USB: xhci: Performance - move interrupt handlers into xhci-ring.c

Most of the work for interrupt handling is done in xhci-ring.c, so it makes
sense to move the functions that are first called when an interrupt happens
(xhci_irq() or xhci_msi_irq()) into xhci-ring.c, so that the compiler can better
optimize them.

Shorten some lines to make it pass checkpatch.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

3 files changed, 104 insertions, 103 deletions

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 7f1c54585b63..4b50a02ba114 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2030,6 +2030,109 @@ void xhci_handle_event(struct xhci_hcd *xhci)
         /* Are there more items on the event ring? */
         xhci_handle_event(xhci);
 }
+/*
+ * Called in interrupt context when there might be work
+ * queued on the event ring
+ *
+ * xhci->lock must be held by caller.
+ */
+static void xhci_work(struct xhci_hcd *xhci)
+{
+        u32 temp;
+        u64 temp_64;
+
+        /*
+         * Clear the op reg interrupt status first,
+         * so we can receive interrupts from other MSI-X interrupters.
+         * Write 1 to clear the interrupt status.
+         */
+        temp = xhci_readl(xhci, &xhci->op_regs->status);
+        temp |= STS_EINT;
+        xhci_writel(xhci, temp, &xhci->op_regs->status);
+        /* FIXME when MSI-X is supported and there are multiple vectors */
+        /* Clear the MSI-X event interrupt status */
+
+        /* Acknowledge the interrupt */
+        temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+        temp |= 0x3;
+        xhci_writel(xhci, temp, &xhci->ir_set->irq_pending);
+
+        if (xhci->xhc_state & XHCI_STATE_DYING)
+                xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
+                                "Shouldn't IRQs be disabled?\n");
+        else
+                /* FIXME this should be a delayed service routine
+                 * that clears the EHB.
+                 */
+                xhci_handle_event(xhci);
+
+        /* Clear the event handler busy flag (RW1C); event ring is empty. */
+        temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+        xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
+        /* Flush posted writes -- FIXME is this necessary? */
+        xhci_readl(xhci, &xhci->ir_set->irq_pending);
+}
+
+/*
+ * xHCI spec says we can get an interrupt, and if the HC has an error condition,
+ * we might get bad data out of the event ring.  Section 4.10.2.7 has a list of
+ * indicators of an event TRB error, but we check the status *first* to be safe.
+ */
+irqreturn_t xhci_irq(struct usb_hcd *hcd)
+{
+        struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+        u32 temp, temp2;
+        union xhci_trb *trb;
+
+        spin_lock(&xhci->lock);
+        trb = xhci->event_ring->dequeue;
+        /* Check if the xHC generated the interrupt, or the irq is shared */
+        temp = xhci_readl(xhci, &xhci->op_regs->status);
+        temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+        if (temp == 0xffffffff && temp2 == 0xffffffff)
+                goto hw_died;
+
+        if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) {
+                spin_unlock(&xhci->lock);
+                xhci_warn(xhci, "Spurious interrupt.\n");
+                return IRQ_NONE;
+        }
+        xhci_dbg(xhci, "op reg status = %08x\n", temp);
+        xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2);
+        xhci_dbg(xhci, "Event ring dequeue ptr:\n");
+        xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
+                        (unsigned long long)
+                        xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
+                        lower_32_bits(trb->link.segment_ptr),
+                        upper_32_bits(trb->link.segment_ptr),
+                        (unsigned int) trb->link.intr_target,
+                        (unsigned int) trb->link.control);
+
+        if (temp & STS_FATAL) {
+                xhci_warn(xhci, "WARNING: Host System Error\n");
+                xhci_halt(xhci);
+hw_died:
+                xhci_to_hcd(xhci)->state = HC_STATE_HALT;
+                spin_unlock(&xhci->lock);
+                return -ESHUTDOWN;
+        }
+
+        xhci_work(xhci);
+        spin_unlock(&xhci->lock);
+
+        return IRQ_HANDLED;
+}
+
+irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd)
+{
+        irqreturn_t ret;
+
+        set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+        ret = xhci_irq(hcd);
+
+        return ret;
+}
 
 /****           Endpoint Ring Operations        ****/
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index f5e0b00cbb83..d5c550ea3e68 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -172,17 +172,6 @@ int xhci_reset(struct xhci_hcd *xhci)
         return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000);
 }
 
-static irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd)
-{
-        irqreturn_t ret;
-
-        set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
-
-        ret = xhci_irq(hcd);
-
-        return ret;
-}
-
 /*
  * Free IRQs
  * free all IRQs request
@@ -332,100 +321,8 @@ int xhci_init(struct usb_hcd *hcd)
         return retval;
 }
 
-/*
- * Called in interrupt context when there might be work
- * queued on the event ring
- *
- * xhci->lock must be held by caller.
- */
-static void xhci_work(struct xhci_hcd *xhci)
-{
-        u32 temp;
-        u64 temp_64;
-
-        /*
-         * Clear the op reg interrupt status first,
-         * so we can receive interrupts from other MSI-X interrupters.
-         * Write 1 to clear the interrupt status.
-         */
-        temp = xhci_readl(xhci, &xhci->op_regs->status);
-        temp |= STS_EINT;
-        xhci_writel(xhci, temp, &xhci->op_regs->status);
-        /* FIXME when MSI-X is supported and there are multiple vectors */
-        /* Clear the MSI-X event interrupt status */
-
-        /* Acknowledge the interrupt */
-        temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
-        temp |= 0x3;
-        xhci_writel(xhci, temp, &xhci->ir_set->irq_pending);
-        /* Flush posted writes */
-        xhci_readl(xhci, &xhci->ir_set->irq_pending);
-
-        if (xhci->xhc_state & XHCI_STATE_DYING)
-                xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
-                                "Shouldn't IRQs be disabled?\n");
-        else
-                /* FIXME this should be a delayed service routine
-                 * that clears the EHB.
-                 */
-                xhci_handle_event(xhci);
-
-        /* Clear the event handler busy flag (RW1C); the event ring should be empty. */
-        temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
-        xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
-        /* Flush posted writes -- FIXME is this necessary? */
-        xhci_readl(xhci, &xhci->ir_set->irq_pending);
-}
-
 /*-------------------------------------------------------------------------*/
 
-/*
- * xHCI spec says we can get an interrupt, and if the HC has an error condition,
- * we might get bad data out of the event ring.  Section 4.10.2.7 has a list of
- * indicators of an event TRB error, but we check the status *first* to be safe.
- */
-irqreturn_t xhci_irq(struct usb_hcd *hcd)
-{
-        struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-        u32 temp, temp2;
-        union xhci_trb *trb;
-
-        spin_lock(&xhci->lock);
-        trb = xhci->event_ring->dequeue;
-        /* Check if the xHC generated the interrupt, or the irq is shared */
-        temp = xhci_readl(xhci, &xhci->op_regs->status);
-        temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending);
-        if (temp == 0xffffffff && temp2 == 0xffffffff)
-                goto hw_died;
-
-        if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) {
-                spin_unlock(&xhci->lock);
-                return IRQ_NONE;
-        }
-        xhci_dbg(xhci, "op reg status = %08x\n", temp);
-        xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2);
-        xhci_dbg(xhci, "Event ring dequeue ptr:\n");
-        xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
-                        (unsigned long long)xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
-                        lower_32_bits(trb->link.segment_ptr),
-                        upper_32_bits(trb->link.segment_ptr),
-                        (unsigned int) trb->link.intr_target,
-                        (unsigned int) trb->link.control);
-
-        if (temp & STS_FATAL) {
-                xhci_warn(xhci, "WARNING: Host System Error\n");
-                xhci_halt(xhci);
-hw_died:
-                xhci_to_hcd(xhci)->state = HC_STATE_HALT;
-                spin_unlock(&xhci->lock);
-                return -ESHUTDOWN;
-        }
-
-        xhci_work(xhci);
-        spin_unlock(&xhci->lock);
-
-        return IRQ_HANDLED;
-}
 
 #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
 void xhci_event_ring_work(unsigned long arg)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 9fe95c4e2a56..6d829c41d963 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1371,6 +1371,7 @@ void xhci_stop(struct usb_hcd *hcd);
 void xhci_shutdown(struct usb_hcd *hcd);
 int xhci_get_frame(struct usb_hcd *hcd);
 irqreturn_t xhci_irq(struct usb_hcd *hcd);
+irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd);
 int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
 void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
 int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,