powerpc/5200: Add mpc5200-spi (non-PSC) device driver

Adds support for the dedicated SPI device on the Freescale MPC5200(b)
SoC.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

4 files changed, 539 insertions, 0 deletions

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 4b6f7cba3b3d..2a4ba1993083 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -133,6 +133,14 @@ config SPI_LM70_LLP
           which interfaces to an LM70 temperature sensor using
           a parallel port.
 
+config SPI_MPC52xx
+        tristate "Freescale MPC52xx SPI (non-PSC) controller support"
+        depends on PPC_MPC52xx && SPI
+        select SPI_MASTER_OF
+        help
+          This drivers supports the MPC52xx SPI controller in master SPI
+          mode.
+
 config SPI_MPC52xx_PSC
         tristate "Freescale MPC52xx PSC SPI controller"
         depends on PPC_MPC52xx && EXPERIMENTAL
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 21a118269cac..e3f092a9afa5 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_SPI_OMAP24XX)		+= omap2_mcspi.o
 obj-$(CONFIG_SPI_ORION)                 += orion_spi.o
 obj-$(CONFIG_SPI_PL022)                 += amba-pl022.o
 obj-$(CONFIG_SPI_MPC52xx_PSC)           += mpc52xx_psc_spi.o
+obj-$(CONFIG_SPI_MPC52xx)               += mpc52xx_spi.o
 obj-$(CONFIG_SPI_MPC8xxx)               += spi_mpc8xxx.o
 obj-$(CONFIG_SPI_PPC4xx)                += spi_ppc4xx.o
 obj-$(CONFIG_SPI_S3C24XX_GPIO)          += spi_s3c24xx_gpio.o
diff --git a/drivers/spi/mpc52xx_spi.c b/drivers/spi/mpc52xx_spi.c
new file mode 100644
index 000000000000..ef8379b2c172
--- /dev/null
+++ b/drivers/spi/mpc52xx_spi.c
@@ -0,0 +1,520 @@
+/*
+ * MPC52xx SPI bus driver.
+ *
+ * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ *
+ * This file is released under the GPLv2
+ *
+ * This is the driver for the MPC5200's dedicated SPI controller.
+ *
+ * Note: this driver does not support the MPC5200 PSC in SPI mode.  For
+ * that driver see drivers/spi/mpc52xx_psc_spi.c
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/of_platform.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mpc52xx_spi.h>
+#include <linux/of_spi.h>
+#include <linux/io.h>
+#include <asm/time.h>
+#include <asm/mpc52xx.h>
+
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_DESCRIPTION("MPC52xx SPI (non-PSC) Driver");
+MODULE_LICENSE("GPL");
+
+/* Register offsets */
+#define SPI_CTRL1       0x00
+#define SPI_CTRL1_SPIE          (1 << 7)
+#define SPI_CTRL1_SPE           (1 << 6)
+#define SPI_CTRL1_MSTR          (1 << 4)
+#define SPI_CTRL1_CPOL          (1 << 3)
+#define SPI_CTRL1_CPHA          (1 << 2)
+#define SPI_CTRL1_SSOE          (1 << 1)
+#define SPI_CTRL1_LSBFE         (1 << 0)
+
+#define SPI_CTRL2       0x01
+#define SPI_BRR         0x04
+
+#define SPI_STATUS      0x05
+#define SPI_STATUS_SPIF         (1 << 7)
+#define SPI_STATUS_WCOL         (1 << 6)
+#define SPI_STATUS_MODF         (1 << 4)
+
+#define SPI_DATA        0x09
+#define SPI_PORTDATA    0x0d
+#define SPI_DATADIR     0x10
+
+/* FSM state return values */
+#define FSM_STOP        0       /* Nothing more for the state machine to */
+                                /* do.  If something interesting happens */
+                                /* then and IRQ will be received */
+#define FSM_POLL        1       /* need to poll for completion, an IRQ is */
+                                /* not expected */
+#define FSM_CONTINUE    2       /* Keep iterating the state machine */
+
+/* Driver internal data */
+struct mpc52xx_spi {
+        struct spi_master *master;
+        u32 sysclk;
+        void __iomem *regs;
+        int irq0;       /* MODF irq */
+        int irq1;       /* SPIF irq */
+        int ipb_freq;
+
+        /* Statistics */
+        int msg_count;
+        int wcol_count;
+        int wcol_ticks;
+        u32 wcol_tx_timestamp;
+        int modf_count;
+        int byte_count;
+
+        struct list_head queue;         /* queue of pending messages */
+        spinlock_t lock;
+        struct work_struct work;
+
+
+        /* Details of current transfer (length, and buffer pointers) */
+        struct spi_message *message;    /* current message */
+        struct spi_transfer *transfer;  /* current transfer */
+        int (*state)(int irq, struct mpc52xx_spi *ms, u8 status, u8 data);
+        int len;
+        int timestamp;
+        u8 *rx_buf;
+        const u8 *tx_buf;
+        int cs_change;
+};
+
+/*
+ * CS control function
+ */
+static void mpc52xx_spi_chipsel(struct mpc52xx_spi *ms, int value)
+{
+        out_8(ms->regs + SPI_PORTDATA, value ? 0 : 0x08);
+}
+
+/*
+ * Start a new transfer.  This is called both by the idle state
+ * for the first transfer in a message, and by the wait state when the
+ * previous transfer in a message is complete.
+ */
+static void mpc52xx_spi_start_transfer(struct mpc52xx_spi *ms)
+{
+        ms->rx_buf = ms->transfer->rx_buf;
+        ms->tx_buf = ms->transfer->tx_buf;
+        ms->len = ms->transfer->len;
+
+        /* Activate the chip select */
+        if (ms->cs_change)
+                mpc52xx_spi_chipsel(ms, 1);
+        ms->cs_change = ms->transfer->cs_change;
+
+        /* Write out the first byte */
+        ms->wcol_tx_timestamp = get_tbl();
+        if (ms->tx_buf)
+                out_8(ms->regs + SPI_DATA, *ms->tx_buf++);
+        else
+                out_8(ms->regs + SPI_DATA, 0);
+}
+
+/* Forward declaration of state handlers */
+static int mpc52xx_spi_fsmstate_transfer(int irq, struct mpc52xx_spi *ms,
+                                         u8 status, u8 data);
+static int mpc52xx_spi_fsmstate_wait(int irq, struct mpc52xx_spi *ms,
+                                     u8 status, u8 data);
+
+/*
+ * IDLE state
+ *
+ * No transfers are in progress; if another transfer is pending then retrieve
+ * it and kick it off.  Otherwise, stop processing the state machine
+ */
+static int
+mpc52xx_spi_fsmstate_idle(int irq, struct mpc52xx_spi *ms, u8 status, u8 data)
+{
+        struct spi_device *spi;
+        int spr, sppr;
+        u8 ctrl1;
+
+        if (status && (irq != NO_IRQ))
+                dev_err(&ms->master->dev, "spurious irq, status=0x%.2x\n",
+                        status);
+
+        /* Check if there is another transfer waiting. */
+        if (list_empty(&ms->queue))
+                return FSM_STOP;
+
+        /* get the head of the queue */
+        ms->message = list_first_entry(&ms->queue, struct spi_message, queue);
+        list_del_init(&ms->message->queue);
+
+        /* Setup the controller parameters */
+        ctrl1 = SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR;
+        spi = ms->message->spi;
+        if (spi->mode & SPI_CPHA)
+                ctrl1 |= SPI_CTRL1_CPHA;
+        if (spi->mode & SPI_CPOL)
+                ctrl1 |= SPI_CTRL1_CPOL;
+        if (spi->mode & SPI_LSB_FIRST)
+                ctrl1 |= SPI_CTRL1_LSBFE;
+        out_8(ms->regs + SPI_CTRL1, ctrl1);
+
+        /* Setup the controller speed */
+        /* minimum divider is '2'.  Also, add '1' to force rounding the
+         * divider up. */
+        sppr = ((ms->ipb_freq / ms->message->spi->max_speed_hz) + 1) >> 1;
+        spr = 0;
+        if (sppr < 1)
+                sppr = 1;
+        while (((sppr - 1) & ~0x7) != 0) {
+                sppr = (sppr + 1) >> 1; /* add '1' to force rounding up */
+                spr++;
+        }
+        sppr--;         /* sppr quantity in register is offset by 1 */
+        if (spr > 7) {
+                /* Don't overrun limits of SPI baudrate register */
+                spr = 7;
+                sppr = 7;
+        }
+        out_8(ms->regs + SPI_BRR, sppr << 4 | spr); /* Set speed */
+
+        ms->cs_change = 1;
+        ms->transfer = container_of(ms->message->transfers.next,
+                                    struct spi_transfer, transfer_list);
+
+        mpc52xx_spi_start_transfer(ms);
+        ms->state = mpc52xx_spi_fsmstate_transfer;
+
+        return FSM_CONTINUE;
+}
+
+/*
+ * TRANSFER state
+ *
+ * In the middle of a transfer.  If the SPI core has completed processing
+ * a byte, then read out the received data and write out the next byte
+ * (unless this transfer is finished; in which case go on to the wait
+ * state)
+ */
+static int mpc52xx_spi_fsmstate_transfer(int irq, struct mpc52xx_spi *ms,
+                                         u8 status, u8 data)
+{
+        if (!status)
+                return ms->irq0 ? FSM_STOP : FSM_POLL;
+
+        if (status & SPI_STATUS_WCOL) {
+                /* The SPI controller is stoopid.  At slower speeds, it may
+                 * raise the SPIF flag before the state machine is actually
+                 * finished, which causes a collision (internal to the state
+                 * machine only).  The manual recommends inserting a delay
+                 * between receiving the interrupt and sending the next byte,
+                 * but it can also be worked around simply by retrying the
+                 * transfer which is what we do here. */
+                ms->wcol_count++;
+                ms->wcol_ticks += get_tbl() - ms->wcol_tx_timestamp;
+                ms->wcol_tx_timestamp = get_tbl();
+                data = 0;
+                if (ms->tx_buf)
+                        data = *(ms->tx_buf-1);
+                out_8(ms->regs + SPI_DATA, data); /* try again */
+                return FSM_CONTINUE;
+        } else if (status & SPI_STATUS_MODF) {
+                ms->modf_count++;
+                dev_err(&ms->master->dev, "mode fault\n");
+                mpc52xx_spi_chipsel(ms, 0);
+                ms->message->status = -EIO;
+                ms->message->complete(ms->message->context);
+                ms->state = mpc52xx_spi_fsmstate_idle;
+                return FSM_CONTINUE;
+        }
+
+        /* Read data out of the spi device */
+        ms->byte_count++;
+        if (ms->rx_buf)
+                *ms->rx_buf++ = data;
+
+        /* Is the transfer complete? */
+        ms->len--;
+        if (ms->len == 0) {
+                ms->timestamp = get_tbl();
+                ms->timestamp += ms->transfer->delay_usecs * tb_ticks_per_usec;
+                ms->state = mpc52xx_spi_fsmstate_wait;
+                return FSM_CONTINUE;
+        }
+
+        /* Write out the next byte */
+        ms->wcol_tx_timestamp = get_tbl();
+        if (ms->tx_buf)
+                out_8(ms->regs + SPI_DATA, *ms->tx_buf++);
+        else
+                out_8(ms->regs + SPI_DATA, 0);
+
+        return FSM_CONTINUE;
+}
+
+/*
+ * WAIT state
+ *
+ * A transfer has completed; need to wait for the delay period to complete
+ * before starting the next transfer
+ */
+static int
+mpc52xx_spi_fsmstate_wait(int irq, struct mpc52xx_spi *ms, u8 status, u8 data)
+{
+        if (status && irq)
+                dev_err(&ms->master->dev, "spurious irq, status=0x%.2x\n",
+                        status);
+
+        if (((int)get_tbl()) - ms->timestamp < 0)
+                return FSM_POLL;
+
+        ms->message->actual_length += ms->transfer->len;
+
+        /* Check if there is another transfer in this message.  If there
+         * aren't then deactivate CS, notify sender, and drop back to idle
+         * to start the next message. */
+        if (ms->transfer->transfer_list.next == &ms->message->transfers) {
+                ms->msg_count++;
+                mpc52xx_spi_chipsel(ms, 0);
+                ms->message->status = 0;
+                ms->message->complete(ms->message->context);
+                ms->state = mpc52xx_spi_fsmstate_idle;
+                return FSM_CONTINUE;
+        }
+
+        /* There is another transfer; kick it off */
+
+        if (ms->cs_change)
+                mpc52xx_spi_chipsel(ms, 0);
+
+        ms->transfer = container_of(ms->transfer->transfer_list.next,
+                                    struct spi_transfer, transfer_list);
+        mpc52xx_spi_start_transfer(ms);
+        ms->state = mpc52xx_spi_fsmstate_transfer;
+        return FSM_CONTINUE;
+}
+
+/**
+ * mpc52xx_spi_fsm_process - Finite State Machine iteration function
+ * @irq: irq number that triggered the FSM or 0 for polling
+ * @ms: pointer to mpc52xx_spi driver data
+ */
+static void mpc52xx_spi_fsm_process(int irq, struct mpc52xx_spi *ms)
+{
+        int rc = FSM_CONTINUE;
+        u8 status, data;
+
+        while (rc == FSM_CONTINUE) {
+                /* Interrupt cleared by read of STATUS followed by
+                 * read of DATA registers */
+                status = in_8(ms->regs + SPI_STATUS);
+                data = in_8(ms->regs + SPI_DATA);
+                rc = ms->state(irq, ms, status, data);
+        }
+
+        if (rc == FSM_POLL)
+                schedule_work(&ms->work);
+}
+
+/**
+ * mpc52xx_spi_irq - IRQ handler
+ */
+static irqreturn_t mpc52xx_spi_irq(int irq, void *_ms)
+{
+        struct mpc52xx_spi *ms = _ms;
+        spin_lock(&ms->lock);
+        mpc52xx_spi_fsm_process(irq, ms);
+        spin_unlock(&ms->lock);
+        return IRQ_HANDLED;
+}
+
+/**
+ * mpc52xx_spi_wq - Workqueue function for polling the state machine
+ */
+static void mpc52xx_spi_wq(struct work_struct *work)
+{
+        struct mpc52xx_spi *ms = container_of(work, struct mpc52xx_spi, work);
+        unsigned long flags;
+
+        spin_lock_irqsave(&ms->lock, flags);
+        mpc52xx_spi_fsm_process(0, ms);
+        spin_unlock_irqrestore(&ms->lock, flags);
+}
+
+/*
+ * spi_master ops
+ */
+
+static int mpc52xx_spi_setup(struct spi_device *spi)
+{
+        if (spi->bits_per_word % 8)
+                return -EINVAL;
+
+        if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST))
+                return -EINVAL;
+
+        if (spi->chip_select >= spi->master->num_chipselect)
+                return -EINVAL;
+
+        return 0;
+}
+
+static int mpc52xx_spi_transfer(struct spi_device *spi, struct spi_message *m)
+{
+        struct mpc52xx_spi *ms = spi_master_get_devdata(spi->master);
+        unsigned long flags;
+
+        m->actual_length = 0;
+        m->status = -EINPROGRESS;
+
+        spin_lock_irqsave(&ms->lock, flags);
+        list_add_tail(&m->queue, &ms->queue);
+        spin_unlock_irqrestore(&ms->lock, flags);
+        schedule_work(&ms->work);
+
+        return 0;
+}
+
+/*
+ * OF Platform Bus Binding
+ */
+static int __devinit mpc52xx_spi_probe(struct of_device *op,
+                                       const struct of_device_id *match)
+{
+        struct spi_master *master;
+        struct mpc52xx_spi *ms;
+        void __iomem *regs;
+        int rc;
+
+        /* MMIO registers */
+        dev_dbg(&op->dev, "probing mpc5200 SPI device\n");
+        regs = of_iomap(op->node, 0);
+        if (!regs)
+                return -ENODEV;
+
+        /* initialize the device */
+        out_8(regs+SPI_CTRL1, SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR);
+        out_8(regs + SPI_CTRL2, 0x0);
+        out_8(regs + SPI_DATADIR, 0xe); /* Set output pins */
+        out_8(regs + SPI_PORTDATA, 0x8);        /* Deassert /SS signal */
+
+        /* Clear the status register and re-read it to check for a MODF
+         * failure.  This driver cannot currently handle multiple masters
+         * on the SPI bus.  This fault will also occur if the SPI signals
+         * are not connected to any pins (port_config setting) */
+        in_8(regs + SPI_STATUS);
+        in_8(regs + SPI_DATA);
+        if (in_8(regs + SPI_STATUS) & SPI_STATUS_MODF) {
+                dev_err(&op->dev, "mode fault; is port_config correct?\n");
+                rc = -EIO;
+                goto err_init;
+        }
+
+        dev_dbg(&op->dev, "allocating spi_master struct\n");
+        master = spi_alloc_master(&op->dev, sizeof *ms);
+        if (!master) {
+                rc = -ENOMEM;
+                goto err_alloc;
+        }
+        master->bus_num = -1;
+        master->num_chipselect = 1;
+        master->setup = mpc52xx_spi_setup;
+        master->transfer = mpc52xx_spi_transfer;
+        dev_set_drvdata(&op->dev, master);
+
+        ms = spi_master_get_devdata(master);
+        ms->master = master;
+        ms->regs = regs;
+        ms->irq0 = irq_of_parse_and_map(op->node, 0);
+        ms->irq1 = irq_of_parse_and_map(op->node, 1);
+        ms->state = mpc52xx_spi_fsmstate_idle;
+        ms->ipb_freq = mpc5xxx_get_bus_frequency(op->node);
+        spin_lock_init(&ms->lock);
+        INIT_LIST_HEAD(&ms->queue);
+        INIT_WORK(&ms->work, mpc52xx_spi_wq);
+
+        /* Decide if interrupts can be used */
+        if (ms->irq0 && ms->irq1) {
+                rc = request_irq(ms->irq0, mpc52xx_spi_irq, IRQF_SAMPLE_RANDOM,
+                                  "mpc5200-spi-modf", ms);
+                rc |= request_irq(ms->irq1, mpc52xx_spi_irq, IRQF_SAMPLE_RANDOM,
+                                  "mpc5200-spi-spiF", ms);
+                if (rc) {
+                        free_irq(ms->irq0, ms);
+                        free_irq(ms->irq1, ms);
+                        ms->irq0 = ms->irq1 = 0;
+                }
+        } else {
+                /* operate in polled mode */
+                ms->irq0 = ms->irq1 = 0;
+        }
+
+        if (!ms->irq0)
+                dev_info(&op->dev, "using polled mode\n");
+
+        dev_dbg(&op->dev, "registering spi_master struct\n");
+        rc = spi_register_master(master);
+        if (rc)
+                goto err_register;
+
+        of_register_spi_devices(master, op->node);
+        dev_info(&ms->master->dev, "registered MPC5200 SPI bus\n");
+
+        return rc;
+
+ err_register:
+        dev_err(&ms->master->dev, "initialization failed\n");
+        spi_master_put(master);
+ err_alloc:
+ err_init:
+        iounmap(regs);
+        return rc;
+}
+
+static int __devexit mpc52xx_spi_remove(struct of_device *op)
+{
+        struct spi_master *master = dev_get_drvdata(&op->dev);
+        struct mpc52xx_spi *ms = spi_master_get_devdata(master);
+
+        free_irq(ms->irq0, ms);
+        free_irq(ms->irq1, ms);
+
+        spi_unregister_master(master);
+        spi_master_put(master);
+        iounmap(ms->regs);
+
+        return 0;
+}
+
+static struct of_device_id mpc52xx_spi_match[] __devinitdata = {
+        { .compatible = "fsl,mpc5200-spi", },
+        {}
+};
+MODULE_DEVICE_TABLE(of, mpc52xx_spi_match);
+
+static struct of_platform_driver mpc52xx_spi_of_driver = {
+        .owner = THIS_MODULE,
+        .name = "mpc52xx-spi",
+        .match_table = mpc52xx_spi_match,
+        .probe = mpc52xx_spi_probe,
+        .remove = __exit_p(mpc52xx_spi_remove),
+};
+
+static int __init mpc52xx_spi_init(void)
+{
+        return of_register_platform_driver(&mpc52xx_spi_of_driver);
+}
+module_init(mpc52xx_spi_init);
+
+static void __exit mpc52xx_spi_exit(void)
+{
+        of_unregister_platform_driver(&mpc52xx_spi_of_driver);
+}
+module_exit(mpc52xx_spi_exit);
+
diff --git a/include/linux/spi/mpc52xx_spi.h b/include/linux/spi/mpc52xx_spi.h
new file mode 100644
index 000000000000..d1004cf09241
--- /dev/null
+++ b/include/linux/spi/mpc52xx_spi.h
@@ -0,0 +1,10 @@
+
+#ifndef INCLUDE_MPC5200_SPI_H
+#define INCLUDE_MPC5200_SPI_H
+
+extern void mpc52xx_spi_set_premessage_hook(struct spi_master *master,
+                                            void (*hook)(struct spi_message *m,
+                                                         void *context),
+                                            void *hook_context);
+
+#endif