[PATCH] pi-futex: rt mutex docs

Add rt-mutex documentation.

[rostedt@goodmis.org: Update rt-mutex-design.txt as per Randy Dunlap suggestions]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

3 files changed, 981 insertions, 0 deletions

diff --git a/Documentation/pi-futex.txt b/Documentation/pi-futex.txt
new file mode 100644
index 000000000000..5d61dacd21f6
--- /dev/null
+++ b/Documentation/pi-futex.txt
@@ -0,0 +1,121 @@
+Lightweight PI-futexes
+----------------------
+
+We are calling them lightweight for 3 reasons:
+
+ - in the user-space fastpath a PI-enabled futex involves no kernel work
+   (or any other PI complexity) at all. No registration, no extra kernel
+   calls - just pure fast atomic ops in userspace.
+
+ - even in the slowpath, the system call and scheduling pattern is very
+   similar to normal futexes.
+
+ - the in-kernel PI implementation is streamlined around the mutex
+   abstraction, with strict rules that keep the implementation
+   relatively simple: only a single owner may own a lock (i.e. no
+   read-write lock support), only the owner may unlock a lock, no
+   recursive locking, etc.
+
+Priority Inheritance - why?
+---------------------------
+
+The short reply: user-space PI helps achieving/improving determinism for
+user-space applications. In the best-case, it can help achieve
+determinism and well-bound latencies. Even in the worst-case, PI will
+improve the statistical distribution of locking related application
+delays.
+
+The longer reply:
+-----------------
+
+Firstly, sharing locks between multiple tasks is a common programming
+technique that often cannot be replaced with lockless algorithms. As we
+can see it in the kernel [which is a quite complex program in itself],
+lockless structures are rather the exception than the norm - the current
+ratio of lockless vs. locky code for shared data structures is somewhere
+between 1:10 and 1:100. Lockless is hard, and the complexity of lockless
+algorithms often endangers to ability to do robust reviews of said code.
+I.e. critical RT apps often choose lock structures to protect critical
+data structures, instead of lockless algorithms. Furthermore, there are
+cases (like shared hardware, or other resource limits) where lockless
+access is mathematically impossible.
+
+Media players (such as Jack) are an example of reasonable application
+design with multiple tasks (with multiple priority levels) sharing
+short-held locks: for example, a highprio audio playback thread is
+combined with medium-prio construct-audio-data threads and low-prio
+display-colory-stuff threads. Add video and decoding to the mix and
+we've got even more priority levels.
+
+So once we accept that synchronization objects (locks) are an
+unavoidable fact of life, and once we accept that multi-task userspace
+apps have a very fair expectation of being able to use locks, we've got
+to think about how to offer the option of a deterministic locking
+implementation to user-space.
+
+Most of the technical counter-arguments against doing priority
+inheritance only apply to kernel-space locks. But user-space locks are
+different, there we cannot disable interrupts or make the task
+non-preemptible in a critical section, so the 'use spinlocks' argument
+does not apply (user-space spinlocks have the same priority inversion
+problems as other user-space locking constructs). Fact is, pretty much
+the only technique that currently enables good determinism for userspace
+locks (such as futex-based pthread mutexes) is priority inheritance:
+
+Currently (without PI), if a high-prio and a low-prio task shares a lock
+[this is a quite common scenario for most non-trivial RT applications],
+even if all critical sections are coded carefully to be deterministic
+(i.e. all critical sections are short in duration and only execute a
+limited number of instructions), the kernel cannot guarantee any
+deterministic execution of the high-prio task: any medium-priority task
+could preempt the low-prio task while it holds the shared lock and
+executes the critical section, and could delay it indefinitely.
+
+Implementation:
+---------------
+
+As mentioned before, the userspace fastpath of PI-enabled pthread
+mutexes involves no kernel work at all - they behave quite similarly to
+normal futex-based locks: a 0 value means unlocked, and a value==TID
+means locked. (This is the same method as used by list-based robust
+futexes.) Userspace uses atomic ops to lock/unlock these mutexes without
+entering the kernel.
+
+To handle the slowpath, we have added two new futex ops:
+
+  FUTEX_LOCK_PI
+  FUTEX_UNLOCK_PI
+
+If the lock-acquire fastpath fails, [i.e. an atomic transition from 0 to
+TID fails], then FUTEX_LOCK_PI is called. The kernel does all the
+remaining work: if there is no futex-queue attached to the futex address
+yet then the code looks up the task that owns the futex [it has put its
+own TID into the futex value], and attaches a 'PI state' structure to
+the futex-queue. The pi_state includes an rt-mutex, which is a PI-aware,
+kernel-based synchronization object. The 'other' task is made the owner
+of the rt-mutex, and the FUTEX_WAITERS bit is atomically set in the
+futex value. Then this task tries to lock the rt-mutex, on which it
+blocks. Once it returns, it has the mutex acquired, and it sets the
+futex value to its own TID and returns. Userspace has no other work to
+perform - it now owns the lock, and futex value contains
+FUTEX_WAITERS|TID.
+
+If the unlock side fastpath succeeds, [i.e. userspace manages to do a
+TID -> 0 atomic transition of the futex value], then no kernel work is
+triggered.
+
+If the unlock fastpath fails (because the FUTEX_WAITERS bit is set),
+then FUTEX_UNLOCK_PI is called, and the kernel unlocks the futex on the
+behalf of userspace - and it also unlocks the attached
+pi_state->rt_mutex and thus wakes up any potential waiters.
+
+Note that under this approach, contrary to previous PI-futex approaches,
+there is no prior 'registration' of a PI-futex. [which is not quite
+possible anyway, due to existing ABI properties of pthread mutexes.]
+
+Also, under this scheme, 'robustness' and 'PI' are two orthogonal
+properties of futexes, and all four combinations are possible: futex,
+robust-futex, PI-futex, robust+PI-futex.
+
+More details about priority inheritance can be found in
+Documentation/rtmutex.txt.
diff --git a/Documentation/rt-mutex-design.txt b/Documentation/rt-mutex-design.txt
new file mode 100644
index 000000000000..c472ffacc2f6
--- /dev/null
+++ b/Documentation/rt-mutex-design.txt
@@ -0,0 +1,781 @@
+#
+# Copyright (c) 2006 Steven Rostedt
+# Licensed under the GNU Free Documentation License, Version 1.2
+#
+
+RT-mutex implementation design
+------------------------------
+
+This document tries to describe the design of the rtmutex.c implementation.
+It doesn't describe the reasons why rtmutex.c exists. For that please see
+Documentation/rt-mutex.txt.  Although this document does explain problems
+that happen without this code, but that is in the concept to understand
+what the code actually is doing.
+
+The goal of this document is to help others understand the priority
+inheritance (PI) algorithm that is used, as well as reasons for the
+decisions that were made to implement PI in the manner that was done.
+
+
+Unbounded Priority Inversion
+----------------------------
+
+Priority inversion is when a lower priority process executes while a higher
+priority process wants to run.  This happens for several reasons, and
+most of the time it can't be helped.  Anytime a high priority process wants
+to use a resource that a lower priority process has (a mutex for example),
+the high priority process must wait until the lower priority process is done
+with the resource.  This is a priority inversion.  What we want to prevent
+is something called unbounded priority inversion.  That is when the high
+priority process is prevented from running by a lower priority process for
+an undetermined amount of time.
+
+The classic example of unbounded priority inversion is were you have three
+processes, let's call them processes A, B, and C, where A is the highest
+priority process, C is the lowest, and B is in between. A tries to grab a lock
+that C owns and must wait and lets C run to release the lock. But in the
+meantime, B executes, and since B is of a higher priority than C, it preempts C,
+but by doing so, it is in fact preempting A which is a higher priority process.
+Now there's no way of knowing how long A will be sleeping waiting for C
+to release the lock, because for all we know, B is a CPU hog and will
+never give C a chance to release the lock.  This is called unbounded priority
+inversion.
+
+Here's a little ASCII art to show the problem.
+
+   grab lock L1 (owned by C)
+     |
+A ---+
+        C preempted by B
+          |
+C    +----+
+
+B         +-------->
+                B now keeps A from running.
+
+
+Priority Inheritance (PI)
+-------------------------
+
+There are several ways to solve this issue, but other ways are out of scope
+for this document.  Here we only discuss PI.
+
+PI is where a process inherits the priority of another process if the other
+process blocks on a lock owned by the current process.  To make this easier
+to understand, let's use the previous example, with processes A, B, and C again.
+
+This time, when A blocks on the lock owned by C, C would inherit the priority
+of A.  So now if B becomes runnable, it would not preempt C, since C now has
+the high priority of A.  As soon as C releases the lock, it loses its
+inherited priority, and A then can continue with the resource that C had.
+
+Terminology
+-----------
+
+Here I explain some terminology that is used in this document to help describe
+the design that is used to implement PI.
+
+PI chain - The PI chain is an ordered series of locks and processes that cause
+           processes to inherit priorities from a previous process that is
+           blocked on one of its locks.  This is described in more detail
+           later in this document.
+
+mutex    - In this document, to differentiate from locks that implement
+           PI and spin locks that are used in the PI code, from now on
+           the PI locks will be called a mutex.
+
+lock     - In this document from now on, I will use the term lock when
+           referring to spin locks that are used to protect parts of the PI
+           algorithm.  These locks disable preemption for UP (when
+           CONFIG_PREEMPT is enabled) and on SMP prevents multiple CPUs from
+           entering critical sections simultaneously.
+
+spin lock - Same as lock above.
+
+waiter   - A waiter is a struct that is stored on the stack of a blocked
+           process.  Since the scope of the waiter is within the code for
+           a process being blocked on the mutex, it is fine to allocate
+           the waiter on the process's stack (local variable).  This
+           structure holds a pointer to the task, as well as the mutex that
+           the task is blocked on.  It also has the plist node structures to
+           place the task in the waiter_list of a mutex as well as the
+           pi_list of a mutex owner task (described below).
+
+           waiter is sometimes used in reference to the task that is waiting
+           on a mutex. This is the same as waiter->task.
+
+waiters  - A list of processes that are blocked on a mutex.
+
+top waiter - The highest priority process waiting on a specific mutex.
+
+top pi waiter - The highest priority process waiting on one of the mutexes
+                that a specific process owns.
+
+Note:  task and process are used interchangeably in this document, mostly to
+       differentiate between two processes that are being described together.
+
+
+PI chain
+--------
+
+The PI chain is a list of processes and mutexes that may cause priority
+inheritance to take place.  Multiple chains may converge, but a chain
+would never diverge, since a process can't be blocked on more than one
+mutex at a time.
+
+Example:
+
+   Process:  A, B, C, D, E
+   Mutexes:  L1, L2, L3, L4
+
+   A owns: L1
+           B blocked on L1
+           B owns L2
+                  C blocked on L2
+                  C owns L3
+                         D blocked on L3
+                         D owns L4
+                                E blocked on L4
+
+The chain would be:
+
+   E->L4->D->L3->C->L2->B->L1->A
+
+To show where two chains merge, we could add another process F and
+another mutex L5 where B owns L5 and F is blocked on mutex L5.
+
+The chain for F would be:
+
+   F->L5->B->L1->A
+
+Since a process may own more than one mutex, but never be blocked on more than
+one, the chains merge.
+
+Here we show both chains:
+
+   E->L4->D->L3->C->L2-+
+                       |
+                       +->B->L1->A
+                       |
+                 F->L5-+
+
+For PI to work, the processes at the right end of these chains (or we may
+also call it the Top of the chain) must be equal to or higher in priority
+than the processes to the left or below in the chain.
+
+Also since a mutex may have more than one process blocked on it, we can
+have multiple chains merge at mutexes.  If we add another process G that is
+blocked on mutex L2:
+
+  G->L2->B->L1->A
+
+And once again, to show how this can grow I will show the merging chains
+again.
+
+   E->L4->D->L3->C-+
+                   +->L2-+
+                   |     |
+                 G-+     +->B->L1->A
+                         |
+                   F->L5-+
+
+
+Plist
+-----
+
+Before I go further and talk about how the PI chain is stored through lists
+on both mutexes and processes, I'll explain the plist.  This is similar to
+the struct list_head functionality that is already in the kernel.
+The implementation of plist is out of scope for this document, but it is
+very important to understand what it does.
+
+There are a few differences between plist and list, the most important one
+being that plist is a priority sorted linked list.  This means that the
+priorities of the plist are sorted, such that it takes O(1) to retrieve the
+highest priority item in the list.  Obviously this is useful to store processes
+based on their priorities.
+
+Another difference, which is important for implementation, is that, unlike
+list, the head of the list is a different element than the nodes of a list.
+So the head of the list is declared as struct plist_head and nodes that will
+be added to the list are declared as struct plist_node.
+
+
+Mutex Waiter List
+-----------------
+
+Every mutex keeps track of all the waiters that are blocked on itself. The mutex
+has a plist to store these waiters by priority.  This list is protected by
+a spin lock that is located in the struct of the mutex. This lock is called
+wait_lock.  Since the modification of the waiter list is never done in
+interrupt context, the wait_lock can be taken without disabling interrupts.
+
+
+Task PI List
+------------
+
+To keep track of the PI chains, each process has its own PI list.  This is
+a list of all top waiters of the mutexes that are owned by the process.
+Note that this list only holds the top waiters and not all waiters that are
+blocked on mutexes owned by the process.
+
+The top of the task's PI list is always the highest priority task that
+is waiting on a mutex that is owned by the task.  So if the task has
+inherited a priority, it will always be the priority of the task that is
+at the top of this list.
+
+This list is stored in the task structure of a process as a plist called
+pi_list.  This list is protected by a spin lock also in the task structure,
+called pi_lock.  This lock may also be taken in interrupt context, so when
+locking the pi_lock, interrupts must be disabled.
+
+
+Depth of the PI Chain
+---------------------
+
+The maximum depth of the PI chain is not dynamic, and could actually be
+defined.  But is very complex to figure it out, since it depends on all
+the nesting of mutexes.  Let's look at the example where we have 3 mutexes,
+L1, L2, and L3, and four separate functions func1, func2, func3 and func4.
+The following shows a locking order of L1->L2->L3, but may not actually
+be directly nested that way.
+
+void func1(void)
+{
+        mutex_lock(L1);
+
+        /* do anything */
+
+        mutex_unlock(L1);
+}
+
+void func2(void)
+{
+        mutex_lock(L1);
+        mutex_lock(L2);
+
+        /* do something */
+
+        mutex_unlock(L2);
+        mutex_unlock(L1);
+}
+
+void func3(void)
+{
+        mutex_lock(L2);
+        mutex_lock(L3);
+
+        /* do something else */
+
+        mutex_unlock(L3);
+        mutex_unlock(L2);
+}
+
+void func4(void)
+{
+        mutex_lock(L3);
+
+        /* do something again */
+
+        mutex_unlock(L3);
+}
+
+Now we add 4 processes that run each of these functions separately.
+Processes A, B, C, and D which run functions func1, func2, func3 and func4
+respectively, and such that D runs first and A last.  With D being preempted
+in func4 in the "do something again" area, we have a locking that follows:
+
+D owns L3
+       C blocked on L3
+       C owns L2
+              B blocked on L2
+              B owns L1
+                     A blocked on L1
+
+And thus we have the chain A->L1->B->L2->C->L3->D.
+
+This gives us a PI depth of 4 (four processes), but looking at any of the
+functions individually, it seems as though they only have at most a locking
+depth of two.  So, although the locking depth is defined at compile time,
+it still is very difficult to find the possibilities of that depth.
+
+Now since mutexes can be defined by user-land applications, we don't want a DOS
+type of application that nests large amounts of mutexes to create a large
+PI chain, and have the code holding spin locks while looking at a large
+amount of data.  So to prevent this, the implementation not only implements
+a maximum lock depth, but also only holds at most two different locks at a
+time, as it walks the PI chain.  More about this below.
+
+
+Mutex owner and flags
+---------------------
+
+The mutex structure contains a pointer to the owner of the mutex.  If the
+mutex is not owned, this owner is set to NULL.  Since all architectures
+have the task structure on at least a four byte alignment (and if this is
+not true, the rtmutex.c code will be broken!), this allows for the two
+least significant bits to be used as flags.  This part is also described
+in Documentation/rt-mutex.txt, but will also be briefly described here.
+
+Bit 0 is used as the "Pending Owner" flag.  This is described later.
+Bit 1 is used as the "Has Waiters" flags.  This is also described later
+  in more detail, but is set whenever there are waiters on a mutex.
+
+
+cmpxchg Tricks
+--------------
+
+Some architectures implement an atomic cmpxchg (Compare and Exchange).  This
+is used (when applicable) to keep the fast path of grabbing and releasing
+mutexes short.
+
+cmpxchg is basically the following function performed atomically:
+
+unsigned long _cmpxchg(unsigned long *A, unsigned long *B, unsigned long *C)
+{
+        unsigned long T = *A;
+        if (*A == *B) {
+                *A = *C;
+        }
+        return T;
+}
+#define cmpxchg(a,b,c) _cmpxchg(&a,&b,&c)
+
+This is really nice to have, since it allows you to only update a variable
+if the variable is what you expect it to be.  You know if it succeeded if
+the return value (the old value of A) is equal to B.
+
+The macro rt_mutex_cmpxchg is used to try to lock and unlock mutexes. If
+the architecture does not support CMPXCHG, then this macro is simply set
+to fail every time.  But if CMPXCHG is supported, then this will
+help out extremely to keep the fast path short.
+
+The use of rt_mutex_cmpxchg with the flags in the owner field help optimize
+the system for architectures that support it.  This will also be explained
+later in this document.
+
+
+Priority adjustments
+--------------------
+
+The implementation of the PI code in rtmutex.c has several places that a
+process must adjust its priority.  With the help of the pi_list of a
+process this is rather easy to know what needs to be adjusted.
+
+The functions implementing the task adjustments are rt_mutex_adjust_prio,
+__rt_mutex_adjust_prio (same as the former, but expects the task pi_lock
+to already be taken), rt_mutex_get_prio, and rt_mutex_setprio.
+
+rt_mutex_getprio and rt_mutex_setprio are only used in __rt_mutex_adjust_prio.
+
+rt_mutex_getprio returns the priority that the task should have.  Either the
+task's own normal priority, or if a process of a higher priority is waiting on
+a mutex owned by the task, then that higher priority should be returned.
+Since the pi_list of a task holds an order by priority list of all the top
+waiters of all the mutexes that the task owns, rt_mutex_getprio simply needs
+to compare the top pi waiter to its own normal priority, and return the higher
+priority back.
+
+(Note:  if looking at the code, you will notice that the lower number of
+        prio is returned.  This is because the prio field in the task structure
+        is an inverse order of the actual priority.  So a "prio" of 5 is
+        of higher priority than a "prio" of 10.)
+
+__rt_mutex_adjust_prio examines the result of rt_mutex_getprio, and if the
+result does not equal the task's current priority, then rt_mutex_setprio
+is called to adjust the priority of the task to the new priority.
+Note that rt_mutex_setprio is defined in kernel/sched.c to implement the
+actual change in priority.
+
+It is interesting to note that __rt_mutex_adjust_prio can either increase
+or decrease the priority of the task.  In the case that a higher priority
+process has just blocked on a mutex owned by the task, __rt_mutex_adjust_prio
+would increase/boost the task's priority.  But if a higher priority task
+were for some reason to leave the mutex (timeout or signal), this same function
+would decrease/unboost the priority of the task.  That is because the pi_list
+always contains the highest priority task that is waiting on a mutex owned
+by the task, so we only need to compare the priority of that top pi waiter
+to the normal priority of the given task.
+
+
+High level overview of the PI chain walk
+----------------------------------------
+
+The PI chain walk is implemented by the function rt_mutex_adjust_prio_chain.
+
+The implementation has gone through several iterations, and has ended up
+with what we believe is the best.  It walks the PI chain by only grabbing
+at most two locks at a time, and is very efficient.
+
+The rt_mutex_adjust_prio_chain can be used either to boost or lower process
+priorities.
+
+rt_mutex_adjust_prio_chain is called with a task to be checked for PI
+(de)boosting (the owner of a mutex that a process is blocking on), a flag to
+check for deadlocking, the mutex that the task owns, and a pointer to a waiter
+that is the process's waiter struct that is blocked on the mutex (although this
+parameter may be NULL for deboosting).
+
+For this explanation, I will not mention deadlock detection. This explanation
+will try to stay at a high level.
+
+When this function is called, there are no locks held.  That also means
+that the state of the owner and lock can change when entered into this function.
+
+Before this function is called, the task has already had rt_mutex_adjust_prio
+performed on it.  This means that the task is set to the priority that it
+should be at, but the plist nodes of the task's waiter have not been updated
+with the new priorities, and that this task may not be in the proper locations
+in the pi_lists and wait_lists that the task is blocked on.  This function
+solves all that.
+
+A loop is entered, where task is the owner to be checked for PI changes that
+was passed by parameter (for the first iteration).  The pi_lock of this task is
+taken to prevent any more changes to the pi_list of the task.  This also
+prevents new tasks from completing the blocking on a mutex that is owned by this
+task.
+
+If the task is not blocked on a mutex then the loop is exited.  We are at
+the top of the PI chain.
+
+A check is now done to see if the original waiter (the process that is blocked
+on the current mutex) is the top pi waiter of the task.  That is, is this
+waiter on the top of the task's pi_list.  If it is not, it either means that
+there is another process higher in priority that is blocked on one of the
+mutexes that the task owns, or that the waiter has just woken up via a signal
+or timeout and has left the PI chain.  In either case, the loop is exited, since
+we don't need to do any more changes to the priority of the current task, or any
+task that owns a mutex that this current task is waiting on.  A priority chain
+walk is only needed when a new top pi waiter is made to a task.
+
+The next check sees if the task's waiter plist node has the priority equal to
+the priority the task is set at.  If they are equal, then we are done with
+the loop.  Remember that the function started with the priority of the
+task adjusted, but the plist nodes that hold the task in other processes
+pi_lists have not been adjusted.
+
+Next, we look at the mutex that the task is blocked on. The mutex's wait_lock
+is taken.  This is done by a spin_trylock, because the locking order of the
+pi_lock and wait_lock goes in the opposite direction. If we fail to grab the
+lock, the pi_lock is released, and we restart the loop.
+
+Now that we have both the pi_lock of the task as well as the wait_lock of
+the mutex the task is blocked on, we update the task's waiter's plist node
+that is located on the mutex's wait_list.
+
+Now we release the pi_lock of the task.
+
+Next the owner of the mutex has its pi_lock taken, so we can update the
+task's entry in the owner's pi_list.  If the task is the highest priority
+process on the mutex's wait_list, then we remove the previous top waiter
+from the owner's pi_list, and replace it with the task.
+
+Note: It is possible that the task was the current top waiter on the mutex,
+      in which case the task is not yet on the pi_list of the waiter.  This
+      is OK, since plist_del does nothing if the plist node is not on any
+      list.
+
+If the task was not the top waiter of the mutex, but it was before we
+did the priority updates, that means we are deboosting/lowering the
+task.  In this case, the task is removed from the pi_list of the owner,
+and the new top waiter is added.
+
+Lastly, we unlock both the pi_lock of the task, as well as the mutex's
+wait_lock, and continue the loop again.  On the next iteration of the
+loop, the previous owner of the mutex will be the task that will be
+processed.
+
+Note: One might think that the owner of this mutex might have changed
+      since we just grab the mutex's wait_lock. And one could be right.
+      The important thing to remember is that the owner could not have
+      become the task that is being processed in the PI chain, since
+      we have taken that task's pi_lock at the beginning of the loop.
+      So as long as there is an owner of this mutex that is not the same
+      process as the tasked being worked on, we are OK.
+
+      Looking closely at the code, one might be confused.  The check for the
+      end of the PI chain is when the task isn't blocked on anything or the
+      task's waiter structure "task" element is NULL.  This check is
+      protected only by the task's pi_lock.  But the code to unlock the mutex
+      sets the task's waiter structure "task" element to NULL with only
+      the protection of the mutex's wait_lock, which was not taken yet.
+      Isn't this a race condition if the task becomes the new owner?
+
+      The answer is No!  The trick is the spin_trylock of the mutex's
+      wait_lock.  If we fail that lock, we release the pi_lock of the
+      task and continue the loop, doing the end of PI chain check again.
+
+      In the code to release the lock, the wait_lock of the mutex is held
+      the entire time, and it is not let go when we grab the pi_lock of the
+      new owner of the mutex.  So if the switch of a new owner were to happen
+      after the check for end of the PI chain and the grabbing of the
+      wait_lock, the unlocking code would spin on the new owner's pi_lock
+      but never give up the wait_lock.  So the PI chain loop is guaranteed to
+      fail the spin_trylock on the wait_lock, release the pi_lock, and
+      try again.
+
+      If you don't quite understand the above, that's OK. You don't have to,
+      unless you really want to make a proof out of it ;)
+
+
+Pending Owners and Lock stealing
+--------------------------------
+
+One of the flags in the owner field of the mutex structure is "Pending Owner".
+What this means is that an owner was chosen by the process releasing the
+mutex, but that owner has yet to wake up and actually take the mutex.
+
+Why is this important?  Why can't we just give the mutex to another process
+and be done with it?
+
+The PI code is to help with real-time processes, and to let the highest
+priority process run as long as possible with little latencies and delays.
+If a high priority process owns a mutex that a lower priority process is
+blocked on, when the mutex is released it would be given to the lower priority
+process.  What if the higher priority process wants to take that mutex again.
+The high priority process would fail to take that mutex that it just gave up
+and it would need to boost the lower priority process to run with full
+latency of that critical section (since the low priority process just entered
+it).
+
+There's no reason a high priority process that gives up a mutex should be
+penalized if it tries to take that mutex again.  If the new owner of the
+mutex has not woken up yet, there's no reason that the higher priority process
+could not take that mutex away.
+
+To solve this, we introduced Pending Ownership and Lock Stealing.  When a
+new process is given a mutex that it was blocked on, it is only given
+pending ownership.  This means that it's the new owner, unless a higher
+priority process comes in and tries to grab that mutex.  If a higher priority
+process does come along and wants that mutex, we let the higher priority
+process "steal" the mutex from the pending owner (only if it is still pending)
+and continue with the mutex.
+
+
+Taking of a mutex (The walk through)
+------------------------------------
+
+OK, now let's take a look at the detailed walk through of what happens when
+taking a mutex.
+
+The first thing that is tried is the fast taking of the mutex.  This is
+done when we have CMPXCHG enabled (otherwise the fast taking automatically
+fails).  Only when the owner field of the mutex is NULL can the lock be
+taken with the CMPXCHG and nothing else needs to be done.
+
+If there is contention on the lock, whether it is owned or pending owner
+we go about the slow path (rt_mutex_slowlock).
+
+The slow path function is where the task's waiter structure is created on
+the stack.  This is because the waiter structure is only needed for the
+scope of this function.  The waiter structure holds the nodes to store
+the task on the wait_list of the mutex, and if need be, the pi_list of
+the owner.
+
+The wait_lock of the mutex is taken since the slow path of unlocking the
+mutex also takes this lock.
+
+We then call try_to_take_rt_mutex.  This is where the architecture that
+does not implement CMPXCHG would always grab the lock (if there's no
+contention).
+
+try_to_take_rt_mutex is used every time the task tries to grab a mutex in the
+slow path.  The first thing that is done here is an atomic setting of
+the "Has Waiters" flag of the mutex's owner field.  Yes, this could really
+be false, because if the the mutex has no owner, there are no waiters and
+the current task also won't have any waiters.  But we don't have the lock
+yet, so we assume we are going to be a waiter.  The reason for this is to
+play nice for those architectures that do have CMPXCHG.  By setting this flag
+now, the owner of the mutex can't release the mutex without going into the
+slow unlock path, and it would then need to grab the wait_lock, which this
+code currently holds.  So setting the "Has Waiters" flag forces the owner
+to synchronize with this code.
+
+Now that we know that we can't have any races with the owner releasing the
+mutex, we check to see if we can take the ownership.  This is done if the
+mutex doesn't have a owner, or if we can steal the mutex from a pending
+owner.  Let's look at the situations we have here.
+
+  1) Has owner that is pending
+  ----------------------------
+
+  The mutex has a owner, but it hasn't woken up and the mutex flag
+  "Pending Owner" is set.  The first check is to see if the owner isn't the
+  current task.  This is because this function is also used for the pending
+  owner to grab the mutex.  When a pending owner wakes up, it checks to see
+  if it can take the mutex, and this is done if the owner is already set to
+  itself.  If so, we succeed and leave the function, clearing the "Pending
+  Owner" bit.
+
+  If the pending owner is not current, we check to see if the current priority is
+  higher than the pending owner.  If not, we fail the function and return.
+
+  There's also something special about a pending owner.  That is a pending owner
+  is never blocked on a mutex.  So there is no PI chain to worry about.  It also
+  means that if the mutex doesn't have any waiters, there's no accounting needed
+  to update the pending owner's pi_list, since we only worry about processes
+  blocked on the current mutex.
+
+  If there are waiters on this mutex, and we just stole the ownership, we need
+  to take the top waiter, remove it from the pi_list of the pending owner, and
+  add it to the current pi_list.  Note that at this moment, the pending owner
+  is no longer on the list of waiters.  This is fine, since the pending owner
+  would add itself back when it realizes that it had the ownership stolen
+  from itself.  When the pending owner tries to grab the mutex, it will fail
+  in try_to_take_rt_mutex if the owner field points to another process.
+
+  2) No owner
+  -----------
+
+  If there is no owner (or we successfully stole the lock), we set the owner
+  of the mutex to current, and set the flag of "Has Waiters" if the current
+  mutex actually has waiters, or we clear the flag if it doesn't.  See, it was
+  OK that we set that flag early, since now it is cleared.
+
+  3) Failed to grab ownership
+  ---------------------------
+
+  The most interesting case is when we fail to take ownership. This means that
+  there exists an owner, or there's a pending owner with equal or higher
+  priority than the current task.
+
+We'll continue on the failed case.
+
+If the mutex has a timeout, we set up a timer to go off to break us out
+of this mutex if we failed to get it after a specified amount of time.
+
+Now we enter a loop that will continue to try to take ownership of the mutex, or
+fail from a timeout or signal.
+
+Once again we try to take the mutex.  This will usually fail the first time
+in the loop, since it had just failed to get the mutex.  But the second time
+in the loop, this would likely succeed, since the task would likely be
+the pending owner.
+
+If the mutex is TASK_INTERRUPTIBLE a check for signals and timeout is done
+here.
+
+The waiter structure has a "task" field that points to the task that is blocked
+on the mutex.  This field can be NULL the first time it goes through the loop
+or if the task is a pending owner and had it's mutex stolen.  If the "task"
+field is NULL then we need to set up the accounting for it.
+
+Task blocks on mutex
+--------------------
+
+The accounting of a mutex and process is done with the waiter structure of
+the process.  The "task" field is set to the process, and the "lock" field
+to the mutex.  The plist nodes are initialized to the processes current
+priority.
+
+Since the wait_lock was taken at the entry of the slow lock, we can safely
+add the waiter to the wait_list.  If the current process is the highest
+priority process currently waiting on this mutex, then we remove the
+previous top waiter process (if it exists) from the pi_list of the owner,
+and add the current process to that list.  Since the pi_list of the owner
+has changed, we call rt_mutex_adjust_prio on the owner to see if the owner
+should adjust its priority accordingly.
+
+If the owner is also blocked on a lock, and had its pi_list changed
+(or deadlock checking is on), we unlock the wait_lock of the mutex and go ahead
+and run rt_mutex_adjust_prio_chain on the owner, as described earlier.
+
+Now all locks are released, and if the current process is still blocked on a
+mutex (waiter "task" field is not NULL), then we go to sleep (call schedule).
+
+Waking up in the loop
+---------------------
+
+The schedule can then wake up for a few reasons.
+  1) we were given pending ownership of the mutex.
+  2) we received a signal and was TASK_INTERRUPTIBLE
+  3) we had a timeout and was TASK_INTERRUPTIBLE
+
+In any of these cases, we continue the loop and once again try to grab the
+ownership of the mutex.  If we succeed, we exit the loop, otherwise we continue
+and on signal and timeout, will exit the loop, or if we had the mutex stolen
+we just simply add ourselves back on the lists and go back to sleep.
+
+Note: For various reasons, because of timeout and signals, the steal mutex
+      algorithm needs to be careful. This is because the current process is
+      still on the wait_list. And because of dynamic changing of priorities,
+      especially on SCHED_OTHER tasks, the current process can be the
+      highest priority task on the wait_list.
+
+Failed to get mutex on Timeout or Signal
+----------------------------------------
+
+If a timeout or signal occurred, the waiter's "task" field would not be
+NULL and the task needs to be taken off the wait_list of the mutex and perhaps
+pi_list of the owner.  If this process was a high priority process, then
+the rt_mutex_adjust_prio_chain needs to be executed again on the owner,
+but this time it will be lowering the priorities.
+
+
+Unlocking the Mutex
+-------------------
+
+The unlocking of a mutex also has a fast path for those architectures with
+CMPXCHG.  Since the taking of a mutex on contention always sets the
+"Has Waiters" flag of the mutex's owner, we use this to know if we need to
+take the slow path when unlocking the mutex.  If the mutex doesn't have any
+waiters, the owner field of the mutex would equal the current process and
+the mutex can be unlocked by just replacing the owner field with NULL.
+
+If the owner field has the "Has Waiters" bit set (or CMPXCHG is not available),
+the slow unlock path is taken.
+
+The first thing done in the slow unlock path is to take the wait_lock of the
+mutex.  This synchronizes the locking and unlocking of the mutex.
+
+A check is made to see if the mutex has waiters or not.  On architectures that
+do not have CMPXCHG, this is the location that the owner of the mutex will
+determine if a waiter needs to be awoken or not.  On architectures that
+do have CMPXCHG, that check is done in the fast path, but it is still needed
+in the slow path too.  If a waiter of a mutex woke up because of a signal
+or timeout between the time the owner failed the fast path CMPXCHG check and
+the grabbing of the wait_lock, the mutex may not have any waiters, thus the
+owner still needs to make this check. If there are no waiters than the mutex
+owner field is set to NULL, the wait_lock is released and nothing more is
+needed.
+
+If there are waiters, then we need to wake one up and give that waiter
+pending ownership.
+
+On the wake up code, the pi_lock of the current owner is taken.  The top
+waiter of the lock is found and removed from the wait_list of the mutex
+as well as the pi_list of the current owner.  The task field of the new
+pending owner's waiter structure is set to NULL, and the owner field of the
+mutex is set to the new owner with the "Pending Owner" bit set, as well
+as the "Has Waiters" bit if there still are other processes blocked on the
+mutex.
+
+The pi_lock of the previous owner is released, and the new pending owner's
+pi_lock is taken.  Remember that this is the trick to prevent the race
+condition in rt_mutex_adjust_prio_chain from adding itself as a waiter
+on the mutex.
+
+We now clear the "pi_blocked_on" field of the new pending owner, and if
+the mutex still has waiters pending, we add the new top waiter to the pi_list
+of the pending owner.
+
+Finally we unlock the pi_lock of the pending owner and wake it up.
+
+
+Contact
+-------
+
+For updates on this document, please email Steven Rostedt <rostedt@goodmis.org>
+
+
+Credits
+-------
+
+Author:  Steven Rostedt <rostedt@goodmis.org>
+
+Reviewers:  Ingo Molnar, Thomas Gleixner, Thomas Duetsch, and Randy Dunlap
+
+Updates
+-------
+
+This document was originally written for 2.6.17-rc3-mm1
diff --git a/Documentation/rt-mutex.txt b/Documentation/rt-mutex.txt
new file mode 100644
index 000000000000..243393d882ee
--- /dev/null
+++ b/Documentation/rt-mutex.txt
@@ -0,0 +1,79 @@
+RT-mutex subsystem with PI support
+----------------------------------
+
+RT-mutexes with priority inheritance are used to support PI-futexes,
+which enable pthread_mutex_t priority inheritance attributes
+(PTHREAD_PRIO_INHERIT). [See Documentation/pi-futex.txt for more details
+about PI-futexes.]
+
+This technology was developed in the -rt tree and streamlined for
+pthread_mutex support.
+
+Basic principles:
+-----------------
+
+RT-mutexes extend the semantics of simple mutexes by the priority
+inheritance protocol.
+
+A low priority owner of a rt-mutex inherits the priority of a higher
+priority waiter until the rt-mutex is released. If the temporarily
+boosted owner blocks on a rt-mutex itself it propagates the priority
+boosting to the owner of the other rt_mutex it gets blocked on. The
+priority boosting is immediately removed once the rt_mutex has been
+unlocked.
+
+This approach allows us to shorten the block of high-prio tasks on
+mutexes which protect shared resources. Priority inheritance is not a
+magic bullet for poorly designed applications, but it allows
+well-designed applications to use userspace locks in critical parts of
+an high priority thread, without losing determinism.
+
+The enqueueing of the waiters into the rtmutex waiter list is done in
+priority order. For same priorities FIFO order is chosen. For each
+rtmutex, only the top priority waiter is enqueued into the owner's
+priority waiters list. This list too queues in priority order. Whenever
+the top priority waiter of a task changes (for example it timed out or
+got a signal), the priority of the owner task is readjusted. [The
+priority enqueueing is handled by "plists", see include/linux/plist.h
+for more details.]
+
+RT-mutexes are optimized for fastpath operations and have no internal
+locking overhead when locking an uncontended mutex or unlocking a mutex
+without waiters. The optimized fastpath operations require cmpxchg
+support. [If that is not available then the rt-mutex internal spinlock
+is used]
+
+The state of the rt-mutex is tracked via the owner field of the rt-mutex
+structure:
+
+rt_mutex->owner holds the task_struct pointer of the owner. Bit 0 and 1
+are used to keep track of the "owner is pending" and "rtmutex has
+waiters" state.
+
+ owner          bit1    bit0
+ NULL           0       0       mutex is free (fast acquire possible)
+ NULL           0       1       invalid state
+ NULL           1       0       Transitional state*
+ NULL           1       1       invalid state
+ taskpointer    0       0       mutex is held (fast release possible)
+ taskpointer    0       1       task is pending owner
+ taskpointer    1       0       mutex is held and has waiters
+ taskpointer    1       1       task is pending owner and mutex has waiters
+
+Pending-ownership handling is a performance optimization:
+pending-ownership is assigned to the first (highest priority) waiter of
+the mutex, when the mutex is released. The thread is woken up and once
+it starts executing it can acquire the mutex. Until the mutex is taken
+by it (bit 0 is cleared) a competing higher priority thread can "steal"
+the mutex which puts the woken up thread back on the waiters list.
+
+The pending-ownership optimization is especially important for the
+uninterrupted workflow of high-prio tasks which repeatedly
+takes/releases locks that have lower-prio waiters. Without this
+optimization the higher-prio thread would ping-pong to the lower-prio
+task [because at unlock time we always assign a new owner].
+
+(*) The "mutex has waiters" bit gets set to take the lock. If the lock
+doesn't already have an owner, this bit is quickly cleared if there are
+no waiters.  So this is a transitional state to synchronize with looking
+at the owner field of the mutex and the mutex owner releasing the lock.