[POWERPC] mpc5200: Amalgamated DTS fixes and updates

DTS updates that fix booting problems on mpc5200-based boards:
- change to ethernet reg property
- addition of mdio and phy nodes
- removal of pci node (Motion-Pro board)

Other DTS updates:
- update i2c device tree nodes
- add lpb bus node and flash device (without partitions defined)
- add rtc i2c nodes

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>

3 files changed, 112 insertions, 30 deletions

diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index 30737eafe68e..c6ca6319e4f7 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -212,13 +212,30 @@
                 ethernet@3000 {
                         device_type = "network";
                         compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-                        reg = <3000 800>;
+                        reg = <3000 400>;
                         local-mac-address = [ 00 00 00 00 00 00 ];
                         interrupts = <2 5 0>;
                         interrupt-parent = <&mpc5200_pic>;
+                        phy-handle = <&phy0>;
+                };
+
+                mdio@3000 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+                        reg = <3000 400>;       // fec range, since we need to setup fec interrupts
+                        interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+                        interrupt-parent = <&mpc5200_pic>;
+
+                        phy0: ethernet-phy@0 {
+                                device_type = "ethernet-phy";
+                                reg = <0>;
+                        };
                 };
 
                 i2c@3d40 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
                         reg = <3d40 40>;
                         interrupts = <2 10 0>;
@@ -231,4 +248,22 @@
                         reg = <8000 4000>;
                 };
         };
+
+        lpb {
+                model = "fsl,lpb";
+                compatible = "fsl,lpb";
+                #address-cells = <2>;
+                #size-cells = <1>;
+                ranges = <0 0 fc000000 2000000>;
+
+                // 16-bit flash device at LocalPlus Bus CS0
+                flash@0,0 {
+                        compatible = "cfi-flash";
+                        reg = <0 0 2000000>;
+                        bank-width = <2>;
+                        device-width = <2>;
+                        #size-cells = <1>;
+                        #address-cells = <1>;
+                };
+        };
 };
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 76951ab038ee..2b0dde058f8e 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -148,7 +148,6 @@
                         interrupt-parent = <&mpc5200_pic>;
                 };
 
-
                 spi@f00 {
                         compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
                         reg = <f00 20>;
@@ -209,10 +208,25 @@
                 ethernet@3000 {
                         device_type = "network";
                         compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-                        reg = <3000 800>;
+                        reg = <3000 400>;
                         local-mac-address = [ 00 00 00 00 00 00 ];
                         interrupts = <2 5 0>;
                         interrupt-parent = <&mpc5200_pic>;
+                        phy-handle = <&phy0>;
+                };
+
+                mdio@3000 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+                        reg = <3000 400>;       // fec range, since we need to setup fec interrupts
+                        interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+                        interrupt-parent = <&mpc5200_pic>;
+
+                        phy0: ethernet-phy@2 {
+                                device_type = "ethernet-phy";
+                                reg = <2>;
+                        };
                 };
 
                 ata@3a00 {
@@ -223,11 +237,19 @@
                 };
 
                 i2c@3d40 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
                         reg = <3d40 40>;
                         interrupts = <2 10 0>;
                         interrupt-parent = <&mpc5200_pic>;
                         fsl5200-clocking;
+
+                        rtc@68 {
+                                device_type = "rtc";
+                                compatible = "dallas,ds1339";
+                                reg = <68>;
+                        };
                 };
 
                 sram@8000 {
@@ -240,7 +262,8 @@
                 compatible = "fsl,lpb";
                 #address-cells = <2>;
                 #size-cells = <1>;
-                ranges = <1 0 50000000 00010000
+                ranges = <0 0 ff000000 01000000
+                          1 0 50000000 00010000
                           2 0 50010000 00010000
                           3 0 50020000 00010000>;
 
@@ -271,31 +294,15 @@
                         compatible = "promess,pro_module_dio";
                         reg = <3 800 2>;
                 };
-        };
 
-        pci@f0000d00 {
-                #interrupt-cells = <1>;
-                #size-cells = <2>;
-                #address-cells = <3>;
-                device_type = "pci";
-                compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
-                reg = <f0000d00 100>;
-                interrupt-map-mask = <f800 0 0 7>;
-                interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
-                                 c000 0 0 2 &mpc5200_pic 1 1 3
-                                 c000 0 0 3 &mpc5200_pic 1 2 3
-                                 c000 0 0 4 &mpc5200_pic 1 3 3
-
-                                 c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
-                                 c800 0 0 2 &mpc5200_pic 1 2 3
-                                 c800 0 0 3 &mpc5200_pic 1 3 3
-                                 c800 0 0 4 &mpc5200_pic 0 0 3>;
-                clock-frequency = <0>; // From boot loader
-                interrupts = <2 8 0 2 9 0 2 a 0>;
-                interrupt-parent = <&mpc5200_pic>;
-                bus-range = <0 0>;
-                ranges = <42000000 0 80000000 80000000 0 20000000
-                          02000000 0 a0000000 a0000000 0 10000000
-                          01000000 0 00000000 b0000000 0 01000000>;
+                // 16-bit flash device at LocalPlus Bus CS0
+                flash@0,0 {
+                        compatible = "cfi-flash";
+                        reg = <0 0 01000000>;
+                        bank-width = <2>;
+                        device-width = <2>;
+                        #size-cells = <1>;
+                        #address-cells = <1>;
+                };
         };
 };
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index c86464f007da..65bcea6a0173 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -127,10 +127,25 @@
                 ethernet@3000 {
                         device_type = "network";
                         compatible = "fsl,mpc5200-fec";
-                        reg = <3000 800>;
+                        reg = <3000 400>;
                         local-mac-address = [ 00 00 00 00 00 00 ];
                         interrupts = <2 5 0>;
                         interrupt-parent = <&mpc5200_pic>;
+                        phy-handle = <&phy0>;
+                };
+
+                mdio@3000 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+                        reg = <3000 400>;       // fec range, since we need to setup fec interrupts
+                        interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+                        interrupt-parent = <&mpc5200_pic>;
+
+                        phy0: ethernet-phy@0 {
+                                device_type = "ethernet-phy";
+                                reg = <0>;
+                        };
                 };
 
                 ata@3a00 {
@@ -141,11 +156,19 @@
                 };
 
                 i2c@3d40 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
                         compatible = "fsl,mpc5200-i2c","fsl-i2c";
                         reg = <3d40 40>;
                         interrupts = <2 10 0>;
                         interrupt-parent = <&mpc5200_pic>;
                         fsl5200-clocking;
+
+                         rtc@68 {
+                                device_type = "rtc";
+                                compatible = "dallas,ds1307";
+                                reg = <68>;
+                        };
                 };
 
                 sram@8000 {
@@ -154,6 +177,23 @@
                 };
         };
 
+        lpb {
+                model = "fsl,lpb";
+                compatible = "fsl,lpb";
+                #address-cells = <2>;
+                #size-cells = <1>;
+                ranges = <0 0 fc000000 02000000>;
+
+                flash@0,0 {
+                        compatible = "cfi-flash";
+                        reg = <0 0 02000000>;
+                        bank-width = <4>;
+                        device-width = <2>;
+                        #size-cells = <1>;
+                        #address-cells = <1>;
+                };
+        };
+
         pci@f0000d00 {
                 #interrupt-cells = <1>;
                 #size-cells = <2>;