Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6

9 files changed, 115 insertions, 70 deletions

diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c
index 36a9c42df835..76f4c7bad8b8 100644
--- a/drivers/net/wireless/b43/leds.c
+++ b/drivers/net/wireless/b43/leds.c
@@ -72,6 +72,9 @@ static void b43_led_brightness_set(struct led_classdev *led_dev,
         struct b43_wldev *dev = led->dev;
         bool radio_enabled;
 
+        if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED))
+                return;
+
         /* Checking the radio-enabled status here is slightly racy,
          * but we want to avoid the locking overhead and we don't care
          * whether the LED has the wrong state for a second. */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index fa4b0d8b74a2..a70827793086 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2883,12 +2883,11 @@ static int b43_op_tx(struct ieee80211_hw *hw,
 
         if (unlikely(skb->len < 2 + 2 + 6)) {
                 /* Too short, this can't be a valid frame. */
-                dev_kfree_skb_any(skb);
-                return NETDEV_TX_OK;
+                goto drop_packet;
         }
         B43_WARN_ON(skb_shinfo(skb)->nr_frags);
         if (unlikely(!dev))
-                return NETDEV_TX_BUSY;
+                goto drop_packet;
 
         /* Transmissions on seperate queues can run concurrently. */
         read_lock_irqsave(&wl->tx_lock, flags);
@@ -2904,7 +2903,12 @@ static int b43_op_tx(struct ieee80211_hw *hw,
         read_unlock_irqrestore(&wl->tx_lock, flags);
 
         if (unlikely(err))
-                return NETDEV_TX_BUSY;
+                goto drop_packet;
+        return NETDEV_TX_OK;
+
+drop_packet:
+        /* We can not transmit this packet. Drop it. */
+        dev_kfree_skb_any(skb);
         return NETDEV_TX_OK;
 }
 
diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c
index c990f87b107a..93ddc1cbcc8b 100644
--- a/drivers/net/wireless/b43legacy/dma.c
+++ b/drivers/net/wireless/b43legacy/dma.c
@@ -876,6 +876,7 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev,
         if (!ring)
                 goto out;
         ring->type = type;
+        ring->dev = dev;
 
         nr_slots = B43legacy_RXRING_SLOTS;
         if (for_tx)
@@ -922,7 +923,6 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev,
                                  DMA_TO_DEVICE);
         }
 
-        ring->dev = dev;
         ring->nr_slots = nr_slots;
         ring->mmio_base = b43legacy_dmacontroller_base(type, controller_index);
         ring->index = controller_index;
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 204077c13870..3e612d0a13e8 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2378,8 +2378,10 @@ static int b43legacy_op_tx(struct ieee80211_hw *hw,
         } else
                 err = b43legacy_dma_tx(dev, skb, ctl);
 out:
-        if (unlikely(err))
-                return NETDEV_TX_BUSY;
+        if (unlikely(err)) {
+                /* Drop the packet. */
+                dev_kfree_skb_any(skb);
+        }
         return NETDEV_TX_OK;
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 13925b627e3b..b1b3c523185d 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -2227,7 +2227,10 @@ static int iwl3945_scan_initiate(struct iwl3945_priv *priv)
         }
 
         IWL_DEBUG_INFO("Starting scan...\n");
-        priv->scan_bands = 2;
+        if (priv->cfg->sku & IWL_SKU_G)
+                priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
+        if (priv->cfg->sku & IWL_SKU_A)
+                priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
         set_bit(STATUS_SCANNING, &priv->status);
         priv->scan_start = jiffies;
         priv->scan_pass_start = priv->scan_start;
@@ -3352,13 +3355,18 @@ static void iwl3945_rx_scan_complete_notif(struct iwl3945_priv *priv,
         cancel_delayed_work(&priv->scan_check);
 
         IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
-                       (priv->scan_bands == 2) ? "2.4" : "5.2",
+                       (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
+                                                        "2.4" : "5.2",
                        jiffies_to_msecs(elapsed_jiffies
                                         (priv->scan_pass_start, jiffies)));
 
-        /* Remove this scanned band from the list
-         * of pending bands to scan */
-        priv->scan_bands--;
+        /* Remove this scanned band from the list of pending
+         * bands to scan, band G precedes A in order of scanning
+         * as seen in iwl3945_bg_request_scan */
+        if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ))
+                priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ);
+        else if (priv->scan_bands &  BIT(IEEE80211_BAND_5GHZ))
+                priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ);
 
         /* If a request to abort was given, or the scan did not succeed
          * then we reset the scan state machine and terminate,
@@ -4972,7 +4980,7 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv,
 
                 ch_info = iwl3945_get_channel_info(priv, band, scan_ch->channel);
                 if (!is_channel_valid(ch_info)) {
-                        IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
+                        IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
                                        scan_ch->channel);
                         continue;
                 }
@@ -6315,21 +6323,16 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 
         /* flags + rate selection */
 
-        switch (priv->scan_bands) {
-        case 2:
+        if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
                 scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
                 scan->tx_cmd.rate = IWL_RATE_1M_PLCP;
                 scan->good_CRC_th = 0;
                 band = IEEE80211_BAND_2GHZ;
-                break;
-
-        case 1:
+        } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
                 scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
                 scan->good_CRC_th = IWL_GOOD_CRC_TH;
                 band = IEEE80211_BAND_5GHZ;
-                break;
-
-        default:
+        } else {
                 IWL_WARNING("Invalid scan band count\n");
                 goto done;
         }
@@ -6770,7 +6773,7 @@ static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co
         ch_info = iwl3945_get_channel_info(priv, conf->channel->band,
                                            conf->channel->hw_value);
         if (!is_channel_valid(ch_info)) {
-                IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this SKU.\n",
+                IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this band.\n",
                                conf->channel->hw_value, conf->channel->band);
                 IWL_DEBUG_MAC80211("leave - invalid channel\n");
                 spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index 883b42f7e998..5ed16ce78468 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -1774,7 +1774,10 @@ static int iwl4965_scan_initiate(struct iwl_priv *priv)
         }
 
         IWL_DEBUG_INFO("Starting scan...\n");
-        priv->scan_bands = 2;
+        if (priv->cfg->sku & IWL_SKU_G)
+                priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
+        if (priv->cfg->sku & IWL_SKU_A)
+                priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
         set_bit(STATUS_SCANNING, &priv->status);
         priv->scan_start = jiffies;
         priv->scan_pass_start = priv->scan_start;
@@ -3023,8 +3026,9 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
 
         IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index);
         if (index != -1) {
-                int freed = iwl4965_tx_queue_reclaim(priv, txq_id, index);
 #ifdef CONFIG_IWL4965_HT
+                int freed = iwl4965_tx_queue_reclaim(priv, txq_id, index);
+
                 if (tid != MAX_TID_COUNT)
                         priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
                 if (iwl4965_queue_space(&txq->q) > txq->q.low_mark &&
@@ -3276,13 +3280,18 @@ static void iwl4965_rx_scan_complete_notif(struct iwl_priv *priv,
         cancel_delayed_work(&priv->scan_check);
 
         IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
-                       (priv->scan_bands == 2) ? "2.4" : "5.2",
+                       (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
+                                                "2.4" : "5.2",
                        jiffies_to_msecs(elapsed_jiffies
                                         (priv->scan_pass_start, jiffies)));
 
-        /* Remove this scanned band from the list
-         * of pending bands to scan */
-        priv->scan_bands--;
+        /* Remove this scanned band from the list of pending
+         * bands to scan, band G precedes A in order of scanning
+         * as seen in iwl_bg_request_scan */
+        if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ))
+                priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ);
+        else if (priv->scan_bands &  BIT(IEEE80211_BAND_5GHZ))
+                priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ);
 
         /* If a request to abort was given, or the scan did not succeed
          * then we reset the scan state machine and terminate,
@@ -3292,7 +3301,7 @@ static void iwl4965_rx_scan_complete_notif(struct iwl_priv *priv,
                 clear_bit(STATUS_SCAN_ABORTING, &priv->status);
         } else {
                 /* If there are more bands on this scan pass reschedule */
-                if (priv->scan_bands > 0)
+                if (priv->scan_bands)
                         goto reschedule;
         }
 
@@ -4635,10 +4644,9 @@ static int iwl4965_get_channels_for_scan(struct iwl_priv *priv,
 
                 scan_ch->channel = ieee80211_frequency_to_channel(channels[i].center_freq);
 
-                ch_info = iwl_get_channel_info(priv, band,
-                                         scan_ch->channel);
+                ch_info = iwl_get_channel_info(priv, band, scan_ch->channel);
                 if (!is_channel_valid(ch_info)) {
-                        IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
+                        IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
                                        scan_ch->channel);
                         continue;
                 }
@@ -5830,8 +5838,7 @@ static void iwl4965_bg_request_scan(struct work_struct *data)
         scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
 
 
-        switch (priv->scan_bands) {
-        case 2:
+        if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
                 scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
                 scan->tx_cmd.rate_n_flags =
                                 iwl4965_hw_set_rate_n_flags(IWL_RATE_1M_PLCP,
@@ -5839,17 +5846,13 @@ static void iwl4965_bg_request_scan(struct work_struct *data)
 
                 scan->good_CRC_th = 0;
                 band = IEEE80211_BAND_2GHZ;
-                break;
-
-        case 1:
+        } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
                 scan->tx_cmd.rate_n_flags =
                                 iwl4965_hw_set_rate_n_flags(IWL_RATE_6M_PLCP,
                                 RATE_MCS_ANT_B_MSK);
                 scan->good_CRC_th = IWL_GOOD_CRC_TH;
                 band = IEEE80211_BAND_5GHZ;
-                break;
-
-        default:
+        } else {
                 IWL_WARNING("Invalid scan band count\n");
                 goto done;
         }
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index fdbd0ef2be4b..61e59c17a60a 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -138,11 +138,8 @@ static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev,
          * Wait until the BBP becomes ready.
          */
         reg = rt2500usb_bbp_check(rt2x00dev);
-        if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
-                ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n");
-                mutex_unlock(&rt2x00dev->usb_cache_mutex);
-                return;
-        }
+        if (rt2x00_get_field16(reg, PHY_CSR8_BUSY))
+                goto exit_fail;
 
         /*
          * Write the data into the BBP.
@@ -155,6 +152,13 @@ static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev,
         rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
 
         mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+        return;
+
+exit_fail:
+        mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+        ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n");
 }
 
 static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
@@ -168,10 +172,8 @@ static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
          * Wait until the BBP becomes ready.
          */
         reg = rt2500usb_bbp_check(rt2x00dev);
-        if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
-                ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
-                return;
-        }
+        if (rt2x00_get_field16(reg, PHY_CSR8_BUSY))
+                goto exit_fail;
 
         /*
          * Write the request into the BBP.
@@ -186,17 +188,21 @@ static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
          * Wait until the BBP becomes ready.
          */
         reg = rt2500usb_bbp_check(rt2x00dev);
-        if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
-                ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
-                *value = 0xff;
-                mutex_unlock(&rt2x00dev->usb_cache_mutex);
-                return;
-        }
+        if (rt2x00_get_field16(reg, PHY_CSR8_BUSY))
+                goto exit_fail;
 
         rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, &reg);
         *value = rt2x00_get_field16(reg, PHY_CSR7_DATA);
 
         mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+        return;
+
+exit_fail:
+        mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+        ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
+        *value = 0xff;
 }
 
 static void rt2500usb_rf_write(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index fff8386e816b..83cc0147f698 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -134,11 +134,8 @@ static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev,
          * Wait until the BBP becomes ready.
          */
         reg = rt73usb_bbp_check(rt2x00dev);
-        if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
-                ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
-                mutex_unlock(&rt2x00dev->usb_cache_mutex);
-                return;
-        }
+        if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
+                goto exit_fail;
 
         /*
          * Write the data into the BBP.
@@ -151,6 +148,13 @@ static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 
         rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg);
         mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+        return;
+
+exit_fail:
+        mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+        ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
 }
 
 static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
@@ -164,11 +168,8 @@ static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
          * Wait until the BBP becomes ready.
          */
         reg = rt73usb_bbp_check(rt2x00dev);
-        if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
-                ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
-                mutex_unlock(&rt2x00dev->usb_cache_mutex);
-                return;
-        }
+        if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
+                goto exit_fail;
 
         /*
          * Write the request into the BBP.
@@ -184,14 +185,19 @@ static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
          * Wait until the BBP becomes ready.
          */
         reg = rt73usb_bbp_check(rt2x00dev);
-        if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
-                ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
-                *value = 0xff;
-                return;
-        }
+        if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
+                goto exit_fail;
 
         *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
         mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+        return;
+
+exit_fail:
+        mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+        ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
+        *value = 0xff;
 }
 
 static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev,
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 185488da2466..855bff4b3250 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -80,6 +80,23 @@ static const struct ieee80211_channel_range ieee80211_JP_channels[] = {
                                      IEEE80211_CHAN_RADAR),
 };
 
+static const struct ieee80211_channel_range ieee80211_EU_channels[] = {
+        /* IEEE 802.11b/g, channels 1..13 */
+        RANGE_PWR(2412, 2472, 20, 6, 0),
+        /* IEEE 802.11a, channel 36*/
+        RANGE_PWR(5180, 5180, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN),
+        /* IEEE 802.11a, channel 40*/
+        RANGE_PWR(5200, 5200, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN),
+        /* IEEE 802.11a, channel 44*/
+        RANGE_PWR(5220, 5220, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN),
+        /* IEEE 802.11a, channels 48..64 */
+        RANGE_PWR(5240, 5320, 23, 6, IEEE80211_CHAN_NO_IBSS |
+                                     IEEE80211_CHAN_RADAR),
+        /* IEEE 802.11a, channels 100..140 */
+        RANGE_PWR(5500, 5700, 30, 6, IEEE80211_CHAN_NO_IBSS |
+                                     IEEE80211_CHAN_RADAR),
+};
+
 #define REGDOM(_code)                                                   \
         {                                                               \
                 .code = __stringify(_code),                             \
@@ -90,6 +107,7 @@ static const struct ieee80211_channel_range ieee80211_JP_channels[] = {
 static const struct ieee80211_regdomain ieee80211_regdoms[] = {
         REGDOM(US),
         REGDOM(JP),
+        REGDOM(EU),
 };