diff options
| author | Laxman Dewangan <ldewangan@nvidia.com> | 2012-05-14 03:16:12 -0400 |
|---|---|---|
| committer | Grant Likely <grant.likely@secretlab.ca> | 2012-05-19 00:59:28 -0400 |
| commit | e9fe32bcadb8a7a40411d77f168abd45941b049b (patch) | |
| tree | 5ba1c23de8ca09b7d22ee16b8ac2b0c5bbd49fab | |
| parent | ee1c1e7d6451204e71ae6d815bfa918c57450391 (diff) | |
gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583
The PMIC device RC5T583 from RICOH supports 8 gpios.
Adding gpio driver for this device to access the pins
control through gpio library.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
[grant.likely: slight cosmetic changes]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| -rw-r--r-- | drivers/gpio/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/gpio/Makefile | 1 | ||||
| -rw-r--r-- | drivers/gpio/gpio-rc5t583.c | 180 | ||||
| -rw-r--r-- | include/linux/mfd/rc5t583.h | 2 |
4 files changed, 192 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 25535ebf4f90..7028f7bee7fc 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig | |||
| @@ -301,6 +301,15 @@ config GPIO_PCF857X | |||
| 301 | This driver provides an in-kernel interface to those GPIOs using | 301 | This driver provides an in-kernel interface to those GPIOs using |
| 302 | platform-neutral GPIO calls. | 302 | platform-neutral GPIO calls. |
| 303 | 303 | ||
| 304 | config GPIO_RC5T583 | ||
| 305 | bool "RICOH RC5T583 GPIO" | ||
| 306 | depends on MFD_RC5T583 | ||
| 307 | help | ||
| 308 | Select this option to enable GPIO driver for the Ricoh RC5T583 | ||
| 309 | chip family. | ||
| 310 | This driver provides the support for driving/reading the gpio pins | ||
| 311 | of RC5T583 device through standard gpio library. | ||
| 312 | |||
| 304 | config GPIO_SX150X | 313 | config GPIO_SX150X |
| 305 | bool "Semtech SX150x I2C GPIO expander" | 314 | bool "Semtech SX150x I2C GPIO expander" |
| 306 | depends on I2C=y | 315 | depends on I2C=y |
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 7862f49b4d05..8f36637b4ae3 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile | |||
| @@ -45,6 +45,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o | |||
| 45 | obj-$(CONFIG_GPIO_PCH) += gpio-pch.o | 45 | obj-$(CONFIG_GPIO_PCH) += gpio-pch.o |
| 46 | obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o | 46 | obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o |
| 47 | obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o | 47 | obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o |
| 48 | obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o | ||
| 48 | obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o | 49 | obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o |
| 49 | obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o | 50 | obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o |
| 50 | obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o | 51 | obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o |
diff --git a/drivers/gpio/gpio-rc5t583.c b/drivers/gpio/gpio-rc5t583.c new file mode 100644 index 000000000000..08428bf17718 --- /dev/null +++ b/drivers/gpio/gpio-rc5t583.c | |||
| @@ -0,0 +1,180 @@ | |||
| 1 | /* | ||
| 2 | * GPIO driver for RICOH583 power management chip. | ||
| 3 | * | ||
| 4 | * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. | ||
| 5 | * Author: Laxman dewangan <ldewangan@nvidia.com> | ||
| 6 | * | ||
| 7 | * Based on code | ||
| 8 | * Copyright (C) 2011 RICOH COMPANY,LTD | ||
| 9 | * | ||
| 10 | * This program is free software; you can redistribute it and/or modify it | ||
| 11 | * under the terms and conditions of the GNU General Public License, | ||
| 12 | * version 2, as published by the Free Software Foundation. | ||
| 13 | * | ||
| 14 | * This program is distributed in the hope it will be useful, but WITHOUT | ||
| 15 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
| 16 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
| 17 | * more details. | ||
| 18 | * | ||
| 19 | * You should have received a copy of the GNU General Public License | ||
| 20 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | ||
| 21 | * | ||
| 22 | */ | ||
| 23 | #include <linux/init.h> | ||
| 24 | #include <linux/kernel.h> | ||
| 25 | #include <linux/slab.h> | ||
| 26 | #include <linux/module.h> | ||
| 27 | #include <linux/platform_device.h> | ||
| 28 | #include <linux/device.h> | ||
| 29 | #include <linux/gpio.h> | ||
| 30 | #include <linux/mfd/rc5t583.h> | ||
| 31 | |||
| 32 | struct rc5t583_gpio { | ||
| 33 | struct gpio_chip gpio_chip; | ||
| 34 | struct rc5t583 *rc5t583; | ||
| 35 | }; | ||
| 36 | |||
| 37 | static inline struct rc5t583_gpio *to_rc5t583_gpio(struct gpio_chip *chip) | ||
| 38 | { | ||
| 39 | return container_of(chip, struct rc5t583_gpio, gpio_chip); | ||
| 40 | } | ||
| 41 | |||
| 42 | static int rc5t583_gpio_get(struct gpio_chip *gc, unsigned int offset) | ||
| 43 | { | ||
| 44 | struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc); | ||
| 45 | struct device *parent = rc5t583_gpio->rc5t583->dev; | ||
| 46 | uint8_t val = 0; | ||
| 47 | int ret; | ||
| 48 | |||
| 49 | ret = rc5t583_read(parent, RC5T583_GPIO_MON_IOIN, &val); | ||
| 50 | if (ret < 0) | ||
| 51 | return ret; | ||
| 52 | |||
| 53 | return !!(val & BIT(offset)); | ||
| 54 | } | ||
| 55 | |||
| 56 | static void rc5t583_gpio_set(struct gpio_chip *gc, unsigned int offset, int val) | ||
| 57 | { | ||
| 58 | struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc); | ||
| 59 | struct device *parent = rc5t583_gpio->rc5t583->dev; | ||
| 60 | if (val) | ||
| 61 | rc5t583_set_bits(parent, RC5T583_GPIO_IOOUT, BIT(offset)); | ||
| 62 | else | ||
| 63 | rc5t583_clear_bits(parent, RC5T583_GPIO_IOOUT, BIT(offset)); | ||
| 64 | } | ||
| 65 | |||
| 66 | static int rc5t583_gpio_dir_input(struct gpio_chip *gc, unsigned int offset) | ||
| 67 | { | ||
| 68 | struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc); | ||
| 69 | struct device *parent = rc5t583_gpio->rc5t583->dev; | ||
| 70 | int ret; | ||
| 71 | |||
| 72 | ret = rc5t583_clear_bits(parent, RC5T583_GPIO_IOSEL, BIT(offset)); | ||
| 73 | if (ret < 0) | ||
| 74 | return ret; | ||
| 75 | |||
| 76 | /* Set pin to gpio mode */ | ||
| 77 | return rc5t583_clear_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset)); | ||
| 78 | } | ||
| 79 | |||
| 80 | static int rc5t583_gpio_dir_output(struct gpio_chip *gc, unsigned offset, | ||
| 81 | int value) | ||
| 82 | { | ||
| 83 | struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc); | ||
| 84 | struct device *parent = rc5t583_gpio->rc5t583->dev; | ||
| 85 | int ret; | ||
| 86 | |||
| 87 | rc5t583_gpio_set(gc, offset, value); | ||
| 88 | ret = rc5t583_set_bits(parent, RC5T583_GPIO_IOSEL, BIT(offset)); | ||
| 89 | if (ret < 0) | ||
| 90 | return ret; | ||
| 91 | |||
| 92 | /* Set pin to gpio mode */ | ||
| 93 | return rc5t583_clear_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset)); | ||
| 94 | } | ||
| 95 | |||
| 96 | static int rc5t583_gpio_to_irq(struct gpio_chip *gc, unsigned offset) | ||
| 97 | { | ||
| 98 | struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc); | ||
| 99 | |||
| 100 | if ((offset >= 0) && (offset < 8)) | ||
| 101 | return rc5t583_gpio->rc5t583->irq_base + | ||
| 102 | RC5T583_IRQ_GPIO0 + offset; | ||
| 103 | return -EINVAL; | ||
| 104 | } | ||
| 105 | |||
| 106 | static void rc5t583_gpio_free(struct gpio_chip *gc, unsigned offset) | ||
| 107 | { | ||
| 108 | struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc); | ||
| 109 | struct device *parent = rc5t583_gpio->rc5t583->dev; | ||
| 110 | |||
| 111 | rc5t583_set_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset)); | ||
| 112 | } | ||
| 113 | |||
| 114 | static int __devinit rc5t583_gpio_probe(struct platform_device *pdev) | ||
| 115 | { | ||
| 116 | struct rc5t583 *rc5t583 = dev_get_drvdata(pdev->dev.parent); | ||
| 117 | struct rc5t583_platform_data *pdata = dev_get_platdata(rc5t583->dev); | ||
| 118 | struct rc5t583_gpio *rc5t583_gpio; | ||
| 119 | |||
| 120 | rc5t583_gpio = devm_kzalloc(&pdev->dev, sizeof(*rc5t583_gpio), | ||
| 121 | GFP_KERNEL); | ||
| 122 | if (!rc5t583_gpio) { | ||
| 123 | dev_warn(&pdev->dev, "Mem allocation for rc5t583_gpio failed"); | ||
| 124 | return -ENOMEM; | ||
| 125 | } | ||
| 126 | |||
| 127 | rc5t583_gpio->gpio_chip.label = "gpio-rc5t583", | ||
| 128 | rc5t583_gpio->gpio_chip.owner = THIS_MODULE, | ||
| 129 | rc5t583_gpio->gpio_chip.free = rc5t583_gpio_free, | ||
| 130 | rc5t583_gpio->gpio_chip.direction_input = rc5t583_gpio_dir_input, | ||
| 131 | rc5t583_gpio->gpio_chip.direction_output = rc5t583_gpio_dir_output, | ||
| 132 | rc5t583_gpio->gpio_chip.set = rc5t583_gpio_set, | ||
| 133 | rc5t583_gpio->gpio_chip.get = rc5t583_gpio_get, | ||
| 134 | rc5t583_gpio->gpio_chip.to_irq = rc5t583_gpio_to_irq, | ||
| 135 | rc5t583_gpio->gpio_chip.ngpio = RC5T583_MAX_GPIO, | ||
| 136 | rc5t583_gpio->gpio_chip.can_sleep = 1, | ||
| 137 | rc5t583_gpio->gpio_chip.dev = &pdev->dev; | ||
| 138 | rc5t583_gpio->gpio_chip.base = -1; | ||
| 139 | rc5t583_gpio->rc5t583 = rc5t583; | ||
| 140 | |||
| 141 | if (pdata && pdata->gpio_base) | ||
| 142 | rc5t583_gpio->gpio_chip.base = pdata->gpio_base; | ||
| 143 | |||
| 144 | platform_set_drvdata(pdev, rc5t583_gpio); | ||
| 145 | |||
| 146 | return gpiochip_add(&rc5t583_gpio->gpio_chip); | ||
| 147 | } | ||
| 148 | |||
| 149 | static int __devexit rc5t583_gpio_remove(struct platform_device *pdev) | ||
| 150 | { | ||
| 151 | struct rc5t583_gpio *rc5t583_gpio = platform_get_drvdata(pdev); | ||
| 152 | |||
| 153 | return gpiochip_remove(&rc5t583_gpio->gpio_chip); | ||
| 154 | } | ||
| 155 | |||
| 156 | static struct platform_driver rc5t583_gpio_driver = { | ||
| 157 | .driver = { | ||
| 158 | .name = "rc5t583-gpio", | ||
| 159 | .owner = THIS_MODULE, | ||
| 160 | }, | ||
| 161 | .probe = rc5t583_gpio_probe, | ||
| 162 | .remove = __devexit_p(rc5t583_gpio_remove), | ||
| 163 | }; | ||
| 164 | |||
| 165 | static int __init rc5t583_gpio_init(void) | ||
| 166 | { | ||
| 167 | return platform_driver_register(&rc5t583_gpio_driver); | ||
| 168 | } | ||
| 169 | subsys_initcall(rc5t583_gpio_init); | ||
| 170 | |||
| 171 | static void __exit rc5t583_gpio_exit(void) | ||
| 172 | { | ||
| 173 | platform_driver_unregister(&rc5t583_gpio_driver); | ||
| 174 | } | ||
| 175 | module_exit(rc5t583_gpio_exit); | ||
| 176 | |||
| 177 | MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); | ||
| 178 | MODULE_DESCRIPTION("GPIO interface for RC5T583"); | ||
| 179 | MODULE_LICENSE("GPL v2"); | ||
| 180 | MODULE_ALIAS("platform:rc5t583-gpio"); | ||
diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h index 0b64b19d81ab..7875370f7bca 100644 --- a/include/linux/mfd/rc5t583.h +++ b/include/linux/mfd/rc5t583.h | |||
| @@ -272,11 +272,13 @@ struct rc5t583 { | |||
| 272 | * rc5t583_platform_data: Platform data for ricoh rc5t583 pmu. | 272 | * rc5t583_platform_data: Platform data for ricoh rc5t583 pmu. |
| 273 | * The board specific data is provided through this structure. | 273 | * The board specific data is provided through this structure. |
| 274 | * @irq_base: Irq base number on which this device registers their interrupts. | 274 | * @irq_base: Irq base number on which this device registers their interrupts. |
| 275 | * @gpio_base: GPIO base from which gpio of this device will start. | ||
| 275 | * @enable_shutdown: Enable shutdown through the input pin "shutdown". | 276 | * @enable_shutdown: Enable shutdown through the input pin "shutdown". |
| 276 | */ | 277 | */ |
| 277 | 278 | ||
| 278 | struct rc5t583_platform_data { | 279 | struct rc5t583_platform_data { |
| 279 | int irq_base; | 280 | int irq_base; |
| 281 | int gpio_base; | ||
| 280 | bool enable_shutdown; | 282 | bool enable_shutdown; |
| 281 | }; | 283 | }; |
| 282 | 284 | ||
