aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAdrian Bunk <bunk@stusta.de>2007-07-13 01:54:30 -0400
committerJens Axboe <jens.axboe@oracle.com>2007-07-16 09:02:47 -0400
commit56a68a500fcab9e3a9a49ca7fbef14230ab7d144 (patch)
tree025df1861407c76327bb80c118e1a3046032e312
parent5874c18b105cc7a24972191b7f08a93b1205a425 (diff)
more ACSI removal
This patch removes some code that became dead code after the ATARI_ACSI removal. It also indirectly fixes the following bug introduced by commit c2bcf3b8978c291e1b7f6499475c8403a259d4d6: config ATARI_SLM tristate "Atari SLM laser printer support" - depends on ATARI && ATARI_ACSI!=n + depends on ATARI Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Diffstat
-rw-r--r--Documentation/m68k/kernel-options.txt7
-rw-r--r--Documentation/networking/net-modules.txt6
-rw-r--r--drivers/block/Kconfig11
-rw-r--r--drivers/block/Makefile1
-rw-r--r--drivers/block/acsi_slm.c1032
-rw-r--r--drivers/net/Kconfig16
-rw-r--r--drivers/net/Makefile2
-rw-r--r--drivers/net/Space.c8
-rw-r--r--drivers/net/atari_bionet.c675
-rw-r--r--drivers/net/atari_pamsnet.c878
-rw-r--r--include/asm-m68k/atari_SLM.h28
-rw-r--r--include/asm-m68k/atari_acsi.h37
12 files changed, 0 insertions, 2701 deletions
diff --git a/Documentation/m68k/kernel-options.txt b/Documentation/m68k/kernel-options.txt
index 1c41db21d3c1..59108cebe163 100644
--- a/Documentation/m68k/kernel-options.txt
+++ b/Documentation/m68k/kernel-options.txt
@@ -82,13 +82,6 @@ Valid names are:
82 /dev/fd : -> 0x0200 (floppy disk) 82 /dev/fd : -> 0x0200 (floppy disk)
83 /dev/xda: -> 0x0c00 (first XT disk, unused in Linux/m68k) 83 /dev/xda: -> 0x0c00 (first XT disk, unused in Linux/m68k)
84 /dev/xdb: -> 0x0c40 (second XT disk, unused in Linux/m68k) 84 /dev/xdb: -> 0x0c40 (second XT disk, unused in Linux/m68k)
85 /dev/ada: -> 0x1c00 (first ACSI device)
86 /dev/adb: -> 0x1c10 (second ACSI device)
87 /dev/adc: -> 0x1c20 (third ACSI device)
88 /dev/add: -> 0x1c30 (forth ACSI device)
89
90The last four names are available only if the kernel has been compiled
91with Atari and ACSI support.
92 85
93 The name must be followed by a decimal number, that stands for the 86 The name must be followed by a decimal number, that stands for the
94partition number. Internally, the value of the number is just 87partition number. Internally, the value of the number is just
diff --git a/Documentation/networking/net-modules.txt b/Documentation/networking/net-modules.txt
index 0b27863f155c..98c4392dd0fd 100644
--- a/Documentation/networking/net-modules.txt
+++ b/Documentation/networking/net-modules.txt
@@ -146,12 +146,6 @@ at1700.c:
146 irq = 0 146 irq = 0
147 (Probes ports: 0x260, 0x280, 0x2A0, 0x240, 0x340, 0x320, 0x380, 0x300) 147 (Probes ports: 0x260, 0x280, 0x2A0, 0x240, 0x340, 0x320, 0x380, 0x300)
148 148
149atari_bionet.c:
150 Supports full autoprobing. (m68k/Atari)
151
152atari_pamsnet.c:
153 Supports full autoprobing. (m68k/Atari)
154
155atarilance.c: 149atarilance.c:
156 Supports full autoprobing. (m68k/Atari) 150 Supports full autoprobing. (m68k/Atari)
157 151
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 6e23af1ecbdb..95d6838c4ff3 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -59,17 +59,6 @@ config AMIGA_Z2RAM
59 To compile this driver as a module, choose M here: the 59 To compile this driver as a module, choose M here: the
60 module will be called z2ram. 60 module will be called z2ram.
61 61
62config ATARI_SLM
63 tristate "Atari SLM laser printer support"
64 depends on ATARI
65 help
66 If you have an Atari SLM laser printer, say Y to include support for
67 it in the kernel. Otherwise, say N. This driver is also available as
68 a module ( = code which can be inserted in and removed from the
69 running kernel whenever you want). The module will be called
70 acsi_slm. Be warned: the driver needs much ST-RAM and can cause
71 problems due to that fact!
72
73config BLK_DEV_XD 62config BLK_DEV_XD
74 tristate "XT hard disk support" 63 tristate "XT hard disk support"
75 depends on ISA && ISA_DMA_API 64 depends on ISA && ISA_DMA_API
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index e5f98acc5d52..bba3119b28c4 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -9,7 +9,6 @@ obj-$(CONFIG_MAC_FLOPPY) += swim3.o
9obj-$(CONFIG_BLK_DEV_FD) += floppy.o 9obj-$(CONFIG_BLK_DEV_FD) += floppy.o
10obj-$(CONFIG_AMIGA_FLOPPY) += amiflop.o 10obj-$(CONFIG_AMIGA_FLOPPY) += amiflop.o
11obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o 11obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o
12obj-$(CONFIG_ATARI_SLM) += acsi_slm.o
13obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o 12obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o
14obj-$(CONFIG_BLK_DEV_RAM) += rd.o 13obj-$(CONFIG_BLK_DEV_RAM) += rd.o
15obj-$(CONFIG_BLK_DEV_LOOP) += loop.o 14obj-$(CONFIG_BLK_DEV_LOOP) += loop.o
diff --git a/drivers/block/acsi_slm.c b/drivers/block/acsi_slm.c
deleted file mode 100644
index 1d9d9b4f48cc..000000000000
--- a/drivers/block/acsi_slm.c
+++ /dev/null
@@ -1,1032 +0,0 @@
1/*
2 * acsi_slm.c -- Device driver for the Atari SLM laser printer
3 *
4 * Copyright 1995 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
5 *
6 * This file is subject to the terms and conditions of the GNU General Public
7 * License. See the file COPYING in the main directory of this archive for
8 * more details.
9 *
10 */
11
12/*
13
14Notes:
15
16The major number for SLM printers is 28 (like ACSI), but as a character
17device, not block device. The minor number is the number of the printer (if
18you have more than one SLM; currently max. 2 (#define-constant) SLMs are
19supported). The device can be opened for reading and writing. If reading it,
20you get some status infos (MODE SENSE data). Writing mode is used for the data
21to be printed. Some ioctls allow to get the printer status and to tune printer
22modes and some internal variables.
23
24A special problem of the SLM driver is the timing and thus the buffering of
25the print data. The problem is that all the data for one page must be present
26in memory when printing starts, else --when swapping occurs-- the timing could
27not be guaranteed. There are several ways to assure this:
28
29 1) Reserve a buffer of 1196k (maximum page size) statically by
30 atari_stram_alloc(). The data are collected there until they're complete,
31 and then printing starts. Since the buffer is reserved, no further
32 considerations about memory and swapping are needed. So this is the
33 simplest method, but it needs a lot of memory for just the SLM.
34
35 An striking advantage of this method is (supposed the SLM_CONT_CNT_REPROG
36 method works, see there), that there are no timing problems with the DMA
37 anymore.
38
39 2) The other method would be to reserve the buffer dynamically each time
40 printing is required. I could think of looking at mem_map where the
41 largest unallocted ST-RAM area is, taking the area, and then extending it
42 by swapping out the neighbored pages, until the needed size is reached.
43 This requires some mm hacking, but seems possible. The only obstacle could
44 be pages that cannot be swapped out (reserved pages)...
45
46 3) Another possibility would be to leave the real data in user space and to
47 work with two dribble buffers of about 32k in the driver: While the one
48 buffer is DMAed to the SLM, the other can be filled with new data. But
49 to keep the timing, that requires that the user data remain in memory and
50 are not swapped out. Requires mm hacking, too, but maybe not so bad as
51 method 2).
52
53*/
54
55#include <linux/module.h>
56
57#include <linux/errno.h>
58#include <linux/sched.h>
59#include <linux/timer.h>
60#include <linux/fs.h>
61#include <linux/major.h>
62#include <linux/kernel.h>
63#include <linux/delay.h>
64#include <linux/interrupt.h>
65#include <linux/time.h>
66#include <linux/mm.h>
67#include <linux/slab.h>
68
69#include <asm/pgtable.h>
70#include <asm/system.h>
71#include <asm/uaccess.h>
72#include <asm/atarihw.h>
73#include <asm/atariints.h>
74#include <asm/atari_acsi.h>
75#include <asm/atari_stdma.h>
76#include <asm/atari_stram.h>
77#include <asm/atari_SLM.h>
78
79
80#undef DEBUG
81
82/* Define this if the page data are continuous in physical memory. That
83 * requires less reprogramming of the ST-DMA */
84#define SLM_CONTINUOUS_DMA
85
86/* Use continuous reprogramming of the ST-DMA counter register. This is
87 * --strictly speaking-- not allowed, Atari recommends not to look at the
88 * counter register while a DMA is going on. But I don't know if that applies
89 * only for reading the register, or also writing to it. Writing only works
90 * fine for me... The advantage is that the timing becomes absolutely
91 * uncritical: Just update each, say 200ms, the counter reg to its maximum,
92 * and the DMA will work until the status byte interrupt occurs.
93 */
94#define SLM_CONT_CNT_REPROG
95
96#define CMDSET_TARG_LUN(cmd,targ,lun) \
97 do { \
98 cmd[0] = (cmd[0] & ~0xe0) | (targ)<<5; \
99 cmd[1] = (cmd[1] & ~0xe0) | (lun)<<5; \
100 } while(0)
101
102#define START_TIMER(to) mod_timer(&slm_timer, jiffies + (to))
103#define STOP_TIMER() del_timer(&slm_timer)
104
105
106static char slmreqsense_cmd[6] = { 0x03, 0, 0, 0, 0, 0 };
107static char slmprint_cmd[6] = { 0x0a, 0, 0, 0, 0, 0 };
108static char slminquiry_cmd[6] = { 0x12, 0, 0, 0, 0, 0x80 };
109static char slmmsense_cmd[6] = { 0x1a, 0, 0, 0, 255, 0 };
110#if 0
111static char slmmselect_cmd[6] = { 0x15, 0, 0, 0, 0, 0 };
112#endif
113
114
115#define MAX_SLM 2
116
117static struct slm {
118 unsigned target; /* target number */
119 unsigned lun; /* LUN in target controller */
120 atomic_t wr_ok; /* set to 0 if output part busy */
121 atomic_t rd_ok; /* set to 0 if status part busy */
122} slm_info[MAX_SLM];
123
124int N_SLM_Printers = 0;
125
126/* printer buffer */
127static unsigned char *SLMBuffer; /* start of buffer */
128static unsigned char *BufferP; /* current position in buffer */
129static int BufferSize; /* length of buffer for page size */
130
131typedef enum { IDLE, FILLING, PRINTING } SLMSTATE;
132static SLMSTATE SLMState;
133static int SLMBufOwner; /* SLM# currently using the buffer */
134
135/* DMA variables */
136#ifndef SLM_CONT_CNT_REPROG
137static unsigned long SLMCurAddr; /* current base addr of DMA chunk */
138static unsigned long SLMEndAddr; /* expected end addr */
139static unsigned long SLMSliceSize; /* size of one DMA chunk */
140#endif
141static int SLMError;
142
143/* wait queues */
144static DECLARE_WAIT_QUEUE_HEAD(slm_wait); /* waiting for buffer */
145static DECLARE_WAIT_QUEUE_HEAD(print_wait); /* waiting for printing finished */
146
147/* status codes */
148#define SLMSTAT_OK 0x00
149#define SLMSTAT_ORNERY 0x02
150#define SLMSTAT_TONER 0x03
151#define SLMSTAT_WARMUP 0x04
152#define SLMSTAT_PAPER 0x05
153#define SLMSTAT_DRUM 0x06
154#define SLMSTAT_INJAM 0x07
155#define SLMSTAT_THRJAM 0x08
156#define SLMSTAT_OUTJAM 0x09
157#define SLMSTAT_COVER 0x0a
158#define SLMSTAT_FUSER 0x0b
159#define SLMSTAT_IMAGER 0x0c
160#define SLMSTAT_MOTOR 0x0d
161#define SLMSTAT_VIDEO 0x0e
162#define SLMSTAT_SYSTO 0x10
163#define SLMSTAT_OPCODE 0x12
164#define SLMSTAT_DEVNUM 0x15
165#define SLMSTAT_PARAM 0x1a
166#define SLMSTAT_ACSITO 0x1b /* driver defined */
167#define SLMSTAT_NOTALL 0x1c /* driver defined */
168
169static char *SLMErrors[] = {
170 /* 0x00 */ "OK and ready",
171 /* 0x01 */ NULL,
172 /* 0x02 */ "ornery printer",
173 /* 0x03 */ "toner empty",
174 /* 0x04 */ "warming up",
175 /* 0x05 */ "paper empty",
176 /* 0x06 */ "drum empty",
177 /* 0x07 */ "input jam",
178 /* 0x08 */ "through jam",
179 /* 0x09 */ "output jam",
180 /* 0x0a */ "cover open",
181 /* 0x0b */ "fuser malfunction",
182 /* 0x0c */ "imager malfunction",
183 /* 0x0d */ "motor malfunction",
184 /* 0x0e */ "video malfunction",
185 /* 0x0f */ NULL,
186 /* 0x10 */ "printer system timeout",
187 /* 0x11 */ NULL,
188 /* 0x12 */ "invalid operation code",
189 /* 0x13 */ NULL,
190 /* 0x14 */ NULL,
191 /* 0x15 */ "invalid device number",
192 /* 0x16 */ NULL,
193 /* 0x17 */ NULL,
194 /* 0x18 */ NULL,
195 /* 0x19 */ NULL,
196 /* 0x1a */ "invalid parameter list",
197 /* 0x1b */ "ACSI timeout",
198 /* 0x1c */ "not all printed"
199};
200
201#define N_ERRORS (sizeof(SLMErrors)/sizeof(*SLMErrors))
202
203/* real (driver caused) error? */
204#define IS_REAL_ERROR(x) (x > 0x10)
205
206
207static struct {
208 char *name;
209 int w, h;
210} StdPageSize[] = {
211 { "Letter", 2400, 3180 },
212 { "Legal", 2400, 4080 },
213 { "A4", 2336, 3386 },
214 { "B5", 2016, 2914 }
215};
216
217#define N_STD_SIZES (sizeof(StdPageSize)/sizeof(*StdPageSize))
218
219#define SLM_BUFFER_SIZE (2336*3386/8) /* A4 for now */
220#define SLM_DMA_AMOUNT 255 /* #sectors to program the DMA for */
221
222#ifdef SLM_CONTINUOUS_DMA
223# define SLM_DMA_INT_OFFSET 0 /* DMA goes until seccnt 0, no offs */
224# define SLM_DMA_END_OFFSET 32 /* 32 Byte ST-DMA FIFO */
225# define SLM_SLICE_SIZE(w) (255*512)
226#else
227# define SLM_DMA_INT_OFFSET 32 /* 32 Byte ST-DMA FIFO */
228# define SLM_DMA_END_OFFSET 32 /* 32 Byte ST-DMA FIFO */
229# define SLM_SLICE_SIZE(w) ((254*512)/(w/8)*(w/8))
230#endif
231
232/* calculate the number of jiffies to wait for 'n' bytes */
233#ifdef SLM_CONT_CNT_REPROG
234#define DMA_TIME_FOR(n) 50
235#define DMA_STARTUP_TIME 0
236#else
237#define DMA_TIME_FOR(n) (n/1400-1)
238#define DMA_STARTUP_TIME 650
239#endif
240
241/***************************** Prototypes *****************************/
242
243static char *slm_errstr( int stat );
244static int slm_getstats( char *buffer, int device );
245static ssize_t slm_read( struct file* file, char *buf, size_t count, loff_t
246 *ppos );
247static void start_print( int device );
248static irqreturn_t slm_interrupt(int irc, void *data);
249static void slm_test_ready( unsigned long dummy );
250static void set_dma_addr( unsigned long paddr );
251static unsigned long get_dma_addr( void );
252static ssize_t slm_write( struct file *file, const char *buf, size_t count,
253 loff_t *ppos );
254static int slm_ioctl( struct inode *inode, struct file *file, unsigned int
255 cmd, unsigned long arg );
256static int slm_open( struct inode *inode, struct file *file );
257static int slm_release( struct inode *inode, struct file *file );
258static int slm_req_sense( int device );
259static int slm_mode_sense( int device, char *buffer, int abs_flag );
260#if 0
261static int slm_mode_select( int device, char *buffer, int len, int
262 default_flag );
263#endif
264static int slm_get_pagesize( int device, int *w, int *h );
265
266/************************* End of Prototypes **************************/
267
268
269static DEFINE_TIMER(slm_timer, slm_test_ready, 0, 0);
270
271static const struct file_operations slm_fops = {
272 .owner = THIS_MODULE,
273 .read = slm_read,
274 .write = slm_write,
275 .ioctl = slm_ioctl,
276 .open = slm_open,
277 .release = slm_release,
278};
279
280
281/* ---------------------------------------------------------------------- */
282/* Status Functions */
283
284
285static char *slm_errstr( int stat )
286
287{ char *p;
288 static char str[22];
289
290 stat &= 0x1f;
291 if (stat >= 0 && stat < N_ERRORS && (p = SLMErrors[stat]))
292 return( p );
293 sprintf( str, "unknown status 0x%02x", stat );
294 return( str );
295}
296
297
298static int slm_getstats( char *buffer, int device )
299
300{ int len = 0, stat, i, w, h;
301 unsigned char buf[256];
302
303 stat = slm_mode_sense( device, buf, 0 );
304 if (IS_REAL_ERROR(stat))
305 return( -EIO );
306
307#define SHORTDATA(i) ((buf[i] << 8) | buf[i+1])
308#define BOOLDATA(i,mask) ((buf[i] & mask) ? "on" : "off")
309
310 w = SHORTDATA( 3 );
311 h = SHORTDATA( 1 );
312
313 len += sprintf( buffer+len, "Status\t\t%s\n",
314 slm_errstr( stat ) );
315 len += sprintf( buffer+len, "Page Size\t%dx%d",
316 w, h );
317
318 for( i = 0; i < N_STD_SIZES; ++i ) {
319 if (w == StdPageSize[i].w && h == StdPageSize[i].h)
320 break;
321 }
322 if (i < N_STD_SIZES)
323 len += sprintf( buffer+len, " (%s)", StdPageSize[i].name );
324 buffer[len++] = '\n';
325
326 len += sprintf( buffer+len, "Top/Left Margin\t%d/%d\n",
327 SHORTDATA( 5 ), SHORTDATA( 7 ) );
328 len += sprintf( buffer+len, "Manual Feed\t%s\n",
329 BOOLDATA( 9, 0x01 ) );
330 len += sprintf( buffer+len, "Input Select\t%d\n",
331 (buf[9] >> 1) & 7 );
332 len += sprintf( buffer+len, "Auto Select\t%s\n",
333 BOOLDATA( 9, 0x10 ) );
334 len += sprintf( buffer+len, "Prefeed Paper\t%s\n",
335 BOOLDATA( 9, 0x20 ) );
336 len += sprintf( buffer+len, "Thick Pixels\t%s\n",
337 BOOLDATA( 9, 0x40 ) );
338 len += sprintf( buffer+len, "H/V Resol.\t%d/%d dpi\n",
339 SHORTDATA( 12 ), SHORTDATA( 10 ) );
340 len += sprintf( buffer+len, "System Timeout\t%d\n",
341 buf[14] );
342 len += sprintf( buffer+len, "Scan Time\t%d\n",
343 SHORTDATA( 15 ) );
344 len += sprintf( buffer+len, "Page Count\t%d\n",
345 SHORTDATA( 17 ) );
346 len += sprintf( buffer+len, "In/Out Cap.\t%d/%d\n",
347 SHORTDATA( 19 ), SHORTDATA( 21 ) );
348 len += sprintf( buffer+len, "Stagger Output\t%s\n",
349 BOOLDATA( 23, 0x01 ) );
350 len += sprintf( buffer+len, "Output Select\t%d\n",
351 (buf[23] >> 1) & 7 );
352 len += sprintf( buffer+len, "Duplex Print\t%s\n",
353 BOOLDATA( 23, 0x10 ) );
354 len += sprintf( buffer+len, "Color Sep.\t%s\n",
355 BOOLDATA( 23, 0x20 ) );
356
357 return( len );
358}
359
360
361static ssize_t slm_read( struct file *file, char *buf, size_t count,
362 loff_t *ppos )
363
364{
365 struct inode *node = file->f_path.dentry->d_inode;
366 unsigned long page;
367 int length;
368 int end;
369
370 if (!(page = __get_free_page( GFP_KERNEL )))
371 return( -ENOMEM );
372
373 length = slm_getstats( (char *)page, iminor(node) );
374 if (length < 0) {
375 count = length;
376 goto out;
377 }
378 if (file->f_pos >= length) {
379 count = 0;
380 goto out;
381 }
382 if (count + file->f_pos > length)
383 count = length - file->f_pos;
384 end = count + file->f_pos;
385 if (copy_to_user(buf, (char *)page + file->f_pos, count)) {
386 count = -EFAULT;
387 goto out;
388 }
389 file->f_pos = end;
390out: free_page( page );
391 return( count );
392}
393
394
395/* ---------------------------------------------------------------------- */
396/* Printing */
397
398
399static void start_print( int device )
400
401{ struct slm *sip = &slm_info[device];
402 unsigned char *cmd;
403 unsigned long paddr;
404 int i;
405
406 stdma_lock( slm_interrupt, NULL );
407
408 CMDSET_TARG_LUN( slmprint_cmd, sip->target, sip->lun );
409 cmd = slmprint_cmd;
410 paddr = virt_to_phys( SLMBuffer );
411 dma_cache_maintenance( paddr, virt_to_phys(BufferP)-paddr, 1 );
412 DISABLE_IRQ();
413
414 /* Low on A1 */
415 dma_wd.dma_mode_status = 0x88;
416 MFPDELAY();
417
418 /* send the command bytes except the last */
419 for( i = 0; i < 5; ++i ) {
420 DMA_LONG_WRITE( *cmd++, 0x8a );
421 udelay(20);
422 if (!acsi_wait_for_IRQ( HZ/2 )) {
423 SLMError = 1;
424 return; /* timeout */
425 }
426 }
427 /* last command byte */
428 DMA_LONG_WRITE( *cmd++, 0x82 );
429 MFPDELAY();
430 /* set DMA address */
431 set_dma_addr( paddr );
432 /* program DMA for write and select sector counter reg */
433 dma_wd.dma_mode_status = 0x192;
434 MFPDELAY();
435 /* program for 255*512 bytes and start DMA */
436 DMA_LONG_WRITE( SLM_DMA_AMOUNT, 0x112 );
437
438#ifndef SLM_CONT_CNT_REPROG
439 SLMCurAddr = paddr;
440 SLMEndAddr = paddr + SLMSliceSize + SLM_DMA_INT_OFFSET;
441#endif
442 START_TIMER( DMA_STARTUP_TIME + DMA_TIME_FOR( SLMSliceSize ));
443#if !defined(SLM_CONT_CNT_REPROG) && defined(DEBUG)
444 printk( "SLM: CurAddr=%#lx EndAddr=%#lx timer=%ld\n",
445 SLMCurAddr, SLMEndAddr, DMA_TIME_FOR( SLMSliceSize ) );
446#endif
447
448 ENABLE_IRQ();
449}
450
451
452/* Only called when an error happened or at the end of a page */
453
454static irqreturn_t slm_interrupt(int irc, void *data)
455
456{ unsigned long addr;
457 int stat;
458
459 STOP_TIMER();
460 addr = get_dma_addr();
461 stat = acsi_getstatus();
462 SLMError = (stat < 0) ? SLMSTAT_ACSITO :
463 (addr < virt_to_phys(BufferP)) ? SLMSTAT_NOTALL :
464 stat;
465
466 dma_wd.dma_mode_status = 0x80;
467 MFPDELAY();
468#ifdef DEBUG
469 printk( "SLM: interrupt, addr=%#lx, error=%d\n", addr, SLMError );
470#endif
471
472 wake_up( &print_wait );
473 stdma_release();
474 ENABLE_IRQ();
475 return IRQ_HANDLED;
476}
477
478
479static void slm_test_ready( unsigned long dummy )
480
481{
482#ifdef SLM_CONT_CNT_REPROG
483 /* program for 255*512 bytes again */
484 dma_wd.fdc_acces_seccount = SLM_DMA_AMOUNT;
485 START_TIMER( DMA_TIME_FOR(0) );
486#ifdef DEBUG
487 printk( "SLM: reprogramming timer for %d jiffies, addr=%#lx\n",
488 DMA_TIME_FOR(0), get_dma_addr() );
489#endif
490
491#else /* !SLM_CONT_CNT_REPROG */
492
493 unsigned long flags, addr;
494 int d, ti;
495#ifdef DEBUG
496 struct timeval start_tm, end_tm;
497 int did_wait = 0;
498#endif
499
500 local_irq_save(flags);
501
502 addr = get_dma_addr();
503 if ((d = SLMEndAddr - addr) > 0) {
504 local_irq_restore(flags);
505
506 /* slice not yet finished, decide whether to start another timer or to
507 * busy-wait */
508 ti = DMA_TIME_FOR( d );
509 if (ti > 0) {
510#ifdef DEBUG
511 printk( "SLM: reprogramming timer for %d jiffies, rest %d bytes\n",
512 ti, d );
513#endif
514 START_TIMER( ti );
515 return;
516 }
517 /* wait for desired end address to be reached */
518#ifdef DEBUG
519 do_gettimeofday( &start_tm );
520 did_wait = 1;
521#endif
522 local_irq_disable();
523 while( get_dma_addr() < SLMEndAddr )
524 barrier();
525 }
526
527 /* slice finished, start next one */
528 SLMCurAddr += SLMSliceSize;
529
530#ifdef SLM_CONTINUOUS_DMA
531 /* program for 255*512 bytes again */
532 dma_wd.fdc_acces_seccount = SLM_DMA_AMOUNT;
533#else
534 /* set DMA address;
535 * add 2 bytes for the ones in the SLM controller FIFO! */
536 set_dma_addr( SLMCurAddr + 2 );
537 /* toggle DMA to write and select sector counter reg */
538 dma_wd.dma_mode_status = 0x92;
539 MFPDELAY();
540 dma_wd.dma_mode_status = 0x192;
541 MFPDELAY();
542 /* program for 255*512 bytes and start DMA */
543 DMA_LONG_WRITE( SLM_DMA_AMOUNT, 0x112 );
544#endif
545
546 local_irq_restore(flags);
547
548#ifdef DEBUG
549 if (did_wait) {
550 int ms;
551 do_gettimeofday( &end_tm );
552 ms = (end_tm.tv_sec*1000000+end_tm.tv_usec) -
553 (start_tm.tv_sec*1000000+start_tm.tv_usec);
554 printk( "SLM: did %ld.%ld ms busy waiting for %d bytes\n",
555 ms/1000, ms%1000, d );
556 }
557 else
558 printk( "SLM: didn't wait (!)\n" );
559#endif
560
561 if ((unsigned char *)PTOV( SLMCurAddr + SLMSliceSize ) >= BufferP) {
562 /* will be last slice, no timer necessary */
563#ifdef DEBUG
564 printk( "SLM: CurAddr=%#lx EndAddr=%#lx last slice -> no timer\n",
565 SLMCurAddr, SLMEndAddr );
566#endif
567 }
568 else {
569 /* not last slice */
570 SLMEndAddr = SLMCurAddr + SLMSliceSize + SLM_DMA_INT_OFFSET;
571 START_TIMER( DMA_TIME_FOR( SLMSliceSize ));
572#ifdef DEBUG
573 printk( "SLM: CurAddr=%#lx EndAddr=%#lx timer=%ld\n",
574 SLMCurAddr, SLMEndAddr, DMA_TIME_FOR( SLMSliceSize ) );
575#endif
576 }
577#endif /* SLM_CONT_CNT_REPROG */
578}
579
580
581static void set_dma_addr( unsigned long paddr )
582
583{ unsigned long flags;
584
585 local_irq_save(flags);
586 dma_wd.dma_lo = (unsigned char)paddr;
587 paddr >>= 8;
588 MFPDELAY();
589 dma_wd.dma_md = (unsigned char)paddr;
590 paddr >>= 8;
591 MFPDELAY();
592 if (ATARIHW_PRESENT( EXTD_DMA ))
593 st_dma_ext_dmahi = (unsigned short)paddr;
594 else
595 dma_wd.dma_hi = (unsigned char)paddr;
596 MFPDELAY();
597 local_irq_restore(flags);
598}
599
600
601static unsigned long get_dma_addr( void )
602
603{ unsigned long addr;
604
605 addr = dma_wd.dma_lo & 0xff;
606 MFPDELAY();
607 addr |= (dma_wd.dma_md & 0xff) << 8;
608 MFPDELAY();
609 addr |= (dma_wd.dma_hi & 0xff) << 16;
610 MFPDELAY();
611
612 return( addr );
613}
614
615
616static ssize_t slm_write( struct file *file, const char *buf, size_t count,
617 loff_t *ppos )
618
619{
620 struct inode *node = file->f_path.dentry->d_inode;
621 int device = iminor(node);
622 int n, filled, w, h;
623
624 while( SLMState == PRINTING ||
625 (SLMState == FILLING && SLMBufOwner != device) ) {
626 interruptible_sleep_on( &slm_wait );
627 if (signal_pending(current))
628 return( -ERESTARTSYS );
629 }
630 if (SLMState == IDLE) {
631 /* first data of page: get current page size */
632 if (slm_get_pagesize( device, &w, &h ))
633 return( -EIO );
634 BufferSize = w*h/8;
635 if (BufferSize > SLM_BUFFER_SIZE)
636 return( -ENOMEM );
637
638 SLMState = FILLING;
639 SLMBufOwner = device;
640 }
641
642 n = count;
643 filled = BufferP - SLMBuffer;
644 if (filled + n > BufferSize)
645 n = BufferSize - filled;
646
647 if (copy_from_user(BufferP, buf, n))
648 return -EFAULT;
649 BufferP += n;
650 filled += n;
651
652 if (filled == BufferSize) {
653 /* Check the paper size again! The user may have switched it in the
654 * time between starting the data and finishing them. Would end up in
655 * a trashy page... */
656 if (slm_get_pagesize( device, &w, &h ))
657 return( -EIO );
658 if (BufferSize != w*h/8) {
659 printk( KERN_NOTICE "slm%d: page size changed while printing\n",
660 device );
661 return( -EAGAIN );
662 }
663
664 SLMState = PRINTING;
665 /* choose a slice size that is a multiple of the line size */
666#ifndef SLM_CONT_CNT_REPROG
667 SLMSliceSize = SLM_SLICE_SIZE(w);
668#endif
669
670 start_print( device );
671 sleep_on( &print_wait );
672 if (SLMError && IS_REAL_ERROR(SLMError)) {
673 printk( KERN_ERR "slm%d: %s\n", device, slm_errstr(SLMError) );
674 n = -EIO;
675 }
676
677 SLMState = IDLE;
678 BufferP = SLMBuffer;
679 wake_up_interruptible( &slm_wait );
680 }
681
682 return( n );
683}
684
685
686/* ---------------------------------------------------------------------- */
687/* ioctl Functions */
688
689
690static int slm_ioctl( struct inode *inode, struct file *file,
691 unsigned int cmd, unsigned long arg )
692
693{ int device = iminor(inode), err;
694
695 /* I can think of setting:
696 * - manual feed
697 * - paper format
698 * - copy count
699 * - ...
700 * but haven't implemented that yet :-)
701 * BTW, has anybody better docs about the MODE SENSE/MODE SELECT data?
702 */
703 switch( cmd ) {
704
705 case SLMIORESET: /* reset buffer, i.e. empty the buffer */
706 if (!(file->f_mode & 2))
707 return( -EINVAL );
708 if (SLMState == PRINTING)
709 return( -EBUSY );
710 SLMState = IDLE;
711 BufferP = SLMBuffer;
712 wake_up_interruptible( &slm_wait );
713 return( 0 );
714
715 case SLMIOGSTAT: { /* get status */
716 int stat;
717 char *str;
718
719 stat = slm_req_sense( device );
720 if (arg) {
721 str = slm_errstr( stat );
722 if (put_user(stat,
723 (long *)&((struct SLM_status *)arg)->stat))
724 return -EFAULT;
725 if (copy_to_user( ((struct SLM_status *)arg)->str, str,
726 strlen(str) + 1))
727 return -EFAULT;
728 }
729 return( stat );
730 }
731
732 case SLMIOGPSIZE: { /* get paper size */
733 int w, h;
734
735 if ((err = slm_get_pagesize( device, &w, &h ))) return( err );
736
737 if (put_user(w, (long *)&((struct SLM_paper_size *)arg)->width))
738 return -EFAULT;
739 if (put_user(h, (long *)&((struct SLM_paper_size *)arg)->height))
740 return -EFAULT;
741 return( 0 );
742 }
743
744 case SLMIOGMFEED: /* get manual feed */
745 return( -EINVAL );
746
747 case SLMIOSPSIZE: /* set paper size */
748 return( -EINVAL );
749
750 case SLMIOSMFEED: /* set manual feed */
751 return( -EINVAL );
752
753 }
754 return( -EINVAL );
755}
756
757
758/* ---------------------------------------------------------------------- */
759/* Opening and Closing */
760
761
762static int slm_open( struct inode *inode, struct file *file )
763
764{ int device;
765 struct slm *sip;
766
767 device = iminor(inode);
768 if (device >= N_SLM_Printers)
769 return( -ENXIO );
770 sip = &slm_info[device];
771
772 if (file->f_mode & 2) {
773 /* open for writing is exclusive */
774 if ( !atomic_dec_and_test(&sip->wr_ok) ) {
775 atomic_inc(&sip->wr_ok);
776 return( -EBUSY );
777 }
778 }
779 if (file->f_mode & 1) {
780 /* open for reading is exclusive */
781 if ( !atomic_dec_and_test(&sip->rd_ok) ) {
782 atomic_inc(&sip->rd_ok);
783 return( -EBUSY );
784 }
785 }
786
787 return( 0 );
788}
789
790
791static int slm_release( struct inode *inode, struct file *file )
792
793{ int device;
794 struct slm *sip;
795
796 device = iminor(inode);
797 sip = &slm_info[device];
798
799 if (file->f_mode & 2)
800 atomic_inc( &sip->wr_ok );
801 if (file->f_mode & 1)
802 atomic_inc( &sip->rd_ok );
803
804 return( 0 );
805}
806
807
808/* ---------------------------------------------------------------------- */
809/* ACSI Primitives for the SLM */
810
811
812static int slm_req_sense( int device )
813
814{ int stat, rv;
815 struct slm *sip = &slm_info[device];
816
817 stdma_lock( NULL, NULL );
818
819 CMDSET_TARG_LUN( slmreqsense_cmd, sip->target, sip->lun );
820 if (!acsicmd_nodma( slmreqsense_cmd, 0 ) ||
821 (stat = acsi_getstatus()) < 0)
822 rv = SLMSTAT_ACSITO;
823 else
824 rv = stat & 0x1f;
825
826 ENABLE_IRQ();
827 stdma_release();
828 return( rv );
829}
830
831
832static int slm_mode_sense( int device, char *buffer, int abs_flag )
833
834{ unsigned char stat, len;
835 int rv = 0;
836 struct slm *sip = &slm_info[device];
837
838 stdma_lock( NULL, NULL );
839
840 CMDSET_TARG_LUN( slmmsense_cmd, sip->target, sip->lun );
841 slmmsense_cmd[5] = abs_flag ? 0x80 : 0;
842 if (!acsicmd_nodma( slmmsense_cmd, 0 )) {
843 rv = SLMSTAT_ACSITO;
844 goto the_end;
845 }
846
847 if (!acsi_extstatus( &stat, 1 )) {
848 acsi_end_extstatus();
849 rv = SLMSTAT_ACSITO;
850 goto the_end;
851 }
852
853 if (!acsi_extstatus( &len, 1 )) {
854 acsi_end_extstatus();
855 rv = SLMSTAT_ACSITO;
856 goto the_end;
857 }
858 buffer[0] = len;
859 if (!acsi_extstatus( buffer+1, len )) {
860 acsi_end_extstatus();
861 rv = SLMSTAT_ACSITO;
862 goto the_end;
863 }
864
865 acsi_end_extstatus();
866 rv = stat & 0x1f;
867
868 the_end:
869 ENABLE_IRQ();
870 stdma_release();
871 return( rv );
872}
873
874
875#if 0
876/* currently unused */
877static int slm_mode_select( int device, char *buffer, int len,
878 int default_flag )
879
880{ int stat, rv;
881 struct slm *sip = &slm_info[device];
882
883 stdma_lock( NULL, NULL );
884
885 CMDSET_TARG_LUN( slmmselect_cmd, sip->target, sip->lun );
886 slmmselect_cmd[5] = default_flag ? 0x80 : 0;
887 if (!acsicmd_nodma( slmmselect_cmd, 0 )) {
888 rv = SLMSTAT_ACSITO;
889 goto the_end;
890 }
891
892 if (!default_flag) {
893 unsigned char c = len;
894 if (!acsi_extcmd( &c, 1 )) {
895 rv = SLMSTAT_ACSITO;
896 goto the_end;
897 }
898 if (!acsi_extcmd( buffer, len )) {
899 rv = SLMSTAT_ACSITO;
900 goto the_end;
901 }
902 }
903
904 stat = acsi_getstatus();
905 rv = (stat < 0 ? SLMSTAT_ACSITO : stat);
906
907 the_end:
908 ENABLE_IRQ();
909 stdma_release();
910 return( rv );
911}
912#endif
913
914
915static int slm_get_pagesize( int device, int *w, int *h )
916
917{ char buf[256];
918 int stat;
919
920 stat = slm_mode_sense( device, buf, 0 );
921 ENABLE_IRQ();
922 stdma_release();
923
924 if (stat != SLMSTAT_OK)
925 return( -EIO );
926
927 *w = (buf[3] << 8) | buf[4];
928 *h = (buf[1] << 8) | buf[2];
929 return( 0 );
930}
931
932
933/* ---------------------------------------------------------------------- */
934/* Initialization */
935
936
937int attach_slm( int target, int lun )
938
939{ static int did_register;
940 int len;
941
942 if (N_SLM_Printers >= MAX_SLM) {
943 printk( KERN_WARNING "Too much SLMs\n" );
944 return( 0 );
945 }
946
947 /* do an INQUIRY */
948 udelay(100);
949 CMDSET_TARG_LUN( slminquiry_cmd, target, lun );
950 if (!acsicmd_nodma( slminquiry_cmd, 0 )) {
951 inq_timeout:
952 printk( KERN_ERR "SLM inquiry command timed out.\n" );
953 inq_fail:
954 acsi_end_extstatus();
955 return( 0 );
956 }
957 /* read status and header of return data */
958 if (!acsi_extstatus( SLMBuffer, 6 ))
959 goto inq_timeout;
960
961 if (SLMBuffer[1] != 2) { /* device type == printer? */
962 printk( KERN_ERR "SLM inquiry returned device type != printer\n" );
963 goto inq_fail;
964 }
965 len = SLMBuffer[5];
966
967 /* read id string */
968 if (!acsi_extstatus( SLMBuffer, len ))
969 goto inq_timeout;
970 acsi_end_extstatus();
971 SLMBuffer[len] = 0;
972
973 if (!did_register) {
974 did_register = 1;
975 }
976
977 slm_info[N_SLM_Printers].target = target;
978 slm_info[N_SLM_Printers].lun = lun;
979 atomic_set(&slm_info[N_SLM_Printers].wr_ok, 1 );
980 atomic_set(&slm_info[N_SLM_Printers].rd_ok, 1 );
981
982 printk( KERN_INFO " Printer: %s\n", SLMBuffer );
983 printk( KERN_INFO "Detected slm%d at id %d lun %d\n",
984 N_SLM_Printers, target, lun );
985 N_SLM_Printers++;
986 return( 1 );
987}
988
989int slm_init( void )
990
991{
992 int i;
993 if (register_chrdev( ACSI_MAJOR, "slm", &slm_fops )) {
994 printk( KERN_ERR "Unable to get major %d for ACSI SLM\n", ACSI_MAJOR );
995 return -EBUSY;
996 }
997
998 if (!(SLMBuffer = atari_stram_alloc( SLM_BUFFER_SIZE, "SLM" ))) {
999 printk( KERN_ERR "Unable to get SLM ST-Ram buffer.\n" );
1000 unregister_chrdev( ACSI_MAJOR, "slm" );
1001 return -ENOMEM;
1002 }
1003 BufferP = SLMBuffer;
1004 SLMState = IDLE;
1005
1006 return 0;
1007}
1008
1009#ifdef MODULE
1010
1011/* from acsi.c */
1012void acsi_attach_SLMs( int (*attach_func)( int, int ) );
1013
1014int init_module(void)
1015{
1016 int err;
1017
1018 if ((err = slm_init()))
1019 return( err );
1020 /* This calls attach_slm() for every target/lun where acsi.c detected a
1021 * printer */
1022 acsi_attach_SLMs( attach_slm );
1023 return( 0 );
1024}
1025
1026void cleanup_module(void)
1027{
1028 if (unregister_chrdev( ACSI_MAJOR, "slm" ) != 0)
1029 printk( KERN_ERR "acsi_slm: cleanup_module failed\n");
1030 atari_stram_free( SLMBuffer );
1031}
1032#endif
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index d17d64eb7065..71e7ef2cc99c 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -405,22 +405,6 @@ config ATARILANCE
405 on the AMD Lance chipset: RieblCard (with or without battery), or 405 on the AMD Lance chipset: RieblCard (with or without battery), or
406 PAMCard VME (also the version by Rhotron, with different addresses). 406 PAMCard VME (also the version by Rhotron, with different addresses).
407 407
408config ATARI_BIONET
409 tristate "BioNet-100 support"
410 depends on ATARI && ATARI_ACSI && BROKEN
411 help
412 Say Y to include support for BioData's BioNet-100 Ethernet adapter
413 for the ACSI port. The driver works (has to work...) with a polled
414 I/O scheme, so it's rather slow :-(
415
416config ATARI_PAMSNET
417 tristate "PAMsNet support"
418 depends on ATARI && ATARI_ACSI && BROKEN
419 help
420 Say Y to include support for the PAMsNet Ethernet adapter for the
421 ACSI port ("ACSI node"). The driver works (has to work...) with a
422 polled I/O scheme, so it's rather slow :-(
423
424config SUN3LANCE 408config SUN3LANCE
425 tristate "Sun3/Sun3x on-board LANCE support" 409 tristate "Sun3/Sun3x on-board LANCE support"
426 depends on SUN3 || SUN3X 410 depends on SUN3 || SUN3X
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index c26b8674213c..a21b98ea16ad 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -180,8 +180,6 @@ obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
180obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o 180obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
181obj-$(CONFIG_DECLANCE) += declance.o 181obj-$(CONFIG_DECLANCE) += declance.o
182obj-$(CONFIG_ATARILANCE) += atarilance.o 182obj-$(CONFIG_ATARILANCE) += atarilance.o
183obj-$(CONFIG_ATARI_BIONET) += atari_bionet.o
184obj-$(CONFIG_ATARI_PAMSNET) += atari_pamsnet.o
185obj-$(CONFIG_A2065) += a2065.o 183obj-$(CONFIG_A2065) += a2065.o
186obj-$(CONFIG_HYDRA) += hydra.o 184obj-$(CONFIG_HYDRA) += hydra.o
187obj-$(CONFIG_ARIADNE) += ariadne.o 185obj-$(CONFIG_ARIADNE) += ariadne.o
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 1c3e293fbaf7..3b79c6cf21a3 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -75,8 +75,6 @@ extern struct net_device *atarilance_probe(int unit);
75extern struct net_device *sun3lance_probe(int unit); 75extern struct net_device *sun3lance_probe(int unit);
76extern struct net_device *sun3_82586_probe(int unit); 76extern struct net_device *sun3_82586_probe(int unit);
77extern struct net_device *apne_probe(int unit); 77extern struct net_device *apne_probe(int unit);
78extern struct net_device *bionet_probe(int unit);
79extern struct net_device *pamsnet_probe(int unit);
80extern struct net_device *cs89x0_probe(int unit); 78extern struct net_device *cs89x0_probe(int unit);
81extern struct net_device *hplance_probe(int unit); 79extern struct net_device *hplance_probe(int unit);
82extern struct net_device *bagetlance_probe(int unit); 80extern struct net_device *bagetlance_probe(int unit);
@@ -264,12 +262,6 @@ static struct devprobe2 m68k_probes[] __initdata = {
264#ifdef CONFIG_APNE /* A1200 PCMCIA NE2000 */ 262#ifdef CONFIG_APNE /* A1200 PCMCIA NE2000 */
265 {apne_probe, 0}, 263 {apne_probe, 0},
266#endif 264#endif
267#ifdef CONFIG_ATARI_BIONET /* Atari Bionet Ethernet board */
268 {bionet_probe, 0},
269#endif
270#ifdef CONFIG_ATARI_PAMSNET /* Atari PAMsNet Ethernet board */
271 {pamsnet_probe, 0},
272#endif
273#ifdef CONFIG_MVME147_NET /* MVME147 internal Ethernet */ 265#ifdef CONFIG_MVME147_NET /* MVME147 internal Ethernet */
274 {mvme147lance_probe, 0}, 266 {mvme147lance_probe, 0},
275#endif 267#endif
diff --git a/drivers/net/atari_bionet.c b/drivers/net/atari_bionet.c
deleted file mode 100644
index 3d87bd2b4194..000000000000
--- a/drivers/net/atari_bionet.c
+++ /dev/null
@@ -1,675 +0,0 @@
1/* bionet.c BioNet-100 device driver for linux68k.
2 *
3 * Version: @(#)bionet.c 1.0 02/06/96
4 *
5 * Author: Hartmut Laue <laue@ifk-mp.uni-kiel.de>
6 * and Torsten Narjes <narjes@ifk-mp.uni-kiel.de>
7 *
8 * Little adaptions for integration into pl7 by Roman Hodek
9 *
10 * Some changes in bionet_poll_rx by Karl-Heinz Lohner
11 *
12 What is it ?
13 ------------
14 This driver controls the BIONET-100 LAN-Adapter which connects
15 an ATARI ST/TT via the ACSI-port to an Ethernet-based network.
16
17 This version can be compiled as a loadable module (See the
18 compile command at the bottom of this file).
19 At load time, you can optionally set the debugging level and the
20 fastest response time on the command line of 'insmod'.
21
22 'bionet_debug'
23 controls the amount of diagnostic messages:
24 0 : no messages
25 >0 : see code for meaning of printed messages
26
27 'bionet_min_poll_time' (always >=1)
28 gives the time (in jiffies) between polls. Low values
29 increase the system load (beware!)
30
31 When loaded, a net device with the name 'bio0' becomes available,
32 which can be controlled with the usual 'ifconfig' command.
33
34 It is possible to compile this driver into the kernel like other
35 (net) drivers. For this purpose, some source files (e.g. config-files
36 makefiles, Space.c) must be changed accordingly. (You may refer to
37 other drivers how to do it.) In this case, the device will be detected
38 at boot time and (probably) appear as 'eth0'.
39
40 This code is based on several sources:
41 - The driver code for a parallel port ethernet adapter by
42 Donald Becker (see file 'atp.c' from the PC linux distribution)
43 - The ACSI code by Roman Hodek for the ATARI-ACSI harddisk support
44 and DMA handling.
45 - Very limited information about moving packets in and out of the
46 BIONET-adapter from the TCP package for TOS by BioData GmbH.
47
48 Theory of Operation
49 -------------------
50 Because the ATARI DMA port is usually shared between several
51 devices (eg. harddisk, floppy) we cannot block the ACSI bus
52 while waiting for interrupts. Therefore we use a polling mechanism
53 to fetch packets from the adapter. For the same reason, we send
54 packets without checking that the previous packet has been sent to
55 the LAN. We rely on the higher levels of the networking code to detect
56 missing packets and resend them.
57
58 Before we access the ATARI DMA controller, we check if another
59 process is using the DMA. If not, we lock the DMA, perform one or
60 more packet transfers and unlock the DMA before returning.
61 We do not use 'stdma_lock' unconditionally because it is unclear
62 if the networking code can be set to sleep, which will happen if
63 another (possibly slow) device is using the DMA controller.
64
65 The polling is done via timer interrupts which periodically
66 'simulate' an interrupt from the Ethernet adapter. The time (in jiffies)
67 between polls varies depending on an estimate of the net activity.
68 The allowed range is given by the variable 'bionet_min_poll_time'
69 for the lower (fastest) limit and the constant 'MAX_POLL_TIME'
70 for the higher (slowest) limit.
71
72 Whenever a packet arrives, we switch to fastest response by setting
73 the polling time to its lowest limit. If the following poll fails,
74 because no packets have arrived, we increase the time for the next
75 poll. When the net activity is low, the polling time effectively
76 stays at its maximum value, resulting in the lowest load for the
77 machine.
78 */
79
80#define MAX_POLL_TIME 10
81
82static char version[] =
83 "bionet.c:v1.0 06-feb-96 (c) Hartmut Laue.\n";
84
85#include <linux/module.h>
86
87#include <linux/errno.h>
88#include <linux/kernel.h>
89#include <linux/jiffies.h>
90#include <linux/types.h>
91#include <linux/fcntl.h>
92#include <linux/interrupt.h>
93#include <linux/ioport.h>
94#include <linux/in.h>
95#include <linux/slab.h>
96#include <linux/string.h>
97#include <linux/delay.h>
98#include <linux/timer.h>
99#include <linux/init.h>
100#include <linux/bitops.h>
101
102#include <linux/netdevice.h>
103#include <linux/etherdevice.h>
104#include <linux/skbuff.h>
105
106#include <asm/setup.h>
107#include <asm/pgtable.h>
108#include <asm/system.h>
109#include <asm/io.h>
110#include <asm/dma.h>
111#include <asm/atarihw.h>
112#include <asm/atariints.h>
113#include <asm/atari_acsi.h>
114#include <asm/atari_stdma.h>
115
116
117/* use 0 for production, 1 for verification, >2 for debug
118 */
119#ifndef NET_DEBUG
120#define NET_DEBUG 0
121#endif
122/*
123 * Global variable 'bionet_debug'. Can be set at load time by 'insmod'
124 */
125unsigned int bionet_debug = NET_DEBUG;
126module_param(bionet_debug, int, 0);
127MODULE_PARM_DESC(bionet_debug, "bionet debug level (0-2)");
128MODULE_LICENSE("GPL");
129
130static unsigned int bionet_min_poll_time = 2;
131
132
133/* Information that need to be kept for each board.
134 */
135struct net_local {
136 struct net_device_stats stats;
137 long open_time; /* for debugging */
138 int poll_time; /* polling time varies with net load */
139};
140
141static struct nic_pkt_s { /* packet format */
142 unsigned char status;
143 unsigned char dummy;
144 unsigned char l_lo, l_hi;
145 unsigned char buffer[3000];
146} *nic_packet;
147unsigned char *phys_nic_packet;
148
149/* Index to functions, as function prototypes.
150 */
151static int bionet_open(struct net_device *dev);
152static int bionet_send_packet(struct sk_buff *skb, struct net_device *dev);
153static void bionet_poll_rx(struct net_device *);
154static int bionet_close(struct net_device *dev);
155static struct net_device_stats *net_get_stats(struct net_device *dev);
156static void bionet_tick(unsigned long);
157
158static DEFINE_TIMER(bionet_timer, bionet_tick, 0, 0);
159
160#define STRAM_ADDR(a) (((a) & 0xff000000) == 0)
161
162/* The following routines access the ethernet board connected to the
163 * ACSI port via the st_dma chip.
164 */
165#define NODE_ADR 0x60
166
167#define C_READ 8
168#define C_WRITE 0x0a
169#define C_GETEA 0x0f
170#define C_SETCR 0x0e
171
172static int
173sendcmd(unsigned int a0, unsigned int mod, unsigned int cmd) {
174 unsigned int c;
175
176 dma_wd.dma_mode_status = (mod | ((a0) ? 2 : 0) | 0x88);
177 dma_wd.fdc_acces_seccount = cmd;
178 dma_wd.dma_mode_status = (mod | 0x8a);
179
180 if( !acsi_wait_for_IRQ(HZ/2) ) /* wait for cmd ack */
181 return -1; /* timeout */
182
183 c = dma_wd.fdc_acces_seccount;
184 return (c & 0xff);
185}
186
187
188static void
189set_status(int cr) {
190 sendcmd(0,0x100,NODE_ADR | C_SETCR); /* CMD: SET CR */
191 sendcmd(1,0x100,cr);
192
193 dma_wd.dma_mode_status = 0x80;
194}
195
196static int
197get_status(unsigned char *adr) {
198 int i,c;
199
200 DISABLE_IRQ();
201 c = sendcmd(0,0x00,NODE_ADR | C_GETEA); /* CMD: GET ETH ADR*/
202 if( c < 0 ) goto gsend;
203
204 /* now read status bytes */
205
206 for (i=0; i<6; i++) {
207 dma_wd.fdc_acces_seccount = 0; /* request next byte */
208
209 if( !acsi_wait_for_IRQ(HZ/2) ) { /* wait for cmd ack */
210 c = -1;
211 goto gsend; /* timeout */
212 }
213 c = dma_wd.fdc_acces_seccount;
214 *adr++ = (unsigned char)c;
215 }
216 c = 1;
217gsend:
218 dma_wd.dma_mode_status = 0x80;
219 return c;
220}
221
222static irqreturn_t
223bionet_intr(int irq, void *data) {
224 return IRQ_HANDLED;
225}
226
227
228static int
229get_frame(unsigned long paddr, int odd) {
230 int c;
231 unsigned long flags;
232
233 DISABLE_IRQ();
234 local_irq_save(flags);
235
236 dma_wd.dma_mode_status = 0x9a;
237 dma_wd.dma_mode_status = 0x19a;
238 dma_wd.dma_mode_status = 0x9a;
239 dma_wd.fdc_acces_seccount = 0x04; /* sector count (was 5) */
240 dma_wd.dma_lo = (unsigned char)paddr;
241 paddr >>= 8;
242 dma_wd.dma_md = (unsigned char)paddr;
243 paddr >>= 8;
244 dma_wd.dma_hi = (unsigned char)paddr;
245 local_irq_restore(flags);
246
247 c = sendcmd(0,0x00,NODE_ADR | C_READ); /* CMD: READ */
248 if( c < 128 ) goto rend;
249
250 /* now read block */
251
252 c = sendcmd(1,0x00,odd); /* odd flag for address shift */
253 dma_wd.dma_mode_status = 0x0a;
254
255 if( !acsi_wait_for_IRQ(100) ) { /* wait for DMA to complete */
256 c = -1;
257 goto rend;
258 }
259 dma_wd.dma_mode_status = 0x8a;
260 dma_wd.dma_mode_status = 0x18a;
261 dma_wd.dma_mode_status = 0x8a;
262 c = dma_wd.fdc_acces_seccount;
263
264 dma_wd.dma_mode_status = 0x88;
265 c = dma_wd.fdc_acces_seccount;
266 c = 1;
267
268rend:
269 dma_wd.dma_mode_status = 0x80;
270 udelay(40);
271 acsi_wait_for_noIRQ(20);
272 return c;
273}
274
275
276static int
277hardware_send_packet(unsigned long paddr, int cnt) {
278 unsigned int c;
279 unsigned long flags;
280
281 DISABLE_IRQ();
282 local_irq_save(flags);
283
284 dma_wd.dma_mode_status = 0x19a;
285 dma_wd.dma_mode_status = 0x9a;
286 dma_wd.dma_mode_status = 0x19a;
287 dma_wd.dma_lo = (unsigned char)paddr;
288 paddr >>= 8;
289 dma_wd.dma_md = (unsigned char)paddr;
290 paddr >>= 8;
291 dma_wd.dma_hi = (unsigned char)paddr;
292
293 dma_wd.fdc_acces_seccount = 0x4; /* sector count */
294 local_irq_restore(flags);
295
296 c = sendcmd(0,0x100,NODE_ADR | C_WRITE); /* CMD: WRITE */
297 c = sendcmd(1,0x100,cnt&0xff);
298 c = sendcmd(1,0x100,cnt>>8);
299
300 /* now write block */
301
302 dma_wd.dma_mode_status = 0x10a; /* DMA enable */
303 if( !acsi_wait_for_IRQ(100) ) /* wait for DMA to complete */
304 goto end;
305
306 dma_wd.dma_mode_status = 0x19a; /* DMA disable ! */
307 c = dma_wd.fdc_acces_seccount;
308
309end:
310 c = sendcmd(1,0x100,0);
311 c = sendcmd(1,0x100,0);
312
313 dma_wd.dma_mode_status = 0x180;
314 udelay(40);
315 acsi_wait_for_noIRQ(20);
316 return( c & 0x02);
317}
318
319
320/* Check for a network adaptor of this type, and return '0' if one exists.
321 */
322struct net_device * __init bionet_probe(int unit)
323{
324 struct net_device *dev;
325 unsigned char station_addr[6];
326 static unsigned version_printed;
327 static int no_more_found; /* avoid "Probing for..." printed 4 times */
328 int i;
329 int err;
330
331 if (!MACH_IS_ATARI || no_more_found)
332 return ERR_PTR(-ENODEV);
333
334 dev = alloc_etherdev(sizeof(struct net_local));
335 if (!dev)
336 return ERR_PTR(-ENOMEM);
337 if (unit >= 0) {
338 sprintf(dev->name, "eth%d", unit);
339 netdev_boot_setup_check(dev);
340 }
341 SET_MODULE_OWNER(dev);
342
343 printk("Probing for BioNet 100 Adapter...\n");
344
345 stdma_lock(bionet_intr, NULL);
346 i = get_status(station_addr); /* Read the station address PROM. */
347 ENABLE_IRQ();
348 stdma_release();
349
350 /* Check the first three octets of the S.A. for the manufactor's code.
351 */
352
353 if( i < 0
354 || station_addr[0] != 'B'
355 || station_addr[1] != 'I'
356 || station_addr[2] != 'O' ) {
357 no_more_found = 1;
358 printk( "No BioNet 100 found.\n" );
359 free_netdev(dev);
360 return ERR_PTR(-ENODEV);
361 }
362
363 if (bionet_debug > 0 && version_printed++ == 0)
364 printk(version);
365
366 printk("%s: %s found, eth-addr: %02x-%02x-%02x:%02x-%02x-%02x.\n",
367 dev->name, "BioNet 100",
368 station_addr[0], station_addr[1], station_addr[2],
369 station_addr[3], station_addr[4], station_addr[5]);
370
371 /* Initialize the device structure. */
372
373 nic_packet = (struct nic_pkt_s *)acsi_buffer;
374 phys_nic_packet = (unsigned char *)phys_acsi_buffer;
375 if (bionet_debug > 0) {
376 printk("nic_packet at 0x%p, phys at 0x%p\n",
377 nic_packet, phys_nic_packet );
378 }
379
380 dev->open = bionet_open;
381 dev->stop = bionet_close;
382 dev->hard_start_xmit = bionet_send_packet;
383 dev->get_stats = net_get_stats;
384
385 /* Fill in the fields of the device structure with ethernet-generic
386 * values. This should be in a common file instead of per-driver.
387 */
388
389 for (i = 0; i < ETH_ALEN; i++) {
390#if 0
391 dev->broadcast[i] = 0xff;
392#endif
393 dev->dev_addr[i] = station_addr[i];
394 }
395 err = register_netdev(dev);
396 if (!err)
397 return dev;
398 free_netdev(dev);
399 return ERR_PTR(err);
400}
401
402/* Open/initialize the board. This is called (in the current kernel)
403 sometime after booting when the 'ifconfig' program is run.
404
405 This routine should set everything up anew at each open, even
406 registers that "should" only need to be set once at boot, so that
407 there is non-reboot way to recover if something goes wrong.
408 */
409static int
410bionet_open(struct net_device *dev) {
411 struct net_local *lp = netdev_priv(dev);
412
413 if (bionet_debug > 0)
414 printk("bionet_open\n");
415 stdma_lock(bionet_intr, NULL);
416
417 /* Reset the hardware here.
418 */
419 set_status(4);
420 lp->open_time = 0; /*jiffies*/
421 lp->poll_time = MAX_POLL_TIME;
422
423 dev->tbusy = 0;
424 dev->interrupt = 0;
425 dev->start = 1;
426
427 stdma_release();
428 bionet_timer.data = (long)dev;
429 bionet_timer.expires = jiffies + lp->poll_time;
430 add_timer(&bionet_timer);
431 return 0;
432}
433
434static int
435bionet_send_packet(struct sk_buff *skb, struct net_device *dev) {
436 struct net_local *lp = netdev_priv(dev);
437 unsigned long flags;
438
439 /* Block a timer-based transmit from overlapping. This could better be
440 * done with atomic_swap(1, dev->tbusy), but set_bit() works as well.
441 */
442 local_irq_save(flags);
443
444 if (stdma_islocked()) {
445 local_irq_restore(flags);
446 lp->stats.tx_errors++;
447 }
448 else {
449 int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
450 unsigned long buf = virt_to_phys(skb->data);
451 int stat;
452
453 stdma_lock(bionet_intr, NULL);
454 local_irq_restore(flags);
455 if( !STRAM_ADDR(buf+length-1) ) {
456 skb_copy_from_linear_data(skb, nic_packet->buffer,
457 length);
458 buf = (unsigned long)&((struct nic_pkt_s *)phys_nic_packet)->buffer;
459 }
460
461 if (bionet_debug >1) {
462 u_char *data = nic_packet->buffer, *p;
463 int i;
464
465 printk( "%s: TX pkt type 0x%4x from ", dev->name,
466 ((u_short *)data)[6]);
467
468 for( p = &data[6], i = 0; i < 6; i++ )
469 printk("%02x%s", *p++,i != 5 ? ":" : "" );
470 printk(" to ");
471
472 for( p = data, i = 0; i < 6; i++ )
473 printk("%02x%s", *p++,i != 5 ? ":" : "" "\n" );
474
475 printk( "%s: ", dev->name );
476 printk(" data %02x%02x %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x"
477 " %02x%02x%02x%02x len %d\n",
478 data[12], data[13], data[14], data[15], data[16], data[17], data[18], data[19],
479 data[20], data[21], data[22], data[23], data[24], data[25], data[26], data[27],
480 data[28], data[29], data[30], data[31], data[32], data[33],
481 length );
482 }
483 dma_cache_maintenance(buf, length, 1);
484
485 stat = hardware_send_packet(buf, length);
486 ENABLE_IRQ();
487 stdma_release();
488
489 dev->trans_start = jiffies;
490 dev->tbusy = 0;
491 lp->stats.tx_packets++;
492 lp->stats.tx_bytes+=length;
493 }
494 dev_kfree_skb(skb);
495
496 return 0;
497}
498
499/* We have a good packet(s), get it/them out of the buffers.
500 */
501static void
502bionet_poll_rx(struct net_device *dev) {
503 struct net_local *lp = netdev_priv(dev);
504 int boguscount = 10;
505 int pkt_len, status;
506 unsigned long flags;
507
508 local_irq_save(flags);
509 /* ++roman: Take care at locking the ST-DMA... This must be done with ints
510 * off, since otherwise an int could slip in between the question and the
511 * locking itself, and then we'd go to sleep... And locking itself is
512 * necessary to keep the floppy_change timer from working with ST-DMA
513 * registers. */
514 if (stdma_islocked()) {
515 local_irq_restore(flags);
516 return;
517 }
518 stdma_lock(bionet_intr, NULL);
519 DISABLE_IRQ();
520 local_irq_restore(flags);
521
522 if( lp->poll_time < MAX_POLL_TIME ) lp->poll_time++;
523
524 while(boguscount--) {
525 status = get_frame((unsigned long)phys_nic_packet, 0);
526
527 if( status == 0 ) break;
528
529 /* Good packet... */
530
531 dma_cache_maintenance((unsigned long)phys_nic_packet, 1520, 0);
532
533 pkt_len = (nic_packet->l_hi << 8) | nic_packet->l_lo;
534
535 lp->poll_time = bionet_min_poll_time; /* fast poll */
536 if( pkt_len >= 60 && pkt_len <= 1520 ) {
537 /* ^^^^ war 1514 KHL */
538 /* Malloc up new buffer.
539 */
540 struct sk_buff *skb = dev_alloc_skb( pkt_len + 2 );
541 if (skb == NULL) {
542 printk("%s: Memory squeeze, dropping packet.\n",
543 dev->name);
544 lp->stats.rx_dropped++;
545 break;
546 }
547
548 skb_reserve( skb, 2 ); /* 16 Byte align */
549 skb_put( skb, pkt_len ); /* make room */
550
551 /* 'skb->data' points to the start of sk_buff data area.
552 */
553 skb_copy_to_linear_data(skb, nic_packet->buffer,
554 pkt_len);
555 skb->protocol = eth_type_trans( skb, dev );
556 netif_rx(skb);
557 dev->last_rx = jiffies;
558 lp->stats.rx_packets++;
559 lp->stats.rx_bytes+=pkt_len;
560
561 /* If any worth-while packets have been received, dev_rint()
562 has done a mark_bh(INET_BH) for us and will work on them
563 when we get to the bottom-half routine.
564 */
565
566 if (bionet_debug >1) {
567 u_char *data = nic_packet->buffer, *p;
568 int i;
569
570 printk( "%s: RX pkt type 0x%4x from ", dev->name,
571 ((u_short *)data)[6]);
572
573
574 for( p = &data[6], i = 0; i < 6; i++ )
575 printk("%02x%s", *p++,i != 5 ? ":" : "" );
576 printk(" to ");
577 for( p = data, i = 0; i < 6; i++ )
578 printk("%02x%s", *p++,i != 5 ? ":" : "" "\n" );
579
580 printk( "%s: ", dev->name );
581 printk(" data %02x%02x %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x"
582 " %02x%02x%02x%02x len %d\n",
583 data[12], data[13], data[14], data[15], data[16], data[17], data[18], data[19],
584 data[20], data[21], data[22], data[23], data[24], data[25], data[26], data[27],
585 data[28], data[29], data[30], data[31], data[32], data[33],
586 pkt_len );
587 }
588 }
589 else {
590 printk(" Packet has wrong length: %04d bytes\n", pkt_len);
591 lp->stats.rx_errors++;
592 }
593 }
594 stdma_release();
595 ENABLE_IRQ();
596 return;
597}
598
599/* bionet_tick: called by bionet_timer. Reads packets from the adapter,
600 * passes them to the higher layers and restarts the timer.
601 */
602static void
603bionet_tick(unsigned long data) {
604 struct net_device *dev = (struct net_device *)data;
605 struct net_local *lp = netdev_priv(dev);
606
607 if( bionet_debug > 0 && (lp->open_time++ & 7) == 8 )
608 printk("bionet_tick: %ld\n", lp->open_time);
609
610 if( !stdma_islocked() ) bionet_poll_rx(dev);
611
612 bionet_timer.expires = jiffies + lp->poll_time;
613 add_timer(&bionet_timer);
614}
615
616/* The inverse routine to bionet_open().
617 */
618static int
619bionet_close(struct net_device *dev) {
620 struct net_local *lp = netdev_priv(dev);
621
622 if (bionet_debug > 0)
623 printk("bionet_close, open_time=%ld\n", lp->open_time);
624 del_timer(&bionet_timer);
625 stdma_lock(bionet_intr, NULL);
626
627 set_status(0);
628 lp->open_time = 0;
629
630 dev->tbusy = 1;
631 dev->start = 0;
632
633 stdma_release();
634 return 0;
635}
636
637/* Get the current statistics.
638 This may be called with the card open or closed.
639 */
640static struct net_device_stats *net_get_stats(struct net_device *dev)
641{
642 struct net_local *lp = netdev_priv(dev);
643 return &lp->stats;
644}
645
646
647#ifdef MODULE
648
649static struct net_device *bio_dev;
650
651int init_module(void)
652{
653 bio_dev = bionet_probe(-1);
654 if (IS_ERR(bio_dev))
655 return PTR_ERR(bio_dev);
656 return 0;
657}
658
659void cleanup_module(void)
660{
661 unregister_netdev(bio_dev);
662 free_netdev(bio_dev);
663}
664
665#endif /* MODULE */
666
667/* Local variables:
668 * compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/include
669 -b m68k-linuxaout -Wall -Wstrict-prototypes -O2
670 -fomit-frame-pointer -pipe -DMODULE -I../../net/inet -c bionet.c"
671 * version-control: t
672 * kept-new-versions: 5
673 * tab-width: 8
674 * End:
675 */
diff --git a/drivers/net/atari_pamsnet.c b/drivers/net/atari_pamsnet.c
deleted file mode 100644
index f7356374a2e7..000000000000
--- a/drivers/net/atari_pamsnet.c
+++ /dev/null
@@ -1,878 +0,0 @@
1/* atari_pamsnet.c PAMsNet device driver for linux68k.
2 *
3 * Version: @(#)PAMsNet.c 0.2ß 03/31/96
4 *
5 * Author: Torsten Lang <Torsten.Lang@ap.physik.uni-giessen.de>
6 * <Torsten.Lang@jung.de>
7 *
8 * This driver is based on my driver PAMSDMA.c for MiNT-Net and
9 * on the driver bionet.c written by
10 * Hartmut Laue <laue@ifk-mp.uni-kiel.de>
11 * and Torsten Narjes <narjes@ifk-mp.uni-kiel.de>
12 *
13 * Little adaptions for integration into pl7 by Roman Hodek
14 *
15 What is it ?
16 ------------
17 This driver controls the PAMsNet LAN-Adapter which connects
18 an ATARI ST/TT via the ACSI-port to an Ethernet-based network.
19
20 This version can be compiled as a loadable module (See the
21 compile command at the bottom of this file).
22 At load time, you can optionally set the debugging level and the
23 fastest response time on the command line of 'insmod'.
24
25 'pamsnet_debug'
26 controls the amount of diagnostic messages:
27 0 : no messages
28 >0 : see code for meaning of printed messages
29
30 'pamsnet_min_poll_time' (always >=1)
31 gives the time (in jiffies) between polls. Low values
32 increase the system load (beware!)
33
34 When loaded, a net device with the name 'eth?' becomes available,
35 which can be controlled with the usual 'ifconfig' command.
36
37 It is possible to compile this driver into the kernel like other
38 (net) drivers. For this purpose, some source files (e.g. config-files
39 makefiles, Space.c) must be changed accordingly. (You may refer to
40 other drivers how to do it.) In this case, the device will be detected
41 at boot time and (probably) appear as 'eth0'.
42
43 Theory of Operation
44 -------------------
45 Because the ATARI DMA port is usually shared between several
46 devices (eg. harddisk, floppy) we cannot block the ACSI bus
47 while waiting for interrupts. Therefore we use a polling mechanism
48 to fetch packets from the adapter. For the same reason, we send
49 packets without checking that the previous packet has been sent to
50 the LAN. We rely on the higher levels of the networking code to detect
51 missing packets and resend them.
52
53 Before we access the ATARI DMA controller, we check if another
54 process is using the DMA. If not, we lock the DMA, perform one or
55 more packet transfers and unlock the DMA before returning.
56 We do not use 'stdma_lock' unconditionally because it is unclear
57 if the networking code can be set to sleep, which will happen if
58 another (possibly slow) device is using the DMA controller.
59
60 The polling is done via timer interrupts which periodically
61 'simulate' an interrupt from the Ethernet adapter. The time (in jiffies)
62 between polls varies depending on an estimate of the net activity.
63 The allowed range is given by the variable 'bionet_min_poll_time'
64 for the lower (fastest) limit and the constant 'MAX_POLL_TIME'
65 for the higher (slowest) limit.
66
67 Whenever a packet arrives, we switch to fastest response by setting
68 the polling time to its lowest limit. If the following poll fails,
69 because no packets have arrived, we increase the time for the next
70 poll. When the net activity is low, the polling time effectively
71 stays at its maximum value, resulting in the lowest load for the
72 machine.
73 */
74
75#define MAX_POLL_TIME 10
76
77static char *version =
78 "pamsnet.c:v0.2beta 30-mar-96 (c) Torsten Lang.\n";
79
80#include <linux/module.h>
81
82#include <linux/kernel.h>
83#include <linux/jiffies.h>
84#include <linux/types.h>
85#include <linux/fcntl.h>
86#include <linux/interrupt.h>
87#include <linux/ioport.h>
88#include <linux/in.h>
89#include <linux/slab.h>
90#include <linux/string.h>
91#include <linux/bitops.h>
92#include <asm/system.h>
93#include <asm/pgtable.h>
94#include <asm/io.h>
95#include <asm/dma.h>
96#include <linux/errno.h>
97#include <asm/atarihw.h>
98#include <asm/atariints.h>
99#include <asm/atari_stdma.h>
100#include <asm/atari_acsi.h>
101
102#include <linux/delay.h>
103#include <linux/timer.h>
104#include <linux/init.h>
105
106#include <linux/netdevice.h>
107#include <linux/etherdevice.h>
108#include <linux/skbuff.h>
109
110#undef READ
111#undef WRITE
112
113/* use 0 for production, 1 for verification, >2 for debug
114 */
115#ifndef NET_DEBUG
116#define NET_DEBUG 0
117#endif
118/*
119 * Global variable 'pamsnet_debug'. Can be set at load time by 'insmod'
120 */
121unsigned int pamsnet_debug = NET_DEBUG;
122module_param(pamsnet_debug, int, 0);
123MODULE_PARM_DESC(pamsnet_debug, "pamsnet debug enable (0-1)");
124MODULE_LICENSE("GPL");
125
126static unsigned int pamsnet_min_poll_time = 2;
127
128
129/* Information that need to be kept for each board.
130 */
131struct net_local {
132 struct net_device_stats stats;
133 long open_time; /* for debugging */
134 int poll_time; /* polling time varies with net load */
135};
136
137static struct nic_pkt_s { /* packet format */
138 unsigned char buffer[2048];
139} *nic_packet = 0;
140unsigned char *phys_nic_packet;
141
142typedef unsigned char HADDR[6]; /* 6-byte hardware address of lance */
143
144/* Index to functions, as function prototypes.
145 */
146static void start (int target);
147static int stop (int target);
148static int testpkt (int target);
149static int sendpkt (int target, unsigned char *buffer, int length);
150static int receivepkt (int target, unsigned char *buffer);
151static int inquiry (int target, unsigned char *buffer);
152static HADDR *read_hw_addr(int target, unsigned char *buffer);
153static void setup_dma (void *address, unsigned rw_flag, int num_blocks);
154static int send_first (int target, unsigned char byte);
155static int send_1_5 (int lun, unsigned char *command, int dma);
156static int get_status (void);
157static int calc_received (void *start_address);
158
159static int pamsnet_open(struct net_device *dev);
160static int pamsnet_send_packet(struct sk_buff *skb, struct net_device *dev);
161static void pamsnet_poll_rx(struct net_device *);
162static int pamsnet_close(struct net_device *dev);
163static struct net_device_stats *net_get_stats(struct net_device *dev);
164static void pamsnet_tick(unsigned long);
165
166static irqreturn_t pamsnet_intr(int irq, void *data);
167
168static DEFINE_TIMER(pamsnet_timer, pamsnet_tick, 0, 0);
169
170#define STRAM_ADDR(a) (((a) & 0xff000000) == 0)
171
172typedef struct
173{
174 unsigned char reserved1[0x38];
175 HADDR hwaddr;
176 unsigned char reserved2[0x1c2];
177} DMAHWADDR;
178
179/*
180 * Definitions of commands understood by the PAMs DMA adaptor.
181 *
182 * In general the DMA adaptor uses LUN 0, 5, 6 and 7 on one ID changeable
183 * by the PAM's Net software.
184 *
185 * LUN 0 works as a harddisk. You can boot the PAM's Net driver there.
186 * LUN 5 works as a harddisk and lets you access the RAM and some I/O HW
187 * area. In sector 0, bytes 0x38-0x3d you find the ethernet HW address
188 * of the adaptor.
189 * LUN 6 works as a harddisk and lets you access the firmware ROM.
190 * LUN 7 lets you send and receive packets.
191 *
192 * Some commands like the INQUIRY command work identical on all used LUNs.
193 *
194 * UNKNOWN1 seems to read some data.
195 * Command length is 6 bytes.
196 * UNKNOWN2 seems to read some data (command byte 1 must be !=0). The
197 * following bytes seem to be something like an allocation length.
198 * Command length is 6 bytes.
199 * READPKT reads a packet received by the DMA adaptor.
200 * Command length is 6 bytes.
201 * WRITEPKT sends a packet transferred by the following DMA phase. The length
202 * of the packet is transferred in command bytes 3 and 4.
203 * The adaptor automatically replaces the src hw address in an ethernet
204 * packet by its own hw address.
205 * Command length is 6 bytes.
206 * INQUIRY has the same function as the INQUIRY command supported by harddisks
207 * and other SCSI devices. It lets you detect which device you found
208 * at a given address.
209 * Command length is 6 bytes.
210 * START initializes the DMA adaptor. After this command it is able to send
211 * and receive packets. There is no status byte returned!
212 * Command length is 1 byte.
213 * NUMPKTS gives back the number of received packets waiting in the queue in
214 * the status byte.
215 * Command length is 1 byte.
216 * UNKNOWN3
217 * UNKNOWN4 Function of these three commands is unknown.
218 * UNKNOWN5 The command length of these three commands is 1 byte.
219 * DESELECT immediately deselects the DMA adaptor. May important with interrupt
220 * driven operation.
221 * Command length is 1 byte.
222 * STOP resets the DMA adaptor. After this command packets can no longer
223 * be received or transferred.
224 * Command length is 6 byte.
225 */
226
227enum {UNKNOWN1=3, READPKT=8, UNKNOWN2, WRITEPKT=10, INQUIRY=18, START,
228 NUMPKTS=22, UNKNOWN3, UNKNOWN4, UNKNOWN5, DESELECT, STOP};
229
230#define READSECTOR READPKT
231#define WRITESECTOR WRITEPKT
232
233u_char *inquire8="MV PAM's NET/GK";
234
235#define DMALOW dma_wd.dma_lo
236#define DMAMID dma_wd.dma_md
237#define DMAHIGH dma_wd.dma_hi
238#define DACCESS dma_wd.fdc_acces_seccount
239
240#define MFP_GPIP mfp.par_dt_reg
241
242/* Some useful functions */
243
244#define INT (!(MFP_GPIP & 0x20))
245#define DELAY ({MFP_GPIP; MFP_GPIP; MFP_GPIP;})
246#define WRITEMODE(value) \
247 ({ u_short dummy = value; \
248 __asm__ volatile("movew %0, 0xFFFF8606" : : "d"(dummy)); \
249 DELAY; \
250 })
251#define WRITEBOTH(value1, value2) \
252 ({ u_long dummy = (u_long)(value1)<<16 | (u_short)(value2); \
253 __asm__ volatile("movel %0, 0xFFFF8604" : : "d"(dummy)); \
254 DELAY; \
255 })
256
257/* Definitions for DMODE */
258
259#define READ 0x000
260#define WRITE 0x100
261
262#define DMA_FDC 0x080
263#define DMA_ACSI 0x000
264
265#define DMA_DISABLE 0x040
266
267#define SEC_COUNT 0x010
268#define DMA_WINDOW 0x000
269
270#define REG_ACSI 0x008
271#define REG_FDC 0x000
272
273#define A1 0x002
274
275/* Timeout constants */
276
277#define TIMEOUTCMD HZ/2 /* ca. 500ms */
278#define TIMEOUTDMA HZ /* ca. 1s */
279#define COMMAND_DELAY 500 /* ca. 0.5ms */
280
281unsigned rw;
282int lance_target = -1;
283int if_up = 0;
284
285/* The following routines access the ethernet board connected to the
286 * ACSI port via the st_dma chip.
287 */
288
289/* The following lowlevel routines work on physical addresses only and assume
290 * that eventually needed buffers are
291 * - completely located in ST RAM
292 * - are contigous in the physical address space
293 */
294
295/* Setup the DMA counter */
296
297static void
298setup_dma (void *address, unsigned rw_flag, int num_blocks)
299{
300 WRITEMODE((unsigned) rw_flag | DMA_FDC | SEC_COUNT | REG_ACSI |
301 A1);
302 WRITEMODE((unsigned)(rw_flag ^ WRITE) | DMA_FDC | SEC_COUNT | REG_ACSI |
303 A1);
304 WRITEMODE((unsigned) rw_flag | DMA_FDC | SEC_COUNT | REG_ACSI |
305 A1);
306 DMALOW = (unsigned char)((unsigned long)address & 0xFF);
307 DMAMID = (unsigned char)(((unsigned long)address >> 8) & 0xFF);
308 DMAHIGH = (unsigned char)(((unsigned long)address >> 16) & 0xFF);
309 WRITEBOTH((unsigned)num_blocks & 0xFF,
310 rw_flag | DMA_FDC | DMA_WINDOW | REG_ACSI | A1);
311 rw = rw_flag;
312}
313
314/* Send the first byte of an command block */
315
316static int
317send_first (int target, unsigned char byte)
318{
319 rw = READ;
320 acsi_delay_end(COMMAND_DELAY);
321 /*
322 * wake up ACSI
323 */
324 WRITEMODE(DMA_FDC | DMA_WINDOW | REG_ACSI);
325 /*
326 * write command byte
327 */
328 WRITEBOTH((target << 5) | (byte & 0x1F), DMA_FDC |
329 DMA_WINDOW | REG_ACSI | A1);
330 return (!acsi_wait_for_IRQ(TIMEOUTCMD));
331}
332
333/* Send the rest of an command block */
334
335static int
336send_1_5 (int lun, unsigned char *command, int dma)
337{
338 int i, j;
339
340 for (i=0; i<5; i++) {
341 WRITEBOTH((!i ? (((lun & 0x7) << 5) | (command[i] & 0x1F))
342 : command[i]),
343 rw | REG_ACSI | DMA_WINDOW |
344 ((i < 4) ? DMA_FDC
345 : (dma ? DMA_ACSI
346 : DMA_FDC)) | A1);
347 if (i < 4 && (j = !acsi_wait_for_IRQ(TIMEOUTCMD)))
348 return (j);
349 }
350 return (0);
351}
352
353/* Read a status byte */
354
355static int
356get_status (void)
357{
358 WRITEMODE(DMA_FDC | DMA_WINDOW | REG_ACSI | A1);
359 acsi_delay_start();
360 return ((int)(DACCESS & 0xFF));
361}
362
363/* Calculate the number of received bytes */
364
365static int
366calc_received (void *start_address)
367{
368 return (int)(
369 (((unsigned long)DMAHIGH << 16) | ((unsigned)DMAMID << 8) | DMALOW)
370 - (unsigned long)start_address);
371}
372
373/* The following midlevel routines still work on physical addresses ... */
374
375/* start() starts the PAM's DMA adaptor */
376
377static void
378start (int target)
379{
380 send_first(target, START);
381}
382
383/* stop() stops the PAM's DMA adaptor and returns a value of zero in case of success */
384
385static int
386stop (int target)
387{
388 int ret = -1;
389 unsigned char cmd_buffer[5];
390
391 if (send_first(target, STOP))
392 goto bad;
393 cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] =
394 cmd_buffer[3] = cmd_buffer[4] = 0;
395 if (send_1_5(7, cmd_buffer, 0) ||
396 !acsi_wait_for_IRQ(TIMEOUTDMA) ||
397 get_status())
398 goto bad;
399 ret = 0;
400bad:
401 return (ret);
402}
403
404/* testpkt() returns the number of received packets waiting in the queue */
405
406static int
407testpkt(int target)
408{
409 int ret = -1;
410
411 if (send_first(target, NUMPKTS))
412 goto bad;
413 ret = get_status();
414bad:
415 return (ret);
416}
417
418/* inquiry() returns 0 when PAM's DMA found, -1 when timeout, -2 otherwise */
419/* Please note: The buffer is for internal use only but must be defined! */
420
421static int
422inquiry (int target, unsigned char *buffer)
423{
424 int ret = -1;
425 unsigned char *vbuffer = phys_to_virt((unsigned long)buffer);
426 unsigned char cmd_buffer[5];
427
428 if (send_first(target, INQUIRY))
429 goto bad;
430 setup_dma(buffer, READ, 1);
431 vbuffer[8] = vbuffer[27] = 0; /* Avoid confusion with previous read data */
432 cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] = cmd_buffer[4] = 0;
433 cmd_buffer[3] = 48;
434 if (send_1_5(5, cmd_buffer, 1) ||
435 !acsi_wait_for_IRQ(TIMEOUTDMA) ||
436 get_status() ||
437 (calc_received(buffer) < 32))
438 goto bad;
439 dma_cache_maintenance((unsigned long)(buffer+8), 20, 0);
440 if (memcmp(inquire8, vbuffer+8, 20))
441 goto bad;
442 ret = 0;
443bad:
444 if (!!NET_DEBUG) {
445 vbuffer[8+20]=0;
446 printk("inquiry of target %d: %s\n", target, vbuffer+8);
447 }
448 return (ret);
449}
450
451/*
452 * read_hw_addr() reads the sector containing the hwaddr and returns
453 * a pointer to it (virtual address!) or 0 in case of an error
454 */
455
456static HADDR
457*read_hw_addr(int target, unsigned char *buffer)
458{
459 HADDR *ret = 0;
460 unsigned char cmd_buffer[5];
461
462 if (send_first(target, READSECTOR))
463 goto bad;
464 setup_dma(buffer, READ, 1);
465 cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] = cmd_buffer[4] = 0;
466 cmd_buffer[3] = 1;
467 if (send_1_5(5, cmd_buffer, 1) ||
468 !acsi_wait_for_IRQ(TIMEOUTDMA) ||
469 get_status())
470 goto bad;
471 ret = phys_to_virt((unsigned long)&(((DMAHWADDR *)buffer)->hwaddr));
472 dma_cache_maintenance((unsigned long)buffer, 512, 0);
473bad:
474 return (ret);
475}
476
477static irqreturn_t
478pamsnet_intr(int irq, void *data)
479{
480 return IRQ_HANDLED;
481}
482
483/* receivepkt() loads a packet to a given buffer and returns its length */
484
485static int
486receivepkt (int target, unsigned char *buffer)
487{
488 int ret = -1;
489 unsigned char cmd_buffer[5];
490
491 if (send_first(target, READPKT))
492 goto bad;
493 setup_dma(buffer, READ, 3);
494 cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] = cmd_buffer[4] = 0;
495 cmd_buffer[3] = 3;
496 if (send_1_5(7, cmd_buffer, 1) ||
497 !acsi_wait_for_IRQ(TIMEOUTDMA) ||
498 get_status())
499 goto bad;
500 ret = calc_received(buffer);
501bad:
502 return (ret);
503}
504
505/* sendpkt() sends a packet and returns a value of zero when the packet was sent
506 successfully */
507
508static int
509sendpkt (int target, unsigned char *buffer, int length)
510{
511 int ret = -1;
512 unsigned char cmd_buffer[5];
513
514 if (send_first(target, WRITEPKT))
515 goto bad;
516 setup_dma(buffer, WRITE, 3);
517 cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[4] = 0;
518 cmd_buffer[2] = length >> 8;
519 cmd_buffer[3] = length & 0xFF;
520 if (send_1_5(7, cmd_buffer, 1) ||
521 !acsi_wait_for_IRQ(TIMEOUTDMA) ||
522 get_status())
523 goto bad;
524 ret = 0;
525bad:
526 return (ret);
527}
528
529/* The following higher level routines work on virtual addresses and convert them to
530 * physical addresses when passed to the lowlevel routines. It's up to the higher level
531 * routines to copy data from Alternate RAM to ST RAM if neccesary!
532 */
533
534/* Check for a network adaptor of this type, and return '0' if one exists.
535 */
536
537struct net_device * __init pamsnet_probe (int unit)
538{
539 struct net_device *dev;
540 int i;
541 HADDR *hwaddr;
542 int err;
543
544 unsigned char station_addr[6];
545 static unsigned version_printed;
546 /* avoid "Probing for..." printed 4 times - the driver is supporting only one adapter now! */
547 static int no_more_found;
548
549 if (no_more_found)
550 return ERR_PTR(-ENODEV);
551 no_more_found = 1;
552
553 dev = alloc_etherdev(sizeof(struct net_local));
554 if (!dev)
555 return ERR_PTR(-ENOMEM);
556 if (unit >= 0) {
557 sprintf(dev->name, "eth%d", unit);
558 netdev_boot_setup_check(dev);
559 }
560 SET_MODULE_OWNER(dev);
561
562 printk("Probing for PAM's Net/GK Adapter...\n");
563
564 /* Allocate the DMA buffer here since we need it for probing! */
565
566 nic_packet = (struct nic_pkt_s *)acsi_buffer;
567 phys_nic_packet = (unsigned char *)phys_acsi_buffer;
568 if (pamsnet_debug > 0) {
569 printk("nic_packet at 0x%p, phys at 0x%p\n",
570 nic_packet, phys_nic_packet );
571 }
572
573 stdma_lock(pamsnet_intr, NULL);
574 DISABLE_IRQ();
575
576 for (i=0; i<8; i++) {
577 /* Do two inquiries to cover cases with strange equipment on previous ID */
578 /* blocking the ACSI bus (like the SLMC804 laser printer controller... */
579 inquiry(i, phys_nic_packet);
580 if (!inquiry(i, phys_nic_packet)) {
581 lance_target = i;
582 break;
583 }
584 }
585
586 if (!!NET_DEBUG)
587 printk("ID: %d\n",i);
588
589 if (lance_target >= 0) {
590 if (!(hwaddr = read_hw_addr(lance_target, phys_nic_packet)))
591 lance_target = -1;
592 else
593 memcpy (station_addr, hwaddr, ETH_ALEN);
594 }
595
596 ENABLE_IRQ();
597 stdma_release();
598
599 if (lance_target < 0) {
600 printk("No PAM's Net/GK found.\n");
601 free_netdev(dev);
602 return ERR_PTR(-ENODEV);
603 }
604
605 if (pamsnet_debug > 0 && version_printed++ == 0)
606 printk(version);
607
608 printk("%s: %s found on target %01d, eth-addr: %02x:%02x:%02x:%02x:%02x:%02x.\n",
609 dev->name, "PAM's Net/GK", lance_target,
610 station_addr[0], station_addr[1], station_addr[2],
611 station_addr[3], station_addr[4], station_addr[5]);
612
613 /* Initialize the device structure. */
614 dev->open = pamsnet_open;
615 dev->stop = pamsnet_close;
616 dev->hard_start_xmit = pamsnet_send_packet;
617 dev->get_stats = net_get_stats;
618
619 /* Fill in the fields of the device structure with ethernet-generic
620 * values. This should be in a common file instead of per-driver.
621 */
622
623 for (i = 0; i < ETH_ALEN; i++) {
624#if 0
625 dev->broadcast[i] = 0xff;
626#endif
627 dev->dev_addr[i] = station_addr[i];
628 }
629 err = register_netdev(dev);
630 if (!err)
631 return dev;
632
633 free_netdev(dev);
634 return ERR_PTR(err);
635}
636
637/* Open/initialize the board. This is called (in the current kernel)
638 sometime after booting when the 'ifconfig' program is run.
639
640 This routine should set everything up anew at each open, even
641 registers that "should" only need to be set once at boot, so that
642 there is non-reboot way to recover if something goes wrong.
643 */
644static int
645pamsnet_open(struct net_device *dev)
646{
647 struct net_local *lp = netdev_priv(dev);
648
649 if (pamsnet_debug > 0)
650 printk("pamsnet_open\n");
651 stdma_lock(pamsnet_intr, NULL);
652 DISABLE_IRQ();
653
654 /* Reset the hardware here.
655 */
656 if (!if_up)
657 start(lance_target);
658 if_up = 1;
659 lp->open_time = 0; /*jiffies*/
660 lp->poll_time = MAX_POLL_TIME;
661
662 dev->tbusy = 0;
663 dev->interrupt = 0;
664 dev->start = 1;
665
666 ENABLE_IRQ();
667 stdma_release();
668 pamsnet_timer.data = (long)dev;
669 pamsnet_timer.expires = jiffies + lp->poll_time;
670 add_timer(&pamsnet_timer);
671 return 0;
672}
673
674static int
675pamsnet_send_packet(struct sk_buff *skb, struct net_device *dev)
676{
677 struct net_local *lp = netdev_priv(dev);
678 unsigned long flags;
679
680 /* Block a timer-based transmit from overlapping. This could better be
681 * done with atomic_swap(1, dev->tbusy), but set_bit() works as well.
682 */
683 local_irq_save(flags);
684
685 if (stdma_islocked()) {
686 local_irq_restore(flags);
687 lp->stats.tx_errors++;
688 }
689 else {
690 int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
691 unsigned long buf = virt_to_phys(skb->data);
692 int stat;
693
694 stdma_lock(pamsnet_intr, NULL);
695 DISABLE_IRQ();
696
697 local_irq_restore(flags);
698 if( !STRAM_ADDR(buf+length-1) ) {
699 skb_copy_from_linear_data(skb, nic_packet->buffer,
700 length);
701 buf = (unsigned long)phys_nic_packet;
702 }
703
704 dma_cache_maintenance(buf, length, 1);
705
706 stat = sendpkt(lance_target, (unsigned char *)buf, length);
707 ENABLE_IRQ();
708 stdma_release();
709
710 dev->trans_start = jiffies;
711 dev->tbusy = 0;
712 lp->stats.tx_packets++;
713 lp->stats.tx_bytes+=length;
714 }
715 dev_kfree_skb(skb);
716
717 return 0;
718}
719
720/* We have a good packet(s), get it/them out of the buffers.
721 */
722static void
723pamsnet_poll_rx(struct net_device *dev)
724{
725 struct net_local *lp = netdev_priv(dev);
726 int boguscount;
727 int pkt_len;
728 struct sk_buff *skb;
729 unsigned long flags;
730
731 local_irq_save(flags);
732 /* ++roman: Take care at locking the ST-DMA... This must be done with ints
733 * off, since otherwise an int could slip in between the question and the
734 * locking itself, and then we'd go to sleep... And locking itself is
735 * necessary to keep the floppy_change timer from working with ST-DMA
736 * registers. */
737 if (stdma_islocked()) {
738 local_irq_restore(flags);
739 return;
740 }
741 stdma_lock(pamsnet_intr, NULL);
742 DISABLE_IRQ();
743 local_irq_restore(flags);
744
745 boguscount = testpkt(lance_target);
746 if( lp->poll_time < MAX_POLL_TIME ) lp->poll_time++;
747
748 while(boguscount--) {
749 pkt_len = receivepkt(lance_target, phys_nic_packet);
750
751 if( pkt_len < 60 ) break;
752
753 /* Good packet... */
754
755 dma_cache_maintenance((unsigned long)phys_nic_packet, pkt_len, 0);
756
757 lp->poll_time = pamsnet_min_poll_time; /* fast poll */
758 if( pkt_len >= 60 && pkt_len <= 2048 ) {
759 if (pkt_len > 1514)
760 pkt_len = 1514;
761
762 /* Malloc up new buffer.
763 */
764 skb = alloc_skb(pkt_len, GFP_ATOMIC);
765 if (skb == NULL) {
766 printk("%s: Memory squeeze, dropping packet.\n",
767 dev->name);
768 lp->stats.rx_dropped++;
769 break;
770 }
771 skb->len = pkt_len;
772 skb->dev = dev;
773
774 /* 'skb->data' points to the start of sk_buff data area.
775 */
776 skb_copy_to_linear_data(skb, nic_packet->buffer,
777 pkt_len);
778 netif_rx(skb);
779 dev->last_rx = jiffies;
780 lp->stats.rx_packets++;
781 lp->stats.rx_bytes+=pkt_len;
782 }
783 }
784
785 /* If any worth-while packets have been received, dev_rint()
786 has done a mark_bh(INET_BH) for us and will work on them
787 when we get to the bottom-half routine.
788 */
789
790 ENABLE_IRQ();
791 stdma_release();
792 return;
793}
794
795/* pamsnet_tick: called by pamsnet_timer. Reads packets from the adapter,
796 * passes them to the higher layers and restarts the timer.
797 */
798static void
799pamsnet_tick(unsigned long data)
800{
801 struct net_device *dev = (struct net_device *)data;
802 struct net_local *lp = netdev_priv(dev);
803
804 if( pamsnet_debug > 0 && (lp->open_time++ & 7) == 8 )
805 printk("pamsnet_tick: %ld\n", lp->open_time);
806
807 pamsnet_poll_rx(dev);
808
809 pamsnet_timer.expires = jiffies + lp->poll_time;
810 add_timer(&pamsnet_timer);
811}
812
813/* The inverse routine to pamsnet_open().
814 */
815static int
816pamsnet_close(struct net_device *dev)
817{
818 struct net_local *lp = netdev_priv(dev);
819
820 if (pamsnet_debug > 0)
821 printk("pamsnet_close, open_time=%ld\n", lp->open_time);
822 del_timer(&pamsnet_timer);
823 stdma_lock(pamsnet_intr, NULL);
824 DISABLE_IRQ();
825
826 if (if_up)
827 stop(lance_target);
828 if_up = 0;
829
830 lp->open_time = 0;
831
832 dev->tbusy = 1;
833 dev->start = 0;
834
835 ENABLE_IRQ();
836 stdma_release();
837 return 0;
838}
839
840/* Get the current statistics.
841 This may be called with the card open or closed.
842 */
843static struct net_device_stats *net_get_stats(struct net_device *dev)
844{
845 struct net_local *lp = netdev_priv(dev);
846 return &lp->stats;
847}
848
849
850#ifdef MODULE
851
852static struct net_device *pam_dev;
853
854int init_module(void)
855{
856 pam_dev = pamsnet_probe(-1);
857 if (IS_ERR(pam_dev))
858 return PTR_ERR(pam_dev);
859 return 0;
860}
861
862void cleanup_module(void)
863{
864 unregister_netdev(pam_dev);
865 free_netdev(pam_dev);
866}
867
868#endif /* MODULE */
869
870/* Local variables:
871 * compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/include
872 -b m68k-linuxaout -Wall -Wstrict-prototypes -O2
873 -fomit-frame-pointer -pipe -DMODULE -I../../net/inet -c atari_pamsnet.c"
874 * version-control: t
875 * kept-new-versions: 5
876 * tab-width: 8
877 * End:
878 */
diff --git a/include/asm-m68k/atari_SLM.h b/include/asm-m68k/atari_SLM.h
deleted file mode 100644
index 42f4fcdd8bc7..000000000000
--- a/include/asm-m68k/atari_SLM.h
+++ /dev/null
@@ -1,28 +0,0 @@
1
2#ifndef _ATARI_SLM_H
3#define _ATARI_SLM_H
4
5/* Atari SLM laser printer specific ioctls */
6
7#define SLMIOGSTAT 0xa100
8#define SLMIOGPSIZE 0xa101
9#define SLMIOGMFEED 0xa102
10
11#define SLMIORESET 0xa140
12
13#define SLMIOSPSIZE 0xa181
14#define SLMIOSMFEED 0xa182
15
16/* Status returning structure (SLMIOGSTAT) */
17struct SLM_status {
18 int stat; /* numeric status code */
19 char str[40]; /* status string */
20};
21
22/* Paper size structure (SLMIO[GS]PSIZE) */
23struct SLM_paper_size {
24 int width;
25 int height;
26};
27
28#endif /* _ATARI_SLM_H */
diff --git a/include/asm-m68k/atari_acsi.h b/include/asm-m68k/atari_acsi.h
deleted file mode 100644
index 10fea68f191a..000000000000
--- a/include/asm-m68k/atari_acsi.h
+++ /dev/null
@@ -1,37 +0,0 @@
1#ifndef _ASM_ATARI_ACSI_H
2#define _ASM_ATARI_ACSI_H
3
4/* Functions exported by drivers/block/acsi.c */
5
6void acsi_delay_start( void );
7void acsi_delay_end( long usec );
8int acsi_wait_for_IRQ( unsigned timeout );
9int acsi_wait_for_noIRQ( unsigned timeout );
10int acsicmd_nodma( const char *cmd, int enable);
11int acsi_getstatus( void );
12int acsi_extstatus( char *buffer, int cnt );
13void acsi_end_extstatus( void );
14int acsi_extcmd( unsigned char *buffer, int cnt );
15
16/* The ACSI buffer is guarantueed to reside in ST-RAM and may be used by other
17 * drivers that work on the ACSI bus, too. It's data are valid only as long as
18 * the ST-DMA is locked. */
19extern char *acsi_buffer;
20extern unsigned long phys_acsi_buffer;
21
22/* Utility macros */
23
24/* Send one data byte over the bus and set mode for next operation
25 * with one move.l -- Atari recommends this...
26 */
27
28#define DMA_LONG_WRITE(data,mode) \
29 do { \
30 *((unsigned long *)&dma_wd.fdc_acces_seccount) = \
31 ((data)<<16) | (mode); \
32 } while(0)
33
34#define ENABLE_IRQ() atari_turnon_irq( IRQ_MFP_ACSI )
35#define DISABLE_IRQ() atari_turnoff_irq( IRQ_MFP_ACSI )
36
37#endif /* _ASM_ATARI_ACSI_H */
generated by cgit v1.2.2 (git 2.25.0) at 2024-10-31 23:52:19 -0400