Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Au1000: set the PCI controller IO base
  [MIPS] Alchemy: Fix USB initialization.
  [MIPS] IP32: Fix fatal typo in address computation.

6 files changed, 12 insertions, 11 deletions

diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/au1000/common/pci.c
index 6c25e6c09f78..9be99a68932a 100644
--- a/arch/mips/au1000/common/pci.c
+++ b/arch/mips/au1000/common/pci.c
@@ -74,6 +74,7 @@ static int __init au1x_pci_setup(void)
                 printk(KERN_ERR "Unable to ioremap pci space\n");
                 return 1;
         }
+        au1x_controller.io_map_base = virt_io_addr;
 
 #ifdef CONFIG_DMA_NONCOHERENT
         {
diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/au1000/mtx-1/board_setup.c
index 7bc5af8917da..2c460c116570 100644
--- a/arch/mips/au1000/mtx-1/board_setup.c
+++ b/arch/mips/au1000/mtx-1/board_setup.c
@@ -54,11 +54,11 @@ void board_reset (void)
 
 void __init board_setup(void)
 {
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
         // enable USB power switch
         au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR );
         au_writel( 0x100000, GPIO2_OUTPUT );
-#endif // defined (CONFIG_USB_OHCI)
+#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
 
 #ifdef CONFIG_PCI
 #if defined(__MIPSEB__)
diff --git a/arch/mips/au1000/pb1000/board_setup.c b/arch/mips/au1000/pb1000/board_setup.c
index 824cfafaff92..0aed89114bfc 100644
--- a/arch/mips/au1000/pb1000/board_setup.c
+++ b/arch/mips/au1000/pb1000/board_setup.c
@@ -54,7 +54,7 @@ void __init board_setup(void)
         au_writel(0, SYS_PINSTATERD);
         udelay(100);
 
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
         /* zero and disable FREQ2 */
         sys_freqctrl = au_readl(SYS_FREQCTRL0);
         sys_freqctrl &= ~0xFFF00000;
@@ -102,7 +102,7 @@ void __init board_setup(void)
         /*
          * Route 48MHz FREQ2 into USB Host and/or Device
          */
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
         sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
 #endif
         au_writel(sys_clksrc, SYS_CLKSRC);
@@ -116,7 +116,7 @@ void __init board_setup(void)
         au_writel(pin_func, SYS_PINFUNC);
         au_writel(0x2800, SYS_TRIOUTCLR);
         au_writel(0x0030, SYS_OUTPUTCLR);
-#endif // defined (CONFIG_USB_OHCI)
+#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
 
         // make gpio 15 an input (for interrupt line)
         pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x100);
diff --git a/arch/mips/au1000/pb1100/board_setup.c b/arch/mips/au1000/pb1100/board_setup.c
index 6bc1f8e1b608..259ca05860c3 100644
--- a/arch/mips/au1000/pb1100/board_setup.c
+++ b/arch/mips/au1000/pb1100/board_setup.c
@@ -54,7 +54,7 @@ void __init board_setup(void)
         au_writel(0, SYS_PININPUTEN);
         udelay(100);
 
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
         {
                 u32 pin_func, sys_freqctrl, sys_clksrc;
 
@@ -98,7 +98,7 @@ void __init board_setup(void)
                 pin_func |= 0x8000;
                 au_writel(pin_func, SYS_PINFUNC);
         }
-#endif // defined (CONFIG_USB_OHCI)
+#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
 
         /* Enable sys bus clock divider when IDLE state or no bus activity. */
         au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
diff --git a/arch/mips/au1000/pb1500/board_setup.c b/arch/mips/au1000/pb1500/board_setup.c
index c9b655616fb3..a2d850db8902 100644
--- a/arch/mips/au1000/pb1500/board_setup.c
+++ b/arch/mips/au1000/pb1500/board_setup.c
@@ -56,7 +56,7 @@ void __init board_setup(void)
         au_writel(0, SYS_PINSTATERD);
         udelay(100);
 
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 
         /* GPIO201 is input for PCMCIA card detect */
         /* GPIO203 is input for PCMCIA interrupt request */
@@ -85,7 +85,7 @@ void __init board_setup(void)
         /*
          * Route 48MHz FREQ2 into USB Host and/or Device
          */
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
         sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
 #endif
         au_writel(sys_clksrc, SYS_CLKSRC);
@@ -95,7 +95,7 @@ void __init board_setup(void)
         // 2nd USB port is USB host
         pin_func |= 0x8000;
         au_writel(pin_func, SYS_PINFUNC);
-#endif // defined (CONFIG_USB_OHCI)
+#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
 
 
 
diff --git a/arch/mips/pci/ops-mace.c b/arch/mips/pci/ops-mace.c
index 2025f1f3e9f5..fe5451449304 100644
--- a/arch/mips/pci/ops-mace.c
+++ b/arch/mips/pci/ops-mace.c
@@ -33,7 +33,7 @@ static inline int mkaddr(struct pci_bus *bus, unsigned int devfn,
         unsigned int reg)
 {
         return ((bus->number & 0xff) << 16) |
-                (devfn & 0xff) << 8) |
+                ((devfn & 0xff) << 8) |
                 (reg & 0xfc);
 }