mfd: Use uppercase only for asic3 macros and defines

Let's be consistent and use uppercase only, for both macro and defines.

Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

2 files changed, 72 insertions, 72 deletions

diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index 1924eb01cc8c..9931581b08a1 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -55,8 +55,8 @@ static inline u32 asic3_read_register(struct asic3 *asic,
 
 /* IRQs */
 #define MAX_ASIC_ISR_LOOPS    20
-#define ASIC3_GPIO_Base_INCR \
-        (ASIC3_GPIO_B_Base - ASIC3_GPIO_A_Base)
+#define ASIC3_GPIO_BASE_INCR \
+        (ASIC3_GPIO_B_BASE - ASIC3_GPIO_A_BASE)
 
 static void asic3_irq_flip_edge(struct asic3 *asic,
                                 u32 base, int bit)
@@ -66,10 +66,10 @@ static void asic3_irq_flip_edge(struct asic3 *asic,
 
         spin_lock_irqsave(&asic->lock, flags);
         edge = asic3_read_register(asic,
-                                   base + ASIC3_GPIO_EdgeTrigger);
+                                   base + ASIC3_GPIO_EDGE_TRIGGER);
         edge ^= bit;
         asic3_write_register(asic,
-                             base + ASIC3_GPIO_EdgeTrigger, edge);
+                             base + ASIC3_GPIO_EDGE_TRIGGER, edge);
         spin_unlock_irqrestore(&asic->lock, flags);
 }
 
@@ -89,7 +89,7 @@ static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc)
 
                 spin_lock_irqsave(&asic->lock, flags);
                 status = asic3_read_register(asic,
-                                             ASIC3_OFFSET(INTR, PIntStat));
+                                             ASIC3_OFFSET(INTR, P_INT_STAT));
                 spin_unlock_irqrestore(&asic->lock, flags);
 
                 /* Check all ten register bits */
@@ -101,17 +101,17 @@ static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc)
                         if (status & (1 << bank)) {
                                 unsigned long base, istat;
 
-                                base = ASIC3_GPIO_A_Base
-                                       + bank * ASIC3_GPIO_Base_INCR;
+                                base = ASIC3_GPIO_A_BASE
+                                       + bank * ASIC3_GPIO_BASE_INCR;
 
                                 spin_lock_irqsave(&asic->lock, flags);
                                 istat = asic3_read_register(asic,
                                                             base +
-                                                            ASIC3_GPIO_IntStatus);
+                                                            ASIC3_GPIO_INT_STATUS);
                                 /* Clearing IntStatus */
                                 asic3_write_register(asic,
                                                      base +
-                                                     ASIC3_GPIO_IntStatus, 0);
+                                                     ASIC3_GPIO_INT_STATUS, 0);
                                 spin_unlock_irqrestore(&asic->lock, flags);
 
                                 for (i = 0; i < ASIC3_GPIOS_PER_BANK; i++) {
@@ -154,7 +154,7 @@ static inline int asic3_irq_to_bank(struct asic3 *asic, int irq)
 
         n = (irq - asic->irq_base) >> 4;
 
-        return (n * (ASIC3_GPIO_B_Base - ASIC3_GPIO_A_Base));
+        return (n * (ASIC3_GPIO_B_BASE - ASIC3_GPIO_A_BASE));
 }
 
 static inline int asic3_irq_to_index(struct asic3 *asic, int irq)
@@ -172,9 +172,9 @@ static void asic3_mask_gpio_irq(unsigned int irq)
         index = asic3_irq_to_index(asic, irq);
 
         spin_lock_irqsave(&asic->lock, flags);
-        val = asic3_read_register(asic, bank + ASIC3_GPIO_Mask);
+        val = asic3_read_register(asic, bank + ASIC3_GPIO_MASK);
         val |= 1 << index;
-        asic3_write_register(asic, bank + ASIC3_GPIO_Mask, val);
+        asic3_write_register(asic, bank + ASIC3_GPIO_MASK, val);
         spin_unlock_irqrestore(&asic->lock, flags);
 }
 
@@ -186,15 +186,15 @@ static void asic3_mask_irq(unsigned int irq)
 
         spin_lock_irqsave(&asic->lock, flags);
         regval = asic3_read_register(asic,
-                                     ASIC3_INTR_Base +
-                                     ASIC3_INTR_IntMask);
+                                     ASIC3_INTR_BASE +
+                                     ASIC3_INTR_INT_MASK);
 
         regval &= ~(ASIC3_INTMASK_MASK0 <<
                     (irq - (asic->irq_base + ASIC3_NUM_GPIOS)));
 
         asic3_write_register(asic,
-                             ASIC3_INTR_Base +
-                             ASIC3_INTR_IntMask,
+                             ASIC3_INTR_BASE +
+                             ASIC3_INTR_INT_MASK,
                              regval);
         spin_unlock_irqrestore(&asic->lock, flags);
 }
@@ -209,9 +209,9 @@ static void asic3_unmask_gpio_irq(unsigned int irq)
         index = asic3_irq_to_index(asic, irq);
 
         spin_lock_irqsave(&asic->lock, flags);
-        val = asic3_read_register(asic, bank + ASIC3_GPIO_Mask);
+        val = asic3_read_register(asic, bank + ASIC3_GPIO_MASK);
         val &= ~(1 << index);
-        asic3_write_register(asic, bank + ASIC3_GPIO_Mask, val);
+        asic3_write_register(asic, bank + ASIC3_GPIO_MASK, val);
         spin_unlock_irqrestore(&asic->lock, flags);
 }
 
@@ -223,15 +223,15 @@ static void asic3_unmask_irq(unsigned int irq)
 
         spin_lock_irqsave(&asic->lock, flags);
         regval = asic3_read_register(asic,
-                                     ASIC3_INTR_Base +
-                                     ASIC3_INTR_IntMask);
+                                     ASIC3_INTR_BASE +
+                                     ASIC3_INTR_INT_MASK);
 
         regval |= (ASIC3_INTMASK_MASK0 <<
                    (irq - (asic->irq_base + ASIC3_NUM_GPIOS)));
 
         asic3_write_register(asic,
-                             ASIC3_INTR_Base +
-                             ASIC3_INTR_IntMask,
+                             ASIC3_INTR_BASE +
+                             ASIC3_INTR_INT_MASK,
                              regval);
         spin_unlock_irqrestore(&asic->lock, flags);
 }
@@ -249,11 +249,11 @@ static int asic3_gpio_irq_type(unsigned int irq, unsigned int type)
 
         spin_lock_irqsave(&asic->lock, flags);
         level = asic3_read_register(asic,
-                                    bank + ASIC3_GPIO_LevelTrigger);
+                                    bank + ASIC3_GPIO_LEVEL_TRIGGER);
         edge = asic3_read_register(asic,
-                                   bank + ASIC3_GPIO_EdgeTrigger);
+                                   bank + ASIC3_GPIO_EDGE_TRIGGER);
         trigger = asic3_read_register(asic,
-                                      bank + ASIC3_GPIO_TriggerType);
+                                      bank + ASIC3_GPIO_TRIGGER_TYPE);
         asic->irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit;
 
         if (type == IRQT_RISING) {
@@ -283,11 +283,11 @@ static int asic3_gpio_irq_type(unsigned int irq, unsigned int type)
                  */
                 dev_notice(asic->dev, "irq type not changed\n");
         }
-        asic3_write_register(asic, bank + ASIC3_GPIO_LevelTrigger,
+        asic3_write_register(asic, bank + ASIC3_GPIO_LEVEL_TRIGGER,
                              level);
-        asic3_write_register(asic, bank + ASIC3_GPIO_EdgeTrigger,
+        asic3_write_register(asic, bank + ASIC3_GPIO_EDGE_TRIGGER,
                              edge);
-        asic3_write_register(asic, bank + ASIC3_GPIO_TriggerType,
+        asic3_write_register(asic, bank + ASIC3_GPIO_TRIGGER_TYPE,
                              trigger);
         spin_unlock_irqrestore(&asic->lock, flags);
         return 0;
@@ -336,7 +336,7 @@ static int asic3_irq_probe(struct platform_device *pdev)
                 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
         }
 
-        asic3_write_register(asic, ASIC3_OFFSET(INTR, IntMask),
+        asic3_write_register(asic, ASIC3_OFFSET(INTR, INT_MASK),
                              ASIC3_INTMASK_GINTMASK);
 
         set_irq_chained_handler(asic->irq_nr, asic3_irq_demux);
@@ -374,7 +374,7 @@ static int asic3_gpio_direction(struct gpio_chip *chip,
         asic = container_of(chip, struct asic3, gpio);
         gpio_base = ASIC3_GPIO_TO_BASE(offset);
 
-        if (gpio_base > ASIC3_GPIO_D_Base) {
+        if (gpio_base > ASIC3_GPIO_D_BASE) {
                 dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n",
                         gpio_base, offset);
                 return -EINVAL;
@@ -382,7 +382,7 @@ static int asic3_gpio_direction(struct gpio_chip *chip,
 
         spin_lock_irqsave(&asic->lock, flags);
 
-        out_reg = asic3_read_register(asic, gpio_base + ASIC3_GPIO_Direction);
+        out_reg = asic3_read_register(asic, gpio_base + ASIC3_GPIO_DIRECTION);
 
         /* Input is 0, Output is 1 */
         if (out)
@@ -390,7 +390,7 @@ static int asic3_gpio_direction(struct gpio_chip *chip,
         else
                 out_reg &= ~mask;
 
-        asic3_write_register(asic, gpio_base + ASIC3_GPIO_Direction, out_reg);
+        asic3_write_register(asic, gpio_base + ASIC3_GPIO_DIRECTION, out_reg);
 
         spin_unlock_irqrestore(&asic->lock, flags);
 
@@ -420,13 +420,13 @@ static int asic3_gpio_get(struct gpio_chip *chip,
         asic = container_of(chip, struct asic3, gpio);
         gpio_base = ASIC3_GPIO_TO_BASE(offset);
 
-        if (gpio_base > ASIC3_GPIO_D_Base) {
+        if (gpio_base > ASIC3_GPIO_D_BASE) {
                 dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n",
                         gpio_base, offset);
                 return -EINVAL;
         }
 
-        return asic3_read_register(asic, gpio_base + ASIC3_GPIO_Status) & mask;
+        return asic3_read_register(asic, gpio_base + ASIC3_GPIO_STATUS) & mask;
 }
 
 static void asic3_gpio_set(struct gpio_chip *chip,
@@ -440,7 +440,7 @@ static void asic3_gpio_set(struct gpio_chip *chip,
         asic = container_of(chip, struct asic3, gpio);
         gpio_base = ASIC3_GPIO_TO_BASE(offset);
 
-        if (gpio_base > ASIC3_GPIO_D_Base) {
+        if (gpio_base > ASIC3_GPIO_D_BASE) {
                 dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n",
                         gpio_base, offset);
                 return;
@@ -450,14 +450,14 @@ static void asic3_gpio_set(struct gpio_chip *chip,
 
         spin_lock_irqsave(&asic->lock, flags);
 
-        out_reg = asic3_read_register(asic, gpio_base + ASIC3_GPIO_Out);
+        out_reg = asic3_read_register(asic, gpio_base + ASIC3_GPIO_OUT);
 
         if (value)
                 out_reg |= mask;
         else
                 out_reg &= ~mask;
 
-        asic3_write_register(asic, gpio_base + ASIC3_GPIO_Out, out_reg);
+        asic3_write_register(asic, gpio_base + ASIC3_GPIO_OUT, out_reg);
 
         spin_unlock_irqrestore(&asic->lock, flags);
 
@@ -478,10 +478,10 @@ static int asic3_gpio_probe(struct platform_device *pdev,
         memset(dir_reg, 0, ASIC3_NUM_GPIO_BANKS);
 
         /* Enable all GPIOs */
-        asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, Mask), 0xffff);
-        asic3_write_register(asic, ASIC3_GPIO_OFFSET(B, Mask), 0xffff);
-        asic3_write_register(asic, ASIC3_GPIO_OFFSET(C, Mask), 0xffff);
-        asic3_write_register(asic, ASIC3_GPIO_OFFSET(D, Mask), 0xffff);
+        asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, MASK), 0xffff);
+        asic3_write_register(asic, ASIC3_GPIO_OFFSET(B, MASK), 0xffff);
+        asic3_write_register(asic, ASIC3_GPIO_OFFSET(C, MASK), 0xffff);
+        asic3_write_register(asic, ASIC3_GPIO_OFFSET(D, MASK), 0xffff);
 
         for (i = 0; i < num; i++) {
                 u8 alt, pin, dir, init, bank_num, bit_num;
@@ -503,14 +503,14 @@ static int asic3_gpio_probe(struct platform_device *pdev,
         for (i = 0; i < ASIC3_NUM_GPIO_BANKS; i++) {
                 asic3_write_register(asic,
                                      ASIC3_BANK_TO_BASE(i) +
-                                     ASIC3_GPIO_Direction,
+                                     ASIC3_GPIO_DIRECTION,
                                      dir_reg[i]);
                 asic3_write_register(asic,
-                                     ASIC3_BANK_TO_BASE(i) + ASIC3_GPIO_Out,
+                                     ASIC3_BANK_TO_BASE(i) + ASIC3_GPIO_OUT,
                                      out_reg[i]);
                 asic3_write_register(asic,
                                      ASIC3_BANK_TO_BASE(i) +
-                                     ASIC3_GPIO_AltFunction,
+                                     ASIC3_GPIO_ALT_FUNCTION,
                                      alt_reg[i]);
         }
 
diff --git a/include/linux/mfd/asic3.h b/include/linux/mfd/asic3.h
index 7e47cfb0c440..6461a2ae69a2 100644
--- a/include/linux/mfd/asic3.h
+++ b/include/linux/mfd/asic3.h
@@ -45,39 +45,39 @@ struct asic3_platform_data {
 /* All offsets below are specified with this address bus shift */
 #define ASIC3_DEFAULT_ADDR_SHIFT 2
 
-#define ASIC3_OFFSET(base, reg) (ASIC3_##base##_Base + ASIC3_##base##_##reg)
+#define ASIC3_OFFSET(base, reg) (ASIC3_##base##_BASE + ASIC3_##base##_##reg)
 #define ASIC3_GPIO_OFFSET(base, reg) \
-        (ASIC3_GPIO_##base##_Base + ASIC3_GPIO_##reg)
+        (ASIC3_GPIO_##base##_BASE + ASIC3_GPIO_##reg)
 
-#define ASIC3_GPIO_A_Base      0x0000
-#define ASIC3_GPIO_B_Base      0x0100
-#define ASIC3_GPIO_C_Base      0x0200
-#define ASIC3_GPIO_D_Base      0x0300
+#define ASIC3_GPIO_A_BASE      0x0000
+#define ASIC3_GPIO_B_BASE      0x0100
+#define ASIC3_GPIO_C_BASE      0x0200
+#define ASIC3_GPIO_D_BASE      0x0300
 
 #define ASIC3_GPIO_TO_BANK(gpio) ((gpio) >> 4)
 #define ASIC3_GPIO_TO_BIT(gpio)  ((gpio) - \
                                   (ASIC3_GPIOS_PER_BANK * ((gpio) >> 4)))
 #define ASIC3_GPIO_TO_MASK(gpio) (1 << ASIC3_GPIO_TO_BIT(gpio))
-#define ASIC3_GPIO_TO_BASE(gpio) (ASIC3_GPIO_A_Base + (((gpio) >> 4) * 0x0100))
-#define ASIC3_BANK_TO_BASE(bank) (ASIC3_GPIO_A_Base + ((bank) * 0x100))
-
-#define ASIC3_GPIO_Mask          0x00    /* R/W 0:don't mask */
-#define ASIC3_GPIO_Direction     0x04    /* R/W 0:input */
-#define ASIC3_GPIO_Out           0x08    /* R/W 0:output low */
-#define ASIC3_GPIO_TriggerType   0x0c    /* R/W 0:level */
-#define ASIC3_GPIO_EdgeTrigger   0x10    /* R/W 0:falling */
-#define ASIC3_GPIO_LevelTrigger  0x14    /* R/W 0:low level detect */
-#define ASIC3_GPIO_SleepMask     0x18    /* R/W 0:don't mask in sleep mode */
-#define ASIC3_GPIO_SleepOut      0x1c    /* R/W level 0:low in sleep mode */
-#define ASIC3_GPIO_BattFaultOut  0x20    /* R/W level 0:low in batt_fault */
-#define ASIC3_GPIO_IntStatus     0x24    /* R/W 0:none, 1:detect */
-#define ASIC3_GPIO_AltFunction   0x28    /* R/W 1:LED register control */
-#define ASIC3_GPIO_SleepConf     0x2c    /*
+#define ASIC3_GPIO_TO_BASE(gpio) (ASIC3_GPIO_A_BASE + (((gpio) >> 4) * 0x0100))
+#define ASIC3_BANK_TO_BASE(bank) (ASIC3_GPIO_A_BASE + ((bank) * 0x100))
+
+#define ASIC3_GPIO_MASK          0x00    /* R/W 0:don't mask */
+#define ASIC3_GPIO_DIRECTION     0x04    /* R/W 0:input */
+#define ASIC3_GPIO_OUT           0x08    /* R/W 0:output low */
+#define ASIC3_GPIO_TRIGGER_TYPE  0x0c    /* R/W 0:level */
+#define ASIC3_GPIO_EDGE_TRIGGER  0x10    /* R/W 0:falling */
+#define ASIC3_GPIO_LEVEL_TRIGGER 0x14    /* R/W 0:low level detect */
+#define ASIC3_GPIO_SLEEP_MASK    0x18    /* R/W 0:don't mask in sleep mode */
+#define ASIC3_GPIO_SLEEP_OUT     0x1c    /* R/W level 0:low in sleep mode */
+#define ASIC3_GPIO_BAT_FAULT_OUT 0x20    /* R/W level 0:low in batt_fault */
+#define ASIC3_GPIO_INT_STATUS    0x24    /* R/W 0:none, 1:detect */
+#define ASIC3_GPIO_ALT_FUNCTION  0x28    /* R/W 1:LED register control */
+#define ASIC3_GPIO_SLEEP_CONF    0x2c    /*
                                           * R/W bit 1: autosleep
                                           * 0: disable gposlpout in normal mode,
                                           * enable gposlpout in sleep mode.
                                           */
-#define ASIC3_GPIO_Status        0x30    /* R   Pin status */
+#define ASIC3_GPIO_STATUS        0x30    /* R   Pin status */
 
 /*
  * ASIC3 GPIO config
@@ -137,7 +137,7 @@ struct asic3_platform_data {
 #define LED_AUTOSTOP    (1 << 5) /* LED ON/OFF auto stop 0:disable, 1:enable */
 #define LED_ALWAYS      (1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask */
 
-#define ASIC3_CLOCK_Base                0x0A00
+#define ASIC3_CLOCK_BASE           0x0A00
 #define ASIC3_CLOCK_CDEX           0x00
 #define ASIC3_CLOCK_SEL            0x04
 
@@ -168,12 +168,12 @@ struct asic3_platform_data {
 #define CLOCK_SEL_CX            (1 << 2)
 
 
-#define ASIC3_INTR_Base         0x0B00
+#define ASIC3_INTR_BASE         0x0B00
 
-#define ASIC3_INTR_IntMask       0x00  /* Interrupt mask control */
-#define ASIC3_INTR_PIntStat      0x04  /* Peripheral interrupt status */
-#define ASIC3_INTR_IntCPS        0x08  /* Interrupt timer clock pre-scale */
-#define ASIC3_INTR_IntTBS        0x0c  /* Interrupt timer set */
+#define ASIC3_INTR_INT_MASK       0x00  /* Interrupt mask control */
+#define ASIC3_INTR_P_INT_STAT     0x04  /* Peripheral interrupt status */
+#define ASIC3_INTR_INT_CPS        0x08  /* Interrupt timer clock pre-scale */
+#define ASIC3_INTR_INT_TBS        0x0c  /* Interrupt timer set */
 
 #define ASIC3_INTMASK_GINTMASK    (1 << 0)  /* Global INTs mask 1:enable */
 #define ASIC3_INTMASK_GINTEL      (1 << 1)  /* 1: rising edge, 0: hi level */