aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorFranck Bui-Huu <fbuihuu@gmail.com>2007-05-07 12:01:52 -0400
committerRalf Baechle <ralf@linux-mips.org>2007-05-11 09:28:31 -0400
commitbef964e55ac128b1a6894c68171d0b22263449f8 (patch)
treef462bd850cbdc5273d6f0923350c694fc89e4abc
parent1e54f778af4467b816bf1289e7c4bf7e50067b7b (diff)
[MIPS] Remove Momenco Jaguar ATX support
It has some hackish code and it odd DMA results in the need to support old features in kernel code. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat
-rw-r--r--arch/mips/Kconfig23
-rw-r--r--arch/mips/Makefile11
-rw-r--r--arch/mips/configs/jaguar-atx_defconfig897
-rw-r--r--arch/mips/momentum/Kconfig6
-rw-r--r--arch/mips/momentum/jaguar_atx/Makefile12
-rw-r--r--arch/mips/momentum/jaguar_atx/dbg_io.c125
-rw-r--r--arch/mips/momentum/jaguar_atx/irq.c94
-rw-r--r--arch/mips/momentum/jaguar_atx/ja-console.c101
-rw-r--r--arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h54
-rw-r--r--arch/mips/momentum/jaguar_atx/platform.c208
-rw-r--r--arch/mips/momentum/jaguar_atx/prom.c210
-rw-r--r--arch/mips/momentum/jaguar_atx/reset.c56
-rw-r--r--arch/mips/momentum/jaguar_atx/setup.c475
-rw-r--r--arch/mips/pci/Makefile1
-rw-r--r--arch/mips/pci/fixup-jaguar.c43
-rw-r--r--include/asm-mips/bootinfo.h2
-rw-r--r--include/asm-mips/mach-ja/cpu-feature-overrides.h45
-rw-r--r--include/asm-mips/mach-ja/spaces.h20
-rw-r--r--include/asm-mips/serial.h19
19 files changed, 1 insertions, 2401 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index ea3c53966dfd..515c5a698040 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -369,28 +369,6 @@ config MIPS_SIM
369 This option enables support for MIPS Technologies MIPSsim software 369 This option enables support for MIPS Technologies MIPSsim software
370 emulator. 370 emulator.
371 371
372config MOMENCO_JAGUAR_ATX
373 bool "Momentum Jaguar board"
374 select BOOT_ELF32
375 select DMA_NONCOHERENT
376 select HW_HAS_PCI
377 select IRQ_CPU
378 select IRQ_CPU_RM7K
379 select IRQ_MV64340
380 select LIMITED_DMA
381 select PCI_MARVELL
382 select RM7000_CPU_SCACHE
383 select SWAP_IO_SPACE
384 select SYS_HAS_CPU_RM9000
385 select SYS_HAS_EARLY_PRINTK
386 select SYS_SUPPORTS_32BIT_KERNEL
387 select SYS_SUPPORTS_64BIT_KERNEL
388 select SYS_SUPPORTS_BIG_ENDIAN
389 select SYS_SUPPORTS_KGDB
390 help
391 The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
392 Momentum Computer <http://www.momenco.com/>.
393
394config MOMENCO_OCELOT 372config MOMENCO_OCELOT
395 bool "Momentum Ocelot board" 373 bool "Momentum Ocelot board"
396 select DMA_NONCOHERENT 374 select DMA_NONCOHERENT
@@ -806,7 +784,6 @@ source "arch/mips/ddb5xxx/Kconfig"
806source "arch/mips/gt64120/ev64120/Kconfig" 784source "arch/mips/gt64120/ev64120/Kconfig"
807source "arch/mips/jazz/Kconfig" 785source "arch/mips/jazz/Kconfig"
808source "arch/mips/lasat/Kconfig" 786source "arch/mips/lasat/Kconfig"
809source "arch/mips/momentum/Kconfig"
810source "arch/mips/pmc-sierra/Kconfig" 787source "arch/mips/pmc-sierra/Kconfig"
811source "arch/mips/sgi-ip27/Kconfig" 788source "arch/mips/sgi-ip27/Kconfig"
812source "arch/mips/sibyte/Kconfig" 789source "arch/mips/sibyte/Kconfig"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 3c85c396504b..a68d462a415f 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -379,17 +379,6 @@ cflags-$(CONFIG_BASLER_EXCITE) += -Iinclude/asm-mips/mach-excite
379load-$(CONFIG_BASLER_EXCITE) += 0x80100000 379load-$(CONFIG_BASLER_EXCITE) += 0x80100000
380 380
381# 381#
382# Momentum Jaguar ATX
383#
384core-$(CONFIG_MOMENCO_JAGUAR_ATX) += arch/mips/momentum/jaguar_atx/
385cflags-$(CONFIG_MOMENCO_JAGUAR_ATX) += -Iinclude/asm-mips/mach-ja
386#ifdef CONFIG_JAGUAR_DMALOW
387#load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0xffffffff88000000
388#else
389load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0xffffffff80100000
390#endif
391
392#
393# NEC DDB 382# NEC DDB
394# 383#
395core-$(CONFIG_DDB5XXX_COMMON) += arch/mips/ddb5xxx/common/ 384core-$(CONFIG_DDB5XXX_COMMON) += arch/mips/ddb5xxx/common/
diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig
deleted file mode 100644
index 083104daa2ca..000000000000
--- a/arch/mips/configs/jaguar-atx_defconfig
+++ /dev/null
@@ -1,897 +0,0 @@
1#
2# Automatically generated make config: don't edit
3# Linux kernel version: 2.6.20
4# Tue Feb 20 21:47:33 2007
5#
6CONFIG_MIPS=y
7
8#
9# Machine selection
10#
11CONFIG_ZONE_DMA=y
12# CONFIG_MIPS_MTX1 is not set
13# CONFIG_MIPS_BOSPORUS is not set
14# CONFIG_MIPS_PB1000 is not set
15# CONFIG_MIPS_PB1100 is not set
16# CONFIG_MIPS_PB1500 is not set
17# CONFIG_MIPS_PB1550 is not set
18# CONFIG_MIPS_PB1200 is not set
19# CONFIG_MIPS_DB1000 is not set
20# CONFIG_MIPS_DB1100 is not set
21# CONFIG_MIPS_DB1500 is not set
22# CONFIG_MIPS_DB1550 is not set
23# CONFIG_MIPS_DB1200 is not set
24# CONFIG_MIPS_MIRAGE is not set
25# CONFIG_BASLER_EXCITE is not set
26# CONFIG_MIPS_COBALT is not set
27# CONFIG_MACH_DECSTATION is not set
28# CONFIG_MIPS_EV64120 is not set
29# CONFIG_MACH_JAZZ is not set
30# CONFIG_LASAT is not set
31# CONFIG_MIPS_ATLAS is not set
32# CONFIG_MIPS_MALTA is not set
33# CONFIG_MIPS_SEAD is not set
34# CONFIG_WR_PPMC is not set
35# CONFIG_MIPS_SIM is not set
36CONFIG_MOMENCO_JAGUAR_ATX=y
37# CONFIG_MOMENCO_OCELOT is not set
38# CONFIG_MOMENCO_OCELOT_3 is not set
39# CONFIG_MOMENCO_OCELOT_C is not set
40# CONFIG_MOMENCO_OCELOT_G is not set
41# CONFIG_MIPS_XXS1500 is not set
42# CONFIG_PNX8550_JBS is not set
43# CONFIG_PNX8550_STB810 is not set
44# CONFIG_DDB5477 is not set
45# CONFIG_MACH_VR41XX is not set
46# CONFIG_PMC_YOSEMITE is not set
47# CONFIG_QEMU is not set
48# CONFIG_MARKEINS is not set
49# CONFIG_SGI_IP22 is not set
50# CONFIG_SGI_IP27 is not set
51# CONFIG_SGI_IP32 is not set
52# CONFIG_SIBYTE_BIGSUR is not set
53# CONFIG_SIBYTE_SWARM is not set
54# CONFIG_SIBYTE_SENTOSA is not set
55# CONFIG_SIBYTE_RHONE is not set
56# CONFIG_SIBYTE_CARMEL is not set
57# CONFIG_SIBYTE_PTSWARM is not set
58# CONFIG_SIBYTE_LITTLESUR is not set
59# CONFIG_SIBYTE_CRHINE is not set
60# CONFIG_SIBYTE_CRHONE is not set
61# CONFIG_SNI_RM is not set
62# CONFIG_TOSHIBA_JMR3927 is not set
63# CONFIG_TOSHIBA_RBTX4927 is not set
64# CONFIG_TOSHIBA_RBTX4938 is not set
65CONFIG_JAGUAR_DMALOW=y
66CONFIG_RWSEM_GENERIC_SPINLOCK=y
67# CONFIG_ARCH_HAS_ILOG2_U32 is not set
68# CONFIG_ARCH_HAS_ILOG2_U64 is not set
69CONFIG_GENERIC_FIND_NEXT_BIT=y
70CONFIG_GENERIC_HWEIGHT=y
71CONFIG_GENERIC_CALIBRATE_DELAY=y
72CONFIG_GENERIC_TIME=y
73CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
74# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
75CONFIG_DMA_NONCOHERENT=y
76CONFIG_DMA_NEED_PCI_MAP_STATE=y
77CONFIG_LIMITED_DMA=y
78CONFIG_CPU_BIG_ENDIAN=y
79# CONFIG_CPU_LITTLE_ENDIAN is not set
80CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
81CONFIG_IRQ_CPU=y
82CONFIG_IRQ_CPU_RM7K=y
83CONFIG_IRQ_MV64340=y
84CONFIG_PCI_MARVELL=y
85CONFIG_SWAP_IO_SPACE=y
86CONFIG_BOOT_ELF32=y
87CONFIG_MIPS_L1_CACHE_SHIFT=5
88
89#
90# CPU selection
91#
92# CONFIG_CPU_MIPS32_R1 is not set
93# CONFIG_CPU_MIPS32_R2 is not set
94# CONFIG_CPU_MIPS64_R1 is not set
95# CONFIG_CPU_MIPS64_R2 is not set
96# CONFIG_CPU_R3000 is not set
97# CONFIG_CPU_TX39XX is not set
98# CONFIG_CPU_VR41XX is not set
99# CONFIG_CPU_R4300 is not set
100# CONFIG_CPU_R4X00 is not set
101# CONFIG_CPU_TX49XX is not set
102# CONFIG_CPU_R5000 is not set
103# CONFIG_CPU_R5432 is not set
104# CONFIG_CPU_R6000 is not set
105# CONFIG_CPU_NEVADA is not set
106# CONFIG_CPU_R8000 is not set
107# CONFIG_CPU_R10000 is not set
108# CONFIG_CPU_RM7000 is not set
109CONFIG_CPU_RM9000=y
110# CONFIG_CPU_SB1 is not set
111CONFIG_SYS_HAS_CPU_RM9000=y
112CONFIG_WEAK_ORDERING=y
113CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
114CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
115CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
116CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
117
118#
119# Kernel type
120#
121CONFIG_32BIT=y
122# CONFIG_64BIT is not set
123CONFIG_PAGE_SIZE_4KB=y
124# CONFIG_PAGE_SIZE_8KB is not set
125# CONFIG_PAGE_SIZE_16KB is not set
126# CONFIG_PAGE_SIZE_64KB is not set
127CONFIG_BOARD_SCACHE=y
128CONFIG_RM7000_CPU_SCACHE=y
129CONFIG_CPU_HAS_PREFETCH=y
130CONFIG_MIPS_MT_DISABLED=y
131# CONFIG_MIPS_MT_SMP is not set
132# CONFIG_MIPS_MT_SMTC is not set
133# CONFIG_MIPS_VPE_LOADER is not set
134# CONFIG_64BIT_PHYS_ADDR is not set
135CONFIG_CPU_HAS_LLSC=y
136CONFIG_CPU_HAS_SYNC=y
137CONFIG_GENERIC_HARDIRQS=y
138CONFIG_GENERIC_IRQ_PROBE=y
139CONFIG_HIGHMEM=y
140CONFIG_CPU_SUPPORTS_HIGHMEM=y
141CONFIG_SYS_SUPPORTS_HIGHMEM=y
142CONFIG_ARCH_FLATMEM_ENABLE=y
143CONFIG_FLATMEM=y
144CONFIG_FLAT_NODE_MEM_MAP=y
145# CONFIG_SPARSEMEM_STATIC is not set
146CONFIG_SPLIT_PTLOCK_CPUS=4
147# CONFIG_RESOURCES_64BIT is not set
148CONFIG_ZONE_DMA_FLAG=1
149# CONFIG_HZ_48 is not set
150# CONFIG_HZ_100 is not set
151# CONFIG_HZ_128 is not set
152# CONFIG_HZ_250 is not set
153# CONFIG_HZ_256 is not set
154CONFIG_HZ_1000=y
155# CONFIG_HZ_1024 is not set
156CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
157CONFIG_HZ=1000
158CONFIG_PREEMPT_NONE=y
159# CONFIG_PREEMPT_VOLUNTARY is not set
160# CONFIG_PREEMPT is not set
161CONFIG_LOCKDEP_SUPPORT=y
162CONFIG_STACKTRACE_SUPPORT=y
163CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
164
165#
166# Code maturity level options
167#
168# CONFIG_EXPERIMENTAL is not set
169CONFIG_BROKEN_ON_SMP=y
170CONFIG_INIT_ENV_ARG_LIMIT=32
171
172#
173# General setup
174#
175CONFIG_LOCALVERSION=""
176CONFIG_LOCALVERSION_AUTO=y
177CONFIG_SWAP=y
178CONFIG_SYSVIPC=y
179# CONFIG_IPC_NS is not set
180CONFIG_SYSVIPC_SYSCTL=y
181# CONFIG_BSD_PROCESS_ACCT is not set
182# CONFIG_TASKSTATS is not set
183# CONFIG_UTS_NS is not set
184# CONFIG_AUDIT is not set
185CONFIG_IKCONFIG=y
186CONFIG_IKCONFIG_PROC=y
187CONFIG_SYSFS_DEPRECATED=y
188CONFIG_RELAY=y
189CONFIG_SYSCTL=y
190CONFIG_EMBEDDED=y
191CONFIG_SYSCTL_SYSCALL=y
192CONFIG_KALLSYMS=y
193# CONFIG_KALLSYMS_EXTRA_PASS is not set
194CONFIG_HOTPLUG=y
195CONFIG_PRINTK=y
196CONFIG_BUG=y
197CONFIG_ELF_CORE=y
198CONFIG_BASE_FULL=y
199CONFIG_FUTEX=y
200CONFIG_EPOLL=y
201CONFIG_SHMEM=y
202CONFIG_SLAB=y
203CONFIG_VM_EVENT_COUNTERS=y
204CONFIG_RT_MUTEXES=y
205# CONFIG_TINY_SHMEM is not set
206CONFIG_BASE_SMALL=0
207# CONFIG_SLOB is not set
208
209#
210# Loadable module support
211#
212CONFIG_MODULES=y
213CONFIG_MODULE_UNLOAD=y
214# CONFIG_MODVERSIONS is not set
215CONFIG_MODULE_SRCVERSION_ALL=y
216CONFIG_KMOD=y
217
218#
219# Block layer
220#
221CONFIG_BLOCK=y
222# CONFIG_LBD is not set
223# CONFIG_BLK_DEV_IO_TRACE is not set
224# CONFIG_LSF is not set
225
226#
227# IO Schedulers
228#
229CONFIG_IOSCHED_NOOP=y
230CONFIG_IOSCHED_AS=y
231CONFIG_IOSCHED_DEADLINE=y
232CONFIG_IOSCHED_CFQ=y
233CONFIG_DEFAULT_AS=y
234# CONFIG_DEFAULT_DEADLINE is not set
235# CONFIG_DEFAULT_CFQ is not set
236# CONFIG_DEFAULT_NOOP is not set
237CONFIG_DEFAULT_IOSCHED="anticipatory"
238
239#
240# Bus options (PCI, PCMCIA, EISA, ISA, TC)
241#
242CONFIG_HW_HAS_PCI=y
243CONFIG_PCI=y
244CONFIG_MMU=y
245
246#
247# PCCARD (PCMCIA/CardBus) support
248#
249# CONFIG_PCCARD is not set
250
251#
252# PCI Hotplug Support
253#
254
255#
256# Executable file formats
257#
258CONFIG_BINFMT_ELF=y
259# CONFIG_BINFMT_MISC is not set
260CONFIG_TRAD_SIGNALS=y
261
262#
263# Power management options
264#
265CONFIG_PM=y
266# CONFIG_PM_LEGACY is not set
267# CONFIG_PM_DEBUG is not set
268# CONFIG_PM_SYSFS_DEPRECATED is not set
269
270#
271# Networking
272#
273CONFIG_NET=y
274
275#
276# Networking options
277#
278# CONFIG_NETDEBUG is not set
279# CONFIG_PACKET is not set
280CONFIG_UNIX=y
281CONFIG_XFRM=y
282CONFIG_XFRM_USER=m
283# CONFIG_NET_KEY is not set
284CONFIG_INET=y
285# CONFIG_IP_MULTICAST is not set
286# CONFIG_IP_ADVANCED_ROUTER is not set
287CONFIG_IP_FIB_HASH=y
288CONFIG_IP_PNP=y
289# CONFIG_IP_PNP_DHCP is not set
290CONFIG_IP_PNP_BOOTP=y
291# CONFIG_IP_PNP_RARP is not set
292# CONFIG_NET_IPIP is not set
293# CONFIG_NET_IPGRE is not set
294# CONFIG_SYN_COOKIES is not set
295# CONFIG_INET_AH is not set
296# CONFIG_INET_ESP is not set
297# CONFIG_INET_IPCOMP is not set
298# CONFIG_INET_XFRM_TUNNEL is not set
299CONFIG_INET_TUNNEL=m
300CONFIG_INET_XFRM_MODE_TRANSPORT=m
301CONFIG_INET_XFRM_MODE_TUNNEL=m
302CONFIG_INET_XFRM_MODE_BEET=m
303CONFIG_INET_DIAG=y
304CONFIG_INET_TCP_DIAG=y
305# CONFIG_TCP_CONG_ADVANCED is not set
306CONFIG_TCP_CONG_CUBIC=y
307CONFIG_DEFAULT_TCP_CONG="cubic"
308CONFIG_IPV6=m
309CONFIG_IPV6_PRIVACY=y
310CONFIG_IPV6_ROUTER_PREF=y
311CONFIG_INET6_AH=m
312CONFIG_INET6_ESP=m
313CONFIG_INET6_IPCOMP=m
314CONFIG_INET6_XFRM_TUNNEL=m
315CONFIG_INET6_TUNNEL=m
316CONFIG_INET6_XFRM_MODE_TRANSPORT=m
317CONFIG_INET6_XFRM_MODE_TUNNEL=m
318CONFIG_INET6_XFRM_MODE_BEET=m
319CONFIG_IPV6_SIT=m
320CONFIG_IPV6_TUNNEL=m
321CONFIG_NETWORK_SECMARK=y
322# CONFIG_NETFILTER is not set
323# CONFIG_BRIDGE is not set
324# CONFIG_VLAN_8021Q is not set
325# CONFIG_DECNET is not set
326# CONFIG_LLC2 is not set
327# CONFIG_IPX is not set
328# CONFIG_ATALK is not set
329
330#
331# QoS and/or fair queueing
332#
333# CONFIG_NET_SCHED is not set
334
335#
336# Network testing
337#
338# CONFIG_NET_PKTGEN is not set
339# CONFIG_HAMRADIO is not set
340# CONFIG_IRDA is not set
341# CONFIG_BT is not set
342CONFIG_IEEE80211=m
343# CONFIG_IEEE80211_DEBUG is not set
344CONFIG_IEEE80211_CRYPT_WEP=m
345CONFIG_IEEE80211_CRYPT_CCMP=m
346
347#
348# Device Drivers
349#
350
351#
352# Generic Driver Options
353#
354CONFIG_STANDALONE=y
355CONFIG_PREVENT_FIRMWARE_BUILD=y
356CONFIG_FW_LOADER=m
357# CONFIG_SYS_HYPERVISOR is not set
358
359#
360# Connector - unified userspace <-> kernelspace linker
361#
362CONFIG_CONNECTOR=m
363
364#
365# Memory Technology Devices (MTD)
366#
367# CONFIG_MTD is not set
368
369#
370# Parallel port support
371#
372# CONFIG_PARPORT is not set
373
374#
375# Plug and Play support
376#
377# CONFIG_PNPACPI is not set
378
379#
380# Block devices
381#
382# CONFIG_BLK_CPQ_DA is not set
383# CONFIG_BLK_CPQ_CISS_DA is not set
384# CONFIG_BLK_DEV_DAC960 is not set
385# CONFIG_BLK_DEV_COW_COMMON is not set
386# CONFIG_BLK_DEV_LOOP is not set
387# CONFIG_BLK_DEV_NBD is not set
388# CONFIG_BLK_DEV_SX8 is not set
389# CONFIG_BLK_DEV_RAM is not set
390# CONFIG_BLK_DEV_INITRD is not set
391CONFIG_CDROM_PKTCDVD=m
392CONFIG_CDROM_PKTCDVD_BUFFERS=8
393CONFIG_ATA_OVER_ETH=m
394
395#
396# Misc devices
397#
398CONFIG_SGI_IOC4=m
399
400#
401# ATA/ATAPI/MFM/RLL support
402#
403# CONFIG_IDE is not set
404
405#
406# SCSI device support
407#
408CONFIG_RAID_ATTRS=m
409# CONFIG_SCSI is not set
410# CONFIG_SCSI_NETLINK is not set
411
412#
413# Serial ATA (prod) and Parallel ATA (experimental) drivers
414#
415# CONFIG_ATA is not set
416
417#
418# Multi-device support (RAID and LVM)
419#
420# CONFIG_MD is not set
421
422#
423# Fusion MPT device support
424#
425# CONFIG_FUSION is not set
426
427#
428# IEEE 1394 (FireWire) support
429#
430# CONFIG_IEEE1394 is not set
431
432#
433# I2O device support
434#
435# CONFIG_I2O is not set
436
437#
438# Network device support
439#
440CONFIG_NETDEVICES=y
441# CONFIG_DUMMY is not set
442# CONFIG_BONDING is not set
443# CONFIG_EQUALIZER is not set
444# CONFIG_TUN is not set
445
446#
447# ARCnet devices
448#
449# CONFIG_ARCNET is not set
450
451#
452# PHY device support
453#
454CONFIG_PHYLIB=m
455
456#
457# MII PHY device drivers
458#
459CONFIG_MARVELL_PHY=m
460CONFIG_DAVICOM_PHY=m
461CONFIG_QSEMI_PHY=m
462CONFIG_LXT_PHY=m
463CONFIG_CICADA_PHY=m
464CONFIG_VITESSE_PHY=m
465CONFIG_SMSC_PHY=m
466# CONFIG_BROADCOM_PHY is not set
467# CONFIG_FIXED_PHY is not set
468
469#
470# Ethernet (10 or 100Mbit)
471#
472CONFIG_NET_ETHERNET=y
473CONFIG_MII=y
474# CONFIG_HAPPYMEAL is not set
475# CONFIG_SUNGEM is not set
476# CONFIG_CASSINI is not set
477# CONFIG_NET_VENDOR_3COM is not set
478# CONFIG_DM9000 is not set
479
480#
481# Tulip family network device support
482#
483# CONFIG_NET_TULIP is not set
484# CONFIG_HP100 is not set
485CONFIG_NET_PCI=y
486# CONFIG_PCNET32 is not set
487# CONFIG_AMD8111_ETH is not set
488# CONFIG_ADAPTEC_STARFIRE is not set
489# CONFIG_B44 is not set
490# CONFIG_FORCEDETH is not set
491# CONFIG_DGRS is not set
492CONFIG_EEPRO100=y
493# CONFIG_E100 is not set
494# CONFIG_FEALNX is not set
495# CONFIG_NATSEMI is not set
496# CONFIG_NE2K_PCI is not set
497# CONFIG_8139TOO is not set
498# CONFIG_SIS900 is not set
499# CONFIG_EPIC100 is not set
500# CONFIG_SUNDANCE is not set
501# CONFIG_TLAN is not set
502# CONFIG_VIA_RHINE is not set
503
504#
505# Ethernet (1000 Mbit)
506#
507# CONFIG_ACENIC is not set
508# CONFIG_DL2K is not set
509# CONFIG_E1000 is not set
510# CONFIG_NS83820 is not set
511# CONFIG_HAMACHI is not set
512# CONFIG_R8169 is not set
513# CONFIG_SIS190 is not set
514# CONFIG_SKGE is not set
515# CONFIG_SKY2 is not set
516# CONFIG_SK98LIN is not set
517# CONFIG_VIA_VELOCITY is not set
518# CONFIG_TIGON3 is not set
519# CONFIG_BNX2 is not set
520CONFIG_MV643XX_ETH=y
521CONFIG_QLA3XXX=m
522
523#
524# Ethernet (10000 Mbit)
525#
526# CONFIG_CHELSIO_T1 is not set
527CONFIG_CHELSIO_T3=m
528# CONFIG_IXGB is not set
529# CONFIG_S2IO is not set
530# CONFIG_MYRI10GE is not set
531CONFIG_NETXEN_NIC=m
532
533#
534# Token Ring devices
535#
536# CONFIG_TR is not set
537
538#
539# Wireless LAN (non-hamradio)
540#
541# CONFIG_NET_RADIO is not set
542
543#
544# Wan interfaces
545#
546# CONFIG_WAN is not set
547# CONFIG_FDDI is not set
548# CONFIG_PPP is not set
549# CONFIG_SLIP is not set
550# CONFIG_NETPOLL is not set
551# CONFIG_NET_POLL_CONTROLLER is not set
552
553#
554# ISDN subsystem
555#
556# CONFIG_ISDN is not set
557
558#
559# Telephony Support
560#
561# CONFIG_PHONE is not set
562
563#
564# Input device support
565#
566# CONFIG_INPUT is not set
567
568#
569# Hardware I/O ports
570#
571# CONFIG_SERIO is not set
572# CONFIG_GAMEPORT is not set
573
574#
575# Character devices
576#
577# CONFIG_VT is not set
578# CONFIG_SERIAL_NONSTANDARD is not set
579
580#
581# Serial drivers
582#
583CONFIG_SERIAL_8250=y
584CONFIG_SERIAL_8250_CONSOLE=y
585CONFIG_SERIAL_8250_PCI=y
586CONFIG_SERIAL_8250_NR_UARTS=4
587CONFIG_SERIAL_8250_RUNTIME_UARTS=4
588# CONFIG_SERIAL_8250_EXTENDED is not set
589
590#
591# Non-8250 serial port support
592#
593CONFIG_SERIAL_CORE=y
594CONFIG_SERIAL_CORE_CONSOLE=y
595# CONFIG_SERIAL_JSM is not set
596CONFIG_UNIX98_PTYS=y
597CONFIG_LEGACY_PTYS=y
598CONFIG_LEGACY_PTY_COUNT=256
599
600#
601# IPMI
602#
603# CONFIG_IPMI_HANDLER is not set
604
605#
606# Watchdog Cards
607#
608# CONFIG_WATCHDOG is not set
609# CONFIG_HW_RANDOM is not set
610# CONFIG_RTC is not set
611# CONFIG_GEN_RTC is not set
612# CONFIG_DTLK is not set
613# CONFIG_R3964 is not set
614# CONFIG_APPLICOM is not set
615# CONFIG_DRM is not set
616# CONFIG_RAW_DRIVER is not set
617
618#
619# TPM devices
620#
621
622#
623# I2C support
624#
625# CONFIG_I2C is not set
626
627#
628# SPI support
629#
630# CONFIG_SPI is not set
631# CONFIG_SPI_MASTER is not set
632
633#
634# Dallas's 1-wire bus
635#
636# CONFIG_W1 is not set
637
638#
639# Hardware Monitoring support
640#
641# CONFIG_HWMON is not set
642# CONFIG_HWMON_VID is not set
643
644#
645# Multimedia devices
646#
647# CONFIG_VIDEO_DEV is not set
648
649#
650# Digital Video Broadcasting Devices
651#
652# CONFIG_DVB is not set
653
654#
655# Graphics support
656#
657# CONFIG_FIRMWARE_EDID is not set
658# CONFIG_FB is not set
659# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
660
661#
662# Sound
663#
664# CONFIG_SOUND is not set
665
666#
667# USB support
668#
669CONFIG_USB_ARCH_HAS_HCD=y
670CONFIG_USB_ARCH_HAS_OHCI=y
671CONFIG_USB_ARCH_HAS_EHCI=y
672# CONFIG_USB is not set
673
674#
675# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
676#
677
678#
679# USB Gadget Support
680#
681# CONFIG_USB_GADGET is not set
682
683#
684# MMC/SD Card support
685#
686# CONFIG_MMC is not set
687
688#
689# LED devices
690#
691# CONFIG_NEW_LEDS is not set
692
693#
694# LED drivers
695#
696
697#
698# LED Triggers
699#
700
701#
702# InfiniBand support
703#
704# CONFIG_INFINIBAND is not set
705
706#
707# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
708#
709
710#
711# Real Time Clock
712#
713
714#
715# DMA Engine support
716#
717# CONFIG_DMA_ENGINE is not set
718
719#
720# DMA Clients
721#
722
723#
724# DMA Devices
725#
726
727#
728# Auxiliary Display support
729#
730
731#
732# Virtualization
733#
734
735#
736# File systems
737#
738# CONFIG_EXT2_FS is not set
739# CONFIG_EXT3_FS is not set
740# CONFIG_REISERFS_FS is not set
741# CONFIG_JFS_FS is not set
742CONFIG_FS_POSIX_ACL=y
743# CONFIG_XFS_FS is not set
744# CONFIG_OCFS2_FS is not set
745# CONFIG_MINIX_FS is not set
746# CONFIG_ROMFS_FS is not set
747CONFIG_INOTIFY=y
748CONFIG_INOTIFY_USER=y
749# CONFIG_QUOTA is not set
750CONFIG_DNOTIFY=y
751# CONFIG_AUTOFS_FS is not set
752# CONFIG_AUTOFS4_FS is not set
753CONFIG_FUSE_FS=m
754CONFIG_GENERIC_ACL=y
755
756#
757# CD-ROM/DVD Filesystems
758#
759# CONFIG_ISO9660_FS is not set
760# CONFIG_UDF_FS is not set
761
762#
763# DOS/FAT/NT Filesystems
764#
765# CONFIG_MSDOS_FS is not set
766# CONFIG_VFAT_FS is not set
767# CONFIG_NTFS_FS is not set
768
769#
770# Pseudo filesystems
771#
772CONFIG_PROC_FS=y
773CONFIG_PROC_KCORE=y
774CONFIG_PROC_SYSCTL=y
775CONFIG_SYSFS=y
776CONFIG_TMPFS=y
777CONFIG_TMPFS_POSIX_ACL=y
778# CONFIG_HUGETLB_PAGE is not set
779CONFIG_RAMFS=y
780
781#
782# Miscellaneous filesystems
783#
784# CONFIG_HFSPLUS_FS is not set
785# CONFIG_CRAMFS is not set
786# CONFIG_VXFS_FS is not set
787# CONFIG_HPFS_FS is not set
788# CONFIG_QNX4FS_FS is not set
789# CONFIG_SYSV_FS is not set
790# CONFIG_UFS_FS is not set
791
792#
793# Network File Systems
794#
795CONFIG_NFS_FS=y
796# CONFIG_NFS_V3 is not set
797# CONFIG_NFS_DIRECTIO is not set
798# CONFIG_NFSD is not set
799CONFIG_ROOT_NFS=y
800CONFIG_LOCKD=y
801CONFIG_NFS_COMMON=y
802CONFIG_SUNRPC=y
803# CONFIG_SMB_FS is not set
804# CONFIG_CIFS is not set
805# CONFIG_NCP_FS is not set
806# CONFIG_CODA_FS is not set
807
808#
809# Partition Types
810#
811# CONFIG_PARTITION_ADVANCED is not set
812CONFIG_MSDOS_PARTITION=y
813
814#
815# Native Language Support
816#
817# CONFIG_NLS is not set
818
819#
820# Kernel hacking
821#
822CONFIG_TRACE_IRQFLAGS_SUPPORT=y
823# CONFIG_PRINTK_TIME is not set
824CONFIG_ENABLE_MUST_CHECK=y
825# CONFIG_MAGIC_SYSRQ is not set
826# CONFIG_UNUSED_SYMBOLS is not set
827# CONFIG_DEBUG_FS is not set
828# CONFIG_HEADERS_CHECK is not set
829# CONFIG_DEBUG_KERNEL is not set
830CONFIG_LOG_BUF_SHIFT=14
831CONFIG_CROSSCOMPILE=y
832CONFIG_CMDLINE=""
833CONFIG_SYS_SUPPORTS_KGDB=y
834
835#
836# Security options
837#
838CONFIG_KEYS=y
839CONFIG_KEYS_DEBUG_PROC_KEYS=y
840# CONFIG_SECURITY is not set
841
842#
843# Cryptographic options
844#
845CONFIG_CRYPTO=y
846CONFIG_CRYPTO_ALGAPI=y
847CONFIG_CRYPTO_BLKCIPHER=m
848CONFIG_CRYPTO_HASH=y
849CONFIG_CRYPTO_MANAGER=y
850CONFIG_CRYPTO_HMAC=y
851CONFIG_CRYPTO_NULL=m
852CONFIG_CRYPTO_MD4=m
853CONFIG_CRYPTO_MD5=m
854CONFIG_CRYPTO_SHA1=m
855CONFIG_CRYPTO_SHA256=m
856CONFIG_CRYPTO_SHA512=m
857CONFIG_CRYPTO_WP512=m
858CONFIG_CRYPTO_TGR192=m
859CONFIG_CRYPTO_ECB=m
860CONFIG_CRYPTO_CBC=m
861CONFIG_CRYPTO_PCBC=m
862CONFIG_CRYPTO_DES=m
863CONFIG_CRYPTO_FCRYPT=m
864CONFIG_CRYPTO_BLOWFISH=m
865CONFIG_CRYPTO_TWOFISH=m
866CONFIG_CRYPTO_TWOFISH_COMMON=m
867CONFIG_CRYPTO_SERPENT=m
868CONFIG_CRYPTO_AES=m
869CONFIG_CRYPTO_CAST5=m
870CONFIG_CRYPTO_CAST6=m
871CONFIG_CRYPTO_TEA=m
872CONFIG_CRYPTO_ARC4=m
873CONFIG_CRYPTO_KHAZAD=m
874CONFIG_CRYPTO_ANUBIS=m
875CONFIG_CRYPTO_DEFLATE=m
876CONFIG_CRYPTO_MICHAEL_MIC=m
877CONFIG_CRYPTO_CRC32C=m
878CONFIG_CRYPTO_CAMELLIA=m
879# CONFIG_CRYPTO_TEST is not set
880
881#
882# Hardware crypto devices
883#
884
885#
886# Library routines
887#
888CONFIG_BITREVERSE=m
889# CONFIG_CRC_CCITT is not set
890CONFIG_CRC16=m
891CONFIG_CRC32=m
892CONFIG_LIBCRC32C=m
893CONFIG_ZLIB_INFLATE=m
894CONFIG_ZLIB_DEFLATE=m
895CONFIG_PLIST=y
896CONFIG_HAS_IOMEM=y
897CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/momentum/Kconfig b/arch/mips/momentum/Kconfig
deleted file mode 100644
index 70a61cf7174d..000000000000
--- a/arch/mips/momentum/Kconfig
+++ /dev/null
@@ -1,6 +0,0 @@
1config JAGUAR_DMALOW
2 bool "Low DMA Mode"
3 depends on MOMENCO_JAGUAR_ATX
4 help
5 Select to Y if jump JP5 is set on your board, N otherwise. Normally
6 the jumper is set, so if you feel unsafe, just say Y.
diff --git a/arch/mips/momentum/jaguar_atx/Makefile b/arch/mips/momentum/jaguar_atx/Makefile
deleted file mode 100644
index 2e8cebd49bc0..000000000000
--- a/arch/mips/momentum/jaguar_atx/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
1#
2# Makefile for Momentum Computer's Jaguar-ATX board.
3#
4# Note! Dependencies are done automagically by 'make dep', which also
5# removes any old dependencies. DON'T put your own dependencies here
6# unless it's something special (ie not a .c file).
7#
8
9obj-y += irq.o platform.o prom.o reset.o setup.o
10
11obj-$(CONFIG_SERIAL_8250_CONSOLE) += ja-console.o
12obj-$(CONFIG_REMOTE_DEBUG) += dbg_io.o
diff --git a/arch/mips/momentum/jaguar_atx/dbg_io.c b/arch/mips/momentum/jaguar_atx/dbg_io.c
deleted file mode 100644
index b85a6521f72d..000000000000
--- a/arch/mips/momentum/jaguar_atx/dbg_io.c
+++ /dev/null
@@ -1,125 +0,0 @@
1
2#if defined(CONFIG_REMOTE_DEBUG)
3
4#include <asm/serial.h> /* For the serial port location and base baud */
5
6/* --- CONFIG --- */
7
8typedef unsigned char uint8;
9typedef unsigned int uint32;
10
11/* --- END OF CONFIG --- */
12
13#define UART16550_BAUD_2400 2400
14#define UART16550_BAUD_4800 4800
15#define UART16550_BAUD_9600 9600
16#define UART16550_BAUD_19200 19200
17#define UART16550_BAUD_38400 38400
18#define UART16550_BAUD_57600 57600
19#define UART16550_BAUD_115200 115200
20
21#define UART16550_PARITY_NONE 0
22#define UART16550_PARITY_ODD 0x08
23#define UART16550_PARITY_EVEN 0x18
24#define UART16550_PARITY_MARK 0x28
25#define UART16550_PARITY_SPACE 0x38
26
27#define UART16550_DATA_5BIT 0x0
28#define UART16550_DATA_6BIT 0x1
29#define UART16550_DATA_7BIT 0x2
30#define UART16550_DATA_8BIT 0x3
31
32#define UART16550_STOP_1BIT 0x0
33#define UART16550_STOP_2BIT 0x4
34
35/* ----------------------------------------------------- */
36
37/* === CONFIG === */
38
39/* [jsun] we use the second serial port for kdb */
40#define BASE OCELOT_SERIAL1_BASE
41#define MAX_BAUD OCELOT_BASE_BAUD
42
43/* === END OF CONFIG === */
44
45#define REG_OFFSET 4
46
47/* register offset */
48#define OFS_RCV_BUFFER 0
49#define OFS_TRANS_HOLD 0
50#define OFS_SEND_BUFFER 0
51#define OFS_INTR_ENABLE (1*REG_OFFSET)
52#define OFS_INTR_ID (2*REG_OFFSET)
53#define OFS_DATA_FORMAT (3*REG_OFFSET)
54#define OFS_LINE_CONTROL (3*REG_OFFSET)
55#define OFS_MODEM_CONTROL (4*REG_OFFSET)
56#define OFS_RS232_OUTPUT (4*REG_OFFSET)
57#define OFS_LINE_STATUS (5*REG_OFFSET)
58#define OFS_MODEM_STATUS (6*REG_OFFSET)
59#define OFS_RS232_INPUT (6*REG_OFFSET)
60#define OFS_SCRATCH_PAD (7*REG_OFFSET)
61
62#define OFS_DIVISOR_LSB (0*REG_OFFSET)
63#define OFS_DIVISOR_MSB (1*REG_OFFSET)
64
65
66/* memory-mapped read/write of the port */
67#define UART16550_READ(y) (*((volatile uint8*)(BASE + y)))
68#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z)
69
70void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
71{
72 /* disable interrupts */
73 UART16550_WRITE(OFS_INTR_ENABLE, 0);
74
75 /* set up baud rate */
76 {
77 uint32 divisor;
78
79 /* set DIAB bit */
80 UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
81
82 /* set divisor */
83 divisor = MAX_BAUD / baud;
84 UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
85 UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
86
87 /* clear DIAB bit */
88 UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
89 }
90
91 /* set data format */
92 UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
93}
94
95static int remoteDebugInitialized = 0;
96
97uint8 getDebugChar(void)
98{
99 if (!remoteDebugInitialized) {
100 remoteDebugInitialized = 1;
101 debugInit(UART16550_BAUD_38400,
102 UART16550_DATA_8BIT,
103 UART16550_PARITY_NONE, UART16550_STOP_1BIT);
104 }
105
106 while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
107 return UART16550_READ(OFS_RCV_BUFFER);
108}
109
110
111int putDebugChar(uint8 byte)
112{
113 if (!remoteDebugInitialized) {
114 remoteDebugInitialized = 1;
115 debugInit(UART16550_BAUD_38400,
116 UART16550_DATA_8BIT,
117 UART16550_PARITY_NONE, UART16550_STOP_1BIT);
118 }
119
120 while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
121 UART16550_WRITE(OFS_SEND_BUFFER, byte);
122 return 1;
123}
124
125#endif
diff --git a/arch/mips/momentum/jaguar_atx/irq.c b/arch/mips/momentum/jaguar_atx/irq.c
deleted file mode 100644
index f2b432585df2..000000000000
--- a/arch/mips/momentum/jaguar_atx/irq.c
+++ /dev/null
@@ -1,94 +0,0 @@
1/*
2 * Copyright (C) 2002 Momentum Computer, Inc.
3 * Author: Matthew Dharm, mdharm@momenco.com
4 *
5 * Based on work by:
6 * Copyright (C) 2000 RidgeRun, Inc.
7 * Author: RidgeRun, Inc.
8 * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
9 *
10 * Copyright 2001 MontaVista Software Inc.
11 * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
12 *
13 * Copyright (C) 2000, 01, 06 Ralf Baechle (ralf@linux-mips.org)
14 *
15 * This program is free software; you can redistribute it and/or modify it
16 * under the terms of the GNU General Public License as published by the
17 * Free Software Foundation; either version 2 of the License, or (at your
18 * option) any later version.
19 *
20 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
21 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
22 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
23 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
25 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
26 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
27 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
28 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
29 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 *
31 * You should have received a copy of the GNU General Public License along
32 * with this program; if not, write to the Free Software Foundation, Inc.,
33 * 675 Mass Ave, Cambridge, MA 02139, USA.
34 */
35#include <linux/init.h>
36#include <linux/interrupt.h>
37#include <linux/signal.h>
38#include <linux/types.h>
39#include <asm/irq_cpu.h>
40#include <asm/mipsregs.h>
41#include <asm/time.h>
42
43asmlinkage void plat_irq_dispatch(void)
44{
45 unsigned int pending = read_c0_cause() & read_c0_status();
46
47 if (pending & STATUSF_IP0)
48 do_IRQ(0);
49 else if (pending & STATUSF_IP1)
50 do_IRQ(1);
51 else if (pending & STATUSF_IP2)
52 do_IRQ(2);
53 else if (pending & STATUSF_IP3)
54 do_IRQ(3);
55 else if (pending & STATUSF_IP4)
56 do_IRQ(4);
57 else if (pending & STATUSF_IP5)
58 do_IRQ(5);
59 else if (pending & STATUSF_IP6)
60 do_IRQ(6);
61 else if (pending & STATUSF_IP7)
62 ll_timer_interrupt(7);
63 else {
64 /*
65 * Now look at the extended interrupts
66 */
67 pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16;
68 if (pending & STATUSF_IP8)
69 ll_mv64340_irq();
70 }
71}
72
73static struct irqaction cascade_mv64340 = {
74 no_action, IRQF_DISABLED, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL
75};
76
77void __init arch_init_irq(void)
78{
79 /*
80 * Clear all of the interrupts while we change the able around a bit.
81 * int-handler is not on bootstrap
82 */
83 clear_c0_status(ST0_IM);
84
85 mips_cpu_irq_init();
86 rm7k_cpu_irq_init();
87
88 /* set up the cascading interrupts */
89 setup_irq(8, &cascade_mv64340);
90
91 mv64340_irq_init(16);
92
93 set_c0_status(ST0_IM);
94}
diff --git a/arch/mips/momentum/jaguar_atx/ja-console.c b/arch/mips/momentum/jaguar_atx/ja-console.c
deleted file mode 100644
index 2c30b4f56245..000000000000
--- a/arch/mips/momentum/jaguar_atx/ja-console.c
+++ /dev/null
@@ -1,101 +0,0 @@
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 2001, 2002, 2004 Ralf Baechle
7 */
8#include <linux/init.h>
9#include <linux/console.h>
10#include <linux/kdev_t.h>
11#include <linux/major.h>
12#include <linux/termios.h>
13#include <linux/sched.h>
14#include <linux/tty.h>
15
16#include <linux/serial.h>
17#include <linux/serial_core.h>
18#include <asm/serial.h>
19
20/* SUPERIO uart register map */
21struct ja_uartregs {
22 union {
23 volatile u8 pad0[3];
24 volatile u8 rbr; /* read only, DLAB == 0 */
25 volatile u8 pad1[3];
26 volatile u8 thr; /* write only, DLAB == 0 */
27 volatile u8 pad2[3];
28 volatile u8 dll; /* DLAB == 1 */
29 } u1;
30 union {
31 volatile u8 pad0[3];
32 volatile u8 ier; /* DLAB == 0 */
33 volatile u8 pad1[3];
34 volatile u8 dlm; /* DLAB == 1 */
35 } u2;
36 union {
37 volatile u8 pad0[3];
38 volatile u8 iir; /* read only */
39 volatile u8 pad1[3];
40 volatile u8 fcr; /* write only */
41 } u3;
42 volatile u8 pad0[3];
43 volatile u8 iu_lcr;
44 volatile u8 pad1[3];
45 volatile u8 iu_mcr;
46 volatile u8 pad2[3];
47 volatile u8 iu_lsr;
48 volatile u8 pad3[3];
49 volatile u8 iu_msr;
50 volatile u8 pad4[3];
51 volatile u8 iu_scr;
52} ja_uregs_t;
53
54#define iu_rbr u1.rbr
55#define iu_thr u1.thr
56#define iu_dll u1.dll
57#define iu_ier u2.ier
58#define iu_dlm u2.dlm
59#define iu_iir u3.iir
60#define iu_fcr u3.fcr
61
62extern unsigned long uart_base;
63
64static inline struct ja_uartregs *console_uart(void)
65{
66 return (struct ja_uartregs *) (uart_base + 0x23UL);
67}
68
69void prom_putchar(char c)
70{
71 struct ja_uartregs *uart = console_uart();
72
73 while ((uart->iu_lsr & 0x20) == 0);
74 uart->iu_thr = c;
75}
76
77static void inline ja_console_probe(void)
78{
79 struct uart_port up;
80
81 /*
82 * Register to interrupt zero because we share the interrupt with
83 * the serial driver which we don't properly support yet.
84 */
85 memset(&up, 0, sizeof(up));
86 up.membase = (unsigned char *) uart_base + 0x23UL;
87 up.irq = JAGUAR_ATX_SERIAL1_IRQ;
88 up.uartclk = JAGUAR_ATX_UART_CLK;
89 up.regshift = 2;
90 up.iotype = UPIO_MEM;
91 up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
92 up.line = 0;
93
94 if (early_serial_setup(&up))
95 printk(KERN_ERR "Early serial init of port 0 failed\n");
96}
97
98__init void ja_setup_console(void)
99{
100 ja_console_probe();
101}
diff --git a/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h b/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h
deleted file mode 100644
index 022f6974b76e..000000000000
--- a/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h
+++ /dev/null
@@ -1,54 +0,0 @@
1/*
2 * Jaguar-ATX Board Register Definitions
3 *
4 * (C) 2002 Momentum Computer Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 *
11 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
12 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
13 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
14 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
15 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
16 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
17 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
18 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
19 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
20 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
21 *
22 * You should have received a copy of the GNU General Public License along
23 * with this program; if not, write to the Free Software Foundation, Inc.,
24 * 675 Mass Ave, Cambridge, MA 02139, USA.
25 */
26#ifndef __JAGUAR_ATX_FPGA_H__
27#define __JAGUAR_ATX_FPGA_H__
28
29#define JAGUAR_ATX_REG_BOARDREV 0x0
30#define JAGUAR_ATX_REG_FPGA_REV 0x1
31#define JAGUAR_ATX_REG_FPGA_TYPE 0x2
32#define JAGUAR_ATX_REG_RESET_STATUS 0x3
33#define JAGUAR_ATX_REG_BOARD_STATUS 0x4
34#define JAGUAR_ATX_REG_RESERVED1 0x5
35#define JAGUAR_ATX_REG_SET 0x6
36#define JAGUAR_ATX_REG_CLR 0x7
37#define JAGUAR_ATX_REG_EEPROM_MODE 0x9
38#define JAGUAR_ATX_REG_RESERVED2 0xa
39#define JAGUAR_ATX_REG_RESERVED3 0xb
40#define JAGUAR_ATX_REG_RESERVED4 0xc
41#define JAGUAR_ATX_REG_PHY_INTSTAT 0xd
42#define JAGUAR_ATX_REG_RESERVED5 0xe
43#define JAGUAR_ATX_REG_RESERVED6 0xf
44
45#define JAGUAR_ATX_CS0_ADDR 0xfc000000L
46
47extern unsigned long ja_fpga_base;
48
49#define __FPGA_REG_TO_ADDR(reg) \
50 ((void *) ja_fpga_base + JAGUAR_ATX_REG_##reg)
51#define JAGUAR_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg))
52#define JAGUAR_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg))
53
54#endif
diff --git a/arch/mips/momentum/jaguar_atx/platform.c b/arch/mips/momentum/jaguar_atx/platform.c
deleted file mode 100644
index 561844878a90..000000000000
--- a/arch/mips/momentum/jaguar_atx/platform.c
+++ /dev/null
@@ -1,208 +0,0 @@
1#include <linux/delay.h>
2#include <linux/if_ether.h>
3#include <linux/ioport.h>
4#include <linux/mv643xx.h>
5#include <linux/platform_device.h>
6
7#include "jaguar_atx_fpga.h"
8
9#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
10
11static struct resource mv643xx_eth_shared_resources[] = {
12 [0] = {
13 .name = "ethernet shared base",
14 .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS,
15 .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS +
16 MV643XX_ETH_SHARED_REGS_SIZE - 1,
17 .flags = IORESOURCE_MEM,
18 },
19};
20
21static struct platform_device mv643xx_eth_shared_device = {
22 .name = MV643XX_ETH_SHARED_NAME,
23 .id = 0,
24 .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources),
25 .resource = mv643xx_eth_shared_resources,
26};
27
28#define MV_SRAM_BASE 0xfe000000UL
29#define MV_SRAM_SIZE (256 * 1024)
30
31#define MV_SRAM_RXRING_SIZE (MV_SRAM_SIZE / 4)
32#define MV_SRAM_TXRING_SIZE (MV_SRAM_SIZE / 4)
33
34#define MV_SRAM_BASE_ETH0 MV_SRAM_BASE
35#define MV_SRAM_BASE_ETH1 (MV_SRAM_BASE + (MV_SRAM_SIZE / 2))
36
37#define MV64x60_IRQ_ETH_0 48
38#define MV64x60_IRQ_ETH_1 49
39#define MV64x60_IRQ_ETH_2 50
40
41static struct resource mv64x60_eth0_resources[] = {
42 [0] = {
43 .name = "eth0 irq",
44 .start = MV64x60_IRQ_ETH_0,
45 .end = MV64x60_IRQ_ETH_0,
46 .flags = IORESOURCE_IRQ,
47 },
48};
49
50static struct mv643xx_eth_platform_data eth0_pd = {
51 .port_number = 0,
52
53 .tx_sram_addr = MV_SRAM_BASE_ETH0,
54 .tx_sram_size = MV_SRAM_TXRING_SIZE,
55 .tx_queue_size = MV_SRAM_TXRING_SIZE / 16,
56
57 .rx_sram_addr = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE,
58 .rx_sram_size = MV_SRAM_RXRING_SIZE,
59 .rx_queue_size = MV_SRAM_RXRING_SIZE / 16,
60};
61
62static struct platform_device eth0_device = {
63 .name = MV643XX_ETH_NAME,
64 .id = 0,
65 .num_resources = ARRAY_SIZE(mv64x60_eth0_resources),
66 .resource = mv64x60_eth0_resources,
67 .dev = {
68 .platform_data = &eth0_pd,
69 },
70};
71
72static struct resource mv64x60_eth1_resources[] = {
73 [0] = {
74 .name = "eth1 irq",
75 .start = MV64x60_IRQ_ETH_1,
76 .end = MV64x60_IRQ_ETH_1,
77 .flags = IORESOURCE_IRQ,
78 },
79};
80
81static struct mv643xx_eth_platform_data eth1_pd = {
82 .port_number = 1,
83
84 .tx_sram_addr = MV_SRAM_BASE_ETH1,
85 .tx_sram_size = MV_SRAM_TXRING_SIZE,
86 .tx_queue_size = MV_SRAM_TXRING_SIZE / 16,
87
88 .rx_sram_addr = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE,
89 .rx_sram_size = MV_SRAM_RXRING_SIZE,
90 .rx_queue_size = MV_SRAM_RXRING_SIZE / 16,
91};
92
93static struct platform_device eth1_device = {
94 .name = MV643XX_ETH_NAME,
95 .id = 1,
96 .num_resources = ARRAY_SIZE(mv64x60_eth1_resources),
97 .resource = mv64x60_eth1_resources,
98 .dev = {
99 .platform_data = &eth1_pd,
100 },
101};
102
103static struct resource mv64x60_eth2_resources[] = {
104 [0] = {
105 .name = "eth2 irq",
106 .start = MV64x60_IRQ_ETH_2,
107 .end = MV64x60_IRQ_ETH_2,
108 .flags = IORESOURCE_IRQ,
109 },
110};
111
112static struct mv643xx_eth_platform_data eth2_pd = {
113 .port_number = 2,
114};
115
116static struct platform_device eth2_device = {
117 .name = MV643XX_ETH_NAME,
118 .id = 2,
119 .num_resources = ARRAY_SIZE(mv64x60_eth2_resources),
120 .resource = mv64x60_eth2_resources,
121 .dev = {
122 .platform_data = &eth2_pd,
123 },
124};
125
126static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
127 &mv643xx_eth_shared_device,
128 &eth0_device,
129 &eth1_device,
130 &eth2_device,
131};
132
133static u8 __init exchange_bit(u8 val, u8 cs)
134{
135 /* place the data */
136 JAGUAR_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
137 udelay(1);
138
139 /* turn the clock on */
140 JAGUAR_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
141 udelay(1);
142
143 /* turn the clock off and read-strobe */
144 JAGUAR_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
145
146 /* return the data */
147 return (JAGUAR_FPGA_READ(EEPROM_MODE) >> 3) & 0x1;
148}
149
150static void __init get_mac(char dest[6])
151{
152 u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
153 int i,j;
154
155 for (i = 0; i < 12; i++)
156 exchange_bit(read_opcode[i], 1);
157
158 for (j = 0; j < 6; j++) {
159 dest[j] = 0;
160 for (i = 0; i < 8; i++) {
161 dest[j] <<= 1;
162 dest[j] |= exchange_bit(0, 1);
163 }
164 }
165
166 /* turn off CS */
167 exchange_bit(0,0);
168}
169
170/*
171 * Copy and increment ethernet MAC address by a small value.
172 *
173 * This is useful for systems where the only one MAC address is stored in
174 * non-volatile memory for multiple ports.
175 */
176static inline void eth_mac_add(unsigned char *dst, unsigned char *src,
177 unsigned int add)
178{
179 int i;
180
181 BUG_ON(add >= 256);
182
183 for (i = ETH_ALEN; i >= 0; i--) {
184 dst[i] = src[i] + add;
185 add = dst[i] < src[i]; /* compute carry */
186 }
187
188 WARN_ON(add);
189}
190
191static int __init mv643xx_eth_add_pds(void)
192{
193 unsigned char mac[ETH_ALEN];
194 int ret;
195
196 get_mac(mac);
197 eth_mac_add(eth0_pd.mac_addr, mac, 0);
198 eth_mac_add(eth1_pd.mac_addr, mac, 1);
199 eth_mac_add(eth2_pd.mac_addr, mac, 2);
200 ret = platform_add_devices(mv643xx_eth_pd_devs,
201 ARRAY_SIZE(mv643xx_eth_pd_devs));
202
203 return ret;
204}
205
206device_initcall(mv643xx_eth_add_pds);
207
208#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */
diff --git a/arch/mips/momentum/jaguar_atx/prom.c b/arch/mips/momentum/jaguar_atx/prom.c
deleted file mode 100644
index 5dd154ee58f6..000000000000
--- a/arch/mips/momentum/jaguar_atx/prom.c
+++ /dev/null
@@ -1,210 +0,0 @@
1/*
2 * Copyright 2002 Momentum Computer Inc.
3 * Author: Matthew Dharm <mdharm@momenco.com>
4 *
5 * Louis Hamilton, Red Hat, Inc.
6 * hamilton@redhat.com [MIPS64 modifications]
7 *
8 * Based on Ocelot Linux port, which is
9 * Copyright 2001 MontaVista Software Inc.
10 * Author: jsun@mvista.com or jsun@junsun.net
11 *
12 * This program is free software; you can redistribute it and/or modify it
13 * under the terms of the GNU General Public License as published by the
14 * Free Software Foundation; either version 2 of the License, or (at your
15 * option) any later version.
16 *
17 * Added changes for SMP - Manish Lachwani (lachwani@pmc-sierra.com)
18 */
19#include <linux/init.h>
20#include <linux/mm.h>
21#include <linux/sched.h>
22#include <linux/bootmem.h>
23#include <linux/mv643xx.h>
24
25#include <asm/addrspace.h>
26#include <asm/bootinfo.h>
27#include <asm/pmon.h>
28
29#include "jaguar_atx_fpga.h"
30
31extern void ja_setup_console(void);
32
33struct callvectors *debug_vectors;
34
35extern unsigned long cpu_clock;
36
37const char *get_system_type(void)
38{
39 return "Momentum Jaguar-ATX";
40}
41
42#ifdef CONFIG_64BIT
43
44unsigned long signext(unsigned long addr)
45{
46 addr &= 0xffffffff;
47 return (unsigned long)((int)addr);
48}
49
50void *get_arg(unsigned long args, int arc)
51{
52 unsigned long ul;
53 unsigned char *puc, uc;
54
55 args += (arc * 4);
56 ul = (unsigned long)signext(args);
57 puc = (unsigned char *)ul;
58 if (puc == 0)
59 return (void *)0;
60
61#ifdef CONFIG_CPU_LITTLE_ENDIAN
62 uc = *puc++;
63 l = (unsigned long)uc;
64 uc = *puc++;
65 ul |= (((unsigned long)uc) << 8);
66 uc = *puc++;
67 ul |= (((unsigned long)uc) << 16);
68 uc = *puc++;
69 ul |= (((unsigned long)uc) << 24);
70#else
71 uc = *puc++;
72 ul = ((unsigned long)uc) << 24;
73 uc = *puc++;
74 ul |= (((unsigned long)uc) << 16);
75 uc = *puc++;
76 ul |= (((unsigned long)uc) << 8);
77 uc = *puc++;
78 ul |= ((unsigned long)uc);
79#endif
80 ul = signext(ul);
81
82 return (void *)ul;
83}
84
85char *arg64(unsigned long addrin, int arg_index)
86{
87 unsigned long args;
88 char *p;
89
90 args = signext(addrin);
91 p = (char *)get_arg(args, arg_index);
92
93 return p;
94}
95#endif /* CONFIG_64BIT */
96
97/* PMON passes arguments in C main() style */
98void __init prom_init(void)
99{
100 int argc = fw_arg0;
101 char **arg = (char **) fw_arg1;
102 char **env = (char **) fw_arg2;
103 struct callvectors *cv = (struct callvectors *) fw_arg3;
104 int i;
105
106#ifdef CONFIG_SERIAL_8250_CONSOLE
107// ja_setup_console(); /* The very first thing. */
108#endif
109
110#ifdef CONFIG_64BIT
111 char *ptr;
112
113 printk("Mips64 Jaguar-ATX\n");
114 /* save the PROM vectors for debugging use */
115 debug_vectors = (struct callvectors *)signext((unsigned long)cv);
116
117 /* arg[0] is "g", the rest is boot parameters */
118 arcs_cmdline[0] = '\0';
119
120 for (i = 1; i < argc; i++) {
121 ptr = (char *)arg64((unsigned long)arg, i);
122 if ((strlen(arcs_cmdline) + strlen(ptr) + 1) >=
123 sizeof(arcs_cmdline))
124 break;
125 strcat(arcs_cmdline, ptr);
126 strcat(arcs_cmdline, " ");
127 }
128
129 i = 0;
130 while (1) {
131 ptr = (char *)arg64((unsigned long)env, i);
132 if (! ptr)
133 break;
134
135 if (strncmp("gtbase", ptr, strlen("gtbase")) == 0) {
136 marvell_base = simple_strtol(ptr + strlen("gtbase="),
137 NULL, 16);
138
139 if ((marvell_base & 0xffffffff00000000) == 0)
140 marvell_base |= 0xffffffff00000000;
141
142 printk("marvell_base set to 0x%016lx\n", marvell_base);
143 }
144 if (strncmp("cpuclock", ptr, strlen("cpuclock")) == 0) {
145 cpu_clock = simple_strtol(ptr + strlen("cpuclock="),
146 NULL, 10);
147 printk("cpu_clock set to %d\n", cpu_clock);
148 }
149 i++;
150 }
151 printk("arcs_cmdline: %s\n", arcs_cmdline);
152
153#else /* CONFIG_64BIT */
154 /* save the PROM vectors for debugging use */
155 debug_vectors = cv;
156
157 /* arg[0] is "g", the rest is boot parameters */
158 arcs_cmdline[0] = '\0';
159 for (i = 1; i < argc; i++) {
160 if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
161 >= sizeof(arcs_cmdline))
162 break;
163 strcat(arcs_cmdline, arg[i]);
164 strcat(arcs_cmdline, " ");
165 }
166
167 while (*env) {
168 if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
169 marvell_base = simple_strtol(*env + strlen("gtbase="),
170 NULL, 16);
171 }
172 if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0) {
173 cpu_clock = simple_strtol(*env + strlen("cpuclock="),
174 NULL, 10);
175 }
176 env++;
177 }
178#endif /* CONFIG_64BIT */
179 mips_machgroup = MACH_GROUP_MOMENCO;
180 mips_machtype = MACH_MOMENCO_JAGUAR_ATX;
181}
182
183void __init prom_free_prom_memory(void)
184{
185}
186
187void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
188{
189}
190
191int prom_boot_secondary(int cpu, unsigned long sp, unsigned long gp)
192{
193 /* Clear the semaphore */
194 *(volatile uint32_t *)(0xbb000a68) = 0x80000000;
195
196 return 1;
197}
198
199void prom_init_secondary(void)
200{
201 clear_c0_config(CONF_CM_CMASK);
202 set_c0_config(0x2);
203
204 clear_c0_status(ST0_IM);
205 set_c0_status(0x1ffff);
206}
207
208void prom_smp_finish(void)
209{
210}
diff --git a/arch/mips/momentum/jaguar_atx/reset.c b/arch/mips/momentum/jaguar_atx/reset.c
deleted file mode 100644
index c73b0897dc52..000000000000
--- a/arch/mips/momentum/jaguar_atx/reset.c
+++ /dev/null
@@ -1,56 +0,0 @@
1/*
2 * This program is free software; you can redistribute it and/or modify it
3 * under the terms of the GNU General Public License as published by the
4 * Free Software Foundation; either version 2 of the License, or (at your
5 * option) any later version.
6 *
7 * Copyright (C) 1997, 2001 Ralf Baechle
8 * Copyright 2001 MontaVista Software Inc.
9 * Author: jsun@mvista.com or jsun@junsun.net
10 *
11 * Copyright (C) 2002 Momentum Computer Inc.
12 * Author: Matthew Dharm <mdharm@momenco.com>
13 *
14 * Louis Hamilton, Red Hat, Inc.
15 * hamilton@redhat.com [MIPS64 modifications]
16 */
17#include <linux/sched.h>
18#include <linux/mm.h>
19#include <asm/io.h>
20#include <asm/pgtable.h>
21#include <asm/processor.h>
22#include <asm/reboot.h>
23#include <asm/system.h>
24#include <linux/delay.h>
25
26void momenco_jaguar_restart(char *command)
27{
28 /* base address of timekeeper portion of part */
29#ifdef CONFIG_64BIT
30 void *nvram = (void*) 0xfffffffffc807000;
31#else
32 void *nvram = (void*) 0xfc807000;
33#endif
34 /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */
35 writeb(0x84, nvram + 0xff7);
36
37 /* wait for the watchdog to go off */
38 mdelay(100+(1000/16));
39
40 /* if the watchdog fails for some reason, let people know */
41 printk(KERN_NOTICE "Watchdog reset failed\n");
42}
43
44void momenco_jaguar_halt(void)
45{
46 printk(KERN_NOTICE "\n** You can safely turn off the power\n");
47 while (1)
48 __asm__(".set\tmips3\n\t"
49 "wait\n\t"
50 ".set\tmips0");
51}
52
53void momenco_jaguar_power_off(void)
54{
55 momenco_jaguar_halt();
56}
diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c
deleted file mode 100644
index 5a510142b978..000000000000
--- a/arch/mips/momentum/jaguar_atx/setup.c
+++ /dev/null
@@ -1,475 +0,0 @@
1/*
2 * BRIEF MODULE DESCRIPTION
3 * Momentum Computer Jaguar-ATX board dependent boot routines
4 *
5 * Copyright (C) 1996, 1997, 2001, 04, 06 Ralf Baechle (ralf@linux-mips.org)
6 * Copyright (C) 2000 RidgeRun, Inc.
7 * Copyright (C) 2001 Red Hat, Inc.
8 * Copyright (C) 2002 Momentum Computer
9 *
10 * Author: Matthew Dharm, Momentum Computer
11 * mdharm@momenco.com
12 *
13 * Louis Hamilton, Red Hat, Inc.
14 * hamilton@redhat.com [MIPS64 modifications]
15 *
16 * Author: RidgeRun, Inc.
17 * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
18 *
19 * Copyright 2001 MontaVista Software Inc.
20 * Author: jsun@mvista.com or jsun@junsun.net
21 *
22 * This program is free software; you can redistribute it and/or modify it
23 * under the terms of the GNU General Public License as published by the
24 * Free Software Foundation; either version 2 of the License, or (at your
25 * option) any later version.
26 *
27 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
28 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
29 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
30 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
31 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
32 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
33 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
34 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
35 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
36 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
37 *
38 * You should have received a copy of the GNU General Public License along
39 * with this program; if not, write to the Free Software Foundation, Inc.,
40 * 675 Mass Ave, Cambridge, MA 02139, USA.
41 */
42#include <linux/bcd.h>
43#include <linux/init.h>
44#include <linux/kernel.h>
45#include <linux/types.h>
46#include <linux/mm.h>
47#include <linux/bootmem.h>
48#include <linux/module.h>
49#include <linux/pci.h>
50#include <linux/swap.h>
51#include <linux/ioport.h>
52#include <linux/pm.h>
53#include <linux/sched.h>
54#include <linux/interrupt.h>
55#include <linux/timex.h>
56#include <linux/vmalloc.h>
57#include <linux/mv643xx.h>
58
59#include <asm/time.h>
60#include <asm/bootinfo.h>
61#include <asm/page.h>
62#include <asm/io.h>
63#include <asm/irq.h>
64#include <asm/processor.h>
65#include <asm/reboot.h>
66#include <asm/tlbflush.h>
67
68#include "jaguar_atx_fpga.h"
69
70extern unsigned long mv64340_sram_base;
71unsigned long cpu_clock;
72
73/* These functions are used for rebooting or halting the machine*/
74extern void momenco_jaguar_restart(char *command);
75extern void momenco_jaguar_halt(void);
76extern void momenco_jaguar_power_off(void);
77
78void momenco_time_init(void);
79
80static char reset_reason;
81
82static inline unsigned long ENTRYLO(unsigned long paddr)
83{
84 return ((paddr & PAGE_MASK) |
85 (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL |
86 _CACHE_UNCACHED)) >> 6;
87}
88
89void __init bus_error_init(void) { /* nothing */ }
90
91/*
92 * Load a few TLB entries for the MV64340 and perhiperals. The MV64340 is going
93 * to be hit on every IRQ anyway - there's absolutely no point in letting it be
94 * a random TLB entry, as it'll just cause needless churning of the TLB. And we
95 * use the other half for the serial port, which is just a PITA otherwise :)
96 *
97 * Device Physical Virtual
98 * MV64340 Internal Regs 0xf4000000 0xf4000000
99 * Ocelot-C[S] PLD (CS0) 0xfc000000 0xfc000000
100 * NVRAM (CS1) 0xfc800000 0xfc800000
101 * UARTs (CS2) 0xfd000000 0xfd000000
102 * Internal SRAM 0xfe000000 0xfe000000
103 * M-Systems DOC (CS3) 0xff000000 0xff000000
104 */
105
106static __init void wire_stupidity_into_tlb(void)
107{
108#ifdef CONFIG_32BIT
109 write_c0_wired(0);
110 local_flush_tlb_all();
111
112 /* marvell and extra space */
113 add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000),
114 0xf4000000UL, PM_64K);
115 /* fpga, rtc, and uart */
116 add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000),
117 0xfc000000UL, PM_16M);
118// /* m-sys and internal SRAM */
119// add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000),
120// 0xfe000000UL, PM_16M);
121
122 marvell_base = 0xf4000000;
123 //mv64340_sram_base = 0xfe000000; /* Currently unused */
124#endif
125}
126
127unsigned long marvell_base = 0xf4000000L;
128unsigned long ja_fpga_base = JAGUAR_ATX_CS0_ADDR;
129unsigned long uart_base = 0xfd000000L;
130static unsigned char *rtc_base = (unsigned char*) 0xfc800000L;
131
132EXPORT_SYMBOL(marvell_base);
133
134static __init int per_cpu_mappings(void)
135{
136 marvell_base = (unsigned long) ioremap(0xf4000000, 0x10000);
137 ja_fpga_base = (unsigned long) ioremap(JAGUAR_ATX_CS0_ADDR, 0x1000);
138 uart_base = (unsigned long) ioremap(0xfd000000UL, 0x1000);
139 rtc_base = ioremap(0xfc000000UL, 0x8000);
140 // ioremap(0xfe000000, 32 << 20);
141 write_c0_wired(0);
142 local_flush_tlb_all();
143 ja_setup_console();
144
145 return 0;
146}
147arch_initcall(per_cpu_mappings);
148
149unsigned long m48t37y_get_time(void)
150{
151 unsigned int year, month, day, hour, min, sec;
152 unsigned long flags;
153
154 spin_lock_irqsave(&rtc_lock, flags);
155 /* stop the update */
156 rtc_base[0x7ff8] = 0x40;
157
158 year = BCD2BIN(rtc_base[0x7fff]);
159 year += BCD2BIN(rtc_base[0x7ff1]) * 100;
160
161 month = BCD2BIN(rtc_base[0x7ffe]);
162
163 day = BCD2BIN(rtc_base[0x7ffd]);
164
165 hour = BCD2BIN(rtc_base[0x7ffb]);
166 min = BCD2BIN(rtc_base[0x7ffa]);
167 sec = BCD2BIN(rtc_base[0x7ff9]);
168
169 /* start the update */
170 rtc_base[0x7ff8] = 0x00;
171 spin_unlock_irqrestore(&rtc_lock, flags);
172
173 return mktime(year, month, day, hour, min, sec);
174}
175
176int m48t37y_set_time(unsigned long sec)
177{
178 struct rtc_time tm;
179 unsigned long flags;
180
181 /* convert to a more useful format -- note months count from 0 */
182 to_tm(sec, &tm);
183 tm.tm_mon += 1;
184
185 spin_lock_irqsave(&rtc_lock, flags);
186 /* enable writing */
187 rtc_base[0x7ff8] = 0x80;
188
189 /* year */
190 rtc_base[0x7fff] = BIN2BCD(tm.tm_year % 100);
191 rtc_base[0x7ff1] = BIN2BCD(tm.tm_year / 100);
192
193 /* month */
194 rtc_base[0x7ffe] = BIN2BCD(tm.tm_mon);
195
196 /* day */
197 rtc_base[0x7ffd] = BIN2BCD(tm.tm_mday);
198
199 /* hour/min/sec */
200 rtc_base[0x7ffb] = BIN2BCD(tm.tm_hour);
201 rtc_base[0x7ffa] = BIN2BCD(tm.tm_min);
202 rtc_base[0x7ff9] = BIN2BCD(tm.tm_sec);
203
204 /* day of week -- not really used, but let's keep it up-to-date */
205 rtc_base[0x7ffc] = BIN2BCD(tm.tm_wday + 1);
206
207 /* disable writing */
208 rtc_base[0x7ff8] = 0x00;
209 spin_unlock_irqrestore(&rtc_lock, flags);
210
211 return 0;
212}
213
214void __init plat_timer_setup(struct irqaction *irq)
215{
216 setup_irq(8, irq);
217}
218
219/*
220 * Ugly but the least of all evils. TLB initialization did flush the TLB so
221 * We need to setup mappings again before we can touch the RTC.
222 */
223void momenco_time_init(void)
224{
225 wire_stupidity_into_tlb();
226
227 mips_hpt_frequency = cpu_clock / 2;
228
229 rtc_mips_get_time = m48t37y_get_time;
230 rtc_mips_set_time = m48t37y_set_time;
231}
232
233static struct resource mv_pci_io_mem0_resource = {
234 .name = "MV64340 PCI0 IO MEM",
235 .flags = IORESOURCE_IO
236};
237
238static struct resource mv_pci_mem0_resource = {
239 .name = "MV64340 PCI0 MEM",
240 .flags = IORESOURCE_MEM
241};
242
243static struct mv_pci_controller mv_bus0_controller = {
244 .pcic = {
245 .pci_ops = &mv_pci_ops,
246 .mem_resource = &mv_pci_mem0_resource,
247 .io_resource = &mv_pci_io_mem0_resource,
248 },
249 .config_addr = MV64340_PCI_0_CONFIG_ADDR,
250 .config_vreg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG,
251};
252
253static uint32_t mv_io_base, mv_io_size;
254
255static void ja_pci0_init(void)
256{
257 uint32_t mem0_base, mem0_size;
258 uint32_t io_base, io_size;
259
260 io_base = MV_READ(MV64340_PCI_0_IO_BASE_ADDR) << 16;
261 io_size = (MV_READ(MV64340_PCI_0_IO_SIZE) + 1) << 16;
262 mem0_base = MV_READ(MV64340_PCI_0_MEMORY0_BASE_ADDR) << 16;
263 mem0_size = (MV_READ(MV64340_PCI_0_MEMORY0_SIZE) + 1) << 16;
264
265 mv_pci_io_mem0_resource.start = 0;
266 mv_pci_io_mem0_resource.end = io_size - 1;
267 mv_pci_mem0_resource.start = mem0_base;
268 mv_pci_mem0_resource.end = mem0_base + mem0_size - 1;
269 mv_bus0_controller.pcic.mem_offset = mem0_base;
270 mv_bus0_controller.pcic.io_offset = 0;
271
272 ioport_resource.end = io_size - 1;
273
274 register_pci_controller(&mv_bus0_controller.pcic);
275
276 mv_io_base = io_base;
277 mv_io_size = io_size;
278}
279
280static struct resource mv_pci_io_mem1_resource = {
281 .name = "MV64340 PCI1 IO MEM",
282 .flags = IORESOURCE_IO
283};
284
285static struct resource mv_pci_mem1_resource = {
286 .name = "MV64340 PCI1 MEM",
287 .flags = IORESOURCE_MEM
288};
289
290static struct mv_pci_controller mv_bus1_controller = {
291 .pcic = {
292 .pci_ops = &mv_pci_ops,
293 .mem_resource = &mv_pci_mem1_resource,
294 .io_resource = &mv_pci_io_mem1_resource,
295 },
296 .config_addr = MV64340_PCI_1_CONFIG_ADDR,
297 .config_vreg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG,
298};
299
300static __init void ja_pci1_init(void)
301{
302 uint32_t mem0_base, mem0_size;
303 uint32_t io_base, io_size;
304
305 io_base = MV_READ(MV64340_PCI_1_IO_BASE_ADDR) << 16;
306 io_size = (MV_READ(MV64340_PCI_1_IO_SIZE) + 1) << 16;
307 mem0_base = MV_READ(MV64340_PCI_1_MEMORY0_BASE_ADDR) << 16;
308 mem0_size = (MV_READ(MV64340_PCI_1_MEMORY0_SIZE) + 1) << 16;
309
310 /*
311 * Here we assume the I/O window of second bus to be contiguous with
312 * the first. A gap is no problem but would waste address space for
313 * remapping the port space.
314 */
315 mv_pci_io_mem1_resource.start = mv_io_size;
316 mv_pci_io_mem1_resource.end = mv_io_size + io_size - 1;
317 mv_pci_mem1_resource.start = mem0_base;
318 mv_pci_mem1_resource.end = mem0_base + mem0_size - 1;
319 mv_bus1_controller.pcic.mem_offset = mem0_base;
320 mv_bus1_controller.pcic.io_offset = 0;
321
322 ioport_resource.end = io_base + io_size -mv_io_base - 1;
323
324 register_pci_controller(&mv_bus1_controller.pcic);
325
326 mv_io_size = io_base + io_size - mv_io_base;
327}
328
329static __init int __init ja_pci_init(void)
330{
331 unsigned long io_v_base;
332 uint32_t enable;
333
334 enable = ~MV_READ(MV64340_BASE_ADDR_ENABLE);
335
336 /*
337 * We require at least one enabled I/O or PCI memory window or we
338 * will ignore this PCI bus. We ignore PCI windows 1, 2 and 3.
339 */
340 if (enable & (0x01 << 9) || enable & (0x01 << 10))
341 ja_pci0_init();
342
343 if (enable & (0x01 << 14) || enable & (0x01 << 15))
344 ja_pci1_init();
345
346 if (mv_io_size) {
347 io_v_base = (unsigned long) ioremap(mv_io_base, mv_io_size);
348 if (!io_v_base)
349 panic("Could not ioremap I/O port range");
350
351 set_io_port_base(io_v_base);
352 }
353
354 return 0;
355}
356
357arch_initcall(ja_pci_init);
358
359void __init plat_mem_setup(void)
360{
361 unsigned int tmpword;
362
363 board_time_init = momenco_time_init;
364
365 _machine_restart = momenco_jaguar_restart;
366 _machine_halt = momenco_jaguar_halt;
367 pm_power_off = momenco_jaguar_power_off;
368
369 /*
370 * initrd_start = (unsigned long)jaguar_initrd_start;
371 * initrd_end = (unsigned long)jaguar_initrd_start + (ulong)jaguar_initrd_size;
372 * initrd_below_start_ok = 1;
373 */
374
375 wire_stupidity_into_tlb();
376
377 /*
378 * shut down ethernet ports, just to be sure our memory doesn't get
379 * corrupted by random ethernet traffic.
380 */
381 MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
382 MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
383 MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(2), 0xff << 8);
384 MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
385 MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
386 MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0xff << 8);
387 while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
388 while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
389 while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(2)) & 0xff);
390 while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
391 while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
392 while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(2)) & 0xff);
393 MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0),
394 MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
395 MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1),
396 MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
397 MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(2),
398 MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(2)) & ~1);
399
400 /* Turn off the Bit-Error LED */
401 JAGUAR_FPGA_WRITE(0x80, CLR);
402
403 tmpword = JAGUAR_FPGA_READ(BOARDREV);
404 if (tmpword < 26)
405 printk("Momentum Jaguar-ATX: Board Assembly Rev. %c\n",
406 'A'+tmpword);
407 else
408 printk("Momentum Jaguar-ATX: Board Assembly Revision #0x%x\n",
409 tmpword);
410
411 tmpword = JAGUAR_FPGA_READ(FPGA_REV);
412 printk("FPGA Rev: %d.%d\n", tmpword>>4, tmpword&15);
413 tmpword = JAGUAR_FPGA_READ(RESET_STATUS);
414 printk("Reset reason: 0x%x\n", tmpword);
415 switch (tmpword) {
416 case 0x1:
417 printk(" - Power-up reset\n");
418 break;
419 case 0x2:
420 printk(" - Push-button reset\n");
421 break;
422 case 0x8:
423 printk(" - Watchdog reset\n");
424 break;
425 case 0x10:
426 printk(" - JTAG reset\n");
427 break;
428 default:
429 printk(" - Unknown reset cause\n");
430 }
431 reset_reason = tmpword;
432 JAGUAR_FPGA_WRITE(0xff, RESET_STATUS);
433
434 tmpword = JAGUAR_FPGA_READ(BOARD_STATUS);
435 printk("Board Status register: 0x%02x\n", tmpword);
436 printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
437 printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
438
439 /* 256MiB of RM9000x2 DDR */
440// add_memory_region(0x0, 0x100<<20, BOOT_MEM_RAM);
441
442 /* 128MiB of MV-64340 DDR */
443// add_memory_region(0x100<<20, 0x80<<20, BOOT_MEM_RAM);
444
445 /* XXX Memory configuration should be picked up from PMON2k */
446#ifdef CONFIG_JAGUAR_DMALOW
447 printk("Jaguar ATX DMA-low mode set\n");
448 add_memory_region(0x00000000, 0x08000000, BOOT_MEM_RAM);
449 add_memory_region(0x08000000, 0x10000000, BOOT_MEM_RAM);
450#else
451 /* 128MiB of MV-64340 DDR RAM */
452 printk("Jaguar ATX DMA-low mode is not set\n");
453 add_memory_region(0x100<<20, 0x80<<20, BOOT_MEM_RAM);
454#endif
455
456#ifdef GEMDEBUG_TRACEBUFFER
457 {
458 unsigned int tbControl;
459 tbControl =
460 0 << 26 | /* post trigger delay 0 */
461 0x2 << 16 | /* sequential trace mode */
462 // 0x0 << 16 | /* non-sequential trace mode */
463 // 0xf << 4 | /* watchpoints disabled */
464 2 << 2 | /* armed */
465 2 ; /* interrupt disabled */
466 printk ("setting tbControl = %08lx\n", tbControl);
467 write_32bit_cp0_set1_register($22, tbControl);
468 __asm__ __volatile__(".set noreorder\n\t" \
469 "nop; nop; nop; nop; nop; nop;\n\t" \
470 "nop; nop; nop; nop; nop; nop;\n\t" \
471 ".set reorder\n\t");
472
473 }
474#endif
475}
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 30a1c79c6f5f..aba3dbf47eda 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -30,7 +30,6 @@ obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
30obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o 30obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
31obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o 31obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
32obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o 32obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o
33obj-$(CONFIG_MOMENCO_JAGUAR_ATX)+= fixup-jaguar.o
34obj-$(CONFIG_MOMENCO_OCELOT) += fixup-ocelot.o pci-ocelot.o 33obj-$(CONFIG_MOMENCO_OCELOT) += fixup-ocelot.o pci-ocelot.o
35obj-$(CONFIG_MOMENCO_OCELOT_3) += fixup-ocelot3.o 34obj-$(CONFIG_MOMENCO_OCELOT_3) += fixup-ocelot3.o
36obj-$(CONFIG_MOMENCO_OCELOT_C) += fixup-ocelot-c.o pci-ocelot-c.o 35obj-$(CONFIG_MOMENCO_OCELOT_C) += fixup-ocelot-c.o pci-ocelot-c.o
diff --git a/arch/mips/pci/fixup-jaguar.c b/arch/mips/pci/fixup-jaguar.c
deleted file mode 100644
index 6c5e1d47179c..000000000000
--- a/arch/mips/pci/fixup-jaguar.c
+++ /dev/null
@@ -1,43 +0,0 @@
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Marvell MV64340 interrupt fixup code.
7 *
8 * Marvell wants an NDA for their docs so this was written without
9 * documentation. You've been warned.
10 *
11 * Copyright (C) 2004 Ralf Baechle (ralf@linux-mips.org)
12 */
13#include <linux/kernel.h>
14#include <linux/init.h>
15#include <linux/pci.h>
16
17#include <asm/mipsregs.h>
18
19/*
20 * WARNING: Example of how _NOT_ to do it.
21 */
22int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
23{
24 int bus = dev->bus->number;
25
26 if (bus == 0 && slot == 1)
27 return 3; /* PCI-X A */
28 if (bus == 0 && slot == 2)
29 return 4; /* PCI-X B */
30 if (bus == 1 && slot == 1)
31 return 5; /* PCI A */
32 if (bus == 1 && slot == 2)
33 return 6; /* PCI B */
34
35return 0;
36 panic("Whooops in pcibios_map_irq");
37}
38
39/* Do platform specific device initialization at pci_enable_device() time */
40int pcibios_plat_dev_init(struct pci_dev *dev)
41{
42 return 0;
43}
diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h
index 198ecc08ab40..b0c329783ac5 100644
--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
@@ -121,7 +121,7 @@
121#define MACH_MOMENCO_OCELOT 0 121#define MACH_MOMENCO_OCELOT 0
122#define MACH_MOMENCO_OCELOT_G 1 /* no more supported (may 2007) */ 122#define MACH_MOMENCO_OCELOT_G 1 /* no more supported (may 2007) */
123#define MACH_MOMENCO_OCELOT_C 2 123#define MACH_MOMENCO_OCELOT_C 2
124#define MACH_MOMENCO_JAGUAR_ATX 3 124#define MACH_MOMENCO_JAGUAR_ATX 3 /* no more supported (may 2007) */
125#define MACH_MOMENCO_OCELOT_3 4 125#define MACH_MOMENCO_OCELOT_3 4
126 126
127/* 127/*
diff --git a/include/asm-mips/mach-ja/cpu-feature-overrides.h b/include/asm-mips/mach-ja/cpu-feature-overrides.h
deleted file mode 100644
index 84b6dead0e8a..000000000000
--- a/include/asm-mips/mach-ja/cpu-feature-overrides.h
+++ /dev/null
@@ -1,45 +0,0 @@
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 2003, 2004 Ralf Baechle
7 */
8#ifndef __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H
9#define __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H
10
11/*
12 * Momentum Jaguar ATX always has the RM9000 processor.
13 */
14#define cpu_has_watch 1
15#define cpu_has_mips16 0
16#define cpu_has_divec 0
17#define cpu_has_vce 0
18#define cpu_has_cache_cdex_p 0
19#define cpu_has_cache_cdex_s 0
20#define cpu_has_prefetch 1
21#define cpu_has_mcheck 0
22#define cpu_has_ejtag 0
23
24#define cpu_has_llsc 1
25#define cpu_has_vtag_icache 0
26#define cpu_has_dc_aliases 0
27#define cpu_has_ic_fills_f_dc 0
28#define cpu_has_dsp 0
29#define cpu_icache_snoops_remote_store 0
30
31#define cpu_has_nofpuex 0
32#define cpu_has_64bits 1
33
34#define cpu_has_inclusive_pcaches 0
35
36#define cpu_dcache_line_size() 32
37#define cpu_icache_line_size() 32
38#define cpu_scache_line_size() 32
39
40#define cpu_has_mips32r1 0
41#define cpu_has_mips32r2 0
42#define cpu_has_mips64r1 0
43#define cpu_has_mips64r2 0
44
45#endif /* __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-ja/spaces.h b/include/asm-mips/mach-ja/spaces.h
deleted file mode 100644
index 8466a0e69c79..000000000000
--- a/include/asm-mips/mach-ja/spaces.h
+++ /dev/null
@@ -1,20 +0,0 @@
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
7 * Copyright (C) 2000, 2002 Maciej W. Rozycki
8 * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
9 */
10#ifndef __ASM_MACH_JA_SPACES_H
11#define __ASM_MACH_JA_SPACES_H
12
13/*
14 * Memory above this physical address will be considered highmem.
15 */
16#define HIGHMEM_START 0x08000000UL
17
18#include_next <spaces.h>
19
20#endif /* __ASM_MACH_JA_SPACES_H */
diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h
index 5e0da6e2d698..ce51213d84f9 100644
--- a/include/asm-mips/serial.h
+++ b/include/asm-mips/serial.h
@@ -81,25 +81,6 @@
81#define STD_SERIAL_PORT_DEFNS 81#define STD_SERIAL_PORT_DEFNS
82#endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */ 82#endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
83 83
84#ifdef CONFIG_MOMENCO_JAGUAR_ATX
85/* Ordinary NS16552 duart with a 20MHz crystal. */
86#define JAGUAR_ATX_UART_CLK 20000000
87#define JAGUAR_ATX_BASE_BAUD (JAGUAR_ATX_UART_CLK / 16)
88
89#define JAGUAR_ATX_SERIAL1_IRQ 6
90#define JAGUAR_ATX_SERIAL1_BASE 0xfd000023L
91
92#define _JAGUAR_ATX_SERIAL_INIT(int, base) \
93 { .baud_base = JAGUAR_ATX_BASE_BAUD, irq: int, \
94 .flags = (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
95 .iomem_base = (u8 *) base, iomem_reg_shift: 2, \
96 io_type: SERIAL_IO_MEM }
97#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS \
98 _JAGUAR_ATX_SERIAL_INIT(JAGUAR_ATX_SERIAL1_IRQ, JAGUAR_ATX_SERIAL1_BASE)
99#else
100#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS
101#endif
102
103#ifdef CONFIG_MOMENCO_OCELOT_3 84#ifdef CONFIG_MOMENCO_OCELOT_3
104#define OCELOT_3_BASE_BAUD ( 20000000 / 16 ) 85#define OCELOT_3_BASE_BAUD ( 20000000 / 16 )
105#define OCELOT_3_SERIAL_IRQ 6 86#define OCELOT_3_SERIAL_IRQ 6
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-30 17:55:23 -0500