diff options
author | Mike Frysinger <vapier@gentoo.org> | 2009-08-13 00:27:31 -0400 |
---|---|---|
committer | Mike Frysinger <vapier@gentoo.org> | 2009-09-16 22:10:24 -0400 |
commit | 0198b3bcaed1374f454e56e46f0e1ca1fc24e0a1 (patch) | |
tree | 883a78de3ff7c1b560ebf18cc6c78e9a7065431f | |
parent | c4baebf2683d16f24a84a99268ef5f7318905337 (diff) |
Blackfin: drop board resources for dead devices (pbx/ad9960)
These hardware devices are dead and the drivers never cleaned up/merged,
so punt the useless board resource info.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
-rw-r--r-- | arch/blackfin/mach-bf518/boards/ezbrd.c | 27 | ||||
-rw-r--r-- | arch/blackfin/mach-bf527/boards/cm_bf527.c | 43 | ||||
-rw-r--r-- | arch/blackfin/mach-bf527/boards/ezbrd.c | 27 | ||||
-rw-r--r-- | arch/blackfin/mach-bf527/boards/ezkit.c | 43 | ||||
-rw-r--r-- | arch/blackfin/mach-bf533/boards/H8606.c | 26 | ||||
-rw-r--r-- | arch/blackfin/mach-bf533/boards/stamp.c | 28 | ||||
-rw-r--r-- | arch/blackfin/mach-bf537/boards/cm_bf537.c | 17 | ||||
-rw-r--r-- | arch/blackfin/mach-bf537/boards/pnav10.c | 16 | ||||
-rw-r--r-- | arch/blackfin/mach-bf537/boards/stamp.c | 44 | ||||
-rw-r--r-- | arch/blackfin/mach-bf537/boards/tcm_bf537.c | 17 | ||||
-rw-r--r-- | arch/blackfin/mach-bf561/boards/cm_bf561.c | 16 |
11 files changed, 0 insertions, 304 deletions
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 4c594e647eb4..03e4a9941f01 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c | |||
@@ -199,15 +199,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { | |||
199 | }; | 199 | }; |
200 | #endif | 200 | #endif |
201 | 201 | ||
202 | #if defined(CONFIG_PBX) | ||
203 | static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { | ||
204 | .ctl_reg = 0x4, /* send zero */ | ||
205 | .enable_dma = 0, | ||
206 | .bits_per_word = 8, | ||
207 | .cs_change_per_word = 1, | ||
208 | }; | ||
209 | #endif | ||
210 | |||
211 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | 202 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
212 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { | 203 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { |
213 | .enable_dma = 0, | 204 | .enable_dma = 0, |
@@ -296,24 +287,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { | |||
296 | .mode = SPI_MODE_3, | 287 | .mode = SPI_MODE_3, |
297 | }, | 288 | }, |
298 | #endif | 289 | #endif |
299 | #if defined(CONFIG_PBX) | ||
300 | { | ||
301 | .modalias = "fxs-spi", | ||
302 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | ||
303 | .bus_num = 0, | ||
304 | .chip_select = 8 - CONFIG_J11_JUMPER, | ||
305 | .controller_data = &spi_si3xxx_chip_info, | ||
306 | .mode = SPI_MODE_3, | ||
307 | }, | ||
308 | { | ||
309 | .modalias = "fxo-spi", | ||
310 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | ||
311 | .bus_num = 0, | ||
312 | .chip_select = 8 - CONFIG_J19_JUMPER, | ||
313 | .controller_data = &spi_si3xxx_chip_info, | ||
314 | .mode = SPI_MODE_3, | ||
315 | }, | ||
316 | #endif | ||
317 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | 290 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
318 | { | 291 | { |
319 | .modalias = "ad7877", | 292 | .modalias = "ad7877", |
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 18b9bd7d7d64..fdd518c1b87b 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c | |||
@@ -495,13 +495,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { | |||
495 | }; | 495 | }; |
496 | #endif | 496 | #endif |
497 | 497 | ||
498 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | ||
499 | static struct bfin5xx_spi_chip ad9960_spi_chip_info = { | ||
500 | .enable_dma = 0, | ||
501 | .bits_per_word = 16, | ||
502 | }; | ||
503 | #endif | ||
504 | |||
505 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) | 498 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) |
506 | static struct bfin5xx_spi_chip mmc_spi_chip_info = { | 499 | static struct bfin5xx_spi_chip mmc_spi_chip_info = { |
507 | .enable_dma = 0, | 500 | .enable_dma = 0, |
@@ -509,15 +502,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { | |||
509 | }; | 502 | }; |
510 | #endif | 503 | #endif |
511 | 504 | ||
512 | #if defined(CONFIG_PBX) | ||
513 | static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { | ||
514 | .ctl_reg = 0x4, /* send zero */ | ||
515 | .enable_dma = 0, | ||
516 | .bits_per_word = 8, | ||
517 | .cs_change_per_word = 1, | ||
518 | }; | ||
519 | #endif | ||
520 | |||
521 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | 505 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
522 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { | 506 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { |
523 | .enable_dma = 0, | 507 | .enable_dma = 0, |
@@ -591,15 +575,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { | |||
591 | .controller_data = &ad1836_spi_chip_info, | 575 | .controller_data = &ad1836_spi_chip_info, |
592 | }, | 576 | }, |
593 | #endif | 577 | #endif |
594 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | ||
595 | { | ||
596 | .modalias = "ad9960-spi", | ||
597 | .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ | ||
598 | .bus_num = 0, | ||
599 | .chip_select = 1, | ||
600 | .controller_data = &ad9960_spi_chip_info, | ||
601 | }, | ||
602 | #endif | ||
603 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) | 578 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) |
604 | { | 579 | { |
605 | .modalias = "mmc_spi", | 580 | .modalias = "mmc_spi", |
@@ -610,24 +585,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { | |||
610 | .mode = SPI_MODE_3, | 585 | .mode = SPI_MODE_3, |
611 | }, | 586 | }, |
612 | #endif | 587 | #endif |
613 | #if defined(CONFIG_PBX) | ||
614 | { | ||
615 | .modalias = "fxs-spi", | ||
616 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | ||
617 | .bus_num = 0, | ||
618 | .chip_select = 8 - CONFIG_J11_JUMPER, | ||
619 | .controller_data = &spi_si3xxx_chip_info, | ||
620 | .mode = SPI_MODE_3, | ||
621 | }, | ||
622 | { | ||
623 | .modalias = "fxo-spi", | ||
624 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | ||
625 | .bus_num = 0, | ||
626 | .chip_select = 8 - CONFIG_J19_JUMPER, | ||
627 | .controller_data = &spi_si3xxx_chip_info, | ||
628 | .mode = SPI_MODE_3, | ||
629 | }, | ||
630 | #endif | ||
631 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | 588 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
632 | { | 589 | { |
633 | .modalias = "ad7877", | 590 | .modalias = "ad7877", |
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 809c7907b6e3..68b4c804364c 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c | |||
@@ -263,15 +263,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { | |||
263 | }; | 263 | }; |
264 | #endif | 264 | #endif |
265 | 265 | ||
266 | #if defined(CONFIG_PBX) | ||
267 | static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { | ||
268 | .ctl_reg = 0x4, /* send zero */ | ||
269 | .enable_dma = 0, | ||
270 | .bits_per_word = 8, | ||
271 | .cs_change_per_word = 1, | ||
272 | }; | ||
273 | #endif | ||
274 | |||
275 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | 266 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
276 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { | 267 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { |
277 | .enable_dma = 0, | 268 | .enable_dma = 0, |
@@ -376,24 +367,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { | |||
376 | .mode = SPI_MODE_3, | 367 | .mode = SPI_MODE_3, |
377 | }, | 368 | }, |
378 | #endif | 369 | #endif |
379 | #if defined(CONFIG_PBX) | ||
380 | { | ||
381 | .modalias = "fxs-spi", | ||
382 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | ||
383 | .bus_num = 0, | ||
384 | .chip_select = 8 - CONFIG_J11_JUMPER, | ||
385 | .controller_data = &spi_si3xxx_chip_info, | ||
386 | .mode = SPI_MODE_3, | ||
387 | }, | ||
388 | { | ||
389 | .modalias = "fxo-spi", | ||
390 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | ||
391 | .bus_num = 0, | ||
392 | .chip_select = 8 - CONFIG_J19_JUMPER, | ||
393 | .controller_data = &spi_si3xxx_chip_info, | ||
394 | .mode = SPI_MODE_3, | ||
395 | }, | ||
396 | #endif | ||
397 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | 370 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
398 | { | 371 | { |
399 | .modalias = "ad7877", | 372 | .modalias = "ad7877", |
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 617a28738438..4ab9cfa74fdd 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c | |||
@@ -512,13 +512,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { | |||
512 | }; | 512 | }; |
513 | #endif | 513 | #endif |
514 | 514 | ||
515 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | ||
516 | static struct bfin5xx_spi_chip ad9960_spi_chip_info = { | ||
517 | .enable_dma = 0, | ||
518 | .bits_per_word = 16, | ||
519 | }; | ||
520 | #endif | ||
521 | |||
522 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) | 515 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) |
523 | static struct bfin5xx_spi_chip mmc_spi_chip_info = { | 516 | static struct bfin5xx_spi_chip mmc_spi_chip_info = { |
524 | .enable_dma = 0, | 517 | .enable_dma = 0, |
@@ -526,15 +519,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { | |||
526 | }; | 519 | }; |
527 | #endif | 520 | #endif |
528 | 521 | ||
529 | #if defined(CONFIG_PBX) | ||
530 | static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { | ||
531 | .ctl_reg = 0x4, /* send zero */ | ||
532 | .enable_dma = 0, | ||
533 | .bits_per_word = 8, | ||
534 | .cs_change_per_word = 1, | ||
535 | }; | ||
536 | #endif | ||
537 | |||
538 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | 522 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
539 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { | 523 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { |
540 | .enable_dma = 0, | 524 | .enable_dma = 0, |
@@ -632,15 +616,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { | |||
632 | .controller_data = &ad1836_spi_chip_info, | 616 | .controller_data = &ad1836_spi_chip_info, |
633 | }, | 617 | }, |
634 | #endif | 618 | #endif |
635 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | ||
636 | { | ||
637 | .modalias = "ad9960-spi", | ||
638 | .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ | ||
639 | .bus_num = 0, | ||
640 | .chip_select = 1, | ||
641 | .controller_data = &ad9960_spi_chip_info, | ||
642 | }, | ||
643 | #endif | ||
644 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) | 619 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) |
645 | { | 620 | { |
646 | .modalias = "mmc_spi", | 621 | .modalias = "mmc_spi", |
@@ -652,24 +627,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { | |||
652 | }, | 627 | }, |
653 | #endif | 628 | #endif |
654 | 629 | ||
655 | #if defined(CONFIG_PBX) | ||
656 | { | ||
657 | .modalias = "fxs-spi", | ||
658 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | ||
659 | .bus_num = 0, | ||
660 | .chip_select = 8 - CONFIG_J11_JUMPER, | ||
661 | .controller_data = &spi_si3xxx_chip_info, | ||
662 | .mode = SPI_MODE_3, | ||
663 | }, | ||
664 | { | ||
665 | .modalias = "fxo-spi", | ||
666 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | ||
667 | .bus_num = 0, | ||
668 | .chip_select = 8 - CONFIG_J19_JUMPER, | ||
669 | .controller_data = &spi_si3xxx_chip_info, | ||
670 | .mode = SPI_MODE_3, | ||
671 | }, | ||
672 | #endif | ||
673 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | 630 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
674 | { | 631 | { |
675 | .modalias = "ad7877", | 632 | .modalias = "ad7877", |
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 1bd8b61e6888..30ff3c4a3abe 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c | |||
@@ -201,15 +201,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { | |||
201 | }; | 201 | }; |
202 | #endif | 202 | #endif |
203 | 203 | ||
204 | #if defined(CONFIG_PBX) | ||
205 | static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { | ||
206 | .ctl_reg = 0x1c04, | ||
207 | .enable_dma = 0, | ||
208 | .bits_per_word = 8, | ||
209 | .cs_change_per_word = 1, | ||
210 | }; | ||
211 | #endif | ||
212 | |||
213 | /* Notice: for blackfin, the speed_hz is the value of register | 204 | /* Notice: for blackfin, the speed_hz is the value of register |
214 | * SPI_BAUD, not the real baudrate */ | 205 | * SPI_BAUD, not the real baudrate */ |
215 | static struct spi_board_info bfin_spi_board_info[] __initdata = { | 206 | static struct spi_board_info bfin_spi_board_info[] __initdata = { |
@@ -248,23 +239,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { | |||
248 | }, | 239 | }, |
249 | #endif | 240 | #endif |
250 | 241 | ||
251 | #if defined(CONFIG_PBX) | ||
252 | { | ||
253 | .modalias = "fxs-spi", | ||
254 | .max_speed_hz = 4, | ||
255 | .bus_num = 1, | ||
256 | .chip_select = 3, | ||
257 | .controller_data = &spi_si3xxx_chip_info, | ||
258 | }, | ||
259 | |||
260 | { | ||
261 | .modalias = "fxo-spi", | ||
262 | .max_speed_hz = 4, | ||
263 | .bus_num = 1, | ||
264 | .chip_select = 2, | ||
265 | .controller_data = &spi_si3xxx_chip_info, | ||
266 | }, | ||
267 | #endif | ||
268 | }; | 242 | }; |
269 | 243 | ||
270 | /* SPI (0) */ | 244 | /* SPI (0) */ |
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index f3dc2830631c..3954baa00c64 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c | |||
@@ -219,15 +219,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { | |||
219 | }; | 219 | }; |
220 | #endif | 220 | #endif |
221 | 221 | ||
222 | #if defined(CONFIG_PBX) | ||
223 | static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { | ||
224 | .ctl_reg = 0x4, /* send zero */ | ||
225 | .enable_dma = 0, | ||
226 | .bits_per_word = 8, | ||
227 | .cs_change_per_word = 1, | ||
228 | }; | ||
229 | #endif | ||
230 | |||
231 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) | 222 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) |
232 | static struct bfin5xx_spi_chip spidev_chip_info = { | 223 | static struct bfin5xx_spi_chip spidev_chip_info = { |
233 | .enable_dma = 0, | 224 | .enable_dma = 0, |
@@ -298,25 +289,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { | |||
298 | }, | 289 | }, |
299 | #endif | 290 | #endif |
300 | 291 | ||
301 | #if defined(CONFIG_PBX) | ||
302 | { | ||
303 | .modalias = "fxs-spi", | ||
304 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | ||
305 | .bus_num = 0, | ||
306 | .chip_select = 8 - CONFIG_J11_JUMPER, | ||
307 | .controller_data = &spi_si3xxx_chip_info, | ||
308 | .mode = SPI_MODE_3, | ||
309 | }, | ||
310 | { | ||
311 | .modalias = "fxo-spi", | ||
312 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | ||
313 | .bus_num = 0, | ||
314 | .chip_select = 8 - CONFIG_J19_JUMPER, | ||
315 | .controller_data = &spi_si3xxx_chip_info, | ||
316 | .mode = SPI_MODE_3, | ||
317 | }, | ||
318 | #endif | ||
319 | |||
320 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) | 292 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) |
321 | { | 293 | { |
322 | .modalias = "spidev", | 294 | .modalias = "spidev", |
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index 3681d2cb40b3..159e5b2f9e6b 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c | |||
@@ -101,13 +101,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { | |||
101 | }; | 101 | }; |
102 | #endif | 102 | #endif |
103 | 103 | ||
104 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | ||
105 | static struct bfin5xx_spi_chip ad9960_spi_chip_info = { | ||
106 | .enable_dma = 0, | ||
107 | .bits_per_word = 16, | ||
108 | }; | ||
109 | #endif | ||
110 | |||
111 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) | 104 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) |
112 | static struct bfin5xx_spi_chip mmc_spi_chip_info = { | 105 | static struct bfin5xx_spi_chip mmc_spi_chip_info = { |
113 | .enable_dma = 0, | 106 | .enable_dma = 0, |
@@ -150,16 +143,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { | |||
150 | }, | 143 | }, |
151 | #endif | 144 | #endif |
152 | 145 | ||
153 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | ||
154 | { | ||
155 | .modalias = "ad9960-spi", | ||
156 | .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ | ||
157 | .bus_num = 0, | ||
158 | .chip_select = 1, | ||
159 | .controller_data = &ad9960_spi_chip_info, | ||
160 | }, | ||
161 | #endif | ||
162 | |||
163 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) | 146 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) |
164 | { | 147 | { |
165 | .modalias = "mmc_spi", | 148 | .modalias = "mmc_spi", |
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 3bbe10227bfb..0d93bbe6d275 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c | |||
@@ -293,13 +293,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { | |||
293 | }; | 293 | }; |
294 | #endif | 294 | #endif |
295 | 295 | ||
296 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | ||
297 | static struct bfin5xx_spi_chip ad9960_spi_chip_info = { | ||
298 | .enable_dma = 0, | ||
299 | .bits_per_word = 16, | ||
300 | }; | ||
301 | #endif | ||
302 | |||
303 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) | 296 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) |
304 | static struct bfin5xx_spi_chip mmc_spi_chip_info = { | 297 | static struct bfin5xx_spi_chip mmc_spi_chip_info = { |
305 | .enable_dma = 0, | 298 | .enable_dma = 0, |
@@ -366,15 +359,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { | |||
366 | .controller_data = &ad1836_spi_chip_info, | 359 | .controller_data = &ad1836_spi_chip_info, |
367 | }, | 360 | }, |
368 | #endif | 361 | #endif |
369 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | ||
370 | { | ||
371 | .modalias = "ad9960-spi", | ||
372 | .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ | ||
373 | .bus_num = 0, | ||
374 | .chip_select = 1, | ||
375 | .controller_data = &ad9960_spi_chip_info, | ||
376 | }, | ||
377 | #endif | ||
378 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) | 362 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) |
379 | { | 363 | { |
380 | .modalias = "mmc_spi", | 364 | .modalias = "mmc_spi", |
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index d438ca40bc12..d5aabeeb81ee 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c | |||
@@ -549,13 +549,6 @@ static struct bfin5xx_spi_chip ad1938_spi_chip_info = { | |||
549 | }; | 549 | }; |
550 | #endif | 550 | #endif |
551 | 551 | ||
552 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | ||
553 | static struct bfin5xx_spi_chip ad9960_spi_chip_info = { | ||
554 | .enable_dma = 0, | ||
555 | .bits_per_word = 16, | ||
556 | }; | ||
557 | #endif | ||
558 | |||
559 | #if defined(CONFIG_INPUT_EVAL_AD7147EBZ) | 552 | #if defined(CONFIG_INPUT_EVAL_AD7147EBZ) |
560 | #include <linux/input.h> | 553 | #include <linux/input.h> |
561 | #include <linux/input/ad714x.h> | 554 | #include <linux/input/ad714x.h> |
@@ -698,15 +691,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { | |||
698 | }; | 691 | }; |
699 | #endif | 692 | #endif |
700 | 693 | ||
701 | #if defined(CONFIG_PBX) | ||
702 | static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { | ||
703 | .ctl_reg = 0x4, /* send zero */ | ||
704 | .enable_dma = 0, | ||
705 | .bits_per_word = 8, | ||
706 | .cs_change_per_word = 1, | ||
707 | }; | ||
708 | #endif | ||
709 | |||
710 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | 694 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
711 | #include <linux/spi/ad7877.h> | 695 | #include <linux/spi/ad7877.h> |
712 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { | 696 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { |
@@ -906,16 +890,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { | |||
906 | }, | 890 | }, |
907 | #endif | 891 | #endif |
908 | 892 | ||
909 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | ||
910 | { | ||
911 | .modalias = "ad9960-spi", | ||
912 | .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ | ||
913 | .bus_num = 0, | ||
914 | .chip_select = 1, | ||
915 | .controller_data = &ad9960_spi_chip_info, | ||
916 | }, | ||
917 | #endif | ||
918 | |||
919 | #if defined(CONFIG_INPUT_EVAL_AD7147EBZ) | 893 | #if defined(CONFIG_INPUT_EVAL_AD7147EBZ) |
920 | { | 894 | { |
921 | .modalias = "ad714x_captouch", | 895 | .modalias = "ad714x_captouch", |
@@ -940,24 +914,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { | |||
940 | .mode = SPI_MODE_3, | 914 | .mode = SPI_MODE_3, |
941 | }, | 915 | }, |
942 | #endif | 916 | #endif |
943 | #if defined(CONFIG_PBX) | ||
944 | { | ||
945 | .modalias = "fxs-spi", | ||
946 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | ||
947 | .bus_num = 0, | ||
948 | .chip_select = 8 - CONFIG_J11_JUMPER, | ||
949 | .controller_data = &spi_si3xxx_chip_info, | ||
950 | .mode = SPI_MODE_3, | ||
951 | }, | ||
952 | { | ||
953 | .modalias = "fxo-spi", | ||
954 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | ||
955 | .bus_num = 0, | ||
956 | .chip_select = 8 - CONFIG_J19_JUMPER, | ||
957 | .controller_data = &spi_si3xxx_chip_info, | ||
958 | .mode = SPI_MODE_3, | ||
959 | }, | ||
960 | #endif | ||
961 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | 917 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
962 | { | 918 | { |
963 | .modalias = "ad7877", | 919 | .modalias = "ad7877", |
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 97a86b4ce96d..88eade89842e 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c | |||
@@ -101,13 +101,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { | |||
101 | }; | 101 | }; |
102 | #endif | 102 | #endif |
103 | 103 | ||
104 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | ||
105 | static struct bfin5xx_spi_chip ad9960_spi_chip_info = { | ||
106 | .enable_dma = 0, | ||
107 | .bits_per_word = 16, | ||
108 | }; | ||
109 | #endif | ||
110 | |||
111 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) | 104 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) |
112 | static struct bfin5xx_spi_chip mmc_spi_chip_info = { | 105 | static struct bfin5xx_spi_chip mmc_spi_chip_info = { |
113 | .enable_dma = 0, | 106 | .enable_dma = 0, |
@@ -150,16 +143,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { | |||
150 | }, | 143 | }, |
151 | #endif | 144 | #endif |
152 | 145 | ||
153 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | ||
154 | { | ||
155 | .modalias = "ad9960-spi", | ||
156 | .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ | ||
157 | .bus_num = 0, | ||
158 | .chip_select = 1, | ||
159 | .controller_data = &ad9960_spi_chip_info, | ||
160 | }, | ||
161 | #endif | ||
162 | |||
163 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) | 146 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) |
164 | { | 147 | { |
165 | .modalias = "mmc_spi", | 148 | .modalias = "mmc_spi", |
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index ebb07554fb09..cedcc3c6b235 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c | |||
@@ -98,13 +98,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { | |||
98 | }; | 98 | }; |
99 | #endif | 99 | #endif |
100 | 100 | ||
101 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | ||
102 | static struct bfin5xx_spi_chip ad9960_spi_chip_info = { | ||
103 | .enable_dma = 0, | ||
104 | .bits_per_word = 16, | ||
105 | }; | ||
106 | #endif | ||
107 | |||
108 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) | 101 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) |
109 | static struct bfin5xx_spi_chip mmc_spi_chip_info = { | 102 | static struct bfin5xx_spi_chip mmc_spi_chip_info = { |
110 | .enable_dma = 0, | 103 | .enable_dma = 0, |
@@ -146,15 +139,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { | |||
146 | .controller_data = &ad1836_spi_chip_info, | 139 | .controller_data = &ad1836_spi_chip_info, |
147 | }, | 140 | }, |
148 | #endif | 141 | #endif |
149 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | ||
150 | { | ||
151 | .modalias = "ad9960-spi", | ||
152 | .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ | ||
153 | .bus_num = 0, | ||
154 | .chip_select = 1, | ||
155 | .controller_data = &ad9960_spi_chip_info, | ||
156 | }, | ||
157 | #endif | ||
158 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) | 142 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) |
159 | { | 143 | { |
160 | .modalias = "mmc_spi", | 144 | .modalias = "mmc_spi", |