[SCSI] sym53c8xx: Remove tag_ctrl module parameter

With sysfs making these options tunable at runtime, there's no
justification for keeping this horrendously complex specification
string around.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

3 files changed, 8 insertions, 80 deletions

diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt
index 3d9f06bb3d00..49ea5c58c6bc 100644
--- a/Documentation/scsi/sym53c8xx_2.txt
+++ b/Documentation/scsi/sym53c8xx_2.txt
@@ -449,25 +449,14 @@ options as above.
         cmd_per_lun=#tags (#tags > 1) tagged command queuing enabled
   #tags will be truncated to the max queued commands configuration parameter.
 
-10.2.2  Detailed control of tagged commands
-  This option allows you to specify a command queue depth for each device 
-  that supports tagged command queueing.
-  Example:
-      tag_ctrl=10/t2t3q16-t5q24/t1u2q32
-  will set devices queue depth as follow:
-      - controller #0 target #2 and target #3                  -> 16 commands,
-      - controller #0 target #5                                -> 24 commands,
-      - controller #1 target #1 logical unit #2                -> 32 commands,
-      - all other logical units (all targets, all controllers) -> 10 commands.
-
-10.2.3 Burst max
+10.2.2 Burst max
         burst=0    burst disabled
         burst=255  get burst length from initial IO register settings.
         burst=#x   burst enabled (1<<#x burst transfers max)
   #x is an integer value which is log base 2 of the burst transfers max.
   By default the driver uses the maximum value supported by the chip.
 
-10.2.4 LED support
+10.2.3 LED support
         led=1      enable  LED support
         led=0      disable LED support
   Do not enable LED support if your scsi board does not use SDMS BIOS.
@@ -560,9 +549,9 @@ Previously, the sym2 driver accepted arguments of the form
         sym53c8xx=tags:4,sync:10,debug:0x200
 
 As a result of the new module parameters, this is no longer available.
-Most of the options have remained the same, but tags has split into
-cmd_per_lun and tag_ctrl for its two different purposes.  The sample above
-would be specified as:
+Most of the options have remained the same, but tags has become
+cmd_per_lun to reflect its different purposes.  The sample above would
+be specified as:
         modprobe sym53c8xx cmd_per_lun=4 sync=10 debug=0x200
 
 or on the kernel boot line as:
diff --git a/drivers/scsi/sym53c8xx_2/sym53c8xx.h b/drivers/scsi/sym53c8xx_2/sym53c8xx.h
index 7519728dfc38..62d29cfac9e4 100644
--- a/drivers/scsi/sym53c8xx_2/sym53c8xx.h
+++ b/drivers/scsi/sym53c8xx_2/sym53c8xx.h
@@ -127,7 +127,6 @@ struct sym_driver_setup {
         u_char  settle_delay;
         u_char  use_nvram;
         u_long  excludes[8];
-        char    tag_ctrl[100];
 };
 
 #define SYM_SETUP_MAX_TAG               sym_driver_setup.max_tag
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 6e768c542225..c1d9f6989664 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -63,7 +63,6 @@ unsigned int sym_debug_flags = 0;
 static char *excl_string;
 static char *safe_string;
 module_param_named(cmd_per_lun, sym_driver_setup.max_tag, ushort, 0);
-module_param_string(tag_ctrl, sym_driver_setup.tag_ctrl, 100, 0);
 module_param_named(burst, sym_driver_setup.burst_order, byte, 0);
 module_param_named(led, sym_driver_setup.scsi_led, byte, 0);
 module_param_named(diff, sym_driver_setup.scsi_diff, byte, 0);
@@ -78,7 +77,6 @@ module_param_named(excl, excl_string, charp, 0);
 module_param_named(safe, safe_string, charp, 0);
 
 MODULE_PARM_DESC(cmd_per_lun, "The maximum number of tags to use by default");
-MODULE_PARM_DESC(tag_ctrl, "More detailed control over tags per LUN");
 MODULE_PARM_DESC(burst, "Maximum burst.  0 to disable, 255 to read from registers");
 MODULE_PARM_DESC(led, "Set to 1 to enable LED support");
 MODULE_PARM_DESC(diff, "0 for no differential mode, 1 for BIOS, 2 for always, 3 for not GPIO3");
@@ -744,59 +742,6 @@ static void sym_tune_dev_queuing(struct sym_tcb *tp, int lun, u_short reqtags)
         }
 }
 
-/*
- *  Linux select queue depths function
- */
-#define DEF_DEPTH       (sym_driver_setup.max_tag)
-#define ALL_TARGETS     -2
-#define NO_TARGET       -1
-#define ALL_LUNS        -2
-#define NO_LUN          -1
-
-static int device_queue_depth(struct sym_hcb *np, int target, int lun)
-{
-        int c, h, t, u, v;
-        char *p = sym_driver_setup.tag_ctrl;
-        char *ep;
-
-        h = -1;
-        t = NO_TARGET;
-        u = NO_LUN;
-        while ((c = *p++) != 0) {
-                v = simple_strtoul(p, &ep, 0);
-                switch(c) {
-                case '/':
-                        ++h;
-                        t = ALL_TARGETS;
-                        u = ALL_LUNS;
-                        break;
-                case 't':
-                        if (t != target)
-                                t = (target == v) ? v : NO_TARGET;
-                        u = ALL_LUNS;
-                        break;
-                case 'u':
-                        if (u != lun)
-                                u = (lun == v) ? v : NO_LUN;
-                        break;
-                case 'q':
-                        if (h == np->s.unit &&
-                                (t == ALL_TARGETS || t == target) &&
-                                (u == ALL_LUNS    || u == lun))
-                                return v;
-                        break;
-                case '-':
-                        t = ALL_TARGETS;
-                        u = ALL_LUNS;
-                        break;
-                default:
-                        break;
-                }
-                p = ep;
-        }
-        return DEF_DEPTH;
-}
-
 static int sym53c8xx_slave_alloc(struct scsi_device *sdev)
 {
         struct sym_hcb *np = sym_get_hcb(sdev->host);
@@ -861,21 +806,16 @@ static int sym53c8xx_slave_configure(struct scsi_device *sdev)
          *  Use at least 2.
          *  Donnot use more than our maximum.
          */
-        reqtags = device_queue_depth(np, sdev->id, sdev->lun);
+        reqtags = sym_driver_setup.max_tag;
         if (reqtags > tp->usrtags)
                 reqtags = tp->usrtags;
         if (!sdev->tagged_supported)
                 reqtags = 0;
-#if 1 /* Avoid to locally queue commands for no good reasons */
         if (reqtags > SYM_CONF_MAX_TAG)
                 reqtags = SYM_CONF_MAX_TAG;
-        depth_to_use = (reqtags ? reqtags : 2);
-#else
-        depth_to_use = (reqtags ? SYM_CONF_MAX_TAG : 2);
-#endif
+        depth_to_use = reqtags ? reqtags : 2;
         scsi_adjust_queue_depth(sdev,
-                                (sdev->tagged_supported ?
-                                 MSG_SIMPLE_TAG : 0),
+                                sdev->tagged_supported ? MSG_SIMPLE_TAG : 0,
                                 depth_to_use);
         lp->s.scdev_depth = depth_to_use;
         sym_tune_dev_queuing(tp, sdev->lun, reqtags);