Merge master.kernel.org:/home/rmk/linux-2.6-arm

16 files changed, 379 insertions, 24 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3bfef0934c9d..ec77721507cb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -358,7 +358,7 @@ config HOTPLUG_CPU
 
 config LOCAL_TIMERS
         bool "Use local timer interrupts"
-        depends on SMP && n
+        depends on SMP && REALVIEW_MPCORE
         default y
         help
           Enable support for local timers on SMP platforms, rather then the
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index c0f6a119de3b..30494aab829a 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -359,7 +359,7 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long stack_start,
         struct thread_info *thread = p->thread_info;
         struct pt_regs *childregs;
 
-        childregs = ((struct pt_regs *)((unsigned long)thread + THREAD_START_SP)) - 1;
+        childregs = (void *)thread + THREAD_START_SP - sizeof(*regs);
         *childregs = *regs;
         childregs->ARM_r0 = 0;
         childregs->ARM_sp = stack_start;
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index f35d91fbe117..b8c14e936697 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -34,7 +34,7 @@
         and     r2, r0, #7
         mov     r3, #1
         mov     r3, r3, lsl r2
-        save_and_disable_irqs ip, r2
+        save_and_disable_irqs ip
         ldrb    r2, [r1, r0, lsr #3]
         \instr  r2, r2, r3
         strb    r2, [r1, r0, lsr #3]
@@ -54,7 +54,7 @@
         add     r1, r1, r0, lsr #3
         and     r3, r0, #7
         mov     r0, #1
-        save_and_disable_irqs ip, r2
+        save_and_disable_irqs ip
         ldrb    r2, [r1]
         tst     r2, r0, lsl r3
         \instr  r2, r2, r0, lsl r3
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index 011a85c10627..36e76ba937fc 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -5,3 +5,5 @@
 obj-y                                   := core.o clock.o
 obj-$(CONFIG_MACH_REALVIEW_EB)          += realview_eb.o
 obj-$(CONFIG_SMP)                       += platsmp.o headsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
+obj-$(CONFIG_LOCAL_TIMERS)              += localtimer.o
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 4ea60d8b6e36..e2c6fa23d3cd 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -550,7 +550,7 @@ static irqreturn_t realview_timer_interrupt(int irq, void *dev_id, struct pt_reg
 
         timer_tick(regs);
 
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && !defined(CONFIG_LOCAL_TIMERS)
         smp_send_timer();
         update_process_times(user_mode(regs));
 #endif
diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
new file mode 100644
index 000000000000..09748cbcd10e
--- /dev/null
+++ b/arch/arm/mach-realview/hotplug.c
@@ -0,0 +1,138 @@
+/*
+ *  linux/arch/arm/mach-realview/hotplug.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <linux/completion.h>
+
+extern volatile int pen_release;
+
+static DECLARE_COMPLETION(cpu_killed);
+
+static inline void cpu_enter_lowpower(void)
+{
+        unsigned int v;
+
+        asm volatile(   "mcr    p15, 0, %1, c7, c14, 0\n"
+        "       mcr     p15, 0, %1, c7, c5, 0\n"
+        "       mcr     p15, 0, %1, c7, c10, 4\n"
+        /*
+         * Turn off coherency
+         */
+        "       mrc     p15, 0, %0, c1, c0, 1\n"
+        "       bic     %0, %0, #0x20\n"
+        "       mcr     p15, 0, %0, c1, c0, 1\n"
+        "       mrc     p15, 0, %0, c1, c0, 0\n"
+        "       bic     %0, %0, #0x04\n"
+        "       mcr     p15, 0, %0, c1, c0, 0\n"
+          : "=&r" (v)
+          : "r" (0)
+          : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+        unsigned int v;
+
+        asm volatile(   "mrc    p15, 0, %0, c1, c0, 0\n"
+        "       orr     %0, %0, #0x04\n"
+        "       mcr     p15, 0, %0, c1, c0, 0\n"
+        "       mrc     p15, 0, %0, c1, c0, 1\n"
+        "       orr     %0, %0, #0x20\n"
+        "       mcr     p15, 0, %0, c1, c0, 1\n"
+          : "=&r" (v)
+          :
+          : "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu)
+{
+        /*
+         * there is no power-control hardware on this platform, so all
+         * we can do is put the core into WFI; this is safe as the calling
+         * code will have already disabled interrupts
+         */
+        for (;;) {
+                /*
+                 * here's the WFI
+                 */
+                asm(".word      0xe320f003\n"
+                    :
+                    :
+                    : "memory", "cc");
+
+                if (pen_release == cpu) {
+                        /*
+                         * OK, proper wakeup, we're done
+                         */
+                        break;
+                }
+
+                /*
+                 * getting here, means that we have come out of WFI without
+                 * having been woken up - this shouldn't happen
+                 *
+                 * The trouble is, letting people know about this is not really
+                 * possible, since we are currently running incoherently, and
+                 * therefore cannot safely call printk() or anything else
+                 */
+#ifdef DEBUG
+                printk("CPU%u: spurious wakeup call\n", cpu);
+#endif
+        }
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+        return wait_for_completion_timeout(&cpu_killed, 5000);
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+#ifdef DEBUG
+        unsigned int this_cpu = hard_smp_processor_id();
+
+        if (cpu != this_cpu) {
+                printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
+                           this_cpu, cpu);
+                BUG();
+        }
+#endif
+
+        printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
+        complete(&cpu_killed);
+
+        /*
+         * we're ready for shutdown now, so do it
+         */
+        cpu_enter_lowpower();
+        platform_do_lowpower(cpu);
+
+        /*
+         * bring this CPU back into the world of cache
+         * coherency, and then restore interrupts
+         */
+        cpu_leave_lowpower();
+}
+
+int mach_cpu_disable(unsigned int cpu)
+{
+        /*
+         * we don't allow CPU 0 to be shutdown (it is still too special
+         * e.g. clock tick interrupts)
+         */
+        return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
new file mode 100644
index 000000000000..5e917e37d095
--- /dev/null
+++ b/arch/arm/mach-realview/localtimer.c
@@ -0,0 +1,130 @@
+/*
+ *  linux/arch/arm/mach-realview/localtimer.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+
+#include <asm/mach/time.h>
+#include <asm/hardware/arm_twd.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "core.h"
+
+#define TWD_BASE(cpu)   (__io_address(REALVIEW_TWD_BASE) + \
+                         ((cpu) * REALVIEW_TWD_SIZE))
+
+static unsigned long mpcore_timer_rate;
+
+/*
+ * local_timer_ack: checks for a local timer interrupt.
+ *
+ * If a local timer interrupt has occured, acknowledge and return 1.
+ * Otherwise, return 0.
+ */
+int local_timer_ack(void)
+{
+        void __iomem *base = TWD_BASE(smp_processor_id());
+
+        if (__raw_readl(base + TWD_TIMER_INTSTAT)) {
+                __raw_writel(1, base + TWD_TIMER_INTSTAT);
+                return 1;
+        }
+
+        return 0;
+}
+
+void __cpuinit local_timer_setup(unsigned int cpu)
+{
+        void __iomem *base = TWD_BASE(cpu);
+        unsigned int load, offset;
+        u64 waitjiffies;
+        unsigned int count;
+
+        /*
+         * If this is the first time round, we need to work out how fast
+         * the timer ticks
+         */
+        if (mpcore_timer_rate == 0) {
+                printk("Calibrating local timer... ");
+
+                /* Wait for a tick to start */
+                waitjiffies = get_jiffies_64() + 1;
+
+                while (get_jiffies_64() < waitjiffies)
+                        udelay(10);
+
+                /* OK, now the tick has started, let's get the timer going */
+                waitjiffies += 5;
+
+                                 /* enable, no interrupt or reload */
+                __raw_writel(0x1, base + TWD_TIMER_CONTROL);
+
+                                 /* maximum value */
+                __raw_writel(0xFFFFFFFFU, base + TWD_TIMER_COUNTER);
+
+                while (get_jiffies_64() < waitjiffies)
+                        udelay(10);
+
+                count = __raw_readl(base + TWD_TIMER_COUNTER);
+
+                mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
+
+                printk("%lu.%02luMHz.\n", mpcore_timer_rate / 1000000,
+                        (mpcore_timer_rate / 100000) % 100);
+        }
+
+        load = mpcore_timer_rate / HZ;
+
+        __raw_writel(load, base + TWD_TIMER_LOAD);
+        __raw_writel(0x7,  base + TWD_TIMER_CONTROL);
+
+        /*
+         * Now maneuver our local tick into the right part of the jiffy.
+         * Start by working out where within the tick our local timer
+         * interrupt should go.
+         */
+        offset = ((mpcore_timer_rate / HZ) / (NR_CPUS + 1)) * (cpu + 1);
+
+        /*
+         * gettimeoffset() will return a number of us since the last tick.
+         * Convert this number of us to a local timer tick count.
+         * Be careful of integer overflow whilst keeping maximum precision.
+         *
+         * with HZ=100 and 1MHz (fpga) ~ 1GHz processor:
+         * load = 1 ~ 10,000
+         * mpcore_timer_rate/10000 = 100 ~ 100,000
+         *
+         * so the multiply value will be less than 10^9 always.
+         */
+        load = (system_timer->offset() * (mpcore_timer_rate / 10000)) / 100;
+
+        /* Add on our offset to get the load value */
+        load = (load + offset) % (mpcore_timer_rate / HZ);
+
+        __raw_writel(load, base + TWD_TIMER_COUNTER);
+
+        /* Make sure our local interrupt controller has this enabled */
+        __raw_writel(1 << IRQ_LOCALTIMER,
+                     __io_address(REALVIEW_GIC_DIST_BASE) + GIC_DIST_ENABLE_SET);
+}
+
+/*
+ * take a local timer down
+ */
+void __cpuexit local_timer_stop(unsigned int cpu)
+{
+        __raw_writel(0, TWD_BASE(cpu) + TWD_TIMER_CONTROL);
+}
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 09b35f62247a..0c7d4ac9a7b3 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -175,6 +175,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
                 max_cpus = ncores;
 
         /*
+         * Enable the local timer for primary CPU
+         */
+        local_timer_setup(cpu);
+
+        /*
          * Initialise the possible/present maps.
          * cpu_possible_map describes the set of CPUs which may be present
          * cpu_present_map describes the set of CPUs populated
diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c
index 8390b685c2b6..0f81fc0c2f7f 100644
--- a/arch/arm/mach-s3c2410/mach-anubis.c
+++ b/arch/arm/mach-s3c2410/mach-anubis.c
@@ -56,8 +56,16 @@
 static struct map_desc anubis_iodesc[] __initdata = {
   /* ISA IO areas */
 
-  { (u32)S3C24XX_VA_ISA_BYTE, 0x0,         SZ_16M, MT_DEVICE },
-  { (u32)S3C24XX_VA_ISA_WORD, 0x0,         SZ_16M, MT_DEVICE },
+  {
+        .virtual        = (u32)S3C24XX_VA_ISA_BYTE,
+        .pfn            = __phys_to_pfn(0x0),
+        .length         = SZ_4M,
+        .type           = MT_DEVICE
+  }, {
+        .virtual        = (u32)S3C24XX_VA_ISA_WORD,
+        .pfn            = __phys_to_pfn(0x0),
+        .length         = SZ_4M, MT_DEVICE
+  },
 
   /* we could possibly compress the next set down into a set of smaller tables
    * pagetables, but that would mean using an L2 section, and it still means
@@ -66,16 +74,41 @@ static struct map_desc anubis_iodesc[] __initdata = {
 
   /* CPLD control registers */
 
-  { (u32)ANUBIS_VA_CTRL1,       ANUBIS_PA_CTRL1,        SZ_4K, MT_DEVICE },
-  { (u32)ANUBIS_VA_CTRL2,       ANUBIS_PA_CTRL2,        SZ_4K, MT_DEVICE },
+  {
+        .virtual        = (u32)ANUBIS_VA_CTRL1,
+        .pfn            = __phys_to_pfn(ANUBIS_PA_CTRL1),
+        .length         = SZ_4K,
+        .type           = MT_DEVICE
+  }, {
+        .virtual        = (u32)ANUBIS_VA_CTRL2,
+        .pfn            = __phys_to_pfn(ANUBIS_PA_CTRL2),
+        .length         = SZ_4K,
+        .type           =MT_DEVICE
+  },
 
   /* IDE drives */
 
-  { (u32)ANUBIS_IDEPRI,         S3C2410_CS3,            SZ_1M, MT_DEVICE },
-  { (u32)ANUBIS_IDEPRIAUX,      S3C2410_CS3+(1<<26),    SZ_1M, MT_DEVICE },
-
-  { (u32)ANUBIS_IDESEC,         S3C2410_CS4,            SZ_1M, MT_DEVICE },
-  { (u32)ANUBIS_IDESECAUX,      S3C2410_CS4+(1<<26),    SZ_1M, MT_DEVICE },
+  {
+        .virtual        = (u32)ANUBIS_IDEPRI,
+        .pfn            = __phys_to_pfn(S3C2410_CS3),
+        .length         = SZ_1M,
+        .type           = MT_DEVICE
+  }, {
+        .virtual        = (u32)ANUBIS_IDEPRIAUX,
+        .pfn            = __phys_to_pfn(S3C2410_CS3+(1<<26)),
+        .length         = SZ_1M,
+        .type           = MT_DEVICE
+  }, {
+        .virtual        = (u32)ANUBIS_IDESEC,
+        .pfn            = __phys_to_pfn(S3C2410_CS4),
+        .length         = SZ_1M,
+        .type           = MT_DEVICE
+  }, {
+        .virtual        = (u32)ANUBIS_IDESECAUX,
+        .pfn            = __phys_to_pfn(S3C2410_CS4+(1<<26)),
+        .length         = SZ_1M,
+        .type           = MT_DEVICE
+  },
 };
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c
index 24d69019a843..f8d86d1e16b6 100644
--- a/arch/arm/mach-s3c2410/mach-rx3715.c
+++ b/arch/arm/mach-s3c2410/mach-rx3715.c
@@ -56,8 +56,17 @@
 static struct map_desc rx3715_iodesc[] __initdata = {
         /* dump ISA space somewhere unused */
 
-        { (u32)S3C24XX_VA_ISA_WORD, S3C2410_CS3, SZ_16M, MT_DEVICE },
-        { (u32)S3C24XX_VA_ISA_BYTE, S3C2410_CS3, SZ_16M, MT_DEVICE },
+        {
+                .virtual        = (u32)S3C24XX_VA_ISA_WORD,
+                .pfn            = __phys_to_pfn(S3C2410_CS3),
+                .length         = SZ_1M,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (u32)S3C24XX_VA_ISA_BYTE,
+                .pfn            = __phys_to_pfn(S3C2410_CS3),
+                .length         = SZ_1M,
+                .type           = MT_DEVICE,
+        },
 };
 
 
diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c
index d666c621ad06..4e31118533e6 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2440.c
@@ -58,8 +58,27 @@
 static struct map_desc smdk2440_iodesc[] __initdata = {
         /* ISA IO Space map (memory space selected by A24) */
 
-        { (u32)S3C24XX_VA_ISA_WORD, S3C2410_CS2, SZ_16M, MT_DEVICE },
-        { (u32)S3C24XX_VA_ISA_BYTE, S3C2410_CS2, SZ_16M, MT_DEVICE },
+        {
+                .virtual        = (u32)S3C24XX_VA_ISA_WORD,
+                .pfn            = __phys_to_pfn(S3C2410_CS2),
+                .length         = 0x10000,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+                .pfn            = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+                .length         = SZ_4M,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (u32)S3C24XX_VA_ISA_BYTE,
+                .pfn            = __phys_to_pfn(S3C2410_CS2),
+                .length         = 0x10000,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+                .pfn            = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+                .length         = SZ_4M,
+                .type           = MT_DEVICE,
+        }
 };
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
diff --git a/include/asm-arm/arch-realview/entry-macro.S b/include/asm-arm/arch-realview/entry-macro.S
index 4df469bf42e2..6288fad0dc41 100644
--- a/include/asm-arm/arch-realview/entry-macro.S
+++ b/include/asm-arm/arch-realview/entry-macro.S
@@ -61,3 +61,14 @@
                 strcc   \irqstat, [\base, #GIC_CPU_EOI]
                 cmpcs   \irqnr, \irqnr
                 .endm
+
+                /* As above, this assumes that irqstat and base are preserved.. */
+
+                .macro test_for_ltirq, irqnr, irqstat, base, tmp
+                bic     \irqnr, \irqstat, #0x1c00
+                mov     \tmp, #0
+                cmp     \irqnr, #29
+                moveq   \tmp, #1
+                streq   \irqstat, [\base, #GIC_CPU_EOI]
+                cmp     \tmp, #0
+                .endm
diff --git a/include/asm-arm/arch-realview/irqs.h b/include/asm-arm/arch-realview/irqs.h
index ff376494e5b1..c16223c9588d 100644
--- a/include/asm-arm/arch-realview/irqs.h
+++ b/include/asm-arm/arch-realview/irqs.h
@@ -21,6 +21,9 @@
 
 #include <asm/arch/platform.h>
 
+#define IRQ_LOCALTIMER                  29
+#define IRQ_LOCALWDOG                   30
+
 /* 
  *  IRQ interrupts definitions are the same the INT definitions
  *  held within platform.h
diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h
index aef9b36b3c37..18d7c18b738c 100644
--- a/include/asm-arm/arch-realview/platform.h
+++ b/include/asm-arm/arch-realview/platform.h
@@ -209,6 +209,8 @@
 #else
 #define REALVIEW_MPCORE_SCU_BASE        0x10100000      /*  SCU registers */
 #define REALVIEW_GIC_CPU_BASE           0x10100100      /* Generic interrupt controller CPU interface */
+#define REALVIEW_TWD_BASE               0x10100700
+#define REALVIEW_TWD_SIZE               0x00000100
 #define REALVIEW_GIC_DIST_BASE          0x10101000      /* Generic interrupt controller distributor */
 #endif
 #define REALVIEW_SMC_BASE             0x10080000        /* SMC */
@@ -305,9 +307,6 @@
 #define INT_TSPENINT                    30      /* Touchscreen pen */
 #define INT_TSKPADINT                   31      /* Touchscreen keypad */
 #else
-#define INT_LOCALTIMER                  29
-#define INT_LOCALWDOG                   30
-
 #define INT_AACI                        0
 #define INT_TIMERINT0_1                 1
 #define INT_TIMERINT2_3                 2
diff --git a/include/asm-arm/assembler.h b/include/asm-arm/assembler.h
index 69a28f96bee2..f31ac92b6c7f 100644
--- a/include/asm-arm/assembler.h
+++ b/include/asm-arm/assembler.h
@@ -83,10 +83,13 @@
  * Save the current IRQ state and disable IRQs.  Note that this macro
  * assumes FIQs are enabled, and that the processor is in SVC mode.
  */
-        .macro  save_and_disable_irqs, oldcpsr, temp
+        .macro  save_and_disable_irqs, oldcpsr
         mrs     \oldcpsr, cpsr
-        mov     \temp, #PSR_I_BIT | MODE_SVC
-        msr     cpsr_c, \temp
+#if __LINUX_ARM_ARCH__ >= 6
+        cpsid   i
+#else
+        msr     cpsr_c, #PSR_I_BIT | MODE_SVC
+#endif
         .endm
 
 /*
diff --git a/include/asm-arm/mach/flash.h b/include/asm-arm/mach/flash.h
index cd57436d9874..05b029ef6371 100644
--- a/include/asm-arm/mach/flash.h
+++ b/include/asm-arm/mach/flash.h
@@ -11,6 +11,7 @@
 #define ASMARM_MACH_FLASH_H
 
 struct mtd_partition;
+struct mtd_info;
 
 /*
  * map_name:    the map probe function name
@@ -19,6 +20,7 @@ struct mtd_partition;
  * init:        method called at driver/device initialisation
  * exit:        method called at driver/device removal
  * set_vpp:     method called to enable or disable VPP
+ * mmcontrol:   method called to enable or disable Sync. Burst Read in OneNAND
  * parts:       optional array of mtd_partitions for static partitioning
  * nr_parts:    number of mtd_partitions for static partitoning
  */
@@ -29,6 +31,7 @@ struct flash_platform_data {
         int             (*init)(void);
         void            (*exit)(void);
         void            (*set_vpp)(int on);
+        void            (*mmcontrol)(struct mtd_info *mtd, int sync_read);
         struct mtd_partition *parts;
         unsigned int    nr_parts;
 };