lguest: use native_set_* macros, which properly handle 64-bit entries when PAE is activated

Some cleanups and replace direct assignment with native_set_* macros which properly handle 64-bit entries when PAE is activated

Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

2 files changed, 22 insertions, 21 deletions

diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 514f4d0d2bfa..4f311e40d0aa 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -525,7 +525,7 @@ static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
 static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
                               pte_t *ptep, pte_t pteval)
 {
-        *ptep = pteval;
+        native_set_pte(ptep, pteval);
         lguest_pte_update(mm, addr, ptep);
 }
 
@@ -534,9 +534,9 @@ static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
  * changed. */
 static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
 {
-        *pmdp = pmdval;
+        native_set_pmd(pmdp, pmdval);
         lazy_hcall2(LHCALL_SET_PMD, __pa(pmdp) & PAGE_MASK,
-                   (__pa(pmdp) & (PAGE_SIZE - 1)) / 4);
+                   (__pa(pmdp) & (PAGE_SIZE - 1)) / sizeof(pmd_t));
 }
 
 /* There are a couple of legacy places where the kernel sets a PTE, but we
@@ -550,7 +550,7 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
  * which brings boot back to 0.25 seconds. */
 static void lguest_set_pte(pte_t *ptep, pte_t pteval)
 {
-        *ptep = pteval;
+        native_set_pte(ptep, pteval);
         if (cr3_changed)
                 lazy_hcall1(LHCALL_FLUSH_TLB, 1);
 }
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index 496995370fbc..ffba723cd98d 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -90,7 +90,7 @@ static pte_t *spte_addr(pgd_t spgd, unsigned long vaddr)
         pte_t *page = __va(pgd_pfn(spgd) << PAGE_SHIFT);
         /* You should never call this if the PGD entry wasn't valid */
         BUG_ON(!(pgd_flags(spgd) & _PAGE_PRESENT));
-        return &page[(vaddr >> PAGE_SHIFT) % PTRS_PER_PTE];
+        return &page[pte_index(vaddr)];
 }
 
 /* These two functions just like the above two, except they access the Guest
@@ -105,7 +105,7 @@ static unsigned long gpte_addr(pgd_t gpgd, unsigned long vaddr)
 {
         unsigned long gpage = pgd_pfn(gpgd) << PAGE_SHIFT;
         BUG_ON(!(pgd_flags(gpgd) & _PAGE_PRESENT));
-        return gpage + ((vaddr>>PAGE_SHIFT) % PTRS_PER_PTE) * sizeof(pte_t);
+        return gpage + pte_index(vaddr) * sizeof(pte_t);
 }
 /*:*/
 
@@ -171,7 +171,7 @@ static void release_pte(pte_t pte)
         /* Remember that get_user_pages_fast() took a reference to the page, in
          * get_pfn()?  We have to put it back now. */
         if (pte_flags(pte) & _PAGE_PRESENT)
-                put_page(pfn_to_page(pte_pfn(pte)));
+                put_page(pte_page(pte));
 }
 /*:*/
 
@@ -273,7 +273,7 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
                  * table entry, even if the Guest says it's writable.  That way
                  * we will come back here when a write does actually occur, so
                  * we can update the Guest's _PAGE_DIRTY flag. */
-                *spte = gpte_to_spte(cpu, pte_wrprotect(gpte), 0);
+                native_set_pte(spte, gpte_to_spte(cpu, pte_wrprotect(gpte), 0));
 
         /* Finally, we write the Guest PTE entry back: we've set the
          * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags. */
@@ -323,7 +323,7 @@ void pin_page(struct lg_cpu *cpu, unsigned long vaddr)
 }
 
 /*H:450 If we chase down the release_pgd() code, it looks like this: */
-static void release_pgd(struct lguest *lg, pgd_t *spgd)
+static void release_pgd(pgd_t *spgd)
 {
         /* If the entry's not present, there's nothing to release. */
         if (pgd_flags(*spgd) & _PAGE_PRESENT) {
@@ -350,7 +350,7 @@ static void flush_user_mappings(struct lguest *lg, int idx)
         unsigned int i;
         /* Release every pgd entry up to the kernel's address. */
         for (i = 0; i < pgd_index(lg->kernel_address); i++)
-                release_pgd(lg, lg->pgdirs[idx].pgdir + i);
+                release_pgd(lg->pgdirs[idx].pgdir + i);
 }
 
 /*H:440 (v) Flushing (throwing away) page tables,
@@ -431,7 +431,7 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
 
 /*H:430 (iv) Switching page tables
  *
- * Now we've seen all the page table setting and manipulation, let's see what
+ * Now we've seen all the page table setting and manipulation, let's see
  * what happens when the Guest changes page tables (ie. changes the top-level
  * pgdir).  This occurs on almost every context switch. */
 void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable)
@@ -463,7 +463,7 @@ static void release_all_pagetables(struct lguest *lg)
                 if (lg->pgdirs[i].pgdir)
                         /* Every PGD entry except the Switcher at the top */
                         for (j = 0; j < SWITCHER_PGD_INDEX; j++)
-                                release_pgd(lg, lg->pgdirs[i].pgdir + j);
+                                release_pgd(lg->pgdirs[i].pgdir + j);
 }
 
 /* We also throw away everything when a Guest tells us it's changed a kernel
@@ -581,7 +581,7 @@ void guest_set_pmd(struct lguest *lg, unsigned long gpgdir, u32 idx)
         pgdir = find_pgdir(lg, gpgdir);
         if (pgdir < ARRAY_SIZE(lg->pgdirs))
                 /* ... throw it away. */
-                release_pgd(lg, lg->pgdirs[pgdir].pgdir + idx);
+                release_pgd(lg->pgdirs[pgdir].pgdir + idx);
 }
 
 /* Once we know how much memory we have we can construct simple identity
@@ -726,8 +726,9 @@ void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
          * page is already mapped there, we don't have to copy them out
          * again. */
         pfn = __pa(cpu->regs_page) >> PAGE_SHIFT;
-        regs_pte = pfn_pte(pfn, __pgprot(__PAGE_KERNEL));
-        switcher_pte_page[(unsigned long)pages/PAGE_SIZE%PTRS_PER_PTE] = regs_pte;
+        native_set_pte(&regs_pte, pfn_pte(pfn, PAGE_KERNEL));
+        native_set_pte(&switcher_pte_page[pte_index((unsigned long)pages)],
+                        regs_pte);
 }
 /*:*/
 
@@ -752,21 +753,21 @@ static __init void populate_switcher_pte_page(unsigned int cpu,
 
         /* The first entries are easy: they map the Switcher code. */
         for (i = 0; i < pages; i++) {
-                pte[i] = mk_pte(switcher_page[i],
-                                __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED));
+                native_set_pte(&pte[i], mk_pte(switcher_page[i],
+                                __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED)));
         }
 
         /* The only other thing we map is this CPU's pair of pages. */
         i = pages + cpu*2;
 
         /* First page (Guest registers) is writable from the Guest */
-        pte[i] = pfn_pte(page_to_pfn(switcher_page[i]),
-                         __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_RW));
+        native_set_pte(&pte[i], pfn_pte(page_to_pfn(switcher_page[i]),
+                         __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_RW)));
 
         /* The second page contains the "struct lguest_ro_state", and is
          * read-only. */
-        pte[i+1] = pfn_pte(page_to_pfn(switcher_page[i+1]),
-                           __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED));
+        native_set_pte(&pte[i+1], pfn_pte(page_to_pfn(switcher_page[i+1]),
+                           __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED)));
 }
 
 /* We've made it through the page table code.  Perhaps our tired brains are