Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (57 commits)
  [MTD] [NAND] subpage read feature as a way to increase performance. 
  CPUFREQ: S3C24XX NAND driver frequency scaling support.
  [MTD][NAND] au1550nd: remove unused variable
  [MTD] jedec_probe: Fix SST 16-bit chip detection
  [MTD][MTDPART] Fix a division by zero bug
  [MTD][MTDPART] Cleanup and document the erase region handling
  [MTD][MTDPART] Handle most checkpatch findings
  [MTD][MTDPART] Seperate main loop from per-partition code in add_mtd_partition
  [MTD] physmap: resume already suspended chips on failure to suspend
  [MTD] physmap: Fix suspend/resume/shutdown bugs.
  [MTD] [NOR] Fix -ETIMEO errors in CFI driver
  [MTD] [NAND] fsl_elbc_nand: fix section mismatch with CONFIG_MTD_OF_PARTS=y
  [JFFS2] Use .unlocked_ioctl
  [MTD] Fix const assignment in the MTD command line partitioning driver
  [MTD] [NOR] gen_probe: No debug message when debugging is disabled
  [MTD] [NAND] remove __PPC__ hardcoded address from DiskOnChip drivers
  [MTD] [MAPS] Remove the bast-flash driver.
  [MTD] [NAND] fsl_elbc_nand: ecclayout cleanups
  [MTD] [NAND] fsl_elbc_nand: implement support for flash-based BBT
  [MTD] [NAND] fsl_elbc_nand: fix OOB workability for large page NAND chips
  ...

175 files changed, 1521 insertions, 1125 deletions

diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 747b9dedab88..dc8b40783d94 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -377,7 +377,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE       AT91_CHIPSELECT_3
 
@@ -395,7 +395,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91cap9_nand_device = {
-        .name           = "at91_nand",
+        .name           = "atmel_nand",
         .id             = -1,
         .dev            = {
                                 .platform_data  = &nand_data,
@@ -404,7 +404,7 @@ static struct platform_device at91cap9_nand_device = {
         .num_resources  = ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
         unsigned long csa, mode;
 
@@ -445,7 +445,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
         platform_device_register(&at91cap9_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index de19bee83f75..8ced9bc82099 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -369,7 +369,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE       AT91_CHIPSELECT_3
 
@@ -382,7 +382,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91rm9200_nand_device = {
-        .name           = "at91_nand",
+        .name           = "atmel_nand",
         .id             = -1,
         .dev            = {
                                 .platform_data  = &nand_data,
@@ -391,7 +391,7 @@ static struct platform_device at91rm9200_nand_device = {
         .num_resources  = ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
         unsigned int csa;
 
@@ -429,7 +429,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
         platform_device_register(&at91rm9200_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 86cba4ac29b1..cae5f52f1278 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -284,7 +284,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE       AT91_CHIPSELECT_3
 
@@ -302,7 +302,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91sam9260_nand_device = {
-        .name           = "at91_nand",
+        .name           = "atmel_nand",
         .id             = -1,
         .dev            = {
                                 .platform_data  = &nand_data,
@@ -311,7 +311,7 @@ static struct platform_device at91sam9260_nand_device = {
         .num_resources  = ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
         unsigned long csa, mode;
 
@@ -373,7 +373,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
         platform_device_register(&at91sam9260_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index ec1891375dfb..483d436af22d 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -199,7 +199,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE       AT91_CHIPSELECT_3
 
@@ -211,8 +211,8 @@ static struct resource nand_resources[] = {
         }
 };
 
-static struct platform_device at91_nand_device = {
-        .name           = "at91_nand",
+static struct platform_device atmel_nand_device = {
+        .name           = "atmel_nand",
         .id             = -1,
         .dev            = {
                                 .platform_data  = &nand_data,
@@ -221,7 +221,7 @@ static struct platform_device at91_nand_device = {
         .num_resources  = ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
         unsigned long csa, mode;
 
@@ -262,11 +262,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
         at91_set_A_periph(AT91_PIN_PC1, 0);             /* NANDWE */
 
         nand_data = *data;
-        platform_device_register(&at91_nand_device);
+        platform_device_register(&atmel_nand_device);
 }
 
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 8a81f76f0200..9762b15f658a 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -353,7 +353,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE       AT91_CHIPSELECT_3
 
@@ -371,7 +371,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91sam9263_nand_device = {
-        .name           = "at91_nand",
+        .name           = "atmel_nand",
         .id             = -1,
         .dev            = {
                                 .platform_data  = &nand_data,
@@ -380,7 +380,7 @@ static struct platform_device at91sam9263_nand_device = {
         .num_resources  = ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
         unsigned long csa, mode;
 
@@ -421,7 +421,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
         platform_device_register(&at91sam9263_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index ae28101e7542..5f3094870cad 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -195,7 +195,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE       AT91_CHIPSELECT_3
 
@@ -212,8 +212,8 @@ static struct resource nand_resources[] = {
         }
 };
 
-static struct platform_device at91_nand_device = {
-        .name           = "at91_nand",
+static struct platform_device atmel_nand_device = {
+        .name           = "atmel_nand",
         .id             = -1,
         .dev            = {
                                 .platform_data  = &nand_data,
@@ -222,7 +222,7 @@ static struct platform_device at91_nand_device = {
         .num_resources  = ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
         unsigned long csa;
 
@@ -259,11 +259,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
         at91_set_A_periph(AT91_PIN_PB5, 0);             /* NANDWE */
 
         nand_data = *data;
-        platform_device_register(&at91_nand_device);
+        platform_device_register(&atmel_nand_device);
 }
 
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index b22a1a004055..af2c33aff1a8 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -142,7 +142,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return cam60_nand_partition;
 }
 
-static struct at91_nand_data __initdata cam60_nand_data = {
+static struct atmel_nand_data __initdata cam60_nand_data = {
         .ale            = 21,
         .cle            = 22,
         // .det_pin     = ... not there
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 8a2a958639db..a1c41d7c0be9 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -181,7 +181,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return cap9adk_nand_partitions;
 }
 
-static struct at91_nand_data __initdata cap9adk_nand_data = {
+static struct atmel_nand_data __initdata cap9adk_nand_data = {
         .ale            = 21,
         .cle            = 22,
 //      .det_pin        = ... not connected
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index dab958d25926..02a70b2f355b 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -147,7 +147,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return dk_nand_partition;
 }
 
-static struct at91_nand_data __initdata dk_nand_data = {
+static struct atmel_nand_data __initdata dk_nand_data = {
         .ale            = 22,
         .cle            = 21,
         .det_pin        = AT91_PIN_PB1,
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index cb065febd95e..082ed59365a4 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -105,7 +105,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return kb9202_nand_partition;
 }
 
-static struct at91_nand_data __initdata kb9202_nand_data = {
+static struct atmel_nand_data __initdata kb9202_nand_data = {
         .ale            = 22,
         .cle            = 21,
         // .det_pin     = ... not there
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 8f76af5e219a..57a6221943ed 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -141,7 +141,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
 //      .det_pin        = ... not connected
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 4d1d9c777084..6a680795c3c8 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -178,7 +178,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
 //      .det_pin        = ... not connected
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 08382c0df221..43dfbd0d543a 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -183,7 +183,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 22,
         .cle            = 21,
 //      .det_pin        = ... not connected
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index b4cd5d0ed597..6605a0980117 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -187,7 +187,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
 //      .det_pin        = ... not connected
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index b6a70fc735c3..66e77bb2e079 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -96,7 +96,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
 //      .det_pin        = ... not connected
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 7079050ab88d..bbbfd06f5e0c 100755
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -180,7 +180,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return yl9200_nand_partition;
 }
 
-static struct at91_nand_data __initdata yl9200_nand_data = {
+static struct atmel_nand_data __initdata yl9200_nand_data = {
         .ale            = 6,
         .cle            = 7,
         // .det_pin     = ... not connected
diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
index af90b00100fd..8dc48214f0b7 100644
--- a/arch/avr32/boards/atstk1000/Kconfig
+++ b/arch/avr32/boards/atstk1000/Kconfig
@@ -18,6 +18,10 @@ config BOARD_ATSTK1004
         bool "ATSTK1004"
         select CPU_AT32AP7002
 
+config BOARD_ATSTK1006
+        bool "ATSTK1006"
+        select CPU_AT32AP7000
+
 endchoice
 
 
diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile
index beead86462e8..edecee03742d 100644
--- a/arch/avr32/boards/atstk1000/Makefile
+++ b/arch/avr32/boards/atstk1000/Makefile
@@ -2,3 +2,4 @@ obj-y				+= setup.o flash.o
 obj-$(CONFIG_BOARD_ATSTK1002)   += atstk1002.o
 obj-$(CONFIG_BOARD_ATSTK1003)   += atstk1003.o
 obj-$(CONFIG_BOARD_ATSTK1004)   += atstk1004.o
+obj-$(CONFIG_BOARD_ATSTK1006)   += atstk1002.o
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index e11659b732fa..14dc5a143695 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -1,7 +1,7 @@
 /*
- * ATSTK1002 daughterboard-specific init code
+ * ATSTK1002/ATSTK1006 daughterboard-specific init code
  *
- * Copyright (C) 2005-2006 Atmel Corporation
+ * Copyright (C) 2005-2007 Atmel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -35,6 +35,74 @@ unsigned long at32_board_osc_rates[3] = {
         [2] = 12000000, /* 12 MHz on osc1 */
 };
 
+/*
+ * The ATSTK1006 daughterboard is very similar to the ATSTK1002. Both
+ * have the AT32AP7000 chip on board; the difference is that the
+ * STK1006 has 128 MB SDRAM (the STK1002 uses the 8 MB SDRAM chip on
+ * the STK1000 motherboard) and 256 MB NAND flash (the STK1002 has
+ * none.)
+ *
+ * The RAM difference is handled by the boot loader, so the only
+ * difference we end up handling here is the NAND flash.
+ */
+#ifdef CONFIG_BOARD_ATSTK1006
+#include <linux/mtd/partitions.h>
+#include <asm/arch/smc.h>
+
+static struct smc_timing nand_timing __initdata = {
+        .ncs_read_setup         = 0,
+        .nrd_setup              = 10,
+        .ncs_write_setup        = 0,
+        .nwe_setup              = 10,
+
+        .ncs_read_pulse         = 30,
+        .nrd_pulse              = 15,
+        .ncs_write_pulse        = 30,
+        .nwe_pulse              = 15,
+
+        .read_cycle             = 30,
+        .write_cycle            = 30,
+
+        .ncs_read_recover       = 0,
+        .nrd_recover            = 15,
+        .ncs_write_recover      = 0,
+        /* WE# high -> RE# low min 60 ns */
+        .nwe_recover            = 50,
+};
+
+static struct smc_config nand_config __initdata = {
+        .bus_width              = 1,
+        .nrd_controlled         = 1,
+        .nwe_controlled         = 1,
+        .nwait_mode             = 0,
+        .byte_write             = 0,
+        .tdf_cycles             = 2,
+        .tdf_mode               = 0,
+};
+
+static struct mtd_partition nand_partitions[] = {
+        {
+                .name           = "main",
+                .offset         = 0x00000000,
+                .size           = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct mtd_partition *nand_part_info(int size, int *num_partitions)
+{
+        *num_partitions = ARRAY_SIZE(nand_partitions);
+        return nand_partitions;
+}
+
+struct atmel_nand_data atstk1006_nand_data __initdata = {
+        .cle            = 21,
+        .ale            = 22,
+        .rdy_pin        = GPIO_PIN_PB(30),
+        .enable_pin     = GPIO_PIN_PB(29),
+        .partition_info = nand_part_info,
+};
+#endif
+
 struct eth_addr {
         u8 addr[6];
 };
@@ -218,6 +286,12 @@ static int __init atstk1002_init(void)
 
         at32_add_system_devices();
 
+#ifdef CONFIG_BOARD_ATSTK1006
+        smc_set_timing(&nand_config, &nand_timing);
+        smc_set_configuration(3, &nand_config);
+        at32_add_device_nand(0, &atstk1006_nand_data);
+#endif
+
 #ifdef  CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
         at32_add_device_usart(1);
 #else
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 604f44f5dd16..351e1b42f937 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1871,6 +1871,58 @@ fail:
 #endif
 
 /* --------------------------------------------------------------------
+ * NAND Flash / SmartMedia
+ * -------------------------------------------------------------------- */
+static struct resource smc_cs3_resource[] __initdata = {
+        {
+                .start  = 0x0c000000,
+                .end    = 0x0fffffff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = 0xfff03c00,
+                .end    = 0xfff03fff,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+struct platform_device *__init
+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
+{
+        struct platform_device *pdev;
+
+        if (id != 0 || !data)
+                return NULL;
+
+        pdev = platform_device_alloc("atmel_nand", id);
+        if (!pdev)
+                goto fail;
+
+        if (platform_device_add_resources(pdev, smc_cs3_resource,
+                                ARRAY_SIZE(smc_cs3_resource)))
+                goto fail;
+
+        if (platform_device_add_data(pdev, data,
+                                sizeof(struct atmel_nand_data)))
+                goto fail;
+
+        set_ebi_sfr_bits(HMATRIX_BIT(CS3A));
+        if (data->enable_pin)
+                at32_select_gpio(data->enable_pin,
+                                AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+        if (data->rdy_pin)
+                at32_select_gpio(data->rdy_pin, 0);
+        if (data->det_pin)
+                at32_select_gpio(data->det_pin, 0);
+
+        platform_device_add(pdev);
+        return pdev;
+
+fail:
+        platform_device_put(pdev);
+        return NULL;
+}
+
+/* --------------------------------------------------------------------
  * AC97C
  * -------------------------------------------------------------------- */
 static struct resource atmel_ac97c0_resource[] __initdata = {
diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
index fa427ed42787..b2d9bc61a35c 100644
--- a/arch/avr32/mach-at32ap/hsmc.c
+++ b/arch/avr32/mach-at32ap/hsmc.c
@@ -278,4 +278,4 @@ static int __init hsmc_init(void)
 {
         return platform_driver_register(&hsmc_driver);
 }
-arch_initcall(hsmc_init);
+core_initcall(hsmc_init);
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index eed06d068fd1..14f11f8b9e5f 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -1,5 +1,3 @@
-# $Id: Kconfig,v 1.11 2005/11/07 11:14:19 gleixner Exp $
-
 menuconfig MTD
         tristate "Memory Technology Device (MTD) support"
         depends on HAS_IOMEM
diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c
index 52d51eb91c16..d072ca5be689 100644
--- a/drivers/mtd/afs.c
+++ b/drivers/mtd/afs.c
@@ -21,8 +21,6 @@
    This is access code for flashes using ARM's flash partitioning
    standards.
 
-   $Id: afs.c,v 1.15 2005/11/07 11:14:19 gleixner Exp $
-
 ======================================================================*/
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index fcd1aeccdf93..5f1b472137a0 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -4,8 +4,6 @@
  *
  * (C) 2000 Red Hat. GPL'd
  *
- * $Id: cfi_cmdset_0001.c,v 1.186 2005/11/23 22:07:52 nico Exp $
- *
  *
  * 10/10/2000   Nicolas Pitre <nico@cam.org>
  *      - completely revamped method functions so they are aware and
@@ -50,6 +48,8 @@
 #define I82802AC        0x00ac
 #define MANUFACTURER_ST         0x0020
 #define M50LPW080       0x002F
+#define M50FLW080A      0x0080
+#define M50FLW080B      0x0081
 #define AT49BV640D      0x02de
 
 static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
@@ -204,7 +204,7 @@ static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
 {
         struct map_info *map = mtd->priv;
         struct cfi_private *cfi = map->fldrv_priv;
-        struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
+        struct cfi_pri_intelext *extp = cfi->cmdset_priv;
 
         printk(KERN_WARNING "cfi_cmdset_0001: Suspend "
                             "erase on write disabled.\n");
@@ -301,6 +301,8 @@ static struct cfi_fixup jedec_fixup_table[] = {
         { MANUFACTURER_INTEL, I82802AB,   fixup_use_fwh_lock, NULL, },
         { MANUFACTURER_INTEL, I82802AC,   fixup_use_fwh_lock, NULL, },
         { MANUFACTURER_ST,    M50LPW080,  fixup_use_fwh_lock, NULL, },
+        { MANUFACTURER_ST,    M50FLW080A, fixup_use_fwh_lock, NULL, },
+        { MANUFACTURER_ST,    M50FLW080B, fixup_use_fwh_lock, NULL, },
         { 0, 0, NULL, NULL }
 };
 static struct cfi_fixup fixup_table[] = {
@@ -1147,7 +1149,7 @@ static int inval_cache_and_wait_for_operation(
         struct cfi_private *cfi = map->fldrv_priv;
         map_word status, status_OK = CMD(0x80);
         int chip_state = chip->state;
-        unsigned int timeo, sleep_time;
+        unsigned int timeo, sleep_time, reset_timeo;
 
         spin_unlock(chip->mutex);
         if (inval_len)
@@ -1158,6 +1160,7 @@ static int inval_cache_and_wait_for_operation(
         timeo = chip_op_time * 8;
         if (!timeo)
                 timeo = 500000;
+        reset_timeo = timeo;
         sleep_time = chip_op_time / 2;
 
         for (;;) {
@@ -1199,6 +1202,12 @@ static int inval_cache_and_wait_for_operation(
                         remove_wait_queue(&chip->wq, &wait);
                         spin_lock(chip->mutex);
                 }
+                if (chip->erase_suspended || chip->write_suspended)  {
+                        /* Suspend has occured while sleep: reset timeout */
+                        timeo = reset_timeo;
+                        chip->erase_suspended = 0;
+                        chip->write_suspended = 0;
+                }
         }
 
         /* Done and happy. */
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index f7fcc6389533..a972cc6be436 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -16,9 +16,6 @@
  * Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com
  *
  * This code is GPL
- *
- * $Id: cfi_cmdset_0002.c,v 1.122 2005/11/07 11:14:22 gleixner Exp $
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c
index 1b720cc571f3..d4714dd9f7ab 100644
--- a/drivers/mtd/chips/cfi_cmdset_0020.c
+++ b/drivers/mtd/chips/cfi_cmdset_0020.c
@@ -4,8 +4,6 @@
  *
  * (C) 2000 Red Hat. GPL'd
  *
- * $Id: cfi_cmdset_0020.c,v 1.22 2005/11/07 11:14:22 gleixner Exp $
- *
  * 10/10/2000   Nicolas Pitre <nico@cam.org>
  *      - completely revamped method functions so they are aware and
  *        independent of the flash geometry (buswidth, interleave, etc.)
diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c
index a4463a91ce31..c418e92e1d92 100644
--- a/drivers/mtd/chips/cfi_probe.c
+++ b/drivers/mtd/chips/cfi_probe.c
@@ -1,7 +1,6 @@
 /*
    Common Flash Interface probe code.
    (C) 2000 Red Hat. GPL'd.
-   $Id: cfi_probe.c,v 1.86 2005/11/29 14:48:31 gleixner Exp $
 */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index 72e0022a47bf..0ee457018016 100644
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -6,9 +6,6 @@
  * Copyright (C) 2003 STMicroelectronics Limited
  *
  * This code is covered by the GPL.
- *
- * $Id: cfi_util.c,v 1.10 2005/11/07 11:14:23 gleixner Exp $
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/chipreg.c b/drivers/mtd/chips/chipreg.c
index 2174c97549f0..c85760968227 100644
--- a/drivers/mtd/chips/chipreg.c
+++ b/drivers/mtd/chips/chipreg.c
@@ -1,6 +1,4 @@
 /*
- * $Id: chipreg.c,v 1.17 2004/11/16 18:29:00 dwmw2 Exp $
- *
  * Registration for chip drivers
  *
  */
diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c
index d338b8c92780..f061885b2812 100644
--- a/drivers/mtd/chips/gen_probe.c
+++ b/drivers/mtd/chips/gen_probe.c
@@ -2,7 +2,6 @@
  * Routines common to all CFI-type probes.
  * (C) 2001-2003 Red Hat, Inc.
  * GPL'd
- * $Id: gen_probe.c,v 1.24 2005/11/07 11:14:23 gleixner Exp $
  */
 
 #include <linux/kernel.h>
@@ -71,8 +70,8 @@ static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chi
            interleave and device type, etc. */
         if (!genprobe_new_chip(map, cp, &cfi)) {
                 /* The probe didn't like it */
-                printk(KERN_DEBUG "%s: Found no %s device at location zero\n",
-                       cp->name, map->name);
+                pr_debug("%s: Found no %s device at location zero\n",
+                         cp->name, map->name);
                 return NULL;
         }
 
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index aa07575eb288..dbba5abf0db8 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -1,7 +1,6 @@
 /*
    Common Flash Interface probe code.
    (C) 2000 Red Hat. GPL'd.
-   $Id: jedec_probe.c,v 1.66 2005/11/07 11:14:23 gleixner Exp $
    See JEDEC (http://www.jedec.org/) standard JESD21C (section 3.5)
    for the standard this probe goes back to.
 
@@ -26,6 +25,7 @@
 /* Manufacturers */
 #define MANUFACTURER_AMD        0x0001
 #define MANUFACTURER_ATMEL      0x001f
+#define MANUFACTURER_EON        0x001c
 #define MANUFACTURER_FUJITSU    0x0004
 #define MANUFACTURER_HYUNDAI    0x00AD
 #define MANUFACTURER_INTEL      0x0089
@@ -37,6 +37,7 @@
 #define MANUFACTURER_ST         0x0020
 #define MANUFACTURER_TOSHIBA    0x0098
 #define MANUFACTURER_WINBOND    0x00da
+#define CONTINUATION_CODE       0x007f
 
 
 /* AMD */
@@ -58,6 +59,8 @@
 #define AM29LV040B      0x004F
 #define AM29F032B       0x0041
 #define AM29F002T       0x00B0
+#define AM29SL800DB     0x226B
+#define AM29SL800DT     0x22EA
 
 /* Atmel */
 #define AT49BV512       0x0003
@@ -67,6 +70,10 @@
 #define AT49BV32X       0x00C8
 #define AT49BV32XT      0x00C9
 
+/* Eon */
+#define EN29SL800BB     0x226B
+#define EN29SL800BT     0x22EA
+
 /* Fujitsu */
 #define MBM29F040C      0x00A4
 #define MBM29F800BA     0x2258
@@ -141,6 +148,8 @@
 #define M50FW080        0x002D
 #define M50FW016        0x002E
 #define M50LPW080       0x002F
+#define M50FLW080A      0x0080
+#define M50FLW080B      0x0081
 
 /* SST */
 #define SST29EE020      0x0010
@@ -191,6 +200,7 @@ enum uaddr {
         MTD_UADDR_0x0555_0x0AAA,
         MTD_UADDR_0x5555_0x2AAA,
         MTD_UADDR_0x0AAA_0x0555,
+        MTD_UADDR_0xAAAA_0x5555,
         MTD_UADDR_DONT_CARE,            /* Requires an arbitrary address */
         MTD_UADDR_UNNECESSARY,          /* Does not require any address */
 };
@@ -238,6 +248,11 @@ static const struct unlock_addr  unlock_addrs[] = {
                 .addr2 = 0x0555
         },
 
+        [MTD_UADDR_0xAAAA_0x5555] = {
+                .addr1 = 0xaaaa,
+                .addr2 = 0x5555
+        },
+
         [MTD_UADDR_DONT_CARE] = {
                 .addr1 = 0x0000,      /* Doesn't matter which address */
                 .addr2 = 0x0000       /* is used - must be last entry */
@@ -522,6 +537,36 @@ static const struct amd_flash_info jedec_table[] = {
                         ERASEINFO(0x04000,1),
                 }
         }, {
+                .mfr_id         = MANUFACTURER_AMD,
+                .dev_id         = AM29SL800DT,
+                .name           = "AMD AM29SL800DT",
+                .devtypes       = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
+                .uaddr          = MTD_UADDR_0x0AAA_0x0555,
+                .dev_size       = SIZE_1MiB,
+                .cmd_set        = P_ID_AMD_STD,
+                .nr_regions     = 4,
+                .regions        = {
+                        ERASEINFO(0x10000,15),
+                        ERASEINFO(0x08000,1),
+                        ERASEINFO(0x02000,2),
+                        ERASEINFO(0x04000,1),
+                }
+        }, {
+                .mfr_id         = MANUFACTURER_AMD,
+                .dev_id         = AM29SL800DB,
+                .name           = "AMD AM29SL800DB",
+                .devtypes       = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
+                .uaddr          = MTD_UADDR_0x0AAA_0x0555,
+                .dev_size       = SIZE_1MiB,
+                .cmd_set        = P_ID_AMD_STD,
+                .nr_regions     = 4,
+                .regions        = {
+                        ERASEINFO(0x04000,1),
+                        ERASEINFO(0x02000,2),
+                        ERASEINFO(0x08000,1),
+                        ERASEINFO(0x10000,15),
+                }
+        }, {
                 .mfr_id         = MANUFACTURER_ATMEL,
                 .dev_id         = AT49BV512,
                 .name           = "Atmel AT49BV512",
@@ -599,6 +644,36 @@ static const struct amd_flash_info jedec_table[] = {
                         ERASEINFO(0x02000,8)
                 }
         }, {
+                .mfr_id         = MANUFACTURER_EON,
+                .dev_id         = EN29SL800BT,
+                .name           = "Eon EN29SL800BT",
+                .devtypes       = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
+                .uaddr          = MTD_UADDR_0x0AAA_0x0555,
+                .dev_size       = SIZE_1MiB,
+                .cmd_set        = P_ID_AMD_STD,
+                .nr_regions     = 4,
+                .regions        = {
+                        ERASEINFO(0x10000,15),
+                        ERASEINFO(0x08000,1),
+                        ERASEINFO(0x02000,2),
+                        ERASEINFO(0x04000,1),
+                }
+        }, {
+                .mfr_id         = MANUFACTURER_EON,
+                .dev_id         = EN29SL800BB,
+                .name           = "Eon EN29SL800BB",
+                .devtypes       = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
+                .uaddr          = MTD_UADDR_0x0AAA_0x0555,
+                .dev_size       = SIZE_1MiB,
+                .cmd_set        = P_ID_AMD_STD,
+                .nr_regions     = 4,
+                .regions        = {
+                        ERASEINFO(0x04000,1),
+                        ERASEINFO(0x02000,2),
+                        ERASEINFO(0x08000,1),
+                        ERASEINFO(0x10000,15),
+                }
+        }, {
                 .mfr_id         = MANUFACTURER_FUJITSU,
                 .dev_id         = MBM29F040C,
                 .name           = "Fujitsu MBM29F040C",
@@ -1392,8 +1467,8 @@ static const struct amd_flash_info jedec_table[] = {
                 .mfr_id         = MANUFACTURER_SST,     /* should be CFI */
                 .dev_id         = SST39LF160,
                 .name           = "SST 39LF160",
-                .devtypes       = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
-                .uaddr          = MTD_UADDR_0x5555_0x2AAA,      /* ???? */
+                .devtypes       = CFI_DEVICETYPE_X16,
+                .uaddr          = MTD_UADDR_0xAAAA_0x5555,
                 .dev_size       = SIZE_2MiB,
                 .cmd_set        = P_ID_AMD_STD,
                 .nr_regions     = 2,
@@ -1405,8 +1480,8 @@ static const struct amd_flash_info jedec_table[] = {
                 .mfr_id         = MANUFACTURER_SST,     /* should be CFI */
                 .dev_id         = SST39VF1601,
                 .name           = "SST 39VF1601",
-                .devtypes       = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
-                .uaddr          = MTD_UADDR_0x5555_0x2AAA,      /* ???? */
+                .devtypes       = CFI_DEVICETYPE_X16,
+                .uaddr          = MTD_UADDR_0xAAAA_0x5555,
                 .dev_size       = SIZE_2MiB,
                 .cmd_set        = P_ID_AMD_STD,
                 .nr_regions     = 2,
@@ -1590,6 +1665,36 @@ static const struct amd_flash_info jedec_table[] = {
                 .nr_regions     = 1,
                 .regions        = {
                         ERASEINFO(0x10000,16),
+                },
+        }, {
+                .mfr_id         = MANUFACTURER_ST,
+                .dev_id         = M50FLW080A,
+                .name           = "ST M50FLW080A",
+                .devtypes       = CFI_DEVICETYPE_X8,
+                .uaddr          = MTD_UADDR_UNNECESSARY,
+                .dev_size       = SIZE_1MiB,
+                .cmd_set        = P_ID_INTEL_EXT,
+                .nr_regions     = 4,
+                .regions        = {
+                        ERASEINFO(0x1000,16),
+                        ERASEINFO(0x10000,13),
+                        ERASEINFO(0x1000,16),
+                        ERASEINFO(0x1000,16),
+                }
+        }, {
+                .mfr_id         = MANUFACTURER_ST,
+                .dev_id         = M50FLW080B,
+                .name           = "ST M50FLW080B",
+                .devtypes       = CFI_DEVICETYPE_X8,
+                .uaddr          = MTD_UADDR_UNNECESSARY,
+                .dev_size       = SIZE_1MiB,
+                .cmd_set        = P_ID_INTEL_EXT,
+                .nr_regions     = 4,
+                .regions        = {
+                        ERASEINFO(0x1000,16),
+                        ERASEINFO(0x1000,16),
+                        ERASEINFO(0x10000,13),
+                        ERASEINFO(0x1000,16),
                 }
         }, {
                 .mfr_id         = MANUFACTURER_TOSHIBA,
@@ -1696,9 +1801,21 @@ static inline u32 jedec_read_mfr(struct map_info *map, uint32_t base,
 {
         map_word result;
         unsigned long mask;
-        u32 ofs = cfi_build_cmd_addr(0, cfi_interleave(cfi), cfi->device_type);
-        mask = (1 << (cfi->device_type * 8)) -1;
-        result = map_read(map, base + ofs);
+        int bank = 0;
+
+        /* According to JEDEC "Standard Manufacturer's Identification Code"
+         * (http://www.jedec.org/download/search/jep106W.pdf)
+         * several first banks can contain 0x7f instead of actual ID
+         */
+        do {
+                uint32_t ofs = cfi_build_cmd_addr(0 + (bank << 8),
+                                                  cfi_interleave(cfi),
+                                                  cfi->device_type);
+                mask = (1 << (cfi->device_type * 8)) - 1;
+                result = map_read(map, base + ofs);
+                bank++;
+        } while ((result.x[0] & mask) == CONTINUATION_CODE);
+
         return result.x[0] & mask;
 }
 
diff --git a/drivers/mtd/chips/map_absent.c b/drivers/mtd/chips/map_absent.c
index fc478c0f93f5..494d30d0631a 100644
--- a/drivers/mtd/chips/map_absent.c
+++ b/drivers/mtd/chips/map_absent.c
@@ -1,7 +1,6 @@
 /*
  * Common code to handle absent "placeholder" devices
  * Copyright 2001 Resilience Corporation <ebrower@resilience.com>
- * $Id: map_absent.c,v 1.6 2005/11/07 11:14:23 gleixner Exp $
  *
  * This map driver is used to allocate "placeholder" MTD
  * devices on systems that have socketed/removable media.
diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c
index 5cb6d5263661..072dd8abf33a 100644
--- a/drivers/mtd/chips/map_ram.c
+++ b/drivers/mtd/chips/map_ram.c
@@ -1,7 +1,6 @@
 /*
  * Common code to handle map devices which are simple RAM
  * (C) 2000 Red Hat. GPL'd.
- * $Id: map_ram.c,v 1.22 2005/01/05 18:05:12 dwmw2 Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c
index cb27f855074c..821d0ed6bae3 100644
--- a/drivers/mtd/chips/map_rom.c
+++ b/drivers/mtd/chips/map_rom.c
@@ -1,7 +1,6 @@
 /*
  * Common code to handle map devices which are simple ROM
  * (C) 2000 Red Hat. GPL'd.
- * $Id: map_rom.c,v 1.23 2005/01/05 18:05:12 dwmw2 Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index e472a0e9de9d..71bc07f149b7 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -1,6 +1,4 @@
 /*
- * $Id: cmdlinepart.c,v 1.19 2005/11/07 11:14:19 gleixner Exp $
- *
  * Read flash partition table from command line
  *
  * Copyright 2002 SYSGO Real-Time Solutions GmbH
@@ -308,7 +306,7 @@ static int parse_cmdline_partitions(struct mtd_info *master,
         unsigned long offset;
         int i;
         struct cmdline_mtd_partition *part;
-        char *mtd_id = master->name;
+        const char *mtd_id = master->name;
 
         /* parse command line */
         if (!cmdline_parsed)
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 35ed1103dbb2..9c613f06623c 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -1,5 +1,4 @@
 # drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.18 2005/11/07 11:14:24 gleixner Exp $
 
 menu "Self-contained MTD device drivers"
         depends on MTD!=n
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index 0f788d5c4bf8..0993d5cf3923 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -1,7 +1,6 @@
 #
 # linux/drivers/devices/Makefile
 #
-# $Id: Makefile.common,v 1.7 2004/12/22 17:51:15 joern Exp $
 
 obj-$(CONFIG_MTD_DOC2000)       += doc2000.o
 obj-$(CONFIG_MTD_DOC2001)       += doc2001.o
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index 7b72a1b36115..91fbba767635 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -1,6 +1,4 @@
 /*
- * $Id: block2mtd.c,v 1.30 2005/11/29 14:48:32 gleixner Exp $
- *
  * block2mtd.c - create an mtd from a block device
  *
  * Copyright (C) 2001,2002      Simon Evans <spse@secret.org.uk>
@@ -20,9 +18,6 @@
 #include <linux/mutex.h>
 #include <linux/mount.h>
 
-#define VERSION "$Revision: 1.30 $"
-
-
 #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args)
 #define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args)
 
@@ -453,7 +448,6 @@ MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
 static int __init block2mtd_init(void)
 {
         int ret = 0;
-        INFO("version " VERSION);
 
 #ifndef MODULE
         if (strlen(block2mtd_paramline))
diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c
index 846989f292e3..50de839c77a9 100644
--- a/drivers/mtd/devices/doc2000.c
+++ b/drivers/mtd/devices/doc2000.c
@@ -3,8 +3,6 @@
  * Linux driver for Disk-On-Chip 2000 and Millennium
  * (c) 1999 Machine Vision Holdings, Inc.
  * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
- *
- * $Id: doc2000.c,v 1.67 2005/11/07 11:14:24 gleixner Exp $
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c
index 6413efc045e0..e32c568c1145 100644
--- a/drivers/mtd/devices/doc2001.c
+++ b/drivers/mtd/devices/doc2001.c
@@ -3,8 +3,6 @@
  * Linux driver for Disk-On-Chip Millennium
  * (c) 1999 Machine Vision Holdings, Inc.
  * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
- *
- * $Id: doc2001.c,v 1.49 2005/11/07 11:14:24 gleixner Exp $
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c
index 83be3461658f..d853f891b586 100644
--- a/drivers/mtd/devices/doc2001plus.c
+++ b/drivers/mtd/devices/doc2001plus.c
@@ -6,8 +6,6 @@
  * (c) 1999 Machine Vision Holdings, Inc.
  * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
  *
- * $Id: doc2001plus.c,v 1.14 2005/11/07 11:14:24 gleixner Exp $
- *
  * Released under GPL
  */
 
diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c
index fd8a8daba3a8..874e51b110a2 100644
--- a/drivers/mtd/devices/docecc.c
+++ b/drivers/mtd/devices/docecc.c
@@ -7,8 +7,6 @@
  * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
  * Copyright (C) 2000 Netgem S.A.
  *
- * $Id: docecc.c,v 1.7 2005/11/07 11:14:25 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c
index d8cc94ec4e50..6e62922942b1 100644
--- a/drivers/mtd/devices/docprobe.c
+++ b/drivers/mtd/devices/docprobe.c
@@ -4,9 +4,6 @@
 /* (C) 1999 Machine Vision Holdings, Inc.                       */
 /* (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>          */
 
-/* $Id: docprobe.c,v 1.46 2005/11/07 11:14:25 gleixner Exp $    */
-
-
 
 /* DOC_PASSIVE_PROBE:
    In order to ensure that the BIOS checksum is correct at boot time, and
@@ -79,8 +76,6 @@ static unsigned long __initdata doc_locations[] = {
         0xe0000, 0xe2000, 0xe4000, 0xe6000,
         0xe8000, 0xea000, 0xec000, 0xee000,
 #endif /*  CONFIG_MTD_DOCPROBE_HIGH */
-#elif defined(__PPC__)
-        0xe4000000,
 #else
 #warning Unknown architecture for DiskOnChip. No default probe locations defined
 #endif
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index 1d324e5c412d..f4bda4cee495 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -2,8 +2,6 @@
 /*
  * MTD driver for the 28F160F3 Flash Memory (non-CFI) on LART.
  *
- * $Id: lart.c,v 1.9 2005/11/07 11:14:25 gleixner Exp $
- *
  * Author: Abraham vd Merwe <abraham@2d3d.co.za>
  *
  * Copyright (c) 2001, 2d3D, Inc.
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index b402269301f6..b35c3333e210 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -33,6 +33,7 @@
 /* Flash opcodes. */
 #define OPCODE_WREN             0x06    /* Write enable */
 #define OPCODE_RDSR             0x05    /* Read status register */
+#define OPCODE_WRSR             0x01    /* Write status register 1 byte */
 #define OPCODE_NORM_READ        0x03    /* Read data bytes (low frequency) */
 #define OPCODE_FAST_READ        0x0b    /* Read data bytes (high frequency) */
 #define OPCODE_PP               0x02    /* Page program (up to 256 bytes) */
@@ -112,6 +113,17 @@ static int read_sr(struct m25p *flash)
         return val;
 }
 
+/*
+ * Write status register 1 byte
+ * Returns negative if error occurred.
+ */
+static int write_sr(struct m25p *flash, u8 val)
+{
+        flash->command[0] = OPCODE_WRSR;
+        flash->command[1] = val;
+
+        return spi_write(flash->spi, flash->command, 2);
+}
 
 /*
  * Set write enable latch with Write Enable command.
@@ -589,6 +601,16 @@ static int __devinit m25p_probe(struct spi_device *spi)
         mutex_init(&flash->lock);
         dev_set_drvdata(&spi->dev, flash);
 
+        /*
+         * Atmel serial flash tend to power up
+         * with the software protection bits set
+         */
+
+        if (info->jedec_id >> 16 == 0x1f) {
+                write_enable(flash);
+                write_sr(flash, 0);
+        }
+
         if (data && data->name)
                 flash->mtd.name = data->name;
         else
diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c
index 9cff119a2024..6a9a24a80a6d 100644
--- a/drivers/mtd/devices/ms02-nv.c
+++ b/drivers/mtd/devices/ms02-nv.c
@@ -5,8 +5,6 @@
  *      modify it under the terms of the GNU General Public License
  *      as published by the Free Software Foundation; either version
  *      2 of the License, or (at your option) any later version.
- *
- *      $Id: ms02-nv.c,v 1.11 2005/11/14 13:41:47 macro Exp $
  */
 
 #include <linux/init.h>
diff --git a/drivers/mtd/devices/ms02-nv.h b/drivers/mtd/devices/ms02-nv.h
index 8a6eef7cfee3..04deafd3a771 100644
--- a/drivers/mtd/devices/ms02-nv.h
+++ b/drivers/mtd/devices/ms02-nv.h
@@ -9,8 +9,6 @@
  *      modify it under the terms of the GNU General Public License
  *      as published by the Free Software Foundation; either version
  *      2 of the License, or (at your option) any later version.
- *
- *      $Id: ms02-nv.h,v 1.3 2003/08/19 09:25:36 dwmw2 Exp $
  */
 
 #include <linux/ioport.h>
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index b35e4813a3a5..54e36bfc2c3b 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -82,7 +82,7 @@
 
 
 struct dataflash {
-        u8                      command[4];
+        uint8_t                 command[4];
         char                    name[24];
 
         unsigned                partitioned:1;
@@ -150,7 +150,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
         struct spi_transfer     x = { .tx_dma = 0, };
         struct spi_message      msg;
         unsigned                blocksize = priv->page_size << 3;
-        u8                      *command;
+        uint8_t                 *command;
 
         DEBUG(MTD_DEBUG_LEVEL2, "%s: erase addr=0x%x len 0x%x\n",
                         spi->dev.bus_id,
@@ -182,8 +182,8 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
                 pageaddr = pageaddr << priv->page_offset;
 
                 command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE;
-                command[1] = (u8)(pageaddr >> 16);
-                command[2] = (u8)(pageaddr >> 8);
+                command[1] = (uint8_t)(pageaddr >> 16);
+                command[2] = (uint8_t)(pageaddr >> 8);
                 command[3] = 0;
 
                 DEBUG(MTD_DEBUG_LEVEL3, "ERASE %s: (%x) %x %x %x [%i]\n",
@@ -234,7 +234,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
         struct spi_transfer     x[2] = { { .tx_dma = 0, }, };
         struct spi_message      msg;
         unsigned int            addr;
-        u8                      *command;
+        uint8_t                 *command;
         int                     status;
 
         DEBUG(MTD_DEBUG_LEVEL2, "%s: read 0x%x..0x%x\n",
@@ -274,9 +274,9 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
          * fewer "don't care" bytes.  Both buffers stay unchanged.
          */
         command[0] = OP_READ_CONTINUOUS;
-        command[1] = (u8)(addr >> 16);
-        command[2] = (u8)(addr >> 8);
-        command[3] = (u8)(addr >> 0);
+        command[1] = (uint8_t)(addr >> 16);
+        command[2] = (uint8_t)(addr >> 8);
+        command[3] = (uint8_t)(addr >> 0);
         /* plus 4 "don't care" bytes */
 
         status = spi_sync(priv->spi, &msg);
@@ -311,7 +311,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
         size_t                  remaining = len;
         u_char                  *writebuf = (u_char *) buf;
         int                     status = -EINVAL;
-        u8                      *command;
+        uint8_t                 *command;
 
         DEBUG(MTD_DEBUG_LEVEL2, "%s: write 0x%x..0x%x\n",
                 spi->dev.bus_id, (unsigned)to, (unsigned)(to + len));
@@ -487,7 +487,9 @@ add_dataflash(struct spi_device *spi, char *name,
         device->write = dataflash_write;
         device->priv = priv;
 
-        dev_info(&spi->dev, "%s (%d KBytes)\n", name, device->size/1024);
+        dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes, "
+                "erasesize %d bytes\n", name, device->size/1024,
+                 pagesize, pagesize * 8);       /* 8 pages = 1 block */
         dev_set_drvdata(&spi->dev, priv);
 
         if (mtd_has_partitions()) {
@@ -521,7 +523,7 @@ add_dataflash(struct spi_device *spi, char *name,
  *
  *   Device      Density         ID code          #Pages PageSize  Offset
  *   AT45DB011B  1Mbit   (128K)  xx0011xx (0x0c)    512    264      9
- *   AT45DB021B  2Mbit   (256K)  xx0101xx (0x14)   1025    264      9
+ *   AT45DB021B  2Mbit   (256K)  xx0101xx (0x14)   1024    264      9
  *   AT45DB041B  4Mbit   (512K)  xx0111xx (0x1c)   2048    264      9
  *   AT45DB081B  8Mbit   (1M)    xx1001xx (0x24)   4096    264      9
  *   AT45DB0161B 16Mbit  (2M)    xx1011xx (0x2c)   4096    528     10
@@ -529,9 +531,114 @@ add_dataflash(struct spi_device *spi, char *name,
  *   AT45DB0642  64Mbit  (8M)    xx111xxx (0x3c)   8192   1056     11
  *   AT45DB1282  128Mbit (16M)   xx0100xx (0x10)  16384   1056     11
  */
+
+struct flash_info {
+        char            *name;
+
+        /* JEDEC id zero means "no ID" (most older chips); otherwise it has
+         * a high byte of zero plus three data bytes: the manufacturer id,
+         * then a two byte device id.
+         */
+        uint32_t        jedec_id;
+
+        /* The size listed here is what works with OPCODE_SE, which isn't
+         * necessarily called a "sector" by the vendor.
+         */
+        unsigned        nr_pages;
+        uint16_t        pagesize;
+        uint16_t        pageoffset;
+
+        uint16_t        flags;
+#define SUP_POW2PS      0x02
+#define IS_POW2PS       0x01
+};
+
+static struct flash_info __devinitdata dataflash_data [] = {
+
+        { "at45db011d",  0x1f2200, 512, 264, 9, SUP_POW2PS},
+        { "at45db011d",  0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+        { "at45db021d",  0x1f2300, 1024, 264, 9, SUP_POW2PS},
+        { "at45db021d",  0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+        { "at45db041d",  0x1f2400, 2048, 264, 9, SUP_POW2PS},
+        { "at45db041d",  0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+        { "at45db081d",  0x1f2500, 4096, 264, 9, SUP_POW2PS},
+        { "at45db081d",  0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+        { "at45db161d",  0x1f2600, 4096, 528, 10, SUP_POW2PS},
+        { "at45db161d",  0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS},
+
+        { "at45db321c",  0x1f2700, 8192, 528, 10, },
+
+        { "at45db321d",  0x1f2701, 8192, 528, 10, SUP_POW2PS},
+        { "at45db321d",  0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS},
+
+        { "at45db641d",  0x1f2800, 8192, 1056, 11, SUP_POW2PS},
+        { "at45db641d",  0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
+};
+
+static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
+{
+        int                     tmp;
+        uint8_t                 code = OP_READ_ID;
+        uint8_t                 id[3];
+        uint32_t                jedec;
+        struct flash_info       *info;
+        int status;
+
+
+        /* JEDEC also defines an optional "extended device information"
+         * string for after vendor-specific data, after the three bytes
+         * we use here.  Supporting some chips might require using it.
+         */
+        tmp = spi_write_then_read(spi, &code, 1, id, 3);
+        if (tmp < 0) {
+                DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
+                        spi->dev.bus_id, tmp);
+                return NULL;
+        }
+        jedec = id[0];
+        jedec = jedec << 8;
+        jedec |= id[1];
+        jedec = jedec << 8;
+        jedec |= id[2];
+
+        for (tmp = 0, info = dataflash_data;
+                        tmp < ARRAY_SIZE(dataflash_data);
+                        tmp++, info++) {
+                if (info->jedec_id == jedec) {
+                        if (info->flags & SUP_POW2PS) {
+                                status = dataflash_status(spi);
+                                if (status & 0x1)
+                                        /* return power of 2 pagesize */
+                                        return ++info;
+                                else
+                                        return info;
+                        }
+                }
+        }
+        return NULL;
+}
+
 static int __devinit dataflash_probe(struct spi_device *spi)
 {
         int status;
+        struct flash_info       *info;
+
+        /*
+         * Try to detect dataflash by JEDEC ID.
+         * If it succeeds we know we have either a C or D part.
+         * D will support power of 2 pagesize option.
+         */
+
+        info = jedec_probe(spi);
+
+        if (info != NULL)
+                return add_dataflash(spi, info->name, info->nr_pages,
+                                 info->pagesize, info->pageoffset);
+
 
         status = dataflash_status(spi);
         if (status <= 0 || status == 0xff) {
@@ -551,16 +658,16 @@ static int __devinit dataflash_probe(struct spi_device *spi)
                 status = add_dataflash(spi, "AT45DB011B", 512, 264, 9);
                 break;
         case 0x14:      /* 0 1 0 1 x x */
-                status = add_dataflash(spi, "AT45DB021B", 1025, 264, 9);
+                status = add_dataflash(spi, "AT45DB021B", 1024, 264, 9);
                 break;
         case 0x1c:      /* 0 1 1 1 x x */
-                status = add_dataflash(spi, "AT45DB041x", 2048, 264, 9);
+                status = add_dataflash(spi, "AT45DB041B", 2048, 264, 9);
                 break;
         case 0x24:      /* 1 0 0 1 x x */
                 status = add_dataflash(spi, "AT45DB081B", 4096, 264, 9);
                 break;
         case 0x2c:      /* 1 0 1 1 x x */
-                status = add_dataflash(spi, "AT45DB161x", 4096, 528, 10);
+                status = add_dataflash(spi, "AT45DB161B", 4096, 528, 10);
                 break;
         case 0x34:      /* 1 1 0 1 x x */
                 status = add_dataflash(spi, "AT45DB321x", 8192, 528, 10);
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c
index 0399be178620..3aaca88847d3 100644
--- a/drivers/mtd/devices/mtdram.c
+++ b/drivers/mtd/devices/mtdram.c
@@ -1,6 +1,5 @@
 /*
  * mtdram - a test mtd device
- * $Id: mtdram.c,v 1.37 2005/04/21 03:42:11 joern Exp $
  * Author: Alexander Larsson <alex@cendio.se>
  *
  * Copyright (c) 1999 Alexander Larsson <alex@cendio.se>
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index c7987b1c5e01..088fbb7595b5 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -1,6 +1,4 @@
 /**
- * $Id: phram.c,v 1.16 2005/11/07 11:14:25 gleixner Exp $
- *
  * Copyright (c) ????           Jochen Schäuble <psionic@psionic.de>
  * Copyright (c) 2003-2004      Joern Engel <joern@wh.fh-wedel.de>
  *
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index bc9981749064..d38bca64bb15 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -1,6 +1,4 @@
 /*
- * $Id: pmc551.c,v 1.32 2005/11/07 11:14:25 gleixner Exp $
- *
  * PMC551 PCI Mezzanine Ram Device
  *
  * Author:
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index cb86db746f28..a425d09f35a0 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -1,7 +1,5 @@
 /*======================================================================
 
-  $Id: slram.c,v 1.36 2005/11/07 11:14:25 gleixner Exp $
-
   This driver provides a method to access memory not used by the kernel
   itself (i.e. if the kernel commandline mem=xxx is used). To actually
   use slram at least mtdblock or mtdchar is required (for block or
diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
index 5c29872184e6..f34f20c78911 100644
--- a/drivers/mtd/ftl.c
+++ b/drivers/mtd/ftl.c
@@ -1,5 +1,4 @@
 /* This version ported to the Linux-MTD system by dwmw2@infradead.org
- * $Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $
  *
  * Fixes: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
  * - fixes some leaks on failure in build_maps and ftl_notify_add, cleanups
@@ -1078,8 +1077,6 @@ static struct mtd_blktrans_ops ftl_tr = {
 
 static int init_ftl(void)
 {
-        DEBUG(0, "$Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $\n");
-
         return register_mtd_blktrans(&ftl_tr);
 }
 
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index b0e396504e67..c4f9d3378b24 100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -7,8 +7,6 @@
  * (c) 1999 Machine Vision Holdings, Inc.
  * Author: David Woodhouse <dwmw2@infradead.org>
  *
- * $Id: inftlcore.c,v 1.19 2005/11/07 11:14:20 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -953,9 +951,6 @@ static struct mtd_blktrans_ops inftl_tr = {
 
 static int __init init_inftl(void)
 {
-        printk(KERN_INFO "INFTL: inftlcore.c $Revision: 1.19 $, "
-                "inftlmount.c %s\n", inftlmountrev);
-
         return register_mtd_blktrans(&inftl_tr);
 }
 
diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c
index c551d2f0779c..9113628ed1ef 100644
--- a/drivers/mtd/inftlmount.c
+++ b/drivers/mtd/inftlmount.c
@@ -8,8 +8,6 @@
  * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
  * Copyright (C) 2000 Netgem S.A.
  *
- * $Id: inftlmount.c,v 1.18 2005/11/07 11:14:20 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -39,8 +37,6 @@
 #include <linux/mtd/inftl.h>
 #include <linux/mtd/compatmac.h>
 
-char inftlmountrev[]="$Revision: 1.18 $";
-
 /*
  * find_boot_record: Find the INFTL Media Header and its Spare copy which
  *      contains the various device information of the INFTL partition and
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index d2fbc2964523..df8e00bba07b 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -1,5 +1,4 @@
 # drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.61 2005/11/07 11:14:26 gleixner Exp $
 
 menu "Mapping drivers for chip access"
         depends on MTD!=n
@@ -510,6 +509,17 @@ config MTD_PCMCIA_ANONYMOUS
 
           If unsure, say N.
 
+config MTD_BFIN_ASYNC
+        tristate "Blackfin BF533-STAMP Flash Chip Support"
+        depends on BFIN533_STAMP && MTD_CFI
+        select MTD_PARTITIONS
+        default y
+        help
+          Map driver which allows for simultaneous utilization of
+          ethernet and CFI parallel flash.
+
+          If compiled as a module, it will be called bfin-async-flash.
+
 config MTD_UCLINUX
         tristate "Generic uClinux RAM/ROM filesystem support"
         depends on MTD_PARTITIONS && !MMU
@@ -539,24 +549,6 @@ config MTD_DMV182
         help
           Map driver for Dy-4 SVME/DMV-182 board.
 
-config MTD_BAST
-        tristate "Map driver for Simtec BAST (EB2410ITX) or Thorcom VR1000"
-        depends on ARCH_BAST || MACH_VR1000
-        select MTD_PARTITIONS
-        select MTD_MAP_BANK_WIDTH_16
-        select MTD_JEDECPROBE
-        help
-          Map driver for NOR flash on the Simtec BAST (EB2410ITX), or the
-          Thorcom VR1000
-
-          Note, this driver *cannot* over-ride the WP link on the
-          board, or currently detect the state of the link.
-
-config MTD_BAST_MAXSIZE
-        int "Maximum size for BAST flash area (MiB)"
-        depends on MTD_BAST
-        default "4"
-
 config MTD_SHARP_SL
         tristate "ROM mapped on Sharp SL Series"
         depends on ARCH_PXA
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index c6ce8673dab2..6cda6df973e5 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -1,7 +1,6 @@
 #
 # linux/drivers/maps/Makefile
 #
-# $Id: Makefile.common,v 1.34 2005/11/07 11:14:26 gleixner Exp $
 
 ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y)
 obj-$(CONFIG_MTD)               += map_funcs.o
@@ -10,7 +9,6 @@ endif
 # Chip mappings
 obj-$(CONFIG_MTD_CDB89712)      += cdb89712.o
 obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
-obj-$(CONFIG_MTD_BAST)          += bast-flash.o
 obj-$(CONFIG_MTD_CFI_FLAGADM)   += cfi_flagadm.o
 obj-$(CONFIG_MTD_DC21285)       += dc21285.o
 obj-$(CONFIG_MTD_DILNETPC)      += dilnetpc.o
@@ -66,3 +64,4 @@ obj-$(CONFIG_MTD_SHARP_SL)	+= sharpsl-flash.o
 obj-$(CONFIG_MTD_PLATRAM)       += plat-ram.o
 obj-$(CONFIG_MTD_OMAP_NOR)      += omap_nor.o
 obj-$(CONFIG_MTD_INTEL_VR_NOR)  += intel_vr_nor.o
+obj-$(CONFIG_MTD_BFIN_ASYNC)    += bfin-async-flash.o
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
index 728aed6ad722..948b86f35ef4 100644
--- a/drivers/mtd/maps/amd76xrom.c
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -2,7 +2,6 @@
  * amd76xrom.c
  *
  * Normal mappings of chips in physical memory
- * $Id: amd76xrom.c,v 1.21 2005/11/07 11:14:26 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/autcpu12-nvram.c b/drivers/mtd/maps/autcpu12-nvram.c
index 7ed3424dd959..cf32267263df 100644
--- a/drivers/mtd/maps/autcpu12-nvram.c
+++ b/drivers/mtd/maps/autcpu12-nvram.c
@@ -2,8 +2,6 @@
  * NV-RAM memory access on autcpu12
  * (C) 2002 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: autcpu12-nvram.c,v 1.9 2005/11/07 11:14:26 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/maps/bast-flash.c b/drivers/mtd/maps/bast-flash.c
deleted file mode 100644
index 1f492062f8ca..000000000000
--- a/drivers/mtd/maps/bast-flash.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/* linux/drivers/mtd/maps/bast-flash.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * Simtec Bast (EB2410ITX) NOR MTD Mapping driver
- *
- * Changelog:
- *      20-Sep-2004  BJD  Initial version
- *      17-Jan-2005  BJD  Add whole device if no partitions found
- *
- * $Id: bast-flash.c,v 1.5 2005/11/07 11:14:26 gleixner Exp $
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-#include <asm/mach/flash.h>
-
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-cpld.h>
-
-#ifdef CONFIG_MTD_BAST_MAXSIZE
-#define AREA_MAXSIZE (CONFIG_MTD_BAST_MAXSIZE * SZ_1M)
-#else
-#define AREA_MAXSIZE (32 * SZ_1M)
-#endif
-
-#define PFX "bast-flash: "
-
-struct bast_flash_info {
-        struct mtd_info         *mtd;
-        struct map_info          map;
-        struct mtd_partition    *partitions;
-        struct resource         *area;
-};
-
-static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-
-static void bast_flash_setrw(int to)
-{
-        unsigned int val;
-        unsigned long flags;
-
-        local_irq_save(flags);
-        val = __raw_readb(BAST_VA_CTRL3);
-
-        if (to)
-                val |= BAST_CPLD_CTRL3_ROMWEN;
-        else
-                val &= ~BAST_CPLD_CTRL3_ROMWEN;
-
-        pr_debug("new cpld ctrl3=%02x\n", val);
-
-        __raw_writeb(val, BAST_VA_CTRL3);
-        local_irq_restore(flags);
-}
-
-static int bast_flash_remove(struct platform_device *pdev)
-{
-        struct bast_flash_info *info = platform_get_drvdata(pdev);
-
-        platform_set_drvdata(pdev, NULL);
-
-        if (info == NULL)
-                return 0;
-
-        if (info->map.virt != NULL)
-                iounmap(info->map.virt);
-
-        if (info->mtd) {
-                del_mtd_partitions(info->mtd);
-                map_destroy(info->mtd);
-        }
-
-        kfree(info->partitions);
-
-        if (info->area) {
-                release_resource(info->area);
-                kfree(info->area);
-        }
-
-        kfree(info);
-
-        return 0;
-}
-
-static int bast_flash_probe(struct platform_device *pdev)
-{
-        struct bast_flash_info *info;
-        struct resource *res;
-        int err = 0;
-
-        info = kmalloc(sizeof(*info), GFP_KERNEL);
-        if (info == NULL) {
-                printk(KERN_ERR PFX "no memory for flash info\n");
-                err = -ENOMEM;
-                goto exit_error;
-        }
-
-        memzero(info, sizeof(*info));
-        platform_set_drvdata(pdev, info);
-
-        res = pdev->resource;  /* assume that the flash has one resource */
-
-        info->map.phys = res->start;
-        info->map.size = res->end - res->start + 1;
-        info->map.name = pdev->dev.bus_id;
-        info->map.bankwidth = 2;
-
-        if (info->map.size > AREA_MAXSIZE)
-                info->map.size = AREA_MAXSIZE;
-
-        pr_debug("%s: area %08lx, size %ld\n", __func__,
-                 info->map.phys, info->map.size);
-
-        info->area = request_mem_region(res->start, info->map.size,
-                                        pdev->name);
-        if (info->area == NULL) {
-                printk(KERN_ERR PFX "cannot reserve flash memory region\n");
-                err = -ENOENT;
-                goto exit_error;
-        }
-
-        info->map.virt = ioremap(res->start, info->map.size);
-        pr_debug("%s: virt at %08x\n", __func__, (int)info->map.virt);
-
-        if (info->map.virt == 0) {
-                printk(KERN_ERR PFX "failed to ioremap() region\n");
-                err = -EIO;
-                goto exit_error;
-        }
-
-        simple_map_init(&info->map);
-
-        /* enable the write to the flash area */
-
-        bast_flash_setrw(1);
-
-        /* probe for the device(s) */
-
-        info->mtd = do_map_probe("jedec_probe", &info->map);
-        if (info->mtd == NULL)
-                info->mtd = do_map_probe("cfi_probe", &info->map);
-
-        if (info->mtd == NULL) {
-                printk(KERN_ERR PFX "map_probe() failed\n");
-                err = -ENXIO;
-                goto exit_error;
-        }
-
-        /* mark ourselves as the owner */
-        info->mtd->owner = THIS_MODULE;
-
-        err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0);
-        if (err > 0) {
-                err = add_mtd_partitions(info->mtd, info->partitions, err);
-                if (err)
-                        printk(KERN_ERR PFX "cannot add/parse partitions\n");
-        } else {
-                err = add_mtd_device(info->mtd);
-        }
-
-        if (err == 0)
-                return 0;
-
-        /* fall through to exit error */
-
- exit_error:
-        bast_flash_remove(pdev);
-        return err;
-}
-
-static struct platform_driver bast_flash_driver = {
-        .probe          = bast_flash_probe,
-        .remove         = bast_flash_remove,
-        .driver         = {
-                .name   = "bast-nor",
-                .owner  = THIS_MODULE,
-        },
-};
-
-static int __init bast_flash_init(void)
-{
-        printk("BAST NOR-Flash Driver, (c) 2004 Simtec Electronics\n");
-        return platform_driver_register(&bast_flash_driver);
-}
-
-static void __exit bast_flash_exit(void)
-{
-        platform_driver_unregister(&bast_flash_driver);
-}
-
-module_init(bast_flash_init);
-module_exit(bast_flash_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("BAST MTD Map driver");
-MODULE_ALIAS("platform:bast-nor");
diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c
new file mode 100644
index 000000000000..6fec86aaed7e
--- /dev/null
+++ b/drivers/mtd/maps/bfin-async-flash.c
@@ -0,0 +1,219 @@
+/*
+ * drivers/mtd/maps/bfin-async-flash.c
+ *
+ * Handle the case where flash memory and ethernet mac/phy are
+ * mapped onto the same async bank.  The BF533-STAMP does this
+ * for example.  All board-specific configuration goes in your
+ * board resources file.
+ *
+ * Copyright 2000 Nicolas Pitre <nico@cam.org>
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <asm/blackfin.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <asm/unaligned.h>
+
+#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
+
+#define DRIVER_NAME "bfin-async-flash"
+
+struct async_state {
+        struct mtd_info *mtd;
+        struct map_info map;
+        int enet_flash_pin;
+        uint32_t flash_ambctl0, flash_ambctl1;
+        uint32_t save_ambctl0, save_ambctl1;
+        unsigned long irq_flags;
+};
+
+static void switch_to_flash(struct async_state *state)
+{
+        local_irq_save(state->irq_flags);
+
+        gpio_set_value(state->enet_flash_pin, 0);
+
+        state->save_ambctl0 = bfin_read_EBIU_AMBCTL0();
+        state->save_ambctl1 = bfin_read_EBIU_AMBCTL1();
+        bfin_write_EBIU_AMBCTL0(state->flash_ambctl0);
+        bfin_write_EBIU_AMBCTL1(state->flash_ambctl1);
+        SSYNC();
+}
+
+static void switch_back(struct async_state *state)
+{
+        bfin_write_EBIU_AMBCTL0(state->save_ambctl0);
+        bfin_write_EBIU_AMBCTL1(state->save_ambctl1);
+        SSYNC();
+
+        gpio_set_value(state->enet_flash_pin, 1);
+
+        local_irq_restore(state->irq_flags);
+}
+
+static map_word bfin_read(struct map_info *map, unsigned long ofs)
+{
+        struct async_state *state = (struct async_state *)map->map_priv_1;
+        uint16_t word;
+        map_word test;
+
+        switch_to_flash(state);
+
+        word = readw(map->virt + ofs);
+
+        switch_back(state);
+
+        test.x[0] = word;
+        return test;
+}
+
+static void bfin_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+        struct async_state *state = (struct async_state *)map->map_priv_1;
+
+        switch_to_flash(state);
+
+        memcpy(to, map->virt + from, len);
+
+        switch_back(state);
+}
+
+static void bfin_write(struct map_info *map, map_word d1, unsigned long ofs)
+{
+        struct async_state *state = (struct async_state *)map->map_priv_1;
+        uint16_t d;
+
+        d = d1.x[0];
+
+        switch_to_flash(state);
+
+        writew(d, map->virt + ofs);
+        SSYNC();
+
+        switch_back(state);
+}
+
+static void bfin_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+        struct async_state *state = (struct async_state *)map->map_priv_1;
+
+        switch_to_flash(state);
+
+        memcpy(map->virt + to, from, len);
+        SSYNC();
+
+        switch_back(state);
+}
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+#endif
+
+static int __devinit bfin_flash_probe(struct platform_device *pdev)
+{
+        int ret;
+        struct physmap_flash_data *pdata = pdev->dev.platform_data;
+        struct resource *memory = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        struct resource *flash_ambctl = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+        struct async_state *state;
+
+        state = kzalloc(sizeof(*state), GFP_KERNEL);
+        if (!state)
+                return -ENOMEM;
+
+        state->map.name       = DRIVER_NAME;
+        state->map.read       = bfin_read;
+        state->map.copy_from  = bfin_copy_from;
+        state->map.write      = bfin_write;
+        state->map.copy_to    = bfin_copy_to;
+        state->map.bankwidth  = pdata->width;
+        state->map.size       = memory->end - memory->start + 1;
+        state->map.virt       = (void __iomem *)memory->start;
+        state->map.phys       = memory->start;
+        state->map.map_priv_1 = (unsigned long)state;
+        state->enet_flash_pin = platform_get_irq(pdev, 0);
+        state->flash_ambctl0  = flash_ambctl->start;
+        state->flash_ambctl1  = flash_ambctl->end;
+
+        if (gpio_request(state->enet_flash_pin, DRIVER_NAME)) {
+                pr_devinit(KERN_ERR DRIVER_NAME ": Failed to request gpio %d\n", state->enet_flash_pin);
+                return -EBUSY;
+        }
+        gpio_direction_output(state->enet_flash_pin, 1);
+
+        pr_devinit(KERN_NOTICE DRIVER_NAME ": probing %d-bit flash bus\n", state->map.bankwidth * 8);
+        state->mtd = do_map_probe(memory->name, &state->map);
+        if (!state->mtd)
+                return -ENXIO;
+
+#ifdef CONFIG_MTD_PARTITIONS
+        ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
+        if (ret > 0) {
+                pr_devinit(KERN_NOTICE DRIVER_NAME ": Using commandline partition definition\n");
+                add_mtd_partitions(state->mtd, pdata->parts, ret);
+
+        } else if (pdata->nr_parts) {
+                pr_devinit(KERN_NOTICE DRIVER_NAME ": Using board partition definition\n");
+                add_mtd_partitions(state->mtd, pdata->parts, pdata->nr_parts);
+
+        } else
+#endif
+        {
+                pr_devinit(KERN_NOTICE DRIVER_NAME ": no partition info available, registering whole flash at once\n");
+                add_mtd_device(state->mtd);
+        }
+
+        platform_set_drvdata(pdev, state);
+
+        return 0;
+}
+
+static int __devexit bfin_flash_remove(struct platform_device *pdev)
+{
+        struct async_state *state = platform_get_drvdata(pdev);
+        gpio_free(state->enet_flash_pin);
+#ifdef CONFIG_MTD_PARTITIONS
+        del_mtd_partitions(state->mtd);
+#endif
+        map_destroy(state->mtd);
+        kfree(state);
+        return 0;
+}
+
+static struct platform_driver bfin_flash_driver = {
+        .probe          = bfin_flash_probe,
+        .remove         = __devexit_p(bfin_flash_remove),
+        .driver         = {
+                .name   = DRIVER_NAME,
+        },
+};
+
+static int __init bfin_flash_init(void)
+{
+        return platform_driver_register(&bfin_flash_driver);
+}
+module_init(bfin_flash_init);
+
+static void __exit bfin_flash_exit(void)
+{
+        platform_driver_unregister(&bfin_flash_driver);
+}
+module_exit(bfin_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MTD map driver for Blackfins with flash/ethernet on same async bank");
diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c
index 9f17bb6c5a9d..cb507da0a87d 100644
--- a/drivers/mtd/maps/cdb89712.c
+++ b/drivers/mtd/maps/cdb89712.c
@@ -1,7 +1,6 @@
 /*
  * Flash on Cirrus CDB89712
  *
- * $Id: cdb89712.c,v 1.11 2005/11/07 11:14:26 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c
index 629e6e2641a8..6464d487eb1a 100644
--- a/drivers/mtd/maps/ceiva.c
+++ b/drivers/mtd/maps/ceiva.c
@@ -11,7 +11,6 @@
  *
  * (C) 2000 Nicolas Pitre <nico@cam.org>
  *
- * $Id: ceiva.c,v 1.11 2004/09/16 23:27:12 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c
index 65e5ee552010..0ecc3f6d735b 100644
--- a/drivers/mtd/maps/cfi_flagadm.c
+++ b/drivers/mtd/maps/cfi_flagadm.c
@@ -1,8 +1,6 @@
 /*
  *  Copyright © 2001 Flaga hf. Medical Devices, Kári Davíðsson <kd@flaga.is>
  *
- *  $Id: cfi_flagadm.c,v 1.15 2005/11/07 11:14:26 gleixner Exp $
- *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
diff --git a/drivers/mtd/maps/dbox2-flash.c b/drivers/mtd/maps/dbox2-flash.c
index 92a9c7fac993..e115667bf1d0 100644
--- a/drivers/mtd/maps/dbox2-flash.c
+++ b/drivers/mtd/maps/dbox2-flash.c
@@ -1,6 +1,4 @@
 /*
- * $Id: dbox2-flash.c,v 1.14 2005/11/07 11:14:26 gleixner Exp $
- *
  * D-Box 2 flash driver
  */
 
diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c
index b32bb9347d71..3aa018c092f8 100644
--- a/drivers/mtd/maps/dc21285.c
+++ b/drivers/mtd/maps/dc21285.c
@@ -4,8 +4,6 @@
  * (C) 2000  Nicolas Pitre <nico@cam.org>
  *
  * This code is GPL
- *
- * $Id: dc21285.c,v 1.24 2005/11/07 11:14:26 gleixner Exp $
  */
 #include <linux/module.h>
 #include <linux/types.h>
diff --git a/drivers/mtd/maps/dilnetpc.c b/drivers/mtd/maps/dilnetpc.c
index 1c3b34ad7325..0713e3a5a22c 100644
--- a/drivers/mtd/maps/dilnetpc.c
+++ b/drivers/mtd/maps/dilnetpc.c
@@ -14,8 +14,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
  *
- * $Id: dilnetpc.c,v 1.20 2005/11/07 11:14:26 gleixner Exp $
- *
  * The DIL/Net PC is a tiny embedded PC board made by SSV Embedded Systems
  * featuring the AMD Elan SC410 processor. There are two variants of this
  * board: DNP/1486 and ADNP/1486. The DNP version has 2 megs of flash
diff --git a/drivers/mtd/maps/dmv182.c b/drivers/mtd/maps/dmv182.c
index e0558b0b2fe6..d171674eb2ed 100644
--- a/drivers/mtd/maps/dmv182.c
+++ b/drivers/mtd/maps/dmv182.c
@@ -4,8 +4,6 @@
  *
  * Flash map driver for the Dy4 SVME182 board
  *
- * $Id: dmv182.c,v 1.6 2005/11/07 11:14:26 gleixner Exp $
- *
  * Copyright 2003-2004, TimeSys Corporation
  *
  * Based on the SVME181 flash map, by Tom Nelson, Dot4, Inc. for TimeSys Corp.
diff --git a/drivers/mtd/maps/ebony.c b/drivers/mtd/maps/ebony.c
index 1488bb92f26f..d92b7c70d3ed 100644
--- a/drivers/mtd/maps/ebony.c
+++ b/drivers/mtd/maps/ebony.c
@@ -1,6 +1,4 @@
 /*
- * $Id: ebony.c,v 1.16 2005/11/07 11:14:26 gleixner Exp $
- *
  * Mapping for Ebony user flash
  *
  * Matt Porter <mporter@kernel.crashing.org>
diff --git a/drivers/mtd/maps/edb7312.c b/drivers/mtd/maps/edb7312.c
index 1c5b97c89685..9433738c1664 100644
--- a/drivers/mtd/maps/edb7312.c
+++ b/drivers/mtd/maps/edb7312.c
@@ -1,6 +1,4 @@
 /*
- * $Id: edb7312.c,v 1.14 2005/11/07 11:14:27 gleixner Exp $
- *
  * Handle mapping of the NOR flash on Cogent EDB7312 boards
  *
  * Copyright 2002 SYSGO Real-Time Solutions GmbH
diff --git a/drivers/mtd/maps/fortunet.c b/drivers/mtd/maps/fortunet.c
index 7c50c271651c..a8e3fde4cbd5 100644
--- a/drivers/mtd/maps/fortunet.c
+++ b/drivers/mtd/maps/fortunet.c
@@ -1,6 +1,5 @@
 /* fortunet.c memory map
  *
- * $Id: fortunet.c,v 1.11 2005/11/07 11:14:27 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c
index 6dde3182d64a..ef8915474462 100644
--- a/drivers/mtd/maps/h720x-flash.c
+++ b/drivers/mtd/maps/h720x-flash.c
@@ -2,8 +2,6 @@
  * Flash memory access on Hynix GMS30C7201/HMS30C7202 based
  * evaluation boards
  *
- * $Id: h720x-flash.c,v 1.12 2005/11/07 11:14:27 gleixner Exp $
- *
  * (C) 2002 Jungjun Kim <jungjun.kim@hynix.com>
  *     2003 Thomas Gleixner <tglx@linutronix.de>
  */
diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c
index 2c884c49e84a..aeb6c916e23f 100644
--- a/drivers/mtd/maps/ichxrom.c
+++ b/drivers/mtd/maps/ichxrom.c
@@ -2,7 +2,6 @@
  * ichxrom.c
  *
  * Normal mappings of chips in physical memory
- * $Id: ichxrom.c,v 1.19 2005/11/07 11:14:27 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/impa7.c b/drivers/mtd/maps/impa7.c
index a0b4dc7155dc..2682ab51a367 100644
--- a/drivers/mtd/maps/impa7.c
+++ b/drivers/mtd/maps/impa7.c
@@ -1,6 +1,4 @@
 /*
- * $Id: impa7.c,v 1.14 2005/11/07 11:14:27 gleixner Exp $
- *
  * Handle mapping of the NOR flash on implementa A7 boards
  *
  * Copyright 2002 SYSGO Real-Time Solutions GmbH
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
index 325c8880c437..ee361aaadb1e 100644
--- a/drivers/mtd/maps/integrator-flash.c
+++ b/drivers/mtd/maps/integrator-flash.c
@@ -22,8 +22,6 @@
    This is access code for flashes using ARM's flash partitioning
    standards.
 
-   $Id: integrator-flash.c,v 1.20 2005/11/07 11:14:27 gleixner Exp $
-
 ======================================================================*/
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c
index f27c132794c3..a806119797e0 100644
--- a/drivers/mtd/maps/ipaq-flash.c
+++ b/drivers/mtd/maps/ipaq-flash.c
@@ -4,8 +4,6 @@
  * (C) 2000 Nicolas Pitre <nico@cam.org>
  * (C) 2002 Hewlett-Packard Company <jamey.hicks@hp.com>
  * (C) 2003 Christian Pellegrin <chri@ascensit.com>, <chri@infis.univ.ts.it>: concatenation of multiple flashes
- *
- * $Id: ipaq-flash.c,v 1.5 2005/11/07 11:14:27 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
index c8396b8574c4..c2264792a20b 100644
--- a/drivers/mtd/maps/ixp2000.c
+++ b/drivers/mtd/maps/ixp2000.c
@@ -1,6 +1,4 @@
 /*
- * $Id: ixp2000.c,v 1.9 2005/11/07 11:14:27 gleixner Exp $
- *
  * drivers/mtd/maps/ixp2000.c
  *
  * Mapping for the Intel XScale IXP2000 based systems
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c
index 01f19a4714b5..9c7a5fbd4e51 100644
--- a/drivers/mtd/maps/ixp4xx.c
+++ b/drivers/mtd/maps/ixp4xx.c
@@ -1,6 +1,4 @@
 /*
- * $Id: ixp4xx.c,v 1.13 2005/11/16 16:23:21 dvrabel Exp $
- *
  * drivers/mtd/maps/ixp4xx.c
  *
  * MTD Map file for IXP4XX based systems. Please do not make per-board
diff --git a/drivers/mtd/maps/l440gx.c b/drivers/mtd/maps/l440gx.c
index 67620adf4811..9e054503c4cf 100644
--- a/drivers/mtd/maps/l440gx.c
+++ b/drivers/mtd/maps/l440gx.c
@@ -1,6 +1,4 @@
 /*
- * $Id: l440gx.c,v 1.18 2005/11/07 11:14:27 gleixner Exp $
- *
  * BIOS Flash chip on Intel 440GX board.
  *
  * Bugs this currently does not work under linuxBIOS.
diff --git a/drivers/mtd/maps/map_funcs.c b/drivers/mtd/maps/map_funcs.c
index 9105e6ca0aa6..3f268370eeca 100644
--- a/drivers/mtd/maps/map_funcs.c
+++ b/drivers/mtd/maps/map_funcs.c
@@ -1,6 +1,4 @@
 /*
- * $Id: map_funcs.c,v 1.10 2005/06/06 23:04:36 tpoynor Exp $
- *
  * Out-of-line map I/O functions for simple maps when CONFIG_COMPLEX_MAPPINGS
  * is enabled.
  */
diff --git a/drivers/mtd/maps/mbx860.c b/drivers/mtd/maps/mbx860.c
index 06b118727846..706f67394b07 100644
--- a/drivers/mtd/maps/mbx860.c
+++ b/drivers/mtd/maps/mbx860.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mbx860.c,v 1.9 2005/11/07 11:14:27 gleixner Exp $
- *
  * Handle mapping of the flash on MBX860 boards
  *
  * Author:      Anton Todorov
diff --git a/drivers/mtd/maps/netsc520.c b/drivers/mtd/maps/netsc520.c
index 95dcab2146ad..c0cb319b2b70 100644
--- a/drivers/mtd/maps/netsc520.c
+++ b/drivers/mtd/maps/netsc520.c
@@ -3,8 +3,6 @@
  * Copyright (C) 2001 Mark Langsdorf (mark.langsdorf@amd.com)
  *      based on sc520cdp.c by Sysgo Real-Time Solutions GmbH
  *
- * $Id: netsc520.c,v 1.14 2005/11/07 11:14:27 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index 0c9b305a72e0..965e6c6d6ab0 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -5,8 +5,6 @@
  *
  *      (C) Copyright 2000-2001, Greg Ungerer (gerg@snapgear.com)
  *      (C) Copyright 2001-2002, SnapGear (www.snapgear.com)
- *
- *      $Id: nettel.c,v 1.12 2005/11/29 14:30:00 gleixner Exp $
  */
 
 /****************************************************************************/
diff --git a/drivers/mtd/maps/octagon-5066.c b/drivers/mtd/maps/octagon-5066.c
index a6642db3d325..43e04c1d22a9 100644
--- a/drivers/mtd/maps/octagon-5066.c
+++ b/drivers/mtd/maps/octagon-5066.c
@@ -1,4 +1,3 @@
-// $Id: octagon-5066.c,v 1.28 2005/11/07 11:14:27 gleixner Exp $
 /* ######################################################################
 
    Octagon 5066 MTD Driver.
diff --git a/drivers/mtd/maps/omap-toto-flash.c b/drivers/mtd/maps/omap-toto-flash.c
index e6e391efbeb6..0a60ebbc2175 100644
--- a/drivers/mtd/maps/omap-toto-flash.c
+++ b/drivers/mtd/maps/omap-toto-flash.c
@@ -4,8 +4,6 @@
  * jzhang@ti.com (C) 2003 Texas Instruments.
  *
  *  (C) 2002 MontVista Software, Inc.
- *
- * $Id: omap-toto-flash.c,v 1.5 2005/11/07 11:14:27 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
index d2ab1bae9c34..5c6a25c90380 100644
--- a/drivers/mtd/maps/pci.c
+++ b/drivers/mtd/maps/pci.c
@@ -7,8 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- *  $Id: pci.c,v 1.14 2005/11/17 08:20:27 dwmw2 Exp $
- *
  * Generic PCI memory map driver.  We support the following boards:
  *  - Intel IQ80310 ATU.
  *  - Intel EBSA285 (blank rom programming mode). Tested working 27/09/2001
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index 0cc31675aeb9..90924fb00481 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -1,6 +1,4 @@
 /*
- * $Id: pcmciamtd.c,v 1.55 2005/11/07 11:14:28 gleixner Exp $
- *
  * pcmciamtd.c - MTD driver for PCMCIA flash memory cards
  *
  * Author: Simon Evans <spse@secret.org.uk>
@@ -48,7 +46,6 @@ static const int debug = 0;
 
 
 #define DRIVER_DESC     "PCMCIA Flash memory card driver"
-#define DRIVER_VERSION  "$Revision: 1.55 $"
 
 /* Size of the PCMCIA address space: 26 bits = 64 MB */
 #define MAX_PCMCIA_ADDR 0x4000000
@@ -785,7 +782,7 @@ static struct pcmcia_driver pcmciamtd_driver = {
 
 static int __init init_pcmciamtd(void)
 {
-        info(DRIVER_DESC " " DRIVER_VERSION);
+        info(DRIVER_DESC);
 
         if(bankwidth && bankwidth != 1 && bankwidth != 2) {
                 info("bad bankwidth (%d), using default", bankwidth);
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 183255fcfdcb..42d844f8f6bf 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -1,6 +1,4 @@
 /*
- * $Id: physmap.c,v 1.39 2005/11/29 14:49:36 gleixner Exp $
- *
  * Normal mappings of chips in physical memory
  *
  * Copyright (C) 2003 MontaVista Software Inc.
@@ -203,7 +201,19 @@ static int physmap_flash_suspend(struct platform_device *dev, pm_message_t state
         int i;
 
         for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
-                ret |= info->mtd[i]->suspend(info->mtd[i]);
+                if (info->mtd[i]->suspend) {
+                        ret = info->mtd[i]->suspend(info->mtd[i]);
+                        if (ret)
+                                goto fail;
+                }
+
+        return 0;
+fail:
+        for (--i; i >= 0; --i)
+                if (info->mtd[i]->suspend) {
+                        BUG_ON(!info->mtd[i]->resume);
+                        info->mtd[i]->resume(info->mtd[i]);
+                }
 
         return ret;
 }
@@ -214,7 +224,8 @@ static int physmap_flash_resume(struct platform_device *dev)
         int i;
 
         for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
-                info->mtd[i]->resume(info->mtd[i]);
+                if (info->mtd[i]->resume)
+                        info->mtd[i]->resume(info->mtd[i]);
 
         return 0;
 }
@@ -225,8 +236,9 @@ static void physmap_flash_shutdown(struct platform_device *dev)
         int i;
 
         for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
-                if (info->mtd[i]->suspend(info->mtd[i]) == 0)
-                        info->mtd[i]->resume(info->mtd[i]);
+                if (info->mtd[i]->suspend && info->mtd[i]->resume)
+                        if (info->mtd[i]->suspend(info->mtd[i]) == 0)
+                                info->mtd[i]->resume(info->mtd[i]);
 }
 #else
 #define physmap_flash_suspend NULL
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 3eb2643b2328..e7dd9c8a965e 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -6,8 +6,6 @@
  *
  * Generic platfrom device based RAM map
  *
- * $Id: plat-ram.c,v 1.7 2005/11/07 11:14:28 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c
index 4d858b3d5f82..de002eb1a7fe 100644
--- a/drivers/mtd/maps/redwood.c
+++ b/drivers/mtd/maps/redwood.c
@@ -1,6 +1,4 @@
 /*
- * $Id: redwood.c,v 1.11 2005/11/07 11:14:28 gleixner Exp $
- *
  * drivers/mtd/maps/redwood.c
  *
  * FLASH map for the IBM Redwood 4/5/6 boards.
diff --git a/drivers/mtd/maps/rpxlite.c b/drivers/mtd/maps/rpxlite.c
index 809a0c8e7aaf..14d90edb4430 100644
--- a/drivers/mtd/maps/rpxlite.c
+++ b/drivers/mtd/maps/rpxlite.c
@@ -1,6 +1,4 @@
 /*
- * $Id: rpxlite.c,v 1.22 2004/11/04 13:24:15 gleixner Exp $
- *
  * Handle mapping of the flash on the RPX Lite and CLLF boards
  */
 
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index c7d5a52a2d55..e177a43dfff0 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -2,8 +2,6 @@
  * Flash memory access on SA11x0 based devices
  *
  * (C) 2000 Nicolas Pitre <nico@cam.org>
- *
- * $Id: sa1100-flash.c,v 1.51 2005/11/07 11:14:28 gleixner Exp $
  */
 #include <linux/module.h>
 #include <linux/types.h>
diff --git a/drivers/mtd/maps/sbc8240.c b/drivers/mtd/maps/sbc8240.c
index b8c1331b7a04..6e1e99cd2b59 100644
--- a/drivers/mtd/maps/sbc8240.c
+++ b/drivers/mtd/maps/sbc8240.c
@@ -4,9 +4,6 @@
  * Carolyn Smith, Tektronix, Inc.
  *
  * This code is GPLed
- *
- * $Id: sbc8240.c,v 1.5 2005/11/07 11:14:28 gleixner Exp $
- *
  */
 
 /*
diff --git a/drivers/mtd/maps/sbc_gxx.c b/drivers/mtd/maps/sbc_gxx.c
index 7cc4041d096d..1b1c0b7e11ef 100644
--- a/drivers/mtd/maps/sbc_gxx.c
+++ b/drivers/mtd/maps/sbc_gxx.c
@@ -17,8 +17,6 @@
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
 
-   $Id: sbc_gxx.c,v 1.35 2005/11/07 11:14:28 gleixner Exp $
-
 The SBC-MediaGX / SBC-GXx has up to 16 MiB of
 Intel StrataFlash (28F320/28F640) in x8 mode.
 
diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c
index 4045e372b90d..85c1e56309ec 100644
--- a/drivers/mtd/maps/sc520cdp.c
+++ b/drivers/mtd/maps/sc520cdp.c
@@ -16,8 +16,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
  *
- * $Id: sc520cdp.c,v 1.23 2005/11/17 08:20:27 dwmw2 Exp $
- *
  *
  * The SC520CDP is an evaluation board for the Elan SC520 processor available
  * from AMD. It has two banks of 32-bit Flash ROM, each 8 Megabytes in size,
diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c
index 0fc5584324e3..21169e6d646c 100644
--- a/drivers/mtd/maps/scb2_flash.c
+++ b/drivers/mtd/maps/scb2_flash.c
@@ -1,6 +1,5 @@
 /*
  * MTD map driver for BIOS Flash on Intel SCB2 boards
- * $Id: scb2_flash.c,v 1.12 2005/03/18 14:04:35 gleixner Exp $
  * Copyright (C) 2002 Sun Microsystems, Inc.
  * Tim Hockin <thockin@sun.com>
  *
diff --git a/drivers/mtd/maps/scx200_docflash.c b/drivers/mtd/maps/scx200_docflash.c
index 5e2bce22f37c..b5391ebb736e 100644
--- a/drivers/mtd/maps/scx200_docflash.c
+++ b/drivers/mtd/maps/scx200_docflash.c
@@ -2,8 +2,6 @@
 
    Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
 
-   $Id: scx200_docflash.c,v 1.12 2005/11/07 11:14:28 gleixner Exp $
-
    National Semiconductor SCx200 flash mapped with DOCCS
 */
 
diff --git a/drivers/mtd/maps/sharpsl-flash.c b/drivers/mtd/maps/sharpsl-flash.c
index 917dc778f24e..026eab028189 100644
--- a/drivers/mtd/maps/sharpsl-flash.c
+++ b/drivers/mtd/maps/sharpsl-flash.c
@@ -4,8 +4,6 @@
  * Copyright (C) 2001 Lineo Japan, Inc.
  * Copyright (C) 2002  SHARP
  *
- * $Id: sharpsl-flash.c,v 1.7 2005/11/07 11:14:28 gleixner Exp $
- *
  * based on rpxlite.c,v 1.15 2001/10/02 15:05:14 dwmw2 Exp
  *          Handle mapping of the flash on the RPX Lite and CLLF boards
  *
diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c
index d76ceef453ce..0eb41d9c6786 100644
--- a/drivers/mtd/maps/solutionengine.c
+++ b/drivers/mtd/maps/solutionengine.c
@@ -1,6 +1,4 @@
 /*
- * $Id: solutionengine.c,v 1.15 2005/11/07 11:14:28 gleixner Exp $
- *
  * Flash and EPROM on Hitachi Solution Engine and similar boards.
  *
  * (C) 2001 Red Hat, Inc.
diff --git a/drivers/mtd/maps/sun_uflash.c b/drivers/mtd/maps/sun_uflash.c
index 001af7f7ddda..0d7c88396c88 100644
--- a/drivers/mtd/maps/sun_uflash.c
+++ b/drivers/mtd/maps/sun_uflash.c
@@ -1,4 +1,4 @@
-/* $Id: sun_uflash.c,v 1.13 2005/11/07 11:14:28 gleixner Exp $
+/*
  *
  * sun_uflash - Driver implementation for user-programmable flash
  * present on many Sun Microsystems SME boardsets.
diff --git a/drivers/mtd/maps/tqm8xxl.c b/drivers/mtd/maps/tqm8xxl.c
index 521734057314..a5d3d8531faa 100644
--- a/drivers/mtd/maps/tqm8xxl.c
+++ b/drivers/mtd/maps/tqm8xxl.c
@@ -2,8 +2,6 @@
  * Handle mapping of the flash memory access routines
  * on TQM8xxL based devices.
  *
- * $Id: tqm8xxl.c,v 1.15 2005/11/07 11:14:28 gleixner Exp $
- *
  * based on rpxlite.c
  *
  * Copyright(C) 2001 Kirk Lee <kirk@hpc.ee.ntu.edu.tw>
diff --git a/drivers/mtd/maps/ts5500_flash.c b/drivers/mtd/maps/ts5500_flash.c
index b47270e850bc..e2147bf11c88 100644
--- a/drivers/mtd/maps/ts5500_flash.c
+++ b/drivers/mtd/maps/ts5500_flash.c
@@ -22,8 +22,6 @@
  * - Drive A and B use the resident flash disk (RFD) flash translation layer.
  * - If you have created your own jffs file system and the bios overwrites
  *   it during boot, try disabling Drive A: and B: in the boot order.
- *
- * $Id: ts5500_flash.c,v 1.5 2005/11/07 11:14:28 gleixner Exp $
  */
 
 #include <linux/init.h>
diff --git a/drivers/mtd/maps/tsunami_flash.c b/drivers/mtd/maps/tsunami_flash.c
index 0f915ac3102e..77a8bfc02577 100644
--- a/drivers/mtd/maps/tsunami_flash.c
+++ b/drivers/mtd/maps/tsunami_flash.c
@@ -2,7 +2,6 @@
  * tsunami_flash.c
  *
  * flash chip on alpha ds10...
- * $Id: tsunami_flash.c,v 1.10 2005/11/07 11:14:29 gleixner Exp $
  */
 #include <asm/io.h>
 #include <asm/core_tsunami.h>
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index 3fcf92130aa4..0dc645f8152f 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -4,8 +4,6 @@
  *      uclinux.c -- generic memory mapped MTD driver for uclinux
  *
  *      (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- *
- *      $Id: uclinux.c,v 1.12 2005/11/07 11:14:29 gleixner Exp $
  */
 
 /****************************************************************************/
diff --git a/drivers/mtd/maps/vmax301.c b/drivers/mtd/maps/vmax301.c
index b3e487395435..5a0c9a353b0f 100644
--- a/drivers/mtd/maps/vmax301.c
+++ b/drivers/mtd/maps/vmax301.c
@@ -1,4 +1,3 @@
-// $Id: vmax301.c,v 1.32 2005/11/07 11:14:29 gleixner Exp $
 /* ######################################################################
 
    Tempustech VMAX SBC301 MTD Driver.
diff --git a/drivers/mtd/maps/walnut.c b/drivers/mtd/maps/walnut.c
index ca932122fb64..e243476c8171 100644
--- a/drivers/mtd/maps/walnut.c
+++ b/drivers/mtd/maps/walnut.c
@@ -1,6 +1,4 @@
 /*
- * $Id: walnut.c,v 1.3 2005/11/07 11:14:29 gleixner Exp $
- *
  * Mapping for Walnut flash
  * (used ebony.c as a "framework")
  *
diff --git a/drivers/mtd/maps/wr_sbc82xx_flash.c b/drivers/mtd/maps/wr_sbc82xx_flash.c
index ac5b8105b6ef..413b0cf9bbd2 100644
--- a/drivers/mtd/maps/wr_sbc82xx_flash.c
+++ b/drivers/mtd/maps/wr_sbc82xx_flash.c
@@ -1,6 +1,4 @@
 /*
- * $Id: wr_sbc82xx_flash.c,v 1.8 2005/11/07 11:14:29 gleixner Exp $
- *
  * Map for flash chips on Wind River PowerQUICC II SBC82xx board.
  *
  * Copyright (C) 2004 Red Hat, Inc.
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 839eed8430a2..9ff007c4962c 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mtd_blkdevs.c,v 1.27 2005/11/07 11:14:20 gleixner Exp $
- *
  * (C) 2003 David Woodhouse <dwmw2@infradead.org>
  *
  * Interface to Linux 2.5 block layer for MTD 'translation layers'.
@@ -212,7 +210,7 @@ static struct block_device_operations mtd_blktrans_ops = {
 int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 {
         struct mtd_blktrans_ops *tr = new->tr;
-        struct list_head *this;
+        struct mtd_blktrans_dev *d;
         int last_devnum = -1;
         struct gendisk *gd;
 
@@ -221,8 +219,7 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
                 BUG();
         }
 
-        list_for_each(this, &tr->devs) {
-                struct mtd_blktrans_dev *d = list_entry(this, struct mtd_blktrans_dev, list);
+        list_for_each_entry(d, &tr->devs, list) {
                 if (new->devnum == -1) {
                         /* Use first free number */
                         if (d->devnum != last_devnum+1) {
@@ -309,33 +306,24 @@ int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
 
 static void blktrans_notify_remove(struct mtd_info *mtd)
 {
-        struct list_head *this, *this2, *next;
-
-        list_for_each(this, &blktrans_majors) {
-                struct mtd_blktrans_ops *tr = list_entry(this, struct mtd_blktrans_ops, list);
-
-                list_for_each_safe(this2, next, &tr->devs) {
-                        struct mtd_blktrans_dev *dev = list_entry(this2, struct mtd_blktrans_dev, list);
+        struct mtd_blktrans_ops *tr;
+        struct mtd_blktrans_dev *dev, *next;
 
+        list_for_each_entry(tr, &blktrans_majors, list)
+                list_for_each_entry_safe(dev, next, &tr->devs, list)
                         if (dev->mtd == mtd)
                                 tr->remove_dev(dev);
-                }
-        }
 }
 
 static void blktrans_notify_add(struct mtd_info *mtd)
 {
-        struct list_head *this;
+        struct mtd_blktrans_ops *tr;
 
         if (mtd->type == MTD_ABSENT)
                 return;
 
-        list_for_each(this, &blktrans_majors) {
-                struct mtd_blktrans_ops *tr = list_entry(this, struct mtd_blktrans_ops, list);
-
+        list_for_each_entry(tr, &blktrans_majors, list)
                 tr->add_mtd(tr, mtd);
-        }
-
 }
 
 static struct mtd_notifier blktrans_notifier = {
@@ -406,7 +394,7 @@ int register_mtd_blktrans(struct mtd_blktrans_ops *tr)
 
 int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr)
 {
-        struct list_head *this, *next;
+        struct mtd_blktrans_dev *dev, *next;
 
         mutex_lock(&mtd_table_mutex);
 
@@ -416,10 +404,8 @@ int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr)
         /* Remove it from the list of active majors */
         list_del(&tr->list);
 
-        list_for_each_safe(this, next, &tr->devs) {
-                struct mtd_blktrans_dev *dev = list_entry(this, struct mtd_blktrans_dev, list);
+        list_for_each_entry_safe(dev, next, &tr->devs, list)
                 tr->remove_dev(dev);
-        }
 
         blk_cleanup_queue(tr->blkcore_priv->rq);
         unregister_blkdev(tr->major, tr->name);
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index 952da30b1745..208c6faa0358 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -1,8 +1,6 @@
 /*
  * Direct MTD block device access
  *
- * $Id: mtdblock.c,v 1.68 2005/11/07 11:14:20 gleixner Exp $
- *
  * (C) 2000-2003 Nicolas Pitre <nico@cam.org>
  * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>
  */
diff --git a/drivers/mtd/mtdblock_ro.c b/drivers/mtd/mtdblock_ro.c
index f79dbb49b1a2..852165f8b1c3 100644
--- a/drivers/mtd/mtdblock_ro.c
+++ b/drivers/mtd/mtdblock_ro.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mtdblock_ro.c,v 1.19 2004/11/16 18:28:59 dwmw2 Exp $
- *
  * (C) 2003 David Woodhouse <dwmw2@infradead.org>
  *
  * Simple read-only (writable only for RAM) mtdblock driver
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index aef9f4b687c9..d2f331876e4c 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mtdchar.c,v 1.76 2005/11/07 11:14:20 gleixner Exp $
- *
  * Character-device access to raw MTD devices.
  *
  */
@@ -494,6 +492,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
         {
                 struct mtd_oob_buf buf;
                 struct mtd_oob_ops ops;
+                struct mtd_oob_buf __user *user_buf = argp;
                 uint32_t retlen;
 
                 if(!(file->f_mode & 2))
@@ -537,8 +536,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
                 if (ops.oobretlen > 0xFFFFFFFFU)
                         ret = -EOVERFLOW;
                 retlen = ops.oobretlen;
-                if (copy_to_user(&((struct mtd_oob_buf *)argp)->length,
-                                 &retlen, sizeof(buf.length)))
+                if (copy_to_user(&user_buf->length, &retlen, sizeof(buf.length)))
                         ret = -EFAULT;
 
                 kfree(ops.oobbuf);
@@ -592,29 +590,29 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 
         case MEMLOCK:
         {
-                struct erase_info_user info;
+                struct erase_info_user einfo;
 
-                if (copy_from_user(&info, argp, sizeof(info)))
+                if (copy_from_user(&einfo, argp, sizeof(einfo)))
                         return -EFAULT;
 
                 if (!mtd->lock)
                         ret = -EOPNOTSUPP;
                 else
-                        ret = mtd->lock(mtd, info.start, info.length);
+                        ret = mtd->lock(mtd, einfo.start, einfo.length);
                 break;
         }
 
         case MEMUNLOCK:
         {
-                struct erase_info_user info;
+                struct erase_info_user einfo;
 
-                if (copy_from_user(&info, argp, sizeof(info)))
+                if (copy_from_user(&einfo, argp, sizeof(einfo)))
                         return -EFAULT;
 
                 if (!mtd->unlock)
                         ret = -EOPNOTSUPP;
                 else
-                        ret = mtd->unlock(mtd, info.start, info.length);
+                        ret = mtd->unlock(mtd, einfo.start, einfo.length);
                 break;
         }
 
@@ -714,15 +712,15 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 
         case OTPLOCK:
         {
-                struct otp_info info;
+                struct otp_info oinfo;
 
                 if (mfi->mode != MTD_MODE_OTP_USER)
                         return -EINVAL;
-                if (copy_from_user(&info, argp, sizeof(info)))
+                if (copy_from_user(&oinfo, argp, sizeof(oinfo)))
                         return -EFAULT;
                 if (!mtd->lock_user_prot_reg)
                         return -EOPNOTSUPP;
-                ret = mtd->lock_user_prot_reg(mtd, info.start, info.length);
+                ret = mtd->lock_user_prot_reg(mtd, oinfo.start, oinfo.length);
                 break;
         }
 #endif
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index d563dcd4b264..2972a5edb73d 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -6,8 +6,6 @@
  * NAND support by Christian Gan <cgan@iders.ca>
  *
  * This code is GPL
- *
- * $Id: mtdconcat.c,v 1.11 2005/11/07 11:14:20 gleixner Exp $
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index f7e7890e5bc6..a9d246949820 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mtdcore.c,v 1.47 2005/11/07 11:14:20 gleixner Exp $
- *
  * Core registration and callback routines for MTD
  * drivers and users.
  *
@@ -53,7 +51,7 @@ int add_mtd_device(struct mtd_info *mtd)
 
         for (i=0; i < MAX_MTD_DEVICES; i++)
                 if (!mtd_table[i]) {
-                        struct list_head *this;
+                        struct mtd_notifier *not;
 
                         mtd_table[i] = mtd;
                         mtd->index = i;
@@ -72,10 +70,8 @@ int add_mtd_device(struct mtd_info *mtd)
                         DEBUG(0, "mtd: Giving out device %d to %s\n",i, mtd->name);
                         /* No need to get a refcount on the module containing
                            the notifier, since we hold the mtd_table_mutex */
-                        list_for_each(this, &mtd_notifiers) {
-                                struct mtd_notifier *not = list_entry(this, struct mtd_notifier, list);
+                        list_for_each_entry(not, &mtd_notifiers, list)
                                 not->add(mtd);
-                        }
 
                         mutex_unlock(&mtd_table_mutex);
                         /* We _know_ we aren't being removed, because
@@ -113,14 +109,12 @@ int del_mtd_device (struct mtd_info *mtd)
                        mtd->index, mtd->name, mtd->usecount);
                 ret = -EBUSY;
         } else {
-                struct list_head *this;
+                struct mtd_notifier *not;
 
                 /* No need to get a refcount on the module containing
                    the notifier, since we hold the mtd_table_mutex */
-                list_for_each(this, &mtd_notifiers) {
-                        struct mtd_notifier *not = list_entry(this, struct mtd_notifier, list);
+                list_for_each_entry(not, &mtd_notifiers, list)
                         not->remove(mtd);
-                }
 
                 mtd_table[mtd->index] = NULL;
 
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 07c701169344..edb90b58a9b1 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -5,8 +5,6 @@
  *
  * This code is GPL
  *
- * $Id: mtdpart.c,v 1.55 2005/11/07 11:14:20 gleixner Exp $
- *
  *      02-21-2002      Thomas Gleixner <gleixner@autronix.de>
  *                      added support for read_oob, write_oob
  */
@@ -46,8 +44,8 @@ struct mtd_part {
  * to the _real_ device.
  */
 
-static int part_read (struct mtd_info *mtd, loff_t from, size_t len,
-                        size_t *retlen, u_char *buf)
+static int part_read(struct mtd_info *mtd, loff_t from, size_t len,
+                size_t *retlen, u_char *buf)
 {
         struct mtd_part *part = PART(mtd);
         int res;
@@ -56,7 +54,7 @@ static int part_read (struct mtd_info *mtd, loff_t from, size_t len,
                 len = 0;
         else if (from + len > mtd->size)
                 len = mtd->size - from;
-        res = part->master->read (part->master, from + part->offset,
+        res = part->master->read(part->master, from + part->offset,
                                    len, retlen, buf);
         if (unlikely(res)) {
                 if (res == -EUCLEAN)
@@ -67,8 +65,8 @@ static int part_read (struct mtd_info *mtd, loff_t from, size_t len,
         return res;
 }
 
-static int part_point (struct mtd_info *mtd, loff_t from, size_t len,
-                        size_t *retlen, void **virt, resource_size_t *phys)
+static int part_point(struct mtd_info *mtd, loff_t from, size_t len,
+                size_t *retlen, void **virt, resource_size_t *phys)
 {
         struct mtd_part *part = PART(mtd);
         if (from >= mtd->size)
@@ -87,7 +85,7 @@ static void part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 }
 
 static int part_read_oob(struct mtd_info *mtd, loff_t from,
-                         struct mtd_oob_ops *ops)
+                struct mtd_oob_ops *ops)
 {
         struct mtd_part *part = PART(mtd);
         int res;
@@ -107,38 +105,38 @@ static int part_read_oob(struct mtd_info *mtd, loff_t from,
         return res;
 }
 
-static int part_read_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len,
-                        size_t *retlen, u_char *buf)
+static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
+                size_t len, size_t *retlen, u_char *buf)
 {
         struct mtd_part *part = PART(mtd);
-        return part->master->read_user_prot_reg (part->master, from,
+        return part->master->read_user_prot_reg(part->master, from,
                                         len, retlen, buf);
 }
 
-static int part_get_user_prot_info (struct mtd_info *mtd,
-                                    struct otp_info *buf, size_t len)
+static int part_get_user_prot_info(struct mtd_info *mtd,
+                struct otp_info *buf, size_t len)
 {
         struct mtd_part *part = PART(mtd);
-        return part->master->get_user_prot_info (part->master, buf, len);
+        return part->master->get_user_prot_info(part->master, buf, len);
 }
 
-static int part_read_fact_prot_reg (struct mtd_info *mtd, loff_t from, size_t len,
-                        size_t *retlen, u_char *buf)
+static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
+                size_t len, size_t *retlen, u_char *buf)
 {
         struct mtd_part *part = PART(mtd);
-        return part->master->read_fact_prot_reg (part->master, from,
+        return part->master->read_fact_prot_reg(part->master, from,
                                         len, retlen, buf);
 }
 
-static int part_get_fact_prot_info (struct mtd_info *mtd,
-                                    struct otp_info *buf, size_t len)
+static int part_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
+                size_t len)
 {
         struct mtd_part *part = PART(mtd);
-        return part->master->get_fact_prot_info (part->master, buf, len);
+        return part->master->get_fact_prot_info(part->master, buf, len);
 }
 
-static int part_write (struct mtd_info *mtd, loff_t to, size_t len,
-                        size_t *retlen, const u_char *buf)
+static int part_write(struct mtd_info *mtd, loff_t to, size_t len,
+                size_t *retlen, const u_char *buf)
 {
         struct mtd_part *part = PART(mtd);
         if (!(mtd->flags & MTD_WRITEABLE))
@@ -147,12 +145,12 @@ static int part_write (struct mtd_info *mtd, loff_t to, size_t len,
                 len = 0;
         else if (to + len > mtd->size)
                 len = mtd->size - to;
-        return part->master->write (part->master, to + part->offset,
+        return part->master->write(part->master, to + part->offset,
                                     len, retlen, buf);
 }
 
-static int part_panic_write (struct mtd_info *mtd, loff_t to, size_t len,
-                        size_t *retlen, const u_char *buf)
+static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
+                size_t *retlen, const u_char *buf)
 {
         struct mtd_part *part = PART(mtd);
         if (!(mtd->flags & MTD_WRITEABLE))
@@ -161,12 +159,12 @@ static int part_panic_write (struct mtd_info *mtd, loff_t to, size_t len,
                 len = 0;
         else if (to + len > mtd->size)
                 len = mtd->size - to;
-        return part->master->panic_write (part->master, to + part->offset,
+        return part->master->panic_write(part->master, to + part->offset,
                                     len, retlen, buf);
 }
 
 static int part_write_oob(struct mtd_info *mtd, loff_t to,
-                         struct mtd_oob_ops *ops)
+                struct mtd_oob_ops *ops)
 {
         struct mtd_part *part = PART(mtd);
 
@@ -180,31 +178,32 @@ static int part_write_oob(struct mtd_info *mtd, loff_t to,
         return part->master->write_oob(part->master, to + part->offset, ops);
 }
 
-static int part_write_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len,
-                        size_t *retlen, u_char *buf)
+static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
+                size_t len, size_t *retlen, u_char *buf)
 {
         struct mtd_part *part = PART(mtd);
-        return part->master->write_user_prot_reg (part->master, from,
+        return part->master->write_user_prot_reg(part->master, from,
                                         len, retlen, buf);
 }
 
-static int part_lock_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len)
+static int part_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
+                size_t len)
 {
         struct mtd_part *part = PART(mtd);
-        return part->master->lock_user_prot_reg (part->master, from, len);
+        return part->master->lock_user_prot_reg(part->master, from, len);
 }
 
-static int part_writev (struct mtd_info *mtd,  const struct kvec *vecs,
-                         unsigned long count, loff_t to, size_t *retlen)
+static int part_writev(struct mtd_info *mtd, const struct kvec *vecs,
+                unsigned long count, loff_t to, size_t *retlen)
 {
         struct mtd_part *part = PART(mtd);
         if (!(mtd->flags & MTD_WRITEABLE))
                 return -EROFS;
-        return part->master->writev (part->master, vecs, count,
+        return part->master->writev(part->master, vecs, count,
                                         to + part->offset, retlen);
 }
 
-static int part_erase (struct mtd_info *mtd, struct erase_info *instr)
+static int part_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
         struct mtd_part *part = PART(mtd);
         int ret;
@@ -236,7 +235,7 @@ void mtd_erase_callback(struct erase_info *instr)
 }
 EXPORT_SYMBOL_GPL(mtd_erase_callback);
 
-static int part_lock (struct mtd_info *mtd, loff_t ofs, size_t len)
+static int part_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
 {
         struct mtd_part *part = PART(mtd);
         if ((len + ofs) > mtd->size)
@@ -244,7 +243,7 @@ static int part_lock (struct mtd_info *mtd, loff_t ofs, size_t len)
         return part->master->lock(part->master, ofs + part->offset, len);
 }
 
-static int part_unlock (struct mtd_info *mtd, loff_t ofs, size_t len)
+static int part_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
 {
         struct mtd_part *part = PART(mtd);
         if ((len + ofs) > mtd->size)
@@ -270,7 +269,7 @@ static void part_resume(struct mtd_info *mtd)
         part->master->resume(part->master);
 }
 
-static int part_block_isbad (struct mtd_info *mtd, loff_t ofs)
+static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
 {
         struct mtd_part *part = PART(mtd);
         if (ofs >= mtd->size)
@@ -279,7 +278,7 @@ static int part_block_isbad (struct mtd_info *mtd, loff_t ofs)
         return part->master->block_isbad(part->master, ofs);
 }
 
-static int part_block_markbad (struct mtd_info *mtd, loff_t ofs)
+static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
         struct mtd_part *part = PART(mtd);
         int res;
@@ -302,229 +301,237 @@ static int part_block_markbad (struct mtd_info *mtd, loff_t ofs)
 
 int del_mtd_partitions(struct mtd_info *master)
 {
-        struct list_head *node;
-        struct mtd_part *slave;
+        struct mtd_part *slave, *next;
 
-        for (node = mtd_partitions.next;
-             node != &mtd_partitions;
-             node = node->next) {
-                slave = list_entry(node, struct mtd_part, list);
+        list_for_each_entry_safe(slave, next, &mtd_partitions, list)
                 if (slave->master == master) {
-                        struct list_head *prev = node->prev;
-                        __list_del(prev, node->next);
-                        if(slave->registered)
+                        list_del(&slave->list);
+                        if (slave->registered)
                                 del_mtd_device(&slave->mtd);
                         kfree(slave);
-                        node = prev;
                 }
-        }
 
         return 0;
 }
+EXPORT_SYMBOL(del_mtd_partitions);
 
-/*
- * This function, given a master MTD object and a partition table, creates
- * and registers slave MTD objects which are bound to the master according to
- * the partition definitions.
- * (Q: should we register the master MTD object as well?)
- */
-
-int add_mtd_partitions(struct mtd_info *master,
-                       const struct mtd_partition *parts,
-                       int nbparts)
+static struct mtd_part *add_one_partition(struct mtd_info *master,
+                const struct mtd_partition *part, int partno,
+                u_int32_t cur_offset)
 {
         struct mtd_part *slave;
-        u_int32_t cur_offset = 0;
-        int i;
-
-        printk (KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
-
-        for (i = 0; i < nbparts; i++) {
 
-                /* allocate the partition structure */
-                slave = kzalloc (sizeof(*slave), GFP_KERNEL);
-                if (!slave) {
-                        printk ("memory allocation error while creating partitions for \"%s\"\n",
-                                master->name);
-                        del_mtd_partitions(master);
-                        return -ENOMEM;
-                }
-                list_add(&slave->list, &mtd_partitions);
+        /* allocate the partition structure */
+        slave = kzalloc(sizeof(*slave), GFP_KERNEL);
+        if (!slave) {
+                printk(KERN_ERR"memory allocation error while creating partitions for \"%s\"\n",
+                        master->name);
+                del_mtd_partitions(master);
+                return NULL;
+        }
+        list_add(&slave->list, &mtd_partitions);
 
-                /* set up the MTD object for this partition */
-                slave->mtd.type = master->type;
-                slave->mtd.flags = master->flags & ~parts[i].mask_flags;
-                slave->mtd.size = parts[i].size;
-                slave->mtd.writesize = master->writesize;
-                slave->mtd.oobsize = master->oobsize;
-                slave->mtd.oobavail = master->oobavail;
-                slave->mtd.subpage_sft = master->subpage_sft;
+        /* set up the MTD object for this partition */
+        slave->mtd.type = master->type;
+        slave->mtd.flags = master->flags & ~part->mask_flags;
+        slave->mtd.size = part->size;
+        slave->mtd.writesize = master->writesize;
+        slave->mtd.oobsize = master->oobsize;
+        slave->mtd.oobavail = master->oobavail;
+        slave->mtd.subpage_sft = master->subpage_sft;
 
-                slave->mtd.name = parts[i].name;
-                slave->mtd.owner = master->owner;
+        slave->mtd.name = part->name;
+        slave->mtd.owner = master->owner;
 
-                slave->mtd.read = part_read;
-                slave->mtd.write = part_write;
+        slave->mtd.read = part_read;
+        slave->mtd.write = part_write;
 
-                if (master->panic_write)
-                        slave->mtd.panic_write = part_panic_write;
+        if (master->panic_write)
+                slave->mtd.panic_write = part_panic_write;
 
-                if(master->point && master->unpoint){
-                        slave->mtd.point = part_point;
-                        slave->mtd.unpoint = part_unpoint;
-                }
+        if (master->point && master->unpoint) {
+                slave->mtd.point = part_point;
+                slave->mtd.unpoint = part_unpoint;
+        }
 
-                if (master->read_oob)
-                        slave->mtd.read_oob = part_read_oob;
-                if (master->write_oob)
-                        slave->mtd.write_oob = part_write_oob;
-                if(master->read_user_prot_reg)
-                        slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
-                if(master->read_fact_prot_reg)
-                        slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
-                if(master->write_user_prot_reg)
-                        slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
-                if(master->lock_user_prot_reg)
-                        slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
-                if(master->get_user_prot_info)
-                        slave->mtd.get_user_prot_info = part_get_user_prot_info;
-                if(master->get_fact_prot_info)
-                        slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
-                if (master->sync)
-                        slave->mtd.sync = part_sync;
-                if (!i && master->suspend && master->resume) {
-                                slave->mtd.suspend = part_suspend;
-                                slave->mtd.resume = part_resume;
+        if (master->read_oob)
+                slave->mtd.read_oob = part_read_oob;
+        if (master->write_oob)
+                slave->mtd.write_oob = part_write_oob;
+        if (master->read_user_prot_reg)
+                slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
+        if (master->read_fact_prot_reg)
+                slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
+        if (master->write_user_prot_reg)
+                slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
+        if (master->lock_user_prot_reg)
+                slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
+        if (master->get_user_prot_info)
+                slave->mtd.get_user_prot_info = part_get_user_prot_info;
+        if (master->get_fact_prot_info)
+                slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
+        if (master->sync)
+                slave->mtd.sync = part_sync;
+        if (!partno && master->suspend && master->resume) {
+                        slave->mtd.suspend = part_suspend;
+                        slave->mtd.resume = part_resume;
+        }
+        if (master->writev)
+                slave->mtd.writev = part_writev;
+        if (master->lock)
+                slave->mtd.lock = part_lock;
+        if (master->unlock)
+                slave->mtd.unlock = part_unlock;
+        if (master->block_isbad)
+                slave->mtd.block_isbad = part_block_isbad;
+        if (master->block_markbad)
+                slave->mtd.block_markbad = part_block_markbad;
+        slave->mtd.erase = part_erase;
+        slave->master = master;
+        slave->offset = part->offset;
+        slave->index = partno;
+
+        if (slave->offset == MTDPART_OFS_APPEND)
+                slave->offset = cur_offset;
+        if (slave->offset == MTDPART_OFS_NXTBLK) {
+                slave->offset = cur_offset;
+                if ((cur_offset % master->erasesize) != 0) {
+                        /* Round up to next erasesize */
+                        slave->offset = ((cur_offset / master->erasesize) + 1) * master->erasesize;
+                        printk(KERN_NOTICE "Moving partition %d: "
+                               "0x%08x -> 0x%08x\n", partno,
+                               cur_offset, slave->offset);
                 }
-                if (master->writev)
-                        slave->mtd.writev = part_writev;
-                if (master->lock)
-                        slave->mtd.lock = part_lock;
-                if (master->unlock)
-                        slave->mtd.unlock = part_unlock;
-                if (master->block_isbad)
-                        slave->mtd.block_isbad = part_block_isbad;
-                if (master->block_markbad)
-                        slave->mtd.block_markbad = part_block_markbad;
-                slave->mtd.erase = part_erase;
-                slave->master = master;
-                slave->offset = parts[i].offset;
-                slave->index = i;
-
-                if (slave->offset == MTDPART_OFS_APPEND)
-                        slave->offset = cur_offset;
-                if (slave->offset == MTDPART_OFS_NXTBLK) {
-                        slave->offset = cur_offset;
-                        if ((cur_offset % master->erasesize) != 0) {
-                                /* Round up to next erasesize */
-                                slave->offset = ((cur_offset / master->erasesize) + 1) * master->erasesize;
-                                printk(KERN_NOTICE "Moving partition %d: "
-                                       "0x%08x -> 0x%08x\n", i,
-                                       cur_offset, slave->offset);
+        }
+        if (slave->mtd.size == MTDPART_SIZ_FULL)
+                slave->mtd.size = master->size - slave->offset;
+
+        printk(KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset,
+                slave->offset + slave->mtd.size, slave->mtd.name);
+
+        /* let's do some sanity checks */
+        if (slave->offset >= master->size) {
+                /* let's register it anyway to preserve ordering */
+                slave->offset = 0;
+                slave->mtd.size = 0;
+                printk(KERN_ERR"mtd: partition \"%s\" is out of reach -- disabled\n",
+                        part->name);
+                goto out_register;
+        }
+        if (slave->offset + slave->mtd.size > master->size) {
+                slave->mtd.size = master->size - slave->offset;
+                printk(KERN_WARNING"mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n",
+                        part->name, master->name, slave->mtd.size);
+        }
+        if (master->numeraseregions > 1) {
+                /* Deal with variable erase size stuff */
+                int i, max = master->numeraseregions;
+                u32 end = slave->offset + slave->mtd.size;
+                struct mtd_erase_region_info *regions = master->eraseregions;
+
+                /* Find the first erase regions which is part of this
+                 * partition. */
+                for (i = 0; i < max && regions[i].offset <= slave->offset; i++)
+                        ;
+                /* The loop searched for the region _behind_ the first one */
+                i--;
+
+                /* Pick biggest erasesize */
+                for (; i < max && regions[i].offset < end; i++) {
+                        if (slave->mtd.erasesize < regions[i].erasesize) {
+                                slave->mtd.erasesize = regions[i].erasesize;
                         }
                 }
-                if (slave->mtd.size == MTDPART_SIZ_FULL)
-                        slave->mtd.size = master->size - slave->offset;
-                cur_offset = slave->offset + slave->mtd.size;
+                BUG_ON(slave->mtd.erasesize == 0);
+        } else {
+                /* Single erase size */
+                slave->mtd.erasesize = master->erasesize;
+        }
 
-                printk (KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset,
-                        slave->offset + slave->mtd.size, slave->mtd.name);
+        if ((slave->mtd.flags & MTD_WRITEABLE) &&
+            (slave->offset % slave->mtd.erasesize)) {
+                /* Doesn't start on a boundary of major erase size */
+                /* FIXME: Let it be writable if it is on a boundary of
+                 * _minor_ erase size though */
+                slave->mtd.flags &= ~MTD_WRITEABLE;
+                printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+                        part->name);
+        }
+        if ((slave->mtd.flags & MTD_WRITEABLE) &&
+            (slave->mtd.size % slave->mtd.erasesize)) {
+                slave->mtd.flags &= ~MTD_WRITEABLE;
+                printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+                        part->name);
+        }
 
-                /* let's do some sanity checks */
-                if (slave->offset >= master->size) {
-                                /* let's register it anyway to preserve ordering */
-                        slave->offset = 0;
-                        slave->mtd.size = 0;
-                        printk ("mtd: partition \"%s\" is out of reach -- disabled\n",
-                                parts[i].name);
-                }
-                if (slave->offset + slave->mtd.size > master->size) {
-                        slave->mtd.size = master->size - slave->offset;
-                        printk ("mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n",
-                                parts[i].name, master->name, slave->mtd.size);
-                }
-                if (master->numeraseregions>1) {
-                        /* Deal with variable erase size stuff */
-                        int i;
-                        struct mtd_erase_region_info *regions = master->eraseregions;
-
-                        /* Find the first erase regions which is part of this partition. */
-                        for (i=0; i < master->numeraseregions && slave->offset >= regions[i].offset; i++)
-                                ;
-
-                        for (i--; i < master->numeraseregions && slave->offset + slave->mtd.size > regions[i].offset; i++) {
-                                if (slave->mtd.erasesize < regions[i].erasesize) {
-                                        slave->mtd.erasesize = regions[i].erasesize;
-                                }
-                        }
-                } else {
-                        /* Single erase size */
-                        slave->mtd.erasesize = master->erasesize;
-                }
+        slave->mtd.ecclayout = master->ecclayout;
+        if (master->block_isbad) {
+                uint32_t offs = 0;
 
-                if ((slave->mtd.flags & MTD_WRITEABLE) &&
-                    (slave->offset % slave->mtd.erasesize)) {
-                        /* Doesn't start on a boundary of major erase size */
-                        /* FIXME: Let it be writable if it is on a boundary of _minor_ erase size though */
-                        slave->mtd.flags &= ~MTD_WRITEABLE;
-                        printk ("mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
-                                parts[i].name);
-                }
-                if ((slave->mtd.flags & MTD_WRITEABLE) &&
-                    (slave->mtd.size % slave->mtd.erasesize)) {
-                        slave->mtd.flags &= ~MTD_WRITEABLE;
-                        printk ("mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
-                                parts[i].name);
+                while (offs < slave->mtd.size) {
+                        if (master->block_isbad(master,
+                                                offs + slave->offset))
+                                slave->mtd.ecc_stats.badblocks++;
+                        offs += slave->mtd.erasesize;
                 }
+        }
 
-                slave->mtd.ecclayout = master->ecclayout;
-                if (master->block_isbad) {
-                        uint32_t offs = 0;
+out_register:
+        if (part->mtdp) {
+                /* store the object pointer (caller may or may not register it*/
+                *part->mtdp = &slave->mtd;
+                slave->registered = 0;
+        } else {
+                /* register our partition */
+                add_mtd_device(&slave->mtd);
+                slave->registered = 1;
+        }
+        return slave;
+}
 
-                        while(offs < slave->mtd.size) {
-                                if (master->block_isbad(master,
-                                                        offs + slave->offset))
-                                        slave->mtd.ecc_stats.badblocks++;
-                                offs += slave->mtd.erasesize;
-                        }
-                }
+/*
+ * This function, given a master MTD object and a partition table, creates
+ * and registers slave MTD objects which are bound to the master according to
+ * the partition definitions.
+ * (Q: should we register the master MTD object as well?)
+ */
 
-                if(parts[i].mtdp)
-                {       /* store the object pointer (caller may or may not register it */
-                        *parts[i].mtdp = &slave->mtd;
-                        slave->registered = 0;
-                }
-                else
-                {
-                        /* register our partition */
-                        add_mtd_device(&slave->mtd);
-                        slave->registered = 1;
-                }
+int add_mtd_partitions(struct mtd_info *master,
+                       const struct mtd_partition *parts,
+                       int nbparts)
+{
+        struct mtd_part *slave;
+        u_int32_t cur_offset = 0;
+        int i;
+
+        printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
+
+        for (i = 0; i < nbparts; i++) {
+                slave = add_one_partition(master, parts + i, i, cur_offset);
+                if (!slave)
+                        return -ENOMEM;
+                cur_offset = slave->offset + slave->mtd.size;
         }
 
         return 0;
 }
-
 EXPORT_SYMBOL(add_mtd_partitions);
-EXPORT_SYMBOL(del_mtd_partitions);
 
 static DEFINE_SPINLOCK(part_parser_lock);
 static LIST_HEAD(part_parsers);
 
 static struct mtd_part_parser *get_partition_parser(const char *name)
 {
-        struct list_head *this;
-        void *ret = NULL;
-        spin_lock(&part_parser_lock);
+        struct mtd_part_parser *p, *ret = NULL;
 
-        list_for_each(this, &part_parsers) {
-                struct mtd_part_parser *p = list_entry(this, struct mtd_part_parser, list);
+        spin_lock(&part_parser_lock);
 
+        list_for_each_entry(p, &part_parsers, list)
                 if (!strcmp(p->name, name) && try_module_get(p->owner)) {
                         ret = p;
                         break;
                 }
-        }
+
         spin_unlock(&part_parser_lock);
 
         return ret;
@@ -538,6 +545,7 @@ int register_mtd_parser(struct mtd_part_parser *p)
 
         return 0;
 }
+EXPORT_SYMBOL_GPL(register_mtd_parser);
 
 int deregister_mtd_parser(struct mtd_part_parser *p)
 {
@@ -546,6 +554,7 @@ int deregister_mtd_parser(struct mtd_part_parser *p)
         spin_unlock(&part_parser_lock);
         return 0;
 }
+EXPORT_SYMBOL_GPL(deregister_mtd_parser);
 
 int parse_mtd_partitions(struct mtd_info *master, const char **types,
                          struct mtd_partition **pparts, unsigned long origin)
@@ -573,7 +582,4 @@ int parse_mtd_partitions(struct mtd_info *master, const char **types,
         }
         return ret;
 }
-
 EXPORT_SYMBOL_GPL(parse_mtd_partitions);
-EXPORT_SYMBOL_GPL(register_mtd_parser);
-EXPORT_SYMBOL_GPL(deregister_mtd_parser);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 5076faf9ca66..71406e517857 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1,5 +1,4 @@
 # drivers/mtd/nand/Kconfig
-# $Id: Kconfig,v 1.35 2005/11/07 11:14:30 gleixner Exp $
 
 menuconfig MTD_NAND
         tristate "NAND Device Support"
@@ -272,22 +271,23 @@ config MTD_NAND_CS553X
 
           If you say "m", the module will be called "cs553x_nand.ko".
 
-config MTD_NAND_AT91
-        bool "Support for NAND Flash / SmartMedia on AT91"
-        depends on ARCH_AT91
+config MTD_NAND_ATMEL
+        tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32"
+        depends on ARCH_AT91 || AVR32
         help
           Enables support for NAND Flash / Smart Media Card interface
-          on Atmel AT91 processors.
+          on Atmel AT91 and AVR32 processors.
 choice
-        prompt "ECC management for NAND Flash / SmartMedia on AT91"
-        depends on MTD_NAND_AT91
+        prompt "ECC management for NAND Flash / SmartMedia on AT91 / AVR32"
+        depends on MTD_NAND_ATMEL
 
-config MTD_NAND_AT91_ECC_HW
+config MTD_NAND_ATMEL_ECC_HW
         bool "Hardware ECC"
-        depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260
+        depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
         help
-          Uses hardware ECC provided by the at91sam9260/at91sam9263 chip
-          instead of software ECC.
+          Use hardware ECC instead of software ECC when the chip
+          supports it.
+
           The hardware ECC controller is capable of single bit error
           correction and 2-bit random detection per page.
 
@@ -297,16 +297,16 @@ config MTD_NAND_AT91_ECC_HW
 
           If unsure, say Y
 
-config MTD_NAND_AT91_ECC_SOFT
+config MTD_NAND_ATMEL_ECC_SOFT
         bool "Software ECC"
         help
-          Uses software ECC.
+          Use software ECC.
 
           NB : hardware and software ECC schemes are incompatible.
           If you switch from one to another, you'll have to erase your
           mtd partition.
 
-config MTD_NAND_AT91_ECC_NONE
+config MTD_NAND_ATMEL_ECC_NONE
         bool "No ECC (testing only, DANGEROUS)"
         depends on DEBUG_KERNEL
         help
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index a6e74a46992a..d772581de573 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -1,7 +1,6 @@
 #
 # linux/drivers/nand/Makefile
 #
-# $Id: Makefile.common,v 1.15 2004/11/26 12:28:22 dedekind Exp $
 
 obj-$(CONFIG_MTD_NAND)                  += nand.o nand_ecc.o
 obj-$(CONFIG_MTD_NAND_IDS)              += nand_ids.o
@@ -24,7 +23,7 @@ obj-$(CONFIG_MTD_NAND_TS7250)		+= ts7250.o
 obj-$(CONFIG_MTD_NAND_NANDSIM)          += nandsim.o
 obj-$(CONFIG_MTD_NAND_CS553X)           += cs553x_nand.o
 obj-$(CONFIG_MTD_NAND_NDFC)             += ndfc.o
-obj-$(CONFIG_MTD_NAND_AT91)             += at91_nand.o
+obj-$(CONFIG_MTD_NAND_ATMEL)            += atmel_nand.o
 obj-$(CONFIG_MTD_NAND_CM_X270)          += cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)    += excite_nandflash.o
 obj-$(CONFIG_MTD_NAND_PXA3xx)           += pxa3xx_nand.o
diff --git a/drivers/mtd/nand/at91_nand.c b/drivers/mtd/nand/atmel_nand.c
index 0adb287027a2..99aec46e2145 100644
--- a/drivers/mtd/nand/at91_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1,6 +1,4 @@
 /*
- * drivers/mtd/nand/at91_nand.c
- *
  *  Copyright (C) 2003 Rick Bronson
  *
  *  Derived from drivers/mtd/nand/autcpu12.c
@@ -31,20 +29,19 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/io.h>
-#include <asm/sizes.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <asm/arch/cpu.h>
 
-#ifdef CONFIG_MTD_NAND_AT91_ECC_HW
+#ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
 #define hard_ecc        1
 #else
 #define hard_ecc        0
 #endif
 
-#ifdef CONFIG_MTD_NAND_AT91_ECC_NONE
+#ifdef CONFIG_MTD_NAND_ATMEL_ECC_NONE
 #define no_ecc          1
 #else
 #define no_ecc          0
@@ -52,18 +49,18 @@
 
 /* Register access macros */
 #define ecc_readl(add, reg)                             \
-        __raw_readl(add + AT91_ECC_##reg)
+        __raw_readl(add + ATMEL_ECC_##reg)
 #define ecc_writel(add, reg, value)                     \
-        __raw_writel((value), add + AT91_ECC_##reg)
+        __raw_writel((value), add + ATMEL_ECC_##reg)
 
-#include <asm/arch/at91_ecc.h> /* AT91SAM9260/3 ECC registers */
+#include "atmel_nand_ecc.h"     /* Hardware ECC registers */
 
 /* oob layout for large page size
  * bad block info is on bytes 0 and 1
  * the bytes have to be consecutives to avoid
  * several NAND_CMD_RNDOUT during read
  */
-static struct nand_ecclayout at91_oobinfo_large = {
+static struct nand_ecclayout atmel_oobinfo_large = {
         .eccbytes = 4,
         .eccpos = {60, 61, 62, 63},
         .oobfree = {
@@ -76,7 +73,7 @@ static struct nand_ecclayout at91_oobinfo_large = {
  * the bytes have to be consecutives to avoid
  * several NAND_CMD_RNDOUT during read
  */
-static struct nand_ecclayout at91_oobinfo_small = {
+static struct nand_ecclayout atmel_oobinfo_small = {
         .eccbytes = 4,
         .eccpos = {0, 1, 2, 3},
         .oobfree = {
@@ -84,11 +81,11 @@ static struct nand_ecclayout at91_oobinfo_small = {
         },
 };
 
-struct at91_nand_host {
+struct atmel_nand_host {
         struct nand_chip        nand_chip;
         struct mtd_info         mtd;
         void __iomem            *io_base;
-        struct at91_nand_data   *board;
+        struct atmel_nand_data  *board;
         struct device           *dev;
         void __iomem            *ecc;
 };
@@ -96,34 +93,34 @@ struct at91_nand_host {
 /*
  * Enable NAND.
  */
-static void at91_nand_enable(struct at91_nand_host *host)
+static void atmel_nand_enable(struct atmel_nand_host *host)
 {
         if (host->board->enable_pin)
-                at91_set_gpio_value(host->board->enable_pin, 0);
+                gpio_set_value(host->board->enable_pin, 0);
 }
 
 /*
  * Disable NAND.
  */
-static void at91_nand_disable(struct at91_nand_host *host)
+static void atmel_nand_disable(struct atmel_nand_host *host)
 {
         if (host->board->enable_pin)
-                at91_set_gpio_value(host->board->enable_pin, 1);
+                gpio_set_value(host->board->enable_pin, 1);
 }
 
 /*
  * Hardware specific access to control-lines
  */
-static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
         struct nand_chip *nand_chip = mtd->priv;
-        struct at91_nand_host *host = nand_chip->priv;
+        struct atmel_nand_host *host = nand_chip->priv;
 
         if (ctrl & NAND_CTRL_CHANGE) {
                 if (ctrl & NAND_NCE)
-                        at91_nand_enable(host);
+                        atmel_nand_enable(host);
                 else
-                        at91_nand_disable(host);
+                        atmel_nand_disable(host);
         }
         if (cmd == NAND_CMD_NONE)
                 return;
@@ -137,18 +134,49 @@ static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 /*
  * Read the Device Ready pin.
  */
-static int at91_nand_device_ready(struct mtd_info *mtd)
+static int atmel_nand_device_ready(struct mtd_info *mtd)
 {
         struct nand_chip *nand_chip = mtd->priv;
-        struct at91_nand_host *host = nand_chip->priv;
+        struct atmel_nand_host *host = nand_chip->priv;
 
-        return at91_get_gpio_value(host->board->rdy_pin);
+        return gpio_get_value(host->board->rdy_pin);
+}
+
+/*
+ * Minimal-overhead PIO for data access.
+ */
+static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+        struct nand_chip        *nand_chip = mtd->priv;
+
+        __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
+}
+
+static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
+{
+        struct nand_chip        *nand_chip = mtd->priv;
+
+        __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
+}
+
+static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+        struct nand_chip        *nand_chip = mtd->priv;
+
+        __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
+}
+
+static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
+{
+        struct nand_chip        *nand_chip = mtd->priv;
+
+        __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
 }
 
 /*
  * write oob for small pages
  */
-static int at91_nand_write_oob_512(struct mtd_info *mtd,
+static int atmel_nand_write_oob_512(struct mtd_info *mtd,
                 struct nand_chip *chip, int page)
 {
         int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
@@ -176,7 +204,7 @@ static int at91_nand_write_oob_512(struct mtd_info *mtd,
 /*
  * read oob for small pages
  */
-static int at91_nand_read_oob_512(struct mtd_info *mtd,
+static int atmel_nand_read_oob_512(struct mtd_info *mtd,
                 struct nand_chip *chip, int page, int sndcmd)
 {
         if (sndcmd) {
@@ -196,11 +224,11 @@ static int at91_nand_read_oob_512(struct mtd_info *mtd,
  * dat:        raw data (unused)
  * ecc_code:   buffer for ECC
  */
-static int at91_nand_calculate(struct mtd_info *mtd,
+static int atmel_nand_calculate(struct mtd_info *mtd,
                 const u_char *dat, unsigned char *ecc_code)
 {
         struct nand_chip *nand_chip = mtd->priv;
-        struct at91_nand_host *host = nand_chip->priv;
+        struct atmel_nand_host *host = nand_chip->priv;
         uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
         unsigned int ecc_value;
 
@@ -211,7 +239,7 @@ static int at91_nand_calculate(struct mtd_info *mtd,
         ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
 
         /* get the last 2 ECC bytes */
-        ecc_value = ecc_readl(host->ecc, NPR) & AT91_ECC_NPARITY;
+        ecc_value = ecc_readl(host->ecc, NPR) & ATMEL_ECC_NPARITY;
 
         ecc_code[eccpos[2]] = ecc_value & 0xFF;
         ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
@@ -226,7 +254,7 @@ static int at91_nand_calculate(struct mtd_info *mtd,
  * chip:       nand chip info structure
  * buf:        buffer to store read data
  */
-static int at91_nand_read_page(struct mtd_info *mtd,
+static int atmel_nand_read_page(struct mtd_info *mtd,
                 struct nand_chip *chip, uint8_t *buf)
 {
         int eccsize = chip->ecc.size;
@@ -237,6 +265,19 @@ static int at91_nand_read_page(struct mtd_info *mtd,
         uint8_t *ecc_pos;
         int stat;
 
+        /*
+         * Errata: ALE is incorrectly wired up to the ECC controller
+         * on the AP7000, so it will include the address cycles in the
+         * ECC calculation.
+         *
+         * Workaround: Reset the parity registers before reading the
+         * actual data.
+         */
+        if (cpu_is_at32ap7000()) {
+                struct atmel_nand_host *host = chip->priv;
+                ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
+        }
+
         /* read the page */
         chip->read_buf(mtd, p, eccsize);
 
@@ -285,11 +326,11 @@ static int at91_nand_read_page(struct mtd_info *mtd,
  *
  * Detect and correct a 1 bit error for a page
  */
-static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
+static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
                 u_char *read_ecc, u_char *isnull)
 {
         struct nand_chip *nand_chip = mtd->priv;
-        struct at91_nand_host *host = nand_chip->priv;
+        struct atmel_nand_host *host = nand_chip->priv;
         unsigned int ecc_status;
         unsigned int ecc_word, ecc_bit;
 
@@ -297,43 +338,43 @@ static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
         ecc_status = ecc_readl(host->ecc, SR);
 
         /* if there's no error */
-        if (likely(!(ecc_status & AT91_ECC_RECERR)))
+        if (likely(!(ecc_status & ATMEL_ECC_RECERR)))
                 return 0;
 
         /* get error bit offset (4 bits) */
-        ecc_bit = ecc_readl(host->ecc, PR) & AT91_ECC_BITADDR;
+        ecc_bit = ecc_readl(host->ecc, PR) & ATMEL_ECC_BITADDR;
         /* get word address (12 bits) */
-        ecc_word = ecc_readl(host->ecc, PR) & AT91_ECC_WORDADDR;
+        ecc_word = ecc_readl(host->ecc, PR) & ATMEL_ECC_WORDADDR;
         ecc_word >>= 4;
 
         /* if there are multiple errors */
-        if (ecc_status & AT91_ECC_MULERR) {
+        if (ecc_status & ATMEL_ECC_MULERR) {
                 /* check if it is a freshly erased block
                  * (filled with 0xff) */
-                if ((ecc_bit == AT91_ECC_BITADDR)
-                                && (ecc_word == (AT91_ECC_WORDADDR >> 4))) {
+                if ((ecc_bit == ATMEL_ECC_BITADDR)
+                                && (ecc_word == (ATMEL_ECC_WORDADDR >> 4))) {
                         /* the block has just been erased, return OK */
                         return 0;
                 }
                 /* it doesn't seems to be a freshly
                  * erased block.
                  * We can't correct so many errors */
-                dev_dbg(host->dev, "at91_nand : multiple errors detected."
+                dev_dbg(host->dev, "atmel_nand : multiple errors detected."
                                 " Unable to correct.\n");
                 return -EIO;
         }
 
         /* if there's a single bit error : we can correct it */
-        if (ecc_status & AT91_ECC_ECCERR) {
+        if (ecc_status & ATMEL_ECC_ECCERR) {
                 /* there's nothing much to do here.
                  * the bit error is on the ECC itself.
                  */
-                dev_dbg(host->dev, "at91_nand : one bit error on ECC code."
+                dev_dbg(host->dev, "atmel_nand : one bit error on ECC code."
                                 " Nothing to correct\n");
                 return 0;
         }
 
-        dev_dbg(host->dev, "at91_nand : one bit error on data."
+        dev_dbg(host->dev, "atmel_nand : one bit error on data."
                         " (word offset in the page :"
                         " 0x%x bit offset : 0x%x)\n",
                         ecc_word, ecc_bit);
@@ -345,14 +386,21 @@ static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
                 /* 8 bits words */
                 dat[ecc_word] ^= (1 << ecc_bit);
         }
-        dev_dbg(host->dev, "at91_nand : error corrected\n");
+        dev_dbg(host->dev, "atmel_nand : error corrected\n");
         return 1;
 }
 
 /*
- * Enable HW ECC : unsused
+ * Enable HW ECC : unused on most chips
  */
-static void at91_nand_hwctl(struct mtd_info *mtd, int mode) { ; }
+static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
+{
+        if (cpu_is_at32ap7000()) {
+                struct nand_chip *nand_chip = mtd->priv;
+                struct atmel_nand_host *host = nand_chip->priv;
+                ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
+        }
+}
 
 #ifdef CONFIG_MTD_PARTITIONS
 static const char *part_probes[] = { "cmdlinepart", NULL };
@@ -361,9 +409,9 @@ static const char *part_probes[] = { "cmdlinepart", NULL };
 /*
  * Probe for the NAND device.
  */
-static int __init at91_nand_probe(struct platform_device *pdev)
+static int __init atmel_nand_probe(struct platform_device *pdev)
 {
-        struct at91_nand_host *host;
+        struct atmel_nand_host *host;
         struct mtd_info *mtd;
         struct nand_chip *nand_chip;
         struct resource *regs;
@@ -375,24 +423,24 @@ static int __init at91_nand_probe(struct platform_device *pdev)
         int num_partitions = 0;
 #endif
 
-        /* Allocate memory for the device structure (and zero it) */
-        host = kzalloc(sizeof(struct at91_nand_host), GFP_KERNEL);
-        if (!host) {
-                printk(KERN_ERR "at91_nand: failed to allocate device structure.\n");
-                return -ENOMEM;
-        }
-
         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
         if (!mem) {
-                printk(KERN_ERR "at91_nand: can't get I/O resource mem\n");
+                printk(KERN_ERR "atmel_nand: can't get I/O resource mem\n");
                 return -ENXIO;
         }
 
+        /* Allocate memory for the device structure (and zero it) */
+        host = kzalloc(sizeof(struct atmel_nand_host), GFP_KERNEL);
+        if (!host) {
+                printk(KERN_ERR "atmel_nand: failed to allocate device structure.\n");
+                return -ENOMEM;
+        }
+
         host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
         if (host->io_base == NULL) {
-                printk(KERN_ERR "at91_nand: ioremap failed\n");
-                kfree(host);
-                return -EIO;
+                printk(KERN_ERR "atmel_nand: ioremap failed\n");
+                res = -EIO;
+                goto err_nand_ioremap;
         }
 
         mtd = &host->mtd;
@@ -407,14 +455,14 @@ static int __init at91_nand_probe(struct platform_device *pdev)
         /* Set address of NAND IO lines */
         nand_chip->IO_ADDR_R = host->io_base;
         nand_chip->IO_ADDR_W = host->io_base;
-        nand_chip->cmd_ctrl = at91_nand_cmd_ctrl;
+        nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
 
         if (host->board->rdy_pin)
-                nand_chip->dev_ready = at91_nand_device_ready;
+                nand_chip->dev_ready = atmel_nand_device_ready;
 
         regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
         if (!regs && hard_ecc) {
-                printk(KERN_ERR "at91_nand: can't get I/O resource "
+                printk(KERN_ERR "atmel_nand: can't get I/O resource "
                                 "regs\nFalling back on software ECC\n");
         }
 
@@ -424,15 +472,15 @@ static int __init at91_nand_probe(struct platform_device *pdev)
         if (hard_ecc && regs) {
                 host->ecc = ioremap(regs->start, regs->end - regs->start + 1);
                 if (host->ecc == NULL) {
-                        printk(KERN_ERR "at91_nand: ioremap failed\n");
+                        printk(KERN_ERR "atmel_nand: ioremap failed\n");
                         res = -EIO;
                         goto err_ecc_ioremap;
                 }
                 nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME;
-                nand_chip->ecc.calculate = at91_nand_calculate;
-                nand_chip->ecc.correct = at91_nand_correct;
-                nand_chip->ecc.hwctl = at91_nand_hwctl;
-                nand_chip->ecc.read_page = at91_nand_read_page;
+                nand_chip->ecc.calculate = atmel_nand_calculate;
+                nand_chip->ecc.correct = atmel_nand_correct;
+                nand_chip->ecc.hwctl = atmel_nand_hwctl;
+                nand_chip->ecc.read_page = atmel_nand_read_page;
                 nand_chip->ecc.bytes = 4;
                 nand_chip->ecc.prepad = 0;
                 nand_chip->ecc.postpad = 0;
@@ -440,24 +488,30 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 
         nand_chip->chip_delay = 20;             /* 20us command delay time */
 
-        if (host->board->bus_width_16)          /* 16-bit bus width */
+        if (host->board->bus_width_16) {        /* 16-bit bus width */
                 nand_chip->options |= NAND_BUSWIDTH_16;
+                nand_chip->read_buf = atmel_read_buf16;
+                nand_chip->write_buf = atmel_write_buf16;
+        } else {
+                nand_chip->read_buf = atmel_read_buf;
+                nand_chip->write_buf = atmel_write_buf;
+        }
 
         platform_set_drvdata(pdev, host);
-        at91_nand_enable(host);
+        atmel_nand_enable(host);
 
         if (host->board->det_pin) {
-                if (at91_get_gpio_value(host->board->det_pin)) {
-                        printk ("No SmartMedia card inserted.\n");
+                if (gpio_get_value(host->board->det_pin)) {
+                        printk("No SmartMedia card inserted.\n");
                         res = ENXIO;
-                        goto out;
+                        goto err_no_card;
                 }
         }
 
         /* first scan to find the device and get the page size */
         if (nand_scan_ident(mtd, 1)) {
                 res = -ENXIO;
-                goto out;
+                goto err_scan_ident;
         }
 
         if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
@@ -467,22 +521,22 @@ static int __init at91_nand_probe(struct platform_device *pdev)
                 /* set ECC page size and oob layout */
                 switch (mtd->writesize) {
                 case 512:
-                        nand_chip->ecc.layout = &at91_oobinfo_small;
-                        nand_chip->ecc.read_oob = at91_nand_read_oob_512;
-                        nand_chip->ecc.write_oob = at91_nand_write_oob_512;
-                        ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_528);
+                        nand_chip->ecc.layout = &atmel_oobinfo_small;
+                        nand_chip->ecc.read_oob = atmel_nand_read_oob_512;
+                        nand_chip->ecc.write_oob = atmel_nand_write_oob_512;
+                        ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
                         break;
                 case 1024:
-                        nand_chip->ecc.layout = &at91_oobinfo_large;
-                        ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_1056);
+                        nand_chip->ecc.layout = &atmel_oobinfo_large;
+                        ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
                         break;
                 case 2048:
-                        nand_chip->ecc.layout = &at91_oobinfo_large;
-                        ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_2112);
+                        nand_chip->ecc.layout = &atmel_oobinfo_large;
+                        ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
                         break;
                 case 4096:
-                        nand_chip->ecc.layout = &at91_oobinfo_large;
-                        ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_4224);
+                        nand_chip->ecc.layout = &atmel_oobinfo_large;
+                        ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
                         break;
                 default:
                         /* page size not handled by HW ECC */
@@ -502,12 +556,12 @@ static int __init at91_nand_probe(struct platform_device *pdev)
         /* second phase scan */
         if (nand_scan_tail(mtd)) {
                 res = -ENXIO;
-                goto out;
+                goto err_scan_tail;
         }
 
 #ifdef CONFIG_MTD_PARTITIONS
 #ifdef CONFIG_MTD_CMDLINE_PARTS
-        mtd->name = "at91_nand";
+        mtd->name = "atmel_nand";
         num_partitions = parse_mtd_partitions(mtd, part_probes,
                                               &partitions, 0);
 #endif
@@ -516,9 +570,9 @@ static int __init at91_nand_probe(struct platform_device *pdev)
                                                          &num_partitions);
 
         if ((!partitions) || (num_partitions == 0)) {
-                printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
+                printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n");
                 res = ENXIO;
-                goto release;
+                goto err_no_partitions;
         }
 
         res = add_mtd_partitions(mtd, partitions, num_partitions);
@@ -530,17 +584,19 @@ static int __init at91_nand_probe(struct platform_device *pdev)
                 return res;
 
 #ifdef CONFIG_MTD_PARTITIONS
-release:
+err_no_partitions:
 #endif
         nand_release(mtd);
-
-out:
-        iounmap(host->ecc);
-
-err_ecc_ioremap:
-        at91_nand_disable(host);
+err_scan_tail:
+err_scan_ident:
+err_no_card:
+        atmel_nand_disable(host);
         platform_set_drvdata(pdev, NULL);
+        if (host->ecc)
+                iounmap(host->ecc);
+err_ecc_ioremap:
         iounmap(host->io_base);
+err_nand_ioremap:
         kfree(host);
         return res;
 }
@@ -548,47 +604,47 @@ err_ecc_ioremap:
 /*
  * Remove a NAND device.
  */
-static int __devexit at91_nand_remove(struct platform_device *pdev)
+static int __exit atmel_nand_remove(struct platform_device *pdev)
 {
-        struct at91_nand_host *host = platform_get_drvdata(pdev);
+        struct atmel_nand_host *host = platform_get_drvdata(pdev);
         struct mtd_info *mtd = &host->mtd;
 
         nand_release(mtd);
 
-        at91_nand_disable(host);
+        atmel_nand_disable(host);
 
+        if (host->ecc)
+                iounmap(host->ecc);
         iounmap(host->io_base);
-        iounmap(host->ecc);
         kfree(host);
 
         return 0;
 }
 
-static struct platform_driver at91_nand_driver = {
-        .probe          = at91_nand_probe,
-        .remove         = at91_nand_remove,
+static struct platform_driver atmel_nand_driver = {
+        .remove         = __exit_p(atmel_nand_remove),
         .driver         = {
-                .name   = "at91_nand",
+                .name   = "atmel_nand",
                 .owner  = THIS_MODULE,
         },
 };
 
-static int __init at91_nand_init(void)
+static int __init atmel_nand_init(void)
 {
-        return platform_driver_register(&at91_nand_driver);
+        return platform_driver_probe(&atmel_nand_driver, atmel_nand_probe);
 }
 
 
-static void __exit at91_nand_exit(void)
+static void __exit atmel_nand_exit(void)
 {
-        platform_driver_unregister(&at91_nand_driver);
+        platform_driver_unregister(&atmel_nand_driver);
 }
 
 
-module_init(at91_nand_init);
-module_exit(at91_nand_exit);
+module_init(atmel_nand_init);
+module_exit(atmel_nand_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Rick Bronson");
-MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200 / AT91SAM9");
-MODULE_ALIAS("platform:at91_nand");
+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91 / AVR32");
+MODULE_ALIAS("platform:atmel_nand");
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
new file mode 100644
index 000000000000..1ee7f993db1c
--- /dev/null
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -0,0 +1,36 @@
+/*
+ * Error Corrected Code Controller (ECC) - System peripherals regsters.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef ATMEL_NAND_ECC_H
+#define ATMEL_NAND_ECC_H
+
+#define ATMEL_ECC_CR            0x00                    /* Control register */
+#define         ATMEL_ECC_RST           (1 << 0)                /* Reset parity */
+
+#define ATMEL_ECC_MR            0x04                    /* Mode register */
+#define         ATMEL_ECC_PAGESIZE      (3 << 0)                /* Page Size */
+#define                 ATMEL_ECC_PAGESIZE_528          (0)
+#define                 ATMEL_ECC_PAGESIZE_1056         (1)
+#define                 ATMEL_ECC_PAGESIZE_2112         (2)
+#define                 ATMEL_ECC_PAGESIZE_4224         (3)
+
+#define ATMEL_ECC_SR            0x08                    /* Status register */
+#define         ATMEL_ECC_RECERR                (1 << 0)                /* Recoverable Error */
+#define         ATMEL_ECC_ECCERR                (1 << 1)                /* ECC Single Bit Error */
+#define         ATMEL_ECC_MULERR                (1 << 2)                /* Multiple Errors */
+
+#define ATMEL_ECC_PR            0x0c                    /* Parity register */
+#define         ATMEL_ECC_BITADDR       (0xf << 0)              /* Bit Error Address */
+#define         ATMEL_ECC_WORDADDR      (0xfff << 4)            /* Word Error Address */
+
+#define ATMEL_ECC_NPR           0x10                    /* NParity register */
+#define         ATMEL_ECC_NPARITY       (0xffff << 0)           /* NParity */
+
+#endif
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 09e421a96893..761946ea45b1 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2004 Embedded Edge, LLC
  *
- * $Id: au1550nd.c,v 1.13 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -604,8 +602,6 @@ module_init(au1xxx_nand_init);
  */
 static void __exit au1550_cleanup(void)
 {
-        struct nand_chip *this = (struct nand_chip *)&au1550_mtd[1];
-
         /* Release resources, unregister device */
         nand_release(au1550_mtd);
 
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index dd38011ee0b7..553dd7e9b41c 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -6,8 +6,6 @@
  *  Derived from drivers/mtd/spia.c
  *       Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  *
- * $Id: autcpu12.c,v 1.23 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index da6ceaa80ba1..95345d051579 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -626,10 +626,12 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 {
         struct mtd_info *mtd;
         struct cafe_priv *cafe;
-        struct mtd_partition *parts;
         uint32_t ctrl;
-        int nr_parts;
         int err = 0;
+#ifdef CONFIG_MTD_PARTITIONS
+        struct mtd_partition *parts;
+        int nr_parts;
+#endif
 
         /* Very old versions shared the same PCI ident for all three
            functions on the chip. Verify the class too... */
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 0e72153b3297..765d4f0f7c86 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -15,8 +15,6 @@
  * converted to the generic Reed-Solomon library by Thomas Gleixner <tglx@linutronix.de>
  *
  * Interface to generic NAND code for M-Systems DiskOnChip devices
- *
- * $Id: diskonchip.c,v 1.55 2005/11/07 11:14:30 gleixner Exp $
  */
 
 #include <linux/kernel.h>
@@ -54,8 +52,6 @@ static unsigned long __initdata doc_locations[] = {
         0xe0000, 0xe2000, 0xe4000, 0xe6000,
         0xe8000, 0xea000, 0xec000, 0xee000,
 #endif /*  CONFIG_MTD_DOCPROBE_HIGH */
-#elif defined(__PPC__)
-        0xe4000000,
 #else
 #warning Unknown architecture for DiskOnChip. No default probe locations defined
 #endif
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index ba67bbec20d3..387e4352903e 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c
@@ -6,8 +6,6 @@
  *  Derived from drivers/mtd/nand/autcpu12.c
  *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: edb7312.c,v 1.12 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/excite_nandflash.c b/drivers/mtd/nand/excite_nandflash.c
index bed87290decc..ced14b5294d5 100644
--- a/drivers/mtd/nand/excite_nandflash.c
+++ b/drivers/mtd/nand/excite_nandflash.c
@@ -209,7 +209,7 @@ static int __init excite_nand_probe(struct device *dev)
         if (likely(!scan_res)) {
                 DEBUG(MTD_DEBUG_LEVEL2, "%s: register partitions\n", module_id);
                 add_mtd_partitions(&drvdata->board_mtd, partition_info,
-                                   sizeof partition_info / sizeof partition_info[0]);
+                                   ARRAY_SIZE(partition_info));
         } else {
                 iounmap(drvdata->regs);
                 kfree(drvdata);
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 4b69aacdf5ca..9dff51351f4f 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -89,7 +89,6 @@ static struct nand_ecclayout fsl_elbc_oob_sp_eccm0 = {
         .eccbytes = 3,
         .eccpos = {6, 7, 8},
         .oobfree = { {0, 5}, {9, 7} },
-        .oobavail = 12,
 };
 
 /* Small Page FLASH with FMR[ECCM] = 1 */
@@ -97,7 +96,6 @@ static struct nand_ecclayout fsl_elbc_oob_sp_eccm1 = {
         .eccbytes = 3,
         .eccpos = {8, 9, 10},
         .oobfree = { {0, 5}, {6, 2}, {11, 5} },
-        .oobavail = 12,
 };
 
 /* Large Page FLASH with FMR[ECCM] = 0 */
@@ -105,7 +103,6 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm0 = {
         .eccbytes = 12,
         .eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
         .oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
-        .oobavail = 48,
 };
 
 /* Large Page FLASH with FMR[ECCM] = 1 */
@@ -113,7 +110,48 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = {
         .eccbytes = 12,
         .eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
         .oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
-        .oobavail = 48,
+};
+
+/*
+ * fsl_elbc_oob_lp_eccm* specify that LP NAND's OOB free area starts at offset
+ * 1, so we have to adjust bad block pattern. This pattern should be used for
+ * x8 chips only. So far hardware does not support x16 chips anyway.
+ */
+static u8 scan_ff_pattern[] = { 0xff, };
+
+static struct nand_bbt_descr largepage_memorybased = {
+        .options = 0,
+        .offs = 0,
+        .len = 1,
+        .pattern = scan_ff_pattern,
+};
+
+/*
+ * ELBC may use HW ECC, so that OOB offsets, that NAND core uses for bbt,
+ * interfere with ECC positions, that's why we implement our own descriptors.
+ * OOB {11, 5}, works for both SP and LP chips, with ECCM = 1 and ECCM = 0.
+ */
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+        .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+                   NAND_BBT_2BIT | NAND_BBT_VERSION,
+        .offs = 11,
+        .len = 4,
+        .veroffs = 15,
+        .maxblocks = 4,
+        .pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+        .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+                   NAND_BBT_2BIT | NAND_BBT_VERSION,
+        .offs = 11,
+        .len = 4,
+        .veroffs = 15,
+        .maxblocks = 4,
+        .pattern = mirror_pattern,
 };
 
 /*=================================*/
@@ -687,8 +725,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
                         chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
                                            &fsl_elbc_oob_lp_eccm1 :
                                            &fsl_elbc_oob_lp_eccm0;
-                        mtd->ecclayout = chip->ecc.layout;
-                        mtd->oobavail = chip->ecc.layout->oobavail;
+                        chip->badblock_pattern = &largepage_memorybased;
                 }
         } else {
                 dev_err(ctrl->dev,
@@ -752,8 +789,12 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
         chip->cmdfunc = fsl_elbc_cmdfunc;
         chip->waitfunc = fsl_elbc_wait;
 
+        chip->bbt_td = &bbt_main_descr;
+        chip->bbt_md = &bbt_mirror_descr;
+
         /* set up nand options */
-        chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+        chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
+                        NAND_USE_FLASH_BBT;
 
         chip->controller = &ctrl->controller;
         chip->priv = priv;
@@ -795,8 +836,8 @@ static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
         return 0;
 }
 
-static int fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
-                               struct device_node *node)
+static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
+                                         struct device_node *node)
 {
         struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
         struct fsl_elbc_mtd *priv;
@@ -917,7 +958,7 @@ static int __devinit fsl_elbc_ctrl_init(struct fsl_elbc_ctrl *ctrl)
         return 0;
 }
 
-static int __devexit fsl_elbc_ctrl_remove(struct of_device *ofdev)
+static int fsl_elbc_ctrl_remove(struct of_device *ofdev)
 {
         struct fsl_elbc_ctrl *ctrl = dev_get_drvdata(&ofdev->dev);
         int i;
@@ -1041,7 +1082,7 @@ static struct of_platform_driver fsl_elbc_ctrl_driver = {
         },
         .match_table = fsl_elbc_match,
         .probe = fsl_elbc_ctrl_probe,
-        .remove = __devexit_p(fsl_elbc_ctrl_remove),
+        .remove = fsl_elbc_ctrl_remove,
 };
 
 static int __init fsl_elbc_init(void)
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index 2d585d2d090c..9e59de501c2e 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -7,8 +7,6 @@
  *       Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
  *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: h1910.c,v 1.6 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ba1bdf787323..d1129bae6c27 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -798,6 +798,87 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 }
 
 /**
+ * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function
+ * @mtd:        mtd info structure
+ * @chip:       nand chip info structure
+ * @dataofs     offset of requested data within the page
+ * @readlen     data length
+ * @buf:        buffer to store read data
+ */
+static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
+{
+        int start_step, end_step, num_steps;
+        uint32_t *eccpos = chip->ecc.layout->eccpos;
+        uint8_t *p;
+        int data_col_addr, i, gaps = 0;
+        int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
+        int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
+
+        /* Column address wihin the page aligned to ECC size (256bytes). */
+        start_step = data_offs / chip->ecc.size;
+        end_step = (data_offs + readlen - 1) / chip->ecc.size;
+        num_steps = end_step - start_step + 1;
+
+        /* Data size aligned to ECC ecc.size*/
+        datafrag_len = num_steps * chip->ecc.size;
+        eccfrag_len = num_steps * chip->ecc.bytes;
+
+        data_col_addr = start_step * chip->ecc.size;
+        /* If we read not a page aligned data */
+        if (data_col_addr != 0)
+                chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1);
+
+        p = bufpoi + data_col_addr;
+        chip->read_buf(mtd, p, datafrag_len);
+
+        /* Calculate  ECC */
+        for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size)
+                chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]);
+
+        /* The performance is faster if to position offsets
+           according to ecc.pos. Let make sure here that
+           there are no gaps in ecc positions */
+        for (i = 0; i < eccfrag_len - 1; i++) {
+                if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
+                        eccpos[i + start_step * chip->ecc.bytes + 1]) {
+                        gaps = 1;
+                        break;
+                }
+        }
+        if (gaps) {
+                chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
+                chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+        } else {
+                /* send the command to read the particular ecc bytes */
+                /* take care about buswidth alignment in read_buf */
+                aligned_pos = eccpos[start_step * chip->ecc.bytes] & ~(busw - 1);
+                aligned_len = eccfrag_len;
+                if (eccpos[start_step * chip->ecc.bytes] & (busw - 1))
+                        aligned_len++;
+                if (eccpos[(start_step + num_steps) * chip->ecc.bytes] & (busw - 1))
+                        aligned_len++;
+
+                chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize + aligned_pos, -1);
+                chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len);
+        }
+
+        for (i = 0; i < eccfrag_len; i++)
+                chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + start_step * chip->ecc.bytes]];
+
+        p = bufpoi + data_col_addr;
+        for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) {
+                int stat;
+
+                stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
+                if (stat == -1)
+                        mtd->ecc_stats.failed++;
+                else
+                        mtd->ecc_stats.corrected += stat;
+        }
+        return 0;
+}
+
+/**
  * nand_read_page_hwecc - [REPLACABLE] hardware ecc based page read function
  * @mtd:        mtd info structure
  * @chip:       nand chip info structure
@@ -994,6 +1075,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
                         /* Now read the page into the buffer */
                         if (unlikely(ops->mode == MTD_OOB_RAW))
                                 ret = chip->ecc.read_page_raw(mtd, chip, bufpoi);
+                        else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
+                                ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi);
                         else
                                 ret = chip->ecc.read_page(mtd, chip, bufpoi);
                         if (ret < 0)
@@ -1001,7 +1084,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 
                         /* Transfer not aligned data */
                         if (!aligned) {
-                                chip->pagebuf = realpage;
+                                if (!NAND_SUBPAGE_READ(chip) && !oob)
+                                        chip->pagebuf = realpage;
                                 memcpy(buf, chip->buffers->databuf + col, bytes);
                         }
 
@@ -2521,6 +2605,7 @@ int nand_scan_tail(struct mtd_info *mtd)
                 chip->ecc.calculate = nand_calculate_ecc;
                 chip->ecc.correct = nand_correct_data;
                 chip->ecc.read_page = nand_read_page_swecc;
+                chip->ecc.read_subpage = nand_read_subpage;
                 chip->ecc.write_page = nand_write_page_swecc;
                 chip->ecc.read_oob = nand_read_oob_std;
                 chip->ecc.write_oob = nand_write_oob_std;
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 5e121ceaa598..0b1c48595f12 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -6,8 +6,6 @@
  *
  *  Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
  *
- * $Id: nand_bbt.c,v 1.36 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 9003a135e050..918a806a8471 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -9,8 +9,6 @@
  *
  * Copyright (C) 2006 Thomas Gleixner <tglx@linutronix.de>
  *
- * $Id: nand_ecc.c,v 1.15 2005/11/07 11:14:30 gleixner Exp $
- *
  * This file is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 or (at your option) any
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index a3e3ab0185d5..69ee2c90eb0b 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de)
  *
- * $Id: nand_ids.c,v 1.16 2005/11/07 11:14:31 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index bb885d1fcab5..ecd70e2504f6 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -21,8 +21,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
- *
- * $Id: nandsim.c,v 1.8 2005/03/19 15:33:56 dedekind Exp $
  */
 
 #include <linux/init.h>
@@ -39,6 +37,7 @@
 #include <linux/delay.h>
 #include <linux/list.h>
 #include <linux/random.h>
+#include <asm/div64.h>
 
 /* Default simulator parameters values */
 #if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE)  || \
@@ -298,11 +297,11 @@ struct nandsim {
 
         /* NAND flash "geometry" */
         struct nandsin_geometry {
-                uint32_t totsz;     /* total flash size, bytes */
+                uint64_t totsz;     /* total flash size, bytes */
                 uint32_t secsz;     /* flash sector (erase block) size, bytes */
                 uint pgsz;          /* NAND flash page size, bytes */
                 uint oobsz;         /* page OOB area size, bytes */
-                uint32_t totszoob;  /* total flash size including OOB, bytes */
+                uint64_t totszoob;  /* total flash size including OOB, bytes */
                 uint pgszoob;       /* page size including OOB , bytes*/
                 uint secszoob;      /* sector size including OOB, bytes */
                 uint pgnum;         /* total number of pages */
@@ -459,6 +458,12 @@ static char *get_partition_name(int i)
         return kstrdup(buf, GFP_KERNEL);
 }
 
+static u_int64_t divide(u_int64_t n, u_int32_t d)
+{
+        do_div(n, d);
+        return n;
+}
+
 /*
  * Initialize the nandsim structure.
  *
@@ -469,8 +474,8 @@ static int init_nandsim(struct mtd_info *mtd)
         struct nand_chip *chip = (struct nand_chip *)mtd->priv;
         struct nandsim   *ns   = (struct nandsim *)(chip->priv);
         int i, ret = 0;
-        u_int32_t remains;
-        u_int32_t next_offset;
+        u_int64_t remains;
+        u_int64_t next_offset;
 
         if (NS_IS_INITIALIZED(ns)) {
                 NS_ERR("init_nandsim: nandsim is already initialized\n");
@@ -487,8 +492,8 @@ static int init_nandsim(struct mtd_info *mtd)
         ns->geom.oobsz    = mtd->oobsize;
         ns->geom.secsz    = mtd->erasesize;
         ns->geom.pgszoob  = ns->geom.pgsz + ns->geom.oobsz;
-        ns->geom.pgnum    = ns->geom.totsz / ns->geom.pgsz;
-        ns->geom.totszoob = ns->geom.totsz + ns->geom.pgnum * ns->geom.oobsz;
+        ns->geom.pgnum    = divide(ns->geom.totsz, ns->geom.pgsz);
+        ns->geom.totszoob = ns->geom.totsz + (uint64_t)ns->geom.pgnum * ns->geom.oobsz;
         ns->geom.secshift = ffs(ns->geom.secsz) - 1;
         ns->geom.pgshift  = chip->page_shift;
         ns->geom.oobshift = ffs(ns->geom.oobsz) - 1;
@@ -511,7 +516,7 @@ static int init_nandsim(struct mtd_info *mtd)
         }
 
         if (ns->options & OPT_SMALLPAGE) {
-                if (ns->geom.totsz < (32 << 20)) {
+                if (ns->geom.totsz <= (32 << 20)) {
                         ns->geom.pgaddrbytes  = 3;
                         ns->geom.secaddrbytes = 2;
                 } else {
@@ -537,15 +542,16 @@ static int init_nandsim(struct mtd_info *mtd)
         remains = ns->geom.totsz;
         next_offset = 0;
         for (i = 0; i < parts_num; ++i) {
-                unsigned long part = parts[i];
-                if (!part || part > remains / ns->geom.secsz) {
+                u_int64_t part_sz = (u_int64_t)parts[i] * ns->geom.secsz;
+
+                if (!part_sz || part_sz > remains) {
                         NS_ERR("bad partition size.\n");
                         ret = -EINVAL;
                         goto error;
                 }
                 ns->partitions[i].name   = get_partition_name(i);
                 ns->partitions[i].offset = next_offset;
-                ns->partitions[i].size   = part * ns->geom.secsz;
+                ns->partitions[i].size   = part_sz;
                 next_offset += ns->partitions[i].size;
                 remains -= ns->partitions[i].size;
         }
@@ -573,7 +579,7 @@ static int init_nandsim(struct mtd_info *mtd)
         if (ns->busw == 16)
                 NS_WARN("16-bit flashes support wasn't tested\n");
 
-        printk("flash size: %u MiB\n",          ns->geom.totsz >> 20);
+        printk("flash size: %llu MiB\n",        ns->geom.totsz >> 20);
         printk("page size: %u bytes\n",         ns->geom.pgsz);
         printk("OOB area size: %u bytes\n",     ns->geom.oobsz);
         printk("sector size: %u KiB\n",         ns->geom.secsz >> 10);
@@ -583,7 +589,7 @@ static int init_nandsim(struct mtd_info *mtd)
         printk("bits in sector size: %u\n",     ns->geom.secshift);
         printk("bits in page size: %u\n",       ns->geom.pgshift);
         printk("bits in OOB size: %u\n",        ns->geom.oobshift);
-        printk("flash size with OOB: %u KiB\n", ns->geom.totszoob >> 10);
+        printk("flash size with OOB: %llu KiB\n", ns->geom.totszoob >> 10);
         printk("page address bytes: %u\n",      ns->geom.pgaddrbytes);
         printk("sector address bytes: %u\n",    ns->geom.secaddrbytes);
         printk("options: %#x\n",                ns->options);
@@ -825,7 +831,7 @@ static int setup_wear_reporting(struct mtd_info *mtd)
 
         if (!rptwear)
                 return 0;
-        wear_eb_count = mtd->size / mtd->erasesize;
+        wear_eb_count = divide(mtd->size, mtd->erasesize);
         mem = wear_eb_count * sizeof(unsigned long);
         if (mem / sizeof(unsigned long) != wear_eb_count) {
                 NS_ERR("Too many erase blocks for wear reporting\n");
@@ -2013,7 +2019,7 @@ static int __init ns_init_module(void)
         }
 
         if (overridesize) {
-                u_int32_t new_size = nsmtd->erasesize << overridesize;
+                u_int64_t new_size = (u_int64_t)nsmtd->erasesize << overridesize;
                 if (new_size >> overridesize != nsmtd->erasesize) {
                         NS_ERR("overridesize is too big\n");
                         goto err_exit;
@@ -2021,7 +2027,8 @@ static int __init ns_init_module(void)
                 /* N.B. This relies on nand_scan not doing anything with the size before we change it */
                 nsmtd->size = new_size;
                 chip->chipsize = new_size;
-                chip->chip_shift = ffs(new_size) - 1;
+                chip->chip_shift = ffs(nsmtd->erasesize) + overridesize - 1;
+                chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
         }
 
         if ((retval = setup_wear_reporting(nsmtd)) != 0)
diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c
index 082073acf20f..cc8658431851 100644
--- a/drivers/mtd/nand/ppchameleonevb.c
+++ b/drivers/mtd/nand/ppchameleonevb.c
@@ -6,8 +6,6 @@
  *  Derived from drivers/mtd/nand/edb7312.c
  *
  *
- * $Id: ppchameleonevb.c,v 1.7 2005/11/07 11:14:31 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
index 26f88215bc47..a033c4cd8e16 100644
--- a/drivers/mtd/nand/rtc_from4.c
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -6,8 +6,6 @@
  *  Derived from drivers/mtd/nand/spia.c
  *       Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  *
- * $Id: rtc_from4.c,v 1.10 2005/11/07 11:14:31 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index b34a460ab679..556139ed1fdf 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -1,26 +1,10 @@
 /* linux/drivers/mtd/nand/s3c2410.c
  *
- * Copyright (c) 2004,2005 Simtec Electronics
- *      http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright © 2004-2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
  *
- * Samsung S3C2410/S3C240 NAND driver
- *
- * Changelog:
- *      21-Sep-2004  BJD  Initial version
- *      23-Sep-2004  BJD  Multiple device support
- *      28-Sep-2004  BJD  Fixed ECC placement for Hardware mode
- *      12-Oct-2004  BJD  Fixed errors in use of platform data
- *      18-Feb-2005  BJD  Fix sparse errors
- *      14-Mar-2005  BJD  Applied tglx's code reduction patch
- *      02-May-2005  BJD  Fixed s3c2440 support
- *      02-May-2005  BJD  Reduced hwcontrol decode
- *      20-Jun-2005  BJD  Updated s3c2440 support, fixed timing bug
- *      08-Jul-2005  BJD  Fix OOPS when no platform data supplied
- *      20-Oct-2005  BJD  Fix timing calculation bug
- *      14-Jan-2006  BJD  Allow clock to be stopped when idle
- *
- * $Id: s3c2410.c,v 1.23 2006/04/01 18:06:29 bjd Exp $
+ * Samsung S3C2410/S3C2440/S3C2412 NAND driver
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -52,6 +36,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
+#include <linux/cpufreq.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -120,8 +105,13 @@ struct s3c2410_nand_info {
         int                             sel_bit;
         int                             mtd_count;
         unsigned long                   save_sel;
+        unsigned long                   clk_rate;
 
         enum s3c_cpu_type               cpu_type;
+
+#ifdef CONFIG_CPU_FREQ
+        struct notifier_block   freq_transition;
+#endif
 };
 
 /* conversion functions */
@@ -179,17 +169,18 @@ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max)
 
 /* controller setup */
 
-static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
-                               struct platform_device *pdev)
+static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
 {
-        struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
-        unsigned long clkrate = clk_get_rate(info->clk);
+        struct s3c2410_platform_nand *plat = info->platform;
         int tacls_max = (info->cpu_type == TYPE_S3C2412) ? 8 : 4;
         int tacls, twrph0, twrph1;
-        unsigned long cfg = 0;
+        unsigned long clkrate = clk_get_rate(info->clk);
+        unsigned long set, cfg, mask;
+        unsigned long flags;
 
         /* calculate the timing information for the controller */
 
+        info->clk_rate = clkrate;
         clkrate /= 1000;        /* turn clock into kHz for ease of use */
 
         if (plat != NULL) {
@@ -211,28 +202,69 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
         dev_info(info->device, "Tacls=%d, %dns Twrph0=%d %dns, Twrph1=%d %dns\n",
                tacls, to_ns(tacls, clkrate), twrph0, to_ns(twrph0, clkrate), twrph1, to_ns(twrph1, clkrate));
 
+        switch (info->cpu_type) {
+        case TYPE_S3C2410:
+                mask = (S3C2410_NFCONF_TACLS(3) |
+                        S3C2410_NFCONF_TWRPH0(7) |
+                        S3C2410_NFCONF_TWRPH1(7));
+                set = S3C2410_NFCONF_EN;
+                set |= S3C2410_NFCONF_TACLS(tacls - 1);
+                set |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
+                set |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
+                break;
+
+        case TYPE_S3C2440:
+        case TYPE_S3C2412:
+                mask = (S3C2410_NFCONF_TACLS(tacls_max - 1) |
+                        S3C2410_NFCONF_TWRPH0(7) |
+                        S3C2410_NFCONF_TWRPH1(7));
+
+                set = S3C2440_NFCONF_TACLS(tacls - 1);
+                set |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
+                set |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
+                break;
+
+        default:
+                /* keep compiler happy */
+                mask = 0;
+                set = 0;
+                BUG();
+        }
+
+        dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
+
+        local_irq_save(flags);
+
+        cfg = readl(info->regs + S3C2410_NFCONF);
+        cfg &= ~mask;
+        cfg |= set;
+        writel(cfg, info->regs + S3C2410_NFCONF);
+
+        local_irq_restore(flags);
+
+        return 0;
+}
+
+static int s3c2410_nand_inithw(struct s3c2410_nand_info *info)
+{
+        int ret;
+
+        ret = s3c2410_nand_setrate(info);
+        if (ret < 0)
+                return ret;
+
         switch (info->cpu_type) {
         case TYPE_S3C2410:
-                cfg = S3C2410_NFCONF_EN;
-                cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
-                cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
-                cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
+        default:
                 break;
 
         case TYPE_S3C2440:
         case TYPE_S3C2412:
-                cfg = S3C2440_NFCONF_TACLS(tacls - 1);
-                cfg |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
-                cfg |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
-
                 /* enable the controller and de-assert nFCE */
 
                 writel(S3C2440_NFCONT_ENABLE, info->regs + S3C2440_NFCONT);
         }
 
-        dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
-
-        writel(cfg, info->regs + S3C2410_NFCONF);
         return 0;
 }
 
@@ -513,6 +545,52 @@ static void s3c2440_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int
         writesl(info->regs + S3C2440_NFDATA, buf, len / 4);
 }
 
+/* cpufreq driver support */
+
+#ifdef CONFIG_CPU_FREQ
+
+static int s3c2410_nand_cpufreq_transition(struct notifier_block *nb,
+                                          unsigned long val, void *data)
+{
+        struct s3c2410_nand_info *info;
+        unsigned long newclk;
+
+        info = container_of(nb, struct s3c2410_nand_info, freq_transition);
+        newclk = clk_get_rate(info->clk);
+
+        if ((val == CPUFREQ_POSTCHANGE && newclk < info->clk_rate) ||
+            (val == CPUFREQ_PRECHANGE && newclk > info->clk_rate)) {
+                s3c2410_nand_setrate(info);
+        }
+
+        return 0;
+}
+
+static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
+{
+        info->freq_transition.notifier_call = s3c2410_nand_cpufreq_transition;
+
+        return cpufreq_register_notifier(&info->freq_transition,
+                                         CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+{
+        cpufreq_unregister_notifier(&info->freq_transition,
+                                    CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
+{
+        return 0;
+}
+
+static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+{
+}
+#endif
+
 /* device management functions */
 
 static int s3c2410_nand_remove(struct platform_device *pdev)
@@ -524,9 +602,10 @@ static int s3c2410_nand_remove(struct platform_device *pdev)
         if (info == NULL)
                 return 0;
 
-        /* first thing we need to do is release all our mtds
-         * and their partitions, then go through freeing the
-         * resources used
+        s3c2410_nand_cpufreq_deregister(info);
+
+        /* Release all our mtds  and their partitions, then go through
+         * freeing the resources used
          */
 
         if (info->mtds != NULL) {
@@ -691,7 +770,8 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
 {
         struct nand_chip *chip = &nmtd->chip;
 
-        printk("%s: chip %p: %d\n", __func__, chip, chip->page_shift);
+        dev_dbg(info->device, "chip %p => page shift %d\n",
+                chip, chip->page_shift);
 
         if (hardware_ecc) {
                 /* change the behaviour depending on wether we are using
@@ -784,7 +864,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
 
         /* initialise the hardware */
 
-        err = s3c2410_nand_inithw(info, pdev);
+        err = s3c2410_nand_inithw(info);
         if (err != 0)
                 goto exit_error;
 
@@ -827,6 +907,12 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
                         sets++;
         }
 
+        err = s3c2410_nand_cpufreq_register(info);
+        if (err < 0) {
+                dev_err(&pdev->dev, "failed to init cpufreq support\n");
+                goto exit_error;
+        }
+
         if (allow_clk_stop(info)) {
                 dev_info(&pdev->dev, "clock idle support enabled\n");
                 clk_disable(info->clk);
@@ -874,7 +960,7 @@ static int s3c24xx_nand_resume(struct platform_device *dev)
 
         if (info) {
                 clk_enable(info->clk);
-                s3c2410_nand_inithw(info, dev);
+                s3c2410_nand_inithw(info);
 
                 /* Restore the state of the nFCE line. */
 
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 033f8800b1e6..6dba2fb66ae5 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2004 Richard Purdie
  *
- *  $Id: sharpsl.c,v 1.7 2005/11/07 11:14:31 gleixner Exp $
- *
  *  Based on Sharp's NAND driver sharp_sl.c
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/mtd/nand/spia.c b/drivers/mtd/nand/spia.c
index 1f6d429b1583..0cc6d0acb8fe 100644
--- a/drivers/mtd/nand/spia.c
+++ b/drivers/mtd/nand/spia.c
@@ -8,8 +8,6 @@
  *                      to controllines (due to change in nand.c)
  *                      page_cache added
  *
- * $Id: spia.c,v 1.25 2005/11/07 11:14:31 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/toto.c b/drivers/mtd/nand/toto.c
index f9e2d4a0ab8c..bbf492e6830d 100644
--- a/drivers/mtd/nand/toto.c
+++ b/drivers/mtd/nand/toto.c
@@ -14,8 +14,6 @@
  *  Overview:
  *   This is a device driver for the NAND flash device found on the
  *   TI fido board. It supports 32MiB and 64MiB cards
- *
- * $Id: toto.c,v 1.5 2005/11/07 11:14:31 gleixner Exp $
  */
 
 #include <linux/slab.h>
diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c
index f40081069ab2..807a72752eeb 100644
--- a/drivers/mtd/nand/ts7250.c
+++ b/drivers/mtd/nand/ts7250.c
@@ -9,8 +9,6 @@
  * Derived from drivers/mtd/nand/autcpu12.c
  *   Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: ts7250.c,v 1.4 2004/12/30 22:02:07 joff Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c
index 0c9ce19ea27a..320b929abe79 100644
--- a/drivers/mtd/nftlcore.c
+++ b/drivers/mtd/nftlcore.c
@@ -1,7 +1,6 @@
 /* Linux driver for NAND Flash Translation Layer      */
 /* (c) 1999 Machine Vision Holdings, Inc.             */
 /* Author: David Woodhouse <dwmw2@infradead.org>      */
-/* $Id: nftlcore.c,v 1.98 2005/11/07 11:14:21 gleixner Exp $ */
 
 /*
   The contents of this file are distributed under the GNU General
@@ -803,12 +802,8 @@ static struct mtd_blktrans_ops nftl_tr = {
         .owner          = THIS_MODULE,
 };
 
-extern char nftlmountrev[];
-
 static int __init init_nftl(void)
 {
-        printk(KERN_INFO "NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c %s\n", nftlmountrev);
-
         return register_mtd_blktrans(&nftl_tr);
 }
 
diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c
index 345e6eff89ce..ccc4f209fbb5 100644
--- a/drivers/mtd/nftlmount.c
+++ b/drivers/mtd/nftlmount.c
@@ -4,8 +4,6 @@
  * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
  * Copyright (C) 2000 Netgem S.A.
  *
- * $Id: nftlmount.c,v 1.41 2005/11/07 11:14:21 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -31,8 +29,6 @@
 
 #define SECTORSIZE 512
 
-char nftlmountrev[]="$Revision: 1.41 $";
-
 /* find_boot_record: Find the NFTL Media Header and its Spare copy which contains the
  *      various device information of the NFTL partition and Bad Unit Table. Update
  *      the ReplUnitTable[] table accroding to the Bad Unit Table. ReplUnitTable[]
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 5d7965f7e9ce..926cf3a4135d 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -325,28 +325,11 @@ static int onenand_wait(struct mtd_info *mtd, int state)
 
         ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
 
-        if (ctrl & ONENAND_CTRL_ERROR) {
-                printk(KERN_ERR "onenand_wait: controller error = 0x%04x\n", ctrl);
-                if (ctrl & ONENAND_CTRL_LOCK)
-                        printk(KERN_ERR "onenand_wait: it's locked error.\n");
-                if (state == FL_READING) {
-                        /*
-                         * A power loss while writing can result in a page
-                         * becoming unreadable.  When the device is mounted
-                         * again, reading that page gives controller errors.
-                         * Upper level software like JFFS2 treat -EIO as fatal,
-                         * refusing to mount at all.  That means it is necessary
-                         * to treat the error as an ECC error to allow recovery.
-                         * Note that typically in this case, the eraseblock can
-                         * still be erased and rewritten i.e. it has not become
-                         * a bad block.
-                         */
-                        mtd->ecc_stats.failed++;
-                        return -EBADMSG;
-                }
-                return -EIO;
-        }
-
+        /*
+         * In the Spec. it checks the controller status first
+         * However if you get the correct information in case of
+         * power off recovery (POR) test, it should read ECC status first
+         */
         if (interrupt & ONENAND_INT_READ) {
                 int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
                 if (ecc) {
@@ -364,6 +347,15 @@ static int onenand_wait(struct mtd_info *mtd, int state)
                 return -EIO;
         }
 
+        /* If there's controller error, it's a real error */
+        if (ctrl & ONENAND_CTRL_ERROR) {
+                printk(KERN_ERR "onenand_wait: controller error = 0x%04x\n",
+                        ctrl);
+                if (ctrl & ONENAND_CTRL_LOCK)
+                        printk(KERN_ERR "onenand_wait: it's locked error.\n");
+                return -EIO;
+        }
+
         return 0;
 }
 
@@ -1135,22 +1127,26 @@ static int onenand_bbt_wait(struct mtd_info *mtd, int state)
         interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
         ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
 
-        /* Initial bad block case: 0x2400 or 0x0400 */
-        if (ctrl & ONENAND_CTRL_ERROR) {
-                printk(KERN_DEBUG "onenand_bbt_wait: controller error = 0x%04x\n", ctrl);
-                return ONENAND_BBT_READ_ERROR;
-        }
-
         if (interrupt & ONENAND_INT_READ) {
                 int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
-                if (ecc & ONENAND_ECC_2BIT_ALL)
+                if (ecc & ONENAND_ECC_2BIT_ALL) {
+                        printk(KERN_INFO "onenand_bbt_wait: ecc error = 0x%04x"
+                                ", controller error 0x%04x\n", ecc, ctrl);
                         return ONENAND_BBT_READ_ERROR;
+                }
         } else {
                 printk(KERN_ERR "onenand_bbt_wait: read timeout!"
                         "ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
                 return ONENAND_BBT_READ_FATAL_ERROR;
         }
 
+        /* Initial bad block case: 0x2400 or 0x0400 */
+        if (ctrl & ONENAND_CTRL_ERROR) {
+                printk(KERN_DEBUG "onenand_bbt_wait: "
+                        "controller error = 0x%04x\n", ctrl);
+                return ONENAND_BBT_READ_ERROR;
+        }
+
         return 0;
 }
 
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index c5030f94f04e..2d600a1bf2aa 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -1,6 +1,4 @@
 /*
- * $Id: redboot.c,v 1.21 2006/03/30 18:34:37 bjd Exp $
- *
  * Parse RedBoot-style Flash Image System (FIS) tables and
  * produce a Linux partition array to match.
  */
diff --git a/drivers/mtd/rfd_ftl.c b/drivers/mtd/rfd_ftl.c
index c84e45465499..e538c0a72abb 100644
--- a/drivers/mtd/rfd_ftl.c
+++ b/drivers/mtd/rfd_ftl.c
@@ -3,8 +3,6 @@
  *
  * Copyright (C) 2005  Sean Young <sean@mess.org>
  *
- * $Id: rfd_ftl.c,v 1.8 2006/01/15 12:51:44 sean Exp $
- *
  * This type of flash translation layer (FTL) is used by the Embedded BIOS
  * by General Software. It is known as the Resident Flash Disk (RFD), see:
  *
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index c0c141f6fde1..cd219ef55254 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -38,7 +38,7 @@ const struct file_operations jffs2_dir_operations =
 {
         .read =         generic_read_dir,
         .readdir =      jffs2_readdir,
-        .ioctl =        jffs2_ioctl,
+        .unlocked_ioctl=jffs2_ioctl,
         .fsync =        jffs2_fsync
 };
 
diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c
index 5e920343b2c5..5a98aa87c853 100644
--- a/fs/jffs2/file.c
+++ b/fs/jffs2/file.c
@@ -46,7 +46,7 @@ const struct file_operations jffs2_file_operations =
         .aio_read =     generic_file_aio_read,
         .write =        do_sync_write,
         .aio_write =    generic_file_aio_write,
-        .ioctl =        jffs2_ioctl,
+        .unlocked_ioctl=jffs2_ioctl,
         .mmap =         generic_file_readonly_mmap,
         .fsync =        jffs2_fsync,
         .splice_read =  generic_file_splice_read,
diff --git a/fs/jffs2/ioctl.c b/fs/jffs2/ioctl.c
index e2177210f621..9d41f43e47bb 100644
--- a/fs/jffs2/ioctl.c
+++ b/fs/jffs2/ioctl.c
@@ -12,8 +12,7 @@
 #include <linux/fs.h>
 #include "nodelist.h"
 
-int jffs2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
-                unsigned long arg)
+long jffs2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
         /* Later, this will provide for lsattr.jffs2 and chattr.jffs2, which
            will include compression support etc. */
diff --git a/fs/jffs2/os-linux.h b/fs/jffs2/os-linux.h
index 2cc866cf134f..5e194a5c8e29 100644
--- a/fs/jffs2/os-linux.h
+++ b/fs/jffs2/os-linux.h
@@ -167,7 +167,7 @@ int jffs2_fsync(struct file *, struct dentry *, int);
 int jffs2_do_readpage_unlock (struct inode *inode, struct page *pg);
 
 /* ioctl.c */
-int jffs2_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+long jffs2_ioctl(struct file *, unsigned int, unsigned long);
 
 /* symlink.c */
 extern const struct inode_operations jffs2_symlink_inode_operations;
diff --git a/include/asm-arm/arch-at91/at91_ecc.h b/include/asm-arm/arch-at91/at91_ecc.h
deleted file mode 100644
index 1e5a8caca2d1..000000000000
--- a/include/asm-arm/arch-at91/at91_ecc.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_ecc.h
- *
- * Error Corrected Code Controller (ECC) - System peripherals regsters.
- * Based on AT91SAM9260 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef AT91_ECC_H
-#define AT91_ECC_H
-
-#define AT91_ECC_CR             0x00                    /* Control register */
-#define         AT91_ECC_RST            (1 << 0)                /* Reset parity */
-
-#define AT91_ECC_MR             0x04                    /* Mode register */
-#define         AT91_ECC_PAGESIZE       (3 << 0)                /* Page Size */
-#define                 AT91_ECC_PAGESIZE_528           (0)
-#define                 AT91_ECC_PAGESIZE_1056          (1)
-#define                 AT91_ECC_PAGESIZE_2112          (2)
-#define                 AT91_ECC_PAGESIZE_4224          (3)
-
-#define AT91_ECC_SR             0x08                    /* Status register */
-#define         AT91_ECC_RECERR         (1 << 0)                /* Recoverable Error */
-#define         AT91_ECC_ECCERR         (1 << 1)                /* ECC Single Bit Error */
-#define         AT91_ECC_MULERR         (1 << 2)                /* Multiple Errors */
-
-#define AT91_ECC_PR             0x0c                    /* Parity register */
-#define         AT91_ECC_BITADDR        (0xf << 0)              /* Bit Error Address */
-#define         AT91_ECC_WORDADDR       (0xfff << 4)            /* Word Error Address */
-
-#define AT91_ECC_NPR            0x10                    /* NParity register */
-#define         AT91_ECC_NPARITY        (0xffff << 0)           /* NParity */
-
-#endif
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
index 94de788da76e..48bbd854f57d 100644
--- a/include/asm-arm/arch-at91/board.h
+++ b/include/asm-arm/arch-at91/board.h
@@ -89,7 +89,7 @@ struct at91_usbh_data {
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 
  /* NAND / SmartMedia */
-struct at91_nand_data {
+struct atmel_nand_data {
         u8              enable_pin;     /* chip enable */
         u8              det_pin;        /* card detect */
         u8              rdy_pin;        /* ready/busy */
@@ -98,7 +98,7 @@ struct at91_nand_data {
         u8              bus_width_16;   /* buswidth is 16 bit */
         struct mtd_partition* (*partition_info)(int, int*);
 };
-extern void __init at91_add_device_nand(struct at91_nand_data *data);
+extern void __init at91_add_device_nand(struct atmel_nand_data *data);
 
  /* I2C*/
 extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
index a3783861cdd2..893aa6d0cd11 100644
--- a/include/asm-avr32/arch-at32ap/board.h
+++ b/include/asm-avr32/arch-at32ap/board.h
@@ -97,4 +97,17 @@ struct platform_device *
 at32_add_device_cf(unsigned int id, unsigned int extint,
                 struct cf_platform_data *data);
 
+/* NAND / SmartMedia */
+struct atmel_nand_data {
+        int     enable_pin;     /* chip enable */
+        int     det_pin;        /* card detect */
+        int     rdy_pin;        /* ready/busy */
+        u8      ale;            /* address line number connected to ALE */
+        u8      cle;            /* address line number connected to CLE */
+        u8      bus_width_16;   /* buswidth is 16 bit */
+        struct mtd_partition *(*partition_info)(int size, int *num_partitions);
+};
+struct platform_device *
+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
+
 #endif /* __ASM_ARCH_BOARD_H */
diff --git a/include/linux/jffs2.h b/include/linux/jffs2.h
index 6b563cae23df..da720bc3eb15 100644
--- a/include/linux/jffs2.h
+++ b/include/linux/jffs2.h
@@ -7,9 +7,6 @@
  *
  * For licensing information, see the file 'LICENCE' in the
  * jffs2 directory.
- *
- * $Id: jffs2.h,v 1.38 2005/09/26 11:37:23 havasi Exp $
- *
  */
 
 #ifndef __LINUX_JFFS2_H__
diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h
index 9a6e2f953cba..310e61606415 100644
--- a/include/linux/mtd/blktrans.h
+++ b/include/linux/mtd/blktrans.h
@@ -1,6 +1,4 @@
 /*
- * $Id: blktrans.h,v 1.6 2005/11/07 11:14:54 gleixner Exp $
- *
  * (C) 2003 David Woodhouse <dwmw2@infradead.org>
  *
  * Interface to Linux block layer for MTD 'translation layers'.
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
index b0ddf4b25862..d6fb115f5a07 100644
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -1,7 +1,6 @@
 
 /* Common Flash Interface structures
  * See http://support.intel.com/design/flash/technote/index.htm
- * $Id: cfi.h,v 1.57 2005/11/15 23:28:17 tpoynor Exp $
  */
 
 #ifndef __MTD_CFI_H__
diff --git a/include/linux/mtd/cfi_endian.h b/include/linux/mtd/cfi_endian.h
index 25724f7d3867..d802f7736be3 100644
--- a/include/linux/mtd/cfi_endian.h
+++ b/include/linux/mtd/cfi_endian.h
@@ -1,8 +1,3 @@
-/*
- * $Id: cfi_endian.h,v 1.11 2002/01/30 23:20:48 awozniak Exp $
- *
- */
-
 #include <asm/byteorder.h>
 
 #ifndef CONFIG_MTD_CFI_ADV_OPTIONS
diff --git a/include/linux/mtd/concat.h b/include/linux/mtd/concat.h
index ed8dc6755219..c02f3d264ecf 100644
--- a/include/linux/mtd/concat.h
+++ b/include/linux/mtd/concat.h
@@ -4,8 +4,6 @@
  * (C) 2002 Robert Kaiser <rkaiser@sysgo.de>
  *
  * This code is GPL
- *
- * $Id: concat.h,v 1.1 2002/03/08 16:34:36 rkaiser Exp $
  */
 
 #ifndef MTD_CONCAT_H
diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h
index 9addd073bf15..0a6d516ab71d 100644
--- a/include/linux/mtd/doc2000.h
+++ b/include/linux/mtd/doc2000.h
@@ -6,8 +6,6 @@
  * Copyright (C) 2002-2003 Greg Ungerer <gerg@snapgear.com>
  * Copyright (C) 2002-2003 SnapGear Inc
  *
- * $Id: doc2000.h,v 1.25 2005/11/07 11:14:54 gleixner Exp $
- *
  * Released under GPL
  */
 
diff --git a/include/linux/mtd/flashchip.h b/include/linux/mtd/flashchip.h
index 39e7d2a1be9a..08dd131301c1 100644
--- a/include/linux/mtd/flashchip.h
+++ b/include/linux/mtd/flashchip.h
@@ -5,9 +5,6 @@
  * Contains information about the location and state of a given flash device
  *
  * (C) 2000 Red Hat. GPLd.
- *
- * $Id: flashchip.h,v 1.18 2005/11/07 11:14:54 gleixner Exp $
- *
  */
 
 #ifndef __MTD_FLASHCHIP_H__
diff --git a/include/linux/mtd/ftl.h b/include/linux/mtd/ftl.h
index d99609113307..0be442f881dd 100644
--- a/include/linux/mtd/ftl.h
+++ b/include/linux/mtd/ftl.h
@@ -1,6 +1,4 @@
 /*
- * $Id: ftl.h,v 1.7 2005/11/07 11:14:54 gleixner Exp $
- *
  * Derived from (and probably identical to):
  * ftl.h 1.7 1999/10/25 20:23:17
  *
diff --git a/include/linux/mtd/gen_probe.h b/include/linux/mtd/gen_probe.h
index 256e7342ed1e..df362ddf2949 100644
--- a/include/linux/mtd/gen_probe.h
+++ b/include/linux/mtd/gen_probe.h
@@ -1,7 +1,6 @@
 /*
  * (C) 2001, 2001 Red Hat, Inc.
  * GPL'd
- * $Id: gen_probe.h,v 1.4 2005/11/07 11:14:54 gleixner Exp $
  */
 
 #ifndef __LINUX_MTD_GEN_PROBE_H__
diff --git a/include/linux/mtd/inftl.h b/include/linux/mtd/inftl.h
index 85fd041d44ad..64ee53ce95a9 100644
--- a/include/linux/mtd/inftl.h
+++ b/include/linux/mtd/inftl.h
@@ -2,8 +2,6 @@
  *      inftl.h -- defines to support the Inverse NAND Flash Translation Layer
  *
  *      (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- *
- *      $Id: inftl.h,v 1.7 2005/06/13 13:08:45 sean Exp $
  */
 
 #ifndef __MTD_INFTL_H__
@@ -52,8 +50,6 @@ struct INFTLrecord {
 int INFTL_mount(struct INFTLrecord *s);
 int INFTL_formatblock(struct INFTLrecord *s, int block);
 
-extern char inftlmountrev[];
-
 void INFTL_dumptables(struct INFTLrecord *s);
 void INFTL_dumpVUchains(struct INFTLrecord *s);
 
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index 9c1d95491f8b..aa30244492c6 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -1,6 +1,5 @@
 
 /* Overhauled routines for dealing with different mmap regions of flash */
-/* $Id: map.h,v 1.54 2005/11/07 11:14:54 gleixner Exp $ */
 
 #ifndef __LINUX_MTD_MAP_H__
 #define __LINUX_MTD_MAP_H__
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 8b5d49133ec6..4ed40caff4e5 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -1,6 +1,4 @@
 /*
- * $Id: mtd.h,v 1.61 2005/11/07 11:14:54 gleixner Exp $
- *
  * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
  *
  * Released under GPL
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 53ea3dc8b0e8..83f678702dff 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -5,8 +5,6 @@
  *                     Steven J. Hill <sjhill@realitydiluted.com>
  *                     Thomas Gleixner <tglx@linutronix.de>
  *
- * $Id: nand.h,v 1.74 2005/09/15 13:58:50 vwool Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -179,6 +177,7 @@ typedef enum {
 #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
 #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
 #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
+#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT))
 
 /* Mask to zero out the chip options, which come from the id table */
 #define NAND_CHIPOPTIONS_MSK    (0x0000ffff & ~NAND_NO_AUTOINCR)
@@ -276,6 +275,10 @@ struct nand_ecc_ctrl {
         int                     (*read_page)(struct mtd_info *mtd,
                                              struct nand_chip *chip,
                                              uint8_t *buf);
+        int                     (*read_subpage)(struct mtd_info *mtd,
+                                             struct nand_chip *chip,
+                                             uint32_t offs, uint32_t len,
+                                             uint8_t *buf);
         void                    (*write_page)(struct mtd_info *mtd,
                                               struct nand_chip *chip,
                                               const uint8_t *buf);
diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h
index 12c5bc342ead..090da505425d 100644
--- a/include/linux/mtd/nand_ecc.h
+++ b/include/linux/mtd/nand_ecc.h
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  *
- * $Id: nand_ecc.h,v 1.4 2004/06/17 02:35:02 dbrown Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/include/linux/mtd/nftl.h b/include/linux/mtd/nftl.h
index 001eec50cac6..dcaf611ed748 100644
--- a/include/linux/mtd/nftl.h
+++ b/include/linux/mtd/nftl.h
@@ -1,6 +1,4 @@
 /*
- * $Id: nftl.h,v 1.16 2004/06/30 14:49:00 dbrown Exp $
- *
  * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>
  */
 
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 7c37d7e55abc..5014f7a9f5df 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -4,8 +4,6 @@
  * (C) 2000 Nicolas Pitre <nico@cam.org>
  *
  * This code is GPL
- *
- * $Id: partitions.h,v 1.17 2005/11/07 11:14:55 gleixner Exp $
  */
 
 #ifndef MTD_PARTITIONS_H
diff --git a/include/linux/mtd/physmap.h b/include/linux/mtd/physmap.h
index 0dc07d5f3354..c8e63a5ee72e 100644
--- a/include/linux/mtd/physmap.h
+++ b/include/linux/mtd/physmap.h
@@ -2,8 +2,6 @@
  * For boards with physically mapped flash and using
  * drivers/mtd/maps/physmap.c mapping driver.
  *
- * $Id: physmap.h,v 1.4 2005/11/07 11:14:55 gleixner Exp $
- *
  * Copyright (C) 2003 MontaVista Software Inc.
  * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
  *
diff --git a/include/linux/mtd/plat-ram.h b/include/linux/mtd/plat-ram.h
index 0e37ad07bce2..e07890aff1cf 100644
--- a/include/linux/mtd/plat-ram.h
+++ b/include/linux/mtd/plat-ram.h
@@ -6,8 +6,6 @@
  *
  * Generic platform device based RAM map
  *
- * $Id: plat-ram.h,v 1.2 2005/01/24 00:37:40 bjd Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/include/linux/mtd/pmc551.h b/include/linux/mtd/pmc551.h
index 5cc070c24d88..27ad40aed19f 100644
--- a/include/linux/mtd/pmc551.h
+++ b/include/linux/mtd/pmc551.h
@@ -1,6 +1,4 @@
 /*
- * $Id: pmc551.h,v 1.6 2005/11/07 11:14:55 gleixner Exp $
- *
  * PMC551 PCI Mezzanine Ram Device
  *
  * Author:
@@ -17,7 +15,7 @@
 
 #include <linux/mtd/mtd.h>
 
-#define PMC551_VERSION "$Id: pmc551.h,v 1.6 2005/11/07 11:14:55 gleixner Exp $\n"\
+#define PMC551_VERSION \
        "Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.\n"
 
 /*
diff --git a/include/linux/mtd/xip.h b/include/linux/mtd/xip.h
index e9d40bdde48c..36efcba15ecd 100644
--- a/include/linux/mtd/xip.h
+++ b/include/linux/mtd/xip.h
@@ -11,8 +11,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.5 2005/11/07 11:14:55 gleixner Exp $
  */
 
 #ifndef __LINUX_MTD_XIP_H__
diff --git a/include/mtd/inftl-user.h b/include/mtd/inftl-user.h
index 9b1e2526b45e..e17eda302b2d 100644
--- a/include/mtd/inftl-user.h
+++ b/include/mtd/inftl-user.h
@@ -1,6 +1,4 @@
 /*
- * $Id: inftl-user.h,v 1.2 2005/11/07 11:14:56 gleixner Exp $
- *
  * Parts of INFTL headers shared with userspace
  *
  */
diff --git a/include/mtd/jffs2-user.h b/include/mtd/jffs2-user.h
index d508ef0ae091..001685d7fa88 100644
--- a/include/mtd/jffs2-user.h
+++ b/include/mtd/jffs2-user.h
@@ -1,6 +1,4 @@
 /*
- * $Id: jffs2-user.h,v 1.1 2004/05/05 11:57:54 dwmw2 Exp $
- *
  * JFFS2 definitions for use in user space only
  */
 
diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
index 615072c4da04..c6c61cd5a254 100644
--- a/include/mtd/mtd-abi.h
+++ b/include/mtd/mtd-abi.h
@@ -1,6 +1,4 @@
 /*
- * $Id: mtd-abi.h,v 1.13 2005/11/07 11:14:56 gleixner Exp $
- *
  * Portions of MTD ABI definition which are shared by kernel and user space
  */
 
diff --git a/include/mtd/mtd-user.h b/include/mtd/mtd-user.h
index 713f34d3e62e..170ceca3b2d0 100644
--- a/include/mtd/mtd-user.h
+++ b/include/mtd/mtd-user.h
@@ -1,6 +1,4 @@
 /*
- * $Id: mtd-user.h,v 1.2 2004/05/05 14:44:57 dwmw2 Exp $
- *
  * MTD ABI header for use by user space only.
  */
 
diff --git a/include/mtd/nftl-user.h b/include/mtd/nftl-user.h
index b2bca18e7311..390d21c080aa 100644
--- a/include/mtd/nftl-user.h
+++ b/include/mtd/nftl-user.h
@@ -1,6 +1,4 @@
 /*
- * $Id: nftl-user.h,v 1.2 2005/11/07 11:14:56 gleixner Exp $
- *
  * Parts of NFTL headers shared with userspace
  *
  */