Input: add driver for EETI touchpanels

This patch adds a driver for EETI's I2C connected touchscreens.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Tested-by: Sven Neumann <s.neumann@raumfeld.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

3 files changed, 296 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 82c388e0fe3e..1b4a1675cbc8 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -111,6 +111,15 @@ config TOUCHSCREEN_DA9034
           Say Y here to enable the support for the touchscreen found
           on Dialog Semiconductor DA9034 PMIC.
 
+config TOUCHSCREEN_EETI
+        tristate "EETI touchscreen panel support"
+        depends on I2C
+        help
+          Say Y here to enable support for I2C connected EETI touch panels.
+
+          To compile this driver as a module, choose M here: the
+          module will be called eeti_ts.
+
 config TOUCHSCREEN_FUJITSU
         tristate "Fujitsu serial touchscreen"
         select SERIO
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index bef741522954..10e0be6cea43 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC)	+= atmel_tsadcc.o
 obj-$(CONFIG_TOUCHSCREEN_BITSY)         += h3600_ts_input.o
 obj-$(CONFIG_TOUCHSCREEN_CORGI)         += corgi_ts.o
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)         += gunze.o
+obj-$(CONFIG_TOUCHSCREEN_EETI)          += eeti_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ELO)           += elo.o
 obj-$(CONFIG_TOUCHSCREEN_FUJITSU)       += fujitsu_ts.o
 obj-$(CONFIG_TOUCHSCREEN_INEXIO)        += inexio.o
diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c
new file mode 100644
index 000000000000..3ab92222a525
--- /dev/null
+++ b/drivers/input/touchscreen/eeti_ts.c
@@ -0,0 +1,286 @@
+/*
+ * Touch Screen driver for EETI's I2C connected touch screen panels
+ *   Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * See EETI's software guide for the protocol specification:
+ *   http://home.eeti.com.tw/web20/eg/guide.htm
+ *
+ * Based on migor_ts.c
+ *   Copyright (c) 2008 Magnus Damm
+ *   Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>
+ *
+ * This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU  General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/timer.h>
+#include <linux/gpio.h>
+
+static int flip_x;
+module_param(flip_x, bool, 0644);
+MODULE_PARM_DESC(flip_x, "flip x coordinate");
+
+static int flip_y;
+module_param(flip_y, bool, 0644);
+MODULE_PARM_DESC(flip_y, "flip y coordinate");
+
+struct eeti_ts_priv {
+        struct i2c_client *client;
+        struct input_dev *input;
+        struct work_struct work;
+        struct mutex mutex;
+        int irq;
+};
+
+#define EETI_TS_BITDEPTH        (11)
+#define EETI_MAXVAL             ((1 << (EETI_TS_BITDEPTH + 1)) - 1)
+
+#define REPORT_BIT_PRESSED      (1 << 0)
+#define REPORT_BIT_AD0          (1 << 1)
+#define REPORT_BIT_AD1          (1 << 2)
+#define REPORT_BIT_HAS_PRESSURE (1 << 6)
+#define REPORT_RES_BITS(v)      (((v) >> 1) + EETI_TS_BITDEPTH)
+
+static void eeti_ts_read(struct work_struct *work)
+{
+        char buf[6];
+        unsigned int x, y, res, pressed, to = 100;
+        struct eeti_ts_priv *priv =
+                container_of(work, struct eeti_ts_priv, work);
+
+        mutex_lock(&priv->mutex);
+
+        while (!gpio_get_value(irq_to_gpio(priv->irq)) && --to)
+                i2c_master_recv(priv->client, buf, sizeof(buf));
+
+        if (!to) {
+                dev_err(&priv->client->dev,
+                        "unable to clear IRQ - line stuck?\n");
+                goto out;
+        }
+
+        /* drop non-report packets */
+        if (!(buf[0] & 0x80))
+                goto out;
+
+        pressed = buf[0] & REPORT_BIT_PRESSED;
+        res = REPORT_RES_BITS(buf[0] & (REPORT_BIT_AD0 | REPORT_BIT_AD1));
+        x = buf[2] | (buf[1] << 8);
+        y = buf[4] | (buf[3] << 8);
+
+        /* fix the range to 11 bits */
+        x >>= res - EETI_TS_BITDEPTH;
+        y >>= res - EETI_TS_BITDEPTH;
+
+        if (flip_x)
+                x = EETI_MAXVAL - x;
+
+        if (flip_y)
+                y = EETI_MAXVAL - y;
+
+        if (buf[0] & REPORT_BIT_HAS_PRESSURE)
+                input_report_abs(priv->input, ABS_PRESSURE, buf[5]);
+
+        input_report_abs(priv->input, ABS_X, x);
+        input_report_abs(priv->input, ABS_Y, y);
+        input_report_key(priv->input, BTN_TOUCH, !!pressed);
+        input_sync(priv->input);
+
+out:
+        mutex_unlock(&priv->mutex);
+}
+
+static irqreturn_t eeti_ts_isr(int irq, void *dev_id)
+{
+        struct eeti_ts_priv *priv = dev_id;
+
+         /* postpone I2C transactions as we are atomic */
+        schedule_work(&priv->work);
+
+        return IRQ_HANDLED;
+}
+
+static int eeti_ts_open(struct input_dev *dev)
+{
+        struct eeti_ts_priv *priv = input_get_drvdata(dev);
+
+        enable_irq(priv->irq);
+
+        /* Read the events once to arm the IRQ */
+        eeti_ts_read(&priv->work);
+
+        return 0;
+}
+
+static void eeti_ts_close(struct input_dev *dev)
+{
+        struct eeti_ts_priv *priv = input_get_drvdata(dev);
+
+        disable_irq(priv->irq);
+        cancel_work_sync(&priv->work);
+}
+
+static int __devinit eeti_ts_probe(struct i2c_client *client,
+                                   const struct i2c_device_id *idp)
+{
+        struct eeti_ts_priv *priv;
+        struct input_dev *input;
+        int err = -ENOMEM;
+
+        /* In contrast to what's described in the datasheet, there seems
+         * to be no way of probing the presence of that device using I2C
+         * commands. So we need to blindly believe it is there, and wait
+         * for interrupts to occur. */
+
+        priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+        if (!priv) {
+                dev_err(&client->dev, "failed to allocate driver data\n");
+                goto err0;
+        }
+
+        mutex_init(&priv->mutex);
+        input = input_allocate_device();
+
+        if (!input) {
+                dev_err(&client->dev, "Failed to allocate input device.\n");
+                goto err1;
+        }
+
+        input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+        input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+        input_set_abs_params(input, ABS_X, 0, EETI_MAXVAL, 0, 0);
+        input_set_abs_params(input, ABS_Y, 0, EETI_MAXVAL, 0, 0);
+        input_set_abs_params(input, ABS_PRESSURE, 0, 0xff, 0, 0);
+
+        input->name = client->name;
+        input->id.bustype = BUS_I2C;
+        input->dev.parent = &client->dev;
+        input->open = eeti_ts_open;
+        input->close = eeti_ts_close;
+
+        priv->client = client;
+        priv->input = input;
+        priv->irq = client->irq;
+
+        INIT_WORK(&priv->work, eeti_ts_read);
+        i2c_set_clientdata(client, priv);
+        input_set_drvdata(input, priv);
+
+        err = input_register_device(input);
+        if (err)
+                goto err1;
+
+        err = request_irq(priv->irq, eeti_ts_isr, IRQF_TRIGGER_FALLING,
+                          client->name, priv);
+        if (err) {
+                dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
+                goto err2;
+        }
+
+        /* Disable the irq for now. It will be enabled once the input device
+         * is opened. */
+        disable_irq(priv->irq);
+
+        device_init_wakeup(&client->dev, 0);
+        return 0;
+
+err2:
+        input_unregister_device(input);
+        input = NULL; /* so we dont try to free it below */
+err1:
+        input_free_device(input);
+        i2c_set_clientdata(client, NULL);
+        kfree(priv);
+err0:
+        return err;
+}
+
+static int __devexit eeti_ts_remove(struct i2c_client *client)
+{
+        struct eeti_ts_priv *priv = i2c_get_clientdata(client);
+
+        free_irq(priv->irq, priv);
+        input_unregister_device(priv->input);
+        i2c_set_clientdata(client, NULL);
+        kfree(priv);
+
+        return 0;
+}
+
+#ifdef CONFIG_PM
+static int eeti_ts_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+        struct eeti_ts_priv *priv = i2c_get_clientdata(client);
+
+        if (device_may_wakeup(&client->dev))
+                enable_irq_wake(priv->irq);
+
+        return 0;
+}
+
+static int eeti_ts_resume(struct i2c_client *client)
+{
+        struct eeti_ts_priv *priv = i2c_get_clientdata(client);
+
+        if (device_may_wakeup(&client->dev))
+                disable_irq_wake(priv->irq);
+
+        return 0;
+}
+#else
+#define eeti_ts_suspend NULL
+#define eeti_ts_resume NULL
+#endif
+
+static const struct i2c_device_id eeti_ts_id[] = {
+        { "eeti_ts", 0 },
+        { }
+};
+MODULE_DEVICE_TABLE(i2c, eeti_ts_id);
+
+static struct i2c_driver eeti_ts_driver = {
+        .driver = {
+                .name = "eeti_ts",
+        },
+        .probe = eeti_ts_probe,
+        .remove = __devexit_p(eeti_ts_remove),
+        .suspend = eeti_ts_suspend,
+        .resume = eeti_ts_resume,
+        .id_table = eeti_ts_id,
+};
+
+static int __init eeti_ts_init(void)
+{
+        return i2c_add_driver(&eeti_ts_driver);
+}
+
+static void __exit eeti_ts_exit(void)
+{
+        i2c_del_driver(&eeti_ts_driver);
+}
+
+MODULE_DESCRIPTION("EETI Touchscreen driver");
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_LICENSE("GPL");
+
+module_init(eeti_ts_init);
+module_exit(eeti_ts_exit);
+