treewide: transciever/transceiver spelling fixes

Just tyops.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 files changed, 15 insertions, 15 deletions

diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index 0011055bc3f9..5dfd1195a5a7 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -34,7 +34,7 @@
 #define CORGI_GPIO_LCDCON_CS            (19) /* LCD Control Chip Select */
 #define CORGI_GPIO_MAX1111_CS           (20) /* MAX1111 Chip Select */
 #define CORGI_GPIO_ADC_TEMP_ON          (21) /* Select battery voltage or temperature */
-#define CORGI_GPIO_IR_ON                        (22) /* Enable IR Transciever */
+#define CORGI_GPIO_IR_ON                        (22) /* Enable IR Transceiver */
 #define CORGI_GPIO_ADS7846_CS           (24) /* ADS7846 Chip Select */
 #define CORGI_GPIO_SD_PWR                       (33) /* MMC/SD Power */
 #define CORGI_GPIO_CHRG_ON                      (38) /* Enable battery Charging */
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
index ab1443f8bd89..4cf28f670706 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
@@ -56,9 +56,9 @@
 #define UDCFNR          __REG(0x40600014) /* UDC Frame Number Register */
 #define UDCOTGICR       __REG(0x40600018) /* UDC On-The-Go interrupt control */
 #define UDCOTGICR_IESF  (1 << 24)       /* OTG SET_FEATURE command recvd */
-#define UDCOTGICR_IEXR  (1 << 17)       /* Extra Transciever Interrupt
+#define UDCOTGICR_IEXR  (1 << 17)       /* Extra Transceiver Interrupt
                                            Rising Edge Interrupt Enable */
-#define UDCOTGICR_IEXF  (1 << 16)       /* Extra Transciever Interrupt
+#define UDCOTGICR_IEXF  (1 << 16)       /* Extra Transceiver Interrupt
                                            Falling Edge Interrupt Enable */
 #define UDCOTGICR_IEVV40R (1 << 9)      /* OTG Vbus Valid 4.0V Rising Edge
                                            Interrupt Enable */
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 9ed0f90cfe23..0f2e522f387d 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -77,7 +77,7 @@ static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
 static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
         /* SoC core supply, no device */
         REGULATOR_SUPPLY("v-intcore", NULL),
-        /* USB Transciever */
+        /* USB Transceiver */
         REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
 };
 
diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
index 3df1bc80f37a..3876a2478bd7 100644
--- a/drivers/i2c/busses/i2c-highlander.c
+++ b/drivers/i2c/busses/i2c-highlander.c
@@ -227,7 +227,7 @@ static int highlander_i2c_read(struct highlander_i2c_dev *dev)
 
         /*
          * The R0P7780LC0011RL FPGA needs a significant delay between
-         * data read cycles, otherwise the transciever gets confused and
+         * data read cycles, otherwise the transceiver gets confused and
          * garbage is returned when the read is subsequently aborted.
          *
          * It is not sufficient to wait for BBSY.
diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c
index 48ee51bb9e50..a19228563efd 100644
--- a/drivers/net/eexpress.c
+++ b/drivers/net/eexpress.c
@@ -365,7 +365,7 @@ static int __init do_express_probe(struct net_device *dev)
                         dev->irq = mca_irqmap[(pos1>>4)&0x7];
 
                         /*
-                         * XXX: Transciever selection is done
+                         * XXX: Transceiver selection is done
                          * differently on the MCA version.
                          * How to get it to select something
                          * other than external/AUI is currently
diff --git a/drivers/net/irda/toim3232-sir.c b/drivers/net/irda/toim3232-sir.c
index 99e1ec02a011..19ad4606b799 100644
--- a/drivers/net/irda/toim3232-sir.c
+++ b/drivers/net/irda/toim3232-sir.c
@@ -78,7 +78,7 @@
  * Target hardware: IRWave IR320ST-2
  *
  *      The IRWave IR320ST-2 is a simple dongle based on the Vishay/Temic
- *      TOIM3232 SIR Endec and the Vishay/Temic TFDS4500 SIR IRDA transciever.
+ *      TOIM3232 SIR Endec and the Vishay/Temic TFDS4500 SIR IRDA transceiver.
  *      It uses a hex inverter and some discrete components to buffer and
  *      line convert the RS232 down to 5V.
  *
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index b78be088c4ad..ab2862990a5b 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -2919,7 +2919,7 @@ static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
 
         /*
          * If we're ignoring the PHY then autoneg and the internal
-         * transciever are really not going to work so don't let the
+         * transceiver are really not going to work so don't let the
          * user select them.
          */
         if (np->ignore_phy && (ecmd->autoneg == AUTONEG_ENABLE ||
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 4b4968a294b2..afb974b48b33 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -743,7 +743,7 @@ pci_ni8430_setup(struct serial_private *priv,
         len =  pci_resource_len(priv->dev, bar);
         p = ioremap_nocache(base, len);
 
-        /* enable the transciever */
+        /* enable the transceiver */
         writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE,
                p + offset + NI8430_PORTCON);
 
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index cd16231d8c73..b01696eab068 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -88,9 +88,9 @@
 #define UDCISR_INT_MASK (UDCICR_FIFOERR | UDCICR_PKTCOMPL)
 
 #define UDCOTGICR_IESF  (1 << 24)       /* OTG SET_FEATURE command recvd */
-#define UDCOTGICR_IEXR  (1 << 17)       /* Extra Transciever Interrupt
+#define UDCOTGICR_IEXR  (1 << 17)       /* Extra Transceiver Interrupt
                                            Rising Edge Interrupt Enable */
-#define UDCOTGICR_IEXF  (1 << 16)       /* Extra Transciever Interrupt
+#define UDCOTGICR_IEXF  (1 << 16)       /* Extra Transceiver Interrupt
                                            Falling Edge Interrupt Enable */
 #define UDCOTGICR_IEVV40R (1 << 9)      /* OTG Vbus Valid 4.0V Rising Edge
                                            Interrupt Enable */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index c71b0372786e..bcbd1aba961a 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1955,7 +1955,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
          *   - initializes musb->xceiv, usually by otg_get_transceiver()
          *   - stops powering VBUS
          *
-         * There are various transciever configurations.  Blackfin,
+         * There are various transceiver configurations.  Blackfin,
          * DaVinci, TUSB60x0, and others integrate them.  OMAP3 uses
          * external/discrete ones in various flavors (twl4030 family,
          * isp1504, non-OTG, etc) mostly hooking up through ULPI.
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 8c282258e1bd..ca9b690a7e40 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -660,7 +660,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
         int             ret = IRQ_NONE;
         struct isp1301  *isp = _isp;
 
-        /* update ISP1301 transciever from OTG controller */
+        /* update ISP1301 transceiver from OTG controller */
         if (otg_irq & OPRT_CHG) {
                 omap_writew(OPRT_CHG, OTG_IRQ_SRC);
                 isp1301_defer_work(isp, WORK_UPDATE_ISP);
@@ -755,7 +755,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
                 omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
                 ret = IRQ_HANDLED;
 
-        /* switch driver; the transciever code activates it,
+        /* switch driver; the transceiver code activates it,
          * ungating the udc clock or resuming OHCI.
          */
         } else if (otg_irq & DRIVER_SWITCH) {
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index f4594d76b6ea..ca398962f2d8 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -87,7 +87,7 @@ static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;	/* ID for this card */
 static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;/* Enable this card */
 static char *model[SNDRV_CARDS];
 static int omni[SNDRV_CARDS];                           /* Delta44 & 66 Omni I/O support */
-static int cs8427_timeout[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = 500}; /* CS8427 S/PDIF transciever reset timeout value in msec */
+static int cs8427_timeout[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = 500}; /* CS8427 S/PDIF transceiver reset timeout value in msec */
 static int dxr_enable[SNDRV_CARDS];                     /* DXR enable for DMX6FIRE */
 
 module_param_array(index, int, NULL, 0444);