aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-02-01 17:09:23 -0500
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-02-01 17:09:23 -0500
commit972560fb9d9ea7bc7082c0c79c99c24e3f56606c (patch)
treec7ca8212cc0dc85e22e04d9faf8744972fc62a93
parent89d13ec7c8b85f3c62a4a12034e65d3d2d3273a8 (diff)
ide-cd: move VERBOSE_IDE_CD_ERRORS code to ide-cd_verbose.c
* Rename ide-cd kernel module to ide-cd_mod in preparation to moving code out from ide-cd.[c,h]. Add MODULE_ALIAS("ide-cd") to preserve compatibility. * Move VERBOSE_IDE_CD_ERRORS code from ide-cd.[c,h] to ide-cd_verbose.c. ide-cd_verbose.c is IDE subsystem independent and may be easily converted into generic library usable by other drivers (i.e. libata) if needed. * Add CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS config option to drivers/ide/Kconfig replacing VERBOSE_IDE_CD_ERRORS define. Make this config option enabled by default and visible only if CONFIG_EMBEDDED is defined. before the patch: text data bss dec hex filename 22841 360 1056 24257 5ec1 drivers/ide/ide-cd.o after the patch w/ CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y: text data bss dec hex filename 22857 360 1056 24273 5ed1 drivers/ide/ide-cd_mod.o after the patch w/ CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=n: text data bss dec hex filename 15091 360 1056 16507 407b drivers/ide/ide-cd_mod.o Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat
-rw-r--r--drivers/ide/Kconfig9
-rw-r--r--drivers/ide/Makefile4
-rw-r--r--drivers/ide/ide-cd.c124
-rw-r--r--drivers/ide/ide-cd.h237
-rw-r--r--drivers/ide/ide-cd_verbose.c359
5 files changed, 375 insertions, 358 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 92b01170d8f3..e42a465f5717 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -206,6 +206,15 @@ config BLK_DEV_IDECD
206 To compile this driver as a module, choose M here: the 206 To compile this driver as a module, choose M here: the
207 module will be called ide-cd. 207 module will be called ide-cd.
208 208
209config BLK_DEV_IDECD_VERBOSE_ERRORS
210 bool "Verbose error logging for IDE/ATAPI CDROM driver" if EMBEDDED
211 depends on BLK_DEV_IDECD
212 default y
213 help
214 Turn this on to have the driver print out the meanings of the
215 ATAPI error codes. This will use up additional 8kB of kernel-space
216 memory, though.
217
209config BLK_DEV_IDETAPE 218config BLK_DEV_IDETAPE
210 tristate "Include IDE/ATAPI TAPE support (EXPERIMENTAL)" 219 tristate "Include IDE/ATAPI TAPE support (EXPERIMENTAL)"
211 depends on EXPERIMENTAL 220 depends on EXPERIMENTAL
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 0d2da89d15cf..5ce1d8f17c06 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -40,8 +40,10 @@ obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
40obj-$(CONFIG_IDE_H8300) += h8300/ 40obj-$(CONFIG_IDE_H8300) += h8300/
41obj-$(CONFIG_IDE_GENERIC) += ide-generic.o 41obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
42 42
43ide-cd_mod-y += ide-cd.o ide-cd_verbose.o
44
43obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o 45obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o
44obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o 46obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd_mod.o
45obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o 47obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
46obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o 48obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o
47 49
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 02488b48fa7a..f4a0264bea6d 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -199,129 +199,8 @@ void cdrom_analyze_sense_data(ide_drive_t *drive,
199 } 199 }
200 } 200 }
201 } 201 }
202#if VERBOSE_IDE_CD_ERRORS
203 {
204 int i;
205 const char *s = "bad sense key!";
206 char buf[80];
207
208 printk(KERN_ERR "ATAPI device %s:\n", drive->name);
209 if (sense->error_code == 0x70)
210 printk(KERN_CONT " Error: ");
211 else if (sense->error_code == 0x71)
212 printk(" Deferred Error: ");
213 else if (sense->error_code == 0x7f)
214 printk(KERN_CONT " Vendor-specific Error: ");
215 else
216 printk(KERN_CONT " Unknown Error Type: ");
217
218 if (sense->sense_key < ARRAY_SIZE(sense_key_texts))
219 s = sense_key_texts[sense->sense_key];
220
221 printk(KERN_CONT "%s -- (Sense key=0x%02x)\n",
222 s, sense->sense_key);
223
224 if (sense->asc == 0x40) {
225 sprintf(buf, "Diagnostic failure on component 0x%02x",
226 sense->ascq);
227 s = buf;
228 } else {
229 int lo = 0, mid, hi = ARRAY_SIZE(sense_data_texts);
230 unsigned long key = (sense->sense_key << 16);
231
232 key |= (sense->asc << 8);
233 if (!(sense->ascq >= 0x80 && sense->ascq <= 0xdd))
234 key |= sense->ascq;
235 s = NULL;
236
237 while (hi > lo) {
238 mid = (lo + hi) / 2;
239 if (sense_data_texts[mid].asc_ascq == key ||
240 sense_data_texts[mid].asc_ascq == (0xff0000|key)) {
241 s = sense_data_texts[mid].text;
242 break;
243 } else if (sense_data_texts[mid].asc_ascq > key)
244 hi = mid;
245 else
246 lo = mid + 1;
247 }
248 }
249
250 if (s == NULL) {
251 if (sense->asc > 0x80)
252 s = "(vendor-specific error)";
253 else
254 s = "(reserved error code)";
255 }
256
257 printk(KERN_ERR " %s -- (asc=0x%02x, ascq=0x%02x)\n",
258 s, sense->asc, sense->ascq);
259
260 if (failed_command != NULL) {
261 int lo = 0, mid, hi = ARRAY_SIZE(packet_command_texts);
262 s = NULL;
263
264 while (hi > lo) {
265 mid = (lo + hi) / 2;
266 if (packet_command_texts[mid].packet_command ==
267 failed_command->cmd[0]) {
268 s = packet_command_texts[mid].text;
269 break;
270 }
271 if (packet_command_texts[mid].packet_command >
272 failed_command->cmd[0])
273 hi = mid;
274 else
275 lo = mid + 1;
276 }
277
278 printk(KERN_ERR " The failed \"%s\" packet command "
279 "was: \n \"", s);
280 for (i = 0; i < sizeof(failed_command->cmd); i++)
281 printk(KERN_CONT "%02x ",
282 failed_command->cmd[i]);
283 printk(KERN_CONT "\"\n");
284 }
285
286 /* The SKSV bit specifies validity of the sense_key_specific
287 * in the next two commands. It is bit 7 of the first byte.
288 * In the case of NOT_READY, if SKSV is set the drive can
289 * give us nice ETA readings.
290 */
291 if (sense->sense_key == NOT_READY && (sense->sks[0] & 0x80)) {
292 int progress = (sense->sks[1] << 8 | sense->sks[2]) * 100;
293
294 printk(KERN_ERR " Command is %02d%% complete\n",
295 progress / 0xffff);
296 }
297
298 if (sense->sense_key == ILLEGAL_REQUEST &&
299 (sense->sks[0] & 0x80) != 0) {
300 printk(KERN_ERR " Error in %s byte %d",
301 (sense->sks[0] & 0x40) != 0 ?
302 "command packet" : "command data",
303 (sense->sks[1] << 8) + sense->sks[2]);
304
305 if ((sense->sks[0] & 0x40) != 0)
306 printk(KERN_CONT " bit %d",
307 sense->sks[0] & 0x07);
308
309 printk(KERN_CONT "\n");
310 }
311 }
312#else /* not VERBOSE_IDE_CD_ERRORS */
313 /* Suppress printing unit attention and `in progress of becoming ready'
314 errors when we're not being verbose. */
315 if (sense->sense_key == UNIT_ATTENTION ||
316 (sense->sense_key == NOT_READY && (sense->asc == 4 ||
317 sense->asc == 0x3a)))
318 return;
319 202
320 printk(KERN_ERR "%s: error code: 0x%02x sense_key: 0x%02x " 203 ide_cd_log_error(drive->name, failed_command, sense);
321 "asc: 0x%02x ascq: 0x%02x\n",
322 drive->name, sense->error_code, sense->sense_key,
323 sense->asc, sense->ascq);
324#endif /* not VERBOSE_IDE_CD_ERRORS */
325} 204}
326 205
327/* 206/*
@@ -3189,6 +3068,7 @@ static int __init ide_cdrom_init(void)
3189} 3068}
3190 3069
3191MODULE_ALIAS("ide:*m-cdrom*"); 3070MODULE_ALIAS("ide:*m-cdrom*");
3071MODULE_ALIAS("ide-cd");
3192module_init(ide_cdrom_init); 3072module_init(ide_cdrom_init);
3193module_exit(ide_cdrom_exit); 3073module_exit(ide_cdrom_exit);
3194MODULE_LICENSE("GPL"); 3074MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index 3a43178ab121..e1b401494a99 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -10,14 +10,6 @@
10#include <linux/cdrom.h> 10#include <linux/cdrom.h>
11#include <asm/byteorder.h> 11#include <asm/byteorder.h>
12 12
13/* Turn this on to have the driver print out the meanings of the
14 ATAPI error codes. This will use up additional kernel-space
15 memory, though. */
16
17#ifndef VERBOSE_IDE_CD_ERRORS
18#define VERBOSE_IDE_CD_ERRORS 1
19#endif
20
21/* 13/*
22 * typical timeout for packet command 14 * typical timeout for packet command
23 */ 15 */
@@ -153,232 +145,7 @@ struct cdrom_info {
153 unsigned long write_timeout; 145 unsigned long write_timeout;
154}; 146};
155 147
156/**************************************************************************** 148/* ide-cd_verbose.c */
157 * Descriptions of ATAPI error codes. 149void ide_cd_log_error(const char *, struct request *, struct request_sense *);
158 */
159
160/* This stuff should be in cdrom.h, since it is now generic... */
161#if VERBOSE_IDE_CD_ERRORS
162/* The generic packet command opcodes for CD/DVD Logical Units,
163 * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
164static const struct {
165 unsigned short packet_command;
166 const char * const text;
167} packet_command_texts[] = {
168 { GPCMD_TEST_UNIT_READY, "Test Unit Ready" },
169 { GPCMD_REQUEST_SENSE, "Request Sense" },
170 { GPCMD_FORMAT_UNIT, "Format Unit" },
171 { GPCMD_INQUIRY, "Inquiry" },
172 { GPCMD_START_STOP_UNIT, "Start/Stop Unit" },
173 { GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" },
174 { GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" },
175 { GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" },
176 { GPCMD_READ_10, "Read 10" },
177 { GPCMD_WRITE_10, "Write 10" },
178 { GPCMD_SEEK, "Seek" },
179 { GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" },
180 { GPCMD_VERIFY_10, "Verify 10" },
181 { GPCMD_FLUSH_CACHE, "Flush Cache" },
182 { GPCMD_READ_SUBCHANNEL, "Read Subchannel" },
183 { GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" },
184 { GPCMD_READ_HEADER, "Read Header" },
185 { GPCMD_PLAY_AUDIO_10, "Play Audio 10" },
186 { GPCMD_GET_CONFIGURATION, "Get Configuration" },
187 { GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" },
188 { GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" },
189 { GPCMD_GET_EVENT_STATUS_NOTIFICATION,
190 "Get Event Status Notification" },
191 { GPCMD_PAUSE_RESUME, "Pause/Resume" },
192 { GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" },
193 { GPCMD_READ_DISC_INFO, "Read Disc Info" },
194 { GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" },
195 { GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" },
196 { GPCMD_SEND_OPC, "Send OPC" },
197 { GPCMD_MODE_SELECT_10, "Mode Select 10" },
198 { GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" },
199 { GPCMD_MODE_SENSE_10, "Mode Sense 10" },
200 { GPCMD_CLOSE_TRACK, "Close Track" },
201 { GPCMD_BLANK, "Blank" },
202 { GPCMD_SEND_EVENT, "Send Event" },
203 { GPCMD_SEND_KEY, "Send Key" },
204 { GPCMD_REPORT_KEY, "Report Key" },
205 { GPCMD_LOAD_UNLOAD, "Load/Unload" },
206 { GPCMD_SET_READ_AHEAD, "Set Read-ahead" },
207 { GPCMD_READ_12, "Read 12" },
208 { GPCMD_GET_PERFORMANCE, "Get Performance" },
209 { GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" },
210 { GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" },
211 { GPCMD_SET_STREAMING, "Set Streaming" },
212 { GPCMD_READ_CD_MSF, "Read CD MSF" },
213 { GPCMD_SCAN, "Scan" },
214 { GPCMD_SET_SPEED, "Set Speed" },
215 { GPCMD_PLAY_CD, "Play CD" },
216 { GPCMD_MECHANISM_STATUS, "Mechanism Status" },
217 { GPCMD_READ_CD, "Read CD" },
218};
219
220/* From Table 303 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
221static const char * const sense_key_texts[16] = {
222 "No sense data",
223 "Recovered error",
224 "Not ready",
225 "Medium error",
226 "Hardware error",
227 "Illegal request",
228 "Unit attention",
229 "Data protect",
230 "Blank check",
231 "(reserved)",
232 "(reserved)",
233 "Aborted command",
234 "(reserved)",
235 "(reserved)",
236 "Miscompare",
237 "(reserved)",
238};
239
240/* From Table 304 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
241static const struct {
242 unsigned long asc_ascq;
243 const char * const text;
244} sense_data_texts[] = {
245 { 0x000000, "No additional sense information" },
246 { 0x000011, "Play operation in progress" },
247 { 0x000012, "Play operation paused" },
248 { 0x000013, "Play operation successfully completed" },
249 { 0x000014, "Play operation stopped due to error" },
250 { 0x000015, "No current audio status to return" },
251 { 0x010c0a, "Write error - padding blocks added" },
252 { 0x011700, "Recovered data with no error correction applied" },
253 { 0x011701, "Recovered data with retries" },
254 { 0x011702, "Recovered data with positive head offset" },
255 { 0x011703, "Recovered data with negative head offset" },
256 { 0x011704, "Recovered data with retries and/or CIRC applied" },
257 { 0x011705, "Recovered data using previous sector ID" },
258 { 0x011800, "Recovered data with error correction applied" },
259 { 0x011801, "Recovered data with error correction and retries applied"},
260 { 0x011802, "Recovered data - the data was auto-reallocated" },
261 { 0x011803, "Recovered data with CIRC" },
262 { 0x011804, "Recovered data with L-EC" },
263 { 0x015d00, "Failure prediction threshold exceeded"
264 " - Predicted logical unit failure" },
265 { 0x015d01, "Failure prediction threshold exceeded"
266 " - Predicted media failure" },
267 { 0x015dff, "Failure prediction threshold exceeded - False" },
268 { 0x017301, "Power calibration area almost full" },
269 { 0x020400, "Logical unit not ready - cause not reportable" },
270 /* Following is misspelled in ATAPI 2.6, _and_ in Mt. Fuji */
271 { 0x020401, "Logical unit not ready"
272 " - in progress [sic] of becoming ready" },
273 { 0x020402, "Logical unit not ready - initializing command required" },
274 { 0x020403, "Logical unit not ready - manual intervention required" },
275 { 0x020404, "Logical unit not ready - format in progress" },
276 { 0x020407, "Logical unit not ready - operation in progress" },
277 { 0x020408, "Logical unit not ready - long write in progress" },
278 { 0x020600, "No reference position found (media may be upside down)" },
279 { 0x023000, "Incompatible medium installed" },
280 { 0x023a00, "Medium not present" },
281 { 0x025300, "Media load or eject failed" },
282 { 0x025700, "Unable to recover table of contents" },
283 { 0x030300, "Peripheral device write fault" },
284 { 0x030301, "No write current" },
285 { 0x030302, "Excessive write errors" },
286 { 0x030c00, "Write error" },
287 { 0x030c01, "Write error - Recovered with auto reallocation" },
288 { 0x030c02, "Write error - auto reallocation failed" },
289 { 0x030c03, "Write error - recommend reassignment" },
290 { 0x030c04, "Compression check miscompare error" },
291 { 0x030c05, "Data expansion occurred during compress" },
292 { 0x030c06, "Block not compressible" },
293 { 0x030c07, "Write error - recovery needed" },
294 { 0x030c08, "Write error - recovery failed" },
295 { 0x030c09, "Write error - loss of streaming" },
296 { 0x031100, "Unrecovered read error" },
297 { 0x031106, "CIRC unrecovered error" },
298 { 0x033101, "Format command failed" },
299 { 0x033200, "No defect spare location available" },
300 { 0x033201, "Defect list update failure" },
301 { 0x035100, "Erase failure" },
302 { 0x037200, "Session fixation error" },
303 { 0x037201, "Session fixation error writin lead-in" },
304 { 0x037202, "Session fixation error writin lead-out" },
305 { 0x037300, "CD control error" },
306 { 0x037302, "Power calibration area is full" },
307 { 0x037303, "Power calibration area error" },
308 { 0x037304, "Program memory area / RMA update failure" },
309 { 0x037305, "Program memory area / RMA is full" },
310 { 0x037306, "Program memory area / RMA is (almost) full" },
311 { 0x040200, "No seek complete" },
312 { 0x040300, "Write fault" },
313 { 0x040900, "Track following error" },
314 { 0x040901, "Tracking servo failure" },
315 { 0x040902, "Focus servo failure" },
316 { 0x040903, "Spindle servo failure" },
317 { 0x041500, "Random positioning error" },
318 { 0x041501, "Mechanical positioning or changer error" },
319 { 0x041502, "Positioning error detected by read of medium" },
320 { 0x043c00, "Mechanical positioning or changer error" },
321 { 0x044000, "Diagnostic failure on component (ASCQ)" },
322 { 0x044400, "Internal CD/DVD logical unit failure" },
323 { 0x04b600, "Media load mechanism failed" },
324 { 0x051a00, "Parameter list length error" },
325 { 0x052000, "Invalid command operation code" },
326 { 0x052100, "Logical block address out of range" },
327 { 0x052102, "Invalid address for write" },
328 { 0x052400, "Invalid field in command packet" },
329 { 0x052600, "Invalid field in parameter list" },
330 { 0x052601, "Parameter not supported" },
331 { 0x052602, "Parameter value invalid" },
332 { 0x052700, "Write protected media" },
333 { 0x052c00, "Command sequence error" },
334 { 0x052c03, "Current program area is not empty" },
335 { 0x052c04, "Current program area is empty" },
336 { 0x053001, "Cannot read medium - unknown format" },
337 { 0x053002, "Cannot read medium - incompatible format" },
338 { 0x053900, "Saving parameters not supported" },
339 { 0x054e00, "Overlapped commands attempted" },
340 { 0x055302, "Medium removal prevented" },
341 { 0x055500, "System resource failure" },
342 { 0x056300, "End of user area encountered on this track" },
343 { 0x056400, "Illegal mode for this track or incompatible medium" },
344 { 0x056f00, "Copy protection key exchange failure"
345 " - Authentication failure" },
346 { 0x056f01, "Copy protection key exchange failure - Key not present" },
347 { 0x056f02, "Copy protection key exchange failure"
348 " - Key not established" },
349 { 0x056f03, "Read of scrambled sector without authentication" },
350 { 0x056f04, "Media region code is mismatched to logical unit" },
351 { 0x056f05, "Drive region must be permanent"
352 " / region reset count error" },
353 { 0x057203, "Session fixation error - incomplete track in session" },
354 { 0x057204, "Empty or partially written reserved track" },
355 { 0x057205, "No more RZONE reservations are allowed" },
356 { 0x05bf00, "Loss of streaming" },
357 { 0x062800, "Not ready to ready transition, medium may have changed" },
358 { 0x062900, "Power on, reset or hardware reset occurred" },
359 { 0x062a00, "Parameters changed" },
360 { 0x062a01, "Mode parameters changed" },
361 { 0x062e00, "Insufficient time for operation" },
362 { 0x063f00, "Logical unit operating conditions have changed" },
363 { 0x063f01, "Microcode has been changed" },
364 { 0x065a00, "Operator request or state change input (unspecified)" },
365 { 0x065a01, "Operator medium removal request" },
366 { 0x0bb900, "Play operation aborted" },
367 /* Here we use 0xff for the key (not a valid key) to signify
368 * that these can have _any_ key value associated with them... */
369 { 0xff0401, "Logical unit is in process of becoming ready" },
370 { 0xff0400, "Logical unit not ready, cause not reportable" },
371 { 0xff0402, "Logical unit not ready, initializing command required" },
372 { 0xff0403, "Logical unit not ready, manual intervention required" },
373 { 0xff0500, "Logical unit does not respond to selection" },
374 { 0xff0800, "Logical unit communication failure" },
375 { 0xff0802, "Logical unit communication parity error" },
376 { 0xff0801, "Logical unit communication time-out" },
377 { 0xff2500, "Logical unit not supported" },
378 { 0xff4c00, "Logical unit failed self-configuration" },
379 { 0xff3e00, "Logical unit has not self-configured yet" },
380};
381#endif
382
383 150
384#endif /* _IDE_CD_H */ 151#endif /* _IDE_CD_H */
diff --git a/drivers/ide/ide-cd_verbose.c b/drivers/ide/ide-cd_verbose.c
new file mode 100644
index 000000000000..6ed7ca071331
--- /dev/null
+++ b/drivers/ide/ide-cd_verbose.c
@@ -0,0 +1,359 @@
1/*
2 * Verbose error logging for ATAPI CD/DVD devices.
3 *
4 * Copyright (C) 1994-1996 Scott Snyder <snyder@fnald0.fnal.gov>
5 * Copyright (C) 1996-1998 Erik Andersen <andersee@debian.org>
6 * Copyright (C) 1998-2000 Jens Axboe <axboe@suse.de>
7 */
8
9#include <linux/kernel.h>
10#include <linux/blkdev.h>
11#include <linux/cdrom.h>
12#include <scsi/scsi.h>
13
14#ifndef CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS
15void ide_cd_log_error(const char *name, struct request *failed_command,
16 struct request_sense *sense)
17{
18 /* Suppress printing unit attention and `in progress of becoming ready'
19 errors when we're not being verbose. */
20 if (sense->sense_key == UNIT_ATTENTION ||
21 (sense->sense_key == NOT_READY && (sense->asc == 4 ||
22 sense->asc == 0x3a)))
23 return;
24
25 printk(KERN_ERR "%s: error code: 0x%02x sense_key: 0x%02x "
26 "asc: 0x%02x ascq: 0x%02x\n",
27 name, sense->error_code, sense->sense_key,
28 sense->asc, sense->ascq);
29}
30#else
31/* The generic packet command opcodes for CD/DVD Logical Units,
32 * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
33static const struct {
34 unsigned short packet_command;
35 const char * const text;
36} packet_command_texts[] = {
37 { GPCMD_TEST_UNIT_READY, "Test Unit Ready" },
38 { GPCMD_REQUEST_SENSE, "Request Sense" },
39 { GPCMD_FORMAT_UNIT, "Format Unit" },
40 { GPCMD_INQUIRY, "Inquiry" },
41 { GPCMD_START_STOP_UNIT, "Start/Stop Unit" },
42 { GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" },
43 { GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" },
44 { GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" },
45 { GPCMD_READ_10, "Read 10" },
46 { GPCMD_WRITE_10, "Write 10" },
47 { GPCMD_SEEK, "Seek" },
48 { GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" },
49 { GPCMD_VERIFY_10, "Verify 10" },
50 { GPCMD_FLUSH_CACHE, "Flush Cache" },
51 { GPCMD_READ_SUBCHANNEL, "Read Subchannel" },
52 { GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" },
53 { GPCMD_READ_HEADER, "Read Header" },
54 { GPCMD_PLAY_AUDIO_10, "Play Audio 10" },
55 { GPCMD_GET_CONFIGURATION, "Get Configuration" },
56 { GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" },
57 { GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" },
58 { GPCMD_GET_EVENT_STATUS_NOTIFICATION,
59 "Get Event Status Notification" },
60 { GPCMD_PAUSE_RESUME, "Pause/Resume" },
61 { GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" },
62 { GPCMD_READ_DISC_INFO, "Read Disc Info" },
63 { GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" },
64 { GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" },
65 { GPCMD_SEND_OPC, "Send OPC" },
66 { GPCMD_MODE_SELECT_10, "Mode Select 10" },
67 { GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" },
68 { GPCMD_MODE_SENSE_10, "Mode Sense 10" },
69 { GPCMD_CLOSE_TRACK, "Close Track" },
70 { GPCMD_BLANK, "Blank" },
71 { GPCMD_SEND_EVENT, "Send Event" },
72 { GPCMD_SEND_KEY, "Send Key" },
73 { GPCMD_REPORT_KEY, "Report Key" },
74 { GPCMD_LOAD_UNLOAD, "Load/Unload" },
75 { GPCMD_SET_READ_AHEAD, "Set Read-ahead" },
76 { GPCMD_READ_12, "Read 12" },
77 { GPCMD_GET_PERFORMANCE, "Get Performance" },
78 { GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" },
79 { GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" },
80 { GPCMD_SET_STREAMING, "Set Streaming" },
81 { GPCMD_READ_CD_MSF, "Read CD MSF" },
82 { GPCMD_SCAN, "Scan" },
83 { GPCMD_SET_SPEED, "Set Speed" },
84 { GPCMD_PLAY_CD, "Play CD" },
85 { GPCMD_MECHANISM_STATUS, "Mechanism Status" },
86 { GPCMD_READ_CD, "Read CD" },
87};
88
89/* From Table 303 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
90static const char * const sense_key_texts[16] = {
91 "No sense data",
92 "Recovered error",
93 "Not ready",
94 "Medium error",
95 "Hardware error",
96 "Illegal request",
97 "Unit attention",
98 "Data protect",
99 "Blank check",
100 "(reserved)",
101 "(reserved)",
102 "Aborted command",
103 "(reserved)",
104 "(reserved)",
105 "Miscompare",
106 "(reserved)",
107};
108
109/* From Table 304 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
110static const struct {
111 unsigned long asc_ascq;
112 const char * const text;
113} sense_data_texts[] = {
114 { 0x000000, "No additional sense information" },
115 { 0x000011, "Play operation in progress" },
116 { 0x000012, "Play operation paused" },
117 { 0x000013, "Play operation successfully completed" },
118 { 0x000014, "Play operation stopped due to error" },
119 { 0x000015, "No current audio status to return" },
120 { 0x010c0a, "Write error - padding blocks added" },
121 { 0x011700, "Recovered data with no error correction applied" },
122 { 0x011701, "Recovered data with retries" },
123 { 0x011702, "Recovered data with positive head offset" },
124 { 0x011703, "Recovered data with negative head offset" },
125 { 0x011704, "Recovered data with retries and/or CIRC applied" },
126 { 0x011705, "Recovered data using previous sector ID" },
127 { 0x011800, "Recovered data with error correction applied" },
128 { 0x011801, "Recovered data with error correction and retries applied"},
129 { 0x011802, "Recovered data - the data was auto-reallocated" },
130 { 0x011803, "Recovered data with CIRC" },
131 { 0x011804, "Recovered data with L-EC" },
132 { 0x015d00, "Failure prediction threshold exceeded"
133 " - Predicted logical unit failure" },
134 { 0x015d01, "Failure prediction threshold exceeded"
135 " - Predicted media failure" },
136 { 0x015dff, "Failure prediction threshold exceeded - False" },
137 { 0x017301, "Power calibration area almost full" },
138 { 0x020400, "Logical unit not ready - cause not reportable" },
139 /* Following is misspelled in ATAPI 2.6, _and_ in Mt. Fuji */
140 { 0x020401, "Logical unit not ready"
141 " - in progress [sic] of becoming ready" },
142 { 0x020402, "Logical unit not ready - initializing command required" },
143 { 0x020403, "Logical unit not ready - manual intervention required" },
144 { 0x020404, "Logical unit not ready - format in progress" },
145 { 0x020407, "Logical unit not ready - operation in progress" },
146 { 0x020408, "Logical unit not ready - long write in progress" },
147 { 0x020600, "No reference position found (media may be upside down)" },
148 { 0x023000, "Incompatible medium installed" },
149 { 0x023a00, "Medium not present" },
150 { 0x025300, "Media load or eject failed" },
151 { 0x025700, "Unable to recover table of contents" },
152 { 0x030300, "Peripheral device write fault" },
153 { 0x030301, "No write current" },
154 { 0x030302, "Excessive write errors" },
155 { 0x030c00, "Write error" },
156 { 0x030c01, "Write error - Recovered with auto reallocation" },
157 { 0x030c02, "Write error - auto reallocation failed" },
158 { 0x030c03, "Write error - recommend reassignment" },
159 { 0x030c04, "Compression check miscompare error" },
160 { 0x030c05, "Data expansion occurred during compress" },
161 { 0x030c06, "Block not compressible" },
162 { 0x030c07, "Write error - recovery needed" },
163 { 0x030c08, "Write error - recovery failed" },
164 { 0x030c09, "Write error - loss of streaming" },
165 { 0x031100, "Unrecovered read error" },
166 { 0x031106, "CIRC unrecovered error" },
167 { 0x033101, "Format command failed" },
168 { 0x033200, "No defect spare location available" },
169 { 0x033201, "Defect list update failure" },
170 { 0x035100, "Erase failure" },
171 { 0x037200, "Session fixation error" },
172 { 0x037201, "Session fixation error writin lead-in" },
173 { 0x037202, "Session fixation error writin lead-out" },
174 { 0x037300, "CD control error" },
175 { 0x037302, "Power calibration area is full" },
176 { 0x037303, "Power calibration area error" },
177 { 0x037304, "Program memory area / RMA update failure" },
178 { 0x037305, "Program memory area / RMA is full" },
179 { 0x037306, "Program memory area / RMA is (almost) full" },
180 { 0x040200, "No seek complete" },
181 { 0x040300, "Write fault" },
182 { 0x040900, "Track following error" },
183 { 0x040901, "Tracking servo failure" },
184 { 0x040902, "Focus servo failure" },
185 { 0x040903, "Spindle servo failure" },
186 { 0x041500, "Random positioning error" },
187 { 0x041501, "Mechanical positioning or changer error" },
188 { 0x041502, "Positioning error detected by read of medium" },
189 { 0x043c00, "Mechanical positioning or changer error" },
190 { 0x044000, "Diagnostic failure on component (ASCQ)" },
191 { 0x044400, "Internal CD/DVD logical unit failure" },
192 { 0x04b600, "Media load mechanism failed" },
193 { 0x051a00, "Parameter list length error" },
194 { 0x052000, "Invalid command operation code" },
195 { 0x052100, "Logical block address out of range" },
196 { 0x052102, "Invalid address for write" },
197 { 0x052400, "Invalid field in command packet" },
198 { 0x052600, "Invalid field in parameter list" },
199 { 0x052601, "Parameter not supported" },
200 { 0x052602, "Parameter value invalid" },
201 { 0x052700, "Write protected media" },
202 { 0x052c00, "Command sequence error" },
203 { 0x052c03, "Current program area is not empty" },
204 { 0x052c04, "Current program area is empty" },
205 { 0x053001, "Cannot read medium - unknown format" },
206 { 0x053002, "Cannot read medium - incompatible format" },
207 { 0x053900, "Saving parameters not supported" },
208 { 0x054e00, "Overlapped commands attempted" },
209 { 0x055302, "Medium removal prevented" },
210 { 0x055500, "System resource failure" },
211 { 0x056300, "End of user area encountered on this track" },
212 { 0x056400, "Illegal mode for this track or incompatible medium" },
213 { 0x056f00, "Copy protection key exchange failure"
214 " - Authentication failure" },
215 { 0x056f01, "Copy protection key exchange failure - Key not present" },
216 { 0x056f02, "Copy protection key exchange failure"
217 " - Key not established" },
218 { 0x056f03, "Read of scrambled sector without authentication" },
219 { 0x056f04, "Media region code is mismatched to logical unit" },
220 { 0x056f05, "Drive region must be permanent"
221 " / region reset count error" },
222 { 0x057203, "Session fixation error - incomplete track in session" },
223 { 0x057204, "Empty or partially written reserved track" },
224 { 0x057205, "No more RZONE reservations are allowed" },
225 { 0x05bf00, "Loss of streaming" },
226 { 0x062800, "Not ready to ready transition, medium may have changed" },
227 { 0x062900, "Power on, reset or hardware reset occurred" },
228 { 0x062a00, "Parameters changed" },
229 { 0x062a01, "Mode parameters changed" },
230 { 0x062e00, "Insufficient time for operation" },
231 { 0x063f00, "Logical unit operating conditions have changed" },
232 { 0x063f01, "Microcode has been changed" },
233 { 0x065a00, "Operator request or state change input (unspecified)" },
234 { 0x065a01, "Operator medium removal request" },
235 { 0x0bb900, "Play operation aborted" },
236 /* Here we use 0xff for the key (not a valid key) to signify
237 * that these can have _any_ key value associated with them... */
238 { 0xff0401, "Logical unit is in process of becoming ready" },
239 { 0xff0400, "Logical unit not ready, cause not reportable" },
240 { 0xff0402, "Logical unit not ready, initializing command required" },
241 { 0xff0403, "Logical unit not ready, manual intervention required" },
242 { 0xff0500, "Logical unit does not respond to selection" },
243 { 0xff0800, "Logical unit communication failure" },
244 { 0xff0802, "Logical unit communication parity error" },
245 { 0xff0801, "Logical unit communication time-out" },
246 { 0xff2500, "Logical unit not supported" },
247 { 0xff4c00, "Logical unit failed self-configuration" },
248 { 0xff3e00, "Logical unit has not self-configured yet" },
249};
250
251void ide_cd_log_error(const char *name, struct request *failed_command,
252 struct request_sense *sense)
253{
254 int i;
255 const char *s = "bad sense key!";
256 char buf[80];
257
258 printk(KERN_ERR "ATAPI device %s:\n", name);
259 if (sense->error_code == 0x70)
260 printk(KERN_CONT " Error: ");
261 else if (sense->error_code == 0x71)
262 printk(" Deferred Error: ");
263 else if (sense->error_code == 0x7f)
264 printk(KERN_CONT " Vendor-specific Error: ");
265 else
266 printk(KERN_CONT " Unknown Error Type: ");
267
268 if (sense->sense_key < ARRAY_SIZE(sense_key_texts))
269 s = sense_key_texts[sense->sense_key];
270
271 printk(KERN_CONT "%s -- (Sense key=0x%02x)\n", s, sense->sense_key);
272
273 if (sense->asc == 0x40) {
274 sprintf(buf, "Diagnostic failure on component 0x%02x",
275 sense->ascq);
276 s = buf;
277 } else {
278 int lo = 0, mid, hi = ARRAY_SIZE(sense_data_texts);
279 unsigned long key = (sense->sense_key << 16);
280
281 key |= (sense->asc << 8);
282 if (!(sense->ascq >= 0x80 && sense->ascq <= 0xdd))
283 key |= sense->ascq;
284 s = NULL;
285
286 while (hi > lo) {
287 mid = (lo + hi) / 2;
288 if (sense_data_texts[mid].asc_ascq == key ||
289 sense_data_texts[mid].asc_ascq == (0xff0000|key)) {
290 s = sense_data_texts[mid].text;
291 break;
292 } else if (sense_data_texts[mid].asc_ascq > key)
293 hi = mid;
294 else
295 lo = mid + 1;
296 }
297 }
298
299 if (s == NULL) {
300 if (sense->asc > 0x80)
301 s = "(vendor-specific error)";
302 else
303 s = "(reserved error code)";
304 }
305
306 printk(KERN_ERR " %s -- (asc=0x%02x, ascq=0x%02x)\n",
307 s, sense->asc, sense->ascq);
308
309 if (failed_command != NULL) {
310 int lo = 0, mid, hi = ARRAY_SIZE(packet_command_texts);
311 s = NULL;
312
313 while (hi > lo) {
314 mid = (lo + hi) / 2;
315 if (packet_command_texts[mid].packet_command ==
316 failed_command->cmd[0]) {
317 s = packet_command_texts[mid].text;
318 break;
319 }
320 if (packet_command_texts[mid].packet_command >
321 failed_command->cmd[0])
322 hi = mid;
323 else
324 lo = mid + 1;
325 }
326
327 printk(KERN_ERR " The failed \"%s\" packet command "
328 "was: \n \"", s);
329 for (i = 0; i < sizeof(failed_command->cmd); i++)
330 printk(KERN_CONT "%02x ", failed_command->cmd[i]);
331 printk(KERN_CONT "\"\n");
332 }
333
334 /* The SKSV bit specifies validity of the sense_key_specific
335 * in the next two commands. It is bit 7 of the first byte.
336 * In the case of NOT_READY, if SKSV is set the drive can
337 * give us nice ETA readings.
338 */
339 if (sense->sense_key == NOT_READY && (sense->sks[0] & 0x80)) {
340 int progress = (sense->sks[1] << 8 | sense->sks[2]) * 100;
341
342 printk(KERN_ERR " Command is %02d%% complete\n",
343 progress / 0xffff);
344 }
345
346 if (sense->sense_key == ILLEGAL_REQUEST &&
347 (sense->sks[0] & 0x80) != 0) {
348 printk(KERN_ERR " Error in %s byte %d",
349 (sense->sks[0] & 0x40) != 0 ?
350 "command packet" : "command data",
351 (sense->sks[1] << 8) + sense->sks[2]);
352
353 if ((sense->sks[0] & 0x40) != 0)
354 printk(KERN_CONT " bit %d", sense->sks[0] & 0x07);
355
356 printk(KERN_CONT "\n");
357 }
358}
359#endif
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-16 09:26:38 -0500