Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Reverting c7afb48eb5147be9eb9789b4161462d246451ac2 since a better (but
more intrusive) fix is now merged upstream.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

76 files changed, 751 insertions, 331 deletions

diff --git a/Documentation/sound/alsa/Audiophile-Usb.txt b/Documentation/sound/alsa/Audiophile-Usb.txt
index 4692c8e77dc1..b535c2a198f8 100644
--- a/Documentation/sound/alsa/Audiophile-Usb.txt
+++ b/Documentation/sound/alsa/Audiophile-Usb.txt
@@ -1,4 +1,4 @@
-        Guide to using M-Audio Audiophile USB with ALSA and Jack        v1.2
+        Guide to using M-Audio Audiophile USB with ALSA and Jack        v1.3
         ========================================================
 
             Thibault Le Meur <Thibault.LeMeur@supelec.fr>
@@ -22,16 +22,16 @@ The device has 4 audio interfaces, and 2 MIDI ports:
  * Midi In (Mi)
  * Midi Out (Mo)
 
-The internal DAC/ADC has the following caracteristics:
+The internal DAC/ADC has the following characteristics:
 * sample depth of 16 or 24 bits
 * sample rate from 8kHz to 96kHz
-* Two ports can't use different sample depths at the same time.Moreover, the 
+* Two ports can't use different sample depths at the same time. Moreover, the 
 Audiophile USB documentation gives the following Warning: "Please exit any 
 audio application running before switching between bit depths"
 
 Due to the USB 1.1 bandwidth limitation, a limited number of interfaces can be 
 activated at the same time depending on the audio mode selected:
- * 16-bit/48kHz ==> 4 channels in/ 4 channels out
+ * 16-bit/48kHz ==> 4 channels in/4 channels out
    - Ai+Ao+Di+Do
  * 24-bit/48kHz ==> 4 channels in/2 channels out, 
                     or 2 channels in/4 channels out
@@ -41,8 +41,8 @@ activated at the same time depending on the audio mode selected:
 
 Important facts about the Digital interface:
 --------------------------------------------
- * The Do port additionnaly supports surround-encoded AC-3 and DTS passthrough, 
-though I haven't tested it under linux
+ * The Do port additionally supports surround-encoded AC-3 and DTS passthrough, 
+though I haven't tested it under Linux
    - Note that in this setup only the Do interface can be enabled
  * Apart from recording an audio digital stream, enabling the Di port is a way 
 to synchronize the device to an external sample clock
@@ -60,24 +60,23 @@ synchronization error (for instance sound played at an odd sample rate)
 The Audiophile USB MIDI ports will be automatically supported once the 
 following modules have been loaded:
  * snd-usb-audio
- * snd-seq
  * snd-seq-midi
 
-No additionnal setting is required.
+No additional setting is required.
 
 2.2 - Audio ports
 -----------------
 
 Audio functions of the Audiophile USB device are handled by the snd-usb-audio 
 module. This module can work in a default mode (without any device-specific 
-parameter), or in an advanced mode with the device-specific parameter called 
+parameter), or in an "advanced" mode with the device-specific parameter called 
 "device_setup".
 
 2.2.1 - Default Alsa driver mode
 
-The default behaviour of the snd-usb-audio driver is to parse the device 
+The default behavior of the snd-usb-audio driver is to parse the device 
 capabilities at startup and enable all functions inside the device (including 
-all ports at any sample rates and any sample depths supported). This approach 
+all ports at any supported sample rates and sample depths). This approach 
 has the advantage to let the driver easily switch from sample rates/depths 
 automatically according to the need of the application claiming the device.
 
@@ -114,9 +113,9 @@ gain).
 For people having this problem, the snd-usb-audio module has a new module 
 parameter called "device_setup".
 
-2.2.2.1 - Initializing the working mode of the Audiohile USB
+2.2.2.1 - Initializing the working mode of the Audiophile USB
 
-As far as the Audiohile USB device is concerned, this value let the user 
+As far as the Audiophile USB device is concerned, this value let the user 
 specify:
  * the sample depth
  * the sample rate
@@ -174,20 +173,20 @@ The parameter can be given:
 
 IMPORTANT NOTE WHEN SWITCHING CONFIGURATION:
 -------------------------------------------
- * You may need to _first_ intialize the module with the correct device_setup 
+ * You may need to _first_ initialize the module with the correct device_setup 
    parameter and _only_after_ turn on the Audiophile USB device
  * This is especially true when switching the sample depth:
-   - first trun off the device
-   - de-register the snd-usb-audio module
-   - change the device_setup parameter (by either manually reprobing the module 
-     or changing modprobe.conf)
+   - first turn off the device
+   - de-register the snd-usb-audio module (modprobe -r)
+   - change the device_setup parameter by changing the device_setup
+     option in /etc/modprobe.conf 
    - turn on the device
 
 2.2.2.3 - Audiophile USB's device_setup structure
 
 If you want to understand the device_setup magic numbers for the Audiophile 
 USB, you need some very basic understanding of binary computation. However, 
-this is not required to use the parameter and you may skip thi section.
+this is not required to use the parameter and you may skip this section.
 
 The device_setup is one byte long and its structure is the following:
 
@@ -231,11 +230,11 @@ Caution:
 
 2.2.3 -  USB implementation details for this device
 
-You may safely skip this section if you're not interrested in driver 
+You may safely skip this section if you're not interested in driver 
 development.
 
-This section describes some internals aspect of the device and summarize the 
-data I got by usb-snooping the windows and linux drivers.
+This section describes some internal aspects of the device and summarize the 
+data I got by usb-snooping the windows and Linux drivers.
 
 The M-Audio Audiophile USB has 7 USB Interfaces:
 a "USB interface":
@@ -277,9 +276,9 @@ Here is a short description of the AltSettings capabilities:
   - 16-bit depth, 8-48kHz sample mode
   - Synch playback (Do), audio format type III IEC1937_AC-3
 
-In order to ensure a correct intialization of the device, the driver 
+In order to ensure a correct initialization of the device, the driver 
 _must_know_ how the device will be used:
- * if DTS is choosen, only Interface 2 with AltSet nb.6 must be
+ * if DTS is chosen, only Interface 2 with AltSet nb.6 must be
    registered
  * if 96KHz only AltSets nb.1 of each interface must be selected
  * if samples are using 24bits/48KHz then AltSet 2 must me used if
@@ -290,7 +289,7 @@ _must_know_ how the device will be used:
    is not connected
 
 When device_setup is given as a parameter to the snd-usb-audio module, the 
-parse_audio_enpoint function uses a quirk called 
+parse_audio_endpoints function uses a quirk called 
 "audiophile_skip_setting_quirk" in order to prevent AltSettings not 
 corresponding to device_setup from being registered in the driver.
 
@@ -317,9 +316,8 @@ However you may see the following warning message:
 using the "default" ALSA device. This is less efficient than it could be. 
 Consider using a hardware device instead rather than using the plug layer."
 
-
 3.2 - Patching alsa to use direct pcm device
--------------------------------------------
+--------------------------------------------
 A patch for Jack by Andreas Steinmetz adds support for Big Endian devices. 
 However it has not been included in the CVS tree.
 
@@ -331,3 +329,32 @@ After having applied the patch you can run jackd with the following command
 line:
   % jackd -R -dalsa -Phw:1,0 -r48000 -p128 -n2 -D -Chw:1,1
 
+3.2 - Getting 2 input and/or output interfaces in Jack
+------------------------------------------------------
+
+As you can see, starting the Jack server this way will only enable 1 stereo
+input (Di or Ai) and 1 stereo output (Ao or Do).
+
+This is due to the following restrictions:
+* Jack can only open one capture device and one playback device at a time
+* The Audiophile USB is seen as 2 (or three) Alsa devices: hw:1,0, hw:1,1
+  (and optionally hw:1,2)
+If you want to get Ai+Di and/or Ao+Do support with Jack, you would need to
+combine the Alsa devices into one logical "complex" device.
+
+If you want to give it a try, I recommend reading the information from
+this page: http://www.sound-man.co.uk/linuxaudio/ice1712multi.html
+It is related to another device (ice1712) but can be adapted to suit
+the Audiophile USB.
+
+Enabling multiple Audiophile USB interfaces for Jackd will certainly require:
+* patching Jack with the previously mentioned "Big Endian" patch
+* patching Jackd with the MMAP_COMPLEX patch (see the ice1712 page)
+* patching the alsa-lib/src/pcm/pcm_multi.c file (see the ice1712 page)
+* define a multi device (combination of hw:1,0 and hw:1,1) in your .asoundrc
+  file 
+* start jackd with this device
+
+I had no success in testing this for now, but this may be due to my OS
+configuration. If you have any success with this kind of setup, please
+drop me an email.
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index 68eeebc17ff4..1faf76383bab 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -1172,7 +1172,7 @@
   }        
 
   /* PCI IDs */
-  static struct pci_device_id snd_mychip_ids[] = {
+  static struct pci_device_id snd_mychip_ids[] __devinitdata = {
           { PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
             PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
           ....
@@ -1565,7 +1565,7 @@
         <informalexample>
           <programlisting>
 <![CDATA[
-  static struct pci_device_id snd_mychip_ids[] = {
+  static struct pci_device_id snd_mychip_ids[] __devinitdata = {
           { PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
             PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
           ....
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index 935670a3cd98..5755b7e5f187 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -860,9 +860,32 @@ static void k_slock(struct vc_data *vc, unsigned char value, char up_flag, struc
 }
 
 /* by default, 300ms interval for combination release */
-static long brl_timeout = 300;
-MODULE_PARM_DESC(brl_timeout, "Braille keys release delay in ms (0 for combination on first release, < 0 for dead characters)");
-module_param(brl_timeout, long, 0644);
+static unsigned brl_timeout = 300;
+MODULE_PARM_DESC(brl_timeout, "Braille keys release delay in ms (0 for commit on first key release)");
+module_param(brl_timeout, uint, 0644);
+
+static unsigned brl_nbchords = 1;
+MODULE_PARM_DESC(brl_nbchords, "Number of chords that produce a braille pattern (0 for dead chords)");
+module_param(brl_nbchords, uint, 0644);
+
+static void k_brlcommit(struct vc_data *vc, unsigned int pattern, char up_flag, struct pt_regs *regs)
+{
+        static unsigned long chords;
+        static unsigned committed;
+
+        if (!brl_nbchords)
+                k_deadunicode(vc, BRL_UC_ROW | pattern, up_flag, regs);
+        else {
+                committed |= pattern;
+                chords++;
+                if (chords == brl_nbchords) {
+                        k_unicode(vc, BRL_UC_ROW | committed, up_flag, regs);
+                        chords = 0;
+                        committed = 0;
+                }
+        }
+}
+
 static void k_brl(struct vc_data *vc, unsigned char value, char up_flag, struct pt_regs *regs)
 {
         static unsigned pressed,committing;
@@ -882,11 +905,6 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag, struct
         if (value > 8)
                 return;
 
-        if (brl_timeout < 0) {
-                k_deadunicode(vc, BRL_UC_ROW | (1 << (value - 1)), up_flag, regs);
-                return;
-        }
-
         if (up_flag) {
                 if (brl_timeout) {
                         if (!committing ||
@@ -897,13 +915,13 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag, struct
                         pressed &= ~(1 << (value - 1));
                         if (!pressed) {
                                 if (committing) {
-                                        k_unicode(vc, BRL_UC_ROW | committing, 0, regs);
+                                        k_brlcommit(vc, committing, 0, regs);
                                         committing = 0;
                                 }
                         }
                 } else {
                         if (committing) {
-                                k_unicode(vc, BRL_UC_ROW | committing, 0, regs);
+                                k_brlcommit(vc, committing, 0, regs);
                                 committing = 0;
                         }
                         pressed &= ~(1 << (value - 1));
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index a34e3d91d9ed..ba325f16d077 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -403,6 +403,27 @@ static long evdev_ioctl_handler(struct file *file, unsigned int cmd,
                 case EVIOCGID:
                         if (copy_to_user(p, &dev->id, sizeof(struct input_id)))
                                 return -EFAULT;
+                        return 0;
+
+                case EVIOCGREP:
+                        if (!test_bit(EV_REP, dev->evbit))
+                                return -ENOSYS;
+                        if (put_user(dev->rep[REP_DELAY], ip))
+                                return -EFAULT;
+                        if (put_user(dev->rep[REP_PERIOD], ip + 1))
+                                return -EFAULT;
+                        return 0;
+
+                case EVIOCSREP:
+                        if (!test_bit(EV_REP, dev->evbit))
+                                return -ENOSYS;
+                        if (get_user(u, ip))
+                                return -EFAULT;
+                        if (get_user(v, ip + 1))
+                                return -EFAULT;
+
+                        input_event(dev, EV_REP, REP_DELAY, u);
+                        input_event(dev, EV_REP, REP_PERIOD, v);
 
                         return 0;
 
diff --git a/drivers/input/input.c b/drivers/input/input.c
index a935abeffffc..3038c268917d 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -155,6 +155,9 @@ void input_event(struct input_dev *dev, unsigned int type, unsigned int code, in
                         if (code > SND_MAX || !test_bit(code, dev->sndbit))
                                 return;
 
+                        if (!!test_bit(code, dev->snd) != !!value)
+                                change_bit(code, dev->snd);
+
                         if (dev->event) dev->event(dev, type, code, value);
 
                         break;
@@ -286,19 +289,19 @@ static struct input_device_id *input_match_device(struct input_device_id *id, st
         for (; id->flags || id->driver_info; id++) {
 
                 if (id->flags & INPUT_DEVICE_ID_MATCH_BUS)
-                        if (id->id.bustype != dev->id.bustype)
+                        if (id->bustype != dev->id.bustype)
                                 continue;
 
                 if (id->flags & INPUT_DEVICE_ID_MATCH_VENDOR)
-                        if (id->id.vendor != dev->id.vendor)
+                        if (id->vendor != dev->id.vendor)
                                 continue;
 
                 if (id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT)
-                        if (id->id.product != dev->id.product)
+                        if (id->product != dev->id.product)
                                 continue;
 
                 if (id->flags & INPUT_DEVICE_ID_MATCH_VERSION)
-                        if (id->id.version != dev->id.version)
+                        if (id->version != dev->id.version)
                                 continue;
 
                 MATCH_BIT(evbit,  EV_MAX);
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index bc61cf8cfc65..1d238a9d52d6 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -53,8 +53,8 @@ static unsigned char spitzkbd_keycode[NR_SCANCODES] = {
         KEY_LEFTCTRL, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, SPITZ_KEY_EXOK, SPITZ_KEY_EXCANCEL, 0, 0, 0, 0, 0,  /* 1-16 */
         0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, SPITZ_KEY_EXJOGDOWN, SPITZ_KEY_EXJOGUP, 0, 0, 0, 0, 0, /* 17-32 */
         KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0,                                 /* 33-48 */
-        SPITZ_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0,         /* 49-64 */
-        SPITZ_KEY_ADDRESS, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0,     /* 65-80 */
+        SPITZ_KEY_ADDRESS, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0,         /* 49-64 */
+        SPITZ_KEY_CALENDER, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0,    /* 65-80 */
         SPITZ_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, SPITZ_KEY_FN, 0, 0, 0, 0, 0,      /* 81-96 */
         KEY_SYSRQ, SPITZ_KEY_JAP1, SPITZ_KEY_JAP2, SPITZ_KEY_CANCEL, SPITZ_KEY_OK, SPITZ_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0  /* 97-112 */
 };
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 4b415d9b0123..36cd2e07fce8 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -273,6 +273,18 @@ static struct key_entry keymap_fs_amilo_pro_v2000[] = {
         { KE_END,  0 }
 };
 
+static struct key_entry keymap_fujitsu_n3510[] = {
+        { KE_KEY, 0x11, KEY_PROG1 },
+        { KE_KEY, 0x12, KEY_PROG2 },
+        { KE_KEY, 0x36, KEY_WWW },
+        { KE_KEY, 0x31, KEY_MAIL },
+        { KE_KEY, 0x71, KEY_STOPCD },
+        { KE_KEY, 0x72, KEY_PLAYPAUSE },
+        { KE_KEY, 0x74, KEY_REWIND },
+        { KE_KEY, 0x78, KEY_FORWARD },
+        { KE_END, 0 }
+};
+
 static struct key_entry keymap_wistron_ms2141[] = {
         { KE_KEY,  0x11, KEY_PROG1 },
         { KE_KEY,  0x12, KEY_PROG2 },
@@ -323,6 +335,24 @@ static struct dmi_system_id dmi_ids[] = {
         },
         {
                 .callback = dmi_matched,
+                .ident = "Fujitsu-Siemens Amilo M7400",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "AMILO M        "),
+                },
+                .driver_data = keymap_fs_amilo_pro_v2000
+        },
+        {
+                .callback = dmi_matched,
+                .ident = "Fujitsu N3510",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "N3510"),
+                },
+                .driver_data = keymap_fujitsu_n3510
+        },
+        {
+                .callback = dmi_matched,
                 .ident = "Acer Aspire 1500",
                 .matches = {
                         DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 32d70ed8f41d..136321a2cfdb 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -302,8 +302,10 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
  * Check if this is a new device announcement (0xAA 0x00)
  */
         if (unlikely(psmouse->packet[0] == PSMOUSE_RET_BAT && psmouse->pktcnt <= 2)) {
-                if (psmouse->pktcnt == 1)
+                if (psmouse->pktcnt == 1) {
+                        psmouse->last = jiffies;
                         goto out;
+                }
 
                 if (psmouse->packet[1] == PSMOUSE_RET_ID) {
                         __psmouse_set_state(psmouse, PSMOUSE_IGNORE);
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 46d1fec2cfd8..1494175ac6fe 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -2,6 +2,8 @@
  * ADS7846 based touchscreen and sensor driver
  *
  * Copyright (c) 2005 David Brownell
+ * Copyright (c) 2006 Nokia Corporation
+ * Various changes: Imre Deak <imre.deak@nokia.com>
  *
  * Using code from:
  *  - corgi_ts.c
@@ -34,17 +36,25 @@
 
 
 /*
- * This code has been lightly tested on an ads7846.
+ * This code has been tested on an ads7846 / N770 device.
  * Support for ads7843 and ads7845 has only been stubbed in.
  *
- * Not yet done:  investigate the values reported.  Are x/y/pressure
- * event values sane enough for X11?  How accurate are the temperature
- * and voltage readings?  (System-specific calibration should support
+ * Not yet done:  How accurate are the temperature and voltage
+ * readings? (System-specific calibration should support
  * accuracy of 0.3 degrees C; otherwise it's 2.0 degrees.)
  *
+ * IRQ handling needs a workaround because of a shortcoming in handling
+ * edge triggered IRQs on some platforms like the OMAP1/2. These
+ * platforms don't handle the ARM lazy IRQ disabling properly, thus we
+ * have to maintain our own SW IRQ disabled status. This should be
+ * removed as soon as the affected platform's IRQ handling is fixed.
+ *
  * app note sbaa036 talks in more detail about accurate sampling...
  * that ought to help in situations like LCDs inducing noise (which
  * can also be helped by using synch signals) and more generally.
+ * This driver tries to utilize the measures described in the app
+ * note. The strength of filtering can be set in the board-* specific
+ * files.
  */
 
 #define TS_POLL_PERIOD  msecs_to_jiffies(10)
@@ -61,6 +71,7 @@ struct ts_event {
         __be16 x;
         __be16 y;
         __be16 z1, z2;
+        int    ignore;
 };
 
 struct ads7846 {
@@ -71,12 +82,23 @@ struct ads7846 {
         u16                     model;
         u16                     vref_delay_usecs;
         u16                     x_plate_ohms;
+        u16                     pressure_max;
 
-        u8                      read_x, read_y, read_z1, read_z2;
+        u8                      read_x, read_y, read_z1, read_z2, pwrdown;
+        u16                     dummy;          /* for the pwrdown read */
         struct ts_event         tc;
 
-        struct spi_transfer     xfer[8];
-        struct spi_message      msg;
+        struct spi_transfer     xfer[10];
+        struct spi_message      msg[5];
+        struct spi_message      *last_msg;
+        int                     msg_idx;
+        int                     read_cnt;
+        int                     read_rep;
+        int                     last_read;
+
+        u16                     debounce_max;
+        u16                     debounce_tol;
+        u16                     debounce_rep;
 
         spinlock_t              lock;
         struct timer_list       timer;          /* P: lock */
@@ -84,6 +106,9 @@ struct ads7846 {
         unsigned                pending:1;      /* P: lock */
 // FIXME remove "irq_disabled"
         unsigned                irq_disabled:1; /* P: lock */
+        unsigned                disabled:1;
+
+        int                     (*get_pendown_state)(void);
 };
 
 /* leave chip selected when we're done, for quicker re-select? */
@@ -125,7 +150,9 @@ struct ads7846 {
 #define READ_Y  (READ_12BIT_DFR(y)  | ADS_PD10_ADC_ON)
 #define READ_Z1 (READ_12BIT_DFR(z1) | ADS_PD10_ADC_ON)
 #define READ_Z2 (READ_12BIT_DFR(z2) | ADS_PD10_ADC_ON)
-#define READ_X  (READ_12BIT_DFR(x)  | ADS_PD10_PDOWN)   /* LAST */
+
+#define READ_X  (READ_12BIT_DFR(x)  | ADS_PD10_ADC_ON)
+#define PWRDOWN (READ_12BIT_DFR(y)  | ADS_PD10_PDOWN)   /* LAST */
 
 /* single-ended samples need to first power up reference voltage;
  * we leave both ADC and VREF powered
@@ -152,6 +179,15 @@ struct ser_req {
         struct spi_transfer     xfer[6];
 };
 
+static void ads7846_enable(struct ads7846 *ts);
+static void ads7846_disable(struct ads7846 *ts);
+
+static int device_suspended(struct device *dev)
+{
+        struct ads7846 *ts = dev_get_drvdata(dev);
+        return dev->power.power_state.event != PM_EVENT_ON || ts->disabled;
+}
+
 static int ads7846_read12_ser(struct device *dev, unsigned command)
 {
         struct spi_device       *spi = to_spi_device(dev);
@@ -164,7 +200,7 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
         if (!req)
                 return -ENOMEM;
 
-        INIT_LIST_HEAD(&req->msg.transfers);
+        spi_message_init(&req->msg);
 
         /* activate reference, so it has time to settle; */
         req->ref_on = REF_ON;
@@ -204,8 +240,10 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
         for (i = 0; i < 6; i++)
                 spi_message_add_tail(&req->xfer[i], &req->msg);
 
+        ts->irq_disabled = 1;
         disable_irq(spi->irq);
         status = spi_sync(spi, &req->msg);
+        ts->irq_disabled = 0;
         enable_irq(spi->irq);
 
         if (req->msg.status)
@@ -233,6 +271,52 @@ SHOW(temp1)
 SHOW(vaux)
 SHOW(vbatt)
 
+static int is_pen_down(struct device *dev)
+{
+        struct ads7846          *ts = dev_get_drvdata(dev);
+
+        return ts->pendown;
+}
+
+static ssize_t ads7846_pen_down_show(struct device *dev,
+                                     struct device_attribute *attr, char *buf)
+{
+        return sprintf(buf, "%u\n", is_pen_down(dev));
+}
+
+static DEVICE_ATTR(pen_down, S_IRUGO, ads7846_pen_down_show, NULL);
+
+static ssize_t ads7846_disable_show(struct device *dev,
+                                     struct device_attribute *attr, char *buf)
+{
+        struct ads7846  *ts = dev_get_drvdata(dev);
+
+        return sprintf(buf, "%u\n", ts->disabled);
+}
+
+static ssize_t ads7846_disable_store(struct device *dev,
+                                     struct device_attribute *attr,
+                                     const char *buf, size_t count)
+{
+        struct ads7846 *ts = dev_get_drvdata(dev);
+        char *endp;
+        int i;
+
+        i = simple_strtoul(buf, &endp, 10);
+        spin_lock_irq(&ts->lock);
+
+        if (i)
+                ads7846_disable(ts);
+        else
+                ads7846_enable(ts);
+
+        spin_unlock_irq(&ts->lock);
+
+        return count;
+}
+
+static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store);
+
 /*--------------------------------------------------------------------------*/
 
 /*
@@ -264,7 +348,7 @@ static void ads7846_rx(void *ads)
         if (x == MAX_12BIT)
                 x = 0;
 
-        if (x && z1 && ts->spi->dev.power.power_state.event == PM_EVENT_ON) {
+        if (likely(x && z1 && !device_suspended(&ts->spi->dev))) {
                 /* compute touch pressure resistance using equation #2 */
                 Rt = z2;
                 Rt -= z1;
@@ -275,6 +359,14 @@ static void ads7846_rx(void *ads)
         } else
                 Rt = 0;
 
+        /* Sample found inconsistent by debouncing or pressure is beyond
+        * the maximum. Don't report it to user space, repeat at least
+        * once more the measurement */
+        if (ts->tc.ignore || Rt > ts->pressure_max) {
+                mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
+                return;
+        }
+
         /* NOTE:  "pendown" is inferred from pressure; we don't rely on
          * being able to check nPENIRQ status, or "friendly" trigger modes
          * (both-edges is much better than just-falling or low-level).
@@ -296,11 +388,13 @@ static void ads7846_rx(void *ads)
         if (Rt) {
                 input_report_abs(input_dev, ABS_X, x);
                 input_report_abs(input_dev, ABS_Y, y);
-                input_report_abs(input_dev, ABS_PRESSURE, Rt);
                 sync = 1;
         }
-        if (sync)
+
+        if (sync) {
+                input_report_abs(input_dev, ABS_PRESSURE, Rt);
                 input_sync(input_dev);
+        }
 
 #ifdef  VERBOSE
         if (Rt || ts->pendown)
@@ -308,80 +402,138 @@ static void ads7846_rx(void *ads)
                         x, y, Rt, Rt ? "" : " UP");
 #endif
 
-        /* don't retrigger while we're suspended */
         spin_lock_irqsave(&ts->lock, flags);
 
         ts->pendown = (Rt != 0);
-        ts->pending = 0;
+        mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
 
-        if (ts->spi->dev.power.power_state.event == PM_EVENT_ON) {
-                if (ts->pendown)
-                        mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
-                else if (ts->irq_disabled) {
-                        ts->irq_disabled = 0;
-                        enable_irq(ts->spi->irq);
+        spin_unlock_irqrestore(&ts->lock, flags);
+}
+
+static void ads7846_debounce(void *ads)
+{
+        struct ads7846          *ts = ads;
+        struct spi_message      *m;
+        struct spi_transfer     *t;
+        int                     val;
+        int                     status;
+
+        m = &ts->msg[ts->msg_idx];
+        t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
+        val = (*(u16 *)t->rx_buf) >> 3;
+        if (!ts->read_cnt || (abs(ts->last_read - val) > ts->debounce_tol)) {
+                /* Repeat it, if this was the first read or the read
+                 * wasn't consistent enough. */
+                if (ts->read_cnt < ts->debounce_max) {
+                        ts->last_read = val;
+                        ts->read_cnt++;
+                } else {
+                        /* Maximum number of debouncing reached and still
+                         * not enough number of consistent readings. Abort
+                         * the whole sample, repeat it in the next sampling
+                         * period.
+                         */
+                        ts->tc.ignore = 1;
+                        ts->read_cnt = 0;
+                        /* Last message will contain ads7846_rx() as the
+                         * completion function.
+                         */
+                        m = ts->last_msg;
                 }
+                /* Start over collecting consistent readings. */
+                ts->read_rep = 0;
+        } else {
+                if (++ts->read_rep > ts->debounce_rep) {
+                        /* Got a good reading for this coordinate,
+                         * go for the next one. */
+                        ts->tc.ignore = 0;
+                        ts->msg_idx++;
+                        ts->read_cnt = 0;
+                        ts->read_rep = 0;
+                        m++;
+                } else
+                        /* Read more values that are consistent. */
+                        ts->read_cnt++;
         }
-
-        spin_unlock_irqrestore(&ts->lock, flags);
+        status = spi_async(ts->spi, m);
+        if (status)
+                dev_err(&ts->spi->dev, "spi_async --> %d\n",
+                                status);
 }
 
 static void ads7846_timer(unsigned long handle)
 {
         struct ads7846  *ts = (void *)handle;
         int             status = 0;
-        unsigned long   flags;
+
+        spin_lock_irq(&ts->lock);
+
+        if (unlikely(ts->msg_idx && !ts->pendown)) {
+                /* measurment cycle ended */
+                if (!device_suspended(&ts->spi->dev)) {
+                        ts->irq_disabled = 0;
+                        enable_irq(ts->spi->irq);
+                }
+                ts->pending = 0;
+                ts->msg_idx = 0;
+        } else {
+                /* pen is still down, continue with the measurement */
+                ts->msg_idx = 0;
+                status = spi_async(ts->spi, &ts->msg[0]);
+                if (status)
+                        dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
+        }
+
+        spin_unlock_irq(&ts->lock);
+}
+
+static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs)
+{
+        struct ads7846 *ts = handle;
+        unsigned long flags;
 
         spin_lock_irqsave(&ts->lock, flags);
-        if (!ts->pending) {
-                ts->pending = 1;
+        if (likely(ts->get_pendown_state())) {
                 if (!ts->irq_disabled) {
+                        /* REVISIT irq logic for many ARM chips has cloned a
+                         * bug wherein disabling an irq in its handler won't
+                         * work;(it's disabled lazily, and too late to work.
+                         * until all their irq logic is fixed, we must shadow
+                         * that state here.
+                         */
                         ts->irq_disabled = 1;
                         disable_irq(ts->spi->irq);
+                        ts->pending = 1;
+                        mod_timer(&ts->timer, jiffies);
                 }
-                status = spi_async(ts->spi, &ts->msg);
-                if (status)
-                        dev_err(&ts->spi->dev, "spi_async --> %d\n",
-                                        status);
         }
         spin_unlock_irqrestore(&ts->lock, flags);
-}
 
-static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs)
-{
-        ads7846_timer((unsigned long) handle);
         return IRQ_HANDLED;
 }
 
 /*--------------------------------------------------------------------------*/
 
-static int
-ads7846_suspend(struct spi_device *spi, pm_message_t message)
+/* Must be called with ts->lock held */
+static void ads7846_disable(struct ads7846 *ts)
 {
-        struct ads7846 *ts = dev_get_drvdata(&spi->dev);
-        unsigned long   flags;
+        if (ts->disabled)
+                return;
 
-        spin_lock_irqsave(&ts->lock, flags);
-
-        spi->dev.power.power_state = message;
+        ts->disabled = 1;
 
         /* are we waiting for IRQ, or polling? */
-        if (!ts->pendown) {
-                if (!ts->irq_disabled) {
-                        ts->irq_disabled = 1;
-                        disable_irq(ts->spi->irq);
-                }
+        if (!ts->pending) {
+                ts->irq_disabled = 1;
+                disable_irq(ts->spi->irq);
         } else {
-                /* polling; force a final SPI completion;
-                 * that will clean things up neatly
+                /* the timer will run at least once more, and
+                 * leave everything in a clean state, IRQ disabled
                  */
-                if (!ts->pending)
-                        mod_timer(&ts->timer, jiffies);
-
-                while (ts->pendown || ts->pending) {
-                        spin_unlock_irqrestore(&ts->lock, flags);
-                        udelay(10);
-                        spin_lock_irqsave(&ts->lock, flags);
+                while (ts->pending) {
+                        spin_unlock_irq(&ts->lock);
+                        msleep(1);
+                        spin_lock_irq(&ts->lock);
                 }
         }
 
@@ -389,17 +541,45 @@ ads7846_suspend(struct spi_device *spi, pm_message_t message)
          * leave it that way after every request
          */
 
-        spin_unlock_irqrestore(&ts->lock, flags);
+}
+
+/* Must be called with ts->lock held */
+static void ads7846_enable(struct ads7846 *ts)
+{
+        if (!ts->disabled)
+                return;
+
+        ts->disabled = 0;
+        ts->irq_disabled = 0;
+        enable_irq(ts->spi->irq);
+}
+
+static int ads7846_suspend(struct spi_device *spi, pm_message_t message)
+{
+        struct ads7846 *ts = dev_get_drvdata(&spi->dev);
+
+        spin_lock_irq(&ts->lock);
+
+        spi->dev.power.power_state = message;
+        ads7846_disable(ts);
+
+        spin_unlock_irq(&ts->lock);
+
         return 0;
+
 }
 
 static int ads7846_resume(struct spi_device *spi)
 {
         struct ads7846 *ts = dev_get_drvdata(&spi->dev);
 
-        ts->irq_disabled = 0;
-        enable_irq(ts->spi->irq);
+        spin_lock_irq(&ts->lock);
+
         spi->dev.power.power_state = PMSG_ON;
+        ads7846_enable(ts);
+
+        spin_unlock_irq(&ts->lock);
+
         return 0;
 }
 
@@ -408,6 +588,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
         struct ads7846                  *ts;
         struct input_dev                *input_dev;
         struct ads7846_platform_data    *pdata = spi->dev.platform_data;
+        struct spi_message              *m;
         struct spi_transfer             *x;
         int                             err;
 
@@ -428,6 +609,11 @@ static int __devinit ads7846_probe(struct spi_device *spi)
                 return -EINVAL;
         }
 
+        if (pdata->get_pendown_state == NULL) {
+                dev_dbg(&spi->dev, "no get_pendown_state function?\n");
+                return -EINVAL;
+        }
+
         /* We'd set the wordsize to 12 bits ... except that some controllers
          * will then treat the 8 bit command words as 12 bits (and drop the
          * four MSBs of the 12 bit result).  Result: inputs must be shifted
@@ -451,9 +637,21 @@ static int __devinit ads7846_probe(struct spi_device *spi)
         ts->timer.data = (unsigned long) ts;
         ts->timer.function = ads7846_timer;
 
+        spin_lock_init(&ts->lock);
+
         ts->model = pdata->model ? : 7846;
         ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
         ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
+        ts->pressure_max = pdata->pressure_max ? : ~0;
+        if (pdata->debounce_max) {
+                ts->debounce_max = pdata->debounce_max;
+                ts->debounce_tol = pdata->debounce_tol;
+                ts->debounce_rep = pdata->debounce_rep;
+                if (ts->debounce_rep > ts->debounce_max + 1)
+                        ts->debounce_rep = ts->debounce_max - 1;
+        } else
+                ts->debounce_tol = ~0;
+        ts->get_pendown_state = pdata->get_pendown_state;
 
         snprintf(ts->phys, sizeof(ts->phys), "%s/input0", spi->dev.bus_id);
 
@@ -477,60 +675,100 @@ static int __devinit ads7846_probe(struct spi_device *spi)
         /* set up the transfers to read touchscreen state; this assumes we
          * use formula #2 for pressure, not #3.
          */
-        INIT_LIST_HEAD(&ts->msg.transfers);
+        m = &ts->msg[0];
         x = ts->xfer;
 
+        spi_message_init(m);
+
         /* y- still on; turn on only y+ (and ADC) */
         ts->read_y = READ_Y;
         x->tx_buf = &ts->read_y;
         x->len = 1;
-        spi_message_add_tail(x, &ts->msg);
+        spi_message_add_tail(x, m);
 
         x++;
         x->rx_buf = &ts->tc.y;
         x->len = 2;
-        spi_message_add_tail(x, &ts->msg);
+        spi_message_add_tail(x, m);
+
+        m->complete = ads7846_debounce;
+        m->context = ts;
+
+        m++;
+        spi_message_init(m);
+
+        /* turn y- off, x+ on, then leave in lowpower */
+        x++;
+        ts->read_x = READ_X;
+        x->tx_buf = &ts->read_x;
+        x->len = 1;
+        spi_message_add_tail(x, m);
+
+        x++;
+        x->rx_buf = &ts->tc.x;
+        x->len = 2;
+        spi_message_add_tail(x, m);
+
+        m->complete = ads7846_debounce;
+        m->context = ts;
 
         /* turn y+ off, x- on; we'll use formula #2 */
         if (ts->model == 7846) {
+                m++;
+                spi_message_init(m);
+
                 x++;
                 ts->read_z1 = READ_Z1;
                 x->tx_buf = &ts->read_z1;
                 x->len = 1;
-                spi_message_add_tail(x, &ts->msg);
+                spi_message_add_tail(x, m);
 
                 x++;
                 x->rx_buf = &ts->tc.z1;
                 x->len = 2;
-                spi_message_add_tail(x, &ts->msg);
+                spi_message_add_tail(x, m);
+
+                m->complete = ads7846_debounce;
+                m->context = ts;
+
+                m++;
+                spi_message_init(m);
 
                 x++;
                 ts->read_z2 = READ_Z2;
                 x->tx_buf = &ts->read_z2;
                 x->len = 1;
-                spi_message_add_tail(x, &ts->msg);
+                spi_message_add_tail(x, m);
 
                 x++;
                 x->rx_buf = &ts->tc.z2;
                 x->len = 2;
-                spi_message_add_tail(x, &ts->msg);
+                spi_message_add_tail(x, m);
+
+                m->complete = ads7846_debounce;
+                m->context = ts;
         }
 
-        /* turn y- off, x+ on, then leave in lowpower */
+        /* power down */
+        m++;
+        spi_message_init(m);
+
         x++;
-        ts->read_x = READ_X;
-        x->tx_buf = &ts->read_x;
+        ts->pwrdown = PWRDOWN;
+        x->tx_buf = &ts->pwrdown;
         x->len = 1;
-        spi_message_add_tail(x, &ts->msg);
+        spi_message_add_tail(x, m);
 
         x++;
-        x->rx_buf = &ts->tc.x;
+        x->rx_buf = &ts->dummy;
         x->len = 2;
         CS_CHANGE(*x);
-        spi_message_add_tail(x, &ts->msg);
+        spi_message_add_tail(x, m);
 
-        ts->msg.complete = ads7846_rx;
-        ts->msg.context = ts;
+        m->complete = ads7846_rx;
+        m->context = ts;
+
+        ts->last_msg = m;
 
         if (request_irq(spi->irq, ads7846_irq,
                         SA_SAMPLE_RANDOM | SA_TRIGGER_FALLING,
@@ -559,13 +797,27 @@ static int __devinit ads7846_probe(struct spi_device *spi)
                 device_create_file(&spi->dev, &dev_attr_vbatt);
         device_create_file(&spi->dev, &dev_attr_vaux);
 
+        device_create_file(&spi->dev, &dev_attr_pen_down);
+
+        device_create_file(&spi->dev, &dev_attr_disable);
+
         err = input_register_device(input_dev);
         if (err)
-                goto err_free_irq;
+                goto err_remove_attr;
 
         return 0;
 
- err_free_irq:
+ err_remove_attr:
+        device_remove_file(&spi->dev, &dev_attr_disable);
+        device_remove_file(&spi->dev, &dev_attr_pen_down);
+        if (ts->model == 7846) {
+                device_remove_file(&spi->dev, &dev_attr_temp1);
+                device_remove_file(&spi->dev, &dev_attr_temp0);
+        }
+        if (ts->model != 7845)
+                device_remove_file(&spi->dev, &dev_attr_vbatt);
+        device_remove_file(&spi->dev, &dev_attr_vaux);
+
         free_irq(spi->irq, ts);
  err_free_mem:
         input_free_device(input_dev);
@@ -577,20 +829,24 @@ static int __devexit ads7846_remove(struct spi_device *spi)
 {
         struct ads7846          *ts = dev_get_drvdata(&spi->dev);
 
+        input_unregister_device(ts->input);
+
         ads7846_suspend(spi, PMSG_SUSPEND);
-        free_irq(ts->spi->irq, ts);
-        if (ts->irq_disabled)
-                enable_irq(ts->spi->irq);
 
+        device_remove_file(&spi->dev, &dev_attr_disable);
+        device_remove_file(&spi->dev, &dev_attr_pen_down);
         if (ts->model == 7846) {
-                device_remove_file(&spi->dev, &dev_attr_temp0);
                 device_remove_file(&spi->dev, &dev_attr_temp1);
+                device_remove_file(&spi->dev, &dev_attr_temp0);
         }
         if (ts->model != 7845)
                 device_remove_file(&spi->dev, &dev_attr_vbatt);
         device_remove_file(&spi->dev, &dev_attr_vaux);
 
-        input_unregister_device(ts->input);
+        free_irq(ts->spi->irq, ts);
+        /* suspend left the IRQ disabled */
+        enable_irq(ts->spi->irq);
+
         kfree(ts);
 
         dev_dbg(&spi->dev, "unregistered touchscreen\n");
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index f9d87b86492c..320b3d9384ba 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -616,7 +616,7 @@ static struct snd_kcontrol_new snd_cx88_capture_volume = {
  * Only boards with eeprom and byte 1 at eeprom=1 have it
  */
 
-static struct pci_device_id cx88_audio_pci_tbl[] = {
+static struct pci_device_id cx88_audio_pci_tbl[] __devinitdata = {
         {0x14f1,0x8801,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
         {0x14f1,0x8811,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
         {0, }
diff --git a/include/linux/input.h b/include/linux/input.h
index f7ac97d834f6..50e338d2ffda 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -12,8 +12,6 @@
 #ifdef __KERNEL__
 #include <linux/time.h>
 #include <linux/list.h>
-#include <linux/device.h>
-#include <linux/mod_devicetable.h>
 #else
 #include <sys/time.h>
 #include <sys/ioctl.h>
@@ -58,6 +56,8 @@ struct input_absinfo {
 
 #define EVIOCGVERSION           _IOR('E', 0x01, int)                    /* get driver version */
 #define EVIOCGID                _IOR('E', 0x02, struct input_id)        /* get device ID */
+#define EVIOCGREP               _IOR('E', 0x03, int[2])                 /* get repeat settings */
+#define EVIOCSREP               _IOW('E', 0x03, int[2])                 /* set repeat settings */
 #define EVIOCGKEYCODE           _IOR('E', 0x04, int[2])                 /* get keycode */
 #define EVIOCSKEYCODE           _IOW('E', 0x04, int[2])                 /* set keycode */
 
@@ -577,15 +577,15 @@ struct input_absinfo {
  * Switch events
  */
 
-#define SW_0            0x00
-#define SW_1            0x01
-#define SW_2            0x02
-#define SW_3            0x03
-#define SW_4            0x04
-#define SW_5            0x05
-#define SW_6            0x06
-#define SW_7            0x07
-#define SW_MAX          0x0f
+#define SW_0                    0x00
+#define SW_1                    0x01
+#define SW_2                    0x02
+#define SW_3                    0x03
+#define SW_4                    0x04
+#define SW_5                    0x05
+#define SW_6                    0x06
+#define SW_7                    0x07
+#define SW_MAX                  0x0f
 
 /*
  * Misc events
@@ -805,56 +805,16 @@ struct ff_effect {
 
 #define FF_MAX          0x7f
 
-#ifdef LINUX_MOD_DEVICETABLE_H
-/* We only want this if mod_devicetable.h has been included -- that's
-   either in kernel space, or in scripts/mod/file2alias.c */
-struct input_device_id {
-
-        kernel_ulong_t flags;
-
-        struct input_id id;
-
-        kernel_ulong_t evbit[EV_MAX/BITS_PER_LONG+1];
-        kernel_ulong_t keybit[KEY_MAX/BITS_PER_LONG+1];
-        kernel_ulong_t relbit[REL_MAX/BITS_PER_LONG+1];
-        kernel_ulong_t absbit[ABS_MAX/BITS_PER_LONG+1];
-        kernel_ulong_t mscbit[MSC_MAX/BITS_PER_LONG+1];
-        kernel_ulong_t ledbit[LED_MAX/BITS_PER_LONG+1];
-        kernel_ulong_t sndbit[SND_MAX/BITS_PER_LONG+1];
-        kernel_ulong_t ffbit[FF_MAX/BITS_PER_LONG+1];
-        kernel_ulong_t swbit[SW_MAX/BITS_PER_LONG+1];
-
-        kernel_ulong_t driver_info;
-};
-#endif 
-
-/*
- * Structure for hotplug & device<->driver matching.
- */
-
-#define INPUT_DEVICE_ID_MATCH_BUS       1
-#define INPUT_DEVICE_ID_MATCH_VENDOR    2
-#define INPUT_DEVICE_ID_MATCH_PRODUCT   4
-#define INPUT_DEVICE_ID_MATCH_VERSION   8
-
-#define INPUT_DEVICE_ID_MATCH_EVBIT     0x010
-#define INPUT_DEVICE_ID_MATCH_KEYBIT    0x020
-#define INPUT_DEVICE_ID_MATCH_RELBIT    0x040
-#define INPUT_DEVICE_ID_MATCH_ABSBIT    0x080
-#define INPUT_DEVICE_ID_MATCH_MSCIT     0x100
-#define INPUT_DEVICE_ID_MATCH_LEDBIT    0x200
-#define INPUT_DEVICE_ID_MATCH_SNDBIT    0x400
-#define INPUT_DEVICE_ID_MATCH_FFBIT     0x800
-#define INPUT_DEVICE_ID_MATCH_SWBIT     0x1000
-
 #ifdef __KERNEL__
 
 /*
  * In-kernel definitions.
  */
 
+#include <linux/device.h>
 #include <linux/fs.h>
 #include <linux/timer.h>
+#include <linux/mod_devicetable.h>
 
 #define NBITS(x) (((x)/BITS_PER_LONG)+1)
 #define BIT(x)  (1UL<<((x)%BITS_PER_LONG))
@@ -955,9 +915,49 @@ struct input_dev {
 };
 #define to_input_dev(d) container_of(d, struct input_dev, cdev)
 
-#define INPUT_DEVICE_ID_MATCH_DEVICE\
+/*
+ * Verify that we are in sync with input_device_id mod_devicetable.h #defines
+ */
+
+#if EV_MAX != INPUT_DEVICE_ID_EV_MAX
+#error "EV_MAX and INPUT_DEVICE_ID_EV_MAX do not match"
+#endif
+
+#if KEY_MAX != INPUT_DEVICE_ID_KEY_MAX
+#error "KEY_MAX and INPUT_DEVICE_ID_KEY_MAX do not match"
+#endif
+
+#if REL_MAX != INPUT_DEVICE_ID_REL_MAX
+#error "REL_MAX and INPUT_DEVICE_ID_REL_MAX do not match"
+#endif
+
+#if ABS_MAX != INPUT_DEVICE_ID_ABS_MAX
+#error "ABS_MAX and INPUT_DEVICE_ID_ABS_MAX do not match"
+#endif
+
+#if MSC_MAX != INPUT_DEVICE_ID_MSC_MAX
+#error "MSC_MAX and INPUT_DEVICE_ID_MSC_MAX do not match"
+#endif
+
+#if LED_MAX != INPUT_DEVICE_ID_LED_MAX
+#error "LED_MAX and INPUT_DEVICE_ID_LED_MAX do not match"
+#endif
+
+#if SND_MAX != INPUT_DEVICE_ID_SND_MAX
+#error "SND_MAX and INPUT_DEVICE_ID_SND_MAX do not match"
+#endif
+
+#if FF_MAX != INPUT_DEVICE_ID_FF_MAX
+#error "FF_MAX and INPUT_DEVICE_ID_FF_MAX do not match"
+#endif
+
+#if SW_MAX != INPUT_DEVICE_ID_SW_MAX
+#error "SW_MAX and INPUT_DEVICE_ID_SW_MAX do not match"
+#endif
+
+#define INPUT_DEVICE_ID_MATCH_DEVICE \
         (INPUT_DEVICE_ID_MATCH_BUS | INPUT_DEVICE_ID_MATCH_VENDOR | INPUT_DEVICE_ID_MATCH_PRODUCT)
-#define INPUT_DEVICE_ID_MATCH_DEVICE_AND_VERSION\
+#define INPUT_DEVICE_ID_MATCH_DEVICE_AND_VERSION \
         (INPUT_DEVICE_ID_MATCH_DEVICE | INPUT_DEVICE_ID_MATCH_VERSION)
 
 struct input_handle;
@@ -1020,7 +1020,8 @@ static inline void input_put_device(struct input_dev *dev)
 
 static inline void input_free_device(struct input_dev *dev)
 {
-        input_put_device(dev);
+        if (dev)
+                input_put_device(dev);
 }
 
 int input_register_device(struct input_dev *);
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 7b08c11ec4cc..f6977708585c 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -249,4 +249,52 @@ struct i2c_device_id {
         __u16 id;
 };
 
+/* Input */
+#define INPUT_DEVICE_ID_EV_MAX          0x1f
+#define INPUT_DEVICE_ID_KEY_MAX         0x1ff
+#define INPUT_DEVICE_ID_REL_MAX         0x0f
+#define INPUT_DEVICE_ID_ABS_MAX         0x3f
+#define INPUT_DEVICE_ID_MSC_MAX         0x07
+#define INPUT_DEVICE_ID_LED_MAX         0x0f
+#define INPUT_DEVICE_ID_SND_MAX         0x07
+#define INPUT_DEVICE_ID_FF_MAX          0x7f
+#define INPUT_DEVICE_ID_SW_MAX          0x0f
+
+#define INPUT_DEVICE_ID_MATCH_BUS       1
+#define INPUT_DEVICE_ID_MATCH_VENDOR    2
+#define INPUT_DEVICE_ID_MATCH_PRODUCT   4
+#define INPUT_DEVICE_ID_MATCH_VERSION   8
+
+#define INPUT_DEVICE_ID_MATCH_EVBIT     0x0010
+#define INPUT_DEVICE_ID_MATCH_KEYBIT    0x0020
+#define INPUT_DEVICE_ID_MATCH_RELBIT    0x0040
+#define INPUT_DEVICE_ID_MATCH_ABSBIT    0x0080
+#define INPUT_DEVICE_ID_MATCH_MSCIT     0x0100
+#define INPUT_DEVICE_ID_MATCH_LEDBIT    0x0200
+#define INPUT_DEVICE_ID_MATCH_SNDBIT    0x0400
+#define INPUT_DEVICE_ID_MATCH_FFBIT     0x0800
+#define INPUT_DEVICE_ID_MATCH_SWBIT     0x1000
+
+struct input_device_id {
+
+        kernel_ulong_t flags;
+
+        __u16 bustype;
+        __u16 vendor;
+        __u16 product;
+        __u16 version;
+
+        kernel_ulong_t evbit[INPUT_DEVICE_ID_EV_MAX / BITS_PER_LONG + 1];
+        kernel_ulong_t keybit[INPUT_DEVICE_ID_KEY_MAX / BITS_PER_LONG + 1];
+        kernel_ulong_t relbit[INPUT_DEVICE_ID_REL_MAX / BITS_PER_LONG + 1];
+        kernel_ulong_t absbit[INPUT_DEVICE_ID_ABS_MAX / BITS_PER_LONG + 1];
+        kernel_ulong_t mscbit[INPUT_DEVICE_ID_MSC_MAX / BITS_PER_LONG + 1];
+        kernel_ulong_t ledbit[INPUT_DEVICE_ID_LED_MAX / BITS_PER_LONG + 1];
+        kernel_ulong_t sndbit[INPUT_DEVICE_ID_SND_MAX / BITS_PER_LONG + 1];
+        kernel_ulong_t ffbit[INPUT_DEVICE_ID_FF_MAX / BITS_PER_LONG + 1];
+        kernel_ulong_t swbit[INPUT_DEVICE_ID_SW_MAX / BITS_PER_LONG + 1];
+
+        kernel_ulong_t driver_info;
+};
+
 #endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index 72261e0f2ac1..adb3dafd33e9 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -14,5 +14,12 @@ struct ads7846_platform_data {
         u16     x_min, x_max;
         u16     y_min, y_max;
         u16     pressure_min, pressure_max;
+
+        u16     debounce_max;           /* max number of additional readings
+                                         * per sample */
+        u16     debounce_tol;           /* tolerance used for filtering */
+        u16     debounce_rep;           /* additional consecutive good readings
+                                         * required after the first two */
+        int     (*get_pendown_state)(void);
 };
 
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index df70e7592ab5..373425895faa 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -374,12 +374,14 @@ struct snd_pcm_substream {
         /* -- OSS things -- */
         struct snd_pcm_oss_substream oss;
 #endif
+#ifdef CONFIG_SND_VERBOSE_PROCFS
         struct snd_info_entry *proc_root;
         struct snd_info_entry *proc_info_entry;
         struct snd_info_entry *proc_hw_params_entry;
         struct snd_info_entry *proc_sw_params_entry;
         struct snd_info_entry *proc_status_entry;
         struct snd_info_entry *proc_prealloc_entry;
+#endif
         /* misc flags */
         unsigned int no_mmap_ctrl: 1;
         unsigned int hw_opened: 1;
@@ -400,12 +402,14 @@ struct snd_pcm_str {
         struct snd_pcm_oss_stream oss;
 #endif
         struct snd_pcm_file *files;
+#ifdef CONFIG_SND_VERBOSE_PROCFS
         struct snd_info_entry *proc_root;
         struct snd_info_entry *proc_info_entry;
-#ifdef CONFIG_SND_DEBUG
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
         unsigned int xrun_debug;        /* 0 = disabled, 1 = verbose, 2 = stacktrace */
         struct snd_info_entry *proc_xrun_debug_entry;
 #endif
+#endif
 };
 
 struct snd_pcm {
diff --git a/include/sound/pcm_oss.h b/include/sound/pcm_oss.h
index 39df2baca18a..c854647b6f3c 100644
--- a/include/sound/pcm_oss.h
+++ b/include/sound/pcm_oss.h
@@ -75,7 +75,9 @@ struct snd_pcm_oss_substream {
 struct snd_pcm_oss_stream {
         struct snd_pcm_oss_setup *setup_list;   /* setup list */
         struct mutex setup_mutex;
+#ifdef CONFIG_SND_VERBOSE_PROCFS
         struct snd_info_entry *proc_entry;
+#endif
 };
 
 struct snd_pcm_oss {
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 84e21201f3c0..37f67c23e11b 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -374,10 +374,10 @@ static void do_input(char *alias,
                      kernel_ulong_t *arr, unsigned int min, unsigned int max)
 {
         unsigned int i;
-        for (i = min; i < max; i++) {
-                if (arr[i/BITS_PER_LONG] & (1 << (i%BITS_PER_LONG)))
-                        sprintf(alias+strlen(alias), "%X,*", i);
-        }
+
+        for (i = min; i < max; i++)
+                if (arr[i / BITS_PER_LONG] & (1 << (i%BITS_PER_LONG)))
+                        sprintf(alias + strlen(alias), "%X,*", i);
 }
 
 /* input:b0v0p0e0-eXkXrXaXmXlXsXfXwX where X is comma-separated %02X. */
@@ -386,39 +386,37 @@ static int do_input_entry(const char *filename, struct input_device_id *id,
 {
         sprintf(alias, "input:");
 
-        ADD(alias, "b", id->flags&INPUT_DEVICE_ID_MATCH_BUS, id->id.bustype);
-        ADD(alias, "v", id->flags&INPUT_DEVICE_ID_MATCH_VENDOR, id->id.vendor);
-        ADD(alias, "p", id->flags&INPUT_DEVICE_ID_MATCH_PRODUCT,
-            id->id.product);
-        ADD(alias, "e", id->flags&INPUT_DEVICE_ID_MATCH_VERSION,
-            id->id.version);
+        ADD(alias, "b", id->flags & INPUT_DEVICE_ID_MATCH_BUS, id->bustype);
+        ADD(alias, "v", id->flags & INPUT_DEVICE_ID_MATCH_VENDOR, id->vendor);
+        ADD(alias, "p", id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT, id->product);
+        ADD(alias, "e", id->flags & INPUT_DEVICE_ID_MATCH_VERSION, id->version);
 
         sprintf(alias + strlen(alias), "-e*");
-        if (id->flags&INPUT_DEVICE_ID_MATCH_EVBIT)
+        if (id->flags & INPUT_DEVICE_ID_MATCH_EVBIT)
                 do_input(alias, id->evbit, 0, EV_MAX);
         sprintf(alias + strlen(alias), "k*");
-        if (id->flags&INPUT_DEVICE_ID_MATCH_KEYBIT)
+        if (id->flags & INPUT_DEVICE_ID_MATCH_KEYBIT)
                 do_input(alias, id->keybit, KEY_MIN_INTERESTING, KEY_MAX);
         sprintf(alias + strlen(alias), "r*");
-        if (id->flags&INPUT_DEVICE_ID_MATCH_RELBIT)
+        if (id->flags & INPUT_DEVICE_ID_MATCH_RELBIT)
                 do_input(alias, id->relbit, 0, REL_MAX);
         sprintf(alias + strlen(alias), "a*");
-        if (id->flags&INPUT_DEVICE_ID_MATCH_ABSBIT)
+        if (id->flags & INPUT_DEVICE_ID_MATCH_ABSBIT)
                 do_input(alias, id->absbit, 0, ABS_MAX);
         sprintf(alias + strlen(alias), "m*");
-        if (id->flags&INPUT_DEVICE_ID_MATCH_MSCIT)
+        if (id->flags & INPUT_DEVICE_ID_MATCH_MSCIT)
                 do_input(alias, id->mscbit, 0, MSC_MAX);
         sprintf(alias + strlen(alias), "l*");
-        if (id->flags&INPUT_DEVICE_ID_MATCH_LEDBIT)
+        if (id->flags & INPUT_DEVICE_ID_MATCH_LEDBIT)
                 do_input(alias, id->ledbit, 0, LED_MAX);
         sprintf(alias + strlen(alias), "s*");
-        if (id->flags&INPUT_DEVICE_ID_MATCH_SNDBIT)
+        if (id->flags & INPUT_DEVICE_ID_MATCH_SNDBIT)
                 do_input(alias, id->sndbit, 0, SND_MAX);
         sprintf(alias + strlen(alias), "f*");
-        if (id->flags&INPUT_DEVICE_ID_MATCH_FFBIT)
+        if (id->flags & INPUT_DEVICE_ID_MATCH_FFBIT)
                 do_input(alias, id->ffbit, 0, FF_MAX);
         sprintf(alias + strlen(alias), "w*");
-        if (id->flags&INPUT_DEVICE_ID_MATCH_SWBIT)
+        if (id->flags & INPUT_DEVICE_ID_MATCH_SWBIT)
                 do_input(alias, id->swbit, 0, SW_MAX);
         return 1;
 }
diff --git a/sound/core/Kconfig b/sound/core/Kconfig
index 8efc1b12f3a8..4262a1c87731 100644
--- a/sound/core/Kconfig
+++ b/sound/core/Kconfig
@@ -142,7 +142,7 @@ config SND_SUPPORT_OLD_API
 
 config SND_VERBOSE_PROCFS
         bool "Verbose procfs contents"
-        depends on SND
+        depends on SND && PROC_FS
         default y
         help
           Say Y here to include code for verbose procfs contents (provides
@@ -171,3 +171,13 @@ config SND_DEBUG_DETECT
         help
           Say Y here to enable extra-verbose log messages printed when
           detecting devices.
+
+config SND_PCM_XRUN_DEBUG
+        bool "Enable PCM ring buffer overrun/underrun debugging"
+        default n
+        depends on SND_DEBUG && SND_VERBOSE_PROCFS
+        help
+          Say Y to enable the PCM ring buffer overrun/underrun debugging.
+          It is usually not required, but if you have trouble with
+          sound clicking when system is loaded, it may help to determine
+          the process or driver which causes the scheduling gaps.
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index c5978d6c6080..ac990bf0b48f 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -1242,6 +1242,8 @@ static int snd_pcm_oss_set_format(struct snd_pcm_oss_file *pcm_oss_file, int for
         
         if (format != AFMT_QUERY) {
                 formats = snd_pcm_oss_get_formats(pcm_oss_file);
+                if (formats < 0)
+                        return formats;
                 if (!(formats & format))
                         format = AFMT_U8;
                 for (idx = 1; idx >= 0; --idx) {
@@ -2212,7 +2214,7 @@ static int snd_pcm_oss_mmap(struct file *file, struct vm_area_struct *area)
         return 0;
 }
 
-#ifdef CONFIG_PROC_FS
+#ifdef CONFIG_SND_VERBOSE_PROCFS
 /*
  *  /proc interface
  */
@@ -2366,10 +2368,10 @@ static void snd_pcm_oss_proc_done(struct snd_pcm *pcm)
                 }
         }
 }
-#else /* !CONFIG_PROC_FS */
+#else /* !CONFIG_SND_VERBOSE_PROCFS */
 #define snd_pcm_oss_proc_init(pcm)
 #define snd_pcm_oss_proc_done(pcm)
-#endif /* CONFIG_PROC_FS */
+#endif /* CONFIG_SND_VERBOSE_PROCFS */
 
 /*
  *  ENTRY functions
diff --git a/sound/core/pcm.c b/sound/core/pcm.c
index 122e10a61ab9..84b00038236d 100644
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -142,7 +142,7 @@ static int snd_pcm_control_ioctl(struct snd_card *card,
         return -ENOIOCTLCMD;
 }
 
-#if defined(CONFIG_PROC_FS) && defined(CONFIG_SND_VERBOSE_PROCFS)
+#ifdef CONFIG_SND_VERBOSE_PROCFS
 
 #define STATE(v) [SNDRV_PCM_STATE_##v] = #v
 #define STREAM(v) [SNDRV_PCM_STREAM_##v] = #v
@@ -436,7 +436,7 @@ static void snd_pcm_substream_proc_status_read(struct snd_info_entry *entry,
         snd_iprintf(buffer, "appl_ptr    : %ld\n", runtime->control->appl_ptr);
 }
 
-#ifdef CONFIG_SND_DEBUG
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
 static void snd_pcm_xrun_debug_read(struct snd_info_entry *entry,
                                     struct snd_info_buffer *buffer)
 {
@@ -480,7 +480,7 @@ static int snd_pcm_stream_proc_init(struct snd_pcm_str *pstr)
         }
         pstr->proc_info_entry = entry;
 
-#ifdef CONFIG_SND_DEBUG
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
         if ((entry = snd_info_create_card_entry(pcm->card, "xrun_debug",
                                                 pstr->proc_root)) != NULL) {
                 entry->c.text.read_size = 64;
@@ -501,7 +501,7 @@ static int snd_pcm_stream_proc_init(struct snd_pcm_str *pstr)
 
 static int snd_pcm_stream_proc_done(struct snd_pcm_str *pstr)
 {
-#ifdef CONFIG_SND_DEBUG
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
         if (pstr->proc_xrun_debug_entry) {
                 snd_info_unregister(pstr->proc_xrun_debug_entry);
                 pstr->proc_xrun_debug_entry = NULL;
@@ -599,12 +599,12 @@ static int snd_pcm_substream_proc_done(struct snd_pcm_substream *substream)
         }
         return 0;
 }
-#else /* !CONFIG_PROC_FS */
+#else /* !CONFIG_SND_VERBOSE_PROCFS */
 static inline int snd_pcm_stream_proc_init(struct snd_pcm_str *pstr) { return 0; }
 static inline int snd_pcm_stream_proc_done(struct snd_pcm_str *pstr) { return 0; }
 static inline int snd_pcm_substream_proc_init(struct snd_pcm_substream *substream) { return 0; }
 static inline int snd_pcm_substream_proc_done(struct snd_pcm_substream *substream) { return 0; }
-#endif /* CONFIG_PROC_FS */
+#endif /* CONFIG_SND_VERBOSE_PROCFS */
 
 /**
  * snd_pcm_new_stream - create a new PCM stream
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index 230a940d00bd..eedc6cb038bb 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -130,7 +130,7 @@ void snd_pcm_playback_silence(struct snd_pcm_substream *substream, snd_pcm_ufram
 static void xrun(struct snd_pcm_substream *substream)
 {
         snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
-#ifdef CONFIG_SND_DEBUG
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
         if (substream->pstr->xrun_debug) {
                 snd_printd(KERN_DEBUG "XRUN: pcmC%dD%d%c\n",
                            substream->pcm->card->number,
@@ -204,7 +204,7 @@ static inline int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *subs
         delta = hw_ptr_interrupt - new_hw_ptr;
         if (delta > 0) {
                 if ((snd_pcm_uframes_t)delta < runtime->buffer_size / 2) {
-#ifdef CONFIG_SND_DEBUG
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
                         if (runtime->periods > 1 && substream->pstr->xrun_debug) {
                                 snd_printd(KERN_ERR "Unexpected hw_pointer value [1] (stream = %i, delta: -%ld, max jitter = %ld): wrong interrupt acknowledge?\n", substream->stream, (long) delta, runtime->buffer_size / 2);
                                 if (substream->pstr->xrun_debug > 1)
@@ -249,7 +249,7 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream)
         delta = old_hw_ptr - new_hw_ptr;
         if (delta > 0) {
                 if ((snd_pcm_uframes_t)delta < runtime->buffer_size / 2) {
-#ifdef CONFIG_SND_DEBUG
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
                         if (runtime->periods > 2 && substream->pstr->xrun_debug) {
                                 snd_printd(KERN_ERR "Unexpected hw_pointer value [2] (stream = %i, delta: -%ld, max jitter = %ld): wrong interrupt acknowledge?\n", substream->stream, (long) delta, runtime->buffer_size / 2);
                                 if (substream->pstr->xrun_debug > 1)
diff --git a/sound/core/pcm_memory.c b/sound/core/pcm_memory.c
index a0119ae67dcd..428f8c169ee1 100644
--- a/sound/core/pcm_memory.c
+++ b/sound/core/pcm_memory.c
@@ -100,8 +100,10 @@ static void snd_pcm_lib_preallocate_dma_free(struct snd_pcm_substream *substream
 int snd_pcm_lib_preallocate_free(struct snd_pcm_substream *substream)
 {
         snd_pcm_lib_preallocate_dma_free(substream);
+#ifdef CONFIG_SND_VERBOSE_PROCFS
         snd_info_unregister(substream->proc_prealloc_entry);
         substream->proc_prealloc_entry = NULL;
+#endif
         return 0;
 }
 
@@ -124,7 +126,7 @@ int snd_pcm_lib_preallocate_free_for_all(struct snd_pcm *pcm)
         return 0;
 }
 
-#ifdef CONFIG_PROC_FS
+#ifdef CONFIG_SND_VERBOSE_PROCFS
 /*
  * read callback for prealloc proc file
  *
@@ -203,9 +205,9 @@ static inline void preallocate_info_init(struct snd_pcm_substream *substream)
         substream->proc_prealloc_entry = entry;
 }
 
-#else /* !CONFIG_PROC_FS */
+#else /* !CONFIG_SND_VERBOSE_PROCFS */
 #define preallocate_info_init(s)
-#endif
+#endif /* CONFIG_SND_VERBOSE_PROCFS */
 
 /*
  * pre-allocate the buffer and create a proc file for the substream
diff --git a/sound/drivers/dummy.c b/sound/drivers/dummy.c
index e35fd5779a9d..ae0df549fac7 100644
--- a/sound/drivers/dummy.c
+++ b/sound/drivers/dummy.c
@@ -675,10 +675,8 @@ static int __init alsa_card_dummy_init(void)
                         continue;
                 device = platform_device_register_simple(SND_DUMMY_DRIVER,
                                                          i, NULL, 0);
-                if (IS_ERR(device)) {
-                        err = PTR_ERR(device);
-                        goto errout;
-                }
+                if (IS_ERR(device))
+                        continue;
                 devices[i] = device;
                 cards++;
         }
@@ -686,14 +684,10 @@ static int __init alsa_card_dummy_init(void)
 #ifdef MODULE
                 printk(KERN_ERR "Dummy soundcard not found or device busy\n");
 #endif
-                err = -ENODEV;
-                goto errout;
+                snd_dummy_unregister_all();
+                return -ENODEV;
         }
         return 0;
-
- errout:
-        snd_dummy_unregister_all();
-        return err;
 }
 
 static void __exit alsa_card_dummy_exit(void)
diff --git a/sound/drivers/mpu401/mpu401.c b/sound/drivers/mpu401/mpu401.c
index 9ea3059a7064..da7ef26995c3 100644
--- a/sound/drivers/mpu401/mpu401.c
+++ b/sound/drivers/mpu401/mpu401.c
@@ -251,10 +251,8 @@ static int __init alsa_card_mpu401_init(void)
 #endif
                 device = platform_device_register_simple(SND_MPU401_DRIVER,
                                                          i, NULL, 0);
-                if (IS_ERR(device)) {
-                        err = PTR_ERR(device);
-                        goto errout;
-                }
+                if (IS_ERR(device))
+                        continue;
                 platform_devices[i] = device;
                 snd_mpu401_devices++;
         }
@@ -266,14 +264,10 @@ static int __init alsa_card_mpu401_init(void)
 #ifdef MODULE
                 printk(KERN_ERR "MPU-401 device not found or device busy\n");
 #endif
-                err = -ENODEV;
-                goto errout;
+                snd_mpu401_unregister_all();
+                return -ENODEV;
         }
         return 0;
-
- errout:
-        snd_mpu401_unregister_all();
-        return err;
 }
 
 static void __exit alsa_card_mpu401_exit(void)
diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c
index 1a7fbefe4740..c01b4c5118b9 100644
--- a/sound/drivers/serial-u16550.c
+++ b/sound/drivers/serial-u16550.c
@@ -996,10 +996,8 @@ static int __init alsa_card_serial_init(void)
                         continue;
                 device = platform_device_register_simple(SND_SERIAL_DRIVER,
                                                          i, NULL, 0);
-                if (IS_ERR(device)) {
-                        err = PTR_ERR(device);
-                        goto errout;
-                }
+                if (IS_ERR(device))
+                        continue;
                 devices[i] = device;
                 cards++;
         }
@@ -1007,14 +1005,10 @@ static int __init alsa_card_serial_init(void)
 #ifdef MODULE
                 printk(KERN_ERR "serial midi soundcard not found or device busy\n");
 #endif
-                err = -ENODEV;
-                goto errout;
+                snd_serial_unregister_all();
+                return -ENODEV;
         }
         return 0;
-
- errout:
-        snd_serial_unregister_all();
-        return err;
 }
 
 static void __exit alsa_card_serial_exit(void)
diff --git a/sound/drivers/virmidi.c b/sound/drivers/virmidi.c
index a3ee306239c9..26eb2499d442 100644
--- a/sound/drivers/virmidi.c
+++ b/sound/drivers/virmidi.c
@@ -169,10 +169,8 @@ static int __init alsa_card_virmidi_init(void)
                         continue;
                 device = platform_device_register_simple(SND_VIRMIDI_DRIVER,
                                                          i, NULL, 0);
-                if (IS_ERR(device)) {
-                        err = PTR_ERR(device);
-                        goto errout;
-                }
+                if (IS_ERR(device))
+                        continue;
                 devices[i] = device;
                 cards++;
         }
@@ -180,14 +178,10 @@ static int __init alsa_card_virmidi_init(void)
 #ifdef MODULE
                 printk(KERN_ERR "Card-VirMIDI soundcard not found or device busy\n");
 #endif
-                err = -ENODEV;
-                goto errout;
+                snd_virmidi_unregister_all();
+                return -ENODEV;
         }
         return 0;
-
- errout:
-        snd_virmidi_unregister_all();
-        return err;
 }
 
 static void __exit alsa_card_virmidi_exit(void)
diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c
index 83d64bc07ff0..e6bfcf74c1c1 100644
--- a/sound/isa/opti9xx/miro.c
+++ b/sound/isa/opti9xx/miro.c
@@ -1179,20 +1179,17 @@ static int __init snd_card_miro_aci_detect(struct snd_card *card, struct snd_mir
         /* force ACI into a known state */
         for (i = 0; i < 3; i++)
                 if (aci_cmd(miro, ACI_ERROR_OP, -1, -1) < 0) {
-                        snd_card_free(card);
                         snd_printk(KERN_ERR "can't force aci into known state.\n");
                         return -ENXIO;
                 }
 
         if ((miro->aci_vendor=aci_cmd(miro, ACI_READ_IDCODE, -1, -1)) < 0 ||
             (miro->aci_product=aci_cmd(miro, ACI_READ_IDCODE, -1, -1)) < 0) {
-                snd_card_free(card);
                 snd_printk(KERN_ERR "can't read aci id on 0x%lx.\n", miro->aci_port);
                 return -ENXIO;
         }
 
         if ((miro->aci_version=aci_cmd(miro, ACI_READ_VERSION, -1, -1)) < 0) {
-                snd_card_free(card);
                 snd_printk(KERN_ERR "can't read aci version on 0x%lx.\n", 
                            miro->aci_port);
                 return -ENXIO;
diff --git a/sound/pci/ad1889.c b/sound/pci/ad1889.c
index c6c8333acc62..eece1c7e55a0 100644
--- a/sound/pci/ad1889.c
+++ b/sound/pci/ad1889.c
@@ -39,7 +39,6 @@
 #include <linux/interrupt.h>
 #include <linux/compiler.h>
 #include <linux/delay.h>
-#include <linux/dma-mapping.h>
 
 #include <sound/driver.h>
 #include <sound/core.h>
@@ -1052,7 +1051,7 @@ snd_ad1889_remove(struct pci_dev *pci)
         pci_set_drvdata(pci, NULL);
 }
 
-static struct pci_device_id snd_ad1889_ids[] = {
+static struct pci_device_id snd_ad1889_ids[] __devinitdata = {
         { PCI_DEVICE(PCI_VENDOR_ID_ANALOG_DEVICES, PCI_DEVICE_ID_AD1889JS) },
         { 0, },
 };
diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c
index fc92b6896c24..e2dbc2118902 100644
--- a/sound/pci/ali5451/ali5451.c
+++ b/sound/pci/ali5451/ali5451.c
@@ -279,7 +279,7 @@ struct snd_ali {
 #endif
 };
 
-static struct pci_device_id snd_ali_ids[] = {
+static struct pci_device_id snd_ali_ids[] __devinitdata = {
         {PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5451), 0, 0, 0},
         {0, }
 };
diff --git a/sound/pci/als300.c b/sound/pci/als300.c
index 91899f87f037..901b08ae9174 100644
--- a/sound/pci/als300.c
+++ b/sound/pci/als300.c
@@ -146,7 +146,7 @@ struct snd_als300_substream_data {
         int block_counter_register;
 };
 
-static struct pci_device_id snd_als300_ids[] = {
+static struct pci_device_id snd_als300_ids[] __devinitdata = {
         { 0x4005, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALS300 },
         { 0x4005, 0x0308, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALS300_PLUS },
         { 0, }
diff --git a/sound/pci/als4000.c b/sound/pci/als4000.c
index 100d8127a411..60423b1c678b 100644
--- a/sound/pci/als4000.c
+++ b/sound/pci/als4000.c
@@ -116,7 +116,7 @@ struct snd_card_als4000 {
 #endif
 };
 
-static struct pci_device_id snd_als4000_ids[] = {
+static struct pci_device_id snd_als4000_ids[] __devinitdata = {
         { 0x4005, 0x4000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* ALS4000 */
         { 0, }
 };
diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c
index 12e618851262..d0f759d86d3d 100644
--- a/sound/pci/atiixp.c
+++ b/sound/pci/atiixp.c
@@ -284,7 +284,7 @@ struct atiixp {
 
 /*
  */
-static struct pci_device_id snd_atiixp_ids[] = {
+static struct pci_device_id snd_atiixp_ids[] __devinitdata = {
         { 0x1002, 0x4341, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */
         { 0x1002, 0x4361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB300 */
         { 0x1002, 0x4370, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */
diff --git a/sound/pci/atiixp_modem.c b/sound/pci/atiixp_modem.c
index 1d3766044643..12a34c39caa7 100644
--- a/sound/pci/atiixp_modem.c
+++ b/sound/pci/atiixp_modem.c
@@ -262,7 +262,7 @@ struct atiixp_modem {
 
 /*
  */
-static struct pci_device_id snd_atiixp_ids[] = {
+static struct pci_device_id snd_atiixp_ids[] __devinitdata = {
         { 0x1002, 0x434d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */
         { 0x1002, 0x4378, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */
         { 0, }
diff --git a/sound/pci/au88x0/au8810.c b/sound/pci/au88x0/au8810.c
index fce22c7af0ea..bd3352998ad0 100644
--- a/sound/pci/au88x0/au8810.c
+++ b/sound/pci/au88x0/au8810.c
@@ -1,6 +1,6 @@
 #include "au8810.h"
 #include "au88x0.h"
-static struct pci_device_id snd_vortex_ids[] = {
+static struct pci_device_id snd_vortex_ids[] __devinitdata = {
         {PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_ADVANTAGE,
          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1,},
         {0,}
diff --git a/sound/pci/au88x0/au8820.c b/sound/pci/au88x0/au8820.c
index d1fbcce07257..7e3fd8372d8d 100644
--- a/sound/pci/au88x0/au8820.c
+++ b/sound/pci/au88x0/au8820.c
@@ -1,6 +1,6 @@
 #include "au8820.h"
 #include "au88x0.h"
-static struct pci_device_id snd_vortex_ids[] = {
+static struct pci_device_id snd_vortex_ids[] __devinitdata = {
         {PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_1,
          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
         {0,}
diff --git a/sound/pci/au88x0/au8830.c b/sound/pci/au88x0/au8830.c
index d4f2717c14fb..b840f6608a61 100644
--- a/sound/pci/au88x0/au8830.c
+++ b/sound/pci/au88x0/au8830.c
@@ -1,6 +1,6 @@
 #include "au8830.h"
 #include "au88x0.h"
-static struct pci_device_id snd_vortex_ids[] = {
+static struct pci_device_id snd_vortex_ids[] __devinitdata = {
         {PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_2,
          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
         {0,}
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index 680077e1e057..52a364524262 100644
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -216,7 +216,7 @@ struct snd_azf3328 {
         int irq;
 };
 
-static const struct pci_device_id snd_azf3328_ids[] = {
+static const struct pci_device_id snd_azf3328_ids[] __devinitdata = {
         { 0x122D, 0x50DC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },   /* PCI168/3328 */
         { 0x122D, 0x80DA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },   /* 3328 */
         { 0, }
diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c
index 7b44a8db033d..9ee07d4aac1e 100644
--- a/sound/pci/bt87x.c
+++ b/sound/pci/bt87x.c
@@ -774,7 +774,7 @@ static int __devinit snd_bt87x_create(struct snd_card *card,
           .driver_data = rate }
 
 /* driver_data is the default digital_rate value for that device */
-static struct pci_device_id snd_bt87x_ids[] = {
+static struct pci_device_id snd_bt87x_ids[] __devinitdata = {
         /* Hauppauge WinTV series */
         BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x0070, 0x13eb, 32000),
         /* Hauppauge WinTV series */
@@ -911,7 +911,7 @@ static void __devexit snd_bt87x_remove(struct pci_dev *pci)
 
 /* default entries for all Bt87x cards - it's not exported */
 /* driver_data is set to 0 to call detection */
-static struct pci_device_id snd_bt87x_default_ids[] = {
+static struct pci_device_id snd_bt87x_default_ids[] __devinitdata = {
         BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, PCI_ANY_ID, PCI_ANY_ID, 0),
         BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_879, PCI_ANY_ID, PCI_ANY_ID, 0),
         { }
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 9477838a9c88..fd8bfebfbd54 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -1561,7 +1561,7 @@ static void __devexit snd_ca0106_remove(struct pci_dev *pci)
 }
 
 // PCI IDs
-static struct pci_device_id snd_ca0106_ids[] = {
+static struct pci_device_id snd_ca0106_ids[] __devinitdata = {
         { 0x1102, 0x0007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },    /* Audigy LS or Live 24bit */
         { 0, }
 };
diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c
index 2ecbddbbdcf0..e5ce2dabd081 100644
--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -2609,7 +2609,7 @@ static inline void snd_cmipci_proc_init(struct cmipci *cm) {}
 #endif
 
 
-static struct pci_device_id snd_cmipci_ids[] = {
+static struct pci_device_id snd_cmipci_ids[] __devinitdata = {
         {PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
         {PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
         {PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
diff --git a/sound/pci/cs4281.c b/sound/pci/cs4281.c
index ac4e73f69c1d..b3c94d83450a 100644
--- a/sound/pci/cs4281.c
+++ b/sound/pci/cs4281.c
@@ -494,7 +494,7 @@ struct cs4281 {
 
 static irqreturn_t snd_cs4281_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 
-static struct pci_device_id snd_cs4281_ids[] = {
+static struct pci_device_id snd_cs4281_ids[] __devinitdata = {
         { 0x1013, 0x6005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* CS4281 */
         { 0, }
 };
diff --git a/sound/pci/cs46xx/cs46xx.c b/sound/pci/cs46xx/cs46xx.c
index c590602e20cd..848d772ae3c6 100644
--- a/sound/pci/cs46xx/cs46xx.c
+++ b/sound/pci/cs46xx/cs46xx.c
@@ -65,7 +65,7 @@ MODULE_PARM_DESC(thinkpad, "Force to enable Thinkpad's CLKRUN control.");
 module_param_array(mmap_valid, bool, NULL, 0444);
 MODULE_PARM_DESC(mmap_valid, "Support OSS mmap.");
 
-static struct pci_device_id snd_cs46xx_ids[] = {
+static struct pci_device_id snd_cs46xx_ids[] __devinitdata = {
         { 0x1013, 0x6001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* CS4280 */
         { 0x1013, 0x6003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* CS4612 */
         { 0x1013, 0x6004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* CS4615 */
diff --git a/sound/pci/cs5535audio/cs5535audio.c b/sound/pci/cs5535audio/cs5535audio.c
index 9fc7f3827461..2c1213a35dcc 100644
--- a/sound/pci/cs5535audio/cs5535audio.c
+++ b/sound/pci/cs5535audio/cs5535audio.c
@@ -45,7 +45,7 @@ static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
 static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
 static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
 
-static struct pci_device_id snd_cs5535audio_ids[] = {
+static struct pci_device_id snd_cs5535audio_ids[] __devinitdata = {
         { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_AUDIO,
           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
         { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_AUDIO,
diff --git a/sound/pci/emu10k1/emu10k1.c b/sound/pci/emu10k1/emu10k1.c
index 2dfa932f7825..42b11ba1d210 100644
--- a/sound/pci/emu10k1/emu10k1.c
+++ b/sound/pci/emu10k1/emu10k1.c
@@ -77,7 +77,7 @@ MODULE_PARM_DESC(subsystem, "Force card subsystem model.");
 /*
  * Class 0401: 1102:0008 (rev 00) Subsystem: 1102:1001 -> Audigy2 Value  Model:SB0400
  */
-static struct pci_device_id snd_emu10k1_ids[] = {
+static struct pci_device_id snd_emu10k1_ids[] __devinitdata = {
         { 0x1102, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },    /* EMU10K1 */
         { 0x1102, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },    /* Audigy */
         { 0x1102, 0x0008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },    /* Audigy 2 Value SB0400 */
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 3e332f398162..d51290c18167 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -36,7 +36,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
 #include <linux/moduleparam.h>
-#include <linux/dma-mapping.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/pcm.h>
@@ -1596,7 +1595,7 @@ static void __devexit snd_emu10k1x_remove(struct pci_dev *pci)
 }
 
 // PCI IDs
-static struct pci_device_id snd_emu10k1x_ids[] = {
+static struct pci_device_id snd_emu10k1x_ids[] __devinitdata = {
         { 0x1102, 0x0006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },    /* Dell OEM version (EMU10K1) */
         { 0, }
 };
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index a5533c86b0b6..ca9e34e88f62 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -446,7 +446,7 @@ struct ensoniq {
 
 static irqreturn_t snd_audiopci_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 
-static struct pci_device_id snd_audiopci_ids[] = {
+static struct pci_device_id snd_audiopci_ids[] __devinitdata = {
 #ifdef CHIP1370
         { 0x1274, 0x5000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* ES1370 */
 #endif
diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c
index 4d62fe439177..6f9094ca4fb4 100644
--- a/sound/pci/es1938.c
+++ b/sound/pci/es1938.c
@@ -242,7 +242,7 @@ struct es1938 {
 
 static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 
-static struct pci_device_id snd_es1938_ids[] = {
+static struct pci_device_id snd_es1938_ids[] __devinitdata = {
         { 0x125d, 0x1969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* Solo-1 */
         { 0, }
 };
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index e3ad17f53c29..5ff4175c7b6d 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -104,7 +104,6 @@
 #include <linux/slab.h>
 #include <linux/gameport.h>
 #include <linux/moduleparam.h>
-#include <linux/dma-mapping.h>
 #include <linux/mutex.h>
 
 #include <sound/core.h>
@@ -593,7 +592,7 @@ struct es1968 {
 
 static irqreturn_t snd_es1968_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 
-static struct pci_device_id snd_es1968_ids[] = {
+static struct pci_device_id snd_es1968_ids[] __devinitdata = {
         /* Maestro 1 */
         { 0x1285, 0x0100, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, TYPE_MAESTRO },
         /* Maestro 2 */
diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
index 6ab4aefbccf8..d72fc28c580e 100644
--- a/sound/pci/fm801.c
+++ b/sound/pci/fm801.c
@@ -199,7 +199,7 @@ struct fm801 {
 #endif
 };
 
-static struct pci_device_id snd_fm801_ids[] = {
+static struct pci_device_id snd_fm801_ids[] __devinitdata = {
         { 0x1319, 0x0801, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0, },   /* FM801 */
         { 0x5213, 0x0510, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0, },   /* Gallant Odyssey Sound 4 */
         { 0, }
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 0ad60ae29011..e821d65afa11 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1614,7 +1614,7 @@ static void __devexit azx_remove(struct pci_dev *pci)
 }
 
 /* PCI IDs */
-static struct pci_device_id azx_ids[] = {
+static struct pci_device_id azx_ids[] __devinitdata = {
         { 0x8086, 0x2668, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH6 */
         { 0x8086, 0x27d8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH7 */
         { 0x8086, 0x269a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ESB2 */
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index bcfca159c6a2..40f000ba1362 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -799,10 +799,14 @@ static struct hda_board_config ad1986a_cfg_tbl[] = {
         { .modelname = "laptop-eapd",   .config = AD1986A_LAPTOP_EAPD },
         { .pci_subvendor = 0x144d, .pci_subdevice = 0xc024,
           .config = AD1986A_LAPTOP_EAPD }, /* Samsung R65-T2300 Charis */
+        { .pci_subvendor = 0x1043, .pci_subdevice = 0x1153,
+          .config = AD1986A_LAPTOP_EAPD }, /* ASUS M9 */
         { .pci_subvendor = 0x1043, .pci_subdevice = 0x1213,
           .config = AD1986A_LAPTOP_EAPD }, /* ASUS A6J */
         { .pci_subvendor = 0x1043, .pci_subdevice = 0x11f7,
           .config = AD1986A_LAPTOP_EAPD }, /* ASUS U5A */
+        { .pci_subvendor = 0x1043, .pci_subdevice = 0x1297,
+          .config = AD1986A_LAPTOP_EAPD }, /* ASUS Z62F */
         { .pci_subvendor = 0x103c, .pci_subdevice = 0x30af,
           .config = AD1986A_LAPTOP_EAPD }, /* HP Compaq Presario B2800 */
         {}
@@ -1330,12 +1334,8 @@ enum { AD1981_BASIC, AD1981_HP };
 
 static struct hda_board_config ad1981_cfg_tbl[] = {
         { .modelname = "hp", .config = AD1981_HP },
-        { .pci_subvendor = 0x103c, .pci_subdevice = 0x30aa,
-          .config = AD1981_HP }, /* HP nx6320 */
-        { .pci_subvendor = 0x103c, .pci_subdevice = 0x309f,
-          .config = AD1981_HP }, /* HP nx9420 AngelFire */
-        { .pci_subvendor = 0x103c, .pci_subdevice = 0x30a2,
-          .config = AD1981_HP }, /* HP nx9420 AngelFire */
+        /* All HP models */
+        { .pci_subvendor = 0x103c, .config = AD1981_HP },
         { .modelname = "basic", .config = AD1981_BASIC },
         {}
 };
@@ -2623,5 +2623,6 @@ struct hda_codec_preset snd_hda_preset_analog[] = {
         { .id = 0x11d41983, .name = "AD1983", .patch = patch_ad1983 },
         { .id = 0x11d41986, .name = "AD1986A", .patch = patch_ad1986a },
         { .id = 0x11d41988, .name = "AD1988", .patch = patch_ad1988 },
+        { .id = 0x11d4198b, .name = "AD1988B", .patch = patch_ad1988 },
         {} /* terminator */
 };
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 66bbdb60f50b..f0e9a9c90780 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2148,6 +2148,7 @@ static struct hda_board_config alc880_cfg_tbl[] = {
         { .pci_subvendor = 0x1025, .pci_subdevice = 0x0087, .config = ALC880_6ST_DIG },
         { .pci_subvendor = 0x1297, .pci_subdevice = 0xc790, .config = ALC880_6ST_DIG }, /* Shuttle ST20G5 */
         { .pci_subvendor = 0x1509, .pci_subdevice = 0x925d, .config = ALC880_6ST_DIG }, /* FIC P4M-915GD1 */
+        { .pci_subvendor = 0x1695, .pci_subdevice = 0x4012, .config = ALC880_5ST_DIG }, /* Epox EP-5LDA+ GLi */
 
         { .modelname = "asus", .config = ALC880_ASUS },
         { .pci_subvendor = 0x1043, .pci_subdevice = 0x1964, .config = ALC880_ASUS_DIG },
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 715260787953..8c440fb98603 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1212,8 +1212,8 @@ static hda_nid_t vaio_mux_nids[] = { 0x15 };
 static struct hda_input_mux vaio_mux = {
         .num_items = 2,
         .items = {
-                /* { "HP", 0x0 },
-                   { "Unknown", 0x1 }, */
+                /* { "HP", 0x0 }, */
+                { "Line", 0x1 },
                 { "Mic", 0x2 },
                 { "PCM", 0x3 },
         }
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 32f8415558a5..c56793b381e2 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -56,7 +56,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
 #include <linux/moduleparam.h>
-#include <linux/dma-mapping.h>
 #include <linux/mutex.h>
 
 #include <sound/core.h>
@@ -108,7 +107,7 @@ module_param_array(dxr_enable, int, NULL, 0444);
 MODULE_PARM_DESC(dxr_enable, "Enable DXR support for Terratec DMX6FIRE.");
 
 
-static struct pci_device_id snd_ice1712_ids[] = {
+static struct pci_device_id snd_ice1712_ids[] __devinitdata = {
         { PCI_VENDOR_ID_ICE, PCI_DEVICE_ID_ICE_1712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },   /* ICE1712 */
         { 0, }
 };
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index fce616c2761f..b1c007e022d2 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -86,7 +86,7 @@ MODULE_PARM_DESC(model, "Use the given board model.");
 
 
 /* Both VT1720 and VT1724 have the same PCI IDs */
-static struct pci_device_id snd_vt1724_ids[] = {
+static struct pci_device_id snd_vt1724_ids[] __devinitdata = {
         { PCI_VENDOR_ID_ICE, PCI_DEVICE_ID_VT1724, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
         { 0, }
 };
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index ebbf2cf4ca0f..0df7602568e2 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -413,7 +413,7 @@ struct intel8x0 {
         u32 int_sta_mask;               /* interrupt status mask */
 };
 
-static struct pci_device_id snd_intel8x0_ids[] = {
+static struct pci_device_id snd_intel8x0_ids[] __devinitdata = {
         { 0x8086, 0x2415, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801AA */
         { 0x8086, 0x2425, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82901AB */
         { 0x8086, 0x2445, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801BA */
@@ -1293,6 +1293,7 @@ static int snd_intel8x0_ali_ac97spdifout_close(struct snd_pcm_substream *substre
         return 0;
 }
 
+#if 0 // NYI
 static int snd_intel8x0_ali_spdifin_open(struct snd_pcm_substream *substream)
 {
         struct intel8x0 *chip = snd_pcm_substream_chip(substream);
@@ -1308,7 +1309,6 @@ static int snd_intel8x0_ali_spdifin_close(struct snd_pcm_substream *substream)
         return 0;
 }
 
-#if 0 // NYI
 static int snd_intel8x0_ali_spdifout_open(struct snd_pcm_substream *substream)
 {
         struct intel8x0 *chip = snd_pcm_substream_chip(substream);
@@ -1435,6 +1435,7 @@ static struct snd_pcm_ops snd_intel8x0_ali_ac97spdifout_ops = {
         .pointer =      snd_intel8x0_pcm_pointer,
 };
 
+#if 0 // NYI
 static struct snd_pcm_ops snd_intel8x0_ali_spdifin_ops = {
         .open =         snd_intel8x0_ali_spdifin_open,
         .close =        snd_intel8x0_ali_spdifin_close,
@@ -1446,7 +1447,6 @@ static struct snd_pcm_ops snd_intel8x0_ali_spdifin_ops = {
         .pointer =      snd_intel8x0_pcm_pointer,
 };
 
-#if 0 // NYI
 static struct snd_pcm_ops snd_intel8x0_ali_spdifout_ops = {
         .open =         snd_intel8x0_ali_spdifout_open,
         .close =        snd_intel8x0_ali_spdifout_close,
@@ -1582,7 +1582,7 @@ static struct ich_pcm_table ali_pcms[] __devinitdata = {
         {
                 .suffix = "IEC958",
                 .playback_ops = &snd_intel8x0_ali_ac97spdifout_ops,
-                .capture_ops = &snd_intel8x0_ali_spdifin_ops,
+                /* .capture_ops = &snd_intel8x0_ali_spdifin_ops, */
                 .prealloc_size = 64 * 1024,
                 .prealloc_max_size = 128 * 1024,
                 .ac97_idx = ALID_AC97SPDIFOUT,
diff --git a/sound/pci/intel8x0m.c b/sound/pci/intel8x0m.c
index 47e26aaa9ad7..720635f0cb81 100644
--- a/sound/pci/intel8x0m.c
+++ b/sound/pci/intel8x0m.c
@@ -224,7 +224,7 @@ struct intel8x0m {
         unsigned int pcm_pos_shift;
 };
 
-static struct pci_device_id snd_intel8x0m_ids[] = {
+static struct pci_device_id snd_intel8x0m_ids[] __devinitdata = {
         { 0x8086, 0x2416, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801AA */
         { 0x8086, 0x2426, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82901AB */
         { 0x8086, 0x2446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801BA */
diff --git a/sound/pci/korg1212/korg1212.c b/sound/pci/korg1212/korg1212.c
index 4721c096335e..e39fad1a4200 100644
--- a/sound/pci/korg1212/korg1212.c
+++ b/sound/pci/korg1212/korg1212.c
@@ -424,7 +424,7 @@ module_param_array(enable, bool, NULL, 0444);
 MODULE_PARM_DESC(enable, "Enable Korg 1212 soundcard.");
 MODULE_AUTHOR("Haroldo Gamal <gamal@alternex.com.br>");
 
-static struct pci_device_id snd_korg1212_ids[] = {
+static struct pci_device_id snd_korg1212_ids[] __devinitdata = {
         {
                 .vendor    = 0x10b5,
                 .device    = 0x906d,
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index 9c90d901e6b9..1928e06b6d82 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -41,7 +41,6 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/moduleparam.h>
-#include <linux/dma-mapping.h>
 #include <sound/core.h>
 #include <sound/info.h>
 #include <sound/control.h>
@@ -870,7 +869,7 @@ struct snd_m3 {
 /*
  * pci ids
  */
-static struct pci_device_id snd_m3_ids[] = {
+static struct pci_device_id snd_m3_ids[] __devinitdata = {
         {PCI_VENDOR_ID_ESS, PCI_DEVICE_ID_ESS_ALLEGRO_1, PCI_ANY_ID, PCI_ANY_ID,
          PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0},
         {PCI_VENDOR_ID_ESS, PCI_DEVICE_ID_ESS_ALLEGRO, PCI_ANY_ID, PCI_ANY_ID,
diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c
index b5a095052d4c..09cc0786495a 100644
--- a/sound/pci/mixart/mixart.c
+++ b/sound/pci/mixart/mixart.c
@@ -28,7 +28,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/moduleparam.h>
 #include <linux/mutex.h>
-#include <linux/dma-mapping.h>
 
 #include <sound/core.h>
 #include <sound/initval.h>
@@ -62,7 +61,7 @@ MODULE_PARM_DESC(enable, "Enable Digigram " CARD_NAME " soundcard.");
 /*
  */
 
-static struct pci_device_id snd_mixart_ids[] = {
+static struct pci_device_id snd_mixart_ids[] __devinitdata = {
         { 0x1057, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* MC8240 */
         { 0, }
 };
diff --git a/sound/pci/nm256/nm256.c b/sound/pci/nm256/nm256.c
index cc297abc9d11..b92d6600deb9 100644
--- a/sound/pci/nm256/nm256.c
+++ b/sound/pci/nm256/nm256.c
@@ -263,7 +263,7 @@ struct nm256 {
 /*
  * PCI ids
  */
-static struct pci_device_id snd_nm256_ids[] = {
+static struct pci_device_id snd_nm256_ids[] __devinitdata = {
         {PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
         {PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
         {PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c
index 35875c8aa299..dafa2235abaa 100644
--- a/sound/pci/pcxhr/pcxhr.c
+++ b/sound/pci/pcxhr/pcxhr.c
@@ -30,7 +30,6 @@
 #include <linux/delay.h>
 #include <linux/moduleparam.h>
 #include <linux/mutex.h>
-#include <linux/dma-mapping.h>
 
 #include <sound/core.h>
 #include <sound/initval.h>
@@ -74,7 +73,7 @@ enum {
         PCI_ID_LAST
 };
 
-static struct pci_device_id pcxhr_ids[] = {
+static struct pci_device_id pcxhr_ids[] __devinitdata = {
         { 0x10b5, 0x9656, 0x1369, 0xb001, 0, 0, PCI_ID_VX882HR, },   /* VX882HR */
         { 0x10b5, 0x9656, 0x1369, 0xb101, 0, 0, PCI_ID_PCX882HR, },  /* PCX882HR */
         { 0x10b5, 0x9656, 0x1369, 0xb201, 0, 0, PCI_ID_VX881HR, },   /* VX881HR */
diff --git a/sound/pci/pcxhr/pcxhr_hwdep.c b/sound/pci/pcxhr/pcxhr_hwdep.c
index 03517c10e99c..369c19fea985 100644
--- a/sound/pci/pcxhr/pcxhr_hwdep.c
+++ b/sound/pci/pcxhr/pcxhr_hwdep.c
@@ -385,8 +385,8 @@ static int pcxhr_hwdep_dsp_load(struct snd_hwdep *hw,
         fw.size = dsp->length;
         fw.data = vmalloc(fw.size);
         if (! fw.data) {
-                snd_printk(KERN_ERR "pcxhr: cannot allocate dsp image (%d bytes)\n",
-                           fw.size);
+                snd_printk(KERN_ERR "pcxhr: cannot allocate dsp image (%lu bytes)\n",
+                           (unsigned long)fw.size);
                 return -ENOMEM;
         }
         if (copy_from_user(fw.data, dsp->image, dsp->length)) {
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index f148ee434a6b..d8cc985d7241 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -506,7 +506,7 @@ static int riptide_reset(struct cmdif *cif, struct snd_riptide *chip);
 /*
  */
 
-static struct pci_device_id snd_riptide_ids[] = {
+static struct pci_device_id snd_riptide_ids[] __devinitdata = {
         {
          .vendor = 0x127a,.device = 0x4310,
          .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
@@ -527,7 +527,7 @@ static struct pci_device_id snd_riptide_ids[] = {
 };
 
 #ifdef SUPPORT_JOYSTICK
-static struct pci_device_id snd_riptide_joystick_ids[] = {
+static struct pci_device_id snd_riptide_joystick_ids[] __devinitdata = {
         {
          .vendor = 0x127a,.device = 0x4312,
          .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
diff --git a/sound/pci/rme32.c b/sound/pci/rme32.c
index ab78544bf042..55b1d4838d97 100644
--- a/sound/pci/rme32.c
+++ b/sound/pci/rme32.c
@@ -227,7 +227,7 @@ struct rme32 {
         struct snd_kcontrol *spdif_ctl;
 };
 
-static struct pci_device_id snd_rme32_ids[] = {
+static struct pci_device_id snd_rme32_ids[] __devinitdata = {
         {PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32,
          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
         {PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_8,
diff --git a/sound/pci/rme96.c b/sound/pci/rme96.c
index 6c2a9f4a7659..3c1bc533d511 100644
--- a/sound/pci/rme96.c
+++ b/sound/pci/rme96.c
@@ -232,7 +232,7 @@ struct rme96 {
         struct snd_kcontrol   *spdif_ctl;
 };
 
-static struct pci_device_id snd_rme96_ids[] = {
+static struct pci_device_id snd_rme96_ids[] __devinitdata = {
         { PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96,
           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
         { PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8,
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index ebf7a2b86c23..61f82f0d5cc6 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -568,7 +568,7 @@ static void snd_hammerfall_free_buffer(struct snd_dma_buffer *dmab, struct pci_d
 }
 
 
-static struct pci_device_id snd_hdsp_ids[] = {
+static struct pci_device_id snd_hdsp_ids[] __devinitdata = {
         {
                 .vendor = PCI_VENDOR_ID_XILINX,
                 .device = PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP, 
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index b5538efd146b..722b9e6ce54a 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -426,7 +426,7 @@ static char channel_map_madi_qs[HDSPM_MAX_CHANNELS] = {
 };
 
 
-static struct pci_device_id snd_hdspm_ids[] = {
+static struct pci_device_id snd_hdspm_ids[] __devinitdata = {
         {
          .vendor = PCI_VENDOR_ID_XILINX,
          .device = PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP_MADI,
diff --git a/sound/pci/rme9652/rme9652.c b/sound/pci/rme9652/rme9652.c
index a687eb63236f..75d6406303d3 100644
--- a/sound/pci/rme9652/rme9652.c
+++ b/sound/pci/rme9652/rme9652.c
@@ -315,7 +315,7 @@ static void snd_hammerfall_free_buffer(struct snd_dma_buffer *dmab, struct pci_d
 }
 
 
-static struct pci_device_id snd_rme9652_ids[] = {
+static struct pci_device_id snd_rme9652_ids[] __devinitdata = {
         {
                 .vendor    = 0x10ee,
                 .device    = 0x3fc4,
diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c
index 2d66a09fe5ee..91f8bf3ae9fa 100644
--- a/sound/pci/sonicvibes.c
+++ b/sound/pci/sonicvibes.c
@@ -243,7 +243,7 @@ struct sonicvibes {
 #endif
 };
 
-static struct pci_device_id snd_sonic_ids[] = {
+static struct pci_device_id snd_sonic_ids[] __devinitdata = {
         { 0x5333, 0xca00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
         { 0, }
 };
diff --git a/sound/pci/trident/trident.c b/sound/pci/trident/trident.c
index b4538045049f..9624a5f2b875 100644
--- a/sound/pci/trident/trident.c
+++ b/sound/pci/trident/trident.c
@@ -63,7 +63,7 @@ MODULE_PARM_DESC(pcm_channels, "Number of hardware channels assigned for PCM.");
 module_param_array(wavetable_size, int, NULL, 0444);
 MODULE_PARM_DESC(wavetable_size, "Maximum memory size in kB for wavetable synth.");
 
-static struct pci_device_id snd_trident_ids[] = {
+static struct pci_device_id snd_trident_ids[] __devinitdata = {
         {PCI_DEVICE(PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_TRIDENT_4DWAVE_DX), 
                 PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0},
         {PCI_DEVICE(PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_TRIDENT_4DWAVE_NX), 
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 0f171dd1377b..39daf62d2bad 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -123,6 +123,7 @@ module_param(enable, bool, 0444);
 #define VIA_REV_8233A           0x40    /* 1 rec, 1 multi-pb, spdf */
 #define VIA_REV_8235            0x50    /* 2 rec, 4 pb, 1 multi-pb, spdif */
 #define VIA_REV_8237            0x60
+#define VIA_REV_8251            0x70
 
 /*
  *  Direct registers
@@ -395,7 +396,7 @@ struct via82xx {
 #endif
 };
 
-static struct pci_device_id snd_via82xx_ids[] = {
+static struct pci_device_id snd_via82xx_ids[] __devinitdata = {
         /* 0x1106, 0x3058 */
         { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA686, },     /* 686A */
         /* 0x1106, 0x3059 */
@@ -862,6 +863,11 @@ static snd_pcm_uframes_t snd_via8233_pcm_pointer(struct snd_pcm_substream *subst
         if (!status)
                 status = inb(VIADEV_REG(viadev, OFFSET_STATUS));
 
+        /* An apparent bug in the 8251 is worked around by sending a 
+         * REG_CTRL_START. */
+        if (chip->revision == VIA_REV_8251 && (status & VIA_REG_STAT_EOL))
+                snd_via82xx_pcm_trigger(substream, SNDRV_PCM_TRIGGER_START);
+
         if (!(status & VIA_REG_STAT_ACTIVE)) {
                 res = 0;
                 goto unlock;
@@ -2313,6 +2319,7 @@ static struct via823x_info via823x_cards[] __devinitdata = {
         { VIA_REV_8233A, "VIA 8233A", TYPE_VIA8233A },
         { VIA_REV_8235, "VIA 8235", TYPE_VIA8233 },
         { VIA_REV_8237, "VIA 8237", TYPE_VIA8233 },
+        { VIA_REV_8251, "VIA 8251", TYPE_VIA8233 },
 };
 
 /*
@@ -2325,7 +2332,7 @@ struct dxs_whitelist {
         short action;   /* new dxs_support value */
 };
 
-static int __devinit check_dxs_list(struct pci_dev *pci)
+static int __devinit check_dxs_list(struct pci_dev *pci, int revision)
 {
         static struct dxs_whitelist whitelist[] = {
                 { .subvendor = 0x1005, .subdevice = 0x4710, .action = VIA_DXS_ENABLE }, /* Avance Logic Mobo */
@@ -2342,6 +2349,7 @@ static int __devinit check_dxs_list(struct pci_dev *pci)
                 { .subvendor = 0x1043, .subdevice = 0x810d, .action = VIA_DXS_SRC }, /* ASUS */
                 { .subvendor = 0x1043, .subdevice = 0x812a, .action = VIA_DXS_SRC    }, /* ASUS A8V Deluxe */ 
                 { .subvendor = 0x1043, .subdevice = 0x8174, .action = VIA_DXS_SRC    }, /* ASUS */
+                { .subvendor = 0x1043, .subdevice = 0x81b9, .action = VIA_DXS_SRC    }, /* ASUS A8V-MX */
                 { .subvendor = 0x1071, .subdevice = 0x8375, .action = VIA_DXS_NO_VRA }, /* Vobis/Yakumo/Mitac notebook */
                 { .subvendor = 0x1071, .subdevice = 0x8399, .action = VIA_DXS_NO_VRA }, /* Umax AB 595T (VIA K8N800A - VT8237) */
                 { .subvendor = 0x10cf, .subdevice = 0x118e, .action = VIA_DXS_ENABLE }, /* FSC laptop */
@@ -2405,6 +2413,10 @@ static int __devinit check_dxs_list(struct pci_dev *pci)
                 }
         }
 
+        /* for newer revision, default to DXS_SRC */
+        if (revision >= VIA_REV_8235)
+                return VIA_DXS_SRC;
+
         /*
          * not detected, try 48k rate only to be sure.
          */
@@ -2449,7 +2461,7 @@ static int __devinit snd_via82xx_probe(struct pci_dev *pci,
                 }
                 if (chip_type != TYPE_VIA8233A) {
                         if (dxs_support == VIA_DXS_AUTO)
-                                dxs_support = check_dxs_list(pci);
+                                dxs_support = check_dxs_list(pci, revision);
                         /* force to use VIA8233 or 8233A model according to
                          * dxs_support module option
                          */
diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c
index 22ce4d309929..ef97e50cd6c2 100644
--- a/sound/pci/via82xx_modem.c
+++ b/sound/pci/via82xx_modem.c
@@ -261,7 +261,7 @@ struct via82xx_modem {
         struct snd_info_entry *proc_entry;
 };
 
-static struct pci_device_id snd_via82xx_modem_ids[] = {
+static struct pci_device_id snd_via82xx_modem_ids[] __devinitdata = {
         { 0x1106, 0x3068, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA82XX_MODEM, },
         { 0, }
 };
diff --git a/sound/pci/vx222/vx222.c b/sound/pci/vx222/vx222.c
index c816ddf1b215..0f1ebb010a5e 100644
--- a/sound/pci/vx222/vx222.c
+++ b/sound/pci/vx222/vx222.c
@@ -60,7 +60,7 @@ enum {
         VX_PCI_VX222_NEW
 };
 
-static struct pci_device_id snd_vx222_ids[] = {
+static struct pci_device_id snd_vx222_ids[] __devinitdata = {
         { 0x10b5, 0x9050, 0x1369, PCI_ANY_ID, 0, 0, VX_PCI_VX222_OLD, },   /* PLX */
         { 0x10b5, 0x9030, 0x1369, PCI_ANY_ID, 0, 0, VX_PCI_VX222_NEW, },   /* PLX */
         { 0, }
diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c
index db57ce939fa8..65ebf5f1933a 100644
--- a/sound/pci/ymfpci/ymfpci.c
+++ b/sound/pci/ymfpci/ymfpci.c
@@ -70,7 +70,7 @@ MODULE_PARM_DESC(rear_switch, "Enable shared rear/line-in switch");
 module_param_array(rear_swap, bool, NULL, 0444);
 MODULE_PARM_DESC(rear_swap, "Swap rear channels (must be enabled for correct IEC958 (S/PDIF)) output");
 
-static struct pci_device_id snd_ymfpci_ids[] = {
+static struct pci_device_id snd_ymfpci_ids[] __devinitdata = {
         { 0x1073, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF724 */
         { 0x1073, 0x000d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF724F */
         { 0x1073, 0x000a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF740 */
diff --git a/sound/pcmcia/Kconfig b/sound/pcmcia/Kconfig
index 5d1b0b762efa..c9fa1a2bc58b 100644
--- a/sound/pcmcia/Kconfig
+++ b/sound/pcmcia/Kconfig
@@ -5,7 +5,7 @@ menu "PCMCIA devices"
 
 config SND_VXPOCKET
         tristate "Digigram VXpocket"
-        depends on SND && PCMCIA && ISA
+        depends on SND && PCMCIA
         select SND_VX_LIB
         help
           Say Y here to include support for Digigram VXpocket and
@@ -16,7 +16,7 @@ config SND_VXPOCKET
 
 config SND_PDAUDIOCF
         tristate "Sound Core PDAudioCF"
-        depends on SND && PCMCIA && ISA
+        depends on SND && PCMCIA
         select SND_PCM
         help
           Say Y here to include support for Sound Core PDAudioCF
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index 0992a0923f1a..9351846d7a9d 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -1531,6 +1531,15 @@ YAMAHA_DEVICE(0x7010, "UB99"),
         }
 },
 {
+        USB_DEVICE_VENDOR_SPEC(0x0ccd, 0x0014),
+        .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+                .vendor_name = "TerraTec",
+                .product_name = "PHASE 26",
+                .ifnum = 3,
+                .type = QUIRK_MIDI_STANDARD_INTERFACE
+        }
+},
+{
         USB_DEVICE(0x0ccd, 0x0035),
         .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
                 .vendor_name = "Miditech",