regulator: palmas: configure enable time for LDOs

As per datasheet (Referred TPS65913), the on-time for LDO is
500micro second. If LDO6 is in vibrator mode then the on-time
is 2000us.

Set the enable_time on regulator descriptor accordingly.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

1 files changed, 6 insertions, 0 deletions

diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index cb65c6f6b0b3..fba4faa422b8 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -979,6 +979,7 @@ static int palmas_regulators_probe(struct platform_device *pdev)
                         pmic->desc[id].min_uV = 900000;
                         pmic->desc[id].uV_step = 50000;
                         pmic->desc[id].linear_min_sel = 1;
+                        pmic->desc[id].enable_time = 500;
                         pmic->desc[id].vsel_reg =
                                         PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
                                                 palmas_regs_info[id].vsel_addr);
@@ -997,6 +998,11 @@ static int palmas_regulators_probe(struct platform_device *pdev)
                                 pmic->desc[id].min_uV = 450000;
                                 pmic->desc[id].uV_step = 25000;
                         }
+
+                        /* LOD6 in vibrator mode will have enable time 2000us */
+                        if (pdata && pdata->ldo6_vibrator &&
+                                (id == PALMAS_REG_LDO6))
+                                pmic->desc[id].enable_time = 2000;
                 } else {
                         pmic->desc[id].n_voltages = 1;
                         pmic->desc[id].ops = &palmas_ops_extreg;