Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: update multi-touch protocol documentation
  Input: add the ABS_MT_PRESSURE event
  Input: winbond-cir - remove dmesg spam
  Input: lifebook - add another Lifebook DMI signature
  Input: ad7879 - support auxiliary GPIOs via gpiolib

7 files changed, 198 insertions, 69 deletions

diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index a12ea3b586e6..8490480ce432 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -27,12 +27,30 @@ set of events/packets.
 
 A set of ABS_MT events with the desired properties is defined. The events
 are divided into categories, to allow for partial implementation.  The
-minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
-ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked.  If the
-device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
-of the approaching finger. Anisotropy and direction may be specified with
-ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION.  The
-ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which
+allows for multiple fingers to be tracked.  If the device supports it, the
+ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size
+of the contact area and approaching finger, respectively.
+
+The TOUCH and WIDTH parameters have a geometrical interpretation; imagine
+looking through a window at someone gently holding a finger against the
+glass.  You will see two regions, one inner region consisting of the part
+of the finger actually touching the glass, and one outer region formed by
+the perimeter of the finger. The diameter of the inner region is the
+ABS_MT_TOUCH_MAJOR, the diameter of the outer region is
+ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder
+against the glass. The inner region will increase, and in general, the
+ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than
+unity, is related to the finger pressure. For pressure-based devices,
+ABS_MT_PRESSURE may be used to provide the pressure on the contact area
+instead.
+
+In addition to the MAJOR parameters, the oval shape of the finger can be
+described by adding the MINOR parameters, such that MAJOR and MINOR are the
+major and minor axis of an ellipse. Finally, the orientation of the oval
+shape can be describe with the ORIENTATION parameter.
+
+The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
 finger or a pen or something else.  Devices with more granular information
 may specify general shapes as blobs, i.e., as a sequence of rectangular
 shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
@@ -42,11 +60,9 @@ report finger tracking from hardware [5].
 Here is what a minimal event sequence for a two-finger touch would look
 like:
 
-   ABS_MT_TOUCH_MAJOR
    ABS_MT_POSITION_X
    ABS_MT_POSITION_Y
    SYN_MT_REPORT
-   ABS_MT_TOUCH_MAJOR
    ABS_MT_POSITION_X
    ABS_MT_POSITION_Y
    SYN_MT_REPORT
@@ -87,6 +103,12 @@ the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
 the notion of pressure. The fingers of the hand and the palm all have
 different characteristic widths [1].
 
+ABS_MT_PRESSURE
+
+The pressure, in arbitrary units, on the contact area. May be used instead
+of TOUCH and WIDTH for pressure-based devices or any device with a spatial
+signal intensity distribution.
+
 ABS_MT_ORIENTATION
 
 The orientation of the ellipse. The value should describe a signed quarter
@@ -170,6 +192,16 @@ There are a few devices that support trackingID in hardware. User space can
 make use of these native identifiers to reduce bandwidth and cpu usage.
 
 
+Gestures
+--------
+
+In the specific application of creating gesture events, the TOUCH and WIDTH
+parameters can be used to, e.g., approximate finger pressure or distinguish
+between index finger and thumb. With the addition of the MINOR parameters,
+one can also distinguish between a sweeping finger and a pointing finger,
+and with ORIENTATION, one can detect twisting of fingers.
+
+
 Notes
 -----
 
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 30b503b8d67b..86cb2d2196ff 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -46,6 +46,7 @@ static unsigned int input_abs_bypass_init_data[] __initdata = {
         ABS_MT_TOOL_TYPE,
         ABS_MT_BLOB_ID,
         ABS_MT_TRACKING_ID,
+        ABS_MT_PRESSURE,
         0
 };
 static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
diff --git a/drivers/input/misc/winbond-cir.c b/drivers/input/misc/winbond-cir.c
index 33309fe44e20..c8f5a9a3fa14 100644
--- a/drivers/input/misc/winbond-cir.c
+++ b/drivers/input/misc/winbond-cir.c
@@ -768,7 +768,7 @@ wbcir_parse_rc6(struct device *dev, struct wbcir_data *data)
                 return;
         }
 
-        dev_info(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X "
+        dev_dbg(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X "
                 "toggle %u mode %u scan 0x%08X\n",
                 address,
                 command,
diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c
index 6d7aa10d10f0..7c1d7d420ae3 100644
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@@ -53,6 +53,12 @@ static const struct dmi_system_id __initconst lifebook_dmi_table[] = {
         {
                 /* LifeBook B */
                 .matches = {
+                        DMI_MATCH(DMI_PRODUCT_NAME, "Lifebook B Series"),
+                },
+        },
+        {
+                /* LifeBook B */
+                .matches = {
                         DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B Series"),
                 },
         },
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index c21e6d3a8844..794d070c6900 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -47,6 +47,7 @@
 #include <linux/workqueue.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c.h>
+#include <linux/gpio.h>
 
 #include <linux/spi/ad7879.h>
 
@@ -132,7 +133,9 @@ struct ad7879 {
         struct input_dev        *input;
         struct work_struct      work;
         struct timer_list       timer;
-
+#ifdef CONFIG_GPIOLIB
+        struct gpio_chip        gc;
+#endif
         struct mutex            mutex;
         unsigned                disabled:1;     /* P: mutex */
 
@@ -150,11 +153,9 @@ struct ad7879 {
         u8                      median;
         u16                     x_plate_ohms;
         u16                     pressure_max;
-        u16                     gpio_init;
         u16                     cmd_crtl1;
         u16                     cmd_crtl2;
         u16                     cmd_crtl3;
-        unsigned                gpio:1;
 };
 
 static int ad7879_read(bus_device *, u8);
@@ -237,24 +238,6 @@ static irqreturn_t ad7879_irq(int irq, void *handle)
 
 static void ad7879_setup(struct ad7879 *ts)
 {
-        ts->cmd_crtl3 = AD7879_YPLUS_BIT |
-                        AD7879_XPLUS_BIT |
-                        AD7879_Z2_BIT |
-                        AD7879_Z1_BIT |
-                        AD7879_TEMPMASK_BIT |
-                        AD7879_AUXVBATMASK_BIT |
-                        AD7879_GPIOALERTMASK_BIT;
-
-        ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR |
-                        AD7879_AVG(ts->averaging) |
-                        AD7879_MFS(ts->median) |
-                        AD7879_FCD(ts->first_conversion_delay) |
-                        ts->gpio_init;
-
-        ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 |
-                        AD7879_ACQ(ts->acquisition_time) |
-                        AD7879_TMR(ts->pen_down_acc_interval);
-
         ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
         ad7879_write(ts->bus, AD7879_REG_CTRL3, ts->cmd_crtl3);
         ad7879_write(ts->bus, AD7879_REG_CTRL1, ts->cmd_crtl1);
@@ -324,48 +307,132 @@ static ssize_t ad7879_disable_store(struct device *dev,
 
 static DEVICE_ATTR(disable, 0664, ad7879_disable_show, ad7879_disable_store);
 
-static ssize_t ad7879_gpio_show(struct device *dev,
-                                     struct device_attribute *attr, char *buf)
+static struct attribute *ad7879_attributes[] = {
+        &dev_attr_disable.attr,
+        NULL
+};
+
+static const struct attribute_group ad7879_attr_group = {
+        .attrs = ad7879_attributes,
+};
+
+#ifdef CONFIG_GPIOLIB
+static int ad7879_gpio_direction_input(struct gpio_chip *chip,
+                                        unsigned gpio)
 {
-        struct ad7879 *ts = dev_get_drvdata(dev);
+        struct ad7879 *ts = container_of(chip, struct ad7879, gc);
+        int err;
 
-        return sprintf(buf, "%u\n", ts->gpio);
+        mutex_lock(&ts->mutex);
+        ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIODIR | AD7879_GPIOPOL;
+        err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
+        mutex_unlock(&ts->mutex);
+
+        return err;
 }
 
-static ssize_t ad7879_gpio_store(struct device *dev,
-                                     struct device_attribute *attr,
-                                     const char *buf, size_t count)
+static int ad7879_gpio_direction_output(struct gpio_chip *chip,
+                                        unsigned gpio, int level)
 {
-        struct ad7879 *ts = dev_get_drvdata(dev);
-        unsigned long val;
-        int error;
+        struct ad7879 *ts = container_of(chip, struct ad7879, gc);
+        int err;
 
-        error = strict_strtoul(buf, 10, &val);
-        if (error)
-                return error;
+        mutex_lock(&ts->mutex);
+        ts->cmd_crtl2 &= ~AD7879_GPIODIR;
+        ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIOPOL;
+        if (level)
+                ts->cmd_crtl2 |= AD7879_GPIO_DATA;
+        else
+                ts->cmd_crtl2 &= ~AD7879_GPIO_DATA;
+
+        err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
+        mutex_unlock(&ts->mutex);
+
+        return err;
+}
+
+static int ad7879_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+        struct ad7879 *ts = container_of(chip, struct ad7879, gc);
+        u16 val;
 
         mutex_lock(&ts->mutex);
-        ts->gpio = !!val;
-        error = ad7879_write(ts->bus, AD7879_REG_CTRL2,
-                           ts->gpio ?
-                                ts->cmd_crtl2 & ~AD7879_GPIO_DATA :
-                                ts->cmd_crtl2 | AD7879_GPIO_DATA);
+        val = ad7879_read(ts->bus, AD7879_REG_CTRL2);
         mutex_unlock(&ts->mutex);
 
-        return error ? : count;
+        return !!(val & AD7879_GPIO_DATA);
 }
 
-static DEVICE_ATTR(gpio, 0664, ad7879_gpio_show, ad7879_gpio_store);
+static void ad7879_gpio_set_value(struct gpio_chip *chip,
+                                  unsigned gpio, int value)
+{
+        struct ad7879 *ts = container_of(chip, struct ad7879, gc);
 
-static struct attribute *ad7879_attributes[] = {
-        &dev_attr_disable.attr,
-        &dev_attr_gpio.attr,
-        NULL
-};
+        mutex_lock(&ts->mutex);
+        if (value)
+                ts->cmd_crtl2 |= AD7879_GPIO_DATA;
+        else
+                ts->cmd_crtl2 &= ~AD7879_GPIO_DATA;
 
-static const struct attribute_group ad7879_attr_group = {
-        .attrs = ad7879_attributes,
-};
+        ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
+        mutex_unlock(&ts->mutex);
+}
+
+static int __devinit ad7879_gpio_add(struct device *dev)
+{
+        struct ad7879 *ts = dev_get_drvdata(dev);
+        struct ad7879_platform_data *pdata = dev->platform_data;
+        int ret = 0;
+
+        if (pdata->gpio_export) {
+                ts->gc.direction_input = ad7879_gpio_direction_input;
+                ts->gc.direction_output = ad7879_gpio_direction_output;
+                ts->gc.get = ad7879_gpio_get_value;
+                ts->gc.set = ad7879_gpio_set_value;
+                ts->gc.can_sleep = 1;
+                ts->gc.base = pdata->gpio_base;
+                ts->gc.ngpio = 1;
+                ts->gc.label = "AD7879-GPIO";
+                ts->gc.owner = THIS_MODULE;
+                ts->gc.dev = dev;
+
+                ret = gpiochip_add(&ts->gc);
+                if (ret)
+                        dev_err(dev, "failed to register gpio %d\n",
+                                ts->gc.base);
+        }
+
+        return ret;
+}
+
+/*
+ * We mark ad7879_gpio_remove inline so there is a chance the code
+ * gets discarded when not needed. We can't do __devinit/__devexit
+ * markup since it is used in both probe and remove methods.
+ */
+static inline void ad7879_gpio_remove(struct device *dev)
+{
+        struct ad7879 *ts = dev_get_drvdata(dev);
+        struct ad7879_platform_data *pdata = dev->platform_data;
+        int ret;
+
+        if (pdata->gpio_export) {
+                ret = gpiochip_remove(&ts->gc);
+                if (ret)
+                        dev_err(dev, "failed to remove gpio %d\n",
+                                ts->gc.base);
+        }
+}
+#else
+static inline int ad7879_gpio_add(struct device *dev)
+{
+        return 0;
+}
+
+static inline void ad7879_gpio_remove(struct device *dev)
+{
+}
+#endif
 
 static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts)
 {
@@ -403,12 +470,6 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts)
         ts->pen_down_acc_interval = pdata->pen_down_acc_interval;
         ts->median = pdata->median;
 
-        if (pdata->gpio_output)
-                ts->gpio_init = AD7879_GPIO_EN |
-                                (pdata->gpio_default ? 0 : AD7879_GPIO_DATA);
-        else
-                ts->gpio_init = AD7879_GPIO_EN | AD7879_GPIODIR;
-
         snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&bus->dev));
 
         input_dev->name = "AD7879 Touchscreen";
@@ -446,6 +507,23 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts)
                 goto err_free_mem;
         }
 
+        ts->cmd_crtl3 = AD7879_YPLUS_BIT |
+                        AD7879_XPLUS_BIT |
+                        AD7879_Z2_BIT |
+                        AD7879_Z1_BIT |
+                        AD7879_TEMPMASK_BIT |
+                        AD7879_AUXVBATMASK_BIT |
+                        AD7879_GPIOALERTMASK_BIT;
+
+        ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR |
+                        AD7879_AVG(ts->averaging) |
+                        AD7879_MFS(ts->median) |
+                        AD7879_FCD(ts->first_conversion_delay);
+
+        ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 |
+                        AD7879_ACQ(ts->acquisition_time) |
+                        AD7879_TMR(ts->pen_down_acc_interval);
+
         ad7879_setup(ts);
 
         err = request_irq(bus->irq, ad7879_irq,
@@ -460,15 +538,21 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts)
         if (err)
                 goto err_free_irq;
 
-        err = input_register_device(input_dev);
+        err = ad7879_gpio_add(&bus->dev);
         if (err)
                 goto err_remove_attr;
 
+        err = input_register_device(input_dev);
+        if (err)
+                goto err_remove_gpio;
+
         dev_info(&bus->dev, "Rev.%d touchscreen, irq %d\n",
                  revid >> 8, bus->irq);
 
         return 0;
 
+err_remove_gpio:
+        ad7879_gpio_remove(&bus->dev);
 err_remove_attr:
         sysfs_remove_group(&bus->dev.kobj, &ad7879_attr_group);
 err_free_irq:
@@ -481,6 +565,7 @@ err_free_mem:
 
 static int __devexit ad7879_destroy(bus_device *bus, struct ad7879 *ts)
 {
+        ad7879_gpio_remove(&bus->dev);
         ad7879_disable(ts);
         sysfs_remove_group(&ts->bus->dev.kobj, &ad7879_attr_group);
         free_irq(ts->bus->irq, ts);
diff --git a/include/linux/input.h b/include/linux/input.h
index 7be8a6537b57..735ceaf1bc2d 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -660,6 +660,7 @@ struct input_absinfo {
 #define ABS_MT_TOOL_TYPE        0x37    /* Type of touching device */
 #define ABS_MT_BLOB_ID          0x38    /* Group a set of packets as a blob */
 #define ABS_MT_TRACKING_ID      0x39    /* Unique ID of initiated contact */
+#define ABS_MT_PRESSURE         0x3a    /* Pressure on contact area */
 
 #define ABS_MAX                 0x3f
 #define ABS_CNT                 (ABS_MAX+1)
diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h
index 4231104c9afa..6334cee1a3be 100644
--- a/include/linux/spi/ad7879.h
+++ b/include/linux/spi/ad7879.h
@@ -28,8 +28,12 @@ struct ad7879_platform_data {
          * 1 = 4, 2 = 8, 3 = 16 (median > averaging)
          */
         u8      median;
-        /* 1 = AUX/VBAT/GPIO set to GPIO Output */
-        u8      gpio_output;
-        /* Initial GPIO pin state (valid if gpio_output = 1) */
-        u8      gpio_default;
+        /* 1 = AUX/VBAT/GPIO export GPIO to gpiolib
+         * requires CONFIG_GPIOLIB
+         */
+        bool    gpio_export;
+        /* identifies the first GPIO number handled by this chip;
+         * or, if negative, requests dynamic ID allocation.
+         */
+        s32     gpio_base;
 };