gpio: Move GE GPIO driver to reside within GPIO subsystem

The GE GPIO driver provides basic support (set direction, read/write state)
for the GPIO provided on some GE single board computers. This patch moves
the driver from the 86xx specific platform directrory to the GPIO subsystem
so that it can be used on non-86xx boards.

Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

7 files changed, 18 insertions, 3 deletions

diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index d41857a5152d..da731c2fe984 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -131,6 +131,7 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GE_FPGA=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
 CONFIG_WATCHDOG=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index 38303ec11bcd..2149360a1e62 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -132,6 +132,7 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GE_FPGA=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
 CONFIG_WATCHDOG=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 98533973d20f..af2e8e1edba6 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -183,6 +183,8 @@ CONFIG_NVRAM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GE_FPGA=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
 CONFIG_WATCHDOG=y
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index ac6a50fdd1d1..1ee6ca8e53f7 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -7,8 +7,7 @@ obj-$(CONFIG_SMP)		+= mpc86xx_smp.o
 obj-$(CONFIG_MPC8641_HPCN)      += mpc86xx_hpcn.o
 obj-$(CONFIG_SBC8641D)          += sbc8641d.o
 obj-$(CONFIG_MPC8610_HPCD)      += mpc8610_hpcd.o
-gef-gpio-$(CONFIG_GPIOLIB)      += gef_gpio.o
-obj-$(CONFIG_GE_FPGA)   += gef_pic.o $(gef-gpio-y)
+obj-$(CONFIG_GE_FPGA)           += gef_pic.o
 obj-$(CONFIG_GEF_SBC610)        += gef_sbc610.o
 obj-$(CONFIG_GEF_SBC310)        += gef_sbc310.o
 obj-$(CONFIG_GEF_PPC9A)         += gef_ppc9a.o
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d0c41188d4e5..0409cf35adda 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -190,6 +190,17 @@ config GPIO_VX855
           additional drivers must be enabled in order to use the
           functionality of the device.
 
+config GPIO_GE_FPGA
+        bool "GE FPGA based GPIO"
+        depends on GE_FPGA
+        help
+          Support for common GPIO functionality provided on some GE Single Board
+          Computers.
+
+          This driver provides basic support (configure as input or output, read
+          and write pin state) for GPIO implemented in a number of GE single
+          board computers.
+
 comment "I2C GPIO expanders:"
 
 config GPIO_MAX7300
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index fa10df604c01..9a8fb54ae462 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_GPIO_CS5535)	+= gpio-cs5535.o
 obj-$(CONFIG_GPIO_DA9052)       += gpio-da9052.o
 obj-$(CONFIG_ARCH_DAVINCI)      += gpio-davinci.o
 obj-$(CONFIG_GPIO_EP93XX)       += gpio-ep93xx.o
+obj-$(CONFIG_GPIO_GE_FPGA)      += gpio-ge.o
 obj-$(CONFIG_GPIO_IT8761E)      += gpio-it8761e.o
 obj-$(CONFIG_GPIO_JANZ_TTL)     += gpio-janz-ttl.o
 obj-$(CONFIG_ARCH_KS8695)       += gpio-ks8695.o
diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/drivers/gpio/gpio-ge.c
index 2a703365e664..f8e628952921 100644
--- a/arch/powerpc/platforms/86xx/gef_gpio.c
+++ b/drivers/gpio/gpio-ge.c
@@ -14,7 +14,7 @@
  *
  * Configuration of output modes (totem-pole/open-drain)
  * Interrupt configuration - interrupts are always generated the FPGA relies on
- *      the I/O interrupt controllers mask to stop them propergating
+ * the I/O interrupt controllers mask to stop them propergating
  */
 
 #include <linux/kernel.h>