mmc: dw_mmc: k3: remove clk_table

Remove clk_table and directly use ios->clock as clock source rate.
Abstract init clock rate and max clock limitation in clk.c

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <chris@printf.net>

2 files changed, 2 insertions, 53 deletions

diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
index d7e2d7f159bb..b8653ea97957 100644
--- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
@@ -14,18 +14,6 @@ Required Properties:
 * compatible: should be one of the following.
   - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extentions.
 
-* clock-freq-table: should be the frequency (in Hz) array of the ciu clock
-        in each supported mode.
-        0. CIU clock rate in Hz for DS mode
-        1. CIU clock rate in Hz for MMC HS mode
-        2. CIU clock rate in Hz for SD HS mode
-        3. CIU clock rate in Hz for SDR12 mode
-        4. CIU clock rate in Hz for SDR25 mode
-        5. CIU clock rate in Hz for SDR50 mode
-        6. CIU clock rate in Hz for SDR104 mode
-        7. CIU clock rate in Hz for DDR50 mode
-        8. CIU clock rate in Hz for HS200 mode
-
 Example:
 
         /* for Hi3620 */
@@ -39,8 +27,6 @@ Example:
                 #size-cells = <0>;
                 clocks = <&mmc_clock HI3620_SD_CIUCLK>, <&clock HI3620_DDRC_PER_CLK>;
                 clock-names = "ciu", "biu";
-                clock-freq-table =
-                <25000000 0 50000000 25000000 50000000 100000000 0 50000000>;
         };
 
         /* Board portion */
diff --git a/drivers/mmc/host/dw_mmc-k3.c b/drivers/mmc/host/dw_mmc-k3.c
index 3542a03e9f99..f567c219cff4 100644
--- a/drivers/mmc/host/dw_mmc-k3.c
+++ b/drivers/mmc/host/dw_mmc-k3.c
@@ -18,56 +18,19 @@
 #include "dw_mmc.h"
 #include "dw_mmc-pltfm.h"
 
-#define MAX_NUMS        10
-struct dw_mci_k3_priv_data {
-        u32     clk_table[MAX_NUMS];
-};
-
 static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios)
 {
-        struct dw_mci_k3_priv_data *priv = host->priv;
-        u32 rate = priv->clk_table[ios->timing];
         int ret;
 
-        if (!rate) {
-                dev_warn(host->dev,
-                        "no specified rate in timing %u\n", ios->timing);
-                return;
-        }
-
-        ret = clk_set_rate(host->ciu_clk, rate);
+        ret = clk_set_rate(host->ciu_clk, ios->clock);
         if (ret)
-                dev_warn(host->dev, "failed to set clock rate %uHz\n", rate);
+                dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock);
 
         host->bus_hz = clk_get_rate(host->ciu_clk);
 }
 
-static int dw_mci_k3_parse_dt(struct dw_mci *host)
-{
-        struct dw_mci_k3_priv_data *priv;
-        struct device_node *node = host->dev->of_node;
-        struct property *prop;
-        const __be32 *cur;
-        u32 val, num = 0;
-
-        priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
-        if (!priv) {
-                dev_err(host->dev, "mem alloc failed for private data\n");
-                return -ENOMEM;
-        }
-        host->priv = priv;
-
-        of_property_for_each_u32(node, "clock-freq-table", prop, cur, val) {
-                if (num >= MAX_NUMS)
-                        break;
-                priv->clk_table[num++] = val;
-        }
-        return 0;
-}
-
 static const struct dw_mci_drv_data k3_drv_data = {
         .set_ios                = dw_mci_k3_set_ios,
-        .parse_dt               = dw_mci_k3_parse_dt,
 };
 
 static const struct of_device_id dw_mci_k3_match[] = {