(2.6.20) pata_mpiix: probing cleanup (resend)

MPIIX has only single channel IDE which can be configured for either primary or
secondary legacy I/O ports and IRQ.  So, get rid of the unneeded second probe
entry in mpiix_init_one() and of the invalid (but unused anyway) enable bits in
mpiix_pre_reset().

Warning: this cleanup has only been compile-tested...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 6 insertions, 7 deletions

diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 4e97a7efccef..ca8c965179b1 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_mpiix"
-#define DRV_VERSION "0.7.4"
+#define DRV_VERSION "0.7.5"
 
 enum {
         IDETIM = 0x6C,          /* IDE control register */
@@ -49,12 +49,9 @@ enum {
 static int mpiix_pre_reset(struct ata_port *ap)
 {
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-        static const struct pci_bits mpiix_enable_bits[] = {
-                { 0x6D, 1, 0x80, 0x80 },
-                { 0x6F, 1, 0x80, 0x80 }
-        };
+        static const struct pci_bits mpiix_enable_bits = { 0x6D, 1, 0x80, 0x80 };
 
-        if (!pci_test_config_bits(pdev, &mpiix_enable_bits[ap->port_no]))
+        if (!pci_test_config_bits(pdev, &mpiix_enable_bits))
                 return -ENOENT;
         ap->cbl = ATA_CBL_PATA40;
         return ata_std_prereset(ap);
@@ -219,6 +216,7 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
         if (!(idetim & ENABLED))
                 return -ENODEV;
 
+        /* See if it's primary or secondary channel... */
         if (!(idetim & SECONDARY)) {
                 irq = 14;
                 cmd_addr = devm_ioport_map(&dev->dev, 0x1F0, 8);
@@ -243,10 +241,11 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
         probe.port_ops = &mpiix_port_ops;
         probe.sht = &mpiix_sht;
         probe.pio_mask = 0x1F;
-        probe.irq = irq;
         probe.irq_flags = SA_SHIRQ;
         probe.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
         probe.n_ports = 1;
+
+        probe.irq = irq;
         probe.port[0].cmd_addr = cmd_addr;
         probe.port[0].ctl_addr = ctl_addr;
         probe.port[0].altstatus_addr = ctl_addr;