spi: rspi: Add more QSPI register documentation

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

1 files changed, 19 insertions, 6 deletions

diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 1f69343689f9..4a2c7592b5eb 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -62,12 +62,12 @@
 #define RSPI_SPBFDR             0x22    /* Buffer Data Count Setting Register */
 
 /*qspi only */
-#define QSPI_SPBFCR             0x18
-#define QSPI_SPBDCR             0x1a
-#define QSPI_SPBMUL0            0x1c
-#define QSPI_SPBMUL1            0x20
-#define QSPI_SPBMUL2            0x24
-#define QSPI_SPBMUL3            0x28
+#define QSPI_SPBFCR             0x18    /* Buffer Control Register */
+#define QSPI_SPBDCR             0x1a    /* Buffer Data Count Register */
+#define QSPI_SPBMUL0            0x1c    /* Transfer Data Length Multiplier Setting Register 0 */
+#define QSPI_SPBMUL1            0x20    /* Transfer Data Length Multiplier Setting Register 1 */
+#define QSPI_SPBMUL2            0x24    /* Transfer Data Length Multiplier Setting Register 2 */
+#define QSPI_SPBMUL3            0x28    /* Transfer Data Length Multiplier Setting Register 3 */
 
 /* SPCR - Control Register */
 #define SPCR_SPRIE              0x80    /* Receive Interrupt Enable */
@@ -79,6 +79,9 @@
 /* RSPI on SH only */
 #define SPCR_TXMD               0x02    /* TX Only Mode (vs. Full Duplex) */
 #define SPCR_SPMS               0x01    /* 3-wire Mode (vs. 4-wire) */
+/* QSPI on R-Car M2 only */
+#define SPCR_WSWAP              0x02    /* Word Swap of read-data for DMAC */
+#define SPCR_BSWAP              0x01    /* Byte Swap of read-data for DMAC */
 
 /* SSLP - Slave Select Polarity Register */
 #define SSLP_SSL1P              0x02    /* SSL1 Signal Polarity Setting */
@@ -91,6 +94,9 @@
 #define SPPCR_SPLP2             0x02    /* Loopback Mode 2 (non-inverting) */
 #define SPPCR_SPLP              0x01    /* Loopback Mode (inverting) */
 
+#define SPPCR_IO3FV             0x04    /* Single-/Dual-SPI Mode IO3 Output Fixed Value */
+#define SPPCR_IO2FV             0x04    /* Single-/Dual-SPI Mode IO2 Output Fixed Value */
+
 /* SPSR - Status Register */
 #define SPSR_SPRF               0x80    /* Receive Buffer Full Flag */
 #define SPSR_TEND               0x40    /* Transmit End */
@@ -151,6 +157,13 @@
 #define SPCMD_SPB_24BIT         0x0100
 #define SPCMD_SPB_32BIT         0x0200
 #define SPCMD_SSLKP             0x0080  /* SSL Signal Level Keeping */
+#define SPCMD_SPIMOD_MASK       0x0060  /* SPI Operating Mode (QSPI only) */
+#define SPCMD_SPIMOD1           0x0040
+#define SPCMD_SPIMOD0           0x0020
+#define SPCMD_SPIMOD_SINGLE     0
+#define SPCMD_SPIMOD_DUAL       SPCMD_SPIMOD0
+#define SPCMD_SPIMOD_QUAD       SPCMD_SPIMOD1
+#define SPCMD_SPRW              0x0010  /* SPI Read/Write Access (Dual/Quad) */
 #define SPCMD_SSLA_MASK         0x0030  /* SSL Assert Signal Setting (RSPI) */
 #define SPCMD_BRDV_MASK         0x000c  /* Bit Rate Division Setting */
 #define SPCMD_CPOL              0x0002  /* Clock Polarity Setting */