[PATCH] libata kernel-doc fixes

Correct some function names in kernel-doc.
Add some kernel-doc descriptions.
Fix some typos.
Remove a few blank lines.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

1 files changed, 14 insertions, 22 deletions

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index d55f12dacfcb..dcd3b5553cc8 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -87,7 +87,7 @@ MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
 /**
- *      ata_tf_load - send taskfile registers to host controller
+ *      ata_tf_load_pio - send taskfile registers to host controller
  *      @ap: Port to which output is sent
  *      @tf: ATA taskfile register set
  *
@@ -2701,13 +2701,13 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
 
 /**
  *      ata_pio_poll -
- *      @ap:
+ *      @ap: the target ata_port
  *
  *      LOCKING:
  *      None.  (executing in kernel thread context)
  *
  *      RETURNS:
- *
+ *      timeout value to use
  */
 
 static unsigned long ata_pio_poll(struct ata_port *ap)
@@ -2748,8 +2748,8 @@ static unsigned long ata_pio_poll(struct ata_port *ap)
 }
 
 /**
- *      ata_pio_complete -
- *      @ap:
+ *      ata_pio_complete - check if drive is busy or idle
+ *      @ap: the target ata_port
  *
  *      LOCKING:
  *      None.  (executing in kernel thread context)
@@ -2801,7 +2801,7 @@ static int ata_pio_complete (struct ata_port *ap)
 
 
 /**
- *      swap_buf_le16 -
+ *      swap_buf_le16 - swap halves of 16-words in place
  *      @buf:  Buffer to swap
  *      @buf_words:  Number of 16-bit words in buffer.
  *
@@ -2810,6 +2810,7 @@ static int ata_pio_complete (struct ata_port *ap)
  *      vice-versa.
  *
  *      LOCKING:
+ *      Inherited from caller.
  */
 void swap_buf_le16(u16 *buf, unsigned int buf_words)
 {
@@ -2832,7 +2833,6 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
  *
  *      LOCKING:
  *      Inherited from caller.
- *
  */
 
 static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf,
@@ -2878,7 +2878,6 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf,
  *
  *      LOCKING:
  *      Inherited from caller.
- *
  */
 
 static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf,
@@ -2918,7 +2917,6 @@ static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf,
  *
  *      LOCKING:
  *      Inherited from caller.
- *
  */
 
 static void ata_data_xfer(struct ata_port *ap, unsigned char *buf,
@@ -3071,7 +3069,6 @@ next_sg:
  *
  *      LOCKING:
  *      Inherited from caller.
- *
  */
 
 static void atapi_pio_bytes(struct ata_queued_cmd *qc)
@@ -3107,8 +3104,8 @@ err_out:
 }
 
 /**
- *      ata_pio_sector -
- *      @ap:
+ *      ata_pio_block - start PIO on a block
+ *      @ap: the target ata_port
  *
  *      LOCKING:
  *      None.  (executing in kernel thread context)
@@ -3120,7 +3117,7 @@ static void ata_pio_block(struct ata_port *ap)
         u8 status;
 
         /*
-         * This is purely hueristic.  This is a fast path.
+         * This is purely heuristic.  This is a fast path.
          * Sometimes when we enter, BSY will be cleared in
          * a chk-status or two.  If not, the drive is probably seeking
          * or something.  Snooze for a couple msecs, then
@@ -3440,7 +3437,6 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc)
  *
  *      LOCKING:
  *      spin_lock_irqsave(host_set lock)
- *
  */
 void ata_qc_free(struct ata_queued_cmd *qc)
 {
@@ -3460,7 +3456,6 @@ void ata_qc_free(struct ata_queued_cmd *qc)
  *
  *      LOCKING:
  *      spin_lock_irqsave(host_set lock)
- *
  */
 
 void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
@@ -3954,7 +3949,6 @@ idle_irq:
  *
  *      RETURNS:
  *      IRQ_NONE or IRQ_HANDLED.
- *
  */
 
 irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
@@ -4066,6 +4060,7 @@ err_out:
  *      May be used as the port_start() entry in ata_port_operations.
  *
  *      LOCKING:
+ *      Inherited from caller.
  */
 
 int ata_port_start (struct ata_port *ap)
@@ -4091,6 +4086,7 @@ int ata_port_start (struct ata_port *ap)
  *      May be used as the port_stop() entry in ata_port_operations.
  *
  *      LOCKING:
+ *      Inherited from caller.
  */
 
 void ata_port_stop (struct ata_port *ap)
@@ -4113,6 +4109,7 @@ void ata_host_stop (struct ata_host_set *host_set)
  *      @do_unregister: 1 if we fully unregister, 0 to just stop the port
  *
  *      LOCKING:
+ *      Inherited from caller.
  */
 
 static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
@@ -4140,7 +4137,6 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
  *
  *      LOCKING:
  *      Inherited from caller.
- *
  */
 
 static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
@@ -4201,7 +4197,6 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
  *
  *      RETURNS:
  *      New ata_port on success, for NULL on error.
- *
  */
 
 static struct ata_port * ata_host_add(const struct ata_probe_ent *ent,
@@ -4249,7 +4244,6 @@ err_out:
  *
  *      RETURNS:
  *      Number of ports registered.  Zero on error (no ports registered).
- *
  */
 
 int ata_device_add(const struct ata_probe_ent *ent)
@@ -4381,7 +4375,6 @@ err_out:
  *      Inherited from calling layer (may sleep).
  */
 
-
 void ata_host_set_remove(struct ata_host_set *host_set)
 {
         struct ata_port *ap;
@@ -4614,7 +4607,6 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, stru
  *
  *      RETURNS:
  *      Zero on success, negative on errno-based value on error.
- *
  */
 
 int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
@@ -4762,7 +4754,7 @@ err_out:
  *      @pdev: PCI device that was removed
  *
  *      PCI layer indicates to libata via this hook that
- *      hot-unplug or module unload event has occured.
+ *      hot-unplug or module unload event has occurred.
  *      Handle this by unregistering all objects associated
  *      with this PCI device.  Free those objects.  Then finally
  *      release PCI resources and disable device.