[CPUFREQ] Longhaul - Workaround issues with APIC.

There is no need to worry about local APIC.
There is need to worry about I/O APIC, because I/O APIC
is replacing good old 8259. According to Nehemiah datasheet VIA is
using 3-wire bus to connect local APIC to I/O APIC.

"[...] When IA32_APIC_BASE[11] is set to 0, processor APICs based on the 3-wire APIC
 bus cannot be generally re-enabled until a system hardware reset. The 3-wire bus
 looses track of arbitration that would be necessary for complete re-enabling. Certain
 (local) APIC functionality can be enabled. [...]"

So we must set disable bit for each interrupt in I/O APIC registers.
Same situation as for PIC - we must poke registers direcly.
How to do this? I don't know. So at the moment it is better to fail.

Signed-off-by: Rafał Bilski <rafalbilski@interia.pl>
Signed-off-by: Dave Jones <davej@redhat.com>

1 files changed, 12 insertions, 0 deletions

diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c
index d735cb460612..dfd243f497b2 100644
--- a/arch/i386/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c
@@ -688,6 +688,18 @@ static int __init longhaul_init(void)
         if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6)
                 return -ENODEV;
 
+#ifdef CONFIG_SMP
+        if (num_online_cpus() > 1) {
+                return -ENODEV;
+                printk(KERN_ERR PFX "More than 1 CPU detected, longhaul disabled.\n");
+        }
+#endif
+#ifdef CONFIG_X86_IO_APIC
+        if (cpu_has_apic) {
+                printk(KERN_ERR PFX "APIC detected. Longhaul is currently broken in this configuration.\n");
+                return -ENODEV;
+        }
+#endif
         switch (c->x86_model) {
         case 6 ... 9:
                 return cpufreq_register_driver(&longhaul_driver);