sky2: FE+ vlan workaround

The FE+ workaround means the driver can no longer trust the status register
to indicate VLAN tagged frames.  The fix for this is to just disable VLAN
acceleration for that chip version. Tested and works fine.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 6 insertions, 2 deletions

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index a3de0b6127eb..3bfc9d3e3c6e 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -3970,8 +3970,12 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
                 dev->features |= NETIF_F_HIGHDMA;
 
 #ifdef SKY2_VLAN_TAG_USED
-        dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-        dev->vlan_rx_register = sky2_vlan_rx_register;
+        /* The workaround for FE+ status conflicts with VLAN tag detection. */
+        if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
+              sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) {
+                dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+                dev->vlan_rx_register = sky2_vlan_rx_register;
+        }
 #endif
 
         /* read the mac address */