[MIPS] i8253 PIT clocksource and clockevent drivers

Derived from the i386 variant with a few x86 complexities chopped off.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 files changed, 280 insertions, 5 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d8c905840af5..f943736541cb 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -65,6 +65,7 @@ config MIPS_COBALT
         bool "Cobalt Server"
         select DMA_NONCOHERENT
         select HW_HAS_PCI
+        select I8253
         select I8259
         select IRQ_CPU
         select IRQ_GT641XX
@@ -112,6 +113,7 @@ config MACH_JAZZ
         select ARCH_MAY_HAVE_PC_FDC
         select GENERIC_ISA_DMA
         select IRQ_CPU
+        select I8253
         select I8259
         select ISA
         select PCSPEAKER
@@ -201,6 +203,7 @@ config MIPS_MALTA
         select GENERIC_ISA_DMA
         select IRQ_CPU
         select HW_HAS_PCI
+        select I8253
         select I8259
         select MIPS_BOARDS_GEN
         select MIPS_BONITO64
@@ -334,6 +337,7 @@ config QEMU
         select DMA_COHERENT
         select GENERIC_ISA_DMA
         select HAVE_STD_PC_SERIAL_PORT
+        select I8253
         select I8259
         select IRQ_CPU
         select ISA
@@ -362,6 +366,7 @@ config SGI_IP22
         select BOOT_ELF32
         select DMA_NONCOHERENT
         select HW_HAS_EISA
+        select I8253
         select IP22_CPU_SCACHE
         select IRQ_CPU
         select GENERIC_ISA_DMA_SUPPORT_BROKEN
@@ -534,6 +539,7 @@ config SNI_RM
         select HW_HAS_EISA
         select HW_HAS_PCI
         select IRQ_CPU
+        select I8253
         select I8259
         select ISA
         select PCSPEAKER
@@ -1893,6 +1899,9 @@ config MMU
         bool
         default y
 
+config I8253
+        bool
+
 config PCSPEAKER
         bool
 
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index 5d2e8790b28b..345e4ae998df 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -15,6 +15,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/time.h>
+#include <asm/i8253.h>
 #include <asm/io.h>
 #include <asm/reboot.h>
 #include <asm/gt64120.h>
@@ -84,6 +85,11 @@ static struct resource cobalt_reserved_resources[] = {
         },
 };
 
+void __init plat_time_init(void)
+{
+        setup_pit_timer();
+}
+
 void __init plat_mem_setup(void)
 {
         int i;
diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c
index fa890df36589..2a7ec08b6bad 100644
--- a/arch/mips/jazz/setup.c
+++ b/arch/mips/jazz/setup.c
@@ -25,6 +25,7 @@
 #include <linux/serial_8250.h>
 
 #include <asm/bootinfo.h>
+#include <asm/i8253.h>
 #include <asm/irq.h>
 #include <asm/jazz.h>
 #include <asm/jazzdma.h>
@@ -63,6 +64,11 @@ static struct resource jazz_io_resources[] = {
         }
 };
 
+void __init plat_time_init(void)
+{
+        setup_pit_timer();
+}
+
 void __init plat_mem_setup(void)
 {
         int i;
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 7851b4b447d0..a2689f93c160 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -65,6 +65,7 @@ obj-$(CONFIG_PROC_FS)		+= proc.o
 
 obj-$(CONFIG_64BIT)             += cpu-bugs64.o
 
+obj-$(CONFIG_I8253)             += i8253.o
 obj-$(CONFIG_PCSPEAKER)         += pcspeaker.o
 
 obj-$(CONFIG_KEXEC)             += machine_kexec.o relocate_kernel.o
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
new file mode 100644
index 000000000000..5d9830df3595
--- /dev/null
+++ b/arch/mips/kernel/i8253.c
@@ -0,0 +1,213 @@
+/*
+ * i8253.c  8253/PIT functions
+ *
+ */
+#include <linux/clockchips.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+
+#include <asm/delay.h>
+#include <asm/i8253.h>
+#include <asm/io.h>
+
+static DEFINE_SPINLOCK(i8253_lock);
+
+/*
+ * Initialize the PIT timer.
+ *
+ * This is also called after resume to bring the PIT into operation again.
+ */
+static void init_pit_timer(enum clock_event_mode mode,
+                           struct clock_event_device *evt)
+{
+        unsigned long flags;
+
+        spin_lock_irqsave(&i8253_lock, flags);
+
+        switch(mode) {
+        case CLOCK_EVT_MODE_PERIODIC:
+                /* binary, mode 2, LSB/MSB, ch 0 */
+                outb_p(0x34, PIT_MODE);
+                outb_p(LATCH & 0xff , PIT_CH0); /* LSB */
+                outb(LATCH >> 8 , PIT_CH0);     /* MSB */
+                break;
+
+        case CLOCK_EVT_MODE_SHUTDOWN:
+        case CLOCK_EVT_MODE_UNUSED:
+                if (evt->mode == CLOCK_EVT_MODE_PERIODIC ||
+                    evt->mode == CLOCK_EVT_MODE_ONESHOT) {
+                        outb_p(0x30, PIT_MODE);
+                        outb_p(0, PIT_CH0);
+                        outb_p(0, PIT_CH0);
+                }
+                break;
+
+        case CLOCK_EVT_MODE_ONESHOT:
+                /* One shot setup */
+                outb_p(0x38, PIT_MODE);
+                break;
+
+        case CLOCK_EVT_MODE_RESUME:
+                /* Nothing to do here */
+                break;
+        }
+        spin_unlock_irqrestore(&i8253_lock, flags);
+}
+
+/*
+ * Program the next event in oneshot mode
+ *
+ * Delta is given in PIT ticks
+ */
+static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
+{
+        unsigned long flags;
+
+        spin_lock_irqsave(&i8253_lock, flags);
+        outb_p(delta & 0xff , PIT_CH0); /* LSB */
+        outb(delta >> 8 , PIT_CH0);     /* MSB */
+        spin_unlock_irqrestore(&i8253_lock, flags);
+
+        return 0;
+}
+
+/*
+ * On UP the PIT can serve all of the possible timer functions. On SMP systems
+ * it can be solely used for the global tick.
+ *
+ * The profiling and update capabilites are switched off once the local apic is
+ * registered. This mechanism replaces the previous #ifdef LOCAL_APIC -
+ * !using_apic_timer decisions in do_timer_interrupt_hook()
+ */
+struct clock_event_device pit_clockevent = {
+        .name           = "pit",
+        .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+        .set_mode       = init_pit_timer,
+        .set_next_event = pit_next_event,
+        .shift          = 32,
+        .irq            = 0,
+};
+
+irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+        pit_clockevent.event_handler(&pit_clockevent);
+
+        return IRQ_HANDLED;
+}
+
+static struct irqaction irq0  = {
+        .handler = timer_interrupt,
+        .flags = IRQF_DISABLED | IRQF_NOBALANCING,
+        .mask = CPU_MASK_NONE,
+        .name = "timer"
+};
+
+/*
+ * Initialize the conversion factor and the min/max deltas of the clock event
+ * structure and register the clock event source with the framework.
+ */
+void __init setup_pit_timer(void)
+{
+        /*
+         * Start pit with the boot cpu mask and make it global after the
+         * IO_APIC has been initialized.
+         */
+        pit_clockevent.cpumask = cpumask_of_cpu(0);
+        pit_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, 32);
+        pit_clockevent.max_delta_ns =
+                clockevent_delta2ns(0x7FFF, &pit_clockevent);
+        pit_clockevent.min_delta_ns =
+                clockevent_delta2ns(0xF, &pit_clockevent);
+        clockevents_register_device(&pit_clockevent);
+
+        irq0.mask = cpumask_of_cpu(0);
+        setup_irq(0, &irq0);
+}
+
+/*
+ * Since the PIT overflows every tick, its not very useful
+ * to just read by itself. So use jiffies to emulate a free
+ * running counter:
+ */
+static cycle_t pit_read(void)
+{
+        unsigned long flags;
+        int count;
+        u32 jifs;
+        static int old_count;
+        static u32 old_jifs;
+
+        spin_lock_irqsave(&i8253_lock, flags);
+        /*
+         * Although our caller may have the read side of xtime_lock,
+         * this is now a seqlock, and we are cheating in this routine
+         * by having side effects on state that we cannot undo if
+         * there is a collision on the seqlock and our caller has to
+         * retry.  (Namely, old_jifs and old_count.)  So we must treat
+         * jiffies as volatile despite the lock.  We read jiffies
+         * before latching the timer count to guarantee that although
+         * the jiffies value might be older than the count (that is,
+         * the counter may underflow between the last point where
+         * jiffies was incremented and the point where we latch the
+         * count), it cannot be newer.
+         */
+        jifs = jiffies;
+        outb_p(0x00, PIT_MODE); /* latch the count ASAP */
+        count = inb_p(PIT_CH0); /* read the latched count */
+        count |= inb_p(PIT_CH0) << 8;
+
+        /* VIA686a test code... reset the latch if count > max + 1 */
+        if (count > LATCH) {
+                outb_p(0x34, PIT_MODE);
+                outb_p(LATCH & 0xff, PIT_CH0);
+                outb(LATCH >> 8, PIT_CH0);
+                count = LATCH - 1;
+        }
+
+        /*
+         * It's possible for count to appear to go the wrong way for a
+         * couple of reasons:
+         *
+         *  1. The timer counter underflows, but we haven't handled the
+         *     resulting interrupt and incremented jiffies yet.
+         *  2. Hardware problem with the timer, not giving us continuous time,
+         *     the counter does small "jumps" upwards on some Pentium systems,
+         *     (see c't 95/10 page 335 for Neptun bug.)
+         *
+         * Previous attempts to handle these cases intelligently were
+         * buggy, so we just do the simple thing now.
+         */
+        if (count > old_count && jifs == old_jifs) {
+                count = old_count;
+        }
+        old_count = count;
+        old_jifs = jifs;
+
+        spin_unlock_irqrestore(&i8253_lock, flags);
+
+        count = (LATCH - 1) - count;
+
+        return (cycle_t)(jifs * LATCH) + count;
+}
+
+static struct clocksource clocksource_pit = {
+        .name   = "pit",
+        .rating = 110,
+        .read   = pit_read,
+        .mask   = CLOCKSOURCE_MASK(32),
+        .mult   = 0,
+        .shift  = 20,
+};
+
+static int __init init_pit_clocksource(void)
+{
+        if (num_possible_cpus() > 1) /* PIT does not scale! */
+                return 0;
+
+        clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20);
+        return clocksource_register(&clocksource_pit);
+}
+arch_initcall(init_pit_clocksource);
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index cf55ecd96bf4..4fab3b2e8736 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -31,6 +31,7 @@
 #include <asm/mipsregs.h>
 #include <asm/mipsmtregs.h>
 #include <asm/hardirq.h>
+#include <asm/i8253.h>
 #include <asm/irq.h>
 #include <asm/div64.h>
 #include <asm/cpu.h>
@@ -141,6 +142,9 @@ void __init plat_time_init(void)
         cpu_khz = est_freq / 1000;
 
         mips_scroll_message();
+#ifdef CONFIG_I8253             /* Only Malta has a PIT */
+        setup_pit_timer();
+#endif
 }
 
 //static irqreturn_t mips_perf_interrupt(int irq, void *dev_id)
diff --git a/arch/mips/qemu/q-setup.c b/arch/mips/qemu/q-setup.c
index 89a207650ce9..23d34c1917c0 100644
--- a/arch/mips/qemu/q-setup.c
+++ b/arch/mips/qemu/q-setup.c
@@ -1,4 +1,6 @@
 #include <linux/init.h>
+
+#include <asm/i8253.h>
 #include <asm/io.h>
 #include <asm/time.h>
 
@@ -11,12 +13,9 @@ const char *get_system_type(void)
         return "Qemu";
 }
 
-void __init plat_timer_setup(struct irqaction *irq)
+void __init plat_time_init(void)
 {
-        /* set the clock to 100 Hz */
-        outb_p(0x34,0x43);              /* binary, mode 2, LSB/MSB, ch 0 */
-        outb_p(LATCH & 0xff , 0x40);    /* LSB */
-        outb(LATCH >> 8 , 0x40);        /* MSB */
+        setup_pit_timer();
 }
 
 void __init plat_mem_setup(void)
diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c
index a1df1f9e26fa..9b9bffd2e8fb 100644
--- a/arch/mips/sgi-ip22/ip22-time.c
+++ b/arch/mips/sgi-ip22/ip22-time.c
@@ -20,6 +20,7 @@
 
 #include <asm/cpu.h>
 #include <asm/mipsregs.h>
+#include <asm/i8253.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/time.h>
@@ -172,6 +173,9 @@ __init void plat_time_init(void)
                 (int) (r4k_tick % (500000 / HZ)));
 
         mips_hpt_frequency = r4k_tick * HZ;
+
+        if (ip22_is_fullhouse())
+                setup_pit_timer();
 }
 
 /* Generic SGI handler for (spurious) 8254 interrupts */
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
index 92452d677d8f..153f065434ea 100644
--- a/arch/mips/sni/time.c
+++ b/arch/mips/sni/time.c
@@ -2,6 +2,7 @@
 #include <linux/interrupt.h>
 #include <linux/time.h>
 
+#include <asm/i8253.h>
 #include <asm/sni.h>
 #include <asm/time.h>
 #include <asm-generic/rtc.h>
@@ -116,6 +117,8 @@ void __init plat_time_init(void)
                 (int) (r4k_tick % (500000 / HZ)));
 
         mips_hpt_frequency = r4k_tick * HZ;
+
+        setup_pit_timer();
 }
 
 /*
diff --git a/include/asm-mips/i8253.h b/include/asm-mips/i8253.h
new file mode 100644
index 000000000000..8f689d7df6b1
--- /dev/null
+++ b/include/asm-mips/i8253.h
@@ -0,0 +1,30 @@
+/*
+ *  Machine specific IO port address definition for generic.
+ *  Written by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_IO_PORTS_H
+#define _MACH_IO_PORTS_H
+
+/* i8253A PIT registers */
+#define PIT_MODE                0x43
+#define PIT_CH0                 0x40
+#define PIT_CH2                 0x42
+
+/* i8259A PIC registers */
+#define PIC_MASTER_CMD          0x20
+#define PIC_MASTER_IMR          0x21
+#define PIC_MASTER_ISR          PIC_MASTER_CMD
+#define PIC_MASTER_POLL         PIC_MASTER_ISR
+#define PIC_MASTER_OCW3         PIC_MASTER_ISR
+#define PIC_SLAVE_CMD           0xa0
+#define PIC_SLAVE_IMR           0xa1
+
+/* i8259A PIC related value */
+#define PIC_CASCADE_IR          2
+#define MASTER_ICW4_DEFAULT     0x01
+#define SLAVE_ICW4_DEFAULT      0x01
+#define PIC_ICW4_AEOI           2
+
+extern void setup_pit_timer(void);
+
+#endif /* !_MACH_IO_PORTS_H */