aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDan Williams <dan.j.williams@intel.com>2006-12-06 20:59:39 -0500
committerRussell King <rmk+kernel@arm.linux.org.uk>2006-12-07 12:20:21 -0500
commit285f5fa7e9a35e75d9022f9b036ed709721c5cdf (patch)
treed977aecd1a350e2c14086005b873141d8d829e12
parent4dbda6a50ae34d853353f15d30a166c87143408f (diff)
[ARM] 3995/1: iop13xx: add iop13xx support
The iop348 processor integrates an Xscale (XSC3 512KB L2 Cache) core with a Serial Attached SCSI (SAS) controller, multi-ported DDR2 memory controller, 3 Application Direct Memory Access (DMA) controllers, a 133Mhz PCI-X interface, a x8 PCI-Express interface, and other peripherals to form a system-on-a-chip RAID subsystem engine. The iop342 processor replaces the SAS controller with a second Xscale core for dual core embedded applications. The iop341 processor is the single core version of iop342. This patch supports the two Intel customer reference platforms iq81340mc for external storage and iq81340sc for direct attach (HBA) development. The developer's manual is available here: ftp://download.intel.com/design/iio/docs/31503701.pdf Changelog: * removed virtual addresses from resource definitions * cleaned up some unnecessary #include's Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat
-rw-r--r--arch/arm/Kconfig8
-rw-r--r--arch/arm/Makefile1
-rw-r--r--arch/arm/mach-iop13xx/Kconfig20
-rw-r--r--arch/arm/mach-iop13xx/Makefile12
-rw-r--r--arch/arm/mach-iop13xx/Makefile.boot3
-rw-r--r--arch/arm/mach-iop13xx/io.c93
-rw-r--r--arch/arm/mach-iop13xx/iq81340mc.c98
-rw-r--r--arch/arm/mach-iop13xx/iq81340sc.c100
-rw-r--r--arch/arm/mach-iop13xx/irq.c286
-rw-r--r--arch/arm/mach-iop13xx/pci.c1113
-rw-r--r--arch/arm/mach-iop13xx/setup.c406
-rw-r--r--arch/arm/mach-iop13xx/time.c102
-rw-r--r--arch/arm/mm/Kconfig2
-rw-r--r--drivers/i2c/busses/Kconfig6
-rw-r--r--include/asm-arm/arch-iop13xx/debug-macro.S26
-rw-r--r--include/asm-arm/arch-iop13xx/dma.h3
-rw-r--r--include/asm-arm/arch-iop13xx/entry-macro.S39
-rw-r--r--include/asm-arm/arch-iop13xx/hardware.h28
-rw-r--r--include/asm-arm/arch-iop13xx/io.h41
-rw-r--r--include/asm-arm/arch-iop13xx/iop13xx.h492
-rw-r--r--include/asm-arm/arch-iop13xx/iq81340.h31
-rw-r--r--include/asm-arm/arch-iop13xx/irqs.h207
-rw-r--r--include/asm-arm/arch-iop13xx/memory.h64
-rw-r--r--include/asm-arm/arch-iop13xx/pci.h57
-rw-r--r--include/asm-arm/arch-iop13xx/system.h59
-rw-r--r--include/asm-arm/arch-iop13xx/timex.h3
-rw-r--r--include/asm-arm/arch-iop13xx/uncompress.h24
-rw-r--r--include/asm-arm/arch-iop13xx/vmalloc.h4
28 files changed, 3324 insertions, 4 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ce00c570459d..d654c4f87d0f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -223,6 +223,12 @@ config ARCH_IOP33X
223 help 223 help
224 Support for Intel's IOP33X (XScale) family of processors. 224 Support for Intel's IOP33X (XScale) family of processors.
225 225
226config ARCH_IOP13XX
227 bool "IOP13xx-based"
228 select PCI
229 help
230 Support for Intel's IOP13XX (XScale) family of processors.
231
226config ARCH_IXP4XX 232config ARCH_IXP4XX
227 bool "IXP4xx-based" 233 bool "IXP4xx-based"
228 depends on MMU 234 depends on MMU
@@ -331,6 +337,8 @@ source "arch/arm/mach-iop32x/Kconfig"
331 337
332source "arch/arm/mach-iop33x/Kconfig" 338source "arch/arm/mach-iop33x/Kconfig"
333 339
340source "arch/arm/mach-iop13xx/Kconfig"
341
334source "arch/arm/mach-ixp4xx/Kconfig" 342source "arch/arm/mach-ixp4xx/Kconfig"
335 343
336source "arch/arm/mach-ixp2000/Kconfig" 344source "arch/arm/mach-ixp2000/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 6f4f8bf36071..5f6f9a585709 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -108,6 +108,7 @@ endif
108 machine-$(CONFIG_ARCH_CLPS711X) := clps711x 108 machine-$(CONFIG_ARCH_CLPS711X) := clps711x
109 machine-$(CONFIG_ARCH_IOP32X) := iop32x 109 machine-$(CONFIG_ARCH_IOP32X) := iop32x
110 machine-$(CONFIG_ARCH_IOP33X) := iop33x 110 machine-$(CONFIG_ARCH_IOP33X) := iop33x
111 machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
111 machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx 112 machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
112 machine-$(CONFIG_ARCH_IXP2000) := ixp2000 113 machine-$(CONFIG_ARCH_IXP2000) := ixp2000
113 machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx 114 machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
diff --git a/arch/arm/mach-iop13xx/Kconfig b/arch/arm/mach-iop13xx/Kconfig
new file mode 100644
index 000000000000..40c2d689f2eb
--- /dev/null
+++ b/arch/arm/mach-iop13xx/Kconfig
@@ -0,0 +1,20 @@
1if ARCH_IOP13XX
2
3menu "IOP13XX Implementation Options"
4
5comment "IOP13XX Platform Support"
6
7config MACH_IQ81340SC
8 bool "Enable IQ81340SC Hardware Support"
9 help
10 Say Y here if you want to support running on the Intel IQ81340SC
11 evaluation kit.
12
13config MACH_IQ81340MC
14 bool "Enable IQ81340MC Hardware Support"
15 help
16 Say Y here if you want to support running on the Intel IQ81340MC
17 evaluation kit.
18
19endmenu
20endif
diff --git a/arch/arm/mach-iop13xx/Makefile b/arch/arm/mach-iop13xx/Makefile
new file mode 100644
index 000000000000..c3d6c08f2d4c
--- /dev/null
+++ b/arch/arm/mach-iop13xx/Makefile
@@ -0,0 +1,12 @@
1obj-y :=
2obj-m :=
3obj-n :=
4obj- :=
5
6obj-$(CONFIG_ARCH_IOP13XX) += setup.o
7obj-$(CONFIG_ARCH_IOP13XX) += irq.o
8obj-$(CONFIG_ARCH_IOP13XX) += time.o
9obj-$(CONFIG_ARCH_IOP13XX) += pci.o
10obj-$(CONFIG_ARCH_IOP13XX) += io.o
11obj-$(CONFIG_MACH_IQ81340SC) += iq81340sc.o
12obj-$(CONFIG_MACH_IQ81340MC) += iq81340mc.o
diff --git a/arch/arm/mach-iop13xx/Makefile.boot b/arch/arm/mach-iop13xx/Makefile.boot
new file mode 100644
index 000000000000..0b0e19fdfe6c
--- /dev/null
+++ b/arch/arm/mach-iop13xx/Makefile.boot
@@ -0,0 +1,3 @@
1 zreladdr-y := 0x00008000
2params_phys-y := 0x00000100
3initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c
new file mode 100644
index 000000000000..fbf9f88e46ea
--- /dev/null
+++ b/arch/arm/mach-iop13xx/io.c
@@ -0,0 +1,93 @@
1/*
2 * iop13xx custom ioremap implementation
3 * Copyright (c) 2005-2006, Intel Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
16 * Place - Suite 330, Boston, MA 02111-1307 USA.
17 *
18 */
19#include <linux/kernel.h>
20#include <linux/module.h>
21#include <asm/hardware.h>
22#include <asm/io.h>
23
24void * __iomem __iop13xx_ioremap(unsigned long cookie, size_t size,
25 unsigned long flags)
26{
27 void __iomem * retval;
28
29 switch (cookie) {
30 case IOP13XX_PCIX_LOWER_MEM_RA ... IOP13XX_PCIX_UPPER_MEM_RA:
31 if (unlikely(!iop13xx_atux_mem_base))
32 retval = NULL;
33 else
34 retval = (void *)(iop13xx_atux_mem_base +
35 (cookie - IOP13XX_PCIX_LOWER_MEM_RA));
36 break;
37 case IOP13XX_PCIE_LOWER_MEM_RA ... IOP13XX_PCIE_UPPER_MEM_RA:
38 if (unlikely(!iop13xx_atue_mem_base))
39 retval = NULL;
40 else
41 retval = (void *)(iop13xx_atue_mem_base +
42 (cookie - IOP13XX_PCIE_LOWER_MEM_RA));
43 break;
44 case IOP13XX_PBI_LOWER_MEM_RA ... IOP13XX_PBI_UPPER_MEM_RA:
45 retval = __ioremap(IOP13XX_PBI_LOWER_MEM_PA +
46 (cookie - IOP13XX_PBI_LOWER_MEM_RA),
47 size, flags);
48 break;
49 case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA:
50 retval = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(cookie);
51 break;
52 case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA:
53 retval = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(cookie);
54 break;
55 case IOP13XX_PMMR_PHYS_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_PA:
56 retval = (void *) IOP13XX_PMMR_PHYS_TO_VIRT(cookie);
57 break;
58 default:
59 retval = __ioremap(cookie, size, flags);
60 }
61
62 return retval;
63}
64EXPORT_SYMBOL(__iop13xx_ioremap);
65
66void __iop13xx_iounmap(void __iomem *addr)
67{
68 extern void __iounmap(volatile void __iomem *addr);
69
70 if (iop13xx_atue_mem_base)
71 if (addr >= (void __iomem *) iop13xx_atue_mem_base &&
72 addr < (void __iomem *) (iop13xx_atue_mem_base +
73 iop13xx_atue_mem_size))
74 goto skip;
75
76 if (iop13xx_atux_mem_base)
77 if (addr >= (void __iomem *) iop13xx_atux_mem_base &&
78 addr < (void __iomem *) (iop13xx_atux_mem_base +
79 iop13xx_atux_mem_size))
80 goto skip;
81
82 switch ((u32) addr) {
83 case IOP13XX_PCIE_LOWER_IO_VA ... IOP13XX_PCIE_UPPER_IO_VA:
84 case IOP13XX_PCIX_LOWER_IO_VA ... IOP13XX_PCIX_UPPER_IO_VA:
85 case IOP13XX_PMMR_VIRT_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_VA:
86 goto skip;
87 }
88 __iounmap(addr);
89
90skip:
91 return;
92}
93EXPORT_SYMBOL(__iop13xx_iounmap);
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
new file mode 100644
index 000000000000..ee595786cd22
--- /dev/null
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -0,0 +1,98 @@
1/*
2 * iq81340mc board support
3 * Copyright (c) 2005-2006, Intel Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
16 * Place - Suite 330, Boston, MA 02111-1307 USA.
17 *
18 */
19#include <linux/pci.h>
20
21#include <asm/hardware.h>
22#include <asm/irq.h>
23#include <asm/mach/pci.h>
24#include <asm/mach-types.h>
25#include <asm/mach/arch.h>
26#include <asm/arch/pci.h>
27#include <asm/mach/time.h>
28
29extern int init_atu; /* Flag to select which ATU(s) to initialize / disable */
30
31static int __init
32iq81340mc_pcix_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
33{
34 switch (idsel) {
35 case 1:
36 switch (pin) {
37 case 1: return ATUX_INTB;
38 case 2: return ATUX_INTC;
39 case 3: return ATUX_INTD;
40 case 4: return ATUX_INTA;
41 default: return -1;
42 }
43 case 2:
44 switch (pin) {
45 case 1: return ATUX_INTC;
46 case 2: return ATUX_INTD;
47 case 3: return ATUX_INTC;
48 case 4: return ATUX_INTD;
49 default: return -1;
50 }
51 default: return -1;
52 }
53}
54
55static struct hw_pci iq81340mc_pci __initdata = {
56 .swizzle = pci_std_swizzle,
57 .nr_controllers = 0,
58 .setup = iop13xx_pci_setup,
59 .map_irq = iq81340mc_pcix_map_irq,
60 .scan = iop13xx_scan_bus,
61 .preinit = iop13xx_pci_init,
62};
63
64static int __init iq81340mc_pci_init(void)
65{
66 iop13xx_atu_select(&iq81340mc_pci);
67 pci_common_init(&iq81340mc_pci);
68 iop13xx_map_pci_memory();
69
70 return 0;
71}
72
73static void __init iq81340mc_init(void)
74{
75 iop13xx_platform_init();
76 iq81340mc_pci_init();
77}
78
79static void __init iq81340mc_timer_init(void)
80{
81 iop13xx_init_time(400000000);
82}
83
84static struct sys_timer iq81340mc_timer = {
85 .init = iq81340mc_timer_init,
86 .offset = iop13xx_gettimeoffset,
87};
88
89MACHINE_START(IQ81340MC, "Intel IQ81340MC")
90 /* Maintainer: Dan Williams <dan.j.williams@intel.com> */
91 .phys_io = PHYS_IO,
92 .io_pg_offst = IO_PG_OFFSET,
93 .map_io = iop13xx_map_io,
94 .init_irq = iop13xx_init_irq,
95 .timer = &iq81340mc_timer,
96 .boot_params = BOOT_PARAM_OFFSET,
97 .init_machine = iq81340mc_init,
98MACHINE_END
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
new file mode 100644
index 000000000000..6677e14b61bf
--- /dev/null
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -0,0 +1,100 @@
1/*
2 * iq81340sc board support
3 * Copyright (c) 2005-2006, Intel Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
16 * Place - Suite 330, Boston, MA 02111-1307 USA.
17 *
18 */
19#include <linux/pci.h>
20
21#include <asm/hardware.h>
22#include <asm/irq.h>
23#include <asm/mach/pci.h>
24#include <asm/mach-types.h>
25#include <asm/mach/arch.h>
26#include <asm/arch/pci.h>
27#include <asm/mach/time.h>
28
29extern int init_atu;
30
31static int __init
32iq81340sc_atux_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
33{
34 WARN_ON(idsel < 1 || idsel > 2);
35
36 switch (idsel) {
37 case 1:
38 switch (pin) {
39 case 1: return ATUX_INTB;
40 case 2: return ATUX_INTC;
41 case 3: return ATUX_INTD;
42 case 4: return ATUX_INTA;
43 default: return -1;
44 }
45 case 2:
46 switch (pin) {
47 case 1: return ATUX_INTC;
48 case 2: return ATUX_INTC;
49 case 3: return ATUX_INTC;
50 case 4: return ATUX_INTC;
51 default: return -1;
52 }
53 default: return -1;
54 }
55}
56
57static struct hw_pci iq81340sc_pci __initdata = {
58 .swizzle = pci_std_swizzle,
59 .nr_controllers = 0,
60 .setup = iop13xx_pci_setup,
61 .scan = iop13xx_scan_bus,
62 .map_irq = iq81340sc_atux_map_irq,
63 .preinit = iop13xx_pci_init
64};
65
66static int __init iq81340sc_pci_init(void)
67{
68 iop13xx_atu_select(&iq81340sc_pci);
69 pci_common_init(&iq81340sc_pci);
70 iop13xx_map_pci_memory();
71
72 return 0;
73}
74
75static void __init iq81340sc_init(void)
76{
77 iop13xx_platform_init();
78 iq81340sc_pci_init();
79}
80
81static void __init iq81340sc_timer_init(void)
82{
83 iop13xx_init_time(400000000);
84}
85
86static struct sys_timer iq81340sc_timer = {
87 .init = iq81340sc_timer_init,
88 .offset = iop13xx_gettimeoffset,
89};
90
91MACHINE_START(IQ81340SC, "Intel IQ81340SC")
92 /* Maintainer: Dan Williams <dan.j.williams@intel.com> */
93 .phys_io = PHYS_IO,
94 .io_pg_offst = IO_PG_OFFSET,
95 .map_io = iop13xx_map_io,
96 .init_irq = iop13xx_init_irq,
97 .timer = &iq81340sc_timer,
98 .boot_params = BOOT_PARAM_OFFSET,
99 .init_machine = iq81340sc_init,
100MACHINE_END
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
new file mode 100644
index 000000000000..c4d9c8c5579c
--- /dev/null
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -0,0 +1,286 @@
1/*
2 * iop13xx IRQ handling / support functions
3 * Copyright (c) 2005-2006, Intel Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
16 * Place - Suite 330, Boston, MA 02111-1307 USA.
17 *
18 */
19#include <linux/init.h>
20#include <linux/interrupt.h>
21#include <linux/list.h>
22#include <linux/sysctl.h>
23#include <asm/uaccess.h>
24#include <asm/mach/irq.h>
25#include <asm/irq.h>
26#include <asm/hardware.h>
27#include <asm/mach-types.h>
28#include <asm/arch/irqs.h>
29
30/* INTCTL0 CP6 R0 Page 4
31 */
32static inline u32 read_intctl_0(void)
33{
34 u32 val;
35 asm volatile("mrc p6, 0, %0, c0, c4, 0":"=r" (val));
36 return val;
37}
38static inline void write_intctl_0(u32 val)
39{
40 asm volatile("mcr p6, 0, %0, c0, c4, 0"::"r" (val));
41}
42
43/* INTCTL1 CP6 R1 Page 4
44 */
45static inline u32 read_intctl_1(void)
46{
47 u32 val;
48 asm volatile("mrc p6, 0, %0, c1, c4, 0":"=r" (val));
49 return val;
50}
51static inline void write_intctl_1(u32 val)
52{
53 asm volatile("mcr p6, 0, %0, c1, c4, 0"::"r" (val));
54}
55
56/* INTCTL2 CP6 R2 Page 4
57 */
58static inline u32 read_intctl_2(void)
59{
60 u32 val;
61 asm volatile("mrc p6, 0, %0, c2, c4, 0":"=r" (val));
62 return val;
63}
64static inline void write_intctl_2(u32 val)
65{
66 asm volatile("mcr p6, 0, %0, c2, c4, 0"::"r" (val));
67}
68
69/* INTCTL3 CP6 R3 Page 4
70 */
71static inline u32 read_intctl_3(void)
72{
73 u32 val;
74 asm volatile("mrc p6, 0, %0, c3, c4, 0":"=r" (val));
75 return val;
76}
77static inline void write_intctl_3(u32 val)
78{
79 asm volatile("mcr p6, 0, %0, c3, c4, 0"::"r" (val));
80}
81
82/* INTSTR0 CP6 R0 Page 5
83 */
84static inline u32 read_intstr_0(void)
85{
86 u32 val;
87 asm volatile("mrc p6, 0, %0, c0, c5, 0":"=r" (val));
88 return val;
89}
90static inline void write_intstr_0(u32 val)
91{
92 asm volatile("mcr p6, 0, %0, c0, c5, 0"::"r" (val));
93}
94
95/* INTSTR1 CP6 R1 Page 5
96 */
97static inline u32 read_intstr_1(void)
98{
99 u32 val;
100 asm volatile("mrc p6, 0, %0, c1, c5, 0":"=r" (val));
101 return val;
102}
103static void write_intstr_1(u32 val)
104{
105 asm volatile("mcr p6, 0, %0, c1, c5, 0"::"r" (val));
106}
107
108/* INTSTR2 CP6 R2 Page 5
109 */
110static inline u32 read_intstr_2(void)
111{
112 u32 val;
113 asm volatile("mrc p6, 0, %0, c2, c5, 0":"=r" (val));
114 return val;
115}
116static void write_intstr_2(u32 val)
117{
118 asm volatile("mcr p6, 0, %0, c2, c5, 0"::"r" (val));
119}
120
121/* INTSTR3 CP6 R3 Page 5
122 */
123static inline u32 read_intstr_3(void)
124{
125 u32 val;
126 asm volatile("mrc p6, 0, %0, c3, c5, 0":"=r" (val));
127 return val;
128}
129static void write_intstr_3(u32 val)
130{
131 asm volatile("mcr p6, 0, %0, c3, c5, 0"::"r" (val));
132}
133
134/* INTBASE CP6 R0 Page 2
135 */
136static inline u32 read_intbase(void)
137{
138 u32 val;
139 asm volatile("mrc p6, 0, %0, c0, c2, 0":"=r" (val));
140 return val;
141}
142static void write_intbase(u32 val)
143{
144 asm volatile("mcr p6, 0, %0, c0, c2, 0"::"r" (val));
145}
146
147/* INTSIZE CP6 R2 Page 2
148 */
149static inline u32 read_intsize(void)
150{
151 u32 val;
152 asm volatile("mrc p6, 0, %0, c2, c2, 0":"=r" (val));
153 return val;
154}
155static void write_intsize(u32 val)
156{
157 asm volatile("mcr p6, 0, %0, c2, c2, 0"::"r" (val));
158}
159
160/* 0 = Interrupt Masked and 1 = Interrupt not masked */
161static void
162iop13xx_irq_mask0 (unsigned int irq)
163{
164 u32 cp_flags = iop13xx_cp6_save();
165 write_intctl_0(read_intctl_0() & ~(1 << (irq - 0)));
166 iop13xx_cp6_restore(cp_flags);
167}
168
169static void
170iop13xx_irq_mask1 (unsigned int irq)
171{
172 u32 cp_flags = iop13xx_cp6_save();
173 write_intctl_1(read_intctl_1() & ~(1 << (irq - 32)));
174 iop13xx_cp6_restore(cp_flags);
175}
176
177static void
178iop13xx_irq_mask2 (unsigned int irq)
179{
180 u32 cp_flags = iop13xx_cp6_save();
181 write_intctl_2(read_intctl_2() & ~(1 << (irq - 64)));
182 iop13xx_cp6_restore(cp_flags);
183}
184
185static void
186iop13xx_irq_mask3 (unsigned int irq)
187{
188 u32 cp_flags = iop13xx_cp6_save();
189 write_intctl_3(read_intctl_3() & ~(1 << (irq - 96)));
190 iop13xx_cp6_restore(cp_flags);
191}
192
193static void
194iop13xx_irq_unmask0(unsigned int irq)
195{
196 u32 cp_flags = iop13xx_cp6_save();
197 write_intctl_0(read_intctl_0() | (1 << (irq - 0)));
198 iop13xx_cp6_restore(cp_flags);
199}
200
201static void
202iop13xx_irq_unmask1(unsigned int irq)
203{
204 u32 cp_flags = iop13xx_cp6_save();
205 write_intctl_1(read_intctl_1() | (1 << (irq - 32)));
206 iop13xx_cp6_restore(cp_flags);
207}
208
209static void
210iop13xx_irq_unmask2(unsigned int irq)
211{
212 u32 cp_flags = iop13xx_cp6_save();
213 write_intctl_2(read_intctl_2() | (1 << (irq - 64)));
214 iop13xx_cp6_restore(cp_flags);
215}
216
217static void
218iop13xx_irq_unmask3(unsigned int irq)
219{
220 u32 cp_flags = iop13xx_cp6_save();
221 write_intctl_3(read_intctl_3() | (1 << (irq - 96)));
222 iop13xx_cp6_restore(cp_flags);
223}
224
225static struct irqchip iop13xx_irqchip0 = {
226 .ack = iop13xx_irq_mask0,
227 .mask = iop13xx_irq_mask0,
228 .unmask = iop13xx_irq_unmask0,
229};
230
231static struct irqchip iop13xx_irqchip1 = {
232 .ack = iop13xx_irq_mask1,
233 .mask = iop13xx_irq_mask1,
234 .unmask = iop13xx_irq_unmask1,
235};
236
237static struct irqchip iop13xx_irqchip2 = {
238 .ack = iop13xx_irq_mask2,
239 .mask = iop13xx_irq_mask2,
240 .unmask = iop13xx_irq_unmask2,
241};
242
243static struct irqchip iop13xx_irqchip3 = {
244 .ack = iop13xx_irq_mask3,
245 .mask = iop13xx_irq_mask3,
246 .unmask = iop13xx_irq_unmask3,
247};
248
249void __init iop13xx_init_irq(void)
250{
251 unsigned int i;
252
253 u32 cp_flags = iop13xx_cp6_save();
254
255 /* disable all interrupts */
256 write_intctl_0(0);
257 write_intctl_1(0);
258 write_intctl_2(0);
259 write_intctl_3(0);
260
261 /* treat all as IRQ */
262 write_intstr_0(0);
263 write_intstr_1(0);
264 write_intstr_2(0);
265 write_intstr_3(0);
266
267 /* initialize the interrupt vector generator */
268 write_intbase(INTBASE);
269 write_intsize(INTSIZE_4);
270
271 for(i = 0; i < NR_IOP13XX_IRQS; i++) {
272 if (i < 32)
273 set_irq_chip(i, &iop13xx_irqchip0);
274 else if (i < 64)
275 set_irq_chip(i, &iop13xx_irqchip1);
276 else if (i < 96)
277 set_irq_chip(i, &iop13xx_irqchip2);
278 else
279 set_irq_chip(i, &iop13xx_irqchip3);
280
281 set_irq_handler(i, do_level_IRQ);
282 set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
283 }
284
285 iop13xx_cp6_restore(cp_flags);
286}
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
new file mode 100644
index 000000000000..89ec70ea3187
--- /dev/null
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -0,0 +1,1113 @@
1/*
2 * iop13xx PCI support
3 * Copyright (c) 2005-2006, Intel Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
16 * Place - Suite 330, Boston, MA 02111-1307 USA.
17 *
18 */
19
20#include <linux/pci.h>
21#include <linux/delay.h>
22
23#include <asm/irq.h>
24#include <asm/hardware.h>
25#include <asm/sizes.h>
26#include <asm/mach/pci.h>
27#include <asm/arch/pci.h>
28
29#define IOP13XX_PCI_DEBUG 0
30#define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x)))
31
32u32 iop13xx_atux_pmmr_offset; /* This offset can change based on strapping */
33u32 iop13xx_atue_pmmr_offset; /* This offset can change based on strapping */
34static struct pci_bus *pci_bus_atux = 0;
35static struct pci_bus *pci_bus_atue = 0;
36u32 iop13xx_atue_mem_base;
37u32 iop13xx_atux_mem_base;
38size_t iop13xx_atue_mem_size;
39size_t iop13xx_atux_mem_size;
40unsigned long iop13xx_pcibios_min_io = 0;
41unsigned long iop13xx_pcibios_min_mem = 0;
42
43EXPORT_SYMBOL(iop13xx_atue_mem_base);
44EXPORT_SYMBOL(iop13xx_atux_mem_base);
45EXPORT_SYMBOL(iop13xx_atue_mem_size);
46EXPORT_SYMBOL(iop13xx_atux_mem_size);
47
48int init_atu = 0; /* Flag to select which ATU(s) to initialize / disable */
49static unsigned long atux_trhfa_timeout = 0; /* Trhfa = RST# high to first
50 access */
51
52/* Scan the initialized busses and ioremap the requested memory range
53 */
54void iop13xx_map_pci_memory(void)
55{
56 int atu;
57 struct pci_bus *bus;
58 struct pci_dev *dev;
59 resource_size_t end = 0;
60
61 for (atu = 0; atu < 2; atu++) {
62 bus = atu ? pci_bus_atue : pci_bus_atux;
63 if (bus) {
64 list_for_each_entry(dev, &bus->devices, bus_list) {
65 int i;
66 int max = 7;
67
68 if (dev->subordinate)
69 max = DEVICE_COUNT_RESOURCE;
70
71 for (i = 0; i < max; i++) {
72 struct resource *res = &dev->resource[i];
73 if (res->flags & IORESOURCE_MEM)
74 end = max(res->end, end);
75 }
76 }
77
78 switch(atu) {
79 case 0:
80 iop13xx_atux_mem_size =
81 (end - IOP13XX_PCIX_LOWER_MEM_RA) + 1;
82
83 /* 16MB align the request */
84 if (iop13xx_atux_mem_size & (SZ_16M - 1)) {
85 iop13xx_atux_mem_size &= ~(SZ_16M - 1);
86 iop13xx_atux_mem_size += SZ_16M;
87 }
88
89 if (end) {
90 iop13xx_atux_mem_base =
91 (u32) __ioremap_pfn(
92 __phys_to_pfn(IOP13XX_PCIX_LOWER_MEM_PA)
93 , 0, iop13xx_atux_mem_size, 0);
94 if (!iop13xx_atux_mem_base) {
95 printk("%s: atux allocation "
96 "failed\n", __FUNCTION__);
97 BUG();
98 }
99 } else
100 iop13xx_atux_mem_size = 0;
101 PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
102 __FUNCTION__, atu, iop13xx_atux_mem_size,
103 iop13xx_atux_mem_base);
104 break;
105 case 1:
106 iop13xx_atue_mem_size =
107 (end - IOP13XX_PCIE_LOWER_MEM_RA) + 1;
108
109 /* 16MB align the request */
110 if (iop13xx_atue_mem_size & (SZ_16M - 1)) {
111 iop13xx_atue_mem_size &= ~(SZ_16M - 1);
112 iop13xx_atue_mem_size += SZ_16M;
113 }
114
115 if (end) {
116 iop13xx_atue_mem_base =
117 (u32) __ioremap_pfn(
118 __phys_to_pfn(IOP13XX_PCIE_LOWER_MEM_PA)
119 , 0, iop13xx_atue_mem_size, 0);
120 if (!iop13xx_atue_mem_base) {
121 printk("%s: atue allocation "
122 "failed\n", __FUNCTION__);
123 BUG();
124 }
125 } else
126 iop13xx_atue_mem_size = 0;
127 PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
128 __FUNCTION__, atu, iop13xx_atue_mem_size,
129 iop13xx_atue_mem_base);
130 break;
131 }
132
133 printk("%s: Initialized (%uM @ resource/virtual: %08lx/%08x)\n",
134 atu ? "ATUE" : "ATUX",
135 (atu ? iop13xx_atue_mem_size : iop13xx_atux_mem_size) /
136 SZ_1M,
137 atu ? IOP13XX_PCIE_LOWER_MEM_RA :
138 IOP13XX_PCIX_LOWER_MEM_RA,
139 atu ? iop13xx_atue_mem_base :
140 iop13xx_atux_mem_base);
141 end = 0;
142 }
143
144 }
145}
146
147static inline int iop13xx_atu_function(int atu)
148{
149 int func = 0;
150 /* the function number depends on the value of the
151 * IOP13XX_INTERFACE_SEL_PCIX reset strap
152 * see C-Spec section 3.17
153 */
154 switch(atu) {
155 case IOP13XX_INIT_ATU_ATUX:
156 if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
157 func = 5;
158 else
159 func = 0;
160 break;
161 case IOP13XX_INIT_ATU_ATUE:
162 if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
163 func = 0;
164 else
165 func = 5;
166 break;
167 default:
168 BUG();
169 }
170
171 return func;
172}
173
174/* iop13xx_atux_cfg_address - format a configuration address for atux
175 * @bus: Target bus to access
176 * @devfn: Combined device number and function number
177 * @where: Desired register's address offset
178 *
179 * Convert the parameters to a configuration address formatted
180 * according the PCI-X 2.0 specification
181 */
182static u32 iop13xx_atux_cfg_address(struct pci_bus *bus, int devfn, int where)
183{
184 struct pci_sys_data *sys = bus->sysdata;
185 u32 addr;
186
187 if (sys->busnr == bus->number)
188 addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
189 else
190 addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
191
192 addr |= PCI_FUNC(devfn) << 8 | ((where & 0xff) & ~3);
193 addr |= ((where & 0xf00) >> 8) << 24; /* upper register number */
194
195 return addr;
196}
197
198/* iop13xx_atue_cfg_address - format a configuration address for atue
199 * @bus: Target bus to access
200 * @devfn: Combined device number and function number
201 * @where: Desired register's address offset
202 *
203 * Convert the parameters to an address usable by the ATUE_OCCAR
204 */
205static u32 iop13xx_atue_cfg_address(struct pci_bus *bus, int devfn, int where)
206{
207 struct pci_sys_data *sys = bus->sysdata;
208 u32 addr;
209
210 PRINTK("iop13xx_atue_cfg_address: bus: %d dev: %d func: %d",
211 bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
212 addr = ((u32) bus->number) << IOP13XX_ATUE_OCCAR_BUS_NUM |
213 ((u32) PCI_SLOT(devfn)) << IOP13XX_ATUE_OCCAR_DEV_NUM |
214 ((u32) PCI_FUNC(devfn)) << IOP13XX_ATUE_OCCAR_FUNC_NUM |
215 (where & ~0x3);
216
217 if (sys->busnr != bus->number)
218 addr |= 1; /* type 1 access */
219
220 return addr;
221}
222
223/* This routine checks the status of the last configuration cycle. If an error
224 * was detected it returns >0, else it returns a 0. The errors being checked
225 * are parity, master abort, target abort (master and target). These types of
226 * errors occure during a config cycle where there is no device, like during
227 * the discovery stage.
228 */
229static int iop13xx_atux_pci_status(int clear)
230{
231 unsigned int status;
232 int err = 0;
233
234 /*
235 * Check the status registers.
236 */
237 status = __raw_readw(IOP13XX_ATUX_ATUSR);
238 if (status & IOP_PCI_STATUS_ERROR)
239 {
240 PRINTK("\t\t\tPCI error: ATUSR %#08x", status);
241 if(clear)
242 __raw_writew(status & IOP_PCI_STATUS_ERROR,
243 IOP13XX_ATUX_ATUSR);
244 err = 1;
245 }
246 status = __raw_readl(IOP13XX_ATUX_ATUISR);
247 if (status & IOP13XX_ATUX_ATUISR_ERROR)
248 {
249 PRINTK("\t\t\tPCI error interrupt: ATUISR %#08x", status);
250 if(clear)
251 __raw_writel(status & IOP13XX_ATUX_ATUISR_ERROR,
252 IOP13XX_ATUX_ATUISR);
253 err = 1;
254 }
255 return err;
256}
257
258/* Simply write the address register and read the configuration
259 * data. Note that the data dependency on %0 encourages an abort
260 * to be detected before we return.
261 */
262static inline u32 iop13xx_atux_read(unsigned long addr)
263{
264 u32 val;
265
266 __asm__ __volatile__(
267 "str %1, [%2]\n\t"
268 "ldr %0, [%3]\n\t"
269 "mov %0, %0\n\t"
270 : "=r" (val)
271 : "r" (addr), "r" (IOP13XX_ATUX_OCCAR), "r" (IOP13XX_ATUX_OCCDR));
272
273 return val;
274}
275
276/* The read routines must check the error status of the last configuration
277 * cycle. If there was an error, the routine returns all hex f's.
278 */
279static int
280iop13xx_atux_read_config(struct pci_bus *bus, unsigned int devfn, int where,
281 int size, u32 *value)
282{
283 unsigned long addr = iop13xx_atux_cfg_address(bus, devfn, where);
284 u32 val = iop13xx_atux_read(addr) >> ((where & 3) * 8);
285
286 if (iop13xx_atux_pci_status(1) || is_atux_occdr_error()) {
287 __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3,
288 IOP13XX_XBG_BECSR);
289 val = 0xffffffff;
290 }
291
292 *value = val;
293
294 return PCIBIOS_SUCCESSFUL;
295}
296
297static int
298iop13xx_atux_write_config(struct pci_bus *bus, unsigned int devfn, int where,
299 int size, u32 value)
300{
301 unsigned long addr = iop13xx_atux_cfg_address(bus, devfn, where);
302 u32 val;
303
304 if (size != 4) {
305 val = iop13xx_atux_read(addr);
306 if (!iop13xx_atux_pci_status(1) == 0)
307 return PCIBIOS_SUCCESSFUL;
308
309 where = (where & 3) * 8;
310
311 if (size == 1)
312 val &= ~(0xff << where);
313 else
314 val &= ~(0xffff << where);
315
316 __raw_writel(val | value << where, IOP13XX_ATUX_OCCDR);
317 } else {
318 __raw_writel(addr, IOP13XX_ATUX_OCCAR);
319 __raw_writel(value, IOP13XX_ATUX_OCCDR);
320 }
321
322 return PCIBIOS_SUCCESSFUL;
323}
324
325static struct pci_ops iop13xx_atux_ops = {
326 .read = iop13xx_atux_read_config,
327 .write = iop13xx_atux_write_config,
328};
329
330/* This routine checks the status of the last configuration cycle. If an error
331 * was detected it returns >0, else it returns a 0. The errors being checked
332 * are parity, master abort, target abort (master and target). These types of
333 * errors occure during a config cycle where there is no device, like during
334 * the discovery stage.
335 */
336static int iop13xx_atue_pci_status(int clear)
337{
338 unsigned int status;
339 int err = 0;
340
341 /*
342 * Check the status registers.
343 */
344
345 /* standard pci status register */
346 status = __raw_readw(IOP13XX_ATUE_ATUSR);
347 if (status & IOP_PCI_STATUS_ERROR) {
348 PRINTK("\t\t\tPCI error: ATUSR %#08x", status);
349 if(clear)
350 __raw_writew(status & IOP_PCI_STATUS_ERROR,
351 IOP13XX_ATUE_ATUSR);
352 err++;
353 }
354
355 /* check the normal status bits in the ATUISR */
356 status = __raw_readl(IOP13XX_ATUE_ATUISR);
357 if (status & IOP13XX_ATUE_ATUISR_ERROR) {
358 PRINTK("\t\t\tPCI error: ATUISR %#08x", status);
359 if (clear)
360 __raw_writew(status & IOP13XX_ATUE_ATUISR_ERROR,
361 IOP13XX_ATUE_ATUISR);
362 err++;
363
364 /* check the PCI-E status if the ATUISR reports an interface error */
365 if (status & IOP13XX_ATUE_STAT_PCI_IFACE_ERR) {
366 /* get the unmasked errors */
367 status = __raw_readl(IOP13XX_ATUE_PIE_STS) &
368 ~(__raw_readl(IOP13XX_ATUE_PIE_MSK));
369
370 if (status) {
371 PRINTK("\t\t\tPCI-E error: ATUE_PIE_STS %#08x",
372 __raw_readl(IOP13XX_ATUE_PIE_STS));
373 err++;
374 } else {
375 PRINTK("\t\t\tPCI-E error: ATUE_PIE_STS %#08x",
376 __raw_readl(IOP13XX_ATUE_PIE_STS));
377 PRINTK("\t\t\tPCI-E error: ATUE_PIE_MSK %#08x",
378 __raw_readl(IOP13XX_ATUE_PIE_MSK));
379 BUG();
380 }
381
382 if(clear)
383 __raw_writel(status, IOP13XX_ATUE_PIE_STS);
384 }
385 }
386
387 return err;
388}
389
390static inline int __init
391iop13xx_pcie_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
392{
393 WARN_ON(idsel != 0);
394
395 switch (pin) {
396 case 1: return ATUE_INTA;
397 case 2: return ATUE_INTB;
398 case 3: return ATUE_INTC;
399 case 4: return ATUE_INTD;
400 default: return -1;
401 }
402}
403
404static inline u32 iop13xx_atue_read(unsigned long addr)
405{
406 u32 val;
407
408 __raw_writel(addr, IOP13XX_ATUE_OCCAR);
409 val = __raw_readl(IOP13XX_ATUE_OCCDR);
410
411 rmb();
412
413 return val;
414}
415
416/* The read routines must check the error status of the last configuration
417 * cycle. If there was an error, the routine returns all hex f's.
418 */
419static int
420iop13xx_atue_read_config(struct pci_bus *bus, unsigned int devfn, int where,
421 int size, u32 *value)
422{
423 u32 val;
424 unsigned long addr = iop13xx_atue_cfg_address(bus, devfn, where);
425
426 /* Hide device numbers > 0 on the local PCI-E bus (Type 0 access) */
427 if (!PCI_SLOT(devfn) || (addr & 1)) {
428 val = iop13xx_atue_read(addr) >> ((where & 3) * 8);
429 if( iop13xx_atue_pci_status(1) || is_atue_occdr_error() ) {
430 __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3,
431 IOP13XX_XBG_BECSR);
432 val = 0xffffffff;
433 }
434
435 PRINTK("addr=%#0lx, val=%#010x", addr, val);
436 } else
437 val = 0xffffffff;
438
439 *value = val;
440
441 return PCIBIOS_SUCCESSFUL;
442}
443
444static int
445iop13xx_atue_write_config(struct pci_bus *bus, unsigned int devfn, int where,
446 int size, u32 value)
447{
448 unsigned long addr = iop13xx_atue_cfg_address(bus, devfn, where);
449 u32 val;
450
451 if (size != 4) {
452 val = iop13xx_atue_read(addr);
453 if (!iop13xx_atue_pci_status(1) == 0)
454 return PCIBIOS_SUCCESSFUL;
455
456 where = (where & 3) * 8;
457
458 if (size == 1)
459 val &= ~(0xff << where);
460 else
461 val &= ~(0xffff << where);
462
463 __raw_writel(val | value << where, IOP13XX_ATUE_OCCDR);
464 } else {
465 __raw_writel(addr, IOP13XX_ATUE_OCCAR);
466 __raw_writel(value, IOP13XX_ATUE_OCCDR);
467 }
468
469 return PCIBIOS_SUCCESSFUL;
470}
471
472static struct pci_ops iop13xx_atue_ops = {
473 .read = iop13xx_atue_read_config,
474 .write = iop13xx_atue_write_config,
475};
476
477/* When a PCI device does not exist during config cycles, the XScale gets a
478 * bus error instead of returning 0xffffffff. We can't rely on the ATU status
479 * bits to tell us that it was indeed a configuration cycle that caused this
480 * error especially in the case when the ATUE link is down. Instead we rely
481 * on data from the south XSI bridge to validate the abort
482 */
483int
484iop13xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
485{
486 PRINTK("Data abort: address = 0x%08lx "
487 "fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx",
488 addr, fsr, regs->ARM_pc, regs->ARM_lr);
489
490 PRINTK("IOP13XX_XBG_BECSR: %#10x", __raw_readl(IOP13XX_XBG_BECSR));
491 PRINTK("IOP13XX_XBG_BERAR: %#10x", __raw_readl(IOP13XX_XBG_BERAR));
492 PRINTK("IOP13XX_XBG_BERUAR: %#10x", __raw_readl(IOP13XX_XBG_BERUAR));
493
494 /* If it was an imprecise abort, then we need to correct the
495 * return address to be _after_ the instruction.
496 */
497 if (fsr & (1 << 10))
498 regs->ARM_pc += 4;
499
500 if (is_atue_occdr_error() || is_atux_occdr_error())
501 return 0;
502 else
503 return 1;
504}
505
506/* Scan an IOP13XX PCI bus. nr selects which ATU we use.
507 */
508struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
509{
510 int which_atu;
511 struct pci_bus *bus = NULL;
512
513 switch (init_atu) {
514 case IOP13XX_INIT_ATU_ATUX:
515 which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUX;
516 break;
517 case IOP13XX_INIT_ATU_ATUE:
518 which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUE;
519 break;
520 case (IOP13XX_INIT_ATU_ATUX | IOP13XX_INIT_ATU_ATUE):
521 which_atu = nr ? IOP13XX_INIT_ATU_ATUE : IOP13XX_INIT_ATU_ATUX;
522 break;
523 default:
524 which_atu = 0;
525 }
526
527 if (!which_atu) {
528 BUG();
529 return NULL;
530 }
531
532 switch (which_atu) {
533 case IOP13XX_INIT_ATU_ATUX:
534 if (time_after_eq(jiffies + msecs_to_jiffies(1000),
535 atux_trhfa_timeout)) /* ensure not wrap */
536 while(time_before(jiffies, atux_trhfa_timeout))
537 udelay(100);
538
539 bus = pci_bus_atux = pci_scan_bus(sys->busnr,
540 &iop13xx_atux_ops,
541 sys);
542 break;
543 case IOP13XX_INIT_ATU_ATUE:
544 bus = pci_bus_atue = pci_scan_bus(sys->busnr,
545 &iop13xx_atue_ops,
546 sys);
547 break;
548 }
549
550 return bus;
551}
552
553/* This function is called from iop13xx_pci_init() after assigning valid
554 * values to iop13xx_atue_pmmr_offset. This is the location for common
555 * setup of ATUE for all IOP13XX implementations.
556 */
557void __init iop13xx_atue_setup(void)
558{
559 int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUE);
560 u32 reg_val;
561
562 /* BAR 1 (1:1 mapping with Physical RAM) */
563 /* Set limit and enable */
564 __raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
565 IOP13XX_ATUE_IALR1);
566 __raw_writel(0x0, IOP13XX_ATUE_IAUBAR1);
567
568 /* Set base at the top of the reserved address space */
569 __raw_writel(PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_TYPE_64 |
570 PCI_BASE_ADDRESS_MEM_PREFETCH, IOP13XX_ATUE_IABAR1);
571
572 /* 1:1 mapping with physical ram
573 * (leave big endian byte swap disabled)
574 */
575 __raw_writel(0x0, IOP13XX_ATUE_IAUTVR1);
576 __raw_writel(PHYS_OFFSET, IOP13XX_ATUE_IATVR1);
577
578 /* Outbound window 1 (PCIX/PCIE memory window) */
579 /* 32 bit Address Space */
580 __raw_writel(0x0, IOP13XX_ATUE_OUMWTVR1);
581 /* PA[35:32] */
582 __raw_writel(IOP13XX_ATUE_OUMBAR_ENABLE |
583 (IOP13XX_PCIE_MEM_PHYS_OFFSET >> 32),
584 IOP13XX_ATUE_OUMBAR1);
585
586 /* Setup the I/O Bar
587 * A[35-16] in 31-12
588 */
589 __raw_writel(((IOP13XX_PCIE_LOWER_IO_PA >> 0x4) & 0xfffff000),
590 IOP13XX_ATUE_OIOBAR);
591 __raw_writel(IOP13XX_PCIE_LOWER_IO_BA, IOP13XX_ATUE_OIOWTVR);
592
593 /* clear startup errors */
594 iop13xx_atue_pci_status(1);
595
596 /* OIOBAR function number
597 */
598 reg_val = __raw_readl(IOP13XX_ATUE_OIOBAR);
599 reg_val &= ~0x7;
600 reg_val |= func;
601 __raw_writel(reg_val, IOP13XX_ATUE_OIOBAR);
602
603 /* OUMBAR function numbers
604 */
605 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR0);
606 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
607 IOP13XX_ATU_OUMBAR_FUNC_NUM);
608 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
609 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR0);
610
611 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR1);
612 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
613 IOP13XX_ATU_OUMBAR_FUNC_NUM);
614 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
615 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR1);
616
617 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR2);
618 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
619 IOP13XX_ATU_OUMBAR_FUNC_NUM);
620 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
621 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR2);
622
623 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR3);
624 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
625 IOP13XX_ATU_OUMBAR_FUNC_NUM);
626 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
627 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR3);
628
629 /* Enable inbound and outbound cycles
630 */
631 reg_val = __raw_readw(IOP13XX_ATUE_ATUCMD);
632 reg_val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
633 PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
634 __raw_writew(reg_val, IOP13XX_ATUE_ATUCMD);
635
636 reg_val = __raw_readl(IOP13XX_ATUE_ATUCR);
637 reg_val |= IOP13XX_ATUE_ATUCR_OUT_EN |
638 IOP13XX_ATUE_ATUCR_IVM;
639 __raw_writel(reg_val, IOP13XX_ATUE_ATUCR);
640}
641
642void __init iop13xx_atue_disable(void)
643{
644 u32 reg_val;
645
646 __raw_writew(0x0, IOP13XX_ATUE_ATUCMD);
647 __raw_writel(IOP13XX_ATUE_ATUCR_IVM, IOP13XX_ATUE_ATUCR);
648
649 /* wait for cycles to quiesce */
650 while (__raw_readl(IOP13XX_ATUE_PCSR) & (IOP13XX_ATUE_PCSR_OUT_Q_BUSY |
651 IOP13XX_ATUE_PCSR_IN_Q_BUSY |
652 IOP13XX_ATUE_PCSR_LLRB_BUSY))
653 cpu_relax();
654
655 /* BAR 0 ( Disabled ) */
656 __raw_writel(0x0, IOP13XX_ATUE_IAUBAR0);
657 __raw_writel(0x0, IOP13XX_ATUE_IABAR0);
658 __raw_writel(0x0, IOP13XX_ATUE_IAUTVR0);
659 __raw_writel(0x0, IOP13XX_ATUE_IATVR0);
660 __raw_writel(0x0, IOP13XX_ATUE_IALR0);
661 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR0);
662 reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
663 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR0);
664
665 /* BAR 1 ( Disabled ) */
666 __raw_writel(0x0, IOP13XX_ATUE_IAUBAR1);
667 __raw_writel(0x0, IOP13XX_ATUE_IABAR1);
668 __raw_writel(0x0, IOP13XX_ATUE_IAUTVR1);
669 __raw_writel(0x0, IOP13XX_ATUE_IATVR1);
670 __raw_writel(0x0, IOP13XX_ATUE_IALR1);
671 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR1);
672 reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
673 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR1);
674
675 /* BAR 2 ( Disabled ) */
676 __raw_writel(0x0, IOP13XX_ATUE_IAUBAR2);
677 __raw_writel(0x0, IOP13XX_ATUE_IABAR2);
678 __raw_writel(0x0, IOP13XX_ATUE_IAUTVR2);
679 __raw_writel(0x0, IOP13XX_ATUE_IATVR2);
680 __raw_writel(0x0, IOP13XX_ATUE_IALR2);
681 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR2);
682 reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
683 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR2);
684
685 /* BAR 3 ( Disabled ) */
686 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR3);
687 reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
688 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR3);
689
690 /* Setup the I/O Bar
691 * A[35-16] in 31-12
692 */
693 __raw_writel((IOP13XX_PCIE_LOWER_IO_PA >> 0x4) & 0xfffff000,
694 IOP13XX_ATUE_OIOBAR);
695 __raw_writel(IOP13XX_PCIE_LOWER_IO_BA, IOP13XX_ATUE_OIOWTVR);
696}
697
698/* This function is called from iop13xx_pci_init() after assigning valid
699 * values to iop13xx_atux_pmmr_offset. This is the location for common
700 * setup of ATUX for all IOP13XX implementations.
701 */
702void __init iop13xx_atux_setup(void)
703{
704 u32 reg_val;
705 int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUX);
706
707 /* Take PCI-X bus out of reset if bootloader hasn't already.
708 * According to spec, we should wait for 2^25 PCI clocks to meet
709 * the PCI timing parameter Trhfa (RST# high to first access).
710 * This is rarely necessary and often ignored.
711 */
712 reg_val = __raw_readl(IOP13XX_ATUX_PCSR);
713 if (reg_val & IOP13XX_ATUX_PCSR_P_RSTOUT) {
714 int msec = (reg_val >> IOP13XX_ATUX_PCSR_FREQ_OFFSET) & 0x7;
715 msec = 1000 / (8-msec); /* bits 100=133MHz, 111=>33MHz */
716 __raw_writel(reg_val & ~IOP13XX_ATUX_PCSR_P_RSTOUT,
717 IOP13XX_ATUX_PCSR);
718 atux_trhfa_timeout = jiffies + msecs_to_jiffies(msec);
719 }
720 else
721 atux_trhfa_timeout = jiffies;
722
723 /* BAR 1 (1:1 mapping with Physical RAM) */
724 /* Set limit and enable */
725 __raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
726 IOP13XX_ATUX_IALR1);
727 __raw_writel(0x0, IOP13XX_ATUX_IAUBAR1);
728
729 /* Set base at the top of the reserved address space */
730 __raw_writel(PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_TYPE_64 |
731 PCI_BASE_ADDRESS_MEM_PREFETCH, IOP13XX_ATUX_IABAR1);
732
733 /* 1:1 mapping with physical ram
734 * (leave big endian byte swap disabled)
735 */
736 __raw_writel(0x0, IOP13XX_ATUX_IAUTVR1);
737 __raw_writel(PHYS_OFFSET, IOP13XX_ATUX_IATVR1);
738
739 /* Outbound window 1 (PCIX/PCIE memory window) */
740 /* 32 bit Address Space */
741 __raw_writel(0x0, IOP13XX_ATUX_OUMWTVR1);
742 /* PA[35:32] */
743 __raw_writel(IOP13XX_ATUX_OUMBAR_ENABLE |
744 IOP13XX_PCIX_MEM_PHYS_OFFSET >> 32,
745 IOP13XX_ATUX_OUMBAR1);
746
747 /* Setup the I/O Bar
748 * A[35-16] in 31-12
749 */
750 __raw_writel((IOP13XX_PCIX_LOWER_IO_PA >> 0x4) & 0xfffff000,
751 IOP13XX_ATUX_OIOBAR);
752 __raw_writel(IOP13XX_PCIX_LOWER_IO_BA, IOP13XX_ATUX_OIOWTVR);
753
754 /* clear startup errors */
755 iop13xx_atux_pci_status(1);
756
757 /* OIOBAR function number
758 */
759 reg_val = __raw_readl(IOP13XX_ATUX_OIOBAR);
760 reg_val &= ~0x7;
761 reg_val |= func;
762 __raw_writel(reg_val, IOP13XX_ATUX_OIOBAR);
763
764 /* OUMBAR function numbers
765 */
766 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR0);
767 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
768 IOP13XX_ATU_OUMBAR_FUNC_NUM);
769 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
770 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR0);
771
772 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR1);
773 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
774 IOP13XX_ATU_OUMBAR_FUNC_NUM);
775 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
776 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR1);
777
778 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR2);
779 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
780 IOP13XX_ATU_OUMBAR_FUNC_NUM);
781 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
782 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR2);
783
784 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR3);
785 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
786 IOP13XX_ATU_OUMBAR_FUNC_NUM);
787 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
788 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR3);
789
790 /* Enable inbound and outbound cycles
791 */
792 reg_val = __raw_readw(IOP13XX_ATUX_ATUCMD);
793 reg_val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
794 PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
795 __raw_writew(reg_val, IOP13XX_ATUX_ATUCMD);
796
797 reg_val = __raw_readl(IOP13XX_ATUX_ATUCR);
798 reg_val |= IOP13XX_ATUX_ATUCR_OUT_EN;
799 __raw_writel(reg_val, IOP13XX_ATUX_ATUCR);
800}
801
802void __init iop13xx_atux_disable(void)
803{
804 u32 reg_val;
805
806 __raw_writew(0x0, IOP13XX_ATUX_ATUCMD);
807 __raw_writel(0x0, IOP13XX_ATUX_ATUCR);
808
809 /* wait for cycles to quiesce */
810 while (__raw_readl(IOP13XX_ATUX_PCSR) & (IOP13XX_ATUX_PCSR_OUT_Q_BUSY |
811 IOP13XX_ATUX_PCSR_IN_Q_BUSY))
812 cpu_relax();
813
814 /* BAR 0 ( Disabled ) */
815 __raw_writel(0x0, IOP13XX_ATUX_IAUBAR0);
816 __raw_writel(0x0, IOP13XX_ATUX_IABAR0);
817 __raw_writel(0x0, IOP13XX_ATUX_IAUTVR0);
818 __raw_writel(0x0, IOP13XX_ATUX_IATVR0);
819 __raw_writel(0x0, IOP13XX_ATUX_IALR0);
820 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR0);
821 reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
822 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR0);
823
824 /* BAR 1 ( Disabled ) */
825 __raw_writel(0x0, IOP13XX_ATUX_IAUBAR1);
826 __raw_writel(0x0, IOP13XX_ATUX_IABAR1);
827 __raw_writel(0x0, IOP13XX_ATUX_IAUTVR1);
828 __raw_writel(0x0, IOP13XX_ATUX_IATVR1);
829 __raw_writel(0x0, IOP13XX_ATUX_IALR1);
830 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR1);
831 reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
832 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR1);
833
834 /* BAR 2 ( Disabled ) */
835 __raw_writel(0x0, IOP13XX_ATUX_IAUBAR2);
836 __raw_writel(0x0, IOP13XX_ATUX_IABAR2);
837 __raw_writel(0x0, IOP13XX_ATUX_IAUTVR2);
838 __raw_writel(0x0, IOP13XX_ATUX_IATVR2);
839 __raw_writel(0x0, IOP13XX_ATUX_IALR2);
840 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR2);
841 reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
842 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR2);
843
844 /* BAR 3 ( Disabled ) */
845 __raw_writel(0x0, IOP13XX_ATUX_IAUBAR3);
846 __raw_writel(0x0, IOP13XX_ATUX_IABAR3);
847 __raw_writel(0x0, IOP13XX_ATUX_IAUTVR3);
848 __raw_writel(0x0, IOP13XX_ATUX_IATVR3);
849 __raw_writel(0x0, IOP13XX_ATUX_IALR3);
850 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR3);
851 reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
852 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR3);
853
854 /* Setup the I/O Bar
855 * A[35-16] in 31-12
856 */
857 __raw_writel((IOP13XX_PCIX_LOWER_IO_PA >> 0x4) & 0xfffff000,
858 IOP13XX_ATUX_OIOBAR);
859 __raw_writel(IOP13XX_PCIX_LOWER_IO_BA, IOP13XX_ATUX_OIOWTVR);
860}
861
862void __init iop13xx_set_atu_mmr_bases(void)
863{
864 /* Based on ESSR0, determine the ATU X/E offsets */
865 switch(__raw_readl(IOP13XX_ESSR0) &
866 (IOP13XX_CONTROLLER_ONLY | IOP13XX_INTERFACE_SEL_PCIX)) {
867 /* both asserted */
868 case 0:
869 iop13xx_atux_pmmr_offset = IOP13XX_ATU1_PMMR_OFFSET;
870 iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
871 break;
872 /* IOP13XX_CONTROLLER_ONLY = deasserted
873 * IOP13XX_INTERFACE_SEL_PCIX = asserted
874 */
875 case IOP13XX_CONTROLLER_ONLY:
876 iop13xx_atux_pmmr_offset = IOP13XX_ATU0_PMMR_OFFSET;
877 iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
878 break;
879 /* IOP13XX_CONTROLLER_ONLY = asserted
880 * IOP13XX_INTERFACE_SEL_PCIX = deasserted
881 */
882 case IOP13XX_INTERFACE_SEL_PCIX:
883 iop13xx_atux_pmmr_offset = IOP13XX_ATU1_PMMR_OFFSET;
884 iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
885 break;
886 /* both deasserted */
887 case IOP13XX_CONTROLLER_ONLY | IOP13XX_INTERFACE_SEL_PCIX:
888 iop13xx_atux_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
889 iop13xx_atue_pmmr_offset = IOP13XX_ATU0_PMMR_OFFSET;
890 break;
891 default:
892 BUG();
893 }
894}
895
896void __init iop13xx_atu_select(struct hw_pci *plat_pci)
897{
898 int i;
899
900 /* set system defaults
901 * note: if "iop13xx_init_atu=" is specified this autodetect
902 * sequence will be bypassed
903 */
904 if (init_atu == IOP13XX_INIT_ATU_DEFAULT) {
905 /* check for single/dual interface */
906 if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX) {
907 /* ATUE must be present check the device id
908 * to see if ATUX is present.
909 */
910 init_atu |= IOP13XX_INIT_ATU_ATUE;
911 switch (__raw_readw(IOP13XX_ATUE_DID) & 0xf0) {
912 case 0x70:
913 case 0x80:
914 case 0xc0:
915 init_atu |= IOP13XX_INIT_ATU_ATUX;
916 break;
917 }
918 } else {
919 /* ATUX must be present check the device id
920 * to see if ATUE is present.
921 */
922 init_atu |= IOP13XX_INIT_ATU_ATUX;
923 switch (__raw_readw(IOP13XX_ATUX_DID) & 0xf0) {
924 case 0x70:
925 case 0x80:
926 case 0xc0:
927 init_atu |= IOP13XX_INIT_ATU_ATUE;
928 break;
929 }
930 }
931
932 /* check central resource and root complex capability */
933 if (init_atu & IOP13XX_INIT_ATU_ATUX)
934 if (!(__raw_readl(IOP13XX_ATUX_PCSR) &
935 IOP13XX_ATUX_PCSR_CENTRAL_RES))
936 init_atu &= ~IOP13XX_INIT_ATU_ATUX;
937
938 if (init_atu & IOP13XX_INIT_ATU_ATUE)
939 if (__raw_readl(IOP13XX_ATUE_PCSR) &
940 IOP13XX_ATUE_PCSR_END_POINT)
941 init_atu &= ~IOP13XX_INIT_ATU_ATUE;
942 }
943
944 for (i = 0; i < 2; i++) {
945 if((init_atu & (1 << i)) == (1 << i))
946 plat_pci->nr_controllers++;
947 }
948}
949
950void __init iop13xx_pci_init(void)
951{
952 /* clear pre-existing south bridge errors */
953 __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3, IOP13XX_XBG_BECSR);
954
955 /* Setup the Min Address for PCI memory... */
956 iop13xx_pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA;
957
958 /* if Linux is given control of an ATU
959 * clear out its prior configuration,
960 * otherwise do not touch the registers
961 */
962 if (init_atu & IOP13XX_INIT_ATU_ATUE) {
963 iop13xx_atue_disable();
964 iop13xx_atue_setup();
965 }
966
967 if (init_atu & IOP13XX_INIT_ATU_ATUX) {
968 iop13xx_atux_disable();
969 iop13xx_atux_setup();
970 }
971
972 hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS,
973 "imprecise external abort");
974}
975
976/* intialize the pci memory space. handle any combination of
977 * atue and atux enabled/disabled
978 */
979int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
980{
981 struct resource *res;
982 int which_atu;
983 u32 pcixsr, pcsr;
984
985 if (nr > 1)
986 return 0;
987
988 res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
989 if (!res)
990 panic("PCI: unable to alloc resources");
991
992 memset(res, 0, sizeof(struct resource) * 2);
993
994 /* 'nr' assumptions:
995 * ATUX is always 0
996 * ATUE is 1 when ATUX is also enabled
997 * ATUE is 0 when ATUX is disabled
998 */
999 switch(init_atu) {
1000 case IOP13XX_INIT_ATU_ATUX:
1001 which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUX;
1002 break;
1003 case IOP13XX_INIT_ATU_ATUE:
1004 which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUE;
1005 break;
1006 case (IOP13XX_INIT_ATU_ATUX | IOP13XX_INIT_ATU_ATUE):
1007 which_atu = nr ? IOP13XX_INIT_ATU_ATUE : IOP13XX_INIT_ATU_ATUX;
1008 break;
1009 default:
1010 which_atu = 0;
1011 }
1012
1013 if (!which_atu)
1014 return 0;
1015
1016 switch(which_atu) {
1017 case IOP13XX_INIT_ATU_ATUX:
1018 pcixsr = __raw_readl(IOP13XX_ATUX_PCIXSR);
1019 pcixsr &= ~0xffff;
1020 pcixsr |= sys->busnr << IOP13XX_ATUX_PCIXSR_BUS_NUM |
1021 0 << IOP13XX_ATUX_PCIXSR_DEV_NUM |
1022 iop13xx_atu_function(IOP13XX_INIT_ATU_ATUX)
1023 << IOP13XX_ATUX_PCIXSR_FUNC_NUM;
1024 __raw_writel(pcixsr, IOP13XX_ATUX_PCIXSR);
1025
1026 res[0].start = IOP13XX_PCIX_LOWER_IO_PA;
1027 res[0].end = IOP13XX_PCIX_UPPER_IO_PA;
1028 res[0].name = "IQ81340 ATUX PCI I/O Space";
1029 res[0].flags = IORESOURCE_IO;
1030
1031 res[1].start = IOP13XX_PCIX_LOWER_MEM_RA;
1032 res[1].end = IOP13XX_PCIX_UPPER_MEM_RA;
1033 res[1].name = "IQ81340 ATUX PCI Memory Space";
1034 res[1].flags = IORESOURCE_MEM;
1035 sys->mem_offset = IOP13XX_PCIX_MEM_OFFSET;
1036 sys->io_offset = IOP13XX_PCIX_IO_OFFSET;
1037 break;
1038 case IOP13XX_INIT_ATU_ATUE:
1039 /* Note: the function number field in the PCSR is ro */
1040 pcsr = __raw_readl(IOP13XX_ATUE_PCSR);
1041 pcsr &= ~(0xfff8 << 16);
1042 pcsr |= sys->busnr << IOP13XX_ATUE_PCSR_BUS_NUM |
1043 0 << IOP13XX_ATUE_PCSR_DEV_NUM;
1044
1045 __raw_writel(pcsr, IOP13XX_ATUE_PCSR);
1046
1047 res[0].start = IOP13XX_PCIE_LOWER_IO_PA;
1048 res[0].end = IOP13XX_PCIE_UPPER_IO_PA;
1049 res[0].name = "IQ81340 ATUE PCI I/O Space";
1050 res[0].flags = IORESOURCE_IO;
1051
1052 res[1].start = IOP13XX_PCIE_LOWER_MEM_RA;
1053 res[1].end = IOP13XX_PCIE_UPPER_MEM_RA;
1054 res[1].name = "IQ81340 ATUE PCI Memory Space";
1055 res[1].flags = IORESOURCE_MEM;
1056 sys->mem_offset = IOP13XX_PCIE_MEM_OFFSET;
1057 sys->io_offset = IOP13XX_PCIE_IO_OFFSET;
1058 sys->map_irq = iop13xx_pcie_map_irq;
1059 break;
1060 default:
1061 return 0;
1062 }
1063
1064 request_resource(&ioport_resource, &res[0]);
1065 request_resource(&iomem_resource, &res[1]);
1066
1067 sys->resource[0] = &res[0];
1068 sys->resource[1] = &res[1];
1069 sys->resource[2] = NULL;
1070
1071 return 1;
1072}
1073
1074u16 iop13xx_dev_id(void)
1075{
1076 if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
1077 return __raw_readw(IOP13XX_ATUE_DID);
1078 else
1079 return __raw_readw(IOP13XX_ATUX_DID);
1080}
1081
1082static int __init iop13xx_init_atu_setup(char *str)
1083{
1084 init_atu = IOP13XX_INIT_ATU_NONE;
1085 if (str) {
1086 while (*str != '\0') {
1087 switch (*str) {
1088 case 'x':
1089 case 'X':
1090 init_atu |= IOP13XX_INIT_ATU_ATUX;
1091 init_atu &= ~IOP13XX_INIT_ATU_NONE;
1092 break;
1093 case 'e':
1094 case 'E':
1095 init_atu |= IOP13XX_INIT_ATU_ATUE;
1096 init_atu &= ~IOP13XX_INIT_ATU_NONE;
1097 break;
1098 case ',':
1099 case '=':
1100 break;
1101 default:
1102 PRINTK("\"iop13xx_init_atu\" malformed at "
1103 "character: \'%c\'", *str);
1104 *(str + 1) = '\0';
1105 init_atu = IOP13XX_INIT_ATU_DEFAULT;
1106 }
1107 str++;
1108 }
1109 }
1110 return 1;
1111}
1112
1113__setup("iop13xx_init_atu", iop13xx_init_atu_setup);
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
new file mode 100644
index 000000000000..3756d2ccb1a7
--- /dev/null
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -0,0 +1,406 @@
1/*
2 * iop13xx platform Initialization
3 * Copyright (c) 2005-2006, Intel Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
16 * Place - Suite 330, Boston, MA 02111-1307 USA.
17 *
18 */
19
20#include <linux/serial_8250.h>
21#ifdef CONFIG_MTD_PHYSMAP
22#include <linux/mtd/physmap.h>
23#endif
24#include <asm/mach/map.h>
25#include <asm/hardware.h>
26#include <asm/irq.h>
27
28#define IOP13XX_UART_XTAL 33334000
29#define IOP13XX_SETUP_DEBUG 0
30#define PRINTK(x...) ((void)(IOP13XX_SETUP_DEBUG && printk(x)))
31
32/* Standard IO mapping for all IOP13XX based systems
33 */
34static struct map_desc iop13xx_std_desc[] __initdata = {
35 { /* mem mapped registers */
36 .virtual = IOP13XX_PMMR_VIRT_MEM_BASE,
37 .pfn = __phys_to_pfn(IOP13XX_PMMR_PHYS_MEM_BASE),
38 .length = IOP13XX_PMMR_SIZE,
39 .type = MT_DEVICE,
40 }, { /* PCIE IO space */
41 .virtual = IOP13XX_PCIE_LOWER_IO_VA,
42 .pfn = __phys_to_pfn(IOP13XX_PCIE_LOWER_IO_PA),
43 .length = IOP13XX_PCIX_IO_WINDOW_SIZE,
44 .type = MT_DEVICE,
45 }, { /* PCIX IO space */
46 .virtual = IOP13XX_PCIX_LOWER_IO_VA,
47 .pfn = __phys_to_pfn(IOP13XX_PCIX_LOWER_IO_PA),
48 .length = IOP13XX_PCIX_IO_WINDOW_SIZE,
49 .type = MT_DEVICE,
50 },
51};
52
53static struct resource iop13xx_uart0_resources[] = {
54 [0] = {
55 .start = IOP13XX_UART0_PHYS,
56 .end = IOP13XX_UART0_PHYS + 0x3f,
57 .flags = IORESOURCE_MEM,
58 },
59 [1] = {
60 .start = IRQ_IOP13XX_UART0,
61 .end = IRQ_IOP13XX_UART0,
62 .flags = IORESOURCE_IRQ
63 }
64};
65
66static struct resource iop13xx_uart1_resources[] = {
67 [0] = {
68 .start = IOP13XX_UART1_PHYS,
69 .end = IOP13XX_UART1_PHYS + 0x3f,
70 .flags = IORESOURCE_MEM,
71 },
72 [1] = {
73 .start = IRQ_IOP13XX_UART1,
74 .end = IRQ_IOP13XX_UART1,
75 .flags = IORESOURCE_IRQ
76 }
77};
78
79static struct plat_serial8250_port iop13xx_uart0_data[] = {
80 {
81 .membase = (char*)(IOP13XX_UART0_VIRT),
82 .mapbase = (IOP13XX_UART0_PHYS),
83 .irq = IRQ_IOP13XX_UART0,
84 .uartclk = IOP13XX_UART_XTAL,
85 .regshift = 2,
86 .iotype = UPIO_MEM,
87 .flags = UPF_SKIP_TEST,
88 },
89 { },
90};
91
92static struct plat_serial8250_port iop13xx_uart1_data[] = {
93 {
94 .membase = (char*)(IOP13XX_UART1_VIRT),
95 .mapbase = (IOP13XX_UART1_PHYS),
96 .irq = IRQ_IOP13XX_UART1,
97 .uartclk = IOP13XX_UART_XTAL,
98 .regshift = 2,
99 .iotype = UPIO_MEM,
100 .flags = UPF_SKIP_TEST,
101 },
102 { },
103};
104
105/* The ids are fixed up later in iop13xx_platform_init */
106static struct platform_device iop13xx_uart0 = {
107 .name = "serial8250",
108 .id = 0,
109 .dev.platform_data = iop13xx_uart0_data,
110 .num_resources = 2,
111 .resource = iop13xx_uart0_resources,
112};
113
114static struct platform_device iop13xx_uart1 = {
115 .name = "serial8250",
116 .id = 0,
117 .dev.platform_data = iop13xx_uart1_data,
118 .num_resources = 2,
119 .resource = iop13xx_uart1_resources
120};
121
122static struct resource iop13xx_i2c_0_resources[] = {
123 [0] = {
124 .start = IOP13XX_I2C0_PHYS,
125 .end = IOP13XX_I2C0_PHYS + 0x18,
126 .flags = IORESOURCE_MEM,
127 },
128 [1] = {
129 .start = IRQ_IOP13XX_I2C_0,
130 .end = IRQ_IOP13XX_I2C_0,
131 .flags = IORESOURCE_IRQ
132 }
133};
134
135static struct resource iop13xx_i2c_1_resources[] = {
136 [0] = {
137 .start = IOP13XX_I2C1_PHYS,
138 .end = IOP13XX_I2C1_PHYS + 0x18,
139 .flags = IORESOURCE_MEM,
140 },
141 [1] = {
142 .start = IRQ_IOP13XX_I2C_1,
143 .end = IRQ_IOP13XX_I2C_1,
144 .flags = IORESOURCE_IRQ
145 }
146};
147
148static struct resource iop13xx_i2c_2_resources[] = {
149 [0] = {
150 .start = IOP13XX_I2C2_PHYS,
151 .end = IOP13XX_I2C2_PHYS + 0x18,
152 .flags = IORESOURCE_MEM,
153 },
154 [1] = {
155 .start = IRQ_IOP13XX_I2C_2,
156 .end = IRQ_IOP13XX_I2C_2,
157 .flags = IORESOURCE_IRQ
158 }
159};
160
161/* I2C controllers. The IOP13XX uses the same block as the IOP3xx, so
162 * we just use the same device name.
163 */
164
165/* The ids are fixed up later in iop13xx_platform_init */
166static struct platform_device iop13xx_i2c_0_controller = {
167 .name = "IOP3xx-I2C",
168 .id = 0,
169 .num_resources = 2,
170 .resource = iop13xx_i2c_0_resources
171};
172
173static struct platform_device iop13xx_i2c_1_controller = {
174 .name = "IOP3xx-I2C",
175 .id = 0,
176 .num_resources = 2,
177 .resource = iop13xx_i2c_1_resources
178};
179
180static struct platform_device iop13xx_i2c_2_controller = {
181 .name = "IOP3xx-I2C",
182 .id = 0,
183 .num_resources = 2,
184 .resource = iop13xx_i2c_2_resources
185};
186
187#ifdef CONFIG_MTD_PHYSMAP
188/* PBI Flash Device
189 */
190static struct physmap_flash_data iq8134x_flash_data = {
191 .width = 2,
192};
193
194static struct resource iq8134x_flash_resource = {
195 .start = IQ81340_FLASHBASE,
196 .end = 0,
197 .flags = IORESOURCE_MEM,
198};
199
200static struct platform_device iq8134x_flash = {
201 .name = "physmap-flash",
202 .id = 0,
203 .dev = { .platform_data = &iq8134x_flash_data, },
204 .num_resources = 1,
205 .resource = &iq8134x_flash_resource,
206};
207
208static unsigned long iq8134x_probe_flash_size(void)
209{
210 uint8_t __iomem *flash_addr = ioremap(IQ81340_FLASHBASE, PAGE_SIZE);
211 int i;
212 char query[3];
213 unsigned long size = 0;
214 int width = iq8134x_flash_data.width;
215
216 if (flash_addr) {
217 /* send CFI 'query' command */
218 writew(0x98, flash_addr);
219
220 /* check for CFI compliance */
221 for (i = 0; i < 3 * width; i += width)
222 query[i / width] = readb(flash_addr + (0x10 * width) + i);
223
224 /* read the size */
225 if (memcmp(query, "QRY", 3) == 0)
226 size = 1 << readb(flash_addr + (0x27 * width));
227
228 /* send CFI 'read array' command */
229 writew(0xff, flash_addr);
230
231 iounmap(flash_addr);
232 }
233
234 return size;
235}
236#endif
237
238void __init iop13xx_map_io(void)
239{
240 /* Initialize the Static Page Table maps */
241 iotable_init(iop13xx_std_desc, ARRAY_SIZE(iop13xx_std_desc));
242}
243
244static int init_uart = 0;
245static int init_i2c = 0;
246
247void __init iop13xx_platform_init(void)
248{
249 int i;
250 u32 uart_idx, i2c_idx, plat_idx;
251 struct platform_device *iop13xx_devices[IQ81340_MAX_PLAT_DEVICES];
252
253 /* set the bases so we can read the device id */
254 iop13xx_set_atu_mmr_bases();
255
256 memset(iop13xx_devices, 0, sizeof(iop13xx_devices));
257
258 if (init_uart == IOP13XX_INIT_UART_DEFAULT) {
259 switch (iop13xx_dev_id()) {
260 /* enable both uarts on iop341 and iop342 */
261 case 0x3380:
262 case 0x3384:
263 case 0x3388:
264 case 0x338c:
265 case 0x3382:
266 case 0x3386:
267 case 0x338a:
268 case 0x338e:
269 init_uart |= IOP13XX_INIT_UART_0;
270 init_uart |= IOP13XX_INIT_UART_1;
271 break;
272 /* only enable uart 1 */
273 default:
274 init_uart |= IOP13XX_INIT_UART_1;
275 }
276 }
277
278 if (init_i2c == IOP13XX_INIT_I2C_DEFAULT) {
279 switch (iop13xx_dev_id()) {
280 /* enable all i2c units on iop341 and iop342 */
281 case 0x3380:
282 case 0x3384:
283 case 0x3388:
284 case 0x338c:
285 case 0x3382:
286 case 0x3386:
287 case 0x338a:
288 case 0x338e:
289 init_i2c |= IOP13XX_INIT_I2C_0;
290 init_i2c |= IOP13XX_INIT_I2C_1;
291 init_i2c |= IOP13XX_INIT_I2C_2;
292 break;
293 /* only enable i2c 1 and 2 */
294 default:
295 init_i2c |= IOP13XX_INIT_I2C_1;
296 init_i2c |= IOP13XX_INIT_I2C_2;
297 }
298 }
299
300 plat_idx = 0;
301 uart_idx = 0;
302 i2c_idx = 0;
303
304 /* uart 1 (if enabled) is ttyS0 */
305 if (init_uart & IOP13XX_INIT_UART_1) {
306 PRINTK("Adding uart1 to platform device list\n");
307 iop13xx_uart1.id = uart_idx++;
308 iop13xx_devices[plat_idx++] = &iop13xx_uart1;
309 }
310 if (init_uart & IOP13XX_INIT_UART_0) {
311 PRINTK("Adding uart0 to platform device list\n");
312 iop13xx_uart0.id = uart_idx++;
313 iop13xx_devices[plat_idx++] = &iop13xx_uart0;
314 }
315
316 for(i = 0; i < IQ81340_NUM_I2C; i++) {
317 if ((init_i2c & (1 << i)) && IOP13XX_SETUP_DEBUG)
318 printk("Adding i2c%d to platform device list\n", i);
319 switch(init_i2c & (1 << i)) {
320 case IOP13XX_INIT_I2C_0:
321 iop13xx_i2c_0_controller.id = i2c_idx++;
322 iop13xx_devices[plat_idx++] =
323 &iop13xx_i2c_0_controller;
324 break;
325 case IOP13XX_INIT_I2C_1:
326 iop13xx_i2c_1_controller.id = i2c_idx++;
327 iop13xx_devices[plat_idx++] =
328 &iop13xx_i2c_1_controller;
329 break;
330 case IOP13XX_INIT_I2C_2:
331 iop13xx_i2c_2_controller.id = i2c_idx++;
332 iop13xx_devices[plat_idx++] =
333 &iop13xx_i2c_2_controller;
334 break;
335 }
336 }
337
338#ifdef CONFIG_MTD_PHYSMAP
339 iq8134x_flash_resource.end = iq8134x_flash_resource.start +
340 iq8134x_probe_flash_size();
341 if (iq8134x_flash_resource.end > iq8134x_flash_resource.start)
342 iop13xx_devices[plat_idx++] = &iq8134x_flash;
343 else
344 printk(KERN_ERR "%s: Failed to probe flash size\n", __FUNCTION__);
345#endif
346
347 platform_add_devices(iop13xx_devices, plat_idx);
348}
349
350static int __init iop13xx_init_uart_setup(char *str)
351{
352 if (str) {
353 while (*str != '\0') {
354 switch(*str) {
355 case '0':
356 init_uart |= IOP13XX_INIT_UART_0;
357 break;
358 case '1':
359 init_uart |= IOP13XX_INIT_UART_1;
360 break;
361 case ',':
362 case '=':
363 break;
364 default:
365 PRINTK("\"iop13xx_init_uart\" malformed"
366 " at character: \'%c\'", *str);
367 *(str + 1) = '\0';
368 init_uart = IOP13XX_INIT_UART_DEFAULT;
369 }
370 str++;
371 }
372 }
373 return 1;
374}
375
376static int __init iop13xx_init_i2c_setup(char *str)
377{
378 if (str) {
379 while (*str != '\0') {
380 switch(*str) {
381 case '0':
382 init_i2c |= IOP13XX_INIT_I2C_0;
383 break;
384 case '1':
385 init_i2c |= IOP13XX_INIT_I2C_1;
386 break;
387 case '2':
388 init_i2c |= IOP13XX_INIT_I2C_2;
389 break;
390 case ',':
391 case '=':
392 break;
393 default:
394 PRINTK("\"iop13xx_init_i2c\" malformed"
395 " at character: \'%c\'", *str);
396 *(str + 1) = '\0';
397 init_i2c = IOP13XX_INIT_I2C_DEFAULT;
398 }
399 str++;
400 }
401 }
402 return 1;
403}
404
405__setup("iop13xx_init_uart", iop13xx_init_uart_setup);
406__setup("iop13xx_init_i2c", iop13xx_init_i2c_setup);
diff --git a/arch/arm/mach-iop13xx/time.c b/arch/arm/mach-iop13xx/time.c
new file mode 100644
index 000000000000..8b21365f653f
--- /dev/null
+++ b/arch/arm/mach-iop13xx/time.c
@@ -0,0 +1,102 @@
1/*
2 * arch/arm/mach-iop13xx/time.c
3 *
4 * Timer code for IOP13xx (copied from IOP32x/IOP33x implementation)
5 *
6 * Author: Deepak Saxena <dsaxena@mvista.com>
7 *
8 * Copyright 2002-2003 MontaVista Software Inc.
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 */
15
16#include <linux/kernel.h>
17#include <linux/interrupt.h>
18#include <linux/time.h>
19#include <linux/init.h>
20#include <linux/timex.h>
21#include <asm/io.h>
22#include <asm/irq.h>
23#include <asm/uaccess.h>
24#include <asm/mach/irq.h>
25#include <asm/mach/time.h>
26
27static unsigned long ticks_per_jiffy;
28static unsigned long ticks_per_usec;
29static unsigned long next_jiffy_time;
30
31static inline u32 read_tcr1(void)
32{
33 u32 val;
34 asm volatile("mrc p6, 0, %0, c3, c9, 0" : "=r" (val));
35 return val;
36}
37
38unsigned long iop13xx_gettimeoffset(void)
39{
40 unsigned long offset;
41 u32 cp_flags;
42
43 cp_flags = iop13xx_cp6_save();
44 offset = next_jiffy_time - read_tcr1();
45 iop13xx_cp6_restore(cp_flags);
46
47 return offset / ticks_per_usec;
48}
49
50static irqreturn_t
51iop13xx_timer_interrupt(int irq, void *dev_id)
52{
53 u32 cp_flags = iop13xx_cp6_save();
54
55 write_seqlock(&xtime_lock);
56
57 asm volatile("mcr p6, 0, %0, c6, c9, 0" : : "r" (1));
58
59 while ((signed long)(next_jiffy_time - read_tcr1())
60 >= ticks_per_jiffy) {
61 timer_tick();
62 next_jiffy_time -= ticks_per_jiffy;
63 }
64
65 write_sequnlock(&xtime_lock);
66
67 iop13xx_cp6_restore(cp_flags);
68
69 return IRQ_HANDLED;
70}
71
72static struct irqaction iop13xx_timer_irq = {
73 .name = "IOP13XX Timer Tick",
74 .handler = iop13xx_timer_interrupt,
75 .flags = IRQF_DISABLED | IRQF_TIMER,
76};
77
78void __init iop13xx_init_time(unsigned long tick_rate)
79{
80 u32 timer_ctl;
81 u32 cp_flags;
82
83 ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
84 ticks_per_usec = tick_rate / 1000000;
85 next_jiffy_time = 0xffffffff;
86
87 timer_ctl = IOP13XX_TMR_EN | IOP13XX_TMR_PRIVILEGED |
88 IOP13XX_TMR_RELOAD | IOP13XX_TMR_RATIO_1_1;
89
90 /*
91 * We use timer 0 for our timer interrupt, and timer 1 as
92 * monotonic counter for tracking missed jiffies.
93 */
94 cp_flags = iop13xx_cp6_save();
95 asm volatile("mcr p6, 0, %0, c4, c9, 0" : : "r" (ticks_per_jiffy - 1));
96 asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (timer_ctl));
97 asm volatile("mcr p6, 0, %0, c5, c9, 0" : : "r" (0xffffffff));
98 asm volatile("mcr p6, 0, %0, c1, c9, 0" : : "r" (timer_ctl));
99 iop13xx_cp6_restore(cp_flags);
100
101 setup_irq(IRQ_IOP13XX_TIMER0, &iop13xx_timer_irq);
102}
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c0bfb8212b77..4c4dae6901fc 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -333,7 +333,7 @@ config CPU_XSCALE
333# XScale Core Version 3 333# XScale Core Version 3
334config CPU_XSC3 334config CPU_XSC3
335 bool 335 bool
336 depends on ARCH_IXP23XX 336 depends on ARCH_IXP23XX || ARCH_IOP13XX
337 default y 337 default y
338 select CPU_32v5 338 select CPU_32v5
339 select CPU_ABRT_EV5T 339 select CPU_ABRT_EV5T
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 510816c16da3..5cbf8b9d5141 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -195,11 +195,11 @@ config I2C_IBM_IIC
195 will be called i2c-ibm_iic. 195 will be called i2c-ibm_iic.
196 196
197config I2C_IOP3XX 197config I2C_IOP3XX
198 tristate "Intel IOP3xx and IXP4xx on-chip I2C interface" 198 tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
199 depends on (ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX) && I2C 199 depends on (ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX) && I2C
200 help 200 help
201 Say Y here if you want to use the IIC bus controller on 201 Say Y here if you want to use the IIC bus controller on
202 the Intel IOP3xx I/O Processors or IXP4xx Network Processors. 202 the Intel IOPx3xx I/O Processors or IXP4xx Network Processors.
203 203
204 This driver can also be built as a module. If so, the module 204 This driver can also be built as a module. If so, the module
205 will be called i2c-iop3xx. 205 will be called i2c-iop3xx.
diff --git a/include/asm-arm/arch-iop13xx/debug-macro.S b/include/asm-arm/arch-iop13xx/debug-macro.S
new file mode 100644
index 000000000000..788b4e386c16
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/debug-macro.S
@@ -0,0 +1,26 @@
1/*
2 * include/asm-arm/arch-iop13xx/debug-macro.S
3 *
4 * Debugging macro include header
5 *
6 * Copyright (C) 1994-1999 Russell King
7 * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14 .macro addruart, rx
15 mrc p15, 0, \rx, c1, c0
16 tst \rx, #1 @ mmu enabled?
17 moveq \rx, #0xff000000 @ physical
18 orreq \rx, \rx, #0x00d80000
19 movne \rx, #0xfe000000 @ virtual
20 orrne \rx, \rx, #0x00e80000
21 orr \rx, \rx, #0x00002300
22 orr \rx, \rx, #0x00000040
23 .endm
24
25#define UART_SHIFT 2
26#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop13xx/dma.h b/include/asm-arm/arch-iop13xx/dma.h
new file mode 100644
index 000000000000..2e15da53ff79
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/dma.h
@@ -0,0 +1,3 @@
1#ifndef _IOP13XX_DMA_H
2#define _IOP13XX_DMA_H_
3#endif
diff --git a/include/asm-arm/arch-iop13xx/entry-macro.S b/include/asm-arm/arch-iop13xx/entry-macro.S
new file mode 100644
index 000000000000..94c50283dc56
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/entry-macro.S
@@ -0,0 +1,39 @@
1/*
2 * iop13xx low level irq macros
3 * Copyright (c) 2005-2006, Intel Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
16 * Place - Suite 330, Boston, MA 02111-1307 USA.
17 *
18 */
19 .macro disable_fiq
20 .endm
21
22 /*
23 * Note: a 1-cycle window exists where iintvec will return the value
24 * of iintbase, so we explicitly check for "bad zeros"
25 */
26 .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
27 mrc p15, 0, \tmp, c15, c1, 0
28 orr \tmp, \tmp, #(1 << 6)
29 mcr p15, 0, \tmp, c15, c1, 0 @ Enable cp6 access
30
31 mrc p6, 0, \irqnr, c3, c2, 0 @ Read IINTVEC
32 cmp \irqnr, #0
33 mrceq p6, 0, \irqnr, c3, c2, 0 @ Re-read on potentially bad zero
34 adds \irqstat, \irqnr, #1 @ Check for 0xffffffff
35 movne \irqnr, \irqnr, lsr #2 @ Convert to irqnr
36
37 biceq \tmp, \tmp, #(1 << 6)
38 mcreq p15, 0, \tmp, c15, c1, 0 @ Disable cp6 access if no more interrupts
39 .endm
diff --git a/include/asm-arm/arch-iop13xx/hardware.h b/include/asm-arm/arch-iop13xx/hardware.h
new file mode 100644
index 000000000000..8e1d56289846
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/hardware.h
@@ -0,0 +1,28 @@
1#ifndef __ASM_ARCH_HARDWARE_H
2#define __ASM_ARCH_HARDWARE_H
3#include <asm/types.h>
4
5#define pcibios_assign_all_busses() 1
6
7#ifndef __ASSEMBLY__
8extern unsigned long iop13xx_pcibios_min_io;
9extern unsigned long iop13xx_pcibios_min_mem;
10extern u16 iop13xx_dev_id(void);
11extern void iop13xx_set_atu_mmr_bases(void);
12#endif
13
14#define PCIBIOS_MIN_IO (iop13xx_pcibios_min_io)
15#define PCIBIOS_MIN_MEM (iop13xx_pcibios_min_mem)
16
17/*
18 * Generic chipset bits
19 *
20 */
21#include "iop13xx.h"
22
23/*
24 * Board specific bits
25 */
26#include "iq81340.h"
27
28#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-iop13xx/io.h b/include/asm-arm/arch-iop13xx/io.h
new file mode 100644
index 000000000000..db6de2480a24
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/io.h
@@ -0,0 +1,41 @@
1/*
2 * iop13xx custom ioremap implementation
3 * Copyright (c) 2005-2006, Intel Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
16 * Place - Suite 330, Boston, MA 02111-1307 USA.
17 *
18 */
19#ifndef __ASM_ARM_ARCH_IO_H
20#define __ASM_ARM_ARCH_IO_H
21
22#define IO_SPACE_LIMIT 0xffffffff
23
24#define __io(a) (a)
25#define __mem_pci(a) (a)
26#define __mem_isa(a) (a)
27
28extern void __iomem * __ioremap(unsigned long, size_t, unsigned long);
29extern void __iomem *__iop13xx_ioremap(unsigned long cookie, size_t size,
30 unsigned long flags);
31extern void __iop13xx_iounmap(void __iomem *addr);
32
33extern u32 iop13xx_atue_mem_base;
34extern u32 iop13xx_atux_mem_base;
35extern size_t iop13xx_atue_mem_size;
36extern size_t iop13xx_atux_mem_size;
37
38#define __arch_ioremap(a, s, f) __iop13xx_ioremap(a, s, f)
39#define __arch_iounmap(a) __iop13xx_iounmap(a)
40
41#endif
diff --git a/include/asm-arm/arch-iop13xx/iop13xx.h b/include/asm-arm/arch-iop13xx/iop13xx.h
new file mode 100644
index 000000000000..a88522a0ff8e
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/iop13xx.h
@@ -0,0 +1,492 @@
1#ifndef _IOP13XX_HW_H_
2#define _IOP13XX_HW_H_
3
4#ifndef __ASSEMBLY__
5/* The ATU offsets can change based on the strapping */
6extern u32 iop13xx_atux_pmmr_offset;
7extern u32 iop13xx_atue_pmmr_offset;
8void iop13xx_init_irq(void);
9void iop13xx_map_io(void);
10void iop13xx_platform_init(void);
11void iop13xx_init_irq(void);
12void iop13xx_init_time(unsigned long tickrate);
13unsigned long iop13xx_gettimeoffset(void);
14
15/* handle cp6 access
16 * to do: handle access in entry-armv5.S and unify with
17 * the iop3xx implementation
18 * note: use iop13xx_cp6_enable_irq_save and iop13xx_cp6_irq_restore (irq.h)
19 * when interrupts are enabled
20 */
21static inline unsigned long iop13xx_cp6_save(void)
22{
23 u32 temp, cp_flags;
24
25 asm volatile (
26 "mrc p15, 0, %1, c15, c1, 0\n\t"
27 "orr %0, %1, #(1 << 6)\n\t"
28 "mcr p15, 0, %0, c15, c1, 0\n\t"
29 : "=r" (temp), "=r"(cp_flags));
30
31 return cp_flags;
32}
33
34static inline void iop13xx_cp6_restore(unsigned long cp_flags)
35{
36 asm volatile (
37 "mcr p15, 0, %0, c15, c1, 0\n\t"
38 : : "r" (cp_flags) );
39}
40
41/* CPUID CP6 R0 Page 0 */
42static inline int iop13xx_cpu_id(void)
43{
44 int id;
45 asm volatile("mrc p6, 0, %0, c0, c0, 0":"=r" (id));
46 return id;
47}
48
49#endif
50
51/*
52 * IOP13XX I/O and Mem space regions for PCI autoconfiguration
53 */
54#define IOP13XX_MAX_RAM_SIZE 0x80000000UL /* 2GB */
55#define IOP13XX_PCI_OFFSET IOP13XX_MAX_RAM_SIZE
56
57/* PCI MAP
58 * 0x0000.0000 - 0x8000.0000 1:1 mapping with Physical RAM
59 * 0x8000.0000 - 0x8800.0000 PCIX/PCIE memory window (128MB)
60*/
61#define IOP13XX_PCIX_IO_WINDOW_SIZE 0x10000UL
62#define IOP13XX_PCIX_LOWER_IO_PA 0xfffb0000UL
63#define IOP13XX_PCIX_LOWER_IO_VA 0xfec60000UL
64#define IOP13XX_PCIX_LOWER_IO_BA 0x0fff0000UL
65#define IOP13XX_PCIX_UPPER_IO_PA (IOP13XX_PCIX_LOWER_IO_PA +\
66 IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
67#define IOP13XX_PCIX_UPPER_IO_VA (IOP13XX_PCIX_LOWER_IO_VA +\
68 IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
69#define IOP13XX_PCIX_IO_OFFSET (IOP13XX_PCIX_LOWER_IO_VA -\
70 IOP13XX_PCIX_LOWER_IO_BA)
71#define IOP13XX_PCIX_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
72 (IOP13XX_PCIX_LOWER_IO_PA\
73 - IOP13XX_PCIX_LOWER_IO_VA))
74
75#define IOP13XX_PCIX_MEM_PHYS_OFFSET 0x100000000ULL
76#define IOP13XX_PCIX_MEM_WINDOW_SIZE 0x3a000000UL
77#define IOP13XX_PCIX_LOWER_MEM_BA (PHYS_OFFSET + IOP13XX_PCI_OFFSET)
78#define IOP13XX_PCIX_LOWER_MEM_PA (IOP13XX_PCIX_MEM_PHYS_OFFSET +\
79 IOP13XX_PCIX_LOWER_MEM_BA)
80#define IOP13XX_PCIX_UPPER_MEM_PA (IOP13XX_PCIX_LOWER_MEM_PA +\
81 IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
82#define IOP13XX_PCIX_UPPER_MEM_BA (IOP13XX_PCIX_LOWER_MEM_BA +\
83 IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
84
85#define IOP13XX_PCIX_MEM_COOKIE 0x80000000UL
86#define IOP13XX_PCIX_LOWER_MEM_RA IOP13XX_PCIX_MEM_COOKIE
87#define IOP13XX_PCIX_UPPER_MEM_RA (IOP13XX_PCIX_LOWER_MEM_RA +\
88 IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
89#define IOP13XX_PCIX_MEM_OFFSET (IOP13XX_PCIX_MEM_COOKIE -\
90 IOP13XX_PCIX_LOWER_MEM_BA)
91
92/* PCI-E ranges */
93#define IOP13XX_PCIE_IO_WINDOW_SIZE 0x10000UL
94#define IOP13XX_PCIE_LOWER_IO_PA 0xfffd0000UL
95#define IOP13XX_PCIE_LOWER_IO_VA 0xfed70000UL
96#define IOP13XX_PCIE_LOWER_IO_BA 0x0fff0000UL
97#define IOP13XX_PCIE_UPPER_IO_PA (IOP13XX_PCIE_LOWER_IO_PA +\
98 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
99#define IOP13XX_PCIE_UPPER_IO_VA (IOP13XX_PCIE_LOWER_IO_VA +\
100 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
101#define IOP13XX_PCIE_UPPER_IO_BA (IOP13XX_PCIE_LOWER_IO_BA +\
102 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
103#define IOP13XX_PCIE_IO_OFFSET (IOP13XX_PCIE_LOWER_IO_VA -\
104 IOP13XX_PCIE_LOWER_IO_BA)
105#define IOP13XX_PCIE_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
106 (IOP13XX_PCIE_LOWER_IO_PA\
107 - IOP13XX_PCIE_LOWER_IO_VA))
108
109#define IOP13XX_PCIE_MEM_PHYS_OFFSET 0x200000000ULL
110#define IOP13XX_PCIE_MEM_WINDOW_SIZE 0x3a000000UL
111#define IOP13XX_PCIE_LOWER_MEM_BA (PHYS_OFFSET + IOP13XX_PCI_OFFSET)
112#define IOP13XX_PCIE_LOWER_MEM_PA (IOP13XX_PCIE_MEM_PHYS_OFFSET +\
113 IOP13XX_PCIE_LOWER_MEM_BA)
114#define IOP13XX_PCIE_UPPER_MEM_PA (IOP13XX_PCIE_LOWER_MEM_PA +\
115 IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
116#define IOP13XX_PCIE_UPPER_MEM_BA (IOP13XX_PCIE_LOWER_MEM_BA +\
117 IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
118
119/* All 0xc000.0000 - 0xfdff.ffff addresses belong to PCIe */
120#define IOP13XX_PCIE_MEM_COOKIE 0xc0000000UL
121#define IOP13XX_PCIE_LOWER_MEM_RA IOP13XX_PCIE_MEM_COOKIE
122#define IOP13XX_PCIE_UPPER_MEM_RA (IOP13XX_PCIE_LOWER_MEM_RA +\
123 IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
124#define IOP13XX_PCIE_MEM_OFFSET (IOP13XX_PCIE_MEM_COOKIE -\
125 IOP13XX_PCIE_LOWER_MEM_BA)
126
127/* PBI Ranges */
128#define IOP13XX_PBI_LOWER_MEM_PA 0xf0000000UL
129#define IOP13XX_PBI_MEM_WINDOW_SIZE 0x04000000UL
130#define IOP13XX_PBI_MEM_COOKIE 0xfa000000UL
131#define IOP13XX_PBI_LOWER_MEM_RA IOP13XX_PBI_MEM_COOKIE
132#define IOP13XX_PBI_UPPER_MEM_RA (IOP13XX_PBI_LOWER_MEM_RA +\
133 IOP13XX_PBI_MEM_WINDOW_SIZE - 1)
134
135/*
136 * IOP13XX chipset registers
137 */
138#define IOP13XX_PMMR_PHYS_MEM_BASE 0xffd80000UL /* PMMR phys. address */
139#define IOP13XX_PMMR_VIRT_MEM_BASE 0xfee80000UL /* PMMR phys. address */
140#define IOP13XX_PMMR_MEM_WINDOW_SIZE 0x80000
141#define IOP13XX_PMMR_UPPER_MEM_VA (IOP13XX_PMMR_VIRT_MEM_BASE +\
142 IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
143#define IOP13XX_PMMR_UPPER_MEM_PA (IOP13XX_PMMR_PHYS_MEM_BASE +\
144 IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
145#define IOP13XX_PMMR_VIRT_TO_PHYS(addr) (u32) ((u32) addr +\
146 (IOP13XX_PMMR_PHYS_MEM_BASE\
147 - IOP13XX_PMMR_VIRT_MEM_BASE))
148#define IOP13XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
149 (IOP13XX_PMMR_PHYS_MEM_BASE\
150 - IOP13XX_PMMR_VIRT_MEM_BASE))
151#define IOP13XX_REG_ADDR32(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
152#define IOP13XX_REG_ADDR16(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
153#define IOP13XX_REG_ADDR8(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
154#define IOP13XX_REG_ADDR32_PHYS(reg) (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
155#define IOP13XX_REG_ADDR16_PHYS(reg) (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
156#define IOP13XX_REG_ADDR8_PHYS(reg) (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
157#define IOP13XX_PMMR_SIZE 0x00080000
158
159/*=================== Defines for Platform Devices =====================*/
160#define IOP13XX_UART0_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002300)
161#define IOP13XX_UART1_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002340)
162#define IOP13XX_UART0_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002300)
163#define IOP13XX_UART1_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002340)
164
165#define IOP13XX_I2C0_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002500)
166#define IOP13XX_I2C1_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002520)
167#define IOP13XX_I2C2_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002540)
168#define IOP13XX_I2C0_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002500)
169#define IOP13XX_I2C1_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002520)
170#define IOP13XX_I2C2_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002540)
171
172/* ATU selection flags */
173/* IOP13XX_INIT_ATU_DEFAULT = Rely on CONFIG_IOP13XX_ATU* */
174#define IOP13XX_INIT_ATU_DEFAULT (0)
175#define IOP13XX_INIT_ATU_ATUX (1 << 0)
176#define IOP13XX_INIT_ATU_ATUE (1 << 1)
177#define IOP13XX_INIT_ATU_NONE (1 << 2)
178
179/* UART selection flags */
180/* IOP13XX_INIT_UART_DEFAULT = Rely on CONFIG_IOP13XX_UART* */
181#define IOP13XX_INIT_UART_DEFAULT (0)
182#define IOP13XX_INIT_UART_0 (1 << 0)
183#define IOP13XX_INIT_UART_1 (1 << 1)
184
185/* I2C selection flags */
186/* IOP13XX_INIT_I2C_DEFAULT = Rely on CONFIG_IOP13XX_I2C* */
187#define IOP13XX_INIT_I2C_DEFAULT (0)
188#define IOP13XX_INIT_I2C_0 (1 << 0)
189#define IOP13XX_INIT_I2C_1 (1 << 1)
190#define IOP13XX_INIT_I2C_2 (1 << 2)
191
192#define IQ81340_NUM_UART 2
193#define IQ81340_NUM_I2C 3
194#define IQ81340_NUM_PHYS_MAP_FLASH 1
195#define IQ81340_MAX_PLAT_DEVICES (IQ81340_NUM_UART +\
196 IQ81340_NUM_I2C +\
197 IQ81340_NUM_PHYS_MAP_FLASH)
198
199/*========================== PMMR offsets for key registers ============*/
200#define IOP13XX_ATU0_PMMR_OFFSET 0x00048000
201#define IOP13XX_ATU1_PMMR_OFFSET 0x0004c000
202#define IOP13XX_ATU2_PMMR_OFFSET 0x0004d000
203#define IOP13XX_ADMA0_PMMR_OFFSET 0x00000000
204#define IOP13XX_ADMA1_PMMR_OFFSET 0x00000200
205#define IOP13XX_ADMA2_PMMR_OFFSET 0x00000400
206#define IOP13XX_PBI_PMMR_OFFSET 0x00001580
207#define IOP13XX_ESSR0_PMMR_OFFSET 0x00002188
208#define IOP13XX_ESSR0 IOP13XX_REG_ADDR32(0x00002188)
209
210#define IOP13XX_ESSR0_IFACE_MASK 0x00004000 /* Interface PCI-X / PCI-E */
211#define IOP13XX_CONTROLLER_ONLY (1 << 14)
212#define IOP13XX_INTERFACE_SEL_PCIX (1 << 15)
213
214#define IOP13XX_PMON_PMMR_OFFSET 0x0001A000
215#define IOP13XX_PMON_BASE (IOP13XX_PMMR_VIRT_MEM_BASE +\
216 IOP13XX_PMON_PMMR_OFFSET)
217#define IOP13XX_PMON_PHYSBASE (IOP13XX_PMMR_PHYS_MEM_BASE +\
218 IOP13XX_PMON_PMMR_OFFSET)
219
220#define IOP13XX_PMON_CMD0 (IOP13XX_PMON_BASE + 0x0)
221#define IOP13XX_PMON_EVR0 (IOP13XX_PMON_BASE + 0x4)
222#define IOP13XX_PMON_STS0 (IOP13XX_PMON_BASE + 0x8)
223#define IOP13XX_PMON_DATA0 (IOP13XX_PMON_BASE + 0xC)
224
225#define IOP13XX_PMON_CMD3 (IOP13XX_PMON_BASE + 0x30)
226#define IOP13XX_PMON_EVR3 (IOP13XX_PMON_BASE + 0x34)
227#define IOP13XX_PMON_STS3 (IOP13XX_PMON_BASE + 0x38)
228#define IOP13XX_PMON_DATA3 (IOP13XX_PMON_BASE + 0x3C)
229
230#define IOP13XX_PMON_CMD7 (IOP13XX_PMON_BASE + 0x70)
231#define IOP13XX_PMON_EVR7 (IOP13XX_PMON_BASE + 0x74)
232#define IOP13XX_PMON_STS7 (IOP13XX_PMON_BASE + 0x78)
233#define IOP13XX_PMON_DATA7 (IOP13XX_PMON_BASE + 0x7C)
234
235#define IOP13XX_PMONEN (IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E040)
236#define IOP13XX_PMONSTAT (IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E044)
237
238/*================================ATU===================================*/
239#define IOP13XX_ATUX_OFFSET(ofs) IOP13XX_REG_ADDR32(\
240 iop13xx_atux_pmmr_offset + (ofs))
241
242#define IOP13XX_ATUX_DID IOP13XX_REG_ADDR16(\
243 iop13xx_atux_pmmr_offset + 0x2)
244
245#define IOP13XX_ATUX_ATUCMD IOP13XX_REG_ADDR16(\
246 iop13xx_atux_pmmr_offset + 0x4)
247#define IOP13XX_ATUX_ATUSR IOP13XX_REG_ADDR16(\
248 iop13xx_atux_pmmr_offset + 0x6)
249
250#define IOP13XX_ATUX_IABAR0 IOP13XX_ATUX_OFFSET(0x10)
251#define IOP13XX_ATUX_IAUBAR0 IOP13XX_ATUX_OFFSET(0x14)
252#define IOP13XX_ATUX_IABAR1 IOP13XX_ATUX_OFFSET(0x18)
253#define IOP13XX_ATUX_IAUBAR1 IOP13XX_ATUX_OFFSET(0x1c)
254#define IOP13XX_ATUX_IABAR2 IOP13XX_ATUX_OFFSET(0x20)
255#define IOP13XX_ATUX_IAUBAR2 IOP13XX_ATUX_OFFSET(0x24)
256#define IOP13XX_ATUX_IALR0 IOP13XX_ATUX_OFFSET(0x40)
257#define IOP13XX_ATUX_IATVR0 IOP13XX_ATUX_OFFSET(0x44)
258#define IOP13XX_ATUX_IAUTVR0 IOP13XX_ATUX_OFFSET(0x48)
259#define IOP13XX_ATUX_IALR1 IOP13XX_ATUX_OFFSET(0x4c)
260#define IOP13XX_ATUX_IATVR1 IOP13XX_ATUX_OFFSET(0x50)
261#define IOP13XX_ATUX_IAUTVR1 IOP13XX_ATUX_OFFSET(0x54)
262#define IOP13XX_ATUX_IALR2 IOP13XX_ATUX_OFFSET(0x58)
263#define IOP13XX_ATUX_IATVR2 IOP13XX_ATUX_OFFSET(0x5c)
264#define IOP13XX_ATUX_IAUTVR2 IOP13XX_ATUX_OFFSET(0x60)
265#define IOP13XX_ATUX_ATUCR IOP13XX_ATUX_OFFSET(0x70)
266#define IOP13XX_ATUX_PCSR IOP13XX_ATUX_OFFSET(0x74)
267#define IOP13XX_ATUX_ATUISR IOP13XX_ATUX_OFFSET(0x78)
268#define IOP13XX_ATUX_PCIXSR IOP13XX_ATUX_OFFSET(0xD4)
269#define IOP13XX_ATUX_IABAR3 IOP13XX_ATUX_OFFSET(0x200)
270#define IOP13XX_ATUX_IAUBAR3 IOP13XX_ATUX_OFFSET(0x204)
271#define IOP13XX_ATUX_IALR3 IOP13XX_ATUX_OFFSET(0x208)
272#define IOP13XX_ATUX_IATVR3 IOP13XX_ATUX_OFFSET(0x20c)
273#define IOP13XX_ATUX_IAUTVR3 IOP13XX_ATUX_OFFSET(0x210)
274
275#define IOP13XX_ATUX_OIOBAR IOP13XX_ATUX_OFFSET(0x300)
276#define IOP13XX_ATUX_OIOWTVR IOP13XX_ATUX_OFFSET(0x304)
277#define IOP13XX_ATUX_OUMBAR0 IOP13XX_ATUX_OFFSET(0x308)
278#define IOP13XX_ATUX_OUMWTVR0 IOP13XX_ATUX_OFFSET(0x30c)
279#define IOP13XX_ATUX_OUMBAR1 IOP13XX_ATUX_OFFSET(0x310)
280#define IOP13XX_ATUX_OUMWTVR1 IOP13XX_ATUX_OFFSET(0x314)
281#define IOP13XX_ATUX_OUMBAR2 IOP13XX_ATUX_OFFSET(0x318)
282#define IOP13XX_ATUX_OUMWTVR2 IOP13XX_ATUX_OFFSET(0x31c)
283#define IOP13XX_ATUX_OUMBAR3 IOP13XX_ATUX_OFFSET(0x320)
284#define IOP13XX_ATUX_OUMWTVR3 IOP13XX_ATUX_OFFSET(0x324)
285#define IOP13XX_ATUX_OUDMABAR IOP13XX_ATUX_OFFSET(0x328)
286#define IOP13XX_ATUX_OUMSIBAR IOP13XX_ATUX_OFFSET(0x32c)
287#define IOP13XX_ATUX_OCCAR IOP13XX_ATUX_OFFSET(0x330)
288#define IOP13XX_ATUX_OCCDR IOP13XX_ATUX_OFFSET(0x334)
289
290#define IOP13XX_ATUX_ATUCR_OUT_EN (1 << 1)
291#define IOP13XX_ATUX_PCSR_CENTRAL_RES (1 << 25)
292#define IOP13XX_ATUX_PCSR_P_RSTOUT (1 << 21)
293#define IOP13XX_ATUX_PCSR_OUT_Q_BUSY (1 << 15)
294#define IOP13XX_ATUX_PCSR_IN_Q_BUSY (1 << 14)
295#define IOP13XX_ATUX_PCSR_FREQ_OFFSET (16)
296
297#define IOP13XX_ATUX_STAT_PCI_IFACE_ERR (1 << 18)
298#define IOP13XX_ATUX_STAT_VPD_ADDR (1 << 17)
299#define IOP13XX_ATUX_STAT_INT_PAR_ERR (1 << 16)
300#define IOP13XX_ATUX_STAT_CFG_WRITE (1 << 15)
301#define IOP13XX_ATUX_STAT_ERR_COR (1 << 14)
302#define IOP13XX_ATUX_STAT_TX_SCEM (1 << 13)
303#define IOP13XX_ATUX_STAT_REC_SCEM (1 << 12)
304#define IOP13XX_ATUX_STAT_POWER_TRAN (1 << 11)
305#define IOP13XX_ATUX_STAT_TX_SERR (1 << 10)
306#define IOP13XX_ATUX_STAT_DET_PAR_ERR (1 << 9 )
307#define IOP13XX_ATUX_STAT_BIST (1 << 8 )
308#define IOP13XX_ATUX_STAT_INT_REC_MABORT (1 << 7 )
309#define IOP13XX_ATUX_STAT_REC_SERR (1 << 4 )
310#define IOP13XX_ATUX_STAT_EXT_REC_MABORT (1 << 3 )
311#define IOP13XX_ATUX_STAT_EXT_REC_TABORT (1 << 2 )
312#define IOP13XX_ATUX_STAT_EXT_SIG_TABORT (1 << 1 )
313#define IOP13XX_ATUX_STAT_MASTER_DATA_PAR (1 << 0 )
314
315#define IOP13XX_ATUX_PCIXSR_BUS_NUM (8)
316#define IOP13XX_ATUX_PCIXSR_DEV_NUM (3)
317#define IOP13XX_ATUX_PCIXSR_FUNC_NUM (0)
318
319#define IOP13XX_ATUX_IALR_DISABLE 0x00000001
320#define IOP13XX_ATUX_OUMBAR_ENABLE 0x80000000
321
322#define IOP13XX_ATUE_OFFSET(ofs) IOP13XX_REG_ADDR32(\
323 iop13xx_atue_pmmr_offset + (ofs))
324
325#define IOP13XX_ATUE_DID IOP13XX_REG_ADDR16(\
326 iop13xx_atue_pmmr_offset + 0x2)
327#define IOP13XX_ATUE_ATUCMD IOP13XX_REG_ADDR16(\
328 iop13xx_atue_pmmr_offset + 0x4)
329#define IOP13XX_ATUE_ATUSR IOP13XX_REG_ADDR16(\
330 iop13xx_atue_pmmr_offset + 0x6)
331
332#define IOP13XX_ATUE_IABAR0 IOP13XX_ATUE_OFFSET(0x10)
333#define IOP13XX_ATUE_IAUBAR0 IOP13XX_ATUE_OFFSET(0x14)
334#define IOP13XX_ATUE_IABAR1 IOP13XX_ATUE_OFFSET(0x18)
335#define IOP13XX_ATUE_IAUBAR1 IOP13XX_ATUE_OFFSET(0x1c)
336#define IOP13XX_ATUE_IABAR2 IOP13XX_ATUE_OFFSET(0x20)
337#define IOP13XX_ATUE_IAUBAR2 IOP13XX_ATUE_OFFSET(0x24)
338#define IOP13XX_ATUE_IALR0 IOP13XX_ATUE_OFFSET(0x40)
339#define IOP13XX_ATUE_IATVR0 IOP13XX_ATUE_OFFSET(0x44)
340#define IOP13XX_ATUE_IAUTVR0 IOP13XX_ATUE_OFFSET(0x48)
341#define IOP13XX_ATUE_IALR1 IOP13XX_ATUE_OFFSET(0x4c)
342#define IOP13XX_ATUE_IATVR1 IOP13XX_ATUE_OFFSET(0x50)
343#define IOP13XX_ATUE_IAUTVR1 IOP13XX_ATUE_OFFSET(0x54)
344#define IOP13XX_ATUE_IALR2 IOP13XX_ATUE_OFFSET(0x58)
345#define IOP13XX_ATUE_IATVR2 IOP13XX_ATUE_OFFSET(0x5c)
346#define IOP13XX_ATUE_IAUTVR2 IOP13XX_ATUE_OFFSET(0x60)
347#define IOP13XX_ATUE_PE_LSTS IOP13XX_REG_ADDR16(\
348 iop13xx_atue_pmmr_offset + 0xe2)
349#define IOP13XX_ATUE_OIOWTVR IOP13XX_ATUE_OFFSET(0x304)
350#define IOP13XX_ATUE_OUMBAR0 IOP13XX_ATUE_OFFSET(0x308)
351#define IOP13XX_ATUE_OUMWTVR0 IOP13XX_ATUE_OFFSET(0x30c)
352#define IOP13XX_ATUE_OUMBAR1 IOP13XX_ATUE_OFFSET(0x310)
353#define IOP13XX_ATUE_OUMWTVR1 IOP13XX_ATUE_OFFSET(0x314)
354#define IOP13XX_ATUE_OUMBAR2 IOP13XX_ATUE_OFFSET(0x318)
355#define IOP13XX_ATUE_OUMWTVR2 IOP13XX_ATUE_OFFSET(0x31c)
356#define IOP13XX_ATUE_OUMBAR3 IOP13XX_ATUE_OFFSET(0x320)
357#define IOP13XX_ATUE_OUMWTVR3 IOP13XX_ATUE_OFFSET(0x324)
358
359#define IOP13XX_ATUE_ATUCR IOP13XX_ATUE_OFFSET(0x70)
360#define IOP13XX_ATUE_PCSR IOP13XX_ATUE_OFFSET(0x74)
361#define IOP13XX_ATUE_ATUISR IOP13XX_ATUE_OFFSET(0x78)
362#define IOP13XX_ATUE_OIOBAR IOP13XX_ATUE_OFFSET(0x300)
363#define IOP13XX_ATUE_OCCAR IOP13XX_ATUE_OFFSET(0x32c)
364#define IOP13XX_ATUE_OCCDR IOP13XX_ATUE_OFFSET(0x330)
365
366#define IOP13XX_ATUE_PIE_STS IOP13XX_ATUE_OFFSET(0x384)
367#define IOP13XX_ATUE_PIE_MSK IOP13XX_ATUE_OFFSET(0x388)
368
369#define IOP13XX_ATUE_ATUCR_IVM (1 << 6)
370#define IOP13XX_ATUE_ATUCR_OUT_EN (1 << 1)
371#define IOP13XX_ATUE_OCCAR_BUS_NUM (24)
372#define IOP13XX_ATUE_OCCAR_DEV_NUM (19)
373#define IOP13XX_ATUE_OCCAR_FUNC_NUM (16)
374#define IOP13XX_ATUE_OCCAR_EXT_REG (8)
375#define IOP13XX_ATUE_OCCAR_REG (2)
376
377#define IOP13XX_ATUE_PCSR_BUS_NUM (24)
378#define IOP13XX_ATUE_PCSR_DEV_NUM (19)
379#define IOP13XX_ATUE_PCSR_FUNC_NUM (16)
380#define IOP13XX_ATUE_PCSR_OUT_Q_BUSY (1 << 15)
381#define IOP13XX_ATUE_PCSR_IN_Q_BUSY (1 << 14)
382#define IOP13XX_ATUE_PCSR_END_POINT (1 << 13)
383#define IOP13XX_ATUE_PCSR_LLRB_BUSY (1 << 12)
384
385#define IOP13XX_ATUE_PCSR_BUS_NUM_MASK (0xff)
386#define IOP13XX_ATUE_PCSR_DEV_NUM_MASK (0x1f)
387#define IOP13XX_ATUE_PCSR_FUNC_NUM_MASK (0x7)
388
389#define IOP13XX_ATUE_PCSR_CORE_RESET (8)
390#define IOP13XX_ATUE_PCSR_FUNC_NUM (16)
391
392#define IOP13XX_ATUE_LSTS_TRAINING (1 << 11)
393#define IOP13XX_ATUE_STAT_SLOT_PWR_MSG (1 << 28)
394#define IOP13XX_ATUE_STAT_PME (1 << 27)
395#define IOP13XX_ATUE_STAT_HOT_PLUG_MSG (1 << 26)
396#define IOP13XX_ATUE_STAT_IVM (1 << 25)
397#define IOP13XX_ATUE_STAT_BIST (1 << 24)
398#define IOP13XX_ATUE_STAT_CFG_WRITE (1 << 18)
399#define IOP13XX_ATUE_STAT_VPD_ADDR (1 << 17)
400#define IOP13XX_ATUE_STAT_POWER_TRAN (1 << 16)
401#define IOP13XX_ATUE_STAT_HALT_ON_ERROR (1 << 13)
402#define IOP13XX_ATUE_STAT_ROOT_SYS_ERR (1 << 12)
403#define IOP13XX_ATUE_STAT_ROOT_ERR_MSG (1 << 11)
404#define IOP13XX_ATUE_STAT_PCI_IFACE_ERR (1 << 10)
405#define IOP13XX_ATUE_STAT_ERR_COR (1 << 9 )
406#define IOP13XX_ATUE_STAT_ERR_UNCOR (1 << 8 )
407#define IOP13XX_ATUE_STAT_CRS (1 << 7 )
408#define IOP13XX_ATUE_STAT_LNK_DWN (1 << 6 )
409#define IOP13XX_ATUE_STAT_INT_REC_MABORT (1 << 5 )
410#define IOP13XX_ATUE_STAT_DET_PAR_ERR (1 << 4 )
411#define IOP13XX_ATUE_STAT_EXT_REC_MABORT (1 << 3 )
412#define IOP13XX_ATUE_STAT_SIG_TABORT (1 << 2 )
413#define IOP13XX_ATUE_STAT_EXT_REC_TABORT (1 << 1 )
414#define IOP13XX_ATUE_STAT_MASTER_DATA_PAR (1 << 0 )
415
416#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_COMP_REQ (1 << 31)
417#define IOP13XX_ATUE_ESTAT_REC_COMPLETER_ABORT (1 << 30)
418#define IOP13XX_ATUE_ESTAT_TX_POISONED_TLP (1 << 29)
419#define IOP13XX_ATUE_ESTAT_TX_PAR_ERR (1 << 28)
420#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_REQ (1 << 20)
421#define IOP13XX_ATUE_ESTAT_REC_ECRC_ERR (1 << 19)
422#define IOP13XX_ATUE_ESTAT_REC_MALFORMED_TLP (1 << 18)
423#define IOP13XX_ATUE_ESTAT_TX_RECEIVER_OVERFLOW (1 << 17)
424#define IOP13XX_ATUE_ESTAT_REC_UNEXPECTED_COMP (1 << 16)
425#define IOP13XX_ATUE_ESTAT_INT_COMP_ABORT (1 << 15)
426#define IOP13XX_ATUE_ESTAT_COMP_TIMEOUT (1 << 14)
427#define IOP13XX_ATUE_ESTAT_FLOW_CONTROL_ERR (1 << 13)
428#define IOP13XX_ATUE_ESTAT_REC_POISONED_TLP (1 << 12)
429#define IOP13XX_ATUE_ESTAT_DATA_LNK_ERR (1 << 4 )
430#define IOP13XX_ATUE_ESTAT_TRAINING_ERR (1 << 0 )
431
432#define IOP13XX_ATUE_IALR_DISABLE (0x00000001)
433#define IOP13XX_ATUE_OUMBAR_ENABLE (0x80000000)
434#define IOP13XX_ATU_OUMBAR_FUNC_NUM (28)
435#define IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK (0x7)
436/*=======================================================================*/
437
438/*==============================ADMA UNITS===============================*/
439#define IOP13XX_ADMA_PHYS_BASE(chan) IOP13XX_REG_ADDR32_PHYS((chan << 9))
440#define IOP13XX_ADMA_UPPER_PA(chan) (IOP13XX_ADMA_PHYS_BASE(chan) + 0xc0)
441#define IOP13XX_ADMA_OFFSET(chan, ofs) IOP13XX_REG_ADDR32((chan << 9) + (ofs))
442
443#define IOP13XX_ADMA_ACCR(chan) IOP13XX_ADMA_OFFSET(chan, 0x0)
444#define IOP13XX_ADMA_ACSR(chan) IOP13XX_ADMA_OFFSET(chan, 0x4)
445#define IOP13XX_ADMA_ADAR(chan) IOP13XX_ADMA_OFFSET(chan, 0x8)
446#define IOP13XX_ADMA_IIPCR(chan) IOP13XX_ADMA_OFFSET(chan, 0x18)
447#define IOP13XX_ADMA_IIPAR(chan) IOP13XX_ADMA_OFFSET(chan, 0x1c)
448#define IOP13XX_ADMA_IIPUAR(chan) IOP13XX_ADMA_OFFSET(chan, 0x20)
449#define IOP13XX_ADMA_ANDAR(chan) IOP13XX_ADMA_OFFSET(chan, 0x24)
450#define IOP13XX_ADMA_ADCR(chan) IOP13XX_ADMA_OFFSET(chan, 0x28)
451#define IOP13XX_ADMA_CARMD(chan) IOP13XX_ADMA_OFFSET(chan, 0x2c)
452#define IOP13XX_ADMA_ABCR(chan) IOP13XX_ADMA_OFFSET(chan, 0x30)
453#define IOP13XX_ADMA_DLADR(chan) IOP13XX_ADMA_OFFSET(chan, 0x34)
454#define IOP13XX_ADMA_DUADR(chan) IOP13XX_ADMA_OFFSET(chan, 0x38)
455#define IOP13XX_ADMA_SLAR(src, chan) IOP13XX_ADMA_OFFSET(chan, 0x3c + (src <<3))
456#define IOP13XX_ADMA_SUAR(src, chan) IOP13XX_ADMA_OFFSET(chan, 0x40 + (src <<3))
457
458/*==============================XSI BRIDGE===============================*/
459#define IOP13XX_XBG_BECSR IOP13XX_REG_ADDR32(0x178c)
460#define IOP13XX_XBG_BERAR IOP13XX_REG_ADDR32(0x1790)
461#define IOP13XX_XBG_BERUAR IOP13XX_REG_ADDR32(0x1794)
462#define is_atue_occdr_error(x) ((__raw_readl(IOP13XX_XBG_BERAR) == \
463 IOP13XX_PMMR_VIRT_TO_PHYS(\
464 IOP13XX_ATUE_OCCDR))\
465 && (__raw_readl(IOP13XX_XBG_BECSR) & 1))
466#define is_atux_occdr_error(x) ((__raw_readl(IOP13XX_XBG_BERAR) == \
467 IOP13XX_PMMR_VIRT_TO_PHYS(\
468 IOP13XX_ATUX_OCCDR))\
469 && (__raw_readl(IOP13XX_XBG_BECSR) & 1))
470/*=======================================================================*/
471
472#define IOP13XX_PBI_OFFSET(ofs) IOP13XX_REG_ADDR32(IOP13XX_PBI_PMMR_OFFSET +\
473 (ofs))
474
475#define IOP13XX_PBI_CR IOP13XX_PBI_OFFSET(0x0)
476#define IOP13XX_PBI_SR IOP13XX_PBI_OFFSET(0x4)
477#define IOP13XX_PBI_BAR0 IOP13XX_PBI_OFFSET(0x8)
478#define IOP13XX_PBI_LR0 IOP13XX_PBI_OFFSET(0xc)
479#define IOP13XX_PBI_BAR1 IOP13XX_PBI_OFFSET(0x10)
480#define IOP13XX_PBI_LR1 IOP13XX_PBI_OFFSET(0x14)
481
482#define IOP13XX_TMR_TC 0x01
483#define IOP13XX_TMR_EN 0x02
484#define IOP13XX_TMR_RELOAD 0x04
485#define IOP13XX_TMR_PRIVILEGED 0x08
486
487#define IOP13XX_TMR_RATIO_1_1 0x00
488#define IOP13XX_TMR_RATIO_4_1 0x10
489#define IOP13XX_TMR_RATIO_8_1 0x20
490#define IOP13XX_TMR_RATIO_16_1 0x30
491
492#endif /* _IOP13XX_HW_H_ */
diff --git a/include/asm-arm/arch-iop13xx/iq81340.h b/include/asm-arm/arch-iop13xx/iq81340.h
new file mode 100644
index 000000000000..b98f8f109c22
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/iq81340.h
@@ -0,0 +1,31 @@
1#ifndef _IQ81340_H_
2#define _IQ81340_H_
3
4#define IQ81340_PCE_BAR0 IOP13XX_PBI_LOWER_MEM_RA
5#define IQ81340_PCE_BAR1 (IQ81340_PCE_BAR0 + 0x02000000)
6
7#define IQ81340_FLASHBASE IQ81340_PCE_BAR0 /* Flash */
8
9#define IQ81340_PCE_BAR1_OFFSET(a) (IQ81340_PCE_BAR1 + (a))
10
11#define IQ81340_PRD_CODE IQ81340_PCE_BAR1_OFFSET(0)
12#define IQ81340_BRD_STEP IQ81340_PCE_BAR1_OFFSET(0x10000)
13#define IQ81340_CPLD_REV IQ81340_PCE_BAR1_OFFSET(0x20000)
14#define IQ81340_LED IQ81340_PCE_BAR1_OFFSET(0x30000)
15#define IQ81340_LHEX IQ81340_PCE_BAR1_OFFSET(0x40000)
16#define IQ81340_RHEX IQ81340_PCE_BAR1_OFFSET(0x50000)
17#define IQ81340_BUZZER IQ81340_PCE_BAR1_OFFSET(0x60000)
18#define IQ81340_32K_NVRAM IQ81340_PCE_BAR1_OFFSET(0x70000)
19#define IQ81340_256K_NVRAM IQ81340_PCE_BAR1_OFFSET(0x80000)
20#define IQ81340_ROTARY_SW IQ81340_PCE_BAR1_OFFSET(0xd0000)
21#define IQ81340_BATT_STAT IQ81340_PCE_BAR1_OFFSET(0xf0000)
22#define IQ81340_CMP_FLSH IQ81340_PCE_BAR1_OFFSET(0x1000000) /* 16MB */
23
24#define PBI_CF_IDE_BASE (IQ81340_CMP_FLSH)
25#define PBI_CF_BAR_ADDR (IOP13XX_PBI_BAR1)
26
27/* These are the values used in the Machine description */
28#define PHYS_IO 0xfeffff00
29#define IO_PG_OFFSET 0xffffff00
30#define BOOT_PARAM_OFFSET 0x00000100
31#endif /* _IQ81340_H_ */
diff --git a/include/asm-arm/arch-iop13xx/irqs.h b/include/asm-arm/arch-iop13xx/irqs.h
new file mode 100644
index 000000000000..442e35a40359
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/irqs.h
@@ -0,0 +1,207 @@
1#ifndef _IOP13XX_IRQS_H_
2#define _IOP13XX_IRQS_H_
3
4#ifndef __ASSEMBLER__
5#include <linux/types.h>
6#include <asm/system.h> /* local_irq_save */
7#include <asm/arch/iop13xx.h> /* iop13xx_cp6_* */
8
9/* INTPND0 CP6 R0 Page 3
10 */
11static inline u32 read_intpnd_0(void)
12{
13 u32 val;
14 asm volatile("mrc p6, 0, %0, c0, c3, 0":"=r" (val));
15 return val;
16}
17
18/* INTPND1 CP6 R1 Page 3
19 */
20static inline u32 read_intpnd_1(void)
21{
22 u32 val;
23 asm volatile("mrc p6, 0, %0, c1, c3, 0":"=r" (val));
24 return val;
25}
26
27/* INTPND2 CP6 R2 Page 3
28 */
29static inline u32 read_intpnd_2(void)
30{
31 u32 val;
32 asm volatile("mrc p6, 0, %0, c2, c3, 0":"=r" (val));
33 return val;
34}
35
36/* INTPND3 CP6 R3 Page 3
37 */
38static inline u32 read_intpnd_3(void)
39{
40 u32 val;
41 asm volatile("mrc p6, 0, %0, c3, c3, 0":"=r" (val));
42 return val;
43}
44
45static inline void
46iop13xx_cp6_enable_irq_save(unsigned long *cp_flags, unsigned long *irq_flags)
47{
48 local_irq_save(*irq_flags);
49 *cp_flags = iop13xx_cp6_save();
50}
51
52static inline void
53iop13xx_cp6_irq_restore(unsigned long *cp_flags,
54 unsigned long *irq_flags)
55{
56 iop13xx_cp6_restore(*cp_flags);
57 local_irq_restore(*irq_flags);
58}
59#endif
60
61#define INTBASE 0
62#define INTSIZE_4 1
63
64/*
65 * iop34x chipset interrupts
66 */
67#define IOP13XX_IRQ(x) (IOP13XX_IRQ_OFS + (x))
68
69/*
70 * On IRQ or FIQ register
71 */
72#define IRQ_IOP13XX_ADMA0_EOT (0)
73#define IRQ_IOP13XX_ADMA0_EOC (1)
74#define IRQ_IOP13XX_ADMA1_EOT (2)
75#define IRQ_IOP13XX_ADMA1_EOC (3)
76#define IRQ_IOP13XX_ADMA2_EOT (4)
77#define IRQ_IOP13XX_ADMA2_EOC (5)
78#define IRQ_IOP134_WATCHDOG (6)
79#define IRQ_IOP13XX_RSVD_7 (7)
80#define IRQ_IOP13XX_TIMER0 (8)
81#define IRQ_IOP13XX_TIMER1 (9)
82#define IRQ_IOP13XX_I2C_0 (10)
83#define IRQ_IOP13XX_I2C_1 (11)
84#define IRQ_IOP13XX_MSG (12)
85#define IRQ_IOP13XX_MSGIBQ (13)
86#define IRQ_IOP13XX_ATU_IM (14)
87#define IRQ_IOP13XX_ATU_BIST (15)
88#define IRQ_IOP13XX_PPMU (16)
89#define IRQ_IOP13XX_COREPMU (17)
90#define IRQ_IOP13XX_CORECACHE (18)
91#define IRQ_IOP13XX_RSVD_19 (19)
92#define IRQ_IOP13XX_RSVD_20 (20)
93#define IRQ_IOP13XX_RSVD_21 (21)
94#define IRQ_IOP13XX_RSVD_22 (22)
95#define IRQ_IOP13XX_RSVD_23 (23)
96#define IRQ_IOP13XX_XINT0 (24)
97#define IRQ_IOP13XX_XINT1 (25)
98#define IRQ_IOP13XX_XINT2 (26)
99#define IRQ_IOP13XX_XINT3 (27)
100#define IRQ_IOP13XX_XINT4 (28)
101#define IRQ_IOP13XX_XINT5 (29)
102#define IRQ_IOP13XX_XINT6 (30)
103#define IRQ_IOP13XX_XINT7 (31)
104 /* IINTSRC1 bit */
105#define IRQ_IOP13XX_XINT8 (32) /* 0 */
106#define IRQ_IOP13XX_XINT9 (33) /* 1 */
107#define IRQ_IOP13XX_XINT10 (34) /* 2 */
108#define IRQ_IOP13XX_XINT11 (35) /* 3 */
109#define IRQ_IOP13XX_XINT12 (36) /* 4 */
110#define IRQ_IOP13XX_XINT13 (37) /* 5 */
111#define IRQ_IOP13XX_XINT14 (38) /* 6 */
112#define IRQ_IOP13XX_XINT15 (39) /* 7 */
113#define IRQ_IOP13XX_RSVD_40 (40) /* 8 */
114#define IRQ_IOP13XX_RSVD_41 (41) /* 9 */
115#define IRQ_IOP13XX_RSVD_42 (42) /* 10 */
116#define IRQ_IOP13XX_RSVD_43 (43) /* 11 */
117#define IRQ_IOP13XX_RSVD_44 (44) /* 12 */
118#define IRQ_IOP13XX_RSVD_45 (45) /* 13 */
119#define IRQ_IOP13XX_RSVD_46 (46) /* 14 */
120#define IRQ_IOP13XX_RSVD_47 (47) /* 15 */
121#define IRQ_IOP13XX_RSVD_48 (48) /* 16 */
122#define IRQ_IOP13XX_RSVD_49 (49) /* 17 */
123#define IRQ_IOP13XX_RSVD_50 (50) /* 18 */
124#define IRQ_IOP13XX_UART0 (51) /* 19 */
125#define IRQ_IOP13XX_UART1 (52) /* 20 */
126#define IRQ_IOP13XX_PBIE (53) /* 21 */
127#define IRQ_IOP13XX_ATU_CRW (54) /* 22 */
128#define IRQ_IOP13XX_ATU_ERR (55) /* 23 */
129#define IRQ_IOP13XX_MCU_ERR (56) /* 24 */
130#define IRQ_IOP13XX_ADMA0_ERR (57) /* 25 */
131#define IRQ_IOP13XX_ADMA1_ERR (58) /* 26 */
132#define IRQ_IOP13XX_ADMA2_ERR (59) /* 27 */
133#define IRQ_IOP13XX_RSVD_60 (60) /* 28 */
134#define IRQ_IOP13XX_RSVD_61 (61) /* 29 */
135#define IRQ_IOP13XX_MSG_ERR (62) /* 30 */
136#define IRQ_IOP13XX_RSVD_63 (63) /* 31 */
137 /* IINTSRC2 bit */
138#define IRQ_IOP13XX_INTERPROC (64) /* 0 */
139#define IRQ_IOP13XX_RSVD_65 (65) /* 1 */
140#define IRQ_IOP13XX_RSVD_66 (66) /* 2 */
141#define IRQ_IOP13XX_RSVD_67 (67) /* 3 */
142#define IRQ_IOP13XX_RSVD_68 (68) /* 4 */
143#define IRQ_IOP13XX_RSVD_69 (69) /* 5 */
144#define IRQ_IOP13XX_RSVD_70 (70) /* 6 */
145#define IRQ_IOP13XX_RSVD_71 (71) /* 7 */
146#define IRQ_IOP13XX_RSVD_72 (72) /* 8 */
147#define IRQ_IOP13XX_RSVD_73 (73) /* 9 */
148#define IRQ_IOP13XX_RSVD_74 (74) /* 10 */
149#define IRQ_IOP13XX_RSVD_75 (75) /* 11 */
150#define IRQ_IOP13XX_RSVD_76 (76) /* 12 */
151#define IRQ_IOP13XX_RSVD_77 (77) /* 13 */
152#define IRQ_IOP13XX_RSVD_78 (78) /* 14 */
153#define IRQ_IOP13XX_RSVD_79 (79) /* 15 */
154#define IRQ_IOP13XX_RSVD_80 (80) /* 16 */
155#define IRQ_IOP13XX_RSVD_81 (81) /* 17 */
156#define IRQ_IOP13XX_RSVD_82 (82) /* 18 */
157#define IRQ_IOP13XX_RSVD_83 (83) /* 19 */
158#define IRQ_IOP13XX_RSVD_84 (84) /* 20 */
159#define IRQ_IOP13XX_RSVD_85 (85) /* 21 */
160#define IRQ_IOP13XX_RSVD_86 (86) /* 22 */
161#define IRQ_IOP13XX_RSVD_87 (87) /* 23 */
162#define IRQ_IOP13XX_RSVD_88 (88) /* 24 */
163#define IRQ_IOP13XX_RSVD_89 (89) /* 25 */
164#define IRQ_IOP13XX_RSVD_90 (90) /* 26 */
165#define IRQ_IOP13XX_RSVD_91 (91) /* 27 */
166#define IRQ_IOP13XX_RSVD_92 (92) /* 28 */
167#define IRQ_IOP13XX_RSVD_93 (93) /* 29 */
168#define IRQ_IOP13XX_SIB_ERR (94) /* 30 */
169#define IRQ_IOP13XX_SRAM_ERR (95) /* 31 */
170 /* IINTSRC3 bit */
171#define IRQ_IOP13XX_I2C_2 (96) /* 0 */
172#define IRQ_IOP13XX_ATUE_BIST (97) /* 1 */
173#define IRQ_IOP13XX_ATUE_CRW (98) /* 2 */
174#define IRQ_IOP13XX_ATUE_ERR (99) /* 3 */
175#define IRQ_IOP13XX_IMU (100) /* 4 */
176#define IRQ_IOP13XX_RSVD_101 (101) /* 5 */
177#define IRQ_IOP13XX_RSVD_102 (102) /* 6 */
178#define IRQ_IOP13XX_TPMI0_OUT (103) /* 7 */
179#define IRQ_IOP13XX_TPMI1_OUT (104) /* 8 */
180#define IRQ_IOP13XX_TPMI2_OUT (105) /* 9 */
181#define IRQ_IOP13XX_TPMI3_OUT (106) /* 10 */
182#define IRQ_IOP13XX_ATUE_IMA (107) /* 11 */
183#define IRQ_IOP13XX_ATUE_IMB (108) /* 12 */
184#define IRQ_IOP13XX_ATUE_IMC (109) /* 13 */
185#define IRQ_IOP13XX_ATUE_IMD (110) /* 14 */
186#define IRQ_IOP13XX_MU_MSI_TB (111) /* 15 */
187#define IRQ_IOP13XX_RSVD_112 (112) /* 16 */
188#define IRQ_IOP13XX_RSVD_113 (113) /* 17 */
189#define IRQ_IOP13XX_RSVD_114 (114) /* 18 */
190#define IRQ_IOP13XX_RSVD_115 (115) /* 19 */
191#define IRQ_IOP13XX_RSVD_116 (116) /* 20 */
192#define IRQ_IOP13XX_RSVD_117 (117) /* 21 */
193#define IRQ_IOP13XX_RSVD_118 (118) /* 22 */
194#define IRQ_IOP13XX_RSVD_119 (119) /* 23 */
195#define IRQ_IOP13XX_RSVD_120 (120) /* 24 */
196#define IRQ_IOP13XX_RSVD_121 (121) /* 25 */
197#define IRQ_IOP13XX_RSVD_122 (122) /* 26 */
198#define IRQ_IOP13XX_RSVD_123 (123) /* 27 */
199#define IRQ_IOP13XX_RSVD_124 (124) /* 28 */
200#define IRQ_IOP13XX_RSVD_125 (125) /* 29 */
201#define IRQ_IOP13XX_RSVD_126 (126) /* 30 */
202#define IRQ_IOP13XX_HPI (127) /* 31 */
203
204#define NR_IOP13XX_IRQS (IRQ_IOP13XX_HPI + 1)
205#define NR_IRQS NR_IOP13XX_IRQS
206
207#endif /* _IOP13XX_IRQ_H_ */
diff --git a/include/asm-arm/arch-iop13xx/memory.h b/include/asm-arm/arch-iop13xx/memory.h
new file mode 100644
index 000000000000..031a0fa78eff
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/memory.h
@@ -0,0 +1,64 @@
1#ifndef __ASM_ARCH_MEMORY_H
2#define __ASM_ARCH_MEMORY_H
3
4#include <asm/arch/hardware.h>
5
6/*
7 * Physical DRAM offset.
8 */
9#define PHYS_OFFSET UL(0x00000000)
10#define TASK_SIZE UL(0x3f000000)
11#define PAGE_OFFSET UL(0x40000000)
12#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
13
14#ifndef __ASSEMBLY__
15
16#if defined(CONFIG_ARCH_IOP13XX)
17#define IOP13XX_PMMR_V_START (IOP13XX_PMMR_VIRT_MEM_BASE)
18#define IOP13XX_PMMR_V_END (IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_SIZE)
19#define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE)
20#define IOP13XX_PMMR_P_END (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE)
21
22/*
23 * Virtual view <-> PCI DMA view memory address translations
24 * virt_to_bus: Used to translate the virtual address to an
25 * address suitable to be passed to set_dma_addr
26 * bus_to_virt: Used to convert an address for DMA operations
27 * to an address that the kernel can use.
28 */
29
30/* RAM has 1:1 mapping on the PCIe/x Busses */
31#define __virt_to_bus(x) (__virt_to_phys(x))
32#define __bus_to_virt(x) (__phys_to_virt(x))
33
34#define virt_to_lbus(x) \
35(( ((void*)(x) >= (void*)IOP13XX_PMMR_V_START) && \
36((void*)(x) < (void*)IOP13XX_PMMR_V_END) ) ? \
37((x) - IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_PHYS_MEM_BASE) : \
38((x) - PAGE_OFFSET + PHYS_OFFSET))
39
40#define lbus_to_virt(x) \
41(( ((x) >= IOP13XX_PMMR_P_START) && ((x) < IOP13XX_PMMR_P_END) ) ? \
42((x) - IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_VIRT_MEM_BASE ) : \
43((x) - PHYS_OFFSET + PAGE_OFFSET))
44
45/* Device is an lbus device if it is on the platform bus of the IOP13XX */
46#define is_lbus_device(dev) (dev &&\
47 (strncmp(dev->bus->name, "platform", 8) == 0))
48
49#define __arch_page_to_dma(dev, page) \
50({is_lbus_device(dev) ? (dma_addr_t)virt_to_lbus(page_address(page)) : \
51(dma_addr_t)__virt_to_bus(page_address(page));})
52
53#define __arch_dma_to_virt(dev, addr) \
54({is_lbus_device(dev) ? lbus_to_virt(addr) : __bus_to_virt(addr);})
55
56#define __arch_virt_to_dma(dev, addr) \
57({is_lbus_device(dev) ? virt_to_lbus(addr) : __virt_to_bus(addr);})
58
59#endif /* CONFIG_ARCH_IOP13XX */
60#endif /* !ASSEMBLY */
61
62#define PFN_TO_NID(addr) (0)
63
64#endif
diff --git a/include/asm-arm/arch-iop13xx/pci.h b/include/asm-arm/arch-iop13xx/pci.h
new file mode 100644
index 000000000000..4041f30d4cd3
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/pci.h
@@ -0,0 +1,57 @@
1#ifndef _IOP13XX_PCI_H_
2#define _IOP13XX_PCI_H_
3#include <asm/arch/irqs.h>
4#include <asm/io.h>
5
6struct pci_sys_data;
7struct hw_pci;
8int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
9struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
10void iop13xx_atu_select(struct hw_pci *plat_pci);
11void iop13xx_pci_init(void);
12void iop13xx_map_pci_memory(void);
13
14#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY | \
15 PCI_STATUS_SIG_TARGET_ABORT | \
16 PCI_STATUS_REC_TARGET_ABORT | \
17 PCI_STATUS_REC_TARGET_ABORT | \
18 PCI_STATUS_REC_MASTER_ABORT | \
19 PCI_STATUS_SIG_SYSTEM_ERROR | \
20 PCI_STATUS_DETECTED_PARITY)
21
22#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR | \
23 IOP13XX_ATUE_STAT_ROOT_SYS_ERR | \
24 IOP13XX_ATUE_STAT_PCI_IFACE_ERR | \
25 IOP13XX_ATUE_STAT_ERR_COR | \
26 IOP13XX_ATUE_STAT_ERR_UNCOR | \
27 IOP13XX_ATUE_STAT_CRS | \
28 IOP13XX_ATUE_STAT_DET_PAR_ERR | \
29 IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
30 IOP13XX_ATUE_STAT_SIG_TABORT | \
31 IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
32 IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
33
34#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM | \
35 IOP13XX_ATUX_STAT_REC_SCEM | \
36 IOP13XX_ATUX_STAT_TX_SERR | \
37 IOP13XX_ATUX_STAT_DET_PAR_ERR | \
38 IOP13XX_ATUX_STAT_INT_REC_MABORT | \
39 IOP13XX_ATUX_STAT_REC_SERR | \
40 IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
41 IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
42 IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
43 IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
44
45/* PCI interrupts
46 */
47#define ATUX_INTA IRQ_IOP13XX_XINT0
48#define ATUX_INTB IRQ_IOP13XX_XINT1
49#define ATUX_INTC IRQ_IOP13XX_XINT2
50#define ATUX_INTD IRQ_IOP13XX_XINT3
51
52#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
53#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
54#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
55#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
56
57#endif /* _IOP13XX_PCI_H_ */
diff --git a/include/asm-arm/arch-iop13xx/system.h b/include/asm-arm/arch-iop13xx/system.h
new file mode 100644
index 000000000000..ee3a62530af2
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/system.h
@@ -0,0 +1,59 @@
1/*
2 * linux/include/asm-arm/arch-iop13xx/system.h
3 *
4 * Copyright (C) 2004 Intel Corp.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10#include <asm/arch/iop13xx.h>
11static inline void arch_idle(void)
12{
13 cpu_do_idle();
14}
15
16/* WDTCR CP6 R7 Page 9 */
17static inline u32 read_wdtcr(void)
18{
19 u32 val;
20 asm volatile("mrc p6, 0, %0, c7, c9, 0":"=r" (val));
21 return val;
22}
23static inline void write_wdtcr(u32 val)
24{
25 asm volatile("mcr p6, 0, %0, c7, c9, 0"::"r" (val));
26}
27
28/* WDTSR CP6 R8 Page 9 */
29static inline u32 read_wdtsr(void)
30{
31 u32 val;
32 asm volatile("mrc p6, 0, %0, c8, c9, 0":"=r" (val));
33 return val;
34}
35static inline void write_wdtsr(u32 val)
36{
37 asm volatile("mcr p6, 0, %0, c8, c9, 0"::"r" (val));
38}
39
40#define IOP13XX_WDTCR_EN_ARM 0x1e1e1e1e
41#define IOP13XX_WDTCR_EN 0xe1e1e1e1
42#define IOP13XX_WDTCR_DIS_ARM 0x1f1f1f1f
43#define IOP13XX_WDTCR_DIS 0xf1f1f1f1
44#define IOP13XX_WDTSR_WRITE_EN (1 << 31)
45#define IOP13XX_WDTCR_IB_RESET (1 << 0)
46static inline void arch_reset(char mode)
47{
48 /*
49 * Reset the internal bus (warning both cores are reset)
50 */
51 u32 cp_flags = iop13xx_cp6_save();
52 write_wdtcr(IOP13XX_WDTCR_EN_ARM);
53 write_wdtcr(IOP13XX_WDTCR_EN);
54 write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
55 write_wdtcr(0x1000);
56 iop13xx_cp6_restore(cp_flags);
57
58 for(;;);
59}
diff --git a/include/asm-arm/arch-iop13xx/timex.h b/include/asm-arm/arch-iop13xx/timex.h
new file mode 100644
index 000000000000..f0c51dd97ed8
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/timex.h
@@ -0,0 +1,3 @@
1#include <asm/hardware.h>
2
3#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/include/asm-arm/arch-iop13xx/uncompress.h b/include/asm-arm/arch-iop13xx/uncompress.h
new file mode 100644
index 000000000000..b9525d59b7ad
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/uncompress.h
@@ -0,0 +1,24 @@
1#include <asm/types.h>
2#include <linux/serial_reg.h>
3#include <asm/hardware.h>
4#include <asm/processor.h>
5
6#define UART_BASE ((volatile u32 *)IOP13XX_UART1_PHYS)
7#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
8
9static inline void putc(char c)
10{
11 while ((UART_BASE[UART_LSR] & TX_DONE) != TX_DONE)
12 cpu_relax();
13 UART_BASE[UART_TX] = c;
14}
15
16static inline void flush(void)
17{
18}
19
20/*
21 * nothing to do
22 */
23#define arch_decomp_setup()
24#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-iop13xx/vmalloc.h b/include/asm-arm/arch-iop13xx/vmalloc.h
new file mode 100644
index 000000000000..c53456740345
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/vmalloc.h
@@ -0,0 +1,4 @@
1#ifndef _VMALLOC_H_
2#define _VMALLOC_H_
3#define VMALLOC_END 0xfa000000UL
4#endif
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-18 16:44:13 -0500