Input: atkbd - fix HANGEUL/HANJA keys

Make atkbd report HANGEUL/HANJA keys by default and use correct scan
codes for these keys (they were swapped). Also make sure their scancodes
reported as EV_MSC/MSC_SCAN events.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

2 files changed, 135 insertions, 79 deletions

diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index d82368bc46d0..6cb85dcbbc83 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -1075,10 +1075,12 @@ static int emulate_raw(struct vc_data *vc, unsigned int keycode,
                         put_queue(vc, 0x45 | up_flag);
                         return 0;
                 case KEY_HANGEUL:
-                        if (!up_flag) put_queue(vc, 0xf1);
+                        if (!up_flag)
+                                put_queue(vc, 0xf2);
                         return 0;
                 case KEY_HANJA:
-                        if (!up_flag) put_queue(vc, 0xf2);
+                        if (!up_flag)
+                                put_queue(vc, 0xf1);
                         return 0;
         }
 
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 1bf61f00cbd2..ffde8f86e0fb 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -55,7 +55,7 @@ static int atkbd_softraw = 1;
 module_param_named(softraw, atkbd_softraw, bool, 0);
 MODULE_PARM_DESC(softraw, "Use software generated rawmode");
 
-static int atkbd_scroll = 0;
+static int atkbd_scroll;
 module_param_named(scroll, atkbd_scroll, bool, 0);
 MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards");
 
@@ -150,8 +150,8 @@ static unsigned char atkbd_unxlate_table[128] = {
 #define ATKBD_RET_EMUL0         0xe0
 #define ATKBD_RET_EMUL1         0xe1
 #define ATKBD_RET_RELEASE       0xf0
-#define ATKBD_RET_HANGEUL       0xf1
-#define ATKBD_RET_HANJA         0xf2
+#define ATKBD_RET_HANJA         0xf1
+#define ATKBD_RET_HANGEUL       0xf2
 #define ATKBD_RET_ERR           0xff
 
 #define ATKBD_KEY_UNKNOWN         0
@@ -170,6 +170,13 @@ static unsigned char atkbd_unxlate_table[128] = {
 #define ATKBD_LED_EVENT_BIT     0
 #define ATKBD_REP_EVENT_BIT     1
 
+#define ATKBD_XL_ERR            0x01
+#define ATKBD_XL_BAT            0x02
+#define ATKBD_XL_ACK            0x04
+#define ATKBD_XL_NAK            0x08
+#define ATKBD_XL_HANGEUL        0x10
+#define ATKBD_XL_HANJA          0x20
+
 static struct {
         unsigned char keycode;
         unsigned char set2;
@@ -211,8 +218,7 @@ struct atkbd {
         unsigned char emul;
         unsigned char resend;
         unsigned char release;
-        unsigned char bat_xl;
-        unsigned char err_xl;
+        unsigned long xl_bit;
         unsigned int last;
         unsigned long time;
 
@@ -245,17 +251,65 @@ ATKBD_DEFINE_ATTR(set);
 ATKBD_DEFINE_ATTR(softrepeat);
 ATKBD_DEFINE_ATTR(softraw);
 
+static const unsigned int xl_table[] = {
+        ATKBD_RET_BAT, ATKBD_RET_ERR, ATKBD_RET_ACK,
+        ATKBD_RET_NAK, ATKBD_RET_HANJA, ATKBD_RET_HANGEUL,
+};
 
-static void atkbd_report_key(struct input_dev *dev, struct pt_regs *regs, int code, int value)
+/*
+ * Checks if we should mangle the scancode to extract 'release' bit
+ * in translated mode.
+ */
+static int atkbd_need_xlate(unsigned long xl_bit, unsigned char code)
 {
-        input_regs(dev, regs);
-        if (value == 3) {
-                input_report_key(dev, code, 1);
-                input_sync(dev);
-                input_report_key(dev, code, 0);
-        } else
-                input_event(dev, EV_KEY, code, value);
-        input_sync(dev);
+        int i;
+
+        if (code == ATKBD_RET_EMUL0 || code == ATKBD_RET_EMUL1)
+                return 0;
+
+        for (i = 0; i < ARRAY_SIZE(xl_table); i++)
+                if (code == xl_table[i])
+                        return test_bit(i, &xl_bit);
+
+        return 1;
+}
+
+/*
+ * Calculates new value of xl_bit so the driver can distinguish
+ * between make/break pair of scancodes for select keys and PS/2
+ * protocol responses.
+ */
+static void atkbd_calculate_xl_bit(struct atkbd *atkbd, unsigned char code)
+{
+        int i;
+
+        for (i = 0; i < ARRAY_SIZE(xl_table); i++) {
+                if (!((code ^ xl_table[i]) & 0x7f)) {
+                        if (code & 0x80)
+                                __clear_bit(i, &atkbd->xl_bit);
+                        else
+                                __set_bit(i, &atkbd->xl_bit);
+                        break;
+                }
+        }
+}
+
+/*
+ * Encode the scancode, 0xe0 prefix, and high bit into a single integer,
+ * keeping kernel 2.4 compatibility for set 2
+ */
+static unsigned int atkbd_compat_scancode(struct atkbd *atkbd, unsigned int code)
+{
+        if (atkbd->set == 3) {
+                if (atkbd->emul == 1)
+                        code |= 0x100;
+        } else {
+                code = (code & 0x7f) | ((code & 0x80) << 1);
+                if (atkbd->emul == 1)
+                        code |= 0x80;
+        }
+
+        return code;
 }
 
 /*
@@ -267,9 +321,11 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
                         unsigned int flags, struct pt_regs *regs)
 {
         struct atkbd *atkbd = serio_get_drvdata(serio);
+        struct input_dev *dev = atkbd->dev;
         unsigned int code = data;
-        int scroll = 0, hscroll = 0, click = -1;
+        int scroll = 0, hscroll = 0, click = -1, add_release_event = 0;
         int value;
+        unsigned char keycode;
 
 #ifdef ATKBD_DEBUG
         printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
@@ -298,25 +354,17 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
         if (!atkbd->enabled)
                 goto out;
 
-        input_event(atkbd->dev, EV_MSC, MSC_RAW, code);
+        input_event(dev, EV_MSC, MSC_RAW, code);
 
         if (atkbd->translated) {
 
-                if (atkbd->emul ||
-                    (code != ATKBD_RET_EMUL0 && code != ATKBD_RET_EMUL1 &&
-                     code != ATKBD_RET_HANGEUL && code != ATKBD_RET_HANJA &&
-                     (code != ATKBD_RET_ERR || atkbd->err_xl) &&
-                     (code != ATKBD_RET_BAT || atkbd->bat_xl))) {
+                if (atkbd->emul || atkbd_need_xlate(atkbd->xl_bit, code)) {
                         atkbd->release = code >> 7;
                         code &= 0x7f;
                 }
 
-                if (!atkbd->emul) {
-                     if ((code & 0x7f) == (ATKBD_RET_BAT & 0x7f))
-                        atkbd->bat_xl = !(data >> 7);
-                     if ((code & 0x7f) == (ATKBD_RET_ERR & 0x7f))
-                        atkbd->err_xl = !(data >> 7);
-                }
+                if (!atkbd->emul)
+                        atkbd_calculate_xl_bit(atkbd, data);
         }
 
         switch (code) {
@@ -333,47 +381,48 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
                 case ATKBD_RET_RELEASE:
                         atkbd->release = 1;
                         goto out;
-                case ATKBD_RET_HANGEUL:
-                        atkbd_report_key(atkbd->dev, regs, KEY_HANGEUL, 3);
+                case ATKBD_RET_ACK:
+                case ATKBD_RET_NAK:
+                        printk(KERN_WARNING "atkbd.c: Spurious %s on %s. "
+                               "Some program might be trying access hardware directly.\n",
+                               data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
                         goto out;
+                case ATKBD_RET_HANGEUL:
                 case ATKBD_RET_HANJA:
-                        atkbd_report_key(atkbd->dev, regs, KEY_HANJA, 3);
-                        goto out;
+                        /*
+                         * These keys do not report release and thus need to be
+                         * flagged properly
+                         */
+                        add_release_event = 1;
+                        break;
                 case ATKBD_RET_ERR:
                         printk(KERN_DEBUG "atkbd.c: Keyboard on %s reports too many keys pressed.\n", serio->phys);
                         goto out;
         }
 
-        if (atkbd->set != 3)
-                code = (code & 0x7f) | ((code & 0x80) << 1);
-        if (atkbd->emul) {
-                if (--atkbd->emul)
-                        goto out;
-                code |= (atkbd->set != 3) ? 0x80 : 0x100;
-        }
+        code = atkbd_compat_scancode(atkbd, code);
+
+        if (atkbd->emul && --atkbd->emul)
+                goto out;
+
+        keycode = atkbd->keycode[code];
 
-        if (atkbd->keycode[code] != ATKBD_KEY_NULL)
-                input_event(atkbd->dev, EV_MSC, MSC_SCAN, code);
+        if (keycode != ATKBD_KEY_NULL)
+                input_event(dev, EV_MSC, MSC_SCAN, code);
 
-        switch (atkbd->keycode[code]) {
+        switch (keycode) {
                 case ATKBD_KEY_NULL:
                         break;
                 case ATKBD_KEY_UNKNOWN:
-                        if (data == ATKBD_RET_ACK || data == ATKBD_RET_NAK) {
-                                printk(KERN_WARNING "atkbd.c: Spurious %s on %s. Some program, "
-                                       "like XFree86, might be trying access hardware directly.\n",
-                                       data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
-                        } else {
-                                printk(KERN_WARNING "atkbd.c: Unknown key %s "
-                                       "(%s set %d, code %#x on %s).\n",
-                                       atkbd->release ? "released" : "pressed",
-                                       atkbd->translated ? "translated" : "raw",
-                                       atkbd->set, code, serio->phys);
-                                printk(KERN_WARNING "atkbd.c: Use 'setkeycodes %s%02x <keycode>' "
-                                       "to make it known.\n",
-                                       code & 0x80 ? "e0" : "", code & 0x7f);
-                        }
-                        input_sync(atkbd->dev);
+                        printk(KERN_WARNING
+                               "atkbd.c: Unknown key %s (%s set %d, code %#x on %s).\n",
+                               atkbd->release ? "released" : "pressed",
+                               atkbd->translated ? "translated" : "raw",
+                               atkbd->set, code, serio->phys);
+                        printk(KERN_WARNING
+                               "atkbd.c: Use 'setkeycodes %s%02x <keycode>' to make it known.\n",
+                               code & 0x80 ? "e0" : "", code & 0x7f);
+                        input_sync(dev);
                         break;
                 case ATKBD_SCR_1:
                         scroll = 1 - atkbd->release * 2;
@@ -397,33 +446,35 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
                         hscroll = 1;
                         break;
                 default:
-                        value = atkbd->release ? 0 :
-                                (1 + (!atkbd->softrepeat && test_bit(atkbd->keycode[code], atkbd->dev->key)));
-
-                        switch (value) {        /* Workaround Toshiba laptop multiple keypress */
-                                case 0:
-                                        atkbd->last = 0;
-                                        break;
-                                case 1:
-                                        atkbd->last = code;
-                                        atkbd->time = jiffies + msecs_to_jiffies(atkbd->dev->rep[REP_DELAY]) / 2;
-                                        break;
-                                case 2:
-                                        if (!time_after(jiffies, atkbd->time) && atkbd->last == code)
-                                                value = 1;
-                                        break;
+                        if (atkbd->release) {
+                                value = 0;
+                                atkbd->last = 0;
+                        } else if (!atkbd->softrepeat && test_bit(keycode, dev->key)) {
+                                /* Workaround Toshiba laptop multiple keypress */
+                                value = time_before(jiffies, atkbd->time) && atkbd->last == code ? 1 : 2;
+                        } else {
+                                value = 1;
+                                atkbd->last = code;
+                                atkbd->time = jiffies + msecs_to_jiffies(dev->rep[REP_DELAY]) / 2;
                         }
 
-                        atkbd_report_key(atkbd->dev, regs, atkbd->keycode[code], value);
+                        input_regs(dev, regs);
+                        input_report_key(dev, keycode, value);
+                        input_sync(dev);
+
+                        if (value && add_release_event) {
+                                input_report_key(dev, keycode, 0);
+                                input_sync(dev);
+                        }
         }
 
         if (atkbd->scroll) {
-                input_regs(atkbd->dev, regs);
+                input_regs(dev, regs);
                 if (click != -1)
-                        input_report_key(atkbd->dev, BTN_MIDDLE, click);
-                input_report_rel(atkbd->dev, REL_WHEEL, scroll);
-                input_report_rel(atkbd->dev, REL_HWHEEL, hscroll);
-                input_sync(atkbd->dev);
+                        input_report_key(dev, BTN_MIDDLE, click);
+                input_report_rel(dev, REL_WHEEL, scroll);
+                input_report_rel(dev, REL_HWHEEL, hscroll);
+                input_sync(dev);
         }
 
         atkbd->release = 0;
@@ -764,6 +815,9 @@ static void atkbd_set_keycode_table(struct atkbd *atkbd)
                         for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++)
                                 atkbd->keycode[atkbd_scroll_keys[i].set2] = atkbd_scroll_keys[i].keycode;
         }
+
+        atkbd->keycode[atkbd_compat_scancode(atkbd, ATKBD_RET_HANGEUL)] = KEY_HANGUEL;
+        atkbd->keycode[atkbd_compat_scancode(atkbd, ATKBD_RET_HANJA)] = KEY_HANJA;
 }
 
 /*