[ATM]: [lanai] kill lanai_ioctl() which just contains some old debugging code

Signed-off-by: Mitchell Blank Jr <mitch@sfgoth.com>
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 1 insertions, 89 deletions

diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index 2abf3edd0ffe..69f4c7ce9a63 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -39,7 +39,7 @@
  * o  lanai_change_qos() isn't written yet
  *
  * o  There aren't any ioctl's yet -- I'd like to eventually support
- *    setting loopback and LED modes that way.  (see lanai_ioctl)
+ *    setting loopback and LED modes that way.
  *
  * o  If the segmentation engine or DMA gets shut down we should restart
  *    card as per section 17.0i.  (see lanai_reset)
@@ -2435,93 +2435,6 @@ static int lanai_open(struct atm_vcc *atmvcc)
         return result;
 }
 
-#if 0
-/* ioctl operations for card */
-/* NOTE: these are all DEBUGGING ONLY currently */
-static int lanai_ioctl(struct atm_dev *atmdev, unsigned int cmd, void __user *arg)
-{
-        int result = 0;
-        struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
-        switch(cmd) {
-                case 2106275:
-                        shutdown_atm_dev(atmdev);
-                        return 0;
-                case 2200000: {
-                        unsigned long flags;
-                        spin_lock_irqsave(&lanai->servicelock, flags);
-                        run_service(lanai);
-                        spin_unlock_irqrestore(&lanai->servicelock, flags);
-                        return 0; }
-                case 2200002:
-                        get_statistics(lanai);
-                        return 0;
-                case 2200003: {
-                        unsigned int i;
-                        for (i = 0; i <= 0x5C ; i += 4) {
-                                if (i==0x48) /* Write-only butt reg */
-                                        continue;
-                                printk(KERN_CRIT DEV_LABEL "  0x%02X: "
-                                    "0x%08X\n", i,
-                                    (unsigned int) readl(lanai->base + i));
-                                barrier(); mb();
-                                pcistatus_check(lanai, 0);
-                                barrier(); mb();
-                        }
-                        return 0; }
-                case 2200004: {
-                        u8 b;
-                        u16 w;
-                        u32 dw;
-                        struct pci_dev *pci = lanai->pci;
-                        (void) pci_read_config_word(pci, PCI_VENDOR_ID, &w);
-                        DPRINTK("vendor = 0x%X\n", (unsigned int) w);
-                        (void) pci_read_config_word(pci, PCI_DEVICE_ID, &w);
-                        DPRINTK("device = 0x%X\n", (unsigned int) w);
-                        (void) pci_read_config_word(pci, PCI_COMMAND, &w);
-                        DPRINTK("command = 0x%X\n", (unsigned int) w);
-                        (void) pci_read_config_word(pci, PCI_STATUS, &w);
-                        DPRINTK("status = 0x%X\n", (unsigned int) w);
-                        (void) pci_read_config_dword(pci,
-                            PCI_CLASS_REVISION, &dw);
-                        DPRINTK("class/revision = 0x%X\n", (unsigned int) dw);
-                        (void) pci_read_config_byte(pci,
-                            PCI_CACHE_LINE_SIZE, &b);
-                        DPRINTK("cache line size = 0x%X\n", (unsigned int) b);
-                        (void) pci_read_config_byte(pci, PCI_LATENCY_TIMER, &b);
-                        DPRINTK("latency = %d (0x%X)\n",
-                            (int) b, (unsigned int) b);
-                        (void) pci_read_config_byte(pci, PCI_HEADER_TYPE, &b);
-                        DPRINTK("header type = 0x%X\n", (unsigned int) b);
-                        (void) pci_read_config_byte(pci, PCI_BIST, &b);
-                        DPRINTK("bist = 0x%X\n", (unsigned int) b);
-                        /* skipping a few here */
-                        (void) pci_read_config_byte(pci,
-                            PCI_INTERRUPT_LINE, &b);
-                        DPRINTK("pci_int_line = 0x%X\n", (unsigned int) b);
-                        (void) pci_read_config_byte(pci,
-                            PCI_INTERRUPT_PIN, &b);
-                        DPRINTK("pci_int_pin = 0x%X\n", (unsigned int) b);
-                        (void) pci_read_config_byte(pci, PCI_MIN_GNT, &b);
-                        DPRINTK("min_gnt = 0x%X\n", (unsigned int) b);
-                        (void) pci_read_config_byte(pci, PCI_MAX_LAT, &b);
-                        DPRINTK("max_lat = 0x%X\n", (unsigned int) b); }
-                        return 0;
-#ifdef USE_POWERDOWN
-                case 2200005:
-                        DPRINTK("Coming out of powerdown\n");
-                        lanai->conf1 &= ~CONFIG1_POWERDOWN;
-                        conf1_write(lanai);
-                        return 0;
-#endif
-                default:
-                        result = -ENOIOCTLCMD;
-        }
-        return result;
-}
-#else /* !0 */
-#define lanai_ioctl NULL
-#endif /* 0 */
-
 static int lanai_send(struct atm_vcc *atmvcc, struct sk_buff *skb)
 {
         struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data;
@@ -2679,7 +2592,6 @@ static const struct atmdev_ops ops = {
         .dev_close      = lanai_dev_close,
         .open           = lanai_open,
         .close          = lanai_close,
-        .ioctl          = lanai_ioctl,
         .getsockopt     = NULL,
         .setsockopt     = NULL,
         .send           = lanai_send,