Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (54 commits)
  MAINTIANERS: just use Mike gmail e-mail for contact and pawn the serial driver off onto Sonic
  [Blackfin] arch: remove old I2C BF54x porting.
  [Blackfin] arch: Add the semtimedop syscall.  Upstream uClibc doesn't compile without it.
  [Blackfin] arch: fix bug kernel boot message: memory information is not reasonable
  [Blackfin] arch: use common flash driver to setup partitions rather than the bf5xx-flash driver
  [Blackfin] arch: Fix bug - kernel build with Debug option enabled fails to boot up
  [Blackfin] arch: Fix bug Only RTC interrupt can wake up deeper sleep core.
  [Blackfin] arch: Add proper SW System Reset delay sequence
  [Blackfin] arch: Update copyright date
  [Blackfin] arch: GPIO API cleanup and anomaly update
  [Blackfin] arch: Fix BUG gpio_direction_output API is not compatitable with GENERIC_GPIO API interface
  [Blackfin] arch: Initial checkin of the memory protection support.
  [Blackfin] arch: set_bfin_dma_config shouldnt set SYNC or RESTART by default - add argument or option
  [Blackfin] arch: Add some comments - fix semicolons
  [Blackfin] arch: move all code related to CPLB handling into a new subdirectory under kernel/
  [Blackfin] arch: print out list of modules if kernel is crashing and tell people if the kernel is tainted 
  [Blackfin] arch: enable generic GPIO based I2C driver in STAMP-BF533, EZKIT-BF533 and EZKIT-BF561 boards
  [Blackfin] arch: Don't oops_in_progress if single step is comming from the kernel
  [Blackfin] arch: Fix BUG - kernel sometimes would stuck with KEYBOARD_GPIO on
  [Blackfin] arch: update to latest anomaly sheets
  ...

91 files changed, 2763 insertions, 760 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 59db481c77de..29371226f682 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -758,22 +758,20 @@ S:	Supported
 
 BLACKFIN RTC DRIVER
 P:      Mike Frysinger
-M:      michael.frysinger@analog.com
 M:      vapier.adi@gmail.com
 L:      uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
 W:      http://blackfin.uclinux.org
 S:      Supported
 
 BLACKFIN SERIAL DRIVER
-P:      Aubrey Li
-M:      aubrey.li@analog.com
+P:      Sonic Zhang
+M:      sonic.zhang@analog.com
 L:      uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
 W:      http://blackfin.uclinux.org
 S:      Supported
 
 BLACKFIN WATCHDOG DRIVER
 P:      Mike Frysinger
-M:      michael.frysinger@analog.com
 M:      vapier.adi@gmail.com
 L:      uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
 W:      http://blackfin.uclinux.org
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 25232ba08119..fc7ca86ac8bf 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -85,11 +85,26 @@ config BF522
         help
           BF522 Processor Support.
 
+config BF523
+        bool "BF523"
+        help
+          BF523 Processor Support.
+
+config BF524
+        bool "BF524"
+        help
+          BF524 Processor Support.
+
 config BF525
         bool "BF525"
         help
           BF525 Processor Support.
 
+config BF526
+        bool "BF526"
+        help
+          BF526 Processor Support.
+
 config BF527
         bool "BF527"
         help
@@ -198,7 +213,7 @@ endchoice
 
 config BF52x
         bool
-        depends on (BF522 || BF525 || BF527)
+        depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
         default y
 
 config BF53x
@@ -253,11 +268,6 @@ config MEM_MT48LC32M16A2TG_75
         depends on (BFIN527_EZKIT)
         default y
 
-config BFIN_SHARED_FLASH_ENET
-        bool
-        depends on (BFIN533_STAMP)
-        default y
-
 source "arch/blackfin/mach-bf527/Kconfig"
 source "arch/blackfin/mach-bf533/Kconfig"
 source "arch/blackfin/mach-bf561/Kconfig"
@@ -317,7 +327,7 @@ config VCO_MULT
         range 1 64
         default "22" if BFIN533_EZKIT
         default "45" if BFIN533_STAMP
-        default "20" if (BFIN537_STAMP || BFIN527_EZKIT)
+        default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT)
         default "22" if BFIN533_BLUETECHNIX_CM
         default "20" if BFIN537_BLUETECHNIX_CM
         default "20" if BFIN561_BLUETECHNIX_CM
@@ -354,7 +364,7 @@ config SCLK_DIV
         range 1 15
         default 5 if BFIN533_EZKIT
         default 5 if BFIN533_STAMP
-        default 4 if (BFIN537_STAMP || BFIN527_EZKIT)
+        default 4 if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT)
         default 5 if BFIN533_BLUETECHNIX_CM
         default 4 if BFIN537_BLUETECHNIX_CM
         default 4 if BFIN561_BLUETECHNIX_CM
@@ -371,7 +381,10 @@ config SCLK_DIV
 config MAX_VCO_HZ
         int
         default 600000000 if BF522
+        default 400000000 if BF523
+        default 400000000 if BF524
         default 600000000 if BF525
+        default 400000000 if BF526
         default 600000000 if BF527
         default 400000000 if BF531
         default 400000000 if BF532
@@ -383,6 +396,8 @@ config MAX_VCO_HZ
         default 533333333 if BF539
         default 600000000 if BF542
         default 533333333 if BF544
+        default 600000000 if BF547
+        default 600000000 if BF548
         default 533333333 if BF549
         default 600000000 if BF561
 
@@ -409,6 +424,7 @@ config MEM_SIZE
         default  32 if BFIN533_EZKIT
         default  64 if BFIN527_EZKIT
         default  64 if BFIN537_STAMP
+        default  64 if BFIN548_EZKIT
         default  64 if BFIN561_EZKIT
         default 128 if BFIN533_STAMP
         default  64 if PNAV10
@@ -416,6 +432,7 @@ config MEM_SIZE
 
 config MEM_ADD_WIDTH
         int "SDRAM Memory Address Width"
+        depends on (!BF54x)
         default  9 if BFIN533_EZKIT
         default  9 if BFIN561_EZKIT
         default  9 if H8606_HVSISTEMAS
@@ -424,6 +441,19 @@ config MEM_ADD_WIDTH
         default 11 if BFIN533_STAMP
         default 10 if PNAV10
 
+
+choice
+        prompt "DDR SDRAM Chip Type"
+        depends on BFIN548_EZKIT
+        default MEM_MT46V32M16_5B
+
+config MEM_MT46V32M16_6T
+        bool "MT46V32M16_6T"
+
+config MEM_MT46V32M16_5B
+        bool "MT46V32M16_5B"
+endchoice
+
 config ENET_FLASH_PIN
         int "PF port/pin used for flash and ethernet sharing"
         depends on (BFIN533_STAMP)
@@ -448,40 +478,6 @@ config BOOT_LOAD
           memory region is used to capture NULL pointer references as well
           as some core kernel functions.
 
-comment "LED Status Indicators"
-        depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM)
-
-config BFIN_ALIVE_LED
-        bool "Enable Board Alive"
-        depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM)
-        default n
-        help
-          Blink the LEDs you select when the kernel is running.  Helps detect
-          a hung kernel.
-
-config BFIN_ALIVE_LED_NUM
-        int "LED"
-        depends on BFIN_ALIVE_LED
-        range 1 3 if BFIN533_STAMP
-        default "3" if BFIN533_STAMP
-        help
-          Select the LED (marked on the board) for you to blink.
-
-config BFIN_IDLE_LED
-        bool "Enable System Load/Idle LED"
-        depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM)
-        default n
-        help
-          Blinks the LED you select when to determine kernel load.
-
-config BFIN_IDLE_LED_NUM
-        int "LED"
-        depends on BFIN_IDLE_LED
-        range 1 3 if BFIN533_STAMP
-        default "2" if BFIN533_STAMP
-        help
-          Select the LED (marked on the board) for you to blink.
-
 choice
         prompt "Blackfin Exception Scratch Register"
         default BFIN_SCRATCH_REG_RETN
@@ -528,41 +524,6 @@ config BFIN_SCRATCH_REG_CYCLES
 
 endchoice
 
-#
-# Sorry - but you need to put the hex address here -
-#
-
-# Flag Data register
-config BFIN_ALIVE_LED_PORT
-        hex
-        default 0xFFC00700 if (BFIN533_STAMP)
-
-# Peripheral Flag Direction Register
-config BFIN_ALIVE_LED_DPORT
-        hex
-        default 0xFFC00730 if (BFIN533_STAMP)
-
-config BFIN_ALIVE_LED_PIN
-        hex
-        default 0x04 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 1)
-        default 0x08 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 2)
-        default 0x10 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 3)
-
-config BFIN_IDLE_LED_PORT
-        hex
-        default 0xFFC00700 if (BFIN533_STAMP)
-
-# Peripheral Flag Direction Register
-config BFIN_IDLE_LED_DPORT
-        hex
-        default 0xFFC00730 if (BFIN533_STAMP)
-
-config BFIN_IDLE_LED_PIN
-        hex
-        default 0x04 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 1)
-        default 0x08 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 2)
-        default 0x10 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 3)
-
 endmenu
 
 
@@ -799,6 +760,15 @@ config L1_MAX_PIECE
           Set the max memory pieces for the L1 SRAM allocation algorithm.
           Min value is 16. Max value is 1024.
 
+
+config MPU
+        bool "Enable the memory protection unit (EXPERIMENTAL)"
+        default n
+        help
+          Use the processor's MPU to protect applications from accessing
+          memory they do not own.  This comes at a performance penalty
+          and is recommended only for debugging.
+
 comment "Asynchonous Memory Configuration"
 
 menu "EBIU_AMGCTL Global Control"
@@ -808,7 +778,6 @@ config C_AMCKEN
 
 config C_CDPRIO
         bool "DMA has priority over core for ext. accesses"
-        depends on !BF54x
         default n
 
 config C_B0PEN
@@ -949,8 +918,10 @@ endchoice
 config PM_WAKEUP_SIC_IWR
         hex "Wakeup Events (SIC_IWR)"
         depends on PM_WAKEUP_GPIO_BY_SIC_IWR
-        default 0x80000000 if (BF537 || BF536 || BF534)
-        default 0x100000 if (BF533 || BF532 || BF531)
+        default 0x8 if (BF537 || BF536 || BF534)
+        default 0x80 if (BF533 || BF532 || BF531)
+        default 0x80 if (BF54x)
+        default 0x80 if (BF52x)
 
 config PM_WAKEUP_GPIO_NUMBER
         int "Wakeup GPIO number"
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index c47e000f8324..0edc402fef54 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -21,7 +21,10 @@ KBUILD_DEFCONFIG := BF537-STAMP_defconfig
 
 # setup the machine name and the machine dependent settings
 machine-$(CONFIG_BF522) := bf527
+machine-$(CONFIG_BF523) := bf527
+machine-$(CONFIG_BF524) := bf527
 machine-$(CONFIG_BF525) := bf527
+machine-$(CONFIG_BF526) := bf527
 machine-$(CONFIG_BF527) := bf527
 machine-$(CONFIG_BF531) := bf533
 machine-$(CONFIG_BF532) := bf533
@@ -39,7 +42,10 @@ MACHINE := $(machine-y)
 export MACHINE
 
 cpu-$(CONFIG_BF522) := bf522
+cpu-$(CONFIG_BF523) := bf523
+cpu-$(CONFIG_BF524) := bf524
 cpu-$(CONFIG_BF525) := bf525
+cpu-$(CONFIG_BF526) := bf526
 cpu-$(CONFIG_BF527) := bf527
 cpu-$(CONFIG_BF531) := bf531
 cpu-$(CONFIG_BF532) := bf532
@@ -76,6 +82,12 @@ core-y   += arch/$(ARCH)/mach-$(MACHINE)/
 core-y   += arch/$(ARCH)/mach-$(MACHINE)/boards/
 endif
 
+ifeq ($(CONFIG_MPU),y)
+core-y  += arch/$(ARCH)/kernel/cplb-mpu/
+else
+core-y  += arch/$(ARCH)/kernel/cplb-nompu/
+endif
+
 libs-y   += arch/$(ARCH)/lib/
 
 drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index fa6eb4e00fae..d59ee1530bd4 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.12
+# Linux kernel version: 2.6.22.14
+# Thu Nov 29 17:32:47 2007
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -153,8 +154,8 @@ CONFIG_BFIN527_EZKIT=y
 CONFIG_BF527_SPORT0_PORTG=y
 CONFIG_BF527_SPORT0_TSCLK_PG10=y
 # CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
-# CONFIG_BF527_UART1_PORTF is not set
-CONFIG_BF527_UART1_PORTG=y
+CONFIG_BF527_UART1_PORTF=y
+# CONFIG_BF527_UART1_PORTG is not set
 # CONFIG_BF527_NAND_D_PORTF is not set
 CONFIG_BF527_NAND_D_PORTH=y
 
@@ -232,7 +233,7 @@ CONFIG_CLKIN_HZ=25000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
 CONFIG_MIN_SCLK_HZ=27000000
 
 #
@@ -626,8 +627,8 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
 # CONFIG_AX88180 is not set
+CONFIG_NETDEV_10000=y
 
 #
 # Wireless LAN
@@ -1183,7 +1184,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1208,7 +1209,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
+CONFIG_SECURITY_CAPABILITIES=m
 
 #
 # Cryptographic options
@@ -1219,7 +1220,7 @@ CONFIG_SECURITY_CAPABILITIES=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 4fdb49362ba3..811711f59a25 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.12
+# Linux kernel version: 2.6.22.16
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # Processor and Board Settings
 #
 # CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
 # CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
 # CONFIG_BF527 is not set
 # CONFIG_BF531 is not set
 # CONFIG_BF532 is not set
@@ -194,7 +197,7 @@ CONFIG_CLKIN_HZ=27000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
 CONFIG_MAX_VCO_HZ=750000000
 CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
 CONFIG_MIN_SCLK_HZ=27000000
 
 #
@@ -267,6 +270,7 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_WB is not set
 CONFIG_BFIN_WT=y
 CONFIG_L1_MAX_PIECE=16
+# CONFIG_MPU is not set
 
 #
 # Asynchonous Memory Configuration
@@ -321,7 +325,7 @@ CONFIG_PM=y
 CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
 # CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x100000
+CONFIG_PM_WAKEUP_SIC_IWR=0x80
 
 #
 # CPU Frequency scaling
@@ -510,7 +514,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_INTELEXT is not set
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_MW320D=m
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
@@ -520,9 +523,6 @@ CONFIG_MTD_ROM=m
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BF5xx=m
-CONFIG_BFIN_FLASH_SIZE=0x400000
-CONFIG_EBIU_FLASH_BASE=0x20000000
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -610,8 +610,8 @@ CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
 # CONFIG_AX88180 is not set
+CONFIG_NETDEV_10000=y
 
 #
 # Wireless LAN
@@ -680,7 +680,6 @@ CONFIG_INPUT_EVDEV=m
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_AD5304 is not set
-# CONFIG_BF5xx_FBDMA is not set
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index b04e8e533e9a..9b7123cf27a3 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.12
+# Linux kernel version: 2.6.22.16
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # Processor and Board Settings
 #
 # CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
 # CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
 # CONFIG_BF527 is not set
 # CONFIG_BF531 is not set
 # CONFIG_BF532 is not set
@@ -140,7 +143,6 @@ CONFIG_BF_REV_0_3=y
 CONFIG_BF53x=y
 CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC64M4A2FB_7E=y
-CONFIG_BFIN_SHARED_FLASH_ENET=y
 # CONFIG_BFIN533_EZKIT is not set
 CONFIG_BFIN533_STAMP=y
 # CONFIG_BFIN533_BLUETECHNIX_CM is not set
@@ -195,7 +197,7 @@ CONFIG_CLKIN_HZ=11059200
 # CONFIG_BFIN_KERNEL_CLOCK is not set
 CONFIG_MAX_VCO_HZ=750000000
 CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
 CONFIG_MIN_SCLK_HZ=27000000
 
 #
@@ -215,18 +217,10 @@ CONFIG_MEM_ADD_WIDTH=11
 CONFIG_ENET_FLASH_PIN=0
 CONFIG_BOOT_LOAD=0x1000
 
-#
-# LED Status Indicators
-#
-# CONFIG_BFIN_ALIVE_LED is not set
-# CONFIG_BFIN_IDLE_LED is not set
+
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-CONFIG_BFIN_ALIVE_LED_PORT=0xFFC00700
-CONFIG_BFIN_ALIVE_LED_DPORT=0xFFC00730
-CONFIG_BFIN_IDLE_LED_PORT=0xFFC00700
-CONFIG_BFIN_IDLE_LED_DPORT=0xFFC00730
 
 #
 # Blackfin Kernel Optimizations
@@ -279,6 +273,7 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_WB is not set
 CONFIG_BFIN_WT=y
 CONFIG_L1_MAX_PIECE=16
+# CONFIG_MPU is not set
 
 #
 # Asynchonous Memory Configuration
@@ -333,7 +328,7 @@ CONFIG_PM=y
 CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
 # CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x100000
+CONFIG_PM_WAKEUP_SIC_IWR=0x80
 
 #
 # CPU Frequency scaling
@@ -522,7 +517,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_INTELEXT is not set
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_MW320D=m
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
@@ -532,17 +526,6 @@ CONFIG_MTD_ROM=m
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BF5xx=m
-CONFIG_BFIN_FLASH_SIZE=0x400000
-CONFIG_EBIU_FLASH_BASE=0x20000000
-
-#
-# FLASH_EBIU_AMBCTL Control
-#
-CONFIG_BFIN_FLASH_BANK_0=0x7BB0
-CONFIG_BFIN_FLASH_BANK_1=0x7BB0
-CONFIG_BFIN_FLASH_BANK_2=0x7BB0
-CONFIG_BFIN_FLASH_BANK_3=0x7BB0
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -630,8 +613,8 @@ CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
 # CONFIG_AX88180 is not set
+CONFIG_NETDEV_10000=y
 
 #
 # Wireless LAN
@@ -687,7 +670,6 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
-# CONFIG_BF53X_PFBUTTONS is not set
 CONFIG_TWI_KEYPAD=m
 CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39
 
@@ -711,8 +693,6 @@ CONFIG_BFIN_SPORT=y
 CONFIG_TWI_LCD=m
 CONFIG_TWI_LCD_SLAVE_ADDR=34
 # CONFIG_AD5304 is not set
-# CONFIG_BF5xx_TEA5764 is not set
-# CONFIG_BF5xx_FBDMA is not set
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -778,7 +758,6 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
-# CONFIG_I2C_BLACKFIN_GPIO is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index f812b66318b9..b37ccc681e7a 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.12
+# Linux kernel version: 2.6.22.16
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # Processor and Board Settings
 #
 # CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
 # CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
 # CONFIG_BF527 is not set
 # CONFIG_BF531 is not set
 # CONFIG_BF532 is not set
@@ -170,6 +173,7 @@ CONFIG_IRQ_WATCH=13
 CONFIG_BFIN537_STAMP=y
 # CONFIG_BFIN537_BLUETECHNIX_CM is not set
 # CONFIG_PNAV10 is not set
+# CONFIG_CAMSIG_MINOTAUR is not set
 # CONFIG_GENERIC_BF537_BOARD is not set
 
 #
@@ -201,7 +205,7 @@ CONFIG_CLKIN_HZ=25000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
 CONFIG_MIN_SCLK_HZ=27000000
 
 #
@@ -274,6 +278,7 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_WB is not set
 CONFIG_BFIN_WT=y
 CONFIG_L1_MAX_PIECE=16
+# CONFIG_MPU is not set
 
 #
 # Asynchonous Memory Configuration
@@ -328,7 +333,7 @@ CONFIG_PM=y
 CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
 # CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x80000000
+CONFIG_PM_WAKEUP_SIC_IWR=0x8
 
 #
 # CPU Frequency scaling
@@ -483,7 +488,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
 
 #
 # User Modules And Translation Layers
@@ -500,8 +505,8 @@ CONFIG_MTD_BLOCK=y
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
 CONFIG_MTD_GEN_PROBE=m
 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
@@ -515,9 +520,9 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_AMDSTD=m
 # CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_MW320D=m
+CONFIG_MTD_CFI_UTIL=m
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
@@ -525,11 +530,11 @@ CONFIG_MTD_ROM=m
 #
 # Mapping drivers for chip access
 #
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BF5xx=m
-CONFIG_BFIN_FLASH_SIZE=0x400000
-CONFIG_EBIU_FLASH_BASE=0x20000000
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_START=0x20000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -647,8 +652,8 @@ CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
 # CONFIG_AX88180 is not set
+CONFIG_NETDEV_10000=y
 
 #
 # Wireless LAN
@@ -704,7 +709,6 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
-# CONFIG_BF53X_PFBUTTONS is not set
 CONFIG_TWI_KEYPAD=m
 CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
 
@@ -728,8 +732,6 @@ CONFIG_BFIN_SPORT=y
 CONFIG_TWI_LCD=m
 CONFIG_TWI_LCD_SLAVE_ADDR=34
 # CONFIG_AD5304 is not set
-# CONFIG_BF5xx_TEA5764 is not set
-# CONFIG_BF5xx_FBDMA is not set
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -802,7 +804,6 @@ CONFIG_I2C_CHARDEV=m
 #
 # I2C Hardware Bus support
 #
-# CONFIG_I2C_BLACKFIN_GPIO is not set
 CONFIG_I2C_BLACKFIN_TWI=m
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 # CONFIG_I2C_GPIO is not set
@@ -957,6 +958,7 @@ CONFIG_LQ035_SLAVE_ADDR=0x58
 # CONFIG_FB_BFIN_LANDSCAPE is not set
 # CONFIG_FB_BFIN_BGR is not set
 # CONFIG_FB_BFIN_T350MCQB is not set
+# CONFIG_FB_HITACHI_TX09 is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_LOGO is not set
@@ -1008,12 +1010,22 @@ CONFIG_SND_BFIN_AD73311_SE=4
 #
 # System on Chip audio support
 #
-# CONFIG_SND_SOC is not set
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC=m
+CONFIG_SND_BF5XX_SOC=m
+CONFIG_SND_BF5XX_SOC_AC97=m
+# CONFIG_SND_BF5XX_SOC_WM8750 is not set
+# CONFIG_SND_BF5XX_SOC_WM8731 is not set
+CONFIG_SND_BF5XX_SOC_BF5xx=m
+CONFIG_SND_BF5XX_SPORT_NUM=0
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+CONFIG_SND_SOC_AD1980=m
 
 #
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
 
 #
 # HID Devices
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 48367cc9fe35..fd702161ef59 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.12
+# Linux kernel version: 2.6.22.16
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # Processor and Board Settings
 #
 # CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
 # CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
 # CONFIG_BF527 is not set
 # CONFIG_BF531 is not set
 # CONFIG_BF532 is not set
@@ -126,8 +129,8 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_BF542 is not set
 # CONFIG_BF544 is not set
 # CONFIG_BF547 is not set
-# CONFIG_BF548 is not set
-CONFIG_BF549=y
+CONFIG_BF548=y
+# CONFIG_BF549 is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_0_0=y
 # CONFIG_BF_REV_0_1 is not set
@@ -265,9 +268,9 @@ CONFIG_PINT3_ASSIGN=0x02020303
 #
 CONFIG_CLKIN_HZ=25000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=533000000
+CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
 CONFIG_MIN_SCLK_HZ=27000000
 
 #
@@ -283,7 +286,8 @@ CONFIG_HZ=250
 # Memory Setup
 #
 CONFIG_MEM_SIZE=64
-CONFIG_MEM_ADD_WIDTH=10
+# CONFIG_MEM_MT46V32M16_6T is not set
+CONFIG_MEM_MT46V32M16_5B=y
 CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
@@ -340,6 +344,7 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_WB is not set
 CONFIG_BFIN_WT=y
 CONFIG_L1_MAX_PIECE=16
+# CONFIG_MPU is not set
 
 #
 # Asynchonous Memory Configuration
@@ -349,6 +354,7 @@ CONFIG_L1_MAX_PIECE=16
 # EBIU_AMGCTL Global Control
 #
 CONFIG_C_AMCKEN=y
+# CONFIG_C_CDPRIO is not set
 # CONFIG_C_AMBEN is not set
 # CONFIG_C_AMBEN_B0 is not set
 # CONFIG_C_AMBEN_B0_B1 is not set
@@ -362,9 +368,9 @@ CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x5554
 CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0x99B3
-CONFIG_EBUI_MBSCTLVAL=0x0
-CONFIG_EBUI_MODEVAL=0x1
-CONFIG_EBUI_FCTLVAL=0x6
+CONFIG_EBIU_MBSCTLVAL=0x0
+CONFIG_EBIU_MODEVAL=0x1
+CONFIG_EBIU_FCTLVAL=0x6
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -537,7 +543,6 @@ CONFIG_MTD_CFI_I2=y
 CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_MW320D is not set
 CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
@@ -549,9 +554,8 @@ CONFIG_MTD_RAM=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x400000
+CONFIG_MTD_PHYSMAP_LEN=0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_BF5xx is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -690,8 +694,8 @@ CONFIG_MII=y
 CONFIG_SMSC911X=y
 # CONFIG_DM9000 is not set
 CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
 # CONFIG_AX88180 is not set
+CONFIG_NETDEV_10000=y
 
 #
 # Wireless LAN
@@ -719,7 +723,7 @@ CONFIG_NETDEV_10000=y
 #
 # Input device support
 #
-CONFIG_INPUT=m
+CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
 
@@ -745,7 +749,8 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_GPIO is not set
-CONFIG_KEYBOARD_BFIN=m
+CONFIG_KEYBOARD_BFIN=y
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -768,7 +773,6 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
-# CONFIG_BF53X_PFBUTTONS is not set
 # CONFIG_TWI_KEYPAD is not set
 
 #
@@ -786,13 +790,16 @@ CONFIG_INPUT_MISC=y
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
 # CONFIG_AD5304 is not set
-# CONFIG_BF5xx_TEA5764 is not set
-# CONFIG_BF5xx_FBDMA is not set
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -858,7 +865,6 @@ CONFIG_I2C_CHARDEV=y
 #
 # I2C Hardware Bus support
 #
-# CONFIG_I2C_BLACKFIN_GPIO is not set
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 # CONFIG_I2C_GPIO is not set
@@ -976,12 +982,12 @@ CONFIG_DAB=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
-CONFIG_FB=m
+CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -998,11 +1004,34 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # CONFIG_FB_BFIN_7171 is not set
 # CONFIG_FB_BFIN_7393 is not set
-CONFIG_FB_BF54X_LQ043=m
+CONFIG_FB_BF54X_LQ043=y
 # CONFIG_FB_BFIN_T350MCQB is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_LOGO is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_BLACKFIN_VGA16 is not set
+CONFIG_LOGO_BLACKFIN_CLUT224=y
 
 #
 # Sound
@@ -1051,7 +1080,8 @@ CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set
 # CONFIG_SND_BF5XX_SOC_WM8731 is not set
 CONFIG_SND_BF5XX_SPORT_NUM=0
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+CONFIG_SND_BF5XX_HAVE_COLD_RESET=y
+CONFIG_SND_BF5XX_RESET_GPIO_NUM=19
 CONFIG_SND_SOC_AD1980=y
 
 #
@@ -1403,7 +1433,7 @@ CONFIG_NLS_UTF8=m
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1428,7 +1458,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
+CONFIG_SECURITY_CAPABILITIES=m
 
 #
 # Cryptographic options
@@ -1439,7 +1469,7 @@ CONFIG_SECURITY_CAPABILITIES=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index e9f100b45eb1..8546994939fb 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.12
+# Linux kernel version: 2.6.22.16
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # Processor and Board Settings
 #
 # CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
 # CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
 # CONFIG_BF527 is not set
 # CONFIG_BF531 is not set
 # CONFIG_BF532 is not set
@@ -238,7 +241,7 @@ CONFIG_CLKIN_HZ=30000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
 CONFIG_MIN_SCLK_HZ=27000000
 
 #
@@ -311,6 +314,7 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_WB is not set
 CONFIG_BFIN_WT=y
 CONFIG_L1_MAX_PIECE=16
+# CONFIG_MPU is not set
 
 #
 # Asynchonous Memory Configuration
@@ -512,7 +516,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
 
 #
 # User Modules And Translation Layers
@@ -529,8 +533,8 @@ CONFIG_MTD_BLOCK=y
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
 CONFIG_MTD_GEN_PROBE=m
 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
@@ -544,9 +548,9 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_AMDSTD=m
 # CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_MW320D=m
+CONFIG_MTD_CFI_UTIL=m
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
@@ -554,12 +558,11 @@ CONFIG_MTD_ROM=m
 #
 # Mapping drivers for chip access
 #
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_EZKIT561 is not set
-CONFIG_MTD_BF5xx=m
-CONFIG_BFIN_FLASH_SIZE=0x0400000
-CONFIG_EBIU_FLASH_BASE=0x20000000
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_START=0x20000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -647,8 +650,8 @@ CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
 # CONFIG_AX88180 is not set
+CONFIG_NETDEV_10000=y
 
 #
 # Wireless LAN
@@ -717,7 +720,6 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_AD5304 is not set
-# CONFIG_BF5xx_FBDMA is not set
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 8a4cfb293b27..318b9b692a48 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -7,7 +7,7 @@ extra-y := init_task.o vmlinux.lds
 obj-y := \
         entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
         sys_bfin.o time.o traps.o irqchip.o dma-mapping.o flat.o \
-        fixed_code.o cplbinit.o cacheinit.o reboot.o bfin_gpio.o
+        fixed_code.o reboot.o bfin_gpio.o
 
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
 obj-$(CONFIG_MODULES)                += module.o
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index b54446055a43..fa9debe8d5f4 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -339,13 +339,13 @@ EXPORT_SYMBOL(set_dma_config);
 
 unsigned short
 set_bfin_dma_config(char direction, char flow_mode,
-                    char intr_mode, char dma_mode, char width)
+                    char intr_mode, char dma_mode, char width, char syncmode)
 {
         unsigned short config;
 
         config =
             ((direction << 1) | (width << 2) | (dma_mode << 4) |
-             (intr_mode << 6) | (flow_mode << 12) | RESTART);
+             (intr_mode << 6) | (flow_mode << 12) | (syncmode << 5));
         return config;
 }
 EXPORT_SYMBOL(set_bfin_dma_config);
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index ce85d4bf34ca..6bbe0a2fccb8 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -7,7 +7,7 @@
  * Description:  GPIO Abstraction Layer
  *
  * Modified:
- *               Copyright 2007 Analog Devices Inc.
+ *               Copyright 2008 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
@@ -83,6 +83,7 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/err.h>
+#include <linux/proc_fs.h>
 #include <asm/blackfin.h>
 #include <asm/gpio.h>
 #include <asm/portmux.h>
@@ -136,7 +137,6 @@ static unsigned short *port_fer[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
         (unsigned short *) PORTG_FER,
         (unsigned short *) PORTH_FER,
 };
-
 #endif
 
 #ifdef BF527_FAMILY
@@ -178,15 +178,13 @@ static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
 #endif
 
 static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
-static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS + 16)];
+static unsigned short reserved_peri_map[gpio_bank(MAX_RESOURCES)];
 
-#define MAX_RESOURCES           256
 #define RESOURCE_LABEL_SIZE     16
 
-struct str_ident {
+static struct str_ident {
         char name[RESOURCE_LABEL_SIZE];
-} *str_ident;
-
+} str_ident[MAX_RESOURCES];
 
 #ifdef CONFIG_PM
 static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
@@ -212,7 +210,7 @@ static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INT
 #endif /* CONFIG_PM */
 
 #if defined(BF548_FAMILY)
-inline int check_gpio(unsigned short gpio)
+inline int check_gpio(unsigned gpio)
 {
         if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
             || gpio == GPIO_PH14 || gpio == GPIO_PH15
@@ -222,7 +220,7 @@ inline int check_gpio(unsigned short gpio)
         return 0;
 }
 #else
-inline int check_gpio(unsigned short gpio)
+inline int check_gpio(unsigned gpio)
 {
         if (gpio >= MAX_BLACKFIN_GPIOS)
                 return -EINVAL;
@@ -230,9 +228,13 @@ inline int check_gpio(unsigned short gpio)
 }
 #endif
 
-static void set_label(unsigned short ident, const char *label)
+void gpio_error(unsigned gpio)
 {
+        printk(KERN_ERR "bfin-gpio: GPIO %d wasn't requested!\n", gpio);
+}
 
+static void set_label(unsigned short ident, const char *label)
+{
         if (label && str_ident) {
                 strncpy(str_ident[ident].name, label,
                          RESOURCE_LABEL_SIZE);
@@ -250,6 +252,11 @@ static char *get_label(unsigned short ident)
 
 static int cmp_label(unsigned short ident, const char *label)
 {
+        if (label == NULL) {
+                dump_stack();
+                printk(KERN_ERR "Please provide none-null label\n");
+        }
+
         if (label && str_ident)
                 return strncmp(str_ident[ident].name,
                                  label, strlen(label));
@@ -258,7 +265,7 @@ static int cmp_label(unsigned short ident, const char *label)
 }
 
 #if defined(BF527_FAMILY) || defined(BF537_FAMILY)
-static void port_setup(unsigned short gpio, unsigned short usage)
+static void port_setup(unsigned gpio, unsigned short usage)
 {
         if (!check_gpio(gpio)) {
                 if (usage == GPIO_USAGE)
@@ -269,7 +276,7 @@ static void port_setup(unsigned short gpio, unsigned short usage)
         }
 }
 #elif defined(BF548_FAMILY)
-static void port_setup(unsigned short gpio, unsigned short usage)
+static void port_setup(unsigned gpio, unsigned short usage)
 {
         if (usage == GPIO_USAGE)
                 gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
@@ -390,7 +397,7 @@ inline void portmux_setup(unsigned short portno, unsigned short function)
 #endif
 
 #ifndef BF548_FAMILY
-static void default_gpio(unsigned short gpio)
+static void default_gpio(unsigned gpio)
 {
         unsigned short bank, bitmask;
         unsigned long flags;
@@ -410,7 +417,6 @@ static void default_gpio(unsigned short gpio)
         gpio_bankb[bank]->edge &= ~bitmask;
         AWA_DUMMY_READ(edge);
         local_irq_restore(flags);
-
 }
 #else
 # define default_gpio(...)  do { } while (0)
@@ -418,12 +424,6 @@ static void default_gpio(unsigned short gpio)
 
 static int __init bfin_gpio_init(void)
 {
-        str_ident = kcalloc(MAX_RESOURCES,
-                                 sizeof(struct str_ident), GFP_KERNEL);
-        if (str_ident == NULL)
-                return -ENOMEM;
-
-        memset(str_ident, 0, MAX_RESOURCES * sizeof(struct str_ident));
 
         printk(KERN_INFO "Blackfin GPIO Controller\n");
 
@@ -454,10 +454,9 @@ arch_initcall(bfin_gpio_init);
 /* Set a specific bit */
 
 #define SET_GPIO(name) \
-void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
+void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
 { \
         unsigned long flags; \
-        BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
         local_irq_save(flags); \
         if (arg) \
                 gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
@@ -477,10 +476,9 @@ SET_GPIO(both)
 
 #if ANOMALY_05000311 || ANOMALY_05000323
 #define SET_GPIO_SC(name) \
-void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
+void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
 { \
         unsigned long flags; \
-        BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
         local_irq_save(flags); \
         if (arg) \
                 gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
@@ -492,9 +490,8 @@ void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
 EXPORT_SYMBOL(set_gpio_ ## name);
 #else
 #define SET_GPIO_SC(name) \
-void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
+void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
 { \
-        BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
         if (arg) \
                 gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
         else \
@@ -508,19 +505,17 @@ SET_GPIO_SC(maskb)
 SET_GPIO_SC(data)
 
 #if ANOMALY_05000311 || ANOMALY_05000323
-void set_gpio_toggle(unsigned short gpio)
+void set_gpio_toggle(unsigned gpio)
 {
         unsigned long flags;
-        BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
         local_irq_save(flags);
         gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
         AWA_DUMMY_READ(toggle);
         local_irq_restore(flags);
 }
 #else
-void set_gpio_toggle(unsigned short gpio)
+void set_gpio_toggle(unsigned gpio)
 {
-        BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
         gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
 }
 #endif
@@ -531,7 +526,7 @@ EXPORT_SYMBOL(set_gpio_toggle);
 
 #if ANOMALY_05000311 || ANOMALY_05000323
 #define SET_GPIO_P(name) \
-void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \
+void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
 { \
         unsigned long flags; \
         local_irq_save(flags); \
@@ -542,7 +537,7 @@ void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \
 EXPORT_SYMBOL(set_gpiop_ ## name);
 #else
 #define SET_GPIO_P(name) \
-void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \
+void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
 { \
         gpio_bankb[gpio_bank(gpio)]->name = arg; \
 } \
@@ -558,11 +553,10 @@ SET_GPIO_P(both)
 SET_GPIO_P(maska)
 SET_GPIO_P(maskb)
 
-
 /* Get a specific bit */
 #if ANOMALY_05000311 || ANOMALY_05000323
 #define GET_GPIO(name) \
-unsigned short get_gpio_ ## name(unsigned short gpio) \
+unsigned short get_gpio_ ## name(unsigned gpio) \
 { \
         unsigned long flags; \
         unsigned short ret; \
@@ -575,7 +569,7 @@ unsigned short get_gpio_ ## name(unsigned short gpio) \
 EXPORT_SYMBOL(get_gpio_ ## name);
 #else
 #define GET_GPIO(name) \
-unsigned short get_gpio_ ## name(unsigned short gpio) \
+unsigned short get_gpio_ ## name(unsigned gpio) \
 { \
         return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \
 } \
@@ -595,7 +589,7 @@ GET_GPIO(maskb)
 
 #if ANOMALY_05000311 || ANOMALY_05000323
 #define GET_GPIO_P(name) \
-unsigned short get_gpiop_ ## name(unsigned short gpio) \
+unsigned short get_gpiop_ ## name(unsigned gpio) \
 { \
         unsigned long flags; \
         unsigned short ret; \
@@ -608,7 +602,7 @@ unsigned short get_gpiop_ ## name(unsigned short gpio) \
 EXPORT_SYMBOL(get_gpiop_ ## name);
 #else
 #define GET_GPIO_P(name) \
-unsigned short get_gpiop_ ## name(unsigned short gpio) \
+unsigned short get_gpiop_ ## name(unsigned gpio) \
 { \
         return (gpio_bankb[gpio_bank(gpio)]->name);\
 } \
@@ -645,7 +639,7 @@ GET_GPIO_P(maskb)
 *************************************************************
 * MODIFICATION HISTORY :
 **************************************************************/
-int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type)
+int gpio_pm_wakeup_request(unsigned gpio, unsigned char type)
 {
         unsigned long flags;
 
@@ -653,7 +647,6 @@ int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type)
                 return -EINVAL;
 
         local_irq_save(flags);
-
         wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio);
         wakeup_flags_map[gpio] = type;
         local_irq_restore(flags);
@@ -662,7 +655,7 @@ int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type)
 }
 EXPORT_SYMBOL(gpio_pm_wakeup_request);
 
-void gpio_pm_wakeup_free(unsigned short gpio)
+void gpio_pm_wakeup_free(unsigned gpio)
 {
         unsigned long flags;
 
@@ -677,7 +670,7 @@ void gpio_pm_wakeup_free(unsigned short gpio)
 }
 EXPORT_SYMBOL(gpio_pm_wakeup_free);
 
-static int bfin_gpio_wakeup_type(unsigned short gpio, unsigned char type)
+static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type)
 {
         port_setup(gpio, GPIO_USAGE);
         set_gpio_dir(gpio, 0);
@@ -784,6 +777,14 @@ void gpio_pm_restore(void)
 }
 
 #endif
+#else /* BF548_FAMILY */
+
+unsigned short get_gpio_dir(unsigned gpio)
+{
+        return (0x01 & (gpio_array[gpio_bank(gpio)]->port_dir_clear >> gpio_sub_n(gpio)));
+}
+EXPORT_SYMBOL(get_gpio_dir);
+
 #endif /* BF548_FAMILY */
 
 /***********************************************************
@@ -1028,7 +1029,7 @@ EXPORT_SYMBOL(peripheral_free_list);
 * MODIFICATION HISTORY :
 **************************************************************/
 
-int gpio_request(unsigned short gpio, const char *label)
+int gpio_request(unsigned gpio, const char *label)
 {
         unsigned long flags;
 
@@ -1075,7 +1076,7 @@ int gpio_request(unsigned short gpio, const char *label)
 }
 EXPORT_SYMBOL(gpio_request);
 
-void gpio_free(unsigned short gpio)
+void gpio_free(unsigned gpio)
 {
         unsigned long flags;
 
@@ -1085,7 +1086,7 @@ void gpio_free(unsigned short gpio)
         local_irq_save(flags);
 
         if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
-                printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio);
+                gpio_error(gpio);
                 dump_stack();
                 local_irq_restore(flags);
                 return;
@@ -1101,44 +1102,55 @@ void gpio_free(unsigned short gpio)
 }
 EXPORT_SYMBOL(gpio_free);
 
+
 #ifdef BF548_FAMILY
-void gpio_direction_input(unsigned short gpio)
+int gpio_direction_input(unsigned gpio)
 {
         unsigned long flags;
 
-        BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+        if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+                gpio_error(gpio);
+                return -EINVAL;
+        }
 
         local_irq_save(flags);
         gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio);
         gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio);
         local_irq_restore(flags);
+
+        return 0;
 }
 EXPORT_SYMBOL(gpio_direction_input);
 
-void gpio_direction_output(unsigned short gpio)
+int gpio_direction_output(unsigned gpio, int value)
 {
         unsigned long flags;
 
-        BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+        if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+                gpio_error(gpio);
+                return -EINVAL;
+        }
 
         local_irq_save(flags);
         gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio);
+        gpio_set_value(gpio, value);
         gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio);
         local_irq_restore(flags);
+
+        return 0;
 }
 EXPORT_SYMBOL(gpio_direction_output);
 
-void gpio_set_value(unsigned short gpio, unsigned short arg)
+void gpio_set_value(unsigned gpio, int arg)
 {
         if (arg)
                 gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio);
         else
                 gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio);
-
 }
 EXPORT_SYMBOL(gpio_set_value);
 
-unsigned short gpio_get_value(unsigned short gpio)
+int gpio_get_value(unsigned gpio)
 {
         return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio)));
 }
@@ -1146,31 +1158,47 @@ EXPORT_SYMBOL(gpio_get_value);
 
 #else
 
-void gpio_direction_input(unsigned short gpio)
+int gpio_direction_input(unsigned gpio)
 {
         unsigned long flags;
 
-        BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+        if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+                gpio_error(gpio);
+                return -EINVAL;
+        }
 
         local_irq_save(flags);
         gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
         gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
         AWA_DUMMY_READ(inen);
         local_irq_restore(flags);
+
+        return 0;
 }
 EXPORT_SYMBOL(gpio_direction_input);
 
-void gpio_direction_output(unsigned short gpio)
+int gpio_direction_output(unsigned gpio, int value)
 {
         unsigned long flags;
 
-        BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+        if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+                gpio_error(gpio);
+                return -EINVAL;
+        }
 
         local_irq_save(flags);
         gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
+
+        if (value)
+                gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
+        else
+                gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
+
         gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
         AWA_DUMMY_READ(dir);
         local_irq_restore(flags);
+
+        return 0;
 }
 EXPORT_SYMBOL(gpio_direction_output);
 
@@ -1190,7 +1218,40 @@ void bfin_gpio_reset_spi0_ssel1(void)
 
         port_setup(gpio, GPIO_USAGE);
         gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
+        AWA_DUMMY_READ(data_set);
         udelay(1);
 }
 
 #endif /*BF548_FAMILY */
+
+#if defined(CONFIG_PROC_FS)
+static int gpio_proc_read(char *buf, char **start, off_t offset,
+                          int len, int *unused_i, void *unused_v)
+{
+        int c, outlen = 0;
+
+        for (c = 0; c < MAX_RESOURCES; c++) {
+                if (!check_gpio(c) && (reserved_gpio_map[gpio_bank(c)] & gpio_bit(c)))
+                        len = sprintf(buf, "GPIO_%d: %s \t\tGPIO %s\n", c,
+                                 get_label(c), get_gpio_dir(c) ? "OUTPUT" : "INPUT");
+                else if (reserved_peri_map[gpio_bank(c)] & gpio_bit(c))
+                        len = sprintf(buf, "GPIO_%d: %s \t\tPeripheral\n", c, get_label(c));
+                else
+                        continue;
+                buf += len;
+                outlen += len;
+        }
+        return outlen;
+}
+
+static __init int gpio_register_proc(void)
+{
+        struct proc_dir_entry *proc_gpio;
+
+        proc_gpio = create_proc_entry("gpio", S_IRUGO, NULL);
+        if (proc_gpio)
+                proc_gpio->read_proc = gpio_proc_read;
+        return proc_gpio != NULL;
+}
+__initcall(gpio_register_proc);
+#endif
diff --git a/arch/blackfin/kernel/cplb-mpu/Makefile b/arch/blackfin/kernel/cplb-mpu/Makefile
new file mode 100644
index 000000000000..286b69357f97
--- /dev/null
+++ b/arch/blackfin/kernel/cplb-mpu/Makefile
@@ -0,0 +1,8 @@
+#
+# arch/blackfin/kernel/cplb-nompu/Makefile
+#
+
+obj-y := cplbinit.o cacheinit.o cplbmgr.o
+
+obj-$(CONFIG_CPLB_INFO) += cplbinfo.o
+
diff --git a/arch/blackfin/kernel/cplb-mpu/cacheinit.c b/arch/blackfin/kernel/cplb-mpu/cacheinit.c
new file mode 100644
index 000000000000..9eecfa403187
--- /dev/null
+++ b/arch/blackfin/kernel/cplb-mpu/cacheinit.c
@@ -0,0 +1,62 @@
+/*
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/cpu.h>
+
+#include <asm/cacheflush.h>
+#include <asm/blackfin.h>
+#include <asm/cplb.h>
+#include <asm/cplbinit.h>
+
+#if defined(CONFIG_BFIN_ICACHE)
+void bfin_icache_init(void)
+{
+        unsigned long ctrl;
+        int i;
+
+        SSYNC();
+        for (i = 0; i < MAX_CPLBS; i++) {
+                bfin_write32(ICPLB_ADDR0 + i * 4, icplb_tbl[i].addr);
+                bfin_write32(ICPLB_DATA0 + i * 4, icplb_tbl[i].data);
+        }
+        ctrl = bfin_read_IMEM_CONTROL();
+        ctrl |= IMC | ENICPLB;
+        bfin_write_IMEM_CONTROL(ctrl);
+        SSYNC();
+}
+#endif
+
+#if defined(CONFIG_BFIN_DCACHE)
+void bfin_dcache_init(void)
+{
+        unsigned long ctrl;
+        int i;
+
+        SSYNC();
+        for (i = 0; i < MAX_CPLBS; i++) {
+                bfin_write32(DCPLB_ADDR0 + i * 4, dcplb_tbl[i].addr);
+                bfin_write32(DCPLB_DATA0 + i * 4, dcplb_tbl[i].data);
+        }
+
+        ctrl = bfin_read_DMEM_CONTROL();
+        ctrl |= DMEM_CNTR;
+        bfin_write_DMEM_CONTROL(ctrl);
+        SSYNC();
+}
+#endif
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinfo.c b/arch/blackfin/kernel/cplb-mpu/cplbinfo.c
new file mode 100644
index 000000000000..bd072299f7f2
--- /dev/null
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinfo.c
@@ -0,0 +1,144 @@
+/*
+ * File:         arch/blackfin/mach-common/cplbinfo.c
+ * Based on:
+ * Author:       Sonic Zhang <sonic.zhang@analog.com>
+ *
+ * Created:      Jan. 2005
+ * Description:  Display CPLB status
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+
+#include <asm/current.h>
+#include <asm/system.h>
+#include <asm/cplb.h>
+#include <asm/cplbinit.h>
+#include <asm/blackfin.h>
+
+#define CPLB_I 1
+#define CPLB_D 2
+
+#define SYNC_SYS    SSYNC()
+#define SYNC_CORE   CSYNC()
+
+#define CPLB_BIT_PAGESIZE 0x30000
+
+static char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" };
+
+static char *cplb_print_entry(char *buf, struct cplb_entry *tbl, int switched)
+{
+        int i;
+        buf += sprintf(buf, "Index\tAddress\t\tData\tSize\tU/RD\tU/WR\tS/WR\tSwitch\n");
+        for (i = 0; i < MAX_CPLBS; i++) {
+                unsigned long data = tbl[i].data;
+                unsigned long addr = tbl[i].addr;
+                if (!(data & CPLB_VALID))
+                        continue;
+
+                buf +=
+                    sprintf(buf,
+                            "%d\t0x%08lx\t%06lx\t%s\t%c\t%c\t%c\t%c\n",
+                            i, addr, data,
+                            page_size_string_table[(data & 0x30000) >> 16],
+                            (data & CPLB_USER_RD) ? 'Y' : 'N',
+                            (data & CPLB_USER_WR) ? 'Y' : 'N',
+                            (data & CPLB_SUPV_WR) ? 'Y' : 'N',
+                            i < switched ? 'N' : 'Y');
+        }
+        buf += sprintf(buf, "\n");
+
+        return buf;
+}
+
+int cplbinfo_proc_output(char *buf)
+{
+        char *p;
+
+        p = buf;
+
+        p += sprintf(p, "------------------ CPLB Information ------------------\n\n");
+
+        if (bfin_read_IMEM_CONTROL() & ENICPLB) {
+                p += sprintf(p, "Instruction CPLB entry:\n");
+                p = cplb_print_entry(p, icplb_tbl, first_switched_icplb);
+        } else
+                p += sprintf(p, "Instruction CPLB is disabled.\n\n");
+
+        if (1 || bfin_read_DMEM_CONTROL() & ENDCPLB) {
+                p += sprintf(p, "Data CPLB entry:\n");
+                p = cplb_print_entry(p, dcplb_tbl, first_switched_dcplb);
+        } else
+                p += sprintf(p, "Data CPLB is disabled.\n");
+
+        p += sprintf(p, "ICPLB miss: %d\nICPLB supervisor miss: %d\n",
+                     nr_icplb_miss, nr_icplb_supv_miss);
+        p += sprintf(p, "DCPLB miss: %d\nDCPLB protection fault:%d\n",
+                     nr_dcplb_miss, nr_dcplb_prot);
+        p += sprintf(p, "CPLB flushes: %d\n",
+                     nr_cplb_flush);
+
+        return p - buf;
+}
+
+static int cplbinfo_read_proc(char *page, char **start, off_t off,
+                              int count, int *eof, void *data)
+{
+        int len;
+
+        len = cplbinfo_proc_output(page);
+        if (len <= off + count)
+                *eof = 1;
+        *start = page + off;
+        len -= off;
+        if (len > count)
+                len = count;
+        if (len < 0)
+                len = 0;
+        return len;
+}
+
+static int __init cplbinfo_init(void)
+{
+        struct proc_dir_entry *entry;
+
+        entry = create_proc_entry("cplbinfo", 0, NULL);
+        if (!entry)
+                return -ENOMEM;
+
+        entry->read_proc = cplbinfo_read_proc;
+        entry->data = NULL;
+
+        return 0;
+}
+
+static void __exit cplbinfo_exit(void)
+{
+        remove_proc_entry("cplbinfo", NULL);
+}
+
+module_init(cplbinfo_init);
+module_exit(cplbinfo_exit);
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
new file mode 100644
index 000000000000..e2e2b5079f5b
--- /dev/null
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -0,0 +1,91 @@
+/*
+ * Blackfin CPLB initialization
+ *
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/module.h>
+
+#include <asm/blackfin.h>
+#include <asm/cplb.h>
+#include <asm/cplbinit.h>
+
+struct cplb_entry icplb_tbl[MAX_CPLBS];
+struct cplb_entry dcplb_tbl[MAX_CPLBS];
+
+int first_switched_icplb, first_switched_dcplb;
+int first_mask_dcplb;
+
+void __init generate_cpl_tables(void)
+{
+        int i_d, i_i;
+        unsigned long addr;
+        unsigned long d_data, i_data;
+        unsigned long d_cache = 0, i_cache = 0;
+
+#ifdef CONFIG_BFIN_ICACHE
+        i_cache = CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
+#endif
+
+#ifdef CONFIG_BFIN_DCACHE
+        d_cache = CPLB_L1_CHBL;
+#ifdef CONFIG_BLKFIN_WT
+        d_cache |= CPLB_L1_AOW | CPLB_WT;
+#endif
+#endif
+        i_d = i_i = 0;
+
+        /* Set up the zero page.  */
+        dcplb_tbl[i_d].addr = 0;
+        dcplb_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+
+#if 0
+        icplb_tbl[i_i].addr = 0;
+        icplb_tbl[i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB;
+#endif
+
+        /* Cover kernel memory with 4M pages.  */
+        addr = 0;
+        d_data = d_cache | CPLB_SUPV_WR | CPLB_VALID | PAGE_SIZE_4MB | CPLB_DIRTY;
+        i_data = i_cache | CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4MB;
+
+        for (; addr < memory_start; addr += 4 * 1024 * 1024) {
+                dcplb_tbl[i_d].addr = addr;
+                dcplb_tbl[i_d++].data = d_data;
+                icplb_tbl[i_i].addr = addr;
+                icplb_tbl[i_i++].data = i_data | (addr == 0 ? CPLB_USER_RD : 0);
+        }
+
+        /* Cover L1 memory.  One 4M area for code and data each is enough.  */
+#if L1_DATA_A_LENGTH > 0 || L1_DATA_B_LENGTH > 0
+        dcplb_tbl[i_d].addr = L1_DATA_A_START;
+        dcplb_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+#endif
+        icplb_tbl[i_i].addr = L1_CODE_START;
+        icplb_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
+
+        first_mask_dcplb = i_d;
+        first_switched_dcplb = i_d + (1 << page_mask_order);
+        first_switched_icplb = i_i;
+
+        while (i_d < MAX_CPLBS)
+                dcplb_tbl[i_d++].data = 0;
+        while (i_i < MAX_CPLBS)
+                icplb_tbl[i_i++].data = 0;
+}
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
new file mode 100644
index 000000000000..c426a22f9907
--- /dev/null
+++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
@@ -0,0 +1,338 @@
+/*
+ *               Blackfin CPLB exception handling.
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+
+#include <asm/blackfin.h>
+#include <asm/cplbinit.h>
+#include <asm/mmu_context.h>
+
+#ifdef CONFIG_BFIN_ICACHE
+
+#define FAULT_RW        (1 << 16)
+#define FAULT_USERSUPV  (1 << 17)
+
+int page_mask_nelts;
+int page_mask_order;
+unsigned long *current_rwx_mask;
+
+int nr_dcplb_miss, nr_icplb_miss, nr_icplb_supv_miss, nr_dcplb_prot;
+int nr_cplb_flush;
+
+static inline void disable_dcplb(void)
+{
+        unsigned long ctrl;
+        SSYNC();
+        ctrl = bfin_read_DMEM_CONTROL();
+        ctrl &= ~ENDCPLB;
+        bfin_write_DMEM_CONTROL(ctrl);
+        SSYNC();
+}
+
+static inline void enable_dcplb(void)
+{
+        unsigned long ctrl;
+        SSYNC();
+        ctrl = bfin_read_DMEM_CONTROL();
+        ctrl |= ENDCPLB;
+        bfin_write_DMEM_CONTROL(ctrl);
+        SSYNC();
+}
+
+static inline void disable_icplb(void)
+{
+        unsigned long ctrl;
+        SSYNC();
+        ctrl = bfin_read_IMEM_CONTROL();
+        ctrl &= ~ENICPLB;
+        bfin_write_IMEM_CONTROL(ctrl);
+        SSYNC();
+}
+
+static inline void enable_icplb(void)
+{
+        unsigned long ctrl;
+        SSYNC();
+        ctrl = bfin_read_IMEM_CONTROL();
+        ctrl |= ENICPLB;
+        bfin_write_IMEM_CONTROL(ctrl);
+        SSYNC();
+}
+
+/*
+ * Given the contents of the status register, return the index of the
+ * CPLB that caused the fault.
+ */
+static inline int faulting_cplb_index(int status)
+{
+        int signbits = __builtin_bfin_norm_fr1x32(status & 0xFFFF);
+        return 30 - signbits;
+}
+
+/*
+ * Given the contents of the status register and the DCPLB_DATA contents,
+ * return true if a write access should be permitted.
+ */
+static inline int write_permitted(int status, unsigned long data)
+{
+        if (status & FAULT_USERSUPV)
+                return !!(data & CPLB_SUPV_WR);
+        else
+                return !!(data & CPLB_USER_WR);
+}
+
+/* Counters to implement round-robin replacement.  */
+static int icplb_rr_index, dcplb_rr_index;
+
+/*
+ * Find an ICPLB entry to be evicted and return its index.
+ */
+static int evict_one_icplb(void)
+{
+        int i;
+        for (i = first_switched_icplb; i < MAX_CPLBS; i++)
+                if ((icplb_tbl[i].data & CPLB_VALID) == 0)
+                        return i;
+        i = first_switched_icplb + icplb_rr_index;
+        if (i >= MAX_CPLBS) {
+                i -= MAX_CPLBS - first_switched_icplb;
+                icplb_rr_index -= MAX_CPLBS - first_switched_icplb;
+        }
+        icplb_rr_index++;
+        return i;
+}
+
+static int evict_one_dcplb(void)
+{
+        int i;
+        for (i = first_switched_dcplb; i < MAX_CPLBS; i++)
+                if ((dcplb_tbl[i].data & CPLB_VALID) == 0)
+                        return i;
+        i = first_switched_dcplb + dcplb_rr_index;
+        if (i >= MAX_CPLBS) {
+                i -= MAX_CPLBS - first_switched_dcplb;
+                dcplb_rr_index -= MAX_CPLBS - first_switched_dcplb;
+        }
+        dcplb_rr_index++;
+        return i;
+}
+
+static noinline int dcplb_miss(void)
+{
+        unsigned long addr = bfin_read_DCPLB_FAULT_ADDR();
+        int status = bfin_read_DCPLB_STATUS();
+        unsigned long *mask;
+        int idx;
+        unsigned long d_data;
+
+        nr_dcplb_miss++;
+        if (addr >= _ramend)
+                return CPLB_PROT_VIOL;
+
+        d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
+#ifdef CONFIG_BFIN_DCACHE
+        d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
+#ifdef CONFIG_BLKFIN_WT
+        d_data |= CPLB_L1_AOW | CPLB_WT;
+#endif
+#endif
+        mask = current_rwx_mask;
+        if (mask) {
+                int page = addr >> PAGE_SHIFT;
+                int offs = page >> 5;
+                int bit = 1 << (page & 31);
+
+                if (mask[offs] & bit)
+                        d_data |= CPLB_USER_RD;
+
+                mask += page_mask_nelts;
+                if (mask[offs] & bit)
+                        d_data |= CPLB_USER_WR;
+        }
+
+        idx = evict_one_dcplb();
+
+        addr &= PAGE_MASK;
+        dcplb_tbl[idx].addr = addr;
+        dcplb_tbl[idx].data = d_data;
+
+        disable_dcplb();
+        bfin_write32(DCPLB_DATA0 + idx * 4, d_data);
+        bfin_write32(DCPLB_ADDR0 + idx * 4, addr);
+        enable_dcplb();
+
+        return 0;
+}
+
+static noinline int icplb_miss(void)
+{
+        unsigned long addr = bfin_read_ICPLB_FAULT_ADDR();
+        int status = bfin_read_ICPLB_STATUS();
+        int idx;
+        unsigned long i_data;
+
+        nr_icplb_miss++;
+        if (status & FAULT_USERSUPV)
+                nr_icplb_supv_miss++;
+
+        if (addr >= _ramend)
+                return CPLB_PROT_VIOL;
+
+        /*
+         * First, try to find a CPLB that matches this address.  If we
+         * find one, then the fact that we're in the miss handler means
+         * that the instruction crosses a page boundary.
+         */
+        for (idx = first_switched_icplb; idx < MAX_CPLBS; idx++) {
+                if (icplb_tbl[idx].data & CPLB_VALID) {
+                        unsigned long this_addr = icplb_tbl[idx].addr;
+                        if (this_addr <= addr && this_addr + PAGE_SIZE > addr) {
+                                addr += PAGE_SIZE;
+                                break;
+                        }
+                }
+        }
+
+        i_data = CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4KB;
+#ifdef CONFIG_BFIN_ICACHE
+        i_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
+#endif
+
+        /*
+         * Two cases to distinguish - a supervisor access must necessarily
+         * be for a module page; we grant it unconditionally (could do better
+         * here in the future).  Otherwise, check the x bitmap of the current
+         * process.
+         */
+        if (!(status & FAULT_USERSUPV)) {
+                unsigned long *mask = current_rwx_mask;
+
+                if (mask) {
+                        int page = addr >> PAGE_SHIFT;
+                        int offs = page >> 5;
+                        int bit = 1 << (page & 31);
+
+                        mask += 2 * page_mask_nelts;
+                        if (mask[offs] & bit)
+                                i_data |= CPLB_USER_RD;
+                }
+        }
+
+        idx = evict_one_icplb();
+        addr &= PAGE_MASK;
+        icplb_tbl[idx].addr = addr;
+        icplb_tbl[idx].data = i_data;
+
+        disable_icplb();
+        bfin_write32(ICPLB_DATA0 + idx * 4, i_data);
+        bfin_write32(ICPLB_ADDR0 + idx * 4, addr);
+        enable_icplb();
+
+        return 0;
+}
+
+static noinline int dcplb_protection_fault(void)
+{
+        unsigned long addr = bfin_read_DCPLB_FAULT_ADDR();
+        int status = bfin_read_DCPLB_STATUS();
+
+        nr_dcplb_prot++;
+
+        if (status & FAULT_RW) {
+                int idx = faulting_cplb_index(status);
+                unsigned long data = dcplb_tbl[idx].data;
+                if (!(data & CPLB_WT) && !(data & CPLB_DIRTY) &&
+                    write_permitted(status, data)) {
+                        data |= CPLB_DIRTY;
+                        dcplb_tbl[idx].data = data;
+                        bfin_write32(DCPLB_DATA0 + idx * 4, data);
+                        return 0;
+                }
+        }
+        return CPLB_PROT_VIOL;
+}
+
+int cplb_hdr(int seqstat, struct pt_regs *regs)
+{
+        int cause = seqstat & 0x3f;
+        switch (cause) {
+        case 0x23:
+                return dcplb_protection_fault();
+        case 0x2C:
+                return icplb_miss();
+        case 0x26:
+                return dcplb_miss();
+        default:
+            return 1;
+                panic_cplb_error(seqstat, regs);
+        }
+}
+
+void flush_switched_cplbs(void)
+{
+        int i;
+
+        nr_cplb_flush++;
+
+        disable_icplb();
+        for (i = first_switched_icplb; i < MAX_CPLBS; i++) {
+                icplb_tbl[i].data = 0;
+                bfin_write32(ICPLB_DATA0 + i * 4, 0);
+        }
+        enable_icplb();
+
+        disable_dcplb();
+        for (i = first_mask_dcplb; i < MAX_CPLBS; i++) {
+                dcplb_tbl[i].data = 0;
+                bfin_write32(DCPLB_DATA0 + i * 4, 0);
+        }
+        enable_dcplb();
+}
+
+void set_mask_dcplbs(unsigned long *masks)
+{
+        int i;
+        unsigned long addr = (unsigned long)masks;
+        unsigned long d_data;
+        current_rwx_mask = masks;
+
+        if (!masks)
+                return;
+
+        d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
+#ifdef CONFIG_BFIN_DCACHE
+        d_data |= CPLB_L1_CHBL;
+#ifdef CONFIG_BLKFIN_WT
+        d_data |= CPLB_L1_AOW | CPLB_WT;
+#endif
+#endif
+
+        disable_dcplb();
+        for (i = first_mask_dcplb; i < first_switched_dcplb; i++) {
+                dcplb_tbl[i].addr = addr;
+                dcplb_tbl[i].data = d_data;
+                bfin_write32(DCPLB_DATA0 + i * 4, d_data);
+                bfin_write32(DCPLB_ADDR0 + i * 4, addr);
+                addr += PAGE_SIZE;
+        }
+        enable_dcplb();
+}
+
+#endif
diff --git a/arch/blackfin/kernel/cplb-nompu/Makefile b/arch/blackfin/kernel/cplb-nompu/Makefile
new file mode 100644
index 000000000000..d36ea9b5382e
--- /dev/null
+++ b/arch/blackfin/kernel/cplb-nompu/Makefile
@@ -0,0 +1,8 @@
+#
+# arch/blackfin/kernel/cplb-nompu/Makefile
+#
+
+obj-y := cplbinit.o cacheinit.o cplbhdlr.o cplbmgr.o
+
+obj-$(CONFIG_CPLB_INFO) += cplbinfo.o
+
diff --git a/arch/blackfin/kernel/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c
index 62cbba7364b0..8a18399f6072 100644
--- a/arch/blackfin/kernel/cacheinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cacheinit.c
@@ -42,6 +42,7 @@ void bfin_icache_init(void)
         ctrl = bfin_read_IMEM_CONTROL();
         ctrl |= IMC | ENICPLB;
         bfin_write_IMEM_CONTROL(ctrl);
+        SSYNC();
 }
 #endif
 
@@ -63,5 +64,6 @@ void bfin_dcache_init(void)
         ctrl = bfin_read_DMEM_CONTROL();
         ctrl |= DMEM_CNTR;
         bfin_write_DMEM_CONTROL(ctrl);
+        SSYNC();
 }
 #endif
diff --git a/arch/blackfin/mach-common/cplbhdlr.S b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
index 2788532de72b..2788532de72b 100644
--- a/arch/blackfin/mach-common/cplbhdlr.S
+++ b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
diff --git a/arch/blackfin/mach-common/cplbinfo.c b/arch/blackfin/kernel/cplb-nompu/cplbinfo.c
index a4f0b428a34d..a4f0b428a34d 100644
--- a/arch/blackfin/mach-common/cplbinfo.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinfo.c
diff --git a/arch/blackfin/kernel/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 6320bc45fbba..6320bc45fbba 100644
--- a/arch/blackfin/kernel/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/kernel/cplb-nompu/cplbmgr.S
index 6f909cbfac7b..f5cf3accef37 100644
--- a/arch/blackfin/mach-common/cplbmgr.S
+++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.S
@@ -75,6 +75,15 @@ ENTRY(_cplb_mgr)
         * from the configuration table.
         */
 
+        /* A multi-word instruction can cross a page boundary. This means the
+         * first part of the instruction can be in a valid page, but the
+         * second part is not, and hence generates the instruction miss.
+         * However, the fault address is for the start of the instruction,
+         * not the part that's in the bad page. Therefore, we have to check
+         * whether the fault address applies to a page that is already present
+         * in the table.
+         */
+
         P4.L = LO(ICPLB_FAULT_ADDR);
         P4.H = HI(ICPLB_FAULT_ADDR);
 
@@ -87,7 +96,7 @@ ENTRY(_cplb_mgr)
         R4 = [P4];              /* Get faulting address*/
         R6 = 64;                /* Advance past the fault address, which*/
         R6 = R6 + R4;           /* we'll use if we find a match*/
-        R3 = ((16 << 8) | 2);   /* Extract mask, bits 16 and 17.*/
+        R3 = ((16 << 8) | 2);   /* Extract mask, two bits at posn 16 */
 
         R5 = 0;
 .Lisearch:
@@ -125,7 +134,9 @@ ENTRY(_cplb_mgr)
         P4.L = LO(IMEM_CONTROL);
         P4.H = HI(IMEM_CONTROL);
 
-        /* disable cplbs */
+        /* Turn off CPLBs while we work, necessary according to HRM before
+         * modifying CPLB descriptors
+         */
         R5 = [P4];              /* Control Register*/
         BITCLR(R5,ENICPLB_P);
         CLI R1;
@@ -179,7 +190,14 @@ ENTRY(_cplb_mgr)
         [P0 - 4] = R0;
         R0 = [P0 - 0x100];
         [P0-0x104] = R0;
-.Lie_move:P0+=4;
+.Lie_move:
+        P0+=4;
+
+        /* Clear ICPLB_DATA15, in case we don't find a replacement
+         * otherwise, we would have a duplicate entry, and will crash
+         */
+        R0 = 0;
+        [P0 - 4] = R0;
 
         /* We've made space in the ICPLB table, so that ICPLB15
          * is now free to be overwritten. Next, we have to determine
@@ -504,14 +522,23 @@ ENTRY(_cplb_mgr)
         R0 = [P0++];    /* move data */
         [P0 - 8] = R0;
         R0 = [P0-0x104] /* move address */
-.Lde_move: [P0-0x108] = R0;
+.Lde_move:
+         [P0-0x108] = R0;
+
+.Lde_moved:
+        NOP;
+
+        /* Clear DCPLB_DATA15, in case we don't find a replacement
+         * otherwise, we would have a duplicate entry, and will crash
+         */
+        R0 = 0;
+        [P0 - 0x4] = R0;
 
         /* We've now made space in DCPLB15 for the new CPLB to be
          * installed. The next stage is to locate a CPLB in the
          * config table that covers the faulting address.
          */
 
-.Lde_moved:NOP;
         R0 = I0;                /* Our faulting address */
 
         P2.L = _dpdt_table;
diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c
index 724f4a5a1d46..60f67f90fe35 100644
--- a/arch/blackfin/kernel/early_printk.c
+++ b/arch/blackfin/kernel/early_printk.c
@@ -187,7 +187,7 @@ asmlinkage void __init init_early_exception_vectors(void)
         bfin_write_EVT15(early_trap);
         CSYNC();
 
-        /* Set all the return from interupt, exception, NMI to a known place
+        /* Set all the return from interrupt, exception, NMI to a known place
          * so if we do a RETI, RETX or RETN by mistake - we go somewhere known
          * Note - don't change RETS - we are in a subroutine, or
          * RETE - since it might screw up if emulator is attached
@@ -205,7 +205,7 @@ asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr)
         if (likely(early_console == NULL))
                 setup_early_printk(DEFAULT_EARLY_PORT);
 
-        dump_bfin_mem((void *)fp->retx);
+        dump_bfin_mem(fp);
         show_regs(fp);
         dump_bfin_trace_buffer();
 
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 5bf15125f0d6..023dc80af187 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -39,9 +39,6 @@
 #include <asm/blackfin.h>
 #include <asm/fixed_code.h>
 
-#define LED_ON  0
-#define LED_OFF 1
-
 asmlinkage void ret_from_fork(void);
 
 /* Points to the SDRAM backup memory for the stack that is currently in
@@ -70,32 +67,6 @@ void (*pm_power_off)(void) = NULL;
 EXPORT_SYMBOL(pm_power_off);
 
 /*
- * We are using a different LED from the one used to indicate timer interrupt.
- */
-#if defined(CONFIG_BFIN_IDLE_LED)
-static inline void leds_switch(int flag)
-{
-        unsigned short tmp = 0;
-
-        tmp = bfin_read_CONFIG_BFIN_IDLE_LED_PORT();
-        SSYNC();
-
-        if (flag == LED_ON)
-                tmp &= ~CONFIG_BFIN_IDLE_LED_PIN;       /* light on */
-        else
-                tmp |= CONFIG_BFIN_IDLE_LED_PIN;        /* light off */
-
-        bfin_write_CONFIG_BFIN_IDLE_LED_PORT(tmp);
-        SSYNC();
-
-}
-#else
-static inline void leds_switch(int flag)
-{
-}
-#endif
-
-/*
  * The idle loop on BFIN
  */
 #ifdef CONFIG_IDLE_L1
@@ -106,12 +77,10 @@ void cpu_idle(void)__attribute__((l1_text));
 void default_idle(void)
 {
         while (!need_resched()) {
-                leds_switch(LED_OFF);
                 local_irq_disable();
                 if (likely(!need_resched()))
                         idle_with_irq_disabled();
                 local_irq_enable();
-                leds_switch(LED_ON);
         }
 }
 
@@ -327,6 +296,7 @@ void finish_atomic_sections (struct pt_regs *regs)
 }
 
 #if defined(CONFIG_ACCESS_CHECK)
+/* Return 1 if access to memory range is OK, 0 otherwise */
 int _access_ok(unsigned long addr, unsigned long size)
 {
         if (size == 0)
diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c
index ae28aac6fec1..483f93dfc1b5 100644
--- a/arch/blackfin/kernel/reboot.c
+++ b/arch/blackfin/kernel/reboot.c
@@ -19,6 +19,11 @@
 #define SYSCR_VAL       0x10
 #endif
 
+/*
+ * Delay min 5 SCLK cycles using worst case CCLK/SCLK ratio (15)
+ */
+#define SWRST_DELAY     (5 * 15)
+
 /* A system soft reset makes external memory unusable
  * so force this function into L1.
  */
@@ -34,7 +39,13 @@ void bfin_reset(void)
         while (1) {
                 /* initiate system soft reset with magic 0x7 */
                 bfin_write_SWRST(0x7);
-                asm("ssync;");
+
+                /* Wait for System reset to actually reset, needs to be 5 SCLKs, */
+                /* Assume CCLK / SCLK ratio is worst case (15), and use 5*15     */
+
+                asm("LSETUP(.Lfoo,.Lfoo) LC0 = %0\n .Lfoo: NOP;\n"
+                 : : "a" (SWRST_DELAY) : "LC0", "LT0", "LB0");
+
                 /* clear system soft reset */
                 bfin_write_SWRST(0);
                 asm("ssync;");
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index d2822010b7ce..462cae893757 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -238,7 +238,13 @@ void __init setup_arch(char **cmdline_p)
         memory_end = _ramend - DMA_UNCACHED_REGION;
 
         _ramstart = (unsigned long)__bss_stop;
+        _rambase = (unsigned long)_stext;
+#ifdef CONFIG_MPU
+        /* Round up to multiple of 4MB.  */
+        memory_start = (_ramstart + 0x3fffff) & ~0x3fffff;
+#else
         memory_start = PAGE_ALIGN(_ramstart);
+#endif
 
 #if defined(CONFIG_MTD_UCLINUX)
         /* generic memory mapped MTD driver */
@@ -307,6 +313,11 @@ void __init setup_arch(char **cmdline_p)
         printk(KERN_NOTICE "Warning: limiting memory to %liMB due to hardware anomaly 05000263\n", memory_end >> 20);
 #endif                          /* ANOMALY_05000263 */
 
+#ifdef CONFIG_MPU
+        page_mask_nelts = ((_ramend >> PAGE_SHIFT) + 31) / 32;
+        page_mask_order = get_order(3 * page_mask_nelts * sizeof(long));
+#endif
+
 #if !defined(CONFIG_MTD_UCLINUX)
         memory_end -= SIZE_4K; /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/
 #endif
@@ -315,8 +326,6 @@ void __init setup_arch(char **cmdline_p)
         init_mm.end_data = (unsigned long)_edata;
         init_mm.brk = (unsigned long)0;
 
-        init_leds();
-
         _bfin_swrst = bfin_read_SWRST();
 
         if (_bfin_swrst & RESET_DOUBLE)
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index beef057bd1dc..5bd64e341df3 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -42,75 +42,6 @@
 static void time_sched_init(irqreturn_t(*timer_routine)
                         (int, void *));
 static unsigned long gettimeoffset(void);
-static inline void do_leds(void);
-
-#if (defined(CONFIG_BFIN_ALIVE_LED) || defined(CONFIG_BFIN_IDLE_LED))
-void __init init_leds(void)
-{
-        unsigned int tmp = 0;
-
-#if defined(CONFIG_BFIN_ALIVE_LED)
-        /* config pins as output. */
-        tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_DPORT();
-        SSYNC();
-        bfin_write_CONFIG_BFIN_ALIVE_LED_DPORT(tmp | CONFIG_BFIN_ALIVE_LED_PIN);
-        SSYNC();
-
-        /*      First set led be off */
-        tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_PORT();
-        SSYNC();
-        bfin_write_CONFIG_BFIN_ALIVE_LED_PORT(tmp | CONFIG_BFIN_ALIVE_LED_PIN); /* light off */
-        SSYNC();
-#endif
-
-#if defined(CONFIG_BFIN_IDLE_LED)
-        /* config pins as output. */
-        tmp = bfin_read_CONFIG_BFIN_IDLE_LED_DPORT();
-        SSYNC();
-        bfin_write_CONFIG_BFIN_IDLE_LED_DPORT(tmp | CONFIG_BFIN_IDLE_LED_PIN);
-        SSYNC();
-
-        /*      First set led be off */
-        tmp = bfin_read_CONFIG_BFIN_IDLE_LED_PORT();
-        SSYNC();
-        bfin_write_CONFIG_BFIN_IDLE_LED_PORT(tmp | CONFIG_BFIN_IDLE_LED_PIN);   /* light off */
-        SSYNC();
-#endif
-}
-#else
-void __init init_leds(void)
-{
-}
-#endif
-
-#if defined(CONFIG_BFIN_ALIVE_LED)
-static inline void do_leds(void)
-{
-        static unsigned int count = 50;
-        static int flag;
-        unsigned short tmp = 0;
-
-        if (--count == 0) {
-                count = 50;
-                flag = ~flag;
-        }
-        tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_PORT();
-        SSYNC();
-
-        if (flag)
-                tmp &= ~CONFIG_BFIN_ALIVE_LED_PIN;      /* light on */
-        else
-                tmp |= CONFIG_BFIN_ALIVE_LED_PIN;       /* light off */
-
-        bfin_write_CONFIG_BFIN_ALIVE_LED_PORT(tmp);
-        SSYNC();
-
-}
-#else
-static inline void do_leds(void)
-{
-}
-#endif
 
 static struct irqaction bfin_timer_irq = {
         .name = "BFIN Timer Tick",
@@ -205,7 +136,6 @@ irqreturn_t timer_interrupt(int irq, void *dummy)
         write_seqlock(&xtime_lock);
 
         do_timer(1);
-        do_leds();
 
 #ifndef CONFIG_SMP
         update_process_times(user_mode(get_irq_regs()));
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 21a55ef19cbd..66b5f3e3ae2a 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -36,8 +36,10 @@
 #include <asm/cacheflush.h>
 #include <asm/blackfin.h>
 #include <asm/irq_handler.h>
+#include <linux/irq.h>
 #include <asm/trace.h>
 #include <asm/fixed_code.h>
+#include <asm/dma.h>
 
 #ifdef CONFIG_KGDB
 # include <linux/debugger.h>
@@ -170,7 +172,7 @@ asmlinkage void double_fault_c(struct pt_regs *fp)
         oops_in_progress = 1;
         printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
         dump_bfin_process(fp);
-        dump_bfin_mem((void *)fp->retx);
+        dump_bfin_mem(fp);
         show_regs(fp);
         panic("Double Fault - unrecoverable event\n");
 
@@ -195,9 +197,13 @@ asmlinkage void trap_c(struct pt_regs *fp)
          * we will kernel panic, so the system reboots.
          * If KGDB is enabled, don't set this for kernel breakpoints
         */
-        if ((bfin_read_IPEND() & 0xFFC0)
+
+        /* TODO: check to see if we are in some sort of deferred HWERR
+         * that we should be able to recover from, not kernel panic
+         */
+        if ((bfin_read_IPEND() & 0xFFC0) && (trapnr != VEC_STEP)
 #ifdef CONFIG_KGDB
-                && trapnr != VEC_EXCPT02
+                && (trapnr != VEC_EXCPT02)
 #endif
         ){
                 console_verbose();
@@ -433,6 +439,36 @@ asmlinkage void trap_c(struct pt_regs *fp)
         /* 0x3D - Reserved, Caught by default */
         /* 0x3E - Reserved, Caught by default */
         /* 0x3F - Reserved, Caught by default */
+        case VEC_HWERR:
+                info.si_code = BUS_ADRALN;
+                sig = SIGBUS;
+                switch (fp->seqstat & SEQSTAT_HWERRCAUSE) {
+                /* System MMR Error */
+                case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR):
+                        info.si_code = BUS_ADRALN;
+                        sig = SIGBUS;
+                        printk(KERN_NOTICE HWC_x2(KERN_NOTICE));
+                        break;
+                /* External Memory Addressing Error */
+                case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR):
+                        info.si_code = BUS_ADRERR;
+                        sig = SIGBUS;
+                        printk(KERN_NOTICE HWC_x3(KERN_NOTICE));
+                        break;
+                /* Performance Monitor Overflow */
+                case (SEQSTAT_HWERRCAUSE_PERF_FLOW):
+                        printk(KERN_NOTICE HWC_x12(KERN_NOTICE));
+                        break;
+                /* RAISE 5 instruction */
+                case (SEQSTAT_HWERRCAUSE_RAISE_5):
+                        printk(KERN_NOTICE HWC_x18(KERN_NOTICE));
+                        break;
+                default:        /* Reserved */
+                        printk(KERN_NOTICE HWC_default(KERN_NOTICE));
+                        break;
+                }
+                CHK_DEBUGGER_TRAP();
+                break;
         default:
                 info.si_code = TRAP_ILLTRAP;
                 sig = SIGTRAP;
@@ -447,7 +483,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
         if (sig != SIGTRAP) {
                 unsigned long stack;
                 dump_bfin_process(fp);
-                dump_bfin_mem((void *)fp->retx);
+                dump_bfin_mem(fp);
                 show_regs(fp);
 
                 /* Print out the trace buffer if it makes sense */
@@ -461,6 +497,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
                         dump_bfin_trace_buffer();
                 show_stack(current, &stack);
                 if (oops_in_progress) {
+                        print_modules();
 #ifndef CONFIG_ACCESS_CHECK
                         printk(KERN_EMERG "Please turn on "
                                "CONFIG_ACCESS_CHECK\n");
@@ -474,13 +511,6 @@ asmlinkage void trap_c(struct pt_regs *fp)
         info.si_addr = (void *)fp->pc;
         force_sig_info(sig, &info, current);
 
-        /* Ensure that bad return addresses don't end up in an infinite
-         * loop, due to speculative loads/reads. This needs to be done after
-         * the signal has been sent.
-         */
-        if (trapnr == VEC_CPLB_I_M && sig != SIGTRAP)
-                fp->pc = SAFE_USER_INSTRUCTION;
-
         trace_buffer_restore(j);
         return;
 }
@@ -616,8 +646,10 @@ void dump_bfin_process(struct pt_regs *fp)
         if (oops_in_progress)
                 printk(KERN_EMERG "Kernel OOPS in progress\n");
 
-        if (context & 0x0020)
-                printk(KERN_NOTICE "Deferred excecption or HW Error context\n");
+        if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)
+                printk(KERN_NOTICE "HW Error context\n");
+        else if (context & 0x0020)
+                printk(KERN_NOTICE "Defered Exception context\n");
         else if (context & 0x3FC0)
                 printk(KERN_NOTICE "Interrupt context\n");
         else if (context & 0x4000)
@@ -645,59 +677,124 @@ void dump_bfin_process(struct pt_regs *fp)
                      "No Valid process in current context\n");
 }
 
-void dump_bfin_mem(void *retaddr)
+void dump_bfin_mem(struct pt_regs *fp)
 {
+        unsigned short *addr, *erraddr, val = 0, err = 0;
+        char sti = 0, buf[6];
 
-        if (retaddr >= (void *)FIXED_CODE_START  && retaddr < (void *)physical_mem_end
-#if L1_CODE_LENGTH != 0
-            /* FIXME: Copy the code out of L1 Instruction SRAM through dma
-               memcpy.  */
-            && !(retaddr >= (void *)L1_CODE_START
-                 && retaddr < (void *)(L1_CODE_START + L1_CODE_LENGTH))
-#endif
-        ) {
-                int i = ((unsigned int)retaddr & 0xFFFFFFF0) - 32;
-                unsigned short x = 0;
-                printk(KERN_NOTICE "return address: [0x%p]; contents of:", retaddr);
-                for (; i < ((unsigned int)retaddr & 0xFFFFFFF0) + 32; i += 2) {
-                        if (!(i & 0xF))
-                                printk("\n" KERN_NOTICE "0x%08x: ", i);
-
-                        if (get_user(x, (unsigned short *)i))
-                                break;
+        if (unlikely((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR))
+                erraddr = (void *)fp->pc;
+        else
+                erraddr = (void *)fp->retx;
+
+        printk(KERN_NOTICE "return address: [0x%p]; contents of:", erraddr);
+
+        for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10;
+             addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
+             addr++) {
+                if (!((unsigned long)addr & 0xF))
+                        printk("\n" KERN_NOTICE "0x%p: ", addr);
+
+                if (get_user(val, addr)) {
+                        if (addr >= (unsigned short *)L1_CODE_START &&
+                            addr < (unsigned short *)(L1_CODE_START + L1_CODE_LENGTH)) {
+                                dma_memcpy(&val, addr, sizeof(val));
+                                sprintf(buf, "%04x", val);
+                        } else if (addr >= (unsigned short *)FIXED_CODE_START &&
+                                addr <= (unsigned short *)memory_start) {
+                                val = bfin_read16(addr);
+                                sprintf(buf, "%04x", val);
+                        } else {
+                                val = 0;
+                                sprintf(buf, "????");
+                        }
+                } else
+                        sprintf(buf, "%04x", val);
+
+                if (addr == erraddr) {
+                        printk("[%s]", buf);
+                        err = val;
+                } else
+                        printk(" %s ", buf);
+
+                /* Do any previous instructions turn on interrupts? */
+                if (addr <= erraddr &&                          /* in the past */
+                    ((val >= 0x0040 && val <= 0x0047) ||        /* STI instruction */
+                      val == 0x017b))                           /* [SP++] = RETI */
+                        sti = 1;
+        }
+
+        printk("\n");
+
+        /* Hardware error interrupts can be deferred */
+        if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR &&
+            oops_in_progress)){
+                printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
 #ifndef CONFIG_DEBUG_HWERR
-                        /* If one of the last few instructions was a STI
-                         * it is likely that the error occured awhile ago
-                         * and we just noticed. This only happens in kernel
-                         * context, which should mean an oops is happening
-                         */
-                        if (oops_in_progress && x >= 0x0040 && x <= 0x0047 && i <= 0)
-                                panic("\n\nWARNING : You should reconfigure"
-                                        " the kernel to turn on\n"
-                                        " 'Hardware error interrupt"
-                                        " debugging'\n"
-                                        " The rest of this error"
-                                        " is meanless\n");
-#endif
-                        if (i == (unsigned int)retaddr)
-                                printk("[%04x]", x);
-                        else
-                                printk(" %04x ", x);
+                printk(KERN_NOTICE "The remaining message may be meaningless\n"
+                        KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a"
+                         " better idea where it came from\n");
+#else
+                /* If we are handling only one peripheral interrupt
+                 * and current mm and pid are valid, and the last error
+                 * was in that user space process's text area
+                 * print it out - because that is where the problem exists
+                 */
+                if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) &&
+                     (current->pid && current->mm)) {
+                        /* And the last RETI points to the current userspace context */
+                        if ((fp + 1)->pc >= current->mm->start_code &&
+                            (fp + 1)->pc <= current->mm->end_code) {
+                                printk(KERN_NOTICE "It might be better to look around here : \n");
+                                printk(KERN_NOTICE "-------------------------------------------\n");
+                                show_regs(fp + 1);
+                                printk(KERN_NOTICE "-------------------------------------------\n");
+                        }
                 }
-                printk("\n");
-        } else
-                printk("\n" KERN_NOTICE
-                        "Cannot look at the [PC] <%p> for it is"
-                        " in unreadable memory - sorry\n", retaddr);
+#endif
+        }
 }
 
 void show_regs(struct pt_regs *fp)
 {
         char buf [150];
+        struct irqaction *action;
+        unsigned int i;
+        unsigned long flags;
 
-        printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\n");
+        printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
         printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
                 (long)fp->seqstat, fp->ipend, fp->syscfg);
+        printk(KERN_NOTICE "  HWERRCAUSE: 0x%lx\n",
+                (fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
+        printk(KERN_NOTICE "  EXCAUSE   : 0x%lx\n",
+                fp->seqstat & SEQSTAT_EXCAUSE);
+        for (i = 6; i <= 15 ; i++) {
+                if (fp->ipend & (1 << i)) {
+                        decode_address(buf, bfin_read32(EVT0 + 4*i));
+                        printk(KERN_NOTICE "  physical IVG%i asserted : %s\n", i, buf);
+                }
+        }
+
+        /* if no interrupts are going off, don't print this out */
+        if (fp->ipend & ~0x3F) {
+                for (i = 0; i < (NR_IRQS - 1); i++) {
+                        spin_lock_irqsave(&irq_desc[i].lock, flags);
+                        action = irq_desc[i].action;
+                        if (!action)
+                                goto unlock;
+
+                        decode_address(buf, (unsigned int)action->handler);
+                        printk(KERN_NOTICE "  logical irq %3d mapped  : %s", i, buf);
+                        for (action = action->next; action; action = action->next) {
+                                decode_address(buf, (unsigned int)action->handler);
+                                printk(", %s", buf);
+                        }
+                        printk("\n");
+unlock:
+                        spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+                }
+        }
 
         decode_address(buf, fp->rete);
         printk(KERN_NOTICE " RETE: %s\n", buf);
@@ -708,9 +805,10 @@ void show_regs(struct pt_regs *fp)
         decode_address(buf, fp->rets);
         printk(KERN_NOTICE " RETS: %s\n", buf);
         decode_address(buf, fp->pc);
-        printk(KERN_NOTICE " PC: %s\n", buf);
+        printk(KERN_NOTICE " PC  : %s\n", buf);
 
-        if ((long)fp->seqstat & SEQSTAT_EXCAUSE) {
+        if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) &&
+            (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) {
                 decode_address(buf, bfin_read_DCPLB_FAULT_ADDR());
                 printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf);
                 decode_address(buf, bfin_read_ICPLB_FAULT_ADDR());
@@ -824,7 +922,7 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
         printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void *)bfin_read_DCPLB_FAULT_ADDR());
         printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void *)bfin_read_ICPLB_FAULT_ADDR());
         dump_bfin_process(fp);
-        dump_bfin_mem((void *)fp->retx);
+        dump_bfin_mem(fp);
         show_regs(fp);
         dump_stack();
         panic("Unrecoverable event\n");
diff --git a/arch/blackfin/lib/memcpy.S b/arch/blackfin/lib/memcpy.S
index 2e6336492b4b..e654a18a0754 100644
--- a/arch/blackfin/lib/memcpy.S
+++ b/arch/blackfin/lib/memcpy.S
@@ -70,8 +70,8 @@ ENTRY(_memcpy)
         /* Check for aligned data.*/
 
         R3 = R1 | R0;
-        R0 = 0x3;
-        R3 = R3 & R0;
+        R1 = 0x3;
+        R3 = R3 & R1;
         CC = R3;        /* low bits set on either address? */
         IF CC JUMP .Lnot_aligned;
 
@@ -83,7 +83,6 @@ ENTRY(_memcpy)
         /* less than eight bytes... */
         P2 = R2;
         LSETUP(.Lthree_start, .Lthree_end) LC0=P2;
-        R0 = R1;        /* setup src address for return */
 .Lthree_start:
         R3 = B[P1++] (X);
 .Lthree_end:
@@ -95,7 +94,6 @@ ENTRY(_memcpy)
         /* There's at least eight bytes to copy. */
         P2 += -1;       /* because we unroll one iteration */
         LSETUP(.Lword_loops, .Lword_loope) LC0=P2;
-        R0 = R1;
         I1 = P1;
         R3 = [I1++];
 #if ANOMALY_05000202
@@ -120,7 +118,6 @@ ENTRY(_memcpy)
 .Lnot_aligned:
         /* From here, we're copying byte-by-byte. */
         LSETUP (.Lbyte_start, .Lbyte_end) LC0=P2;
-        R0 = R1;        /* Save src address for return */
 .Lbyte_start:
         R1 = B[P1++] (X);
 .Lbyte_end:
@@ -135,7 +132,6 @@ ENTRY(_memcpy)
          * Don't bother to work out alignment for
          * the reverse case.
          */
-        R0 = R1;        /* save src for later. */
         P0 = P0 + P2;
         P0 += -1;
         P1 = P1 + P2;
diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig
index 5c736837d4bf..3cde4beeb214 100644
--- a/arch/blackfin/mach-bf527/Kconfig
+++ b/arch/blackfin/mach-bf527/Kconfig
@@ -43,7 +43,7 @@ endchoice
 
 choice
         prompt "UART1"
-        default BF527_UART1_PORTG
+        default BF527_UART1_PORTF
         help
           Select PORT used for UART1. See Hardware Reference Manual
 
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 003e2ac654d8..f8c411a24af7 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -8,7 +8,7 @@
  *
  * Modified:
  *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2007 Analog Devices Inc.
+ *               Copyright 2004-2008 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
@@ -41,6 +41,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/sl811.h>
+#include <linux/usb/musb.h>
 #include <asm/cplb.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -105,6 +106,69 @@ void __exit bfin_isp1761_exit(void)
 arch_initcall(bfin_isp1761_init);
 #endif
 
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+static struct resource musb_resources[] = {
+        [0] = {
+                .start  = 0xffc03800,
+                .end    = 0xffc03cff,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = { /* general IRQ */
+                .start  = IRQ_USB_INT0,
+                .end    = IRQ_USB_INT0,
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+        },
+        [2] = { /* DMA IRQ */
+                .start  = IRQ_USB_DMA,
+                .end    = IRQ_USB_DMA,
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+        },
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_OTG)
+        .mode           = MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+        .mode           = MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+        .mode           = MUSB_PERIPHERAL,
+#endif
+        .multipoint     = 0,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+        .name           = "musb_hdrc",
+        .id             = 0,
+        .dev = {
+                .dma_mask               = &musb_dmamask,
+                .coherent_dma_mask      = 0xffffffff,
+                .platform_data          = &musb_plat,
+        },
+        .num_resources  = ARRAY_SIZE(musb_resources),
+        .resource       = musb_resources,
+};
+#endif
+
+#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
+
+static struct resource bf52x_t350mcqb_resources[] = {
+        {
+                .start = IRQ_PPI_ERROR,
+                .end = IRQ_PPI_ERROR,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bf52x_t350mcqb_device = {
+        .name           = "bfin-t350mcqb",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(bf52x_t350mcqb_resources),
+        .resource       = bf52x_t350mcqb_resources,
+};
+#endif
+
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
         {
@@ -253,12 +317,7 @@ static struct resource sl811_hcd_resources[] = {
 void sl811_port_power(struct device *dev, int is_on)
 {
         gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-        gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
-
-        if (is_on)
-                gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
-        else
-                gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
+        gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
 }
 #endif
 
@@ -718,6 +777,28 @@ static struct platform_device bfin_pata_device = {
 };
 #endif
 
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+        {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
+        {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+        .buttons        = bfin_gpio_keys_table,
+        .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+        .name      = "gpio-keys",
+        .dev = {
+                .platform_data = &bfin_gpio_keys_data,
+        },
+};
+#endif
+
 static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
         &bf5xx_nand_device,
@@ -739,6 +820,10 @@ static struct platform_device *stamp_devices[] __initdata = {
         &isp1362_hcd_device,
 #endif
 
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+        &musb_device,
+#endif
+
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
         &smc91x_device,
 #endif
@@ -763,6 +848,10 @@ static struct platform_device *stamp_devices[] __initdata = {
         &bfin_fb_device,
 #endif
 
+#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
+        &bf52x_t350mcqb_device,
+#endif
+
 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
         &bfin_fb_adv7393_device,
 #endif
@@ -783,6 +872,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
         &bfin_pata_device,
 #endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+        &bfin_device_gpiokeys,
+#endif
 };
 
 static int __init stamp_init(void)
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 6bcf4047f89c..a72c7a620fa1 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -40,6 +40,7 @@
 #endif
 #include <linux/pata_platform.h>
 #include <linux/irq.h>
+
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
@@ -303,7 +304,77 @@ static struct platform_device bfin_uart_device = {
 };
 #endif
 
-static struct platform_device *stamp_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+
+#include <linux/serial_8250.h>
+#include <linux/serial.h>
+
+/*
+ * Configuration for two 16550 UARTS in FPGA at addresses 0x20200000 and 0x202000010.
+ * running at half system clock, both with interrupt output or-ed to PF8. Change to
+ * suit different FPGA configuration, or to suit real 16550 UARTS connected to the bus
+ */
+
+static struct plat_serial8250_port serial8250_platform_data [] = {
+        {
+                .membase = 0x20200000,
+                .mapbase = 0x20200000,
+                .irq = IRQ_PF8,
+                .flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
+                .iotype = UPIO_MEM,
+                .regshift = 1,
+                .uartclk = 66666667,
+        }, {
+                .membase = 0x20200010,
+                .mapbase = 0x20200010,
+                .irq = IRQ_PF8,
+                .flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
+                .iotype = UPIO_MEM,
+                .regshift = 1,
+                .uartclk = 66666667,
+        }, {
+        }
+};
+
+static struct platform_device serial8250_device = {
+        .id             = PLAT8250_DEV_PLATFORM,
+        .name           = "serial8250",
+        .dev            = {
+                .platform_data = serial8250_platform_data,
+        },
+};
+
+#endif
+
+#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE)
+
+/*
+ * Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030,
+ * interrupt output wired to PF9. Change to suit different FPGA configuration
+ */
+
+static struct resource opencores_kbd_resources[] = {
+        [0] = {
+                .start  = 0x20200030,
+                .end    = 0x20300030 + 2,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_PF9,
+                .end    = IRQ_PF9,
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+        },
+};
+
+static struct platform_device opencores_kbd_device = {
+        .id             = -1,
+        .name           = "opencores-kbd",
+        .resource       = opencores_kbd_resources,
+        .num_resources  = ARRAY_SIZE(opencores_kbd_resources),
+};
+#endif
+
+static struct platform_device *h8606_devices[] __initdata = {
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
         &rtc_device,
 #endif
@@ -327,13 +398,21 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
         &bfin_uart_device,
 #endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+        &serial8250_device,
+#endif
+
+#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE)
+        &opencores_kbd_device,
+#endif
 };
 
 static int __init H8606_init(void)
 {
         printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n");
         printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
-        platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+        platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices));
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index be852034a68b..c37dd45c8803 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -256,6 +256,50 @@ static struct platform_device bfin_pata_device = {
 };
 #endif
 
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+        {BTN_0, GPIO_PF7, 1, "gpio-keys: BTN0"},
+        {BTN_1, GPIO_PF8, 1, "gpio-keys: BTN1"},
+        {BTN_2, GPIO_PF9, 1, "gpio-keys: BTN2"},
+        {BTN_3, GPIO_PF10, 1, "gpio-keys: BTN3"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+        .buttons        = bfin_gpio_keys_table,
+        .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+        .name      = "gpio-keys",
+        .dev = {
+                .platform_data = &bfin_gpio_keys_data,
+        },
+};
+#endif
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#include <linux/i2c-gpio.h>
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+        .sda_pin                = 1,
+        .scl_pin                = 0,
+        .sda_is_open_drain      = 0,
+        .scl_is_open_drain      = 0,
+        .udelay                 = 40,
+};
+
+static struct platform_device i2c_gpio_device = {
+        .name           = "i2c-gpio",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &i2c_gpio_data,
+        },
+};
+#endif
+
 static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
         &smc91x_device,
@@ -280,6 +324,14 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
         &bfin_pata_device,
 #endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+        &bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+        &i2c_gpio_device,
+#endif
 };
 
 static int __init ezkit_init(void)
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 8fde8d832850..ac52b040b336 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -32,6 +32,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
@@ -108,6 +109,50 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
+static struct mtd_partition stamp_partitions[] = {
+        {
+                .name   = "Bootloader",
+                .size   = 0x20000,
+                .offset = 0,
+        }, {
+                .name   = "Kernel",
+                .size   = 0xE0000,
+                .offset = MTDPART_OFS_APPEND,
+        }, {
+                .name   = "RootFS",
+                .size   = MTDPART_SIZ_FULL,
+                .offset = MTDPART_OFS_APPEND,
+        }
+};
+
+static struct physmap_flash_data stamp_flash_data = {
+        .width    = 2,
+        .parts    = stamp_partitions,
+        .nr_parts = ARRAY_SIZE(stamp_partitions),
+};
+
+static struct resource stamp_flash_resource[] = {
+        {
+                .name  = "cfi_probe",
+                .start = 0x20000000,
+                .end   = 0x203fffff,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = CONFIG_ENET_FLASH_PIN,
+                .flags = IORESOURCE_IRQ,
+        }
+};
+
+static struct platform_device stamp_flash_device = {
+        .name          = "BF5xx-Flash",
+        .id            = 0,
+        .dev = {
+                .platform_data = &stamp_flash_data,
+        },
+        .num_resources = ARRAY_SIZE(stamp_flash_resource),
+        .resource      = stamp_flash_resource,
+};
+
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* all SPI peripherals info goes here */
 
@@ -373,6 +418,49 @@ static struct platform_device bfin_pata_device = {
 };
 #endif
 
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+        {BTN_0, GPIO_PF5, 1, "gpio-keys: BTN0"},
+        {BTN_1, GPIO_PF6, 1, "gpio-keys: BTN1"},
+        {BTN_2, GPIO_PF8, 1, "gpio-keys: BTN2"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+        .buttons        = bfin_gpio_keys_table,
+        .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+        .name      = "gpio-keys",
+        .dev = {
+                .platform_data = &bfin_gpio_keys_data,
+        },
+};
+#endif
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#include <linux/i2c-gpio.h>
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+        .sda_pin                = 2,
+        .scl_pin                = 3,
+        .sda_is_open_drain      = 0,
+        .scl_is_open_drain      = 0,
+        .udelay                 = 40,
+};
+
+static struct platform_device i2c_gpio_device = {
+        .name           = "i2c-gpio",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &i2c_gpio_data,
+        },
+};
+#endif
+
 static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
         &rtc_device,
@@ -406,6 +494,15 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
         &bfin_pata_device,
 #endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+        &bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+        &i2c_gpio_device,
+#endif
+        &stamp_flash_device,
 };
 
 static int __init stamp_init(void)
@@ -418,12 +515,10 @@ static int __init stamp_init(void)
                 return ret;
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-# if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
         /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
         bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (1 << CONFIG_ENET_FLASH_PIN));
         bfin_write_FIO_FLAG_S(1 << CONFIG_ENET_FLASH_PIN);
         SSYNC();
-# endif
 #endif
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
@@ -440,10 +535,8 @@ arch_initcall(stamp_init);
 
 void native_machine_restart(char *cmd)
 {
-#if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
-# define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN)
+#define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN)
         bfin_write_FIO_INEN(~BIT_TO_SET);
         bfin_write_FIO_DIR(BIT_TO_SET);
         bfin_write_FIO_FLAG_C(BIT_TO_SET);
-#endif
 }
diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig
index 96a15196e416..7e789dbef036 100644
--- a/arch/blackfin/mach-bf537/boards/Kconfig
+++ b/arch/blackfin/mach-bf537/boards/Kconfig
@@ -21,6 +21,12 @@ config PNAV10
         help
           PNAV board support.
 
+config CAMSIG_MINOTAUR
+        bool "Cambridge Signal Processing LTD Minotaur"
+        depends on (BF537)
+        help
+          Board supply package for CSP Minotaur
+
 config GENERIC_BF537_BOARD
         bool "Generic"
         help
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index 94a85174283a..87e450f29e37 100644
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_GENERIC_BF537_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN537_STAMP)            += stamp.o led.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
 obj-$(CONFIG_PNAV10)                   += pnav10.o
+obj-$(CONFIG_CAMSIG_MINOTAUR)          += minotaur.o
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index c0fb06dbc42e..8703b67d5ec6 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -29,6 +29,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/etherdevice.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -216,6 +217,12 @@ static struct platform_device rtc_device = {
 };
 #endif
 
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+static struct platform_device hitachi_fb_device = {
+        .name = "hitachi-tx09",
+};
+#endif
+
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 static struct resource smc91x_resources[] = {
         {
@@ -374,6 +381,10 @@ static struct platform_device bfin_pata_device = {
 #endif
 
 static struct platform_device *cm_bf537_devices[] __initdata = {
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+        &hitachi_fb_device,
+#endif
+
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
         &rtc_device,
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 09f4bfbd2350..3e52f3f5bd58 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -8,7 +8,7 @@
  *
  * Modified:
  *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2007 Analog Devices Inc.
+ *               Copyright 2004-2008 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
@@ -29,6 +29,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/etherdevice.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -204,12 +205,8 @@ static struct resource sl811_hcd_resources[] = {
 void sl811_port_power(struct device *dev, int is_on)
 {
         gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-        gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
+        gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
 
-        if (is_on)
-                gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
-        else
-                gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
 }
 #endif
 
@@ -733,9 +730,11 @@ void native_machine_restart(char *cmd)
                 bfin_gpio_reset_spi0_ssel1();
 }
 
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 void bfin_get_ether_addr(char *addr)
 {
         random_ether_addr(addr);
         printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
 }
 EXPORT_SYMBOL(bfin_get_ether_addr);
+#endif
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
new file mode 100644
index 000000000000..b8bbba85af53
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -0,0 +1,317 @@
+/*
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb_isp1362.h>
+#endif
+#include <linux/pata_platform.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb_sl811.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "CamSig Minotaur BF537";
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+static struct resource bfin_pcmcia_cf_resources[] = {
+        {
+                .start = 0x20310000, /* IO PORT */
+                .end = 0x20312000,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = 0x20311000, /* Attribute Memory */
+                .end = 0x20311FFF,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = IRQ_PF4,
+                .end = IRQ_PF4,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+        }, {
+                .start = IRQ_PF6, /* Card Detect PF6 */
+                .end = IRQ_PF6,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_pcmcia_cf_device = {
+        .name = "bfin_cf_pcmcia",
+        .id = -1,
+        .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
+        .resource = bfin_pcmcia_cf_resources,
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+        .name = "rtc-bfin",
+        .id   = -1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+        .name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+        {
+                .start = 0x20300000,
+                .end = 0x20300000 + 0x100,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = IRQ_PF7,
+                .end = IRQ_PF7,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+        },
+};
+
+static struct platform_device net2272_bfin_device = {
+        .name = "net2272",
+        .id = -1,
+        .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+        .resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) \
+        || defined(CONFIG_MTD_M25P80_MODULE)
+
+/* Partition sizes */
+#define FLASH_SIZE       0x00400000
+#define PSIZE_UBOOT      0x00030000
+#define PSIZE_INITRAMFS  0x00240000
+
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+        {
+                .name       = "uboot",
+                .size       = PSIZE_UBOOT,
+                .offset     = 0x000000,
+                .mask_flags = MTD_CAP_ROM
+        }, {
+                .name       = "initramfs",
+                .size       = PSIZE_INITRAMFS,
+                .offset     = PSIZE_UBOOT
+        }, {
+                .name       = "opt",
+                .size       = FLASH_SIZE - (PSIZE_UBOOT + PSIZE_INITRAMFS),
+                .offset     = PSIZE_UBOOT + PSIZE_INITRAMFS,
+        }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+        .name = "m25p80",
+        .parts = bfin_spi_flash_partitions,
+        .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+        .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+        .enable_dma = 0,         /* use dma transfer with this chip*/
+        .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+        .enable_dma = 1,
+        .bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+        || defined(CONFIG_MTD_M25P80_MODULE)
+        {
+                /* the modalias must be the same as spi device driver name */
+                .modalias = "m25p80", /* Name of spi_driver for this device */
+                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0, /* Framework bus number */
+                .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+                .platform_data = &bfin_spi_flash_data,
+                .controller_data = &spi_flash_chip_info,
+                .mode = SPI_MODE_3,
+        },
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+        {
+                .modalias = "spi_mmc_dummy",
+                .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = 0,
+                .platform_data = NULL,
+                .controller_data = &spi_mmc_chip_info,
+                .mode = SPI_MODE_3,
+        },
+        {
+                .modalias = "spi_mmc",
+                .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+                .platform_data = NULL,
+                .controller_data = &spi_mmc_chip_info,
+                .mode = SPI_MODE_3,
+        },
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+        .num_chipselect = 8,
+        .enable_dma = 1,  /* master has the ability to do dma transfer */
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+        [0] = {
+                .start = SPI0_REGBASE,
+                .end   = SPI0_REGBASE + 0xFF,
+                .flags = IORESOURCE_MEM,
+                },
+        [1] = {
+                .start = CH_SPI,
+                .end   = CH_SPI,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_spi0_device = {
+        .name = "bfin-spi",
+        .id = 0, /* Bus number */
+        .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+        .resource = bfin_spi0_resource,
+        .dev = {
+                .platform_data = &bfin_spi0_info, /* Passed to driver */
+        },
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+        {
+                .start = 0xFFC00400,
+                .end = 0xFFC004FF,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = 0xFFC02000,
+                .end = 0xFFC020FF,
+                .flags = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device bfin_uart_device = {
+        .name = "bfin-uart",
+        .id = 1,
+        .num_resources = ARRAY_SIZE(bfin_uart_resources),
+        .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+        [0] = {
+                .start = TWI0_REGBASE,
+                .end   = TWI0_REGBASE + 0xFF,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = IRQ_TWI,
+                .end   = IRQ_TWI,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+        .name = "i2c-bfin-twi",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+        .resource = bfin_twi0_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+        .name = "bfin-sport-uart",
+        .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+        .name = "bfin-sport-uart",
+        .id = 1,
+};
+#endif
+
+static struct platform_device *minotaur_devices[] __initdata = {
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+        &bfin_pcmcia_cf_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+        &rtc_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+        &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+        &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+        &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+        &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+        &i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+        &bfin_sport0_uart_device,
+        &bfin_sport1_uart_device,
+#endif
+
+};
+
+static int __init minotaur_init(void)
+{
+        printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+        platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+        spi_register_board_info(bfin_spi_board_info,
+                                ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+        return 0;
+}
+
+arch_initcall(minotaur_init);
+
+void native_machine_restart(char *cmd)
+{
+        /* workaround reboot hang when booting from SPI */
+        if ((bfin_read_SYSCR() & 0x7) == 0x3)
+                bfin_gpio_reset_spi0_ssel1();
+}
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index fd5f4a6f08e4..509a8a236fd0 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -8,7 +8,7 @@
  *
  * Modified:
  *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
+ *               Copyright 2004-2008 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
@@ -29,6 +29,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/etherdevice.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -133,12 +134,8 @@ static struct resource sl811_hcd_resources[] = {
 void sl811_port_power(struct device *dev, int is_on)
 {
         gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-        gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
+        gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
 
-        if (is_on)
-                gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
-        else
-                gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
 }
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 07b0dc273d2f..772541548b76 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -32,6 +32,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
@@ -103,6 +104,30 @@ void __exit bfin_isp1761_exit(void)
 arch_initcall(bfin_isp1761_init);
 #endif
 
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+        {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"},
+        {BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"},
+        {BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"},
+        {BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+        .buttons        = bfin_gpio_keys_table,
+        .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+        .name      = "gpio-keys",
+        .dev = {
+                .platform_data = &bfin_gpio_keys_data,
+        },
+};
+#endif
+
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 static struct resource bfin_pcmcia_cf_resources[] = {
         {
@@ -226,12 +251,7 @@ static struct resource sl811_hcd_resources[] = {
 void sl811_port_power(struct device *dev, int is_on)
 {
         gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-        gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
-
-        if (is_on)
-                gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
-        else
-                gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
+        gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
 }
 #endif
 
@@ -320,6 +340,49 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
+static struct mtd_partition stamp_partitions[] = {
+        {
+                .name       = "Bootloader",
+                .size       = 0x20000,
+                .offset     = 0,
+        }, {
+                .name       = "Kernel",
+                .size       = 0xE0000,
+                .offset     = MTDPART_OFS_APPEND,
+        }, {
+                .name       = "RootFS",
+                .size       = 0x400000 - 0x20000 - 0xE0000 - 0x10000,
+                .offset     = MTDPART_OFS_APPEND,
+        }, {
+                .name       = "MAC Address",
+                .size       = MTDPART_SIZ_FULL,
+                .offset     = 0x3F0000,
+                .mask_flags = MTD_WRITEABLE,
+        }
+};
+
+static struct physmap_flash_data stamp_flash_data = {
+        .width      = 2,
+        .parts      = stamp_partitions,
+        .nr_parts   = ARRAY_SIZE(stamp_partitions),
+};
+
+static struct resource stamp_flash_resource = {
+        .start = 0x20000000,
+        .end   = 0x203fffff,
+        .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device stamp_flash_device = {
+        .name          = "physmap-flash",
+        .id            = 0,
+        .dev = {
+                .platform_data = &stamp_flash_data,
+        },
+        .num_resources = 1,
+        .resource      = &stamp_flash_resource,
+};
+
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* all SPI peripherals info goes here */
 
@@ -738,6 +801,11 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
         &bfin_pata_device,
 #endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+        &bfin_device_gpiokeys,
+#endif
+        &stamp_flash_device,
 };
 
 static int __init stamp_init(void)
diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig
index d8bd3b49f150..1bfcd8f646ab 100644
--- a/arch/blackfin/mach-bf548/Kconfig
+++ b/arch/blackfin/mach-bf548/Kconfig
@@ -7,7 +7,7 @@ menu "BF548 Specific Configuration"
 config DEB_DMA_URGENT
         bool "DMA has priority over core for ext. accesses"
         depends on BF54x
-        default n
+        default y
         help
           Treat any DEB1, DEB2 and DEB3 request as Urgent
 
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index d37d6653c4bc..14860f04d1bd 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -32,6 +32,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/irq.h>
@@ -206,23 +207,6 @@ static struct platform_device smsc911x_device = {
 };
 #endif
 
-#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE)
-static struct resource bf54x_hcd_resources[] = {
-        {
-                .start = 0xFFC03C00,
-                .end = 0xFFC040FF,
-                .flags = IORESOURCE_MEM,
-        },
-};
-
-static struct platform_device bf54x_hcd = {
-        .name = "bf54x-hcd",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(bf54x_hcd_resources),
-        .resource = bf54x_hcd_resources,
-};
-#endif
-
 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 static struct resource musb_resources[] = {
         [0] = {
@@ -243,14 +227,14 @@ static struct resource musb_resources[] = {
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
-#ifdef CONFIG_USB_MUSB_OTG
+#if defined(CONFIG_USB_MUSB_OTG)
         .mode           = MUSB_OTG,
-#elif CONFIG_USB_MUSB_HDRC_HCD
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
         .mode           = MUSB_HOST,
-#elif CONFIG_USB_GADGET_MUSB_HDRC
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
         .mode           = MUSB_PERIPHERAL,
 #endif
-        .multipoint     = 1,
+        .multipoint     = 0,
 };
 
 static u64 musb_dmamask = ~(u32)0;
@@ -344,6 +328,44 @@ static struct platform_device bf54x_sdh_device = {
 };
 #endif
 
+static struct mtd_partition ezkit_partitions[] = {
+        {
+                .name       = "Bootloader",
+                .size       = 0x20000,
+                .offset     = 0,
+        }, {
+                .name       = "Kernel",
+                .size       = 0xE0000,
+                .offset     = MTDPART_OFS_APPEND,
+        }, {
+                .name       = "RootFS",
+                .size       = MTDPART_SIZ_FULL,
+                .offset     = MTDPART_OFS_APPEND,
+        }
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+        .width      = 2,
+        .parts      = ezkit_partitions,
+        .nr_parts   = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+        .start = 0x20000000,
+        .end   = 0x20ffffff,
+        .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+        .name          = "physmap-flash",
+        .id            = 0,
+        .dev = {
+                .platform_data = &ezkit_flash_data,
+        },
+        .num_resources = 1,
+        .resource      = &ezkit_flash_resource,
+};
+
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* all SPI peripherals info goes here */
 #if defined(CONFIG_MTD_M25P80) \
@@ -531,6 +553,29 @@ static struct platform_device i2c_bfin_twi1_device = {
 #endif
 #endif
 
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+        {BTN_0, GPIO_PB8, 1, "gpio-keys: BTN0"},
+        {BTN_1, GPIO_PB9, 1, "gpio-keys: BTN1"},
+        {BTN_2, GPIO_PB10, 1, "gpio-keys: BTN2"},
+        {BTN_3, GPIO_PB11, 1, "gpio-keys: BTN3"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+        .buttons        = bfin_gpio_keys_table,
+        .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+        .name      = "gpio-keys",
+        .dev = {
+                .platform_data = &bfin_gpio_keys_data,
+        },
+};
+#endif
+
 static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
         &rtc_device,
@@ -548,10 +593,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
         &smsc911x_device,
 #endif
 
-#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE)
-        &bf54x_hcd,
-#endif
-
 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
         &musb_device,
 #endif
@@ -583,6 +624,11 @@ static struct platform_device *ezkit_devices[] __initdata = {
         &i2c_bfin_twi1_device,
 #endif
 #endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+        &bfin_device_gpiokeys,
+#endif
+        &ezkit_flash_device,
 };
 
 static int __init stamp_init(void)
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index 74b34c7f3629..74fe258421a5 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -298,8 +298,8 @@ ENTRY(_start_dma_code)
         w[p0] = r0.l;
         ssync;
 
-        p0.h = hi(SIC_IWR);
-        p0.l = lo(SIC_IWR);
+        p0.h = hi(SIC_IWR0);
+        p0.l = lo(SIC_IWR0);
         r0.l = 0x1;
         r0.h = 0x0;
         [p0] = r0;
@@ -324,12 +324,25 @@ ENTRY(_start_dma_code)
         w[p0] = r0.l;
         ssync;
 
+#if defined(CONFIG_BF54x)
+        P2.H = hi(EBIU_RSTCTL);
+        P2.L = lo(EBIU_RSTCTL);
+        R0 = [P2];
+        BITSET (R0, 3);
+#else
         P2.H = hi(EBIU_SDGCTL);
         P2.L = lo(EBIU_SDGCTL);
         R0 = [P2];
         BITSET (R0, 24);
+#endif
         [P2] = R0;
         SSYNC;
+#if defined(CONFIG_BF54x)
+.LSRR_MODE:
+        R0 = [P2];
+        CC = BITTST(R0, 4);
+        if !CC JUMP .LSRR_MODE;
+#endif
 
         r0 = CONFIG_VCO_MULT & 63;       /* Load the VCO multiplier         */
         r0 = r0 << 9;                    /* Shift it over,                  */
@@ -361,6 +374,39 @@ ENTRY(_start_dma_code)
         w[p0] = r0.l;
         ssync;
 
+#if defined(CONFIG_BF54x)
+        P2.H = hi(EBIU_RSTCTL);
+        P2.L = lo(EBIU_RSTCTL);
+        R0 = [P2];
+        CC = BITTST(R0, 0);
+        if CC jump .Lskipddrrst;
+        BITSET (R0, 0);
+.Lskipddrrst:
+        BITCLR (R0, 3);
+        [P2] = R0;
+        SSYNC;
+
+        p0.l = lo(EBIU_DDRCTL0);
+        p0.h = hi(EBIU_DDRCTL0);
+        r0.l = lo(mem_DDRCTL0);
+        r0.h = hi(mem_DDRCTL0);
+        [p0] = r0;
+        ssync;
+
+        p0.l = lo(EBIU_DDRCTL1);
+        p0.h = hi(EBIU_DDRCTL1);
+        r0.l = lo(mem_DDRCTL1);
+        r0.h = hi(mem_DDRCTL1);
+        [p0] = r0;
+        ssync;
+
+        p0.l = lo(EBIU_DDRCTL2);
+        p0.h = hi(EBIU_DDRCTL2);
+        r0.l = lo(mem_DDRCTL2);
+        r0.h = hi(mem_DDRCTL2);
+        [p0] = r0;
+        ssync;
+#else
         p0.l = lo(EBIU_SDRRC);
         p0.h = hi(EBIU_SDRRC);
         r0 = mem_SDRRC;
@@ -394,9 +440,10 @@ ENTRY(_start_dma_code)
         R1 = R1 | R0;
         [P2] = R1;
         SSYNC;
+#endif
 
-        p0.h = hi(SIC_IWR);
-        p0.l = lo(SIC_IWR);
+        p0.h = hi(SIC_IWR0);
+        p0.l = lo(SIC_IWR0);
         r0.l = lo(IWR_ENABLE_ALL);
         r0.h = hi(IWR_ENABLE_ALL);
         [p0] = r0;
diff --git a/arch/blackfin/mach-bf548/ints-priority.c b/arch/blackfin/mach-bf548/ints-priority.c
index cb0ebac53c79..2665653cee37 100644
--- a/arch/blackfin/mach-bf548/ints-priority.c
+++ b/arch/blackfin/mach-bf548/ints-priority.c
@@ -4,7 +4,7 @@
  * Author:       Michael Hennerich
  *
  * Created:
- * Description:  Set up the interupt priorities
+ * Description:  Set up the interrupt priorities
  *
  * Modified:
  *               Copyright 2004-2006 Analog Devices Inc.
@@ -58,7 +58,7 @@ void program_IAR(void)
                             ((CONFIG_IRQ_PINT1 - 7) << IRQ_PINT1_POS) |
                             ((CONFIG_IRQ_MDMAS0 - 7) << IRQ_MDMAS0_POS) |
                             ((CONFIG_IRQ_MDMAS1 - 7) << IRQ_MDMAS1_POS) |
-                            ((CONFIG_IRQ_WATCHDOG - 7) << IRQ_WATCHDOG_POS));
+                            ((CONFIG_IRQ_WATCHDOG - 7) << IRQ_WATCH_POS));
 
         bfin_write_SIC_IAR3(((CONFIG_IRQ_DMAC1_ERR - 7) << IRQ_DMAC1_ERR_POS) |
                             ((CONFIG_IRQ_SPORT2_ERR - 7) << IRQ_SPORT2_ERR_POS) |
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index c19cd29b948a..3a79a9061bdc 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -198,6 +198,13 @@ static struct platform_device bfin_spi0_device = {
 #endif  /* spi master and devices */
 
 
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+static struct platform_device hitachi_fb_device = {
+        .name = "hitachi-tx09",
+};
+#endif
+
+
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 
 static struct resource smc91x_resources[] = {
@@ -315,6 +322,10 @@ static struct platform_device bfin_pata_device = {
 
 static struct platform_device *cm_bf561_devices[] __initdata = {
 
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+        &hitachi_fb_device,
+#endif
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
         &bfin_uart_device,
 #endif
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 4ff8f6e7a11f..7601c3be1b5c 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -29,6 +29,9 @@
 
 #include <linux/device.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -155,6 +158,44 @@ static struct platform_device bfin_uart_device = {
 };
 #endif
 
+static struct mtd_partition ezkit_partitions[] = {
+        {
+                .name       = "Bootloader",
+                .size       = 0x20000,
+                .offset     = 0,
+        }, {
+                .name       = "Kernel",
+                .size       = 0xE0000,
+                .offset     = MTDPART_OFS_APPEND,
+        }, {
+                .name       = "RootFS",
+                .size       = MTDPART_SIZ_FULL,
+                .offset     = MTDPART_OFS_APPEND,
+        }
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+        .width      = 2,
+        .parts      = ezkit_partitions,
+        .nr_parts   = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+        .start = 0x20000000,
+        .end   = 0x207fffff,
+        .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+        .name          = "physmap-flash",
+        .id            = 0,
+        .dev = {
+                .platform_data = &ezkit_flash_data,
+        },
+        .num_resources = 1,
+        .resource      = &ezkit_flash_resource,
+};
+
 #ifdef CONFIG_SPI_BFIN
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
         || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
@@ -246,6 +287,50 @@ static struct platform_device bfin_pata_device = {
 };
 #endif
 
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+        {BTN_0, GPIO_PF5, 1, "gpio-keys: BTN0"},
+        {BTN_1, GPIO_PF6, 1, "gpio-keys: BTN1"},
+        {BTN_2, GPIO_PF7, 1, "gpio-keys: BTN2"},
+        {BTN_3, GPIO_PF8, 1, "gpio-keys: BTN3"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+        .buttons        = bfin_gpio_keys_table,
+        .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+        .name      = "gpio-keys",
+        .dev = {
+                .platform_data = &bfin_gpio_keys_data,
+        },
+};
+#endif
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#include <linux/i2c-gpio.h>
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+        .sda_pin                = 1,
+        .scl_pin                = 0,
+        .sda_is_open_drain      = 0,
+        .scl_is_open_drain      = 0,
+        .udelay                 = 40,
+};
+
+static struct platform_device i2c_gpio_device = {
+        .name           = "i2c-gpio",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &i2c_gpio_data,
+        },
+};
+#endif
+
 static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
         &smc91x_device,
@@ -258,12 +343,23 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
         &bfin_spi0_device,
 #endif
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
         &bfin_uart_device,
 #endif
+
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
         &bfin_pata_device,
 #endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+        &bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+        &i2c_gpio_device,
+#endif
+        &ezkit_flash_device,
 };
 
 static int __init ezkit_init(void)
diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c
index 5d1d21b4c2a7..1b44e9e6dc3b 100644
--- a/arch/blackfin/mach-bf561/coreb.c
+++ b/arch/blackfin/mach-bf561/coreb.c
@@ -33,7 +33,9 @@
 #include <linux/ioport.h>
 #include <linux/module.h>
 #include <linux/uaccess.h>
+#include <linux/fs.h>
 #include <asm/dma.h>
+#include <asm/cacheflush.h>
 
 #define MODULE_VER              "v0.1"
 
@@ -90,11 +92,12 @@ static ssize_t coreb_write(struct file *file, const char *buf, size_t count,
 
                 coreb_dma_done = 0;
 
+                flush_dcache_range((unsigned long)buf, (unsigned long)(buf+len));
                 /* Source Channel */
                 set_dma_start_addr(CH_MEM_STREAM2_SRC, (unsigned long)buf);
                 set_dma_x_count(CH_MEM_STREAM2_SRC, len);
                 set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char));
-                set_dma_config(CH_MEM_STREAM2_SRC, RESTART);
+                set_dma_config(CH_MEM_STREAM2_SRC, 0);
                 /* Destination Channel */
                 set_dma_start_addr(CH_MEM_STREAM2_DEST, coreb_base + p);
                 set_dma_x_count(CH_MEM_STREAM2_DEST, len);
@@ -135,11 +138,12 @@ static ssize_t coreb_read(struct file *file, char *buf, size_t count,
 
                 coreb_dma_done = 0;
 
+                invalidate_dcache_range((unsigned long)buf, (unsigned long)(buf+len));
                 /* Source Channel */
                 set_dma_start_addr(CH_MEM_STREAM2_SRC, coreb_base + p);
                 set_dma_x_count(CH_MEM_STREAM2_SRC, len);
                 set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char));
-                set_dma_config(CH_MEM_STREAM2_SRC, RESTART);
+                set_dma_config(CH_MEM_STREAM2_SRC, 0);
                 /* Destination Channel */
                 set_dma_start_addr(CH_MEM_STREAM2_DEST, (unsigned long)buf);
                 set_dma_x_count(CH_MEM_STREAM2_DEST, len);
@@ -266,7 +270,7 @@ static int coreb_ioctl(struct inode *inode, struct file *file,
                 coreb_status |= COREB_IS_RUNNING;
                 bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~0x0020);
                 SSYNC();
-                spin_lock_irq(&coreb_lock);
+                spin_unlock_irq(&coreb_lock);
                 break;
 #if defined(CONFIG_BF561_COREB_RESET)
         case CMD_COREB_STOP:
@@ -275,7 +279,7 @@ static int coreb_ioctl(struct inode *inode, struct file *file,
                 bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() | 0x0020);
                 bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
                 coreb_status &= ~COREB_IS_RUNNING;
-                spin_lock_irq(&coreb_lock);
+                spin_unlock_irq(&coreb_lock);
                 break;
         case CMD_COREB_RESET:
                 printk(KERN_INFO "Resetting Core B\n");
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
index 4d7733dfd5de..8636d4284bdb 100644
--- a/arch/blackfin/mach-common/Makefile
+++ b/arch/blackfin/mach-common/Makefile
@@ -3,10 +3,9 @@
 #
 
 obj-y := \
-        cache.o cacheinit.o cplbhdlr.o cplbmgr.o entry.o \
+        cache.o cacheinit.o entry.o \
         interrupt.o lock.o irqpanic.o arch_checks.o
 
-obj-$(CONFIG_CPLB_INFO)          += cplbinfo.o
 obj-$(CONFIG_BFIN_SINGLE_CORE)   += ints-priority-sc.o
 obj-$(CONFIG_BFIN_DUAL_CORE)     += ints-priority-dc.o
 obj-$(CONFIG_PM)                 += pm.o dpmc.o
diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S
index 39fbc2861107..b82c096e1980 100644
--- a/arch/blackfin/mach-common/dpmc.S
+++ b/arch/blackfin/mach-common/dpmc.S
@@ -38,6 +38,9 @@ ENTRY(_unmask_wdog_wakeup_evt)
 #if defined(CONFIG_BF561)
         P0.H = hi(SICA_IWR1);
         P0.L = lo(SICA_IWR1);
+#elif defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
+        P0.h = HI(SIC_IWR0);
+        P0.l = LO(SIC_IWR0);
 #else
         P0.h = HI(SIC_IWR);
         P0.l = LO(SIC_IWR);
@@ -172,7 +175,7 @@ ENTRY(_sleep_mode)
         call _set_sic_iwr;
 
         R0 = 0xFFFF (Z);
-        call _set_rtc_istat
+        call _set_rtc_istat;
 
         P0.H = hi(PLL_CTL);
         P0.L = lo(PLL_CTL);
@@ -210,7 +213,7 @@ ENTRY(_hibernate_mode)
         call _set_sic_iwr;
 
         R0 = 0xFFFF (Z);
-        call _set_rtc_istat
+        call _set_rtc_istat;
 
         P0.H = hi(VR_CTL);
         P0.L = lo(VR_CTL);
@@ -236,7 +239,7 @@ ENTRY(_deep_sleep)
 
         call _set_sic_iwr;
 
-        call _set_sdram_srfs;
+        call _set_dram_srfs;
 
         /* Clear all the interrupts,bits sticky */
         R0 = 0xFFFF (Z);
@@ -253,7 +256,7 @@ ENTRY(_deep_sleep)
         SSYNC;
         IDLE;
 
-        call _unset_sdram_srfs;
+        call _unset_dram_srfs;
 
         call _test_pll_locked;
 
@@ -285,23 +288,22 @@ ENTRY(_sleep_deeper)
         P3 = R0;
         R0 = IWR_ENABLE(0);
         call _set_sic_iwr;
-        call _set_sdram_srfs;
+        call _set_dram_srfs;    /* Set SDRAM Self Refresh */
 
         /* Clear all the interrupts,bits sticky */
         R0 = 0xFFFF (Z);
-        call _set_rtc_istat
-
+        call _set_rtc_istat;
         P0.H = hi(PLL_DIV);
         P0.L = lo(PLL_DIV);
         R6 = W[P0](z);
         R0.L = 0xF;
-        W[P0] = R0.l;
+        W[P0] = R0.l;           /* Set Max VCO to SCLK divider */
 
         P0.H = hi(PLL_CTL);
         P0.L = lo(PLL_CTL);
         R5 = W[P0](z);
         R0.L = (CONFIG_MIN_VCO_HZ/CONFIG_CLKIN_HZ) << 9;
-        W[P0] = R0.l;
+        W[P0] = R0.l;           /* Set Min CLKIN to VCO multiplier */
 
         SSYNC;
         IDLE;
@@ -317,29 +319,28 @@ ENTRY(_sleep_deeper)
         R1 = R1|R2;
 
         R2 = DEPOSIT(R7, R1);
-        W[P0] = R2;
+        W[P0] = R2;             /* Set Min Core Voltage */
 
         SSYNC;
         IDLE;
 
         call _test_pll_locked;
 
+        R0 = P3;
+        call _set_sic_iwr;      /* Set Awake from IDLE */
+
         P0.H = hi(PLL_CTL);
         P0.L = lo(PLL_CTL);
         R0 = W[P0](z);
         BITSET (R0, 3);
-        W[P0] = R0.L;
-
-        R0 = P3;
-        call _set_sic_iwr;
-
+        W[P0] = R0.L;           /* Turn CCLK OFF */
         SSYNC;
         IDLE;
 
         call _test_pll_locked;
 
         R0 = IWR_ENABLE(0);
-        call _set_sic_iwr;
+        call _set_sic_iwr;      /* Set Awake from IDLE PLL */
 
         P0.H = hi(VR_CTL);
         P0.L = lo(VR_CTL);
@@ -352,15 +353,15 @@ ENTRY(_sleep_deeper)
 
         P0.H = hi(PLL_DIV);
         P0.L = lo(PLL_DIV);
-        W[P0]= R6;
+        W[P0]= R6;              /* Restore CCLK and SCLK divider */
 
         P0.H = hi(PLL_CTL);
         P0.L = lo(PLL_CTL);
-        w[p0] = R5;
+        w[p0] = R5;             /* Restore VCO multiplier */
         IDLE;
         call _test_pll_locked;
 
-        call _unset_sdram_srfs;
+        call _unset_dram_srfs;  /* SDRAM Self Refresh Off */
 
         STI R4;
 
@@ -368,25 +369,47 @@ ENTRY(_sleep_deeper)
         ( R7:0, P5:0 ) = [SP++];
         RTS;
 
-ENTRY(_set_sdram_srfs)
-        /*  set the sdram to self refresh mode */
+ENTRY(_set_dram_srfs)
+        /*  set the dram to self refresh mode */
+#if defined(CONFIG_BF54x)
+        P0.H = hi(EBIU_RSTCTL);
+        P0.L = lo(EBIU_RSTCTL);
+        R2 = [P0];
+        R3.H = hi(SRREQ);
+        R3.L = lo(SRREQ);
+#else
         P0.H = hi(EBIU_SDGCTL);
         P0.L = lo(EBIU_SDGCTL);
         R2 = [P0];
         R3.H = hi(SRFS);
         R3.L = lo(SRFS);
+#endif
         R2 = R2|R3;
         [P0] = R2;
         ssync;
+#if defined(CONFIG_BF54x)
+.LSRR_MODE:
+        R2 = [P0];
+        CC = BITTST(R2, 4);
+        if !CC JUMP .LSRR_MODE;
+#endif
         RTS;
 
-ENTRY(_unset_sdram_srfs)
-        /*  set the sdram out of self refresh mode */
+ENTRY(_unset_dram_srfs)
+        /*  set the dram out of self refresh mode */
+#if defined(CONFIG_BF54x)
+        P0.H = hi(EBIU_RSTCTL);
+        P0.L = lo(EBIU_RSTCTL);
+        R2 = [P0];
+        R3.H = hi(SRREQ);
+        R3.L = lo(SRREQ);
+#else
         P0.H = hi(EBIU_SDGCTL);
         P0.L = lo(EBIU_SDGCTL);
         R2 = [P0];
         R3.H = hi(SRFS);
         R3.L = lo(SRFS);
+#endif
         R3 = ~R3;
         R2 = R2&R3;
         [P0] = R2;
@@ -394,8 +417,13 @@ ENTRY(_unset_sdram_srfs)
         RTS;
 
 ENTRY(_set_sic_iwr)
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
+        P0.H = hi(SIC_IWR0);
+        P0.L = lo(SIC_IWR0);
+#else
         P0.H = hi(SIC_IWR);
         P0.L = lo(SIC_IWR);
+#endif
         [P0] = R0;
         SSYNC;
         RTS;
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index dc9d3ee2e691..56ff51bc8c21 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -95,6 +95,9 @@ ENTRY(_ex_workaround_261)
         R6 = 0x26;      /* Data CPLB Miss */
         cc = R6 == R7;
         if cc jump _ex_dcplb_miss (BP);
+        R6 = 0x23;      /* Data CPLB Miss */
+        cc = R6 == R7;
+        if cc jump _ex_dcplb_viol (BP);
         /* Handle 0x23 Data CPLB Protection Violation
          * and Data CPLB Multiple Hits - Linux Trap Zero
          */
@@ -102,17 +105,33 @@ ENTRY(_ex_workaround_261)
 ENDPROC(_ex_workaround_261)
 
 #else
+#ifdef CONFIG_MPU
+#define _ex_dviol _ex_dcplb_viol
+#else
 #define _ex_dviol _ex_trap_c
+#endif
 #define _ex_dmiss _ex_dcplb_miss
 #define _ex_dmult _ex_trap_c
 #endif
 
+
+ENTRY(_ex_dcplb_viol)
 ENTRY(_ex_dcplb_miss)
 ENTRY(_ex_icplb_miss)
         (R7:6,P5:4) = [sp++];
         ASTAT = [sp++];
         SAVE_ALL_SYS
+#ifdef CONFIG_MPU
+        R0 = SEQSTAT;
+        R1 = SP;
+        sp += -12;
+        call _cplb_hdr;
+        sp += 12;
+        CC = R0 == 0;
+        IF !CC JUMP _handle_bad_cplb;
+#else
         call __cplb_hdr;
+#endif
         DEBUG_START_HWTRACE(p5, r7)
         RESTORE_ALL_SYS
         SP = EX_SCRATCH_REG;
@@ -329,7 +348,7 @@ ENTRY(_exception_to_level5)
         R7 = R7 + R6;
         P5 = R7;
         R1 = [P5];
-        [SP + 8] = r1;
+        [SP + PT_SEQSTAT] = r1;
 
         r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
         SP += -12;
@@ -633,9 +652,7 @@ ENTRY(_ret_from_exception)
         [sp + PT_IPEND] = r0;
 
 1:
-        r1 = 0x37(Z);
-        r2 = ~r1;
-        r2.h = 0;
+        r2 = LO(~0x37) (Z);
         r0 = r2 & r0;
         cc = r0 == 0;
         if !cc jump 4f; /* if not return to user mode, get out */
@@ -1364,6 +1381,7 @@ ENTRY(_sys_call_table)
         .long _sys_set_robust_list
         .long _sys_get_robust_list      /* 355 */
         .long _sys_fallocate
+        .long _sys_semtimedop
         .rept NR_syscalls-(.-_sys_call_table)/4
         .long _sys_ni_syscall
         .endr
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 4de376418a18..7f752c87fe46 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -34,9 +34,13 @@
 #include <asm/entry.h>
 #include <asm/asm-offsets.h>
 #include <asm/trace.h>
+#include <asm/traps.h>
+#include <asm/thread_info.h>
 
 #include <asm/mach-common/context.S>
 
+.extern _ret_from_exception
+
 #ifdef CONFIG_I_ENTRY_L1
 .section .l1.text
 #else
@@ -117,8 +121,8 @@ __common_int_entry:
 
 #if ANOMALY_05000283 || ANOMALY_05000315
         cc = r7 == r7;
-        p5.h = 0xffc0;
-        p5.l = 0x0014;
+        p5.h = HI(CHIPID);
+        p5.l = LO(CHIPID);
         if cc jump 1f;
         r7.l = W[p5];
 1:
@@ -134,26 +138,22 @@ __common_int_entry:
 
 /* interrupt routine for ivhw - 5 */
 ENTRY(_evt_ivhw)
-        SAVE_CONTEXT
+        SAVE_ALL_SYS
 #ifdef CONFIG_FRAME_POINTER
         fp = 0;
 #endif
+
 #if ANOMALY_05000283
         cc = r7 == r7;
-        p5.h = 0xffc0;
-        p5.l = 0x0014;
+        p5.h = HI(CHIPID);
+        p5.l = LO(CHIPID);
         if cc jump 1f;
         r7.l = W[p5];
 1:
 #endif
 
-        trace_buffer_stop(p0, r0);
-
-        r0 = IRQ_HWERR;
-        r1 = sp;
-
 #ifdef CONFIG_HARDWARE_PM
-        r7 = SEQSTAT;
+        r7 = [sp + PT_SEQSTAT];
         r7 = r7 >>> 0xe;
         r6 = 0x1F;
         r7 = r7 & r6;
@@ -161,11 +161,29 @@ ENTRY(_evt_ivhw)
         cc = r7 == r5;
         if cc jump .Lcall_do_ovf; /* deal with performance counter overflow */
 #endif
-
+        # We are going to dump something out, so make sure we print IPEND properly
+        p2.l = lo(IPEND);
+        p2.h = hi(IPEND);
+        r0 = [p2];
+        [sp + PT_IPEND] = r0;
+
+        /* set the EXCAUSE to HWERR for trap_c */
+        r0 = [sp + PT_SEQSTAT];
+        R1.L = LO(VEC_HWERR);
+        R1.H = HI(VEC_HWERR);
+        R0 = R0 | R1;
+        [sp + PT_SEQSTAT] = R0;
+
+        r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
         SP += -12;
-        call _irq_panic;
+        call _trap_c;
         SP += 12;
+
+        call _ret_from_exception;
+.Lcommon_restore_all_sys:
+        RESTORE_ALL_SYS
         rti;
+
 #ifdef CONFIG_HARDWARE_PM
 .Lcall_do_ovf:
 
@@ -173,9 +191,11 @@ ENTRY(_evt_ivhw)
         call _pm_overflow;
         SP += 12;
 
-        jump .Lcommon_restore_context;
+        jump .Lcommon_restore_all_sys;
 #endif
 
+ENDPROC(_evt_ivhw)
+
 /* Interrupt routine for evt2 (NMI).
  * We don't actually use this, so just return.
  * For inner circle type details, please see:
diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c
index 4882f0e801a9..8d18d6b163bb 100644
--- a/arch/blackfin/mach-common/ints-priority-dc.c
+++ b/arch/blackfin/mach-common/ints-priority-dc.c
@@ -222,11 +222,12 @@ static void bf561_gpio_unmask_irq(unsigned int irq)
 static unsigned int bf561_gpio_irq_startup(unsigned int irq)
 {
         unsigned int ret;
+        char buf[8];
         u16 gpionr = irq - IRQ_PF0;
 
         if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
-
-                ret = gpio_request(gpionr, "IRQ");
+                snprintf(buf, sizeof buf, "IRQ %d", irq);
+                ret = gpio_request(gpionr, buf);
                 if (ret)
                         return ret;
 
@@ -250,6 +251,7 @@ static int bf561_gpio_irq_type(unsigned int irq, unsigned int type)
 {
 
         unsigned int ret;
+        char buf[8];
         u16 gpionr = irq - IRQ_PF0;
 
 
@@ -265,8 +267,8 @@ static int bf561_gpio_irq_type(unsigned int irq, unsigned int type)
                             IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
 
                 if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
-
-                        ret = gpio_request(gpionr, "IRQ");
+                        snprintf(buf, sizeof buf, "IRQ %d", irq);
+                        ret = gpio_request(gpionr, buf);
                         if (ret)
                                 return ret;
 
diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c
index 147f0731087a..dec42acb5de0 100644
--- a/arch/blackfin/mach-common/ints-priority-sc.c
+++ b/arch/blackfin/mach-common/ints-priority-sc.c
@@ -313,6 +313,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq,
 static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
 static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)];
 
+
 static void bfin_gpio_ack_irq(unsigned int irq)
 {
         u16 gpionr = irq - IRQ_PF0;
@@ -352,9 +353,11 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq)
 {
         unsigned int ret;
         u16 gpionr = irq - IRQ_PF0;
+        char buf[8];
 
         if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
-                ret = gpio_request(gpionr, "IRQ");
+                snprintf(buf, sizeof buf, "IRQ %d", irq);
+                ret = gpio_request(gpionr, buf);
                 if (ret)
                         return ret;
         }
@@ -376,6 +379,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
 {
 
         unsigned int ret;
+        char buf[8];
         u16 gpionr = irq - IRQ_PF0;
 
         if (type == IRQ_TYPE_PROBE) {
@@ -388,7 +392,8 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
         if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
                     IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
                 if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
-                        ret = gpio_request(gpionr, "IRQ");
+                        snprintf(buf, sizeof buf, "IRQ %d", irq);
+                        ret = gpio_request(gpionr, buf);
                         if (ret)
                                 return ret;
                 }
@@ -478,6 +483,10 @@ static void bfin_demux_gpio_irq(unsigned int intb_irq,
 static unsigned char irq2pint_lut[NR_PINTS];
 static unsigned char pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS];
 
+static unsigned int gpio_both_edge_triggered[NR_PINT_SYS_IRQS];
+static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
+
+
 struct pin_int_t {
         unsigned int mask_set;
         unsigned int mask_clear;
@@ -544,13 +553,20 @@ void init_pint_lut(void)
 
 }
 
-static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
-
 static void bfin_gpio_ack_irq(unsigned int irq)
 {
         u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+        u32 pintbit = PINT_BIT(pint_val);
+        u8 bank = PINT_2_BANK(pint_val);
+
+        if (unlikely(gpio_both_edge_triggered[bank] & pintbit)) {
+                if (pint[bank]->invert_set & pintbit)
+                        pint[bank]->invert_clear = pintbit;
+                else
+                        pint[bank]->invert_set = pintbit;
+        }
+        pint[bank]->request = pintbit;
 
-        pint[PINT_2_BANK(pint_val)]->request = PINT_BIT(pint_val);
         SSYNC();
 }
 
@@ -560,6 +576,13 @@ static void bfin_gpio_mask_ack_irq(unsigned int irq)
         u32 pintbit = PINT_BIT(pint_val);
         u8 bank = PINT_2_BANK(pint_val);
 
+        if (unlikely(gpio_both_edge_triggered[bank] & pintbit)) {
+                if (pint[bank]->invert_set & pintbit)
+                        pint[bank]->invert_clear = pintbit;
+                else
+                        pint[bank]->invert_set = pintbit;
+        }
+
         pint[bank]->request = pintbit;
         pint[bank]->mask_clear = pintbit;
         SSYNC();
@@ -587,7 +610,8 @@ static void bfin_gpio_unmask_irq(unsigned int irq)
 static unsigned int bfin_gpio_irq_startup(unsigned int irq)
 {
         unsigned int ret;
-        u16 gpionr = irq - IRQ_PA0;
+        char buf[8];
+        u16 gpionr = irq_to_gpio(irq);
         u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
 
         if (pint_val == IRQ_NOT_AVAIL) {
@@ -598,7 +622,8 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq)
         }
 
         if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
-                ret = gpio_request(gpionr, "IRQ");
+                snprintf(buf, sizeof buf, "IRQ %d", irq);
+                ret = gpio_request(gpionr, buf);
                 if (ret)
                         return ret;
         }
@@ -611,16 +636,19 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq)
 
 static void bfin_gpio_irq_shutdown(unsigned int irq)
 {
+        u16 gpionr = irq_to_gpio(irq);
+
         bfin_gpio_mask_irq(irq);
-        gpio_free(irq - IRQ_PA0);
-        gpio_enabled[gpio_bank(irq - IRQ_PA0)] &= ~gpio_bit(irq - IRQ_PA0);
+        gpio_free(gpionr);
+        gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
 }
 
 static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
 {
 
         unsigned int ret;
-        u16 gpionr = irq - IRQ_PA0;
+        char buf[8];
+        u16 gpionr = irq_to_gpio(irq);
         u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
         u32 pintbit = PINT_BIT(pint_val);
         u8 bank = PINT_2_BANK(pint_val);
@@ -638,7 +666,8 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
         if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
                     IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
                 if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
-                        ret = gpio_request(gpionr, "IRQ");
+                        snprintf(buf, sizeof buf, "IRQ %d", irq);
+                        ret = gpio_request(gpionr, buf);
                         if (ret)
                                 return ret;
                 }
@@ -651,28 +680,33 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
 
         gpio_direction_input(gpionr);
 
-        if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
-                pint[bank]->edge_set = pintbit;
-        } else {
-                pint[bank]->edge_clear = pintbit;
-        }
-
         if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
                 pint[bank]->invert_set = pintbit;       /* low or falling edge denoted by one */
         else
-                pint[bank]->invert_set = pintbit;       /* high or rising edge denoted by zero */
+                pint[bank]->invert_clear = pintbit;     /* high or rising edge denoted by zero */
 
-        if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
-                pint[bank]->invert_set = pintbit;
-        else
-                pint[bank]->invert_set = pintbit;
+        if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+            == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
 
-        SSYNC();
+                gpio_both_edge_triggered[bank] |= pintbit;
 
-        if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+                if (gpio_get_value(gpionr))
+                        pint[bank]->invert_set = pintbit;
+                else
+                        pint[bank]->invert_clear = pintbit;
+        } else {
+                gpio_both_edge_triggered[bank] &= ~pintbit;
+        }
+
+        if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+                pint[bank]->edge_set = pintbit;
                 set_irq_handler(irq, handle_edge_irq);
-        else
+        } else {
+                pint[bank]->edge_clear = pintbit;
                 set_irq_handler(irq, handle_level_irq);
+        }
+
+        SSYNC();
 
         return 0;
 }
diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c
index b22959b197e5..606ded9ff4e1 100644
--- a/arch/blackfin/mach-common/irqpanic.c
+++ b/arch/blackfin/mach-common/irqpanic.c
@@ -46,9 +46,6 @@ void irq_panic(int reason, struct pt_regs *regs) __attribute__ ((l1_text));
  */
 asmlinkage void irq_panic(int reason, struct pt_regs *regs)
 {
-        int sig = 0;
-        siginfo_t info;
-
 #ifdef CONFIG_DEBUG_ICACHE_CHECK
         unsigned int cmd, tag, ca, cache_hi, cache_lo, *pa;
         unsigned short i, j, die;
@@ -136,53 +133,6 @@ asmlinkage void irq_panic(int reason, struct pt_regs *regs)
         }
 #endif
 
-        printk(KERN_EMERG "\n");
-        printk(KERN_EMERG "Exception: IRQ 0x%x entered\n", reason);
-        printk(KERN_EMERG " code=[0x%08lx],   stack frame=0x%08lx,  "
-            " bad PC=0x%08lx\n",
-            (unsigned long)regs->seqstat,
-            (unsigned long)regs,
-            (unsigned long)regs->pc);
-        if (reason == 0x5) {
-                printk(KERN_EMERG "----------- HARDWARE ERROR -----------\n");
-
-                /* There is only need to check for Hardware Errors, since other
-                 * EXCEPTIONS are handled in TRAPS.c (MH)
-                 */
-                switch (regs->seqstat & SEQSTAT_HWERRCAUSE) {
-                case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR):   /* System MMR Error */
-                        info.si_code = BUS_ADRALN;
-                        sig = SIGBUS;
-                        printk(KERN_EMERG HWC_x2(KERN_EMERG));
-                        break;
-                case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR):  /* External Memory Addressing Error */
-                        info.si_code = BUS_ADRERR;
-                        sig = SIGBUS;
-                        printk(KERN_EMERG HWC_x3(KERN_EMERG));
-                        break;
-                case (SEQSTAT_HWERRCAUSE_PERF_FLOW):    /* Performance Monitor Overflow */
-                        printk(KERN_EMERG HWC_x12(KERN_EMERG));
-                        break;
-                case (SEQSTAT_HWERRCAUSE_RAISE_5):      /* RAISE 5 instruction */
-                        printk(KERN_EMERG HWC_x18(KERN_EMERG));
-                        break;
-                default:        /* Reserved */
-                        printk(KERN_EMERG HWC_default(KERN_EMERG));
-                        break;
-                }
-        }
-
-        regs->ipend = bfin_read_IPEND();
-        dump_bfin_process(regs);
-        dump_bfin_mem((void *)regs->pc);
-        show_regs(regs);
-        if (0 == (info.si_signo = sig) || 0 == user_mode(regs)) /* in kernelspace */
-                panic("Unhandled IRQ or exceptions!\n");
-        else {                  /* in userspace */
-                info.si_errno = 0;
-                info.si_addr = (void *)regs->pc;
-                force_sig_info(sig, &info, current);
-        }
 }
 
 #ifdef CONFIG_HARDWARE_PM
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index dac51fb06f22..81930f7d06f1 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -77,7 +77,15 @@ void bfin_pm_suspend_standby_enter(void)
 
                 gpio_pm_restore();
 
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
+                bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
+                bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
+# ifdef CONFIG_BF54x
+                bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
+# endif
+#else
                 bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+#endif
 
                 local_irq_restore(flags);
         }
@@ -85,7 +93,15 @@ void bfin_pm_suspend_standby_enter(void)
 
 #if defined(CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR)
         sleep_deeper(CONFIG_PM_WAKEUP_SIC_IWR);
+# if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
+        bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
+        bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
+#  ifdef CONFIG_BF54x
+        bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
+#  endif
+# else
         bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+# endif
 #endif                          /* CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR */
 }
 
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index e97ea8fc8dc4..eb1a12ac9e33 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -128,8 +128,8 @@ void __init paging_init(void)
 void __init mem_init(void)
 {
         unsigned int codek = 0, datak = 0, initk = 0;
+        unsigned int reservedpages = 0, freepages = 0;
         unsigned long tmp;
-        unsigned int len = _ramend - _rambase;
         unsigned long start_mem = memory_start;
         unsigned long end_mem = memory_end;
 
@@ -138,19 +138,36 @@ void __init mem_init(void)
 
         start_mem = PAGE_ALIGN(start_mem);
         max_mapnr = num_physpages = MAP_NR(high_memory);
-        printk(KERN_INFO "Physical pages: %lx\n", num_physpages);
+        printk(KERN_INFO "Kernel managed physical pages: %lu\n",
+                num_physpages);
 
         /* This will put all memory onto the freelists. */
         totalram_pages = free_all_bootmem();
 
+        reservedpages = 0;
+        for (tmp = 0; tmp < max_mapnr; tmp++)
+                if (PageReserved(pfn_to_page(tmp)))
+                        reservedpages++;
+        freepages =  max_mapnr - reservedpages;
+
+        /* do not count in kernel image between _rambase and _ramstart */
+        reservedpages -= (_ramstart - _rambase) >> PAGE_SHIFT;
+#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
+        reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >>
+                                PAGE_SHIFT;
+#endif
+
         codek = (_etext - _stext) >> 10;
-        datak = (__bss_stop - __bss_start) >> 10;
         initk = (__init_end - __init_begin) >> 10;
+        datak = ((_ramstart - _rambase) >> 10) - codek - initk;
 
-        tmp = nr_free_pages() << PAGE_SHIFT;
         printk(KERN_INFO
-             "Memory available: %luk/%uk RAM, (%uk init code, %uk kernel code, %uk data, %uk dma)\n",
-             tmp >> 10, len >> 10, initk, codek, datak, DMA_UNCACHED_REGION >> 10);
+             "Memory available: %luk/%luk RAM, "
+                "(%uk init code, %uk kernel code, "
+                "%uk data, %uk dma, %uk reserved)\n",
+                (unsigned long) freepages << (PAGE_SHIFT-10), _ramend >> 10,
+                initk, codek, datak, DMA_UNCACHED_REGION >> 10,
+                (reservedpages << (PAGE_SHIFT-10)));
 
         /* Initialize the blackfin L1 Memory. */
         l1sram_init();
@@ -184,13 +201,15 @@ static __init void free_init_pages(const char *what, unsigned long begin, unsign
 #ifdef CONFIG_BLK_DEV_INITRD
 void __init free_initrd_mem(unsigned long start, unsigned long end)
 {
+#ifndef CONFIG_MPU
         free_init_pages("initrd memory", start, end);
+#endif
 }
 #endif
 
 void __init free_initmem(void)
 {
-#ifdef CONFIG_RAMKERNEL
+#if defined CONFIG_RAMKERNEL && !defined CONFIG_MPU
         free_init_pages("unused kernel memory",
                         (unsigned long)(&__init_begin),
                         (unsigned long)(&__init_end));
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 6f475b609864..ac2a3ef28d55 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -442,7 +442,8 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
                 set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP,
                         INTR_ON_BUF,
                         DIMENSION_LINEAR,
-                        DATA_SIZE_8));
+                        DATA_SIZE_8,
+                        DMA_SYNC_RESTART));
         set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail));
         set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
         set_dma_x_modify(uart->tx_dma_channel, 1);
@@ -689,7 +690,8 @@ static int bfin_serial_startup(struct uart_port *port)
         set_dma_config(uart->rx_dma_channel,
                 set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO,
                                 INTR_ON_ROW, DIMENSION_2D,
-                                DATA_SIZE_8));
+                                DATA_SIZE_8,
+                                DMA_SYNC_RESTART));
         set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT);
         set_dma_x_modify(uart->rx_dma_channel, 1);
         set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT);
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 74d11c318987..c8e7427a0bc8 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -224,7 +224,8 @@ static int config_dma(struct bfin_bf54xfb_info *fbi)
         set_dma_config(CH_EPPI0,
                        set_bfin_dma_config(DIR_READ, DMA_FLOW_AUTO,
                                            INTR_DISABLE, DIMENSION_2D,
-                                           DATA_SIZE_32));
+                                           DATA_SIZE_32,
+                                           DMA_NOSYNC_KEEP_DMA_BUF));
         set_dma_x_count(CH_EPPI0, (LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE);
         set_dma_x_modify(CH_EPPI0, DMA_BUS_SIZE / 8);
         set_dma_y_count(CH_EPPI0, LCD_Y_RES);
@@ -263,8 +264,7 @@ static int request_ports(struct bfin_bf54xfb_info *fbi)
                 }
         }
 
-        gpio_direction_output(disp);
-        gpio_set_value(disp, 1);
+        gpio_direction_output(disp, 1);
 
         return 0;
 }
diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h
index 39bdd86871cf..6ae0619d7696 100644
--- a/include/asm-blackfin/bfin-global.h
+++ b/include/asm-blackfin/bfin-global.h
@@ -51,7 +51,7 @@ extern unsigned long sclk_to_usecs(unsigned long sclk);
 extern unsigned long usecs_to_sclk(unsigned long usecs);
 
 extern void dump_bfin_process(struct pt_regs *regs);
-extern void dump_bfin_mem(void *retaddr);
+extern void dump_bfin_mem(struct pt_regs *regs);
 extern void dump_bfin_trace_buffer(void);
 
 extern int init_arch_irq(void);
diff --git a/include/asm-blackfin/cplb-mpu.h b/include/asm-blackfin/cplb-mpu.h
new file mode 100644
index 000000000000..75c67b99d607
--- /dev/null
+++ b/include/asm-blackfin/cplb-mpu.h
@@ -0,0 +1,61 @@
+/*
+ * File:         include/asm-blackfin/cplbinit.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#ifndef __ASM_BFIN_CPLB_MPU_H
+#define __ASM_BFIN_CPLB_MPU_H
+
+struct cplb_entry {
+        unsigned long data, addr;
+};
+
+struct mem_region {
+        unsigned long start, end;
+        unsigned long dcplb_data;
+        unsigned long icplb_data;
+};
+
+extern struct cplb_entry dcplb_tbl[MAX_CPLBS];
+extern struct cplb_entry icplb_tbl[MAX_CPLBS];
+extern int first_switched_icplb;
+extern int first_mask_dcplb;
+extern int first_switched_dcplb;
+
+extern int nr_dcplb_miss, nr_icplb_miss, nr_icplb_supv_miss, nr_dcplb_prot;
+extern int nr_cplb_flush;
+
+extern int page_mask_order;
+extern int page_mask_nelts;
+
+extern unsigned long *current_rwx_mask;
+
+extern void flush_switched_cplbs(void);
+extern void set_mask_dcplbs(unsigned long *);
+
+extern void __noreturn panic_cplb_error(int seqstat, struct pt_regs *);
+
+#endif /* __ASM_BFIN_CPLB_MPU_H */
diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h
index 06828d77a58f..654375c2b746 100644
--- a/include/asm-blackfin/cplb.h
+++ b/include/asm-blackfin/cplb.h
@@ -65,7 +65,11 @@
 #define SIZE_1M 0x00100000      /* 1M */
 #define SIZE_4M 0x00400000      /* 4M */
 
+#ifdef CONFIG_MPU
+#define MAX_CPLBS 16
+#else
 #define MAX_CPLBS (16 * 2)
+#endif
 
 #define ASYNC_MEMORY_CPLB_COVERAGE      ((ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \
                                  ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE) / SIZE_4M)
diff --git a/include/asm-blackfin/cplbinit.h b/include/asm-blackfin/cplbinit.h
index c4d0596e8e9f..0eb1c1b685a7 100644
--- a/include/asm-blackfin/cplbinit.h
+++ b/include/asm-blackfin/cplbinit.h
@@ -33,6 +33,12 @@
 #include <asm/blackfin.h>
 #include <asm/cplb.h>
 
+#ifdef CONFIG_MPU
+
+#include <asm/cplb-mpu.h>
+
+#else
+
 #define INITIAL_T 0x1
 #define SWITCH_T  0x2
 #define I_CPLB    0x4
@@ -79,6 +85,8 @@ extern u_long ipdt_swapcount_table[];
 extern u_long dpdt_swapcount_table[];
 #endif
 
+#endif /* CONFIG_MPU */
+
 extern unsigned long reserved_mem_dcache_on;
 extern unsigned long reserved_mem_icache_on;
 
diff --git a/include/asm-blackfin/dma.h b/include/asm-blackfin/dma.h
index b469505af364..5abaa2cee8db 100644
--- a/include/asm-blackfin/dma.h
+++ b/include/asm-blackfin/dma.h
@@ -76,6 +76,9 @@ enum dma_chan_status {
 #define INTR_ON_BUF    2
 #define INTR_ON_ROW    3
 
+#define DMA_NOSYNC_KEEP_DMA_BUF 0
+#define DMA_SYNC_RESTART        1
+
 struct dmasg {
         unsigned long next_desc_addr;
         unsigned long start_addr;
@@ -157,7 +160,8 @@ void set_dma_y_count(unsigned int channel, unsigned short y_count);
 void set_dma_y_modify(unsigned int channel, short y_modify);
 void set_dma_config(unsigned int channel, unsigned short config);
 unsigned short set_bfin_dma_config(char direction, char flow_mode,
-                                   char intr_mode, char dma_mode, char width);
+                                   char intr_mode, char dma_mode, char width,
+                                   char syncmode);
 void set_dma_curr_addr(unsigned int channel, unsigned long addr);
 
 /* get curr status for polling */
diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h
index 33ce98ef7e0f..d0426c108262 100644
--- a/include/asm-blackfin/gpio.h
+++ b/include/asm-blackfin/gpio.h
@@ -7,7 +7,7 @@
  * Description:
  *
  * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
+ *               Copyright 2004-2008 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
@@ -304,39 +304,39 @@
 **************************************************************/
 
 #ifndef BF548_FAMILY
-void set_gpio_dir(unsigned short, unsigned short);
-void set_gpio_inen(unsigned short, unsigned short);
-void set_gpio_polar(unsigned short, unsigned short);
-void set_gpio_edge(unsigned short, unsigned short);
-void set_gpio_both(unsigned short, unsigned short);
-void set_gpio_data(unsigned short, unsigned short);
-void set_gpio_maska(unsigned short, unsigned short);
-void set_gpio_maskb(unsigned short, unsigned short);
-void set_gpio_toggle(unsigned short);
-void set_gpiop_dir(unsigned short, unsigned short);
-void set_gpiop_inen(unsigned short, unsigned short);
-void set_gpiop_polar(unsigned short, unsigned short);
-void set_gpiop_edge(unsigned short, unsigned short);
-void set_gpiop_both(unsigned short, unsigned short);
-void set_gpiop_data(unsigned short, unsigned short);
-void set_gpiop_maska(unsigned short, unsigned short);
-void set_gpiop_maskb(unsigned short, unsigned short);
-unsigned short get_gpio_dir(unsigned short);
-unsigned short get_gpio_inen(unsigned short);
-unsigned short get_gpio_polar(unsigned short);
-unsigned short get_gpio_edge(unsigned short);
-unsigned short get_gpio_both(unsigned short);
-unsigned short get_gpio_maska(unsigned short);
-unsigned short get_gpio_maskb(unsigned short);
-unsigned short get_gpio_data(unsigned short);
-unsigned short get_gpiop_dir(unsigned short);
-unsigned short get_gpiop_inen(unsigned short);
-unsigned short get_gpiop_polar(unsigned short);
-unsigned short get_gpiop_edge(unsigned short);
-unsigned short get_gpiop_both(unsigned short);
-unsigned short get_gpiop_maska(unsigned short);
-unsigned short get_gpiop_maskb(unsigned short);
-unsigned short get_gpiop_data(unsigned short);
+void set_gpio_dir(unsigned, unsigned short);
+void set_gpio_inen(unsigned, unsigned short);
+void set_gpio_polar(unsigned, unsigned short);
+void set_gpio_edge(unsigned, unsigned short);
+void set_gpio_both(unsigned, unsigned short);
+void set_gpio_data(unsigned, unsigned short);
+void set_gpio_maska(unsigned, unsigned short);
+void set_gpio_maskb(unsigned, unsigned short);
+void set_gpio_toggle(unsigned);
+void set_gpiop_dir(unsigned, unsigned short);
+void set_gpiop_inen(unsigned, unsigned short);
+void set_gpiop_polar(unsigned, unsigned short);
+void set_gpiop_edge(unsigned, unsigned short);
+void set_gpiop_both(unsigned, unsigned short);
+void set_gpiop_data(unsigned, unsigned short);
+void set_gpiop_maska(unsigned, unsigned short);
+void set_gpiop_maskb(unsigned, unsigned short);
+unsigned short get_gpio_dir(unsigned);
+unsigned short get_gpio_inen(unsigned);
+unsigned short get_gpio_polar(unsigned);
+unsigned short get_gpio_edge(unsigned);
+unsigned short get_gpio_both(unsigned);
+unsigned short get_gpio_maska(unsigned);
+unsigned short get_gpio_maskb(unsigned);
+unsigned short get_gpio_data(unsigned);
+unsigned short get_gpiop_dir(unsigned);
+unsigned short get_gpiop_inen(unsigned);
+unsigned short get_gpiop_polar(unsigned);
+unsigned short get_gpiop_edge(unsigned);
+unsigned short get_gpiop_both(unsigned);
+unsigned short get_gpiop_maska(unsigned);
+unsigned short get_gpiop_maskb(unsigned);
+unsigned short get_gpiop_data(unsigned);
 
 struct gpio_port_t {
         unsigned short data;
@@ -382,8 +382,8 @@ struct gpio_port_t {
 #define PM_WAKE_LOW     0x8
 #define PM_WAKE_BOTH_EDGES      (PM_WAKE_RISING | PM_WAKE_FALLING)
 
-int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type);
-void gpio_pm_wakeup_free(unsigned short gpio);
+int gpio_pm_wakeup_request(unsigned gpio, unsigned char type);
+void gpio_pm_wakeup_free(unsigned gpio);
 unsigned int gpio_pm_setup(void);
 void gpio_pm_restore(void);
 
@@ -426,19 +426,19 @@ struct gpio_port_s {
 * MODIFICATION HISTORY :
 **************************************************************/
 
-int gpio_request(unsigned short, const char *);
-void gpio_free(unsigned short);
+int gpio_request(unsigned, const char *);
+void gpio_free(unsigned);
 
-void gpio_set_value(unsigned short gpio, unsigned short arg);
-unsigned short gpio_get_value(unsigned short gpio);
+void gpio_set_value(unsigned gpio, int arg);
+int gpio_get_value(unsigned gpio);
 
 #ifndef BF548_FAMILY
 #define gpio_get_value(gpio)            get_gpio_data(gpio)
 #define gpio_set_value(gpio, value)     set_gpio_data(gpio, value)
 #endif
 
-void gpio_direction_input(unsigned short gpio);
-void gpio_direction_output(unsigned short gpio);
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
 
 #include <asm-generic/gpio.h>           /* cansleep wrappers */
 #include <asm/irq.h>
diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
index 0b867e6a76c4..15dbc21eed8b 100644
--- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
@@ -146,7 +146,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 
         if (uart->rts_pin >= 0) {
                 gpio_request(uart->rts_pin, DRIVER_NAME);
-                gpio_direction_output(uart->rts_pin);
+                gpio_direction_output(uart->rts_pin, 0);
         }
 #endif
 }
diff --git a/include/asm-blackfin/mach-bf527/portmux.h b/include/asm-blackfin/mach-bf527/portmux.h
index dcf001adc63c..ae4d205bfcf5 100644
--- a/include/asm-blackfin/mach-bf527/portmux.h
+++ b/include/asm-blackfin/mach-bf527/portmux.h
@@ -1,6 +1,8 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
+#define MAX_RESOURCES   MAX_BLACKFIN_GPIOS
+
 #define P_PPI0_D0       (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
 #define P_PPI0_D1       (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
 #define P_PPI0_D2       (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0))
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h
index f36ff5af1b91..98209d40abba 100644
--- a/include/asm-blackfin/mach-bf533/anomaly.h
+++ b/include/asm-blackfin/mach-bf533/anomaly.h
@@ -7,9 +7,7 @@
  */
 
 /* This file shoule be up to date with:
- *  - Revision X,  March 23, 2007; ADSP-BF533 Blackfin Processor Anomaly List
- *  - Revision AB, March 23, 2007; ADSP-BF532 Blackfin Processor Anomaly List
- *  - Revision W,  March 23, 2007; ADSP-BF531 Blackfin Processor Anomaly List
+ *  - Revision B, 12/10/2007; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -17,7 +15,7 @@
 
 /* We do not support 0.1 or 0.2 silicon - sorry */
 #if __SILICON_REVISION__ < 3
-# error Kernel will not work on BF533 silicon version 0.0, 0.1, or 0.2
+# error will not work on BF533 silicon version 0.0, 0.1, or 0.2
 #endif
 
 #if defined(__ADSPBF531__)
@@ -251,6 +249,12 @@
 #define ANOMALY_05000192 (__SILICON_REVISION__ < 3)
 /* Internal Voltage Regulator may not start up */
 #define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000266 (0)
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
index 69b9f8e120e9..7871d4313f49 100644
--- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
@@ -111,7 +111,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart)
         }
         if (uart->rts_pin >= 0) {
                 gpio_request(uart->rts_pin, DRIVER_NAME);
-                gpio_direction_input(uart->rts_pin);
+                gpio_direction_input(uart->rts_pin, 0);
         }
 #endif
 }
diff --git a/include/asm-blackfin/mach-bf533/portmux.h b/include/asm-blackfin/mach-bf533/portmux.h
index 137f4884acfe..685a2651dcda 100644
--- a/include/asm-blackfin/mach-bf533/portmux.h
+++ b/include/asm-blackfin/mach-bf533/portmux.h
@@ -1,6 +1,8 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
+#define MAX_RESOURCES   MAX_BLACKFIN_GPIOS
+
 #define P_PPI0_CLK      (P_DONTCARE)
 #define P_PPI0_FS1      (P_DONTCARE)
 #define P_PPI0_FS2      (P_DONTCARE)
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h
index 2b66ecf489f7..746a794b3119 100644
--- a/include/asm-blackfin/mach-bf537/anomaly.h
+++ b/include/asm-blackfin/mach-bf537/anomaly.h
@@ -7,9 +7,7 @@
  */
 
 /* This file shoule be up to date with:
- *  - Revision M, March 13, 2007; ADSP-BF537 Blackfin Processor Anomaly List
- *  - Revision L, March 13, 2007; ADSP-BF536 Blackfin Processor Anomaly List
- *  - Revision M, March 13, 2007; ADSP-BF534 Blackfin Processor Anomaly List
+ *  - Revision A, 09/04/2007; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -17,7 +15,7 @@
 
 /* We do not support 0.1 silicon - sorry */
 #if __SILICON_REVISION__ < 2
-# error Kernel will not work on BF537 silicon version 0.0 or 0.1
+# error will not work on BF537 silicon version 0.0 or 0.1
 #endif
 
 #if defined(__ADSPBF534__)
@@ -44,6 +42,8 @@
 #define ANOMALY_05000122 (1)
 /* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
 #define ANOMALY_05000157 (__SILICON_REVISION__ < 2)
+/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
+#define ANOMALY_05000167 (1)
 /* PPI_DELAY not functional in PPI modes with 0 frame syncs */
 #define ANOMALY_05000180 (1)
 /* Instruction Cache Is Not Functional */
@@ -130,6 +130,12 @@
 #define ANOMALY_05000321 (__SILICON_REVISION__ < 3)
 /* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */
 #define ANOMALY_05000322 (1)
+/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
+#define ANOMALY_05000341 (__SILICON_REVISION__ >= 3)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */
+#define ANOMALY_05000359 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
index 6fb328f5186a..86e45c379838 100644
--- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
@@ -146,7 +146,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 
         if (uart->rts_pin >= 0) {
                 gpio_request(uart->rts_pin, DRIVER_NAME);
-                gpio_direction_output(uart->rts_pin);
+                gpio_direction_output(uart->rts_pin, 0);
         }
 #endif
 }
diff --git a/include/asm-blackfin/mach-bf537/portmux.h b/include/asm-blackfin/mach-bf537/portmux.h
index 5a3f7d3bf73d..78fee6e0f237 100644
--- a/include/asm-blackfin/mach-bf537/portmux.h
+++ b/include/asm-blackfin/mach-bf537/portmux.h
@@ -1,6 +1,8 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
+#define MAX_RESOURCES   (MAX_BLACKFIN_GPIOS + GPIO_BANKSIZE)    /* We additionally handle PORTJ */
+
 #define P_UART0_TX      (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
 #define P_UART0_RX      (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
 #define P_UART1_TX      (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0))
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h
index c5b63759cdee..850dc12eb7f2 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/include/asm-blackfin/mach-bf548/anomaly.h
@@ -7,7 +7,7 @@
  */
 
 /* This file shoule be up to date with:
- *  - Revision C, July 16, 2007; ADSP-BF549 Silicon Anomaly List
+ *  - Revision E, 11/28/2007; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -26,47 +26,59 @@
 /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
 #define ANOMALY_05000272 (1)
 /* False Hardware Error Exception when ISR context is not restored */
-#define ANOMALY_05000281 (1)
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 1)
 /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
-#define ANOMALY_05000304 (1)
+#define ANOMALY_05000304 (__SILICON_REVISION__ < 1)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
-#define ANOMALY_05000312 (1)
+#define ANOMALY_05000312 (__SILICON_REVISION__ < 1)
 /* TWI Slave Boot Mode Is Not Functional */
-#define ANOMALY_05000324 (1)
+#define ANOMALY_05000324 (__SILICON_REVISION__ < 1)
 /* External FIFO Boot Mode Is Not Functional */
-#define ANOMALY_05000325 (1)
+#define ANOMALY_05000325 (__SILICON_REVISION__ < 1)
 /* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */
-#define ANOMALY_05000327 (1)
+#define ANOMALY_05000327 (__SILICON_REVISION__ < 1)
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
-#define ANOMALY_05000328 (1)
+#define ANOMALY_05000328 (__SILICON_REVISION__ < 1)
 /* Synchronous Burst Flash Boot Mode Is Not Functional */
-#define ANOMALY_05000329 (1)
+#define ANOMALY_05000329 (__SILICON_REVISION__ < 1)
 /* Host DMA Boot Mode Is Not Functional */
-#define ANOMALY_05000330 (1)
+#define ANOMALY_05000330 (__SILICON_REVISION__ < 1)
 /* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */
-#define ANOMALY_05000334 (1)
+#define ANOMALY_05000334 (__SILICON_REVISION__ < 1)
 /* Inadequate Rotary Debounce Logic Duration */
-#define ANOMALY_05000335 (1)
+#define ANOMALY_05000335 (__SILICON_REVISION__ < 1)
 /* Phantom Interrupt Occurs After First Configuration of Host DMA Port */
-#define ANOMALY_05000336 (1)
+#define ANOMALY_05000336 (__SILICON_REVISION__ < 1)
 /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
-#define ANOMALY_05000337 (1)
+#define ANOMALY_05000337 (__SILICON_REVISION__ < 1)
 /* Slave-Mode SPI0 MISO Failure With CPHA = 0 */
-#define ANOMALY_05000338 (1)
+#define ANOMALY_05000338 (__SILICON_REVISION__ < 1)
 /* If Memory Reads Are Enabled on SDH or HOSTDP, Other DMAC1 Peripherals Cannot Read */
-#define ANOMALY_05000340 (1)
+#define ANOMALY_05000340 (__SILICON_REVISION__ < 1)
 /* Boot Host Wait (HWAIT) and Boot Host Wait Alternate (HWAITA) Signals Are Swapped */
-#define ANOMALY_05000344 (1)
+#define ANOMALY_05000344 (__SILICON_REVISION__ < 1)
 /* USB Calibration Value Is Not Intialized */
-#define ANOMALY_05000346 (1)
+#define ANOMALY_05000346 (__SILICON_REVISION__ < 1)
 /* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */
-#define ANOMALY_05000347 (1)
+#define ANOMALY_05000347 (__SILICON_REVISION__ < 1)
 /* Data Lost when Core Reads SDH Data FIFO */
-#define ANOMALY_05000349 (1)
+#define ANOMALY_05000349 (__SILICON_REVISION__ < 1)
 /* PLL Status Register Is Inaccurate */
-#define ANOMALY_05000351 (1)
+#define ANOMALY_05000351 (__SILICON_REVISION__ < 1)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* External Memory Read Access Hangs Core With PLL Bypass */
+#define ANOMALY_05000360 (1)
+/* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */
+#define ANOMALY_05000365 (1)
+/* Addressing Conflict between Boot ROM and Asynchronous Memory */
+#define ANOMALY_05000369 (1)
+/* Mobile DDR Operation Not Functional */
+#define ANOMALY_05000377 (1)
+/* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
+#define ANOMALY_05000378 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index f21a1620e6bd..3770aa38ee9f 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -186,7 +186,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 
         if (uart->rts_pin >= 0) {
                 gpio_request(uart->rts_pin, DRIVER_NAME);
-                gpio_direction_output(uart->rts_pin);
+                gpio_direction_output(uart->rts_pin, 0);
         }
 #endif
 }
diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
index aefab3f618c1..19ddcd83c71f 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
@@ -244,39 +244,6 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
 #define bfin_read_TWI0_RCV_DATA16()             bfin_read16(TWI0_RCV_DATA16)
 #define bfin_write_TWI0_RCV_DATA16(val)         bfin_write16(TWI0_RCV_DATA16, val)
 
-#define bfin_read_TWI_CLKDIV()                  bfin_read16(TWI0_CLKDIV)
-#define bfin_write_TWI_CLKDIV(val)              bfin_write16(TWI0_CLKDIV, val)
-#define bfin_read_TWI_CONTROL()                 bfin_read16(TWI0_CONTROL)
-#define bfin_write_TWI_CONTROL(val)             bfin_write16(TWI0_CONTROL, val)
-#define bfin_read_TWI_SLAVE_CTRL()              bfin_read16(TWI0_SLAVE_CTRL)
-#define bfin_write_TWI_SLAVE_CTRL(val)          bfin_write16(TWI0_SLAVE_CTRL, val)
-#define bfin_read_TWI_SLAVE_STAT()              bfin_read16(TWI0_SLAVE_STAT)
-#define bfin_write_TWI_SLAVE_STAT(val)          bfin_write16(TWI0_SLAVE_STAT, val)
-#define bfin_read_TWI_SLAVE_ADDR()              bfin_read16(TWI0_SLAVE_ADDR)
-#define bfin_write_TWI_SLAVE_ADDR(val)          bfin_write16(TWI0_SLAVE_ADDR, val)
-#define bfin_read_TWI_MASTER_CTL()              bfin_read16(TWI0_MASTER_CTRL)
-#define bfin_write_TWI_MASTER_CTL(val)          bfin_write16(TWI0_MASTER_CTRL, val)
-#define bfin_read_TWI_MASTER_STAT()             bfin_read16(TWI0_MASTER_STAT)
-#define bfin_write_TWI_MASTER_STAT(val)         bfin_write16(TWI0_MASTER_STAT, val)
-#define bfin_read_TWI_MASTER_ADDR()             bfin_read16(TWI0_MASTER_ADDR)
-#define bfin_write_TWI_MASTER_ADDR(val)         bfin_write16(TWI0_MASTER_ADDR, val)
-#define bfin_read_TWI_INT_STAT()                bfin_read16(TWI0_INT_STAT)
-#define bfin_write_TWI_INT_STAT(val)            bfin_write16(TWI0_INT_STAT, val)
-#define bfin_read_TWI_INT_MASK()                bfin_read16(TWI0_INT_MASK)
-#define bfin_write_TWI_INT_MASK(val)            bfin_write16(TWI0_INT_MASK, val)
-#define bfin_read_TWI_FIFO_CTL()                bfin_read16(TWI0_FIFO_CTRL)
-#define bfin_write_TWI_FIFO_CTL(val)            bfin_write16(TWI0_FIFO_CTRL, val)
-#define bfin_read_TWI_FIFO_STAT()               bfin_read16(TWI0_FIFO_STAT)
-#define bfin_write_TWI_FIFO_STAT(val)           bfin_write16(TWI0_FIFO_STAT, val)
-#define bfin_read_TWI_XMT_DATA8()               bfin_read16(TWI0_XMT_DATA8)
-#define bfin_write_TWI_XMT_DATA8(val)           bfin_write16(TWI0_XMT_DATA8, val)
-#define bfin_read_TWI_XMT_DATA16()              bfin_read16(TWI0_XMT_DATA16)
-#define bfin_write_TWI_XMT_DATA16(val)          bfin_write16(TWI0_XMT_DATA16, val)
-#define bfin_read_TWI_RCV_DATA8()               bfin_read16(TWI0_RCV_DATA8)
-#define bfin_write_TWI_RCV_DATA8(val)           bfin_write16(TWI0_RCV_DATA8, val)
-#define bfin_read_TWI_RCV_DATA16()              bfin_read16(TWI0_RCV_DATA16)
-#define bfin_write_TWI_RCV_DATA16(val)          bfin_write16(TWI0_RCV_DATA16, val)
-
 /* SPORT0 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 bfin_read_()rocessors */
 
 /* SPORT1 Registers */
diff --git a/include/asm-blackfin/mach-bf548/defBF542.h b/include/asm-blackfin/mach-bf548/defBF542.h
index 32d07130200c..a7c809f29ede 100644
--- a/include/asm-blackfin/mach-bf548/defBF542.h
+++ b/include/asm-blackfin/mach-bf548/defBF542.h
@@ -432,8 +432,8 @@
 
 #define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
 #define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIMEOUT  0x4        /* CMD Time Out */
-#define               DAT_TIMEOUT  0x8        /* Data Time Out */
+#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
+#define               DAT_TIME_OUT  0x8        /* Data Time Out */
 #define               TX_UNDERRUN  0x10       /* Transmit Underrun */
 #define                RX_OVERRUN  0x20       /* Receive Overrun */
 #define              CMD_RESP_END  0x40       /* CMD Response End */
diff --git a/include/asm-blackfin/mach-bf548/defBF548.h b/include/asm-blackfin/mach-bf548/defBF548.h
index ecbca952985c..e46f56891e6a 100644
--- a/include/asm-blackfin/mach-bf548/defBF548.h
+++ b/include/asm-blackfin/mach-bf548/defBF548.h
@@ -1095,8 +1095,8 @@
 
 #define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
 #define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIMEOUT  0x4        /* CMD Time Out */
-#define               DAT_TIMEOUT  0x8        /* Data Time Out */
+#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
+#define               DAT_TIME_OUT  0x8        /* Data Time Out */
 #define               TX_UNDERRUN  0x10       /* Transmit Underrun */
 #define                RX_OVERRUN  0x20       /* Receive Overrun */
 #define              CMD_RESP_END  0x40       /* CMD Response End */
diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h
index 319a48590c9c..08f90c21fe8a 100644
--- a/include/asm-blackfin/mach-bf548/defBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h
@@ -1772,17 +1772,36 @@
 #define                       TRP  0x3c0000   /* Pre charge-to-active command period */
 #define                      TRAS  0x3c00000  /* Min Active-to-pre charge time */
 #define                       TRC  0x3c000000 /* Active-to-active time */
+#define DDR_TRAS(x)             ((x<<22)&TRAS)  /* DDR tRAS = (1~15) cycles */
+#define DDR_TRP(x)              ((x<<18)&TRP)   /* DDR tRP = (1~15) cycles */
+#define DDR_TRC(x)              ((x<<26)&TRC)   /* DDR tRC = (1~15) cycles */
+#define DDR_TRFC(x)             ((x<<14)&TRFC)  /* DDR tRFC = (1~15) cycles */
+#define DDR_TREFI(x)            (x&TREFI)       /* DDR tRFC = (1~15) cycles */
 
 /* Bit masks for EBIU_DDRCTL1 */
 
 #define                      TRCD  0xf        /* Active-to-Read/write delay */
-#define                       MRD  0xf0       /* Mode register set to active */
+#define                      TMRD  0xf0       /* Mode register set to active */
 #define                       TWR  0x300      /* Write Recovery time */
 #define               DDRDATWIDTH  0x3000     /* DDR data width */
 #define                  EXTBANKS  0xc000     /* External banks */
 #define               DDRDEVWIDTH  0x30000    /* DDR device width */
 #define                DDRDEVSIZE  0xc0000    /* DDR device size */
-#define                     TWWTR  0xf0000000 /* Write-to-read delay */
+#define                      TWTR  0xf0000000 /* Write-to-read delay */
+#define DDR_TWTR(x)             ((x<<28)&TWTR)  /* DDR tWTR = (1~15) cycles */
+#define DDR_TMRD(x)             ((x<<4)&TMRD)   /* DDR tMRD = (1~15) cycles */
+#define DDR_TWR(x)              ((x<<8)&TWR)    /* DDR tWR = (1~15) cycles */
+#define DDR_TRCD(x)             (x&TRCD)        /* DDR tRCD = (1~15) cycles */
+#define DDR_DATWIDTH            0x2000          /* DDR data width */
+#define EXTBANK_1               0               /* 1 external bank */
+#define EXTBANK_2               0x4000          /* 2 external banks */
+#define DEVSZ_64                0x40000         /* DDR External Bank Size = 64MB */
+#define DEVSZ_128               0x80000         /* DDR External Bank Size = 128MB */
+#define DEVSZ_256               0xc0000         /* DDR External Bank Size = 256MB */
+#define DEVSZ_512               0               /* DDR External Bank Size = 512MB */
+#define DEVWD_4                 0               /* DDR Device Width = 4 Bits    */
+#define DEVWD_8                 0x10000         /* DDR Device Width = 8 Bits    */
+#define DEVWD_16                0x20000         /* DDR Device Width = 16 Bits    */
 
 /* Bit masks for EBIU_DDRCTL2 */
 
@@ -1790,6 +1809,10 @@
 #define                CASLATENCY  0x70       /* CAS latency */
 #define                  DLLRESET  0x100      /* DLL Reset */
 #define                      REGE  0x1000     /* Register mode enable */
+#define CL_1_5                  0x50            /* DDR CAS Latency = 1.5 cycles */
+#define CL_2                    0x20            /* DDR CAS Latency = 2 cycles */
+#define CL_2_5                  0x60            /* DDR CAS Latency = 2.5 cycles */
+#define CL_3                    0x30            /* DDR CAS Latency = 3 cycles */
 
 /* Bit masks for EBIU_DDRCTL3 */
 
@@ -2257,6 +2280,10 @@
 
 #define                      CSEL  0x30       /* Core Select */
 #define                      SSEL  0xf        /* System Select */
+#define                 CSEL_DIV1       0x0000  /* CCLK = VCO / 1 */
+#define                 CSEL_DIV2       0x0010  /* CCLK = VCO / 2 */
+#define                 CSEL_DIV4       0x0020  /* CCLK = VCO / 4 */
+#define                 CSEL_DIV8       0x0030  /* CCLK = VCO / 8 */
 
 /* Bit masks for PLL_CTL */
 
diff --git a/include/asm-blackfin/mach-bf548/irq.h b/include/asm-blackfin/mach-bf548/irq.h
index 9fb7bc5399a8..c34507a3f1df 100644
--- a/include/asm-blackfin/mach-bf548/irq.h
+++ b/include/asm-blackfin/mach-bf548/irq.h
@@ -88,7 +88,7 @@ Events         (highest priority)  EMU         0
 #define IRQ_PINT1               BFIN_IRQ(20)    /* PINT1 Interrupt */
 #define IRQ_MDMAS0              BFIN_IRQ(21)    /* MDMA Stream 0 Interrupt */
 #define IRQ_MDMAS1              BFIN_IRQ(22)    /* MDMA Stream 1 Interrupt */
-#define IRQ_WATCHDOG            BFIN_IRQ(23)    /* Watchdog Interrupt */
+#define IRQ_WATCH               BFIN_IRQ(23)    /* Watchdog Interrupt */
 #define IRQ_DMAC1_ERROR         BFIN_IRQ(24)    /* DMAC1 Status (Error) Interrupt */
 #define IRQ_SPORT2_ERROR        BFIN_IRQ(25)    /* SPORT2 Error Interrupt */
 #define IRQ_SPORT3_ERROR        BFIN_IRQ(26)    /* SPORT3 Error Interrupt */
@@ -406,7 +406,7 @@ Events         (highest priority)  EMU         0
 #define IRQ_PINT1_POS           16
 #define IRQ_MDMAS0_POS          20
 #define IRQ_MDMAS1_POS          24
-#define IRQ_WATCHDOG_POS        28
+#define IRQ_WATCH_POS           28
 
 /* IAR3 BIT FIELDS */
 #define IRQ_DMAC1_ERR_POS       0
diff --git a/include/asm-blackfin/mach-bf548/mem_init.h b/include/asm-blackfin/mach-bf548/mem_init.h
index 0cb279e973d7..befc2903d5a5 100644
--- a/include/asm-blackfin/mach-bf548/mem_init.h
+++ b/include/asm-blackfin/mach-bf548/mem_init.h
@@ -28,8 +28,68 @@
  * If not, write to the Free Software Foundation,
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
+#define MIN_DDR_SCLK(x) (x*(CONFIG_SCLK_HZ/1000/1000)/1000 + 1)
+
+#if (CONFIG_MEM_MT46V32M16_6T)
+#define DDR_SIZE        DEVSZ_512
+#define DDR_WIDTH       DEVWD_16
+
+#define DDR_tRC         DDR_TRC(MIN_DDR_SCLK(60))
+#define DDR_tRAS        DDR_TRAS(MIN_DDR_SCLK(42))
+#define DDR_tRP         DDR_TRP(MIN_DDR_SCLK(15))
+#define DDR_tRFC        DDR_TRFC(MIN_DDR_SCLK(72))
+#define DDR_tREFI       DDR_TREFI(MIN_DDR_SCLK(7800))
+
+#define DDR_tRCD        DDR_TRCD(MIN_DDR_SCLK(15))
+#define DDR_tWTR        DDR_TWTR(1)
+#define DDR_tMRD        DDR_TMRD(MIN_DDR_SCLK(12))
+#define DDR_tWR         DDR_TWR(MIN_DDR_SCLK(15))
+#endif
+
+#if (CONFIG_MEM_MT46V32M16_5B)
+#define DDR_SIZE        DEVSZ_512
+#define DDR_WIDTH       DEVWD_16
+
+#define DDR_tRC         DDR_TRC(MIN_DDR_SCLK(55))
+#define DDR_tRAS        DDR_TRAS(MIN_DDR_SCLK(40))
+#define DDR_tRP         DDR_TRP(MIN_DDR_SCLK(15))
+#define DDR_tRFC        DDR_TRFC(MIN_DDR_SCLK(70))
+#define DDR_tREFI       DDR_TREFI(MIN_DDR_SCLK(7800))
+
+#define DDR_tRCD        DDR_TRCD(MIN_DDR_SCLK(15))
+#define DDR_tWTR        DDR_TWTR(2)
+#define DDR_tMRD        DDR_TMRD(MIN_DDR_SCLK(10))
+#define DDR_tWR         DDR_TWR(MIN_DDR_SCLK(15))
+#endif
+
+#if (CONFIG_MEM_GENERIC_BOARD)
+#define DDR_SIZE        DEVSZ_512
+#define DDR_WIDTH       DEVWD_16
+
+#define DDR_tRCD        DDR_TRCD(3)
+#define DDR_tWTR        DDR_TWTR(2)
+#define DDR_tWR         DDR_TWR(2)
+#define DDR_tMRD        DDR_TMRD(2)
+#define DDR_tRP         DDR_TRP(3)
+#define DDR_tRAS        DDR_TRAS(7)
+#define DDR_tRC         DDR_TRC(10)
+#define DDR_tRFC        DDR_TRFC(12)
+#define DDR_tREFI       DDR_TREFI(1288)
+#endif
+
+#if (CONFIG_SCLK_HZ <= 133333333)
+#define DDR_CL          CL_2
+#elif (CONFIG_SCLK_HZ <= 166666666)
+#define DDR_CL          CL_2_5
+#else
+#define DDR_CL          CL_3
+#endif
+
+#define mem_DDRCTL0     (DDR_tRP | DDR_tRAS | DDR_tRC | DDR_tRFC | DDR_tREFI)
+#define mem_DDRCTL1     (DDR_DATWIDTH | EXTBANK_1 | DDR_SIZE | DDR_WIDTH | DDR_tWTR \
+                        | DDR_tMRD | DDR_tWR | DDR_tRCD)
+#define mem_DDRCTL2     DDR_CL
 
-#if (CONFIG_MEM_MT46V32M16)
 
 #if defined CONFIG_CLKIN_HALF
 #define CLKIN_HALF       1
diff --git a/include/asm-blackfin/mach-bf548/portmux.h b/include/asm-blackfin/mach-bf548/portmux.h
index 6b485120015f..8177a567dcdb 100644
--- a/include/asm-blackfin/mach-bf548/portmux.h
+++ b/include/asm-blackfin/mach-bf548/portmux.h
@@ -1,6 +1,8 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
+#define MAX_RESOURCES   MAX_BLACKFIN_GPIOS
+
 #define P_SPORT2_TFS    (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0))
 #define P_SPORT2_DTSEC  (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0))
 #define P_SPORT2_DTPRI  (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0))
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h
index bed956456884..0c1d46193939 100644
--- a/include/asm-blackfin/mach-bf561/anomaly.h
+++ b/include/asm-blackfin/mach-bf561/anomaly.h
@@ -7,7 +7,7 @@
  */
 
 /* This file shoule be up to date with:
- *  - Revision N, March 28, 2007; ADSP-BF561 Silicon Anomaly List
+ *  - Revision O, 11/15/2007; ADSP-BF561 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -15,7 +15,7 @@
 
 /* We do not support 0.1, 0.2, or 0.4 silicon - sorry */
 #if __SILICON_REVISION__ < 3 || __SILICON_REVISION__ == 4
-# error Kernel will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4
+# error will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4
 #endif
 
 /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
@@ -208,6 +208,8 @@
 #define ANOMALY_05000275 (__SILICON_REVISION__ > 2)
 /* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
 #define ANOMALY_05000276 (__SILICON_REVISION__ < 5)
+/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */
+#define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
 /* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (__SILICON_REVISION__ < 5)
 /* False Hardware Error Exception When ISR Context Is Not Restored */
@@ -246,6 +248,18 @@
 #define ANOMALY_05000332 (__SILICON_REVISION__ < 5)
 /* Flag Data Register Writes One SCLK Cycle After Edge Is Detected May Clear Interrupt Status */
 #define ANOMALY_05000333 (__SILICON_REVISION__ < 5)
+/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available on Older Silicon) */
+#define ANOMALY_05000339 (__SILICON_REVISION__ < 5)
+/* Memory DMA FIFO Causes Throughput Degradation on Writes to External Memory */
+#define ANOMALY_05000343 (__SILICON_REVISION__ < 5)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* Conflicting Column Address Widths Causes SDRAM Errors */
+#define ANOMALY_05000362 (1)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000158 (0)
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
index 69b9f8e120e9..7871d4313f49 100644
--- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
@@ -111,7 +111,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart)
         }
         if (uart->rts_pin >= 0) {
                 gpio_request(uart->rts_pin, DRIVER_NAME);
-                gpio_direction_input(uart->rts_pin);
+                gpio_direction_input(uart->rts_pin, 0);
         }
 #endif
 }
diff --git a/include/asm-blackfin/mach-bf561/portmux.h b/include/asm-blackfin/mach-bf561/portmux.h
index 132ad31665e3..a6ee8206efb6 100644
--- a/include/asm-blackfin/mach-bf561/portmux.h
+++ b/include/asm-blackfin/mach-bf561/portmux.h
@@ -1,6 +1,8 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
+#define MAX_RESOURCES   MAX_BLACKFIN_GPIOS
+
 #define P_PPI0_CLK      (P_DONTCARE)
 #define P_PPI0_FS1      (P_DONTCARE)
 #define P_PPI0_FS2      (P_DONTCARE)
diff --git a/include/asm-blackfin/mmu.h b/include/asm-blackfin/mmu.h
index 11d52f1167d0..757e43906ed4 100644
--- a/include/asm-blackfin/mmu.h
+++ b/include/asm-blackfin/mmu.h
@@ -24,7 +24,9 @@ typedef struct {
         unsigned long   exec_fdpic_loadmap;
         unsigned long   interp_fdpic_loadmap;
 #endif
-
+#ifdef CONFIG_MPU
+        unsigned long *page_rwx_mask;
+#endif
 } mm_context_t;
 
 #endif
diff --git a/include/asm-blackfin/mmu_context.h b/include/asm-blackfin/mmu_context.h
index c5c71a6aaf19..b5eb67596ad5 100644
--- a/include/asm-blackfin/mmu_context.h
+++ b/include/asm-blackfin/mmu_context.h
@@ -30,9 +30,12 @@
 #ifndef __BLACKFIN_MMU_CONTEXT_H__
 #define __BLACKFIN_MMU_CONTEXT_H__
 
+#include <linux/gfp.h>
+#include <linux/sched.h>
 #include <asm/setup.h>
 #include <asm/page.h>
 #include <asm/pgalloc.h>
+#include <asm/cplbinit.h>
 
 extern void *current_l1_stack_save;
 extern int nr_l1stack_tasks;
@@ -50,6 +53,12 @@ static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 static inline int
 init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 {
+#ifdef CONFIG_MPU
+        unsigned long p = __get_free_pages(GFP_KERNEL, page_mask_order);
+        mm->context.page_rwx_mask = (unsigned long *)p;
+        memset(mm->context.page_rwx_mask, 0,
+               page_mask_nelts * 3 * sizeof(long));
+#endif
         return 0;
 }
 
@@ -73,6 +82,11 @@ static inline void destroy_context(struct mm_struct *mm)
                 sram_free(tmp->addr);
                 kfree(tmp);
         }
+#ifdef CONFIG_MPU
+        if (current_rwx_mask == mm->context.page_rwx_mask)
+                current_rwx_mask = NULL;
+        free_pages((unsigned long)mm->context.page_rwx_mask, page_mask_order);
+#endif
 }
 
 static inline unsigned long
@@ -106,9 +120,21 @@ activate_l1stack(struct mm_struct *mm, unsigned long sp_base)
 
 #define deactivate_mm(tsk,mm)   do { } while (0)
 
-static inline void activate_mm(struct mm_struct *prev_mm,
-                               struct mm_struct *next_mm)
+#define activate_mm(prev, next) switch_mm(prev, next, NULL)
+
+static inline void switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
+                             struct task_struct *tsk)
 {
+        if (prev_mm == next_mm)
+                return;
+#ifdef CONFIG_MPU
+        if (prev_mm->context.page_rwx_mask == current_rwx_mask) {
+                flush_switched_cplbs();
+                set_mask_dcplbs(next_mm->context.page_rwx_mask);
+        }
+#endif
+
+        /* L1 stack switching.  */
         if (!next_mm->context.l1_stack_save)
                 return;
         if (next_mm->context.l1_stack_save == current_l1_stack_save)
@@ -120,10 +146,36 @@ static inline void activate_mm(struct mm_struct *prev_mm,
         memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len);
 }
 
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-                             struct task_struct *tsk)
+#ifdef CONFIG_MPU
+static inline void protect_page(struct mm_struct *mm, unsigned long addr,
+                                unsigned long flags)
+{
+        unsigned long *mask = mm->context.page_rwx_mask;
+        unsigned long page = addr >> 12;
+        unsigned long idx = page >> 5;
+        unsigned long bit = 1 << (page & 31);
+
+        if (flags & VM_MAYREAD)
+                mask[idx] |= bit;
+        else
+                mask[idx] &= ~bit;
+        mask += page_mask_nelts;
+        if (flags & VM_MAYWRITE)
+                mask[idx] |= bit;
+        else
+                mask[idx] &= ~bit;
+        mask += page_mask_nelts;
+        if (flags & VM_MAYEXEC)
+                mask[idx] |= bit;
+        else
+                mask[idx] &= ~bit;
+}
+
+static inline void update_protections(struct mm_struct *mm)
 {
-        activate_mm(prev, next);
+        flush_switched_cplbs();
+        set_mask_dcplbs(mm->context.page_rwx_mask);
 }
+#endif
 
 #endif
diff --git a/include/asm-blackfin/traps.h b/include/asm-blackfin/traps.h
index ee1cbf73a9ab..f0e5f940d9ca 100644
--- a/include/asm-blackfin/traps.h
+++ b/include/asm-blackfin/traps.h
@@ -45,6 +45,10 @@
 #define VEC_CPLB_I_M    (44)
 #define VEC_CPLB_I_MHIT (45)
 #define VEC_ILL_RES     (46)    /* including unvalid supervisor mode insn */
+/* The hardware reserves (63) for future use - we use it to tell our
+ * normal exception handling code we have a hardware error
+ */
+#define VEC_HWERR       (63)
 
 #ifndef __ASSEMBLY__
 
diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h
index 2233f8f9314d..22a410b8003b 100644
--- a/include/asm-blackfin/uaccess.h
+++ b/include/asm-blackfin/uaccess.h
@@ -31,7 +31,7 @@ static inline void set_fs(mm_segment_t fs)
 #define VERIFY_READ     0
 #define VERIFY_WRITE    1
 
-#define access_ok(type,addr,size) _access_ok((unsigned long)(addr),(size))
+#define access_ok(type, addr, size) _access_ok((unsigned long)(addr), (size))
 
 static inline int is_in_rom(unsigned long addr)
 {
diff --git a/include/asm-blackfin/unistd.h b/include/asm-blackfin/unistd.h
index 07ffe8b718c5..e98167358d26 100644
--- a/include/asm-blackfin/unistd.h
+++ b/include/asm-blackfin/unistd.h
@@ -369,8 +369,9 @@
 #define __NR_set_robust_list    354
 #define __NR_get_robust_list    355
 #define __NR_fallocate          356
+#define __NR_semtimedop         357
 
-#define __NR_syscall            357
+#define __NR_syscall            358
 #define NR_syscalls             __NR_syscall
 
 /* Old optional stuff no one actually uses */