_descriptor_init(txd, &ichan->dma_chan);
+                txd->tx_submit          = idmac_tx_submit;
+                txd->chan               = &ichan->dma_chan;
+                INIT_LIST_HEAD(&txd->tx_list);
+
+                list_add(&desc->list, &ichan->free_list);
+
+                desc++;
+        }
+
+        tasklet_enable(&to_ipu(idmac)->tasklet);
+
+        return 0;
+}
+
+/**
+ * ipu_init_channel() - initialize an IPU channel.
+ * @idmac:      IPU DMAC context.
+ * @ichan:      pointer to the channel object.
+ * @return      0 on success or negative error code on failure.
+ */
+static int ipu_init_channel(struct idmac *idmac, struct idmac_channel *ichan)
+{
+        union ipu_channel_param *params = &ichan->params;
+        uint32_t ipu_conf;
+        enum ipu_channel channel = ichan->dma_chan.chan_id;
+        unsigned long flags;
+        uint32_t reg;
+        struct ipu *ipu = to_ipu(idmac);
+        int ret = 0, n_desc = 0;
+
+        dev_dbg(ipu->dev, "init channel = %d\n", channel);
+
+        if (channel != IDMAC_SDC_0 && channel != IDMAC_SDC_1 &&
+            channel != IDMAC_IC_7)
+                return -EINVAL;
+
+        spin_lock_irqsave(&ipu->lock, flags);
+
+        switch (channel) {
+        case IDMAC_IC_7:
+                n_desc = 16;
+                reg = idmac_read_icreg(ipu, IC_CONF);
+                idmac_write_icreg(ipu, reg & ~IC_CONF_CSI_MEM_WR_EN, IC_CONF);
+                break;
+        case IDMAC_IC_0:
+                n_desc = 16;
+                reg = idmac_read_ipureg(ipu, IPU_FS_PROC_FLOW);
+                idmac_write_ipureg(ipu, reg & ~FS_ENC_IN_VALID, IPU_FS_PROC_FLOW);
+                ret = ipu_ic_init_prpenc(ipu, params, true);
+                break;
+        case IDMAC_SDC_0:
+        case IDMAC_SDC_1:
+                n_desc = 4;
+        default:
+                break;
+        }
+
+        ipu->channel_init_mask |= 1L << channel;
+
+        /* Enable IPU sub module */
+        ipu_conf = idmac_read_ipureg(ipu, IPU_CONF) |
+                ipu_channel_conf_mask(channel);
+        idmac_write_ipureg(ipu, ipu_conf, IPU_CONF);
+
+        spin_unlock_irqrestore(&ipu->lock, flags);
+
+        if (n_desc && !ichan->desc)
+                ret = idmac_desc_alloc(ichan, n_desc);
+
+        dump_idmac_reg(ipu);
+
+        return ret;
+}
+
+/**
+ * ipu_uninit_channel() - uninitialize an IPU channel.
+ * @idmac:      IPU DMAC context.
+ * @ichan:      pointer to the channel object.
+ */
+static void ipu_uninit_channel(struct idmac *idmac, struct idmac_channel *ichan)
+{
+        enum ipu_channel channel = ichan->dma_chan.chan_id;
+        unsigned long flags;
+        uint32_t reg;
+        unsigned long chan_mask = 1UL << channel;
+        uint32_t ipu_conf;
+        struct ipu *ipu = to_ipu(idmac);
+
+        spin_lock_irqsave(&ipu->lock, flags);
+
+        if (!(ipu->channel_init_mask & chan_mask)) {
+                dev_err(ipu->dev, "Channel already uninitialized %d\n",
+                        channel);
+                spin_unlock_irqrestore(&ipu->lock, flags);
+                return;
+        }
+
+        /* Reset the double buffer */
+        reg = idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL);
+        idmac_write_ipureg(ipu, reg & ~chan_mask, IPU_CHA_DB_MODE_SEL);
+
+        ichan->sec_chan_en = false;
+
+        switch (channel) {
+        case IDMAC_IC_7:
+                reg = idmac_read_icreg(ipu, IC_CONF);
+                idmac_write_icreg(ipu, reg & ~(IC_CONF_RWS_EN | IC_CONF_PRPENC_EN),
+                             IC_CONF);
+                break;
+        case IDMAC_IC_0:
+                reg = idmac_read_icreg(ipu, IC_CONF);
+                idmac_write_icreg(ipu, reg & ~(IC_CONF_PRPENC_EN | IC_CONF_PRPENC_CSC1),
+                                  IC_CONF);
+                break;
+        case IDMAC_SDC_0:
+        case IDMAC_SDC_1:
+        default:
+                break;
+        }
+
+        ipu->channel_init_mask &= ~(1L << channel);
+
+        ipu_conf = idmac_read_ipureg(ipu, IPU_CONF) &
+                ~ipu_channel_conf_mask(channel);
+        idmac_write_ipureg(ipu, ipu_conf, IPU_CONF);
+
+        spin_unlock_irqrestore(&ipu->lock, flags);
+
+        ichan->n_tx_desc = 0;
+        vfree(ichan->desc);
+        ichan->desc = NULL;
+}
+
+/**
+ * ipu_disable_channel() - disable an IPU channel.
+ * @idmac:              IPU DMAC context.
+ * @ichan:              channel object pointer.
+ * @wait_for_stop:      flag to set whether to wait for channel end of frame or
+ *                      return immediately.
+ * @return:             0 on success or negative error code on failure.
+ */
+static int ipu_disable_channel(struct idmac *idmac, struct idmac_channel *ichan,
+                               bool wait_for_stop)
+{
+        enum ipu_channel channel = ichan->dma_chan.chan_id;
+        struct ipu *ipu = to_ipu(idmac);
+        uint32_t reg;
+        unsigned long flags;
+        unsigned long chan_mask = 1UL << channel;
+        unsigned int timeout;
+
+        if (wait_for_stop && channel != IDMAC_SDC_1 && channel != IDMAC_SDC_0) {
+                timeout = 40;
+                /* This waiting always fails. Related to spurious irq problem */
+                while ((idmac_read_icreg(ipu, IDMAC_CHA_BUSY) & chan_mask) ||
+                       (ipu_channel_status(ipu, channel) == TASK_STAT_ACTIVE)) {
+                        timeout--;
+                        msleep(10);
+
+                        if (!timeout) {
+                                dev_dbg(ipu->dev,
+                                        "Warning: timeout waiting for channel %u to "
+                                        "stop: buf0_rdy = 0x%08X, buf1_rdy = 0x%08X, "
+                                        "busy = 0x%08X, tstat = 0x%08X\n", channel,
+                                        idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY),
+                                        idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY),
+                                        idmac_read_icreg(ipu, IDMAC_CHA_BUSY),
+                                        idmac_read_ipureg(ipu, IPU_TASKS_STAT));
+                                break;
+                        }
+                }
+                dev_dbg(ipu->dev, "timeout = %d * 10ms\n", 40 - timeout);
+        }
+        /* SDC BG and FG must be disabled before DMA is disabled */
+        if (wait_for_stop && (channel == IDMAC_SDC_0 ||
+                              channel == IDMAC_SDC_1)) {
+                for (timeout = 5;
+                     timeout && !ipu_irq_status(ichan->eof_irq); timeout--)
+                        msleep(5);
+        }
+
+        spin_lock_irqsave(&ipu->lock, flags);
+
+        /* Disable IC task */
+        ipu_ic_disable_task(ipu, channel);
+
+        /* Disable DMA channel(s) */
+        reg = idmac_read_icreg(ipu, IDMAC_CHA_EN);
+        idmac_write_icreg(ipu, reg & ~chan_mask, IDMAC_CHA_EN);
+
+        /*
+         * Problem (observed with channel DMAIC_7): after enabling the channel
+         * and initialising buffers, there comes an interrupt with current still
+         * pointing at buffer 0, whereas it should use buffer 0 first and only
+         * generate an interrupt when it is done, then current should already
+         * point to buffer 1. This spurious interrupt also comes on channel
+         * DMASDC_0. With DMAIC_7 normally, is we just leave the ISR after the
+         * first interrupt, there comes the second with current correctly
+         * pointing to buffer 1 this time. But sometimes this second interrupt
+         * doesn't come and the channel hangs. Clearing BUFx_RDY when disabling
+         * the channel seems to prevent the channel from hanging, but it doesn't
+         * prevent the spurious interrupt. This might also be unsafe. Think
+         * about the IDMAC controller trying to switch to a buffer, when we
+         * clear the ready bit, and re-enable it a moment later.
+         */
+        reg = idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY);
+        idmac_write_ipureg(ipu, 0, IPU_CHA_BUF0_RDY);
+        idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF0_RDY);
+
+        reg = idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY);
+        idmac_write_ipureg(ipu, 0, IPU_CHA_BUF1_RDY);
+        idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF1_RDY);
+
+        spin_unlock_irqrestore(&ipu->lock, flags);
+
+        return 0;
+}
+
+/*
+ * We have several possibilities here:
+ * current BUF          next BUF
+ *
+ * not last sg          next not last sg
+ * not last sg          next last sg
+ * last sg              first sg from next descriptor
+ * last sg              NULL
+ *
+ * Besides, the descriptor queue might be empty or not. We process all these
+ * cases carefully.
+ */
+static irqreturn_t idmac_interrupt(int irq, void *dev_id)
+{
+        struct idmac_channel *ichan = dev_id;
+        unsigned int chan_id = ichan->dma_chan.chan_id;
+        struct scatterlist **sg, *sgnext, *sgnew = NULL;
+        /* Next transfer descriptor */
+        struct idmac_tx_desc *desc = NULL, *descnew;
+        dma_async_tx_callback callback;
+        void *callback_param;
+        bool done = false;
+        u32     ready0 = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF0_RDY),
+                ready1 = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF1_RDY),
+                curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF);
+
+        /* IDMAC has cleared the respective BUFx_RDY bit, we manage the buffer */
+
+        pr_debug("IDMAC irq %d\n", irq);
+        /* Other interrupts do not interfere with this channel */
+        spin_lock(&ichan->lock);
+
+        if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 &&
+                     ((curbuf >> chan_id) & 1) == ichan->active_buffer)) {
+                int i = 100;
+
+                /* This doesn't help. See comment in ipu_disable_channel() */
+                while (--i) {
+                        curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF);
+                        if (((curbuf >> chan_id) & 1) != ichan->active_buffer)
+                                break;
+                        cpu_relax();
+                }
+
+                if (!i) {
+                        spin_unlock(&ichan->lock);
+                        dev_dbg(ichan->dma_chan.device->dev,
+                                "IRQ on active buffer on channel %x, active "
+                                "%d, ready %x, %x, current %x!\n", chan_id,
+                                ichan->active_buffer, ready0, ready1, curbuf);
+                        return IRQ_NONE;
+                }
+        }
+
+        if (unlikely((ichan->active_buffer && (ready1 >> chan_id) & 1) ||
+                     (!ichan->active_buffer && (ready0 >> chan_id) & 1)
+                     )) {
+                spin_unlock(&ichan->lock);
+                dev_dbg(ichan->dma_chan.device->dev,
+                        "IRQ with active buffer still ready on channel %x, "
+                        "active %d, ready %x, %x!\n", chan_id,
+                        ichan->active_buffer, ready0, ready1);
+                return IRQ_NONE;
+        }
+
+        if (unlikely(list_empty(&ichan->queue))) {
+                spin_unlock(&ichan->lock);
+                dev_err(ichan->dma_chan.device->dev,
+                        "IRQ without queued buffers on channel %x, active %d, "
+                        "ready %x, %x!\n", chan_id,
+                        ichan->active_buffer, ready0, ready1);
+                return IRQ_NONE;
+        }
+
+        /*
+         * active_buffer is a software flag, it shows which buffer we are
+         * currently expecting back from the hardware, IDMAC should be
+         * processing the other buffer already
+         */
+        sg = &ichan->sg[ichan->active_buffer];
+        sgnext = ichan->sg[!ichan->active_buffer];
+
+        /*
+         * if sgnext == NULL sg must be the last element in a scatterlist and
+         * queue must be empty
+         */
+        if (unlikely(!sgnext)) {
+                if (unlikely(sg_next(*sg))) {
+                        dev_err(ichan->dma_chan.device->dev,
+                                "Broken buffer-update locking on channel %x!\n",
+                                chan_id);
+                        /* We'll let the user catch up */
+                } else {
+                        /* Underrun */
+                        ipu_ic_disable_task(&ipu_data, chan_id);
+                        dev_dbg(ichan->dma_chan.device->dev,
+                                "Underrun on channel %x\n", chan_id);
+                        ichan->status = IPU_CHANNEL_READY;
+                        /* Continue to check for complete descriptor */
+                }
+        }
+
+        desc = list_entry(ichan->queue.next, struct idmac_tx_desc, list);
+
+        /* First calculate and submit the next sg element */
+        if (likely(sgnext))
+                sgnew = sg_next(sgnext);
+
+        if (unlikely(!sgnew)) {
+                /* Start a new scatterlist, if any queued */
+                if (likely(desc->list.next != &ichan->queue)) {
+                        descnew = list_entry(desc->list.next,
+                                             struct idmac_tx_desc, list);
+                        sgnew = &descnew->sg[0];
+                }
+        }
+
+        if (unlikely(!sg_next(*sg)) || !sgnext) {
+                /*
+                 * Last element in scatterlist done, remove from the queue,
+                 * _init for debugging
+                 */
+                list_del_init(&desc->list);
+                done = true;
+        }
+
+        *sg = sgnew;
+
+        if (likely(sgnew)) {
+                int ret;
+
+                ret = ipu_update_channel_buffer(chan_id, ichan->active_buffer,
+                                                sg_dma_address(*sg));
+                if (ret < 0)
+                        dev_err(ichan->dma_chan.device->dev,
+                                "Failed to update buffer on channel %x buffer %d!\n",
+                                chan_id, ichan->active_buffer);
+                else
+                        ipu_select_buffer(chan_id, ichan->active_buffer);
+        }
+
+        /* Flip the active buffer - even if update above failed */
+        ichan->active_buffer = !ichan->active_buffer;
+        if (done)
+                ichan->completed = desc->txd.cookie;
+
+        callback = desc->txd.callback;
+        callback_param = desc->txd.callback_param;
+
+        spin_unlock(&ichan->lock);
+
+        if (done && (desc->txd.flags & DMA_PREP_INTERRUPT) && callback)
+                callback(callback_param);
+
+        return IRQ_HANDLED;
+}
+
+static void ipu_gc_tasklet(unsigned long arg)
+{
+        struct ipu *ipu = (struct ipu *)arg;
+        int i;
+
+        for (i = 0; i < IPU_CHANNELS_NUM; i++) {
+                struct idmac_channel *ichan = ipu->channel + i;
+                struct idmac_tx_desc *desc;
+                unsigned long flags;
+                int j;
+
+                for (j = 0; j < ichan->n_tx_desc; j++) {
+                        desc = ichan->desc + j;
+                        spin_lock_irqsave(&ichan->lock, flags);
+                        if (async_tx_test_ack(&desc->txd)) {
+                                list_move(&desc->list, &ichan->free_list);
+                                async_tx_clear_ack(&desc->txd);
+                        }
+                        spin_unlock_irqrestore(&ichan->lock, flags);
+                }
+        }
+}
+
+/*
+ * At the time .device_alloc_chan_resources() method is called, we cannot know,
+ * whether the client will accept the channel. Thus we must only check, if we
+ * can satisfy client's request but the only real criterion to verify, whether
+ * the client has accepted our offer is the client_count. That's why we have to
+ * perform the rest of our allocation tasks on the first call to this function.
+ */
+static struct dma_async_tx_descriptor *idmac_prep_slave_sg(struct dma_chan *chan,
+                struct scatterlist *sgl, unsigned int sg_len,
+                enum dma_data_direction direction, unsigned long tx_flags)
+{
+        struct idmac_channel *ichan = to_idmac_chan(chan);
+        struct idmac_tx_desc *desc = NULL;
+        struct dma_async_tx_descriptor *txd = NULL;
+        unsigned long flags;
+
+        /* We only can handle these three channels so far */
+        if (ichan->dma_chan.chan_id != IDMAC_SDC_0 && ichan->dma_chan.chan_id != IDMAC_SDC_1 &&
+            ichan->dma_chan.chan_id != IDMAC_IC_7)
+                return NULL;
+
+        if (direction != DMA_FROM_DEVICE && direction != DMA_TO_DEVICE) {
+                dev_err(chan->device->dev, "Invalid DMA direction %d!\n", direction);
+                return NULL;
+        }
+
+        mutex_lock(&ichan->chan_mutex);
+
+        spin_lock_irqsave(&ichan->lock, flags);
+        if (!list_empty(&ichan->free_list)) {
+                desc = list_entry(ichan->free_list.next,
+                                  struct idmac_tx_desc, list);
+
+                list_del_init(&desc->list);
+
+                desc->sg_len    = sg_len;
+                desc->sg        = sgl;
+                txd             = &desc->txd;
+                txd->flags      = tx_flags;
+        }
+        spin_unlock_irqrestore(&ichan->lock, flags);
+
+        mutex_unlock(&ichan->chan_mutex);
+
+        tasklet_schedule(&to_ipu(to_idmac(chan->device))->tasklet);
+
+        return txd;
+}
+
+/* Re-select the current buffer and re-activate the channel */
+static void idmac_issue_pending(struct dma_chan *chan)
+{
+        struct idmac_channel *ichan = to_idmac_chan(chan);
+        struct idmac *idmac = to_idmac(chan->device);
+        struct ipu *ipu = to_ipu(idmac);
+        unsigned long flags;
+
+        /* This is not always needed, but doesn't hurt either */
+        spin_lock_irqsave(&ipu->lock, flags);
+        ipu_select_buffer(ichan->dma_chan.chan_id, ichan->active_buffer);
+        spin_unlock_irqrestore(&ipu->lock, flags);
+
+        /*
+         * Might need to perform some parts of initialisation from
+         * ipu_enable_channel(), but not all, we do not want to reset to buffer
+         * 0, don't need to set priority again either, but re-enabling the task
+         * and the channel might be a good idea.
+         */
+}
+
+static void __idmac_terminate_all(struct dma_chan *chan)
+{
+        struct idmac_channel *ichan = to_idmac_chan(chan);
+        struct idmac *idmac = to_idmac(chan->device);
+        unsigned long flags;
+        int i;
+
+        ipu_disable_channel(idmac, ichan,
+                            ichan->status >= IPU_CHANNEL_ENABLED);
+
+        tasklet_disable(&to_ipu(idmac)->tasklet);
+
+        /* ichan->queue is modified in ISR, have to spinlock */
+        spin_lock_irqsave(&ichan->lock, flags);
+        list_splice_init(&ichan->queue, &ichan->free_list);
+
+        if (ichan->desc)
+                for (i = 0; i < ichan->n_tx_desc; i++) {
+                        struct idmac_tx_desc *desc = ichan->desc + i;
+                        if (list_empty(&desc->list))
+                                /* Descriptor was prepared, but not submitted */
+                                list_add(&desc->list,
+                                         &ichan->free_list);
+
+                        async_tx_clear_ack(&desc->txd);
+                }
+
+        ichan->sg[0] = NULL;
+        ichan->sg[1] = NULL;
+        spin_unlock_irqrestore(&ichan->lock, flags);
+
+        tasklet_enable(&to_ipu(idmac)->tasklet);
+
+        ichan->status = IPU_CHANNEL_INITIALIZED;
+}
+
+static void idmac_terminate_all(struct dma_chan *chan)
+{
+        struct idmac_channel *ichan = to_idmac_chan(chan);
+
+        mutex_lock(&ichan->chan_mutex);
+
+        __idmac_terminate_all(chan);
+
+        mutex_unlock(&ichan->chan_mutex);
+}
+
+static int idmac_alloc_chan_resources(struct dma_chan *chan)
+{
+        struct idmac_channel *ichan = to_idmac_chan(chan);
+        struct idmac *idmac = to_idmac(chan->device);
+        int ret;
+
+        /* dmaengine.c now guarantees to only offer free channels */
+        BUG_ON(chan->client_count > 1);
+        WARN_ON(ichan->status != IPU_CHANNEL_FREE);
+
+        chan->cookie            = 1;
+        ichan->completed        = -ENXIO;
+
+        ret = ipu_irq_map(ichan->dma_chan.chan_id);
+        if (ret < 0)
+                goto eimap;
+
+        ichan->eof_irq = ret;
+        ret = request_irq(ichan->eof_irq, idmac_interrupt, 0,
+                          ichan->eof_name, ichan);
+        if (ret < 0)
+                goto erirq;
+
+        ret = ipu_init_channel(idmac, ichan);
+        if (ret < 0)
+                goto eichan;
+
+        ichan->status = IPU_CHANNEL_INITIALIZED;
+
+        dev_dbg(&ichan->dma_chan.dev->device, "Found channel 0x%x, irq %d\n",
+                ichan->dma_chan.chan_id, ichan->eof_irq);
+
+        return ret;
+
+eichan:
+        free_irq(ichan->eof_irq, ichan);
+erirq:
+        ipu_irq_unmap(ichan->dma_chan.chan_id);
+eimap:
+        return ret;
+}
+
+static void idmac_free_chan_resources(struct dma_chan *chan)
+{
+        struct idmac_channel *ichan = to_idmac_chan(chan);
+        struct idmac *idmac = to_idmac(chan->device);
+
+        mutex_lock(&ichan->chan_mutex);
+
+        __idmac_terminate_all(chan);
+
+        if (ichan->status > IPU_CHANNEL_FREE) {
+                free_irq(ichan->eof_irq, ichan);
+                ipu_irq_unmap(ichan->dma_chan.chan_id);
+        }
+
+        ichan->status = IPU_CHANNEL_FREE;
+
+        ipu_uninit_channel(idmac, ichan);
+
+        mutex_unlock(&ichan->chan_mutex);
+
+        tasklet_schedule(&to_ipu(idmac)->tasklet);
+}
+
+static enum dma_status idmac_is_tx_complete(struct dma_chan *chan,
+                dma_cookie_t cookie, dma_cookie_t *done, dma_cookie_t *used)
+{
+        struct idmac_channel *ichan = to_idmac_chan(chan);
+
+        if (done)
+                *done = ichan->completed;
+        if (used)
+                *used = chan->cookie;
+        if (cookie != chan->cookie)
+                return DMA_ERROR;
+        return DMA_SUCCESS;
+}
+
+static int __init ipu_idmac_init(struct ipu *ipu)
+{
+        struct idmac *idmac = &ipu->idmac;
+        struct dma_device *dma = &idmac->dma;
+        int i;
+
+        dma_cap_set(DMA_SLAVE, dma->cap_mask);
+        dma_cap_set(DMA_PRIVATE, dma->cap_mask);
+
+        /* Compulsory common fields */
+        dma->dev                                = ipu->dev;
+        dma->device_alloc_chan_resources        = idmac_alloc_chan_resources;
+        dma->device_free_chan_resources         = idmac_free_chan_resources;
+        dma->device_is_tx_complete              = idmac_is_tx_complete;
+        dma->device_issue_pending               = idmac_issue_pending;
+
+        /* Compulsory for DMA_SLAVE fields */
+        dma->device_prep_slave_sg               = idmac_prep_slave_sg;
+        dma->device_terminate_all               = idmac_terminate_all;
+
+        INIT_LIST_HEAD(&dma->channels);
+        for (i = 0; i < IPU_CHANNELS_NUM; i++) {
+                struct idmac_channel *ichan = ipu->channel + i;
+                struct dma_chan *dma_chan = &ichan->dma_chan;
+
+                spin_lock_init(&ichan->lock);
+                mutex_init(&ichan->chan_mutex);
+
+                ichan->status           = IPU_CHANNEL_FREE;
+                ichan->sec_chan_en      = false;
+                ichan->completed        = -ENXIO;
+                snprintf(ichan->eof_name, sizeof(ichan->eof_name), "IDMAC EOF %d", i);
+
+                dma_chan->device        = &idmac->dma;
+                dma_chan->cookie        = 1;
+                dma_chan->chan_id       = i;
+                list_add_tail(&ichan->dma_chan.device_node, &dma->channels);
+        }
+
+        idmac_write_icreg(ipu, 0x00000070, IDMAC_CONF);
+
+        return dma_async_device_register(&idmac->dma);
+}
+
+static void ipu_idmac_exit(struct ipu *ipu)
+{
+        int i;
+        struct idmac *idmac = &ipu->idmac;
+
+        for (i = 0; i < IPU_CHANNELS_NUM; i++) {
+                struct idmac_channel *ichan = ipu->channel + i;
+
+                idmac_terminate_all(&ichan->dma_chan);
+                idmac_prep_slave_sg(&ichan->dma_chan, NULL, 0, DMA_NONE, 0);
+        }
+
+        dma_async_device_unregister(&idmac->dma);
+}
+
+/*****************************************************************************
+ * IPU common probe / remove
+ */
+
+static int ipu_probe(struct platform_device *pdev)
+{
+        struct ipu_platform_data *pdata = pdev->dev.platform_data;
+        struct resource *mem_ipu, *mem_ic;
+        int ret;
+
+        spin_lock_init(&ipu_data.lock);
+
+        mem_ipu = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        mem_ic  = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+        if (!pdata || !mem_ipu || !mem_ic)
+                return -EINVAL;
+
+        ipu_data.dev = &pdev->dev;
+
+        platform_set_drvdata(pdev, &ipu_data);
+
+        ret = platform_get_irq(pdev, 0);
+        if (ret < 0)
+                goto err_noirq;
+
+        ipu_data.irq_fn = ret;
+        ret = platform_get_irq(pdev, 1);
+        if (ret < 0)
+                goto err_noirq;
+
+        ipu_data.irq_err = ret;
+        ipu_data.irq_base = pdata->irq_base;
+
+        dev_dbg(&pdev->dev, "fn irq %u, err irq %u, irq-base %u\n",
+                ipu_data.irq_fn, ipu_data.irq_err, ipu_data.irq_base);
+
+        /* Remap IPU common registers */
+        ipu_data.reg_ipu = ioremap(mem_ipu->start,
+                                   mem_ipu->end - mem_ipu->start + 1);
+        if (!ipu_data.reg_ipu) {
+                ret = -ENOMEM;
+                goto err_ioremap_ipu;
+        }
+
+        /* Remap Image Converter and Image DMA Controller registers */
+        ipu_data.reg_ic = ioremap(mem_ic->start,
+                                  mem_ic->end - mem_ic->start + 1);
+        if (!ipu_data.reg_ic) {
+                ret = -ENOMEM;
+                goto err_ioremap_ic;
+        }
+
+        /* Get IPU clock */
+        ipu_data.ipu_clk = clk_get(&pdev->dev, "ipu_clk");
+        if (IS_ERR(ipu_data.ipu_clk)) {
+                ret = PTR_ERR(ipu_data.ipu_clk);
+                goto err_clk_get;
+        }
+
+        /* Make sure IPU HSP clock is running */
+        clk_enable(ipu_data.ipu_clk);
+
+        /* Disable all interrupts */
+        idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_1);
+        idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_2);
+        idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_3);
+        idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_4);
+        idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_5);
+
+        dev_dbg(&pdev->dev, "%s @ 0x%08lx, fn irq %u, err irq %u\n", pdev->name,
+                (unsigned long)mem_ipu->start, ipu_data.irq_fn, ipu_data.irq_err);
+
+        ret = ipu_irq_attach_irq(&ipu_data, pdev);
+        if (ret < 0)
+                goto err_attach_irq;
+
+        /* Initialize DMA engine */
+        ret = ipu_idmac_init(&ipu_data);
+        if (ret < 0)
+                goto err_idmac_init;
+
+        tasklet_init(&ipu_data.tasklet, ipu_gc_tasklet, (unsigned long)&ipu_data);
+
+        ipu_data.dev = &pdev->dev;
+
+        dev_dbg(ipu_data.dev, "IPU initialized\n");
+
+        return 0;
+
+err_idmac_init:
+err_attach_irq:
+        ipu_irq_detach_irq(&ipu_data, pdev);
+        clk_disable(ipu_data.ipu_clk);
+        clk_put(ipu_data.ipu_clk);
+err_clk_get:
+        iounmap(ipu_data.reg_ic);
+err_ioremap_ic:
+        iounmap(ipu_data.reg_ipu);
+err_ioremap_ipu:
+err_noirq:
+        dev_err(&pdev->dev, "Failed to probe IPU: %d\n", ret);
+        return ret;
+}
+
+static int ipu_remove(struct platform_device *pdev)
+{
+        struct ipu *ipu = platform_get_drvdata(pdev);
+
+        ipu_idmac_exit(ipu);
+        ipu_irq_detach_irq(ipu, pdev);
+        clk_disable(ipu->ipu_clk);
+        clk_put(ipu->ipu_clk);
+        iounmap(ipu->reg_ic);
+        iounmap(ipu->reg_ipu);
+        tasklet_kill(&ipu->tasklet);
+        platform_set_drvdata(pdev, NULL);
+
+        return 0;
+}
+
+/*
+ * We need two MEM resources - with IPU-common and Image Converter registers,
+ * including PF_CONF and IDMAC_* registers, and two IRQs - function and error
+ */
+static struct platform_driver ipu_platform_driver = {
+        .driver = {
+                .name   = "ipu-core",
+                .owner  = THIS_MODULE,
+        },
+        .remove         = ipu_remove,
+};
+
+static int __init ipu_init(void)
+{
+        return platform_driver_probe(&ipu_platform_driver, ipu_probe);
+}
+subsys_initcall(ipu_init);
+
+MODULE_DESCRIPTION("IPU core driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>");
+MODULE_ALIAS("platform:ipu-core");
diff --git a/drivers/dma/ipu/ipu_intern.h b/drivers/dma/ipu/ipu_intern.h
new file mode 100644
index 000000000000..545cf11a94ab
--- /dev/null
+++ b/drivers/dma/ipu/ipu_intern.h
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IPU_INTERN_H_
+#define _IPU_INTERN_H_
+
+#include <linux/dmaengine.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+
+/* IPU Common registers */
+#define IPU_CONF                0x00
+#define IPU_CHA_BUF0_RDY        0x04
+#define IPU_CHA_BUF1_RDY        0x08
+#define IPU_CHA_DB_MODE_SEL     0x0C
+#define IPU_CHA_CUR_BUF         0x10
+#define IPU_FS_PROC_FLOW        0x14
+#define IPU_FS_DISP_FLOW        0x18
+#define IPU_TASKS_STAT          0x1C
+#define IPU_IMA_ADDR            0x20
+#define IPU_IMA_DATA            0x24
+#define IPU_INT_CTRL_1          0x28
+#define IPU_INT_CTRL_2          0x2C
+#define IPU_INT_CTRL_3          0x30
+#define IPU_INT_CTRL_4          0x34
+#define IPU_INT_CTRL_5          0x38
+#define IPU_INT_STAT_1          0x3C
+#define IPU_INT_STAT_2          0x40
+#define IPU_INT_STAT_3          0x44
+#define IPU_INT_STAT_4          0x48
+#define IPU_INT_STAT_5          0x4C
+#define IPU_BRK_CTRL_1          0x50
+#define IPU_BRK_CTRL_2          0x54
+#define IPU_BRK_STAT            0x58
+#define IPU_DIAGB_CTRL          0x5C
+
+/* IPU_CONF Register bits */
+#define IPU_CONF_CSI_EN         0x00000001
+#define IPU_CONF_IC_EN          0x00000002
+#define IPU_CONF_ROT_EN         0x00000004
+#define IPU_CONF_PF_EN          0x00000008
+#define IPU_CONF_SDC_EN         0x00000010
+#define IPU_CONF_ADC_EN         0x00000020
+#define IPU_CONF_DI_EN          0x00000040
+#define IPU_CONF_DU_EN          0x00000080
+#define IPU_CONF_PXL_ENDIAN     0x00000100
+
+/* Image Converter Registers */
+#define IC_CONF                 0x88
+#define IC_PRP_ENC_RSC          0x8C
+#define IC_PRP_VF_RSC           0x90
+#define IC_PP_RSC               0x94
+#define IC_CMBP_1               0x98
+#define IC_CMBP_2               0x9C
+#define PF_CONF                 0xA0
+#define IDMAC_CONF              0xA4
+#define IDMAC_CHA_EN            0xA8
+#define IDMAC_CHA_PRI           0xAC
+#define IDMAC_CHA_BUSY          0xB0
+
+/* Image Converter Register bits */
+#define IC_CONF_PRPENC_EN       0x00000001
+#define IC_CONF_PRPENC_CSC1     0x00000002
+#define IC_CONF_PRPENC_ROT_EN   0x00000004
+#define IC_CONF_PRPVF_EN        0x00000100
+#define IC_CONF_PRPVF_CSC1      0x00000200
+#define IC_CONF_PRPVF_CSC2      0x00000400
+#define IC_CONF_PRPVF_CMB       0x00000800
+#define IC_CONF_PRPVF_ROT_EN    0x00001000
+#define IC_CONF_PP_EN           0x00010000
+#define IC_CONF_PP_CSC1         0x00020000
+#define IC_CONF_PP_CSC2         0x00040000
+#define IC_CONF_PP_CMB          0x00080000
+#define IC_CONF_PP_ROT_EN       0x00100000
+#define IC_CONF_IC_GLB_LOC_A    0x10000000
+#define IC_CONF_KEY_COLOR_EN    0x20000000
+#define IC_CONF_RWS_EN          0x40000000
+#define IC_CONF_CSI_MEM_WR_EN   0x80000000
+
+#define IDMA_CHAN_INVALID       0x000000FF
+#define IDMA_IC_0               0x00000001
+#define IDMA_IC_1               0x00000002
+#define IDMA_IC_2               0x00000004
+#define IDMA_IC_3               0x00000008
+#define IDMA_IC_4               0x00000010
+#define IDMA_IC_5               0x00000020
+#define IDMA_IC_6               0x00000040
+#define IDMA_IC_7               0x00000080
+#define IDMA_IC_8               0x00000100
+#define IDMA_IC_9               0x00000200
+#define IDMA_IC_10              0x00000400
+#define IDMA_IC_11              0x00000800
+#define IDMA_IC_12              0x00001000
+#define IDMA_IC_13              0x00002000
+#define IDMA_SDC_BG             0x00004000
+#define IDMA_SDC_FG             0x00008000
+#define IDMA_SDC_MASK           0x00010000
+#define IDMA_SDC_PARTIAL        0x00020000
+#define IDMA_ADC_SYS1_WR        0x00040000
+#define IDMA_ADC_SYS2_WR        0x00080000
+#define IDMA_ADC_SYS1_CMD       0x00100000
+#define IDMA_ADC_SYS2_CMD       0x00200000
+#define IDMA_ADC_SYS1_RD        0x00400000
+#define IDMA_ADC_SYS2_RD        0x00800000
+#define IDMA_PF_QP              0x01000000
+#define IDMA_PF_BSP             0x02000000
+#define IDMA_PF_Y_IN            0x04000000
+#define IDMA_PF_U_IN            0x08000000
+#define IDMA_PF_V_IN            0x10000000
+#define IDMA_PF_Y_OUT           0x20000000
+#define IDMA_PF_U_OUT           0x40000000
+#define IDMA_PF_V_OUT           0x80000000
+
+#define TSTAT_PF_H264_PAUSE     0x00000001
+#define TSTAT_CSI2MEM_MASK      0x0000000C
+#define TSTAT_CSI2MEM_OFFSET    2
+#define TSTAT_VF_MASK           0x00000600
+#define TSTAT_VF_OFFSET         9
+#define TSTAT_VF_ROT_MASK       0x000C0000
+#define TSTAT_VF_ROT_OFFSET     18
+#define TSTAT_ENC_MASK          0x00000180
+#define TSTAT_ENC_OFFSET        7
+#define TSTAT_ENC_ROT_MASK      0x00030000
+#define TSTAT_ENC_ROT_OFFSET    16
+#define TSTAT_PP_MASK           0x00001800
+#define TSTAT_PP_OFFSET         11
+#define TSTAT_PP_ROT_MASK       0x00300000
+#define TSTAT_PP_ROT_OFFSET     20
+#define TSTAT_PF_MASK           0x00C00000
+#define TSTAT_PF_OFFSET         22
+#define TSTAT_ADCSYS1_MASK      0x03000000
+#define TSTAT_ADCSYS1_OFFSET    24
+#define TSTAT_ADCSYS2_MASK      0x0C000000
+#define TSTAT_ADCSYS2_OFFSET    26
+
+#define TASK_STAT_IDLE          0
+#define TASK_STAT_ACTIVE        1
+#define TASK_STAT_WAIT4READY    2
+
+struct idmac {
+        struct dma_device       dma;
+};
+
+struct ipu {
+        void __iomem            *reg_ipu;
+        void __iomem            *reg_ic;
+        unsigned int            irq_fn;         /* IPU Function IRQ to the CPU */
+        unsigned int            irq_err;        /* IPU Error IRQ to the CPU */
+        unsigned int            irq_base;       /* Beginning of the IPU IRQ range */
+        unsigned long           channel_init_mask;
+        spinlock_t              lock;
+        struct clk              *ipu_clk;
+        struct device           *dev;
+        struct idmac            idmac;
+        struct idmac_channel    channel[IPU_CHANNELS_NUM];
+        struct tasklet_struct   tasklet;
+};
+
+#define to_idmac(d) container_of(d, struct idmac, dma)
+
+extern int ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev);
+extern void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev);
+
+extern bool ipu_irq_status(uint32_t irq);
+extern int ipu_irq_map(unsigned int source);
+extern int ipu_irq_unmap(unsigned int source);
+
+#endif
diff --git a/drivers/dma/ipu/ipu_irq.c b/drivers/dma/ipu/ipu_irq.c
new file mode 100644
index 000000000000..83f532cc767f
--- /dev/null
+++ b/drivers/dma/ipu/ipu_irq.c
@@ -0,0 +1,413 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/ipu.h>
+
+#include "ipu_intern.h"
+
+/*
+ * Register read / write - shall be inlined by the compiler
+ */
+static u32 ipu_read_reg(struct ipu *ipu, unsigned long reg)
+{
+        return __raw_readl(ipu->reg_ipu + reg);
+}
+
+static void ipu_write_reg(struct ipu *ipu, u32 value, unsigned long reg)
+{
+        __raw_writel(value, ipu->reg_ipu + reg);
+}
+
+
+/*
+ * IPU IRQ chip driver
+ */
+
+#define IPU_IRQ_NR_FN_BANKS 3
+#define IPU_IRQ_NR_ERR_BANKS 2
+#define IPU_IRQ_NR_BANKS (IPU_IRQ_NR_FN_BANKS + IPU_IRQ_NR_ERR_BANKS)
+
+struct ipu_irq_bank {
+        unsigned int    control;
+        unsigned int    status;
+        spinlock_t      lock;
+        struct ipu      *ipu;
+};
+
+static struct ipu_irq_bank irq_bank[IPU_IRQ_NR_BANKS] = {
+        /* 3 groups of functional interrupts */
+        {
+                .control        = IPU_INT_CTRL_1,
+                .status         = IPU_INT_STAT_1,
+        }, {
+                .control        = IPU_INT_CTRL_2,
+                .status         = IPU_INT_STAT_2,
+        }, {
+                .control        = IPU_INT_CTRL_3,
+                .status         = IPU_INT_STAT_3,
+        },
+        /* 2 groups of error interrupts */
+        {
+                .control        = IPU_INT_CTRL_4,
+                .status         = IPU_INT_STAT_4,
+        }, {
+                .control        = IPU_INT_CTRL_5,
+                .status         = IPU_INT_STAT_5,
+        },
+};
+
+struct ipu_irq_map {
+        unsigned int            irq;
+        int                     source;
+        struct ipu_irq_bank     *bank;
+        struct ipu              *ipu;
+};
+
+static struct ipu_irq_map irq_map[CONFIG_MX3_IPU_IRQS];
+/* Protects allocations from the above array of maps */
+static DEFINE_MUTEX(map_lock);
+/* Protects register accesses and individual mappings */
+static DEFINE_SPINLOCK(bank_lock);
+
+static struct ipu_irq_map *src2map(unsigned int src)
+{
+        int i;
+
+        for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++)
+                if (irq_map[i].source == src)
+                        return irq_map + i;
+
+        return NULL;
+}
+
+static void ipu_irq_unmask(unsigned int irq)
+{
+        struct ipu_irq_map *map = get_irq_chip_data(irq);
+        struct ipu_irq_bank *bank;
+        uint32_t reg;
+        unsigned long lock_flags;
+
+        spin_lock_irqsave(&bank_lock, lock_flags);
+
+        bank = map->bank;
+        if (!bank) {
+                spin_unlock_irqrestore(&bank_lock, lock_flags);
+                pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq);
+                return;
+        }
+
+        reg = ipu_read_reg(bank->ipu, bank->control);
+        reg |= (1UL << (map->source & 31));
+        ipu_write_reg(bank->ipu, reg, bank->control);
+
+        spin_unlock_irqrestore(&bank_lock, lock_flags);
+}
+
+static void ipu_irq_mask(unsigned int irq)
+{
+        struct ipu_irq_map *map = get_irq_chip_data(irq);
+        struct ipu_irq_bank *bank;
+        uint32_t reg;
+        unsigned long lock_flags;
+
+        spin_lock_irqsave(&bank_lock, lock_flags);
+
+        bank = map->bank;
+        if (!bank) {
+                spin_unlock_irqrestore(&bank_lock, lock_flags);
+                pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq);
+                return;
+        }
+
+        reg = ipu_read_reg(bank->ipu, bank->control);
+        reg &= ~(1UL << (map->source & 31));
+        ipu_write_reg(bank->ipu, reg, bank->control);
+
+        spin_unlock_irqrestore(&bank_lock, lock_flags);
+}
+
+static void ipu_irq_ack(unsigned int irq)
+{
+        struct ipu_irq_map *map = get_irq_chip_data(irq);
+        struct ipu_irq_bank *bank;
+        unsigned long lock_flags;
+
+        spin_lock_irqsave(&bank_lock, lock_flags);
+
+        bank = map->bank;
+        if (!bank) {
+                spin_unlock_irqrestore(&bank_lock, lock_flags);
+                pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq);
+                return;
+        }
+
+        ipu_write_reg(bank->ipu, 1UL << (map->source & 31), bank->status);
+        spin_unlock_irqrestore(&bank_lock, lock_flags);
+}
+
+/**
+ * ipu_irq_status() - returns the current interrupt status of the specified IRQ.
+ * @irq:        interrupt line to get status for.
+ * @return:     true if the interrupt is pending/asserted or false if the
+ *              interrupt is not pending.
+ */
+bool ipu_irq_status(unsigned int irq)
+{
+        struct ipu_irq_map *map = get_irq_chip_data(irq);
+        struct ipu_irq_bank *bank;
+        unsigned long lock_flags;
+        bool ret;
+
+        spin_lock_irqsave(&bank_lock, lock_flags);
+        bank = map->bank;
+        ret = bank && ipu_read_reg(bank->ipu, bank->status) &
+                (1UL << (map->source & 31));
+        spin_unlock_irqrestore(&bank_lock, lock_flags);
+
+        return ret;
+}
+
+/**
+ * ipu_irq_map() - map an IPU interrupt source to an IRQ number
+ * @source:     interrupt source bit position (see below)
+ * @return:     mapped IRQ number or negative error code
+ *
+ * The source parameter has to be explained further. On i.MX31 IPU has 137 IRQ
+ * sources, they are broken down in 5 32-bit registers, like 32, 32, 24, 32, 17.
+ * However, the source argument of this function is not the sequence number of
+ * the possible IRQ, but rather its bit position. So, first interrupt in fourth
+ * register has source number 96, and not 88. This makes calculations easier,
+ * and also provides forward compatibility with any future IPU implementations
+ * with any interrupt bit assignments.
+ */
+int ipu_irq_map(unsigned int source)
+{
+        int i, ret = -ENOMEM;
+        struct ipu_irq_map *map;
+
+        might_sleep();
+
+        mutex_lock(&map_lock);
+        map = src2map(source);
+        if (map) {
+                pr_err("IPU: Source %u already mapped to IRQ %u\n", source, map->irq);
+                ret = -EBUSY;
+                goto out;
+        }
+
+        for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) {
+                if (irq_map[i].source < 0) {
+                        unsigned long lock_flags;
+
+                        spin_lock_irqsave(&bank_lock, lock_flags);
+                        irq_map[i].source = source;
+                        irq_map[i].bank = irq_bank + source / 32;
+                        spin_unlock_irqrestore(&bank_lock, lock_flags);
+
+                        ret = irq_map[i].irq;
+                        pr_debug("IPU: mapped source %u to IRQ %u\n",
+                                 source, ret);
+                        break;
+                }
+        }
+out:
+        mutex_unlock(&map_lock);
+
+        if (ret < 0)
+                pr_err("IPU: couldn't map source %u: %d\n", source, ret);
+
+        return ret;
+}
+
+/**
+ * ipu_irq_map() - map an IPU interrupt source to an IRQ number
+ * @source:     interrupt source bit position (see ipu_irq_map())
+ * @return:     0 or negative error code
+ */
+int ipu_irq_unmap(unsigned int source)
+{
+        int i, ret = -EINVAL;
+
+        might_sleep();
+
+        mutex_lock(&map_lock);
+        for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) {
+                if (irq_map[i].source == source) {
+                        unsigned long lock_flags;
+
+                        pr_debug("IPU: unmapped source %u from IRQ %u\n",
+                                 source, irq_map[i].irq);
+
+                        spin_lock_irqsave(&bank_lock, lock_flags);
+                        irq_map[i].source = -EINVAL;
+                        irq_map[i].bank = NULL;
+                        spin_unlock_irqrestore(&bank_lock, lock_flags);
+
+                        ret = 0;
+                        break;
+                }
+        }
+        mutex_unlock(&map_lock);
+
+        return ret;
+}
+
+/* Chained IRQ handler for IPU error interrupt */
+static void ipu_irq_err(unsigned int irq, struct irq_desc *desc)
+{
+        struct ipu *ipu = get_irq_data(irq);
+        u32 status;
+        int i, line;
+
+        for (i = IPU_IRQ_NR_FN_BANKS; i < IPU_IRQ_NR_BANKS; i++) {
+                struct ipu_irq_bank *bank = irq_bank + i;
+
+                spin_lock(&bank_lock);
+                status = ipu_read_reg(ipu, bank->status);
+                /*
+                 * Don't think we have to clear all interrupts here, they will
+                 * be acked by ->handle_irq() (handle_level_irq). However, we
+                 * might want to clear unhandled interrupts after the loop...
+                 */
+                status &= ipu_read_reg(ipu, bank->control);
+                spin_unlock(&bank_lock);
+                while ((line = ffs(status))) {
+                        struct ipu_irq_map *map;
+
+                        line--;
+                        status &= ~(1UL << line);
+
+                        spin_lock(&bank_lock);
+                        map = src2map(32 * i + line);
+                        if (map)
+                                irq = map->irq;
+                        spin_unlock(&bank_lock);
+
+                        if (!map) {
+                                pr_err("IPU: Interrupt on unmapped source %u bank %d\n",
+                                       line, i);
+                                continue;
+                        }
+                        generic_handle_irq(irq);
+                }
+        }
+}
+
+/* Chained IRQ handler for IPU function interrupt */
+static void ipu_irq_fn(unsigned int irq, struct irq_desc *desc)
+{
+        struct ipu *ipu = get_irq_data(irq);
+        u32 status;
+        int i, line;
+
+        for (i = 0; i < IPU_IRQ_NR_FN_BANKS; i++) {
+                struct ipu_irq_bank *bank = irq_bank + i;
+
+                spin_lock(&bank_lock);
+                status = ipu_read_reg(ipu, bank->status);
+                /* Not clearing all interrupts, see above */
+                status &= ipu_read_reg(ipu, bank->control);
+                spin_unlock(&bank_lock);
+                while ((line = ffs(status))) {
+                        struct ipu_irq_map *map;
+
+                        line--;
+                        status &= ~(1UL << line);
+
+                        spin_lock(&bank_lock);
+                        map = src2map(32 * i + line);
+                        if (map)
+                                irq = map->irq;
+                        spin_unlock(&bank_lock);
+
+                        if (!map) {
+                                pr_err("IPU: Interrupt on unmapped source %u bank %d\n",
+                                       line, i);
+                                continue;
+                        }
+                        generic_handle_irq(irq);
+                }
+        }
+}
+
+static struct irq_chip ipu_irq_chip = {
+        .name   = "ipu_irq",
+        .ack    = ipu_irq_ack,
+        .mask   = ipu_irq_mask,
+        .unmask = ipu_irq_unmask,
+};
+
+/* Install the IRQ handler */
+int ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev)
+{
+        struct ipu_platform_data *pdata = dev->dev.platform_data;
+        unsigned int irq, irq_base, i;
+
+        irq_base = pdata->irq_base;
+
+        for (i = 0; i < IPU_IRQ_NR_BANKS; i++)
+                irq_bank[i].ipu = ipu;
+
+        for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) {
+                int ret;
+
+                irq = irq_base + i;
+                ret = set_irq_chip(irq, &ipu_irq_chip);
+                if (ret < 0)
+                        return ret;
+                ret = set_irq_chip_data(irq, irq_map + i);
+                if (ret < 0)
+                        return ret;
+                irq_map[i].ipu = ipu;
+                irq_map[i].irq = irq;
+                irq_map[i].source = -EINVAL;
+                set_irq_handler(irq, handle_level_irq);
+#ifdef CONFIG_ARM
+                set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+#endif
+        }
+
+        set_irq_data(ipu->irq_fn, ipu);
+        set_irq_chained_handler(ipu->irq_fn, ipu_irq_fn);
+
+        set_irq_data(ipu->irq_err, ipu);
+        set_irq_chained_handler(ipu->irq_err, ipu_irq_err);
+
+        return 0;
+}
+
+void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev)
+{
+        struct ipu_platform_data *pdata = dev->dev.platform_data;
+        unsigned int irq, irq_base;
+
+        irq_base = pdata->irq_base;
+
+        set_irq_chained_handler(ipu->irq_fn, NULL);
+        set_irq_data(ipu->irq_fn, NULL);
+
+        set_irq_chained_handler(ipu->irq_err, NULL);
+        set_irq_data(ipu->irq_err, NULL);
+
+        for (irq = irq_base; irq < irq_base + CONFIG_MX3_IPU_IRQS; irq++) {
+#ifdef CONFIG_ARM
+                set_irq_flags(irq, 0);
+#endif
+                set_irq_chip(irq, NULL);
+                set_irq_chip_data(irq, NULL);
+        }
+}
diff --git a/drivers/gpu/drm/drm_agpsupport.c b/drivers/gpu/drm/drm_agpsupport.c
index 3d33b8252b58..14796594e5d9 100644
--- a/drivers/gpu/drm/drm_agpsupport.c
+++ b/drivers/gpu/drm/drm_agpsupport.c
@@ -33,10 +33,11 @@
 
 #include "drmP.h"
 #include <linux/module.h>
-#include <asm/agp.h>
 
 #if __OS_HAS_AGP
 
+#include <asm/agp.h>
+
 /**
  * Get AGP information.
  *
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 5b2cbb778162..bfce0992fefb 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -194,7 +194,6 @@ char *drm_get_connector_status_name(enum drm_connector_status status)
  * @type: object type
  *
  * LOCKING:
- * Caller must hold DRM mode_config lock.
  *
  * Create a unique identifier based on @ptr in @dev's identifier space.  Used
  * for tracking modes, CRTCs and connectors.
@@ -209,15 +208,15 @@ static int drm_mode_object_get(struct drm_device *dev,
         int new_id = 0;
         int ret;
 
-        WARN(!mutex_is_locked(&dev->mode_config.mutex),
-             "%s called w/o mode_config lock\n", __func__);
 again:
         if (idr_pre_get(&dev->mode_config.crtc_idr, GFP_KERNEL) == 0) {
                 DRM_ERROR("Ran out memory getting a mode number\n");
                 return -EINVAL;
         }
 
+        mutex_lock(&dev->mode_config.idr_mutex);
         ret = idr_get_new_above(&dev->mode_config.crtc_idr, obj, 1, &new_id);
+        mutex_unlock(&dev->mode_config.idr_mutex);
         if (ret == -EAGAIN)
                 goto again;
 
@@ -239,16 +238,20 @@ again:
 static void drm_mode_object_put(struct drm_device *dev,
                                 struct drm_mode_object *object)
 {
+        mutex_lock(&dev->mode_config.idr_mutex);
         idr_remove(&dev->mode_config.crtc_idr, object->id);
+        mutex_unlock(&dev->mode_config.idr_mutex);
 }
 
 void *drm_mode_object_find(struct drm_device *dev, uint32_t id, uint32_t type)
 {
-        struct drm_mode_object *obj;
+        struct drm_mode_object *obj = NULL;
 
+        mutex_lock(&dev->mode_config.idr_mutex);
         obj = idr_find(&dev->mode_config.crtc_idr, id);
         if (!obj || (obj->type != type) || (obj->id != id))
-                return NULL;
+                obj = NULL;
+        mutex_unlock(&dev->mode_config.idr_mutex);
 
         return obj;
 }
@@ -786,6 +789,7 @@ EXPORT_SYMBOL(drm_mode_create_dithering_property);
 void drm_mode_config_init(struct drm_device *dev)
 {
         mutex_init(&dev->mode_config.mutex);
+        mutex_init(&dev->mode_config.idr_mutex);
         INIT_LIST_HEAD(&dev->mode_config.fb_list);
         INIT_LIST_HEAD(&dev->mode_config.fb_kernel_list);
         INIT_LIST_HEAD(&dev->mode_config.crtc_list);
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 5ff88d952226..14c7a23dc157 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -294,6 +294,7 @@ EXPORT_SYMBOL(drm_init);
  */
 static void drm_cleanup(struct drm_device * dev)
 {
+        struct drm_map_list *r_list, *list_temp;
         DRM_DEBUG("\n");
 
         if (!dev) {
@@ -325,6 +326,9 @@ static void drm_cleanup(struct drm_device * dev)
         drm_ht_remove(&dev->map_hash);
         drm_ctxbitmap_cleanup(dev);
 
+        list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head)
+                drm_rmmap(dev, r_list->map);
+
         if (drm_core_check_feature(dev, DRIVER_MODESET))
                 drm_put_minor(&dev->control);
 
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 0fbb0da342cb..5a4d3244758a 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -660,7 +660,7 @@ struct edid *drm_get_edid(struct drm_connector *connector,
 
         edid = (struct edid *)drm_ddc_read(adapter);
         if (!edid) {
-                dev_warn(&connector->dev->pdev->dev, "%s: no EDID data\n",
+                dev_info(&connector->dev->pdev->dev, "%s: no EDID data\n",
                          drm_get_connector_name(connector));
                 return NULL;
         }
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index 5ca132afa4f2..46bb923b097c 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -118,12 +118,20 @@ static void drm_master_destroy(struct kref *kref)
         struct drm_master *master = container_of(kref, struct drm_master, refcount);
         struct drm_magic_entry *pt, *next;
         struct drm_device *dev = master->minor->dev;
+        struct drm_map_list *r_list, *list_temp;
 
         list_del(&master->head);
 
         if (dev->driver->master_destroy)
                 dev->driver->master_destroy(dev, master);
 
+        list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head) {
+                if (r_list->master == master) {
+                        drm_rmmap_locked(dev, r_list->map);
+                        r_list = NULL;
+                }
+        }
+
         if (master->unique) {
                 drm_free(master->unique, master->unique_size, DRM_MEM_DRIVER);
                 master->unique = NULL;
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index bbadf1c04142..ee64b7301f67 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -944,13 +944,14 @@ static int i915_load_modeset_init(struct drm_device *dev)
         dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) &
                 0xff000000;
 
-        DRM_DEBUG("*** fb base 0x%08lx\n", dev->mode_config.fb_base);
-
-        if (IS_MOBILE(dev) || (IS_I9XX(dev) && !IS_I965G(dev) && !IS_G33(dev)))
+        if (IS_MOBILE(dev) || IS_I9XX(dev))
                 dev_priv->cursor_needs_physical = true;
         else
                 dev_priv->cursor_needs_physical = false;
 
+        if (IS_I965G(dev) || IS_G33(dev))
+                dev_priv->cursor_needs_physical = false;
+
         ret = i915_probe_agp(dev, &agp_size, &prealloc_size);
         if (ret)
                 goto kfree_devname;
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 96316fd47233..debad5c04cc0 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -3364,7 +3364,7 @@ void i915_gem_free_all_phys_object(struct drm_device *dev)
 {
         int i;
 
-        for (i = 0; i < I915_MAX_PHYS_OBJECT; i++)
+        for (i = I915_GEM_PHYS_CURSOR_0; i <= I915_MAX_PHYS_OBJECT; i++)
                 i915_gem_free_phys_object(dev, i);
 }
 
@@ -3427,7 +3427,7 @@ i915_gem_attach_phys_object(struct drm_device *dev,
                 ret = i915_gem_init_phys_object(dev, id,
                                                 obj->size);
                 if (ret) {
-                        DRM_ERROR("failed to init phys object %d size: %d\n", id, obj->size);
+                        DRM_ERROR("failed to init phys object %d size: %zu\n", id, obj->size);
                         goto out;
                 }
         }
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index a5a2f5339e9e..5ee9d4c25753 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -137,10 +137,6 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
         chan->reg = reg;
         snprintf(chan->adapter.name, I2C_NAME_SIZE, "intel drm %s", name);
         chan->adapter.owner = THIS_MODULE;
-#ifndef I2C_HW_B_INTELFB
-#define I2C_HW_B_INTELFB I2C_HW_B_I810
-#endif
-        chan->adapter.id = I2C_HW_B_INTELFB;
         chan->adapter.algo_data = &chan->algo;
         chan->adapter.dev.parent = &dev->pdev->dev;
         chan->algo.setsda = set_data;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 2fafdcc108fe..6b1148fc2cbe 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -340,6 +340,18 @@ static void intel_lvds_destroy(struct drm_connector *connector)
         kfree(connector);
 }
 
+static int intel_lvds_set_property(struct drm_connector *connector,
+                                   struct drm_property *property,
+                                   uint64_t value)
+{
+        struct drm_device *dev = connector->dev;
+
+        if (property == dev->mode_config.dpms_property && connector->encoder)
+                intel_lvds_dpms(connector->encoder, (uint32_t)(value & 0xf));
+
+        return 0;
+}
+
 static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
         .dpms = intel_lvds_dpms,
         .mode_fixup = intel_lvds_mode_fixup,
@@ -359,6 +371,7 @@ static const struct drm_connector_funcs intel_lvds_connector_funcs = {
         .restore = intel_lvds_restore,
         .detect = intel_lvds_detect,
         .fill_modes = drm_helper_probe_single_connector_modes,
+        .set_property = intel_lvds_set_property,
         .destroy = intel_lvds_destroy,
 };
 
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 75089febbc13..9fee3ca17344 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -83,7 +83,6 @@ static struct i2c_algo_bit_data ioc_data = {
 };
 
 static struct i2c_adapter ioc_ops = {
-        .id                     = I2C_HW_B_IOC,
         .algo_data              = &ioc_data,
 };
 
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 9cead9b9458e..981e080b32ae 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -476,7 +476,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter ali1535_adapter = {
         .owner          = THIS_MODULE,
-        .id             = I2C_HW_SMBUS_ALI1535,
         .class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
         .algo           = &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index dd9e796fad69..f70f46582c6c 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -386,7 +386,6 @@ static const struct i2c_algorithm ali1563_algorithm = {
 
 static struct i2c_adapter ali1563_adapter = {
         .owner  = THIS_MODULE,
-        .id     = I2C_HW_SMBUS_ALI1563,
         .class  = I2C_CLASS_HWMON | I2C_CLASS_SPD,
         .algo   = &ali1563_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 234fdde7d40e..39066dee46e3 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -473,7 +473,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter ali15x3_adapter = {
         .owner          = THIS_MODULE,
-        .id             = I2C_HW_SMBUS_ALI15X3,
         .class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
         .algo           = &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 36bee5b9c952..220f4a1eee1d 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -298,7 +298,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 struct i2c_adapter amd756_smbus = {
         .owner          = THIS_MODULE,
-        .id             = I2C_HW_SMBUS_AMD756,
         .class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
         .algo           = &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index 3972208876b3..edab51973bf5 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -387,7 +387,6 @@ static int __devinit amd8111_probe(struct pci_dev *dev,
         smbus->adapter.owner = THIS_MODULE;
         snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
                 "SMBus2 AMD8111 adapter at %04x", smbus->base);
-        smbus->adapter.id = I2C_HW_SMBUS_AMD8111;
         smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
         smbus->adapter.algo = &smbus_algorithm;
         smbus->adapter.algo_data = smbus;
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index 66a04c2c660f..f78ce523e3db 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -400,7 +400,6 @@ i2c_au1550_probe(struct platform_device *pdev)
         priv->xfer_timeout = 200;
         priv->ack_timeout = 200;
 
-        priv->adap.id = I2C_HW_AU1550_PSC;
         priv->adap.nr = pdev->id;
         priv->adap.algo = &au1550_algo;
         priv->adap.algo_data = priv;
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 3fd2c417c1e0..fc548b3d002e 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -651,7 +651,6 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
         iface->timeout_timer.data = (unsigned long)iface;
 
         p_adap = &iface->adap;
-        p_adap->id = I2C_HW_BLACKFIN;
         p_adap->nr = pdev->id;
         strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
         p_adap->algo = &bfin_twi_algorithm;
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 0ed3ccb81b63..448b4bf35eb7 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -202,7 +202,6 @@ static struct i2c_algo_pcf_data pcf_isa_data = {
 static struct i2c_adapter pcf_isa_ops = {
         .owner          = THIS_MODULE,
         .class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
-        .id             = I2C_HW_P_ELEK,
         .algo_data      = &pcf_isa_data,
         .name           = "i2c-elektor",
 };
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index 648aa7baff83..bec9b845dd16 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -102,7 +102,6 @@ static struct i2c_algo_bit_data hydra_bit_data = {
 static struct i2c_adapter hydra_adap = {
         .owner          = THIS_MODULE,
         .name           = "Hydra i2c",
-        .id             = I2C_HW_B_HYDRA,
         .algo_data      = &hydra_bit_data,
 };
 
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 526625eaa84b..230238df56c4 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -556,7 +556,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter i801_adapter = {
         .owner          = THIS_MODULE,
-        .id             = I2C_HW_SMBUS_I801,
         .class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
         .algo           = &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 651f2f1ae5b7..88f0db73b364 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -746,7 +746,6 @@ static int __devinit iic_probe(struct of_device *ofdev,
         adap->dev.parent = &ofdev->dev;
         strlcpy(adap->name, "IBM IIC", sizeof(adap->name));
         i2c_set_adapdata(adap, dev);
-        adap->id = I2C_HW_OCP;
         adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
         adap->algo = &iic_algo;
         adap->timeout = 1;
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index fc2714ac0c0f..3190690c26ce 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -480,7 +480,6 @@ iop3xx_i2c_probe(struct platform_device *pdev)
         }
 
         memcpy(new_adapter->name, pdev->name, strlen(pdev->name));
-        new_adapter->id = I2C_HW_IOP3XX;
         new_adapter->owner = THIS_MODULE;
         new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
         new_adapter->dev.parent = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 05d72e981353..8e8467970481 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -116,7 +116,6 @@ static int ixp2000_i2c_probe(struct platform_device *plat_dev)
         drv_data->algo_data.udelay = 6;
         drv_data->algo_data.timeout = 100;
 
-        drv_data->adapter.id = I2C_HW_B_IXP2000,
         strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
                 sizeof(drv_data->adapter.name));
         drv_data->adapter.algo_data = &drv_data->algo_data,
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index a9a45fcc8544..aedbbe6618db 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -310,7 +310,6 @@ static const struct i2c_algorithm mpc_algo = {
 static struct i2c_adapter mpc_ops = {
         .owner = THIS_MODULE,
         .name = "MPC adapter",
-        .id = I2C_HW_MPC107,
         .algo = &mpc_algo,
         .timeout = 1,
 };
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 9e8118d2fe64..eeda276f8f16 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -527,7 +527,6 @@ mv64xxx_i2c_probe(struct platform_device *pd)
                 goto exit_unmap_regs;
         }
         drv_data->adapter.dev.parent = &pd->dev;
-        drv_data->adapter.id = I2C_HW_MV64XXX;
         drv_data->adapter.algo = &mv64xxx_i2c_algo;
         drv_data->adapter.owner = THIS_MODULE;
         drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 3b19bc41a60b..05af6cd7f270 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -355,7 +355,6 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar,
                 return -EBUSY;
         }
         smbus->adapter.owner = THIS_MODULE;
-        smbus->adapter.id = I2C_HW_SMBUS_NFORCE2;
         smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
         smbus->adapter.algo = &smbus_algorithm;
         smbus->adapter.algo_data = smbus;
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index b2b8380f6602..322c5691e38e 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -115,7 +115,6 @@ static struct i2c_algo_bit_data parport_algo_data = {
 static struct i2c_adapter parport_adapter = {
         .owner          = THIS_MODULE,
         .class          = I2C_CLASS_HWMON,
-        .id             = I2C_HW_B_LP,
         .algo_data      = &parport_algo_data,
         .name           = "Parallel port adapter (light)",
 };
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index a257cd5cd134..0d8998610c74 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -164,7 +164,6 @@ static void i2c_parport_attach (struct parport *port)
         /* Fill the rest of the structure */
         adapter->adapter.owner = THIS_MODULE;
         adapter->adapter.class = I2C_CLASS_HWMON;
-        adapter->adapter.id = I2C_HW_B_LP;
         strlcpy(adapter->adapter.name, "Parallel port adapter",
                 sizeof(adapter->adapter.name));
         adapter->algo_data = parport_algo_data;
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 9eb76268ec78..4aa8138cb0a9 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -101,7 +101,6 @@ static struct i2c_algo_pca_data pca_isa_data = {
 
 static struct i2c_adapter pca_isa_ops = {
         .owner          = THIS_MODULE,
-        .id             = I2C_HW_A_ISA,
         .algo_data      = &pca_isa_data,
         .name           = "PCA9564 ISA Adapter",
         .timeout        = 100,
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index eaa9b387543e..761f9dd53620 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -403,7 +403,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter piix4_adapter = {
         .owner          = THIS_MODULE,
-        .id             = I2C_HW_SMBUS_PIIX4,
         .class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
         .algo           = &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 4ddefbf238e9..98b1ec489159 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -155,7 +155,6 @@ static struct i2c_algo_sibyte_data sibyte_board_data[2] = {
 static struct i2c_adapter sibyte_board_adapter[2] = {
         {
                 .owner          = THIS_MODULE,
-                .id             = I2C_HW_SIBYTE,
                 .class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
                 .algo           = NULL,
                 .algo_data      = &sibyte_board_data[0],
@@ -164,7 +163,6 @@ static struct i2c_adapter sibyte_board_adapter[2] = {
         },
         {
                 .owner          = THIS_MODULE,
-                .id             = I2C_HW_SIBYTE,
                 .class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
                 .algo           = NULL,
                 .algo_data      = &sibyte_board_data[1],
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 8ce2daff985c..f320ab27da46 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -365,7 +365,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter sis5595_adapter = {
         .owner          = THIS_MODULE,
-        .id             = I2C_HW_SMBUS_SIS5595,
         .class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
         .algo           = &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 9c9c016ff2b5..50c3610e6028 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -464,7 +464,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter sis630_adapter = {
         .owner          = THIS_MODULE,
-        .id             = I2C_HW_SMBUS_SIS630,
         .class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
         .algo           = &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index f1bba6396641..7e1594b40579 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -241,7 +241,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter sis96x_adapter = {
         .owner          = THIS_MODULE,
-        .id             = I2C_HW_SMBUS_SIS96X,
         .class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
         .algo           = &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index 29cef0433f34..8b24f192103a 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -83,7 +83,6 @@ static struct i2c_algo_bit_data bit_data = {
 
 static struct i2c_adapter vt586b_adapter = {
         .owner          = THIS_MODULE,
-        .id             = I2C_HW_B_VIA,
         .class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
         .name           = "VIA i2c",
         .algo_data      = &bit_data,
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 9f194d9efd91..02e6f724b05f 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -321,7 +321,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter vt596_adapter = {
         .owner          = THIS_MODULE,
-        .id             = I2C_HW_SMBUS_VIA2,
         .class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
         .algo           = &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
index 1d4ae26ba73d..1a474acc0ddd 100644
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ b/drivers/i2c/busses/i2c-voodoo3.c
@@ -163,7 +163,6 @@ static struct i2c_algo_bit_data voo_i2c_bit_data = {
 
 static struct i2c_adapter voodoo3_i2c_adapter = {
         .owner          = THIS_MODULE,
-        .id             = I2C_HW_B_VOO,
         .class          = I2C_CLASS_TV_ANALOG, 
         .name           = "I2C Voodoo3/Banshee adapter",
         .algo_data      = &voo_i2c_bit_data,
@@ -180,7 +179,6 @@ static struct i2c_algo_bit_data voo_ddc_bit_data = {
 
 static struct i2c_adapter voodoo3_ddc_adapter = {
         .owner          = THIS_MODULE,
-        .id             = I2C_HW_B_VOO,
         .class          = I2C_CLASS_DDC, 
         .name           = "DDC Voodoo3/Banshee adapter",
         .algo_data      = &voo_ddc_bit_data,
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index ed794b145a11..648ecc6f60e6 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -440,7 +440,6 @@ static __init struct scx200_acb_iface *scx200_create_iface(const char *text,
         i2c_set_adapdata(adapter, iface);
         snprintf(adapter->name, sizeof(adapter->name), "%s ACB%d", text, index);
         adapter->owner = THIS_MODULE;
-        adapter->id = I2C_HW_SMBUS_SCX200;
         adapter->algo = &scx200_acb_algorithm;
         adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
         adapter->dev.parent = dev;
diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
index e4c98539c517..162b74a04886 100644
--- a/drivers/i2c/busses/scx200_i2c.c
+++ b/drivers/i2c/busses/scx200_i2c.c
@@ -82,7 +82,6 @@ static struct i2c_algo_bit_data scx200_i2c_data = {
 static struct i2c_adapter scx200_i2c_ops = {
         .owner             = THIS_MODULE,
         .class             = I2C_CLASS_HWMON | I2C_CLASS_SPD,
-        .id                = I2C_HW_B_SCX200,
         .algo_data         = &scx200_i2c_data,
         .name   = "NatSemi SCx200 I2C",
 };
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index b9bef04b7be4..c80312c1f382 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -16,43 +16,6 @@ config DS1682
           This driver can also be built as a module.  If so, the module
           will be called ds1682.
 
-config AT24
-        tristate "EEPROMs from most vendors"
-        depends on SYSFS && EXPERIMENTAL
-        help
-          Enable this driver to get read/write support to most I2C EEPROMs,
-          after you configure the driver to know about each EEPROM on
-          your target board.  Use these generic chip names, instead of
-          vendor-specific ones like at24c64 or 24lc02:
-
-             24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
-             24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
-
-          Unless you like data loss puzzles, always be sure that any chip
-          you configure as a 24c32 (32 kbit) or larger is NOT really a
-          24c16 (16 kbit) or smaller, and vice versa. Marking the chip
-          as read-only won't help recover from this. Also, if your chip
-          has any software write-protect mechanism you may want to review the
-          code to make sure this driver won't turn it on by accident.
-
-          If you use this with an SMBus adapter instead of an I2C adapter,
-          full functionality is not available.  Only smaller devices are
-          supported (24c16 and below, max 4 kByte).
-
-          This driver can also be built as a module.  If so, the module
-          will be called at24.
-
-config SENSORS_EEPROM
-        tristate "EEPROM reader"
-        depends on EXPERIMENTAL
-        help
-          If you say yes here you get read-only access to the EEPROM data
-          available on modern memory DIMMs and Sony Vaio laptops.  Such
-          EEPROMs could theoretically be available on other devices as well.
-
-          This driver can also be built as a module.  If so, the module
-          will be called eeprom.
-
 config SENSORS_PCF8574
         tristate "Philips PCF8574 and PCF8574A (DEPRECATED)"
         depends on EXPERIMENTAL && GPIO_PCF857X = "n"
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 00fcb5193ac2..d142f238a2de 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -11,8 +11,6 @@
 #
 
 obj-$(CONFIG_DS1682)            += ds1682.o
-obj-$(CONFIG_AT24)              += at24.o
-obj-$(CONFIG_SENSORS_EEPROM)    += eeprom.o
 obj-$(CONFIG_SENSORS_MAX6875)   += max6875.o
 obj-$(CONFIG_SENSORS_PCA9539)   += pca9539.o
 obj-$(CONFIG_SENSORS_PCF8574)   += pcf8574.o
diff --git a/drivers/ide/falconide.c b/drivers/ide/falconide.c
index a5ba820d69bb..a638e952d67a 100644
--- a/drivers/ide/falconide.c
+++ b/drivers/ide/falconide.c
@@ -82,7 +82,7 @@ static const struct ide_tp_ops falconide_tp_ops = {
 
 static const struct ide_port_info falconide_port_info = {
         .tp_ops                 = &falconide_tp_ops,
-        .host_flags             = IDE_HFLAG_NO_DMA,
+        .host_flags             = IDE_HFLAG_NO_DMA | IDE_HFLAG_SERIALIZE,
 };
 
 static void __init falconide_setup_ports(hw_regs_t *hw)
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 312127ea443a..0db1ed9f5fc2 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -649,7 +649,8 @@ static int ide_register_port(ide_hwif_t *hwif)
         /* register with global device tree */
         dev_set_name(&hwif->gendev, hwif->name);
         hwif->gendev.driver_data = hwif;
-        hwif->gendev.parent = hwif->dev;
+        if (hwif->gendev.parent == NULL)
+                hwif->gendev.parent = hwif->dev;
         hwif->gendev.release = hwif_release_dev;
 
         ret = device_register(&hwif->gendev);
diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
index a7ac490c9ae3..f38aac78044c 100644
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -346,7 +346,8 @@ static int __init palm_bk3710_probe(struct platform_device *pdev)
 {
         struct clk *clk;
         struct resource *mem, *irq;
-        unsigned long base, rate;
+        void __iomem *base;
+        unsigned long rate;
         int i, rc;
         hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
@@ -382,11 +383,13 @@ static int __init palm_bk3710_probe(struct platform_device *pdev)
         base = IO_ADDRESS(mem->start);
 
         /* Configure the Palm Chip controller */
-        palm_bk3710_chipinit((void __iomem *)base);
+        palm_bk3710_chipinit(base);
 
         for (i = 0; i < IDE_NR_PORTS - 2; i++)
-                hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
-        hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
+                hw.io_ports_array[i] = (unsigned long)
+                                (base + IDE_PALM_ATA_PRI_REG_OFFSET + i);
+        hw.io_ports.ctl_addr = (unsigned long)
+                        (base + IDE_PALM_ATA_PRI_CTL_OFFSET);
         hw.irq = irq->start;
         hw.dev = &pdev->dev;
         hw.chipset = ide_palm3710;
diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c
index dc15cadb06ef..38f712036201 100644
--- a/drivers/ieee1394/pcilynx.c
+++ b/drivers/ieee1394/pcilynx.c
@@ -1419,7 +1419,6 @@ static int __devinit add_card(struct pci_dev *dev,
                 i2c_ad = kzalloc(sizeof(*i2c_ad), GFP_KERNEL);
                 if (!i2c_ad) FAIL("failed to allocate I2C adapter memory");
 
-                i2c_ad->id = I2C_HW_B_PCILYNX;
                 strlcpy(i2c_ad->name, "PCILynx I2C", sizeof(i2c_ad->name));
                 i2c_adapter_data = bit_data;
                 i2c_ad->algo_data = &i2c_adapter_data;
diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c
index a3551dd0324d..aa30b5cb3513 100644
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -431,6 +431,7 @@ set_arg(void __user *b, void *val,int len)
         return 0;
 }
 
+#ifdef CONFIG_IPPP_FILTER
 static int get_filter(void __user *arg, struct sock_filter **p)
 {
         struct sock_fprog uprog;
@@ -465,6 +466,7 @@ static int get_filter(void __user *arg, struct sock_filter **p)
         *p = code;
         return uprog.len;
 }
+#endif /* CONFIG_IPPP_FILTER */
 
 /*
  * ippp device ioctl
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 419c378bd24b..56073199ceba 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -87,14 +87,6 @@ config PHANTOM
           If you choose to build module, its name will be phantom. If unsure,
           say N here.
 
-config EEPROM_93CX6
-        tristate "EEPROM 93CX6 support"
-        ---help---
-          This is a driver for the EEPROM chipsets 93c46 and 93c66.
-          The driver supports both read as well as write commands.
-
-          If unsure, say N.
-
 config SGI_IOC4
         tristate "SGI IOC4 Base IO support"
         depends on PCI
@@ -231,5 +223,6 @@ config DELL_LAPTOP
         laptops.
 
 source "drivers/misc/c2port/Kconfig"
+source "drivers/misc/eeprom/Kconfig"
 
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index d5749a7bc777..bc1199830554 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -13,10 +13,10 @@ obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
 obj-$(CONFIG_TIFM_7XX1)         += tifm_7xx1.o
 obj-$(CONFIG_PHANTOM)           += phantom.o
 obj-$(CONFIG_SGI_IOC4)          += ioc4.o
-obj-$(CONFIG_EEPROM_93CX6)      += eeprom_93cx6.o
 obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
 obj-$(CONFIG_KGDB_TESTS)        += kgdbts.o
 obj-$(CONFIG_SGI_XP)            += sgi-xp/
 obj-$(CONFIG_SGI_GRU)           += sgi-gru/
 obj-$(CONFIG_HP_ILO)            += hpilo.o
 obj-$(CONFIG_C2PORT)            += c2port/
+obj-y                           += eeprom/
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
new file mode 100644
index 000000000000..c76df8cda5ef
--- /dev/null
+++ b/drivers/misc/eeprom/Kconfig
@@ -0,0 +1,59 @@
+menu "EEPROM support"
+
+config EEPROM_AT24
+        tristate "I2C EEPROMs from most vendors"
+        depends on I2C && SYSFS && EXPERIMENTAL
+        help
+          Enable this driver to get read/write support to most I2C EEPROMs,
+          after you configure the driver to know about each EEPROM on
+          your target board.  Use these generic chip names, instead of
+          vendor-specific ones like at24c64 or 24lc02:
+
+             24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
+             24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
+
+          Unless you like data loss puzzles, always be sure that any chip
+          you configure as a 24c32 (32 kbit) or larger is NOT really a
+          24c16 (16 kbit) or smaller, and vice versa. Marking the chip
+          as read-only won't help recover from this. Also, if your chip
+          has any software write-protect mechanism you may want to review the
+          code to make sure this driver won't turn it on by accident.
+
+          If you use this with an SMBus adapter instead of an I2C adapter,
+          full functionality is not available.  Only smaller devices are
+          supported (24c16 and below, max 4 kByte).
+
+          This driver can also be built as a module.  If so, the module
+          will be called at24.
+
+config EEPROM_AT25
+        tristate "SPI EEPROMs from most vendors"
+        depends on SPI && SYSFS
+        help
+          Enable this driver to get read/write support to most SPI EEPROMs,
+          after you configure the board init code to know about each eeprom
+          on your target board.
+
+          This driver can also be built as a module.  If so, the module
+          will be called at25.
+
+config EEPROM_LEGACY
+        tristate "Old I2C EEPROM reader"
+        depends on I2C && SYSFS
+        help
+          If you say yes here you get read-only access to the EEPROM data
+          available on modern memory DIMMs and Sony Vaio laptops via I2C. Such
+          EEPROMs could theoretically be available on other devices as well.
+
+          This driver can also be built as a module.  If so, the module
+          will be called eeprom.
+
+config EEPROM_93CX6
+        tristate "EEPROM 93CX6 support"
+        help
+          This is a driver for the EEPROM chipsets 93c46 and 93c66.
+          The driver supports both read as well as write commands.
+
+          If unsure, say N.
+
+endmenu
diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
new file mode 100644
index 000000000000..539dd8f88128
--- /dev/null
+++ b/drivers/misc/eeprom/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_EEPROM_AT24)       += at24.o
+obj-$(CONFIG_EEPROM_AT25)       += at25.o
+obj-$(CONFIG_EEPROM_LEGACY)     += eeprom.o
+obj-$(CONFIG_EEPROM_93CX6)      += eeprom_93cx6.o
diff --git a/drivers/i2c/chips/at24.c b/drivers/misc/eeprom/at24.c
index d4775528abc6..d4775528abc6 100644
--- a/drivers/i2c/chips/at24.c
+++ b/drivers/misc/eeprom/at24.c
diff --git a/drivers/spi/at25.c b/drivers/misc/eeprom/at25.c
index 290dbe99647a..290dbe99647a 100644
--- a/drivers/spi/at25.c
+++ b/drivers/misc/eeprom/at25.c
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/misc/eeprom/eeprom.c
index 2c27193aeaa0..2c27193aeaa0 100644
--- a/drivers/i2c/chips/eeprom.c
+++ b/drivers/misc/eeprom/eeprom.c
diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c
index 15b1780025c8..15b1780025c8 100644
--- a/drivers/misc/eeprom_93cx6.c
+++ b/drivers/misc/eeprom/eeprom_93cx6.c
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index dfa585f7feaf..0efa390978bd 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -76,6 +76,16 @@ config MMC_OMAP
 
           If unsure, say N.
 
+config MMC_OMAP_HS
+        tristate "TI OMAP High Speed Multimedia Card Interface support"
+        depends on ARCH_OMAP2430 || ARCH_OMAP3
+        help
+          This selects the TI OMAP High Speed Multimedia card Interface.
+          If you have an OMAP2430 or OMAP3 board with a Multimedia Card slot,
+          say Y or M here.
+
+          If unsure, say N.
+
 config MMC_WBSD
         tristate "Winbond W83L51xD SD/MMC Card Interface support"
         depends on ISA_DMA_API
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index f4853288bbb1..98cab84829b8 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_RICOH_MMC)	+= ricoh_mmc.o
 obj-$(CONFIG_MMC_WBSD)          += wbsd.o
 obj-$(CONFIG_MMC_AU1X)          += au1xmmc.o
 obj-$(CONFIG_MMC_OMAP)          += omap.o
+obj-$(CONFIG_MMC_OMAP_HS)       += omap_hsmmc.o
 obj-$(CONFIG_MMC_AT91)          += at91_mci.o
 obj-$(CONFIG_MMC_ATMELMCI)      += atmel-mci.o
 obj-$(CONFIG_MMC_TIFM_SD)       += tifm_sd.o
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
new file mode 100644
index 000000000000..db37490f67ec
--- /dev/null
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -0,0 +1,1242 @@
+/*
+ * drivers/mmc/host/omap_hsmmc.c
+ *
+ * Driver for OMAP2430/3430 MMC controller.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ *
+ * Authors:
+ *      Syed Mohammed Khasim    <x0khasim@ti.com>
+ *      Madhusudhan             <madhu.cr@ti.com>
+ *      Mohit Jalori            <mjalori@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/mmc/host.h>
+#include <linux/io.h>
+#include <linux/semaphore.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/mmc.h>
+#include <mach/cpu.h>
+
+/* OMAP HSMMC Host Controller Registers */
+#define OMAP_HSMMC_SYSCONFIG    0x0010
+#define OMAP_HSMMC_CON          0x002C
+#define OMAP_HSMMC_BLK          0x0104
+#define OMAP_HSMMC_ARG          0x0108
+#define OMAP_HSMMC_CMD          0x010C
+#define OMAP_HSMMC_RSP10        0x0110
+#define OMAP_HSMMC_RSP32        0x0114
+#define OMAP_HSMMC_RSP54        0x0118
+#define OMAP_HSMMC_RSP76        0x011C
+#define OMAP_HSMMC_DATA         0x0120
+#define OMAP_HSMMC_HCTL         0x0128
+#define OMAP_HSMMC_SYSCTL       0x012C
+#define OMAP_HSMMC_STAT         0x0130
+#define OMAP_HSMMC_IE           0x0134
+#define OMAP_HSMMC_ISE          0x0138
+#define OMAP_HSMMC_CAPA         0x0140
+
+#define VS18                    (1 << 26)
+#define VS30                    (1 << 25)
+#define SDVS18                  (0x5 << 9)
+#define SDVS30                  (0x6 << 9)
+#define SDVSCLR                 0xFFFFF1FF
+#define SDVSDET                 0x00000400
+#define AUTOIDLE                0x1
+#define SDBP                    (1 << 8)
+#define DTO                     0xe
+#define ICE                     0x1
+#define ICS                     0x2
+#define CEN                     (1 << 2)
+#define CLKD_MASK               0x0000FFC0
+#define CLKD_SHIFT              6
+#define DTO_MASK                0x000F0000
+#define DTO_SHIFT               16
+#define INT_EN_MASK             0x307F0033
+#define INIT_STREAM             (1 << 1)
+#define DP_SELECT               (1 << 21)
+#define DDIR                    (1 << 4)
+#define DMA_EN                  0x1
+#define MSBS                    (1 << 5)
+#define BCE                     (1 << 1)
+#define FOUR_BIT                (1 << 1)
+#define CC                      0x1
+#define TC                      0x02
+#define OD                      0x1
+#define ERR                     (1 << 15)
+#define CMD_TIMEOUT             (1 << 16)
+#define DATA_TIMEOUT            (1 << 20)
+#define CMD_CRC                 (1 << 17)
+#define DATA_CRC                (1 << 21)
+#define CARD_ERR                (1 << 28)
+#define STAT_CLEAR              0xFFFFFFFF
+#define INIT_STREAM_CMD         0x00000000
+#define DUAL_VOLT_OCR_BIT       7
+#define SRC                     (1 << 25)
+#define SRD                     (1 << 26)
+
+/*
+ * FIXME: Most likely all the data using these _DEVID defines should come
+ * from the platform_data, or implemented in controller and slot specific
+ * functions.
+ */
+#define OMAP_MMC1_DEVID         0
+#define OMAP_MMC2_DEVID         1
+
+#define OMAP_MMC_DATADIR_NONE   0
+#define OMAP_MMC_DATADIR_READ   1
+#define OMAP_MMC_DATADIR_WRITE  2
+#define MMC_TIMEOUT_MS          20
+#define OMAP_MMC_MASTER_CLOCK   96000000
+#define DRIVER_NAME             "mmci-omap-hs"
+
+/*
+ * One controller can have multiple slots, like on some omap boards using
+ * omap.c controller driver. Luckily this is not currently done on any known
+ * omap_hsmmc.c device.
+ */
+#define mmc_slot(host)          (host->pdata->slots[host->slot_id])
+
+/*
+ * MMC Host controller read/write API's
+ */
+#define OMAP_HSMMC_READ(base, reg)      \
+        __raw_readl((base) + OMAP_HSMMC_##reg)
+
+#define OMAP_HSMMC_WRITE(base, reg, val) \
+        __raw_writel((val), (base) + OMAP_HSMMC_##reg)
+
+struct mmc_omap_host {
+        struct  device          *dev;
+        struct  mmc_host        *mmc;
+        struct  mmc_request     *mrq;
+        struct  mmc_command     *cmd;
+        struct  mmc_data        *data;
+        struct  clk             *fclk;
+        struct  clk             *iclk;
+        struct  clk             *dbclk;
+        struct  semaphore       sem;
+        struct  work_struct     mmc_carddetect_work;
+        void    __iomem         *base;
+        resource_size_t         mapbase;
+        unsigned int            id;
+        unsigned int            dma_len;
+        unsigned int            dma_dir;
+        unsigned char           bus_mode;
+        unsigned char           datadir;
+        u32                     *buffer;
+        u32                     bytesleft;
+        int                     suspended;
+        int                     irq;
+        int                     carddetect;
+        int                     use_dma, dma_ch;
+        int                     initstr;
+        int                     slot_id;
+        int                     dbclk_enabled;
+        struct  omap_mmc_platform_data  *pdata;
+};
+
+/*
+ * Stop clock to the card
+ */
+static void omap_mmc_stop_clock(struct mmc_omap_host *host)
+{
+        OMAP_HSMMC_WRITE(host->base, SYSCTL,
+                OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN);
+        if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0)
+                dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n");
+}
+
+/*
+ * Send init stream sequence to card
+ * before sending IDLE command
+ */
+static void send_init_stream(struct mmc_omap_host *host)
+{
+        int reg = 0;
+        unsigned long timeout;
+
+        disable_irq(host->irq);
+        OMAP_HSMMC_WRITE(host->base, CON,
+                OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM);
+        OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD);
+
+        timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
+        while ((reg != CC) && time_before(jiffies, timeout))
+                reg = OMAP_HSMMC_READ(host->base, STAT) & CC;
+
+        OMAP_HSMMC_WRITE(host->base, CON,
+                OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM);
+        enable_irq(host->irq);
+}
+
+static inline
+int mmc_omap_cover_is_closed(struct mmc_omap_host *host)
+{
+        int r = 1;
+
+        if (host->pdata->slots[host->slot_id].get_cover_state)
+                r = host->pdata->slots[host->slot_id].get_cover_state(host->dev,
+                        host->slot_id);
+        return r;
+}
+
+static ssize_t
+mmc_omap_show_cover_switch(struct device *dev, struct device_attribute *attr,
+                           char *buf)
+{
+        struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
+        struct mmc_omap_host *host = mmc_priv(mmc);
+
+        return sprintf(buf, "%s\n", mmc_omap_cover_is_closed(host) ? "closed" :
+                       "open");
+}
+
+static DEVICE_ATTR(cover_switch, S_IRUGO, mmc_omap_show_cover_switch, NULL);
+
+static ssize_t
+mmc_omap_show_slot_name(struct device *dev, struct device_attribute *attr,
+                        char *buf)
+{
+        struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
+        struct mmc_omap_host *host = mmc_priv(mmc);
+        struct omap_mmc_slot_data slot = host->pdata->slots[host->slot_id];
+
+        return sprintf(buf, "slot:%s\n", slot.name);
+}
+
+static DEVICE_ATTR(slot_name, S_IRUGO, mmc_omap_show_slot_name, NULL);
+
+/*
+ * Configure the response type and send the cmd.
+ */
+static void
+mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd,
+        struct mmc_data *data)
+{
+        int cmdreg = 0, resptype = 0, cmdtype = 0;
+
+        dev_dbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n",
+                mmc_hostname(host->mmc), cmd->opcode, cmd->arg);
+        host->cmd = cmd;
+
+        /*
+         * Clear status bits and enable interrupts
+         */
+        OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
+        OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK);
+        OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
+
+        if (cmd->flags & MMC_RSP_PRESENT) {
+                if (cmd->flags & MMC_RSP_136)
+                        resptype = 1;
+                else
+                        resptype = 2;
+        }
+
+        /*
+         * Unlike OMAP1 controller, the cmdtype does not seem to be based on
+         * ac, bc, adtc, bcr. Only commands ending an open ended transfer need
+         * a val of 0x3, rest 0x0.
+         */
+        if (cmd == host->mrq->stop)
+                cmdtype = 0x3;
+
+        cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
+
+        if (data) {
+                cmdreg |= DP_SELECT | MSBS | BCE;
+                if (data->flags & MMC_DATA_READ)
+                        cmdreg |= DDIR;
+                else
+                        cmdreg &= ~(DDIR);
+        }
+
+        if (host->use_dma)
+                cmdreg |= DMA_EN;
+
+        OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg);
+        OMAP_HSMMC_WRITE(host->base, CMD, cmdreg);
+}
+
+/*
+ * Notify the transfer complete to MMC core
+ */
+static void
+mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
+{
+        host->data = NULL;
+
+        if (host->use_dma && host->dma_ch != -1)
+                dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
+                        host->dma_dir);
+
+        host->datadir = OMAP_MMC_DATADIR_NONE;
+
+        if (!data->error)
+                data->bytes_xfered += data->blocks * (data->blksz);
+        else
+                data->bytes_xfered = 0;
+
+        if (!data->stop) {
+                host->mrq = NULL;
+                mmc_request_done(host->mmc, data->mrq);
+                return;
+        }
+        mmc_omap_start_command(host, data->stop, NULL);
+}
+
+/*
+ * Notify the core about command completion
+ */
+static void
+mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
+{
+        host->cmd = NULL;
+
+        if (cmd->flags & MMC_RSP_PRESENT) {
+                if (cmd->flags & MMC_RSP_136) {
+                        /* response type 2 */
+                        cmd->resp[3] = OMAP_HSMMC_READ(host->base, RSP10);
+                        cmd->resp[2] = OMAP_HSMMC_READ(host->base, RSP32);
+                        cmd->resp[1] = OMAP_HSMMC_READ(host->base, RSP54);
+                        cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP76);
+                } else {
+                        /* response types 1, 1b, 3, 4, 5, 6 */
+                        cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10);
+                }
+        }
+        if (host->data == NULL || cmd->error) {
+                host->mrq = NULL;
+                mmc_request_done(host->mmc, cmd->mrq);
+        }
+}
+
+/*
+ * DMA clean up for command errors
+ */
+static void mmc_dma_cleanup(struct mmc_omap_host *host)
+{
+        host->data->error = -ETIMEDOUT;
+
+        if (host->use_dma && host->dma_ch != -1) {
+                dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len,
+                        host->dma_dir);
+                omap_free_dma(host->dma_ch);
+                host->dma_ch = -1;
+                up(&host->sem);
+        }
+        host->data = NULL;
+        host->datadir = OMAP_MMC_DATADIR_NONE;
+}
+
+/*
+ * Readable error output
+ */
+#ifdef CONFIG_MMC_DEBUG
+static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status)
+{
+        /* --- means reserved bit without definition at documentation */
+        static const char *mmc_omap_status_bits[] = {
+                "CC", "TC", "BGE", "---", "BWR", "BRR", "---", "---", "CIRQ",
+                "OBI", "---", "---", "---", "---", "---", "ERRI", "CTO", "CCRC",
+                "CEB", "CIE", "DTO", "DCRC", "DEB", "---", "ACE", "---",
+                "---", "---", "---", "CERR", "CERR", "BADA", "---", "---", "---"
+        };
+        char res[256];
+        char *buf = res;
+        int len, i;
+
+        len = sprintf(buf, "MMC IRQ 0x%x :", status);
+        buf += len;
+
+        for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++)
+                if (status & (1 << i)) {
+                        len = sprintf(buf, " %s", mmc_omap_status_bits[i]);
+                        buf += len;
+                }
+
+        dev_dbg(mmc_dev(host->mmc), "%s\n", res);
+}
+#endif  /* CONFIG_MMC_DEBUG */
+
+
+/*
+ * MMC controller IRQ handler
+ */
+static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
+{
+        struct mmc_omap_host *host = dev_id;
+        struct mmc_data *data;
+        int end_cmd = 0, end_trans = 0, status;
+
+        if (host->cmd == NULL && host->data == NULL) {
+                OMAP_HSMMC_WRITE(host->base, STAT,
+                        OMAP_HSMMC_READ(host->base, STAT));
+                return IRQ_HANDLED;
+        }
+
+        data = host->data;
+        status = OMAP_HSMMC_READ(host->base, STAT);
+        dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
+
+        if (status & ERR) {
+#ifdef CONFIG_MMC_DEBUG
+                mmc_omap_report_irq(host, status);
+#endif
+                if ((status & CMD_TIMEOUT) ||
+                        (status & CMD_CRC)) {
+                        if (host->cmd) {
+                                if (status & CMD_TIMEOUT) {
+                                        OMAP_HSMMC_WRITE(host->base, SYSCTL,
+                                                OMAP_HSMMC_READ(host->base,
+                                                                SYSCTL) | SRC);
+                                        while (OMAP_HSMMC_READ(host->base,
+                                                        SYSCTL) & SRC)
+                                                ;
+
+                                        host->cmd->error = -ETIMEDOUT;
+                                } else {
+                                        host->cmd->error = -EILSEQ;
+                                }
+                                end_cmd = 1;
+                        }
+                        if (host->data)
+                                mmc_dma_cleanup(host);
+                }
+                if ((status & DATA_TIMEOUT) ||
+                        (status & DATA_CRC)) {
+                        if (host->data) {
+                                if (status & DATA_TIMEOUT)
+                                        mmc_dma_cleanup(host);
+                                else
+                                        host->data->error = -EILSEQ;
+                                OMAP_HSMMC_WRITE(host->base, SYSCTL,
+                                        OMAP_HSMMC_READ(host->base,
+                                                        SYSCTL) | SRD);
+                                while (OMAP_HSMMC_READ(host->base,
+                                                SYSCTL) & SRD)
+                                        ;
+                                end_trans = 1;
+                        }
+                }
+                if (status & CARD_ERR) {
+                        dev_dbg(mmc_dev(host->mmc),
+                                "Ignoring card err CMD%d\n", host->cmd->opcode);
+                        if (host->cmd)
+                                end_cmd = 1;
+                        if (host->data)
+                                end_trans = 1;
+                }
+        }
+
+        OMAP_HSMMC_WRITE(host->base, STAT, status);
+
+        if (end_cmd || (status & CC))
+                mmc_omap_cmd_done(host, host->cmd);
+        if (end_trans || (status & TC))
+                mmc_omap_xfer_done(host, data);
+
+        return IRQ_HANDLED;
+}
+
+/*
+ * Switch MMC operating voltage
+ */
+static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
+{
+        u32 reg_val = 0;
+        int ret;
+
+        /* Disable the clocks */
+        clk_disable(host->fclk);
+        clk_disable(host->iclk);
+        clk_disable(host->dbclk);
+
+        /* Turn the power off */
+        ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
+        if (ret != 0)
+                goto err;
+
+        /* Turn the power ON with given VDD 1.8 or 3.0v */
+        ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd);
+        if (ret != 0)
+                goto err;
+
+        clk_enable(host->fclk);
+        clk_enable(host->iclk);
+        clk_enable(host->dbclk);
+
+        OMAP_HSMMC_WRITE(host->base, HCTL,
+                OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
+        reg_val = OMAP_HSMMC_READ(host->base, HCTL);
+        /*
+         * If a MMC dual voltage card is detected, the set_ios fn calls
+         * this fn with VDD bit set for 1.8V. Upon card removal from the
+         * slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF.
+         *
+         * Only MMC1 supports 3.0V.  MMC2 will not function if SDVS30 is
+         * set in HCTL.
+         */
+        if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) ||
+                                ((1 << vdd) == MMC_VDD_33_34)))
+                reg_val |= SDVS30;
+        if ((1 << vdd) == MMC_VDD_165_195)
+                reg_val |= SDVS18;
+
+        OMAP_HSMMC_WRITE(host->base, HCTL, reg_val);
+
+        OMAP_HSMMC_WRITE(host->base, HCTL,
+                OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
+
+        return 0;
+err:
+        dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n");
+        return ret;
+}
+
+/*
+ * Work Item to notify the core about card insertion/removal
+ */
+static void mmc_omap_detect(struct work_struct *work)
+{
+        struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
+                                                mmc_carddetect_work);
+
+        sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
+        if (host->carddetect) {
+                mmc_detect_change(host->mmc, (HZ * 200) / 1000);
+        } else {
+                OMAP_HSMMC_WRITE(host->base, SYSCTL,
+                        OMAP_HSMMC_READ(host->base, SYSCTL) | SRD);
+                while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD)
+                        ;
+
+                mmc_detect_change(host->mmc, (HZ * 50) / 1000);
+        }
+}
+
+/*
+ * ISR for handling card insertion and removal
+ */
+static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id)
+{
+        struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id;
+
+        host->carddetect = mmc_slot(host).card_detect(irq);
+        schedule_work(&host->mmc_carddetect_work);
+
+        return IRQ_HANDLED;
+}
+
+/*
+ * DMA call back function
+ */
+static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data)
+{
+        struct mmc_omap_host *host = data;
+
+        if (ch_status & OMAP2_DMA_MISALIGNED_ERR_IRQ)
+                dev_dbg(mmc_dev(host->mmc), "MISALIGNED_ADRS_ERR\n");
+
+        if (host->dma_ch < 0)
+                return;
+
+        omap_free_dma(host->dma_ch);
+        host->dma_ch = -1;
+        /*
+         * DMA Callback: run in interrupt context.
+         * mutex_unlock will through a kernel warning if used.
+         */
+        up(&host->sem);
+}
+
+/*
+ * Configure dma src and destination parameters
+ */
+static int mmc_omap_config_dma_param(int sync_dir, struct mmc_omap_host *host,
+                                struct mmc_data *data)
+{
+        if (sync_dir == 0) {
+                omap_set_dma_dest_params(host->dma_ch, 0,
+                        OMAP_DMA_AMODE_CONSTANT,
+                        (host->mapbase + OMAP_HSMMC_DATA), 0, 0);
+                omap_set_dma_src_params(host->dma_ch, 0,
+                        OMAP_DMA_AMODE_POST_INC,
+                        sg_dma_address(&data->sg[0]), 0, 0);
+        } else {
+                omap_set_dma_src_params(host->dma_ch, 0,
+                        OMAP_DMA_AMODE_CONSTANT,
+                        (host->mapbase + OMAP_HSMMC_DATA), 0, 0);
+                omap_set_dma_dest_params(host->dma_ch, 0,
+                        OMAP_DMA_AMODE_POST_INC,
+                        sg_dma_address(&data->sg[0]), 0, 0);
+        }
+        return 0;
+}
+/*
+ * Routine to configure and start DMA for the MMC card
+ */
+static int
+mmc_omap_start_dma_transfer(struct mmc_omap_host *host, struct mmc_request *req)
+{
+        int sync_dev, sync_dir = 0;
+        int dma_ch = 0, ret = 0, err = 1;
+        struct mmc_data *data = req->data;
+
+        /*
+         * If for some reason the DMA transfer is still active,
+         * we wait for timeout period and free the dma
+         */
+        if (host->dma_ch != -1) {
+                set_current_state(TASK_UNINTERRUPTIBLE);
+                schedule_timeout(100);
+                if (down_trylock(&host->sem)) {
+                        omap_free_dma(host->dma_ch);
+                        host->dma_ch = -1;
+                        up(&host->sem);
+                        return err;
+                }
+        } else {
+                if (down_trylock(&host->sem))
+                        return err;
+        }
+
+        if (!(data->flags & MMC_DATA_WRITE)) {
+                host->dma_dir = DMA_FROM_DEVICE;
+                if (host->id == OMAP_MMC1_DEVID)
+                        sync_dev = OMAP24XX_DMA_MMC1_RX;
+                else
+                        sync_dev = OMAP24XX_DMA_MMC2_RX;
+        } else {
+                host->dma_dir = DMA_TO_DEVICE;
+                if (host->id == OMAP_MMC1_DEVID)
+                        sync_dev = OMAP24XX_DMA_MMC1_TX;
+                else
+                        sync_dev = OMAP24XX_DMA_MMC2_TX;
+        }
+
+        ret = omap_request_dma(sync_dev, "MMC/SD", mmc_omap_dma_cb,
+                        host, &dma_ch);
+        if (ret != 0) {
+                dev_dbg(mmc_dev(host->mmc),
+                        "%s: omap_request_dma() failed with %d\n",
+                        mmc_hostname(host->mmc), ret);
+                return ret;
+        }
+
+        host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg,
+                        data->sg_len, host->dma_dir);
+        host->dma_ch = dma_ch;
+
+        if (!(data->flags & MMC_DATA_WRITE))
+                mmc_omap_config_dma_param(1, host, data);
+        else
+                mmc_omap_config_dma_param(0, host, data);
+
+        if ((data->blksz % 4) == 0)
+                omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S32,
+                        (data->blksz / 4), data->blocks, OMAP_DMA_SYNC_FRAME,
+                        sync_dev, sync_dir);
+        else
+                /* REVISIT: The MMC buffer increments only when MSB is written.
+                 * Return error for blksz which is non multiple of four.
+                 */
+                return -EINVAL;
+
+        omap_start_dma(dma_ch);
+        return 0;
+}
+
+static void set_data_timeout(struct mmc_omap_host *host,
+                             struct mmc_request *req)
+{
+        unsigned int timeout, cycle_ns;
+        uint32_t reg, clkd, dto = 0;
+
+        reg = OMAP_HSMMC_READ(host->base, SYSCTL);
+        clkd = (reg & CLKD_MASK) >> CLKD_SHIFT;
+        if (clkd == 0)
+                clkd = 1;
+
+        cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd);
+        timeout = req->data->timeout_ns / cycle_ns;
+        timeout += req->data->timeout_clks;
+        if (timeout) {
+                while ((timeout & 0x80000000) == 0) {
+                        dto += 1;
+                        timeout <<= 1;
+                }
+                dto = 31 - dto;
+                timeout <<= 1;
+                if (timeout && dto)
+                        dto += 1;
+                if (dto >= 13)
+                        dto -= 13;
+                else
+                        dto = 0;
+                if (dto > 14)
+                        dto = 14;
+        }
+
+        reg &= ~DTO_MASK;
+        reg |= dto << DTO_SHIFT;
+        OMAP_HSMMC_WRITE(host->base, SYSCTL, reg);
+}
+
+/*
+ * Configure block length for MMC/SD cards and initiate the transfer.
+ */
+static int
+mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
+{
+        int ret;
+        host->data = req->data;
+
+        if (req->data == NULL) {
+                host->datadir = OMAP_MMC_DATADIR_NONE;
+                OMAP_HSMMC_WRITE(host->base, BLK, 0);
+                return 0;
+        }
+
+        OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz)
+                                        | (req->data->blocks << 16));
+        set_data_timeout(host, req);
+
+        host->datadir = (req->data->flags & MMC_DATA_WRITE) ?
+                        OMAP_MMC_DATADIR_WRITE : OMAP_MMC_DATADIR_READ;
+
+        if (host->use_dma) {
+                ret = mmc_omap_start_dma_transfer(host, req);
+                if (ret != 0) {
+                        dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n");
+                        return ret;
+                }
+        }
+        return 0;
+}
+
+/*
+ * Request function. for read/write operation
+ */
+static void omap_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+        struct mmc_omap_host *host = mmc_priv(mmc);
+
+        WARN_ON(host->mrq != NULL);
+        host->mrq = req;
+        mmc_omap_prepare_data(host, req);
+        mmc_omap_start_command(host, req->cmd, req->data);
+}
+
+
+/* Routine to configure clock values. Exposed API to core */
+static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+        struct mmc_omap_host *host = mmc_priv(mmc);
+        u16 dsor = 0;
+        unsigned long regval;
+        unsigned long timeout;
+
+        switch (ios->power_mode) {
+        case MMC_POWER_OFF:
+                mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
+                /*
+                 * Reset bus voltage to 3V if it got set to 1.8V earlier.
+                 * REVISIT: If we are able to detect cards after unplugging
+                 * a 1.8V card, this code should not be needed.
+                 */
+                if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
+                        int vdd = fls(host->mmc->ocr_avail) - 1;
+                        if (omap_mmc_switch_opcond(host, vdd) != 0)
+                                host->mmc->ios.vdd = vdd;
+                }
+                break;
+        case MMC_POWER_UP:
+                mmc_slot(host).set_power(host->dev, host->slot_id, 1, ios->vdd);
+                break;
+        }
+
+        switch (mmc->ios.bus_width) {
+        case MMC_BUS_WIDTH_4:
+                OMAP_HSMMC_WRITE(host->base, HCTL,
+                        OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT);
+                break;
+        case MMC_BUS_WIDTH_1:
+                OMAP_HSMMC_WRITE(host->base, HCTL,
+                        OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT);
+                break;
+        }
+
+        if (host->id == OMAP_MMC1_DEVID) {
+                /* Only MMC1 can operate at 3V/1.8V */
+                if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
+                        (ios->vdd == DUAL_VOLT_OCR_BIT)) {
+                                /*
+                                 * The mmc_select_voltage fn of the core does
+                                 * not seem to set the power_mode to
+                                 * MMC_POWER_UP upon recalculating the voltage.
+                                 * vdd 1.8v.
+                                 */
+                                if (omap_mmc_switch_opcond(host, ios->vdd) != 0)
+                                        dev_dbg(mmc_dev(host->mmc),
+                                                "Switch operation failed\n");
+                }
+        }
+
+        if (ios->clock) {
+                dsor = OMAP_MMC_MASTER_CLOCK / ios->clock;
+                if (dsor < 1)
+                        dsor = 1;
+
+                if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock)
+                        dsor++;
+
+                if (dsor > 250)
+                        dsor = 250;
+        }
+        omap_mmc_stop_clock(host);
+        regval = OMAP_HSMMC_READ(host->base, SYSCTL);
+        regval = regval & ~(CLKD_MASK);
+        regval = regval | (dsor << 6) | (DTO << 16);
+        OMAP_HSMMC_WRITE(host->base, SYSCTL, regval);
+        OMAP_HSMMC_WRITE(host->base, SYSCTL,
+                OMAP_HSMMC_READ(host->base, SYSCTL) | ICE);
+
+        /* Wait till the ICS bit is set */
+        timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
+        while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != 0x2
+                && time_before(jiffies, timeout))
+                msleep(1);
+
+        OMAP_HSMMC_WRITE(host->base, SYSCTL,
+                OMAP_HSMMC_READ(host->base, SYSCTL) | CEN);
+
+        if (ios->power_mode == MMC_POWER_ON)
+                send_init_stream(host);
+
+        if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
+                OMAP_HSMMC_WRITE(host->base, CON,
+                                OMAP_HSMMC_READ(host->base, CON) | OD);
+}
+
+static int omap_hsmmc_get_cd(struct mmc_host *mmc)
+{
+        struct mmc_omap_host *host = mmc_priv(mmc);
+        struct omap_mmc_platform_data *pdata = host->pdata;
+
+        if (!pdata->slots[0].card_detect)
+                return -ENOSYS;
+        return pdata->slots[0].card_detect(pdata->slots[0].card_detect_irq);
+}
+
+static int omap_hsmmc_get_ro(struct mmc_host *mmc)
+{
+        struct mmc_omap_host *host = mmc_priv(mmc);
+        struct omap_mmc_platform_data *pdata = host->pdata;
+
+        if (!pdata->slots[0].get_ro)
+                return -ENOSYS;
+        return pdata->slots[0].get_ro(host->dev, 0);
+}
+
+static struct mmc_host_ops mmc_omap_ops = {
+        .request = omap_mmc_request,
+        .set_ios = omap_mmc_set_ios,
+        .get_cd = omap_hsmmc_get_cd,
+        .get_ro = omap_hsmmc_get_ro,
+        /* NYET -- enable_sdio_irq */
+};
+
+static int __init omap_mmc_probe(struct platform_device *pdev)
+{
+        struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
+        struct mmc_host *mmc;
+        struct mmc_omap_host *host = NULL;
+        struct resource *res;
+        int ret = 0, irq;
+        u32 hctl, capa;
+
+        if (pdata == NULL) {
+                dev_err(&pdev->dev, "Platform Data is missing\n");
+                return -ENXIO;
+        }
+
+        if (pdata->nr_slots == 0) {
+                dev_err(&pdev->dev, "No Slots\n");
+                return -ENXIO;
+        }
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        irq = platform_get_irq(pdev, 0);
+        if (res == NULL || irq < 0)
+                return -ENXIO;
+
+        res = request_mem_region(res->start, res->end - res->start + 1,
+                                                        pdev->name);
+        if (res == NULL)
+                return -EBUSY;
+
+        mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev);
+        if (!mmc) {
+                ret = -ENOMEM;
+                goto err;
+        }
+
+        host            = mmc_priv(mmc);
+        host->mmc       = mmc;
+        host->pdata     = pdata;
+        host->dev       = &pdev->dev;
+        host->use_dma   = 1;
+        host->dev->dma_mask = &pdata->dma_mask;
+        host->dma_ch    = -1;
+        host->irq       = irq;
+        host->id        = pdev->id;
+        host->slot_id   = 0;
+        host->mapbase   = res->start;
+        host->base      = ioremap(host->mapbase, SZ_4K);
+
+        platform_set_drvdata(pdev, host);
+        INIT_WORK(&host->mmc_carddetect_work, mmc_omap_detect);
+
+        mmc->ops        = &mmc_omap_ops;
+        mmc->f_min      = 400000;
+        mmc->f_max      = 52000000;
+
+        sema_init(&host->sem, 1);
+
+        host->iclk = clk_get(&pdev->dev, "mmchs_ick");
+        if (IS_ERR(host->iclk)) {
+                ret = PTR_ERR(host->iclk);
+                host->iclk = NULL;
+                goto err1;
+        }
+        host->fclk = clk_get(&pdev->dev, "mmchs_fck");
+        if (IS_ERR(host->fclk)) {
+                ret = PTR_ERR(host->fclk);
+                host->fclk = NULL;
+                clk_put(host->iclk);
+                goto err1;
+        }
+
+        if (clk_enable(host->fclk) != 0) {
+                clk_put(host->iclk);
+                clk_put(host->fclk);
+                goto err1;
+        }
+
+        if (clk_enable(host->iclk) != 0) {
+                clk_disable(host->fclk);
+                clk_put(host->iclk);
+                clk_put(host->fclk);
+                goto err1;
+        }
+
+        host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck");
+        /*
+         * MMC can still work without debounce clock.
+         */
+        if (IS_ERR(host->dbclk))
+                dev_warn(mmc_dev(host->mmc), "Failed to get debounce clock\n");
+        else
+                if (clk_enable(host->dbclk) != 0)
+                        dev_dbg(mmc_dev(host->mmc), "Enabling debounce"
+                                                        " clk failed\n");
+                else
+                        host->dbclk_enabled = 1;
+
+#ifdef CONFIG_MMC_BLOCK_BOUNCE
+        mmc->max_phys_segs = 1;
+        mmc->max_hw_segs = 1;
+#endif
+        mmc->max_blk_size = 512;       /* Block Length at max can be 1024 */
+        mmc->max_blk_count = 0xFFFF;    /* No. of Blocks is 16 bits */
+        mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+        mmc->max_seg_size = mmc->max_req_size;
+
+        mmc->ocr_avail = mmc_slot(host).ocr_mask;
+        mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
+
+        if (pdata->slots[host->slot_id].wires >= 4)
+                mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+        /* Only MMC1 supports 3.0V */
+        if (host->id == OMAP_MMC1_DEVID) {
+                hctl = SDVS30;
+                capa = VS30 | VS18;
+        } else {
+                hctl = SDVS18;
+                capa = VS18;
+        }
+
+        OMAP_HSMMC_WRITE(host->base, HCTL,
+                        OMAP_HSMMC_READ(host->base, HCTL) | hctl);
+
+        OMAP_HSMMC_WRITE(host->base, CAPA,
+                        OMAP_HSMMC_READ(host->base, CAPA) | capa);
+
+        /* Set the controller to AUTO IDLE mode */
+        OMAP_HSMMC_WRITE(host->base, SYSCONFIG,
+                        OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE);
+
+        /* Set SD bus power bit */
+        OMAP_HSMMC_WRITE(host->base, HCTL,
+                        OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
+
+        /* Request IRQ for MMC operations */
+        ret = request_irq(host->irq, mmc_omap_irq, IRQF_DISABLED,
+                        mmc_hostname(mmc), host);
+        if (ret) {
+                dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n");
+                goto err_irq;
+        }
+
+        if (pdata->init != NULL) {
+                if (pdata->init(&pdev->dev) != 0) {
+                        dev_dbg(mmc_dev(host->mmc),
+                                "Unable to configure MMC IRQs\n");
+                        goto err_irq_cd_init;
+                }
+        }
+
+        /* Request IRQ for card detect */
+        if ((mmc_slot(host).card_detect_irq) && (mmc_slot(host).card_detect)) {
+                ret = request_irq(mmc_slot(host).card_detect_irq,
+                                  omap_mmc_cd_handler,
+                                  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
+                                          | IRQF_DISABLED,
+                                  mmc_hostname(mmc), host);
+                if (ret) {
+                        dev_dbg(mmc_dev(host->mmc),
+                                "Unable to grab MMC CD IRQ\n");
+                        goto err_irq_cd;
+                }
+        }
+
+        OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK);
+        OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
+
+        mmc_add_host(mmc);
+
+        if (host->pdata->slots[host->slot_id].name != NULL) {
+                ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name);
+                if (ret < 0)
+                        goto err_slot_name;
+        }
+        if (mmc_slot(host).card_detect_irq && mmc_slot(host).card_detect &&
+                        host->pdata->slots[host->slot_id].get_cover_state) {
+                ret = device_create_file(&mmc->class_dev,
+                                        &dev_attr_cover_switch);
+                if (ret < 0)
+                        goto err_cover_switch;
+        }
+
+        return 0;
+
+err_cover_switch:
+        device_remove_file(&mmc->class_dev, &dev_attr_cover_switch);
+err_slot_name:
+        mmc_remove_host(mmc);
+err_irq_cd:
+        free_irq(mmc_slot(host).card_detect_irq, host);
+err_irq_cd_init:
+        free_irq(host->irq, host);
+err_irq:
+        clk_disable(host->fclk);
+        clk_disable(host->iclk);
+        clk_put(host->fclk);
+        clk_put(host->iclk);
+        if (host->dbclk_enabled) {
+                clk_disable(host->dbclk);
+                clk_put(host->dbclk);
+        }
+
+err1:
+        iounmap(host->base);
+err:
+        dev_dbg(mmc_dev(host->mmc), "Probe Failed\n");
+        release_mem_region(res->start, res->end - res->start + 1);
+        if (host)
+                mmc_free_host(mmc);
+        return ret;
+}
+
+static int omap_mmc_remove(struct platform_device *pdev)
+{
+        struct mmc_omap_host *host = platform_get_drvdata(pdev);
+        struct resource *res;
+
+        if (host) {
+                mmc_remove_host(host->mmc);
+                if (host->pdata->cleanup)
+                        host->pdata->cleanup(&pdev->dev);
+                free_irq(host->irq, host);
+                if (mmc_slot(host).card_detect_irq)
+                        free_irq(mmc_slot(host).card_detect_irq, host);
+                flush_scheduled_work();
+
+                clk_disable(host->fclk);
+                clk_disable(host->iclk);
+                clk_put(host->fclk);
+                clk_put(host->iclk);
+                if (host->dbclk_enabled) {
+                        clk_disable(host->dbclk);
+                        clk_put(host->dbclk);
+                }
+
+                mmc_free_host(host->mmc);
+                iounmap(host->base);
+        }
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (res)
+                release_mem_region(res->start, res->end - res->start + 1);
+        platform_set_drvdata(pdev, NULL);
+
+        return 0;
+}
+
+#ifdef CONFIG_PM
+static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+        int ret = 0;
+        struct mmc_omap_host *host = platform_get_drvdata(pdev);
+
+        if (host && host->suspended)
+                return 0;
+
+        if (host) {
+                ret = mmc_suspend_host(host->mmc, state);
+                if (ret == 0) {
+                        host->suspended = 1;
+
+                        OMAP_HSMMC_WRITE(host->base, ISE, 0);
+                        OMAP_HSMMC_WRITE(host->base, IE, 0);
+
+                        if (host->pdata->suspend) {
+                                ret = host->pdata->suspend(&pdev->dev,
+                                                                host->slot_id);
+                                if (ret)
+                                        dev_dbg(mmc_dev(host->mmc),
+                                                "Unable to handle MMC board"
+                                                " level suspend\n");
+                        }
+
+                        if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
+                                OMAP_HSMMC_WRITE(host->base, HCTL,
+                                        OMAP_HSMMC_READ(host->base, HCTL)
+                                        & SDVSCLR);
+                                OMAP_HSMMC_WRITE(host->base, HCTL,
+                                        OMAP_HSMMC_READ(host->base, HCTL)
+                                        | SDVS30);
+                                OMAP_HSMMC_WRITE(host->base, HCTL,
+                                        OMAP_HSMMC_READ(host->base, HCTL)
+                                        | SDBP);
+                        }
+
+                        clk_disable(host->fclk);
+                        clk_disable(host->iclk);
+                        clk_disable(host->dbclk);
+                }
+
+        }
+        return ret;
+}
+
+/* Routine to resume the MMC device */
+static int omap_mmc_resume(struct platform_device *pdev)
+{
+        int ret = 0;
+        struct mmc_omap_host *host = platform_get_drvdata(pdev);
+
+        if (host && !host->suspended)
+                return 0;
+
+        if (host) {
+
+                ret = clk_enable(host->fclk);
+                if (ret)
+                        goto clk_en_err;
+
+                ret = clk_enable(host->iclk);
+                if (ret) {
+                        clk_disable(host->fclk);
+                        clk_put(host->fclk);
+                        goto clk_en_err;
+                }
+
+                if (clk_enable(host->dbclk) != 0)
+                        dev_dbg(mmc_dev(host->mmc),
+                                        "Enabling debounce clk failed\n");
+
+                if (host->pdata->resume) {
+                        ret = host->pdata->resume(&pdev->dev, host->slot_id);
+                        if (ret)
+                                dev_dbg(mmc_dev(host->mmc),
+                                        "Unmask interrupt failed\n");
+                }
+
+                /* Notify the core to resume the host */
+                ret = mmc_resume_host(host->mmc);
+                if (ret == 0)
+                        host->suspended = 0;
+        }
+
+        return ret;
+
+clk_en_err:
+        dev_dbg(mmc_dev(host->mmc),
+                "Failed to enable MMC clocks during resume\n");
+        return ret;
+}
+
+#else
+#define omap_mmc_suspend        NULL
+#define omap_mmc_resume         NULL
+#endif
+
+static struct platform_driver omap_mmc_driver = {
+        .probe          = omap_mmc_probe,
+        .remove         = omap_mmc_remove,
+        .suspend        = omap_mmc_suspend,
+        .resume         = omap_mmc_resume,
+        .driver         = {
+                .name = DRIVER_NAME,
+                .owner = THIS_MODULE,
+        },
+};
+
+static int __init omap_mmc_init(void)
+{
+        /* Register the MMC driver */
+        return platform_driver_register(&omap_mmc_driver);
+}
+
+static void __exit omap_mmc_cleanup(void)
+{
+        /* Unregister MMC driver */
+        platform_driver_unregister(&omap_mmc_driver);
+}
+
+module_init(omap_mmc_init);
+module_exit(omap_mmc_cleanup);
+
+MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index fcc98a4cce3c..35a98eec7414 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -20,7 +20,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 
-#include <asm/dma.h>
+#include <mach/dma.h>
 
 #include <mach/regs-sdi.h>
 #include <mach/regs-gpio.h>
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 96ecc1766fa8..77a4f1446156 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -629,7 +629,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
         }
 
         if (c->gpio_irq) {
-                if ((r = omap_request_gpio(c->gpio_irq)) < 0) {
+                if ((r = gpio_request(c->gpio_irq, "OneNAND irq")) < 0) {
                         dev_err(&pdev->dev,  "Failed to request GPIO%d for "
                                 "OneNAND\n", c->gpio_irq);
                         goto err_iounmap;
@@ -726,7 +726,7 @@ err_release_dma:
                 free_irq(gpio_to_irq(c->gpio_irq), c);
 err_release_gpio:
         if (c->gpio_irq)
-                omap_free_gpio(c->gpio_irq);
+                gpio_free(c->gpio_irq);
 err_iounmap:
         iounmap(c->onenand.base);
 err_release_mem_region:
@@ -761,7 +761,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
         platform_set_drvdata(pdev, NULL);
         if (c->gpio_irq) {
                 free_irq(gpio_to_irq(c->gpio_irq), c);
-                omap_free_gpio(c->gpio_irq);
+                gpio_free(c->gpio_irq);
         }
         iounmap(c->onenand.base);
         release_mem_region(c->phys_base, ONENAND_IO_SIZE);
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index 0c628a9e5339..c2d012fcc29b 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -208,9 +208,9 @@ am79c961_init_for_open(struct net_device *dev)
         /*
          * Stop the chip.
          */
-        spin_lock_irqsave(priv->chip_lock, flags);
+        spin_lock_irqsave(&priv->chip_lock, flags);
         write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP);
-        spin_unlock_irqrestore(priv->chip_lock, flags);
+        spin_unlock_irqrestore(&priv->chip_lock, flags);
 
         write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */
         write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */
@@ -332,10 +332,10 @@ am79c961_close(struct net_device *dev)
         netif_stop_queue(dev);
         netif_carrier_off(dev);
 
-        spin_lock_irqsave(priv->chip_lock, flags);
+        spin_lock_irqsave(&priv->chip_lock, flags);
         write_rreg (dev->base_addr, CSR0, CSR0_STOP);
         write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
-        spin_unlock_irqrestore(priv->chip_lock, flags);
+        spin_unlock_irqrestore(&priv->chip_lock, flags);
 
         free_irq (dev->irq, dev);
 
@@ -391,7 +391,7 @@ static void am79c961_setmulticastlist (struct net_device *dev)
                         am79c961_mc_hash(dmi, multi_hash);
         }
 
-        spin_lock_irqsave(priv->chip_lock, flags);
+        spin_lock_irqsave(&priv->chip_lock, flags);
 
         stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP;
 
@@ -405,9 +405,9 @@ static void am79c961_setmulticastlist (struct net_device *dev)
                  * Spin waiting for chip to report suspend mode
                  */
                 while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) == 0) {
-                        spin_unlock_irqrestore(priv->chip_lock, flags);
+                        spin_unlock_irqrestore(&priv->chip_lock, flags);
                         nop();
-                        spin_lock_irqsave(priv->chip_lock, flags);
+                        spin_lock_irqsave(&priv->chip_lock, flags);
                 }
         }
 
@@ -429,7 +429,7 @@ static void am79c961_setmulticastlist (struct net_device *dev)
                 write_rreg(dev->base_addr, CTRL1, 0);
         }
 
-        spin_unlock_irqrestore(priv->chip_lock, flags);
+        spin_unlock_irqrestore(&priv->chip_lock, flags);
 }
 
 static void am79c961_timeout(struct net_device *dev)
@@ -467,10 +467,10 @@ am79c961_sendpacket(struct sk_buff *skb, struct net_device *dev)
         am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP);
         priv->txhead = head;
 
-        spin_lock_irqsave(priv->chip_lock, flags);
+        spin_lock_irqsave(&priv->chip_lock, flags);
         write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA);
         dev->trans_start = jiffies;
-        spin_unlock_irqrestore(priv->chip_lock, flags);
+        spin_unlock_irqrestore(&priv->chip_lock, flags);
 
         /*
          * If the next packet is owned by the ethernet device,
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 21764bfc048e..71f81c79d638 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -57,8 +57,8 @@
 #include "bnx2x.h"
 #include "bnx2x_init.h"
 
-#define DRV_MODULE_VERSION      "1.45.24"
-#define DRV_MODULE_RELDATE      "2009/01/14"
+#define DRV_MODULE_VERSION      "1.45.26"
+#define DRV_MODULE_RELDATE      "2009/01/26"
 #define BNX2X_BC_VER            0x040200
 
 /* Time in jiffies before concluding the transmitter is hung */
@@ -740,8 +740,15 @@ static inline int bnx2x_has_tx_work(struct bnx2x_fastpath *fp)
         /* Tell compiler that status block fields can change */
         barrier();
         tx_cons_sb = le16_to_cpu(*fp->tx_cons_sb);
-        return ((fp->tx_pkt_prod != tx_cons_sb) ||
-                (fp->tx_pkt_prod != fp->tx_pkt_cons));
+        return (fp->tx_pkt_cons != tx_cons_sb);
+}
+
+static inline int bnx2x_has_tx_work_unload(struct bnx2x_fastpath *fp)
+{
+        /* Tell compiler that consumer and producer can change */
+        barrier();
+        return (fp->tx_pkt_prod != fp->tx_pkt_cons);
+
 }
 
 /* free skb in the packet ring at pos idx
@@ -5148,12 +5155,21 @@ static void enable_blocks_attention(struct bnx2x *bp)
 }
 
 
+static void bnx2x_reset_common(struct bnx2x *bp)
+{
+        /* reset_common */
+        REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
+               0xd3ffff7f);
+        REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403);
+}
+
 static int bnx2x_init_common(struct bnx2x *bp)
 {
         u32 val, i;
 
         DP(BNX2X_MSG_MCP, "starting common init  func %d\n", BP_FUNC(bp));
 
+        bnx2x_reset_common(bp);
         REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
         REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 0xfffc);
 
@@ -6134,8 +6150,8 @@ static void bnx2x_netif_start(struct bnx2x *bp)
 static void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw)
 {
         bnx2x_int_disable_sync(bp, disable_hw);
+        bnx2x_napi_disable(bp);
         if (netif_running(bp->dev)) {
-                bnx2x_napi_disable(bp);
                 netif_tx_disable(bp->dev);
                 bp->dev->trans_start = jiffies; /* prevent tx timeout */
         }
@@ -6319,7 +6335,7 @@ static void bnx2x_set_rx_mode(struct net_device *dev);
 static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 {
         u32 load_code;
-        int i, rc;
+        int i, rc = 0;
 #ifdef BNX2X_STOP_ON_ERROR
         if (unlikely(bp->panic))
                 return -EPERM;
@@ -6327,48 +6343,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 
         bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
 
-        /* Send LOAD_REQUEST command to MCP
-           Returns the type of LOAD command:
-           if it is the first port to be initialized
-           common blocks should be initialized, otherwise - not
-        */
-        if (!BP_NOMCP(bp)) {
-                load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
-                if (!load_code) {
-                        BNX2X_ERR("MCP response failure, aborting\n");
-                        return -EBUSY;
-                }
-                if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED)
-                        return -EBUSY; /* other port in diagnostic mode */
-
-        } else {
-                int port = BP_PORT(bp);
-
-                DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n",
-                   load_count[0], load_count[1], load_count[2]);
-                load_count[0]++;
-                load_count[1 + port]++;
-                DP(NETIF_MSG_IFUP, "NO MCP new load counts       %d, %d, %d\n",
-                   load_count[0], load_count[1], load_count[2]);
-                if (load_count[0] == 1)
-                        load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
-                else if (load_count[1 + port] == 1)
-                        load_code = FW_MSG_CODE_DRV_LOAD_PORT;
-                else
-                        load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
-        }
-
-        if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
-            (load_code == FW_MSG_CODE_DRV_LOAD_PORT))
-                bp->port.pmf = 1;
-        else
-                bp->port.pmf = 0;
-        DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
-
-        /* if we can't use MSI-X we only need one fp,
-         * so try to enable MSI-X with the requested number of fp's
-         * and fallback to inta with one fp
-         */
         if (use_inta) {
                 bp->num_queues = 1;
 
@@ -6383,7 +6357,15 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                 else
                         bp->num_queues = 1;
 
-                if (bnx2x_enable_msix(bp)) {
+                DP(NETIF_MSG_IFUP,
+                   "set number of queues to %d\n", bp->num_queues);
+
+                /* if we can't use MSI-X we only need one fp,
+                 * so try to enable MSI-X with the requested number of fp's
+                 * and fallback to MSI or legacy INTx with one fp
+                 */
+                rc = bnx2x_enable_msix(bp);
+                if (rc) {
                         /* failed to enable MSI-X */
                         bp->num_queues = 1;
                         if (use_multi)
@@ -6391,8 +6373,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                                           " to enable MSI-X\n");
                 }
         }
-        DP(NETIF_MSG_IFUP,
-           "set number of queues to %d\n", bp->num_queues);
 
         if (bnx2x_alloc_mem(bp))
                 return -ENOMEM;
@@ -6401,30 +6381,85 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                 bnx2x_fp(bp, i, disable_tpa) =
                                         ((bp->flags & TPA_ENABLE_FLAG) == 0);
 
+        for_each_queue(bp, i)
+                netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
+                               bnx2x_poll, 128);
+
+#ifdef BNX2X_STOP_ON_ERROR
+        for_each_queue(bp, i) {
+                struct bnx2x_fastpath *fp = &bp->fp[i];
+
+                fp->poll_no_work = 0;
+                fp->poll_calls = 0;
+                fp->poll_max_calls = 0;
+                fp->poll_complete = 0;
+                fp->poll_exit = 0;
+        }
+#endif
+        bnx2x_napi_enable(bp);
+
         if (bp->flags & USING_MSIX_FLAG) {
                 rc = bnx2x_req_msix_irqs(bp);
                 if (rc) {
                         pci_disable_msix(bp->pdev);
-                        goto load_error;
+                        goto load_error1;
                 }
+                printk(KERN_INFO PFX "%s: using MSI-X\n", bp->dev->name);
         } else {
                 bnx2x_ack_int(bp);
                 rc = bnx2x_req_irq(bp);
                 if (rc) {
-                        BNX2X_ERR("IRQ request failed, aborting\n");
-                        goto load_error;
+                        BNX2X_ERR("IRQ request failed  rc %d, aborting\n", rc);
+                        goto load_error1;
                 }
         }
 
-        for_each_queue(bp, i)
-                netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
-                               bnx2x_poll, 128);
+        /* Send LOAD_REQUEST command to MCP
+           Returns the type of LOAD command:
+           if it is the first port to be initialized
+           common blocks should be initialized, otherwise - not
+        */
+        if (!BP_NOMCP(bp)) {
+                load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
+                if (!load_code) {
+                        BNX2X_ERR("MCP response failure, aborting\n");
+                        rc = -EBUSY;
+                        goto load_error2;
+                }
+                if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) {
+                        rc = -EBUSY; /* other port in diagnostic mode */
+                        goto load_error2;
+                }
+
+        } else {
+                int port = BP_PORT(bp);
+
+                DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n",
+                   load_count[0], load_count[1], load_count[2]);
+                load_count[0]++;
+                load_count[1 + port]++;
+                DP(NETIF_MSG_IFUP, "NO MCP new load counts       %d, %d, %d\n",
+                   load_count[0], load_count[1], load_count[2]);
+                if (load_count[0] == 1)
+                        load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
+                else if (load_count[1 + port] == 1)
+                        load_code = FW_MSG_CODE_DRV_LOAD_PORT;
+                else
+                        load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
+        }
+
+        if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
+            (load_code == FW_MSG_CODE_DRV_LOAD_PORT))
+                bp->port.pmf = 1;
+        else
+                bp->port.pmf = 0;
+        DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
 
         /* Initialize HW */
         rc = bnx2x_init_hw(bp, load_code);
         if (rc) {
                 BNX2X_ERR("HW init failed, aborting\n");
-                goto load_int_disable;
+                goto load_error2;
         }
 
         /* Setup NIC internals and enable interrupts */
@@ -6436,7 +6471,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                 if (!load_code) {
                         BNX2X_ERR("MCP response failure, aborting\n");
                         rc = -EBUSY;
-                        goto load_rings_free;
+                        goto load_error3;
                 }
         }
 
@@ -6445,7 +6480,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
         rc = bnx2x_setup_leading(bp);
         if (rc) {
                 BNX2X_ERR("Setup leading failed!\n");
-                goto load_netif_stop;
+                goto load_error3;
         }
 
         if (CHIP_IS_E1H(bp))
@@ -6458,7 +6493,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                 for_each_nondefault_queue(bp, i) {
                         rc = bnx2x_setup_multi(bp, i);
                         if (rc)
-                                goto load_netif_stop;
+                                goto load_error3;
                 }
 
         if (CHIP_IS_E1(bp))
@@ -6474,18 +6509,18 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
         case LOAD_NORMAL:
                 /* Tx queue should be only reenabled */
                 netif_wake_queue(bp->dev);
+                /* Initialize the receive filter. */
                 bnx2x_set_rx_mode(bp->dev);
                 break;
 
         case LOAD_OPEN:
                 netif_start_queue(bp->dev);
+                /* Initialize the receive filter. */
                 bnx2x_set_rx_mode(bp->dev);
-                if (bp->flags & USING_MSIX_FLAG)
-                        printk(KERN_INFO PFX "%s: using MSI-X\n",
-                               bp->dev->name);
                 break;
 
         case LOAD_DIAG:
+                /* Initialize the receive filter. */
                 bnx2x_set_rx_mode(bp->dev);
                 bp->state = BNX2X_STATE_DIAG;
                 break;
@@ -6503,20 +6538,25 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 
         return 0;
 
-load_netif_stop:
-        bnx2x_napi_disable(bp);
-load_rings_free:
+load_error3:
+        bnx2x_int_disable_sync(bp, 1);
+        if (!BP_NOMCP(bp)) {
+                bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP);
+                bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+        }
+        bp->port.pmf = 0;
         /* Free SKBs, SGEs, TPA pool and driver internals */
         bnx2x_free_skbs(bp);
         for_each_queue(bp, i)
                 bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
-load_int_disable:
-        bnx2x_int_disable_sync(bp, 1);
+load_error2:
         /* Release IRQs */
         bnx2x_free_irq(bp);
-load_error:
+load_error1:
+        bnx2x_napi_disable(bp);
+        for_each_queue(bp, i)
+                netif_napi_del(&bnx2x_fp(bp, i, napi));
         bnx2x_free_mem(bp);
-        bp->port.pmf = 0;
 
         /* TBD we really need to reset the chip
            if we want to recover from this */
@@ -6589,6 +6629,7 @@ static int bnx2x_stop_leading(struct bnx2x *bp)
                 }
                 cnt--;
                 msleep(1);
+                rmb(); /* Refresh the dsb_sp_prod */
         }
         bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD;
         bp->fp[0].state = BNX2X_FP_STATE_CLOSED;
@@ -6640,14 +6681,6 @@ static void bnx2x_reset_port(struct bnx2x *bp)
         /* TODO: Close Doorbell port? */
 }
 
-static void bnx2x_reset_common(struct bnx2x *bp)
-{
-        /* reset_common */
-        REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
-               0xd3ffff7f);
-        REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403);
-}
-
 static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code)
 {
         DP(BNX2X_MSG_MCP, "function %d  reset_code %x\n",
@@ -6688,8 +6721,7 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
         bnx2x_set_storm_rx_mode(bp);
 
         bnx2x_netif_stop(bp, 1);
-        if (!netif_running(bp->dev))
-                bnx2x_napi_disable(bp);
+
         del_timer_sync(&bp->timer);
         SHMEM_WR(bp, func_mb[BP_FUNC(bp)].drv_pulse_mb,
                  (DRV_PULSE_ALWAYS_ALIVE | bp->fw_drv_pulse_wr_seq));
@@ -6704,7 +6736,7 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 
                 cnt = 1000;
                 smp_rmb();
-                while (bnx2x_has_tx_work(fp)) {
+                while (bnx2x_has_tx_work_unload(fp)) {
 
                         bnx2x_tx_int(fp, 1000);
                         if (!cnt) {
@@ -6833,6 +6865,8 @@ unload_error:
         bnx2x_free_skbs(bp);
         for_each_queue(bp, i)
                 bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
+        for_each_queue(bp, i)
+                netif_napi_del(&bnx2x_fp(bp, i, napi));
         bnx2x_free_mem(bp);
 
         bp->state = BNX2X_STATE_CLOSED;
@@ -8723,18 +8757,17 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode, u8 link_up)
 
         if (loopback_mode == BNX2X_MAC_LOOPBACK) {
                 bp->link_params.loopback_mode = LOOPBACK_BMAC;
-                bnx2x_acquire_phy_lock(bp);
                 bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-                bnx2x_release_phy_lock(bp);
 
         } else if (loopback_mode == BNX2X_PHY_LOOPBACK) {
+                u16 cnt = 1000;
                 bp->link_params.loopback_mode = LOOPBACK_XGXS_10;
-                bnx2x_acquire_phy_lock(bp);
                 bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-                bnx2x_release_phy_lock(bp);
                 /* wait until link state is restored */
-                bnx2x_wait_for_link(bp, link_up);
-
+                if (link_up)
+                        while (cnt-- && bnx2x_test_link(&bp->link_params,
+                                                        &bp->link_vars))
+                                msleep(10);
         } else
                 return -EINVAL;
 
@@ -8840,6 +8873,7 @@ static int bnx2x_test_loopback(struct bnx2x *bp, u8 link_up)
                 return BNX2X_LOOPBACK_FAILED;
 
         bnx2x_netif_stop(bp, 1);
+        bnx2x_acquire_phy_lock(bp);
 
         if (bnx2x_run_loopback(bp, BNX2X_MAC_LOOPBACK, link_up)) {
                 DP(NETIF_MSG_PROBE, "MAC loopback failed\n");
@@ -8851,6 +8885,7 @@ static int bnx2x_test_loopback(struct bnx2x *bp, u8 link_up)
                 rc |= BNX2X_PHY_LOOPBACK_FAILED;
         }
 
+        bnx2x_release_phy_lock(bp);
         bnx2x_netif_start(bp);
 
         return rc;
@@ -9805,6 +9840,8 @@ static int bnx2x_open(struct net_device *dev)
 {
         struct bnx2x *bp = netdev_priv(dev);
 
+        netif_carrier_off(dev);
+
         bnx2x_set_power_state(bp, PCI_D0);
 
         return bnx2x_nic_load(bp, LOAD_OPEN);
@@ -10310,8 +10347,6 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
                 goto init_one_exit;
         }
 
-        netif_carrier_off(dev);
-
         bp->common.name = board_info[ent->driver_data].name;
         printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx,"
                " IRQ %d, ", dev->name, bp->common.name,
@@ -10459,6 +10494,8 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
         bnx2x_free_skbs(bp);
         for_each_queue(bp, i)
                 bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
+        for_each_queue(bp, i)
+                netif_napi_del(&bnx2x_fp(bp, i, napi));
         bnx2x_free_mem(bp);
 
         bp->state = BNX2X_STATE_CLOSED;
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index cf43ee743b3c..0890162953e9 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -981,11 +981,15 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
                 ew32(PBA_ECC, reg);
         }
 
-        /* PCI-Ex Control Register */
+        /* PCI-Ex Control Registers */
         if (hw->mac.type == e1000_82574) {
                 reg = er32(GCR);
                 reg |= (1 << 22);
                 ew32(GCR, reg);
+
+                reg = er32(GCR2);
+                reg |= 1;
+                ew32(GCR2, reg);
         }
 
         return;
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index f25e961c6b3b..2d4ce0492df0 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -206,6 +206,7 @@ enum e1e_registers {
         E1000_MANC2H    = 0x05860, /* Management Control To Host - RW */
         E1000_SW_FW_SYNC = 0x05B5C, /* Software-Firmware Synchronization - RW */
         E1000_GCR       = 0x05B00, /* PCI-Ex Control */
+        E1000_GCR2      = 0x05B64, /* PCI-Ex Control #2 */
         E1000_FACTPS    = 0x05B30, /* Function Active and Power State to MNG */
         E1000_SWSM      = 0x05B50, /* SW Semaphore */
         E1000_FWSM      = 0x05B54, /* FW Semaphore */
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 2e76699f8104..f5e6068f9b07 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1423,15 +1423,11 @@ static void gfar_vlan_rx_register(struct net_device *dev,
 {
         struct gfar_private *priv = netdev_priv(dev);
         unsigned long flags;
-        struct vlan_group *old_grp;
         u32 tempval;
 
         spin_lock_irqsave(&priv->rxlock, flags);
 
-        old_grp = priv->vlgrp;
-
-        if (old_grp == grp)
-                return;
+        priv->vlgrp = grp;
 
         if (grp) {
                 /* Enable VLAN tag insertion */
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index c11c568fd7db..a75a31005fd3 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -146,7 +146,7 @@
 
 #define MAX_RX_BUFFER_LENGTH            1760
 #define MAX_RX_JUMBO_BUFFER_LENGTH      8062
-#define MAX_RX_LRO_BUFFER_LENGTH        ((48*1024)-512)
+#define MAX_RX_LRO_BUFFER_LENGTH        (8062)
 #define RX_DMA_MAP_LEN                  (MAX_RX_BUFFER_LENGTH - 2)
 #define RX_JUMBO_DMA_MAP_LEN    \
         (MAX_RX_JUMBO_BUFFER_LENGTH - 2)
@@ -207,11 +207,11 @@
 
 #define MAX_CMD_DESCRIPTORS             4096
 #define MAX_RCV_DESCRIPTORS             16384
-#define MAX_CMD_DESCRIPTORS_HOST        (MAX_CMD_DESCRIPTORS / 4)
-#define MAX_RCV_DESCRIPTORS_1G          (MAX_RCV_DESCRIPTORS / 4)
-#define MAX_RCV_DESCRIPTORS_10G         8192
-#define MAX_JUMBO_RCV_DESCRIPTORS       1024
-#define MAX_LRO_RCV_DESCRIPTORS         64
+#define MAX_CMD_DESCRIPTORS_HOST        1024
+#define MAX_RCV_DESCRIPTORS_1G          2048
+#define MAX_RCV_DESCRIPTORS_10G         4096
+#define MAX_JUMBO_RCV_DESCRIPTORS       512
+#define MAX_LRO_RCV_DESCRIPTORS         8
 #define MAX_RCVSTATUS_DESCRIPTORS       MAX_RCV_DESCRIPTORS
 #define MAX_JUMBO_RCV_DESC      MAX_JUMBO_RCV_DESCRIPTORS
 #define MAX_RCV_DESC            MAX_RCV_DESCRIPTORS
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index c0bd40fcf708..0894a7be0225 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -561,7 +561,10 @@ netxen_nic_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
         }
         ring->tx_pending = adapter->max_tx_desc_count;
 
-        ring->rx_max_pending = MAX_RCV_DESCRIPTORS;
+        if (adapter->ahw.board_type == NETXEN_NIC_GBE)
+                ring->rx_max_pending = MAX_RCV_DESCRIPTORS_1G;
+        else
+                ring->rx_max_pending = MAX_RCV_DESCRIPTORS_10G;
         ring->tx_max_pending = MAX_CMD_DESCRIPTORS_HOST;
         ring->rx_jumbo_max_pending = MAX_JUMBO_RCV_DESCRIPTORS;
         ring->rx_mini_max_pending = 0;
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 1139e637f5da..cc06cc5429fe 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -735,17 +735,18 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
         SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops);
 
-        /* ScatterGather support */
-        netdev->features = NETIF_F_SG;
-        netdev->features |= NETIF_F_IP_CSUM;
-        netdev->features |= NETIF_F_TSO;
+        netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+        netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+
         if (NX_IS_REVISION_P3(revision_id)) {
-                netdev->features |= NETIF_F_IPV6_CSUM;
-                netdev->features |= NETIF_F_TSO6;
+                netdev->features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
+                netdev->vlan_features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
         }
 
-        if (adapter->pci_using_dac)
+        if (adapter->pci_using_dac) {
                 netdev->features |= NETIF_F_HIGHDMA;
+                netdev->vlan_features |= NETIF_F_HIGHDMA;
+        }
 
         /*
          * Set the CRB window to invalid. If any register in window 0 is
@@ -1166,6 +1167,14 @@ static bool netxen_tso_check(struct net_device *netdev,
 {
         bool tso = false;
         u8 opcode = TX_ETHER_PKT;
+        __be16 protocol = skb->protocol;
+        u16 flags = 0;
+
+        if (protocol == __constant_htons(ETH_P_8021Q)) {
+                struct vlan_ethhdr *vh = (struct vlan_ethhdr *)skb->data;
+                protocol = vh->h_vlan_encapsulated_proto;
+                flags = FLAGS_VLAN_TAGGED;
+        }
 
         if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
                         skb_shinfo(skb)->gso_size > 0) {
@@ -1174,21 +1183,21 @@ static bool netxen_tso_check(struct net_device *netdev,
                 desc->total_hdr_length =
                         skb_transport_offset(skb) + tcp_hdrlen(skb);
 
-                opcode = (skb->protocol == htons(ETH_P_IPV6)) ?
+                opcode = (protocol == __constant_htons(ETH_P_IPV6)) ?
                                 TX_TCP_LSO6 : TX_TCP_LSO;
                 tso = true;
 
         } else if (skb->ip_summed == CHECKSUM_PARTIAL) {
                 u8 l4proto;
 
-                if (skb->protocol == htons(ETH_P_IP)) {
+                if (protocol == __constant_htons(ETH_P_IP)) {
                         l4proto = ip_hdr(skb)->protocol;
 
                         if (l4proto == IPPROTO_TCP)
                                 opcode = TX_TCP_PKT;
                         else if(l4proto == IPPROTO_UDP)
                                 opcode = TX_UDP_PKT;
-                } else if (skb->protocol == htons(ETH_P_IPV6)) {
+                } else if (protocol == __constant_htons(ETH_P_IPV6)) {
                         l4proto = ipv6_hdr(skb)->nexthdr;
 
                         if (l4proto == IPPROTO_TCP)
@@ -1199,7 +1208,7 @@ static bool netxen_tso_check(struct net_device *netdev,
         }
         desc->tcp_hdr_offset = skb_transport_offset(skb);
         desc->ip_hdr_offset = skb_network_offset(skb);
-        netxen_set_tx_flags_opcode(desc, 0, opcode);
+        netxen_set_tx_flags_opcode(desc, flags, opcode);
         return tso;
 }
 
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 11adf6ed4628..811a637695ca 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -296,9 +296,8 @@ static int mdio_bus_suspend(struct device * dev, pm_message_t state)
         struct phy_driver *phydrv = to_phy_driver(drv);
         struct phy_device *phydev = to_phy_device(dev);
 
-        if ((!device_may_wakeup(phydev->dev.parent)) &&
-                (phydrv && phydrv->suspend))
-                        ret = phydrv->suspend(phydev);
+        if (drv && phydrv->suspend && !device_may_wakeup(phydev->dev.parent))
+                ret = phydrv->suspend(phydev);
 
         return ret;
 }
@@ -310,8 +309,7 @@ static int mdio_bus_resume(struct device * dev)
         struct phy_driver *phydrv = to_phy_driver(drv);
         struct phy_device *phydev = to_phy_device(dev);
 
-        if ((!device_may_wakeup(phydev->dev.parent)) &&
-                (phydrv && phydrv->resume))
+        if (drv && phydrv->resume && !device_may_wakeup(phydev->dev.parent))
                 ret = phydrv->resume(phydev);
 
         return ret;
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index c05d38d46350..1387187543e4 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -81,6 +81,9 @@ static struct phy_driver lan83c185_driver = {
         .ack_interrupt  = smsc_phy_ack_interrupt,
         .config_intr    = smsc_phy_config_intr,
 
+        .suspend        = genphy_suspend,
+        .resume         = genphy_resume,
+
         .driver         = { .owner = THIS_MODULE, }
 };
 
@@ -102,6 +105,9 @@ static struct phy_driver lan8187_driver = {
         .ack_interrupt  = smsc_phy_ack_interrupt,
         .config_intr    = smsc_phy_config_intr,
 
+        .suspend        = genphy_suspend,
+        .resume         = genphy_resume,
+
         .driver         = { .owner = THIS_MODULE, }
 };
 
@@ -123,6 +129,9 @@ static struct phy_driver lan8700_driver = {
         .ack_interrupt  = smsc_phy_ack_interrupt,
         .config_intr    = smsc_phy_config_intr,
 
+        .suspend        = genphy_suspend,
+        .resume         = genphy_resume,
+
         .driver         = { .owner = THIS_MODULE, }
 };
 
@@ -144,6 +153,9 @@ static struct phy_driver lan911x_int_driver = {
         .ack_interrupt  = smsc_phy_ack_interrupt,
         .config_intr    = smsc_phy_config_intr,
 
+        .suspend        = genphy_suspend,
+        .resume         = genphy_resume,
+
         .driver         = { .owner = THIS_MODULE, }
 };
 
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 9b33d6ebf542..3b6225a2c7d2 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -24,6 +24,7 @@
 #include <linux/virtio.h>
 #include <linux/virtio_net.h>
 #include <linux/scatterlist.h>
+#include <linux/if_vlan.h>
 
 static int napi_weight = 128;
 module_param(napi_weight, int, 0444);
@@ -33,7 +34,7 @@ module_param(csum, bool, 0444);
 module_param(gso, bool, 0444);
 
 /* FIXME: MTU in config. */
-#define MAX_PACKET_LEN (ETH_HLEN+ETH_DATA_LEN)
+#define MAX_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN)
 #define GOOD_COPY_LEN   128
 
 struct virtnet_info
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index 9b60a0c5de5f..21c841847d88 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -638,12 +638,16 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
         s8 scale_action = 0;
         unsigned long flags;
         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-        u16 fc, rate_mask;
+        u16 fc;
+        u16 rate_mask = 0;
         struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_r;
         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 
         IWL_DEBUG_RATE("enter\n");
 
+        if (sta)
+                rate_mask = sta->supp_rates[sband->band];
+
         /* Send management frames and broadcast/multicast data using lowest
          * rate. */
         fc = le16_to_cpu(hdr->frame_control);
@@ -651,11 +655,15 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
             is_multicast_ether_addr(hdr->addr1) ||
             !sta || !priv_sta) {
                 IWL_DEBUG_RATE("leave: No STA priv data to update!\n");
-                info->control.rates[0].idx = rate_lowest_index(sband, sta);
+                if (!rate_mask)
+                        info->control.rates[0].idx =
+                                        rate_lowest_index(sband, NULL);
+                else
+                        info->control.rates[0].idx =
+                                        rate_lowest_index(sband, sta);
                 return;
         }
 
-        rate_mask = sta->supp_rates[sband->band];
         index = min(rs_sta->last_txrate_idx & 0xffff, IWL_RATE_COUNT - 1);
 
         if (sband->band == IEEE80211_BAND_5GHZ)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index f3f17929ca0b..27f50471aed8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -944,7 +944,8 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
         }
 
         /* See if there's a better rate or modulation mode to try. */
-        rs_rate_scale_perform(priv, hdr, sta, lq_sta);
+        if (sta && sta->supp_rates[sband->band])
+                rs_rate_scale_perform(priv, hdr, sta, lq_sta);
 out:
         return;
 }
@@ -2101,14 +2102,23 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta,
         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
         struct iwl_lq_sta *lq_sta = priv_sta;
         int rate_idx;
+        u64 mask_bit = 0;
 
         IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n");
 
+        if (sta)
+                mask_bit = sta->supp_rates[sband->band];
+
         /* Send management frames and broadcast/multicast data using lowest
          * rate. */
         if (!ieee80211_is_data(hdr->frame_control) ||
             is_multicast_ether_addr(hdr->addr1) || !sta || !lq_sta) {
-                info->control.rates[0].idx = rate_lowest_index(sband, sta);
+                if (!mask_bit)
+                        info->control.rates[0].idx =
+                                        rate_lowest_index(sband, NULL);
+                else
+                        info->control.rates[0].idx =
+                                        rate_lowest_index(sband, sta);
                 return;
         }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 5da6b35cd26d..0dc8eed16404 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2482,7 +2482,7 @@ static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
                 dev_kfree_skb_any(skb);
 
         IWL_DEBUG_MACDUMP("leave\n");
-        return 0;
+        return NETDEV_TX_OK;
 }
 
 static int iwl_mac_add_interface(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 15f5655c636e..95d01984c80e 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -6538,7 +6538,7 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
                 dev_kfree_skb_any(skb);
 
         IWL_DEBUG_MAC80211("leave\n");
-        return 0;
+        return NETDEV_TX_OK;
 }
 
 static int iwl3945_mac_add_interface(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c
index c3bb85e0251e..45a04faa7818 100644
--- a/drivers/net/wireless/orinoco/orinoco.c
+++ b/drivers/net/wireless/orinoco/orinoco.c
@@ -1673,7 +1673,7 @@ static void print_linkstatus(struct net_device *dev, u16 status)
                 s = "UNKNOWN";
         }
         
-        printk(KERN_INFO "%s: New link status: %s (%04x)\n",
+        printk(KERN_DEBUG "%s: New link status: %s (%04x)\n",
                dev->name, s, status);
 }
 
@@ -5068,33 +5068,30 @@ static int orinoco_ioctl_set_genie(struct net_device *dev,
         struct orinoco_private *priv = netdev_priv(dev);
         u8 *buf;
         unsigned long flags;
-        int err = 0;
 
         /* cut off at IEEE80211_MAX_DATA_LEN */
         if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) ||
             (wrqu->data.length && (extra == NULL)))
                 return -EINVAL;
 
-        if (orinoco_lock(priv, &flags) != 0)
-                return -EBUSY;
-
         if (wrqu->data.length) {
                 buf = kmalloc(wrqu->data.length, GFP_KERNEL);
-                if (buf == NULL) {
-                        err = -ENOMEM;
-                        goto out;
-                }
+                if (buf == NULL)
+                        return -ENOMEM;
 
                 memcpy(buf, extra, wrqu->data.length);
-                kfree(priv->wpa_ie);
-                priv->wpa_ie = buf;
-                priv->wpa_ie_len = wrqu->data.length;
-        } else {
-                kfree(priv->wpa_ie);
-                priv->wpa_ie = NULL;
-                priv->wpa_ie_len = 0;
+        } else
+                buf = NULL;
+
+        if (orinoco_lock(priv, &flags) != 0) {
+                kfree(buf);
+                return -EBUSY;
         }
 
+        kfree(priv->wpa_ie);
+        priv->wpa_ie = buf;
+        priv->wpa_ie_len = wrqu->data.length;
+
         if (priv->wpa_ie) {
                 /* Looks like wl_lkm wants to check the auth alg, and
                  * somehow pass it to the firmware.
@@ -5103,9 +5100,8 @@ static int orinoco_ioctl_set_genie(struct net_device *dev,
                  */
         }
 
-out:
         orinoco_unlock(priv, &flags);
-        return err;
+        return 0;
 }
 
 static int orinoco_ioctl_get_genie(struct net_device *dev,
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 12d0717c3992..34561e6e816b 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -451,8 +451,8 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
                         }
                         if (err)
                                 goto err;
-
-                }
+                        }
+                        break;
                 case PDR_PRISM_ZIF_TX_IQ_CALIBRATION:
                         priv->iq_autocal = kmalloc(data_len, GFP_KERNEL);
                         if (!priv->iq_autocal) {
@@ -745,7 +745,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
                 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
                 struct p54_hdr *entry_hdr;
                 struct p54_tx_data *entry_data;
-                int pad = 0;
+                unsigned int pad = 0, frame_len;
 
                 range = (void *)info->rate_driver_data;
                 if (range->start_addr != addr) {
@@ -768,6 +768,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
                 __skb_unlink(entry, &priv->tx_queue);
                 spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 
+                frame_len = entry->len;
                 entry_hdr = (struct p54_hdr *) entry->data;
                 entry_data = (struct p54_tx_data *) entry_hdr->data;
                 priv->tx_stats[entry_data->hw_queue].len--;
@@ -814,15 +815,28 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
                 info->status.ack_signal = p54_rssi_to_dbm(dev,
                                 (int)payload->ack_rssi);
 
-                if (entry_data->key_type == P54_CRYPTO_TKIPMICHAEL) {
+                /* Undo all changes to the frame. */
+                switch (entry_data->key_type) {
+                case P54_CRYPTO_TKIPMICHAEL: {
                         u8 *iv = (u8 *)(entry_data->align + pad +
-                                        entry_data->crypt_offset);
+                                        entry_data->crypt_offset);
 
                         /* Restore the original TKIP IV. */
                         iv[2] = iv[0];
                         iv[0] = iv[1];
                         iv[1] = (iv[0] | 0x20) & 0x7f;  /* WEPSeed - 8.3.2.2 */
+
+                        frame_len -= 12; /* remove TKIP_MMIC + TKIP_ICV */
+                        break;
+                        }
+                case P54_CRYPTO_AESCCMP:
+                        frame_len -= 8; /* remove CCMP_MIC */
+                        break;
+                case P54_CRYPTO_WEP:
+                        frame_len -= 4; /* remove WEP_ICV */
+                        break;
                 }
+                skb_trim(entry, frame_len);
                 skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data));
                 ieee80211_tx_status_irqsafe(dev, entry);
                 goto out;
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 6a6a72f6f82c..5de2ebfb28c7 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -144,11 +144,8 @@ static void p54u_tx_cb(struct urb *urb)
         struct sk_buff *skb = urb->context;
         struct ieee80211_hw *dev = (struct ieee80211_hw *)
                 usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
-        struct p54u_priv *priv = dev->priv;
 
-        skb_pull(skb, priv->common.tx_hdr_len);
-        if (FREE_AFTER_TX(skb))
-                p54_free_skb(dev, skb);
+        p54_free_skb(dev, skb);
 }
 
 static void p54u_tx_dummy_cb(struct urb *urb) { }
@@ -230,7 +227,10 @@ static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb)
                           p54u_tx_dummy_cb, dev);
         usb_fill_bulk_urb(data_urb, priv->udev,
                           usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-                          skb->data, skb->len, p54u_tx_cb, skb);
+                          skb->data, skb->len, FREE_AFTER_TX(skb) ?
+                          p54u_tx_cb : p54u_tx_dummy_cb, skb);
+        addr_urb->transfer_flags |= URB_ZERO_PACKET;
+        data_urb->transfer_flags |= URB_ZERO_PACKET;
 
         usb_anchor_urb(addr_urb, &priv->submitted);
         err = usb_submit_urb(addr_urb, GFP_ATOMIC);
@@ -239,7 +239,7 @@ static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb)
                 goto out;
         }
 
-        usb_anchor_urb(addr_urb, &priv->submitted);
+        usb_anchor_urb(data_urb, &priv->submitted);
         err = usb_submit_urb(data_urb, GFP_ATOMIC);
         if (err)
                 usb_unanchor_urb(data_urb);
@@ -269,28 +269,24 @@ static void p54u_tx_lm87(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
         struct p54u_priv *priv = dev->priv;
         struct urb *data_urb;
-        struct lm87_tx_hdr *hdr;
-        __le32 checksum;
-        __le32 addr = ((struct p54_hdr *)skb->data)->req_id;
+        struct lm87_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr);
 
         data_urb = usb_alloc_urb(0, GFP_ATOMIC);
         if (!data_urb)
                 return;
 
-        checksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len);
-        hdr = (struct lm87_tx_hdr *)skb_push(skb, sizeof(*hdr));
-        hdr->chksum = checksum;
-        hdr->device_addr = addr;
+        hdr->chksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len);
+        hdr->device_addr = ((struct p54_hdr *)skb->data)->req_id;
 
         usb_fill_bulk_urb(data_urb, priv->udev,
                           usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-                          skb->data, skb->len, p54u_tx_cb, skb);
+                          hdr, skb->len + sizeof(*hdr),  FREE_AFTER_TX(skb) ?
+                          p54u_tx_cb : p54u_tx_dummy_cb, skb);
         data_urb->transfer_flags |= URB_ZERO_PACKET;
 
         usb_anchor_urb(data_urb, &priv->submitted);
         if (usb_submit_urb(data_urb, GFP_ATOMIC)) {
                 usb_unanchor_urb(data_urb);
-                skb_pull(skb, sizeof(*hdr));
                 p54_free_skb(dev, skb);
         }
         usb_free_urb(data_urb);
@@ -300,11 +296,9 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
         struct p54u_priv *priv = dev->priv;
         struct urb *int_urb, *data_urb;
-        struct net2280_tx_hdr *hdr;
+        struct net2280_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr);
         struct net2280_reg_write *reg;
         int err = 0;
-        __le32 addr = ((struct p54_hdr *) skb->data)->req_id;
-        __le16 len = cpu_to_le16(skb->len);
 
         reg = kmalloc(sizeof(*reg), GFP_ATOMIC);
         if (!reg)
@@ -327,10 +321,9 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb)
         reg->addr = cpu_to_le32(P54U_DEV_BASE);
         reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA);
 
-        hdr = (void *)skb_push(skb, sizeof(*hdr));
         memset(hdr, 0, sizeof(*hdr));
-        hdr->len = len;
-        hdr->device_addr = addr;
+        hdr->len = cpu_to_le16(skb->len);
+        hdr->device_addr = ((struct p54_hdr *) skb->data)->req_id;
 
         usb_fill_bulk_urb(int_urb, priv->udev,
                 usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV), reg, sizeof(*reg),
@@ -341,11 +334,13 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb)
          * free what's inside the transfer_buffer after the callback routine
          * has completed.
          */
-        int_urb->transfer_flags |= URB_FREE_BUFFER;
+        int_urb->transfer_flags |= URB_FREE_BUFFER | URB_ZERO_PACKET;
 
         usb_fill_bulk_urb(data_urb, priv->udev,
                           usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-                          skb->data, skb->len, p54u_tx_cb, skb);
+                          hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ?
+                          p54u_tx_cb : p54u_tx_dummy_cb, skb);
+        data_urb->transfer_flags |= URB_ZERO_PACKET;
 
         usb_anchor_urb(int_urb, &priv->submitted);
         err = usb_submit_urb(int_urb, GFP_ATOMIC);
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 746a8f36b931..0709decec9c2 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -154,6 +154,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
         struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
+        struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
         struct ieee80211_rate *rate =
             ieee80211_get_tx_rate(rt2x00dev->hw, tx_info);
         const struct rt2x00_rate *hwrate;
@@ -313,7 +314,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
                  * When preamble is enabled we should set the
                  * preamble bit for the signal.
                  */
-                if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+                if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
                         txdesc->signal |= 0x08;
         }
 }
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 6ad6bac37706..22bc07ef2f37 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -273,6 +273,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 
         usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep),
                           buf, skb->len, rtl8187_tx_cb, skb);
+        urb->transfer_flags |= URB_ZERO_PACKET;
         usb_anchor_urb(urb, &priv->anchored);
         rc = usb_submit_urb(urb, GFP_ATOMIC);
         if (rc < 0) {
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index b5db57d2fcf5..17527f765b39 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -84,6 +84,7 @@ static struct usb_device_id usb_ids[] = {
         { USB_DEVICE(0x0586, 0x340a), .driver_info = DEVICE_ZD1211B },
         { USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
         { USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B },
+        { USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B },
         /* "Driverless" devices that need ejecting */
         { USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
         { USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c
index 2e03b6d796d3..e76d715e4342 100644
--- a/drivers/oprofile/cpu_buffer.c
+++ b/drivers/oprofile/cpu_buffer.c
@@ -393,16 +393,21 @@ oprofile_write_reserve(struct op_entry *entry, struct pt_regs * const regs,
         return;
 
 fail:
+        entry->event = NULL;
         cpu_buf->sample_lost_overflow++;
 }
 
 int oprofile_add_data(struct op_entry *entry, unsigned long val)
 {
+        if (!entry->event)
+                return 0;
         return op_cpu_buffer_add_data(entry, val);
 }
 
 int oprofile_write_commit(struct op_entry *entry)
 {
+        if (!entry->event)
+                return -EINVAL;
         return op_cpu_buffer_write_commit(entry);
 }
 
diff --git a/drivers/oprofile/cpu_buffer.h b/drivers/oprofile/cpu_buffer.h
index 63f81c44846a..272995d20293 100644
--- a/drivers/oprofile/cpu_buffer.h
+++ b/drivers/oprofile/cpu_buffer.h
@@ -66,6 +66,13 @@ static inline void op_cpu_buffer_reset(int cpu)
         cpu_buf->last_task = NULL;
 }
 
+/*
+ * op_cpu_buffer_add_data() and op_cpu_buffer_write_commit() may be
+ * called only if op_cpu_buffer_write_reserve() did not return NULL or
+ * entry->event != NULL, otherwise entry->size or entry->event will be
+ * used uninitialized.
+ */
+
 struct op_sample
 *op_cpu_buffer_write_reserve(struct op_entry *entry, unsigned long size);
 int op_cpu_buffer_write_commit(struct op_entry *entry);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 5482d4ed8256..c2485542f543 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -126,8 +126,10 @@ static int set_lock_status(struct hotplug_slot *hotplug_slot, u8 status)
         mutex_lock(&slot->ctrl->crit_sect);
 
         /* has it been >1 sec since our last toggle? */
-        if ((get_seconds() - slot->last_emi_toggle) < 1)
+        if ((get_seconds() - slot->last_emi_toggle) < 1) {
+                mutex_unlock(&slot->ctrl->crit_sect);
                 return -EINVAL;
+        }
 
         /* see what our current state is */
         retval = get_lock_status(hotplug_slot, &value);
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index b4a90badd0a6..896a15d70f5b 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -398,21 +398,19 @@ static int msi_capability_init(struct pci_dev *dev)
         entry->msi_attrib.masked = 1;
         entry->msi_attrib.default_irq = dev->irq;       /* Save IOAPIC IRQ */
         entry->msi_attrib.pos = pos;
-        if (entry->msi_attrib.maskbit) {
-                entry->mask_base = (void __iomem *)(long)msi_mask_bits_reg(pos,
-                                entry->msi_attrib.is_64);
-        }
         entry->dev = dev;
         if (entry->msi_attrib.maskbit) {
-                unsigned int maskbits, temp;
+                unsigned int base, maskbits, temp;
+
+                base = msi_mask_bits_reg(pos, entry->msi_attrib.is_64);
+                entry->mask_base = (void __iomem *)(long)base;
+
                 /* All MSIs are unmasked by default, Mask them all */
-                pci_read_config_dword(dev,
-                        msi_mask_bits_reg(pos, entry->msi_attrib.is_64),
-                        &maskbits);
+                pci_read_config_dword(dev, base, &maskbits);
                 temp = (1 << multi_msi_capable(control));
                 temp = ((temp - 1) & ~temp);
                 maskbits |= temp;
-                pci_write_config_dword(dev, entry->msi_attrib.is_64, maskbits);
+                pci_write_config_dword(dev, base, maskbits);
                 entry->msi_attrib.maskbits_mask = temp;
         }
         list_add_tail(&entry->list, &dev->msi_list);
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index c697f2680856..9de07b75b993 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -355,17 +355,27 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state)
         int i = 0;
 
         if (drv && drv->suspend) {
+                pci_dev->state_saved = false;
+
                 i = drv->suspend(pci_dev, state);
                 suspend_report_result(drv->suspend, i);
-        } else {
-                pci_save_state(pci_dev);
-                /*
-                 * This is for compatibility with existing code with legacy PM
-                 * support.
-                 */
-                pci_pm_set_unknown_state(pci_dev);
+                if (i)
+                        return i;
+
+                if (pci_dev->state_saved)
+                        goto Fixup;
+
+                if (WARN_ON_ONCE(pci_dev->current_state != PCI_D0))
+                        goto Fixup;
         }
 
+        pci_save_state(pci_dev);
+        /*
+         * This is for compatibility with existing code with legacy PM support.
+         */
+        pci_pm_set_unknown_state(pci_dev);
+
+ Fixup:
         pci_fixup_device(pci_fixup_suspend, pci_dev);
 
         return i;
@@ -386,81 +396,34 @@ static int pci_legacy_suspend_late(struct device *dev, pm_message_t state)
 
 static int pci_legacy_resume_early(struct device *dev)
 {
-        int error = 0;
         struct pci_dev * pci_dev = to_pci_dev(dev);
         struct pci_driver * drv = pci_dev->driver;
 
-        pci_fixup_device(pci_fixup_resume_early, pci_dev);
-
-        if (drv && drv->resume_early)
-                error = drv->resume_early(pci_dev);
-        return error;
+        return drv && drv->resume_early ?
+                        drv->resume_early(pci_dev) : 0;
 }
 
 static int pci_legacy_resume(struct device *dev)
 {
-        int error;
         struct pci_dev * pci_dev = to_pci_dev(dev);
         struct pci_driver * drv = pci_dev->driver;
 
         pci_fixup_device(pci_fixup_resume, pci_dev);
 
-        if (drv && drv->resume) {
-                error = drv->resume(pci_dev);
-        } else {
-                /* restore the PCI config space */
-                pci_restore_state(pci_dev);
-                error = pci_pm_reenable_device(pci_dev);
-        }
-        return error;
+        return drv && drv->resume ?
+                        drv->resume(pci_dev) : pci_pm_reenable_device(pci_dev);
 }
 
 /* Auxiliary functions used by the new power management framework */
 
-static int pci_restore_standard_config(struct pci_dev *pci_dev)
-{
-        struct pci_dev *parent = pci_dev->bus->self;
-        int error = 0;
-
-        /* Check if the device's bus is operational */
-        if (!parent || parent->current_state == PCI_D0) {
-                pci_restore_state(pci_dev);
-                pci_update_current_state(pci_dev, PCI_D0);
-        } else {
-                dev_warn(&pci_dev->dev, "unable to restore config, "
-                        "bridge %s in low power state D%d\n", pci_name(parent),
-                        parent->current_state);
-                pci_dev->current_state = PCI_UNKNOWN;
-                error = -EAGAIN;
-        }
-
-        return error;
-}
-
-static bool pci_is_bridge(struct pci_dev *pci_dev)
-{
-        return !!(pci_dev->subordinate);
-}
-
 static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev)
 {
-        if (pci_restore_standard_config(pci_dev))
-                pci_fixup_device(pci_fixup_resume_early, pci_dev);
+        pci_restore_standard_config(pci_dev);
+        pci_fixup_device(pci_fixup_resume_early, pci_dev);
 }
 
 static int pci_pm_default_resume(struct pci_dev *pci_dev)
 {
-        /*
-         * pci_restore_standard_config() should have been called once already,
-         * but it would have failed if the device's parent bridge had not been
-         * in power state D0 at that time.  Check it and try again if necessary.
-         */
-        if (pci_dev->current_state == PCI_UNKNOWN) {
-                int error = pci_restore_standard_config(pci_dev);
-                if (error)
-                        return error;
-        }
-
         pci_fixup_device(pci_fixup_resume, pci_dev);
 
         if (!pci_is_bridge(pci_dev))
@@ -575,11 +538,11 @@ static int pci_pm_resume_noirq(struct device *dev)
         struct device_driver *drv = dev->driver;
         int error = 0;
 
+        pci_pm_default_resume_noirq(pci_dev);
+
         if (pci_has_legacy_pm_support(pci_dev))
                 return pci_legacy_resume_early(dev);
 
-        pci_pm_default_resume_noirq(pci_dev);
-
         if (drv && drv->pm && drv->pm->resume_noirq)
                 error = drv->pm->resume_noirq(dev);
 
@@ -730,11 +693,11 @@ static int pci_pm_restore_noirq(struct device *dev)
         struct device_driver *drv = dev->driver;
         int error = 0;
 
+        pci_pm_default_resume_noirq(pci_dev);
+
         if (pci_has_legacy_pm_support(pci_dev))
                 return pci_legacy_resume_early(dev);
 
-        pci_pm_default_resume_noirq(pci_dev);
-
         if (drv && drv->pm && drv->pm->restore_noirq)
                 error = drv->pm->restore_noirq(dev);
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e491fdedf705..17bd9325a245 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -22,7 +22,7 @@
 #include <asm/dma.h>    /* isa_dma_bridge_buggy */
 #include "pci.h"
 
-unsigned int pci_pm_d3_delay = 10;
+unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT;
 
 #ifdef CONFIG_PCI_DOMAINS
 int pci_domains_supported = 1;
@@ -426,6 +426,7 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
  *                           given PCI device
  * @dev: PCI device to handle.
  * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
+ * @wait: If 'true', wait for the device to change its power state
  *
  * RETURN VALUE:
  * -EINVAL if the requested state is invalid.
@@ -435,7 +436,7 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
  * 0 if device's power state has been successfully changed.
  */
 static int
-pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
+pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
 {
         u16 pmcsr;
         bool need_restore = false;
@@ -480,8 +481,10 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
                 break;
         case PCI_UNKNOWN: /* Boot-up */
                 if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
-                 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
+                 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) {
                         need_restore = true;
+                        wait = true;
+                }
                 /* Fall-through: force to D0 */
         default:
                 pmcsr = 0;
@@ -491,12 +494,15 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
         /* enter specified state */
         pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
 
+        if (!wait)
+                return 0;
+
         /* Mandatory power management transition delays */
         /* see PCI PM 1.1 5.6.1 table 18 */
         if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
                 msleep(pci_pm_d3_delay);
         else if (state == PCI_D2 || dev->current_state == PCI_D2)
-                udelay(200);
+                udelay(PCI_PM_D2_DELAY);
 
         dev->current_state = state;
 
@@ -515,7 +521,7 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
         if (need_restore)
                 pci_restore_bars(dev);
 
-        if (dev->bus->self)
+        if (wait && dev->bus->self)
                 pcie_aspm_pm_state_change(dev->bus->self);
 
         return 0;
@@ -585,7 +591,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
         if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
                 return 0;
 
-        error = pci_raw_set_power_state(dev, state);
+        error = pci_raw_set_power_state(dev, state, true);
 
         if (state > PCI_D0 && platform_pci_power_manageable(dev)) {
                 /* Allow the platform to finalize the transition */
@@ -730,6 +736,7 @@ pci_save_state(struct pci_dev *dev)
         /* XXX: 100% dword access ok here? */
         for (i = 0; i < 16; i++)
                 pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]);
+        dev->state_saved = true;
         if ((i = pci_save_pcie_state(dev)) != 0)
                 return i;
         if ((i = pci_save_pcix_state(dev)) != 0)
@@ -1374,6 +1381,50 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev)
 }
 
 /**
+ * pci_restore_standard_config - restore standard config registers of PCI device
+ * @dev: PCI device to handle
+ *
+ * This function assumes that the device's configuration space is accessible.
+ * If the device needs to be powered up, the function will wait for it to
+ * change the state.
+ */
+int pci_restore_standard_config(struct pci_dev *dev)
+{
+        pci_power_t prev_state;
+        int error;
+
+        pci_restore_state(dev);
+        pci_update_current_state(dev, PCI_D0);
+
+        prev_state = dev->current_state;
+        if (prev_state == PCI_D0)
+                return 0;
+
+        error = pci_raw_set_power_state(dev, PCI_D0, false);
+        if (error)
+                return error;
+
+        if (pci_is_bridge(dev)) {
+                if (prev_state > PCI_D1)
+                        mdelay(PCI_PM_BUS_WAIT);
+        } else {
+                switch(prev_state) {
+                case PCI_D3cold:
+                case PCI_D3hot:
+                        mdelay(pci_pm_d3_delay);
+                        break;
+                case PCI_D2:
+                        udelay(PCI_PM_D2_DELAY);
+                        break;
+                }
+        }
+
+        dev->current_state = PCI_D0;
+
+        return 0;
+}
+
+/**
  * pci_enable_ari - enable ARI forwarding if hardware support it
  * @dev: the PCI device
  */
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 1351bb4addde..26ddf78ac300 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -49,6 +49,12 @@ extern void pci_disable_enabled_device(struct pci_dev *dev);
 extern void pci_pm_init(struct pci_dev *dev);
 extern void platform_pci_wakeup_init(struct pci_dev *dev);
 extern void pci_allocate_cap_save_buffers(struct pci_dev *dev);
+extern int pci_restore_standard_config(struct pci_dev *dev);
+
+static inline bool pci_is_bridge(struct pci_dev *pci_dev)
+{
+        return !!(pci_dev->subordinate);
+}
 
 extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
 extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val);
diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
index d30bb766fcef..b56a704409d2 100644
--- a/drivers/power/pda_power.c
+++ b/drivers/power/pda_power.c
@@ -20,7 +20,7 @@
 
 static inline unsigned int get_irq_flags(struct resource *res)
 {
-        unsigned int flags = IRQF_DISABLED | IRQF_SHARED;
+        unsigned int flags = IRQF_SAMPLE_RANDOM | IRQF_SHARED;
 
         flags |= res->flags & IRQF_TRIGGER_MASK;
 
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index bca08eff4a77..083f787d260d 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -70,7 +70,9 @@ static char debug_buffer[255];
 static void lcs_tasklet(unsigned long);
 static void lcs_start_kernel_thread(struct work_struct *);
 static void lcs_get_frames_cb(struct lcs_channel *, struct lcs_buffer *);
+#ifdef CONFIG_IP_MULTICAST
 static int lcs_send_delipm(struct lcs_card *, struct lcs_ipm_list *);
+#endif /* CONFIG_IP_MULTICAST */
 static int lcs_recovery(void *ptr);
 
 /**
@@ -1285,6 +1287,8 @@ out:
         lcs_clear_thread_running_bit(card, LCS_SET_MC_THREAD);
         return 0;
 }
+#endif /* CONFIG_IP_MULTICAST */
+
 /**
  * function called by net device to
  * handle multicast address relevant things
@@ -1292,6 +1296,7 @@ out:
 static void
 lcs_set_multicast_list(struct net_device *dev)
 {
+#ifdef CONFIG_IP_MULTICAST
         struct lcs_card *card;
 
         LCS_DBF_TEXT(4, trace, "setmulti");
@@ -1299,9 +1304,8 @@ lcs_set_multicast_list(struct net_device *dev)
 
         if (!lcs_set_thread_start_bit(card, LCS_SET_MC_THREAD))
                 schedule_work(&card->kernel_thread_starter);
-}
-
 #endif /* CONFIG_IP_MULTICAST */
+}
 
 static long
 lcs_check_irb_error(struct ccw_device *cdev, struct irb *irb)
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 38c600c0dbbf..3599828b9766 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -32,7 +32,9 @@
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721)
 # define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
-#define SCIF_ORER    0x0200   /* overrun error bit */
+# define PORT_PTCR         0xA405011EUL
+# define PORT_PVCR         0xA4050122UL
+# define SCIF_ORER         0x0200   /* overrun error bit */
 #elif defined(CONFIG_SH_RTS7751R2D)
 # define SCSPTR1 0xFFE0001C /* 8 bit SCIF */
 # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
@@ -393,6 +395,7 @@ SCIx_FNS(SCSCR,  0x08, 16, 0x08, 16)
 SCIx_FNS(SCxTDR, 0x20,  8, 0x0c,  8)
 SCIx_FNS(SCxSR,  0x14, 16, 0x10, 16)
 SCIx_FNS(SCxRDR, 0x24,  8, 0x14,  8)
+SCIx_FNS(SCSPTR, 0,     0,    0,  0)
 SCIF_FNS(SCTDSR, 0x0c,  8)
 SCIF_FNS(SCFER,  0x10, 16)
 SCIF_FNS(SCFCR,  0x18, 16)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 4a6fe01831a8..83a185d52961 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -230,17 +230,6 @@ config SPI_XILINX
 #
 comment "SPI Protocol Masters"
 
-config SPI_AT25
-        tristate "SPI EEPROMs from most vendors"
-        depends on SYSFS
-        help
-          Enable this driver to get read/write support to most SPI EEPROMs,
-          after you configure the board init code to know about each eeprom
-          on your target board.
-
-          This driver can also be built as a module.  If so, the module
-          will be called at25.
-
 config SPI_SPIDEV
         tristate "User mode SPI device driver support"
         depends on EXPERIMENTAL
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 5e9f521b8844..5d0451936d86 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -33,7 +33,6 @@ obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.o
 #       ... add above this line ...
 
 # SPI protocol drivers (device/link on bus)
-obj-$(CONFIG_SPI_AT25)          += at25.o
 obj-$(CONFIG_SPI_SPIDEV)        += spidev.o
 obj-$(CONFIG_SPI_TLE62X0)       += tle62x0.o
 #       ... add above this line ...
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 4bbddb73abd9..f3aaba35e912 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -315,14 +315,14 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver,
                 return -ENODEV;
         }
 
-        usb_host_ck = clk_get(0, "usb_hhc_ck");
+        usb_host_ck = clk_get(&pdev->dev, "usb_hhc_ck");
         if (IS_ERR(usb_host_ck))
                 return PTR_ERR(usb_host_ck);
 
         if (!cpu_is_omap15xx())
-                usb_dc_ck = clk_get(0, "usb_dc_ck");
+                usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck");
         else
-                usb_dc_ck = clk_get(0, "lb_ck");
+                usb_dc_ck = clk_get(&pdev->dev, "lb_ck");
 
         if (IS_ERR(usb_dc_ck)) {
                 clk_put(usb_host_ck);
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6372f8b17b45..c94f71980c1b 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2123,6 +2123,18 @@ config FB_PRE_INIT_FB
           Select this option if display contents should be inherited as set by
           the bootloader.
 
+config FB_MX3
+       tristate "MX3 Framebuffer support"
+       depends on FB && MX3_IPU
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       default y
+       help
+         This is a framebuffer device for the i.MX31 LCD Controller. So
+         far only synchronous displays are supported. If you plan to use
+         an LCD display with your i.MX31 system, say Y here.
+
 source "drivers/video/omap/Kconfig"
 
 source "drivers/video/backlight/Kconfig"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index be2b657546ef..2a998ca6181d 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -132,6 +132,7 @@ obj-$(CONFIG_FB_VGA16)            += vga16fb.o
 obj-$(CONFIG_FB_OF)               += offb.o
 obj-$(CONFIG_FB_BF54X_LQ043)      += bf54x-lq043fb.o
 obj-$(CONFIG_FB_BFIN_T350MCQB)    += bfin-t350mcqb-fb.o
+obj-$(CONFIG_FB_MX3)              += mx3fb.o
 
 # the test framebuffer is last
 obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c
index 2c5567175dca..359fc64e761a 100644
--- a/drivers/video/aty/radeon_i2c.c
+++ b/drivers/video/aty/radeon_i2c.c
@@ -72,7 +72,6 @@ static int radeon_setup_i2c_bus(struct radeon_i2c_chan *chan, const char *name)
         snprintf(chan->adapter.name, sizeof(chan->adapter.name),
                  "radeonfb %s", name);
         chan->adapter.owner             = THIS_MODULE;
-        chan->adapter.id                = I2C_HW_B_RADEON;
         chan->adapter.algo_data         = &chan->algo;
         chan->adapter.dev.parent        = &chan->rinfo->pdev->dev;
         chan->algo.setsda               = radeon_gpio_setsda;
diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c
index 7787c3322ffb..9dd55e5324a1 100644
--- a/drivers/video/i810/i810-i2c.c
+++ b/drivers/video/i810/i810-i2c.c
@@ -90,7 +90,6 @@ static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name)
         chan->adapter.owner             = THIS_MODULE;
         chan->adapter.algo_data         = &chan->algo;
         chan->adapter.dev.parent        = &chan->par->dev->dev;
-        chan->adapter.id                = I2C_HW_B_I810;
         chan->algo.setsda               = i810i2c_setsda;
         chan->algo.setscl               = i810i2c_setscl;
         chan->algo.getsda               = i810i2c_getsda;
diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c
index 5d896b81f4e0..b3065492bb20 100644
--- a/drivers/video/intelfb/intelfb_i2c.c
+++ b/drivers/video/intelfb/intelfb_i2c.c
@@ -111,7 +111,6 @@ static int intelfb_setup_i2c_bus(struct intelfb_info *dinfo,
                  "intelfb %s", name);
         chan->adapter.class             = class;
         chan->adapter.owner             = THIS_MODULE;
-        chan->adapter.id                = I2C_HW_B_INTELFB;
         chan->adapter.algo_data         = &chan->algo;
         chan->adapter.dev.parent        = &chan->dinfo->pdev->dev;
         chan->algo.setsda               = intelfb_gpio_setsda;
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
new file mode 100644
index 000000000000..8a75d05f4334
--- /dev/null
+++ b/drivers/video/mx3fb.c
@@ -0,0 +1,1555 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/console.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+
+#include <mach/hardware.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#define MX3FB_NAME             "mx3_sdc_fb"
+
+#define MX3FB_REG_OFFSET       0xB4
+
+/* SDC Registers */
+#define SDC_COM_CONF           (0xB4 - MX3FB_REG_OFFSET)
+#define SDC_GW_CTRL            (0xB8 - MX3FB_REG_OFFSET)
+#define SDC_FG_POS             (0xBC - MX3FB_REG_OFFSET)
+#define SDC_BG_POS             (0xC0 - MX3FB_REG_OFFSET)
+#define SDC_CUR_POS            (0xC4 - MX3FB_REG_OFFSET)
+#define SDC_PWM_CTRL           (0xC8 - MX3FB_REG_OFFSET)
+#define SDC_CUR_MAP            (0xCC - MX3FB_REG_OFFSET)
+#define SDC_HOR_CONF           (0xD0 - MX3FB_REG_OFFSET)
+#define SDC_VER_CONF           (0xD4 - MX3FB_REG_OFFSET)
+#define SDC_SHARP_CONF_1       (0xD8 - MX3FB_REG_OFFSET)
+#define SDC_SHARP_CONF_2       (0xDC - MX3FB_REG_OFFSET)
+
+/* Register bits */
+#define SDC_COM_TFT_COLOR      0x00000001UL
+#define SDC_COM_FG_EN          0x00000010UL
+#define SDC_COM_GWSEL          0x00000020UL
+#define SDC_COM_GLB_A          0x00000040UL
+#define SDC_COM_KEY_COLOR_G    0x00000080UL
+#define SDC_COM_BG_EN          0x00000200UL
+#define SDC_COM_SHARP          0x00001000UL
+
+#define SDC_V_SYNC_WIDTH_L     0x00000001UL
+
+/* Display Interface registers */
+#define DI_DISP_IF_CONF                (0x0124 - MX3FB_REG_OFFSET)
+#define DI_DISP_SIG_POL                (0x0128 - MX3FB_REG_OFFSET)
+#define DI_SER_DISP1_CONF      (0x012C - MX3FB_REG_OFFSET)
+#define DI_SER_DISP2_CONF      (0x0130 - MX3FB_REG_OFFSET)
+#define DI_HSP_CLK_PER         (0x0134 - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_1   (0x0138 - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_2   (0x013C - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_3   (0x0140 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_1   (0x0144 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_2   (0x0148 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_3   (0x014C - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_1   (0x0150 - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_2   (0x0154 - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_3   (0x0158 - MX3FB_REG_OFFSET)
+#define DI_DISP3_TIME_CONF     (0x015C - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB0_MAP       (0x0160 - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB1_MAP       (0x0164 - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB2_MAP       (0x0168 - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB0_MAP       (0x016C - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB1_MAP       (0x0170 - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB2_MAP       (0x0174 - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB0_MAP       (0x0178 - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB1_MAP       (0x017C - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB2_MAP       (0x0180 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB0_MAP       (0x0184 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB1_MAP       (0x0188 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB2_MAP       (0x018C - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB0_MAP       (0x0190 - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB1_MAP       (0x0194 - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB2_MAP       (0x0198 - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB0_MAP       (0x019C - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB1_MAP       (0x01A0 - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB2_MAP       (0x01A4 - MX3FB_REG_OFFSET)
+#define DI_DISP3_B0_MAP                (0x01A8 - MX3FB_REG_OFFSET)
+#define DI_DISP3_B1_MAP                (0x01AC - MX3FB_REG_OFFSET)
+#define DI_DISP3_B2_MAP                (0x01B0 - MX3FB_REG_OFFSET)
+#define DI_DISP_ACC_CC         (0x01B4 - MX3FB_REG_OFFSET)
+#define DI_DISP_LLA_CONF       (0x01B8 - MX3FB_REG_OFFSET)
+#define DI_DISP_LLA_DATA       (0x01BC - MX3FB_REG_OFFSET)
+
+/* DI_DISP_SIG_POL bits */
+#define DI_D3_VSYNC_POL_SHIFT          28
+#define DI_D3_HSYNC_POL_SHIFT          27
+#define DI_D3_DRDY_SHARP_POL_SHIFT     26
+#define DI_D3_CLK_POL_SHIFT            25
+#define DI_D3_DATA_POL_SHIFT           24
+
+/* DI_DISP_IF_CONF bits */
+#define DI_D3_CLK_IDLE_SHIFT           26
+#define DI_D3_CLK_SEL_SHIFT            25
+#define DI_D3_DATAMSK_SHIFT            24
+
+enum ipu_panel {
+       IPU_PANEL_SHARP_TFT,
+       IPU_PANEL_TFT,
+};
+
+struct ipu_di_signal_cfg {
+       unsigned datamask_en:1;
+       unsigned clksel_en:1;
+       unsigned clkidle_en:1;
+       unsigned data_pol:1;    /* true = inverted */
+       unsigned clk_pol:1;     /* true = rising edge */
+       unsigned enable_pol:1;
+       unsigned Hsync_pol:1;   /* true = active high */
+       unsigned Vsync_pol:1;
+};
+
+static const struct fb_videomode mx3fb_modedb[] = {
+       {
+               /* 240x320 @ 60 Hz */
+               .name           = "Sharp-QVGA",
+               .refresh        = 60,
+               .xres           = 240,
+               .yres           = 320,
+               .pixclock       = 185925,
+               .left_margin    = 9,
+               .right_margin   = 16,
+               .upper_margin   = 7,
+               .lower_margin   = 9,
+               .hsync_len      = 1,
+               .vsync_len      = 1,
+               .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+                                 FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
+                                 FB_SYNC_CLK_IDLE_EN,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* 240x33 @ 60 Hz */
+               .name           = "Sharp-CLI",
+               .refresh        = 60,
+               .xres           = 240,
+               .yres           = 33,
+               .pixclock       = 185925,
+               .left_margin    = 9,
+               .right_margin   = 16,
+               .upper_margin   = 7,
+               .lower_margin   = 9 + 287,
+               .hsync_len      = 1,
+               .vsync_len      = 1,
+               .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+                                 FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
+                                 FB_SYNC_CLK_IDLE_EN,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* 640x480 @ 60 Hz */
+               .name           = "NEC-VGA",
+               .refresh        = 60,
+               .xres           = 640,
+               .yres           = 480,
+               .pixclock       = 38255,
+               .left_margin    = 144,
+               .right_margin   = 0,
+               .upper_margin   = 34,
+               .lower_margin   = 40,
+               .hsync_len      = 1,
+               .vsync_len      = 1,
+               .sync           = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* NTSC TV output */
+               .name           = "TV-NTSC",
+               .refresh        = 60,
+               .xres           = 640,
+               .yres           = 480,
+               .pixclock       = 37538,
+               .left_margin    = 38,
+               .right_margin   = 858 - 640 - 38 - 3,
+               .upper_margin   = 36,
+               .lower_margin   = 518 - 480 - 36 - 1,
+               .hsync_len      = 3,
+               .vsync_len      = 1,
+               .sync           = 0,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* PAL TV output */
+               .name           = "TV-PAL",
+               .refresh        = 50,
+               .xres           = 640,
+               .yres           = 480,
+               .pixclock       = 37538,
+               .left_margin    = 38,
+               .right_margin   = 960 - 640 - 38 - 32,
+               .upper_margin   = 32,
+               .lower_margin   = 555 - 480 - 32 - 3,
+               .hsync_len      = 32,
+               .vsync_len      = 3,
+               .sync           = 0,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* TV output VGA mode, 640x480 @ 65 Hz */
+               .name           = "TV-VGA",
+               .refresh        = 60,
+               .xres           = 640,
+               .yres           = 480,
+               .pixclock       = 40574,
+               .left_margin    = 35,
+               .right_margin   = 45,
+               .upper_margin   = 9,
+               .lower_margin   = 1,
+               .hsync_len      = 46,
+               .vsync_len      = 5,
+               .sync           = 0,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       },
+};
+
+struct mx3fb_data {
+       struct fb_info          *fbi;
+       int                     backlight_level;
+       void __iomem            *reg_base;
+       spinlock_t              lock;
+       struct device           *dev;
+
+       uint32_t                h_start_width;
+       uint32_t                v_start_width;
+};
+
+struct dma_chan_request {
+       struct mx3fb_data       *mx3fb;
+       enum ipu_channel        id;
+};
+
+/* MX3 specific framebuffer information. */
+struct mx3fb_info {
+       int                             blank;
+       enum ipu_channel                ipu_ch;
+       uint32_t                        cur_ipu_buf;
+
+       u32                             pseudo_palette[16];
+
+       struct completion               flip_cmpl;
+       struct mutex                    mutex;  /* Protects fb-ops */
+       struct mx3fb_data               *mx3fb;
+       struct idmac_channel            *idmac_channel;
+       struct dma_async_tx_descriptor  *txd;
+       dma_cookie_t                    cookie;
+       struct scatterlist              sg[2];
+
+       u32                             sync;   /* preserve var->sync flags */
+};
+
+static void mx3fb_dma_done(void *);
+
+/* Used fb-mode and bpp. Can be set on kernel command line, therefore file-static. */
+static const char *fb_mode;
+static unsigned long default_bpp = 16;
+
+static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg)
+{
+       return __raw_readl(mx3fb->reg_base + reg);
+}
+
+static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg)
+{
+       __raw_writel(value, mx3fb->reg_base + reg);
+}
+
+static const uint32_t di_mappings[] = {
+       0x1600AAAA, 0x00E05555, 0x00070000, 3,  /* RGB888 */
+       0x0005000F, 0x000B000F, 0x0011000F, 1,  /* RGB666 */
+       0x0011000F, 0x000B000F, 0x0005000F, 1,  /* BGR666 */
+       0x0004003F, 0x000A000F, 0x000F003F, 1   /* RGB565 */
+};
+
+static void sdc_fb_init(struct mx3fb_info *fbi)
+{
+       struct mx3fb_data *mx3fb = fbi->mx3fb;
+       uint32_t reg;
+
+       reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+
+       mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF);
+}
+
+/* Returns enabled flag before uninit */
+static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi)
+{
+       struct mx3fb_data *mx3fb = fbi->mx3fb;
+       uint32_t reg;
+
+       reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+
+       mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF);
+
+       return reg & SDC_COM_BG_EN;
+}
+
+static void sdc_enable_channel(struct mx3fb_info *mx3_fbi)
+{
+       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+       struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+       struct dma_chan *dma_chan = &ichan->dma_chan;
+       unsigned long flags;
+       dma_cookie_t cookie;
+
+       dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
+               to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
+
+       /* This enables the channel */
+       if (mx3_fbi->cookie < 0) {
+               mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan,
+                     &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
+               if (!mx3_fbi->txd) {
+                       dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n",
+                               dma_chan->chan_id);
+                       return;
+               }
+
+               mx3_fbi->txd->callback_param    = mx3_fbi->txd;
+               mx3_fbi->txd->callback          = mx3fb_dma_done;
+
+               cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd);
+               dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__,
+                      mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
+       } else {
+               if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) {
+                       dev_err(mx3fb->dev, "Cannot enable channel %d\n",
+                               dma_chan->chan_id);
+                       return;
+               }
+
+               /* Just re-activate the same buffer */
+               dma_async_issue_pending(dma_chan);
+               cookie = mx3_fbi->cookie;
+               dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__,
+                      mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
+       }
+
+       if (cookie >= 0) {
+               spin_lock_irqsave(&mx3fb->lock, flags);
+               sdc_fb_init(mx3_fbi);
+               mx3_fbi->cookie = cookie;
+               spin_unlock_irqrestore(&mx3fb->lock, flags);
+       }
+
+       /*
+        * Attention! Without this msleep the channel keeps generating
+        * interrupts. Next sdc_set_brightness() is going to be called
+        * from mx3fb_blank().
+        */
+       msleep(2);
+}
+
+static void sdc_disable_channel(struct mx3fb_info *mx3_fbi)
+{
+       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+       uint32_t enabled;
+       unsigned long flags;
+
+       spin_lock_irqsave(&mx3fb->lock, flags);
+
+       enabled = sdc_fb_uninit(mx3_fbi);
+
+       spin_unlock_irqrestore(&mx3fb->lock, flags);
+
+       mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan);
+       mx3_fbi->txd = NULL;
+       mx3_fbi->cookie = -EINVAL;
+}
+
+/**
+ * sdc_set_window_pos() - set window position of the respective plane.
+ * @mx3fb:     mx3fb context.
+ * @channel:   IPU DMAC channel ID.
+ * @x_pos:     X coordinate relative to the top left corner to place window at.
+ * @y_pos:     Y coordinate relative to the top left corner to place window at.
+ * @return:    0 on success or negative error code on failure.
+ */
+static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel,
+                             int16_t x_pos, int16_t y_pos)
+{
+       x_pos += mx3fb->h_start_width;
+       y_pos += mx3fb->v_start_width;
+
+       if (channel != IDMAC_SDC_0)
+               return -EINVAL;
+
+       mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS);
+       return 0;
+}
+
+/**
+ * sdc_init_panel() - initialize a synchronous LCD panel.
+ * @mx3fb:             mx3fb context.
+ * @panel:             panel type.
+ * @pixel_clk:         desired pixel clock frequency in Hz.
+ * @width:             width of panel in pixels.
+ * @height:            height of panel in pixels.
+ * @pixel_fmt:         pixel format of buffer as FOURCC ASCII code.
+ * @h_start_width:     number of pixel clocks between the HSYNC signal pulse
+ *                     and the start of valid data.
+ * @h_sync_width:      width of the HSYNC signal in units of pixel clocks.
+ * @h_end_width:       number of pixel clocks between the end of valid data
+ *                     and the HSYNC signal for next line.
+ * @v_start_width:     number of lines between the VSYNC signal pulse and the
+ *                     start of valid data.
+ * @v_sync_width:      width of the VSYNC signal in units of lines
+ * @v_end_width:       number of lines between the end of valid data and the
+ *                     VSYNC signal for next frame.
+ * @sig:               bitfield of signal polarities for LCD interface.
+ * @return:            0 on success or negative error code on failure.
+ */
+static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel,
+                         uint32_t pixel_clk,
+                         uint16_t width, uint16_t height,
+                         enum pixel_fmt pixel_fmt,
+                         uint16_t h_start_width, uint16_t h_sync_width,
+                         uint16_t h_end_width, uint16_t v_start_width,
+                         uint16_t v_sync_width, uint16_t v_end_width,
+                         struct ipu_di_signal_cfg sig)
+{
+       unsigned long lock_flags;
+       uint32_t reg;
+       uint32_t old_conf;
+       uint32_t div;
+       struct clk *ipu_clk;
+
+       dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height);
+
+       if (v_sync_width == 0 || h_sync_width == 0)
+               return -EINVAL;
+
+       /* Init panel size and blanking periods */
+       reg = ((uint32_t) (h_sync_width - 1) << 26) |
+               ((uint32_t) (width + h_start_width + h_end_width - 1) << 16);
+       mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF);
+
+#ifdef DEBUG
+       printk(KERN_CONT " hor_conf %x,", reg);
+#endif
+
+       reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L |
+           ((uint32_t) (height + v_start_width + v_end_width - 1) << 16);
+       mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF);
+
+#ifdef DEBUG
+       printk(KERN_CONT " ver_conf %x\n", reg);
+#endif
+
+       mx3fb->h_start_width = h_start_width;
+       mx3fb->v_start_width = v_start_width;
+
+       switch (panel) {
+       case IPU_PANEL_SHARP_TFT:
+               mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1);
+               mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2);
+               mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
+               break;
+       case IPU_PANEL_TFT:
+               mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF);
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       /* Init clocking */
+
+       /*
+        * Calculate divider: fractional part is 4 bits so simply multiple by
+        * 24 to get fractional part, as long as we stay under ~250MHz and on
+        * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz
+        */
+       dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk);
+
+       ipu_clk = clk_get(mx3fb->dev, "ipu_clk");
+       div = clk_get_rate(ipu_clk) * 16 / pixel_clk;
+       clk_put(ipu_clk);
+
+       if (div < 0x40) {       /* Divider less than 4 */
+               dev_dbg(mx3fb->dev,
+                       "InitPanel() - Pixel clock divider less than 4\n");
+               div = 0x40;
+       }
+
+       spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+       /*
+        * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits
+        * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing
+        * debug. DISP3_IF_CLK_UP_WR is 0
+        */
+       mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF);
+
+       /* DI settings */
+       old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF;
+       old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT |
+           sig.clksel_en << DI_D3_CLK_SEL_SHIFT |
+           sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT;
+       mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF);
+
+       old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF;
+       old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT |
+           sig.clk_pol << DI_D3_CLK_POL_SHIFT |
+           sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT |
+           sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT |
+           sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT;
+       mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL);
+
+       switch (pixel_fmt) {
+       case IPU_PIX_FMT_RGB24:
+               mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP);
+               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+                            ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC);
+               break;
+       case IPU_PIX_FMT_RGB666:
+               mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP);
+               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+                            ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC);
+               break;
+       case IPU_PIX_FMT_BGR666:
+               mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP);
+               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+                            ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC);
+               break;
+       default:
+               mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP);
+               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+                            ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC);
+               break;
+       }
+
+       spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+       dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n",
+               mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF));
+       dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n",
+               mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL));
+       dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n",
+               mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF));
+
+       return 0;
+}
+
+/**
+ * sdc_set_color_key() - set the transparent color key for SDC graphic plane.
+ * @mx3fb:     mx3fb context.
+ * @channel:   IPU DMAC channel ID.
+ * @enable:    boolean to enable or disable color keyl.
+ * @color_key: 24-bit RGB color to use as transparent color key.
+ * @return:    0 on success or negative error code on failure.
+ */
+static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel,
+                            bool enable, uint32_t color_key)
+{
+       uint32_t reg, sdc_conf;
+       unsigned long lock_flags;
+
+       spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+       sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+       if (channel == IDMAC_SDC_0)
+               sdc_conf &= ~SDC_COM_GWSEL;
+       else
+               sdc_conf |= SDC_COM_GWSEL;
+
+       if (enable) {
+               reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L;
+               mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL),
+                            SDC_GW_CTRL);
+
+               sdc_conf |= SDC_COM_KEY_COLOR_G;
+       } else {
+               sdc_conf &= ~SDC_COM_KEY_COLOR_G;
+       }
+       mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF);
+
+       spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+       return 0;
+}
+
+/**
+ * sdc_set_global_alpha() - set global alpha blending modes.
+ * @mx3fb:     mx3fb context.
+ * @enable:    boolean to enable or disable global alpha blending. If disabled,
+ *             per pixel blending is used.
+ * @alpha:     global alpha value.
+ * @return:    0 on success or negative error code on failure.
+ */
+static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha)
+{
+       uint32_t reg;
+       unsigned long lock_flags;
+
+       spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+       if (enable) {
+               reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL;
+               mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL);
+
+               reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+               mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF);
+       } else {
+               reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+               mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF);
+       }
+
+       spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+       return 0;
+}
+
+static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value)
+{
+       /* This might be board-specific */
+       mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL);
+       return;
+}
+
+static uint32_t bpp_to_pixfmt(int bpp)
+{
+       uint32_t pixfmt = 0;
+       switch (bpp) {
+       case 24:
+               pixfmt = IPU_PIX_FMT_BGR24;
+               break;
+       case 32:
+               pixfmt = IPU_PIX_FMT_BGR32;
+               break;
+       case 16:
+               pixfmt = IPU_PIX_FMT_RGB565;
+               break;
+       }
+       return pixfmt;
+}
+
+static int mx3fb_blank(int blank, struct fb_info *fbi);
+static int mx3fb_map_video_memory(struct fb_info *fbi);
+static int mx3fb_unmap_video_memory(struct fb_info *fbi);
+
+/**
+ * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings.
+ * @info:      framebuffer information pointer
+ * @return:    0 on success or negative error code on failure.
+ */
+static int mx3fb_set_fix(struct fb_info *fbi)
+{
+       struct fb_fix_screeninfo *fix = &fbi->fix;
+       struct fb_var_screeninfo *var = &fbi->var;
+
+       strncpy(fix->id, "DISP3 BG", 8);
+
+       fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
+
+       fix->type = FB_TYPE_PACKED_PIXELS;
+       fix->accel = FB_ACCEL_NONE;
+       fix->visual = FB_VISUAL_TRUECOLOR;
+       fix->xpanstep = 1;
+       fix->ypanstep = 1;
+
+       return 0;
+}
+
+static void mx3fb_dma_done(void *arg)
+{
+       struct idmac_tx_desc *tx_desc = to_tx_desc(arg);
+       struct dma_chan *chan = tx_desc->txd.chan;
+       struct idmac_channel *ichannel = to_idmac_chan(chan);
+       struct mx3fb_data *mx3fb = ichannel->client;
+       struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
+
+       dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
+
+       /* We only need one interrupt, it will be re-enabled as needed */
+       disable_irq(ichannel->eof_irq);
+
+       complete(&mx3_fbi->flip_cmpl);
+}
+
+/**
+ * mx3fb_set_par() - set framebuffer parameters and change the operating mode.
+ * @fbi:       framebuffer information pointer.
+ * @return:    0 on success or negative error code on failure.
+ */
+static int mx3fb_set_par(struct fb_info *fbi)
+{
+       u32 mem_len;
+       struct ipu_di_signal_cfg sig_cfg;
+       enum ipu_panel mode = IPU_PANEL_TFT;
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+       struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+       struct idmac_video_param *video = &ichan->params.video;
+       struct scatterlist *sg = mx3_fbi->sg;
+       size_t screen_size;
+
+       dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
+
+       mutex_lock(&mx3_fbi->mutex);
+
+       /* Total cleanup */
+       if (mx3_fbi->txd)
+               sdc_disable_channel(mx3_fbi);
+
+       mx3fb_set_fix(fbi);
+
+       mem_len = fbi->var.yres_virtual * fbi->fix.line_length;
+       if (mem_len > fbi->fix.smem_len) {
+               if (fbi->fix.smem_start)
+                       mx3fb_unmap_video_memory(fbi);
+
+               fbi->fix.smem_len = mem_len;
+               if (mx3fb_map_video_memory(fbi) < 0) {
+                       mutex_unlock(&mx3_fbi->mutex);
+                       return -ENOMEM;
+               }
+       }
+
+       screen_size = fbi->fix.line_length * fbi->var.yres;
+
+       sg_init_table(&sg[0], 1);
+       sg_init_table(&sg[1], 1);
+
+       sg_dma_address(&sg[0])  = fbi->fix.smem_start;
+       sg_set_page(&sg[0], virt_to_page(fbi->screen_base),
+                   fbi->fix.smem_len,
+                   offset_in_page(fbi->screen_base));
+
+       if (mx3_fbi->ipu_ch == IDMAC_SDC_0) {
+               memset(&sig_cfg, 0, sizeof(sig_cfg));
+               if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
+                       sig_cfg.Hsync_pol = true;
+               if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
+                       sig_cfg.Vsync_pol = true;
+               if (fbi->var.sync & FB_SYNC_CLK_INVERT)
+                       sig_cfg.clk_pol = true;
+               if (fbi->var.sync & FB_SYNC_DATA_INVERT)
+                       sig_cfg.data_pol = true;
+               if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
+                       sig_cfg.enable_pol = true;
+               if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
+                       sig_cfg.clkidle_en = true;
+               if (fbi->var.sync & FB_SYNC_CLK_SEL_EN)
+                       sig_cfg.clksel_en = true;
+               if (fbi->var.sync & FB_SYNC_SHARP_MODE)
+                       mode = IPU_PANEL_SHARP_TFT;
+
+               dev_dbg(fbi->device, "pixclock = %ul Hz\n",
+                       (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL));
+
+               if (sdc_init_panel(mx3fb, mode,
+                                  (PICOS2KHZ(fbi->var.pixclock)) * 1000UL,
+                                  fbi->var.xres, fbi->var.yres,
+                                  (fbi->var.sync & FB_SYNC_SWAP_RGB) ?
+                                  IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666,
+                                  fbi->var.left_margin,
+                                  fbi->var.hsync_len,
+                                  fbi->var.right_margin +
+                                  fbi->var.hsync_len,
+                                  fbi->var.upper_margin,
+                                  fbi->var.vsync_len,
+                                  fbi->var.lower_margin +
+                                  fbi->var.vsync_len, sig_cfg) != 0) {
+                       mutex_unlock(&mx3_fbi->mutex);
+                       dev_err(fbi->device,
+                               "mx3fb: Error initializing panel.\n");
+                       return -EINVAL;
+               }
+       }
+
+       sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0);
+
+       mx3_fbi->cur_ipu_buf    = 0;
+
+       video->out_pixel_fmt    = bpp_to_pixfmt(fbi->var.bits_per_pixel);
+       video->out_width        = fbi->var.xres;
+       video->out_height       = fbi->var.yres;
+       video->out_stride       = fbi->var.xres_virtual;
+
+       if (mx3_fbi->blank == FB_BLANK_UNBLANK)
+               sdc_enable_channel(mx3_fbi);
+
+       mutex_unlock(&mx3_fbi->mutex);
+
+       return 0;
+}
+
+/**
+ * mx3fb_check_var() - check and adjust framebuffer variable parameters.
+ * @var:       framebuffer variable parameters
+ * @fbi:       framebuffer information pointer
+ */
+static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
+{
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       u32 vtotal;
+       u32 htotal;
+
+       dev_dbg(fbi->device, "%s\n", __func__);
+
+       if (var->xres_virtual < var->xres)
+               var->xres_virtual = var->xres;
+       if (var->yres_virtual < var->yres)
+               var->yres_virtual = var->yres;
+
+       if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
+           (var->bits_per_pixel != 16))
+               var->bits_per_pixel = default_bpp;
+
+       switch (var->bits_per_pixel) {
+       case 16:
+               var->red.length = 5;
+               var->red.offset = 11;
+               var->red.msb_right = 0;
+
+               var->green.length = 6;
+               var->green.offset = 5;
+               var->green.msb_right = 0;
+
+               var->blue.length = 5;
+               var->blue.offset = 0;
+               var->blue.msb_right = 0;
+
+               var->transp.length = 0;
+               var->transp.offset = 0;
+               var->transp.msb_right = 0;
+               break;
+       case 24:
+               var->red.length = 8;
+               var->red.offset = 16;
+               var->red.msb_right = 0;
+
+               var->green.length = 8;
+               var->green.offset = 8;
+               var->green.msb_right = 0;
+
+               var->blue.length = 8;
+               var->blue.offset = 0;
+               var->blue.msb_right = 0;
+
+               var->transp.length = 0;
+               var->transp.offset = 0;
+               var->transp.msb_right = 0;
+               break;
+       case 32:
+               var->red.length = 8;
+               var->red.offset = 16;
+               var->red.msb_right = 0;
+
+               var->green.length = 8;
+               var->green.offset = 8;
+               var->green.msb_right = 0;
+
+               var->blue.length = 8;
+               var->blue.offset = 0;
+               var->blue.msb_right = 0;
+
+               var->transp.length = 8;
+               var->transp.offset = 24;
+               var->transp.msb_right = 0;
+               break;
+       }
+
+       if (var->pixclock < 1000) {
+               htotal = var->xres + var->right_margin + var->hsync_len +
+                   var->left_margin;
+               vtotal = var->yres + var->lower_margin + var->vsync_len +
+                   var->upper_margin;
+               var->pixclock = (vtotal * htotal * 6UL) / 100UL;
+               var->pixclock = KHZ2PICOS(var->pixclock);
+               dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n",
+                       var->pixclock);
+       }
+
+       var->height = -1;
+       var->width = -1;
+       var->grayscale = 0;
+
+       /* Preserve sync flags */
+       var->sync |= mx3_fbi->sync;
+       mx3_fbi->sync |= var->sync;
+
+       return 0;
+}
+
+static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf)
+{
+       chan &= 0xffff;
+       chan >>= 16 - bf->length;
+       return chan << bf->offset;
+}
+
+static int mx3fb_setcolreg(unsigned int regno, unsigned int red,
+                          unsigned int green, unsigned int blue,
+                          unsigned int trans, struct fb_info *fbi)
+{
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       u32 val;
+       int ret = 1;
+
+       dev_dbg(fbi->device, "%s\n", __func__);
+
+       mutex_lock(&mx3_fbi->mutex);
+       /*
+        * If greyscale is true, then we convert the RGB value
+        * to greyscale no matter what visual we are using.
+        */
+       if (fbi->var.grayscale)
+               red = green = blue = (19595 * red + 38470 * green +
+                                     7471 * blue) >> 16;
+       switch (fbi->fix.visual) {
+       case FB_VISUAL_TRUECOLOR:
+               /*
+                * 16-bit True Colour.  We encode the RGB value
+                * according to the RGB bitfield information.
+                */
+               if (regno < 16) {
+                       u32 *pal = fbi->pseudo_palette;
+
+                       val = chan_to_field(red, &fbi->var.red);
+                       val |= chan_to_field(green, &fbi->var.green);
+                       val |= chan_to_field(blue, &fbi->var.blue);
+
+                       pal[regno] = val;
+
+                       ret = 0;
+               }
+               break;
+
+       case FB_VISUAL_STATIC_PSEUDOCOLOR:
+       case FB_VISUAL_PSEUDOCOLOR:
+               break;
+       }
+       mutex_unlock(&mx3_fbi->mutex);
+
+       return ret;
+}
+
+/**
+ * mx3fb_blank() - blank the display.
+ */
+static int mx3fb_blank(int blank, struct fb_info *fbi)
+{
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+
+       dev_dbg(fbi->device, "%s\n", __func__);
+
+       dev_dbg(fbi->device, "blank = %d\n", blank);
+
+       if (mx3_fbi->blank == blank)
+               return 0;
+
+       mutex_lock(&mx3_fbi->mutex);
+       mx3_fbi->blank = blank;
+
+       switch (blank) {
+       case FB_BLANK_POWERDOWN:
+       case FB_BLANK_VSYNC_SUSPEND:
+       case FB_BLANK_HSYNC_SUSPEND:
+       case FB_BLANK_NORMAL:
+               sdc_disable_channel(mx3_fbi);
+               sdc_set_brightness(mx3fb, 0);
+               break;
+       case FB_BLANK_UNBLANK:
+               sdc_enable_channel(mx3_fbi);
+               sdc_set_brightness(mx3fb, mx3fb->backlight_level);
+               break;
+       }
+       mutex_unlock(&mx3_fbi->mutex);
+
+       return 0;
+}
+
+/**
+ * mx3fb_pan_display() - pan or wrap the display
+ * @var:       variable screen buffer information.
+ * @info:      framebuffer information pointer.
+ *
+ * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag
+ */
+static int mx3fb_pan_display(struct fb_var_screeninfo *var,
+                            struct fb_info *fbi)
+{
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       u32 y_bottom;
+       unsigned long base;
+       off_t offset;
+       dma_cookie_t cookie;
+       struct scatterlist *sg = mx3_fbi->sg;
+       struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan;
+       struct dma_async_tx_descriptor *txd;
+       int ret;
+
+       dev_dbg(fbi->device, "%s [%c]\n", __func__,
+               list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+');
+
+       if (var->xoffset > 0) {
+               dev_dbg(fbi->device, "x panning not supported\n");
+               return -EINVAL;
+       }
+
+       if (fbi->var.xoffset == var->xoffset &&
+           fbi->var.yoffset == var->yoffset)
+               return 0;       /* No change, do nothing */
+
+       y_bottom = var->yoffset;
+
+       if (!(var->vmode & FB_VMODE_YWRAP))
+               y_bottom += var->yres;
+
+       if (y_bottom > fbi->var.yres_virtual)
+               return -EINVAL;
+
+       mutex_lock(&mx3_fbi->mutex);
+
+       offset = (var->yoffset * var->xres_virtual + var->xoffset) *
+               (var->bits_per_pixel / 8);
+       base = fbi->fix.smem_start + offset;
+
+       dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n",
+               mx3_fbi->cur_ipu_buf, base);
+
+       /*
+        * We enable the End of Frame interrupt, which will free a tx-descriptor,
+        * which we will need for the next device_prep_slave_sg(). The
+        * IRQ-handler will disable the IRQ again.
+        */
+       init_completion(&mx3_fbi->flip_cmpl);
+       enable_irq(mx3_fbi->idmac_channel->eof_irq);
+
+       ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10);
+       if (ret <= 0) {
+               mutex_unlock(&mx3_fbi->mutex);
+               dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ?
+                        "user interrupt" : "timeout");
+               return ret ? : -ETIMEDOUT;
+       }
+
+       mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf;
+
+       sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base;
+       sg_set_page(&sg[mx3_fbi->cur_ipu_buf],
+                   virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len,
+                   offset_in_page(fbi->screen_base + offset));
+
+       txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg +
+               mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
+       if (!txd) {
+               dev_err(fbi->device,
+                       "Error preparing a DMA transaction descriptor.\n");
+               mutex_unlock(&mx3_fbi->mutex);
+               return -EIO;
+       }
+
+       txd->callback_param     = txd;
+       txd->callback           = mx3fb_dma_done;
+
+       /*
+        * Emulate original mx3fb behaviour: each new call to idmac_tx_submit()
+        * should switch to another buffer
+        */
+       cookie = txd->tx_submit(txd);
+       dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie);
+       if (cookie < 0) {
+               dev_err(fbi->device,
+                       "Error updating SDC buf %d to address=0x%08lX\n",
+                       mx3_fbi->cur_ipu_buf, base);
+               mutex_unlock(&mx3_fbi->mutex);
+               return -EIO;
+       }
+
+       if (mx3_fbi->txd)
+               async_tx_ack(mx3_fbi->txd);
+       mx3_fbi->txd = txd;
+
+       fbi->var.xoffset = var->xoffset;
+       fbi->var.yoffset = var->yoffset;
+
+       if (var->vmode & FB_VMODE_YWRAP)
+               fbi->var.vmode |= FB_VMODE_YWRAP;
+       else
+               fbi->var.vmode &= ~FB_VMODE_YWRAP;
+
+       mutex_unlock(&mx3_fbi->mutex);
+
+       dev_dbg(fbi->device, "Update complete\n");
+
+       return 0;
+}
+
+/*
+ * This structure contains the pointers to the control functions that are
+ * invoked by the core framebuffer driver to perform operations like
+ * blitting, rectangle filling, copy regions and cursor definition.
+ */
+static struct fb_ops mx3fb_ops = {
+       .owner = THIS_MODULE,
+       .fb_set_par = mx3fb_set_par,
+       .fb_check_var = mx3fb_check_var,
+       .fb_setcolreg = mx3fb_setcolreg,
+       .fb_pan_display = mx3fb_pan_display,
+       .fb_fillrect = cfb_fillrect,
+       .fb_copyarea = cfb_copyarea,
+       .fb_imageblit = cfb_imageblit,
+       .fb_blank = mx3fb_blank,
+};
+
+#ifdef CONFIG_PM
+/*
+ * Power management hooks.      Note that we won't be called from IRQ context,
+ * unlike the blank functions above, so we may sleep.
+ */
+
+/*
+ * Suspends the framebuffer and blanks the screen. Power management support
+ */
+static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
+{
+       struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
+       struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+
+       acquire_console_sem();
+       fb_set_suspend(drv_data->fbi, 1);
+       release_console_sem();
+
+       if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
+               sdc_disable_channel(mx3_fbi);
+               sdc_set_brightness(mx3fb, 0);
+
+       }
+       return 0;
+}
+
+/*
+ * Resumes the framebuffer and unblanks the screen. Power management support
+ */
+static int mx3fb_resume(struct platform_device *pdev)
+{
+       struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
+       struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+
+       if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
+               sdc_enable_channel(mx3_fbi);
+               sdc_set_brightness(mx3fb, drv_data->backlight_level);
+       }
+
+       acquire_console_sem();
+       fb_set_suspend(drv_data->fbi, 0);
+       release_console_sem();
+
+       return 0;
+}
+#else
+#define mx3fb_suspend   NULL
+#define mx3fb_resume    NULL
+#endif
+
+/*
+ * Main framebuffer functions
+ */
+
+/**
+ * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer.
+ * @fbi:       framebuffer information pointer
+ * @return:    Error code indicating success or failure
+ *
+ * This buffer is remapped into a non-cached, non-buffered, memory region to
+ * allow palette and pixel writes to occur without flushing the cache. Once this
+ * area is remapped, all virtual memory access to the video memory should occur
+ * at the new region.
+ */
+static int mx3fb_map_video_memory(struct fb_info *fbi)
+{
+       int retval = 0;
+       dma_addr_t addr;
+
+       fbi->screen_base = dma_alloc_writecombine(fbi->device,
+                                                 fbi->fix.smem_len,
+                                                 &addr, GFP_DMA);
+
+       if (!fbi->screen_base) {
+               dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
+                       fbi->fix.smem_len);
+               retval = -EBUSY;
+               goto err0;
+       }
+
+       fbi->fix.smem_start = addr;
+
+       dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
+               (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
+
+       fbi->screen_size = fbi->fix.smem_len;
+
+       /* Clear the screen */
+       memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
+
+       return 0;
+
+err0:
+       fbi->fix.smem_len = 0;
+       fbi->fix.smem_start = 0;
+       fbi->screen_base = NULL;
+       return retval;
+}
+
+/**
+ * mx3fb_unmap_video_memory() - de-allocate frame buffer memory.
+ * @fbi:       framebuffer information pointer
+ * @return:    error code indicating success or failure
+ */
+static int mx3fb_unmap_video_memory(struct fb_info *fbi)
+{
+       dma_free_writecombine(fbi->device, fbi->fix.smem_len,
+                             fbi->screen_base, fbi->fix.smem_start);
+
+       fbi->screen_base = 0;
+       fbi->fix.smem_start = 0;
+       fbi->fix.smem_len = 0;
+       return 0;
+}
+
+/**
+ * mx3fb_init_fbinfo() - initialize framebuffer information object.
+ * @return:    initialized framebuffer structure.
+ */
+static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
+{
+       struct fb_info *fbi;
+       struct mx3fb_info *mx3fbi;
+       int ret;
+
+       /* Allocate sufficient memory for the fb structure */
+       fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev);
+       if (!fbi)
+               return NULL;
+
+       mx3fbi                  = fbi->par;
+       mx3fbi->cookie          = -EINVAL;
+       mx3fbi->cur_ipu_buf     = 0;
+
+       fbi->var.activate       = FB_ACTIVATE_NOW;
+
+       fbi->fbops              = ops;
+       fbi->flags              = FBINFO_FLAG_DEFAULT;
+       fbi->pseudo_palette     = mx3fbi->pseudo_palette;
+
+       mutex_init(&mx3fbi->mutex);
+
+       /* Allocate colormap */
+       ret = fb_alloc_cmap(&fbi->cmap, 16, 0);
+       if (ret < 0) {
+               framebuffer_release(fbi);
+               return NULL;
+       }
+
+       return fbi;
+}
+
+static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
+{
+       struct device *dev = mx3fb->dev;
+       struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data;
+       const char *name = mx3fb_pdata->name;
+       unsigned int irq;
+       struct fb_info *fbi;
+       struct mx3fb_info *mx3fbi;
+       const struct fb_videomode *mode;
+       int ret, num_modes;
+
+       ichan->client = mx3fb;
+       irq = ichan->eof_irq;
+
+       if (ichan->dma_chan.chan_id != IDMAC_SDC_0)
+               return -EINVAL;
+
+       fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops);
+       if (!fbi)
+               return -ENOMEM;
+
+       if (!fb_mode)
+               fb_mode = name;
+
+       if (!fb_mode) {
+               ret = -EINVAL;
+               goto emode;
+       }
+
+       if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
+               mode = mx3fb_pdata->mode;
+               num_modes = mx3fb_pdata->num_modes;
+       } else {
+               mode = mx3fb_modedb;
+               num_modes = ARRAY_SIZE(mx3fb_modedb);
+       }
+
+       if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
+                         num_modes, NULL, default_bpp)) {
+               ret = -EBUSY;
+               goto emode;
+       }
+
+       fb_videomode_to_modelist(mode, num_modes, &fbi->modelist);
+
+       /* Default Y virtual size is 2x panel size */
+       fbi->var.yres_virtual = fbi->var.yres * 2;
+
+       mx3fb->fbi = fbi;
+
+       /* set Display Interface clock period */
+       mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER);
+       /* Might need to trigger HSP clock change - see 44.3.3.8.5 */
+
+       sdc_set_brightness(mx3fb, 255);
+       sdc_set_global_alpha(mx3fb, true, 0xFF);
+       sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0);
+
+       mx3fbi                  = fbi->par;
+       mx3fbi->idmac_channel   = ichan;
+       mx3fbi->ipu_ch          = ichan->dma_chan.chan_id;
+       mx3fbi->mx3fb           = mx3fb;
+       mx3fbi->blank           = FB_BLANK_NORMAL;
+
+       init_completion(&mx3fbi->flip_cmpl);
+       disable_irq(ichan->eof_irq);
+       dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
+       ret = mx3fb_set_par(fbi);
+       if (ret < 0)
+               goto esetpar;
+
+       mx3fb_blank(FB_BLANK_UNBLANK, fbi);
+
+       dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
+
+       ret = register_framebuffer(fbi);
+       if (ret < 0)
+               goto erfb;
+
+       return 0;
+
+erfb:
+esetpar:
+emode:
+       fb_dealloc_cmap(&fbi->cmap);
+       framebuffer_release(fbi);
+
+       return ret;
+}
+
+static bool chan_filter(struct dma_chan *chan, void *arg)
+{
+       struct dma_chan_request *rq = arg;
+       struct device *dev;
+       struct mx3fb_platform_data *mx3fb_pdata;
+
+       if (!rq)
+               return false;
+
+       dev = rq->mx3fb->dev;
+       mx3fb_pdata = dev->platform_data;
+
+       return rq->id == chan->chan_id &&
+               mx3fb_pdata->dma_dev == chan->device->dev;
+}
+
+static void release_fbi(struct fb_info *fbi)
+{
+       mx3fb_unmap_video_memory(fbi);
+
+       fb_dealloc_cmap(&fbi->cmap);
+
+       unregister_framebuffer(fbi);
+       framebuffer_release(fbi);
+}
+
+static int mx3fb_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       int ret;
+       struct resource *sdc_reg;
+       struct mx3fb_data *mx3fb;
+       dma_cap_mask_t mask;
+       struct dma_chan *chan;
+       struct dma_chan_request rq;
+
+       /*
+        * Display Interface (DI) and Synchronous Display Controller (SDC)
+        * registers
+        */
+       sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!sdc_reg)
+               return -EINVAL;
+
+       mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL);
+       if (!mx3fb)
+               return -ENOMEM;
+
+       spin_lock_init(&mx3fb->lock);
+
+       mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg));
+       if (!mx3fb->reg_base) {
+               ret = -ENOMEM;
+               goto eremap;
+       }
+
+       pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end,
+                mx3fb->reg_base);
+
+       /* IDMAC interface */
+       dmaengine_get();
+
+       mx3fb->dev = dev;
+       platform_set_drvdata(pdev, mx3fb);
+
+       rq.mx3fb = mx3fb;
+
+       dma_cap_zero(mask);
+       dma_cap_set(DMA_SLAVE, mask);
+       dma_cap_set(DMA_PRIVATE, mask);
+       rq.id = IDMAC_SDC_0;
+       chan = dma_request_channel(mask, chan_filter, &rq);
+       if (!chan) {
+               ret = -EBUSY;
+               goto ersdc0;
+       }
+
+       ret = init_fb_chan(mx3fb, to_idmac_chan(chan));
+       if (ret < 0)
+               goto eisdc0;
+
+       mx3fb->backlight_level = 255;
+
+       return 0;
+
+eisdc0:
+       dma_release_channel(chan);
+ersdc0:
+       dmaengine_put();
+       iounmap(mx3fb->reg_base);
+eremap:
+       kfree(mx3fb);
+       dev_err(dev, "mx3fb: failed to register fb\n");
+       return ret;
+}
+
+static int mx3fb_remove(struct platform_device *dev)
+{
+       struct mx3fb_data *mx3fb = platform_get_drvdata(dev);
+       struct fb_info *fbi = mx3fb->fbi;
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       struct dma_chan *chan;
+
+       chan = &mx3_fbi->idmac_channel->dma_chan;
+       release_fbi(fbi);
+
+       dma_release_channel(chan);
+       dmaengine_put();
+
+       iounmap(mx3fb->reg_base);
+       kfree(mx3fb);
+       return 0;
+}
+
+static struct platform_driver mx3fb_driver = {
+       .driver = {
+                  .name = MX3FB_NAME,
+       },
+       .probe = mx3fb_probe,
+       .remove = mx3fb_remove,
+       .suspend = mx3fb_suspend,
+       .resume = mx3fb_resume,
+};
+
+/*
+ * Parse user specified options (`video=mx3fb:')
+ * example:
+ *     video=mx3fb:bpp=16
+ */
+static int mx3fb_setup(void)
+{
+#ifndef MODULE
+       char *opt, *options = NULL;
+
+       if (fb_get_options("mx3fb", &options))
+               return -ENODEV;
+
+       if (!options || !*options)
+               return 0;
+
+       while ((opt = strsep(&options, ",")) != NULL) {
+               if (!*opt)
+                       continue;
+               if (!strncmp(opt, "bpp=", 4))
+                       default_bpp = simple_strtoul(opt + 4, NULL, 0);
+               else
+                       fb_mode = opt;
+       }
+#endif
+
+       return 0;
+}
+
+static int __init mx3fb_init(void)
+{
+       int ret = mx3fb_setup();
+
+       if (ret < 0)
+               return ret;
+
+       ret = platform_driver_register(&mx3fb_driver);
+       return ret;
+}
+
+static void __exit mx3fb_exit(void)
+{
+       platform_driver_unregister(&mx3fb_driver);
+}
+
+module_init(mx3fb_init);
+module_exit(mx3fb_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("MX3 framebuffer driver");
+MODULE_ALIAS("platform:" MX3FB_NAME);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/nvidia/nv_i2c.c
index 6fd7cb8f9b8e..6aaddb4f6788 100644
--- a/drivers/video/nvidia/nv_i2c.c
+++ b/drivers/video/nvidia/nv_i2c.c
@@ -87,7 +87,6 @@ static int nvidia_setup_i2c_bus(struct nvidia_i2c_chan *chan, const char *name,
 
         strcpy(chan->adapter.name, name);
         chan->adapter.owner = THIS_MODULE;
-        chan->adapter.id = I2C_HW_B_NVIDIA;
         chan->adapter.class = i2c_class;
         chan->adapter.algo_data = &chan->algo;
         chan->adapter.dev.parent = &chan->par->pci_dev->dev;
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index 6e2ea7518761..ab3949256677 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -800,14 +800,14 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode,
         /* FIXME:
          * According to errata some platforms have a clock rate limitiation
          */
-        lcdc.lcd_ck = clk_get(NULL, "lcd_ck");
+        lcdc.lcd_ck = clk_get(fbdev->dev, "lcd_ck");
         if (IS_ERR(lcdc.lcd_ck)) {
                 dev_err(fbdev->dev, "unable to access LCD clock\n");
                 r = PTR_ERR(lcdc.lcd_ck);
                 goto fail0;
         }
 
-        tc_ck = clk_get(NULL, "tc_ck");
+        tc_ck = clk_get(fbdev->dev, "tc_ck");
         if (IS_ERR(tc_ck)) {
                 dev_err(fbdev->dev, "unable to access TC clock\n");
                 r = PTR_ERR(tc_ck);
diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c
index 783d4adffb93..574b29e9f8f2 100644
--- a/drivers/video/savage/savagefb-i2c.c
+++ b/drivers/video/savage/savagefb-i2c.c
@@ -137,7 +137,6 @@ static int savage_setup_i2c_bus(struct savagefb_i2c_chan *chan,
         if (chan->par) {
                 strcpy(chan->adapter.name, name);
                 chan->adapter.owner             = THIS_MODULE;
-                chan->adapter.id                = I2C_HW_B_SAVAGE;
                 chan->adapter.algo_data         = &chan->algo;
                 chan->adapter.dev.parent        = &chan->par->pcidev->dev;
                 chan->algo.udelay               = 10;
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 3efa12f9ee50..09a3d5522b43 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -187,10 +187,10 @@ config EP93XX_WATCHDOG
 
 config OMAP_WATCHDOG
         tristate "OMAP Watchdog"
-        depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+        depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
         help
-          Support for TI OMAP1610/OMAP1710/OMAP2420 watchdog.  Say 'Y' here to
-          enable the OMAP1610/OMAP1710 watchdog timer.
+          Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog.  Say 'Y'
+          here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer.
 
 config PNX4008_WATCHDOG
         tristate "PNX4008 Watchdog"
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 993e5f52afef..5531691f46ea 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -13,6 +13,7 @@
 #include <linux/errno.h>
 #include <linux/fs.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 8dc7109d61b7..2ba8f95516a0 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -298,6 +298,14 @@ static int decrease_reservation(unsigned long nr_pages)
                 frame_list[i] = pfn_to_mfn(pfn);
 
                 scrub_page(page);
+
+                if (!PageHighMem(page)) {
+                        ret = HYPERVISOR_update_va_mapping(
+                                (unsigned long)__va(pfn << PAGE_SHIFT),
+                                __pte_ma(0), 0);
+                        BUG_ON(ret);
+                }
+
         }
 
         /* Ensure that ballooned highmem pages don't have kmaps. */
diff --git a/drivers/xen/xenfs/xenbus.c b/drivers/xen/xenfs/xenbus.c
index 875a4c59c594..a9592d981b10 100644
--- a/drivers/xen/xenfs/xenbus.c
+++ b/drivers/xen/xenfs/xenbus.c
@@ -291,7 +291,7 @@ static void watch_fired(struct xenbus_watch *watch,
 static int xenbus_write_transaction(unsigned msg_type,
                                     struct xenbus_file_priv *u)
 {
-        int rc, ret;
+        int rc;
         void *reply;
         struct xenbus_transaction_holder *trans = NULL;
         LIST_HEAD(staging_q);
@@ -326,15 +326,14 @@ static int xenbus_write_transaction(unsigned msg_type,
         }
 
         mutex_lock(&u->reply_mutex);
-        ret = queue_reply(&staging_q, &u->u.msg, sizeof(u->u.msg));
-        if (!ret)
-                ret = queue_reply(&staging_q, reply, u->u.msg.len);
-        if (!ret) {
+        rc = queue_reply(&staging_q, &u->u.msg, sizeof(u->u.msg));
+        if (!rc)
+                rc = queue_reply(&staging_q, reply, u->u.msg.len);
+        if (!rc) {
                 list_splice_tail(&staging_q, &u->read_buffers);
                 wake_up(&u->read_waitq);
         } else {
                 queue_cleanup(&staging_q);
-                rc = ret;
         }
         mutex_unlock(&u->reply_mutex);
 
diff --git a/fs/9p/Kconfig b/fs/9p/Kconfig
new file mode 100644
index 000000000000..74e0723e90bc
--- /dev/null
+++ b/fs/9p/Kconfig
@@ -0,0 +1,10 @@
+config 9P_FS
+        tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)"
+        depends on INET && NET_9P && EXPERIMENTAL
+        help
+          If you say Y here, you will get experimental support for
+          Plan 9 resource sharing via the 9P2000 protocol.
+
+          See <http://v9fs.sf.net> for more information.
+
+          If unsure, say N.
diff --git a/fs/Kconfig b/fs/Kconfig
index 51307b0fdf0f..93945dd0b1ae 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -27,141 +27,8 @@ config FS_MBCACHE
         default y if EXT4_FS=y && EXT4_FS_XATTR
         default m if EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR
 
-config REISERFS_FS
-        tristate "Reiserfs support"
-        help
-          Stores not just filenames but the files themselves in a balanced
-          tree.  Uses journalling.
-
-          Balanced trees are more efficient than traditional file system
-          architectural foundations.
-
-          In general, ReiserFS is as fast as ext2, but is very efficient with
-          large directories and small files.  Additional patches are needed
-          for NFS and quotas, please see <http://www.namesys.com/> for links.
-
-          It is more easily extended to have features currently found in
-          database and keyword search systems than block allocation based file
-          systems are.  The next version will be so extended, and will support
-          plugins consistent with our motto ``It takes more than a license to
-          make source code open.''
-
-          Read <http://www.namesys.com/> to learn more about reiserfs.
-
-          Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
-
-          If you like it, you can pay us to add new features to it that you
-          need, buy a support contract, or pay us to port it to another OS.
-
-config REISERFS_CHECK
-        bool "Enable reiserfs debug mode"
-        depends on REISERFS_FS
-        help
-          If you set this to Y, then ReiserFS will perform every check it can
-          possibly imagine of its internal consistency throughout its
-          operation.  It will also go substantially slower.  More than once we
-          have forgotten that this was on, and then gone despondent over the
-          latest benchmarks.:-) Use of this option allows our team to go all
-          out in checking for consistency when debugging without fear of its
-          effect on end users.  If you are on the verge of sending in a bug
-          report, say Y and you might get a useful error message.  Almost
-          everyone should say N.
-
-config REISERFS_PROC_INFO
-        bool "Stats in /proc/fs/reiserfs"
-        depends on REISERFS_FS && PROC_FS
-        help
-          Create under /proc/fs/reiserfs a hierarchy of files, displaying
-          various ReiserFS statistics and internal data at the expense of
-          making your kernel or module slightly larger (+8 KB). This also
-          increases the amount of kernel memory required for each mount.
-          Almost everyone but ReiserFS developers and people fine-tuning
-          reiserfs or tracing problems should say N.
-
-config REISERFS_FS_XATTR
-        bool "ReiserFS extended attributes"
-        depends on REISERFS_FS
-        help
-          Extended attributes are name:value pairs associated with inodes by
-          the kernel or by users (see the attr(5) manual page, or visit
-          <http://acl.bestbits.at/> for details).
-
-          If unsure, say N.
-
-config REISERFS_FS_POSIX_ACL
-        bool "ReiserFS POSIX Access Control Lists"
-        depends on REISERFS_FS_XATTR
-        select FS_POSIX_ACL
-        help
-          Posix Access Control Lists (ACLs) support permissions for users and
-          groups beyond the owner/group/world scheme.
-
-          To learn more about Access Control Lists, visit the Posix ACLs for
-          Linux website <http://acl.bestbits.at/>.
-
-          If you don't know what Access Control Lists are, say N
-
-config REISERFS_FS_SECURITY
-        bool "ReiserFS Security Labels"
-        depends on REISERFS_FS_XATTR
-        help
-          Security labels support alternative access control models
-          implemented by security modules like SELinux.  This option
-          enables an extended attribute handler for file security
-          labels in the ReiserFS filesystem.
-
-          If you are not using a security module that requires using
-          extended attributes for file security labels, say N.
-
-config JFS_FS
-        tristate "JFS filesystem support"
-        select NLS
-        help
-          This is a port of IBM's Journaled Filesystem .  More information is
-          available in the file <file:Documentation/filesystems/jfs.txt>.
-
-          If you do not intend to use the JFS filesystem, say N.
-
-config JFS_POSIX_ACL
-        bool "JFS POSIX Access Control Lists"
-        depends on JFS_FS
-        select FS_POSIX_ACL
-        help
-          Posix Access Control Lists (ACLs) support permissions for users and
-          groups beyond the owner/group/world scheme.
-
-          To learn more about Access Control Lists, visit the Posix ACLs for
-          Linux website <http://acl.bestbits.at/>.
-
-          If you don't know what Access Control Lists are, say N
-
-config JFS_SECURITY
-        bool "JFS Security Labels"
-        depends on JFS_FS
-        help
-          Security labels support alternative access control models
-          implemented by security modules like SELinux.  This option
-          enables an extended attribute handler for file security
-          labels in the jfs filesystem.
-
-          If you are not using a security module that requires using
-          extended attributes for file security labels, say N.
-
-config JFS_DEBUG
-        bool "JFS debugging"
-        depends on JFS_FS
-        help
-          If you are experiencing any problems with the JFS filesystem, say
-          Y here.  This will result in additional debugging messages to be
-          written to the system log.  Under normal circumstances, this
-          results in very little overhead.
-
-config JFS_STATISTICS
-        bool "JFS statistics"
-        depends on JFS_FS
-        help
-          Enabling this option will cause statistics from the JFS file system
-          to be made available to the user in the /proc/fs/jfs/ directory.
+source "fs/reiserfs/Kconfig"
+source "fs/jfs/Kconfig"
 
 config FS_POSIX_ACL
 # Posix ACL utility routines (for now, only ext2/ext3/jfs/reiserfs/nfs4)
@@ -182,111 +49,8 @@ config FILE_LOCKING
 
 source "fs/xfs/Kconfig"
 source "fs/gfs2/Kconfig"
-
-config OCFS2_FS
-        tristate "OCFS2 file system support"
-        depends on NET && SYSFS
-        select CONFIGFS_FS
-        select JBD2
-        select CRC32
-        select QUOTA
-        select QUOTA_TREE
-        help
-          OCFS2 is a general purpose extent based shared disk cluster file
-          system with many similarities to ext3. It supports 64 bit inode
-          numbers, and has automatically extending metadata groups which may
-          also make it attractive for non-clustered use.
-
-          You'll want to install the ocfs2-tools package in order to at least
-          get "mount.ocfs2".
-
-          Project web page:    http://oss.oracle.com/projects/ocfs2
-          Tools web page:      http://oss.oracle.com/projects/ocfs2-tools
-          OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
-
-          For more information on OCFS2, see the file
-          <file:Documentation/filesystems/ocfs2.txt>.
-
-config OCFS2_FS_O2CB
-        tristate "O2CB Kernelspace Clustering"
-        depends on OCFS2_FS
-        default y
-        help
-          OCFS2 includes a simple kernelspace clustering package, the OCFS2
-          Cluster Base.  It only requires a very small userspace component
-          to configure it. This comes with the standard ocfs2-tools package.
-          O2CB is limited to maintaining a cluster for OCFS2 file systems.
-          It cannot manage any other cluster applications.
-
-          It is always safe to say Y here, as the clustering method is
-          run-time selectable.
-
-config OCFS2_FS_USERSPACE_CLUSTER
-        tristate "OCFS2 Userspace Clustering"
-        depends on OCFS2_FS && DLM
-        default y
-        help
-          This option will allow OCFS2 to use userspace clustering services
-          in conjunction with the DLM in fs/dlm.  If you are using a
-          userspace cluster manager, say Y here.
-
-          It is safe to say Y, as the clustering method is run-time
-          selectable.
-
-config OCFS2_FS_STATS
-        bool "OCFS2 statistics"
-        depends on OCFS2_FS
-        default y
-        help
-          This option allows some fs statistics to be captured. Enabling
-          this option may increase the memory consumption.
-
-config OCFS2_DEBUG_MASKLOG
-        bool "OCFS2 logging support"
-        depends on OCFS2_FS
-        default y
-        help
-          The ocfs2 filesystem has an extensive logging system.  The system
-          allows selection of events to log via files in /sys/o2cb/logmask/.
-          This option will enlarge your kernel, but it allows debugging of
-          ocfs2 filesystem issues.
-
-config OCFS2_DEBUG_FS
-        bool "OCFS2 expensive checks"
-        depends on OCFS2_FS
-        default n
-        help
-          This option will enable expensive consistency checks. Enable
-          this option for debugging only as it is likely to decrease
-          performance of the filesystem.
-
-config OCFS2_FS_POSIX_ACL
-        bool "OCFS2 POSIX Access Control Lists"
-        depends on OCFS2_FS
-        select FS_POSIX_ACL
-        default n
-        help
-          Posix Access Control Lists (ACLs) support permissions for users and
-          groups beyond the owner/group/world scheme.
-
-config BTRFS_FS
-        tristate "Btrfs filesystem (EXPERIMENTAL) Unstable disk format"
-        depends on EXPERIMENTAL
-        select LIBCRC32C
-        select ZLIB_INFLATE
-        select ZLIB_DEFLATE
-        help
-          Btrfs is a new filesystem with extents, writable snapshotting,
-          support for multiple devices and many more features.
-
-          Btrfs is highly experimental, and THE DISK FORMAT IS NOT YET
-          FINALIZED.  You should say N here unless you are interested in
-          testing Btrfs with non-critical data.
-
-          To compile this file system support as a module, choose M here. The
-          module will be called btrfs.
-
-          If unsure, say N.
+source "fs/ocfs2/Kconfig"
+source "fs/btrfs/Kconfig"
 
 endif # BLOCK
 
@@ -348,64 +112,9 @@ config QUOTACTL
         depends on XFS_QUOTA || QUOTA
         default y
 
-config AUTOFS_FS
-        tristate "Kernel automounter support"
-        help
-          The automounter is a tool to automatically mount remote file systems
-          on demand. This implementation is partially kernel-based to reduce
-          overhead in the already-mounted case; this is unlike the BSD
-          automounter (amd), which is a pure user space daemon.
-
-          To use the automounter you need the user-space tools from the autofs
-          package; you can find the location in <file:Documentation/Changes>.
-          You also want to answer Y to "NFS file system support", below.
-
-          If you want to use the newer version of the automounter with more
-          features, say N here and say Y to "Kernel automounter v4 support",
-          below.
-
-          To compile this support as a module, choose M here: the module will be
-          called autofs.
-
-          If you are not a part of a fairly large, distributed network, you
-          probably do not need an automounter, and can say N here.
-
-config AUTOFS4_FS
-        tristate "Kernel automounter version 4 support (also supports v3)"
-        help
-          The automounter is a tool to automatically mount remote file systems
-          on demand. This implementation is partially kernel-based to reduce
-          overhead in the already-mounted case; this is unlike the BSD
-          automounter (amd), which is a pure user space daemon.
-
-          To use the automounter you need the user-space tools from
-          <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also
-          want to answer Y to "NFS file system support", below.
-
-          To compile this support as a module, choose M here: the module will be
-          called autofs4.  You will need to add "alias autofs autofs4" to your
-          modules configuration file.
-
-          If you are not a part of a fairly large, distributed network or
-          don't have a laptop which needs to dynamically reconfigure to the
-          local network, you probably do not need an automounter, and can say
-          N here.
-
-config FUSE_FS
-        tristate "FUSE (Filesystem in Userspace) support"
-        help
-          With FUSE it is possible to implement a fully functional filesystem
-          in a userspace program.
-
-          There's also companion library: libfuse.  This library along with
-          utilities is available from the FUSE homepage:
-          <http://fuse.sourceforge.net/>
-
-          See <file:Documentation/filesystems/fuse.txt> for more information.
-          See <file:Documentation/Changes> for needed library/utility version.
-
-          If you want to develop a userspace FS, or if you want to use
-          a filesystem based on FUSE, answer Y or M.
+source "fs/autofs/Kconfig"
+source "fs/autofs4/Kconfig"
+source "fs/fuse/Kconfig"
 
 config GENERIC_ACL
         bool
@@ -414,64 +123,8 @@ config GENERIC_ACL
 if BLOCK
 menu "CD-ROM/DVD Filesystems"
 
-config ISO9660_FS
-        tristate "ISO 9660 CDROM file system support"
-        help
-          This is the standard file system used on CD-ROMs.  It was previously
-          known as "High Sierra File System" and is called "hsfs" on other
-          Unix systems.  The so-called Rock-Ridge extensions which allow for
-          long Unix filenames and symbolic links are also supported by this
-          driver.  If you have a CD-ROM drive and want to do more with it than
-          just listen to audio CDs and watch its LEDs, say Y (and read
-          <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
-          available from <http://www.tldp.org/docs.html#howto>), thereby
-          enlarging your kernel by about 27 KB; otherwise say N.
-
-          To compile this file system support as a module, choose M here: the
-          module will be called isofs.
-
-config JOLIET
-        bool "Microsoft Joliet CDROM extensions"
-        depends on ISO9660_FS
-        select NLS
-        help
-          Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
-          which allows for long filenames in unicode format (unicode is the
-          new 16 bit character code, successor to ASCII, which encodes the
-          characters of almost all languages of the world; see
-          <http://www.unicode.org/> for more information).  Say Y here if you
-          want to be able to read Joliet CD-ROMs under Linux.
-
-config ZISOFS
-        bool "Transparent decompression extension"
-        depends on ISO9660_FS
-        select ZLIB_INFLATE
-        help
-          This is a Linux-specific extension to RockRidge which lets you store
-          data in compressed form on a CD-ROM and have it transparently
-          decompressed when the CD-ROM is accessed.  See
-          <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
-          necessary to create such a filesystem.  Say Y here if you want to be
-          able to read such compressed CD-ROMs.
-
-config UDF_FS
-        tristate "UDF file system support"
-        select CRC_ITU_T
-        help
-          This is the new file system used on some CD-ROMs and DVDs. Say Y if
-          you intend to mount DVD discs or CDRW's written in packet mode, or
-          if written to by other UDF utilities, such as DirectCD.
-          Please read <file:Documentation/filesystems/udf.txt>.
-
-          To compile this file system support as a module, choose M here: the
-          module will be called udf.
-
-          If unsure, say N.
-
-config UDF_NLS
-        bool
-        default y
-        depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
+source "fs/isofs/Kconfig"
+source "fs/udf/Kconfig"
 
 endmenu
 endif # BLOCK
@@ -479,182 +132,8 @@ endif # BLOCK
 if BLOCK
 menu "DOS/FAT/NT Filesystems"
 
-config FAT_FS
-        tristate
-        select NLS
-        help
-          If you want to use one of the FAT-based file systems (the MS-DOS and
-          VFAT (Windows 95) file systems), then you must say Y or M here
-          to include FAT support. You will then be able to mount partitions or
-          diskettes with FAT-based file systems and transparently access the
-          files on them, i.e. MSDOS files will look and behave just like all
-          other Unix files.
-
-          This FAT support is not a file system in itself, it only provides
-          the foundation for the other file systems. You will have to say Y or
-          M to at least one of "MSDOS fs support" or "VFAT fs support" in
-          order to make use of it.
-
-          Another way to read and write MSDOS floppies and hard drive
-          partitions from within Linux (but not transparently) is with the
-          mtools ("man mtools") program suite. You don't need to say Y here in
-          order to do that.
-
-          If you need to move large files on floppies between a DOS and a
-          Linux box, say Y here, mount the floppy under Linux with an MSDOS
-          file system and use GNU tar's M option. GNU tar is a program
-          available for Unix and DOS ("man tar" or "info tar").
-
-          The FAT support will enlarge your kernel by about 37 KB. If unsure,
-          say Y.
-
-          To compile this as a module, choose M here: the module will be called
-          fat.  Note that if you compile the FAT support as a module, you
-          cannot compile any of the FAT-based file systems into the kernel
-          -- they will have to be modules as well.
-
-config MSDOS_FS
-        tristate "MSDOS fs support"
-        select FAT_FS
-        help
-          This allows you to mount MSDOS partitions of your hard drive (unless
-          they are compressed; to access compressed MSDOS partitions under
-          Linux, you can either use the DOS emulator DOSEMU, described in the
-          DOSEMU-HOWTO, available from
-          <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
-          <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
-          intend to use dosemu with a non-compressed MSDOS partition, say Y
-          here) and MSDOS floppies. This means that file access becomes
-          transparent, i.e. the MSDOS files look and behave just like all
-          other Unix files.
-
-          If you have Windows 95 or Windows NT installed on your MSDOS
-          partitions, you should use the VFAT file system (say Y to "VFAT fs
-          support" below), or you will not be able to see the long filenames
-          generated by Windows 95 / Windows NT.
-
-          This option will enlarge your kernel by about 7 KB. If unsure,
-          answer Y. This will only work if you said Y to "DOS FAT fs support"
-          as well. To compile this as a module, choose M here: the module will
-          be called msdos.
-
-config VFAT_FS
-        tristate "VFAT (Windows-95) fs support"
-        select FAT_FS
-        help
-          This option provides support for normal Windows file systems with
-          long filenames.  That includes non-compressed FAT-based file systems
-          used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
-          programs from the mtools package.
-
-          The VFAT support enlarges your kernel by about 10 KB and it only
-          works if you said Y to the "DOS FAT fs support" above.  Please read
-          the file <file:Documentation/filesystems/vfat.txt> for details.  If
-          unsure, say Y.
-
-          To compile this as a module, choose M here: the module will be called
-          vfat.
-
-config FAT_DEFAULT_CODEPAGE
-        int "Default codepage for FAT"
-        depends on MSDOS_FS || VFAT_FS
-        default 437
-        help
-          This option should be set to the codepage of your FAT filesystems.
-          It can be overridden with the "codepage" mount option.
-          See <file:Documentation/filesystems/vfat.txt> for more information.
-
-config FAT_DEFAULT_IOCHARSET
-        string "Default iocharset for FAT"
-        depends on VFAT_FS
-        default "iso8859-1"
-        help
-          Set this to the default input/output character set you'd
-          like FAT to use. It should probably match the character set
-          that most of your FAT filesystems use, and can be overridden
-          with the "iocharset" mount option for FAT filesystems.
-          Note that "utf8" is not recommended for FAT filesystems.
-          If unsure, you shouldn't set "utf8" here.
-          See <file:Documentation/filesystems/vfat.txt> for more information.
-
-config NTFS_FS
-        tristate "NTFS file system support"
-        select NLS
-        help
-          NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003.
-
-          Saying Y or M here enables read support.  There is partial, but
-          safe, write support available.  For write support you must also
-          say Y to "NTFS write support" below.
-
-          There are also a number of user-space tools available, called
-          ntfsprogs.  These include ntfsundelete and ntfsresize, that work
-          without NTFS support enabled in the kernel.
-
-          This is a rewrite from scratch of Linux NTFS support and replaced
-          the old NTFS code starting with Linux 2.5.11.  A backport to
-          the Linux 2.4 kernel series is separately available as a patch
-          from the project web site.
-
-          For more information see <file:Documentation/filesystems/ntfs.txt>
-          and <http://www.linux-ntfs.org/>.
-
-          To compile this file system support as a module, choose M here: the
-          module will be called ntfs.
-
-          If you are not using Windows NT, 2000, XP or 2003 in addition to
-          Linux on your computer it is safe to say N.
-
-config NTFS_DEBUG
-        bool "NTFS debugging support"
-        depends on NTFS_FS
-        help
-          If you are experiencing any problems with the NTFS file system, say
-          Y here.  This will result in additional consistency checks to be
-          performed by the driver as well as additional debugging messages to
-          be written to the system log.  Note that debugging messages are
-          disabled by default.  To enable them, supply the option debug_msgs=1
-          at the kernel command line when booting the kernel or as an option
-          to insmod when loading the ntfs module.  Once the driver is active,
-          you can enable debugging messages by doing (as root):
-          echo 1 > /proc/sys/fs/ntfs-debug
-          Replacing the "1" with "0" would disable debug messages.
-
-          If you leave debugging messages disabled, this results in little
-          overhead, but enabling debug messages results in very significant
-          slowdown of the system.
-
-          When reporting bugs, please try to have available a full dump of
-          debugging messages while the misbehaviour was occurring.
-
-config NTFS_RW
-        bool "NTFS write support"
-        depends on NTFS_FS
-        help
-          This enables the partial, but safe, write support in the NTFS driver.
-
-          The only supported operation is overwriting existing files, without
-          changing the file length.  No file or directory creation, deletion or
-          renaming is possible.  Note only non-resident files can be written to
-          so you may find that some very small files (<500 bytes or so) cannot
-          be written to.
-
-          While we cannot guarantee that it will not damage any data, we have
-          so far not received a single report where the driver would have
-          damaged someones data so we assume it is perfectly safe to use.
-
-          Note:  While write support is safe in this version (a rewrite from
-          scratch of the NTFS support), it should be noted that the old NTFS
-          write support, included in Linux 2.5.10 and before (since 1997),
-          is not safe.
-
-          This is currently useful with TopologiLinux.  TopologiLinux is run
-          on top of any DOS/Microsoft Windows system without partitioning your
-          hard disk.  Unlike other Linux distributions TopologiLinux does not
-          need its own partition.  For more information see
-          <http://topologi-linux.sourceforge.net/>
-
-          It is perfectly safe to say N here.
+source "fs/fat/Kconfig"
+source "fs/ntfs/Kconfig"
 
 endmenu
 endif # BLOCK
@@ -662,30 +141,7 @@ endif # BLOCK
 menu "Pseudo filesystems"
 
 source "fs/proc/Kconfig"
-
-config SYSFS
-        bool "sysfs file system support" if EMBEDDED
-        default y
-        help
-        The sysfs filesystem is a virtual filesystem that the kernel uses to
-        export internal kernel objects, their attributes, and their
-        relationships to one another.
-
-        Users can use sysfs to ascertain useful information about the running
-        kernel, such as the devices the kernel has discovered on each bus and
-        which driver each is bound to. sysfs can also be used to tune devices
-        and other kernel subsystems.
-
-        Some system agents rely on the information in sysfs to operate.
-        /sbin/hotplug uses device and object attributes in sysfs to assist in
-        delegating policy decisions, like persistently naming devices.
-
-        sysfs is currently used by the block subsystem to mount the root
-        partition.  If sysfs is disabled you must specify the boot device on
-        the kernel boot command line via its major and minor numbers.  For
-        example, "root=03:01" for /dev/hda1.
-
-        Designers of embedded systems may wish to say N here to conserve space.
+source "fs/sysfs/Kconfig"
 
 config TMPFS
         bool "Virtual memory file system support (former shm fs)"
@@ -726,17 +182,7 @@ config HUGETLBFS
 config HUGETLB_PAGE
         def_bool HUGETLBFS
 
-config CONFIGFS_FS
-        tristate "Userspace-driven configuration filesystem"
-        depends on SYSFS
-        help
-          configfs is a ram-based filesystem that provides the converse
-          of sysfs's functionality. Where sysfs is a filesystem-based
-          view of kernel objects, configfs is a filesystem-based manager
-          of kernel objects, or config_items.
-
-          Both sysfs and configfs can and should exist together on the
-          same system. One is not a replacement for the other.
+source "fs/configfs/Kconfig"
 
 endmenu
 
@@ -755,425 +201,27 @@ menuconfig MISC_FILESYSTEMS
 
 if MISC_FILESYSTEMS
 
-config ADFS_FS
-        tristate "ADFS file system support (EXPERIMENTAL)"
-        depends on BLOCK && EXPERIMENTAL
-        help
-          The Acorn Disc Filing System is the standard file system of the
-          RiscOS operating system which runs on Acorn's ARM-based Risc PC
-          systems and the Acorn Archimedes range of machines. If you say Y
-          here, Linux will be able to read from ADFS partitions on hard drives
-          and from ADFS-formatted floppy discs. If you also want to be able to
-          write to those devices, say Y to "ADFS write support" below.
-
-          The ADFS partition should be the first partition (i.e.,
-          /dev/[hs]d?1) on each of your drives. Please read the file
-          <file:Documentation/filesystems/adfs.txt> for further details.
-
-          To compile this code as a module, choose M here: the module will be
-          called adfs.
-
-          If unsure, say N.
-
-config ADFS_FS_RW
-        bool "ADFS write support (DANGEROUS)"
-        depends on ADFS_FS
-        help
-          If you say Y here, you will be able to write to ADFS partitions on
-          hard drives and ADFS-formatted floppy disks. This is experimental
-          codes, so if you're unsure, say N.
-
-config AFFS_FS
-        tristate "Amiga FFS file system support (EXPERIMENTAL)"
-        depends on BLOCK && EXPERIMENTAL
-        help
-          The Fast File System (FFS) is the common file system used on hard
-          disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20).  Say Y
-          if you want to be able to read and write files from and to an Amiga
-          FFS partition on your hard drive.  Amiga floppies however cannot be
-          read with this driver due to an incompatibility of the floppy
-          controller used in an Amiga and the standard floppy controller in
-          PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
-          and <file:fs/affs/Changes>.
-
-          With this driver you can also mount disk files used by Bernd
-          Schmidt's Un*X Amiga Emulator
-          (<http://www.freiburg.linux.de/~uae/>).
-          If you want to do this, you will also need to say Y or M to "Loop
-          device support", above.
-
-          To compile this file system support as a module, choose M here: the
-          module will be called affs.  If unsure, say N.
-
-config ECRYPT_FS
-        tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
-        depends on EXPERIMENTAL && KEYS && CRYPTO && NET
-        help
-          Encrypted filesystem that operates on the VFS layer.  See
-          <file:Documentation/filesystems/ecryptfs.txt> to learn more about
-          eCryptfs.  Userspace components are required and can be
-          obtained from <http://ecryptfs.sf.net>.
-
-          To compile this file system support as a module, choose M here: the
-          module will be called ecryptfs.
-
-config HFS_FS
-        tristate "Apple Macintosh file system support (EXPERIMENTAL)"
-        depends on BLOCK && EXPERIMENTAL
-        select NLS
-        help
-          If you say Y here, you will be able to mount Macintosh-formatted
-          floppy disks and hard drive partitions with full read-write access.
-          Please read <file:Documentation/filesystems/hfs.txt> to learn about
-          the available mount options.
-
-          To compile this file system support as a module, choose M here: the
-          module will be called hfs.
-
-config HFSPLUS_FS
-        tristate "Apple Extended HFS file system support"
-        depends on BLOCK
-        select NLS
-        select NLS_UTF8
-        help
-          If you say Y here, you will be able to mount extended format
-          Macintosh-formatted hard drive partitions with full read-write access.
-
-          This file system is often called HFS+ and was introduced with
-          MacOS 8. It includes all Mac specific filesystem data such as
-          data forks and creator codes, but it also has several UNIX
-          style features such as file ownership and permissions.
-
-config BEFS_FS
-        tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)"
-        depends on BLOCK && EXPERIMENTAL
-        select NLS
-        help
-          The BeOS File System (BeFS) is the native file system of Be, Inc's
-          BeOS. Notable features include support for arbitrary attributes
-          on files and directories, and database-like indices on selected
-          attributes. (Also note that this driver doesn't make those features
-          available at this time). It is a 64 bit filesystem, so it supports
-          extremely large volumes and files.
-
-          If you use this filesystem, you should also say Y to at least one
-          of the NLS (native language support) options below.
-
-          If you don't know what this is about, say N.
-
-          To compile this as a module, choose M here: the module will be
-          called befs.
-
-config BEFS_DEBUG
-        bool "Debug BeFS"
-        depends on BEFS_FS
-        help
-          If you say Y here, you can use the 'debug' mount option to enable
-          debugging output from the driver.
-
-config BFS_FS
-        tristate "BFS file system support (EXPERIMENTAL)"
-        depends on BLOCK && EXPERIMENTAL
-        help
-          Boot File System (BFS) is a file system used under SCO UnixWare to
-          allow the bootloader access to the kernel image and other important
-          files during the boot process.  It is usually mounted under /stand
-          and corresponds to the slice marked as "STAND" in the UnixWare
-          partition.  You should say Y if you want to read or write the files
-          on your /stand slice from within Linux.  You then also need to say Y
-          to "UnixWare slices support", below.  More information about the BFS
-          file system is contained in the file
-          <file:Documentation/filesystems/bfs.txt>.
-
-          If you don't know what this is about, say N.
-
-          To compile this as a module, choose M here: the module will be called
-          bfs.  Note that the file system of your root partition (the one
-          containing the directory /) cannot be compiled as a module.
-
-
-
-config EFS_FS
-        tristate "EFS file system support (read only) (EXPERIMENTAL)"
-        depends on BLOCK && EXPERIMENTAL
-        help
-          EFS is an older file system used for non-ISO9660 CD-ROMs and hard
-          disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
-          uses the XFS file system for hard disk partitions however).
-
-          This implementation only offers read-only access. If you don't know
-          what all this is about, it's safe to say N. For more information
-          about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
-
-          To compile the EFS file system support as a module, choose M here: the
-          module will be called efs.
-
+source "fs/adfs/Kconfig"
+source "fs/affs/Kconfig"
+source "fs/ecryptfs/Kconfig"
+source "fs/hfs/Kconfig"
+source "fs/hfsplus/Kconfig"
+source "fs/befs/Kconfig"
+source "fs/bfs/Kconfig"
+source "fs/efs/Kconfig"
 source "fs/jffs2/Kconfig"
 # UBIFS File system configuration
 source "fs/ubifs/Kconfig"
-
-config CRAMFS
-        tristate "Compressed ROM file system support (cramfs)"
-        depends on BLOCK
-        select ZLIB_INFLATE
-        help
-          Saying Y here includes support for CramFs (Compressed ROM File
-          System).  CramFs is designed to be a simple, small, and compressed
-          file system for ROM based embedded systems.  CramFs is read-only,
-          limited to 256MB file systems (with 16MB files), and doesn't support
-          16/32 bits uid/gid, hard links and timestamps.
-
-          See <file:Documentation/filesystems/cramfs.txt> and
-          <file:fs/cramfs/README> for further information.
-
-          To compile this as a module, choose M here: the module will be called
-          cramfs.  Note that the root file system (the one containing the
-          directory /) cannot be compiled as a module.
-
-          If unsure, say N.
-
-config SQUASHFS
-        tristate "SquashFS 4.0 - Squashed file system support"
-        depends on BLOCK
-        select ZLIB_INFLATE
-        help
-          Saying Y here includes support for SquashFS 4.0 (a Compressed
-          Read-Only File System).  Squashfs is a highly compressed read-only
-          filesystem for Linux.  It uses zlib compression to compress both
-          files, inodes and directories.  Inodes in the system are very small
-          and all blocks are packed to minimise data overhead. Block sizes
-          greater than 4K are supported up to a maximum of 1 Mbytes (default
-          block size 128K).  SquashFS 4.0 supports 64 bit filesystems and files
-          (larger than 4GB), full uid/gid information, hard links and
-          timestamps.  
-
-          Squashfs is intended for general read-only filesystem use, for
-          archival use (i.e. in cases where a .tar.gz file may be used), and in
-          embedded systems where low overhead is needed.  Further information
-          and tools are available from http://squashfs.sourceforge.net.
-
-          If you want to compile this as a module ( = code which can be
-          inserted in and removed from the running kernel whenever you want),
-          say M here and read <file:Documentation/modules.txt>.  The module
-          will be called squashfs.  Note that the root file system (the one
-          containing the directory /) cannot be compiled as a module.
-
-          If unsure, say N.
-
-config SQUASHFS_EMBEDDED
-
-        bool "Additional option for memory-constrained systems" 
-        depends on SQUASHFS
-        default n
-        help
-          Saying Y here allows you to specify cache size.
-
-          If unsure, say N.
-
-config SQUASHFS_FRAGMENT_CACHE_SIZE
-        int "Number of fragments cached" if SQUASHFS_EMBEDDED
-        depends on SQUASHFS
-        default "3"
-        help
-          By default SquashFS caches the last 3 fragments read from
-          the filesystem.  Increasing this amount may mean SquashFS
-          has to re-read fragments less often from disk, at the expense
-          of extra system memory.  Decreasing this amount will mean
-          SquashFS uses less memory at the expense of extra reads from disk.
-
-          Note there must be at least one cached fragment.  Anything
-          much more than three will probably not make much difference.
-
-config VXFS_FS
-        tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
-        depends on BLOCK
-        help
-          FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
-          file system format.  VERITAS VxFS(TM) is the standard file system
-          of SCO UnixWare (and possibly others) and optionally available
-          for Sunsoft Solaris, HP-UX and many other operating systems.
-          Currently only readonly access is supported.
-
-          NOTE: the file system type as used by mount(1), mount(2) and
-          fstab(5) is 'vxfs' as it describes the file system format, not
-          the actual driver.
-
-          To compile this as a module, choose M here: the module will be
-          called freevxfs.  If unsure, say N.
-
-config MINIX_FS
-        tristate "Minix file system support"
-        depends on BLOCK
-        help
-          Minix is a simple operating system used in many classes about OS's.
-          The minix file system (method to organize files on a hard disk
-          partition or a floppy disk) was the original file system for Linux,
-          but has been superseded by the second extended file system ext2fs.
-          You don't want to use the minix file system on your hard disk
-          because of certain built-in restrictions, but it is sometimes found
-          on older Linux floppy disks.  This option will enlarge your kernel
-          by about 28 KB. If unsure, say N.
-
-          To compile this file system support as a module, choose M here: the
-          module will be called minix.  Note that the file system of your root
-          partition (the one containing the directory /) cannot be compiled as
-          a module.
-
-config OMFS_FS
-        tristate "SonicBlue Optimized MPEG File System support"
-        depends on BLOCK
-        select CRC_ITU_T
-        help
-          This is the proprietary file system used by the Rio Karma music
-          player and ReplayTV DVR.  Despite the name, this filesystem is not
-          more efficient than a standard FS for MPEG files, in fact likely
-          the opposite is true.  Say Y if you have either of these devices
-          and wish to mount its disk.
-
-          To compile this file system support as a module, choose M here: the
-          module will be called omfs.  If unsure, say N.
-
-config HPFS_FS
-        tristate "OS/2 HPFS file system support"
-        depends on BLOCK
-        help
-          OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
-          is the file system used for organizing files on OS/2 hard disk
-          partitions. Say Y if you want to be able to read files from and
-          write files to an OS/2 HPFS partition on your hard drive. OS/2
-          floppies however are in regular MSDOS format, so you don't need this
-          option in order to be able to read them. Read
-          <file:Documentation/filesystems/hpfs.txt>.
-
-          To compile this file system support as a module, choose M here: the
-          module will be called hpfs.  If unsure, say N.
-
-
-config QNX4FS_FS
-        tristate "QNX4 file system support (read only)"
-        depends on BLOCK
-        help
-          This is the file system used by the real-time operating systems
-          QNX 4 and QNX 6 (the latter is also called QNX RTP).
-          Further information is available at <http://www.qnx.com/>.
-          Say Y if you intend to mount QNX hard disks or floppies.
-          Unless you say Y to "QNX4FS read-write support" below, you will
-          only be able to read these file systems.
-
-          To compile this file system support as a module, choose M here: the
-          module will be called qnx4.
-
-          If you don't know whether you need it, then you don't need it:
-          answer N.
-
-config QNX4FS_RW
-        bool "QNX4FS write support (DANGEROUS)"
-        depends on QNX4FS_FS && EXPERIMENTAL && BROKEN
-        help
-          Say Y if you want to test write support for QNX4 file systems.
-
-          It's currently broken, so for now:
-          answer N.
-
-config ROMFS_FS
-        tristate "ROM file system support"
-        depends on BLOCK
-        ---help---
-          This is a very small read-only file system mainly intended for
-          initial ram disks of installation disks, but it could be used for
-          other read-only media as well.  Read
-          <file:Documentation/filesystems/romfs.txt> for details.
-
-          To compile this file system support as a module, choose M here: the
-          module will be called romfs.  Note that the file system of your
-          root partition (the one containing the directory /) cannot be a
-          module.
-
-          If you don't know whether you need it, then you don't need it:
-          answer N.
-
-
-config SYSV_FS
-        tristate "System V/Xenix/V7/Coherent file system support"
-        depends on BLOCK
-        help
-          SCO, Xenix and Coherent are commercial Unix systems for Intel
-          machines, and Version 7 was used on the DEC PDP-11. Saying Y
-          here would allow you to read from their floppies and hard disk
-          partitions.
-
-          If you have floppies or hard disk partitions like that, it is likely
-          that they contain binaries from those other Unix systems; in order
-          to run these binaries, you will want to install linux-abi which is
-          a set of kernel modules that lets you run SCO, Xenix, Wyse,
-          UnixWare, Dell Unix and System V programs under Linux.  It is
-          available via FTP (user: ftp) from
-          <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
-          NOTE: that will work only for binaries from Intel-based systems;
-          PDP ones will have to wait until somebody ports Linux to -11 ;-)
-
-          If you only intend to mount files from some other Unix over the
-          network using NFS, you don't need the System V file system support
-          (but you need NFS file system support obviously).
-
-          Note that this option is generally not needed for floppies, since a
-          good portable way to transport files and directories between unixes
-          (and even other operating systems) is given by the tar program ("man
-          tar" or preferably "info tar").  Note also that this option has
-          nothing whatsoever to do with the option "System V IPC". Read about
-          the System V file system in
-          <file:Documentation/filesystems/sysv-fs.txt>.
-          Saying Y here will enlarge your kernel by about 27 KB.
-
-          To compile this as a module, choose M here: the module will be called
-          sysv.
-
-          If you haven't heard about all of this before, it's safe to say N.
-
-
-config UFS_FS
-        tristate "UFS file system support (read only)"
-        depends on BLOCK
-        help
-          BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
-          OpenBSD and NeXTstep) use a file system called UFS. Some System V
-          Unixes can create and mount hard disk partitions and diskettes using
-          this file system as well. Saying Y here will allow you to read from
-          these partitions; if you also want to write to them, say Y to the
-          experimental "UFS file system write support", below. Please read the
-          file <file:Documentation/filesystems/ufs.txt> for more information.
-
-          The recently released UFS2 variant (used in FreeBSD 5.x) is
-          READ-ONLY supported.
-
-          Note that this option is generally not needed for floppies, since a
-          good portable way to transport files and directories between unixes
-          (and even other operating systems) is given by the tar program ("man
-          tar" or preferably "info tar").
-
-          When accessing NeXTstep files, you may need to convert them from the
-          NeXT character set to the Latin1 character set; use the program
-          recode ("info recode") for this purpose.
-
-          To compile the UFS file system support as a module, choose M here: the
-          module will be called ufs.
-
-          If you haven't heard about all of this before, it's safe to say N.
-
-config UFS_FS_WRITE
-        bool "UFS file system write support (DANGEROUS)"
-        depends on UFS_FS && EXPERIMENTAL
-        help
-          Say Y here if you want to try writing to UFS partitions. This is
-          experimental, so you should back up your UFS partitions beforehand.
-
-config UFS_DEBUG
-        bool "UFS debugging"
-        depends on UFS_FS
-        help
-          If you are experiencing any problems with the UFS filesystem, say
-          Y here.  This will result in _many_ additional debugging messages to be
-          written to the system log.
+source "fs/cramfs/Kconfig"
+source "fs/squashfs/Kconfig"
+source "fs/freevxfs/Kconfig"
+source "fs/minix/Kconfig"
+source "fs/omfs/Kconfig"
+source "fs/hpfs/Kconfig"
+source "fs/qnx4/Kconfig"
+source "fs/romfs/Kconfig"
+source "fs/sysv/Kconfig"
+source "fs/ufs/Kconfig"
 
 endif # MISC_FILESYSTEMS
 
@@ -1193,173 +241,8 @@ menuconfig NETWORK_FILESYSTEMS
 
 if NETWORK_FILESYSTEMS
 
-config NFS_FS
-        tristate "NFS client support"
-        depends on INET
-        select LOCKD
-        select SUNRPC
-        select NFS_ACL_SUPPORT if NFS_V3_ACL
-        help
-          Choose Y here if you want to access files residing on other
-          computers using Sun's Network File System protocol.  To compile
-          this file system support as a module, choose M here: the module
-          will be called nfs.
-
-          To mount file systems exported by NFS servers, you also need to
-          install the user space mount.nfs command which can be found in
-          the Linux nfs-utils package, available from http://linux-nfs.org/.
-          Information about using the mount command is available in the
-          mount(8) man page.  More detail about the Linux NFS client
-          implementation is available via the nfs(5) man page.
-
-          Below you can choose which versions of the NFS protocol are
-          available in the kernel to mount NFS servers.  Support for NFS
-          version 2 (RFC 1094) is always available when NFS_FS is selected.
-
-          To configure a system which mounts its root file system via NFS
-          at boot time, say Y here, select "Kernel level IP
-          autoconfiguration" in the NETWORK menu, and select "Root file
-          system on NFS" below.  You cannot compile this file system as a
-          module in this case.
-
-          If unsure, say N.
-
-config NFS_V3
-        bool "NFS client support for NFS version 3"
-        depends on NFS_FS
-        help
-          This option enables support for version 3 of the NFS protocol
-          (RFC 1813) in the kernel's NFS client.
-
-          If unsure, say Y.
-
-config NFS_V3_ACL
-        bool "NFS client support for the NFSv3 ACL protocol extension"
-        depends on NFS_V3
-        help
-          Some NFS servers support an auxiliary NFSv3 ACL protocol that
-          Sun added to Solaris but never became an official part of the
-          NFS version 3 protocol.  This protocol extension allows
-          applications on NFS clients to manipulate POSIX Access Control
-          Lists on files residing on NFS servers.  NFS servers enforce
-          ACLs on local files whether this protocol is available or not.
-
-          Choose Y here if your NFS server supports the Solaris NFSv3 ACL
-          protocol extension and you want your NFS client to allow
-          applications to access and modify ACLs on files on the server.
-
-          Most NFS servers don't support the Solaris NFSv3 ACL protocol
-          extension.  You can choose N here or specify the "noacl" mount
-          option to prevent your NFS client from trying to use the NFSv3
-          ACL protocol.
-
-          If unsure, say N.
-
-config NFS_V4
-        bool "NFS client support for NFS version 4 (EXPERIMENTAL)"
-        depends on NFS_FS && EXPERIMENTAL
-        select RPCSEC_GSS_KRB5
-        help
-          This option enables support for version 4 of the NFS protocol
-          (RFC 3530) in the kernel's NFS client.
-
-          To mount NFS servers using NFSv4, you also need to install user
-          space programs which can be found in the Linux nfs-utils package,
-          available from http://linux-nfs.org/.
-
-          If unsure, say N.
-
-config ROOT_NFS
-        bool "Root file system on NFS"
-        depends on NFS_FS=y && IP_PNP
-        help
-          If you want your system to mount its root file system via NFS,
-          choose Y here.  This is common practice for managing systems
-          without local permanent storage.  For details, read
-          <file:Documentation/filesystems/nfsroot.txt>.
-
-          Most people say N here.
-
-config NFSD
-        tristate "NFS server support"
-        depends on INET
-        select LOCKD
-        select SUNRPC
-        select EXPORTFS
-        select NFS_ACL_SUPPORT if NFSD_V2_ACL
-        help
-          Choose Y here if you want to allow other computers to access
-          files residing on this system using Sun's Network File System
-          protocol.  To compile the NFS server support as a module,
-          choose M here: the module will be called nfsd.
-
-          You may choose to use a user-space NFS server instead, in which
-          case you can choose N here.
-
-          To export local file systems using NFS, you also need to install
-          user space programs which can be found in the Linux nfs-utils
-          package, available from http://linux-nfs.org/.  More detail about
-          the Linux NFS server implementation is available via the
-          exports(5) man page.
-
-          Below you can choose which versions of the NFS protocol are
-          available to clients mounting the NFS server on this system.
-          Support for NFS version 2 (RFC 1094) is always available when
-          CONFIG_NFSD is selected.
-
-          If unsure, say N.
-
-config NFSD_V2_ACL
-        bool
-        depends on NFSD
-
-config NFSD_V3
-        bool "NFS server support for NFS version 3"
-        depends on NFSD
-        help
-          This option enables support in your system's NFS server for
-          version 3 of the NFS protocol (RFC 1813).
-
-          If unsure, say Y.
-
-config NFSD_V3_ACL
-        bool "NFS server support for the NFSv3 ACL protocol extension"
-        depends on NFSD_V3
-        select NFSD_V2_ACL
-        help
-          Solaris NFS servers support an auxiliary NFSv3 ACL protocol that
-          never became an official part of the NFS version 3 protocol.
-          This protocol extension allows applications on NFS clients to
-          manipulate POSIX Access Control Lists on files residing on NFS
-          servers.  NFS servers enforce POSIX ACLs on local files whether
-          this protocol is available or not.
-
-          This option enables support in your system's NFS server for the
-          NFSv3 ACL protocol extension allowing NFS clients to manipulate
-          POSIX ACLs on files exported by your system's NFS server.  NFS
-          clients which support the Solaris NFSv3 ACL protocol can then
-          access and modify ACLs on your NFS server.
-
-          To store ACLs on your NFS server, you also need to enable ACL-
-          related CONFIG options for your local file systems of choice.
-
-          If unsure, say N.
-
-config NFSD_V4
-        bool "NFS server support for NFS version 4 (EXPERIMENTAL)"
-        depends on NFSD && PROC_FS && EXPERIMENTAL
-        select NFSD_V3
-        select FS_POSIX_ACL
-        select RPCSEC_GSS_KRB5
-        help
-          This option enables support in your system's NFS server for
-          version 4 of the NFS protocol (RFC 3530).
-
-          To export files using NFSv4, you need to install additional user
-          space programs which can be found in the Linux nfs-utils package,
-          available from http://linux-nfs.org/.
-
-          If unsure, say N.
+source "fs/nfs/Kconfig"
+source "fs/nfsd/Kconfig"
 
 config LOCKD
         tristate
@@ -1381,221 +264,13 @@ config NFS_COMMON
         depends on NFSD || NFS_FS
         default y
 
-config SUNRPC
-        tristate
-
-config SUNRPC_GSS
-        tristate
-
-config SUNRPC_XPRT_RDMA
-        tristate
-        depends on SUNRPC && INFINIBAND && EXPERIMENTAL
-        default SUNRPC && INFINIBAND
-        help
-          This option enables an RPC client transport capability that
-          allows the NFS client to mount servers via an RDMA-enabled
-          transport.
-
-          To compile RPC client RDMA transport support as a module,
-          choose M here: the module will be called xprtrdma.
-
-          If unsure, say N.
-
-config SUNRPC_REGISTER_V4
-        bool "Register local RPC services via rpcbind v4 (EXPERIMENTAL)"
-        depends on SUNRPC && EXPERIMENTAL
-        default n
-        help
-          Sun added support for registering RPC services at an IPv6
-          address by creating two new versions of the rpcbind protocol
-          (RFC 1833).
-
-          This option enables support in the kernel RPC server for
-          registering kernel RPC services via version 4 of the rpcbind
-          protocol.  If you enable this option, you must run a portmapper
-          daemon that supports rpcbind protocol version 4.
-
-          Serving NFS over IPv6 from knfsd (the kernel's NFS server)
-          requires that you enable this option and use a portmapper that
-          supports rpcbind version 4.
-
-          If unsure, say N to get traditional behavior (register kernel
-          RPC services using only rpcbind version 2).  Distributions
-          using the legacy Linux portmapper daemon must say N here.
-
-config RPCSEC_GSS_KRB5
-        tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
-        depends on SUNRPC && EXPERIMENTAL
-        select SUNRPC_GSS
-        select CRYPTO
-        select CRYPTO_MD5
-        select CRYPTO_DES
-        select CRYPTO_CBC
-        help
-          Choose Y here to enable Secure RPC using the Kerberos version 5
-          GSS-API mechanism (RFC 1964).
-
-          Secure RPC calls with Kerberos require an auxiliary user-space
-          daemon which may be found in the Linux nfs-utils package
-          available from http://linux-nfs.org/.  In addition, user-space
-          Kerberos support should be installed.
-
-          If unsure, say N.
-
-config RPCSEC_GSS_SPKM3
-        tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)"
-        depends on SUNRPC && EXPERIMENTAL
-        select SUNRPC_GSS
-        select CRYPTO
-        select CRYPTO_MD5
-        select CRYPTO_DES
-        select CRYPTO_CAST5
-        select CRYPTO_CBC
-        help
-          Choose Y here to enable Secure RPC using the SPKM3 public key
-          GSS-API mechansim (RFC 2025).
-
-          Secure RPC calls with SPKM3 require an auxiliary userspace
-          daemon which may be found in the Linux nfs-utils package
-          available from http://linux-nfs.org/.
-
-          If unsure, say N.
-
-config SMB_FS
-        tristate "SMB file system support (OBSOLETE, please use CIFS)"
-        depends on INET
-        select NLS
-        help
-          SMB (Server Message Block) is the protocol Windows for Workgroups
-          (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
-          files and printers over local networks.  Saying Y here allows you to
-          mount their file systems (often called "shares" in this context) and
-          access them just like any other Unix directory.  Currently, this
-          works only if the Windows machines use TCP/IP as the underlying
-          transport protocol, and not NetBEUI.  For details, read
-          <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
-          available from <http://www.tldp.org/docs.html#howto>.
-
-          Note: if you just want your box to act as an SMB *server* and make
-          files and printing services available to Windows clients (which need
-          to have a TCP/IP stack), you don't need to say Y here; you can use
-          the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
-          for that.
-
-          General information about how to connect Linux, Windows machines and
-          Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
-          To compile the SMB support as a module, choose M here:
-          the module will be called smbfs.  Most people say N, however.
-
-config SMB_NLS_DEFAULT
-        bool "Use a default NLS"
-        depends on SMB_FS
-        help
-          Enabling this will make smbfs use nls translations by default. You
-          need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
-          settings and you need to give the default nls for the SMB server as
-          CONFIG_SMB_NLS_REMOTE.
-
-          The nls settings can be changed at mount time, if your smbmount
-          supports that, using the codepage and iocharset parameters.
-
-          smbmount from samba 2.2.0 or later supports this.
-
-config SMB_NLS_REMOTE
-        string "Default Remote NLS Option"
-        depends on SMB_NLS_DEFAULT
-        default "cp437"
-        help
-          This setting allows you to specify a default value for which
-          codepage the server uses. If this field is left blank no
-          translations will be done by default. The local codepage/charset
-          default to CONFIG_NLS_DEFAULT.
-
-          The nls settings can be changed at mount time, if your smbmount
-          supports that, using the codepage and iocharset parameters.
-
-          smbmount from samba 2.2.0 or later supports this.
-
+source "net/sunrpc/Kconfig"
+source "fs/smbfs/Kconfig"
 source "fs/cifs/Kconfig"
-
-config NCP_FS
-        tristate "NCP file system support (to mount NetWare volumes)"
-        depends on IPX!=n || INET
-        help
-          NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
-          used by Novell NetWare clients to talk to file servers.  It is to
-          IPX what NFS is to TCP/IP, if that helps.  Saying Y here allows you
-          to mount NetWare file server volumes and to access them just like
-          any other Unix directory.  For details, please read the file
-          <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
-          the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
-
-          You do not have to say Y here if you want your Linux box to act as a
-          file *server* for Novell NetWare clients.
-
-          General information about how to connect Linux, Windows machines and
-          Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
-          To compile this as a module, choose M here: the module will be called
-          ncpfs.  Say N unless you are connected to a Novell network.
-
 source "fs/ncpfs/Kconfig"
-
-config CODA_FS
-        tristate "Coda file system support (advanced network fs)"
-        depends on INET
-        help
-          Coda is an advanced network file system, similar to NFS in that it
-          enables you to mount file systems of a remote server and access them
-          with regular Unix commands as if they were sitting on your hard
-          disk.  Coda has several advantages over NFS: support for
-          disconnected operation (e.g. for laptops), read/write server
-          replication, security model for authentication and encryption,
-          persistent client caches and write back caching.
-
-          If you say Y here, your Linux box will be able to act as a Coda
-          *client*.  You will need user level code as well, both for the
-          client and server.  Servers are currently user level, i.e. they need
-          no kernel support.  Please read
-          <file:Documentation/filesystems/coda.txt> and check out the Coda
-          home page <http://www.coda.cs.cmu.edu/>.
-
-          To compile the coda client support as a module, choose M here: the
-          module will be called coda.
-
-config AFS_FS
-        tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
-        depends on INET && EXPERIMENTAL
-        select AF_RXRPC
-        help
-          If you say Y here, you will get an experimental Andrew File System
-          driver. It currently only supports unsecured read-only AFS access.
-
-          See <file:Documentation/filesystems/afs.txt> for more information.
-
-          If unsure, say N.
-
-config AFS_DEBUG
-        bool "AFS dynamic debugging"
-        depends on AFS_FS
-        help
-          Say Y here to make runtime controllable debugging messages appear.
-
-          See <file:Documentation/filesystems/afs.txt> for more information.
-
-          If unsure, say N.
-
-config 9P_FS
-        tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)"
-        depends on INET && NET_9P && EXPERIMENTAL
-        help
-          If you say Y here, you will get experimental support for
-          Plan 9 resource sharing via the 9P2000 protocol.
-
-          See <http://v9fs.sf.net> for more information.
-
-          If unsure, say N.
+source "fs/coda/Kconfig"
+source "fs/afs/Kconfig"
+source "fs/9p/Kconfig"
 
 endif # NETWORK_FILESYSTEMS
 
diff --git a/fs/adfs/Kconfig b/fs/adfs/Kconfig
new file mode 100644
index 000000000000..e55182a74605
--- /dev/null
+++ b/fs/adfs/Kconfig
@@ -0,0 +1,27 @@
+config ADFS_FS
+        tristate "ADFS file system support (EXPERIMENTAL)"
+        depends on BLOCK && EXPERIMENTAL
+        help
+          The Acorn Disc Filing System is the standard file system of the
+          RiscOS operating system which runs on Acorn's ARM-based Risc PC
+          systems and the Acorn Archimedes range of machines. If you say Y
+          here, Linux will be able to read from ADFS partitions on hard drives
+          and from ADFS-formatted floppy discs. If you also want to be able to
+          write to those devices, say Y to "ADFS write support" below.
+
+          The ADFS partition should be the first partition (i.e.,
+          /dev/[hs]d?1) on each of your drives. Please read the file
+          <file:Documentation/filesystems/adfs.txt> for further details.
+
+          To compile this code as a module, choose M here: the module will be
+          called adfs.
+
+          If unsure, say N.
+
+config ADFS_FS_RW
+        bool "ADFS write support (DANGEROUS)"
+        depends on ADFS_FS
+        help
+          If you say Y here, you will be able to write to ADFS partitions on
+          hard drives and ADFS-formatted floppy disks. This is experimental
+          codes, so if you're unsure, say N.
diff --git a/fs/affs/Kconfig b/fs/affs/Kconfig
new file mode 100644
index 000000000000..cfad9afb4762
--- /dev/null
+++ b/fs/affs/Kconfig
@@ -0,0 +1,21 @@
+config AFFS_FS
+        tristate "Amiga FFS file system support (EXPERIMENTAL)"
+        depends on BLOCK && EXPERIMENTAL
+        help
+          The Fast File System (FFS) is the common file system used on hard
+          disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20).  Say Y
+          if you want to be able to read and write files from and to an Amiga
+          FFS partition on your hard drive.  Amiga floppies however cannot be
+          read with this driver due to an incompatibility of the floppy
+          controller used in an Amiga and the standard floppy controller in
+          PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
+          and <file:fs/affs/Changes>.
+
+          With this driver you can also mount disk files used by Bernd
+          Schmidt's Un*X Amiga Emulator
+          (<http://www.freiburg.linux.de/~uae/>).
+          If you want to do this, you will also need to say Y or M to "Loop
+          device support", above.
+
+          To compile this file system support as a module, choose M here: the
+          module will be called affs.  If unsure, say N.
diff --git a/fs/afs/Kconfig b/fs/afs/Kconfig
new file mode 100644
index 000000000000..e7b522fe15e1
--- /dev/null
+++ b/fs/afs/Kconfig
@@ -0,0 +1,21 @@
+config AFS_FS
+        tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
+        depends on INET && EXPERIMENTAL
+        select AF_RXRPC
+        help
+          If you say Y here, you will get an experimental Andrew File System
+          driver. It currently only supports unsecured read-only AFS access.
+
+          See <file:Documentation/filesystems/afs.txt> for more information.
+
+          If unsure, say N.
+
+config AFS_DEBUG
+        bool "AFS dynamic debugging"
+        depends on AFS_FS
+        help
+          Say Y here to make runtime controllable debugging messages appear.
+
+          See <file:Documentation/filesystems/afs.txt> for more information.
+
+          If unsure, say N.
diff --git a/fs/autofs/Kconfig b/fs/autofs/Kconfig
new file mode 100644
index 000000000000..5f3bea90911e
--- /dev/null
+++ b/fs/autofs/Kconfig
@@ -0,0 +1,21 @@
+config AUTOFS_FS
+        tristate "Kernel automounter support"
+        help
+          The automounter is a tool to automatically mount remote file systems
+          on demand. This implementation is partially kernel-based to reduce
+          overhead in the already-mounted case; this is unlike the BSD
+          automounter (amd), which is a pure user space daemon.
+
+          To use the automounter you need the user-space tools from the autofs
+          package; you can find the location in <file:Documentation/Changes>.
+          You also want to answer Y to "NFS file system support", below.
+
+          If you want to use the newer version of the automounter with more
+          features, say N here and say Y to "Kernel automounter v4 support",
+          below.
+
+          To compile this support as a module, choose M here: the module will be
+          called autofs.
+
+          If you are not a part of a fairly large, distributed network, you
+          probably do not need an automounter, and can say N here.
diff --git a/fs/autofs4/Kconfig b/fs/autofs4/Kconfig
new file mode 100644
index 000000000000..1204d6384d39
--- /dev/null
+++ b/fs/autofs4/Kconfig
@@ -0,0 +1,20 @@
+config AUTOFS4_FS
+        tristate "Kernel automounter version 4 support (also supports v3)"
+        help
+          The automounter is a tool to automatically mount remote file systems
+          on demand. This implementation is partially kernel-based to reduce
+          overhead in the already-mounted case; this is unlike the BSD
+          automounter (amd), which is a pure user space daemon.
+
+          To use the automounter you need the user-space tools from
+          <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also
+          want to answer Y to "NFS file system support", below.
+
+          To compile this support as a module, choose M here: the module will be
+          called autofs4.  You will need to add "alias autofs autofs4" to your
+          modules configuration file.
+
+          If you are not a part of a fairly large, distributed network or
+          don't have a laptop which needs to dynamically reconfigure to the
+          local network, you probably do not need an automounter, and can say
+          N here.
diff --git a/fs/befs/Kconfig b/fs/befs/Kconfig
new file mode 100644
index 000000000000..7835d30f211f
--- /dev/null
+++ b/fs/befs/Kconfig
@@ -0,0 +1,26 @@
+config BEFS_FS
+        tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)"
+        depends on BLOCK && EXPERIMENTAL
+        select NLS
+        help
+          The BeOS File System (BeFS) is the native file system of Be, Inc's
+          BeOS. Notable features include support for arbitrary attributes
+          on files and directories, and database-like indices on selected
+          attributes. (Also note that this driver doesn't make those features
+          available at this time). It is a 64 bit filesystem, so it supports
+          extremely large volumes and files.
+
+          If you use this filesystem, you should also say Y to at least one
+          of the NLS (native language support) options below.
+
+          If you don't know what this is about, say N.
+
+          To compile this as a module, choose M here: the module will be
+          called befs.
+
+config BEFS_DEBUG
+        bool "Debug BeFS"
+        depends on BEFS_FS
+        help
+          If you say Y here, you can use the 'debug' mount option to enable
+          debugging output from the driver.
diff --git a/fs/bfs/Kconfig b/fs/bfs/Kconfig
new file mode 100644
index 000000000000..c2336c62024f
--- /dev/null
+++ b/fs/bfs/Kconfig
@@ -0,0 +1,19 @@
+config BFS_FS
+        tristate "BFS file system support (EXPERIMENTAL)"
+        depends on BLOCK && EXPERIMENTAL
+        help
+          Boot File System (BFS) is a file system used under SCO UnixWare to
+          allow the bootloader access to the kernel image and other important
+          files during the boot process.  It is usually mounted under /stand
+          and corresponds to the slice marked as "STAND" in the UnixWare
+          partition.  You should say Y if you want to read or write the files
+          on your /stand slice from within Linux.  You then also need to say Y
+          to "UnixWare slices support", below.  More information about the BFS
+          file system is contained in the file
+          <file:Documentation/filesystems/bfs.txt>.
+
+          If you don't know what this is about, say N.
+
+          To compile this as a module, choose M here: the module will be called
+          bfs.  Note that the file system of your root partition (the one
+          containing the directory /) cannot be compiled as a module.
diff --git a/fs/btrfs/Kconfig b/fs/btrfs/Kconfig
new file mode 100644
index 000000000000..f8fcf999ea1b
--- /dev/null
+++ b/fs/btrfs/Kconfig
@@ -0,0 +1,18 @@
+config BTRFS_FS
+        tristate "Btrfs filesystem (EXPERIMENTAL) Unstable disk format"
+        depends on EXPERIMENTAL
+        select LIBCRC32C
+        select ZLIB_INFLATE
+        select ZLIB_DEFLATE
+        help
+          Btrfs is a new filesystem with extents, writable snapshotting,
+          support for multiple devices and many more features.
+
+          Btrfs is highly experimental, and THE DISK FORMAT IS NOT YET
+          FINALIZED.  You should say N here unless you are interested in
+          testing Btrfs with non-critical data.
+
+          To compile this file system support as a module, choose M here. The
+          module will be called btrfs.
+
+          If unsure, say N.
diff --git a/fs/coda/Kconfig b/fs/coda/Kconfig
new file mode 100644
index 000000000000..c0e5a7fad06d
--- /dev/null
+++ b/fs/coda/Kconfig
@@ -0,0 +1,21 @@
+config CODA_FS
+        tristate "Coda file system support (advanced network fs)"
+        depends on INET
+        help
+          Coda is an advanced network file system, similar to NFS in that it
+          enables you to mount file systems of a remote server and access them
+          with regular Unix commands as if they were sitting on your hard
+          disk.  Coda has several advantages over NFS: support for
+          disconnected operation (e.g. for laptops), read/write server
+          replication, security model for authentication and encryption,
+          persistent client caches and write back caching.
+
+          If you say Y here, your Linux box will be able to act as a Coda
+          *client*.  You will need user level code as well, both for the
+          client and server.  Servers are currently user level, i.e. they need
+          no kernel support.  Please read
+          <file:Documentation/filesystems/coda.txt> and check out the Coda
+          home page <http://www.coda.cs.cmu.edu/>.
+
+          To compile the coda client support as a module, choose M here: the
+          module will be called coda.
diff --git a/fs/configfs/Kconfig b/fs/configfs/Kconfig
new file mode 100644
index 000000000000..13587cc97a0b
--- /dev/null
+++ b/fs/configfs/Kconfig
@@ -0,0 +1,11 @@
+config CONFIGFS_FS
+        tristate "Userspace-driven configuration filesystem"
+        depends on SYSFS
+        help
+          configfs is a ram-based filesystem that provides the converse
+          of sysfs's functionality. Where sysfs is a filesystem-based
+          view of kernel objects, configfs is a filesystem-based manager
+          of kernel objects, or config_items.
+
+          Both sysfs and configfs can and should exist together on the
+          same system. One is not a replacement for the other.
diff --git a/fs/cramfs/Kconfig b/fs/cramfs/Kconfig
new file mode 100644
index 000000000000..cd06466f365e
--- /dev/null
+++ b/fs/cramfs/Kconfig
@@ -0,0 +1,19 @@
+config CRAMFS
+        tristate "Compressed ROM file system support (cramfs)"
+        depends on BLOCK
+        select ZLIB_INFLATE
+        help
+          Saying Y here includes support for CramFs (Compressed ROM File
+          System).  CramFs is designed to be a simple, small, and compressed
+          file system for ROM based embedded systems.  CramFs is read-only,
+          limited to 256MB file systems (with 16MB files), and doesn't support
+          16/32 bits uid/gid, hard links and timestamps.
+
+          See <file:Documentation/filesystems/cramfs.txt> and
+          <file:fs/cramfs/README> for further information.
+
+          To compile this as a module, choose M here: the module will be called
+          cramfs.  Note that the root file system (the one containing the
+          directory /) cannot be compiled as a module.
+
+          If unsure, say N.
diff --git a/fs/dlm/plock.c b/fs/dlm/plock.c
index eba87ff3177b..894a32d438d5 100644
--- a/fs/dlm/plock.c
+++ b/fs/dlm/plock.c
@@ -168,7 +168,7 @@ static int dlm_plock_callback(struct plock_op *op)
         notify = xop->callback;
 
         if (op->info.rv) {
-                notify(flc, NULL, op->info.rv);
+                notify(fl, NULL, op->info.rv);
                 goto out;
         }
 
@@ -187,7 +187,7 @@ static int dlm_plock_callback(struct plock_op *op)
                           (unsigned long long)op->info.number, file, fl);
         }
 
-        rv = notify(flc, NULL, 0);
+        rv = notify(fl, NULL, 0);
         if (rv) {
                 /* XXX: We need to cancel the fs lock here: */
                 log_print("dlm_plock_callback: lock granted after lock request "
@@ -304,7 +304,9 @@ int dlm_posix_get(dlm_lockspace_t *lockspace, u64 number, struct file *file,
         if (rv == -ENOENT)
                 rv = 0;
         else if (rv > 0) {
+                locks_init_lock(fl);
                 fl->fl_type = (op->info.ex) ? F_WRLCK : F_RDLCK;
+                fl->fl_flags = FL_POSIX;
                 fl->fl_pid = op->info.pid;
                 fl->fl_start = op->info.start;
                 fl->fl_end = op->info.end;
diff --git a/fs/dquot.c b/fs/dquot.c
index 48c0571f831d..bca3cac4bee7 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -87,14 +87,17 @@
 #define __DQUOT_PARANOIA
 
 /*
- * There are two quota SMP locks. dq_list_lock protects all lists with quotas
- * and quota formats and also dqstats structure containing statistics about the
- * lists. dq_data_lock protects data from dq_dqb and also mem_dqinfo structures
- * and also guards consistency of dquot->dq_dqb with inode->i_blocks, i_bytes.
+ * There are three quota SMP locks. dq_list_lock protects all lists with quotas
+ * and quota formats, dqstats structure containing statistics about the lists
+ * dq_data_lock protects data from dq_dqb and also mem_dqinfo structures and
+ * also guards consistency of dquot->dq_dqb with inode->i_blocks, i_bytes.
  * i_blocks and i_bytes updates itself are guarded by i_lock acquired directly
- * in inode_add_bytes() and inode_sub_bytes().
+ * in inode_add_bytes() and inode_sub_bytes(). dq_state_lock protects
+ * modifications of quota state (on quotaon and quotaoff) and readers who care
+ * about latest values take it as well.
  *
- * The spinlock ordering is hence: dq_data_lock > dq_list_lock > i_lock
+ * The spinlock ordering is hence: dq_data_lock > dq_list_lock > i_lock,
+ *   dq_list_lock > dq_state_lock
  *
  * Note that some things (eg. sb pointer, type, id) doesn't change during
  * the life of the dquot structure and so needn't to be protected by a lock
@@ -103,12 +106,7 @@
  * operation is just reading pointers from inode (or not using them at all) the
  * read lock is enough. If pointers are altered function must hold write lock
  * (these locking rules also apply for S_NOQUOTA flag in the inode - note that
- * for altering the flag i_mutex is also needed).  If operation is holding
- * reference to dquot in other way (e.g. quotactl ops) it must be guarded by
- * dqonoff_mutex.
- * This locking assures that:
- *   a) update/access to dquot pointers in inode is serialized
- *   b) everyone is guarded against invalidate_dquots()
+ * for altering the flag i_mutex is also needed).
  *
  * Each dquot has its dq_lock mutex. Locked dquots might not be referenced
  * from inodes (dquot_alloc_space() and such don't check the dq_lock).
@@ -122,10 +120,17 @@
  * Lock ordering (including related VFS locks) is the following:
  *   i_mutex > dqonoff_sem > journal_lock > dqptr_sem > dquot->dq_lock >
  *   dqio_mutex
+ * The lock ordering of dqptr_sem imposed by quota code is only dqonoff_sem >
+ * dqptr_sem. But filesystem has to count with the fact that functions such as
+ * dquot_alloc_space() acquire dqptr_sem and they usually have to be called
+ * from inside a transaction to keep filesystem consistency after a crash. Also
+ * filesystems usually want to do some IO on dquot from ->mark_dirty which is
+ * called with dqptr_sem held.
  * i_mutex on quota files is special (it's below dqio_mutex)
  */
 
 static DEFINE_SPINLOCK(dq_list_lock);
+static DEFINE_SPINLOCK(dq_state_lock);
 DEFINE_SPINLOCK(dq_data_lock);
 
 static char *quotatypes[] = INITQFNAMES;
@@ -428,7 +433,7 @@ static inline void do_destroy_dquot(struct dquot *dquot)
  * quota is disabled and pointers from inodes removed so there cannot be new
  * quota users. There can still be some users of quotas due to inodes being
  * just deleted or pruned by prune_icache() (those are not attached to any
- * list). We have to wait for such users.
+ * list) or parallel quotactl call. We have to wait for such users.
  */
 static void invalidate_dquots(struct super_block *sb, int type)
 {
@@ -600,7 +605,6 @@ static struct shrinker dqcache_shrinker = {
 /*
  * Put reference to dquot
  * NOTE: If you change this function please check whether dqput_blocks() works right...
- * MUST be called with either dqptr_sem or dqonoff_mutex held
  */
 void dqput(struct dquot *dquot)
 {
@@ -697,36 +701,30 @@ static struct dquot *get_empty_dquot(struct super_block *sb, int type)
 }
 
 /*
- * Check whether dquot is in memory.
- * MUST be called with either dqptr_sem or dqonoff_mutex held
- */
-int dquot_is_cached(struct super_block *sb, unsigned int id, int type)
-{
-        unsigned int hashent = hashfn(sb, id, type);
-        int ret = 0;
-
-        if (!sb_has_quota_active(sb, type))
-                return 0;
-        spin_lock(&dq_list_lock);
-        if (find_dquot(hashent, sb, id, type) != NODQUOT)
-                ret = 1;
-        spin_unlock(&dq_list_lock);
-        return ret;
-}
-
-/*
  * Get reference to dquot
- * MUST be called with either dqptr_sem or dqonoff_mutex held
+ *
+ * Locking is slightly tricky here. We are guarded from parallel quotaoff()
+ * destroying our dquot by:
+ *   a) checking for quota flags under dq_list_lock and
+ *   b) getting a reference to dquot before we release dq_list_lock
  */
 struct dquot *dqget(struct super_block *sb, unsigned int id, int type)
 {
         unsigned int hashent = hashfn(sb, id, type);
-        struct dquot *dquot, *empty = NODQUOT;
+        struct dquot *dquot = NODQUOT, *empty = NODQUOT;
 
         if (!sb_has_quota_active(sb, type))
                 return NODQUOT;
 we_slept:
         spin_lock(&dq_list_lock);
+        spin_lock(&dq_state_lock);
+        if (!sb_has_quota_active(sb, type)) {
+                spin_unlock(&dq_state_lock);
+                spin_unlock(&dq_list_lock);
+                goto out;
+        }
+        spin_unlock(&dq_state_lock);
+
         if ((dquot = find_dquot(hashent, sb, id, type)) == NODQUOT) {
                 if (empty == NODQUOT) {
                         spin_unlock(&dq_list_lock);
@@ -735,6 +733,7 @@ we_slept:
                         goto we_slept;
                 }
                 dquot = empty;
+                empty = NODQUOT;
                 dquot->dq_id = id;
                 /* all dquots go on the inuse_list */
                 put_inuse(dquot);
@@ -749,8 +748,6 @@ we_slept:
                 dqstats.cache_hits++;
                 dqstats.lookups++;
                 spin_unlock(&dq_list_lock);
-                if (empty)
-                        do_destroy_dquot(empty);
         }
         /* Wait for dq_lock - after this we know that either dquot_release() is already
          * finished or it will be canceled due to dq_count > 1 test */
@@ -758,11 +755,15 @@ we_slept:
         /* Read the dquot and instantiate it (everything done only if needed) */
         if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags) && sb->dq_op->acquire_dquot(dquot) < 0) {
                 dqput(dquot);
-                return NODQUOT;
+                dquot = NODQUOT;
+                goto out;
         }
 #ifdef __DQUOT_PARANOIA
         BUG_ON(!dquot->dq_sb);  /* Has somebody invalidated entry under us? */
 #endif
+out:
+        if (empty)
+                do_destroy_dquot(empty);
 
         return dquot;
 }
@@ -1198,63 +1199,76 @@ static int info_bdq_free(struct dquot *dquot, qsize_t space)
 }
 /*
  *      Initialize quota pointers in inode
- *      Transaction must be started at entry
+ *      We do things in a bit complicated way but by that we avoid calling
+ *      dqget() and thus filesystem callbacks under dqptr_sem.
  */
 int dquot_initialize(struct inode *inode, int type)
 {
         unsigned int id = 0;
         int cnt, ret = 0;
+        struct dquot *got[MAXQUOTAS] = { NODQUOT, NODQUOT };
+        struct super_block *sb = inode->i_sb;
 
         /* First test before acquiring mutex - solves deadlocks when we
          * re-enter the quota code and are already holding the mutex */
         if (IS_NOQUOTA(inode))
                 return 0;
-        down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+
+        /* First get references to structures we might need. */
+        for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
+                if (type != -1 && cnt != type)
+                        continue;
+                switch (cnt) {
+                case USRQUOTA:
+                        id = inode->i_uid;
+                        break;
+                case GRPQUOTA:
+                        id = inode->i_gid;
+                        break;
+                }
+                got[cnt] = dqget(sb, id, cnt);
+        }
+
+        down_write(&sb_dqopt(sb)->dqptr_sem);
         /* Having dqptr_sem we know NOQUOTA flags can't be altered... */
         if (IS_NOQUOTA(inode))
                 goto out_err;
         for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
                 if (type != -1 && cnt != type)
                         continue;
+                /* Avoid races with quotaoff() */
+                if (!sb_has_quota_active(sb, cnt))
+                        continue;
                 if (inode->i_dquot[cnt] == NODQUOT) {
-                        switch (cnt) {
-                                case USRQUOTA:
-                                        id = inode->i_uid;
-                                        break;
-                                case GRPQUOTA:
-                                        id = inode->i_gid;
-                                        break;
-                        }
-                        inode->i_dquot[cnt] = dqget(inode->i_sb, id, cnt);
+                        inode->i_dquot[cnt] = got[cnt];
+                        got[cnt] = NODQUOT;
                 }
         }
 out_err:
-        up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+        up_write(&sb_dqopt(sb)->dqptr_sem);
+        /* Drop unused references */
+        for (cnt = 0; cnt < MAXQUOTAS; cnt++)
+                dqput(got[cnt]);
         return ret;
 }
 
 /*
  *      Release all quotas referenced by inode
- *      Transaction must be started at an entry
  */
-int dquot_drop_locked(struct inode *inode)
+int dquot_drop(struct inode *inode)
 {
         int cnt;
+        struct dquot *put[MAXQUOTAS];
 
+        down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
         for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-                if (inode->i_dquot[cnt] != NODQUOT) {
-                        dqput(inode->i_dquot[cnt]);
-                        inode->i_dquot[cnt] = NODQUOT;
-                }
+                put[cnt] = inode->i_dquot[cnt];
+                inode->i_dquot[cnt] = NODQUOT;
         }
-        return 0;
-}
-
-int dquot_drop(struct inode *inode)
-{
-        down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
-        dquot_drop_locked(inode);
         up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+
+        for (cnt = 0; cnt < MAXQUOTAS; cnt++)
+                dqput(put[cnt]);
         return 0;
 }
 
@@ -1470,8 +1484,9 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr)
         qsize_t space;
         struct dquot *transfer_from[MAXQUOTAS];
         struct dquot *transfer_to[MAXQUOTAS];
-        int cnt, ret = NO_QUOTA, chuid = (iattr->ia_valid & ATTR_UID) && inode->i_uid != iattr->ia_uid,
-            chgid = (iattr->ia_valid & ATTR_GID) && inode->i_gid != iattr->ia_gid;
+        int cnt, ret = QUOTA_OK;
+        int chuid = iattr->ia_valid & ATTR_UID && inode->i_uid != iattr->ia_uid,
+            chgid = iattr->ia_valid & ATTR_GID && inode->i_gid != iattr->ia_gid;
         char warntype_to[MAXQUOTAS];
         char warntype_from_inodes[MAXQUOTAS], warntype_from_space[MAXQUOTAS];
 
@@ -1479,21 +1494,11 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr)
          * re-enter the quota code and are already holding the mutex */
         if (IS_NOQUOTA(inode))
                 return QUOTA_OK;
-        /* Clear the arrays */
+        /* Initialize the arrays */
         for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-                transfer_to[cnt] = transfer_from[cnt] = NODQUOT;
+                transfer_from[cnt] = NODQUOT;
+                transfer_to[cnt] = NODQUOT;
                 warntype_to[cnt] = QUOTA_NL_NOWARN;
-        }
-        down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
-        /* Now recheck reliably when holding dqptr_sem */
-        if (IS_NOQUOTA(inode)) {        /* File without quota accounting? */
-                up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
-                return QUOTA_OK;
-        }
-        /* First build the transfer_to list - here we can block on
-         * reading/instantiating of dquots.  We know that the transaction for
-         * us was already started so we don't violate lock ranking here */
-        for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
                 switch (cnt) {
                         case USRQUOTA:
                                 if (!chuid)
@@ -1507,6 +1512,13 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr)
                                 break;
                 }
         }
+
+        down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+        /* Now recheck reliably when holding dqptr_sem */
+        if (IS_NOQUOTA(inode)) {        /* File without quota accounting? */
+                up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+                goto put_all;
+        }
         spin_lock(&dq_data_lock);
         space = inode_get_bytes(inode);
         /* Build the transfer_from list and check the limits */
@@ -1517,7 +1529,7 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr)
                 if (check_idq(transfer_to[cnt], 1, warntype_to + cnt) ==
                     NO_QUOTA || check_bdq(transfer_to[cnt], space, 0,
                     warntype_to + cnt) == NO_QUOTA)
-                        goto warn_put_all;
+                        goto over_quota;
         }
 
         /*
@@ -1545,28 +1557,37 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr)
 
                 inode->i_dquot[cnt] = transfer_to[cnt];
         }
-        ret = QUOTA_OK;
-warn_put_all:
         spin_unlock(&dq_data_lock);
+        up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+
         /* Dirtify all the dquots - this can block when journalling */
         for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
                 if (transfer_from[cnt])
                         mark_dquot_dirty(transfer_from[cnt]);
-                if (transfer_to[cnt])
+                if (transfer_to[cnt]) {
                         mark_dquot_dirty(transfer_to[cnt]);
+                        /* The reference we got is transferred to the inode */
+                        transfer_to[cnt] = NODQUOT;
+                }
         }
+warn_put_all:
         flush_warnings(transfer_to, warntype_to);
         flush_warnings(transfer_from, warntype_from_inodes);
         flush_warnings(transfer_from, warntype_from_space);
-        
+put_all:
         for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-                if (ret == QUOTA_OK && transfer_from[cnt] != NODQUOT)
-                        dqput(transfer_from[cnt]);
-                if (ret == NO_QUOTA && transfer_to[cnt] != NODQUOT)
-                        dqput(transfer_to[cnt]);
+                dqput(transfer_from[cnt]);
+                dqput(transfer_to[cnt]);
         }
-        up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
         return ret;
+over_quota:
+        spin_unlock(&dq_data_lock);
+        up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+        /* Clear dquot pointers we don't want to dqput() */
+        for (cnt = 0; cnt < MAXQUOTAS; cnt++)
+                transfer_from[cnt] = NODQUOT;
+        ret = NO_QUOTA;
+        goto warn_put_all;
 }
 
 /* Wrapper for transferring ownership of an inode */
@@ -1651,19 +1672,24 @@ int vfs_quota_disable(struct super_block *sb, int type, unsigned int flags)
                         continue;
 
                 if (flags & DQUOT_SUSPENDED) {
+                        spin_lock(&dq_state_lock);
                         dqopt->flags |=
                                 dquot_state_flag(DQUOT_SUSPENDED, cnt);
+                        spin_unlock(&dq_state_lock);
                 } else {
+                        spin_lock(&dq_state_lock);
                         dqopt->flags &= ~dquot_state_flag(flags, cnt);
                         /* Turning off suspended quotas? */
                         if (!sb_has_quota_loaded(sb, cnt) &&
                             sb_has_quota_suspended(sb, cnt)) {
                                 dqopt->flags &= ~dquot_state_flag(
                                                         DQUOT_SUSPENDED, cnt);
+                                spin_unlock(&dq_state_lock);
                                 iput(dqopt->files[cnt]);
                                 dqopt->files[cnt] = NULL;
                                 continue;
                         }
+                        spin_unlock(&dq_state_lock);
                 }
 
                 /* We still have to keep quota loaded? */
@@ -1830,7 +1856,9 @@ static int vfs_load_quota_inode(struct inode *inode, int type, int format_id,
         }
         mutex_unlock(&dqopt->dqio_mutex);
         mutex_unlock(&inode->i_mutex);
+        spin_lock(&dq_state_lock);
         dqopt->flags |= dquot_state_flag(flags, type);
+        spin_unlock(&dq_state_lock);
 
         add_dquot_ref(sb, type);
         mutex_unlock(&dqopt->dqonoff_mutex);
@@ -1872,9 +1900,11 @@ static int vfs_quota_on_remount(struct super_block *sb, int type)
         }
         inode = dqopt->files[type];
         dqopt->files[type] = NULL;
+        spin_lock(&dq_state_lock);
         flags = dqopt->flags & dquot_state_flag(DQUOT_USAGE_ENABLED |
                                                 DQUOT_LIMITS_ENABLED, type);
         dqopt->flags &= ~dquot_state_flag(DQUOT_STATE_FLAGS, type);
+        spin_unlock(&dq_state_lock);
         mutex_unlock(&dqopt->dqonoff_mutex);
 
         flags = dquot_generic_flag(flags, type);
@@ -1952,7 +1982,9 @@ int vfs_quota_enable(struct inode *inode, int type, int format_id,
                         ret = -EBUSY;
                         goto out_lock;
                 }
+                spin_lock(&dq_state_lock);
                 sb_dqopt(sb)->flags |= dquot_state_flag(flags, type);
+                spin_unlock(&dq_state_lock);
 out_lock:
                 mutex_unlock(&dqopt->dqonoff_mutex);
                 return ret;
@@ -2039,14 +2071,12 @@ int vfs_get_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *d
 {
         struct dquot *dquot;
 
-        mutex_lock(&sb_dqopt(sb)->dqonoff_mutex);
-        if (!(dquot = dqget(sb, id, type))) {
-                mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex);
+        dquot = dqget(sb, id, type);
+        if (dquot == NODQUOT)
                 return -ESRCH;
-        }
         do_get_dqblk(dquot, di);
         dqput(dquot);
-        mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex);
+
         return 0;
 }
 
@@ -2130,7 +2160,6 @@ int vfs_set_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *d
         struct dquot *dquot;
         int rc;
 
-        mutex_lock(&sb_dqopt(sb)->dqonoff_mutex);
         dquot = dqget(sb, id, type);
         if (!dquot) {
                 rc = -ESRCH;
@@ -2139,7 +2168,6 @@ int vfs_set_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *d
         rc = do_set_dqblk(dquot, di);
         dqput(dquot);
 out:
-        mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex);
         return rc;
 }
 
@@ -2370,11 +2398,9 @@ EXPORT_SYMBOL(dquot_release);
 EXPORT_SYMBOL(dquot_mark_dquot_dirty);
 EXPORT_SYMBOL(dquot_initialize);
 EXPORT_SYMBOL(dquot_drop);
-EXPORT_SYMBOL(dquot_drop_locked);
 EXPORT_SYMBOL(vfs_dq_drop);
 EXPORT_SYMBOL(dqget);
 EXPORT_SYMBOL(dqput);
-EXPORT_SYMBOL(dquot_is_cached);
 EXPORT_SYMBOL(dquot_alloc_space);
 EXPORT_SYMBOL(dquot_alloc_inode);
 EXPORT_SYMBOL(dquot_free_space);
diff --git a/fs/ecryptfs/Kconfig b/fs/ecryptfs/Kconfig
new file mode 100644
index 000000000000..0c754e64232b
--- /dev/null
+++ b/fs/ecryptfs/Kconfig
@@ -0,0 +1,11 @@
+config ECRYPT_FS
+        tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
+        depends on EXPERIMENTAL && KEYS && CRYPTO && NET
+        help
+          Encrypted filesystem that operates on the VFS layer.  See
+          <file:Documentation/filesystems/ecryptfs.txt> to learn more about
+          eCryptfs.  Userspace components are required and can be
+          obtained from <http://ecryptfs.sf.net>.
+
+          To compile this file system support as a module, choose M here: the
+          module will be called ecryptfs.
diff --git a/fs/efs/Kconfig b/fs/efs/Kconfig
new file mode 100644
index 000000000000..6ebfc1c207a8
--- /dev/null
+++ b/fs/efs/Kconfig
@@ -0,0 +1,14 @@
+config EFS_FS
+        tristate "EFS file system support (read only) (EXPERIMENTAL)"
+        depends on BLOCK && EXPERIMENTAL
+        help
+          EFS is an older file system used for non-ISO9660 CD-ROMs and hard
+          disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
+          uses the XFS file system for hard disk partitions however).
+
+          This implementation only offers read-only access. If you don't know
+          what all this is about, it's safe to say N. For more information
+          about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
+
+          To compile the EFS file system support as a module, choose M here: the
+          module will be called efs.
diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig
new file mode 100644
index 000000000000..d0a69ff25375
--- /dev/null
+++ b/fs/fat/Kconfig
@@ -0,0 +1,97 @@
+config FAT_FS
+        tristate
+        select NLS
+        help
+          If you want to use one of the FAT-based file systems (the MS-DOS and
+          VFAT (Windows 95) file systems), then you must say Y or M here
+          to include FAT support. You will then be able to mount partitions or
+          diskettes with FAT-based file systems and transparently access the
+          files on them, i.e. MSDOS files will look and behave just like all
+          other Unix files.
+
+          This FAT support is not a file system in itself, it only provides
+          the foundation for the other file systems. You will have to say Y or
+          M to at least one of "MSDOS fs support" or "VFAT fs support" in
+          order to make use of it.
+
+          Another way to read and write MSDOS floppies and hard drive
+          partitions from within Linux (but not transparently) is with the
+          mtools ("man mtools") program suite. You don't need to say Y here in
+          order to do that.
+
+          If you need to move large files on floppies between a DOS and a
+          Linux box, say Y here, mount the floppy under Linux with an MSDOS
+          file system and use GNU tar's M option. GNU tar is a program
+          available for Unix and DOS ("man tar" or "info tar").
+
+          The FAT support will enlarge your kernel by about 37 KB. If unsure,
+          say Y.
+
+          To compile this as a module, choose M here: the module will be called
+          fat.  Note that if you compile the FAT support as a module, you
+          cannot compile any of the FAT-based file systems into the kernel
+          -- they will have to be modules as well.
+
+config MSDOS_FS
+        tristate "MSDOS fs support"
+        select FAT_FS
+        help
+          This allows you to mount MSDOS partitions of your hard drive (unless
+          they are compressed; to access compressed MSDOS partitions under
+          Linux, you can either use the DOS emulator DOSEMU, described in the
+          DOSEMU-HOWTO, available from
+          <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
+          <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
+          intend to use dosemu with a non-compressed MSDOS partition, say Y
+          here) and MSDOS floppies. This means that file access becomes
+          transparent, i.e. the MSDOS files look and behave just like all
+          other Unix files.
+
+          If you have Windows 95 or Windows NT installed on your MSDOS
+          partitions, you should use the VFAT file system (say Y to "VFAT fs
+          support" below), or you will not be able to see the long filenames
+          generated by Windows 95 / Windows NT.
+
+          This option will enlarge your kernel by about 7 KB. If unsure,
+          answer Y. This will only work if you said Y to "DOS FAT fs support"
+          as well. To compile this as a module, choose M here: the module will
+          be called msdos.
+
+config VFAT_FS
+        tristate "VFAT (Windows-95) fs support"
+        select FAT_FS
+        help
+          This option provides support for normal Windows file systems with
+          long filenames.  That includes non-compressed FAT-based file systems
+          used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
+          programs from the mtools package.
+
+          The VFAT support enlarges your kernel by about 10 KB and it only
+          works if you said Y to the "DOS FAT fs support" above.  Please read
+          the file <file:Documentation/filesystems/vfat.txt> for details.  If
+          unsure, say Y.
+
+          To compile this as a module, choose M here: the module will be called
+          vfat.
+
+config FAT_DEFAULT_CODEPAGE
+        int "Default codepage for FAT"
+        depends on MSDOS_FS || VFAT_FS
+        default 437
+        help
+          This option should be set to the codepage of your FAT filesystems.
+          It can be overridden with the "codepage" mount option.
+          See <file:Documentation/filesystems/vfat.txt> for more information.
+
+config FAT_DEFAULT_IOCHARSET
+        string "Default iocharset for FAT"
+        depends on VFAT_FS
+        default "iso8859-1"
+        help
+          Set this to the default input/output character set you'd
+          like FAT to use. It should probably match the character set
+          that most of your FAT filesystems use, and can be overridden
+          with the "iocharset" mount option for FAT filesystems.
+          Note that "utf8" is not recommended for FAT filesystems.
+          If unsure, you shouldn't set "utf8" here.
+          See <file:Documentation/filesystems/vfat.txt> for more information.
diff --git a/fs/freevxfs/Kconfig b/fs/freevxfs/Kconfig
new file mode 100644
index 000000000000..8dc1cd5c1efe
--- /dev/null
+++ b/fs/freevxfs/Kconfig
@@ -0,0 +1,16 @@
+config VXFS_FS
+        tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
+        depends on BLOCK
+        help
+          FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
+          file system format.  VERITAS VxFS(TM) is the standard file system
+          of SCO UnixWare (and possibly others) and optionally available
+          for Sunsoft Solaris, HP-UX and many other operating systems.
+          Currently only readonly access is supported.
+
+          NOTE: the file system type as used by mount(1), mount(2) and
+          fstab(5) is 'vxfs' as it describes the file system format, not
+          the actual driver.
+
+          To compile this as a module, choose M here: the module will be
+          called freevxfs.  If unsure, say N.
diff --git a/fs/fuse/Kconfig b/fs/fuse/Kconfig
new file mode 100644
index 000000000000..0cf160a94eda
--- /dev/null
+++ b/fs/fuse/Kconfig
@@ -0,0 +1,15 @@
+config FUSE_FS
+        tristate "FUSE (Filesystem in Userspace) support"
+        help
+          With FUSE it is possible to implement a fully functional filesystem
+          in a userspace program.
+
+          There's also companion library: libfuse.  This library along with
+          utilities is available from the FUSE homepage:
+          <http://fuse.sourceforge.net/>
+
+          See <file:Documentation/filesystems/fuse.txt> for more information.
+          See <file:Documentation/Changes> for needed library/utility version.
+
+          If you want to develop a userspace FS, or if you want to use
+          a filesystem based on FUSE, answer Y or M.
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index e0c7ada08a1f..ba76b68c52ff 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -281,7 +281,8 @@ __releases(&fc->lock)
                         fc->blocked = 0;
                         wake_up_all(&fc->blocked_waitq);
                 }
-                if (fc->num_background == FUSE_CONGESTION_THRESHOLD) {
+                if (fc->num_background == FUSE_CONGESTION_THRESHOLD &&
+                    fc->connected) {
                         clear_bdi_congested(&fc->bdi, READ);
                         clear_bdi_congested(&fc->bdi, WRITE);
                 }
@@ -825,16 +826,21 @@ static int fuse_notify_poll(struct fuse_conn *fc, unsigned int size,
                             struct fuse_copy_state *cs)
 {
         struct fuse_notify_poll_wakeup_out outarg;
-        int err;
+        int err = -EINVAL;
 
         if (size != sizeof(outarg))
-                return -EINVAL;
+                goto err;
 
         err = fuse_copy_one(cs, &outarg, sizeof(outarg));
         if (err)
-                return err;
+                goto err;
 
+        fuse_copy_finish(cs);
         return fuse_notify_poll_wakeup(fc, &outarg);
+
+err:
+        fuse_copy_finish(cs);
+        return err;
 }
 
 static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code,
@@ -845,6 +851,7 @@ static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code,
                 return fuse_notify_poll(fc, size, cs);
 
         default:
+                fuse_copy_finish(cs);
                 return -EINVAL;
         }
 }
@@ -923,7 +930,6 @@ static ssize_t fuse_dev_write(struct kiocb *iocb, const struct iovec *iov,
          */
         if (!oh.unique) {
                 err = fuse_notify(fc, oh.error, nbytes - sizeof(oh), &cs);
-                fuse_copy_finish(&cs);
                 return err ? err : nbytes;
         }
 
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index e8162646a9b5..d9fdb7cec538 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -54,7 +54,7 @@ struct fuse_file *fuse_file_alloc(struct fuse_conn *fc)
                 ff->reserved_req = fuse_request_alloc();
                 if (!ff->reserved_req) {
                         kfree(ff);
-                        ff = NULL;
+                        return NULL;
                 } else {
                         INIT_LIST_HEAD(&ff->write_entry);
                         atomic_set(&ff->count, 0);
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 47c96fdca1ac..459b73dd45e1 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -292,6 +292,7 @@ static void fuse_put_super(struct super_block *sb)
         list_del(&fc->entry);
         fuse_ctl_remove_conn(fc);
         mutex_unlock(&fuse_mutex);
+        bdi_destroy(&fc->bdi);
         fuse_conn_put(fc);
 }
 
@@ -532,7 +533,6 @@ void fuse_conn_put(struct fuse_conn *fc)
                 if (fc->destroy_req)
                         fuse_request_free(fc->destroy_req);
                 mutex_destroy(&fc->inst_mutex);
-                bdi_destroy(&fc->bdi);
                 fc->release(fc);
         }
 }
@@ -805,16 +805,18 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
         int err;
         int is_bdev = sb->s_bdev != NULL;
 
+        err = -EINVAL;
         if (sb->s_flags & MS_MANDLOCK)
-                return -EINVAL;
+                goto err;
 
         if (!parse_fuse_opt((char *) data, &d, is_bdev))
-                return -EINVAL;
+                goto err;
 
         if (is_bdev) {
 #ifdef CONFIG_BLOCK
+                err = -EINVAL;
                 if (!sb_set_blocksize(sb, d.blksize))
-                        return -EINVAL;
+                        goto err;
 #endif
         } else {
                 sb->s_blocksize = PAGE_CACHE_SIZE;
@@ -826,20 +828,22 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
         sb->s_export_op = &fuse_export_operations;
 
         file = fget(d.fd);
+        err = -EINVAL;
         if (!file)
-                return -EINVAL;
+                goto err;
 
         if (file->f_op != &fuse_dev_operations)
-                return -EINVAL;
+                goto err_fput;
 
         fc = kmalloc(sizeof(*fc), GFP_KERNEL);
+        err = -ENOMEM;
         if (!fc)
-                return -ENOMEM;
+                goto err_fput;
 
         err = fuse_conn_init(fc, sb);
         if (err) {
                 kfree(fc);
-                return err;
+                goto err_fput;
         }
 
         fc->release = fuse_free_conn;
@@ -854,12 +858,12 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
         err = -ENOMEM;
         root = fuse_get_root_inode(sb, d.rootmode);
         if (!root)
-                goto err;
+                goto err_put_conn;
 
         root_dentry = d_alloc_root(root);
         if (!root_dentry) {
                 iput(root);
-                goto err;
+                goto err_put_conn;
         }
 
         init_req = fuse_request_alloc();
@@ -903,9 +907,11 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
         fuse_request_free(init_req);
  err_put_root:
         dput(root_dentry);
- err:
-        fput(file);
+ err_put_conn:
         fuse_conn_put(fc);
+ err_fput:
+        fput(file);
+ err:
         return err;
 }
 
diff --git a/fs/hfs/Kconfig b/fs/hfs/Kconfig
new file mode 100644
index 000000000000..b77c5bc20f8a
--- /dev/null
+++ b/fs/hfs/Kconfig
@@ -0,0 +1,12 @@
+config HFS_FS
+        tristate "Apple Macintosh file system support (EXPERIMENTAL)"
+        depends on BLOCK && EXPERIMENTAL
+        select NLS
+        help
+          If you say Y here, you will be able to mount Macintosh-formatted
+          floppy disks and hard drive partitions with full read-write access.
+          Please read <file:Documentation/filesystems/hfs.txt> to learn about
+          the available mount options.
+
+          To compile this file system support as a module, choose M here: the
+          module will be called hfs.
diff --git a/fs/hfsplus/Kconfig b/fs/hfsplus/Kconfig
new file mode 100644
index 000000000000..a63371815aab
--- /dev/null
+++ b/fs/hfsplus/Kconfig
@@ -0,0 +1,13 @@
+config HFSPLUS_FS
+        tristate "Apple Extended HFS file system support"
+        depends on BLOCK
+        select NLS
+        select NLS_UTF8
+        help
+          If you say Y here, you will be able to mount extended format
+          Macintosh-formatted hard drive partitions with full read-write access.
+
+          This file system is often called HFS+ and was introduced with
+          MacOS 8. It includes all Mac specific filesystem data such as
+          data forks and creator codes, but it also has several UNIX
+          style features such as file ownership and permissions.
diff --git a/fs/hpfs/Kconfig b/fs/hpfs/Kconfig
new file mode 100644
index 000000000000..56bd15c5bf6c
--- /dev/null
+++ b/fs/hpfs/Kconfig
@@ -0,0 +1,14 @@
+config HPFS_FS
+        tristate "OS/2 HPFS file system support"
+        depends on BLOCK
+        help
+          OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
+          is the file system used for organizing files on OS/2 hard disk
+          partitions. Say Y if you want to be able to read files from and
+          write files to an OS/2 HPFS partition on your hard drive. OS/2
+          floppies however are in regular MSDOS format, so you don't need this
+          option in order to be able to read them. Read
+          <file:Documentation/filesystems/hpfs.txt>.
+
+          To compile this file system support as a module, choose M here: the
+          module will be called hpfs.  If unsure, say N.
diff --git a/fs/isofs/Kconfig b/fs/isofs/Kconfig
new file mode 100644
index 000000000000..8ab9878e3671
--- /dev/null
+++ b/fs/isofs/Kconfig
@@ -0,0 +1,39 @@
+config ISO9660_FS
+        tristate "ISO 9660 CDROM file system support"
+        help
+          This is the standard file system used on CD-ROMs.  It was previously
+          known as "High Sierra File System" and is called "hsfs" on other
+          Unix systems.  The so-called Rock-Ridge extensions which allow for
+          long Unix filenames and symbolic links are also supported by this
+          driver.  If you have a CD-ROM drive and want to do more with it than
+          just listen to audio CDs and watch its LEDs, say Y (and read
+          <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
+          available from <http://www.tldp.org/docs.html#howto>), thereby
+          enlarging your kernel by about 27 KB; otherwise say N.
+
+          To compile this file system support as a module, choose M here: the
+          module will be called isofs.
+
+config JOLIET
+        bool "Microsoft Joliet CDROM extensions"
+        depends on ISO9660_FS
+        select NLS
+        help
+          Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
+          which allows for long filenames in unicode format (unicode is the
+          new 16 bit character code, successor to ASCII, which encodes the
+          characters of almost all languages of the world; see
+          <http://www.unicode.org/> for more information).  Say Y here if you
+          want to be able to read Joliet CD-ROMs under Linux.
+
+config ZISOFS
+        bool "Transparent decompression extension"
+        depends on ISO9660_FS
+        select ZLIB_INFLATE
+        help
+          This is a Linux-specific extension to RockRidge which lets you store
+          data in compressed form on a CD-ROM and have it transparently
+          decompressed when the CD-ROM is accessed.  See
+          <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
+          necessary to create such a filesystem.  Say Y here if you want to be
+          able to read such compressed CD-ROMs.
diff --git a/fs/jfs/Kconfig b/fs/jfs/Kconfig
new file mode 100644
index 000000000000..9ff619a6f9cc
--- /dev/null
+++ b/fs/jfs/Kconfig
@@ -0,0 +1,49 @@
+config JFS_FS
+        tristate "JFS filesystem support"
+        select NLS
+        help
+          This is a port of IBM's Journaled Filesystem .  More information is
+          available in the file <file:Documentation/filesystems/jfs.txt>.
+
+          If you do not intend to use the JFS filesystem, say N.
+
+config JFS_POSIX_ACL
+        bool "JFS POSIX Access Control Lists"
+        depends on JFS_FS
+        select FS_POSIX_ACL
+        help
+          Posix Access Control Lists (ACLs) support permissions for users and
+          groups beyond the owner/group/world scheme.
+
+          To learn more about Access Control Lists, visit the Posix ACLs for
+          Linux website <http://acl.bestbits.at/>.
+
+          If you don't know what Access Control Lists are, say N
+
+config JFS_SECURITY
+        bool "JFS Security Labels"
+        depends on JFS_FS
+        help
+          Security labels support alternative access control models
+          implemented by security modules like SELinux.  This option
+          enables an extended attribute handler for file security
+          labels in the jfs filesystem.
+
+          If you are not using a security module that requires using
+          extended attributes for file security labels, say N.
+
+config JFS_DEBUG
+        bool "JFS debugging"
+        depends on JFS_FS
+        help
+          If you are experiencing any problems with the JFS filesystem, say
+          Y here.  This will result in additional debugging messages to be
+          written to the system log.  Under normal circumstances, this
+          results in very little overhead.
+
+config JFS_STATISTICS
+        bool "JFS statistics"
+        depends on JFS_FS
+        help
+          Enabling this option will cause statistics from the JFS file system
+          to be made available to the user in the /proc/fs/jfs/ directory.
diff --git a/fs/minix/Kconfig b/fs/minix/Kconfig
new file mode 100644
index 000000000000..0fd7ca994264
--- /dev/null
+++ b/fs/minix/Kconfig
@@ -0,0 +1,17 @@
+config MINIX_FS
+        tristate "Minix file system support"
+        depends on BLOCK
+        help
+          Minix is a simple operating system used in many classes about OS's.
+          The minix file system (method to organize files on a hard disk
+          partition or a floppy disk) was the original file system for Linux,
+          but has been superseded by the second extended file system ext2fs.
+          You don't want to use the minix file system on your hard disk
+          because of certain built-in restrictions, but it is sometimes found
+          on older Linux floppy disks.  This option will enlarge your kernel
+          by about 28 KB. If unsure, say N.
+
+          To compile this file system support as a module, choose M here: the
+          module will be called minix.  Note that the file system of your root
+          partition (the one containing the directory /) cannot be compiled as
+          a module.
diff --git a/fs/ncpfs/Kconfig b/fs/ncpfs/Kconfig
index 142808427b25..c931cf22a1f6 100644
--- a/fs/ncpfs/Kconfig
+++ b/fs/ncpfs/Kconfig
@@ -1,6 +1,27 @@
 #
 # NCP Filesystem configuration
 #
+config NCP_FS
+        tristate "NCP file system support (to mount NetWare volumes)"
+        depends on IPX!=n || INET
+        help
+          NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
+          used by Novell NetWare clients to talk to file servers.  It is to
+          IPX what NFS is to TCP/IP, if that helps.  Saying Y here allows you
+          to mount NetWare file server volumes and to access them just like
+          any other Unix directory.  For details, please read the file
+          <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
+          the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
+
+          You do not have to say Y here if you want your Linux box to act as a
+          file *server* for Novell NetWare clients.
+
+          General information about how to connect Linux, Windows machines and
+          Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+          To compile this as a module, choose M here: the module will be called
+          ncpfs.  Say N unless you are connected to a Novell network.
+
 config NCPFS_PACKET_SIGNING
         bool "Packet signatures"
         depends on NCP_FS
diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig
new file mode 100644
index 000000000000..36fe20d6eba2
--- /dev/null
+++ b/fs/nfs/Kconfig
@@ -0,0 +1,86 @@
+config NFS_FS
+        tristate "NFS client support"
+        depends on INET
+        select LOCKD
+        select SUNRPC
+        select NFS_ACL_SUPPORT if NFS_V3_ACL
+        help
+          Choose Y here if you want to access files residing on other
+          computers using Sun's Network File System protocol.  To compile
+          this file system support as a module, choose M here: the module
+          will be called nfs.
+
+          To mount file systems exported by NFS servers, you also need to
+          install the user space mount.nfs command which can be found in
+          the Linux nfs-utils package, available from http://linux-nfs.org/.
+          Information about using the mount command is available in the
+          mount(8) man page.  More detail about the Linux NFS client
+          implementation is available via the nfs(5) man page.
+
+          Below you can choose which versions of the NFS protocol are
+          available in the kernel to mount NFS servers.  Support for NFS
+          version 2 (RFC 1094) is always available when NFS_FS is selected.
+
+          To configure a system which mounts its root file system via NFS
+          at boot time, say Y here, select "Kernel level IP
+          autoconfiguration" in the NETWORK menu, and select "Root file
+          system on NFS" below.  You cannot compile this file system as a
+          module in this case.
+
+          If unsure, say N.
+
+config NFS_V3
+        bool "NFS client support for NFS version 3"
+        depends on NFS_FS
+        help
+          This option enables support for version 3 of the NFS protocol
+          (RFC 1813) in the kernel's NFS client.
+
+          If unsure, say Y.
+
+config NFS_V3_ACL
+        bool "NFS client support for the NFSv3 ACL protocol extension"
+        depends on NFS_V3
+        help
+          Some NFS servers support an auxiliary NFSv3 ACL protocol that
+          Sun added to Solaris but never became an official part of the
+          NFS version 3 protocol.  This protocol extension allows
+          applications on NFS clients to manipulate POSIX Access Control
+          Lists on files residing on NFS servers.  NFS servers enforce
+          ACLs on local files whether this protocol is available or not.
+
+          Choose Y here if your NFS server supports the Solaris NFSv3 ACL
+          protocol extension and you want your NFS client to allow
+          applications to access and modify ACLs on files on the server.
+
+          Most NFS servers don't support the Solaris NFSv3 ACL protocol
+          extension.  You can choose N here or specify the "noacl" mount
+          option to prevent your NFS client from trying to use the NFSv3
+          ACL protocol.
+
+          If unsure, say N.
+
+config NFS_V4
+        bool "NFS client support for NFS version 4 (EXPERIMENTAL)"
+        depends on NFS_FS && EXPERIMENTAL
+        select RPCSEC_GSS_KRB5
+        help
+          This option enables support for version 4 of the NFS protocol
+          (RFC 3530) in the kernel's NFS client.
+
+          To mount NFS servers using NFSv4, you also need to install user
+          space programs which can be found in the Linux nfs-utils package,
+          available from http://linux-nfs.org/.
+
+          If unsure, say N.
+
+config ROOT_NFS
+        bool "Root file system on NFS"
+        depends on NFS_FS=y && IP_PNP
+        help
+          If you want your system to mount its root file system via NFS,
+          choose Y here.  This is common practice for managing systems
+          without local permanent storage.  For details, read
+          <file:Documentation/filesystems/nfsroot.txt>.
+
+          Most people say N here.
diff --git a/fs/nfsd/Kconfig b/fs/nfsd/Kconfig
new file mode 100644
index 000000000000..44d7d04dab95
--- /dev/null
+++ b/fs/nfsd/Kconfig
@@ -0,0 +1,80 @@
+config NFSD
+        tristate "NFS server support"
+        depends on INET
+        select LOCKD
+        select SUNRPC
+        select EXPORTFS
+        select NFS_ACL_SUPPORT if NFSD_V2_ACL
+        help
+          Choose Y here if you want to allow other computers to access
+          files residing on this system using Sun's Network File System
+          protocol.  To compile the NFS server support as a module,
+          choose M here: the module will be called nfsd.
+
+          You may choose to use a user-space NFS server instead, in which
+          case you can choose N here.
+
+          To export local file systems using NFS, you also need to install
+          user space programs which can be found in the Linux nfs-utils
+          package, available from http://linux-nfs.org/.  More detail about
+          the Linux NFS server implementation is available via the
+          exports(5) man page.
+
+          Below you can choose which versions of the NFS protocol are
+          available to clients mounting the NFS server on this system.
+          Support for NFS version 2 (RFC 1094) is always available when
+          CONFIG_NFSD is selected.
+
+          If unsure, say N.
+
+config NFSD_V2_ACL
+        bool
+        depends on NFSD
+
+config NFSD_V3
+        bool "NFS server support for NFS version 3"
+        depends on NFSD
+        help
+          This option enables support in your system's NFS server for
+          version 3 of the NFS protocol (RFC 1813).
+
+          If unsure, say Y.
+
+config NFSD_V3_ACL
+        bool "NFS server support for the NFSv3 ACL protocol extension"
+        depends on NFSD_V3
+        select NFSD_V2_ACL
+        help
+          Solaris NFS servers support an auxiliary NFSv3 ACL protocol that
+          never became an official part of the NFS version 3 protocol.
+          This protocol extension allows applications on NFS clients to
+          manipulate POSIX Access Control Lists on files residing on NFS
+          servers.  NFS servers enforce POSIX ACLs on local files whether
+          this protocol is available or not.
+
+          This option enables support in your system's NFS server for the
+          NFSv3 ACL protocol extension allowing NFS clients to manipulate
+          POSIX ACLs on files exported by your system's NFS server.  NFS
+          clients which support the Solaris NFSv3 ACL protocol can then
+          access and modify ACLs on your NFS server.
+
+          To store ACLs on your NFS server, you also need to enable ACL-
+          related CONFIG options for your local file systems of choice.
+
+          If unsure, say N.
+
+config NFSD_V4
+        bool "NFS server support for NFS version 4 (EXPERIMENTAL)"
+        depends on NFSD && PROC_FS && EXPERIMENTAL
+        select NFSD_V3
+        select FS_POSIX_ACL
+        select RPCSEC_GSS_KRB5
+        help
+          This option enables support in your system's NFS server for
+          version 4 of the NFS protocol (RFC 3530).
+
+          To export files using NFSv4, you need to install additional user
+          space programs which can be found in the Linux nfs-utils package,
+          available from http://linux-nfs.org/.
+
+          If unsure, say N.
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index d53a1838d6e8..bed766e435b5 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -427,10 +427,61 @@ static unsigned int inotify_poll(struct file *file, poll_table *wait)
         return ret;
 }
 
+/*
+ * Get an inotify_kernel_event if one exists and is small
+ * enough to fit in "count". Return an error pointer if
+ * not large enough.
+ *
+ * Called with the device ev_mutex held.
+ */
+static struct inotify_kernel_event *get_one_event(struct inotify_device *dev,
+                                                  size_t count)
+{
+        size_t event_size = sizeof(struct inotify_event);
+        struct inotify_kernel_event *kevent;
+
+        if (list_empty(&dev->events))
+                return NULL;
+
+        kevent = inotify_dev_get_event(dev);
+        if (kevent->name)
+                event_size += kevent->event.len;
+
+        if (event_size > count)
+                return ERR_PTR(-EINVAL);
+
+        remove_kevent(dev, kevent);
+        return kevent;
+}
+
+/*
+ * Copy an event to user space, returning how much we copied.
+ *
+ * We already checked that the event size is smaller than the
+ * buffer we had in "get_one_event()" above.
+ */
+static ssize_t copy_event_to_user(struct inotify_kernel_event *kevent,
+                                  char __user *buf)
+{
+        size_t event_size = sizeof(struct inotify_event);
+
+        if (copy_to_user(buf, &kevent->event, event_size))
+                return -EFAULT;
+
+        if (kevent->name) {
+                buf += event_size;
+
+                if (copy_to_user(buf, kevent->name, kevent->event.len))
+                        return -EFAULT;
+
+                event_size += kevent->event.len;
+        }
+        return event_size;
+}
+
 static ssize_t inotify_read(struct file *file, char __user *buf,
                             size_t count, loff_t *pos)
 {
-        size_t event_size = sizeof (struct inotify_event);
         struct inotify_device *dev;
         char __user *start;
         int ret;
@@ -440,81 +491,43 @@ static ssize_t inotify_read(struct file *file, char __user *buf,
         dev = file->private_data;
 
         while (1) {
+                struct inotify_kernel_event *kevent;
 
                 prepare_to_wait(&dev->wq, &wait, TASK_INTERRUPTIBLE);
 
                 mutex_lock(&dev->ev_mutex);
-                if (!list_empty(&dev->events)) {
-                        ret = 0;
-                        break;
-                }
+                kevent = get_one_event(dev, count);
                 mutex_unlock(&dev->ev_mutex);
 
-                if (file->f_flags & O_NONBLOCK) {
-                        ret = -EAGAIN;
-                        break;
-                }
-
-                if (signal_pending(current)) {
-                        ret = -EINTR;
-                        break;
+                if (kevent) {
+                        ret = PTR_ERR(kevent);
+                        if (IS_ERR(kevent))
+                                break;
+                        ret = copy_event_to_user(kevent, buf);
+                        free_kevent(kevent);
+                        if (ret < 0)
+                                break;
+                        buf += ret;
+                        count -= ret;
+                        continue;
                 }
 
-                schedule();
-        }
-
-        finish_wait(&dev->wq, &wait);
-        if (ret)
-                return ret;
-
-        while (1) {
-                struct inotify_kernel_event *kevent;
-
-                ret = buf - start;
-                if (list_empty(&dev->events))
+                ret = -EAGAIN;
+                if (file->f_flags & O_NONBLOCK)
                         break;
-
-                kevent = inotify_dev_get_event(dev);
-                if (event_size + kevent->event.len > count) {
-                        if (ret == 0 && count > 0) {
-                                /*
-                                 * could not get a single event because we
-                                 * didn't have enough buffer space.
-                                 */
-                                ret = -EINVAL;
-                        }
+                ret = -EINTR;
+                if (signal_pending(current))
                         break;
-                }
-                remove_kevent(dev, kevent);
 
-                /*
-                 * Must perform the copy_to_user outside the mutex in order
-                 * to avoid a lock order reversal with mmap_sem.
-                 */
-                mutex_unlock(&dev->ev_mutex);
-
-                if (copy_to_user(buf, &kevent->event, event_size)) {
-                        ret = -EFAULT;
+                if (start != buf)
                         break;
-                }
-                buf += event_size;
-                count -= event_size;
-
-                if (kevent->name) {
-                        if (copy_to_user(buf, kevent->name, kevent->event.len)){
-                                ret = -EFAULT;
-                                break;
-                        }
-                        buf += kevent->event.len;
-                        count -= kevent->event.len;
-                }
-
-                free_kevent(kevent);
 
-                mutex_lock(&dev->ev_mutex);
+                schedule();
         }
-        mutex_unlock(&dev->ev_mutex);
 
+        finish_wait(&dev->wq, &wait);
+        if (start != buf && ret != -EFAULT)
+                ret = buf - start;
         return ret;
 }
 
diff --git a/fs/ntfs/Kconfig b/fs/ntfs/Kconfig
new file mode 100644
index 000000000000..f5a868cc9152
--- /dev/null
+++ b/fs/ntfs/Kconfig
@@ -0,0 +1,78 @@
+config NTFS_FS
+        tristate "NTFS file system support"
+        select NLS
+        help
+          NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003.
+
+          Saying Y or M here enables read support.  There is partial, but
+          safe, write support available.  For write support you must also
+          say Y to "NTFS write support" below.
+
+          There are also a number of user-space tools available, called
+          ntfsprogs.  These include ntfsundelete and ntfsresize, that work
+          without NTFS support enabled in the kernel.
+
+          This is a rewrite from scratch of Linux NTFS support and replaced
+          the old NTFS code starting with Linux 2.5.11.  A backport to
+          the Linux 2.4 kernel series is separately available as a patch
+          from the project web site.
+
+          For more information see <file:Documentation/filesystems/ntfs.txt>
+          and <http://www.linux-ntfs.org/>.
+
+          To compile this file system support as a module, choose M here: the
+          module will be called ntfs.
+
+          If you are not using Windows NT, 2000, XP or 2003 in addition to
+          Linux on your computer it is safe to say N.
+
+config NTFS_DEBUG
+        bool "NTFS debugging support"
+        depends on NTFS_FS
+        help
+          If you are experiencing any problems with the NTFS file system, say
+          Y here.  This will result in additional consistency checks to be
+          performed by the driver as well as additional debugging messages to
+          be written to the system log.  Note that debugging messages are
+          disabled by default.  To enable them, supply the option debug_msgs=1
+          at the kernel command line when booting the kernel or as an option
+          to insmod when loading the ntfs module.  Once the driver is active,
+          you can enable debugging messages by doing (as root):
+          echo 1 > /proc/sys/fs/ntfs-debug
+          Replacing the "1" with "0" would disable debug messages.
+
+          If you leave debugging messages disabled, this results in little
+          overhead, but enabling debug messages results in very significant
+          slowdown of the system.
+
+          When reporting bugs, please try to have available a full dump of
+          debugging messages while the misbehaviour was occurring.
+
+config NTFS_RW
+        bool "NTFS write support"
+        depends on NTFS_FS
+        help
+          This enables the partial, but safe, write support in the NTFS driver.
+
+          The only supported operation is overwriting existing files, without
+          changing the file length.  No file or directory creation, deletion or
+          renaming is possible.  Note only non-resident files can be written to
+          so you may find that some very small files (<500 bytes or so) cannot
+          be written to.
+
+          While we cannot guarantee that it will not damage any data, we have
+          so far not received a single report where the driver would have
+          damaged someones data so we assume it is perfectly safe to use.
+
+          Note:  While write support is safe in this version (a rewrite from
+          scratch of the NTFS support), it should be noted that the old NTFS
+          write support, included in Linux 2.5.10 and before (since 1997),
+          is not safe.
+
+          This is currently useful with TopologiLinux.  TopologiLinux is run
+          on top of any DOS/Microsoft Windows system without partitioning your
+          hard disk.  Unlike other Linux distributions TopologiLinux does not
+          need its own partition.  For more information see
+          <http://topologi-linux.sourceforge.net/>
+
+          It is perfectly safe to say N here.
diff --git a/fs/ocfs2/Kconfig b/fs/ocfs2/Kconfig
new file mode 100644
index 000000000000..701b7a3a872e
--- /dev/null
+++ b/fs/ocfs2/Kconfig
@@ -0,0 +1,85 @@
+config OCFS2_FS
+        tristate "OCFS2 file system support"
+        depends on NET && SYSFS
+        select CONFIGFS_FS
+        select JBD2
+        select CRC32
+        select QUOTA
+        select QUOTA_TREE
+        help
+          OCFS2 is a general purpose extent based shared disk cluster file
+          system with many similarities to ext3. It supports 64 bit inode
+          numbers, and has automatically extending metadata groups which may
+          also make it attractive for non-clustered use.
+
+          You'll want to install the ocfs2-tools package in order to at least
+          get "mount.ocfs2".
+
+          Project web page:    http://oss.oracle.com/projects/ocfs2
+          Tools web page:      http://oss.oracle.com/projects/ocfs2-tools
+          OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
+
+          For more information on OCFS2, see the file
+          <file:Documentation/filesystems/ocfs2.txt>.
+
+config OCFS2_FS_O2CB
+        tristate "O2CB Kernelspace Clustering"
+        depends on OCFS2_FS
+        default y
+        help
+          OCFS2 includes a simple kernelspace clustering package, the OCFS2
+          Cluster Base.  It only requires a very small userspace component
+          to configure it. This comes with the standard ocfs2-tools package.
+          O2CB is limited to maintaining a cluster for OCFS2 file systems.
+          It cannot manage any other cluster applications.
+
+          It is always safe to say Y here, as the clustering method is
+          run-time selectable.
+
+config OCFS2_FS_USERSPACE_CLUSTER
+        tristate "OCFS2 Userspace Clustering"
+        depends on OCFS2_FS && DLM
+        default y
+        help
+          This option will allow OCFS2 to use userspace clustering services
+          in conjunction with the DLM in fs/dlm.  If you are using a
+          userspace cluster manager, say Y here.
+
+          It is safe to say Y, as the clustering method is run-time
+          selectable.
+
+config OCFS2_FS_STATS
+        bool "OCFS2 statistics"
+        depends on OCFS2_FS
+        default y
+        help
+          This option allows some fs statistics to be captured. Enabling
+          this option may increase the memory consumption.
+
+config OCFS2_DEBUG_MASKLOG
+        bool "OCFS2 logging support"
+        depends on OCFS2_FS
+        default y
+        help
+          The ocfs2 filesystem has an extensive logging system.  The system
+          allows selection of events to log via files in /sys/o2cb/logmask/.
+          This option will enlarge your kernel, but it allows debugging of
+          ocfs2 filesystem issues.
+
+config OCFS2_DEBUG_FS
+        bool "OCFS2 expensive checks"
+        depends on OCFS2_FS
+        default n
+        help
+          This option will enable expensive consistency checks. Enable
+          this option for debugging only as it is likely to decrease
+          performance of the filesystem.
+
+config OCFS2_FS_POSIX_ACL
+        bool "OCFS2 POSIX Access Control Lists"
+        depends on OCFS2_FS
+        select FS_POSIX_ACL
+        default n
+        help
+          Posix Access Control Lists (ACLs) support permissions for users and
+          groups beyond the owner/group/world scheme.
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index 6aff8f2d3e49..f4efa89baee5 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -810,171 +810,6 @@ out:
         return status;
 }
 
-/* This is difficult. We have to lock quota inode and start transaction
- * in this function but we don't want to take the penalty of exlusive
- * quota file lock when we are just going to use cached structures. So
- * we just take read lock check whether we have dquot cached and if so,
- * we don't have to take the write lock... */
-static int ocfs2_dquot_initialize(struct inode *inode, int type)
-{
-        handle_t *handle = NULL;
-        int status = 0;
-        struct super_block *sb = inode->i_sb;
-        struct ocfs2_mem_dqinfo *oinfo;
-        int exclusive = 0;
-        int cnt;
-        qid_t id;
-
-        mlog_entry_void();
-
-        for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-                if (type != -1 && cnt != type)
-                        continue;
-                if (!sb_has_quota_active(sb, cnt))
-                        continue;
-                oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
-                status = ocfs2_lock_global_qf(oinfo, 0);
-                if (status < 0)
-                        goto out;
-                /* This is just a performance optimization not a reliable test.
-                 * Since we hold an inode lock, noone can actually release
-                 * the structure until we are finished with initialization. */
-                if (inode->i_dquot[cnt] != NODQUOT) {
-                        ocfs2_unlock_global_qf(oinfo, 0);
-                        continue;
-                }
-                /* When we have inode lock, we know that no dquot_release() can
-                 * run and thus we can safely check whether we need to
-                 * read+modify global file to get quota information or whether
-                 * our node already has it. */
-                if (cnt == USRQUOTA)
-                        id = inode->i_uid;
-                else if (cnt == GRPQUOTA)
-                        id = inode->i_gid;
-                else
-                        BUG();
-                /* Obtain exclusion from quota off... */
-                down_write(&sb_dqopt(sb)->dqptr_sem);
-                exclusive = !dquot_is_cached(sb, id, cnt);
-                up_write(&sb_dqopt(sb)->dqptr_sem);
-                if (exclusive) {
-                        status = ocfs2_lock_global_qf(oinfo, 1);
-                        if (status < 0) {
-                                exclusive = 0;
-                                mlog_errno(status);
-                                goto out_ilock;
-                        }
-                        handle = ocfs2_start_trans(OCFS2_SB(sb),
-                                        ocfs2_calc_qinit_credits(sb, cnt));
-                        if (IS_ERR(handle)) {
-                                status = PTR_ERR(handle);
-                                mlog_errno(status);
-                                goto out_ilock;
-                        }
-                }
-                dquot_initialize(inode, cnt);
-                if (exclusive) {
-                        ocfs2_commit_trans(OCFS2_SB(sb), handle);
-                        ocfs2_unlock_global_qf(oinfo, 1);
-                }
-                ocfs2_unlock_global_qf(oinfo, 0);
-        }
-        mlog_exit(0);
-        return 0;
-out_ilock:
-        if (exclusive)
-                ocfs2_unlock_global_qf(oinfo, 1);
-        ocfs2_unlock_global_qf(oinfo, 0);
-out:
-        mlog_exit(status);
-        return status;
-}
-
-static int ocfs2_dquot_drop_slow(struct inode *inode)
-{
-        int status = 0;
-        int cnt;
-        int got_lock[MAXQUOTAS] = {0, 0};
-        handle_t *handle;
-        struct super_block *sb = inode->i_sb;
-        struct ocfs2_mem_dqinfo *oinfo;
-
-        for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-                if (!sb_has_quota_active(sb, cnt))
-                        continue;
-                oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
-                status = ocfs2_lock_global_qf(oinfo, 1);
-                if (status < 0)
-                        goto out;
-                got_lock[cnt] = 1;
-        }
-        handle = ocfs2_start_trans(OCFS2_SB(sb),
-                        ocfs2_calc_qinit_credits(sb, USRQUOTA) +
-                        ocfs2_calc_qinit_credits(sb, GRPQUOTA));
-        if (IS_ERR(handle)) {
-                status = PTR_ERR(handle);
-                mlog_errno(status);
-                goto out;
-        }
-        dquot_drop(inode);
-        ocfs2_commit_trans(OCFS2_SB(sb), handle);
-out:
-        for (cnt = 0; cnt < MAXQUOTAS; cnt++)
-                if (got_lock[cnt]) {
-                        oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
-                        ocfs2_unlock_global_qf(oinfo, 1);
-                }
-        return status;
-}
-
-/* See the comment before ocfs2_dquot_initialize. */
-static int ocfs2_dquot_drop(struct inode *inode)
-{
-        int status = 0;
-        struct super_block *sb = inode->i_sb;
-        struct ocfs2_mem_dqinfo *oinfo;
-        int exclusive = 0;
-        int cnt;
-        int got_lock[MAXQUOTAS] = {0, 0};
-
-        mlog_entry_void();
-        for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-                if (!sb_has_quota_active(sb, cnt))
-                        continue;
-                oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
-                status = ocfs2_lock_global_qf(oinfo, 0);
-                if (status < 0)
-                        goto out;
-                got_lock[cnt] = 1;
-        }
-        /* Lock against anyone releasing references so that when when we check
-         * we know we are not going to be last ones to release dquot */
-        down_write(&sb_dqopt(sb)->dqptr_sem);
-        /* Urgh, this is a terrible hack :( */
-        for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-                if (inode->i_dquot[cnt] != NODQUOT &&
-                    atomic_read(&inode->i_dquot[cnt]->dq_count) > 1) {
-                        exclusive = 1;
-                        break;
-                }
-        }
-        if (!exclusive)
-                dquot_drop_locked(inode);
-        up_write(&sb_dqopt(sb)->dqptr_sem);
-out:
-        for (cnt = 0; cnt < MAXQUOTAS; cnt++)
-                if (got_lock[cnt]) {
-                        oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
-                        ocfs2_unlock_global_qf(oinfo, 0);
-                }
-        /* In case we bailed out because we had to do expensive locking
-         * do it now... */
-        if (exclusive)
-                status = ocfs2_dquot_drop_slow(inode);
-        mlog_exit(status);
-        return status;
-}
-
 static struct dquot *ocfs2_alloc_dquot(struct super_block *sb, int type)
 {
         struct ocfs2_dquot *dquot =
@@ -991,8 +826,8 @@ static void ocfs2_destroy_dquot(struct dquot *dquot)
 }
 
 struct dquot_operations ocfs2_quota_operations = {
-        .initialize     = ocfs2_dquot_initialize,
-        .drop           = ocfs2_dquot_drop,
+        .initialize     = dquot_initialize,
+        .drop           = dquot_drop,
         .alloc_space    = dquot_alloc_space,
         .alloc_inode    = dquot_alloc_inode,
         .free_space     = dquot_free_space,
diff --git a/fs/omfs/Kconfig b/fs/omfs/Kconfig
new file mode 100644
index 000000000000..b1b9a0aba6fd
--- /dev/null
+++ b/fs/omfs/Kconfig
@@ -0,0 +1,13 @@
+config OMFS_FS
+        tristate "SonicBlue Optimized MPEG File System support"
+        depends on BLOCK
+        select CRC_ITU_T
+        help
+          This is the proprietary file system used by the Rio Karma music
+          player and ReplayTV DVR.  Despite the name, this filesystem is not
+          more efficient than a standard FS for MPEG files, in fact likely
+          the opposite is true.  Say Y if you have either of these devices
+          and wish to mount its disk.
+
+          To compile this file system support as a module, choose M here: the
+          module will be called omfs.  If unsure, say N.
diff --git a/fs/qnx4/Kconfig b/fs/qnx4/Kconfig
new file mode 100644
index 000000000000..be8e0e1445b6
--- /dev/null
+++ b/fs/qnx4/Kconfig
@@ -0,0 +1,25 @@
+config QNX4FS_FS
+        tristate "QNX4 file system support (read only)"
+        depends on BLOCK
+        help
+          This is the file system used by the real-time operating systems
+          QNX 4 and QNX 6 (the latter is also called QNX RTP).
+          Further information is available at <http://www.qnx.com/>.
+          Say Y if you intend to mount QNX hard disks or floppies.
+          Unless you say Y to "QNX4FS read-write support" below, you will
+          only be able to read these file systems.
+
+          To compile this file system support as a module, choose M here: the
+          module will be called qnx4.
+
+          If you don't know whether you need it, then you don't need it:
+          answer N.
+
+config QNX4FS_RW
+        bool "QNX4FS write support (DANGEROUS)"
+        depends on QNX4FS_FS && EXPERIMENTAL && BROKEN
+        help
+          Say Y if you want to test write support for QNX4 file systems.
+
+          It's currently broken, so for now:
+          answer N.
diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig
new file mode 100644
index 000000000000..949b8c6addc8
--- /dev/null
+++ b/fs/reiserfs/Kconfig
@@ -0,0 +1,85 @@
+config REISERFS_FS
+        tristate "Reiserfs support"
+        help
+          Stores not just filenames but the files themselves in a balanced
+          tree.  Uses journalling.
+
+          Balanced trees are more efficient than traditional file system
+          architectural foundations.
+
+          In general, ReiserFS is as fast as ext2, but is very efficient with
+          large directories and small files.  Additional patches are needed
+          for NFS and quotas, please see <http://www.namesys.com/> for links.
+
+          It is more easily extended to have features currently found in
+          database and keyword search systems than block allocation based file
+          systems are.  The next version will be so extended, and will support
+          plugins consistent with our motto ``It takes more than a license to
+          make source code open.''
+
+          Read <http://www.namesys.com/> to learn more about reiserfs.
+
+          Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
+
+          If you like it, you can pay us to add new features to it that you
+          need, buy a support contract, or pay us to port it to another OS.
+
+config REISERFS_CHECK
+        bool "Enable reiserfs debug mode"
+        depends on REISERFS_FS
+        help
+          If you set this to Y, then ReiserFS will perform every check it can
+          possibly imagine of its internal consistency throughout its
+          operation.  It will also go substantially slower.  More than once we
+          have forgotten that this was on, and then gone despondent over the
+          latest benchmarks.:-) Use of this option allows our team to go all
+          out in checking for consistency when debugging without fear of its
+          effect on end users.  If you are on the verge of sending in a bug
+          report, say Y and you might get a useful error message.  Almost
+          everyone should say N.
+
+config REISERFS_PROC_INFO
+        bool "Stats in /proc/fs/reiserfs"
+        depends on REISERFS_FS && PROC_FS
+        help
+          Create under /proc/fs/reiserfs a hierarchy of files, displaying
+          various ReiserFS statistics and internal data at the expense of
+          making your kernel or module slightly larger (+8 KB). This also
+          increases the amount of kernel memory required for each mount.
+          Almost everyone but ReiserFS developers and people fine-tuning
+          reiserfs or tracing problems should say N.
+
+config REISERFS_FS_XATTR
+        bool "ReiserFS extended attributes"
+        depends on REISERFS_FS
+        help
+          Extended attributes are name:value pairs associated with inodes by
+          the kernel or by users (see the attr(5) manual page, or visit
+          <http://acl.bestbits.at/> for details).
+
+          If unsure, say N.
+
+config REISERFS_FS_POSIX_ACL
+        bool "ReiserFS POSIX Access Control Lists"
+        depends on REISERFS_FS_XATTR
+        select FS_POSIX_ACL
+        help
+          Posix Access Control Lists (ACLs) support permissions for users and
+          groups beyond the owner/group/world scheme.
+
+          To learn more about Access Control Lists, visit the Posix ACLs for
+          Linux website <http://acl.bestbits.at/>.
+
+          If you don't know what Access Control Lists are, say N
+
+config REISERFS_FS_SECURITY
+        bool "ReiserFS Security Labels"
+        depends on REISERFS_FS_XATTR
+        help
+          Security labels support alternative access control models
+          implemented by security modules like SELinux.  This option
+          enables an extended attribute handler for file security
+          labels in the ReiserFS filesystem.
+
+          If you are not using a security module that requires using
+          extended attributes for file security labels, say N.
diff --git a/fs/romfs/Kconfig b/fs/romfs/Kconfig
new file mode 100644
index 000000000000..1a17020f9faf
--- /dev/null
+++ b/fs/romfs/Kconfig
@@ -0,0 +1,16 @@
+config ROMFS_FS
+        tristate "ROM file system support"
+        depends on BLOCK
+        ---help---
+          This is a very small read-only file system mainly intended for
+          initial ram disks of installation disks, but it could be used for
+          other read-only media as well.  Read
+          <file:Documentation/filesystems/romfs.txt> for details.
+
+          To compile this file system support as a module, choose M here: the
+          module will be called romfs.  Note that the file system of your
+          root partition (the one containing the directory /) cannot be a
+          module.
+
+          If you don't know whether you need it, then you don't need it:
+          answer N.
diff --git a/fs/smbfs/Kconfig b/fs/smbfs/Kconfig
new file mode 100644
index 000000000000..e668127c8b2e
--- /dev/null
+++ b/fs/smbfs/Kconfig
@@ -0,0 +1,55 @@
+config SMB_FS
+        tristate "SMB file system support (OBSOLETE, please use CIFS)"
+        depends on INET
+        select NLS
+        help
+          SMB (Server Message Block) is the protocol Windows for Workgroups
+          (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
+          files and printers over local networks.  Saying Y here allows you to
+          mount their file systems (often called "shares" in this context) and
+          access them just like any other Unix directory.  Currently, this
+          works only if the Windows machines use TCP/IP as the underlying
+          transport protocol, and not NetBEUI.  For details, read
+          <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
+          available from <http://www.tldp.org/docs.html#howto>.
+
+          Note: if you just want your box to act as an SMB *server* and make
+          files and printing services available to Windows clients (which need
+          to have a TCP/IP stack), you don't need to say Y here; you can use
+          the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
+          for that.
+
+          General information about how to connect Linux, Windows machines and
+          Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+          To compile the SMB support as a module, choose M here:
+          the module will be called smbfs.  Most people say N, however.
+
+config SMB_NLS_DEFAULT
+        bool "Use a default NLS"
+        depends on SMB_FS
+        help
+          Enabling this will make smbfs use nls translations by default. You
+          need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
+          settings and you need to give the default nls for the SMB server as
+          CONFIG_SMB_NLS_REMOTE.
+
+          The nls settings can be changed at mount time, if your smbmount
+          supports that, using the codepage and iocharset parameters.
+
+          smbmount from samba 2.2.0 or later supports this.
+
+config SMB_NLS_REMOTE
+        string "Default Remote NLS Option"
+        depends on SMB_NLS_DEFAULT
+        default "cp437"
+        help
+          This setting allows you to specify a default value for which
+          codepage the server uses. If this field is left blank no
+          translations will be done by default. The local codepage/charset
+          default to CONFIG_NLS_DEFAULT.
+
+          The nls settings can be changed at mount time, if your smbmount
+          supports that, using the codepage and iocharset parameters.
+
+          smbmount from samba 2.2.0 or later supports this.
diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig
new file mode 100644
index 000000000000..25a00d19d686
--- /dev/null
+++ b/fs/squashfs/Kconfig
@@ -0,0 +1,51 @@
+config SQUASHFS
+        tristate "SquashFS 4.0 - Squashed file system support"
+        depends on BLOCK
+        select ZLIB_INFLATE
+        help
+          Saying Y here includes support for SquashFS 4.0 (a Compressed
+          Read-Only File System).  Squashfs is a highly compressed read-only
+          filesystem for Linux.  It uses zlib compression to compress both
+          files, inodes and directories.  Inodes in the system are very small
+          and all blocks are packed to minimise data overhead. Block sizes
+          greater than 4K are supported up to a maximum of 1 Mbytes (default
+          block size 128K).  SquashFS 4.0 supports 64 bit filesystems and files
+          (larger than 4GB), full uid/gid information, hard links and
+          timestamps.  
+
+          Squashfs is intended for general read-only filesystem use, for
+          archival use (i.e. in cases where a .tar.gz file may be used), and in
+          embedded systems where low overhead is needed.  Further information
+          and tools are available from http://squashfs.sourceforge.net.
+
+          If you want to compile this as a module ( = code which can be
+          inserted in and removed from the running kernel whenever you want),
+          say M here and read <file:Documentation/modules.txt>.  The module
+          will be called squashfs.  Note that the root file system (the one
+          containing the directory /) cannot be compiled as a module.
+
+          If unsure, say N.
+
+config SQUASHFS_EMBEDDED
+
+        bool "Additional option for memory-constrained systems" 
+        depends on SQUASHFS
+        default n
+        help
+          Saying Y here allows you to specify cache size.
+
+          If unsure, say N.
+
+config SQUASHFS_FRAGMENT_CACHE_SIZE
+        int "Number of fragments cached" if SQUASHFS_EMBEDDED
+        depends on SQUASHFS
+        default "3"
+        help
+          By default SquashFS caches the last 3 fragments read from
+          the filesystem.  Increasing this amount may mean SquashFS
+          has to re-read fragments less often from disk, at the expense
+          of extra system memory.  Decreasing this amount will mean
+          SquashFS uses less memory at the expense of extra reads from disk.
+
+          Note there must be at least one cached fragment.  Anything
+          much more than three will probably not make much difference.
diff --git a/fs/sysfs/Kconfig b/fs/sysfs/Kconfig
new file mode 100644
index 000000000000..f4b67588b9d6
--- /dev/null
+++ b/fs/sysfs/Kconfig
@@ -0,0 +1,23 @@
+config SYSFS
+        bool "sysfs file system support" if EMBEDDED
+        default y
+        help
+        The sysfs filesystem is a virtual filesystem that the kernel uses to
+        export internal kernel objects, their attributes, and their
+        relationships to one another.
+
+        Users can use sysfs to ascertain useful information about the running
+        kernel, such as the devices the kernel has discovered on each bus and
+        which driver each is bound to. sysfs can also be used to tune devices
+        and other kernel subsystems.
+
+        Some system agents rely on the information in sysfs to operate.
+        /sbin/hotplug uses device and object attributes in sysfs to assist in
+        delegating policy decisions, like persistently naming devices.
+
+        sysfs is currently used by the block subsystem to mount the root
+        partition.  If sysfs is disabled you must specify the boot device on
+        the kernel boot command line via its major and minor numbers.  For
+        example, "root=03:01" for /dev/hda1.
+
+        Designers of embedded systems may wish to say N here to conserve space.
diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c
index 66f6e58a7e4b..f2c478c3424e 100644
--- a/fs/sysfs/bin.c
+++ b/fs/sysfs/bin.c
@@ -63,6 +63,9 @@ read(struct file *file, char __user *userbuf, size_t bytes, loff_t *off)
         int count = min_t(size_t, bytes, PAGE_SIZE);
         char *temp;
 
+        if (!bytes)
+                return 0;
+
         if (size) {
                 if (offs > size)
                         return 0;
@@ -131,6 +134,9 @@ static ssize_t write(struct file *file, const char __user *userbuf,
         int count = min_t(size_t, bytes, PAGE_SIZE);
         char *temp;
 
+        if (!bytes)
+                return 0;
+
         if (size) {
                 if (offs > size)
                         return 0;
diff --git a/fs/sysv/Kconfig b/fs/sysv/Kconfig
new file mode 100644
index 000000000000..33aeb4b75db1
--- /dev/null
+++ b/fs/sysv/Kconfig
@@ -0,0 +1,36 @@
+config SYSV_FS
+        tristate "System V/Xenix/V7/Coherent file system support"
+        depends on BLOCK
+        help
+          SCO, Xenix and Coherent are commercial Unix systems for Intel
+          machines, and Version 7 was used on the DEC PDP-11. Saying Y
+          here would allow you to read from their floppies and hard disk
+          partitions.
+
+          If you have floppies or hard disk partitions like that, it is likely
+          that they contain binaries from those other Unix systems; in order
+          to run these binaries, you will want to install linux-abi which is
+          a set of kernel modules that lets you run SCO, Xenix, Wyse,
+          UnixWare, Dell Unix and System V programs under Linux.  It is
+          available via FTP (user: ftp) from
+          <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
+          NOTE: that will work only for binaries from Intel-based systems;
+          PDP ones will have to wait until somebody ports Linux to -11 ;-)
+
+          If you only intend to mount files from some other Unix over the
+          network using NFS, you don't need the System V file system support
+          (but you need NFS file system support obviously).
+
+          Note that this option is generally not needed for floppies, since a
+          good portable way to transport files and directories between unixes
+          (and even other operating systems) is given by the tar program ("man
+          tar" or preferably "info tar").  Note also that this option has
+          nothing whatsoever to do with the option "System V IPC". Read about
+          the System V file system in
+          <file:Documentation/filesystems/sysv-fs.txt>.
+          Saying Y here will enlarge your kernel by about 27 KB.
+
+          To compile this as a module, choose M here: the module will be called
+          sysv.
+
+          If you haven't heard about all of this before, it's safe to say N.
diff --git a/fs/udf/Kconfig b/fs/udf/Kconfig
new file mode 100644
index 000000000000..0e0e99bd6bce
--- /dev/null
+++ b/fs/udf/Kconfig
@@ -0,0 +1,18 @@
+config UDF_FS
+        tristate "UDF file system support"
+        select CRC_ITU_T
+        help
+          This is the new file system used on some CD-ROMs and DVDs. Say Y if
+          you intend to mount DVD discs or CDRW's written in packet mode, or
+          if written to by other UDF utilities, such as DirectCD.
+          Please read <file:Documentation/filesystems/udf.txt>.
+
+          To compile this file system support as a module, choose M here: the
+          module will be called udf.
+
+          If unsure, say N.
+
+config UDF_NLS
+        bool
+        default y
+        depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
diff --git a/fs/ufs/Kconfig b/fs/ufs/Kconfig
new file mode 100644
index 000000000000..e4f10a40768a
--- /dev/null
+++ b/fs/ufs/Kconfig
@@ -0,0 +1,43 @@
+config UFS_FS
+        tristate "UFS file system support (read only)"
+        depends on BLOCK
+        help
+          BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
+          OpenBSD and NeXTstep) use a file system called UFS. Some System V
+          Unixes can create and mount hard disk partitions and diskettes using
+          this file system as well. Saying Y here will allow you to read from
+          these partitions; if you also want to write to them, say Y to the
+          experimental "UFS file system write support", below. Please read the
+          file <file:Documentation/filesystems/ufs.txt> for more information.
+
+          The recently released UFS2 variant (used in FreeBSD 5.x) is
+          READ-ONLY supported.
+
+          Note that this option is generally not needed for floppies, since a
+          good portable way to transport files and directories between unixes
+          (and even other operating systems) is given by the tar program ("man
+          tar" or preferably "info tar").
+
+          When accessing NeXTstep files, you may need to convert them from the
+          NeXT character set to the Latin1 character set; use the program
+          recode ("info recode") for this purpose.
+
+          To compile the UFS file system support as a module, choose M here: the
+          module will be called ufs.
+
+          If you haven't heard about all of this before, it's safe to say N.
+
+config UFS_FS_WRITE
+        bool "UFS file system write support (DANGEROUS)"
+        depends on UFS_FS && EXPERIMENTAL
+        help
+          Say Y here if you want to try writing to UFS partitions. This is
+          experimental, so you should back up your UFS partitions beforehand.
+
+config UFS_DEBUG
+        bool "UFS debugging"
+        depends on UFS_FS
+        help
+          If you are experiencing any problems with the UFS filesystem, say
+          Y here.  This will result in _many_ additional debugging messages to be
+          written to the system log.
diff --git a/fs/xfs/Kconfig b/fs/xfs/Kconfig
index 3f53dd101f99..29228f5899cd 100644
--- a/fs/xfs/Kconfig
+++ b/fs/xfs/Kconfig
@@ -1,6 +1,7 @@
 config XFS_FS
         tristate "XFS filesystem support"
         depends on BLOCK
+        select EXPORTFS
         help
           XFS is a high performance journaling filesystem which originated
           on the SGI IRIX platform.  It is completely multi-threaded, can
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index e5be1e0be802..4bd112313f33 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -50,12 +50,14 @@
 #include "xfs_vnodeops.h"
 #include "xfs_quota.h"
 #include "xfs_inode_item.h"
+#include "xfs_export.h"
 
 #include <linux/capability.h>
 #include <linux/dcache.h>
 #include <linux/mount.h>
 #include <linux/namei.h>
 #include <linux/pagemap.h>
+#include <linux/exportfs.h>
 
 /*
  * xfs_find_handle maps from userspace xfs_fsop_handlereq structure to
@@ -164,97 +166,69 @@ xfs_find_handle(
         return 0;
 }
 
-
 /*
- * Convert userspace handle data into inode.
- *
- * We use the fact that all the fsop_handlereq ioctl calls have a data
- * structure argument whose first component is always a xfs_fsop_handlereq_t,
- * so we can pass that sub structure into this handy, shared routine.
- *
- * If no error, caller must always iput the returned inode.
+ * No need to do permission checks on the various pathname components
+ * as the handle operations are privileged.
  */
 STATIC int
-xfs_vget_fsop_handlereq(
-        xfs_mount_t             *mp,
-        struct inode            *parinode,      /* parent inode pointer    */
-        xfs_fsop_handlereq_t    *hreq,
-        struct inode            **inode)
+xfs_handle_acceptable(
+        void                    *context,
+        struct dentry           *dentry)
+{
+        return 1;
+}
+
+/*
+ * Convert userspace handle data into a dentry.
+ */
+struct dentry *
+xfs_handle_to_dentry(
+        struct file             *parfilp,
+        void __user             *uhandle,
+        u32                     hlen)
 {
-        void                    __user *hanp;
-        size_t                  hlen;
-        xfs_fid_t               *xfid;
-        xfs_handle_t            *handlep;
         xfs_handle_t            handle;
-        xfs_inode_t             *ip;
-        xfs_ino_t               ino;
-        __u32                   igen;
-        int                     error;
+        struct xfs_fid64        fid;
 
         /*
          * Only allow handle opens under a directory.
          */
-        if (!S_ISDIR(parinode->i_mode))
-                return XFS_ERROR(ENOTDIR);
-
-        hanp = hreq->ihandle;
-        hlen = hreq->ihandlen;
-        handlep = &handle;
-
-        if (hlen < sizeof(handlep->ha_fsid) || hlen > sizeof(*handlep))
-                return XFS_ERROR(EINVAL);
-        if (copy_from_user(handlep, hanp, hlen))
-                return XFS_ERROR(EFAULT);
-        if (hlen < sizeof(*handlep))
-                memset(((char *)handlep) + hlen, 0, sizeof(*handlep) - hlen);
-        if (hlen > sizeof(handlep->ha_fsid)) {
-                if (handlep->ha_fid.fid_len !=
-                    (hlen - sizeof(handlep->ha_fsid) -
-                            sizeof(handlep->ha_fid.fid_len)) ||
-                    handlep->ha_fid.fid_pad)
-                        return XFS_ERROR(EINVAL);
-        }
-
-        /*
-         * Crack the handle, obtain the inode # & generation #
-         */
-        xfid = (struct xfs_fid *)&handlep->ha_fid;
-        if (xfid->fid_len == sizeof(*xfid) - sizeof(xfid->fid_len)) {
-                ino  = xfid->fid_ino;
-                igen = xfid->fid_gen;
-        } else {
-                return XFS_ERROR(EINVAL);
-        }
-
-        /*
-         * Get the XFS inode, building a Linux inode to go with it.
-         */
-        error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0);
-        if (error)
-                return error;
-        if (ip == NULL)
-                return XFS_ERROR(EIO);
-        if (ip->i_d.di_gen != igen) {
-                xfs_iput_new(ip, XFS_ILOCK_SHARED);
-                return XFS_ERROR(ENOENT);
-        }
-
-        xfs_iunlock(ip, XFS_ILOCK_SHARED);
+        if (!S_ISDIR(parfilp->f_path.dentry->d_inode->i_mode))
+                return ERR_PTR(-ENOTDIR);
+
+        if (hlen != sizeof(xfs_handle_t))
+                return ERR_PTR(-EINVAL);
+        if (copy_from_user(&handle, uhandle, hlen))
+                return ERR_PTR(-EFAULT);
+        if (handle.ha_fid.fid_len !=
+            sizeof(handle.ha_fid) - sizeof(handle.ha_fid.fid_len))
+                return ERR_PTR(-EINVAL);
+
+        memset(&fid, 0, sizeof(struct fid));
+        fid.ino = handle.ha_fid.fid_ino;
+        fid.gen = handle.ha_fid.fid_gen;
+
+        return exportfs_decode_fh(parfilp->f_path.mnt, (struct fid *)&fid, 3,
+                        FILEID_INO32_GEN | XFS_FILEID_TYPE_64FLAG,
+                        xfs_handle_acceptable, NULL);
+}
 
-        *inode = VFS_I(ip);
-        return 0;
+STATIC struct dentry *
+xfs_handlereq_to_dentry(
+        struct file             *parfilp,
+        xfs_fsop_handlereq_t    *hreq)
+{
+        return xfs_handle_to_dentry(parfilp, hreq->ihandle, hreq->ihandlen);
 }
 
 int
 xfs_open_by_handle(
-        xfs_mount_t             *mp,
-        xfs_fsop_handlereq_t    *hreq,
         struct file             *parfilp,
-        struct inode            *parinode)
+        xfs_fsop_handlereq_t    *hreq)
 {
         const struct cred       *cred = current_cred();
         int                     error;
-        int                     new_fd;
+        int                     fd;
         int                     permflag;
         struct file             *filp;
         struct inode            *inode;
@@ -263,19 +237,21 @@ xfs_open_by_handle(
         if (!capable(CAP_SYS_ADMIN))
                 return -XFS_ERROR(EPERM);
 
-        error = xfs_vget_fsop_handlereq(mp, parinode, hreq, &inode);
-        if (error)
-                return -error;
+        dentry = xfs_handlereq_to_dentry(parfilp, hreq);
+        if (IS_ERR(dentry))
+                return PTR_ERR(dentry);
+        inode = dentry->d_inode;
 
         /* Restrict xfs_open_by_handle to directories & regular files. */
         if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode))) {
-                iput(inode);
-                return -XFS_ERROR(EINVAL);
+                error = -XFS_ERROR(EPERM);
+                goto out_dput;
         }
 
 #if BITS_PER_LONG != 32
         hreq->oflags |= O_LARGEFILE;
 #endif
+
         /* Put open permission in namei format. */
         permflag = hreq->oflags;
         if ((permflag+1) & O_ACCMODE)
@@ -285,50 +261,45 @@ xfs_open_by_handle(
 
         if ((!(permflag & O_APPEND) || (permflag & O_TRUNC)) &&
             (permflag & FMODE_WRITE) && IS_APPEND(inode)) {
-                iput(inode);
-                return -XFS_ERROR(EPERM);
+                error = -XFS_ERROR(EPERM);
+                goto out_dput;
         }
 
         if ((permflag & FMODE_WRITE) && IS_IMMUTABLE(inode)) {
-                iput(inode);
-                return -XFS_ERROR(EACCES);
+                error = -XFS_ERROR(EACCES);
+                goto out_dput;
         }
 
         /* Can't write directories. */
-        if ( S_ISDIR(inode->i_mode) && (permflag & FMODE_WRITE)) {
-                iput(inode);
-                return -XFS_ERROR(EISDIR);
+        if (S_ISDIR(inode->i_mode) && (permflag & FMODE_WRITE)) {
+                error = -XFS_ERROR(EISDIR);
+                goto out_dput;
         }
 
-        if ((new_fd = get_unused_fd()) < 0) {
-                iput(inode);
-                return new_fd;
+        fd = get_unused_fd();
+        if (fd < 0) {
+                error = fd;
+                goto out_dput;
         }
 
-        dentry = d_obtain_alias(inode);
-        if (IS_ERR(dentry)) {
-                put_unused_fd(new_fd);
-                return PTR_ERR(dentry);
-        }
-
-        /* Ensure umount returns EBUSY on umounts while this file is open. */
-        mntget(parfilp->f_path.mnt);
-
-        /* Create file pointer. */
-        filp = dentry_open(dentry, parfilp->f_path.mnt, hreq->oflags, cred);
+        filp = dentry_open(dentry, mntget(parfilp->f_path.mnt),
+                           hreq->oflags, cred);
         if (IS_ERR(filp)) {
-                put_unused_fd(new_fd);
-                return -XFS_ERROR(-PTR_ERR(filp));
+                put_unused_fd(fd);
+                return PTR_ERR(filp);
         }
 
         if (inode->i_mode & S_IFREG) {
-                /* invisible operation should not change atime */
                 filp->f_flags |= O_NOATIME;
                 filp->f_mode |= FMODE_NOCMTIME;
         }
 
-        fd_install(new_fd, filp);
-        return new_fd;
+        fd_install(fd, filp);
+        return fd;
+
+ out_dput:
+        dput(dentry);
+        return error;
 }
 
 /*
@@ -359,11 +330,10 @@ do_readlink(
 
 int
 xfs_readlink_by_handle(
-        xfs_mount_t             *mp,
-        xfs_fsop_handlereq_t    *hreq,
-        struct inode            *parinode)
+        struct file             *parfilp,
+        xfs_fsop_handlereq_t    *hreq)
 {
-        struct inode            *inode;
+        struct dentry           *dentry;
         __u32                   olen;
         void                    *link;
         int                     error;
@@ -371,26 +341,28 @@ xfs_readlink_by_handle(
         if (!capable(CAP_SYS_ADMIN))
                 return -XFS_ERROR(EPERM);
 
-        error = xfs_vget_fsop_handlereq(mp, parinode, hreq, &inode);
-        if (error)
-                return -error;
+        dentry = xfs_handlereq_to_dentry(parfilp, hreq);
+        if (IS_ERR(dentry))
+                return PTR_ERR(dentry);
 
         /* Restrict this handle operation to symlinks only. */
-        if (!S_ISLNK(inode->i_mode)) {
+        if (!S_ISLNK(dentry->d_inode->i_mode)) {
                 error = -XFS_ERROR(EINVAL);
-                goto out_iput;
+                goto out_dput;
         }
 
         if (copy_from_user(&olen, hreq->ohandlen, sizeof(__u32))) {
                 error = -XFS_ERROR(EFAULT);
-                goto out_iput;
+                goto out_dput;
         }
 
         link = kmalloc(MAXPATHLEN+1, GFP_KERNEL);
-        if (!link)
-                goto out_iput;
+        if (!link) {
+                error = -XFS_ERROR(ENOMEM);
+                goto out_dput;
+        }
 
-        error = -xfs_readlink(XFS_I(inode), link);
+        error = -xfs_readlink(XFS_I(dentry->d_inode), link);
         if (error)
                 goto out_kfree;
         error = do_readlink(hreq->ohandle, olen, link);
@@ -399,32 +371,31 @@ xfs_readlink_by_handle(
 
  out_kfree:
         kfree(link);
- out_iput:
-        iput(inode);
+ out_dput:
+        dput(dentry);
         return error;
 }
 
 STATIC int
 xfs_fssetdm_by_handle(
-        xfs_mount_t             *mp,
-        void                    __user *arg,
-        struct inode            *parinode)
+        struct file             *parfilp,
+        void                    __user *arg)
 {
         int                     error;
         struct fsdmidata        fsd;
         xfs_fsop_setdm_handlereq_t dmhreq;
-        struct inode            *inode;
+        struct dentry           *dentry;
 
         if (!capable(CAP_MKNOD))
                 return -XFS_ERROR(EPERM);
         if (copy_from_user(&dmhreq, arg, sizeof(xfs_fsop_setdm_handlereq_t)))
                 return -XFS_ERROR(EFAULT);
 
-        error = xfs_vget_fsop_handlereq(mp, parinode, &dmhreq.hreq, &inode);
-        if (error)
-                return -error;
+        dentry = xfs_handlereq_to_dentry(parfilp, &dmhreq.hreq);
+        if (IS_ERR(dentry))
+                return PTR_ERR(dentry);
 
-        if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) {
+        if (IS_IMMUTABLE(dentry->d_inode) || IS_APPEND(dentry->d_inode)) {
                 error = -XFS_ERROR(EPERM);
                 goto out;
         }
@@ -434,24 +405,23 @@ xfs_fssetdm_by_handle(
                 goto out;
         }
 
-        error = -xfs_set_dmattrs(XFS_I(inode), fsd.fsd_dmevmask,
+        error = -xfs_set_dmattrs(XFS_I(dentry->d_inode), fsd.fsd_dmevmask,
                                  fsd.fsd_dmstate);
 
  out:
-        iput(inode);
+        dput(dentry);
         return error;
 }
 
 STATIC int
 xfs_attrlist_by_handle(
-        xfs_mount_t             *mp,
-        void                    __user *arg,
-        struct inode            *parinode)
+        struct file             *parfilp,
+        void                    __user *arg)
 {
-        int                     error;
+        int                     error = -ENOMEM;
         attrlist_cursor_kern_t  *cursor;
         xfs_fsop_attrlist_handlereq_t al_hreq;
-        struct inode            *inode;
+        struct dentry           *dentry;
         char                    *kbuf;
 
         if (!capable(CAP_SYS_ADMIN))
@@ -467,16 +437,16 @@ xfs_attrlist_by_handle(
         if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE))
                 return -XFS_ERROR(EINVAL);
 
-        error = xfs_vget_fsop_handlereq(mp, parinode, &al_hreq.hreq, &inode);
-        if (error)
-                goto out;
+        dentry = xfs_handlereq_to_dentry(parfilp, &al_hreq.hreq);
+        if (IS_ERR(dentry))
+                return PTR_ERR(dentry);
 
         kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL);
         if (!kbuf)
-                goto out_vn_rele;
+                goto out_dput;
 
         cursor = (attrlist_cursor_kern_t *)&al_hreq.pos;
-        error = xfs_attr_list(XFS_I(inode), kbuf, al_hreq.buflen,
+        error = -xfs_attr_list(XFS_I(dentry->d_inode), kbuf, al_hreq.buflen,
                                         al_hreq.flags, cursor);
         if (error)
                 goto out_kfree;
@@ -486,10 +456,9 @@ xfs_attrlist_by_handle(
 
  out_kfree:
         kfree(kbuf);
- out_vn_rele:
-        iput(inode);
- out:
-        return -error;
+ out_dput:
+        dput(dentry);
+        return error;
 }
 
 int
@@ -564,15 +533,13 @@ xfs_attrmulti_attr_remove(
 
 STATIC int
 xfs_attrmulti_by_handle(
-        xfs_mount_t             *mp,
-        void                    __user *arg,
         struct file             *parfilp,
-        struct inode            *parinode)
+        void                    __user *arg)
 {
         int                     error;
         xfs_attr_multiop_t      *ops;
         xfs_fsop_attrmulti_handlereq_t am_hreq;
-        struct inode            *inode;
+        struct dentry           *dentry;
         unsigned int            i, size;
         char                    *attr_name;
 
@@ -581,19 +548,19 @@ xfs_attrmulti_by_handle(
         if (copy_from_user(&am_hreq, arg, sizeof(xfs_fsop_attrmulti_handlereq_t)))
                 return -XFS_ERROR(EFAULT);
 
-        error = xfs_vget_fsop_handlereq(mp, parinode, &am_hreq.hreq, &inode);
-        if (error)
-                goto out;
+        dentry = xfs_handlereq_to_dentry(parfilp, &am_hreq.hreq);
+        if (IS_ERR(dentry))
+                return PTR_ERR(dentry);
 
         error = E2BIG;
         size = am_hreq.opcount * sizeof(xfs_attr_multiop_t);
         if (!size || size > 16 * PAGE_SIZE)
-                goto out_vn_rele;
+                goto out_dput;
 
         error = ENOMEM;
         ops = kmalloc(size, GFP_KERNEL);
         if (!ops)
-                goto out_vn_rele;
+                goto out_dput;
 
         error = EFAULT;
         if (copy_from_user(ops, am_hreq.ops, size))
@@ -615,25 +582,28 @@ xfs_attrmulti_by_handle(
 
                 switch (ops[i].am_opcode) {
                 case ATTR_OP_GET:
-                        ops[i].am_error = xfs_attrmulti_attr_get(inode,
-                                        attr_name, ops[i].am_attrvalue,
-                                        &ops[i].am_length, ops[i].am_flags);
+                        ops[i].am_error = xfs_attrmulti_attr_get(
+                                        dentry->d_inode, attr_name,
+                                        ops[i].am_attrvalue, &ops[i].am_length,
+                                        ops[i].am_flags);
                         break;
                 case ATTR_OP_SET:
                         ops[i].am_error = mnt_want_write(parfilp->f_path.mnt);
                         if (ops[i].am_error)
                                 break;
-                        ops[i].am_error = xfs_attrmulti_attr_set(inode,
-                                        attr_name, ops[i].am_attrvalue,
-                                        ops[i].am_length, ops[i].am_flags);
+                        ops[i].am_error = xfs_attrmulti_attr_set(
+                                        dentry->d_inode, attr_name,
+                                        ops[i].am_attrvalue, ops[i].am_length,
+                                        ops[i].am_flags);
                         mnt_drop_write(parfilp->f_path.mnt);
                         break;
                 case ATTR_OP_REMOVE:
                         ops[i].am_error = mnt_want_write(parfilp->f_path.mnt);
                         if (ops[i].am_error)
                                 break;
-                        ops[i].am_error = xfs_attrmulti_attr_remove(inode,
-                                        attr_name, ops[i].am_flags);
+                        ops[i].am_error = xfs_attrmulti_attr_remove(
+                                        dentry->d_inode, attr_name,
+                                        ops[i].am_flags);
                         mnt_drop_write(parfilp->f_path.mnt);
                         break;
                 default:
@@ -647,9 +617,8 @@ xfs_attrmulti_by_handle(
         kfree(attr_name);
  out_kfree_ops:
         kfree(ops);
- out_vn_rele:
-        iput(inode);
- out:
+ out_dput:
+        dput(dentry);
         return -error;
 }
 
@@ -1440,23 +1409,23 @@ xfs_file_ioctl(
 
                 if (copy_from_user(&hreq, arg, sizeof(xfs_fsop_handlereq_t)))
                         return -XFS_ERROR(EFAULT);
-                return xfs_open_by_handle(mp, &hreq, filp, inode);
+                return xfs_open_by_handle(filp, &hreq);
         }
         case XFS_IOC_FSSETDM_BY_HANDLE:
-                return xfs_fssetdm_by_handle(mp, arg, inode);
+                return xfs_fssetdm_by_handle(filp, arg);
 
         case XFS_IOC_READLINK_BY_HANDLE: {
                 xfs_fsop_handlereq_t    hreq;
 
                 if (copy_from_user(&hreq, arg, sizeof(xfs_fsop_handlereq_t)))
                         return -XFS_ERROR(EFAULT);
-                return xfs_readlink_by_handle(mp, &hreq, inode);
+                return xfs_readlink_by_handle(filp, &hreq);
         }
         case XFS_IOC_ATTRLIST_BY_HANDLE:
-                return xfs_attrlist_by_handle(mp, arg, inode);
+                return xfs_attrlist_by_handle(filp, arg);
 
         case XFS_IOC_ATTRMULTI_BY_HANDLE:
-                return xfs_attrmulti_by_handle(mp, arg, filp, inode);
+                return xfs_attrmulti_by_handle(filp, arg);
 
         case XFS_IOC_SWAPEXT: {
                 struct xfs_swapext      sxp;
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.h b/fs/xfs/linux-2.6/xfs_ioctl.h
index 8c16bf2d7e03..7bd7c6afc1eb 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.h
+++ b/fs/xfs/linux-2.6/xfs_ioctl.h
@@ -34,16 +34,13 @@ xfs_find_handle(
 
 extern int
 xfs_open_by_handle(
-        xfs_mount_t             *mp,
-        xfs_fsop_handlereq_t    *hreq,
         struct file             *parfilp,
-        struct inode            *parinode);
+        xfs_fsop_handlereq_t    *hreq);
 
 extern int
 xfs_readlink_by_handle(
-        xfs_mount_t             *mp,
-        xfs_fsop_handlereq_t    *hreq,
-        struct inode            *parinode);
+        struct file             *parfilp,
+        xfs_fsop_handlereq_t    *hreq);
 
 extern int
 xfs_attrmulti_attr_get(
@@ -67,6 +64,12 @@ xfs_attrmulti_attr_remove(
         char                    *name,
         __uint32_t              flags);
 
+extern struct dentry *
+xfs_handle_to_dentry(
+        struct file             *parfilp,
+        void __user             *uhandle,
+        u32                     hlen);
+
 extern long
 xfs_file_ioctl(
         struct file             *filp,
diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c
index 50903ad3182e..c70c4e3db790 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl32.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl32.c
@@ -17,6 +17,7 @@
  */
 #include <linux/compat.h>
 #include <linux/ioctl.h>
+#include <linux/mount.h>
 #include <asm/uaccess.h>
 #include "xfs.h"
 #include "xfs_fs.h"
@@ -340,96 +341,24 @@ xfs_compat_handlereq_copyin(
         return 0;
 }
 
-/*
- * Convert userspace handle data into inode.
- *
- * We use the fact that all the fsop_handlereq ioctl calls have a data
- * structure argument whose first component is always a xfs_fsop_handlereq_t,
- * so we can pass that sub structure into this handy, shared routine.
- *
- * If no error, caller must always iput the returned inode.
- */
-STATIC int
-xfs_vget_fsop_handlereq_compat(
-        xfs_mount_t             *mp,
-        struct inode            *parinode,      /* parent inode pointer    */
-        compat_xfs_fsop_handlereq_t     *hreq,
-        struct inode            **inode)
+STATIC struct dentry *
+xfs_compat_handlereq_to_dentry(
+        struct file             *parfilp,
+        compat_xfs_fsop_handlereq_t *hreq)
 {
-        void                    __user *hanp;
-        size_t                  hlen;
-        xfs_fid_t               *xfid;
-        xfs_handle_t            *handlep;
-        xfs_handle_t            handle;
-        xfs_inode_t             *ip;
-        xfs_ino_t               ino;
-        __u32                   igen;
-        int                     error;
-
-        /*
-         * Only allow handle opens under a directory.
-         */
-        if (!S_ISDIR(parinode->i_mode))
-                return XFS_ERROR(ENOTDIR);
-
-        hanp = compat_ptr(hreq->ihandle);
-        hlen = hreq->ihandlen;
-        handlep = &handle;
-
-        if (hlen < sizeof(handlep->ha_fsid) || hlen > sizeof(*handlep))
-                return XFS_ERROR(EINVAL);
-        if (copy_from_user(handlep, hanp, hlen))
-                return XFS_ERROR(EFAULT);
-        if (hlen < sizeof(*handlep))
-                memset(((char *)handlep) + hlen, 0, sizeof(*handlep) - hlen);
-        if (hlen > sizeof(handlep->ha_fsid)) {
-                if (handlep->ha_fid.fid_len !=
-                    (hlen - sizeof(handlep->ha_fsid) -
-                            sizeof(handlep->ha_fid.fid_len)) ||
-                    handlep->ha_fid.fid_pad)
-                        return XFS_ERROR(EINVAL);
-        }
-
-        /*
-         * Crack the handle, obtain the inode # & generation #
-         */
-        xfid = (struct xfs_fid *)&handlep->ha_fid;
-        if (xfid->fid_len == sizeof(*xfid) - sizeof(xfid->fid_len)) {
-                ino  = xfid->fid_ino;
-                igen = xfid->fid_gen;
-        } else {
-                return XFS_ERROR(EINVAL);
-        }
-
-        /*
-         * Get the XFS inode, building a Linux inode to go with it.
-         */
-        error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0);
-        if (error)
-                return error;
-        if (ip == NULL)
-                return XFS_ERROR(EIO);
-        if (ip->i_d.di_gen != igen) {
-                xfs_iput_new(ip, XFS_ILOCK_SHARED);
-                return XFS_ERROR(ENOENT);
-        }
-
-        xfs_iunlock(ip, XFS_ILOCK_SHARED);
-
-        *inode = VFS_I(ip);
-        return 0;
+        return xfs_handle_to_dentry(parfilp,
+                        compat_ptr(hreq->ihandle), hreq->ihandlen);
 }
 
 STATIC int
 xfs_compat_attrlist_by_handle(
-        xfs_mount_t             *mp,
-        void                    __user *arg,
-        struct inode            *parinode)
+        struct file             *parfilp,
+        void                    __user *arg)
 {
         int                     error;
         attrlist_cursor_kern_t  *cursor;
         compat_xfs_fsop_attrlist_handlereq_t al_hreq;
-        struct inode            *inode;
+        struct dentry           *dentry;
         char                    *kbuf;
 
         if (!capable(CAP_SYS_ADMIN))
@@ -446,17 +375,17 @@ xfs_compat_attrlist_by_handle(
         if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE))
                 return -XFS_ERROR(EINVAL);
 
-        error = xfs_vget_fsop_handlereq_compat(mp, parinode, &al_hreq.hreq,
-                                               &inode);
-        if (error)
-                goto out;
+        dentry = xfs_compat_handlereq_to_dentry(parfilp, &al_hreq.hreq);
+        if (IS_ERR(dentry))
+                return PTR_ERR(dentry);
 
+        error = -ENOMEM;
         kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL);
         if (!kbuf)
-                goto out_vn_rele;
+                goto out_dput;
 
         cursor = (attrlist_cursor_kern_t *)&al_hreq.pos;
-        error = xfs_attr_list(XFS_I(inode), kbuf, al_hreq.buflen,
+        error = -xfs_attr_list(XFS_I(dentry->d_inode), kbuf, al_hreq.buflen,
                                         al_hreq.flags, cursor);
         if (error)
                 goto out_kfree;
@@ -466,22 +395,20 @@ xfs_compat_attrlist_by_handle(
 
  out_kfree:
         kfree(kbuf);
- out_vn_rele:
-        iput(inode);
- out:
-        return -error;
+ out_dput:
+        dput(dentry);
+        return error;
 }
 
 STATIC int
 xfs_compat_attrmulti_by_handle(
-        xfs_mount_t                             *mp,
-        void                                    __user *arg,
-        struct inode                            *parinode)
+        struct file                             *parfilp,
+        void                                    __user *arg)
 {
         int                                     error;
         compat_xfs_attr_multiop_t               *ops;
         compat_xfs_fsop_attrmulti_handlereq_t   am_hreq;
-        struct inode                            *inode;
+        struct dentry                           *dentry;
         unsigned int                            i, size;
         char                                    *attr_name;
 
@@ -491,20 +418,19 @@ xfs_compat_attrmulti_by_handle(
                            sizeof(compat_xfs_fsop_attrmulti_handlereq_t)))
                 return -XFS_ERROR(EFAULT);
 
-        error = xfs_vget_fsop_handlereq_compat(mp, parinode, &am_hreq.hreq,
-                                               &inode);
-        if (error)
-                goto out;
+        dentry = xfs_compat_handlereq_to_dentry(parfilp, &am_hreq.hreq);
+        if (IS_ERR(dentry))
+                return PTR_ERR(dentry);
 
         error = E2BIG;
         size = am_hreq.opcount * sizeof(compat_xfs_attr_multiop_t);
         if (!size || size > 16 * PAGE_SIZE)
-                goto out_vn_rele;
+                goto out_dput;
 
         error = ENOMEM;
         ops = kmalloc(size, GFP_KERNEL);
         if (!ops)
-                goto out_vn_rele;
+                goto out_dput;
 
         error = EFAULT;
         if (copy_from_user(ops, compat_ptr(am_hreq.ops), size))
@@ -527,20 +453,29 @@ xfs_compat_attrmulti_by_handle(
 
                 switch (ops[i].am_opcode) {
                 case ATTR_OP_GET:
-                        ops[i].am_error = xfs_attrmulti_attr_get(inode,
-                                        attr_name,
+                        ops[i].am_error = xfs_attrmulti_attr_get(
+                                        dentry->d_inode, attr_name,
                                         compat_ptr(ops[i].am_attrvalue),
                                         &ops[i].am_length, ops[i].am_flags);
                         break;
                 case ATTR_OP_SET:
-                        ops[i].am_error = xfs_attrmulti_attr_set(inode,
-                                        attr_name,
+                        ops[i].am_error = mnt_want_write(parfilp->f_path.mnt);
+                        if (ops[i].am_error)
+                                break;
+                        ops[i].am_error = xfs_attrmulti_attr_set(
+                                        dentry->d_inode, attr_name,
                                         compat_ptr(ops[i].am_attrvalue),
                                         ops[i].am_length, ops[i].am_flags);
+                        mnt_drop_write(parfilp->f_path.mnt);
                         break;
                 case ATTR_OP_REMOVE:
-                        ops[i].am_error = xfs_attrmulti_attr_remove(inode,
-                                        attr_name, ops[i].am_flags);
+                        ops[i].am_error = mnt_want_write(parfilp->f_path.mnt);
+                        if (ops[i].am_error)
+                                break;
+                        ops[i].am_error = xfs_attrmulti_attr_remove(
+                                        dentry->d_inode, attr_name,
+                                        ops[i].am_flags);
+                        mnt_drop_write(parfilp->f_path.mnt);
                         break;
                 default:
                         ops[i].am_error = EINVAL;
@@ -553,22 +488,20 @@ xfs_compat_attrmulti_by_handle(
         kfree(attr_name);
  out_kfree_ops:
         kfree(ops);
- out_vn_rele:
-        iput(inode);
- out:
+ out_dput:
+        dput(dentry);
         return -error;
 }
 
 STATIC int
 xfs_compat_fssetdm_by_handle(
-        xfs_mount_t             *mp,
-        void                    __user *arg,
-        struct inode            *parinode)
+        struct file             *parfilp,
+        void                    __user *arg)
 {
         int                     error;
         struct fsdmidata        fsd;
         compat_xfs_fsop_setdm_handlereq_t dmhreq;
-        struct inode            *inode;
+        struct dentry           *dentry;
 
         if (!capable(CAP_MKNOD))
                 return -XFS_ERROR(EPERM);
@@ -576,12 +509,11 @@ xfs_compat_fssetdm_by_handle(
                            sizeof(compat_xfs_fsop_setdm_handlereq_t)))
                 return -XFS_ERROR(EFAULT);
 
-        error = xfs_vget_fsop_handlereq_compat(mp, parinode, &dmhreq.hreq,
-                                               &inode);
-        if (error)
-                return -error;
+        dentry = xfs_compat_handlereq_to_dentry(parfilp, &dmhreq.hreq);
+        if (IS_ERR(dentry))
+                return PTR_ERR(dentry);
 
-        if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) {
+        if (IS_IMMUTABLE(dentry->d_inode) || IS_APPEND(dentry->d_inode)) {
                 error = -XFS_ERROR(EPERM);
                 goto out;
         }
@@ -591,11 +523,11 @@ xfs_compat_fssetdm_by_handle(
                 goto out;
         }
 
-        error = -xfs_set_dmattrs(XFS_I(inode), fsd.fsd_dmevmask,
+        error = -xfs_set_dmattrs(XFS_I(dentry->d_inode), fsd.fsd_dmevmask,
                                  fsd.fsd_dmstate);
 
 out:
-        iput(inode);
+        dput(dentry);
         return error;
 }
 
@@ -722,21 +654,21 @@ xfs_file_compat_ioctl(
 
                 if (xfs_compat_handlereq_copyin(&hreq, arg))
                         return -XFS_ERROR(EFAULT);
-                return xfs_open_by_handle(mp, &hreq, filp, inode);
+                return xfs_open_by_handle(filp, &hreq);
         }
         case XFS_IOC_READLINK_BY_HANDLE_32: {
                 struct xfs_fsop_handlereq       hreq;
 
                 if (xfs_compat_handlereq_copyin(&hreq, arg))
                         return -XFS_ERROR(EFAULT);
-                return xfs_readlink_by_handle(mp, &hreq, inode);
+                return xfs_readlink_by_handle(filp, &hreq);
         }
         case XFS_IOC_ATTRLIST_BY_HANDLE_32:
-                return xfs_compat_attrlist_by_handle(mp, arg, inode);
+                return xfs_compat_attrlist_by_handle(filp, arg);
         case XFS_IOC_ATTRMULTI_BY_HANDLE_32:
-                return xfs_compat_attrmulti_by_handle(mp, arg, inode);
+                return xfs_compat_attrmulti_by_handle(filp, arg);
         case XFS_IOC_FSSETDM_BY_HANDLE_32:
-                return xfs_compat_fssetdm_by_handle(mp, arg, inode);
+                return xfs_compat_fssetdm_by_handle(filp, arg);
         default:
                 return -XFS_ERROR(ENOIOCTLCMD);
         }
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 95a971080368..c71e226da7f5 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -1197,6 +1197,7 @@ xfs_fs_remount(
         struct xfs_mount        *mp = XFS_M(sb);
         substring_t             args[MAX_OPT_ARGS];
         char                    *p;
+        int                     error;
 
         while ((p = strsep(&options, ",")) != NULL) {
                 int token;
@@ -1247,11 +1248,25 @@ xfs_fs_remount(
                 }
         }
 
-        /* rw/ro -> rw */
+        /* ro -> rw */
         if ((mp->m_flags & XFS_MOUNT_RDONLY) && !(*flags & MS_RDONLY)) {
                 mp->m_flags &= ~XFS_MOUNT_RDONLY;
                 if (mp->m_flags & XFS_MOUNT_BARRIER)
                         xfs_mountfs_check_barriers(mp);
+
+                /*
+                 * If this is the first remount to writeable state we
+                 * might have some superblock changes to update.
+                 */
+                if (mp->m_update_flags) {
+                        error = xfs_mount_log_sb(mp, mp->m_update_flags);
+                        if (error) {
+                                cmn_err(CE_WARN,
+                                        "XFS: failed to write sb changes");
+                                return error;
+                        }
+                        mp->m_update_flags = 0;
+                }
         }
 
         /* rw -> ro */
diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c
index 591ca6602bfb..6543c0b29753 100644
--- a/fs/xfs/quota/xfs_dquot.c
+++ b/fs/xfs/quota/xfs_dquot.c
@@ -73,6 +73,8 @@ int xfs_dqreq_num;
 int xfs_dqerror_mod = 33;
 #endif
 
+static struct lock_class_key xfs_dquot_other_class;
+
 /*
  * Allocate and initialize a dquot. We don't always allocate fresh memory;
  * we try to reclaim a free dquot if the number of incore dquots are above
@@ -139,7 +141,15 @@ xfs_qm_dqinit(
                  ASSERT(dqp->q_trace);
                  xfs_dqtrace_entry(dqp, "DQRECLAIMED_INIT");
 #endif
-         }
+        }
+
+        /*
+         * In either case we need to make sure group quotas have a different
+         * lock class than user quotas, to make sure lockdep knows we can
+         * locks of one of each at the same time.
+         */
+        if (!(type & XFS_DQ_USER))
+                lockdep_set_class(&dqp->q_qlock, &xfs_dquot_other_class);
 
         /*
          * log item gets initialized later
@@ -421,7 +431,7 @@ xfs_qm_dqalloc(
         /*
          * Initialize the bmap freelist prior to calling bmapi code.
          */
-        XFS_BMAP_INIT(&flist, &firstblock);
+        xfs_bmap_init(&flist, &firstblock);
         xfs_ilock(quotip, XFS_ILOCK_EXCL);
         /*
          * Return if this type of quotas is turned off while we didn't
@@ -1383,6 +1393,12 @@ xfs_dqunlock_nonotify(
         mutex_unlock(&(dqp->q_qlock));
 }
 
+/*
+ * Lock two xfs_dquot structures.
+ *
+ * To avoid deadlocks we always lock the quota structure with
+ * the lowerd id first.
+ */
 void
 xfs_dqlock2(
         xfs_dquot_t     *d1,
@@ -1392,18 +1408,16 @@ xfs_dqlock2(
                 ASSERT(d1 != d2);
                 if (be32_to_cpu(d1->q_core.d_id) >
                     be32_to_cpu(d2->q_core.d_id)) {
-                        xfs_dqlock(d2);
-                        xfs_dqlock(d1);
+                        mutex_lock(&d2->q_qlock);
+                        mutex_lock_nested(&d1->q_qlock, XFS_QLOCK_NESTED);
                 } else {
-                        xfs_dqlock(d1);
-                        xfs_dqlock(d2);
-                }
-        } else {
-                if (d1) {
-                        xfs_dqlock(d1);
-                } else if (d2) {
-                        xfs_dqlock(d2);
+                        mutex_lock(&d1->q_qlock);
+                        mutex_lock_nested(&d2->q_qlock, XFS_QLOCK_NESTED);
                 }
+        } else if (d1) {
+                mutex_lock(&d1->q_qlock);
+        } else if (d2) {
+                mutex_lock(&d2->q_qlock);
         }
 }
 
diff --git a/fs/xfs/quota/xfs_dquot.h b/fs/xfs/quota/xfs_dquot.h
index 7e455337e2ba..d443e93b4331 100644
--- a/fs/xfs/quota/xfs_dquot.h
+++ b/fs/xfs/quota/xfs_dquot.h
@@ -97,6 +97,16 @@ typedef struct xfs_dquot {
 #define dq_hashlist     q_lists.dqm_hashlist
 #define dq_flags        q_lists.dqm_flags
 
+/*
+ * Lock hierachy for q_qlock:
+ *      XFS_QLOCK_NORMAL is the implicit default,
+ *      XFS_QLOCK_NESTED is the dquot with the higher id in xfs_dqlock2
+ */
+enum {
+        XFS_QLOCK_NORMAL = 0,
+        XFS_QLOCK_NESTED,
+};
+
 #define XFS_DQHOLD(dqp)         ((dqp)->q_nrefs++)
 
 #ifdef DEBUG
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index 6b13960cf318..7a2beb64314f 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -1070,6 +1070,13 @@ xfs_qm_sync(
         return 0;
 }
 
+/*
+ * The hash chains and the mplist use the same xfs_dqhash structure as
+ * their list head, but we can take the mplist qh_lock and one of the
+ * hash qh_locks at the same time without any problem as they aren't
+ * related.
+ */
+static struct lock_class_key xfs_quota_mplist_class;
 
 /*
  * This initializes all the quota information that's kept in the
@@ -1105,6 +1112,8 @@ xfs_qm_init_quotainfo(
         }
 
         xfs_qm_list_init(&qinf->qi_dqlist, "mpdqlist", 0);
+        lockdep_set_class(&qinf->qi_dqlist.qh_lock, &xfs_quota_mplist_class);
+
         qinf->qi_dqreclaims = 0;
 
         /* mutex used to serialize quotaoffs */
diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h
index d3b3cf742999..143d63ecb20a 100644
--- a/fs/xfs/xfs_ag.h
+++ b/fs/xfs/xfs_ag.h
@@ -244,8 +244,8 @@ typedef struct xfs_perag
 #define XFS_AG_CHECK_DADDR(mp,d,len)    \
         ((len) == 1 ? \
             ASSERT((d) == XFS_SB_DADDR || \
-                   XFS_DADDR_TO_AGBNO(mp, d) != XFS_SB_DADDR) : \
-            ASSERT(XFS_DADDR_TO_AGNO(mp, d) == \
-                   XFS_DADDR_TO_AGNO(mp, (d) + (len) - 1)))
+                   xfs_daddr_to_agbno(mp, d) != XFS_SB_DADDR) : \
+            ASSERT(xfs_daddr_to_agno(mp, d) == \
+                   xfs_daddr_to_agno(mp, (d) + (len) - 1)))
 
 #endif  /* __XFS_AG_H__ */
diff --git a/fs/xfs/xfs_alloc_btree.c b/fs/xfs/xfs_alloc_btree.c
index 733cb75a8c5d..c10c3a292d30 100644
--- a/fs/xfs/xfs_alloc_btree.c
+++ b/fs/xfs/xfs_alloc_btree.c
@@ -115,7 +115,7 @@ xfs_allocbt_free_block(
         xfs_agblock_t           bno;
         int                     error;
 
-        bno = XFS_DADDR_TO_AGBNO(cur->bc_mp, XFS_BUF_ADDR(bp));
+        bno = xfs_daddr_to_agbno(cur->bc_mp, XFS_BUF_ADDR(bp));
         error = xfs_alloc_put_freelist(cur->bc_tp, agbp, NULL, bno, 1);
         if (error)
                 return error;
diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c
index f7cdc28aff41..5fde1654b430 100644
--- a/fs/xfs/xfs_attr.c
+++ b/fs/xfs/xfs_attr.c
@@ -374,7 +374,7 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name,
                  * It won't fit in the shortform, transform to a leaf block.
                  * GROT: another possible req'mt for a double-split btree op.
                  */
-                XFS_BMAP_INIT(args.flist, args.firstblock);
+                xfs_bmap_init(args.flist, args.firstblock);
                 error = xfs_attr_shortform_to_leaf(&args);
                 if (!error) {
                         error = xfs_bmap_finish(&args.trans, args.flist,
@@ -956,7 +956,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args)
                  * Commit that transaction so that the node_addname() call
                  * can manage its own transactions.
                  */
-                XFS_BMAP_INIT(args->flist, args->firstblock);
+                xfs_bmap_init(args->flist, args->firstblock);
                 error = xfs_attr_leaf_to_node(args);
                 if (!error) {
                         error = xfs_bmap_finish(&args->trans, args->flist,
@@ -1057,7 +1057,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args)
                  * If the result is small enough, shrink it all into the inode.
                  */
                 if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) {
-                        XFS_BMAP_INIT(args->flist, args->firstblock);
+                        xfs_bmap_init(args->flist, args->firstblock);
                         error = xfs_attr_leaf_to_shortform(bp, args, forkoff);
                         /* bp is gone due to xfs_da_shrink_inode */
                         if (!error) {
@@ -1135,7 +1135,7 @@ xfs_attr_leaf_removename(xfs_da_args_t *args)
          * If the result is small enough, shrink it all into the inode.
          */
         if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) {
-                XFS_BMAP_INIT(args->flist, args->firstblock);
+                xfs_bmap_init(args->flist, args->firstblock);
                 error = xfs_attr_leaf_to_shortform(bp, args, forkoff);
                 /* bp is gone due to xfs_da_shrink_inode */
                 if (!error) {
@@ -1290,7 +1290,7 @@ restart:
                          * have been a b-tree.
                          */
                         xfs_da_state_free(state);
-                        XFS_BMAP_INIT(args->flist, args->firstblock);
+                        xfs_bmap_init(args->flist, args->firstblock);
                         error = xfs_attr_leaf_to_node(args);
                         if (!error) {
                                 error = xfs_bmap_finish(&args->trans,
@@ -1331,7 +1331,7 @@ restart:
                  * in the index/blkno/rmtblkno/rmtblkcnt fields and
                  * in the index2/blkno2/rmtblkno2/rmtblkcnt2 fields.
                  */
-                XFS_BMAP_INIT(args->flist, args->firstblock);
+                xfs_bmap_init(args->flist, args->firstblock);
                 error = xfs_da_split(state);
                 if (!error) {
                         error = xfs_bmap_finish(&args->trans, args->flist,
@@ -1443,7 +1443,7 @@ restart:
                  * Check to see if the tree needs to be collapsed.
                  */
                 if (retval && (state->path.active > 1)) {
-                        XFS_BMAP_INIT(args->flist, args->firstblock);
+                        xfs_bmap_init(args->flist, args->firstblock);
                         error = xfs_da_join(state);
                         if (!error) {
                                 error = xfs_bmap_finish(&args->trans,
@@ -1579,7 +1579,7 @@ xfs_attr_node_removename(xfs_da_args_t *args)
          * Check to see if the tree needs to be collapsed.
          */
         if (retval && (state->path.active > 1)) {
-                XFS_BMAP_INIT(args->flist, args->firstblock);
+                xfs_bmap_init(args->flist, args->firstblock);
                 error = xfs_da_join(state);
                 if (!error) {
                         error = xfs_bmap_finish(&args->trans, args->flist,
@@ -1630,7 +1630,7 @@ xfs_attr_node_removename(xfs_da_args_t *args)
                                                        == XFS_ATTR_LEAF_MAGIC);
 
                 if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) {
-                        XFS_BMAP_INIT(args->flist, args->firstblock);
+                        xfs_bmap_init(args->flist, args->firstblock);
                         error = xfs_attr_leaf_to_shortform(bp, args, forkoff);
                         /* bp is gone due to xfs_da_shrink_inode */
                         if (!error) {
@@ -2069,7 +2069,7 @@ xfs_attr_rmtval_set(xfs_da_args_t *args)
                 /*
                  * Allocate a single extent, up to the size of the value.
                  */
-                XFS_BMAP_INIT(args->flist, args->firstblock);
+                xfs_bmap_init(args->flist, args->firstblock);
                 nmap = 1;
                 error = xfs_bmapi(args->trans, dp, (xfs_fileoff_t)lblkno,
                                   blkcnt,
@@ -2123,7 +2123,7 @@ xfs_attr_rmtval_set(xfs_da_args_t *args)
                 /*
                  * Try to remember where we decided to put the value.
                  */
-                XFS_BMAP_INIT(args->flist, args->firstblock);
+                xfs_bmap_init(args->flist, args->firstblock);
                 nmap = 1;
                 error = xfs_bmapi(NULL, dp, (xfs_fileoff_t)lblkno,
                                   args->rmtblkcnt,
@@ -2188,7 +2188,7 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args)
                 /*
                  * Try to remember where we decided to put the value.
                  */
-                XFS_BMAP_INIT(args->flist, args->firstblock);
+                xfs_bmap_init(args->flist, args->firstblock);
                 nmap = 1;
                 error = xfs_bmapi(NULL, args->dp, (xfs_fileoff_t)lblkno,
                                         args->rmtblkcnt,
@@ -2229,7 +2229,7 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args)
         blkcnt = args->rmtblkcnt;
         done = 0;
         while (!done) {
-                XFS_BMAP_INIT(args->flist, args->firstblock);
+                xfs_bmap_init(args->flist, args->firstblock);
                 error = xfs_bunmapi(args->trans, args->dp, lblkno, blkcnt,
                                     XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
                                     1, args->firstblock, args->flist,
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 138308e70d14..c852cd65aaea 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -595,9 +595,9 @@ xfs_bmap_add_extent(
                 xfs_iext_insert(ifp, 0, 1, new);
                 ASSERT(cur == NULL);
                 ifp->if_lastex = 0;
-                if (!ISNULLSTARTBLOCK(new->br_startblock)) {
+                if (!isnullstartblock(new->br_startblock)) {
                         XFS_IFORK_NEXT_SET(ip, whichfork, 1);
-                        logflags = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork);
+                        logflags = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
                 } else
                         logflags = 0;
                 /* DELTA: single new extent */
@@ -613,7 +613,7 @@ xfs_bmap_add_extent(
         /*
          * Any kind of new delayed allocation goes here.
          */
-        else if (ISNULLSTARTBLOCK(new->br_startblock)) {
+        else if (isnullstartblock(new->br_startblock)) {
                 if (cur)
                         ASSERT((cur->bc_private.b.flags &
                                 XFS_BTCUR_BPRV_WASDEL) == 0);
@@ -644,11 +644,11 @@ xfs_bmap_add_extent(
                  * in a delayed or unwritten allocation with a real one, or
                  * converting real back to unwritten.
                  */
-                if (!ISNULLSTARTBLOCK(new->br_startblock) &&
+                if (!isnullstartblock(new->br_startblock) &&
                     new->br_startoff + new->br_blockcount > prev.br_startoff) {
                         if (prev.br_state != XFS_EXT_UNWRITTEN &&
-                            ISNULLSTARTBLOCK(prev.br_startblock)) {
-                                da_old = STARTBLOCKVAL(prev.br_startblock);
+                            isnullstartblock(prev.br_startblock)) {
+                                da_old = startblockval(prev.br_startblock);
                                 if (cur)
                                         ASSERT(cur->bc_private.b.flags &
                                                 XFS_BTCUR_BPRV_WASDEL);
@@ -803,7 +803,7 @@ xfs_bmap_add_extent_delay_real(
          */
         if (STATE_SET_TEST(LEFT_VALID, idx > 0)) {
                 xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &LEFT);
-                STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(LEFT.br_startblock));
+                STATE_SET(LEFT_DELAY, isnullstartblock(LEFT.br_startblock));
         }
         STATE_SET(LEFT_CONTIG,
                 STATE_TEST(LEFT_VALID) && !STATE_TEST(LEFT_DELAY) &&
@@ -820,7 +820,7 @@ xfs_bmap_add_extent_delay_real(
                         idx <
                         ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t) - 1)) {
                 xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx + 1), &RIGHT);
-                STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(RIGHT.br_startblock));
+                STATE_SET(RIGHT_DELAY, isnullstartblock(RIGHT.br_startblock));
         }
         STATE_SET(RIGHT_CONTIG,
                 STATE_TEST(RIGHT_VALID) && !STATE_TEST(RIGHT_DELAY) &&
@@ -1019,8 +1019,8 @@ xfs_bmap_add_extent_delay_real(
                                 goto done;
                 }
                 temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
-                        STARTBLOCKVAL(PREV.br_startblock));
-                xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+                        startblockval(PREV.br_startblock));
+                xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
                 XFS_BMAP_TRACE_POST_UPDATE("LF|LC", ip, idx, XFS_DATA_FORK);
                 *dnew = temp;
                 /* DELTA: The boundary between two in-core extents moved. */
@@ -1067,10 +1067,10 @@ xfs_bmap_add_extent_delay_real(
                                 goto done;
                 }
                 temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
-                        STARTBLOCKVAL(PREV.br_startblock) -
+                        startblockval(PREV.br_startblock) -
                         (cur ? cur->bc_private.b.allocated : 0));
                 ep = xfs_iext_get_ext(ifp, idx + 1);
-                xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+                xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
                 XFS_BMAP_TRACE_POST_UPDATE("LF", ip, idx + 1, XFS_DATA_FORK);
                 *dnew = temp;
                 /* DELTA: One in-core extent is split in two. */
@@ -1110,8 +1110,8 @@ xfs_bmap_add_extent_delay_real(
                                 goto done;
                 }
                 temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
-                        STARTBLOCKVAL(PREV.br_startblock));
-                xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+                        startblockval(PREV.br_startblock));
+                xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
                 XFS_BMAP_TRACE_POST_UPDATE("RF|RC", ip, idx, XFS_DATA_FORK);
                 *dnew = temp;
                 /* DELTA: The boundary between two in-core extents moved. */
@@ -1157,10 +1157,10 @@ xfs_bmap_add_extent_delay_real(
                                 goto done;
                 }
                 temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
-                        STARTBLOCKVAL(PREV.br_startblock) -
+                        startblockval(PREV.br_startblock) -
                         (cur ? cur->bc_private.b.allocated : 0));
                 ep = xfs_iext_get_ext(ifp, idx);
-                xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+                xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
                 XFS_BMAP_TRACE_POST_UPDATE("RF", ip, idx, XFS_DATA_FORK);
                 *dnew = temp;
                 /* DELTA: One in-core extent is split in two. */
@@ -1213,7 +1213,7 @@ xfs_bmap_add_extent_delay_real(
                 }
                 temp = xfs_bmap_worst_indlen(ip, temp);
                 temp2 = xfs_bmap_worst_indlen(ip, temp2);
-                diff = (int)(temp + temp2 - STARTBLOCKVAL(PREV.br_startblock) -
+                diff = (int)(temp + temp2 - startblockval(PREV.br_startblock) -
                         (cur ? cur->bc_private.b.allocated : 0));
                 if (diff > 0 &&
                     xfs_mod_incore_sb(ip->i_mount, XFS_SBS_FDBLOCKS, -((int64_t)diff), rsvd)) {
@@ -1241,11 +1241,11 @@ xfs_bmap_add_extent_delay_real(
                         }
                 }
                 ep = xfs_iext_get_ext(ifp, idx);
-                xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+                xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
                 XFS_BMAP_TRACE_POST_UPDATE("0", ip, idx, XFS_DATA_FORK);
                 XFS_BMAP_TRACE_PRE_UPDATE("0", ip, idx + 2, XFS_DATA_FORK);
                 xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx + 2),
-                        NULLSTARTBLOCK((int)temp2));
+                        nullstartblock((int)temp2));
                 XFS_BMAP_TRACE_POST_UPDATE("0", ip, idx + 2, XFS_DATA_FORK);
                 *dnew = temp + temp2;
                 /* DELTA: One in-core extent is split in three. */
@@ -1365,7 +1365,7 @@ xfs_bmap_add_extent_unwritten_real(
          */
         if (STATE_SET_TEST(LEFT_VALID, idx > 0)) {
                 xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &LEFT);
-                STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(LEFT.br_startblock));
+                STATE_SET(LEFT_DELAY, isnullstartblock(LEFT.br_startblock));
         }
         STATE_SET(LEFT_CONTIG,
                 STATE_TEST(LEFT_VALID) && !STATE_TEST(LEFT_DELAY) &&
@@ -1382,7 +1382,7 @@ xfs_bmap_add_extent_unwritten_real(
                         idx <
                         ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t) - 1)) {
                 xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx + 1), &RIGHT);
-                STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(RIGHT.br_startblock));
+                STATE_SET(RIGHT_DELAY, isnullstartblock(RIGHT.br_startblock));
         }
         STATE_SET(RIGHT_CONTIG,
                 STATE_TEST(RIGHT_VALID) && !STATE_TEST(RIGHT_DELAY) &&
@@ -1889,13 +1889,13 @@ xfs_bmap_add_extent_hole_delay(
         ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
         ep = xfs_iext_get_ext(ifp, idx);
         state = 0;
-        ASSERT(ISNULLSTARTBLOCK(new->br_startblock));
+        ASSERT(isnullstartblock(new->br_startblock));
         /*
          * Check and set flags if this segment has a left neighbor
          */
         if (STATE_SET_TEST(LEFT_VALID, idx > 0)) {
                 xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &left);
-                STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(left.br_startblock));
+                STATE_SET(LEFT_DELAY, isnullstartblock(left.br_startblock));
         }
         /*
          * Check and set flags if the current (right) segment exists.
@@ -1905,7 +1905,7 @@ xfs_bmap_add_extent_hole_delay(
                            idx <
                            ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t))) {
                 xfs_bmbt_get_all(ep, &right);
-                STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(right.br_startblock));
+                STATE_SET(RIGHT_DELAY, isnullstartblock(right.br_startblock));
         }
         /*
          * Set contiguity flags on the left and right neighbors.
@@ -1938,12 +1938,12 @@ xfs_bmap_add_extent_hole_delay(
                 XFS_BMAP_TRACE_PRE_UPDATE("LC|RC", ip, idx - 1,
                         XFS_DATA_FORK);
                 xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, idx - 1), temp);
-                oldlen = STARTBLOCKVAL(left.br_startblock) +
-                        STARTBLOCKVAL(new->br_startblock) +
-                        STARTBLOCKVAL(right.br_startblock);
+                oldlen = startblockval(left.br_startblock) +
+                        startblockval(new->br_startblock) +
+                        startblockval(right.br_startblock);
                 newlen = xfs_bmap_worst_indlen(ip, temp);
                 xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx - 1),
-                        NULLSTARTBLOCK((int)newlen));
+                        nullstartblock((int)newlen));
                 XFS_BMAP_TRACE_POST_UPDATE("LC|RC", ip, idx - 1,
                         XFS_DATA_FORK);
                 XFS_BMAP_TRACE_DELETE("LC|RC", ip, idx, 1, XFS_DATA_FORK);
@@ -1964,11 +1964,11 @@ xfs_bmap_add_extent_hole_delay(
                 XFS_BMAP_TRACE_PRE_UPDATE("LC", ip, idx - 1,
                         XFS_DATA_FORK);
                 xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, idx - 1), temp);
-                oldlen = STARTBLOCKVAL(left.br_startblock) +
-                        STARTBLOCKVAL(new->br_startblock);
+                oldlen = startblockval(left.br_startblock) +
+                        startblockval(new->br_startblock);
                 newlen = xfs_bmap_worst_indlen(ip, temp);
                 xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx - 1),
-                        NULLSTARTBLOCK((int)newlen));
+                        nullstartblock((int)newlen));
                 XFS_BMAP_TRACE_POST_UPDATE("LC", ip, idx - 1,
                         XFS_DATA_FORK);
                 ip->i_df.if_lastex = idx - 1;
@@ -1985,11 +1985,11 @@ xfs_bmap_add_extent_hole_delay(
                  */
                 XFS_BMAP_TRACE_PRE_UPDATE("RC", ip, idx, XFS_DATA_FORK);
                 temp = new->br_blockcount + right.br_blockcount;
-                oldlen = STARTBLOCKVAL(new->br_startblock) +
-                        STARTBLOCKVAL(right.br_startblock);
+                oldlen = startblockval(new->br_startblock) +
+                        startblockval(right.br_startblock);
                 newlen = xfs_bmap_worst_indlen(ip, temp);
                 xfs_bmbt_set_allf(ep, new->br_startoff,
-                        NULLSTARTBLOCK((int)newlen), temp, right.br_state);
+                        nullstartblock((int)newlen), temp, right.br_state);
                 XFS_BMAP_TRACE_POST_UPDATE("RC", ip, idx, XFS_DATA_FORK);
                 ip->i_df.if_lastex = idx;
                 /* DELTA: One in-core extent grew into a hole. */
@@ -2085,7 +2085,7 @@ xfs_bmap_add_extent_hole_real(
          */
         if (STATE_SET_TEST(LEFT_VALID, idx > 0)) {
                 xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &left);
-                STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(left.br_startblock));
+                STATE_SET(LEFT_DELAY, isnullstartblock(left.br_startblock));
         }
         /*
          * Check and set flags if this segment has a current value.
@@ -2095,7 +2095,7 @@ xfs_bmap_add_extent_hole_real(
                            idx <
                            ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t))) {
                 xfs_bmbt_get_all(ep, &right);
-                STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(right.br_startblock));
+                STATE_SET(RIGHT_DELAY, isnullstartblock(right.br_startblock));
         }
         /*
          * We're inserting a real allocation between "left" and "right".
@@ -2143,7 +2143,7 @@ xfs_bmap_add_extent_hole_real(
                 XFS_IFORK_NEXT_SET(ip, whichfork,
                         XFS_IFORK_NEXTENTS(ip, whichfork) - 1);
                 if (cur == NULL) {
-                        rval = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork);
+                        rval = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
                 } else {
                         rval = XFS_ILOG_CORE;
                         if ((error = xfs_bmbt_lookup_eq(cur,
@@ -2185,7 +2185,7 @@ xfs_bmap_add_extent_hole_real(
                 XFS_BMAP_TRACE_POST_UPDATE("LC", ip, idx - 1, whichfork);
                 ifp->if_lastex = idx - 1;
                 if (cur == NULL) {
-                        rval = XFS_ILOG_FEXT(whichfork);
+                        rval = xfs_ilog_fext(whichfork);
                 } else {
                         rval = 0;
                         if ((error = xfs_bmbt_lookup_eq(cur,
@@ -2220,7 +2220,7 @@ xfs_bmap_add_extent_hole_real(
                 XFS_BMAP_TRACE_POST_UPDATE("RC", ip, idx, whichfork);
                 ifp->if_lastex = idx;
                 if (cur == NULL) {
-                        rval = XFS_ILOG_FEXT(whichfork);
+                        rval = xfs_ilog_fext(whichfork);
                 } else {
                         rval = 0;
                         if ((error = xfs_bmbt_lookup_eq(cur,
@@ -2254,7 +2254,7 @@ xfs_bmap_add_extent_hole_real(
                 XFS_IFORK_NEXT_SET(ip, whichfork,
                         XFS_IFORK_NEXTENTS(ip, whichfork) + 1);
                 if (cur == NULL) {
-                        rval = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork);
+                        rval = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
                 } else {
                         rval = XFS_ILOG_CORE;
                         if ((error = xfs_bmbt_lookup_eq(cur,
@@ -2482,7 +2482,7 @@ xfs_bmap_adjacent(
          * try to use it's last block as our starting point.
          */
         if (ap->eof && ap->prevp->br_startoff != NULLFILEOFF &&
-            !ISNULLSTARTBLOCK(ap->prevp->br_startblock) &&
+            !isnullstartblock(ap->prevp->br_startblock) &&
             ISVALID(ap->prevp->br_startblock + ap->prevp->br_blockcount,
                     ap->prevp->br_startblock)) {
                 ap->rval = ap->prevp->br_startblock + ap->prevp->br_blockcount;
@@ -2511,7 +2511,7 @@ xfs_bmap_adjacent(
                  * start block based on it.
                  */
                 if (ap->prevp->br_startoff != NULLFILEOFF &&
-                    !ISNULLSTARTBLOCK(ap->prevp->br_startblock) &&
+                    !isnullstartblock(ap->prevp->br_startblock) &&
                     (prevbno = ap->prevp->br_startblock +
                                ap->prevp->br_blockcount) &&
                     ISVALID(prevbno, ap->prevp->br_startblock)) {
@@ -2552,7 +2552,7 @@ xfs_bmap_adjacent(
                  * If there's a following (right) block, select a requested
                  * start block based on it.
                  */
-                if (!ISNULLSTARTBLOCK(ap->gotp->br_startblock)) {
+                if (!isnullstartblock(ap->gotp->br_startblock)) {
                         /*
                          * Calculate gap to start of next block.
                          */
@@ -3082,7 +3082,7 @@ xfs_bmap_btree_to_extents(
         ASSERT(ifp->if_broot == NULL);
         ASSERT((ifp->if_flags & XFS_IFBROOT) == 0);
         XFS_IFORK_FMT_SET(ip, whichfork, XFS_DINODE_FMT_EXTENTS);
-        *logflagsp = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork);
+        *logflagsp = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
         return 0;
 }
 
@@ -3136,8 +3136,8 @@ xfs_bmap_del_extent(
         del_endoff = del->br_startoff + del->br_blockcount;
         got_endoff = got.br_startoff + got.br_blockcount;
         ASSERT(got_endoff >= del_endoff);
-        delay = ISNULLSTARTBLOCK(got.br_startblock);
-        ASSERT(ISNULLSTARTBLOCK(del->br_startblock) == delay);
+        delay = isnullstartblock(got.br_startblock);
+        ASSERT(isnullstartblock(del->br_startblock) == delay);
         flags = 0;
         qfield = 0;
         error = 0;
@@ -3189,7 +3189,7 @@ xfs_bmap_del_extent(
                 }
                 da_old = da_new = 0;
         } else {
-                da_old = STARTBLOCKVAL(got.br_startblock);
+                da_old = startblockval(got.br_startblock);
                 da_new = 0;
                 nblks = 0;
                 do_fx = 0;
@@ -3213,7 +3213,7 @@ xfs_bmap_del_extent(
                         XFS_IFORK_NEXTENTS(ip, whichfork) - 1);
                 flags |= XFS_ILOG_CORE;
                 if (!cur) {
-                        flags |= XFS_ILOG_FEXT(whichfork);
+                        flags |= xfs_ilog_fext(whichfork);
                         break;
                 }
                 if ((error = xfs_btree_delete(cur, &i)))
@@ -3233,7 +3233,7 @@ xfs_bmap_del_extent(
                 if (delay) {
                         temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
                                 da_old);
-                        xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+                        xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
                         XFS_BMAP_TRACE_POST_UPDATE("2", ip, idx,
                                 whichfork);
                         da_new = temp;
@@ -3242,7 +3242,7 @@ xfs_bmap_del_extent(
                 xfs_bmbt_set_startblock(ep, del_endblock);
                 XFS_BMAP_TRACE_POST_UPDATE("2", ip, idx, whichfork);
                 if (!cur) {
-                        flags |= XFS_ILOG_FEXT(whichfork);
+                        flags |= xfs_ilog_fext(whichfork);
                         break;
                 }
                 if ((error = xfs_bmbt_update(cur, del_endoff, del_endblock,
@@ -3262,7 +3262,7 @@ xfs_bmap_del_extent(
                 if (delay) {
                         temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
                                 da_old);
-                        xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+                        xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
                         XFS_BMAP_TRACE_POST_UPDATE("1", ip, idx,
                                 whichfork);
                         da_new = temp;
@@ -3270,7 +3270,7 @@ xfs_bmap_del_extent(
                 }
                 XFS_BMAP_TRACE_POST_UPDATE("1", ip, idx, whichfork);
                 if (!cur) {
-                        flags |= XFS_ILOG_FEXT(whichfork);
+                        flags |= xfs_ilog_fext(whichfork);
                         break;
                 }
                 if ((error = xfs_bmbt_update(cur, got.br_startoff,
@@ -3345,22 +3345,22 @@ xfs_bmap_del_extent(
                                 }
                                 XFS_WANT_CORRUPTED_GOTO(i == 1, done);
                         } else
-                                flags |= XFS_ILOG_FEXT(whichfork);
+                                flags |= xfs_ilog_fext(whichfork);
                         XFS_IFORK_NEXT_SET(ip, whichfork,
                                 XFS_IFORK_NEXTENTS(ip, whichfork) + 1);
                 } else {
                         ASSERT(whichfork == XFS_DATA_FORK);
                         temp = xfs_bmap_worst_indlen(ip, temp);
-                        xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+                        xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
                         temp2 = xfs_bmap_worst_indlen(ip, temp2);
-                        new.br_startblock = NULLSTARTBLOCK((int)temp2);
+                        new.br_startblock = nullstartblock((int)temp2);
                         da_new = temp + temp2;
                         while (da_new > da_old) {
                                 if (temp) {
                                         temp--;
                                         da_new--;
                                         xfs_bmbt_set_startblock(ep,
-                                                NULLSTARTBLOCK((int)temp));
+                                                nullstartblock((int)temp));
                                 }
                                 if (da_new == da_old)
                                         break;
@@ -3368,7 +3368,7 @@ xfs_bmap_del_extent(
                                         temp2--;
                                         da_new--;
                                         new.br_startblock =
-                                                NULLSTARTBLOCK((int)temp2);
+                                                nullstartblock((int)temp2);
                                 }
                         }
                 }
@@ -3545,7 +3545,7 @@ xfs_bmap_extents_to_btree(
         nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t);
         for (cnt = i = 0; i < nextents; i++) {
                 ep = xfs_iext_get_ext(ifp, i);
-                if (!ISNULLSTARTBLOCK(xfs_bmbt_get_startblock(ep))) {
+                if (!isnullstartblock(xfs_bmbt_get_startblock(ep))) {
                         arp->l0 = cpu_to_be64(ep->l0);
                         arp->l1 = cpu_to_be64(ep->l1);
                         arp++; cnt++;
@@ -3572,7 +3572,7 @@ xfs_bmap_extents_to_btree(
         xfs_btree_log_recs(cur, abp, 1, be16_to_cpu(ablock->bb_numrecs));
         ASSERT(*curp == NULL);
         *curp = cur;
-        *logflagsp = XFS_ILOG_CORE | XFS_ILOG_FBROOT(whichfork);
+        *logflagsp = XFS_ILOG_CORE | xfs_ilog_fbroot(whichfork);
         return 0;
 }
 
@@ -3676,7 +3676,7 @@ xfs_bmap_local_to_extents(
                 ip->i_d.di_nblocks = 1;
                 XFS_TRANS_MOD_DQUOT_BYINO(args.mp, tp, ip,
                         XFS_TRANS_DQ_BCOUNT, 1L);
-                flags |= XFS_ILOG_FEXT(whichfork);
+                flags |= xfs_ilog_fext(whichfork);
         } else {
                 ASSERT(XFS_IFORK_NEXTENTS(ip, whichfork) == 0);
                 xfs_bmap_forkoff_reset(ip->i_mount, ip, whichfork);
@@ -4082,7 +4082,7 @@ xfs_bmap_add_attrfork(
                 XFS_IFORK_ASIZE(ip) / (uint)sizeof(xfs_bmbt_rec_t);
         ip->i_afp->if_flags = XFS_IFEXTENTS;
         logflags = 0;
-        XFS_BMAP_INIT(&flist, &firstblock);
+        xfs_bmap_init(&flist, &firstblock);
         switch (ip->i_d.di_format) {
         case XFS_DINODE_FMT_LOCAL:
                 error = xfs_bmap_add_attrfork_local(tp, ip, &firstblock, &flist,
@@ -4162,7 +4162,7 @@ xfs_bmap_add_free(
         ASSERT(bno != NULLFSBLOCK);
         ASSERT(len > 0);
         ASSERT(len <= MAXEXTLEN);
-        ASSERT(!ISNULLSTARTBLOCK(bno));
+        ASSERT(!isnullstartblock(bno));
         agno = XFS_FSB_TO_AGNO(mp, bno);
         agbno = XFS_FSB_TO_AGBNO(mp, bno);
         ASSERT(agno < mp->m_sb.sb_agcount);
@@ -4909,7 +4909,7 @@ xfs_bmapi(
                         got.br_startoff = end;
                 inhole = eof || got.br_startoff > bno;
                 wasdelay = wr && !inhole && !(flags & XFS_BMAPI_DELAY) &&
-                        ISNULLSTARTBLOCK(got.br_startblock);
+                        isnullstartblock(got.br_startblock);
                 /*
                  * First, deal with the hole before the allocated space
                  * that we found, if any.
@@ -5028,7 +5028,7 @@ xfs_bmapi(
                                 }
 
                                 ip->i_delayed_blks += alen;
-                                abno = NULLSTARTBLOCK(indlen);
+                                abno = nullstartblock(indlen);
                         } else {
                                 /*
                                  * If first time, allocate and fill in
@@ -5144,8 +5144,8 @@ xfs_bmapi(
                                 aoff + alen);
 #ifdef DEBUG
                         if (flags & XFS_BMAPI_DELAY) {
-                                ASSERT(ISNULLSTARTBLOCK(got.br_startblock));
-                                ASSERT(STARTBLOCKVAL(got.br_startblock) > 0);
+                                ASSERT(isnullstartblock(got.br_startblock));
+                                ASSERT(startblockval(got.br_startblock) > 0);
                         }
                         ASSERT(got.br_state == XFS_EXT_NORM ||
                                got.br_state == XFS_EXT_UNWRITTEN);
@@ -5179,7 +5179,7 @@ xfs_bmapi(
                         ASSERT((bno >= obno) || (n == 0));
                         ASSERT(bno < end);
                         mval->br_startoff = bno;
-                        if (ISNULLSTARTBLOCK(got.br_startblock)) {
+                        if (isnullstartblock(got.br_startblock)) {
                                 ASSERT(!wr || (flags & XFS_BMAPI_DELAY));
                                 mval->br_startblock = DELAYSTARTBLOCK;
                         } else
@@ -5201,7 +5201,7 @@ xfs_bmapi(
                         ASSERT(mval->br_blockcount <= len);
                 } else {
                         *mval = got;
-                        if (ISNULLSTARTBLOCK(mval->br_startblock)) {
+                        if (isnullstartblock(mval->br_startblock)) {
                                 ASSERT(!wr || (flags & XFS_BMAPI_DELAY));
                                 mval->br_startblock = DELAYSTARTBLOCK;
                         }
@@ -5329,12 +5329,12 @@ error0:
          * Log everything.  Do this after conversion, there's no point in
          * logging the extent records if we've converted to btree format.
          */
-        if ((logflags & XFS_ILOG_FEXT(whichfork)) &&
+        if ((logflags & xfs_ilog_fext(whichfork)) &&
             XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS)
-                logflags &= ~XFS_ILOG_FEXT(whichfork);
-        else if ((logflags & XFS_ILOG_FBROOT(whichfork)) &&
+                logflags &= ~xfs_ilog_fext(whichfork);
+        else if ((logflags & xfs_ilog_fbroot(whichfork)) &&
                  XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE)
-                logflags &= ~XFS_ILOG_FBROOT(whichfork);
+                logflags &= ~xfs_ilog_fbroot(whichfork);
         /*
          * Log whatever the flags say, even if error.  Otherwise we might miss
          * detecting a case where the data is changed, there's an error,
@@ -5411,7 +5411,7 @@ xfs_bmapi_single(
                 *fsb = NULLFSBLOCK;
                 return 0;
         }
-        ASSERT(!ISNULLSTARTBLOCK(got.br_startblock));
+        ASSERT(!isnullstartblock(got.br_startblock));
         ASSERT(bno < got.br_startoff + got.br_blockcount);
         *fsb = got.br_startblock + (bno - got.br_startoff);
         ifp->if_lastex = lastx;
@@ -5543,7 +5543,7 @@ xfs_bunmapi(
                  */
                 ASSERT(ep != NULL);
                 del = got;
-                wasdel = ISNULLSTARTBLOCK(del.br_startblock);
+                wasdel = isnullstartblock(del.br_startblock);
                 if (got.br_startoff < start) {
                         del.br_startoff = start;
                         del.br_blockcount -= start - got.br_startoff;
@@ -5638,7 +5638,7 @@ xfs_bunmapi(
                                 xfs_bmbt_get_all(xfs_iext_get_ext(ifp,
                                                 lastx - 1), &prev);
                                 ASSERT(prev.br_state == XFS_EXT_NORM);
-                                ASSERT(!ISNULLSTARTBLOCK(prev.br_startblock));
+                                ASSERT(!isnullstartblock(prev.br_startblock));
                                 ASSERT(del.br_startblock ==
                                        prev.br_startblock + prev.br_blockcount);
                                 if (prev.br_startoff < start) {
@@ -5666,7 +5666,7 @@ xfs_bunmapi(
                         }
                 }
                 if (wasdel) {
-                        ASSERT(STARTBLOCKVAL(del.br_startblock) > 0);
+                        ASSERT(startblockval(del.br_startblock) > 0);
                         /* Update realtime/data freespace, unreserve quota */
                         if (isrt) {
                                 xfs_filblks_t rtexts;
@@ -5782,12 +5782,12 @@ error0:
          * Log everything.  Do this after conversion, there's no point in
          * logging the extent records if we've converted to btree format.
          */
-        if ((logflags & XFS_ILOG_FEXT(whichfork)) &&
+        if ((logflags & xfs_ilog_fext(whichfork)) &&
             XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS)
-                logflags &= ~XFS_ILOG_FEXT(whichfork);
-        else if ((logflags & XFS_ILOG_FBROOT(whichfork)) &&
+                logflags &= ~xfs_ilog_fext(whichfork);
+        else if ((logflags & xfs_ilog_fbroot(whichfork)) &&
                  XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE)
-                logflags &= ~XFS_ILOG_FBROOT(whichfork);
+                logflags &= ~xfs_ilog_fbroot(whichfork);
         /*
          * Log inode even in the error case, if the transaction
          * is dirty we'll need to shut down the filesystem.
@@ -5838,7 +5838,7 @@ xfs_getbmapx_fix_eof_hole(
                 if (startblock == DELAYSTARTBLOCK)
                         out->bmv_block = -2;
                 else
-                        out->bmv_block = XFS_FSB_TO_DB(ip, startblock);
+                        out->bmv_block = xfs_fsb_to_db(ip, startblock);
                 fileblock = XFS_BB_TO_FSB(ip->i_mount, out->bmv_offset);
                 ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
                 if (xfs_iext_bno_to_ext(ifp, fileblock, &lastx) &&
@@ -5979,7 +5979,7 @@ xfs_getbmap(
         if (nex > XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1)
                 nex = XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1;
 
-        bmapi_flags = XFS_BMAPI_AFLAG(whichfork) |
+        bmapi_flags = xfs_bmapi_aflag(whichfork) |
                         ((iflags & BMV_IF_PREALLOC) ? 0 : XFS_BMAPI_IGSTATE);
 
         /*
@@ -6098,7 +6098,7 @@ xfs_bmap_isaeof(
          */
         *aeof = (off >= s.br_startoff &&
                  off < s.br_startoff + s.br_blockcount &&
-                 ISNULLSTARTBLOCK(s.br_startblock)) ||
+                 isnullstartblock(s.br_startblock)) ||
                 off >= s.br_startoff + s.br_blockcount;
         return 0;
 }
diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h
index 284571c05ed0..be2979d88d32 100644
--- a/fs/xfs/xfs_bmap.h
+++ b/fs/xfs/xfs_bmap.h
@@ -95,7 +95,6 @@ typedef	struct xfs_bmap_free
                                         /* need write cache flushing and no */
                                         /* additional allocation alignments */
 
-#define XFS_BMAPI_AFLAG(w)      xfs_bmapi_aflag(w)
 static inline int xfs_bmapi_aflag(int w)
 {
         return (w == XFS_ATTR_FORK ? XFS_BMAPI_ATTRFORK : 0);
@@ -107,7 +106,6 @@ static inline int xfs_bmapi_aflag(int w)
 #define DELAYSTARTBLOCK         ((xfs_fsblock_t)-1LL)
 #define HOLESTARTBLOCK          ((xfs_fsblock_t)-2LL)
 
-#define XFS_BMAP_INIT(flp,fbp)  xfs_bmap_init(flp,fbp)
 static inline void xfs_bmap_init(xfs_bmap_free_t *flp, xfs_fsblock_t *fbp)
 {
         ((flp)->xbf_first = NULL, (flp)->xbf_count = 0, \
diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c
index ba6b08c2fb02..0760d352586f 100644
--- a/fs/xfs/xfs_bmap_btree.c
+++ b/fs/xfs/xfs_bmap_btree.c
@@ -121,7 +121,7 @@ __xfs_bmbt_get_all(
 
                 b = (((xfs_dfsbno_t)l0 & xfs_mask64lo(9)) << 43) |
                     (((xfs_dfsbno_t)l1) >> 21);
-                ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b));
+                ASSERT((b >> 32) == 0 || isnulldstartblock(b));
                 s->br_startblock = (xfs_fsblock_t)b;
         }
 #else   /* !DEBUG */
@@ -172,7 +172,7 @@ xfs_bmbt_get_startblock(
 
         b = (((xfs_dfsbno_t)r->l0 & xfs_mask64lo(9)) << 43) |
             (((xfs_dfsbno_t)r->l1) >> 21);
-        ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b));
+        ASSERT((b >> 32) == 0 || isnulldstartblock(b));
         return (xfs_fsblock_t)b;
 #else   /* !DEBUG */
         return (xfs_fsblock_t)(((xfs_dfsbno_t)r->l1) >> 21);
@@ -261,7 +261,7 @@ xfs_bmbt_set_allf(
                 ((xfs_bmbt_rec_base_t)blockcount &
                 (xfs_bmbt_rec_base_t)xfs_mask64lo(21));
 #else   /* !XFS_BIG_BLKNOS */
-        if (ISNULLSTARTBLOCK(startblock)) {
+        if (isnullstartblock(startblock)) {
                 r->l0 = ((xfs_bmbt_rec_base_t)extent_flag << 63) |
                         ((xfs_bmbt_rec_base_t)startoff << 9) |
                          (xfs_bmbt_rec_base_t)xfs_mask64lo(9);
@@ -321,7 +321,7 @@ xfs_bmbt_disk_set_allf(
                  ((xfs_bmbt_rec_base_t)blockcount &
                   (xfs_bmbt_rec_base_t)xfs_mask64lo(21)));
 #else   /* !XFS_BIG_BLKNOS */
-        if (ISNULLSTARTBLOCK(startblock)) {
+        if (isnullstartblock(startblock)) {
                 r->l0 = cpu_to_be64(
                         ((xfs_bmbt_rec_base_t)extent_flag << 63) |
                          ((xfs_bmbt_rec_base_t)startoff << 9) |
@@ -382,7 +382,7 @@ xfs_bmbt_set_startblock(
         r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64lo(21)) |
                   (xfs_bmbt_rec_base_t)(v << 21);
 #else   /* !XFS_BIG_BLKNOS */
-        if (ISNULLSTARTBLOCK(v)) {
+        if (isnullstartblock(v)) {
                 r->l0 |= (xfs_bmbt_rec_base_t)xfs_mask64lo(9);
                 r->l1 = (xfs_bmbt_rec_base_t)xfs_mask64hi(11) |
                           ((xfs_bmbt_rec_base_t)v << 21) |
diff --git a/fs/xfs/xfs_bmap_btree.h b/fs/xfs/xfs_bmap_btree.h
index a4555abb6622..0e8df007615e 100644
--- a/fs/xfs/xfs_bmap_btree.h
+++ b/fs/xfs/xfs_bmap_btree.h
@@ -76,26 +76,22 @@ typedef struct xfs_bmbt_rec_host {
 #define DSTARTBLOCKMASK         \
         (((((xfs_dfsbno_t)1) << DSTARTBLOCKMASKBITS) - 1) << STARTBLOCKVALBITS)
 
-#define ISNULLSTARTBLOCK(x)     isnullstartblock(x)
 static inline int isnullstartblock(xfs_fsblock_t x)
 {
         return ((x) & STARTBLOCKMASK) == STARTBLOCKMASK;
 }
 
-#define ISNULLDSTARTBLOCK(x)    isnulldstartblock(x)
 static inline int isnulldstartblock(xfs_dfsbno_t x)
 {
         return ((x) & DSTARTBLOCKMASK) == DSTARTBLOCKMASK;
 }
 
-#define NULLSTARTBLOCK(k)       nullstartblock(k)
 static inline xfs_fsblock_t nullstartblock(int k)
 {
         ASSERT(k < (1 << STARTBLOCKVALBITS));
         return STARTBLOCKMASK | (k);
 }
 
-#define STARTBLOCKVAL(x)        startblockval(x)
 static inline xfs_filblks_t startblockval(xfs_fsblock_t x)
 {
         return (xfs_filblks_t)((x) & ~STARTBLOCKMASK);
diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c
index 2c3ef20f8842..e73c332eb23f 100644
--- a/fs/xfs/xfs_btree.c
+++ b/fs/xfs/xfs_btree.c
@@ -843,7 +843,7 @@ xfs_btree_ptr_is_null(
         union xfs_btree_ptr     *ptr)
 {
         if (cur->bc_flags & XFS_BTREE_LONG_PTRS)
-                return be64_to_cpu(ptr->l) == NULLFSBLOCK;
+                return be64_to_cpu(ptr->l) == NULLDFSBNO;
         else
                 return be32_to_cpu(ptr->s) == NULLAGBLOCK;
 }
@@ -854,7 +854,7 @@ xfs_btree_set_ptr_null(
         union xfs_btree_ptr     *ptr)
 {
         if (cur->bc_flags & XFS_BTREE_LONG_PTRS)
-                ptr->l = cpu_to_be64(NULLFSBLOCK);
+                ptr->l = cpu_to_be64(NULLDFSBNO);
         else
                 ptr->s = cpu_to_be32(NULLAGBLOCK);
 }
@@ -918,8 +918,8 @@ xfs_btree_init_block(
         new->bb_numrecs = cpu_to_be16(numrecs);
 
         if (cur->bc_flags & XFS_BTREE_LONG_PTRS) {
-                new->bb_u.l.bb_leftsib = cpu_to_be64(NULLFSBLOCK);
-                new->bb_u.l.bb_rightsib = cpu_to_be64(NULLFSBLOCK);
+                new->bb_u.l.bb_leftsib = cpu_to_be64(NULLDFSBNO);
+                new->bb_u.l.bb_rightsib = cpu_to_be64(NULLDFSBNO);
         } else {
                 new->bb_u.s.bb_leftsib = cpu_to_be32(NULLAGBLOCK);
                 new->bb_u.s.bb_rightsib = cpu_to_be32(NULLAGBLOCK);
@@ -960,7 +960,7 @@ xfs_btree_buf_to_ptr(
                 ptr->l = cpu_to_be64(XFS_DADDR_TO_FSB(cur->bc_mp,
                                         XFS_BUF_ADDR(bp)));
         else {
-                ptr->s = cpu_to_be32(XFS_DADDR_TO_AGBNO(cur->bc_mp,
+                ptr->s = cpu_to_be32(xfs_daddr_to_agbno(cur->bc_mp,
                                         XFS_BUF_ADDR(bp)));
         }
 }
@@ -971,7 +971,7 @@ xfs_btree_ptr_to_daddr(
         union xfs_btree_ptr     *ptr)
 {
         if (cur->bc_flags & XFS_BTREE_LONG_PTRS) {
-                ASSERT(be64_to_cpu(ptr->l) != NULLFSBLOCK);
+                ASSERT(be64_to_cpu(ptr->l) != NULLDFSBNO);
 
                 return XFS_FSB_TO_DADDR(cur->bc_mp, be64_to_cpu(ptr->l));
         } else {
@@ -2454,7 +2454,7 @@ xfs_btree_new_iroot(
         xfs_btree_log_ptrs(cur, cbp, 1, be16_to_cpu(cblock->bb_numrecs));
 
         *logflags |=
-                XFS_ILOG_CORE | XFS_ILOG_FBROOT(cur->bc_private.b.whichfork);
+                XFS_ILOG_CORE | xfs_ilog_fbroot(cur->bc_private.b.whichfork);
         *stat = 1;
         XFS_BTREE_TRACE_CURSOR(cur, XBT_EXIT);
         return 0;
@@ -3048,7 +3048,7 @@ xfs_btree_kill_iroot(
         cur->bc_bufs[level - 1] = NULL;
         be16_add_cpu(&block->bb_level, -1);
         xfs_trans_log_inode(cur->bc_tp, ip,
-                XFS_ILOG_CORE | XFS_ILOG_FBROOT(cur->bc_private.b.whichfork));
+                XFS_ILOG_CORE | xfs_ilog_fbroot(cur->bc_private.b.whichfork));
         cur->bc_nlevels--;
 out0:
         XFS_BTREE_TRACE_CURSOR(cur, XBT_EXIT);
diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c
index a11a8390bf6c..c45f74ff1a5b 100644
--- a/fs/xfs/xfs_da_btree.c
+++ b/fs/xfs/xfs_da_btree.c
@@ -1597,7 +1597,7 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno)
         nmap = 1;
         ASSERT(args->firstblock != NULL);
         if ((error = xfs_bmapi(tp, dp, bno, count,
-                        XFS_BMAPI_AFLAG(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA|
+                        xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA|
                         XFS_BMAPI_CONTIG,
                         args->firstblock, args->total, &map, &nmap,
                         args->flist, NULL))) {
@@ -1618,7 +1618,7 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno)
                         nmap = MIN(XFS_BMAP_MAX_NMAP, count);
                         c = (int)(bno + count - b);
                         if ((error = xfs_bmapi(tp, dp, b, c,
-                                        XFS_BMAPI_AFLAG(w)|XFS_BMAPI_WRITE|
+                                        xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE|
                                         XFS_BMAPI_METADATA,
                                         args->firstblock, args->total,
                                         &mapp[mapi], &nmap, args->flist,
@@ -1882,7 +1882,7 @@ xfs_da_shrink_inode(xfs_da_args_t *args, xfs_dablk_t dead_blkno,
                  * the last block to the place we want to kill.
                  */
                 if ((error = xfs_bunmapi(tp, dp, dead_blkno, count,
-                                XFS_BMAPI_AFLAG(w)|XFS_BMAPI_METADATA,
+                                xfs_bmapi_aflag(w)|XFS_BMAPI_METADATA,
                                 0, args->firstblock, args->flist, NULL,
                                 &done)) == ENOSPC) {
                         if (w != XFS_DATA_FORK)
@@ -1987,7 +1987,7 @@ xfs_da_do_buf(
                         if ((error = xfs_bmapi(trans, dp, (xfs_fileoff_t)bno,
                                         nfsb,
                                         XFS_BMAPI_METADATA |
-                                                XFS_BMAPI_AFLAG(whichfork),
+                                                xfs_bmapi_aflag(whichfork),
                                         NULL, 0, mapp, &nmap, NULL, NULL)))
                                 goto exit0;
                 }
diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c
index e6ebbaeb4dc6..ab016e5ae7be 100644
--- a/fs/xfs/xfs_ialloc.c
+++ b/fs/xfs/xfs_ialloc.c
@@ -357,7 +357,7 @@ xfs_ialloc_ag_alloc(
                         int     ioffset = i << args.mp->m_sb.sb_inodelog;
                         uint    isize = sizeof(struct xfs_dinode);
 
-                        free = XFS_MAKE_IPTR(args.mp, fbuf, i);
+                        free = xfs_make_iptr(args.mp, fbuf, i);
                         free->di_magic = cpu_to_be16(XFS_DINODE_MAGIC);
                         free->di_version = version;
                         free->di_gen = cpu_to_be32(gen);
@@ -937,7 +937,7 @@ nextag:
                         }
                 }
         }
-        offset = XFS_IALLOC_FIND_FREE(&rec.ir_free);
+        offset = xfs_ialloc_find_free(&rec.ir_free);
         ASSERT(offset >= 0);
         ASSERT(offset < XFS_INODES_PER_CHUNK);
         ASSERT((XFS_AGINO_TO_OFFSET(mp, rec.ir_startino) %
@@ -1279,7 +1279,7 @@ xfs_imap(
                 offset = XFS_INO_TO_OFFSET(mp, ino);
                 ASSERT(offset < mp->m_sb.sb_inopblock);
 
-                cluster_agbno = XFS_DADDR_TO_AGBNO(mp, imap->im_blkno);
+                cluster_agbno = xfs_daddr_to_agbno(mp, imap->im_blkno);
                 offset += (agbno - cluster_agbno) * mp->m_sb.sb_inopblock;
 
                 imap->im_len = XFS_FSB_TO_BB(mp, blks_per_cluster);
diff --git a/fs/xfs/xfs_ialloc.h b/fs/xfs/xfs_ialloc.h
index 50f558a4e0a8..aeee8278f92c 100644
--- a/fs/xfs/xfs_ialloc.h
+++ b/fs/xfs/xfs_ialloc.h
@@ -39,7 +39,6 @@ struct xfs_trans;
 /*
  * Make an inode pointer out of the buffer/offset.
  */
-#define XFS_MAKE_IPTR(mp,b,o)           xfs_make_iptr(mp,b,o)
 static inline struct xfs_dinode *
 xfs_make_iptr(struct xfs_mount *mp, struct xfs_buf *b, int o)
 {
@@ -50,7 +49,6 @@ xfs_make_iptr(struct xfs_mount *mp, struct xfs_buf *b, int o)
 /*
  * Find a free (set) bit in the inode bitmask.
  */
-#define XFS_IALLOC_FIND_FREE(fp)        xfs_ialloc_find_free(fp)
 static inline int xfs_ialloc_find_free(xfs_inofree_t *fp)
 {
         return xfs_lowbit64(*fp);
diff --git a/fs/xfs/xfs_ialloc_btree.h b/fs/xfs/xfs_ialloc_btree.h
index 37e5dd01a577..5580e255ff06 100644
--- a/fs/xfs/xfs_ialloc_btree.h
+++ b/fs/xfs/xfs_ialloc_btree.h
@@ -36,7 +36,6 @@ typedef	__uint64_t	xfs_inofree_t;
 #define XFS_INODES_PER_CHUNK_LOG        (XFS_NBBYLOG + 3)
 #define XFS_INOBT_ALL_FREE      ((xfs_inofree_t)-1)
 
-#define XFS_INOBT_MASKN(i,n)            xfs_inobt_maskn(i,n)
 static inline xfs_inofree_t xfs_inobt_maskn(int i, int n)
 {
         return (((n) >= XFS_INODES_PER_CHUNK ? \
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 5a5e035e5d38..e7ae08d1df48 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -424,6 +424,19 @@ xfs_iformat(
         case XFS_DINODE_FMT_LOCAL:
                 atp = (xfs_attr_shortform_t *)XFS_DFORK_APTR(dip);
                 size = be16_to_cpu(atp->hdr.totsize);
+
+                if (unlikely(size < sizeof(struct xfs_attr_sf_hdr))) {
+                        xfs_fs_repair_cmn_err(CE_WARN, ip->i_mount,
+                                "corrupt inode %Lu "
+                                "(bad attr fork size %Ld).",
+                                (unsigned long long) ip->i_ino,
+                                (long long) size);
+                        XFS_CORRUPTION_ERROR("xfs_iformat(8)",
+                                             XFS_ERRLEVEL_LOW,
+                                             ip->i_mount, dip);
+                        return XFS_ERROR(EFSCORRUPTED);
+                }
+
                 error = xfs_iformat_local(ip, dip, XFS_ATTR_FORK, size);
                 break;
         case XFS_DINODE_FMT_EXTENTS:
@@ -1601,10 +1614,10 @@ xfs_itruncate_finish(
                  * in this file with garbage in them once recovery
                  * runs.
                  */
-                XFS_BMAP_INIT(&free_list, &first_block);
+                xfs_bmap_init(&free_list, &first_block);
                 error = xfs_bunmapi(ntp, ip,
                                     first_unmap_block, unmap_len,
-                                    XFS_BMAPI_AFLAG(fork) |
+                                    xfs_bmapi_aflag(fork) |
                                       (sync ? 0 : XFS_BMAPI_ASYNC),
                                     XFS_ITRUNC_MAX_EXTENTS,
                                     &first_block, &free_list,
@@ -2557,7 +2570,7 @@ xfs_iextents_copy(
         for (i = 0; i < nrecs; i++) {
                 xfs_bmbt_rec_host_t *ep = xfs_iext_get_ext(ifp, i);
                 start_block = xfs_bmbt_get_startblock(ep);
-                if (ISNULLSTARTBLOCK(start_block)) {
+                if (isnullstartblock(start_block)) {
                         /*
                          * It's a delayed allocation extent, so skip it.
                          */
diff --git a/fs/xfs/xfs_inode_item.h b/fs/xfs/xfs_inode_item.h
index 1ff04cc323ad..9957d0602d54 100644
--- a/fs/xfs/xfs_inode_item.h
+++ b/fs/xfs/xfs_inode_item.h
@@ -111,20 +111,16 @@ typedef struct xfs_inode_log_format_64 {
 
 #define XFS_ILI_IOLOCKED_ANY   (XFS_ILI_IOLOCKED_EXCL | XFS_ILI_IOLOCKED_SHARED)
 
-
-#define XFS_ILOG_FBROOT(w)      xfs_ilog_fbroot(w)
 static inline int xfs_ilog_fbroot(int w)
 {
         return (w == XFS_DATA_FORK ? XFS_ILOG_DBROOT : XFS_ILOG_ABROOT);
 }
 
-#define XFS_ILOG_FEXT(w)        xfs_ilog_fext(w)
 static inline int xfs_ilog_fext(int w)
 {
         return (w == XFS_DATA_FORK ? XFS_ILOG_DEXT : XFS_ILOG_AEXT);
 }
 
-#define XFS_ILOG_FDATA(w)       xfs_ilog_fdata(w)
 static inline int xfs_ilog_fdata(int w)
 {
         return (w == XFS_DATA_FORK ? XFS_ILOG_DDATA : XFS_ILOG_ADATA);
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 911062cf73a6..08ce72316bfe 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -155,7 +155,7 @@ xfs_imap_to_bmap(
                         iomapp->iomap_bn = IOMAP_DADDR_NULL;
                         iomapp->iomap_flags |= IOMAP_DELAY;
                 } else {
-                        iomapp->iomap_bn = XFS_FSB_TO_DB(ip, start_block);
+                        iomapp->iomap_bn = xfs_fsb_to_db(ip, start_block);
                         if (ISUNWRITTEN(imap))
                                 iomapp->iomap_flags |= IOMAP_UNWRITTEN;
                 }
@@ -261,7 +261,7 @@ xfs_iomap(
                 xfs_iunlock(ip, lockmode);
                 lockmode = 0;
 
-                if (nimaps && !ISNULLSTARTBLOCK(imap.br_startblock)) {
+                if (nimaps && !isnullstartblock(imap.br_startblock)) {
                         xfs_iomap_map_trace(XFS_IOMAP_WRITE_MAP, ip,
                                         offset, count, iomapp, &imap, flags);
                         break;
@@ -491,7 +491,7 @@ xfs_iomap_write_direct(
         /*
          * Issue the xfs_bmapi() call to allocate the blocks
          */
-        XFS_BMAP_INIT(&free_list, &firstfsb);
+        xfs_bmap_init(&free_list, &firstfsb);
         nimaps = 1;
         error = xfs_bmapi(tp, ip, offset_fsb, count_fsb, bmapi_flag,
                 &firstfsb, 0, &imap, &nimaps, &free_list, NULL);
@@ -751,7 +751,7 @@ xfs_iomap_write_allocate(
                         xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
                         xfs_trans_ihold(tp, ip);
 
-                        XFS_BMAP_INIT(&free_list, &first_block);
+                        xfs_bmap_init(&free_list, &first_block);
 
                         /*
                          * it is possible that the extents have changed since
@@ -911,7 +911,7 @@ xfs_iomap_write_unwritten(
                 /*
                  * Modify the unwritten extent state of the buffer.
                  */
-                XFS_BMAP_INIT(&free_list, &firstfsb);
+                xfs_bmap_init(&free_list, &firstfsb);
                 nimaps = 1;
                 error = xfs_bmapi(tp, ip, offset_fsb, count_fsb,
                                   XFS_BMAPI_WRITE|XFS_BMAPI_CONVERT, &firstfsb,
diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c
index e19d0a8d5618..cf98a805ec90 100644
--- a/fs/xfs/xfs_itable.c
+++ b/fs/xfs/xfs_itable.c
@@ -453,7 +453,7 @@ xfs_bulkstat(
                             (chunkidx = agino - gino + 1) <
                                     XFS_INODES_PER_CHUNK &&
                                         /* there are some left allocated */
-                            XFS_INOBT_MASKN(chunkidx,
+                            xfs_inobt_maskn(chunkidx,
                                     XFS_INODES_PER_CHUNK - chunkidx) & ~gfree) {
                                 /*
                                  * Grab the chunk record.  Mark all the
@@ -464,7 +464,7 @@ xfs_bulkstat(
                                         if (XFS_INOBT_MASK(i) & ~gfree)
                                                 gcnt++;
                                 }
-                                gfree |= XFS_INOBT_MASKN(0, chunkidx);
+                                gfree |= xfs_inobt_maskn(0, chunkidx);
                                 irbp->ir_startino = gino;
                                 irbp->ir_freecount = gcnt;
                                 irbp->ir_free = gfree;
@@ -535,7 +535,7 @@ xfs_bulkstat(
                                      chunkidx < XFS_INODES_PER_CHUNK;
                                      chunkidx += nicluster,
                                      agbno += nbcluster) {
-                                        if (XFS_INOBT_MASKN(chunkidx,
+                                        if (xfs_inobt_maskn(chunkidx,
                                                             nicluster) & ~gfree)
                                                 xfs_btree_reada_bufs(mp, agno,
                                                         agbno, nbcluster);
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index 3c97c6463a4e..35300250e86d 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -45,7 +45,6 @@
 #include "xfs_fsops.h"
 #include "xfs_utils.h"
 
-STATIC int      xfs_mount_log_sb(xfs_mount_t *, __int64_t);
 STATIC int      xfs_uuid_mount(xfs_mount_t *);
 STATIC void     xfs_unmountfs_wait(xfs_mount_t *);
 
@@ -682,7 +681,7 @@ xfs_initialize_perag_data(xfs_mount_t *mp, xfs_agnumber_t agcount)
  * Update alignment values based on mount options and sb values
  */
 STATIC int
-xfs_update_alignment(xfs_mount_t *mp, __uint64_t *update_flags)
+xfs_update_alignment(xfs_mount_t *mp)
 {
         xfs_sb_t        *sbp = &(mp->m_sb);
 
@@ -736,11 +735,11 @@ xfs_update_alignment(xfs_mount_t *mp, __uint64_t *update_flags)
                 if (xfs_sb_version_hasdalign(sbp)) {
                         if (sbp->sb_unit != mp->m_dalign) {
                                 sbp->sb_unit = mp->m_dalign;
-                                *update_flags |= XFS_SB_UNIT;
+                                mp->m_update_flags |= XFS_SB_UNIT;
                         }
                         if (sbp->sb_width != mp->m_swidth) {
                                 sbp->sb_width = mp->m_swidth;
-                                *update_flags |= XFS_SB_WIDTH;
+                                mp->m_update_flags |= XFS_SB_WIDTH;
                         }
                 }
         } else if ((mp->m_flags & XFS_MOUNT_NOALIGN) != XFS_MOUNT_NOALIGN &&
@@ -905,7 +904,6 @@ xfs_mountfs(
         xfs_sb_t        *sbp = &(mp->m_sb);
         xfs_inode_t     *rip;
         __uint64_t      resblks;
-        __int64_t       update_flags = 0LL;
         uint            quotamount, quotaflags;
         int             uuid_mounted = 0;
         int             error = 0;
@@ -933,7 +931,7 @@ xfs_mountfs(
                         "XFS: correcting sb_features alignment problem");
                 sbp->sb_features2 |= sbp->sb_bad_features2;
                 sbp->sb_bad_features2 = sbp->sb_features2;
-                update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2;
+                mp->m_update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2;
 
                 /*
                  * Re-check for ATTR2 in case it was found in bad_features2
@@ -947,11 +945,11 @@ xfs_mountfs(
         if (xfs_sb_version_hasattr2(&mp->m_sb) &&
            (mp->m_flags & XFS_MOUNT_NOATTR2)) {
                 xfs_sb_version_removeattr2(&mp->m_sb);
-                update_flags |= XFS_SB_FEATURES2;
+                mp->m_update_flags |= XFS_SB_FEATURES2;
 
                 /* update sb_versionnum for the clearing of the morebits */
                 if (!sbp->sb_features2)
-                        update_flags |= XFS_SB_VERSIONNUM;
+                        mp->m_update_flags |= XFS_SB_VERSIONNUM;
         }
 
         /*
@@ -960,7 +958,7 @@ xfs_mountfs(
          * allocator alignment is within an ag, therefore ag has
          * to be aligned at stripe boundary.
          */
-        error = xfs_update_alignment(mp, &update_flags);
+        error = xfs_update_alignment(mp);
         if (error)
                 goto error1;
 
@@ -1137,10 +1135,12 @@ xfs_mountfs(
         }
 
         /*
-         * If fs is not mounted readonly, then update the superblock changes.
+         * If this is a read-only mount defer the superblock updates until
+         * the next remount into writeable mode.  Otherwise we would never
+         * perform the update e.g. for the root filesystem.
          */
-        if (update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY)) {
-                error = xfs_mount_log_sb(mp, update_flags);
+        if (mp->m_update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY)) {
+                error = xfs_mount_log_sb(mp, mp->m_update_flags);
                 if (error) {
                         cmn_err(CE_WARN, "XFS: failed to write sb changes");
                         goto error4;
@@ -1820,7 +1820,7 @@ xfs_uuid_mount(
  * be altered by the mount options, as well as any potential sb_features2
  * fixup. Only the first superblock is updated.
  */
-STATIC int
+int
 xfs_mount_log_sb(
         xfs_mount_t     *mp,
         __int64_t       fields)
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index c1e028467327..f5e9937f9bdb 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -44,9 +44,9 @@ typedef struct xfs_trans_reservations {
 
 #ifndef __KERNEL__
 
-#define XFS_DADDR_TO_AGNO(mp,d) \
+#define xfs_daddr_to_agno(mp,d) \
         ((xfs_agnumber_t)(XFS_BB_TO_FSBT(mp, d) / (mp)->m_sb.sb_agblocks))
-#define XFS_DADDR_TO_AGBNO(mp,d) \
+#define xfs_daddr_to_agbno(mp,d) \
         ((xfs_agblock_t)(XFS_BB_TO_FSBT(mp, d) % (mp)->m_sb.sb_agblocks))
 
 #else /* __KERNEL__ */
@@ -327,6 +327,8 @@ typedef struct xfs_mount {
         spinlock_t              m_sync_lock;    /* work item list lock */
         int                     m_sync_seq;     /* sync thread generation no. */
         wait_queue_head_t       m_wait_single_sync_task;
+        __int64_t               m_update_flags; /* sb flags we need to update
+                                                   on the next remount,rw */
 } xfs_mount_t;
 
 /*
@@ -439,7 +441,6 @@ void xfs_do_force_shutdown(struct xfs_mount *mp, int flags, char *fname,
  */
 #define XFS_MFSI_QUIET          0x40    /* Be silent if mount errors found */
 
-#define XFS_DADDR_TO_AGNO(mp,d)         xfs_daddr_to_agno(mp,d)
 static inline xfs_agnumber_t
 xfs_daddr_to_agno(struct xfs_mount *mp, xfs_daddr_t d)
 {
@@ -448,7 +449,6 @@ xfs_daddr_to_agno(struct xfs_mount *mp, xfs_daddr_t d)
         return (xfs_agnumber_t) ld;
 }
 
-#define XFS_DADDR_TO_AGBNO(mp,d)        xfs_daddr_to_agbno(mp,d)
 static inline xfs_agblock_t
 xfs_daddr_to_agbno(struct xfs_mount *mp, xfs_daddr_t d)
 {
@@ -514,6 +514,7 @@ extern int	xfs_mod_incore_sb_unlocked(xfs_mount_t *, xfs_sb_field_t,
                         int64_t, int);
 extern int      xfs_mod_incore_sb_batch(xfs_mount_t *, xfs_mod_sb_t *,
                         uint, int);
+extern int      xfs_mount_log_sb(xfs_mount_t *, __int64_t);
 extern struct xfs_buf *xfs_getsb(xfs_mount_t *, int);
 extern int      xfs_readsb(xfs_mount_t *, int);
 extern void     xfs_freesb(xfs_mount_t *);
diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c
index 86471bb40fd4..58f85e9cd11d 100644
--- a/fs/xfs/xfs_rename.c
+++ b/fs/xfs/xfs_rename.c
@@ -147,7 +147,7 @@ xfs_rename(
         xfs_sort_for_rename(src_dp, target_dp, src_ip, target_ip,
                                 inodes, &num_inodes);
 
-        XFS_BMAP_INIT(&free_list, &first_block);
+        xfs_bmap_init(&free_list, &first_block);
         tp = xfs_trans_alloc(mp, XFS_TRANS_RENAME);
         cancel_flags = XFS_TRANS_RELEASE_LOG_RES;
         spaceres = XFS_RENAME_SPACE_RES(mp, target_name->len);
diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index edf12c7b834c..c5bb86f3ec05 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -120,7 +120,7 @@ xfs_growfs_rt_alloc(
                 if ((error = xfs_trans_iget(mp, tp, ino, 0,
                                                 XFS_ILOCK_EXCL, &ip)))
                         goto error_cancel;
-                XFS_BMAP_INIT(&flist, &firstblock);
+                xfs_bmap_init(&flist, &firstblock);
                 /*
                  * Allocate blocks to the bitmap file.
                  */
diff --git a/fs/xfs/xfs_rw.h b/fs/xfs/xfs_rw.h
index f87db5344ce6..f76c003ec55d 100644
--- a/fs/xfs/xfs_rw.h
+++ b/fs/xfs/xfs_rw.h
@@ -28,7 +28,6 @@ struct xfs_mount;
  * file is a real time file or not, because the bmap code
  * does.
  */
-#define XFS_FSB_TO_DB(ip,fsb)   xfs_fsb_to_db(ip,fsb)
 static inline xfs_daddr_t
 xfs_fsb_to_db(struct xfs_inode *ip, xfs_fsblock_t fsb)
 {
diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h
index 1ed71916e4c9..1b017c657494 100644
--- a/fs/xfs/xfs_sb.h
+++ b/fs/xfs/xfs_sb.h
@@ -505,7 +505,7 @@ static inline void xfs_sb_version_removeattr2(xfs_sb_t *sbp)
 
 #define XFS_HDR_BLOCK(mp,d)     ((xfs_agblock_t)XFS_BB_TO_FSBT(mp,d))
 #define XFS_DADDR_TO_FSB(mp,d)  XFS_AGB_TO_FSB(mp, \
-                        XFS_DADDR_TO_AGNO(mp,d), XFS_DADDR_TO_AGBNO(mp,d))
+                        xfs_daddr_to_agno(mp,d), xfs_daddr_to_agbno(mp,d))
 #define XFS_FSB_TO_DADDR(mp,fsbno)      XFS_AGB_TO_DADDR(mp, \
                         XFS_FSB_TO_AGNO(mp,fsbno), XFS_FSB_TO_AGBNO(mp,fsbno))
 
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index f07bf8768c3a..0e55c5d7db5f 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -862,7 +862,7 @@ xfs_inactive_symlink_rmt(
          * Find the block(s) so we can inval and unmap them.
          */
         done = 0;
-        XFS_BMAP_INIT(&free_list, &first_block);
+        xfs_bmap_init(&free_list, &first_block);
         nmaps = ARRAY_SIZE(mval);
         if ((error = xfs_bmapi(tp, ip, 0, XFS_B_TO_FSB(mp, size),
                         XFS_BMAPI_METADATA, &first_block, 0, mval, &nmaps,
@@ -1288,7 +1288,7 @@ xfs_inactive(
         /*
          * Free the inode.
          */
-        XFS_BMAP_INIT(&free_list, &first_block);
+        xfs_bmap_init(&free_list, &first_block);
         error = xfs_ifree(tp, ip, &free_list);
         if (error) {
                 /*
@@ -1461,7 +1461,7 @@ xfs_create(
         xfs_ilock(dp, XFS_ILOCK_EXCL | XFS_ILOCK_PARENT);
         unlock_dp_on_error = B_TRUE;
 
-        XFS_BMAP_INIT(&free_list, &first_block);
+        xfs_bmap_init(&free_list, &first_block);
 
         ASSERT(ip == NULL);
 
@@ -1879,7 +1879,7 @@ xfs_remove(
                 }
         }
 
-        XFS_BMAP_INIT(&free_list, &first_block);
+        xfs_bmap_init(&free_list, &first_block);
         error = xfs_dir_removename(tp, dp, name, ip->i_ino,
                                         &first_block, &free_list, resblks);
         if (error) {
@@ -2059,7 +2059,7 @@ xfs_link(
         if (error)
                 goto error_return;
 
-        XFS_BMAP_INIT(&free_list, &first_block);
+        xfs_bmap_init(&free_list, &first_block);
 
         error = xfs_dir_createname(tp, tdp, target_name, sip->i_ino,
                                         &first_block, &free_list, resblks);
@@ -2231,7 +2231,7 @@ xfs_mkdir(
         xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
         unlock_dp_on_error = B_FALSE;
 
-        XFS_BMAP_INIT(&free_list, &first_block);
+        xfs_bmap_init(&free_list, &first_block);
 
         error = xfs_dir_createname(tp, dp, dir_name, cdp->i_ino,
                                         &first_block, &free_list, resblks ?
@@ -2438,7 +2438,7 @@ xfs_symlink(
          * Initialize the bmap freelist prior to calling either
          * bmapi or the directory create code.
          */
-        XFS_BMAP_INIT(&free_list, &first_block);
+        xfs_bmap_init(&free_list, &first_block);
 
         /*
          * Allocate an inode for the symlink.
@@ -2860,7 +2860,7 @@ retry:
                 /*
                  * Issue the xfs_bmapi() call to allocate the blocks
                  */
-                XFS_BMAP_INIT(&free_list, &firstfsb);
+                xfs_bmap_init(&free_list, &firstfsb);
                 error = xfs_bmapi(tp, ip, startoffset_fsb,
                                   allocatesize_fsb, bmapi_flag,
                                   &firstfsb, 0, imapp, &nimaps,
@@ -2980,7 +2980,7 @@ xfs_zero_remaining_bytes(
                 XFS_BUF_UNDONE(bp);
                 XFS_BUF_UNWRITE(bp);
                 XFS_BUF_READ(bp);
-                XFS_BUF_SET_ADDR(bp, XFS_FSB_TO_DB(ip, imap.br_startblock));
+                XFS_BUF_SET_ADDR(bp, xfs_fsb_to_db(ip, imap.br_startblock));
                 xfsbdstrat(mp, bp);
                 error = xfs_iowait(bp);
                 if (error) {
@@ -3186,7 +3186,7 @@ xfs_free_file_space(
                 /*
                  * issue the bunmapi() call to free the blocks
                  */
-                XFS_BMAP_INIT(&free_list, &firstfsb);
+                xfs_bmap_init(&free_list, &firstfsb);
                 error = xfs_bunmapi(tp, ip, startoffset_fsb,
                                   endoffset_fsb - startoffset_fsb,
                                   0, 2, &firstfsb, &free_list, NULL, &done);
diff --git a/include/asm-generic/bitops/__ffs.h b/include/asm-generic/bitops/__ffs.h
index 9a3274aecf83..937d7c435575 100644
--- a/include/asm-generic/bitops/__ffs.h
+++ b/include/asm-generic/bitops/__ffs.h
@@ -9,7 +9,7 @@
  *
  * Undefined if no bit exists, so code should check against 0 first.
  */
-static inline unsigned long __ffs(unsigned long word)
+static __always_inline unsigned long __ffs(unsigned long word)
 {
         int num = 0;
 
diff --git a/include/asm-generic/bitops/__fls.h b/include/asm-generic/bitops/__fls.h
index be24465403d6..a60a7ccb6782 100644
--- a/include/asm-generic/bitops/__fls.h
+++ b/include/asm-generic/bitops/__fls.h
@@ -9,7 +9,7 @@
  *
  * Undefined if no set bit exists, so code should check against 0 first.
  */
-static inline unsigned long __fls(unsigned long word)
+static __always_inline unsigned long __fls(unsigned long word)
 {
         int num = BITS_PER_LONG - 1;
 
diff --git a/include/asm-generic/bitops/fls.h b/include/asm-generic/bitops/fls.h
index 850859bc5069..0576d1f42f43 100644
--- a/include/asm-generic/bitops/fls.h
+++ b/include/asm-generic/bitops/fls.h
@@ -9,7 +9,7 @@
  * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
  */
 
-static inline int fls(int x)
+static __always_inline int fls(int x)
 {
         int r = 32;
 
diff --git a/include/asm-generic/bitops/fls64.h b/include/asm-generic/bitops/fls64.h
index 86d403f8b256..b097cf8444e3 100644
--- a/include/asm-generic/bitops/fls64.h
+++ b/include/asm-generic/bitops/fls64.h
@@ -15,7 +15,7 @@
  * at position 64.
  */
 #if BITS_PER_LONG == 32
-static inline int fls64(__u64 x)
+static __always_inline int fls64(__u64 x)
 {
         __u32 h = x >> 32;
         if (h)
@@ -23,7 +23,7 @@ static inline int fls64(__u64 x)
         return fls(x);
 }
 #elif BITS_PER_LONG == 64
-static inline int fls64(__u64 x)
+static __always_inline int fls64(__u64 x)
 {
         if (x == 0)
                 return 0;
diff --git a/include/asm-m68k/auxvec.h b/include/asm-m68k/auxvec.h
deleted file mode 100644
index 844d6d52204b..000000000000
--- a/include/asm-m68k/auxvec.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASMm68k_AUXVEC_H
-#define __ASMm68k_AUXVEC_H
-
-#endif
diff --git a/include/asm-m68k/device.h b/include/asm-m68k/device.h
deleted file mode 100644
index d8f9872b0e2d..000000000000
--- a/include/asm-m68k/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/include/asm-m68k/emergency-restart.h b/include/asm-m68k/emergency-restart.h
deleted file mode 100644
index 108d8c48e42e..000000000000
--- a/include/asm-m68k/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/include/asm-m68k/futex.h b/include/asm-m68k/futex.h
deleted file mode 100644
index 6a332a9f099c..000000000000
--- a/include/asm-m68k/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
diff --git a/include/asm-m68k/ioctl.h b/include/asm-m68k/ioctl.h
deleted file mode 100644
index b279fe06dfe5..000000000000
--- a/include/asm-m68k/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/include/asm-m68k/irq_regs.h b/include/asm-m68k/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/include/asm-m68k/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/include/asm-m68k/kdebug.h b/include/asm-m68k/kdebug.h
deleted file mode 100644
index 6ece1b037665..000000000000
--- a/include/asm-m68k/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/include/asm-m68k/mutex.h b/include/asm-m68k/mutex.h
deleted file mode 100644
index 458c1f7fbc18..000000000000
--- a/include/asm-m68k/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/include/asm-m68k/topology.h b/include/asm-m68k/topology.h
deleted file mode 100644
index ca173e9f26ff..000000000000
--- a/include/asm-m68k/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_M68K_TOPOLOGY_H
-#define _ASM_M68K_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_M68K_TOPOLOGY_H */
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 47809ac94bc3..d54de24bf371 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -528,7 +528,8 @@ struct drm_mode_group {
  *
  */
 struct drm_mode_config {
-        struct mutex mutex; /* protects configuration and IDR */
+        struct mutex mutex; /* protects configuration (mode lists etc.) */
+        struct mutex idr_mutex; /* for IDR management */
         struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */
         /* this is limited to one for now */
         int num_fb;
diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h
index 23936b16426b..0f5c33b0bd3e 100644
--- a/include/linux/debugfs.h
+++ b/include/linux/debugfs.h
@@ -162,6 +162,13 @@ static inline struct dentry *debugfs_create_x32(const char *name, mode_t mode,
         return ERR_PTR(-ENODEV);
 }
 
+struct dentry *debugfs_create_size_t(const char *name, mode_t mode,
+                                     struct dentry *parent,
+                                     size_t *value)
+{
+        return ERR_PTR(-ENODEV);
+}
+
 static inline struct dentry *debugfs_create_bool(const char *name, mode_t mode,
                                                  struct dentry *parent,
                                                  u32 *value)
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index c73f1e2b59b7..3e0f64c335c8 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -297,6 +297,11 @@ static inline void async_tx_ack(struct dma_async_tx_descriptor *tx)
         tx->flags |= DMA_CTRL_ACK;
 }
 
+static inline void async_tx_clear_ack(struct dma_async_tx_descriptor *tx)
+{
+        tx->flags &= ~DMA_CTRL_ACK;
+}
+
 static inline bool async_tx_test_ack(struct dma_async_tx_descriptor *tx)
 {
         return (tx->flags & DMA_CTRL_ACK) == DMA_CTRL_ACK;
@@ -400,11 +405,16 @@ static inline enum dma_status dma_async_is_complete(dma_cookie_t cookie,
 enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie);
 #ifdef CONFIG_DMA_ENGINE
 enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx);
+void dma_issue_pending_all(void);
 #else
 static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx)
 {
         return DMA_SUCCESS;
 }
+static inline void dma_issue_pending_all(void)
+{
+        do { } while (0);
+}
 #endif
 
 /* --- DMA device --- */
@@ -413,7 +423,6 @@ int dma_async_device_register(struct dma_device *device);
 void dma_async_device_unregister(struct dma_device *device);
 void dma_run_dependencies(struct dma_async_tx_descriptor *tx);
 struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type);
-void dma_issue_pending_all(void);
 #define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y)
 struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param);
 void dma_release_channel(struct dma_chan *chan);
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 01d67ba9e985..1ffc23bc5d1e 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -40,9 +40,7 @@
 #define I2C_DRIVERID_SAA7185B   13      /* video encoder                */
 #define I2C_DRIVERID_SAA7110    22      /* video decoder                */
 #define I2C_DRIVERID_SAA5249    24      /* SAA5249 and compatibles      */
-#define I2C_DRIVERID_PCF8583    25      /* real time clock              */
 #define I2C_DRIVERID_TDA7432    27      /* Stereo sound processor       */
-#define I2C_DRIVERID_TVMIXER    28      /* Mixer driver for tv cards    */
 #define I2C_DRIVERID_TVAUDIO    29      /* Generic TV sound driver      */
 #define I2C_DRIVERID_TDA9875    32      /* TV sound decoder chip        */
 #define I2C_DRIVERID_BT819      40     /* video decoder                 */
@@ -54,7 +52,6 @@
 #define I2C_DRIVERID_SAA7191    57      /* video decoder                */
 #define I2C_DRIVERID_INDYCAM    58      /* SGI IndyCam                  */
 #define I2C_DRIVERID_OVCAMCHIP  61      /* OmniVision CMOS image sens.  */
-#define I2C_DRIVERID_MAX6900    63      /* MAX6900 real-time clock      */
 #define I2C_DRIVERID_SAA6752HS  67      /* MPEG2 encoder                */
 #define I2C_DRIVERID_TVEEPROM   68      /* TV EEPROM                    */
 #define I2C_DRIVERID_WM8775     69      /* wm8775 audio processor       */
@@ -62,23 +59,16 @@
 #define I2C_DRIVERID_CX25840    71      /* cx2584x video encoder        */
 #define I2C_DRIVERID_SAA7127    72      /* saa7127 video encoder        */
 #define I2C_DRIVERID_SAA711X    73      /* saa711x video encoders       */
-#define I2C_DRIVERID_AKITAIOEXP 74      /* IO Expander on Sharp SL-C1000 */
 #define I2C_DRIVERID_INFRARED   75      /* I2C InfraRed on Video boards */
 #define I2C_DRIVERID_TVP5150    76      /* TVP5150 video decoder        */
 #define I2C_DRIVERID_WM8739     77      /* wm8739 audio processor       */
 #define I2C_DRIVERID_UPD64083   78      /* upd64083 video processor     */
 #define I2C_DRIVERID_UPD64031A  79      /* upd64031a video processor    */
 #define I2C_DRIVERID_SAA717X    80      /* saa717x video encoder        */
-#define I2C_DRIVERID_DS1672     81      /* Dallas/Maxim DS1672 RTC      */
 #define I2C_DRIVERID_BT866      85      /* Conexant bt866 video encoder */
 #define I2C_DRIVERID_KS0127     86      /* Samsung ks0127 video decoder */
 #define I2C_DRIVERID_TLV320AIC23B 87    /* TI TLV320AIC23B audio codec  */
-#define I2C_DRIVERID_WM8731     89      /* Wolfson WM8731 audio codec */
-#define I2C_DRIVERID_WM8750     90      /* Wolfson WM8750 audio codec */
-#define I2C_DRIVERID_WM8753     91      /* Wolfson WM8753 audio codec */
-#define I2C_DRIVERID_LM4857     92      /* LM4857 Audio Amplifier */
 #define I2C_DRIVERID_VP27SMPX   93      /* Panasonic VP27s tuner internal MPX */
-#define I2C_DRIVERID_CS4270     94      /* Cirrus Logic 4270 audio codec */
 #define I2C_DRIVERID_M52790     95      /* Mitsubishi M52790SP/FP AV switch */
 #define I2C_DRIVERID_CS5345     96      /* cs5345 audio processor       */
 
@@ -89,74 +79,23 @@
  */
 
 /* --- Bit algorithm adapters                                           */
-#define I2C_HW_B_LP             0x010000 /* Parallel port Philips style */
 #define I2C_HW_B_BT848          0x010005 /* BT848 video boards */
-#define I2C_HW_B_VIA            0x010007 /* Via vt82c586b */
-#define I2C_HW_B_HYDRA          0x010008 /* Apple Hydra Mac I/O */
-#define I2C_HW_B_I810           0x01000a /* Intel I810 */
-#define I2C_HW_B_VOO            0x01000b /* 3dfx Voodoo 3 / Banshee */
-#define I2C_HW_B_SCX200         0x01000e /* Nat'l Semi SCx200 I2C */
 #define I2C_HW_B_RIVA           0x010010 /* Riva based graphics cards */
-#define I2C_HW_B_IOC            0x010011 /* IOC bit-wiggling */
-#define I2C_HW_B_IXP2000        0x010016 /* GPIO on IXP2000 systems */
 #define I2C_HW_B_ZR36067        0x010019 /* Zoran-36057/36067 based boards */
-#define I2C_HW_B_PCILYNX        0x01001a /* TI PCILynx I2C adapter */
 #define I2C_HW_B_CX2388x        0x01001b /* connexant 2388x based tv cards */
-#define I2C_HW_B_NVIDIA         0x01001c /* nvidia framebuffer driver */
-#define I2C_HW_B_SAVAGE         0x01001d /* savage framebuffer driver */
-#define I2C_HW_B_RADEON         0x01001e /* radeon framebuffer driver */
 #define I2C_HW_B_EM28XX         0x01001f /* em28xx video capture cards */
 #define I2C_HW_B_CX2341X        0x010020 /* Conexant CX2341X MPEG encoder cards */
-#define I2C_HW_B_INTELFB        0x010021 /* intel framebuffer driver */
 #define I2C_HW_B_CX23885        0x010022 /* conexant 23885 based tv cards (bus1) */
 #define I2C_HW_B_AU0828         0x010023 /* auvitek au0828 usb bridge */
 
-/* --- PCF 8584 based algorithms                                        */
-#define I2C_HW_P_ELEK           0x020002 /* Elektor ISA Bus inteface card */
-
-/* --- PCA 9564 based algorithms */
-#define I2C_HW_A_ISA            0x1a0000 /* generic ISA Bus interface card */
-
-/* --- PowerPC on-chip adapters                                         */
-#define I2C_HW_OCP              0x120000 /* IBM on-chip I2C adapter */
-
-/* --- Broadcom SiByte adapters                                         */
-#define I2C_HW_SIBYTE           0x150000
-
 /* --- SGI adapters                                                     */
 #define I2C_HW_SGI_VINO         0x160000
 
-/* --- XSCALE on-chip adapters                          */
-#define I2C_HW_IOP3XX           0x140000
-
-/* --- Au1550 PSC adapters adapters                                     */
-#define I2C_HW_AU1550_PSC       0x1b0000
-
 /* --- SMBus only adapters                                              */
-#define I2C_HW_SMBUS_PIIX4      0x040000
-#define I2C_HW_SMBUS_ALI15X3    0x040001
-#define I2C_HW_SMBUS_VIA2       0x040002
-#define I2C_HW_SMBUS_I801       0x040004
-#define I2C_HW_SMBUS_AMD756     0x040005
-#define I2C_HW_SMBUS_SIS5595    0x040006
-#define I2C_HW_SMBUS_ALI1535    0x040007
-#define I2C_HW_SMBUS_SIS630     0x040008
-#define I2C_HW_SMBUS_SIS96X     0x040009
-#define I2C_HW_SMBUS_AMD8111    0x04000a
-#define I2C_HW_SMBUS_SCX200     0x04000b
-#define I2C_HW_SMBUS_NFORCE2    0x04000c
 #define I2C_HW_SMBUS_W9968CF    0x04000d
 #define I2C_HW_SMBUS_OV511      0x04000e /* OV511(+) USB 1.1 webcam ICs */
 #define I2C_HW_SMBUS_OV518      0x04000f /* OV518(+) USB 1.1 webcam ICs */
 #define I2C_HW_SMBUS_CAFE       0x040012 /* Marvell 88ALP01 "CAFE" cam  */
-#define I2C_HW_SMBUS_ALI1563    0x040013
-
-/* --- MCP107 adapter */
-#define I2C_HW_MPC107           0x0d0000
-
-/* --- Embedded adapters */
-#define I2C_HW_MV64XXX          0x190000
-#define I2C_HW_BLACKFIN         0x190001 /* ADI Blackfin I2C TWI driver */
 
 /* --- Miscellaneous adapters */
 #define I2C_HW_SAA7146          0x060000 /* SAA7146 video decoder bus */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 20873d402467..fcfbfea3af72 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -151,7 +151,7 @@ struct i2c_driver {
          * has been dynamically allocated by the driver in the function above,
          * it must be freed here.  (LEGACY I2C DRIVERS ONLY)
          */
-        int (*detach_client)(struct i2c_client *);
+        int (*detach_client)(struct i2c_client *) __deprecated;
 
         /* Standard driver model interfaces, for "new style" i2c drivers.
          * With the driver model, device enumeration is NEVER done by drivers;
@@ -429,8 +429,10 @@ static inline int i2c_add_driver(struct i2c_driver *driver)
         return i2c_register_driver(THIS_MODULE, driver);
 }
 
-extern int i2c_attach_client(struct i2c_client *);
-extern int i2c_detach_client(struct i2c_client *);
+/* These are deprecated, your driver should use the standard .probe()
+ * and .remove() methods instead. */
+extern int __deprecated i2c_attach_client(struct i2c_client *);
+extern int __deprecated i2c_detach_client(struct i2c_client *);
 
 extern struct i2c_client *i2c_use_client(struct i2c_client *client);
 extern void i2c_release_client(struct i2c_client *client);
diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h
index 5c34240de746..60e16a551dd6 100644
--- a/include/linux/if_frad.h
+++ b/include/linux/if_frad.h
@@ -26,8 +26,6 @@
 
 #include <linux/if.h>
 
-#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
-
 /* Structures and constants associated with the DLCI device driver */
 
 struct dlci_add
@@ -127,6 +125,8 @@ struct frad_conf
 
 #ifdef __KERNEL__
 
+#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
+
 /* these are the fields of an RFC 1490 header */
 struct frhdr
 {
@@ -190,12 +190,10 @@ struct frad_local
    int               buffer;            /* current buffer for S508 firmware */
 };
 
-#endif /* __KERNEL__ */
-
 #endif /* CONFIG_DLCI || CONFIG_DLCI_MODULE */
 
-#ifdef __KERNEL__
 extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
-#endif
+
+#endif /* __KERNEL__ */
 
 #endif
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 2f3c2d4ef73b..ea0ea1a4c36f 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -48,6 +48,12 @@ extern struct fs_struct init_fs;
         .posix_timers    = LIST_HEAD_INIT(sig.posix_timers),            \
         .cpu_timers     = INIT_CPU_TIMERS(sig.cpu_timers),              \
         .rlim           = INIT_RLIMITS,                                 \
+        .cputime        = { .totals = {                                 \
+                .utime = cputime_zero,                                  \
+                .stime = cputime_zero,                                  \
+                .sum_exec_runtime = 0,                                  \
+                .lock = __SPIN_LOCK_UNLOCKED(sig.cputime.totals.lock),  \
+        }, },                                                           \
 }
 
 extern struct nsproxy init_nsproxy;
diff --git a/include/linux/klist.h b/include/linux/klist.h
index d5a27af9dba5..e91a4e59b771 100644
--- a/include/linux/klist.h
+++ b/include/linux/klist.h
@@ -22,7 +22,7 @@ struct klist {
         struct list_head        k_list;
         void                    (*get)(struct klist_node *);
         void                    (*put)(struct klist_node *);
-};
+} __attribute__ ((aligned (4)));
 
 #define KLIST_INIT(_name, _get, _put)                                   \
         { .k_lock       = __SPIN_LOCK_UNLOCKED(_name.k_lock),           \
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 80f8b8b65fde..48890cf3f96e 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -117,6 +117,10 @@ typedef int __bitwise pci_power_t;
 #define PCI_UNKNOWN     ((pci_power_t __force) 5)
 #define PCI_POWER_ERROR ((pci_power_t __force) -1)
 
+#define PCI_PM_D2_DELAY 200
+#define PCI_PM_D3_WAIT  10
+#define PCI_PM_BUS_WAIT 50
+
 /** The pci_channel state describes connectivity between the CPU and
  *  the pci device.  If some PCI bus between here and the pci device
  *  has crashed or locked up, this info is reflected here.
@@ -252,6 +256,7 @@ struct pci_dev {
         unsigned int    ari_enabled:1;  /* ARI forwarding */
         unsigned int    is_managed:1;
         unsigned int    is_pcie:1;
+        unsigned int    state_saved:1;
         pci_dev_flags_t dev_flags;
         atomic_t        enable_cnt;     /* pci_enable_device has been called */
 
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index 21b781a3350f..0b35b3a1be05 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -24,10 +24,8 @@ void sync_dquots(struct super_block *sb, int type);
 
 int dquot_initialize(struct inode *inode, int type);
 int dquot_drop(struct inode *inode);
-int dquot_drop_locked(struct inode *inode);
 struct dquot *dqget(struct super_block *sb, unsigned int id, int type);
 void dqput(struct dquot *dquot);
-int dquot_is_cached(struct super_block *sb, unsigned int id, int type);
 int dquot_scan_active(struct super_block *sb,
                       int (*fn)(struct dquot *dquot, unsigned long priv),
                       unsigned long priv);
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 4cae9b81a1f8..02e16d207304 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -293,6 +293,9 @@ extern void sched_show_task(struct task_struct *p);
 extern void softlockup_tick(void);
 extern void touch_softlockup_watchdog(void);
 extern void touch_all_softlockup_watchdogs(void);
+extern int proc_dosoftlockup_thresh(struct ctl_table *table, int write,
+                                    struct file *filp, void __user *buffer,
+                                    size_t *lenp, loff_t *ppos);
 extern unsigned int  softlockup_panic;
 extern unsigned long sysctl_hung_task_check_count;
 extern unsigned long sysctl_hung_task_timeout_secs;
@@ -450,6 +453,7 @@ struct task_cputime {
         cputime_t utime;
         cputime_t stime;
         unsigned long long sum_exec_runtime;
+        spinlock_t lock;
 };
 /* Alternate field names when used to cache expirations. */
 #define prof_exp        stime
@@ -465,7 +469,7 @@ struct task_cputime {
  * used for thread group CPU clock calculations.
  */
 struct thread_group_cputime {
-        struct task_cputime *totals;
+        struct task_cputime totals;
 };
 
 /*
@@ -2180,24 +2184,30 @@ static inline int spin_needbreak(spinlock_t *lock)
  * Thread group CPU time accounting.
  */
 
-extern int thread_group_cputime_alloc(struct task_struct *);
-extern void thread_group_cputime(struct task_struct *, struct task_cputime *);
-
-static inline void thread_group_cputime_init(struct signal_struct *sig)
+static inline
+void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times)
 {
-        sig->cputime.totals = NULL;
+        struct task_cputime *totals = &tsk->signal->cputime.totals;
+        unsigned long flags;
+
+        spin_lock_irqsave(&totals->lock, flags);
+        *times = *totals;
+        spin_unlock_irqrestore(&totals->lock, flags);
 }
 
-static inline int thread_group_cputime_clone_thread(struct task_struct *curr)
+static inline void thread_group_cputime_init(struct signal_struct *sig)
 {
-        if (curr->signal->cputime.totals)
-                return 0;
-        return thread_group_cputime_alloc(curr);
+        sig->cputime.totals = (struct task_cputime){
+                .utime = cputime_zero,
+                .stime = cputime_zero,
+                .sum_exec_runtime = 0,
+        };
+
+        spin_lock_init(&sig->cputime.totals.lock);
 }
 
 static inline void thread_group_cputime_free(struct signal_struct *sig)
 {
-        free_percpu(sig->cputime.totals);
 }
 
 /*
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index b36291130f22..3cd51e579ab1 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -118,12 +118,24 @@ struct execute_work {
                 init_timer(&(_work)->timer);                    \
         } while (0)
 
+#define INIT_DELAYED_WORK_ON_STACK(_work, _func)                \
+        do {                                                    \
+                INIT_WORK(&(_work)->work, (_func));             \
+                init_timer_on_stack(&(_work)->timer);           \
+        } while (0)
+
 #define INIT_DELAYED_WORK_DEFERRABLE(_work, _func)                      \
         do {                                                    \
                 INIT_WORK(&(_work)->work, (_func));             \
                 init_timer_deferrable(&(_work)->timer);         \
         } while (0)
 
+#define INIT_DELAYED_WORK_ON_STACK(_work, _func)                \
+        do {                                                    \
+                INIT_WORK(&(_work)->work, (_func));             \
+                init_timer_on_stack(&(_work)->timer);           \
+        } while (0)
+
 /**
  * work_pending - Find out whether a work item is currently pending
  * @work: The work item in question
diff --git a/include/net/sctp/checksum.h b/include/net/sctp/checksum.h
index b799fb21519a..2fec3c366e81 100644
--- a/include/net/sctp/checksum.h
+++ b/include/net/sctp/checksum.h
@@ -79,5 +79,5 @@ static inline __be32 sctp_update_cksum(__u8 *buffer, __u16 length, __be32 crc32)
 
 static inline __be32 sctp_end_cksum(__be32 crc32)
 {
-        return ~crc32;
+        return (__force __be32)~cpu_to_le32((__force u32)crc32);
 }
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index 93a4edb148b5..dfa804958820 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -108,7 +108,7 @@
 #define SND_SOC_DAPM_SWITCH_E(wname, wreg, wshift, winvert, wcontrols, \
         wevent, wflags) \
 {       .id = snd_soc_dapm_switch, .name = wname, .reg = wreg, .shift = wshift, \
-        .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1 \
+        .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1, \
         .event = wevent, .event_flags = wflags}
 #define SND_SOC_DAPM_MUX_E(wname, wreg, wshift, winvert, wcontrols, \
         wevent, wflags) \
diff --git a/init/Kconfig b/init/Kconfig
index 2af83825634e..f068071fcc5d 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -238,6 +238,98 @@ config AUDIT_TREE
         def_bool y
         depends on AUDITSYSCALL && INOTIFY
 
+menu "RCU Subsystem"
+
+choice
+        prompt "RCU Implementation"
+        default CLASSIC_RCU
+
+config CLASSIC_RCU
+        bool "Classic RCU"
+        help
+          This option selects the classic RCU implementation that is
+          designed for best read-side performance on non-realtime
+          systems.
+
+          Select this option if you are unsure.
+
+config TREE_RCU
+        bool "Tree-based hierarchical RCU"
+        help
+          This option selects the RCU implementation that is
+          designed for very large SMP system with hundreds or
+          thousands of CPUs.
+
+config PREEMPT_RCU
+        bool "Preemptible RCU"
+        depends on PREEMPT
+        help
+          This option reduces the latency of the kernel by making certain
+          RCU sections preemptible. Normally RCU code is non-preemptible, if
+          this option is selected then read-only RCU sections become
+          preemptible. This helps latency, but may expose bugs due to
+          now-naive assumptions about each RCU read-side critical section
+          remaining on a given CPU through its execution.
+
+endchoice
+
+config RCU_TRACE
+        bool "Enable tracing for RCU"
+        depends on TREE_RCU || PREEMPT_RCU
+        help
+          This option provides tracing in RCU which presents stats
+          in debugfs for debugging RCU implementation.
+
+          Say Y here if you want to enable RCU tracing
+          Say N if you are unsure.
+
+config RCU_FANOUT
+        int "Tree-based hierarchical RCU fanout value"
+        range 2 64 if 64BIT
+        range 2 32 if !64BIT
+        depends on TREE_RCU
+        default 64 if 64BIT
+        default 32 if !64BIT
+        help
+          This option controls the fanout of hierarchical implementations
+          of RCU, allowing RCU to work efficiently on machines with
+          large numbers of CPUs.  This value must be at least the cube
+          root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit
+          systems and up to 262,144 for 64-bit systems.
+
+          Select a specific number if testing RCU itself.
+          Take the default if unsure.
+
+config RCU_FANOUT_EXACT
+        bool "Disable tree-based hierarchical RCU auto-balancing"
+        depends on TREE_RCU
+        default n
+        help
+          This option forces use of the exact RCU_FANOUT value specified,
+          regardless of imbalances in the hierarchy.  This is useful for
+          testing RCU itself, and might one day be useful on systems with
+          strong NUMA behavior.
+
+          Without RCU_FANOUT_EXACT, the code will balance the hierarchy.
+
+          Say N if unsure.
+
+config TREE_RCU_TRACE
+        def_bool RCU_TRACE && TREE_RCU
+        select DEBUG_FS
+        help
+          This option provides tracing for the TREE_RCU implementation,
+          permitting Makefile to trivially select kernel/rcutree_trace.c.
+
+config PREEMPT_RCU_TRACE
+        def_bool RCU_TRACE && PREEMPT_RCU
+        select DEBUG_FS
+        help
+          This option provides tracing for the PREEMPT_RCU implementation,
+          permitting Makefile to trivially select kernel/rcupreempt_trace.c.
+
+endmenu # "RCU Subsystem"
+
 config IKCONFIG
         tristate "Kernel .config support"
         ---help---
@@ -541,6 +633,14 @@ config PID_NS
           Unless you want to work with an experimental feature
           say N here.
 
+config NET_NS
+        bool "Network namespace"
+        default n
+        depends on NAMESPACES && EXPERIMENTAL && NET
+        help
+          Allow user space to create what appear to be multiple instances
+          of the network stack.
+
 config BLK_DEV_INITRD
         bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
         depends on BROKEN || !FRV
@@ -625,13 +725,6 @@ config KALLSYMS_ALL
 
            Say N.
 
-config KALLSYMS_STRIP_GENERATED
-        bool "Strip machine generated symbols from kallsyms"
-        depends on KALLSYMS_ALL
-        default y
-        help
-          Say N if you want kallsyms to retain even machine generated symbols.
-
 config KALLSYMS_EXTRA_PASS
         bool "Do an extra kallsyms pass"
         depends on KALLSYMS
@@ -972,90 +1065,3 @@ source "block/Kconfig"
 config PREEMPT_NOTIFIERS
         bool
 
-choice
-        prompt "RCU Implementation"
-        default CLASSIC_RCU
-
-config CLASSIC_RCU
-        bool "Classic RCU"
-        help
-          This option selects the classic RCU implementation that is
-          designed for best read-side performance on non-realtime
-          systems.
-
-          Select this option if you are unsure.
-
-config TREE_RCU
-        bool "Tree-based hierarchical RCU"
-        help
-          This option selects the RCU implementation that is
-          designed for very large SMP system with hundreds or
-          thousands of CPUs.
-
-config PREEMPT_RCU
-        bool "Preemptible RCU"
-        depends on PREEMPT
-        help
-          This option reduces the latency of the kernel by making certain
-          RCU sections preemptible. Normally RCU code is non-preemptible, if
-          this option is selected then read-only RCU sections become
-          preemptible. This helps latency, but may expose bugs due to
-          now-naive assumptions about each RCU read-side critical section
-          remaining on a given CPU through its execution.
-
-endchoice
-
-config RCU_TRACE
-        bool "Enable tracing for RCU"
-        depends on TREE_RCU || PREEMPT_RCU
-        help
-          This option provides tracing in RCU which presents stats
-          in debugfs for debugging RCU implementation.
-
-          Say Y here if you want to enable RCU tracing
-          Say N if you are unsure.
-
-config RCU_FANOUT
-        int "Tree-based hierarchical RCU fanout value"
-        range 2 64 if 64BIT
-        range 2 32 if !64BIT
-        depends on TREE_RCU
-        default 64 if 64BIT
-        default 32 if !64BIT
-        help
-          This option controls the fanout of hierarchical implementations
-          of RCU, allowing RCU to work efficiently on machines with
-          large numbers of CPUs.  This value must be at least the cube
-          root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit
-          systems and up to 262,144 for 64-bit systems.
-
-          Select a specific number if testing RCU itself.
-          Take the default if unsure.
-
-config RCU_FANOUT_EXACT
-        bool "Disable tree-based hierarchical RCU auto-balancing"
-        depends on TREE_RCU
-        default n
-        help
-          This option forces use of the exact RCU_FANOUT value specified,
-          regardless of imbalances in the hierarchy.  This is useful for
-          testing RCU itself, and might one day be useful on systems with
-          strong NUMA behavior.
-
-          Without RCU_FANOUT_EXACT, the code will balance the hierarchy.
-
-          Say N if unsure.
-
-config TREE_RCU_TRACE
-        def_bool RCU_TRACE && TREE_RCU
-        select DEBUG_FS
-        help
-          This option provides tracing for the TREE_RCU implementation,
-          permitting Makefile to trivially select kernel/rcutree_trace.c.
-
-config PREEMPT_RCU_TRACE
-        def_bool RCU_TRACE && PREEMPT_RCU
-        select DEBUG_FS
-        help
-          This option provides tracing for the PREEMPT_RCU implementation,
-          permitting Makefile to trivially select kernel/rcupreempt_trace.c.
diff --git a/kernel/dma-coherent.c b/kernel/dma-coherent.c
index 038707404b76..962a3b574f21 100644
--- a/kernel/dma-coherent.c
+++ b/kernel/dma-coherent.c
@@ -98,7 +98,7 @@ EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
  * @size:       size of requested memory area
  * @dma_handle: This will be filled with the correct dma handle
  * @ret:        This pointer will be filled with the virtual address
- *              to allocated area.
+ *              to allocated area.
  *
  * This function should be only called from per-arch dma_alloc_coherent()
  * to support allocation from per-device coherent memory pools.
@@ -118,31 +118,32 @@ int dma_alloc_from_coherent(struct device *dev, ssize_t size,
         mem = dev->dma_mem;
         if (!mem)
                 return 0;
-        if (unlikely(size > mem->size))
-                return 0;
+
+        *ret = NULL;
+
+        if (unlikely(size > (mem->size << PAGE_SHIFT)))
+                goto err;
 
         pageno = bitmap_find_free_region(mem->bitmap, mem->size, order);
-        if (pageno >= 0) {
-                /*
-                 * Memory was found in the per-device arena.
-                 */
-                *dma_handle = mem->device_base + (pageno << PAGE_SHIFT);
-                *ret = mem->virt_base + (pageno << PAGE_SHIFT);
-                memset(*ret, 0, size);
-        } else if (mem->flags & DMA_MEMORY_EXCLUSIVE) {
-                /*
-                 * The per-device arena is exhausted and we are not
-                 * permitted to fall back to generic memory.
-                 */
-                *ret = NULL;
-        } else {
-                /*
-                 * The per-device arena is exhausted and we are
-                 * permitted to fall back to generic memory.
-                 */
-                 return 0;
-        }
+        if (unlikely(pageno < 0))
+                goto err;
+
+        /*
+         * Memory was found in the per-device area.
+         */
+        *dma_handle = mem->device_base + (pageno << PAGE_SHIFT);
+        *ret = mem->virt_base + (pageno << PAGE_SHIFT);
+        memset(*ret, 0, size);
+
         return 1;
+
+err:
+        /*
+         * In the case where the allocation can not be satisfied from the
+         * per-device area, try to fall back to generic memory if the
+         * constraints allow it.
+         */
+        return mem->flags & DMA_MEMORY_EXCLUSIVE;
 }
 EXPORT_SYMBOL(dma_alloc_from_coherent);
 
diff --git a/kernel/fork.c b/kernel/fork.c
index bf0cef8bbdf2..242a706e7721 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -817,17 +817,17 @@ static void posix_cpu_timers_init_group(struct signal_struct *sig)
 static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
 {
         struct signal_struct *sig;
-        int ret;
 
         if (clone_flags & CLONE_THREAD) {
-                ret = thread_group_cputime_clone_thread(current);
-                if (likely(!ret)) {
-                        atomic_inc(&current->signal->count);
-                        atomic_inc(&current->signal->live);
-                }
-                return ret;
+                atomic_inc(&current->signal->count);
+                atomic_inc(&current->signal->live);
+                return 0;
         }
         sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL);
+
+        if (sig)
+                posix_cpu_timers_init_group(sig);
+
         tsk->signal = sig;
         if (!sig)
                 return -ENOMEM;
@@ -864,8 +864,6 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
         memcpy(sig->rlim, current->signal->rlim, sizeof sig->rlim);
         task_unlock(current->group_leader);
 
-        posix_cpu_timers_init_group(sig);
-
         acct_init_pacct(&sig->pacct);
 
         tty_audit_fork(sig);
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 2dc30c59c5fd..f33afb0407bc 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -614,7 +614,9 @@ void clock_was_set(void)
  */
 void hres_timers_resume(void)
 {
-        /* Retrigger the CPU local events: */
+        WARN_ONCE(!irqs_disabled(),
+                  KERN_INFO "hres_timers_resume() called with IRQs enabled!");
+
         retrigger_next_event(NULL);
 }
 
diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c
index e694afa0eb8c..7b8b0f21a5b1 100644
--- a/kernel/kallsyms.c
+++ b/kernel/kallsyms.c
@@ -30,19 +30,20 @@
 #define all_var 0
 #endif
 
-extern const unsigned long kallsyms_addresses[];
-extern const u8 kallsyms_names[];
+/* These will be re-linked against their real values during the second link stage */
+extern const unsigned long kallsyms_addresses[] __attribute__((weak));
+extern const u8 kallsyms_names[] __attribute__((weak));
 
 /* tell the compiler that the count isn't in the small data section if the arch
  * has one (eg: FRV)
  */
 extern const unsigned long kallsyms_num_syms
-        __attribute__((__section__(".rodata")));
+__attribute__((weak, section(".rodata")));
 
-extern const u8 kallsyms_token_table[];
-extern const u16 kallsyms_token_index[];
+extern const u8 kallsyms_token_table[] __attribute__((weak));
+extern const u16 kallsyms_token_index[] __attribute__((weak));
 
-extern const unsigned long kallsyms_markers[];
+extern const unsigned long kallsyms_markers[] __attribute__((weak));
 
 static inline int is_kernel_inittext(unsigned long addr)
 {
@@ -167,6 +168,9 @@ static unsigned long get_symbol_pos(unsigned long addr,
         unsigned long symbol_start = 0, symbol_end = 0;
         unsigned long i, low, high, mid;
 
+        /* This kernel should never had been booted. */
+        BUG_ON(!kallsyms_addresses);
+
         /* do a binary search on the sorted kallsyms_addresses array */
         low = 0;
         high = kallsyms_num_syms;
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 157de3a47832..fa07da94d7be 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -10,76 +10,6 @@
 #include <linux/kernel_stat.h>
 
 /*
- * Allocate the thread_group_cputime structure appropriately and fill in the
- * current values of the fields.  Called from copy_signal() via
- * thread_group_cputime_clone_thread() when adding a second or subsequent
- * thread to a thread group.  Assumes interrupts are enabled when called.
- */
-int thread_group_cputime_alloc(struct task_struct *tsk)
-{
-        struct signal_struct *sig = tsk->signal;
-        struct task_cputime *cputime;
-
-        /*
-         * If we have multiple threads and we don't already have a
-         * per-CPU task_cputime struct (checked in the caller), allocate
-         * one and fill it in with the times accumulated so far.  We may
-         * race with another thread so recheck after we pick up the sighand
-         * lock.
-         */
-        cputime = alloc_percpu(struct task_cputime);
-        if (cputime == NULL)
-                return -ENOMEM;
-        spin_lock_irq(&tsk->sighand->siglock);
-        if (sig->cputime.totals) {
-                spin_unlock_irq(&tsk->sighand->siglock);
-                free_percpu(cputime);
-                return 0;
-        }
-        sig->cputime.totals = cputime;
-        cputime = per_cpu_ptr(sig->cputime.totals, smp_processor_id());
-        cputime->utime = tsk->utime;
-        cputime->stime = tsk->stime;
-        cputime->sum_exec_runtime = tsk->se.sum_exec_runtime;
-        spin_unlock_irq(&tsk->sighand->siglock);
-        return 0;
-}
-
-/**
- * thread_group_cputime - Sum the thread group time fields across all CPUs.
- *
- * @tsk:        The task we use to identify the thread group.
- * @times:      task_cputime structure in which we return the summed fields.
- *
- * Walk the list of CPUs to sum the per-CPU time fields in the thread group
- * time structure.
- */
-void thread_group_cputime(
-        struct task_struct *tsk,
-        struct task_cputime *times)
-{
-        struct task_cputime *totals, *tot;
-        int i;
-
-        totals = tsk->signal->cputime.totals;
-        if (!totals) {
-                times->utime = tsk->utime;
-                times->stime = tsk->stime;
-                times->sum_exec_runtime = tsk->se.sum_exec_runtime;
-                return;
-        }
-
-        times->stime = times->utime = cputime_zero;
-        times->sum_exec_runtime = 0;
-        for_each_possible_cpu(i) {
-                tot = per_cpu_ptr(totals, i);
-                times->utime = cputime_add(times->utime, tot->utime);
-                times->stime = cputime_add(times->stime, tot->stime);
-                times->sum_exec_runtime += tot->sum_exec_runtime;
-        }
-}
-
-/*
  * Called after updating RLIMIT_CPU to set timer expiration if necessary.
  */
 void update_rlimit_cpu(unsigned long rlim_new)
diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c
index 490934fc7ac3..bd5a9003497c 100644
--- a/kernel/rcuclassic.c
+++ b/kernel/rcuclassic.c
@@ -716,7 +716,7 @@ void rcu_check_callbacks(int cpu, int user)
         raise_rcu_softirq();
 }
 
-static void rcu_init_percpu_data(int cpu, struct rcu_ctrlblk *rcp,
+static void __cpuinit rcu_init_percpu_data(int cpu, struct rcu_ctrlblk *rcp,
                                                 struct rcu_data *rdp)
 {
         unsigned long flags;
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index f2d8638e6c60..b2fd602a6f6f 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -1314,7 +1314,7 @@ int rcu_needs_cpu(int cpu)
  * access due to the fact that this CPU cannot possibly have any RCU
  * callbacks in flight yet.
  */
-static void
+static void __cpuinit
 rcu_init_percpu_data(int cpu, struct rcu_state *rsp)
 {
         unsigned long flags;
diff --git a/kernel/relay.c b/kernel/relay.c
index 09ac2008f77b..9d79b7854fa6 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -663,8 +663,10 @@ int relay_late_setup_files(struct rchan *chan,
 
         mutex_lock(&relay_channels_mutex);
         /* Is chan already set up? */
-        if (unlikely(chan->has_base_filename))
+        if (unlikely(chan->has_base_filename)) {
+                mutex_unlock(&relay_channels_mutex);
                 return -EEXIST;
+        }
         chan->has_base_filename = 1;
         chan->parent = parent;
         curr_cpu = get_cpu();
diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h
index f2773b5d1226..8ab0cef8ecab 100644
--- a/kernel/sched_stats.h
+++ b/kernel/sched_stats.h
@@ -296,6 +296,7 @@ sched_info_switch(struct task_struct *prev, struct task_struct *next)
 static inline void account_group_user_time(struct task_struct *tsk,
                                            cputime_t cputime)
 {
+        struct task_cputime *times;
         struct signal_struct *sig;
 
         /* tsk == current, ensure it is safe to use ->signal */
@@ -303,13 +304,11 @@ static inline void account_group_user_time(struct task_struct *tsk,
                 return;
 
         sig = tsk->signal;
-        if (sig->cputime.totals) {
-                struct task_cputime *times;
+        times = &sig->cputime.totals;
 
-                times = per_cpu_ptr(sig->cputime.totals, get_cpu());
-                times->utime = cputime_add(times->utime, cputime);
-                put_cpu_no_resched();
-        }
+        spin_lock(&times->lock);
+        times->utime = cputime_add(times->utime, cputime);
+        spin_unlock(&times->lock);
 }
 
 /**
@@ -325,6 +324,7 @@ static inline void account_group_user_time(struct task_struct *tsk,
 static inline void account_group_system_time(struct task_struct *tsk,
                                              cputime_t cputime)
 {
+        struct task_cputime *times;
         struct signal_struct *sig;
 
         /* tsk == current, ensure it is safe to use ->signal */
@@ -332,13 +332,11 @@ static inline void account_group_system_time(struct task_struct *tsk,
                 return;
 
         sig = tsk->signal;
-        if (sig->cputime.totals) {
-                struct task_cputime *times;
+        times = &sig->cputime.totals;
 
-                times = per_cpu_ptr(sig->cputime.totals, get_cpu());
-                times->stime = cputime_add(times->stime, cputime);
-                put_cpu_no_resched();
-        }
+        spin_lock(&times->lock);
+        times->stime = cputime_add(times->stime, cputime);
+        spin_unlock(&times->lock);
 }
 
 /**
@@ -354,6 +352,7 @@ static inline void account_group_system_time(struct task_struct *tsk,
 static inline void account_group_exec_runtime(struct task_struct *tsk,
                                               unsigned long long ns)
 {
+        struct task_cputime *times;
         struct signal_struct *sig;
 
         sig = tsk->signal;
@@ -362,11 +361,9 @@ static inline void account_group_exec_runtime(struct task_struct *tsk,
         if (unlikely(!sig))
                 return;
 
-        if (sig->cputime.totals) {
-                struct task_cputime *times;
+        times = &sig->cputime.totals;
 
-                times = per_cpu_ptr(sig->cputime.totals, get_cpu());
-                times->sum_exec_runtime += ns;
-                put_cpu_no_resched();
-        }
+        spin_lock(&times->lock);
+        times->sum_exec_runtime += ns;
+        spin_unlock(&times->lock);
 }
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index d9188c66278a..85d5a2455103 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -16,6 +16,7 @@
 #include <linux/lockdep.h>
 #include <linux/notifier.h>
 #include <linux/module.h>
+#include <linux/sysctl.h>
 
 #include <asm/irq_regs.h>
 
@@ -88,6 +89,14 @@ void touch_all_softlockup_watchdogs(void)
 }
 EXPORT_SYMBOL(touch_all_softlockup_watchdogs);
 
+int proc_dosoftlockup_thresh(struct ctl_table *table, int write,
+                             struct file *filp, void __user *buffer,
+                             size_t *lenp, loff_t *ppos)
+{
+        touch_all_softlockup_watchdogs();
+        return proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos);
+}
+
 /*
  * This callback runs from the timer interrupt, and checks
  * whether the watchdog thread has hung or not:
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 368d1638ee78..790f9d785663 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -809,7 +809,7 @@ static struct ctl_table kern_table[] = {
                 .data           = &softlockup_thresh,
                 .maxlen         = sizeof(int),
                 .mode           = 0644,
-                .proc_handler   = &proc_dointvec_minmax,
+                .proc_handler   = &proc_dosoftlockup_thresh,
                 .strategy       = &sysctl_intvec,
                 .extra1         = &neg_one,
                 .extra2         = &sixty,
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 1b6c05bd0d0a..d3f1ef4d5cbe 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -134,7 +134,7 @@ __setup("nohz=", setup_tick_nohz);
  * value. We do this unconditionally on any cpu, as we don't know whether the
  * cpu, which has the update task assigned is in a long sleep.
  */
-void tick_nohz_update_jiffies(void)
+static void tick_nohz_update_jiffies(void)
 {
         int cpu = smp_processor_id();
         struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 2f445833ae37..1f0c509b40d3 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -971,6 +971,8 @@ undo:
 }
 
 #ifdef CONFIG_SMP
+static struct workqueue_struct *work_on_cpu_wq __read_mostly;
+
 struct work_for_cpu {
         struct work_struct work;
         long (*fn)(void *);
@@ -991,8 +993,8 @@ static void do_work_for_cpu(struct work_struct *w)
  * @fn: the function to run
  * @arg: the function arg
  *
- * This will return -EINVAL in the cpu is not online, or the return value
- * of @fn otherwise.
+ * This will return the value @fn returns.
+ * It is up to the caller to ensure that the cpu doesn't go offline.
  */
 long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg)
 {
@@ -1001,14 +1003,8 @@ long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg)
         INIT_WORK(&wfc.work, do_work_for_cpu);
         wfc.fn = fn;
         wfc.arg = arg;
-        get_online_cpus();
-        if (unlikely(!cpu_online(cpu)))
-                wfc.ret = -EINVAL;
-        else {
-                schedule_work_on(cpu, &wfc.work);
-                flush_work(&wfc.work);
-        }
-        put_online_cpus();
+        queue_work_on(cpu, work_on_cpu_wq, &wfc.work);
+        flush_work(&wfc.work);
 
         return wfc.ret;
 }
@@ -1025,4 +1021,8 @@ void __init init_workqueues(void)
         hotcpu_notifier(workqueue_cpu_callback, 0);
         keventd_wq = create_workqueue("events");
         BUG_ON(!keventd_wq);
+#ifdef CONFIG_SMP
+        work_on_cpu_wq = create_workqueue("work_on_cpu");
+        BUG_ON(!work_on_cpu_wq);
+#endif
 }
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 4c9ae6085c75..29044f500269 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -570,6 +570,15 @@ config DEBUG_NOTIFIERS
           This is a relatively cheap check but if you care about maximum
           performance, say N.
 
+#
+# Select this config option from the architecture Kconfig, if it
+# it is preferred to always offer frame pointers as a config
+# option on the architecture (regardless of KERNEL_DEBUG):
+#
+config ARCH_WANT_FRAME_POINTERS
+        bool
+        help
+
 config FRAME_POINTER
         bool "Compile the kernel with frame pointers"
         depends on DEBUG_KERNEL && \
@@ -633,19 +642,6 @@ config RCU_TORTURE_TEST_RUNNABLE
 
 config RCU_CPU_STALL_DETECTOR
         bool "Check for stalled CPUs delaying RCU grace periods"
-        depends on CLASSIC_RCU
-        default n
-        help
-          This option causes RCU to printk information on which
-          CPUs are delaying the current grace period, but only when
-          the grace period extends for excessive time periods.
-
-          Say Y if you want RCU to perform such checks.
-
-          Say N if you are unsure.
-
-config RCU_CPU_STALL_DETECTOR
-        bool "Check for stalled CPUs delaying RCU grace periods"
         depends on CLASSIC_RCU || TREE_RCU
         default n
         help
diff --git a/mm/nommu.c b/mm/nommu.c
index 8cee8c8ff0f2..0c3e7d2114f6 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -10,7 +10,7 @@
  *  Copyright (c) 2000-2003 David McCullough <davidm@snapgear.com>
  *  Copyright (c) 2000-2001 D Jeff Dionne <jeff@uClinux.org>
  *  Copyright (c) 2002      Greg Ungerer <gerg@snapgear.com>
- *  Copyright (c) 2007-2008 Paul Mundt <lethal@linux-sh.org>
+ *  Copyright (c) 2007-2009 Paul Mundt <lethal@linux-sh.org>
  */
 
 #include <linux/module.h>
@@ -394,6 +394,24 @@ void vunmap(const void *addr)
 }
 EXPORT_SYMBOL(vunmap);
 
+void *vm_map_ram(struct page **pages, unsigned int count, int node, pgprot_t prot)
+{
+        BUG();
+        return NULL;
+}
+EXPORT_SYMBOL(vm_map_ram);
+
+void vm_unmap_ram(const void *mem, unsigned int count)
+{
+        BUG();
+}
+EXPORT_SYMBOL(vm_unmap_ram);
+
+void vm_unmap_aliases(void)
+{
+}
+EXPORT_SYMBOL_GPL(vm_unmap_aliases);
+
 /*
  * Implement a stub for vmalloc_sync_all() if the architecture chose not to
  * have one.
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index 6c1323940263..e9db889d6222 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -62,13 +62,13 @@ struct net_device *vlan_dev_real_dev(const struct net_device *dev)
 {
         return vlan_dev_info(dev)->real_dev;
 }
-EXPORT_SYMBOL_GPL(vlan_dev_real_dev);
+EXPORT_SYMBOL(vlan_dev_real_dev);
 
 u16 vlan_dev_vlan_id(const struct net_device *dev)
 {
         return vlan_dev_info(dev)->vlan_id;
 }
-EXPORT_SYMBOL_GPL(vlan_dev_vlan_id);
+EXPORT_SYMBOL(vlan_dev_vlan_id);
 
 static int vlan_gro_common(struct napi_struct *napi, struct vlan_group *grp,
                            unsigned int vlan_tci, struct sk_buff *skb)
diff --git a/net/Kconfig b/net/Kconfig
index bf2776018f71..cdb8fdef6c4a 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -24,14 +24,6 @@ if NET
 
 menu "Networking options"
 
-config NET_NS
-        bool "Network namespace support"
-        default n
-        depends on EXPERIMENTAL && NAMESPACES
-        help
-          Allow user space to create what appear to be multiple instances
-          of the network stack.
-
 config COMPAT_NET_DEV_OPS
        def_bool y
 
diff --git a/net/key/af_key.c b/net/key/af_key.c
index f8bd8df5e257..7dcbde3ea7d9 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -1285,6 +1285,7 @@ static struct xfrm_state * pfkey_msg2xfrm_state(struct net *net,
                                 ext_hdrs[SADB_X_EXT_NAT_T_DPORT-1];
                         natt->encap_dport = n_port->sadb_x_nat_t_port_port;
                 }
+                memset(&natt->encap_oa, 0, sizeof(natt->encap_oa));
         }
 
         err = xfrm_init_state(x);
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 5ba721b6a399..2b890af01ba4 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -620,8 +620,8 @@ static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
         if (use_short_slot != bss_conf->use_short_slot) {
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
                 if (net_ratelimit()) {
-                        printk(KERN_DEBUG "%s: switched to %s slot"
-                               " (BSSID=%s)\n",
+                        printk(KERN_DEBUG "%s: switched to %s slot time"
+                               " (BSSID=%pM)\n",
                                sdata->dev->name,
                                use_short_slot ? "short" : "long",
                                ifsta->bssid);
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index a4af3a124cce..4278e545638f 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1307,8 +1307,10 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev)
                 if (is_multicast_ether_addr(hdr->addr3))
                         memcpy(hdr->addr1, hdr->addr3, ETH_ALEN);
                 else
-                        if (mesh_nexthop_lookup(skb, osdata))
-                                return  0;
+                        if (mesh_nexthop_lookup(skb, osdata)) {
+                                dev_put(odev);
+                                return 0;
+                        }
                 if (memcmp(odev->dev_addr, hdr->addr4, ETH_ALEN) != 0)
                         IEEE80211_IFSTA_MESH_CTR_INC(&osdata->u.mesh,
                                                             fwded_frames);
diff --git a/net/sctp/input.c b/net/sctp/input.c
index bf612d954d41..2e4a8646dbc3 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -249,6 +249,19 @@ int sctp_rcv(struct sk_buff *skb)
          */
         sctp_bh_lock_sock(sk);
 
+        if (sk != rcvr->sk) {
+                /* Our cached sk is different from the rcvr->sk.  This is
+                 * because migrate()/accept() may have moved the association
+                 * to a new socket and released all the sockets.  So now we
+                 * are holding a lock on the old socket while the user may
+                 * be doing something with the new socket.  Switch our veiw
+                 * of the current sk.
+                 */
+                sctp_bh_unlock_sock(sk);
+                sk = rcvr->sk;
+                sctp_bh_lock_sock(sk);
+        }
+
         if (sock_owned_by_user(sk)) {
                 SCTP_INC_STATS_BH(SCTP_MIB_IN_PKT_BACKLOG);
                 sctp_add_backlog(sk, skb);
diff --git a/net/sctp/output.c b/net/sctp/output.c
index c3f417f7ec6e..73639355157e 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -324,14 +324,16 @@ append:
         switch (chunk->chunk_hdr->type) {
             case SCTP_CID_DATA:
                 retval = sctp_packet_append_data(packet, chunk);
+                if (SCTP_XMIT_OK != retval)
+                        goto finish;
                 /* Disallow SACK bundling after DATA. */
                 packet->has_sack = 1;
                 /* Disallow AUTH bundling after DATA */
                 packet->has_auth = 1;
                 /* Let it be knows that packet has DATA in it */
                 packet->has_data = 1;
-                if (SCTP_XMIT_OK != retval)
-                        goto finish;
+                /* timestamp the chunk for rtx purposes */
+                chunk->sent_at = jiffies;
                 break;
             case SCTP_CID_COOKIE_ECHO:
                 packet->has_cookie_echo = 1;
@@ -470,7 +472,6 @@ int sctp_packet_transmit(struct sctp_packet *packet)
                         } else
                                 chunk->resent = 1;
 
-                        chunk->sent_at = jiffies;
                         has_data = 1;
                 }
 
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index 247ebc95c1e5..bc411c896216 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -929,7 +929,6 @@ static int sctp_outq_flush(struct sctp_outq *q, int rtx_timeout)
                 }
 
                 /* Finally, transmit new packets.  */
-                start_timer = 0;
                 while ((chunk = sctp_outq_dequeue_data(q)) != NULL) {
                         /* RFC 2960 6.5 Every DATA chunk MUST carry a valid
                          * stream identifier.
@@ -1028,7 +1027,7 @@ static int sctp_outq_flush(struct sctp_outq *q, int rtx_timeout)
                         list_add_tail(&chunk->transmitted_list,
                                       &transport->transmitted);
 
-                        sctp_transport_reset_timers(transport, start_timer-1);
+                        sctp_transport_reset_timers(transport, 0);
 
                         q->empty = 0;
 
diff --git a/net/sunrpc/Kconfig b/net/sunrpc/Kconfig
new file mode 100644
index 000000000000..eda4a7aee596
--- /dev/null
+++ b/net/sunrpc/Kconfig
@@ -0,0 +1,79 @@
+config SUNRPC
+        tristate
+
+config SUNRPC_GSS
+        tristate
+
+config SUNRPC_XPRT_RDMA
+        tristate
+        depends on SUNRPC && INFINIBAND && EXPERIMENTAL
+        default SUNRPC && INFINIBAND
+        help
+          This option enables an RPC client transport capability that
+          allows the NFS client to mount servers via an RDMA-enabled
+          transport.
+
+          To compile RPC client RDMA transport support as a module,
+          choose M here: the module will be called xprtrdma.
+
+          If unsure, say N.
+
+config SUNRPC_REGISTER_V4
+        bool "Register local RPC services via rpcbind v4 (EXPERIMENTAL)"
+        depends on SUNRPC && EXPERIMENTAL
+        default n
+        help
+          Sun added support for registering RPC services at an IPv6
+          address by creating two new versions of the rpcbind protocol
+          (RFC 1833).
+
+          This option enables support in the kernel RPC server for
+          registering kernel RPC services via version 4 of the rpcbind
+          protocol.  If you enable this option, you must run a portmapper
+          daemon that supports rpcbind protocol version 4.
+
+          Serving NFS over IPv6 from knfsd (the kernel's NFS server)
+          requires that you enable this option and use a portmapper that
+          supports rpcbind version 4.
+
+          If unsure, say N to get traditional behavior (register kernel
+          RPC services using only rpcbind version 2).  Distributions
+          using the legacy Linux portmapper daemon must say N here.
+
+config RPCSEC_GSS_KRB5
+        tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
+        depends on SUNRPC && EXPERIMENTAL
+        select SUNRPC_GSS
+        select CRYPTO
+        select CRYPTO_MD5
+        select CRYPTO_DES
+        select CRYPTO_CBC
+        help
+          Choose Y here to enable Secure RPC using the Kerberos version 5
+          GSS-API mechanism (RFC 1964).
+
+          Secure RPC calls with Kerberos require an auxiliary user-space
+          daemon which may be found in the Linux nfs-utils package
+          available from http://linux-nfs.org/.  In addition, user-space
+          Kerberos support should be installed.
+
+          If unsure, say N.
+
+config RPCSEC_GSS_SPKM3
+        tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)"
+        depends on SUNRPC && EXPERIMENTAL
+        select SUNRPC_GSS
+        select CRYPTO
+        select CRYPTO_MD5
+        select CRYPTO_DES
+        select CRYPTO_CAST5
+        select CRYPTO_CBC
+        help
+          Choose Y here to enable Secure RPC using the SPKM3 public key
+          GSS-API mechansim (RFC 2025).
+
+          Secure RPC calls with SPKM3 require an auxiliary userspace
+          daemon which may be found in the Linux nfs-utils package
+          available from http://linux-nfs.org/.
+
+          If unsure, say N.
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 5d900307de3e..c7de8b39fcf1 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -151,16 +151,16 @@ cmd_cc_i_c       = $(CPP) $(c_flags)   -o $@ $<
 $(obj)/%.i: $(src)/%.c FORCE
         $(call if_changed_dep,cc_i_c)
 
-cmd_genksyms =                                                              \
+cmd_gensymtypes =                                                           \
     $(CPP) -D__GENKSYMS__ $(c_flags) $< |                                   \
-    $(GENKSYMS) -T $@ -A -a $(ARCH)                                         \
+    $(GENKSYMS) -T $@ -a $(ARCH)                                            \
      $(if $(KBUILD_PRESERVE),-p)                                            \
      $(if $(1),-r $(firstword $(wildcard $(@:.symtypes=.symref) /dev/null)))
 
 quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
 cmd_cc_symtypes_c =                                                         \
     set -e;                                                                 \
-    $(call cmd_genksyms, true) >/dev/null;                                  \
+    $(call cmd_gensymtypes, true) >/dev/null;                               \
     test -s $@ || rm -f $@
 
 $(obj)/%.symtypes : $(src)/%.c FORCE
@@ -177,38 +177,28 @@ cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
 
 else
 # When module versioning is enabled the following steps are executed:
-# o compile a .tmp_<file>.s from <file>.c
-# o if .tmp_<file>.s doesn't contain a __ksymtab version, i.e. does
-#   not export symbols, we just assemble .tmp_<file>.s to <file>.o and
+# o compile a .tmp_<file>.o from <file>.c
+# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does
+#   not export symbols, we just rename .tmp_<file>.o to <file>.o and
 #   are done.
 # o otherwise, we calculate symbol versions using the good old
 #   genksyms on the preprocessed source and postprocess them in a way
-#   that they are usable as assembly source
-# o assemble <file>.o from .tmp_<file>.s forcing inclusion of directives
-#   defining the actual values of __crc_*, followed by objcopy-ing them
-#   to force these symbols to be local to permit stripping them later.
-s_file = $(@D)/.tmp_$(@F:.o=.s)
-v_file = $(@D)/.tmp_$(@F:.o=.v)
-tmp_o_file = $(@D)/.tmp_$(@F)
-no_g_c_flags = $(filter-out -g%,$(c_flags))
-
-cmd_cc_o_c = $(CC) $(c_flags) -S -o $(s_file) $<
+#   that they are usable as a linker script
+# o generate <file>.o from .tmp_<file>.o using the linker to
+#   replace the unresolved symbols __crc_exported_symbol with
+#   the actual value of the checksum generated by genksyms
 
+cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
 cmd_modversions =                                                       \
-        if grep -q __ksymtab $(s_file); then                            \
-                if $(call cmd_genksyms, $(KBUILD_SYMTYPES)) > $(v_file) \
-                   && $(CC) $(no_g_c_flags) -c -Wa,$(v_file)            \
-                            -o $(tmp_o_file) $(s_file)                  \
-                   && $(OBJCOPY) -L '__crc_*' -L '___crc_*' -w          \
-                                 $(tmp_o_file) $@;                      \
-                then                                                    \
-                        : ;                                             \
-                else                                                    \
-                        rm -f $@; exit 1;                               \
-                fi;                                                     \
+        if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then     \
+                $(call cmd_gensymtypes, $(KBUILD_SYMTYPES))             \
+                    > $(@D)/.tmp_$(@F:.o=.ver);                         \
+                                                                        \
+                $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F)              \
+                        -T $(@D)/.tmp_$(@F:.o=.ver);                    \
+                rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver);        \
         else                                                            \
-                rm -f $(v_file);                                        \
-                $(CC) $(no_g_c_flags) -c -o $@ $(s_file);               \
+                mv -f $(@D)/.tmp_$(@F) $@;                              \
         fi;
 endif
 
@@ -225,12 +215,7 @@ define rule_cc_o_c
         $(cmd_record_mcount)                                              \
         scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' >    \
                                                       $(dot-target).tmp;  \
-        if [ -r $(@D)/.tmp_$(@F:.o=.v) ]; then                            \
-                echo >> $(dot-target).tmp;                                \
-                echo '$@: $(GENKSYMS)' >> $(dot-target).tmp;              \
-                echo '$(GENKSYMS):: ;' >> $(dot-target).tmp;              \
-        fi;                                                               \
-        rm -f $(depfile) $(@D)/.tmp_$(@F:.o=.?);                          \
+        rm -f $(depfile);                                                 \
         mv -f $(dot-target).tmp $(dot-target).cmd
 endef
 
diff --git a/scripts/Makefile.modinst b/scripts/Makefile.modinst
index a5122dce1264..efa5d940e632 100644
--- a/scripts/Makefile.modinst
+++ b/scripts/Makefile.modinst
@@ -17,8 +17,7 @@ __modinst: $(modules)
         @:
 
 quiet_cmd_modules_install = INSTALL $@
-      cmd_modules_install = mkdir -p $(2); \
-                            $(mod_strip_cmd) $@ $(2)/$(notdir $@) || cp $@ $(2)
+      cmd_modules_install = mkdir -p $(2); cp $@ $(2) ; $(mod_strip_cmd) $(2)/$(notdir $@)
 
 # Modules built outside the kernel source tree go into extra by default
 INSTALL_MOD_DIR ?= extra
diff --git a/scripts/config b/scripts/config
index 68b9761cdc38..db6084b78a10 100755
--- a/scripts/config
+++ b/scripts/config
@@ -60,6 +60,10 @@ else
         FN=.config
 fi
 
+if [ "$1" = "" ] ; then
+        usage
+fi
+
 while [ "$1" != "" ] ; do
         CMD="$1"
         shift
diff --git a/scripts/genksyms/genksyms.c b/scripts/genksyms/genksyms.c
index f8bb4cabd62d..3a8297b5184c 100644
--- a/scripts/genksyms/genksyms.c
+++ b/scripts/genksyms/genksyms.c
@@ -43,7 +43,7 @@ int cur_line = 1;
 char *cur_filename;
 
 static int flag_debug, flag_dump_defs, flag_reference, flag_dump_types,
-           flag_preserve, flag_warnings, flag_asm;
+           flag_preserve, flag_warnings;
 static const char *arch = "";
 static const char *mod_prefix = "";
 
@@ -610,11 +610,8 @@ void export_symbol(const char *name)
                 if (flag_dump_defs)
                         fputs(">\n", debugfile);
 
-                /* Used as assembly source or a linker script. */
-                printf(flag_asm
-                       ? ".equiv %s__crc_%s, %#08lx\n"
-                       : "%s__crc_%s = %#08lx ;\n",
-                       mod_prefix, name, crc);
+                /* Used as a linker script. */
+                printf("%s__crc_%s = 0x%08lx ;\n", mod_prefix, name, crc);
         }
 }
 
@@ -651,10 +648,9 @@ void error_with_pos(const char *fmt, ...)
 
 static void genksyms_usage(void)
 {
-        fputs("Usage:\n" "genksyms [-aAdDTwqhV] > /path/to/.tmp_obj.ver\n" "\n"
+        fputs("Usage:\n" "genksyms [-adDTwqhV] > /path/to/.tmp_obj.ver\n" "\n"
 #ifdef __GNU_LIBRARY__
               "  -a, --arch            Select architecture\n"
-              "  -A, --asm             Generate assembly rather than linker script\n"
               "  -d, --debug           Increment the debug level (repeatable)\n"
               "  -D, --dump            Dump expanded symbol defs (for debugging only)\n"
               "  -r, --reference file  Read reference symbols from a file\n"
@@ -666,7 +662,6 @@ static void genksyms_usage(void)
               "  -V, --version         Print the release version\n"
 #else                           /* __GNU_LIBRARY__ */
               "  -a                    Select architecture\n"
-              "  -A                    Generate assembly rather than linker script\n"
               "  -d                    Increment the debug level (repeatable)\n"
               "  -D                    Dump expanded symbol defs (for debugging only)\n"
               "  -r file               Read reference symbols from a file\n"
@@ -688,7 +683,6 @@ int main(int argc, char **argv)
 #ifdef __GNU_LIBRARY__
         struct option long_opts[] = {
                 {"arch", 1, 0, 'a'},
-                {"asm", 0, 0, 'A'},
                 {"debug", 0, 0, 'd'},
                 {"warnings", 0, 0, 'w'},
                 {"quiet", 0, 0, 'q'},
@@ -701,10 +695,10 @@ int main(int argc, char **argv)
                 {0, 0, 0, 0}
         };
 
-        while ((o = getopt_long(argc, argv, "a:dwqVADr:T:ph",
+        while ((o = getopt_long(argc, argv, "a:dwqVDr:T:ph",
                                 &long_opts[0], NULL)) != EOF)
 #else                           /* __GNU_LIBRARY__ */
-        while ((o = getopt(argc, argv, "a:dwqVADr:T:ph")) != EOF)
+        while ((o = getopt(argc, argv, "a:dwqVDr:T:ph")) != EOF)
 #endif                          /* __GNU_LIBRARY__ */
                 switch (o) {
                 case 'a':
@@ -722,9 +716,6 @@ int main(int argc, char **argv)
                 case 'V':
                         fputs("genksyms version 2.5.60\n", stderr);
                         break;
-                case 'A':
-                        flag_asm = 1;
-                        break;
                 case 'D':
                         flag_dump_defs = 1;
                         break;
diff --git a/scripts/genksyms/keywords.c_shipped b/scripts/genksyms/keywords.c_shipped
index 83484fe93ede..971e0113ae7a 100644
--- a/scripts/genksyms/keywords.c_shipped
+++ b/scripts/genksyms/keywords.c_shipped
@@ -1,4 +1,4 @@
-/* ANSI-C code produced by gperf version 3.0.1 */
+/* ANSI-C code produced by gperf version 3.0.2 */
 /* Command-line: gperf -L ANSI-C -a -C -E -g -H is_reserved_hash -k '1,3,$' -N is_reserved_word -p -t scripts/genksyms/keywords.gperf  */
 
 #if !((' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \
@@ -32,7 +32,7 @@
 
 #line 3 "scripts/genksyms/keywords.gperf"
 struct resword { const char *name; int token; };
-/* maximum key range = 64, duplicates = 0 */
+/* maximum key range = 62, duplicates = 0 */
 
 #ifdef __GNUC__
 __inline
@@ -46,32 +46,32 @@ is_reserved_hash (register const char *str, register unsigned int len)
 {
   static const unsigned char asso_values[] =
     {
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67,  0,
-      67, 67, 67, 67, 67, 67, 15, 67, 67, 67,
-       0, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67,  0, 67,  0, 67,  5,
-      25, 20, 15, 30, 67, 15, 67, 67, 10,  0,
-      10, 40, 20, 67, 10,  5,  0, 10, 15, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65,  5,
+      65, 65, 65, 65, 65, 65, 35, 65, 65, 65,
+       0, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65,  0, 65,  0, 65,  5,
+      20, 15, 10, 30, 65, 15, 65, 65, 20,  0,
+      10, 35, 20, 65, 10,  5,  0, 10,  5, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65
     };
   return len + asso_values[(unsigned char)str[2]] + asso_values[(unsigned char)str[0]] + asso_values[(unsigned char)str[len - 1]];
 }
@@ -84,119 +84,116 @@ is_reserved_word (register const char *str, register unsigned int len)
 {
   enum
     {
-      TOTAL_KEYWORDS = 45,
+      TOTAL_KEYWORDS = 43,
       MIN_WORD_LENGTH = 3,
       MAX_WORD_LENGTH = 24,
       MIN_HASH_VALUE = 3,
-      MAX_HASH_VALUE = 66
+      MAX_HASH_VALUE = 64
     };
 
   static const struct resword wordlist[] =
     {
       {""}, {""}, {""},
-#line 28 "scripts/genksyms/keywords.gperf"
+#line 26 "scripts/genksyms/keywords.gperf"
       {"asm", ASM_KEYW},
       {""},
-#line 10 "scripts/genksyms/keywords.gperf"
+#line 8 "scripts/genksyms/keywords.gperf"
       {"__asm", ASM_KEYW},
       {""},
-#line 11 "scripts/genksyms/keywords.gperf"
+#line 9 "scripts/genksyms/keywords.gperf"
       {"__asm__", ASM_KEYW},
       {""}, {""},
-#line 54 "scripts/genksyms/keywords.gperf"
+#line 52 "scripts/genksyms/keywords.gperf"
       {"__typeof__", TYPEOF_KEYW},
       {""},
-#line 14 "scripts/genksyms/keywords.gperf"
+#line 12 "scripts/genksyms/keywords.gperf"
       {"__const", CONST_KEYW},
-#line 13 "scripts/genksyms/keywords.gperf"
+#line 11 "scripts/genksyms/keywords.gperf"
       {"__attribute__", ATTRIBUTE_KEYW},
-#line 15 "scripts/genksyms/keywords.gperf"
+#line 13 "scripts/genksyms/keywords.gperf"
       {"__const__", CONST_KEYW},
-#line 20 "scripts/genksyms/keywords.gperf"
+#line 18 "scripts/genksyms/keywords.gperf"
       {"__signed__", SIGNED_KEYW},
-#line 46 "scripts/genksyms/keywords.gperf"
+#line 44 "scripts/genksyms/keywords.gperf"
       {"static", STATIC_KEYW},
-      {""},
-#line 41 "scripts/genksyms/keywords.gperf"
+#line 20 "scripts/genksyms/keywords.gperf"
+      {"__volatile__", VOLATILE_KEYW},
+#line 39 "scripts/genksyms/keywords.gperf"
       {"int", INT_KEYW},
-#line 34 "scripts/genksyms/keywords.gperf"
+#line 32 "scripts/genksyms/keywords.gperf"
       {"char", CHAR_KEYW},
-#line 35 "scripts/genksyms/keywords.gperf"
+#line 33 "scripts/genksyms/keywords.gperf"
       {"const", CONST_KEYW},
-#line 47 "scripts/genksyms/keywords.gperf"
+#line 45 "scripts/genksyms/keywords.gperf"
       {"struct", STRUCT_KEYW},
-#line 26 "scripts/genksyms/keywords.gperf"
+#line 24 "scripts/genksyms/keywords.gperf"
       {"__restrict__", RESTRICT_KEYW},
-#line 27 "scripts/genksyms/keywords.gperf"
-      {"restrict", RESTRICT_KEYW},
-#line 7 "scripts/genksyms/keywords.gperf"
-      {"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW},
-#line 18 "scripts/genksyms/keywords.gperf"
-      {"__inline__", INLINE_KEYW},
-      {""},
-#line 22 "scripts/genksyms/keywords.gperf"
-      {"__volatile__", VOLATILE_KEYW},
-#line 5 "scripts/genksyms/keywords.gperf"
-      {"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW},
 #line 25 "scripts/genksyms/keywords.gperf"
+      {"restrict", RESTRICT_KEYW},
+#line 23 "scripts/genksyms/keywords.gperf"
       {"_restrict", RESTRICT_KEYW},
-      {""},
-#line 12 "scripts/genksyms/keywords.gperf"
-      {"__attribute", ATTRIBUTE_KEYW},
-#line 6 "scripts/genksyms/keywords.gperf"
-      {"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW},
 #line 16 "scripts/genksyms/keywords.gperf"
+      {"__inline__", INLINE_KEYW},
+#line 10 "scripts/genksyms/keywords.gperf"
+      {"__attribute", ATTRIBUTE_KEYW},
+      {""},
+#line 14 "scripts/genksyms/keywords.gperf"
       {"__extension__", EXTENSION_KEYW},
-#line 37 "scripts/genksyms/keywords.gperf"
+#line 35 "scripts/genksyms/keywords.gperf"
       {"enum", ENUM_KEYW},
-#line 8 "scripts/genksyms/keywords.gperf"
-      {"EXPORT_UNUSED_SYMBOL", EXPORT_SYMBOL_KEYW},
-#line 38 "scripts/genksyms/keywords.gperf"
+#line 19 "scripts/genksyms/keywords.gperf"
+      {"__volatile", VOLATILE_KEYW},
+#line 36 "scripts/genksyms/keywords.gperf"
       {"extern", EXTERN_KEYW},
       {""},
-#line 19 "scripts/genksyms/keywords.gperf"
+#line 17 "scripts/genksyms/keywords.gperf"
       {"__signed", SIGNED_KEYW},
-#line 9 "scripts/genksyms/keywords.gperf"
-      {"EXPORT_UNUSED_SYMBOL_GPL", EXPORT_SYMBOL_KEYW},
-#line 49 "scripts/genksyms/keywords.gperf"
-      {"union", UNION_KEYW},
-#line 53 "scripts/genksyms/keywords.gperf"
+#line 7 "scripts/genksyms/keywords.gperf"
+      {"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW},
+      {""},
+#line 51 "scripts/genksyms/keywords.gperf"
       {"typeof", TYPEOF_KEYW},
-#line 48 "scripts/genksyms/keywords.gperf"
+#line 46 "scripts/genksyms/keywords.gperf"
       {"typedef", TYPEDEF_KEYW},
-#line 17 "scripts/genksyms/keywords.gperf"
+#line 15 "scripts/genksyms/keywords.gperf"
       {"__inline", INLINE_KEYW},
-#line 33 "scripts/genksyms/keywords.gperf"
+#line 31 "scripts/genksyms/keywords.gperf"
       {"auto", AUTO_KEYW},
-#line 21 "scripts/genksyms/keywords.gperf"
-      {"__volatile", VOLATILE_KEYW},
+#line 47 "scripts/genksyms/keywords.gperf"
+      {"union", UNION_KEYW},
       {""}, {""},
-#line 50 "scripts/genksyms/keywords.gperf"
+#line 48 "scripts/genksyms/keywords.gperf"
       {"unsigned", UNSIGNED_KEYW},
-      {""},
-#line 44 "scripts/genksyms/keywords.gperf"
+#line 49 "scripts/genksyms/keywords.gperf"
+      {"void", VOID_KEYW},
+#line 42 "scripts/genksyms/keywords.gperf"
       {"short", SHORT_KEYW},
-#line 40 "scripts/genksyms/keywords.gperf"
+      {""}, {""},
+#line 50 "scripts/genksyms/keywords.gperf"
+      {"volatile", VOLATILE_KEYW},
+      {""},
+#line 37 "scripts/genksyms/keywords.gperf"
+      {"float", FLOAT_KEYW},
+#line 34 "scripts/genksyms/keywords.gperf"
+      {"double", DOUBLE_KEYW},
+      {""},
+#line 5 "scripts/genksyms/keywords.gperf"
+      {"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW},
+      {""}, {""},
+#line 38 "scripts/genksyms/keywords.gperf"
       {"inline", INLINE_KEYW},
+#line 6 "scripts/genksyms/keywords.gperf"
+      {"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW},
+#line 41 "scripts/genksyms/keywords.gperf"
+      {"register", REGISTER_KEYW},
       {""},
-#line 52 "scripts/genksyms/keywords.gperf"
-      {"volatile", VOLATILE_KEYW},
-#line 42 "scripts/genksyms/keywords.gperf"
-      {"long", LONG_KEYW},
-#line 24 "scripts/genksyms/keywords.gperf"
+#line 22 "scripts/genksyms/keywords.gperf"
       {"_Bool", BOOL_KEYW},
-      {""}, {""},
 #line 43 "scripts/genksyms/keywords.gperf"
-      {"register", REGISTER_KEYW},
-#line 51 "scripts/genksyms/keywords.gperf"
-      {"void", VOID_KEYW},
-#line 39 "scripts/genksyms/keywords.gperf"
-      {"float", FLOAT_KEYW},
-#line 36 "scripts/genksyms/keywords.gperf"
-      {"double", DOUBLE_KEYW},
-      {""}, {""}, {""}, {""},
-#line 45 "scripts/genksyms/keywords.gperf"
-      {"signed", SIGNED_KEYW}
+      {"signed", SIGNED_KEYW},
+      {""}, {""},
+#line 40 "scripts/genksyms/keywords.gperf"
+      {"long", LONG_KEYW}
     };
 
   if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH)
diff --git a/scripts/genksyms/keywords.gperf b/scripts/genksyms/keywords.gperf
index 8abe7ab8d88f..5ef3733225fb 100644
--- a/scripts/genksyms/keywords.gperf
+++ b/scripts/genksyms/keywords.gperf
@@ -5,8 +5,6 @@ struct resword { const char *name; int token; }
 EXPORT_SYMBOL, EXPORT_SYMBOL_KEYW
 EXPORT_SYMBOL_GPL, EXPORT_SYMBOL_KEYW
 EXPORT_SYMBOL_GPL_FUTURE, EXPORT_SYMBOL_KEYW
-EXPORT_UNUSED_SYMBOL, EXPORT_SYMBOL_KEYW
-EXPORT_UNUSED_SYMBOL_GPL, EXPORT_SYMBOL_KEYW
 __asm, ASM_KEYW
 __asm__, ASM_KEYW
 __attribute, ATTRIBUTE_KEYW
diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index 92758120a767..ad2434b26970 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -130,9 +130,18 @@ static int read_symbol(FILE *in, struct sym_entry *s)
 static int symbol_valid(struct sym_entry *s)
 {
         /* Symbols which vary between passes.  Passes 1 and 2 must have
-         * identical symbol lists.
+         * identical symbol lists.  The kallsyms_* symbols below are only added
+         * after pass 1, they would be included in pass 2 when --all-symbols is
+         * specified so exclude them to get a stable symbol list.
          */
         static char *special_symbols[] = {
+                "kallsyms_addresses",
+                "kallsyms_num_syms",
+                "kallsyms_names",
+                "kallsyms_markers",
+                "kallsyms_token_table",
+                "kallsyms_token_index",
+
         /* Exclude linker generated symbols which vary between passes */
                 "_SDA_BASE_",           /* ppc */
                 "_SDA2_BASE_",          /* ppc */
@@ -164,9 +173,7 @@ static int symbol_valid(struct sym_entry *s)
         }
 
         /* Exclude symbols which vary between passes. */
-        if (strstr((char *)s->sym + offset, "_compiled.") ||
-            strncmp((char*)s->sym + offset, "__compound_literal.", 19) == 0 ||
-            strncmp((char*)s->sym + offset, "__compound_literal$", 19) == 0)
+        if (strstr((char *)s->sym + offset, "_compiled."))
                 return 0;
 
         for (i = 0; special_symbols[i]; i++)
@@ -543,10 +550,8 @@ int main(int argc, char **argv)
                 usage();
 
         read_map(stdin);
-        if (table_cnt) {
-                sort_symbols();
-                optimize_token_table();
-        }
+        sort_symbols();
+        optimize_token_table();
         write_src();
 
         return 0;
diff --git a/scripts/mksysmap b/scripts/mksysmap
index 1db316a3712b..6e133a0bae7a 100644
--- a/scripts/mksysmap
+++ b/scripts/mksysmap
@@ -37,6 +37,9 @@
 
 # readprofile starts reading symbols when _stext is found, and
 # continue until it finds a symbol which is not either of 'T', 't',
-# 'W' or 'w'.
+# 'W' or 'w'. __crc_ are 'A' and placed in the middle
+# so we just ignore them to let readprofile continue to work.
+# (At least sparc64 has __crc_ in the middle).
+
+$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $2
 
-$NM -n $1 | grep -v '\( [aNUw] \)\|\( \$[adt]\)' > $2
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index d4dc222a74f3..491b8b1b6abf 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -366,11 +366,17 @@ static void do_pnp_device_entry(void *symval, unsigned long size,
 
         for (i = 0; i < count; i++) {
                 const char *id = (char *)devs[i].id;
+                char acpi_id[sizeof(devs[0].id)];
+                int j;
 
                 buf_printf(&mod->dev_table_buf,
                            "MODULE_ALIAS(\"pnp:d%s*\");\n", id);
+
+                /* fix broken pnp bus lowercasing */
+                for (j = 0; j < sizeof(acpi_id); j++)
+                        acpi_id[j] = toupper(id[j]);
                 buf_printf(&mod->dev_table_buf,
-                           "MODULE_ALIAS(\"acpi*:%s:*\");\n", id);
+                           "MODULE_ALIAS(\"acpi*:%s:*\");\n", acpi_id);
         }
 }
 
@@ -416,10 +422,17 @@ static void do_pnp_card_entries(void *symval, unsigned long size,
 
                         /* add an individual alias for every device entry */
                         if (!dup) {
+                                char acpi_id[sizeof(card->devs[0].id)];
+                                int k;
+
                                 buf_printf(&mod->dev_table_buf,
                                            "MODULE_ALIAS(\"pnp:d%s*\");\n", id);
+
+                                /* fix broken pnp bus lowercasing */
+                                for (k = 0; k < sizeof(acpi_id); k++)
+                                        acpi_id[k] = toupper(id[k]);
                                 buf_printf(&mod->dev_table_buf,
-                                           "MODULE_ALIAS(\"acpi*:%s:*\");\n", id);
+                                           "MODULE_ALIAS(\"acpi*:%s:*\");\n", acpi_id);
                         }
                 }
         }
diff --git a/scripts/strip-symbols b/scripts/strip-symbols
deleted file mode 100644
index 29ee8c1a014b..000000000000
--- a/scripts/strip-symbols
+++ /dev/null
@@ -1,22 +0,0 @@
-<*>
-*.h
-__compound_literal[$.][0-9]*
-__crc_[a-zA-Z_]*
-__exitcall_[a-zA-Z_]*
-__func__[$.][0-9]*
-__FUNCTION__[$.][0-9]*
-gcc[0-9]_compiled[$.]
-__initcall_[a-zA-Z_]*
-__kcrctab_[a-zA-Z_]*
-__kstrtab_[a-zA-Z_]*
-__ksymtab_[a-zA-Z_]*
-__mod_[a-zA-Z_]*[0-9]
-__module_depends
-__param_[a-zA-Z_]*
-__pci_fixup_*PCI_ANY_IDPCI_ANY_ID*
-__pci_fixup_*PCI_ANY_IDPCI_DEVICE_ID_*
-__pci_fixup_*PCI_VENDOR_ID_*PCI_ANY_ID*
-__pci_fixup_*PCI_VENDOR_ID_*PCI_DEVICE_ID_*
-__PRETTY_FUNCTION__[$.][0-9]*
-__setup_[a-zA-Z_]*
-____versions
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 6e3a1848447c..82b9bddcdcd6 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -744,8 +744,8 @@ config SND_VIRTUOSO
         select SND_OXYGEN_LIB
         help
           Say Y here to include support for sound cards based on the
-          Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X and
-          HDAV1.3 (Deluxe).
+          Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2 and D2X.
+          Support for the HDAV1.3 (Deluxe) is very experimental.
 
           To compile this driver as a module, choose M here: the module
           will be called snd-virtuoso.
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 82dd08431970..5d249a547fbf 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8478,6 +8478,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
         SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_ASUS_EEE1601),
         SND_PCI_QUIRK(0x105b, 0x0ce8, "Foxconn P35AX-S", ALC883_6ST_DIG),
         SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC883_6ST_DIG),
+        SND_PCI_QUIRK(0x1071, 0x8227, "Mitac 82801H", ALC883_MITAC),
         SND_PCI_QUIRK(0x1071, 0x8253, "Mitac 8252d", ALC883_MITAC),
         SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD),
         SND_PCI_QUIRK(0x10f1, 0x2350, "TYAN-S2350", ALC888_6ST_DELL),
@@ -8526,6 +8527,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
         SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66),
         SND_PCI_QUIRK(0x8086, 0x0001, "DG33BUC", ALC883_3ST_6ch_INTEL),
         SND_PCI_QUIRK(0x8086, 0x0002, "DG33FBC", ALC883_3ST_6ch_INTEL),
+        SND_PCI_QUIRK(0x8086, 0x2503, "82801H", ALC883_MITAC),
         SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC883_3ST_6ch_INTEL),
         SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch),
         {}
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index c39deebb588f..3dd4eee70b7c 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -81,6 +81,7 @@ enum {
 
 enum {
         STAC_92HD83XXX_REF,
+        STAC_92HD83XXX_PWR_REF,
         STAC_92HD83XXX_MODELS
 };
 
@@ -334,7 +335,7 @@ static hda_nid_t stac92hd83xxx_slave_dig_outs[2] = {
 };
 
 static unsigned int stac92hd83xxx_pwr_mapping[4] = {
-        0x03, 0x0c, 0x10, 0x40,
+        0x03, 0x0c, 0x20, 0x40,
 };
 
 static hda_nid_t stac92hd83xxx_amp_nids[1] = {
@@ -841,10 +842,6 @@ static struct hda_verb stac92hd73xx_10ch_core_init[] = {
 };
 
 static struct hda_verb stac92hd83xxx_core_init[] = {
-        /* start of config #1 */
-        { 0xe, AC_VERB_SET_CONNECT_SEL, 0x3},
-
-        /* start of config #2 */
         { 0xa, AC_VERB_SET_CONNECT_SEL, 0x0},
         { 0xb, AC_VERB_SET_CONNECT_SEL, 0x0},
         { 0xd, AC_VERB_SET_CONNECT_SEL, 0x1},
@@ -885,8 +882,8 @@ static struct hda_verb stac92hd71bxx_analog_core_init[] = {
 static struct hda_verb stac925x_core_init[] = {
         /* set dac0mux for dac converter */
         { 0x06, AC_VERB_SET_CONNECT_SEL, 0x00},
-        /* unmute and set max the selector */
-        { 0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb01f },
+        /* mute the master volume */
+        { 0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
         {}
 };
 
@@ -1138,6 +1135,8 @@ static struct snd_kcontrol_new stac92hd71bxx_mixer[] = {
 };
 
 static struct snd_kcontrol_new stac925x_mixer[] = {
+        HDA_CODEC_VOLUME("Master Playback Volume", 0x0e, 0, HDA_OUTPUT),
+        HDA_CODEC_MUTE("Master Playback Switch", 0x0e, 0, HDA_OUTPUT),
         STAC_INPUT_SOURCE(1),
         HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_OUTPUT),
         HDA_CODEC_MUTE("Capture Switch", 0x14, 0, HDA_OUTPUT),
@@ -1736,10 +1735,12 @@ static unsigned int ref92hd83xxx_pin_configs[14] = {
 
 static unsigned int *stac92hd83xxx_brd_tbl[STAC_92HD83XXX_MODELS] = {
         [STAC_92HD83XXX_REF] = ref92hd83xxx_pin_configs,
+        [STAC_92HD83XXX_PWR_REF] = ref92hd83xxx_pin_configs,
 };
 
 static const char *stac92hd83xxx_models[STAC_92HD83XXX_MODELS] = {
         [STAC_92HD83XXX_REF] = "ref",
+        [STAC_92HD83XXX_PWR_REF] = "mic-ref",
 };
 
 static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = {
@@ -1799,6 +1800,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
                       "HP dv5", STAC_HP_M4),
         SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f4,
                       "HP dv7", STAC_HP_M4),
+        SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f7,
+                      "HP dv4", STAC_HP_DV5),
         SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fc,
                       "HP dv7", STAC_HP_M4),
         SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3603,
@@ -3573,13 +3576,12 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out
                 err = stac92xx_auto_fill_dac_nids(codec);
                 if (err < 0)
                         return err;
+                err = stac92xx_auto_create_multi_out_ctls(codec,
+                                                          &spec->autocfg);
+                if (err < 0)
+                        return err;
         }
 
-        err = stac92xx_auto_create_multi_out_ctls(codec, &spec->autocfg);
-
-        if (err < 0)
-                return err;
-
         /* setup analog beep controls */
         if (spec->anabeep_nid > 0) {
                 err = stac92xx_auto_create_beep_ctls(codec,
@@ -4753,7 +4755,9 @@ static struct hda_input_mux stac92hd83xxx_dmux = {
 static int patch_stac92hd83xxx(struct hda_codec *codec)
 {
         struct sigmatel_spec *spec;
+        hda_nid_t conn[STAC92HD83_DAC_COUNT + 1];
         int err;
+        int num_dacs;
 
         spec  = kzalloc(sizeof(*spec), GFP_KERNEL);
         if (spec == NULL)
@@ -4772,15 +4776,16 @@ static int patch_stac92hd83xxx(struct hda_codec *codec)
         spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids);
         spec->multiout.dac_nids = spec->dac_nids;
 
-        spec->init = stac92hd83xxx_core_init;
-        switch (codec->vendor_id) {
-        case 0x111d7605:
-                break;
-        default:
-                spec->num_pwrs--;
-                spec->init++; /* switch to config #2 */
-        }
 
+        /* set port 0xe to select the last DAC
+         */
+        num_dacs = snd_hda_get_connections(codec, 0x0e,
+                conn, STAC92HD83_DAC_COUNT + 1) - 1;
+
+        snd_hda_codec_write_cache(codec, 0xe, 0,
+                AC_VERB_SET_CONNECT_SEL, num_dacs);
+
+        spec->init = stac92hd83xxx_core_init;
         spec->mixer = stac92hd83xxx_mixer;
         spec->num_pins = ARRAY_SIZE(stac92hd83xxx_pin_nids);
         spec->num_dmuxes = ARRAY_SIZE(stac92hd83xxx_dmux_nids);
@@ -4806,6 +4811,15 @@ again:
                 return err;
         }
 
+        switch (codec->vendor_id) {
+        case 0x111d7604:
+        case 0x111d7605:
+                if (spec->board_config == STAC_92HD83XXX_PWR_REF)
+                        break;
+                spec->num_pwrs = 0;
+                break;
+        }
+
         err = stac92xx_parse_auto_config(codec, 0x1d, 0);
         if (!err) {
                 if (spec->board_config < 0) {
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index e9e829e83d7a..18c7c91786bc 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -683,7 +683,7 @@ static void xonar_hdav_uart_input(struct oxygen *chip)
         if (chip->uart_input_count >= 2 &&
             chip->uart_input[chip->uart_input_count - 2] == 'O' &&
             chip->uart_input[chip->uart_input_count - 1] == 'K') {
-                printk(KERN_DEBUG "message from Xonar HDAV HDMI chip received:");
+                printk(KERN_DEBUG "message from Xonar HDAV HDMI chip received:\n");
                 print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
                                      chip->uart_input, chip->uart_input_count);
                 chip->uart_input_count = 0;
@@ -908,6 +908,7 @@ static const struct oxygen_model model_xonar_hdav = {
         .dac_channels = 8,
         .dac_volume_min = 0x0f,
         .dac_volume_max = 0xff,
+        .misc_flags = OXYGEN_MISC_MIDI,
         .function_flags = OXYGEN_FUNCTION_2WIRE,
         .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
         .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c
index 1fac5efd285b..3dcdc4e3cfa0 100644
--- a/sound/soc/atmel/atmel-pcm.c
+++ b/sound/soc/atmel/atmel-pcm.c
@@ -44,8 +44,6 @@
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 
-#include <mach/hardware.h>
-
 #include "atmel-pcm.h"
 
 
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index bcec3f60bad9..acf39a646b2f 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -183,16 +183,6 @@ static struct snd_soc_ops mpc8610_hpcd_ops = {
 };
 
 /**
- * mpc8610_hpcd_machine: ASoC machine data
- */
-static struct snd_soc_card mpc8610_hpcd_machine = {
-        .probe = mpc8610_hpcd_machine_probe,
-        .remove = mpc8610_hpcd_machine_remove,
-        .name = "MPC8610 HPCD",
-        .num_links = 1,
-};
-
-/**
  * mpc8610_hpcd_probe: OF probe function for the fabric driver
  *
  * This function gets called when an SSI node is found in the device tree.
@@ -455,7 +445,11 @@ static int mpc8610_hpcd_probe(struct of_device *ofdev,
         machine_data->dai.codec_dai = &cs4270_dai; /* The codec_dai we want */
         machine_data->dai.ops = &mpc8610_hpcd_ops;
 
-        mpc8610_hpcd_machine.dai_link = &machine_data->dai;
+        machine_data->machine.probe = mpc8610_hpcd_machine_probe;
+        machine_data->machine.remove = mpc8610_hpcd_machine_remove;
+        machine_data->machine.name = "MPC8610 HPCD";
+        machine_data->machine.num_links = 1;
+        machine_data->machine.dai_link = &machine_data->dai;
 
         /* Allocate a new audio platform device structure */
         sound_device = platform_device_alloc("soc-audio", -1);
@@ -465,7 +459,7 @@ static int mpc8610_hpcd_probe(struct of_device *ofdev,
                 goto error;
         }
 
-        machine_data->sound_devdata.card = &mpc8610_hpcd_machine;
+        machine_data->sound_devdata.card = &machine_data->machine;
         machine_data->sound_devdata.codec_dev = &soc_codec_device_cs4270;
         machine_data->machine.platform = &fsl_soc_platform;