davinci: clock: add support for setting sysclk rate

Setting sysclk rate will be useful in cases where the
sysclk is not at a fixed ratio to the PLL output but
can asynchronously be changed.

This support forms the basis of attempt to keep the AEMIF
clock constant on OMAP-L138 even as PLL0 output changes
as ARM clock is changed to save power.

This patch has been tested on OMAP-L138.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

2 files changed, 78 insertions, 0 deletions

diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 5b0cb62a058f..01ba080433db 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -287,6 +287,79 @@ static unsigned long clk_sysclk_recalc(struct clk *clk)
         return rate;
 }
 
+int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate)
+{
+        unsigned v;
+        struct pll_data *pll;
+        unsigned long input;
+        unsigned ratio = 0;
+
+        /* If this is the PLL base clock, wrong function to call */
+        if (clk->pll_data)
+                return -EINVAL;
+
+        /* There must be a parent... */
+        if (WARN_ON(!clk->parent))
+                return -EINVAL;
+
+        /* ... the parent must be a PLL... */
+        if (WARN_ON(!clk->parent->pll_data))
+                return -EINVAL;
+
+        /* ... and this clock must have a divider. */
+        if (WARN_ON(!clk->div_reg))
+                return -EINVAL;
+
+        pll = clk->parent->pll_data;
+
+        input = clk->parent->rate;
+
+        /* If pre-PLL, source clock is before the multiplier and divider(s) */
+        if (clk->flags & PRE_PLL)
+                input = pll->input_rate;
+
+        if (input > rate) {
+                /*
+                 * Can afford to provide an output little higher than requested
+                 * only if maximum rate supported by hardware on this sysclk
+                 * is known.
+                 */
+                if (clk->maxrate) {
+                        ratio = DIV_ROUND_CLOSEST(input, rate);
+                        if (input / ratio > clk->maxrate)
+                                ratio = 0;
+                }
+
+                if (ratio == 0)
+                        ratio = DIV_ROUND_UP(input, rate);
+
+                ratio--;
+        }
+
+        if (ratio > PLLDIV_RATIO_MASK)
+                return -EINVAL;
+
+        do {
+                v = __raw_readl(pll->base + PLLSTAT);
+        } while (v & PLLSTAT_GOSTAT);
+
+        v = __raw_readl(pll->base + clk->div_reg);
+        v &= ~PLLDIV_RATIO_MASK;
+        v |= ratio | PLLDIV_EN;
+        __raw_writel(v, pll->base + clk->div_reg);
+
+        v = __raw_readl(pll->base + PLLCMD);
+        v |= PLLCMD_GOSET;
+        __raw_writel(v, pll->base + PLLCMD);
+
+        do {
+                v = __raw_readl(pll->base + PLLSTAT);
+        } while (v & PLLSTAT_GOSTAT);
+
+        return 0;
+}
+EXPORT_SYMBOL(davinci_set_sysclk_rate);
+
 static unsigned long clk_leafclk_recalc(struct clk *clk)
 {
         if (WARN_ON(!clk->parent))
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 01e36483ac3d..11099980b58b 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -70,6 +70,9 @@
 #include <linux/list.h>
 #include <asm/clkdev.h>
 
+#define PLLSTAT_GOSTAT  BIT(0)
+#define PLLCMD_GOSET    BIT(0)
+
 struct pll_data {
         u32 phys_base;
         void __iomem *base;
@@ -86,6 +89,7 @@ struct clk {
         struct module           *owner;
         const char              *name;
         unsigned long           rate;
+        unsigned long           maxrate;        /* H/W supported max rate */
         u8                      usecount;
         u8                      lpsc;
         u8                      gpsc;
@@ -118,6 +122,7 @@ struct clk {
 int davinci_clk_init(struct clk_lookup *clocks);
 int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
                                 unsigned int mult, unsigned int postdiv);
+int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate);
 
 extern struct platform_device davinci_wdt_device;
 extern void davinci_watchdog_reset(struct platform_device *);