ide-cd: move cdrom_timer_expiry to ide-atapi.c

- cdrom_timer_expiry -> ide_cd_expiry
- remove expiry-arg to ide_issue_pc as it is redundant now
- ide_debug_log -> debug_log

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

6 files changed, 46 insertions, 45 deletions

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 8c5cf68fbd79..c110329ccb13 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -3,6 +3,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/cdrom.h>
 #include <linux/delay.h>
 #include <linux/ide.h>
 #include <scsi/scsi.h>
@@ -252,6 +253,38 @@ int ide_scsi_expiry(ide_drive_t *drive)
 }
 EXPORT_SYMBOL_GPL(ide_scsi_expiry);
 
+int ide_cd_expiry(ide_drive_t *drive)
+{
+        struct request *rq = HWGROUP(drive)->rq;
+        unsigned long wait = 0;
+
+        debug_log("%s: rq->cmd[0]: 0x%x\n", __func__, rq->cmd[0]);
+
+        /*
+         * Some commands are *slow* and normally take a long time to complete.
+         * Usually we can use the ATAPI "disconnect" to bypass this, but not all
+         * commands/drives support that. Let ide_timer_expiry keep polling us
+         * for these.
+         */
+        switch (rq->cmd[0]) {
+        case GPCMD_BLANK:
+        case GPCMD_FORMAT_UNIT:
+        case GPCMD_RESERVE_RZONE_TRACK:
+        case GPCMD_CLOSE_TRACK:
+        case GPCMD_FLUSH_CACHE:
+                wait = ATAPI_WAIT_PC;
+                break;
+        default:
+                if (!(rq->cmd_flags & REQ_QUIET))
+                        printk(KERN_INFO "cmd 0x%x timed out\n",
+                                         rq->cmd[0]);
+                wait = 0;
+                break;
+        }
+        return wait;
+}
+EXPORT_SYMBOL_GPL(ide_cd_expiry);
+
 int ide_cd_get_xferlen(struct request *rq)
 {
         if (blk_fs_request(rq))
@@ -562,11 +595,11 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
         return ide_started;
 }
 
-ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
-                             ide_expiry_t *expiry)
+ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout)
 {
         struct ide_atapi_pc *pc = drive->pc;
         ide_hwif_t *hwif = drive->hwif;
+        ide_expiry_t *expiry = NULL;
         u32 tf_flags;
         u16 bcount;
         u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
@@ -578,9 +611,11 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
         if (dev_is_idecd(drive)) {
                 tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
                 bcount = ide_cd_get_xferlen(hwif->hwgroup->rq);
+                expiry = ide_cd_expiry;
         } else if (scsi) {
                 tf_flags = 0;
                 bcount = min(pc->req_xfer, 63 * 1024);
+                expiry = ide_scsi_expiry;
         } else {
                 tf_flags = IDE_TFLAG_OUT_DEVICE;
                 bcount = ((drive->media == ide_tape) ?
@@ -613,7 +648,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
                 if (drive->dma)
                         drive->waiting_for_dma = 0;
                 ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
-                                    timeout, NULL);
+                                    timeout, expiry);
                 return ide_started;
         } else {
                 ide_execute_pkt_cmd(drive);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 8d3c7714682e..105e4d855e6e 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -511,38 +511,6 @@ end_request:
         return 1;
 }
 
-static int cdrom_timer_expiry(ide_drive_t *drive)
-{
-        struct request *rq = HWGROUP(drive)->rq;
-        unsigned long wait = 0;
-
-        ide_debug_log(IDE_DBG_RQ, "Call %s: rq->cmd[0]: 0x%x\n", __func__,
-                      rq->cmd[0]);
-
-        /*
-         * Some commands are *slow* and normally take a long time to complete.
-         * Usually we can use the ATAPI "disconnect" to bypass this, but not all
-         * commands/drives support that. Let ide_timer_expiry keep polling us
-         * for these.
-         */
-        switch (rq->cmd[0]) {
-        case GPCMD_BLANK:
-        case GPCMD_FORMAT_UNIT:
-        case GPCMD_RESERVE_RZONE_TRACK:
-        case GPCMD_CLOSE_TRACK:
-        case GPCMD_FLUSH_CACHE:
-                wait = ATAPI_WAIT_PC;
-                break;
-        default:
-                if (!(rq->cmd_flags & REQ_QUIET))
-                        printk(KERN_INFO PFX "cmd 0x%x timed out\n",
-                                         rq->cmd[0]);
-                wait = 0;
-                break;
-        }
-        return wait;
-}
-
 /*
  * Set up the device registers for transferring a packet command on DEV,
  * expecting to later transfer XFERLEN bytes.  HANDLER is the routine
@@ -574,7 +542,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
 
                 /* packet command */
                 ide_execute_command(drive, ATA_CMD_PACKET, handler,
-                                    ATAPI_WAIT_PC, cdrom_timer_expiry);
+                                    ATAPI_WAIT_PC, ide_cd_expiry);
                 return ide_started;
         } else {
                 ide_execute_pkt_cmd(drive);
@@ -621,7 +589,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
         }
 
         /* arm the interrupt handler */
-        ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry);
+        ide_set_handler(drive, handler, rq->timeout, ide_cd_expiry);
 
         /* ATAPI commands get padded out to 12 bytes minimum */
         cmd_len = COMMAND_SIZE(rq->cmd[0]);
@@ -1088,7 +1056,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
         } else {
                 timeout = ATAPI_WAIT_PC;
                 if (!blk_fs_request(rq))
-                        expiry = cdrom_timer_expiry;
+                        expiry = ide_cd_expiry;
         }
 
         ide_set_handler(drive, cdrom_newpc_intr, timeout, expiry);
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index 389faa42eaa1..bf676b262181 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -16,10 +16,6 @@
 #define ide_debug_log(lvl, fmt, args...) do {} while (0)
 #endif
 
-/*
- * typical timeout for packet command
- */
-#define ATAPI_WAIT_PC           (60 * HZ)
 #define ATAPI_WAIT_WRITE_BUSY   (10 * HZ)
 
 /************************************************************************/
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 1f07f3818938..fdec729d0e49 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -197,7 +197,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
 
         pc->retries++;
 
-        return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL);
+        return ide_issue_pc(drive, WAIT_FLOPPY_CMD);
 }
 
 void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index a2d470eb2b55..ac9e29a4991f 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -694,7 +694,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
 
         pc->retries++;
 
-        return ide_issue_pc(drive, WAIT_TAPE_CMD, NULL);
+        return ide_issue_pc(drive, WAIT_TAPE_CMD);
 }
 
 /* A mode sense command is used to "sense" tape parameters. */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index e35ff6827897..e20e0b5c1739 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -396,6 +396,7 @@ enum {
  * This is used for several packet commands (not for READ/WRITE commands).
  */
 #define IDE_PC_BUFFER_SIZE      256
+#define ATAPI_WAIT_PC           (60 * HZ)
 
 struct ide_atapi_pc {
         /* actual packet bytes */
@@ -1253,10 +1254,11 @@ static inline unsigned long ide_scsi_get_timeout(struct ide_atapi_pc *pc)
 }
 
 int ide_scsi_expiry(ide_drive_t *);
+int ide_cd_expiry(ide_drive_t *);
 
 int ide_cd_get_xferlen(struct request *);
 
-ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int, ide_expiry_t *);
+ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int);
 
 ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);