sky2: Fix suspend/hibernation/shutdown regression with WOL enabled (rev. 2)

On my test box with the Asus M3A32-MVP main board there is a
regression from 2.6.26 related to suspend, hibernation and
shutdown.  Namely, if Wake-on-LAN is enabled with
'ethtool -s eth0 wol g', the box hangs solid during all of these
operations, while executing either sky2_suspend(), or
sky2_shutdown().  This patch fixes it for me.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 6 insertions, 1 deletions

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 06dfc950f33e..e24b25ca1c69 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -665,11 +665,16 @@ static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
 
         if (hw->chip_id != CHIP_ID_YUKON_EC) {
                 if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
-                        ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+                        /* select page 2 to access MAC control register */
+                        gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
 
+                        ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
                         /* enable Power Down */
                         ctrl |= PHY_M_PC_POW_D_ENA;
                         gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+                        /* set page register back to 0 */
+                        gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
                 }
 
                 /* set IEEE compatible Power Down Mode (dev. #4.99) */